Samsung E317 - SGH Cell Phone User manual

SGH-e317
Portable Digital Telephone
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
GH68-05357A
English 06/2004
UCDF3._wbe317_070104.d4
Intellectual Property
All Intellectual Property, as defined below, owned by
or which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the “Phone System”), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents,
trade secrets, copyrights, software, computer
programs, and related documentation and other
works of authorship. You may not infringe or otherwise
violate the rights secured by the Intellectual Property.
Moreover, you agree that you will not (and will not
attempt to) modify, prepare derivative works of,
reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the
software. No title to or ownership in the Intellectual
Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG
and its suppliers.
ii
Samsung Telecommunications America, L.P.
U.S. Headquarters:
1301 East Lookout Drive
Richardson, TX 75082
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/
wireless
©2004 Samsung Telecommunications America. All
rights reserved. No reproduction in whole or in part
allowed without prior written approval. Samsung is
a registered trademark of Samsung Electronics
America, Inc. and its related entities.
iii
iv
Table of Contents
Unpacking .............................................................. 7
Your Phone ............................................................ 9
Phone Layout ................................................................. 9
Display......................................................................... 13
Service Light................................................................. 16
Getting Started .................................................... 17
Installing the SIM Card................................................... 17
Charging a Battery ........................................................ 19
Switching the Phone On/Off ............................................ 21
Call Functions ...................................................... 23
Making a Call ................................................................
Adjusting the Volume .....................................................
Answering a Call............................................................
Viewing Missed Calls ......................................................
Quickly Switching to Silent Mode .....................................
23
25
26
27
29
Selecting Functions and Options .......................... 31
Phonebook ........................................................... 33
Storing a Number with a Name........................................
Using Phonebook Entry Options .......................................
Searching for and Dialing a Number in Phonebook .............
Editing a Caller Group ....................................................
Speed-dialing................................................................
Checking the Memory Status...........................................
Deleting All of the Phone Book Entries ..............................
Using the Service Dialing Numbers...................................
33
35
36
38
39
40
40
41
Entering Text ....................................................... 43
Changing the Text Input Mode ........................................
Using T9 Mode ..............................................................
Using the Upper/Lower-Case Alphabet Mode .....................
Using Number Mode.......................................................
44
45
46
47
iv
Using Symbol Mode ....................................................... 48
Options During a Call ........................................... 49
Putting a Call on Hold.....................................................
Switching the Microphone Off (Mute)................................
Muting/Sending Key Tones..............................................
Sending Tones ..............................................................
Searching for a Number in Phonebook ..............................
Call Waiting ..................................................................
Making a Multi-party Call ................................................
49
50
50
50
51
51
52
Using the Menus .................................................. 55
Accessing a Menu Function by Scrolling ............................ 55
Accessing a Menu Function by Using Its Shortcut ............... 56
List of Menu Functions.................................................... 56
Recent Calls ......................................................... 63
Missed Calls..................................................................
Calls Received...............................................................
Calls Made....................................................................
Voice Mail.....................................................................
Delete All .....................................................................
Call Time......................................................................
63
63
64
64
64
65
Messaging ............................................................ 67
Text Messages ..............................................................
Delete All .....................................................................
Multimedia Messages .....................................................
Delete All .....................................................................
Memory Status..............................................................
Instant Messaging (IM) ..................................................
E-Mail Messages ............................................................
Push Message ...............................................................
67
74
76
83
84
85
90
99
Network Services ............................................... 101
Call Forwarding ........................................................... 101
Call Barring ................................................................ 102
v
Call Waiting ................................................................
Network Selection........................................................
Caller ID ....................................................................
Closed User Group (CUG) .............................................
104
104
105
105
Camera .............................................................. 109
Take Photos................................................................
My Photos ..................................................................
Delete All ...................................................................
Memory Status............................................................
109
116
117
117
MEdia Mall.......................................................... 119
Shop Ringtones ...........................................................
Shop Games ...............................................................
Shop Graphics.............................................................
Shop Multimedia..........................................................
Shop Applications ........................................................
MEdia Home ...............................................................
119
119
120
120
120
121
Sound Settings................................................... 123
Ring Tone...................................................................
Ring Volume ...............................................................
Shop Ringtones ...........................................................
Alert Type ..................................................................
Keypad Tone...............................................................
Message Tone .............................................................
Folder Tone ................................................................
Power On/Off ..............................................................
Alerts on Call ..............................................................
Extra Tones ................................................................
123
123
123
124
124
124
126
126
126
127
Applications ....................................................... 129
Alarm ........................................................................
Calendar ....................................................................
Time & Date ...............................................................
Calculator...................................................................
To Do List...................................................................
Voice Memo ................................................................
Currency Exchange ......................................................
129
130
133
134
134
137
140
vi
My MEdia............................................................ 141
MEdia Net...................................................................
Games .......................................................................
Audio.........................................................................
Graphics.....................................................................
Delete All ...................................................................
Memory Status............................................................
141
146
147
147
147
148
Phone Settings................................................... 149
Display Settings ..........................................................
Greeting Message ........................................................
Own Number ..............................................................
Language ...................................................................
Security .....................................................................
Extra Settings .............................................................
Short Cut ...................................................................
TTY Setting.................................................................
Reset Settings.............................................................
149
151
151
151
152
155
156
156
157
Solving Problems ............................................... 159
Access Codes ..................................................... 163
Phone Password ..........................................................
PIN............................................................................
PUK ...........................................................................
PIN2 ..........................................................................
PUK2 .........................................................................
163
164
164
165
165
Health and Safety Information........................... 167
Exposure to Radio Frequency (RF) Signals ......................
For Body Operation......................................................
Precautions When Using Batteries ..................................
Road Safety................................................................
Operating Environment ................................................
Electronic Devices........................................................
Potentially Explosive Environments ................................
Emergency Calls..........................................................
vii
167
169
170
171
173
173
175
175
Other Important Safety Information............................... 176
Care and Maintenance.................................................. 177
Acknowledging Special Precautions and
the FCC and Industry Canada Notice .............................. 178
Appendix A: CERTIFICATION INFORMATION
(SAR) ................................................................. 181
Appendix B: Guide to Safe and Responsible Wireless
Phone Use .......................................................... 185
Appendix C: Consumer Update on Wireless
Phones .............................................................. 189
Glossary ............................................................. 205
Index ................................................................. 209
viii
Unpacking
1. Your package contains the following items:
Handset
Battery
Travel Adapter
User Guide
Ear Microphone
Unpacking
7
Your local Samsung dealer can provide you with additional
accessories including:
♦Simple hands-free kit
♦Standard battery
♦Car power charger
♦Holster
♦Ear microphone
♦Leather Case
Unpacking
8
Your Phone
Phone Layout
The following illustrations show the main elements of your
phone:
Your Phone
9
Key(s)
Description
In Menu mode, scroll through the
menus.
In Idle mode, allows you to access
your favorite menus directly. For more
information about shortcuts, see
“Short Cut” on page 156.
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the next menu.
In Idle mode, allows you to access
your favorite menus directly. For more
information about shortcuts, see
“Short Cut” on page 156.
Perform the functions indicated by the
text above them, on the bottom line of
the display.
(soft keys)
Your Phone
10
Key(s)
Description (Continued)
In Idle mode, launches the WAP
(Wireless Application Protocol)
browser.
In menu mode, selects the highlighted
menu.
Makes or answers a call.
When held down in Idle mode, recalls
the last number dialed or received.
In Menu mode, selects a menu
function or stores information that you
have entered, such as a name in the
phone or SIM memory.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Ends a call. Also switches the phone
on and off when held down.
In Menu mode, cancels your input
and returns to Idle mode.
When held down in Idle mode,
accesses your voice mail.
Your Phone
11
Key(s)
Description (Continued)
Enter numbers, letters and some
special characters.
Enter special characters.
Perform various functions.
(on the side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode, adjusts the keypad tone
volume.
In Menu mode, scrolls through the
menus and Phonebook.
(on the right side of the phone)
In Standby mode, turns the camera
on when held down. In Capture mode,
works as a camera shutter.
Press this button to launch the
camera.
Your Phone
12
Display
Display Layout
The display has three areas:
Area
Description
First line
Displays various icons. See
page 14.
Middle lines
Displays messages,
instructions, and any information
that you enter, such as the
number you are dialing.
Last line
Shows the functions currently
assigned to the two soft keys.
Your Phone
13
Icons
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better
the signal.
If this icon is gray, you are outside your
network area and are restricted to
emergency calls only.
Appears when you are connected to the
GPRS network.
Appears when a call is in progress.
Appears when a call is outside the
network area.
Appears when you set an alarm to ring at
a specified time.
Appears when you are entering text to
indicate the current text input mode.
Appears when a new text message is
received.
Your Phone
14
Icon
Description
Appears when a new voice mail
message is received.
Appears when a new multimedia
message has been received.
Appears when Mute mode is active.
Appears when Silent mode is active or
you set the Alert Type menu (Menu
6.4), so that the phone vibrates when
you receive a call. For further details,
see page 29 and page 124 respectively.
Shows the level of your battery. The
more bars you see, the more power you
have left.
Your Phone
15
Backlight
A backlight illuminates the display and the keypad. When
you press any key or open the folder, the backlight turns
on. It turns off when no keys are pressed within a given
period of time, depending on your setting in the Back
Light menu (Menu 9.1.5). After one minute, the display
turns off to conserve your battery power.
To specify the length of time the backlight is active, set the
Back Light menu (Menu 9.1.5). See “Back Light” on
page 150 for further details.
Service Light
The service light is at the top right-hand corner of the
phone. It flashes when services are available on the
phone.
To activate or deactivate the use of the service light, set
the Service Light menu (Menu 9.1.6). See “Service Light”
on page 150 for further details.
Your Phone
16
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and many others.
Important! The plug-in SIM card and its contacts can be
easily damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
Keep all SIM cards out of the reach of small children.
1. If necessary, turn off the phone by holding down the
until the power-off image displays.
key
2. Remove the battery. To do so:
• Press and hold the battery lock above the battery upward
toward the top of the phone.
3. Lift the battery away, as shown.
Getting Started
17
4. Slide the SIM card into the SIM card socket so that it locks the
card into place. Make sure the gold contacts of the card face
into the phone.
Note: When you need to remove the SIM card, slide it, as shown, and take it
out of the socket.
Getting Started
18
5. Place the battery so that the tabs on the end align with the
slots at the bottom of the phone.
6. Press the battery until it clicks into place. Make sure that the
battery is properly installed before switching the phone on.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
Getting Started
19
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the first
time. A discharged battery is fully recharged in approximately 200 minutes.
1. With the battery in position on the phone, plug the connector
of the travel adapter into the jack at the bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the power
outlet and disconnect it from the phone by pressing the gray
Getting Started
20
tabs on both sides of the connector and pulling the connector
out.
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, you hear a warning tone and a message
repeats at regular intervals on the display. When this
happens, your phone turns off the backlight to conserve
the remaining battery power.
When the battery level gets too low, the phone
automatically turns off.
Switching the Phone On/Off
1. Open the folder.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter the phone password, enter the
password and press the OK soft key. The phone password is
Getting Started
21
factory set to “00000000.” For further details, see “Change
Password” on page 153.
4. If the phone asks for a PIN, enter the PIN and press the OK
soft key. For further details, see “Change PIN” on page 152.
The phone searches for your network and after finding it,
the idle screen displays. Now, you can make or receive a
call.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu (Menu 9.4). For further details, see
“Language” on page 151.
5. When you wish to switch the phone off, press and hold the
key until the power-off image displays.
Getting Started
22
Call Functions
Making a Call
When the idle screen displays, enter the area code and
phone number, and press the
key.
Note: When you activate the Auto Redial option in the Extra Settings menu
(Menu 9.6), the phone automatically redials up to ten times when the person
does not answer the call or is already on the phone.
Making an International Call
1. Press and hold the
key.
The + character appears.
2. Enter the country code, area code, and phone number and
press the
key.
Call Functions
23
Correcting the Number
To clear
Press the
the last digit
displayed
any other digit
in the number
key
Left or Right key until the cursor
is immediately to the right of the
digit to be cleared. Press the
key. You can also insert a
missing digit simply by pressing
the appropriate key.
the whole
display
key and hold it for more
than one second.
Ending a Call
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers you dialed, received or
missed if the caller is identified. See “Recent Calls” on
page 63 for further details.
To recall any of these numbers:
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the
key to display a list of the last numbers in the
order you made or received.
Call Functions
24
3. Use the Up and Down keys to scroll through the numbers until
the number you want highlights.
To
Press the
dial the number
edit the number
key.
Options soft key and
select Edit. Then change
the number, referring to
“Correcting the Number”
on page 24.
delete the number Options soft key and
select Delete.
delete all of the
numbers
Options soft key and
select Delete All.
Making a Call from Phonebook
You can store frequently used phone numbers in the SIM
card or the phone’s memory, which are collectively called
Phonebook. Simply select a name to recall the associated
number. For further details about the Phonebook features,
see page 33.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Call Functions
25
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the keypad tone volume
using these keys.
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call animation.
When the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook, displays.
1. If necessary, open the folder. Press the
soft key to answer the incoming call.
key or the Accept
If the Anykey Answer option in the Extra Settings menu
(Menu 9.6) is activated, you can press any key to answer a
call except for the
key and the Reject soft key.
If the Open to Answer option in the Extra Settings menu
(Menu 9.6) is activated, you can answer the call simply by
opening the folder.
Call Functions
26
Note: To reject an incoming call, press and hold the Volume
keys on the left side of the phone before opening the folder, or
press the Reject soft key or
key.
2. End the call by closing the folder or pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you missed displays on the idle
screen immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
The number corresponding to the most recent missed call
displays, if available.
To
scroll through the
missed calls
call the number
displayed
edit or delete a missed
call number
Press the
Up or Down key.
key.
Select soft key. See
below.
Call Functions
27
Editing a Missed Call Number
Note: When the number corresponding to the missed call is not available, the
Edit option does not display.
3. Press the Options soft key.
4. Press the Up or Down key to highlight the Edit option.
5. Press the Select soft key.
6. Change the number.
To
Press the
call the number
key.
store the number
Save soft key and enter
the name and location.
For further details, see
page 33.
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to highlight the Delete
option.
3. Press the Select soft key.
You can press the
Call feature.
key at any time to exit the Missed
Note: You can access the Missed Call feature at any time by selecting the
Missed Calls menu (Menu 1.1).
Call Functions
28
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the
key until the “Silent
Mode” message and the Vibration icon ( ) display.
In Silent Mode, instead of sounds, your phone will vibrate,
flash its’ light, or do nothing depending on the function and
situation.
To exit and reactivate the previous sound settings, press
and hold the
key again until the “Exit Silent Mode”
appears. The Vibration icon
no longer displays.
While in Silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Alert Type (Menu 6.4)
Vibration
Keypad Tone (Menu 6.5)
Off
Message Tone (Menu 6.6)
Off
Folder Tone (Menu 6.7)
Off
Power On/Off
Classical
Alerts On Call (Menu 6.9)
On
Extra Tones (Menu 6.0)
Off
To exit and reactivate the previous sound settings, press
and hold the
key again until “Exit Silent Mode” appears.
The Vibration icon ( ) no longer displays.
Call Functions
29
Call Functions
30
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize your phone. These functions are arranged in
menus and sub-menus, accessed using the two soft keys
marked
and
. Each menu and sub-menu allows you
to view and alter the settings of a particular function.
The roles of the soft keys vary according to the function
you are currently using; the label on the bottom line of the
display just above each key indicates its current role.
To view the various functions and options available and to
select the one you want:
Selecting Functions and Options
31
1. Press the appropriate soft key.
To
Press the
select the:
• function displayed
• option highlighted
Select soft key or
the Right key.
view the next function
or highlight the next
option on a list
Down key or
key
on the left side of the
phone.
move back to the
previous function or
option on a list
Up key or
key on
the left side of the
phone.
move back up one
level in the structure
Left key,
soft key
or
key.
exit the structure
without changing the
settings
key.
In some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key.
Note: When you access a list of options, your phone highlights the current
option. If, however, there are only two options, such as On/Off or Enable/
Disable, your phone highlights the option that is not currently active so that you
can select it directly.
Selecting Functions and Options
32
Phonebook
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in Idle mode
• Using the New Entry option in the Phonebook menu
Storing a Number in Idle Mode
When you enter a number, Save appears above the left
soft key to allow you to store the number in Phonebook.
