P735
User Manual
E2997
First Edition
February 2007
Copyright © 2007 ASUSTeK Computers, Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUS Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING
DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA,
INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL
OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT
NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES
NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY
APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks
or copyrights of their respective companies, and are used only for identification or explanation and
to the owners’ benefit, without intent to infringe.
Table of Contents
P735 specifications................................................................................ 8
Package contents................................................................................... 9
Chapter 1: Getting started
Getting to know your P735.................................................................. 12
Layout
...................................................................................................... 12
Device components description..................................................................... 14
Getting your device ready.................................................................... 16
Installing the SIM card and battery................................................................ 16
Charging the battery...................................................................................... 18
Starting up............................................................................................. 19
Powering your device..................................................................................... 19
Using the stylus.............................................................................................. 19
Calibrating P735............................................................................................ 20
Locking the keys and buttons........................................................................ 20
The Today screen................................................................................. 21
Status indicators............................................................................................ 22
Screen orientation.......................................................................................... 25
Start menu..................................................................................................... 26
Chapter 2: Entering data
Using the Input Panel.......................................................................... 28
Using the Block Recognizer........................................................................... 28
Using the On-screen keyboard...................................................................... 29
Using the Letter Recognizer.......................................................................... 30
Using the Transcriber..................................................................................... 31
Writing and drawing on the screen..................................................... 32
Recording voice.................................................................................... 33
Using ActiveSync™.............................................................................. 35
Synchronizing via mini-USB........................................................................... 37
Synchronizing with Exchange Server................................................. 38
Setting the synchronization schedule............................................................ 40
Searching information.......................................................................... 41
Getting Help.......................................................................................... 42
Chapter 3: Phone features
Using the phone.................................................................................... 44
Phone pad...................................................................................................... 44
Using flight mode........................................................................................... 44
Adjusting the device volume.......................................................................... 45
Making a call......................................................................................... 46
Using the phone pad...................................................................................... 46
Making calls from Contacts............................................................................ 48
Making calls from Call History........................................................................ 48
Using the Speed Dial..................................................................................... 49
Using Voice Commander............................................................................... 50
Receiving a call..................................................................................... 51
Chapter 4: Wireless features
Using the Wireless Manager................................................................ 54
Using Bluetooth®............................................................................................. 55
Overview ...................................................................................................... 55
Activating Bluetooth in your device................................................................ 55
Configuring Bluetooth ................................................................................... 56
Using WLAN (IEEE 802.11b/g)............................................................. 62
Introduction.................................................................................................... 62
Activating WLAN in your device..................................................................... 62
Configuring WLAN ........................................................................................ 63
Setting a GPRS connection................................................................. 65
Connecting GPRS.......................................................................................... 68
Disconnecting GPRS..................................................................................... 69
Using the GPRS Tool..................................................................................... 70
Chapter 5: My Secrets
Using My Secrets.................................................................................. 72
Enabling My Secrets...................................................................................... 72
Unlocking My Secrets.................................................................................... 74
Locking My Secrets........................................................................................ 75
My Secrets setting......................................................................................... 76
Disabling My Secrets..................................................................................... 79
Chapter 6: Multimedia features
Using the camera.................................................................................. 84
Launching the camera................................................................................... 84
Navigation button functions in camera mode................................................. 85
Camera mode screen.................................................................................... 87
Taking photos................................................................................................. 95
Video mode screen........................................................................................ 96
Recording videos......................................................................................... 102
Viewing pictures and video............................................................... 104
Viewing pictures and video.......................................................................... 104
Chapter 7: Other features
WorldCard Mobile............................................................................... 106
Using the WorldCard Mobile........................................................................ 107
Remote Presenter............................................................................... 109
Using the Remote Presenter........................................................................ 109
Setting ring tone..................................................................................115
Adding ring tone to selection.........................................................................115
Changing the ring tone..................................................................................116
Wake-up setting...................................................................................117
Mode switcher......................................................................................118
System information.............................................................................119
Restoring default factory settings.................................................... 120
Chapter 8: Device component status
ASUS status icon................................................................................ 122
CPU mode setting........................................................................................ 123
USB setting.................................................................................................. 123
LCD Brightness............................................................................................ 124
Battery
.................................................................................................... 124
Memory .................................................................................................... 125
Storage card memory.................................................................................. 125
Programs running in memory....................................................................... 126
Settings .................................................................................................... 126
Appendix
Notices................................................................................................. 128
Contact information............................................................................ 132
P735 specifications
Processor
Marvell XScale® processor, 520MHz
Operating System
Microsoft® Windows Mobile™ 5.0
Pocket PC Phone Edition
Memory
256 MB NAND Flash ROM
64 MB SDRAM
Display
2.8-inch, 65, 536-color, 240 x 320-resolution, TFT touch screen LCD
Frequency band
UMTS 2100 MHz, Tri-band GSM (900/1800/1900 MHz)
GPRS
Class B, Multislot class 10
Camera
2.0 mega-pixel CMOS camera with Auto-Focus (AF) and built-in flash
Connectivity
WLAN
Bluetooth
USB
Battery capacity
1300 mAh Lithium Ion
Expansion slot
MiniSD card slot
Audio
2.5 mm audio port
Built-in microphone and speaker
Weight
143g (with battery)
Dimension
109 x 59 x 19 mm
Talk time*
4(3G) hrs ~5(2G) hrs (*vary with different networking environment and scenario)
Standby time*
170~220(3G) hrs; 180~220(2G) hrs (*vary with different networking
environment and scenario)
: 802.11b/g
: V2.0
: USB Client 1.1
NOTE: Specifications are subject to change without notice.
Package contents
Check your P735 package for the following items:
P ASUS P735 device
P Battery
P AC Adapter
P Mini-USB cable
P Headset
P Stylus
P Protection case
P Getting Started CD
P User Manual
P Quick Start Guide
P Warranty Card
NOTE:
If any of the above items is damaged or missing, contact your retailer.
CAUTION:
• To reduce risk of fire, use only correct battery type. Refer to “Installing the SIM card and battery” section for details.
• Do not attempt to disassemble the battery pack.
• Dispose of used batteries properly. Inquire from local authorities for proper disposal of battery.
10
Chapter
Getting started
1
• Getting to know your P735
• Getting your device ready
• Starting up
• The Today screen
11
Getting to know your P735
Components:
Layout
3
2
1
3 Stylus
I
4 Camera button
Top features
7
1 MiniSD slot
2 Power button
5 Volume controller
6 Reset button
9
8
7 Notification LED
4
8 Earpiece receiver
9 Sub camera lens
10 LCD touch screen
11 Call key
5
10
12 Left Soft key
13 Video call button
14 Navigation buttons
15 Action button
16 Right Soft key
12
17 Mode/Task switcher button
16
18 End key
6
11
13
Left side features
12
18
15
17
14
Front features
Getting to know your P735
Components:
19 Camera flash light
20 Self-portrait mirror
20
19
24
22
21
25
21 Camera lens
22 Speaker
23 Battery compartment
24 Voice recorder button
25 Hold button
23
26 Earphone slot
27 Mini-USB connector
28 Mic
Right side features
Rear features
26
27
Bottom features
28
13
Device components description
No.
14
Item
Description
1
MiniSD slot
Allows you to insert a MiniSD storage card.
2
Power button
Press to turn the power ON or to set suspend mode or to wake
device from sleep mode.
Press and hold to turn the power OFF.
3
Stylus
Use the stylus to write, draw, or select items on the touch screen.
