Etymotic Research | Isolator ER-6i | ER4 User Manual

TABLE OF CONTENTS
About Etymotic Research, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
About ER-4 Earphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
System Includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Eartips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Changing Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Proper Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Noise Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Response Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Testing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .back cover
1
ABOUT ET YMOTIC RESEARCH INC.
ABOUT
ABOUTETER-4
YMOTIC
EARPHONES
RESEARCH
Etymotic Research, Inc. (ER) is a research, development and manufacturing
company that designs products to measure, improve and protect hearing.
ER has developed some of the most innovative hearing technology available
today. Etymotic means“true to the ear.”
In-the-ear, high fidelity transducers combine flat frequency response
with isolation from external noise. Noise reduction with ER-4 MicroPro
earphones occurs naturally when the eartips are sealed in the ears. Other
earphones with active noise-canceling add circuit noise and require batteries.
Other ETYMOTIC RESEARCH products:
The 3-flange eartips provide 35 dB average external noise isolation. Foam
eartips provide 42 dB average external noise isolation. Lowering surrounding
noise allows the listener to hear the full dynamic range of recordings at lower
reproduction levels.
ER•6 Isolator™ Earphones
6i Isolator™ Earphones
Musicians Earplugs™ (custom hearing protection)
ETY•Plugs™ ER-20 High Fidelity Earplugs
ETY•COM™ handsfree headset for mobile phones
WARRANT Y
Etymotic Research, Inc. warrants this product against defects in material
or workmanship for a period of two-years from the date of original purchase
from an authorized Etymotic distributor or reseller.
ER-4 MicroPro earphones are ideal for a variety of consumer uses
such as MP3 players, CD and DVD players and computers. Professional
uses include mixing and stage monitoring in the studio and during live
performance.
ER will repair or replace the defective product at its option if returned within
the warranty period to our service facility. This warranty is in lieu of all other
warranties, expressed or implied, including, but not limited to, any implied
warranty of merchantability or fitness for a particular purpose.
2
3
ABOUT DESCRIPTIONS
ET YMOTIC RESEARCH
ER-4B
ER-4S
ER-4P
•
•
•
•
•
•
•
•
•
•
•
Lightweight and portable
High accuracy
Noise isolation (20-25 dB)
Enhanced bass response
Higher sound output
ER-4S (stereo) earphones have a flat frequency response that is the closest
to a perfect fidelity response of any in-the-ear earphones, and equal to that
of electrostatic earphones that costs thousands of dollars. These earphones
can be used with a headphone amplifier when using low power portable
devices.
ER-4P (portable) earphones have 12 dB higher overall sensitivity and
enhanced bass compared to the ER-4S. ER-4P earphones can be used with
portable players without requiring an additional amplifier. For those who
want the features of both the 4P and 4S, a special connector is available to
convert 4P into 4S earphones.
ABOUT
SYSTEM
ET YMOTIC
INCLUDES
RESEARCH
• ER•4 MicroPro earphones
• 5 ft. cord with 3.5 mm stereo phone plug
• 1⁄4" stereo phone adapter plug
• Six 3-flange eartips
• 10 foam eartips (medium)
• Filter changing tool
• 4 replacement filters
• Shirt clip
• Pouch
• Storage box
OPTIONAL ACCESSORIES
Airline audio
jack adapter
Cable to convert
“P” to “S”
ER-4B (binaural) earphones are used for monitoring recordings that are not
equalized for loudspeaker playback. The 4B frequency response is similar to
that of the 4S, but has 5 dB more output in the 5-16 kHz region.
4
Replacement items and accessories are available at www.etymotic.com.
5
EARTIPS
INSERTION
In addition to six 3-flange eartips, ER-4 MicroPro earphones are
supplied with ten disposable foam eartips. Both types provide excellent
sound reproduction when properly inserted.
3-flange eartips
These reusable eartips should be cleaned regularly.
Depending on which ER-4 version you have, identify the earphones by
color (red = right; blue = left) or letter designator (R=right; L=left).
Try the 3-flange and foam eartips to determine the best fit for comfort
and isolation. The sound quality and noise isolation depend on how well the
eartips seal. If the earphones seem to lack bass, insert the earplug deeper
into the ear canal to obtain a better seal, or try the other eartip option.
Cleaning the 3-flange eartips
1. Carefully remove the eartip from the earphone.
2. Use water and mild soap to remove dirt and earwax from the eartip.
3. Rinse and completely dry the eartip.
4. Push the eartip on the stem until it rests against the large edge of the barrel.
3-flange eartip insertion
• For best results, moisten the plastic eartip before insertion.
• Carefully insert one earphone at a time, pulling up
and out on the back of the ear. The earphone should
seal deeply and comfortably in the ear canal.
Foam eartips
• Disposable foam eartips compress to a tight seal that holds the earphones
firmly in place.
• The eartips at the end of the earphones can be replaced
by sliding them off and on. A combination of twisting and
pulling is recommended for eartip removal. Be careful not
to bend the earphone.
Foam eartip insertion
• Use a foam eartip if a good seal cannot be obtained with a white eartip.
• Compress the foam at the end of the earphone by rolling it between your
thumb and forefinger before inserting it. Hold the earphone in place for
about 10 seconds while the foam expands to create a tight seal.
A video demonstration on how to insert the earphones is available on our
website at www.etymotic.com.
REMOVAL
Beige foam eartip
(sm–optional)
Black foam eartip
(med–included)
Yellow foam eartip
(lg–optional)
6
Remove earphones slowly with a twisting motion to gradually break the seal.