1. Enter the number you want to store.
Note: If you make a mistake while entering a number, correct it
using the
key.
2. To save the number, press the Save soft key.
3. Select an icon to identify the category of the number to be
stored. Three categories are available:
•
: Mobile phone number
•
: Office number
•
: Home number
To select the category, press the Left or Right key and press
the Select soft key.
4. Choose either SIM Memory or Phone Memory to store the
number.
5. Enter a name and press the OK soft key.
Phonebook
33
The maximum length you can enter for a name depends on
your SIM card.
Note: When you change phones, any numbers stored in your
SIM card memory are automatically available with the new
phone, whereas any numbers stored in the phone’s memory
must be reentered.
6. Press the OK soft key to store the name and number. The
new Phonebook entry displays.
To
use the entry options
return to the idle screen
Press the
Options soft key.
For further details,
see page 35.
key.
Storing a Number Using the Phonebook Menu
1. At the idle screen, press the Name soft key.
2. Scroll to New Entry by pressing the Up or Down key and
press the Select soft key.
3. Select an icon to identify the category of the number to be
stored by pressing the Left or Right key, and press the Select
soft key.
Note: The E-mail icon is available in this step. It allows you to save an Email address instead of a phone number.
4. Choose either SIM Memory or Phone Memory to store the
number.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on your SIM card.
Phonebook
34
6. Enter a number or address you want to store and press the
Save soft key.
Using Phonebook Entry Options
While accessing any Phonebook entry, press the Options
soft key to use the options for the entry.
To
select the
highlighted option
Press the
Select soft key or the Left
key.
highlight a different Up or Down key until the
option
option you want highlights.
The following options are available:
Paste: allows you to paste the number into the normal
dialing mode. Use this option to dial a number similar to
one in Phonebook, such as a different extension in the
same office.
Use the
key to change the number as required; see
page 24 for further details. When you are ready to dial,
press the
key.
Edit: allows you to edit the name and/or number.
Photo Caller ID: allows you to select or take a photo to
use for a name or number.
Delete: allows you to erase the name and number from
Phonebook. You are asked to confirm that you wish to
erase the name and number by pressing the Yes soft key.
Copy: allows you to copy the number to another location.
You can select the memory and the location number.
Phonebook
35
Caller Group: allows you to organize your Phonebook
entry in caller groups so that the phone alerts you in a
specific way when a person from one of your groups calls
you. Select one of the ten groups available.
To remove an entry from a group, select the No Group
option.
For more information about how to change caller group
properties, see page 38.
Add Entry: allows you to add a new number to the
currently selected name.
Searching for and Dialing a Number in Phonebook
After storing numbers in Phonebook, you can search for
them in two ways; by name and by caller group.
Searching for a Number by Name
1. At the idle screen, press the Name soft key.
2. Press the Select soft key when Search highlights. You are
asked to enter a name.
3. Enter the first few letters of the name.
The Phonebook entries are listed, starting with the first
entry matching your input.
To
view the highlighted
entry
Phonebook
36
Press the
View soft key.
To
Press the
select a different
entry
Up or Down key until
the entry you want
highlights.
look for a name
starting with a
different letter
key labeled with the
letter you want.
4. Once you have found the entry, press the
key to dial the
number, or press the Options soft key to access the
Phonebook entry options; for further details, see page 35.
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name soft key.
2. Scroll to Group Search by pressing the Up or Down key and
press the Select soft key. You are asked to enter a group
name.
3. Enter the first few letters of the group name that you wish to
find.
The caller groups are listed, starting with the first group
matching your input.
4. Scroll to the group you want by pressing the Up or Down key
and press the View soft key.
The Phonebook entries in the caller group are listed.
Phonebook
37
To
Press the
view the
highlighted entry
View soft key.
select a different
entry
Up or Down key until the
entry you want highlights.
5. Once you have found the entry, press the
key to dial the
number, or press the Options soft key to access the
Phonebook entry options; for further details, see page 35.
Editing a Caller Group
6. When the idle screen displays, press the Name soft key.
7. Scroll to Group Edit by pressing the Up or Down key and
press the Select soft key.
8. Scroll through the group list by pressing the Up or Down key.
9. When the group you want highlights, press the Options soft
key.
10. Select each option and change the settings, as required. The
following options are available:
• Call Ring Tone: allows you to set the ring tone to be used
when you receive a voice call from a person in the group.
• SMS Tone: allows you to set the ring tone to be used
when you receive a text message from a person in the
group.
• Graphic: allows you to set the graphic icon to be
displayed when you receive a voice call from a person in
the group.
Phonebook
38
• Group Name: allows you to assign a name to the group.
For further details about how to enter characters, see
page 43.
11. When you are finished, press the
or
key.
Speed-dialing
Once you have stored phone numbers in the SIM card,
you can set up to eight speed-dial entries and then dial
them easily whenever you want, simply by pressing the
associated number key.
Setting Up Speed-dial Entries
1. At the idle screen, press the Name soft key.
2. Scroll to Speed Dial by pressing the Up or Down key and
press the Select soft key.
3. Select the key to which you wish to assign the speed-dialing
number, from the
keys, and press the OK soft
key.
Note: Memory location 1 is reserved for your Voice Mail server number.
If you have already assigned a number to the key, the Options
soft key replaces the OK soft key. Go to step 6.
4. Select a Phonebook entry and press the View soft key.
5. Select a number if the entry has more than one number, by
pressing the Up or Down key and press the Select soft key.
6. Once you have assigned a number to the selected key, you
can use the following options by pressing the Options soft
key:
• Change: allows you to assign a different number to the
key.
Phonebook
39
• Delete: allows you to clear the setting so that no
number is assigned to the key.
• Delete All: allows you to clear the settings for all keys
so that no numbers are assigned to any of the keys.
• Number: allows you to view the number assigned to the
key.
7. When you are finished, press the
or
key.
Speed-dialing from Phonebook
To speed-dial the numbers assigned to keys
press and hold the appropriate key.
to
Checking the Memory Status
You can check how many names and numbers are
stored in Phonebook; SIM card and phone memories.
You can also see the capacity of both memories.
8. When the idle screen displays, press the Name soft key.
9. Select the Memory Status option.
10. Press the Up or Down key to view the number of existing
and remaining entries in the card and phone’s memory.
11. When you are finished, press the
or
key.
Deleting All of the Phone Book Entries
You can delete all of your entries from your phone’s
memory, your SIM card or both.
1. When the idle screen displays, press the Name soft key.
2. Scroll to Delete All by pressing the Up or Down key and
press the Select soft key or
key.
Phonebook
40
,
3. To place a check mark by the memory location you want to
empty, All, SIM Memory, or Phone Memory, press the
key.
You can remove the check mark by pressing the
again.
key
4. Press the Delete soft key to delete the entries in the selected
memory location.
5. Enter the phone password and press the OK soft key or
key.
Note: The password is preset to “00000000” at the factory.
To change this password, see “Change Password” on
page 153.
6. When the confirmation message appears, press the Yes soft
key or
key.
To cancel the deletion, press the No soft key.
7. When you have finished, press the C or (end) key.
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN)
assigned by your service provider. These numbers include
emergency numbers, directory enquiries and voice mail
numbers.
1. When the idle screen displays, press the Name soft key.
2. Select the SDN option by pressing the Up or Down key and
press the Select soft key or(C) key.
3. To dial the number displayed, press the Dial soft key,
(SEND)key, or (C)key.
Phonebook
41
Phonebook
42
Entering Text
When using your phone, you often need to enter text, such
as when storing a name in Phonebook, creating your
personal greeting or scheduling events on your calendar.
You can enter alphanumeric characters by using your
phone’s keypad.
Your phone has the following text input modes:
♦T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, when you press the
key
once, J, K or L displays. The T9 mode automatically
compares your keystrokes with an internal linguistic
dictionary to determine the correct word, thus requiring far
fewer keystrokes than the traditional upper/lower-case
character modes.
♦Upper/lower-case character modes
These modes allow you to enter letters by pressing the
key labeled with the letter you want to enter once, twice,
three or four times until the letter displays.
♦Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
♦Number mode
This mode allows you to enter numbers.
Entering Text
43
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Example: Writing a text message
To select
Press the
soft key until
T9 mode
displays. See
page 45.
Upper-case
character mode
displays. See
page 46.
Lower-case
character mode
Number mode
Entering Text
44
displays. See page 46.
displays. See
page 47.
Using T9 Mode
T9 is a predictive text input mode that allows you to key in
any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by pressing
the
to
keys. Press each key only once for each
letter.
Example:To enter “Hello” in T9 mode, press the
,
and
keys.
,
,
The word you are typing appears on the display. It may
change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the
, Up or Down key to display alternative
word choices for the keys that you have pressed.
Example:Both “Of” and “Me” have the
and
keys.
The phone displays the most commonly used choice first.
4. Put a space by pressing the
next word.
key and start entering the
♦To type words not found in T9 mode, change the text
input mode to the upper/lower-case character input
mode.
♦To enter full stops, hyphens or apostrophes, press the
key. T9 mode applies grammar rules to ensure
that the correct punctuation is used.
Entering Text
45
Example: The
marks:
L
e
key is used twice to display two punctuation
t
’
s
e
a
t
.
♦To shift the case in T9 mode, use the
key. There are
two cases: Lower Case ( ) and Capital Lock ( ).
♦You can move the cursor by using the Left and Right
keys. To delete letters, press the
key. Press and
hold the
key to clear the display.
To Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you want to
add, press the 0 key or Up or Down key to display the
alternative words.
2. When you press the 0 key or Up or Down key at the last
alternative word, the display shows Add on the bottom line.
Press the Add soft key or the
key .
3. If necessary, clear the word using the C key and enter the
word you want to add using Alphabet mode.
4. Press the OK soft key or the
key.
The word is added to the T9 dictionary and becomes the first
word for the associated keypress series.
Using the Upper/Lower-Case Alphabet Mode
Use the
to
keys to enter your text.
1. Press the key labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
Entering Text
46
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just wait for
a few seconds for the cursor to move to the right automatically, and then select
the next letter.
See the table below for more information about the
characters available:
♦To insert a space, press the
key.
♦You can move the cursor by using the Left and Right
keys. To delete letters, press the
key. Press and
hold the
key to clear the display.
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Entering Text
47
Using Symbol Mode
Symbol mode enables you to insert symbols into a
text message.
To
Press the
select a symbol
corresponding number key.
display more
symbols
Up or Down key.
clear the symbol(s)
C key. When the input field is
empty, this key returns the
screen to the previous mode.
insert the symbol(s)
into your message
OK soft key or the
cancel your input and
return to the previous
mode
Entering Text
48
soft key.
key.
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want.
You can make another call while you have a call in
progress if your network supports this service.
To place a call on hold, simply press the Hold soft key. You
can reactivate the call whenever you want, by pressing the
Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up in
Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or
1. Put the current call on hold by pressing the Hold soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the Swap
soft key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the
other party.
When you want to finish, end each call normally by
pressing the
key.
Options During a Call
49
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off,
so that the other party cannot hear you.
Example: You wish to say something to another person in
the room but do not want the person on the phone to hear
you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Mute option.
3. Press the OK soft key. The other person can no longer hear
you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Unmute
option.
3. Press the OK soft key. The other person can hear you again.
Muting/Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmit the key tones. It allows you to press keys without
hearing annoying key tones during a call.
Note: To communicate with answering machines or computerized telephone systems,
the Mute keys option must be selected.
Sending Tones
This option allows you to send the correct type of tones if
you need to enter a password or account number when
Options During a Call
50
calling an automated system, such as a bank. To send
tones:
1. Press the Options soft key.
2. Highlight the Send DTMF option.
3. Press the OK soft key.
4. Enter the required number and press the OK soft key.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook option.
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the Phonebook
entries are listed, starting with the first entry matching your
input.
5. To view the highlighted entry, press the View soft key.
For further details about the Phonebook feature, see
“Phonebook” on page 33.
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call Waiting menu (Menu 3.3) to
Activate; see “Call Waiting” on page 104. You are notified
of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
Options During a Call
51
1. Press the
key to answer the incoming call. The first call is
automatically put on hold.
2. To switch between the two calls, press the Swap soft key.
3. To end a call on hold, press the Options soft key and select
the End Held Call option.
To end the current call, press the
key.
Making a Multi-party Call
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call is
automatically put on hold.
3. To join the first participant to the multi-party call, press the
Options soft key and select Join. Press the OK soft key.
4. To add a new person to the multi-party call, call the person in
the normal way and then press the Options soft key. Select
the Conference option and press the OK soft key.
You can add incoming callers by answering the call and
pressing the Options soft key, and selecting Conference.
Repeat as required.
Having a Private Conversation With One Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key.
Options During a Call
52
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and press
the Select soft key or the
key.
3. When the Private option highlights, press the OK soft key.
Now you can talk privately to that person. The other
participants can continue to converse with each other.
4. To return to the multi-party call, press the Options soft key
and select Conference. Press the OK soft key.
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and press
the Select soft key or the
key.
3. Press the Down key to select the Remove option and press
the OK soft key.
The call ends with that participant, but you can continue to
talk to the other participants.
4. When you want to end the multi-party call, close the folder or
press the
key.
Options During a Call
53
Options During a Call
54
Using the Menus
You can tailor the phone’s range of functions to your needs
using menus and sub-menus. Menus and sub-menus can
be accessed by scrolling using the Navigation keys or by
using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key.
2. Scroll using the navigation keys to reach a main menu,
Phone Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Language for example, you
can access them by scrolling and pressing the Select soft key
or the
key.
If the menu that you have selected contains further options,
repeat this step.
To
Press the
scroll through the
menus
Up or Down keys or use
the and
keys.
confirm the
chosen setting
Select soft key or the
key.
return to the
previous menu
level
soft key or the
exit the menu
without changing
the settings
key.
key.
Using the Menus
55
Accessing a Menu Function by Using Its Shortcut
The menu items, such as menu, sub-menus and options,
are numbered and can be accessed quickly by using their
shortcut numbers. For the main menus, you can access
any one of them by pressing the number keys (1 to 9)
corresponding to their location on the screen.
Note: The numbers assigned to each menu are indicated on the list on the next
page. For menu number 10, use 0.
Example: Accessing the Language menu.
4. Press the Menu soft key.
5. Press the
key for Phone Settings.
6. Press the
key for Language.
The languages available display.
List of Menu Functions
The following list shows the menu structure available and
indicates the number assigned to each option and the
page where you can find a description of each feature.
Note: If you use a SIM AT card that provides additional services, the SIM AT
menu displays when you press the Menu soft key to enter Menu mode. For
further details, see your SIM card instructions.