4
Camera/Shutter button
Press to launch the camera. In camera mode, half-press to autofocus then full-press to take a picture. In video mode,
full-press to start recording video and press again to stop.
5
Volume controller
Press the arrow buttons to adjust the volume.
6
Reset button
Using the stylus, press reset button to soft-reset your device.
7
Notification LED
This multi-color LED notifies the following:
• Green - Phone fully charged.
• Flashing green - Network detected.
• Red - Phone is charging.
• Flashing red - Event notification.
• Flashing blue - Bluetooth® or WLAN(IEEE 802.11b/g) ON.
8
Earpiece receiver
Allows you to listen to incoming/outgoing calls.
9
Sub camera lens
This sub camera is for the video conference.
10
LCD touch screen
This 2.8-inch, 65536-color, 240 x 320-resolution, touchscreen TFT
LCD allows you to write, draw, or make selections using the stylus.
11
Call key
Press to receive an incoming call or make a call.
12
Left Soft key
Performs the command indicated above the button.
13
Video call button
Press to make video calls.
Device components description
No.
Item
Description
14
Navigation buttons
Use to move through menus. Press the center to run an application or
in camera mode, press to take a picture.
15
Action button
Press to carry out the task of selected item.
16
Right Soft key
Performs the task indicated above the button.
17
Mode/Task switcher button
Allows you to switch applications and tasks.
Press and hold this button to turn on/off the flashlight.
18
End key
Press to end a call.
19
Camera flashlight
Allows you to capture images in a dim environment.
Press and hold the mode switcher button to turn this flashlight on/off.
20
Self-Portrait Mirror
Position your device until this mirror reflects the image you want to capture.
21
Camera lens
This 2-megapixel camera comes with Auto-Focus (AF) lens and flash
light features.
22
Speaker
Allows you to listen audio media and phone calls.
23
Battery compartment
Contains the battery that supplies power to the device.
24
Voice recorder button
Press to luanch the voice commander.
Press and hold to launch the record application to record voice.
25
Hold button
Slide to enable or disable all keys including the LCD touch screen.
26
Earphone port
Plug headset accessory to this port.
27
Mini-USB connector
Use this connector to synchronize your data or to charge the battery.
28
Mic
Used to make or receive phone calls, record sounds, record voice, or
say voice commands.
NOTE: The Voice Command utility is supported in selected languages only.
15
Getting your device ready
Installing the SIM card and battery
Before you can make a phone call using your P735, you need to install a Subscriber Identity
Module (SIM) card. A SIM card contains your phone number, subscriber details, phonebook,
and additional phone memory.
Your P735 comes with a rechargeable Lithium-Ion battery.
New batteries come partially discharged and should be fully charged before using them. They
generally do not reach their rated capacity until they have been charged and discharged at
least four (4) times. We recommend that new batteries be charged overnight even though
they may indicate that the charge is complete after a few hours. Sometimes charging may
stop during the initial charge and it is necessary to remove the battery for approximately
fifteen (15) minutes and then put it back on charge.
CAUTION:
Use only an ASUS qualified battery.
To install a SIM card and battery:
1. Remove the battery compartment cover.
NOTE:
When turned on, the device automatically turns off
after you open the battery compartment to prevent
data loss.
16
2. Remove the battery.
3. Insert the SIM card with its gold
contacts facing down and the notched
corner oriented to the upper left corner
of the slot as shown.
4. Replace the battery into the
compartment with its copper contacts
properly aligned to the copper
conductor on the device.
5. Replace battery compartment cover.
17
Charging the battery
The bundled battery pack is shipped partially charged. Charge the battery up to four (4) hours
before using for the first time.
To charge battery:
1. Connect the AC adapter plug to the mini-USB connector at the bottom of the device.
2. Connect the AC power plug to a grounded wall socket or power strip.
NOTE:
• The notification LED turns red and charging battery icon appears on the status bar indicating that the battery is charging.
• If your battery gets totally discharged, you need to recharge it for at least twenty minutes before you can turn it
back on.
18
Starting up
Powering your device
Make sure that your P735 is fully-charged before starting the device for the first time.
To turn on power:
1. Press and hold the power button.
Power button
2. Follow onscreen instructions to align screen and set the local time zone.
Using the stylus
The stylus is a pen-like device found behind the upper right corner of your P735.
• Use the stylus to write, draw, select, or drag an item on the screen.
• Single-tap an item to select it.
• Tap and hold an item to see a menu.
Stylus
19
Calibrating P735
Calibrating your device ensures that the item you tap on the screen is activated. This involves
tapping in the center of targets that appear in various coordinates on the screen.
To calibrate your screen:
1. Tap Start > Settings > System tab
then tap Screen icon.
2. On the General tab tap Align Screen
then follow succeeding calibration
screen instructions.
Locking the keys and buttons
You can lock the keys and buttons of your device to avoid inadvertently dialing numbers or
launching any application. To lock the keys and buttons:
1. Locate the Hold button on the right side of your device.
2. Slide the hold button downward to lock.
3. To unlock, slide the hold button upward.
Hold button
20
The Today screen
The Today screen displays information useful to you. You can configure the Today screen to
have all the important information you need.
• To access the Today screen, tap Start > Today.
• To personalize the Today screen, tap Start > Settings > Personal tab > Today.
The following describes the common information found on the today screen:
Status bar
Tap to open the Start menu
Tap to setup date, time, and alarm
Indicates the battery status
Tap to adjust volume
Displays the signal status
Tap to launch Wireless Manager
Tap to set user information
Tap to open messages
Tap to setup tasks
Tap to setup profile
Tap to read or make appointments
Tap to sign in Pocket MSN
Tap to view connectivity status
Displays the Bluetooth®
connection status
Tap to change Bluetooth­
settings
Tap to display system CPU,
USB setting, LCD brightness,
battery, memory, and MiniSD
status
Tap to change WLAN
(IEEE 802.11b/g) settings
Tap to lock, unlock, or change
My Secrets settings
(Appears only when My Secrets is enabled.)
Tap to change screen
orientation
Tap to display call history
Tap to launch Contacts list
21
Status indicators
Refer to the table below for the Today screen icon status indicators.
Icon
Description
General Packet Radio Services (GPRS) available.
Connecting via GPRS.
Connected via GPRS.
Connecting with ActiveSync
ActiveSync connection not active.
ActiveSync synchronization in progress.
Synchronization error.
Call forwarded.
Call in progress.
Call on hold.
Missed call.
New message.
22
Status indicators
Icon
Description
New voice mail.
No cellular phone service.
No signal.
Searching for cellular phone service.
Indicates signal strength.
Sound OFF.
Sound ON.
Battery low.
Battery extremely low.
Battery partially charged.
Battery charging.
Battery fully charged.
Searching Wi-Fi connection.
23
Status indicators
Icon
Description
Wi-Fi active.
Roaming service. This icon appears only if you have international roaming feature.
Vibrate or silent mode on.
Bluetooth headset connected.
Bluetooth headset connected with sound.
Appears when you set the alarm
No SIM installed.
Notice indicator. Tap to view notice.
Pocket MSN service notification.
Pocket MSN chat is online.
3G network available
3G connected
ActiveSync over 3G in use
24
Screen orientation
You can set the screen to three different orientations:
1. Portrait
2. Landscape (right-handed)
3. Landscape (left-handed)
Set to Portrait mode to get a better view or better operation of certain applications on your
device. Set to Landscape when viewing pictures, video or viewing longer text files.
To change the screen orientation, tap Start > Setting > System tab > Screen then select the
orientation you want.
You can also change the orientation by tapping the
icon.
Landscape mode
Portrait mode
25
Start menu
The Start menu contains various programs and applications that you commonly use.