7
CHANGING FILTERS
PROPER C ARE
ER-4 MicroPro earphones have special filters that smooth the frequency
response and prevent earwax from entering the earphones. These filters,
identified by a green acoustic mesh in a small metal barrel, are located at the
end of the earphone and are visible when the eartip is removed. If the filters
become clogged they should be replaced. A dirty filter will reduce or block
the earphone output. The frequency with which the filters need to be
changed will vary widely among users. The filters should be changed if the
volume decreases or the sound quality declines.
Note: Once removed, the filters are not reusable.
• Do not expose earphones to extreme temperatures.
• Avoid dropping or strong impact. Extreme shock can damage the earphones.
• Always leave an eartip on the earphone for shock protection.
• Keep earphones away from water as this can adversely affect sound quality.
Perspiration entering the nozzle may cause the earphone to temporarily
stop working. Normal operation usually returns after the earphone dries out.
• Do not pull on the cord to remove it from the jack or from the ear.
Filter Removal
• Avoid bending the barrel in the center of the cord.
• Clean or replace the 3-flange eartips prior to use by others.
1. Remove eartip.
2. Push the screw into the old filter with a slow twisting
motion until it grabs the filter; then pull straight out.
• Replace disposable foam eartips regularly.
Filter Replacement
• Earwax buildup can reduce the earphone output. When the filters become
clogged they should be replaced. See Changing the Filters on page 8.
3. Insert a new filter.
4. Gently press flush
against a flat surface.
8
5. Attach eartip.
9
NOISE ISOLATION
ABOUT
RESPONSE
ET YMOTIC
ACCURACY
RESEARCH
ER-4S (foam)
ER-4S
ER-4S (3-flange)
ER-4P
ER-6 (foam)
ER-6
ER-6 (2-flange)
6i
6i (3-flange)
Best Active
Noise-Canceling
Earphone
Response Accuracy
Noise Isolation
Etymotic earphones have the highest noise reduction of all
noise-canceling earphones.
True high fidelity sound reproduction requires the reproduced sound to be as
close as possible to the sound of a live performance. Etymotic earphones are
designed to match the acoustic response of the open ear.
ER-4S MicroPro Earphones
ER-4P MicroPro Earphones
ER-6 Isolator Earphones
6i Isolator Earphones
ER-4 MicroPro Earphones 35-42 dB
ER-6 Isolator Earphones 34-36 dB
6i Isolator Earphones
34-36 dB
10
92%
86%
90%
82%
11
ABOUT
TESTING
ET YMOTIC
INFORMATION
RESEARCH
How We Measure Noise Isolation
Real-Ear-Attenuation-at-Threshold (REAT) Method—The ANSI standard
method of measuring the noise attenuation of hearing protectors and
earphones is to compare the quietest sound heard with the earphone in place
to the quietest sound heard with the ears open. This REAT method is the basis
for all OSHA Noise Reduction Ratings (NRR). ER-4 and ER-6 earphones were
measured with the REAT method at E-A-RCAL Laboratories, Indianapolis IN.
How We Measure Response Accuracy
Earphone response was measured on a KEMAR® manikin which has the same
acoustic properties as the average head and ear. 25-band accuracy scores are
calculated by summing the difference between the earphone response and
the target response in each 1/3-octave band from 50 Hz to 12.5 kHz.
ABOUTSPECIFIC
ET YMOTIC
RESEARCH
ATIONS
Frequency response: 50-10 kHz ± 2 dB; 20-16 kHz ±4 dB
Acoustic polarity: + electrical = + acoustic
Transducer type: balanced armature
1 kHz sensitivity (ER-4B/ER-4S): 108 dB SPL for a 0.79 V input
(90 dB @ 0.1 V; 100 dB @ 1mW)
1 kHz sensitivity (ER-4P): 108 dB SPL for a 0.2 V input
(102 dB @ 0.1 V; 106 dB @ 1mW)
Impedance (ER-4B/ER-4S): 100 Ohms nominal
Impedance (ER-4P): 27 Ohms nominal
Maximum output: 122 dB SPL
Maximum continuous input (ER-4B/ER-4S): 3.0 Vrms
Maximum continuous input (ER-4P): .75 Vrms
Cable: 5' with 3.5 mm stereo plug
Weight: less than 1 oz.
Why sealing in the ear works better than electronic
noise cancellation
Active noise-cancellation circuits add noise that is noticeable in quiet
surroundings.The best solution to reducing noise is the simplest.With
Etymotic earphones, high noise isolation is achieved naturally with eartips
that slide in your ears like earplugs to block out external noise. The result is
clean, clear undistorted music with twice the noise reduction (35-42 dB) of
typical electronic noise-canceling earphones (15-21 dB).
12
13
C AUTION
Consult a physician or audiologist if you have excessive ear wax, difficulty
inserting the eartips, or discomfort after prolonged use.
ER-4 MicroPro earphones exclude most external sounds even at low listening
volumes. It is unsafe to use insert earphones while driving a motorized
vehicle, operating machinery, bicycling or jogging, because you may not be
alerted to potential danger.
Do not use the earphones at excessively loud levels. Noise-induced
hearing loss is a function of exposure time, the average sound level and the
peak of very loud sounds. Decreased listening levels allow for longer periods
of safe listening time.
ETYMOTIC RESEARCH INC.
61 Martin Lane • Elk Grove Village, IL 60007
www.etymotic.com • 1-888-ETYMOTIC
ER-6 Isolator™ and ER-4 MicroPro™ are trademarks of Etymotic Research, Inc.
The ER-4 MicroPro™ Earphones and ER-6 Isolator™ Earphones are covered by one or more
of the following U.S. patents: #4,677,679, #4,763,753, #5,887,070 and other patents pending.
©2006
ER004015A 1-06
®