1. Recent Calls
1.1
1.2
1.3
1.4
Missed Calls
Calls Received
Calls Made
Voice Mail
1.4.1 Connect to Voice Mail
1.4.2 Voice Mail Number
1.5 Delete All
1.6 Call Time
Using the Menus
56
1.6.1
1.6.2
1.6.3
1.6.4
Last Call
Total Made
Total Received
Reset Timers
2. Messaging
2.1 Text Messages
2.1.1 Inbox
2.1.2 Outbox
2.1.3 Write New
2.1.4 Templates
2.1.5 Settings
2.1.6 Delete All
2.1.7 Memory Status
2.1.8 Broadcast
2.2 Multimedia Messages
2.2.1 Inbox
2.2.2 Outbox
2.2.3 Shop Multimedia
2.2.4 Draft
2.2.5 Write New
2.2.6 Templates
2.2.7 Delete All
2.2.8 Memory Status
2.2.9 Setup
2.2.0 MMS Profile
2.3 Instant Message
2.4 E-mail Messages
2.4.1 Inbox
2.4.2 Outbox
2.4.3 Draft
2.4.4 Write New
2.4.5 Templates
2.4.6 Delete All
2.4.7 Memory Status
2.4.8 Setup
2.4.9 E-mail Profile
2.5 Push Messages
Using the Menus
57
2.5.1 Inbox
2.5.2 Receive
2.5.3 Delete All
3. Network Serives
3.1 Call Forwarding
3.1.1Forward Always
3.1.2 Busy
3.1.3 No Reply
3.1.4 Unreachable
3.1.5 Cancel All
3.2 Call Barring*
3.3 Call Waiting
3.3.1 Voice Calls
3.3.2Data Calls
3.3.3 Cancel All
3.4 Network Selection
3.4.1 Automatic
3.4.2 Manual
3.5 Caller ID
3.5.1 Default
3.5.2 Hide Number
3.5.3 Send Number
3.6 Closed User Group*
4. Camera
4.1
4.2
4.3
4.4
Take Photos
My Photos
Delete All
Memory Status
5. MEdia Mall
5.1
5.2
5.3
5.4
5.5
Shop
Shop
Shop
Shop
Shop
Using the Menus
58
Ringtones
Games
Graphics
Multimedia
Applications
5.6 MEdia Home
6. Sound Settings
6.1
6.2
6.3
6.4
Ring Tone
Ring Volume
Shop Ringtones
Alert Type
6.4.1 Light Only
6.4.2 Melody
6.4.3 Vibration
6.4.4 Vibra+Melody
6.5 Keypad Tone
6.5.1 Off
6.5.2 Cool
6.5.3 Piano
6.5.4 Tone
6.5.5 Beep
6.6 Message Tone
6.6.1 SMS Tone
6.6.2 SMS CB-Tone
6.6.3 MMS Tone
6.6.4 E-mail Tone
6.7 Folder Tone
6.7.1 Off
6.7.2 Future
6.7.3 Crystal
6.8 Power On/Off
6.8.1 OFF
6.8.2 Classical
6.8.3 Cheerful
6.9 Alerts On Call
6.9.1 Off
6.9.2 On
6.10 Extra Tones
7. Applications
7.1 Alarm
7.1.1. Once Alarm
7.1.2 Daily Alarm
Using the Menus
59
7.2
7.3
7.4
7.5
7.6
7.7
7.1.3 Wake-up Call
7.1.4 Remove Alarm
7.1.5 Autopower
Calendar
Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.4.5 Auto Update
Calculator
To Do List
Voice Memo
7.6.1 Record
7.6.2 Memo List
7.6.3 Delete All
7.6.4 Memory Status
Currency Exchange
8. My MEdia
8.1 MEdia Net
8.1.1 Home
8.1.2 Favorites
8.1.3 http://
8.1.4 Settings
8.1.5 Clear Cache
8.2 Games
8.3 Audio
8.4 Graphics
8.5 Delete All
8.6 Memory Status
9. Phone Settings
9.1 Display Settings
9.1.1 Wallpaper
9.1.2 Front LCD
9.1.3 Menu Style
9.1.4 Shop Graphics
Using the Menus
60
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
9.1.5 Back Light
9.1.6 Service Light
9.1.7 Graphic Logo
Greeting Message
Own Number
9.3.1 Num
9.3.2 Number 2
9.3.3 Number 3
9.3.4 Data
9.3.5 Number 5
Language
Security
9.5.1 PIN Check
9.5.2 Change PIN
9.5.3 Phone Lock
9.5.4 Change Password
9.5.5 Privacy
9.5.6 SIM Lock
9.5.7 FDN Mode*
9.5.8 Change PIN2*
Extra Settings
Short Cut
9.7.1 Key Down
9.7.2 Key Right
9.7.3 Key Left
TTY Setting
9.8.1 Enable
9.8.2 Disable
Reset Settings
10.
Using the Menus
61
Using the Menus
62
Recent Calls
In this menu, you can view and edit the:
♦calls you missed, received or made.
♦voice mail
♦length of your calls.
♦cost of your calls.
Note: You can access the numbers in the three types of call records by
pressing the
key in Idle mode.
Missed Calls
This menu lets you view the numbers of the last 20
unanswered calls.
The number and name, if available, display together with
the date and time when the call was received.
By pressing the Options soft key, you can:
♦edit the number, if available, and save it in Phonebook.
♦delete the call from the list.
You can also dial the number by pressing the
key.
Calls Received
This menu lets you view the last 20 numbers of the calls
you answered.
The number and name, if available, display, together with
the date and time when the call was received.
By pressing the Options soft key, you can:
♦edit the number, if available, and save it in Phonebook.
♦delete the call from the list.
You can also dial the number by pressing the
key.
Recent Calls
63
Calls Made
This menu lets you view the last 20 numbers you dialed.
The number and name display, together with the date and
time when the call was made.
key, you can:
By pressing the Options soft key or the
♦delete the number.
♦edit the number and save it in Phonebook.
You can also dial the number by pressing the
key.
Voice Mail
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
The following options are available:
Connect to Voice Mail: before using the Voice Mail feature,
you must enter the voice server number obtained from
your service provider. You can then select this option and
key to listen to your
press the OK soft key or the
messages.
You can connect to the voice server by pressing and
holding the
key in Idle mode.
Voice Mail Number : allows you to change the voice mail
server number, if necessary.
Note: Voice Mail is a network feature. Please contact your service
provider for further details.
Delete All
You can delete all of the numbers stored in each call
record category.
Select a call record using the Up or Down key and press
the Delete soft key. When a confirming message appears,
press the Yes soft key.
Recent Calls
64
Call Time
This menu lets you view the timers for calls you made and
received.
Note: The actual time invoiced for calls by your service provider may vary,
depending on network features, such as rounding-off for billing purposes.
The following options are available:
Last Call: length of the last call.
Total Made: total length of all calls you made since the
timer was last reset.
Total Received: total length of all calls you received since
the timer was last reset.
Reset Timers: option used to reset the call timers. You
must first enter the phone password and then press the
OK soft key.
Note: The password is preset to “00000000.” To change this password, see
“Change Password” on page 153.
Recent Calls
65
Recent Calls
66
Messaging
In this menu, the following menu options are explained:
♦Text Messages
♦Multimedia Messages
♦Instant Messages (IM)
♦E-mail Messages
♦Push Messages
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other GSM
mobile phones. In addition, your phone supports the
Enhanced Messaging Service (EMS), which enables you
to include simple pictures, melodies, and animated images
in your messages. To use this feature, you must subscribe
to your service provider’s message service.
1. When the Message icon (
) appears, you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
Inbox
This message box is used to store the messages that you
have received.
When you enter this menu, the list of messages displays
with the senders’ phone numbers or names, if available in
your Phonebook.
1. Select a message from the list and press the View soft key or
the
key to read the message contents.
Messaging
67
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous message press the
the
key for the next message.
key or press
While reading a message, you can choose the following
key:
options by pressing the Options soft key or the
Delete: allows you to delete the message.
Forward: allows you to resend the message. For further
information about how to send a message, see page 70.
Reply: allows you to reply to the sender by sending a text
message.
Call Back: allows you to call the sender back.
Save Address: allows you to extract the sender’s number
and URL, e-mail addresses or phone numbers from the
message text, so that you can save them in your phone’s
memory.
Move to Phone: allows you to move the message to from
the SIM card to the phone’s memory. This option is only
available for messages stored in the SIM card.
Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only
available for messages stored in the phone’s memory.
Select Objects: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a
message. For details, see page 71.
Outbox
This message box is used to store the messages that you
have already sent or will send.
Messaging
68
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
1. Select a message from the list and press the View soft key or
the
key to read the message contents.
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous message press the
the
key for the next message.
key or press
While reading a message, you can choose the following
key:
options by pressing the Options soft key or the
Delete: allows you to delete the message.
Send: allows you to resend the message. For further
information about how to send a message, see page 70.
Save Address: allows you to extract the destination
number and URL, e-mail addresses or phone numbers
from the message text, so that you can save them in your
phone’s memory.
Move to Phone: allows you to move the message to
another memory location, from the SIM card to the
phone’s memory or vice versa.
Select Objects: allows you to save the media items, such
as sounds or images, from the message into your phone’s
memory. You can then use the items when writing a
message. For details, see page 71.
Write New
In this menu, you can write and send a text message.
Note: When you add media items to the message, the number of characters
you can enter decreases.
Messaging
69
Creating a Simple Text Message
1. Create your message.
For more information about entering characters, see “Entering
Text” on page 43.
2. When you finish entering your message, press the Options
soft key or the
key. The following options are available:
• Send Only: allows you to send the message. The
message is deleted after sending.
• Save and Send: allows you to save a copy of the
message to the Outbox and then send the message.
• Save Only: allows you to save the message in the Outbox
so that it can be sent later.
• For more information about the Text Formatting, Add
Objects, Add Templates, Add Phonebook, Add
Bookmark and Language options, see page 71.
3. Select Send Only or Save and Send, and press the Select
soft key or the
key.
If you only want to save the message, select Save Only.
After saving the message, the phone returns to the Text
Messages menu.
4. If you select a save option, select a location and press the OK
soft key or the
key.
5. If you select the Save and Send option, enter a destination
number and press the OK soft key or the
key. The
message is sent.
Note: When the phone fails to send the message, it asks you if you want to
retry.
Messaging
70
6. Press the OK soft key or the
key to confirm. Otherwise,
press the Exit soft key to return to the text message screen.
Creating a Message Using the Options
1. Create your message.
2. Press the Options soft key or the
key.
3. Select one of the following options by using the Up and Down
keys and pressing the Select soft key or the
key.
• Text Formatting: allows you to format the style of the
text.
• For the Size attribute, Normal, Large and Small sizes are
available. For the Underline and Strikethrough
attributes, select On or Off.
The attributes can be combined.
• Add Objects: allows you to add a sound, melody, picture
or animated image to your message. Select the category
of the item to be added. In each category, you can select
from the various factory-set items or choose an item
received from other sources, such as the Internet or other
phones.
Note: When you add media items to a message, the number of characters you
can enter decreases.
• Add Templates: allows you to apply one of the preset
message templates to the text. Select one of the five
messages stored in the Templates menu. For further
details, see page 72.
• Add Phonebook: allows you to add a Phonebook entry to
your message. Select one from the list.
• Add Bookmark: allows you to add a web page’s address
stored in your Favorite list. Select one from the list.
Messaging
71
• Language: allows you to change the language to be used
in T9 input mode. Select the language to be used.
4. Complete the message, and send or save it by following the
procedure from step 2 on page 70.
Templates
Using this menu, you can preset messages that you use
most frequently.
Select an empty location or the message template you
key.
want and press the Options soft key or the
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note: For further details about how to enter characters, see “Entering Text” on
page 43.
Send Message: allows you to retrieve the message. Once
you have completed the message, you can send, save and
send, or simply save it. For details about how to send a
message, see page 69.
Delete: allows you to delete the message. You are asked
to confirm the deletion by pressing the Yes soft key or the
key.
Settings
In this menu, you can set up default message information.
A setting group is a collection of settings required to send
messages. The number of setting groups available
depends on the capacity of your SIM card.
Messaging
72
Note: The last setting you accessed is automatically activated for sending
messages.
Service Center: allows you to store or change the number
of your message center, which is required when sending
messages. You must obtain this number from your service
provider.
Default Destination: allows you to store the default
destination number. The number automatically displays on
the Destination screen when you create a message.
Default Type: allows you to set the default message type
to Text, Fax, E-mail or Paging. The network can convert
the messages into the selected format.
Default Validity: allows you to set the length of time your
text messages are stored at the message center while
attempts are made to deliver them.
Setting Name: allows you to give a name to the setting
group currently being defined.
Setting x (where x is the setting group number): each
group has its own sub-menu.
Common Setting: The following options are available:
Reply Path: allows the recipient of your message to send
you a reply message using your message center, if your
network supports this service.
Delivery Reports: allows you to activate or deactivate the
report function. When this function is activated, the
network informs you whether or not your message has
been delivered.
Bearer Selection: allows you to choose either GSM or
GPRS, depending on your network.
Character Support: allows you to choose a character type
from GSM-Alphabet, Uni-Code or Automatic. If you
Messaging
73
select Uni-Code and your recipient’s phone does not
support it, your recipient may not be able to read your
message.
Delete All
This menu allows you to delete all of the text messages in
each message box. You can also delete all of your
messages at one time.
To
select a message
box to clear
place or remove a
check mark
delete the marked
messages
Press the
Up or Down key. To delete all of your
messages, select All Messages.
key.
Delete soft key.
When a confirming message displays, press the Yes soft
key to confirm.
key
Memory Status
You can check how many messages are currently s
This menu shows how many messages are currently
stored in the SIM Memory, PHONE Memory, and CB (Cell
Broadcast) Memory.
To delete messages in each message box, use the Delete
All option.
Messaging
74
Broadcast
This network service allows you to receive text messages
on various topics, such as the weather or traffic. Cell
Broadcasting (CB) messages display as soon as they are
received, provided that:
♦the phone is in Idle mode.
♦the Receive option is set to Enable.
♦the message channel is currently active on the channel
list.
The following options are available:
Read: lets you view the message. While reading a
message, press the Save soft key to store the message in
the Archive box for later retrieval. Volatile displays the
messages from the network, but loses its contents as
soon as the phone is switched off. Scroll through the
message using the Up and Down keys.
Receive: allows you to enable or disable the reception of
broadcast messages.
Channel List: allows you to indicate the channels from
which you wish to receive cell broadcast messages. The
following options are available:
Select: used to enable or disable channels on the list by
marking or unmarking them respectively.
Add Channel: used to enter the ID and title for a new
channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.
Language: allows you to select your preferred language
to be used when displaying cell broadcast messages.
Messaging
75
Please contact your service provider for more information.
Multimedia Messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service (SMS). It
provides automatic and immediate delivery of personal
multimedia messages from phone to phone or from phone
to e-mail. In addition to the familiar text content of text
messages, multimedia messages can contain images and
graphics. An MMS message is a multimedia presentation
in a single entry. It is not a text file with attachments. Using
the MMS feature, your phone can receive multimedia
messages. You can also send picture messages, which
are short messages that contain images, such as your
photos or graphics you downloaded from the Internet. This
function is available only if it is supported by your service
provider. Only phones that offer picture message features
can receive and display picture messages.
Inbox
Viewing a Message When You Receive it
When a new multimedia message comes in, the display
shows the text notification along with the sender’s number.
1. Press the View soft key to view the message.
The display shows brief information about the message,
such as the sender’s number, the message size and the
subject. If you want to view the message later in the Inbox,
press the Exit soft key.
2. To scroll through the message information, press the Up or
Down key.
Messaging
76
While viewing the information, press the Options soft key
to use the following options:
If you are viewing a new message, the options are the
same as when you view a message as soon as you
receive it.
When you are reviewing message, the following options
are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending a text
or picture message.
Call Back: all you to reply to the sender by sending a text
or picture message.
Save Address: allows you to extract a number from the
message text, so that you can call the number or save it in
the Phonebook.
Forward: allows you to forward the message to another
person.
Save Picture: allows you to save an image from the
message into your phone. Photos are stored in the My
Photos folder and other images are in the Pictures folder
in the Downloads menu.
Save Sound: allows you to save a sound from the
message into the Sounds folder in the Downloads menu.
Viewing a Received Message in the Inbox
When you access the Inbox menu option, the list of
multimedia messages you received displays with the
senders’ phone numbers, if they are available in your
Phonebook, or subjects.
1. Select a message and press the Select soft key to view the
message.
Messaging
77
2. To scroll through the message, press the Up or Down key.
While viewing a message, you can choose the Message
options by pressing the Options soft key.
If you are viewing a new message, the options are the
same as when you view a message as soon as you
receive it. See the previous section.
When you are reviewing a message, the following options
are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending a text
or picture message.
Callback: allows you to call the sender back.
Save Address: allows you to extract the origination
number from the message, so that you can call the
number or save it in your Phonebook.
Forward: allows you to forward the message to another
person.
Outbox
When you access this menu option, the list of the picture
messages you sent or saved displays.
1. Select a message and press the Select soft key to view the
message contents.
2. To scroll through the message, press the Up or Down key.
While viewing a message, you can choose the following
options by pressing the Options soft key:
Delete: deletes the message.
Messaging
78
Save Address: allows you to extract the destination
number from the message, so that you can call the
number save it in your Phonebook.
Send: allows you to resend the message.
Edit Message: allows you to change the message
contents, sound, picture or text.
Information: displays status, subject, from, message size,
to, and date the message was created and sent.
Shop Multimedia
This option allows you to access the Cingular website to
purchase additional multi-media messages (MMS).
Draft
This menu option allows you to create a message and
save it as a draft to send at a later time.
For further details about viewing a message, see “Outbox”
on page 68.
Write New
This menu option allows you to create a new picture
message and then send it to multiple destinations.
Templates
Using this menu, you can preset messages that you use
most frequently.