Tap Start to display the start menu items:
Portrait mode
Landscape mode
You can also customize the items that appear in the
Start menu.
To do this:
1. Tap Start > Settings > Personal tab > Menus.
2. Select the check boxes of the items you want to
appear in the Start menu. You can select up to
seven (7) items.
26
Chapter
Entering data
2
• Using the Input Panel
• Writing and drawing on the screen
• Recording voice
• Using ActiveSync™
• Synchronizing with Exchange Server
• Searching information
• Getting Help
27
Using the Input Panel
When you start an application or select a field that requires text, symbols, or numbers, the
Input Panel icon appears on the menu bar. The Input Panel allows you to select various input
methods including: Block Recognizer, Keyboard, Letter Recognizer, and Transcriber.
Using the Block Recognizer
The Block Recognizer allows you to use a single stroke to write letters, numbers, symbols, or
punctuations, which are converted into typed text.
To use the Block Recognizer:
1. In an application, tap the Input Panel arrow, then tap Block Recognizer.
2. Write letters, numbers, symbols, or punctuations in the designated writing area.
• Write letters on the abc (left) area of the box.
• Write numbers on the 123 (right) area of the box.
• Tap the special symbols button to key in symbols, punctuations
and other special characters.
• Tap Help “?” button for help on how to write characters.
Tap for special
characters
Input panel
28
Using the On-screen keyboard
With the on-screen keyboard, you can key in text, symbols, numbers, or other special
characters when input is possible.
To input text using the on-screen keyboard:
1. In an application, tap the Input Panel arrow, then tap Keyboard.
2. Key in text by tapping keys on the on-screen keyboard.
Input panel
To enlarge the on-screen keyboard:
1. Tap the Input Panel arrow, then tap Option.
2. Select Keyboard from the Input Method list.
3. Tap Large Keys.
29
Using the Letter Recognizer
With the Letter Recognizer you can write individual letters, numbers, or special characters,
which are converted into typed text.
To use the Letter Recognizer:
1. In an application, tap the Input Panel arrow, then tap Letter Recognizer.
2. Write letters, numbers, symbols, or punctuations in the designated writing area.
• Write capital letters on the ABC (left) area of the box.
• Write lower case letters on the abc (middle) area of the box.
• Write numbers on the 123 (right) area of the box.
• Tap the special symbols button to key in symbols, punctuations and other special
characters.
• Tap Help “?” button for help on how to write characters.
Tap for special
characters
Input panel
30
Using the Transcriber
Transcriber is a handwriting recognition program that allows you to write in cursive, print, or
mixed styles. It reliably recognizes not only written text but also numbers and symbols. Make
sure to write legibly. See Help for more information on the Transcriber.
To use the Transcriber:
1. Start an application that accepts user input, such as Notes or Word Mobile.
2. Tap the Input Panel arrow, then tap Transcriber.
To write using Transcriber (using Notes):
1. Tap screen to position the cursor where you want the text to appear.
2. Use the stylus to write on the screen. The handwriting will be converted to text after you
lift the stylus from the screen.
To edit text:
1. Draw a line across the text you want to edit. After you lift the stylus from the screen, the
line will disappear and the selected text will be highlighted.
2. You can now rewrite the text or use the Transcriber gestures to edit your selected text.
See Help
for the Transcriber gestures.
Tap for Help
Input panel
31
Writing and drawing on the screen
You can write or draw directly on the screen and save notes in your own handwriting. If you
prefer to use your own handwriting or use drawings in your notes, set the default input mode to
Writing. If you prefer text, set the default mode to Typing.
To set the default input mode for Notes:
1. Tap Start > Programs > Notes.
2. From the Notes list, tap Menu > Options.
3. In the Default mode: box, tap the down arrow and select any of the following:
• Writing - if you want to draw or enter handwritten text in a note.
• Typing - if you want to create a typed note.
4. Set the other options according to your preference.
5. Tap
when finished.
To write a note:
1. Tap Start > Programs > Notes.
2. From the Notes list, tap New.
3. Write your text on the screen.
4. When finished, tap
32
to return to the Notes list.
Recording voice
At any time, whether your phone is on stand-by or active mode, you can record sound, voice,
or add a recording to a note while using your device.
To start a voice recording:
1. Press and hold Record button to launch voice recorder
application.
2. Tap the record icon to begin recording.
3. Place the receiver near your mouth or source of sound.
Record button
4. Tap the stop icon when finished recording. A recording
icon appears on the note.
5. Tap
.
To create a voice recording using Notes:
1. Tap Start > Programs > Notes.
2. From the Notes list, tap New.
3. If you do not see the recording toolbar, tap Menu >
View Recording Toolbar.
4. Tap the record icon to begin recording.
5. Place the receiver near your mouth or source of sound.
6. Tap the stop icon when finished recording. A recording
icon appears on the note.
7. Tap
.
33
To add a recording to a saved note:
1. Tap Start > Programs > Notes.
2. From the Notes list, tap to open a saved note.
3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar.
4. Tap the record icon to begin recording.
5. Place the receiver near your mouth or source of sound.
6. Tap the stop icon when finished recording. A recording icon appears on the note.
7. Tap
34
.
Using ActiveSync™
ActiveSync™ allows you to synchronize data in your device with data in your computer.
ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange
Server, provided that your cellular phone service or company is running Microsoft Exchange
Server with Exchange ActiveSync. When synchronized directly with Exchange Server, you can
stay up to date even when your PC is turned off.
During synchronization, ActiveSync compares the data in your device with the data in your
computer or Exchange Server, and updates all data with recent changes.
You can select and synchronize data in the following locations using ActiveSync:
• Contacts
• Calendar
• Email
• Tasks
• Notes
• Favorites
• Files
• Media
You can also exchange data between your computer and device without synchronizing.
ActiveSync is already installed in your device, but before you can synchronize data with
your computer, you must first install ActiveSync in your computer. Install ActiveSync from the
Microsoft Getting Started CD that came with your device package.
After you have installed ActiveSync, set up a sync relationship between your device and your
computer. ActiveSync recognizes your device and automatically transfers the synchronization
settings you have in your device.
35
If you wish to synchronize your device with Exchange Server through your company or service
provider, obtain the name of the Exchange Server, user name, password, and domain name
from your network administrator before starting the Sync Setup Wizard.
To install and configure ActiveSync in your computer:
1. Insert the Microsoft Getting Started CD that came with your device package.
2. Follow succeeding screen instructions.
3. After the setup is complete, the Sync Setup Wizard automatically starts when you
connect your device to your computer. Follow screen instructions to complete the wizard.
4. From the Sync Setup Wizard, you can:
• Configure an Exchange Server connection to synchronize directly with an Exchange Server. Acquire from your network administrator the required parameters for input.
• Create a synchronization relationship between your computer and your device.
5. Select the information type that you want to synchronize.
6.After you finish the wizard, ActiveSync automatically synchronizes your device. You can
disconnect the device after the synchronization is complete.
NOTE:
• When connected, your device is automatically synchronized with your computer. ActiveSync synchronizes everytime you make a change on either the device or computer.
• You cannot use WLAN to synchronize database.
• Refer to your Windows® Mobile Help, for more information about ActiveSync synchronization.
36
Synchronizing via mini-USB
You can connect to your device using the bundled mini-USB cable to synchronize to your
computer.
To synchronize your device via mini-USB:
1. After installing ActiveSync to your computer, connect the mini-USB plug to the mini-USB
connector at the bottom of the device.