Select an empty location or the message template you
want and press the Options soft key.
The following options are available:
Messaging
79
Edit: allows you to write a new message or edit the
message.
Delete: allows you to delete any templates that you have
created or saved.
Note: For further details about how to enter characters, see “Entering Text” on
page 43.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the OK soft key
key.
or the
2. When Add Here highlights, press the Options soft key or the
key and add the message contents using one of the
following options:
Add Text: Enter the message text and press the OK soft key
or the
key.
Add My Photo: allows you to select and add a photo that
you have previously taken.
Add Picture: allows you to add a picture stored in the
Pictures folder in the Downloads menu. Choose a picture
and press the Select soft key.
Add Sound: allows you to record a new sound or choose
from the sound list you have created from the Downloads
menu. Choose a sound and press the Select soft key
Send: allows you to send the message. Use this option when
you finish creating the message. This option is activated
after you add a content to the message.
Save: allows you to save the message in the Outbox so that
it can be sent later.
Messaging
80
Settings: allows you to view delivery report, read reply,
expiry date, delivery time and priority information about
the message.
Add Destination: allows you to enter the phone number,
e-mail address, or phone book information to send the
message.
Preview: allows you to preview the message before you
press send.
3. When the added content displays, press the Down key to
highlight Add Here.
4. Repeat steps 2 and 3 until you finish creating your message.
5. If you want to change the added items, press the Up or Down
key to highlight one and press the Options soft key. The
following options are available:
Edit: allows you to change text or replace the image with
another one.
Delete: deletes the item from your message.
Send: allows you to send the message.
Save: allows you to save the message in the Outbox so
that it can be sent later.
Add destination: allows you to add the destination for the
message.
Preview: allows you to preview the message before you
press send.
6. When you finish creating the message, select Send from the
options.
7. Choose one of the following options and press the Select soft
key:
Messaging
81
Phone Number: allows you to enter the phone number
you want.
E-mail Address: allows you to enter the e-mail address of
the recipient to send the message as an e-mail.
• Phone Book: allows you to recall a number from your
Phonebook.
8. Enter a number or an e-mail address, or select a number in
Phonebook. When the correct number or address is
displayed, press the OK soft key.
9. If you want to send the message to multiple destinations,
select Add Destination and press the Select soft key.
10. Repeat steps 7 to 10. You can enter up to 11 destinations.
11. After entering the destinations, press the Select soft key
when Send Message highlights.
12. If you want to edit the destinations, select one and press the
Select soft key. You can change or delete it.
13. When you are finished entering the destinations, select Send
Message and press the Select soft key. Your phone sends
the message.
Templates
This menu option stores messages you saved as
templates so that you can use them to make templates.
1. Scroll through the template list using the Up and Down keys.
2. When the message template you want highlights, press the
Select soft key or the
key.
Messaging
82
3. Press the OK soft key or the
key to access the following
options, or the display automatically shows the options after a
specified time:
♦Edit: allows you to send a message using the template.
For more details about how to send a message, see
“Write New” on page 69.
♦Delete: allows you to delete the message template. You
are asked to confirm the deleteion by pressing the Yes
soft key or the
key.
4. Press the
key to return to Idle mode.
Delete All
This menu allows you to delete all of the multimedia
messages in each message box. You can also delete all of
your messages at one time.
To
Press the
select a message
box to clear
Up or Down key. To delete all of
your messages, select All
Messages.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the Yes soft
key to confirm.
Messaging
83
Memory Status
You can check the amount of memory being used and the
memory remaining for multimedia messages.
The display shows the total space, including the free and
used space. It also shows how much space is currently
occupied by each message box when you press the Next
soft key.
Setup
You can change the default message settings.
Turn a give option on or off, press the Select soft key to
place or remove a check mark on each option
The following options are available:
Delivery Report: When this option is checked, the
network informs you whether or not your message has
been delivered.
Read Reply: When this option is checked, your phone
sends a request for a reply along with your message to the
recipient.
Auto Download: When this option is checked, your phone
automatically downloads the received pictures or sounds.
Message Acceptance: allows you to choose from the
message acceptance options. They are all, personal
informations, advertisement, and anonymous.
Hide ID: When this option is checked, your phone number
is not displayed on the recipient’s phone.
Expiry Date: When this option is selected, you can select
the expiry time limit you would like the message to display.
Messaging
84
MMS Profile
In this menu, you can configure various settings that are
required when you send or receive multimedia messages.
The following options are available:
Profile Name: Name that you wish to assign to the MMS
server.
Connection URL: Address of your MMS server.
Security: Data transmission mode. Choose Secure to
protect your data against unauthorized access; otherwise,
choose Non-Secure.
IP address: Gateway address required to connect to the
MMS server.
User name: User ID required to connect to the MMS
server.
Password: Password required to connect to the MMS
server.
APN: Access point name used for the address of the MMS
server. For further details, contact your service provider.
Instant Messaging (IM)
The instant messaging option allows you to send and
receive instant messages using AOL® Instant
Messenger™ service or ICQ®.
AOL Instant Messenger Service (AIM®)
You must already have an AIM Screen name and
password to log in. If you don’t have an AIM screen name,
you can get one free at www.aim.com.
Follow these easy steps to log in:
1. Scroll right on the navigation key
Messaging
85
2. Use the navigation keys to highlight the AIM. Press the
Select soft key.
3. Enter your Screen name and Password. Press the
Sign on soft key.
4. If the sign-on was successful, you will see Welcome,
followed by a list of options.
Buddy List Group
The first time you sign on to AIM from your phone, a
special Buddy List group is created. When you sign back
on to AIM from your computer, this list appears as a new
group called Mobile Device. You can manage this list using
your PC or your phone.
Send an Instant Message
1. From the AIM main menu, scroll to and select Buddy
List.
2. Use the navigation keys to highlight a buddy and press
key.
the Select soft key or
The following information is listed:
Send IM: This option launches the IM screen for you to
begin entering text.
Buddy info: This option provides information about the
buddy you have selected. It displays their status, screen
name, and client type.
Set Alert: This option sets an alert for the buddy when
they have activity on their session. To release the alert,
highlight release alert and press the Select soft key.
Messaging
86
Block IMs: This option blocks any messages from the
buddy you have selected.
Add Buddy: This option allows you to add another AIM
user to the conversation.
Delete buddy: This option deletes the selected buddy
from your buddy list.
Search: This option allows you to search for an AIM user
by their Screen name or E-mail address.
Menu
The Menu screen provides the following options:
Conversations
This function displays the conversations that you have
active. To select and view a conversation, press the Select
soft key or
key.
Blocked List
The blocked list shows all buddies that you have blocked
from sending you instant messages. The
icon displays
next to the screen name.
IM Settings
The instant message (IM) settings screen gives you the
option to save your password so that you do not have to
enter it each time you log on. Use the up and down
navigation keys to highlight the option. Press the Select
soft key or
key to save.
Saved history
This option provides the ability to save the conversations
you’ve had on your phone.
Messaging
87
Exit
This option exits you from the AIM Screen but does not log
you off the system.
Sign Off
This option will sign you off and end all conversations. To
sign off, press the OK soft key or
key. To cancel, press
the Cancel soft key.
The following table lists the icons associated with the
Buddy List.
Status Icons
The Buddy List displays an icon to the left of each user to
show their status. The following table describes what
these icons represent.
Icon
Description
You have new/unread messages from
this user.
Messages from this user are being
declined.
This user is online but has turned on
their Away Message.
You will be alerted when this user signs
on.
Messaging
88
This user is online.
This user is not online.
ICQ®
You must already have an ICQ Screen name and
password to log in. If you don’t, you can get one free from
www.icq.com. Follow these easy steps to log in:
1. Scroll right on the navigation key to highlight the ICQ
key.
icon. Press the Select soft key or
2. Enter your ICQ number and Password. Press the
Connect soft key. The Contact List screen displays
with the My Status option highlighted.
1. Press the Select soft key. The following options are
displayed.
My Availability: This option allows you to set your
availability to Available, Away, or Invisible. Use the Up or
Down navigation keys to highlight an option and press the
Select soft key.
Add user: This option allows you to enter another user’s
ICQ #.
Search: This option allows you to search for another user
by entering their ICQ # or their E-mail address.
Send message to: This option allows you to enter an ICQ
# and begin a conversation.
Messaging
89
Blocked List: This option displays the list of members
blocked from sending you instant messages.
Menu
The Menu screen provides the following options:
Conversations
This function displays the conversations that you have
active. To select and view a conversation, press the Select
soft key or
key.
Blocked List
The blocked list shows all buddies that you have blocked
from instant messages.
Saved history
This option provides the ability to save the conversations
you’ve had on your phone.
Exit
This option exits you from the ICQ Screen but does not log
you off the system.
Disconnect
This option will sign you off and end all conversations. To
sign off, press the OK soft key or
key. To cancel, press
the Cancel soft key.
E-Mail Messages
You can send or receive e-mails directly using your phone.
Using the E-mail feature, you can receive or send sounds
and pictures, as well as Phone Book entries or calendar
memos.
Messaging
90
To use this feature, you need to subscribe to an e-mail
service and set up your e-mail account. For further details,
contact your service provider.
Inbox
This menu allows you to access your e-mail Inbox and
read the e-mails you received.
1. Press the Select soft key when Check E-Mail highlights.
2. Select the e-mail account from which you want to retrieve emails and press the Select soft key.
For further details about setting up an e-mail account, see
page 97.
The list of e-mails you received displays. The icons on the
left tell you the status of each e-mail:
•
: The header hasn’t been read.
•
: The header has been read.
•
: The contents have been read.
•
: The e-mail has attachments and the contents have
been read.
•
: The e-mail has been deleted from both the phone and
e-mail server. This icon disappears when you disconnect
the phone from the server.
3. Scroll to an e-mail from the list and press the Select soft key.
When the e-mail is not read, the display shows you its
header, such as sender’s name, e-mail address, Cc
address(es), date when the e-mail was sent and subject.
If the e-mail has already been read, the display immediately
shows you its text. Skip to step 6.
Messaging
91
4. Press the Options soft key.
The following options are available:
• Retrieve: retrieves the e-mail text from the e-mail server.
• Delete: deletes the e-mail. You can select to either delete it
from your phone or from both the phone and e-mail
server.
• Disconnect: disconnects your phone from the e-mail server.
5. Select Retrieve and press the Select soft key.
The phone displays the e-mail text.
6. To scroll through the text, press the Up or Down key.
You can read the next or previous pages using the Right and
Left keys.
After opening an e-mail, you can use the following options
by pressing the Options soft key:
Delete: deletes the e-mail. You can select to either delete
it from your phone or from both the phone and e-mail
server.
Reply: allows you to send a reply to the sender.
Forward: allows you to forward the e-mail to another
person.
Save Address: allows you to extract the sender’s address
and the Cc addresses, so that you can save them in your
Phone Book.
Attachments: allows you to view the attachments, such
as Phone Book entries, calendar memos, sounds or
pictures. You can save them into your phone’s memory.
Disconnect: disconnects your phone from the e-mail
server.
Messaging
92
Properties: shows the e-mail header, such as the sender’s
name and e-mail address, Cc address(es), subject and email text.
Outbox
When you select this menu, the list of the e-mails you sent
or failed to send displays along with the e-mail status and
subject. The icons on the left tell you the e-mails’ status:
•
: E-mail your phone couldn’t send
•
: E-mail with attachments your phone couldn’t send
•
: E-mail your phone successfully sent
•
: E-mail with attachments your phone successfully sent
•
: E-mail your phone is currently sending
•
: E-mail with attachments your phone is currently
sending
•
: E-mail your phone will send
•
: E-mail with attachments your phone will send
1. Select an e-mail from the list and press the Select soft key to
read it.
The display shows you the recipients’ addresses, time and
date when the e-mail was sent, and e-mail text.
2. To scroll through the contents, press the Up or Down key.
After opening an e-mail, you can use the following options
by pressing the Options soft key:
Delete: deletes the e-mail.
Save Address: allows you to extract the destination
addresses, so that you can save them in your Phone
Book.
Messaging
93
Send: allows you to resend the e-mail.
Save: allows you to save the e-mail in the Draft or
Templates box for later use.
Edit E-Mail: allows you to change the e-mail subject or
contents.
Add Attachments: enables you to attach another item to
the e-mail.
Draft
In this menu, you can retrieve the e-mails you saved.
When you select this menu, the list of the e-mails you
saved displays. The icons on the left tell you the e-mails’
status displays:
♦
♦
: Saved e-mail
: Saved e-mail with attachments
For further details about selecting an e-mail and using the
e-mail options, see page 93.
Write New
This option provides a bland screen for you to begin
creating an e-mail. Select Write New and use the
following instructions:
1. Enter the subject of your e-mail and press the OK soft key or
key.
For further details about entering characters, see page 47.
2. Enter the e-mail text and press the Options soft key or
key.
3. Press the Up or Down key to select an option and press the
Select soft key or
key.
Messaging
94
The following options are available:
• Add Attachments: enables you to attach one of your
Phone Book entries, memos stored on your calendar,
photos you took, pictures or sounds. After selecting the
file type you want to add, choose an item from the list.
After adding, press the
soft key or the C key to go back
to the Write Option screen.
• Send: sends your e-mail.
• Save: saves the e-mail in the Draft or Templates box for
later use.
• Add Destination: allows you to add destination
addresses. See steps 5 to 9. After adding, press the
soft key or C key to go back to the Write Option screen.
• Information: shows the e-mail subject, the list of the
recipients you added, if any, and e-mail text.
4. When you are finished creating the e-mail, choose Send from
the options and press the Select soft key or
key.
5. Select a destination type, To, Cc or Bcc and press the Select
soft key or
key.
6. Choose one of the following options and press the Select soft
key:
• Direct Enter: allows you to directly enter the e-mail address
you want.
• Phone Book: allows you to retrieve an e-mail address from
your Phone Book.
7. Enter an e-mail address and press the OK soft key, or select
one from the Phone Book or Recent Log list and press the
Select soft key or
key.
8. To add another address, select To, Cc or Bcc and press the
Select soft key or
key.
Messaging
95
9. When there is an e-mail address already entered in the
selected destination type, press the Select soft key when Add
Destination highlights. Repeat from steps 6 to 8.
If you want to edit the destinations, select one and press the
Select soft key or
key. You can change or delete it.
10. When you are finished adding the destinations, press the
Select soft key or
key when Send E-Mail highlights.
Your phone sends the e-mail.
Templates
This menu stores the e-mails you saved as templates so
that you can use them to make new e-mails.
When you select this menu, the list of the e-mail templates
you saved displays. The icons on the left tell you the emails’ status:
•
: Saved e-mail
•
: Saved e-mail with attachments
Scroll to the template you want using the Up or Down keys
key soft key. The display shows
and press the Select or
the e-mail information.
key soft key to use the following
Press the Options or
options:
Edit E-Mail: allows you to change the e-mail subject or
contents.
Send: allows you to send the e-mail.
Save: makes a copy of the e-mail in the Draft or the
Templates box for later use.
Delete: deletes the selected e-mail.
Messaging
96
Add Attachments: enables you to attach another item to
the e-mail.
Delete All
This menu allows you to delete all of the e-mails in each
mail box. You can also delete all of your e-mails at one
time.
To
select a e-mail box
to clear
place or remove
check mark
Press the
Up or Down key. To delete all of
your e-mails, select All.
key.
delete the marked e- Delete soft key.
mails
When a confirming message displays, press the Yes soft
key to confirm.
Memory Status
You can check the amount of memory being used and the
memory remaining available for e-mails.
The display shows the total space, including the free and
used space. It also shows how much space is currently
occupied by each mail box.
Setup
You can change the default setting options for using the Email feature.
Messaging
97
The following options are available:
Account: you can configure up to five e-mail accounts using
different service providers. The last account you accessed
is automatically activated for sending or receiving e-mails.
For each account, the following options are available:
Account Name: enter a name for the current account.
Connect Name: select one of the profiles set in the Profile
menu.
Name: enter the name to be displayed in your outgoing emails as the sender name.
E-Mail Address: enter your e-mail address.
Protocol Type: specify an e-mail protocol type for the
incoming server, either POP3 or IMAP4. Contact your email service provider for more information.
For the IMAP4 protocol, you can set whether or not the
phone retrieves e-mails with attachments. You can also
select the number of e-mail headers you want to retrieve.
Incoming Server : enter the IP address or domain name of
the server to be used for receiving e-mails. Your e-mail
service provider can give you this information.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
Outgoing Server : enter the IP address or domain name of
the server to be used for sending e-mails. Your e-mail
service provider can give you this information.
Check Interval: allows you to select how often the phone
checks the server for incoming e-mails.
Signature: allows you to attach your name, phone number,
simple memo or tag line as a signature to your e-mail.
Messaging
98
Send Copy to Self: allows you to set whether or not your
phone sends a copy of an outgoing e-mail to the e-mail
address specified in your account.
E-Mail Profile
In this menu, you can configure various network settings
that are required when you send or receive e-mails.
Note: Your service provider can give you information about each parameter.
If you change the e-mail settings without first checking
with your service provider, the E-mail feature may not work
properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to assign to the
e-mail profile.
Connect Name: enter a descriptive name for the
connection.
User Name: enter the user ID required to access the
GPRS network.
Password: enter the password required to access the
GPRS network.
APN: enter the access point name used for the address of
the GPRS network gateway.
Push Message
This menu option allows you to receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received from the
web server.
Messaging
99
Receive: allows you to set whether or not your phone
receives web messages.
Delete All: allows you to delete all of the web messages.
Messaging
100
Network Services
These menu functions are network services. Please
contact your service provider to check their availability and
subscribe to them, if you wish.
Call Forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example:You may wish to forward your business calls to a
colleague while you are on holiday.
You can use the following options to forward voice calls
and/or data calls:
Forward Always: all calls are forwarded.
Busy: calls are forwarded when you are already on
another call.
No Reply: calls are forwarded when you do not answer
the phone.
Unreachable: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All: all call forwarding options are canceled.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or Down
key and then press the Select soft key.
2. Select the type of calls, voice or data, by pressing the Up or
Down key and then press the Select soft key.
Network Services
101
The current status displays. If the option has already been
set, the number to which the calls are forwarded displays.
To
Press the
activate call
forwarding
Activate soft key. Go to
change the call
number
Change soft key. Go to
deactivate call
forwarding
Remove soft key.
step 4.
step 4.
3. Enter the number to which the calls are to be forwarded and
press the OK soft key.
To enter an international code, press the O key until the +
sign displays.
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can deactivate all call forwarding settings by selecting
the Cancel All option.
Call Barring
The call barring network service allows you to restrict your
calls.
You can use the following options to restrict voice and/or
data calls:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad, calls can
be made only to numbers within the current country and to
your home country, which is the country where your home
network provider is located.
Network Services
102
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received when
you are using your phone outside of your home service
area.
Cancel All: all call barring settings are deactivated; calls
can be made and received normally.
To set your call barring options:
4. Select a call barring option by pressing the Up or Down key
and then press the Select soft key.
5. Select the type of calls, voice or data, by pressing the Up or
Down key and then press the Select soft key.
6. Press the Activate soft key to confirm your settings.
7. Enter your call barring password supplied by your service
provider.
The phone sends your settings to the network and the
network’s acknowledgement displays.
To deactivate specific call barring settings:
8. Select the call barring option to be deactivated.
9. Select the type of calls to which this option applies.
10. Press the Deactivate soft key.
11. Enter your call barring password supplied by your service
provider.
The phone sends your settings to the network and the
network’s acknowledgement displays
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and change the
call barring password obtained from your service provider
Network Services
103
using this option. You must enter the current password
before you can specify a new one.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Call Waiting
This network service informs you when someone is trying
to reach you during another call.
You can specify individual call waiting options for voice
calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which the call waiting
option is to be applied by pressing the Up or Down key and
then press the Select soft key.
The screen informs you whether call waiting is activated or
deactivated.
2. You can activate or deactivate the call waiting feature using
the Activate or Deactivate soft key respectively.
To return to the previous screen, press the Exit soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Network Selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there is a
valid roaming agreement between them.
To indicate to automatically or manually select the network
when roaming:
Network Services
104
1. When Network Selection displays, press the Select soft key.
2. Press the Up or Down key until the appropriate option
highlights, then press the OK soft key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, the phone scans for the available
networks. Go to Step 3.
3. Press the Up or Down key until the network you want
highlights and then press the OK soft key.
You are connected to that network.
Caller ID
You can prevent your phone number from being displayed
on the phone of the person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
Default: the default setting provided by the network is
used.
Hide Number: your number does not display on the other
person’s phone.
Send Number: your number is sent each time you make a
call.
Closed User Group (CUG)
This network service allows incoming and outgoing calls
to be restricted to a selected user group. You can create
up to ten user groups.
For details on how to create and use a closed user group,
contact your service provider.
Network Services
105
Example: A company lends SIM cards to its employees and
wants to restrict outgoing calls to members of the same
team.
Activating a Closed User Group
If you select the Closed User Group menu, you can enter
the CUG function. You can now access the following
options after pressing the Select soft key:
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears. Add a
new CUG index as advised by your service provider or
delete a selected group.
To
Press the
scroll through the
existing CUG
indexes
Up or Down key.
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls to
numbers other than those in the Closed User Group. This
feature depends on the nature of your CUG subscription.
Please check with your service provider.
Network Services
106
Default Group: you may set a default CUG with your
service provider. If you have done so, you can enable the
Default Group option on your phone. When making a call,
you are given the option of using your default CUG,
instead of selecting one from the list.
Deactivate: deactivates the CUG function. This option
appears only when the default group is enabled or a CUG
index is selected.
Network Services
107
Network Services
108
Camera
Using the camera module built in your phone, you can take
pictures of people or events while on the move.
Additionally, you can send photos to other people in a
picture message or as an e-mail attachment. The camera
produces JPEG pictures.
CAUTION:
● Do not take photos of people without their permission.
● Do not take photos in a place where cameras are not
allowed.
● Do not take Photos in a place where you may interfere
with another person’s privacy.
Take Photos
This menu allows you to take a picture to send the photo
as a picture message to other destinations.
Note: You can quickly access the Camera menu by pressing the Camera key
on the side of the phone, or the Up navigation key.
Taking a Photo with the Phone Open
1. Accessing the Take Photos menu turns the camera on. The
image to be captured appears on the display.
You can also press and hold the
key or Camera key on
the side of the phone in Idle mode to turn on the camera.
2. Adjust the image by aiming the camera at the subject.
3. Press the left soft key to use the camera options.
4. Press the Save soft key or
key.
Camera
109
To discard the photo, press the Cancel soft key.
To
Press the
adjust the brightness Left and Right keys.
of the image
Camera
110
zoom in or out
Up and Down keys.
flip vertically or
horizontally
Volume keys.
use the camera
options
right soft key.
change the camera
mode
1 key.
change the display
size
2 key.
change the image
quality
3 key.
change the shot
mode
4 key.
apply effects
5 key.
use a frame
7 key.
set a delay time
8 key.
Press the left soft key to
take the picture using
the delay function.
To
Press the
move to the My
9 key.
Photos or My Videos
menu
5. Press the Camera key on the right side of the phone or the left
soft key to take the photo.
6. Press the Save soft key.
To discard the photo and return to the capture mode,
press the Cancel soft key.
To
Press the
use the photo
options
Options soft key. For
further details, see
page 112.
return to Capture
mode
NewPhoto soft key or
C key.
return to Idle mode
key.
When you press the Options soft key after saving a photo,
the following options are available:
Send: allows you to send the photo using a multimedia
message.
Set as Wallpaper: allows you to set the image as your
wallpaper for the idle screen.
Set as Caller ID: allows you to set the photo as a caller ID
image for Phone Book entries.
Protection: allows you to protect the photo from being
deleted.
Camera
111
Delete: deletes the photo.
Rename: allows you to change the name of the photo.
Properties: shows the properties of the photo, such as
the time and date it was saved, file size, photo size,
protection status, file format and file name.
Using the Camera Options
In Capture mode, you can use various options by pressing
the right soft key.
To
scroll to an option
Press the
Up or Down key.
select the highlighted Select soft key or the
option
Right key.
return to Capture
mode
C key or
soft key.
The following options are available:
Effects: allows you to change the color tone or apply
special effects to the photo.
Frames: allows you to use a decorated frame. Select a
frame from the list using the Navigation keys.
Multi-Shot: allows you to take a series of action stills.
Select the capture speed, High Speed or Normal Speed,
and the number of photos the camera will take. When you
press the Camera key, the camera takes photos
successively.
After taking photos, press the SaveAll soft key to save all
of them or the Save soft key to save the selected one.
Camera
112
Rotation: rotates the photo. You can reverse the photo as
a mirror image or flip the photo vertically.
Self Timer: allows you to have a delay time before the
camera takes the photo. Select the length of time you
want. When you press the Camera key, the camera takes
the photo after a specified time.
Settings: allows you to change the options for taking a
photo.
Photo Size: allows you to select a photo size. Once you
change this setting, it is saved for the next shots.
Photo Quality: allows you to change the image quality. Once
you change this setting, it is saved for the next shots.
Taking a Photo with the Folder Closed
1. Close the folder.
2. To turn the camera on, press and hold the Camera key on the
right side of the phone.
The image to be captured appears on the external
display.
3. Adjust the image by aiming the camera at the subject.
4. Press the Camera key to take the photo.
The photo is automatically saved in the My Photos menu
(Menu 4.2).
Use the Up and Down keys to zoom in and out.
Use the Left and Right keys to adjust the brightness of
the picture.
The
key on the left side of the phone allows you to flip
the picture left and right. The
key allows you to flip the
picture horizontally and vertically.
Camera
113
To add additional options for the photo access the
Options menu by pressing the Left soft key.
The following options are available:
Effects: allows you to change the color tone or apply
special effects to the photo. When you select an option,
the display shows your setting. Press the Select soft key.
Frames: allows you to use a decorated frame. Select a
frame from the list. Press the View soft key to check the
selected frame and the Select soft key to use it.
Mode: allows you to take a photo in various modes. Once
you change the mode, the corresponding indicator
displays at the top right of the display.
Normal Shot:allows you to take a photo in the normal
mode.
Multi Shot: allows you to take a series of action stills.
Select the capture speed to High Speed or Normal
Speed and the number of photos for the camera to take.
When you press the Capture soft key, the camera takes
photos successively.
Night Shot: allows you to take a photo at the best quality
when it is dark.
After taking photos, press the Save All soft key to save all
of them, or the Select soft key to check the photo(s) you
want to save and press the Save soft key.
Rotation: rotates the photo. You can reverse the photo as
a mirror image or flip it vertically.
Self Timer: allows you to have a delay time before the
camera takes the photo. Select the length of time you
want. When you press the Capture soft key, the camera
takes the photo after the specified time.
Camera
114
Settings: the following options are detailed in this
option.
Photo Size: allows you to select a photo size. Once you
change this setting, it is saved as the default.
Photo Quality: allows you to change the image quality
from Economy, Normal, Fine, and Super Fine. Once you
change this setting, it is saved as the default.
5. Press the
key on the side of the phone, or the
Take the picture.
key to
6. Press the Save soft key to save the picture.
7. Press the Options soft key to choose from the following:
Send: allows you to enter a send option for the photo
image. Available options are: By MMS and By E-mail.
Set as Wallpaper: allows you to set the image as your
wallpaper for the idle screen.
Set as Caller ID: allows you to set the image as a caller ID
image for a Phonebook entry.
Protection: allows you to protect the photo from being
deleted.
Delete: allows you to delete the photo.
Rename: allows you to change the name of the photo.
Properties: displays the photo Date, Time, File Size,
Photo Size, Protection, File Format, and File Name.
Taking a Photo with the Folder Closed
1. Close the folder.
2. To turn the camera on, press and hold the Camera key on the
right side of the phone.
Camera
115
The image to be captured appears on the external
display.
3. Adjust the image by aiming the camera at the subject.
4. Press the Camera key to take the photo.
The photo is automatically saved in the My Photos menu
(Menu 4.2).
My Photos
This menu allows you to review your photos.
When you access this menu, the latest photo is displayed.
Press the Left or Right navigation key to scroll through
the photos.
Press the Options soft key to use the following options:
Send: allows you to enter a send option for the photo
image. Available options are: By MMS and By E-mail.
Set as Wallpaper: allows you to set the image as your
wallpaper for the idle screen.
Set as Caller ID: allows you to set the image as a caller ID
image for a Phonebook entry.
Protection: allows you to protect the photo from being
deleted.
Delete: allows you to delete the photo.
Rename: allows you to change the name of the photo.
Properties: displays the photo Date, Time, File Size,
Photo Size, Protection, File Format, and File Name.
Camera
116
Delete All
This menu allows you to delete each type of the photos
saved in your phone. You can also delete all of your
photos and videos at one time.
To
select a photo or
video type to clear
place or remove a
check mark
delete the marked
photos.
Press the
Up or Down key. To delete all of
your photos, select All.
soft key.
Delete soft key.
When a confirming message displays, press the Yes soft
key to confirm.
Memory Status
You can check the amount of the memory being used and
the memory remaining in the camera.
The display shows the total, free and used space for
photos.
Camera
117
Camera
118
MEdia Mall
The MEdia Mall menu provides the following options:
♦Shop Ringtones
♦Shop Games
♦Shop Graphics
♦Shop Multimedia
♦Shop Applications
♦MEdia Home
Shop Ringtones
Selecting this menu option launches the web browser to
the Download Center menu.
1. Use the Select soft key to choose the option.
2. Use the Up and Down navigation keys to move to your
desired option and press the Select soft key.
3. Continue to navigate through the menu options.
Note: Additional charges my incur when downloading ringtones. Contact your
service provider for further information.
Shop Games
Selecting this menu option launches the web browser to
the Cingular’s Arcade menu.
1. Use the Select soft key to choose the option.
2. Use the Up and Down navigation keys to move to your
desired option and press the Select soft key.
3. Continue to navigate through the menu options.
Note: Additional charges my incur when downloading games. Contact your
service provider for further information.
MEdia Mall
119
Shop Graphics
Selecting this menu option launches the web browser to
the Download Center menu.
1. Use the Select soft key to choose the option.
2. Use the Up and Down navigation keys to move to your
desired option and press the Select soft key.
3. Continue to navigate through the menu options.
Note: Additional charges my incur when downloading graphics. Contact your
service provider for further information.
Shop Multimedia
Selecting this menu option launches the Shop Multimedia
Store menu.
1. Use the Select soft key to choose the option.
2. Use the Up and Down navigation keys to move to your
desired option and press the Select soft key.
3. Continue to navigate through the menu options.
Note: Additional charges my incur when downloading graphics. Contact your
service provider for further information.
Shop Applications
Selecting this menu option launches the web browser to
the games menu.
1. Use the Up and Down navigation keys to move to your
selection and press the Options soft key. Press the Select
soft key to continue or Back to make another selection.
2. Use the Up and Down navigation keys to move to your
desired option and press the Select soft key.
MEdia Mall
120
3. Continue to navigate through the menu options.
MEdia Home
Selecting this menu option launches the Choose
Language menu.
1. Use the Options soft key to choose your option.
2. Use the Up and Down navigation keys to move to your
desired option and press the Options then Select or Back
soft key.
3. Continue to navigate through the menu options.
Favorite: allows you to set your favorite web pages for
quick and easy access.
Reload: reloads the current page.
Home: takes you back at any time to the home page of the
Wireless eb service provider.
Goto URL: allows you to manually enter the URL address
of a Webpage. Press the OK soft key to access the URL.
Show URL: displays the URL address of the Webpage
you are accessing. Also, you can set the current site as
the startup home page.
Clear Cache: deletes the information stored in the cache,
which stores the most recently accessed Web pages.
Security Info: select this item during the secure access,
and the Security Information is displayed.
Inbox: allows you to check the push messages saved in
the phone.
Show Images: allows you to see the listed image file in
the current page.
MEdia Mall
121
MEdia Mall
122
Sound Settings
You can use the Sound Settings feature to customize
various settings, such as the:
♦ring melody, volume and type.
♦sounds made when you press a key, receive a message,
open/close the folder or switch your phone on/off.
♦alert tone made every minute during a call, when you
make an error or when your call is connected to the
system.
Note: When the phone is in Silent mode, you cannot change the sound
settings.
Ring Tone
This menu allows you to select a ring melody.
You can choose between many different melodies. Each
time you select a melody, it plays for a few seconds. If you
have downloaded sounds from the Internet, you can use
them in this menu.