2. Connect the other end of the USB cable to your computer. Upon connection, ActiveSync
automatically synchronizes your device.
37
Synchronizing via Bluetooth
You can connect your device to your computer using the Bluetooth wireless technology.
To synchronize your device via Bluetooth:
1. Configure Bluetooth in your computer to support ActiveSync. Refer to the ActiveSync
Help in your computer for instructions.
2. Turn on Bluetooth in your device. See “Using Bluetooth” section in Chapter 4 for details.
3. On your device, tap Start > Programs > ActiveSync.
4. From the ActiveSync screen, tap Menu > Connect via Bluetooth. Make sure your
device is within Bluetooth range with your computer.
If this is the first time you connect to this computer via Bluetooth, perform the Bluetooth
wizard in your device and setup a Bluetooth partnership between your device and
computer. Refer to Chapter 4 for Bluetooth wireless connection settings.
38
Synchronizing with Exchange Server
To synchronize your device with Exchange Server:
1. From the ActiveSync menu,
tap Menu > Add Server Source.
2. In the Server Address field, input
the address of the server running
Exchange Server then tap Next.
If necessary, tap the check box
This server requires an encrypted
(SSL) connection.
39
3. Input your name, password, and
domain then tap Next.
4. Tap the check boxes to select the data
items that you want to synchronize
with Exchange Server. To change the
available synchronization settings,
select a data item then tap Settings.
Tap Finish when done.
5. Start the sync process.
40
Setting the synchronization schedule
To set the synchronization with Exchange Server:
1. From the ActiveSync screen,
tap Menu > Schedule.
2. Refer to the table for input details.
Volume
Recommended setup
High
Select a shorter interval in the Peak times list.
Low
Select As items arrive option or a longer interval
in the Off-peak times list.
While roaming
Check Use above settings while roaming.
Sending messages
Check Send outgoing items immediately.
41
Searching information
Using the search tool, you can search for files and other items stored in your device or the
external MiniSD card. You can search by file name or by words located in various applications
including the Calendar, Contacts, Excel Mobile, Word Mobile, Outlook Mobile, Help, Messages,
Notes, and Tasks. You can also filter your search to files larger than 64 KB.
To search for a file or an item:
1. Tap Start > Programs > Search.
2. In Search for field, input the file name, word, or other information you want to search.
3. In Type field, select the data type to help you filter your search.
4. Tap Search. Found items are listed in Results.
5. In the Results list, tap the item with the information you need.
42
Getting Help
You can easily find Help for using any program on the device.
To get help for a program:
• From the Today screen or program, tap Start > Help.
A page will open with links to topics that explain how to use the program.
43
44
Chapter
Phone features
3
• Using the phone
• Making a call
• Receiving a call
45
Using the phone
Like a standard cellular phone, you can use your P735 to make and receive calls. You can also
keep a history of calls made and received, send SMS or MMS messages, take notes while
talking, call from Contacts, and copy data from installed SIM card to your device.
Phone pad
The phone pad allows you to easily dial and access the Contacts, Call History, Speed Dial,
Video Call, and Phone settings. To launch the Phone pad, do any of the following:
• Tap Start > Phone.
• Press the talk
button.
Using flight mode
Generally, you are required to turn off your cellular phone onboard an aircraft during takeoff and landing. Flight mode enables you to turn off the phone function but keep your device
turned on to use other functions.
To use flight mode:
1.Tap the signal icon
, or tap Start > Settings > Connections tab.
2.Tap Wireless Manager.
3.Tap Phone to turn on/off the phone connection.
46
Adjusting the device volume
To adjust the device volume:
1. Tap the speaker icon.
2. From the volume menu, you can:
•Adjust the phone volume or device volume by moving the slider to the desired volume level.
• Tap On, Vibrate, or Off to change the system and ringer volume settings.
You can also adjust the device volume by
pressing the volume controller keys at the left
side of the device.
Press to increase volume
Volume controller button
Press to decrease volume or
turn volume off.
47
Making a call
You can make a phone call using the phone pad. You can also make calls directly from the
Contacts, Call History, Speed Dial, or Voice Commander.
Using the phone pad
To make a call using the phone pad:
1. Tap Start > Phone.
2. From the phone screen, tap the number of
the party you want to call then tap
.
If you tapped the wrong number, tap the back
arrow to erase number to the left.
Back arrow
3. Talk to the called party when connected.
4. When finished, tap
to end the call.
You can also launch the phone pad by pressing the
Call key.
Call key
48
Talk button
Phone pad features
Operator name
Dialled numbers appear here
Press to delete number or symbol to the left
Press to set speed dial
Press to launch Call History
Numeric keypad
Press to make a video Call
Press to make call
Press to launch Contacts list
Press to launch menu
Displays the current call status
Press to mute
Press to launch Contacts list
Press to turn speaker ON/OFF
Press to hold call
Press to take notes
Press to end call
Press to launch numeric keypad
Press to launch menu
49
Making calls from Contacts
To make a call directly from Contacts:
1.Tap Start > Phone.
2.From the Phone pad, tap Contacts or press the Left soft key.
You can also launch Contacts from the Today screen by tapping Contacts on the menu
bar or pressing the Right soft key.
3. You can do any of the following to make a call:
• Tap to select a contact, then from the Contacts list, tap Call.
• Tap and hold the contact, and on the shortcut menu tap Call.
• Tap Enter a name or number then input the name or number you want to call from
Contacts. Tap Call or press the Left Soft Key to dial the selected item.
Making calls from Call History
To make a call from the call history:
1. Tap Start > Phone.
2. On the Phone pad, tap the Call History button.
3. Scroll to the desired contact or phone number,
then tap Call.
To look for more numbers in other categories,
tap Menu > Filter and tap a category.
You can also launch Call History from the Today
screen by pressing the Left Soft Key.
50
Call History
button
Using the Speed Dial
With Speed Dial you can call frequently dialled numbers in a single tap. For example, if you
assign a contact to the number 2 button in Speed Dial, you can simply tap
the Phone pad to dial the contact’s number.
and hold on
To create a Speed Dial entry:
1. Make sure that the entry you want to create is already in the Contacts list.
2. Tap Start > Phone.
2. On the Phone pad, tap the Speed Dial button.
3. Tap Menu > New.
4. Tap a contact from the list then tap Select.
5. In the Location box, select an available location for the new speed dial then tap OK.
To create a Speed Dial entry from Contacts:
1. From the Contacts list, tap and hold a contact name.
2. On the shortcut menu, tap Add to Speed Dial.
3. Select an available key for the new Speed Dial.
To delete a Speed Dial entry:
• In the Speed Dial list, tap and hold the desired entry then tap Delete.
51
Making and Receiving a Video call
Your device allows you to make calls with live images.
To make a video call:
• On the Phone keypad, tap
, or
• From Call History, tap and hold a contact
until a sub-menu appears, then tap Video
Call.
You can adjust the image on the screen by
tapping “Self to small/large” icon, and turn
on/off the camera by tapping the Camera
off/on icon on the screen.
Video call button
To receive or reject a video call:
• To answer the video call, tap Answer
• To reject the video call, tap Ignore, or press End key.
Note:
Due to the signal strength, the live images may appear on the screen several seconds after connected. The streaming
images quality may also be affected.
52
Using Voice Commander
To make a phone call using voice commander:
1. Press the record button found on the right side of your device.
Record button
2. From the following screen, your device
asks you to “Say command.”
3. Audibly say “Call” then the name to call
from your Contact list.
4. Say “Yes” or “No” after the confirmation
question.
If you said “Yes”, the voice commander
proceeds and dials the number;
otherwise, it returns to the voice
commander menu.