Ring Volume
This menu allows you to adjust the ring volume to one of
five levels.
Use the Up and Down keys or the Volume keys on the left
side of the phone to increase or decrease the volume.
Shop Ringtones
This option opens the WAP browser to a web site where
you can download additional ringtones.
Sound Settings
123
Alert Type
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes the phone neither
rings nor vibrates.
Melody: the phone rings using the ring melody selected in
the Ring Tone menu (Menu 6.1).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times and
then starts ringing.
Keypad Tone
This menu allows you to select the tone that the phone
sounds when you press a key. The options are OFF, Cool,
Piano, Tone and Beep.
To turn off the sound, select Off.
Message Tone
This menu allows you to select how the phone informs you
that a new message has been received.
SMS Tone
The following options are available for alerting you to
new SMS messages:
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tone X: the phone uses one of several SMS tones.
Off: the phone does not use an SMS tone.
Light Only: the service light flashes.
Sound Settings
124
SMS-CB Tone
This menu may not be available depending on your
SIM card.
The following options are available for alerting you to
new cell broadcast messages:
SMS-CB Tone X: the phone uses one of several CB
tones.
Off: the phone does not use a CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
MMS Tone
The following options are available for alerting you to
new multimedia messages:
MMS Tone X: the phone uses one of several MMS
tones.
Off: the phone does not use a MMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
E-mail Tone
The following options are available for alerting you to a
new e-mail arrival.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
E-mail Tone X: the phone uses one of several
available tones.
Sound Settings
125
Off: the phone does not use a MMS tone.
Light Only: the service light flashes.
Folder Tone
This menu allows you to select the tone that the phone
sounds when you open or close the folder.
To turn the sound off, select Off.
Power On/Off
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn the sound off, select Off.
Alerts on Call
This menu option allows you to turn off the following alerts
during a call:
● Alarm
● Text messages
● MMS
● SMS
● Low Battery
● WAP Push
The default setting is On. To turn off this setting, select
the OFF setting and press the Select soft key.
Sound Settings
126
Extra Tones
You can customize additional tones used for the phone.
To turn a given tone
on
Press the
ON soft key or the
key.
A check mark displays in
front of the option.
off
OFF soft key or the
key.
The check mark no longer
displays.
The following options are available:
Error Tone: sets whether or not the phone informs you
when you have make a mistake.
Minute Minder: sets whether or not the phone beeps
every minute during an outgoing call to keep you informed
of the length of your call.
Connect Tone: sets your phone to beep when your call is
connected to the system.
Sound Settings
127
Sound Settings
128
Applications
The Applications menu enables you to:
♦set the alarm so that the phone rings at a specific time.
♦view the calendar and organize your schedule.
♦set the current date and time.
♦use the phone as a calculator for basic mathematical
equations or currency exchange operations.
♦define a list of things to do.
♦create personal voice memo’s.
♦identify currency exchange rates
Alarm
This feature allows you to:
♦set the alarm to ring at a specific time.
♦set the phone to switch on automatically and ring the
alarm even if the phone is switched off.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same time.
Wake-up Call: the alarm rings to wake you up in the
morning.
To set the alarm:
1. Choose the type of alarm to be set and press the Select soft
key or the
key.
2. Enter the time for the alarm to sound.
Note: Your phone is preset to a 12-hour format. To change the time
format, see “Time & Date” on page 133.
Applications
129
If you want to use the alarm options, press the Options soft
key. The following options are available:
• Remove Alarm: deactivates the current alarm.
• Alarm Tone: allows you to select an alarm melody.
3. Press the OK soft key or the
key..
4. Choose AM or PM using the Up and Down keys and press the
OK soft key or the
key.
5. If you select Wake-up Call in step 1, select the repeat option,
Monday to Friday or Monday to Saturday and press the
Select soft key or the
key.
To stop the alarm when it rings, open the phone and press
the Exit soft key, Volume keys, C key,
key and the
key.
Remove Alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the alarm
rings at the specified time, even if the phone is switched
off.
Note: If the option is set to Disable and the phone is switched off at the
specified time, the alarm does not ring.
Calendar
With the Calendar feature, you can:
♦consult the calendar.
♦write memos to keep track of your schedule.
♦set an alarm to act as a reminder, if necessary.
Consulting the Calendar
When you select the Calendar menu (Menu 7.2), the
calendar displays with today’s date highlighted. The
Applications
130
following options are available when you press the
Options soft key:
Search All: displays all memos set, starting with the
oldest, regardless of the day. To scroll through the memos,
press the Up or Down key.
Delete All: allows you to delete all of the memos. You are
asked to confirm your action.
Go to Date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to Idle mode.
Writing a Memo
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the Navigation keys.
Note: To skip to the previous or next month, press the Volume
keys on the left side of the phone.
2. Press the
soft key.
An empty memo screen displays to allow you to enter your
memo.
3. Enter your memo and then press the OK soft key or the
key.
Note: For further details about how to enter characters, see
page 43.
You are asked if you wish to set an alarm.
4. If you want the alarm to ring on the chosen day, press the Yes
soft key or the
key.
Otherwise, press the No soft key. The memo is saved and
the display returns to the calendar.
Applications
131
5. If you pressed the Yes soft key or the
key, set the time for
the alarm and press the OK soft key or the
key.
You can also select the melody for the alarm by pressing the
Melody soft key or the
key.
6. Select either AM or PM and press the Select soft key.
Note: Your phone is preset to use 12-hour format. To change
the time format, see page 133.
The color of the date on the calendar changes to green to
indicate that a memo exists for that date.
Editing a Memo
When you select a day for which a memo already exists on
the calendar, you can press the
key to access the
memo. Select the Options soft key and select Edit soft to
edit the memo displayed.
Note: For further details about how to enter characters, see “Entering Text” on
page 43.
When you finish editing the memo, press the OK soft key
to use the following options:
New: allows you to create a new memo.
Edit: allows you to edit the memo you have selected.
Alarm: allows you to set the alarm to ring at the specified
time to remind you of the memo. If you set the alarm
earlier, you can change or delete it.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another date or
time.
Move to: allows you to change the date or time of the
memo.
Applications
132
Time & Date
This menu allows you to change the current time and date
displayed. You can also check the current time for 23
major cities around the world.
The following options are available:
Set Time: allows you to enter the current time. You can
choose the time format in the Time Format menu (Menu
7.3.4).
Note: Before setting the time, you must specify your time zone in the World
Time menu (Menu 7.3.3).
Set Date: allows you to enter the month, day and year.
World Time: allows you to find out what time it is another
part of world, using the Left and Right navigation keys.
The screen shows the:
♦city name.
♦time difference between the selected city and your city
if you have set the local time (see below for further
details).
♦current date and time.
♦city selected as your time zone.
To select your time zone:
1. Select the city corresponding to your time zone by pressing
the Left or Right key one or more times. The local date and
time display.
2. Press the Set soft key or the
key.
Time Format: allows you to change the time format to 24
Hours or 12 Hours.
Applications
133
Auto Update: This option sets your clock time from the
Cingular network. You can choose Off, On, and Confirm
First.
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication and division.
1. Enter the first number using the numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until the
symbol you want displays.
2. Press the right soft key until the symbol you want displays: +
(addition), - (subtraction), * (multiplication), / (division).
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
To Do List
This feature allows you to:
♦enter a list of tasks to be done.
♦assign a priority and a deadline to each task.
♦sort the tasks by priority and status mark.
Creating the To Do List
1. If this is your first or only to do, press the New soft key,
otherwise press the Options soft key.
2. Press the New soft key.
3. Enter the first task.
Applications
134
Note: You can enter up to 40 characters. For further details
about how to enter characters, see “Entering Text” on page 43.
4. Press the OK soft key or the
key.
5. Select high, normal or low priority using the Up or Down key
and press the Select soft key or the
key.
6. Enter your deadline and press the OK soft key or the
key.
If you do not want to set a deadline, press the Skip soft key.
Editing the To Do List
Editing the To Do List
When you select the To Do List menu (Menu 7.5), the
current contents display with the status mark if the task
has been done and priority;
for High,
for Normal
and
for Low.
You can use the following options:
Action
Procedures
View the details
for a specific
task
➀ Highlight the task.
➁ Press the View soft key.
➂ Scroll through the tasks using the
Up and Down keys, if necessary.
Applications
135
Action
Change the
status of a
specific task
Procedures (Continued)
➀ Highlight the task.
➁ Press the key to mark the task as
completed as of the current time and
date.
or
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Mark option.
➃ Select the appropriate status (Done
or Undo).
Create a new
task
➀ Press the Options soft key.
➁ Select the New option.
➂ Enter the text, priority and/or
deadline for the task.
Edit an existing
task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Edit option.
➃ Change the text, priority and/or
deadline for the task.
Sort the existing ➀ Press the Options soft key.
tasks by priority ➁ Select the Sort option.
or status
➂ Select the sort criterion (High, Low,
Done or Undo).
Applications
136
Action
Copy a task
Procedures (Continued)
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Copy option.
➃ Change the text, priority and/or deadline
for the task.
Copy a task to the
calendar
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Copy to Calendar option.
➃ Change the text and deadline for the
task and set the alarm.
Delete a task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Delete option.
Delete all tasks
➀ Press the Options soft key.
➁ Select the Delete All option.
➂ Confirm the deletion by pressing
the OK soft key.
Exit the To Do
list
➀ Press the Options soft key.
➁ Select the Exit option.
Voice Memo
You can record voice memos. After recording, you can
send a memo to other people using the Multimedia
Message Service.
Applications
137
Record
This menu allows you to record a new memo. When you
select this option, the display shows the 30-second timer.
1. To start recording, press the Record soft key.
2. Record a memo by speaking into the
microphone.
3. When you press the Stop soft key or if the
recording time expires, the following options
display:
♦Replay: plays back your memo.
♦Re-record: discards the memo and enables you to record
another one.
♦Save: allows you to save the memo.
♦Quit: cancels your recording and exits the Record menu.
4. To save the memo, choose Save from the options
and press the Select soft key.
5. Press the C key to clear the default name, if
necessary, and enter a name for the memo.
For further details about entering characters, see
page 51.
6. Press the OK soft key.
The memo is saved and then the display shows the
memo information.
7. Press the Options soft key to use the following
memo options:
Applications
138
♦Send: allows you to send the memo to other people by
using the MMS feature.
♦Rename: allows you to change the memo’s name.
♦Delete: deletes the memo.
8. To exit, press the C or
key.
Voice Memo List
This menu shows your voice memo list. Scroll to a memo
and press the Options soft key. The following options are
available:
Play: plays the memo.
Send: allows you to send the memo to other people by
using the MMS feature.
Rename: allows you to change the memo’s name.
Information: displays information about the memo, such
as the name, date when the memo was made, recording
duration and memory size.
Delete: allows you to delete the memo.
Delete All
In this menu, you can delete all of your voice memos.
When a confirming message appears, press the Yes soft
key. To cancel the deletion, press the No soft key.
Memory Status
You can check the amount of memory for voice memos.
♦The display shows you the total, free and used
space including the number of memos you
recorded and the total number of memos you
can record.
Applications
139
Currency Exchange
Using this menu, you can figure currency conversions.
1. Enter the current exchange rate of your source currency and
press the OK soft key or the
key.
You can insert a decimal point by pressing the
key.
2. Enter the amount to convert and press the OK soft key or the
key.
The amount you entered and its equivalent value display.
3. Press the Exit soft key to exit the currency converter.
Applications
140
My MEdia
The My MEdia menu option is used to access the internet
and the following available options listed.
MEdia Net
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to allow you to access and navigate the
Wireless Web using your phone.
Home
Selecting this menu connects the phone to the network
and loads the homepage of the Wireless Web service
provider. You can also press the
key in Idle mode.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To scroll
through the screen, use the Up and Down keys.
Note: To access the startup homepage from any other screen in the WAP
Browser, use the Home option.
Exiting the WAP Browser
To exit the browser at any time, simply press the
or press and hold the
key.
My MEdia
141
key
Navigating the WAP Browser
To
Press the
scroll through and
select browser
items
Up or Down key until the text
is reversed highlighted.
Press the Options soft key
then the Select soft key to
make the selection.
select a numbered corresponding numeric key.
item
return to the
previous page
Back soft key or the
key.
return to the startup Select the Menu soft key
homepage
and key and the Home
menu option.
Entering Text in the WAP Browser
When you are prompted to enter text, the current text input
mode is indicated on the screen.
The following modes are available:
Upper-case character (A): allows you to enter uppercase English characters.
Lower-case character (a): allows you to enter lower-case
English characters.
Note: You can enter symbols in upper or lower-case character mode by
pressing the
key.
Number (1): allows you to enter numbers.
My MEdia
142
To change the Press the
text input mode times.
key one or more
To enter a
space
Press the
key.
To edit text
1. Set the cursor to the right of the
character(s) to be corrected.
2. Press the
key as required.
3. Enter the correct character(s).
Selecting and Using Menu Options
Various menus are available when you are using the WAP
Browser to navigate the Wireless Web.
To access a menu option:
1. Press the Menu soft key.
A menu displays.
2. Highlight a menu by pressing the Up and Down keys.
3. Select the option by pressing the Select soft key or the
key.
4. If necessary, select a secondary option using the Up and
Down keys, and press the Select soft key to confirm.
Note: The menus may vary, depending on your version of the WAP Browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the homepage of the
Wireless Web service provider.
My MEdia
143
Goto URL: allows you to manually enter the URL address
of a Web page. After entering an address, press the OK
soft key to go there directly.
Show URL: displays the URL address of the site to which
you are currently connected. It also enables you to declare
the current site as the startup homepage.
To
Press the
declare the current Option soft key, select the
page as your startup Save to Home option and
homepage
press the Select soft key.
set a bookmark for
the current page
Option soft key, select the
Save to Bookmark option
and press the Select soft
key.
cancel your setting Back soft key.
Edit Home: allows you to change the startup homepage
manually. Enter the required URL and press the OK soft
key. For more information about entering text, see
page 142.
Favorites
This menu allows you to store the URL addresses of your
favorite web sites. You can access this menu directly by
pressing and holding down the
key while using the
WAP Browser.
To store a URL address:
1. Select an empty location and press the Options soft key or
the
key.
My MEdia
144
2. Enter the address and press the Enter soft key or the
key.
Note: For further details about how to enter characters, see “Entering Text” on
page 43.
3. Enter a name for the favorite item and press the Enter soft
key or the
key.
After saving favorite items, you can use the following
key:
options by pressing the Options soft key or the
Goto URL: takes you to the site.
Edit: allows you to edit the address.
Erase: deletes the address.
http://
This menu allows you to manually enter the URL address
of the web site that you wish to access.
For further details about entering characters, see “Entering
Text” on page 43.
Settings
This option allows you to set up five proxy servers for the
WAP browser. Contact your service provider for details.
For each server, the following options are available:
Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays, you can
delete it using the
key and enter your own choice.
Security: set the data transmission mode. Choose Secure
to protect your data against unauthorized access;
otherwise, choose Non-Secure.
My MEdia
145
Bearer: select the bearer to be used for each type of
network address accessed: GPRS or Data. The remaining
options depend on the Bearer setting.
When the bearer is set to GPRS
User Name: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
1. APN: enter the access point name used for the address of the
GPRS network gateway.
When the bearer is set to Data
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone number.
Data Call Type: select a data call type: Analog or ISDN.
IP Address: enter the WAP gateway address required to
connect to the Internet.
Note: The WAP Browser settings may vary, depending on the service provider.
Contact your service provider for further information.
Clear Cache
You can clear the information stored in the cache, which is
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
key.
press the No soft key or the
Games
The Games menu lists games delivered with your phone
and the option to shop for more games using the WAP
My MEdia
146
Browser. Use the Up and Down keys to your selection and
key.
press the Select soft key or the
For more information see “MEdia Mall” on page 119.
Audio
Use the Audio menu to launch the WAP Browser to
download additional ringtones. Use the Up and Down
keys to your selection and press the Select soft key or the
key.
For more information see “My MEdia” on page 141.
Graphics
The Graphics menu provides the option to launch the
WAP Browser to download additional graphics and
photos. Use the Up and Down keys to your selection and
key.
press the Select soft key or the
For more information see “Shop Graphics” on page 120.
Delete All
This menu allows you to delete all of the downloaded
items in the Games, Audio or Graphics folders. You can
delete all of the items at one time.
To
select a folder to
clear
place or remove a
check mark
delete the marked
items
Press the
Up or Down key. To delete all of
your items, select All.
key.
Delete soft key.
My MEdia
147
When a confirming message displays, press the Yes soft
key or the
key to confirm.
Memory Status
You can check the amount of memory being used and the
memory remaining for Games, Audio and Graphics folder.
Games: the display shows the total, free and used space
and the number of games downloaded.
The display shows the total, free and used space,
including the memory status used by sounds and images.
My MEdia
148
Phone Settings
The Phone Settings menu contains the following features
of your phone.
● Display Settings
● Greeting Message
● Own Number
● Language
● Security
● Extra Settings
● Short Cut
● TTY Setting
● Reset Settings
Display Settings
You can change the background image, the display style
for Menu mode, lighting preferences and front LCD
settings according to your preference.
Wallpaper
This option allows you to change the background image to
be displayed in Idle mode.
To change the background image:
1. Use the Up or Down navigation key to highlight the wallpaper
list. Press the Select soft key or the
key.
2. Use the Up or Down key to select the image you want. Press
the Select soft key or the
key.
You have various preset images available. You can also
select the blank background or any downloaded images.
Phone Settings
149
3. When the image displays, press the Select soft key.
4. To display the time and date, you must enable the Text
Display option.
Front LCD
This menu allows you to adapt the color of external display
to your preference.
Menu Style
This menu allows you to select the menu display style. You
can choose Grid, Bar, or Page Style.
Shop Graphics
This option opens the WAP browser to a web site where
you can download additional graphics.
Back Light
You can select a set amount of time for your back light to
display.
To select the length of time for which the backlight is on,
use the Up and Down keys to highlight the desired time
and press the Select soft key.
Service Light
This menu allows you to select whether or not the service
light is used or in which color it flashes.
Select one from the 7 color combinations. The service
light flashes in the appropriate color.
If you do not want to use the service light, select Off.
Phone Settings
150
Graphic Logo
This menu allows you to display your service provider’s
logo instead of its name.
Off: the service provider’s name displays in Idle mode.
On: the service provider’s logo displays in Idle mode; if no
logo has been stored, the service provider’s name
displays.
Greeting Message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
To
Press the
clear the existing C key and hold it down until
message
the message is cleared.
enter a new
message
change the text
input mode
appropriate alphanumeric
keys.
soft key.
Own Number
This function is a memory aid, which you can use to check
your own phone number if necessary.
Language
You can select a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of the SIM card used.
Phone Settings
151
Security
The Security feature enables you to restrict the use of your
phone to the people and the types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the following
sections.
Note: Depending on your country, service provider, or the software
version of the phone, the Automatic option may not display.
PIN Check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch the phone on.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
Disable: the phone connects directly to the network when
you switch it on.
Enable: you must enter the PIN each time the phone is
switched on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN Check feature is enabled. You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Settings
152
Phone Lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 8-digit phone password
each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see the Change Password
menu.
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone password
when you switch the phone on.
Enable: you are required to enter the phone password
when you switch the phone on.
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
Privacy
Using this menu, you can lock your media contents, such
as multimedia messages, memo list, graphics and autio.
Once you have locked the contents, you must enter the
phone’s password to access the associated menus.
Phone Settings
153
To
select an item to lock
Press the
Up or Down key. To lock all of
the contents, select All.
place or remove a
check mark
1. Press the OK soft key or the
items.
key.
key to lock the marked
2. When the phone asks for the password, enter the password
and press the OK soft key or
key.
Note: The password is preset to “00000000” at the factory. To change
this password, see page 153.
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code to unlock the SIM so you can use a different SIM
card.
Once you have entered the lock code, you are asked to
confirm your entry.
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited
set of phone numbers.
The following options are available:
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Phone Settings
154
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Extra Settings
You can turn the automatic redialing or answering features
on or off.
To turn a feature
on
Press the
key.
ON soft key or the
A check mark displays in
front of the option.
off
OFF soft key or the
key.
The check mark no longer
displays.
The following options are available:
Auto Redial: when this option is checked, the phone
makes up to ten attempts to redial a phone number after
an unsuccessful call.
Note: The interval between two call attempts varies.
Phone Settings
155
Open to Answer: when this option is checked, you can
simply open the folder to answer a call. When it is
unchecked, you must open the folder and press a key to
answer a call, depending on the setting of the Anykey
Answer option. See below.
Anykey Answer: when this option is checked, you can
answer an incoming call by pressing any key, except the
key and the Reject soft key. To reject the call, press
the
key or the Reject soft key.
When this option is unchecked, you can only press the
key or Accept soft key.
Short Cut
The Navigation keys can be used as shortcut keys. In Idle
mode, they allow you to access specific menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by pressing the
Up or Down key, and press the Select soft key or the
key.
• Key Down
• Key Right
• Key Left
2. Select the menu to be assigned to the key by pressing the Up
or Down key.
Note: To deactivate a shortcut key, select the None option.
3. Press the Select soft key or the
key to save the selection.
TTY Setting
TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are
Phone Settings
156
deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone.
Your phone is compatible with select TTY devices which
have an internal CTM. Please check with the manufacturer
of your TTY device for connectivity information and to
ensure that the TTY device supports digital wireless
transmission.
Note: The TTY option is not viewable but can be accessed by entering 9 on the
keypad from this menu.
Use the following steps to access the TTY settings:
1. From the menu screen select Phone Settings (Menu
9).
2. Press the 9 key to access this function.
3. Enter 4-T-T-Y or (4889) in the password field and press
the OK soft key.field.
The following options are available:
Enable: CTM is active and TTY is available for use.
Disable: CTM is not available for use.
Note: For additional technical support you may access the following website or
call 1-888-987-4357.
http://www.samsungtelecom.com/contact_us/
accessibility.asp
Reset Settings
You can easily reset your phone to its default settings. To
reset your phone:
1. Select the Reset Settings menu.
Phone Settings
157
2. Enter the 4-8 digit password and press the OK soft key or the
key.
Note: The password is preset to “00000000.” To change this password, see
page 153.
Phone Settings
158
Solving Problems
If you are experiencing problems with your phone, perform
the following simple checks before contacting a service
professional. This may save you the time and expense of
an unnecessary service call.
When you switch your phone on, the following messages
may appear
Insert SIM Card
♦Check that the SIM card is correctly installed.
Phone Locked Enter Password
♦The automatic locking function has been enabled. You
must enter the phone’s password before you can use
the phone.
Enter PIN
♦You are using your phone for the first time. You must
enter the Personal Identification Number supplied
with the SIM card.
♦The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered. To
disable this feature, use the PIN Check menu.
Enter PUK
♦The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your service provider.
Solving Problems
159
“No service,” “Network failure” or “Not done” displays
♦The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
♦You are trying to access an option for which you have
not taken out a subscription with your service
provider. Contact the service provider for further
details.
You have entered a number but it was not dialed
♦Have you pressed the
key?
♦Are you accessing the right cellular network?
♦You may have set an outgoing call barring option.
Your correspondent cannot reach you
♦Is your phone switched on (the
key pressed for
more than one second)?
♦Are you accessing the right cellular network?
♦You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
♦Have you switched off the microphone?
♦Are you holding the phone close enough to your
mouth? The microphone is located at the bottom of
the phone.
The phone starts beeping and “**Warning** Low Battery”
flashes on the display
♦The battery is insufficiently charged. Recharge the
battery.
Solving Problems
160
The audio quality of the call is poor
♦Check the signal strength indicator on the display
( ); the number of bars indicates the signal strength
from strong (
) to weak ( ).
♦Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a Phonebook entry
♦Check that the number has been stored correctly, by
using the Phonebook Search feature.
♦Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung aftersales service.
Solving Problems
161
Solving Problems
162
Access Codes
There are several access codes that are used by your
phone and its’ SIM card. These codes help you protect the
phone against unauthorized use.
When requested for any of the codes explained below,
enter the appropriate code (displayed as asterisks) and
key. If you make a mistake,
press the OK soft key or the
press the
key until the incorrect digit is cleared and
then continue entering the correct code.
The access codes, except for the PUK and PUK2 codes
can be changed using the Security menu. See “Security”
on page 152 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 911, to prevent accidental
dialing of an emergency number.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The phone
password is supplied with the phone and is preset to
“00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
“Phone Settings” on
page 149
change the phone
password
“Phone Settings” on
page 149.
Access Codes
163
PIN
The Personal Identification Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is
usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession, the
code is disabled and cannot be used until you re-enable it
by entering the PUK. See below.
To
See
activate/deactivate the
PIN Check feature
“Security” on
page 152
change the PIN
“Security” on
page 152.
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied with the
SIM card. If not, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key or the
key.
2. Enter a PIN of your choice and press the OK soft key or the
key.
3. When the Confirm New PIN message displays, enter the
same code again and press the OK soft key or the
key.
When you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
Access Codes
164
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the functions
until you re-enable it by entering the PUK2.
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with
some SIM cards, is required to change a disabled PIN2. If
you lose the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key or the
key.
2. Enter a new PIN2 of your choice and press the OK soft key or
the
key.
3. When the Confirm PIN2 message displays, enter the same
code again and press the OK soft key.
When you enter an incorrect PUK2 ten times in
succession, you are not able to access the functions
requiring the PIN2. Contact your service provider for a
new card.
Access Codes
165
Access Codes
166
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on the
safety standards that were developed by independent
scientific organizations through periodic and through
evaluation of scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless phones employs a unit
of measurement known as Specific Absorption Rate
(SAR). The SAR limit recommended by the FCC is
1.6W/kg.1
SAR tests are conducted using standard operating
positions specified by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
1. In the U.S. and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
Health and Safety Information
167
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output
of the phone.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID printed
in the label on the phone.
FCC certification information for this model phone is
attached separation paper.
Health and Safety Information
168
For Body Operation
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines when
used with a Samsung-supplied or approved accessory
designated for this product or when used with and
accessory that contains no metal and that positions the
handset a minimum from the body.
The minimum distance for this model phone is written in
the FCC certification information from the body. None
compliance with the above conditions may violate FCC RF
exposure guidelines.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Health and Safety Information
169
Precautions When Using Batteries
♦Never use any charger or battery that is damaged in any
way.
♦Use the battery only for its intended purpose.
♦If you use the phone near the network’s base station, it
uses less power; talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
♦Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a
new battery.
♦If left unused, a fully charged battery will discharge
itself over time.
♦Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to
a charger for more than a week, since overcharging
may shorten its life.
♦Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
♦Do not leave the battery in hot or cold places, such as
in a car in summer or winter conditions, as you will
reduce the capacity and lifetime of the battery. Always
try to keep the battery at room temperature. A phone
with a hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion batteries
are particularly affected by temperatures below 0 °C
(32 °F).
Health and Safety Information
170
♦Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin, clip
or pen) causes a direct connection between the + and
– terminals of the battery (metal strips on the
battery), for example when you carry a spare battery
in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the shortcircuiting.
♦Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
2. When available, use a hands-free device. If possible, add an
extra layer of convenience and safety to your wireless phone
with one of the many hands-free accessories available today.
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes from
the road. If you get an incoming call at an inconvenient time,
let your voice mail answer it for you.
Health and Safety Information
171
4. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving.
Jotting down a To Do list or flipping through your phonebook
takes your attention away from your primary responsibility,
driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try to
plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check the
road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that
may be distracting. Make the people with whom you are
talking aware that you are driving and suspend conversations
that have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial the emergency
number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless
phone!
9. Use your wireless phone to help others in emergencies. If you
see a car accident, crime in progress or other serious
emergency where lives are in danger, call the emergency
number, as you would want others to do for you.
10. If you see a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or any other special non-emergency
wireless number.
Health and Safety Information
172
Operating Environment
Remember to follow any special regulations in force in any
area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
Health and Safety Information
173
♦should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on.
♦should not carry the phone in a breast pocket.
♦should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be
able to assist you in obtaining this information. Switch your
phone off in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
Health and Safety Information
174
equipment that has been added to your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of the
need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee
Health and Safety Information
175
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network services
and/or phone features are in use. Check with local service
providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Other Important Safety Information
♦Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Health and Safety Information
176
♦Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
♦Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
♦For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including both installed or portable wireless
equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
♦Switch your phone off before boarding an aircraft. The
use of wireless phones in aircraft is illegal and may be
dangerous to the aircraft’s operation.
♦Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
♦Keep the phone and all its parts and accessories out of
the reach of small children’s.
♦Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
♦Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
♦ Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Health and Safety Information
177
♦Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
♦ Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
♦Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
♦Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft
cloth slightly dampened in a mild soap-and-water
solution.
♦Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
♦Do not put the phone in or on heating devices, such as
a microwave oven, a stove or a radiator. The phone
may explode when overheated.
♦Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
♦If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you,
and if necessary, arrange for service.
Acknowledging Special Precautions and
the FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
Health and Safety Information
178
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired
operation.
Information to User
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
♦Reorient or relocate the receiving antenna.
♦Increase the separation between the equipment and
receiver.
Health and Safety Information
179
♦Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
♦Consult the dealer or an experienced radio/ TV
technician for help.
Health and Safety Information
180
Appendix A: CERTIFICATION
INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency(RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
safety standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is
1.6 W/kg. SAR Tests are conducted using standard
operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Appendix A: CERTIFICATION INFORMATION (SAR)
181
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each model.
The highest SAR values for this model phone as reported
to the FCC are Head: 1.37W/Kg, Body-worn: 0.689W/Kg.
Body-worn operations are restricted to Samsung-supplied,
approved or none Samsung designated accessories that
have no metal and must provide at least 1.5cm separation
between the device, including its antenna whether
extended or retracted, and the user’s body. None
compliance to the above restrictions may violate FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGH
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
Appendix A: CERTIFICATION INFORMATION (SAR)
182
additional protection for the public and to account for any
variations in measurements.
Appendix A: CERTIFICATION INFORMATION (SAR)
183
Appendix A: CERTIFICATION INFORMATION (SAR)
184
Appendix B: Guide to Safe and
Responsible Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless Phone Use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY
TAKE ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY
THE WIRELESS TELEPHONE. QUITE SIMPLY, THE
WIRELESS PHONE GIVES PEOPLE THE POWERFUL
ABILITY TO COMMUNICATE BY VOICE-ALMOST
ANYWHERE, ANYTIME-WITH THE BOSS, WITH A
CLIENT, WITH THE KIDS, WITH EMERGENCY
PERSONNEL OR EVEN WITH THE POLICE. EACH
YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
judgment must be exercised at all times while driving a
motor vehicle-whether on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
head up, keep your eyes on the road, check your mirrors
frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within the
speed limit.
Appendix B: Guide to Safe and Responsible Wireless Phone Use
185
It means using seat belts and requiring other passengers
to do the same.
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is
keeping us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such as
speed dial and redial. Carefully read your instruction manual
and learn to take advantage of valuable features most phones
offer, including automatic redial and memory. Also, work to
memorize the phone keypad so you can use the speed dial
function without taking your attention off the road.
2. When available, use a hands free device. A number of hands
free wireless phone accessories are readily available today.
Whether you choose an installed mounted device for your
wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure
you place your wireless phone within easy reach and where
you can grab it without removing your eyes from the road. If
you get an incoming call at an inconvenient time, if possible,
let your voice mail answer it for you.
4. Suspend conversations during hazardous driving conditions
or situations. Let the person you are speaking with know you
are driving; if necessary, suspend the call in heavy traffic or
Appendix B: Guide to Safe and Responsible Wireless Phone Use
186
hazardous weather conditions. Rain, sleet, snow and ice can
be hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If
you are reading an address book or business card, or writing
a “to do” list while driving a car, you are not watching where
you are going. It’s common sense. Don’t get caught in a
dangerous situation because you are reading or writing and
not paying attention to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try to
plan your calls before you begin your trip or attempt to
coincide your calls with times you may be stopped at a stop
sign, red light or otherwise stationary. But if you need to dial
while driving, follow this simple tip-dial only a few numbers,
check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that
may be distracting. Stressful or emotional conversations and
driving do not mix-they are distracting and even dangerous
when you are behind the wheel of a car. Make people you are
talking with aware you are driving and if necessary, suspend
conversations which have the potential to divert your attention
from the road.