5.Say “Goodbye” or tap
commander.
to exit voice
NOTES:
• The Voice Command utility is supported in selected languages only.
• To use voice commander while using a headset, press the answer button* on the headset then follow given instructions. (* Answer button may not be available in some headset models.)
53
Receiving a call
When you receive a call, a message will appear giving you the
option to answer or reject the incoming call.
To answer or reject an incoming call:
• To answer a call tap Answer, or press Call key.
• To reject an incoming call, tap Ignore, or press End key.
TIP:
Press and hold Call key to switch receiver to speakerphone mode.
Call key
The following pop-up screen appears during an incoming call:
• Tap Answer to receive call or
• Tap Ignore to dismiss call.
To terminate a call:
• Tap End or press End key to terminate an incoming or outgoing call.
54
End key
Chapter
Wireless features
4
• Using the Wireless Manager
• Using Bluetooth®
• Using WLAN (IEEE 802.11b/g)
• Setting a 3G/GPRS connection
55
Using the Wireless Manager
The Wireless Manager allows you to turn the power off or on to your wireless connections in a
single location. This is a quick way to preserve battery power or to prepare your device for an
airplane flight.
To use the Wireless Manager:
1.Tap Start > Settings > Connections tab.
2.Tap Wireless Manager.
3.From the Wireless Manager screen, do any of the following:
•Tap the button for a desired wireless connection type to turn it on or off. If it is already
turned off, the button is a lighter color and displays an icon marked with an X.
•Tap
to turn all wireless connections on or off.
•Tap Menu to change settings for one of the displayed wireless connection types.
Tap to turn all wireless
connections on or off
Tap to turn WLAN (IEEE 802.11b/g)
connection on or off
Tap to turn Bluetooth®
connection on or off
Tap to turn Phone connection on or off
Tap to exit Wireless Manager
4.Tap Done or
56
to exit Wireless Manager.
Tap to change settings
Using Bluetooth®
Overview
Bluetooth® is a short-range wireless communications technology that allows devices with
Bluetooth capabilities to exchange data within a radius of about 10 meters (30 feet) without
requring a physical connection. With Bluetooth enabled in your device, you can:
• Connect and communicate (i.e. beam files, tasks, contacts) with other devices with
Bluetooth features.
• Use Bluetooth service. After you connect to another device or computer using
Bluetooth, you can use the services available on that device.
Activating Bluetooth in your device
To activate (turn ON) Bluetooth in your device:
1. Tap Start > Settings > Connections tab then tap the Bluetooth icon.
2. From the Bluetooth screen, tap General tab.
3. Tap Turn on button. The Bluetooth status is displayed above the Turn on/Turn off
buttons.
You can also turn Bluetooth on or off from the Today screen or using the Wireless Manager.
To turn Bluetooth on or off from the Today screen:
1. Find the Bluetooth icon
2. Tap
at the botton right corner of the Today screen.
to display shortcut menu then tap Turn Bluetooth ON.
The Bluetooth icon changes to
if Bluetooth is turned Off.
Refer to the previous page to turn Bluetooth on or off using the Wireless Manager.
NOTES:
When not in use, deactivate Bluetooth in your device to conserve battery power.
57
Configuring Bluetooth
To configure Bluetooth in your device:
1. Start > Settings > Connections tab then tap the Bluetooth icon.
2. From the Bluetooth screen, you can access the following tabs:
• General - allows you to set the user profile, turn Bluetooth on or off, displays the
Bluetooth status, and provides a link to the Bluetooth Manager.
• Accessibility - allows you to set the device name, see the Bluetooth Device Address,
select remote device you want to connect, and set whether to allow remote devices to detect your device.
• Services - enable or disable available Bluetooth services, require authorization, set authentication passkey, and set to require encryption. You can also access advanced settings from this tab.
The available service settings are enabled when you select a Bluetooth service. Select a
service from the list to establish its settings.
Bluetooth Service
58
Description
File Transfer
Set the highest level directory on your device that remote devices can
access.
Information Exchange
Sets the default business card.
Serial Port
Displays the port addresses. This cannot be changed.
Personal Network Server
Allows you to customise the service settings for your personal network
server.
Dial-up Networking Server
Allows you to enable or authenticate, or both, the connections to the
dial-up network server.
Audio Gateway
Enable the stereo Bluetooth headset.
NOTES:
The Bluetooth device setup instructions provided in this section may differ with other Bluetooth devices. If the
instructions in this guide differs from the documentation that came with your Bluetooth-enabled device, follow the latter.
Using a Bluetooth-enabled headset
Mono headset setup
1. Make sure that Bluetooth is enabled
on your device.
2. Tap
on the Today screen then on
the shortcut menu tap Bluetooth
Manager.
3. From the Bluetooth Manager, tap New.
4. From the Bluetooth Connection Wizard,
tap Hands-free/Headset setup then tap
Next.
59
5. Make sure that your headset device is
in pairing mode and ready to receive
incoming connection requests then tap
Next.
6. Tap the name of your Bluetoothenabled headset device then tap Next.
7. In Passkey, input the alphanumeric
passkey of your headset device
then tap
. You can find this in the
documentation that came with your
headset device.
8. Tap Finish. You are now ready to use
your headset device.
NOTES:
If the connection between the device and a Bluetooth headset fails, tap the device icon then choose
“Re-connection”, you do not have to pair the devices again
60
Stereo headset setup
P735 supports A2DP (Advanced Audio Distribution Profile), which is used by Bluetooth-enabled
stereo headsets. Make sure that your stereo headset also supports A2DP.
1. Tap
on the Today screen then
on the shortcut menu tap Bluetooth
Manager.
2. From the Bluetooth manager screen,
tap New then select High Quality
Audio Setup.
3. Make sure that your stereo headset
device is in pairing mode and ready to
receive incoming connection requests
then tap Next.
4.Tap the name of your stereo headset
device then tap Next.
• If you want to create a shortcut, tap
the check box Create a shortcut
for this connection then input a
connection name.
• If you want to use a secure
connections, tap the check box
to Use a secure, encrypted
connection.
61
5. Tap Finish to initiate connection.
NOTES:
• To answer a phone call using your stereo
headset, make sure that you have mono and
stereo connection at the same time.
•To use voice commander while using a headset,
press the answer button* on the headset then
follow succeeding voice instructions. (*Answer
button may not be supported in some headset
models.)
62
Using WLAN (IEEE 802.11b/g)
Introduction
WLAN (IEEE 802.11b/g), refers to certain types of wireless local area network (WLAN) that
use specifications in the 802.11 family.
Activating WLAN in your device
To activate WLAN in your device:
1. Tap Start > Settings > Connections tab then tap the Wi-Fi Manager icon.
2. From the Wi-Fi Manager screen, tap Menu then Turn Wi-Fi On.
You can also turn Wi-Fi on or off from the Today screen or using the Wireless Manager:
1. Tap the Wi-Fi icon
or
or
on the status bar.
2. From the pop-up callout, tap Turn on Wi-Fi.
Refer to page 55 to turn WLAN on or off using the Wireless Manager.
NOTE:
• When WLAN is used simultaneously with the GPRS, the latter will get signal priority. We recommend not to use
WLAN and GPRS at the same time.
•We recommend not to use WLAN and the Bluetooth function at the same time. It may cause disturbance in data transmission since both use the same wireless channel.
•The WLAN and USB connections cannot be used at the same time.
• When the battery power is less than 20% the device prompts a warning message whether to continue using WiFi or
not. Tap “Yes” to continue using or “No” to disconnect. We recommend that you plug the power adapter immediately to avoid losing data.