8. Use your wireless phone to call for help. Your wireless phone
is one of the greatest tools you can own to protect yourself
and your family in dangerous situations-with your phone at
your side, help is only three numbers away. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident,
road hazard or medical emergency. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your
wireless phone provides you a perfect opportunity to be a
Appendix B: Guide to Safe and Responsible Wireless Phone Use
187
“Good Samaritan” in your community. If you see an auto
accident, crime in progress or other serious emergency
where lives are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless non-emergency
assistance number when necessary. Certain situations you
encounter while driving may require attention, but are not
urgent enough to merit a call for emergency services. But you
still can use your wireless phone to lend a hand. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one appears
injured or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as
we take to the roads, we all have a responsibility to drive
safely.
“The wireless industry reminds you to use your phone
safely when driving.”
Cellular Telecommunications & Internet Association
For more information, please call 1-888-901-SAFE. For
updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID=85
Appendix B: Guide to Safe and Responsible Wireless Phone Use
188
Appendix C: Consumer Update on
Wireless Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC’s compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low
Appendix C:
Consumer Update on Wireless Phones
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the following:
Support needed research into possible biological effects
of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and Cooperate in providing users of wireless
phones with the best possible information on possible
effects of wireless phone use on human health FDA
belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of
Appendix C: Consumer Update on Wireless Phones
190
RF safety to ensure coordinated efforts at the federal level.
The following agencies belong to this working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply
with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
1. What is FDA doing to find out more about the possible health
effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
Appendix C: Consumer Update on Wireless Phones
191
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project has
also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
2. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
Appendix C: Consumer Update on Wireless Phones
192
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected
to a remote antenna
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the
RF exposure from these products, you can use measures
like those described above to reduce your RF exposure
from wireless phone use.
3. What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
Appendix C: Consumer Update on Wireless Phones
193
4. Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against
the waist or other part of the body during use, then that
part of the body will absorb more RF energy. Wireless
phones marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
5. Do wireless phone accessories that claim to shield the head
from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
Appendix C: Consumer Update on Wireless Phones
194
devices that claimed to protect wireless phone users
from radiation with making false and unsubstantiated
claims. According to FTC, these defendants lacked a
reasonable basis to substantiate their claim.
6. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones
can interact with some electronic devices. For this
reason, FDA helped develop a detailed test method to
measure electromagnetic interference (EMI) of
implanted cardiac pacemakers and defibrillators from
wireless telephones. This test method is now part of a
standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The
final draft, a joint effort by FDA, medical device
manufacturers, and many other groups, was
completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance
requirements for hearing aids and wireless phones so
that no interference occurs when a person uses a
compatible phone and a compatible hearing aid at the
19
same time. This standard was approved by the IEEE in
2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
7. What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radiofrequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancercausing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
Appendix C: Consumer Update on Wireless Phones
196
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
8. What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more
years follow-up may be needed to provide answers about
some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing
agent and the time tumors develop - if they do - may be
many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
9. Which other federal agencies have responsibilities related to
potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
Appendix C: Consumer Update on Wireless Phones
197
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”)
warrants to the original purchaser (“Purchaser”) that
SAMSUNG’s Phones and accessories (“Products”) are
free from defects in material and workmanship under
normal use and service for the period commencing upon
Appendix C: Consumer Update on Wireless Phones
198
the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged
due to normal use; (d) malfunctions resulting from the use
of Product in conjunction with accessories, products, or
ancillary/peripheral equipment not furnished or approved
by SAMSUNG; (e) defects or damage from improper
testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by
Appendix C: Consumer Update on Wireless Phones
199
SAMSUNG for charging the battery, (ii) any of the seals on
the battery are broken or show evidence of tampering, or
(iii) the battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG’s sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in an
adequate container for shipping, accompanied by
Purchaser’s sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number of
Product and the sellers’ name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG’s sole option, use
rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather
cases, pouches and holsters will be warranted for a period
of ninety (90) days. All other repaired/replaced Product will
be warranted for a period equal to the remainder of the
original Limited Warranty on the original Product or for 90
days, whichever is longer. All replaced parts, components,
boards and equipment shall become the property of
SAMSUNG. If SAMSUNG determines that any Product is
not covered by this Limited Warranty, Purchaser must pay
all parts, shipping, and labor charges for the repair or
return of such Product.
Appendix C: Consumer Update on Wireless Phones
200
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,”
AND SAMSUNG MAKES NO WARRANTY OR
REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
♦THE MERCHANTABILITY OF THE PRODUCT OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
♦WARRANTIES OF TITLE OR NON-INFRINGEMENT;
♦DESIGN, CONDITION, QUALITY, OR PERFORMANCE
OF THE PRODUCT;
♦THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
♦COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME
AS THE EXPRESS WRITTEN WARRANTY STATED
HEREIN. SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
Appendix C: Consumer Update on Wireless Phones
201
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE
OF, OR INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS
OF USE OF THE PRODUCT OR FROM THE BREACH
OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS, OR FOR DAMAGES ARISING FROM ANY
TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG,
ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH
OF CONTRACT OR FOR ANY CLAIM BROUGHT
AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
Appendix C: Consumer Update on Wireless Phones
202
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER
MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT IS
INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY
TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND
SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT,
AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
Appendix C: Consumer Update on Wireless Phones
203
binding on SAMSUNG. Accordingly, additional statements
such as dealer advertising or presentation, whether oral or
written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Samsung Telecommunications America, L.P.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2004 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [080802]
Appendix C: Consumer Update on Wireless Phones
204
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full advantage
of the features on your mobile phone, here are a few
definitions.
Active Folder
Ability to answer a call simply by opening the phone.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or making
another call; you can then switch between the two calls, as
required.
Call Waiting
Ability to inform users that they have an incoming call when
engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the telephone
numbers of callers.
Dual Band
Ability to operate with both DCS (1900 MHz) and GSM (850
MHz) networks. The phone automatically uses the network with
strongest signal and even switches networks during a call within
the same operator’s network.
Glossary
205
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS) that allows
you to send and receive ring tones and service provider’s logo,
as well as combinations of simple media to and from EMScompliant handsets. Because EMS is based on SMS, it can use
SMS centres the same way that SMS does. EMS works on all
Global System for Mobile communications (GSM) networks.
EMS senders can use text, melodies, pictures, sounds, and
animations to enhance the expressive power of messages that
are limited by the display constraints of mobile devices.
GSM (Global System for Mobile Communication)
International standard for cellular communication, guaranteeing
compatibility between the various network operators. GSM
covers most European countries and many other parts of the
world.
Java
Programming language generating applications that can run on
all hardware platforms, whether small, medium or large,
without modification. It has been promoted for and geared
heavily to the Web, both for public Web sites and Intranets.
When a Java program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it is called a
MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment, standardized by
the WAP Forum and the 3rd Generation Partnership Program
(3GPP). For phone users, MMS is a message service that
provides delivery of user-created content from phone to phone.
The message addressing used is primarily phone numbers, thus
traffic goes from phone to phone. MMS also provides support
for e-mail addressing, so that messages can be sent by e-mail.
In addition to the text content of SMS, MMS messages can
contain still images, voice or audio clips, and also video clips
and presentation information.
Glossary
206
Multi-party Calling
Ability to establish a conference call involving up to five
additional parties.
Phone Password
Security code used to unlock the phone when you have selected
the option to lock it automatically each time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against unauthorized
use. The PIN is supplied by the service provider with the SIM
card. It may be a four to eight-digit number and can be
changed, as required.
Proxy Server
A server that resides between a web client, such as a web
browser, and a real Web server and acts as an intermediary
between them. When some people browse a web site, their
browser is not actually connecting to the web server. The
request from their browser goes to a proxy server, and the
proxy server makes the request to the web server.
A proxy server can improve performance for groups of
users because it cache the results of all requests for a
certain amount of time. If a user requests a web page that
it already fetched for another user, it returns the page
instead of forwarding the request to the Web server, which
can be a time-consuming operation.
PUK (PIN Unblocking Key)
Security code that protects the phone/SIM against unauthorized
use. The PIN is supplied by the service provider with the SIM
card. It may be a four to eight-digit number and can be
changed, as required.
Roaming
Use of your phone when you are outside your home area (when
traveling for example).
Glossary
207
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to
operate the phone (network and memory information, as well
as the subscriber’s personal data). The SIM card fits into a small
slot on the back of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and from
another subscriber without having to speak to the
correspondent. The message created or received can be
displayed, received, edited or sent.
Soft Keys
Two keys marked
which:
and
on the phone, the purpose of
♦varies according to the function that you are currently
using
♦is indicated on the bottom line of the display just above
the corresponding key.
Voice Mail
Computerized answering service that automatically answers
your calls when you are not available, plays a greeting
(optionally in your own voice) and records a message.
Glossary
208
Index
A
Access codes •, 163
Alarm •, 129
Alert type •, 124
Answering
call •, 26
second call •, 51
Anykey answer •, 156
Auto redial •, 155
B
Background image •, 149
Backlight
description •, 16
Barring, calls •, 102
Battery
charging •, 19
installing •, 19
low indicator •, 21
precautions •, 170
removing •, 19
Broadcast messages •, 75
C
Calculator •, 134
Calendar memos
copying •, 132
erasing •, 132
viewing •, 130
writing •, 131
Call back, message •, 68
Call costs •, 123
Call records
missed •, 27, 63
outgoing •, 64
Call time •, 65
Caller groups
editing •, 38
searching •, 37
Caller ID •, 105
Calls
answering •, 26, 51
barring •, 102
ending •, 24
forwarding •, 101
holding •, 49
making •, 23
redialing •, 24
rejecting •, 27
waiting •, 51, 104
Calls Made, 64
Calls Received, 63
Camera, 109
CB (Cell Broadcast) messages
•, 75
Characters, enter •, 43
Charging battery •, 19
Closed User Group (CUG) •, 105
Conference call •, 52
Connect tone •, 127
Currency exchange •, 140
D
Date, set •, 133
Deleting
calendar memo •, 132
e-mail •, 92, 93
Recent Calls •, 63
tasks •, 137
text message •, 68, 69
voice memos •, 139
Delivery reports, message •, 73
Dialed calls •, 64
Display
209
backlight •, 16
icons •, 14
layout •, 13
settings •, 155
DTMF tones, send •, 50
E
Earpiece volume •, 25
E-mail
creating/sending •, 94
deleting •, 92, 93
reading •, 91, 93
setting •, 97
E-mail profile •, 99
Emergency calls •, 175
EMS (Enhanced Message Service) •, 67
Error tone •, 127
F
FDN (Fixed Dial Number) mode
•, 154
Folder tone •, 126
Forwarding
e-mail •, 92
Forwarding, calls •, 101
G
Graphic logo •, 151
Greeting message •, 158
H
Health and safety •, 167
Holding, call •, 49
I
Icons, description •, 14
Inbox, messages
e-mail •, 91
Inbox, messages •, 67
incoming •, 63
210
International calls •, 23
K
Key volume •, 26
Keypad tones
selecting •, 124
sending •, 50
Keys
description •, 10
location •, 9
shortcut •, 156
L
Language, select •, 151
Last number, redial •, 24
Locking
media contents •, 153
phone •, 153
Low battery indicator •, 21
Lower-case characters
entering •, 46
M
Memory status
camera •, 117
downloaded items •, 148
e-mail •, 97
multimedia messages •, 84
phonebook •, 40
text messages •, 74
voice memos •, 139
Menu style •, 150
Menus
accessing •, 55
list •, 56
Message tone •, 124
Messages
cell broadcast •, 75
e-mail •, 90
greeting •, 158
reading •, 67
setting •, 72
text •, 67
voice •, 75
Minute minder •, 127
Missed calls •, 27, 63
Multi-party calls •, 52
Muting
all sounds •, 29
key tones •, 50
microphone •, 50
N
Names
entering •, 43
searching/dialing •, 36
Network selection •, 104
Network services •, 101
Numbers, phone
searching/dialing •, 36
storing •, 33
O
On/off switch, phone •, 21
Organizer •, 129
Outbox, messages
e-mail •, 93
Outbox, messages •, 68
Own number •, 151
P
Password
call barring •, 103
phone •, 153, 163
Phone
care and maintenance •,
177
display •, 13
icons •, 14
keys •, 10
layout •, 9
locking •, 153
password •, 163
resetting •, 157
switching on/off •, 21
unpacking •, 7
Phonebook
copying •, 35
editing •, 35
options •, 35
searching/dialing •, 36
speed-dialing •, 39
storing •, 33
Photos
deleting •, 112
PIN
changing •, 152
description •, 164
PIN2
changing •, 155
description •, 165
Power on/off tone •, 126
Problems, solving •, 159
PUK •, 164
PUK2 •, 165
R
Radio-frequency •, 167
Received calls •, 63
Received messages
e-mail •, 91
Received messages •, 67
Recording
voice memos •, 138
Redialing
automatically •, 155
manually •, 24
Resetting phone •, 157
211
Ring tone •, 123
Ring type •, 124
Ring volume •, 123, 150
Road safety •, 171
Roaming •, 104
S
Safety
information •, 167
Scheduler •, 130
Searching, phonebook •, 36
Security, calls •, 152
Sent messages
e-mail •, 93
Sent messages, text •, 68
Service light •, 16, 150
Shortcut, menu •, 156
SIM card
installing •, 17
SIM Lock •, 154
SMS (Short Message Service)
Inbox •, 67
Outbox •, 68
Soft keys •, 31
Sound settings •, 123
Speed-dialing •, 39
Switching on/off
microphone •, 50
phone •, 21
T
T9 mode, text input •, 45
Tasks, to do list
creating •, 134
editing •, 135
Templates
e-mail •, 96
Templates, message, text •, 72,
79
212
Text input mode •, 44
Text message
creating/sending •, 69
deleting •, 68, 69
reading •, 67, 68
setting •, 72
Text, enter •, 43
Time format •, 133
Time, set •, 133
To do list •, 134
Tone
connect •, 127
error •, 127
folder •, 126
keypad •, 124
message •, 124
minute minder •, 127
power on/off •, 126
ring •, 123
Travel adapter •, 19
U
Upper-case characters
entering •, 46
User group •, 105
V
Vibration •, 29, 124
Voice mail •, 75
Voice memos
deleting •, 139
playing •, 139
recording •, 138
Voicemail server •, 64
Volume, adjust
keypad tone •, 26
ring •, 123
Volume,adjusting
earpiece •, 25
W
Waiting call •, 51, 104
Wallpaper •, 149
WAP browser
cache, clear •, 146
favorites •, 144
setting •, 145
World time •, 133
Writing messages
e-mail •, 94
Writing messages •, 69
213
214
Dual Band SGH-e317 GPRS Telephone
Quick Reference Card
Access the
Menu
Functions
➀ Press the Menu soft key.
➁ Scroll with the Up and Down
keys through the list of the
menus until you reach the
required menu.
Switch On/Off
Press and hold the
Make a Call
➀ Key in the number.
➁ Press the
key.
➂ Press the Select soft key.
End a Call
Briefly press the
View Missed
Calls
Immediately
After Missing
Them
➀ Open the phone and press
the View soft key.
➁ Scroll with the Up and
Down keys through the
missed calls.
➂ To return the call, press the
key.
➃ Scroll with the Up and Down
keys through the list of the
options until the required one
is selected.
➄ Press the Select soft key.
Each of the two soft keys (
and
)
perform the function indicated by the text
above it, on the bottom line of the display.
key.
key.
Answer a
Call
Press the
or
key on the
left side of the phone.
Open the phone
or
Press the
key.
➀ Select the Alert Type
menu option (Menu 6.4).
Adjust the
Volume
Choose
the Alert
Type
➁ Select an option:
Light only
Melody
Vibration
Vibra+Melody
➂ Press the Select soft key.
Search for a
Number in
Phonebook
Store Numbers
in Phonebook
➀ Press the Name soft key.
➁ Select the Search option.
➂ Enter the first few letters of
the name.
➃ To scroll through the names,
press the Up or Down key.
➄ Press the View soft key.
➅ To scroll through the
numbers, press the Up or
Down key.
➆ Press the
key to dial.
➀ Enter the number.
➁ Press the Save soft key.
➂ Select an icon for label.
➃ Press the Select soft key.
➄ Enter the name.
➅ Press the OK soft key.
➆ If necessary, change the
memory.
➇ Press the OK soft key.
➈ Press
to return to Idle
Mode.