63
Configuring WLAN
To configure WLAN in your device:
1. Start > Settings > Connections tab then tap the Wi-Fi Manager icon.
2. From the Wi-Fi Manager screen, you can access the following tabs:
• Wi-Fi Status
• Setting
• IP Info
• Site Survey
NOTE:
Tap ? for Wi-Fi Help.
Wi-Fi Status
Setting
Displays the Wi-Fi status, ESSID, BSSID,
BSS mode, channel, data rate,
IP Address, and signal strength.
Allows you to set the Adhoc channel,
preamble, data rate, enable or
disable power save feature, set power
strength, and enable or disable auto
power off feature.
NOTE:
The Power Save
feature reduces data
transmission rate but
improves the battery life.
64
IP Info
Site Survey
Displays the network information and
allows you to renew or ping a network connection.
Shows the available wireless networks
in the area.
65
Setting a 3G/GPRS connection
Your P735 allows you to connect via 3G and General Packet Radio Service (GPRS). They
supports a wide range of bandwidths that allows sending and receiving small bursts of data,
such as email and web browsing. To set a 3G/GPRS connection in your device:
1. From the Today screen, tap
on the status bar.
or
2. From the pop-up callout, tap Settings.
Pop-up callout
3. From the Settings screen, select
the Connections tab then tap
Connections icon.
66
4. From the Connections screen, tap Add
a new model connection.
5. Input a unique name for the connection
then select Cellular Line (GPRS) from
the modem list.
67
6. Input the Access point name.
7. Input your user name, password, and
domain then tap Finish. Contact your
network administrator for assistance.
NOTE:
The GPRS and USB connections can not be used at the same time.
68
Connecting 3G/GPRS
To connect 3G/GPRS:
1. Tap Start > Settings > Connections
tab then tap Connections icon.
2. From the Connections screen, tap
Manage existing connections.
3. Tap and hold on an existing connection
then from the pop-up menu tap
Connect.
Tap Delete if you want to delete
selected connection setting.
4.When connected, tap
to exit.
NOTE:
• When WLAN is used simultaneously with
the 3G/GPRS, the latter will get signal priority. We recommend not to use WLAN and GPRS at the same time.
69
If you have set a default 3G/GPRS connection, it automatically connects when you launch an
application that connects to the Internet.
1. Launch any application that connects
to the Internet (e.g. Internet Explorer).
The device will automatically connect
your default 3G/GPRS connection. A
pop-up callout appears to display the
connection status.
2.When connected, you can start
browsing the Internet. If you are using
Internet Explorer, the default site will
be displayed.
Disconnecting 3G/GPRS
To disconnect 3G/GPRS:
1. Tap
or
from the status bar.
2. From the pop-up callout, tap
Disconnect.
3. Tap
70
to exit.
NOTE:
• If your ActiveSync is set to sync with Exchange
Server automatically, synchronization will occur
after you connect again.
• 3G/GPRS will automatically reconnect everytime
you launch an application that requires 3G/
GPRS connection (e.g., Internet Explorer or Pocket MSN).
Pop-up callout
Using the Network Setting Tool
The Network Setting Tool allows you to conveniently select and connect to your 3G/GPRS
service provider.
To connect via Network Setting:
1. Tap Start > Settings > Connections
tab then tap the Network Setting icon.
or
on the
You can also tap
status bar then tap Settings from the
pop-up callout.
2.From the Network Setting screen,
select your service providers from the
list.
NOTE:
• Operators vary in different regions.
• The 3G/GPRS and USB connections cannot be used at the same time.
71
72
Chapter
My Secrets
5
• Using My Secrets
73
Using My Secrets
My Secrets is a secret archive to keep your classified documents, pictures and video. The
items placed in the My Secrets folder are encrypted for protection. A user-defined password is
required to unlock the folder or change the settings.
Enabling My Secrets
To enable My Secrets using Express Mode (recommended):
1. Tap Start > Programs then tap My Secrets icon.
2. Tap Express Mode (Recommended)
then tap Next.
74
3. Key in a 4-digit password.
4. When prompted, key in the same
password again to confirm.
5. Tap Finish.
When finished, the
My Documents\My Secrets becomes
an encrypted folder. You can now start
using this folder.
IMPORTANT:
• When locked, the My Secrets folder is hidden. Use
password to unlock folder and access files.
• You can tap the My Secrets icon on the Today screen to lock, unlock, and configure My Secrets.
See next page for details.
75
Unlocking My Secrets
To unlock My Secrets:
1. Tap the My Secrets
Today screen.
icon on the
2. From the shortcut menu, tap Unlock.
3. Key in correct password.
You can now use My Secrets folder.
76
Locking My Secrets
To lock My Secrets:
1. Tap the My Secrets
Today screen.
icon on the
2. From the shortcut menu, tap Lock.
The My Secrets icon changes to
indicating that the My Secrets folder is
locked.
77
My Secrets setting
To modify the My Secrets settings:
1. Tap the My Secrets
Today screen.
icon on the
2. From the shortcut menu, tap My
Secrets Setting.
3. Key in correct password.
My Secrets Setting allows you to
modify any of the following:
• Security setting
• Password
• Password Hint
78
Security Setting
Security setting allows you to enable
or disable autolock when the device
enters sleep mode, lock the device
now, or stop security.
Password
The Password tab allows you to
change the password and password
type.
79
Hint
Set a hint in case you forget your
password.
• Tap check box to enable or disable
use of hint to unlock the device.
• Select one of the predefined
questions then key in answer.
4. Tap
80
when finished.
Disabling My Secrets
To disable My Secrets:
1. From Today screen, tap Start >
Programs > My Secrets or
Tap the My Secrets
icon on the
Today screen and from the shortcut
menu, tap My Secrets Setting.
2. Key in correct password.
Select Security Setting tab, then tap
Stop Security.
81
3. When prompted, tap Yes to confirm.
4. Tap Next to stop all running programs.
82
5. Tap Next to start decrypting files in My
Secrets folder.
6. Tap Done when finished.
83
84
Chapter
Multimedia features
6
• Using the camera
• Viewing pictures and video
85
Using the camera
The built-in two-megapixel camera allows you to take photos and record audio/video clips.
Launching the camera
To start using the camera:
• Tap Start > Programs > Pictures and Videos > Camera icon or
• Press the Camera button on the left side of your device.
Camera/shutter button
Camera button
NOTE:
• By default, the preview screen is set to landscape.
• After launching the camera, your device is set to camera mode by default.
• In camera mode, the camera button function as shutter button.
To exit the Camera:
86
• Tap the exit
icon on the camera screen.
Navigation button functions in camera mode
The following describes the navigation button functions in Camera mode:
Up
ENTER/ACTION Button
Backward
Forward
Down
Up
In camera preview mode, press for video mode.
In the camera or video option menu, press to select menu items.
Down
In video preview mode, press for camera mode.
In the video or camera options menu, press to select menu items.
Backward
In camera mode and if the resolution is not 1600x1200, press to
zoom in.
Forward
In camera mode and if the resolution is not 1600x1200, press to
zoom out.
Enter/Action button
Press to take picture or start/stop recording video.
Press to execute a selected menu item or to display more menu
items.
87
Available capture modes
Your device camera can be set to two capture modes:
• Camera mode - Camera mode allows you to take photos, and save them to your device
or MiniSD. You can also configure the camera to match an environment, set picture size,
select magnification, adjust the picture quality, apply effects, and modify other advanced
settings.
• Video mode - Video mode enables you to record audio/video clips. Like in camera
mode, it also allows you to select the magnification, set the video size, enable macro
mode, apply some effects, select target storage, and modify advanced video settings.
Supported formats
Using the camera mode or video mode, the images or video clip captured are stored in the
following formats:
• Still image (Camera mode) - JPEG (.jpg)
• Video (Video mode) - 3GP (.3gp), MPEG-4 (.mp4)
88
Camera mode screen
The following describes the screen icons in Camera mode:
Capture mode icon
Picture quality icon
Flash light status
Macro mode status
Default storage icon
Scene mode icon
Timer icon
Burst mode status
Effects icon
Picture resolution
Tap to close camera
Tap to launch Pictures
and Videos
Number of
available shots
Tap to zoom in
Capture modes:
Camera mode
Video mode
Tap to zoom out
Tap to launch
camera menu
89
Camera mode icons
• Capture mode icon [
/
] - indicates the current capture mode.
• Picture quality icon [
/
/
• Flash light status icon [
• Macro mode icon [
/
]- indicates the picture quality used.
/
] - indicates the camera flash status.
] - this icon appears when the camera is in macro mode.
• Default storage icon [
videos clips.
• Scene mode icon [
/
/
] - indicates default storage for captured images and
/
] - indicates the scene mode used.
/
] - when the camera timer is enabled (5 seconds or 10 seconds), the
• Timer icon [
corresponding timer icon appears. When you press the shutter button or the navigation
button to take a picture, the count down begins and picture is taken after the time set.
• Burst mode icon [
/
• Effects icon [
/
/
] - indicates the number of frames in burst mode.
] - indicates the effects used.
• Picture resolution [
/
/
/
/
/
] - shows the resolution used.
When set to 1600x1200 resolution, the zoom in/zoom out function is disabled.
• Exit icon [
] - tap to exit camera.
• Zoom In [
] - tap to zoom in view of subject on screen.
• Zoom Out [
] - tap to zoom out view of subject on screen.
• Thumbnails [
your images in thumbnails.
• Menu [
• Delete [
90
]- tap to launch Pictures and Video application and preview
] - tap to launch camera menu options.
] - tap to delete picture.
Camera options menu
The camera options menu allows you to change various camera and picture settings.
To launch options menu:
1. Tap Menu from the camera screen.
2. From the shortcut menu, tap an icon to
display contents.
Camera options
shortcut menu
91
Change Mode
The Change Mode option allows you to set
capture mode into Camera or Video mode.
Scene
The Scene option allows you to select
presets appropriate for a night scene or
sports event. Select Auto to use best setting
for any scene.
Picture Size
Allows you to set the frame size of picture.
92
Picture Quality
This option provides three picture quality
presets: Normal, Fine, and Super Fine. The
picture quality is set to Super Fine by default.
Flash Mode
This option allows you to change the flash
mode to suit a variety of lighting situations.
Macro Mode
Enables or disables the macro photography
feature.
93
Zoom
Allows you to change the maximum
magnification allowed.
Self-Timer
Sets the delay of shutter release to 5 or 10
seconds after you have pressed the
camera/shutter button.
Burst
Allows you to take 4 or 9 pictures in
succession with one press of the camera/
shutter button.
94
Frame
Allows you to set a frame. This feature is
only available when the resolution is set to
320x240.
Effect
The Effect option allows you to apply some
effects to the subject. Select from the
following configuration options: Black-White,
Negative, and Sepia. Set to Normal for no
effect.
Save to
Allows you to select the default storage for
captured pictures.
NOTE:
Prepare a MiniSD card before setting default storage
to Storage Card.
95
Advanced
This option allows you to set the following:
- Filename prefix format
- Filename prefix
- File number
- Date and time stamp
- Shutter sound
- Burst interval
96
Taking photos
After launching the camera, your device is set to Camera mode by default. If set otherwise,
tap Menu > Change Mode > Camera Mode then tap Done.
You can also set to camera mode by tapping the camera mode icon on the screen.
To take a photo:
1. Aim device to your subject then
half-press camera/shutter button to
auto-focus on subject.
While camera/shutter button is
half-pressed, you can see the
auto-focus frame on the center of the
screen. The frame turns green indicating
the auto-focus is finished.
Camera mode icon
IMPORTANT:
The auto-focus range is effective only from 8~80 cm,
if you want to skip this feature, press the navigation
button action button to take a picture.
Auto-focus frame
2.Full-press the camera/shutter button or press the navigation button action button to
capture image.
When the
icon appears, make sure the device is stable and not shaking.
3.Repeat steps 1 to 2 to take more photos.
NOTE:
The image is automatically saved to the default storage location and can be viewed using the Pictures and Videos
application.
97
Video mode screen
The following describes the screen icons in Video mode:
Capture mode icon
Remaining video
recording time
Default storage icon
Video resolution
Tap to close camera
Tap to launch Pictures
and Videos
Recording indicator
Green: Ready
Red: Recording
Tap to zoom in
Capture mode icons:
Camera mode
Video mode
Tap to zoom out
Tap to launch
video menu
98
Video mode icons
• Capture mode icon [
/
] - indicates the current capture mode.
• Flash light status icon [
• Macro mode icon [
] - this icon appears when the flash light is enabled.
] - this icon appears when the video is in macro mode.
• Default storage icon [
/
• Effects icon [
] - indicates the effects used.
/
• Picture resolution [
/
/
] - indicates default storage for captured video clips.
/
] - shows the resolution used.
• Exit icon [
] - tap to exit video.
• Zoom In [
] - tap to zoom in view of subject on screen.
• Zoom Out [
] - tap to zoom out view of subject on screen.
• Thumbnails [
your video.
• Menu [
• Delete [
]- tap to launch Pictures and Video application and play
] - tap to launch video menu options.
] - tap to delete video.
99
Video options menu
The video options menu allows you to change various video and playback settings.
To launch video options menu:
1. Tap Menu from the video screen.
2. From the shortcut menu, tap an icon to
display contents.
Video options
shortcut menu
100
Change Mode
The Change Mode option allows you to set
your device into Camera or Video capture
mode.
Zoom
Allows you to change the maximum
magnification allowed.
Video Size
Allows you to set the frame size of video.
101
Flash Mode
This option allows you to change the flash
mode to suit a variety of lighting situations.
Macro Mode
Enables or disables the macro photography
feature.
Save to
Allows you to select the default storage
location for recorded video.
NOTE:
Prepare a MiniSD card before setting default storage
to Storage Card.
102
Effect
The Effect option allows you to apply some
effects to the subject. Select from the
following configuration options: Black-White,
Negative, and Sepia. Set to Normal for no
effect.
Advanced
Tap to display
more options
This option allows you to set the following:
- Video filetype
- Filename prefix format
- Filename prefix
- File number
- Enable or disable audio when recording
103
Recording videos
Set the device to video capture mode to record videos.
To set video mode:
• Tap Menu > Change Mode > Video Mode
then tap Done.
• You can also set the video mode by tapping
the video mode icon on the screen as shown.
Video mode icon
To record video:
1. Aim device to your subject then
half-press camera/shutter button to
auto-focus on subject.
While camera/shutter button is
half-pressed, the auto-focus frame
appears on the center of the screen.
IMPORTANT:
The auto-focus range is effective only from 8~80
cm, if you want to skip this feature, press the
navigation button action button to record a video.
Auto-focus frame
104
2.Full-press the camera/shutter button
or press the navigation button action
button to begin recording.
The record indicator turns from green
to red while video is recording.
3. Full-press the camera/shutter button
or press the navigation button action
button again to stop recording.
Record indicator
4.Repeat steps 1 to 3 to record another video.
NOTE:
•The video clip is automatically saved to the default storage location.
•Use Windows Media Player Mobile to playback video clip in your device.
• Use Apple® QuickTime™ player, if you wish to play video clips in your computer. You can download QuickTime™
installer from www.apple.com/quicktime.
105
Viewing pictures and video
Use the Pictures and Video Application to preview stored images and playback video clips.
Viewing pictures and video
To view pictures and video:
1. Tap Start > Programs > Pictures and Videos.
2. Tap the picture or video clip you want to see.
• To view pictures or launch video clips stored in MiniSD card, tap the folder list (labeled My Pictures), and tap MiniSD Card.
• To view pictures stored in My Pictures folder on your device, tap My Pictures then tap picture thumbnail.
• To playback video clips in My Videos folder on your device, tap My Videos then tap video thumbnail.
106
Chapter
Other features
• Biz Card Recognition
• Meeting Time Planner
• Clean Reset
• Internet Share
• Flashlight
• Remote Presenter
• Setting ring tone
• Wake-up setting
7
• Mode switcher
• System information
• Restoring factory default settings
107
Biz Card Recognition
Biz Card Recognition is a character recognition utility that scans and analyzes the appearance
of character details on a taken picture of a business card. It then subsequently identifies and
categorizes the information then converts them to editable text on your Contact list.
Using the Biz Card Recognition
To process a business card using Biz Card Recognition:
1.Tap Start > Programs > Biz Card Recognition.
2.Tap Enter button to launch camera.
Refer below for other features of the Biz Card Recognition main screen.
Tap to start
Tap for help
Tap to change the user
interface (UI) language
Tap to exit
Tap to display About screen
108
IMPORTANT:
• Make sure to clean the camera lens and provide enough lighting before taking a picture of business card.
• Keep a “1600x1200” resolution when taking a picture of business card.
3.Take a clear picture of the business
card.
4.If the picture is clear enough for
processing, tap
to return
to WorldCard menu; otherwise, tap
.
5.If necessary, select the Language used
or Region appropriate for the business
card. You can also adjust the picture
orientation.
6.Tap Recognize.
109
7.Tap Export to save the information in Contacts. Refer below for other screen options
and features.
Tap to change
Category
Tap the check box to
include or exclude data field
Tap the corresponding arrow
to change data field
Tap to add a data field
Tap to change
input method
Tap to save information to Contacts
Tap to pan through the image
8. Tap
110
to exit Biz Card Recognition.
Meeting Time Planner
Meeting Time Planner allows you to find a suitable time to have a video conference, telephone
or net meeting with participants in different time zones.
Using the Meeting Time Planner
To use the Meeting Time Planner:
1.Tap Start > Programs > Meeting Time Planner.
2.Select the date and the cities.
A color coded 24 hours time table of the chosen
cities appears, allowing you to identify the best time
for the meeting. Dark blue is late night/early morning,
light blue is off-peak hour, and white is peak daytime
hour. You can also change the interval of time shown
on the time by tapping Interval right down the
screen.
3. Select the time for your meeting time and tap New
Date.
4. Fill in the meeting information and tap OK to add
your date into Calendar.
NOTE:
You can tap Interval > Summer Time use daylight saving time.
111
Clean Reset
Clean Reset allows you to delet all data and restore the default factory settings.
To perform a Clean Reset:
1.Press and hold the up button while simultaneously
pressing the stylus on the reset switch.
2.A warning message appears. Press
to do clean
reset, or press
to leave the operation screen.
112
Internet Sharing
With Internet Sharing, your computer can use the device as a modem for connecting to the
Internet.
To use the Internet Sharing:
1.Connect your device to the computer using Bluetooth or a USB cable.
2.Tap Start > Programs > Internet Sharing.
3.Select the PC connection type.
4. Select the network connection your device should use to connect to the Internet.
5. Tap Connect.
NOTE:
• If you want to use USB as PC connection, install Microsoft ActiveSync 4.2 or later version on your PC before using the Internet Sharing.
• If you want to use Bluetooth as PC connection,initiate and complete the Bluetooth Personal Area Network (PAN) partnership on your PC before using the Internet Sharing.
113
Flashlight
The integrated flashlight allows you to use your device as a torch in the dark.
To use the flashlight:
1.Press and hold the mode switcher button to turn on the flashlight.
2.A torch icon
appears on the today screen. Tab
switcher button again to turn off the flashlight.
or press and hold the mode
Re
se
t
Press and hold the mode switcher button to
turn on the flashlight.
114
Tab to turn off the flashlight.
Remote Presenter
From your P735 device, Remote Presenter allows you to remotely control PowerPoint™
presentations running on your desktop or notebook. Operating over a Bluetooth wireless
connection, it promotes convenience and freedom of movement during your presentation. It
also enables you to review slide notes without affecting the audience’s view of the slide show.
Using the Remote Presenter
IMPORTANT:
• Before you start, make sure to install the Remote Presenter utility on your computer. You can find the installation files
in the bundled support CD.
•Remote Presenter works with Bluetooth-enabled computers only.
To use the Remote Presenter:
1.Tap Start > Programs > Remote Presenter.
2.Do the following before searching for
Bluetooth devices:
•Activate Bluetooth in your computer.
•Launch the Remote Presenter program in
your computer.
When done, tap Next.
115
The following describes the Remote Presenter menu on your computer screen.
PowerPoint .ppt file path
Tap to change path
Tap to start or stop
Bluetooth COM port
3.From the list of Bluetooth devices found,
select the name of computer containing your
PowerPoint presentation then tap Next.
116
Tap to exit
4.When requested, key in the
authentication passkey on your
computer and your P735.
NOTE: The Bluetooth authentication passkey is only
required if a paired relationship is not yet established with
the other device.
5.From the Remote Controller menu on your
computer, click
to establish a
connection.
Tap
to exit reminder.
6.When the connection is established, tap
Connect.
117
7.Your device prompts if the connection is
successful or not. Repeat from step 1, if the
connection failed.
8.Tap the name of PowerPoint (.ppt) file to
show then tap Select.
118
Upon selection, Microsoft® PowerPoint is automatically launched on your computer with the
selected file open.
119
9.You can now remotely control the PowerPoint presentation on your computer using your
device. The following describes the control menu on your device.
Slide number
Tap to exit
Tap to select slide
Indicates Bluetooth® signal
Timer
Tap to toggle between Normal and
Slide Show view
Previous slide
Next slide
Tap to display notes
Tap to display menu options
Tap to return to control panel
Notes panel
120
Setting ring tone
With P735 you can add and configure your favorite music as your phone ring tone. You can
easily configure your favorite song or sound as your ring tone with the following compatible
audio formats: aac/acc+, amr, .mp3, .wav, .wma, and .mid.
Adding ring tone to selection
To add ring tone to the selection category under phone setting:
1. Tap Start > Settings > Personal > Ring tones icon.
2. Select a specific file extension from the list box.
3. Tap to check a ring tone file that you want to add.
Tap
to try ring tone sound and tap
to stop.
121
Changing the ring tone
To change the ring tone:
1. Tap Start > Settings > Personal > Phone icon.
2. Select a ring tone from the Ring tone list box. The songs or sounds that you added as
ring tone appears on this list along with the default ring tones that came with the device.
Tap
3. Tap
122
to try ring tone sound and tap
when finished.
to stop.
Wake-up setting
You can set the wake-up actions whenever your device is in sleep mode.
To set the wake-up action:
1. Tap Start > Settings > Personal > Wakeup source icon.
2. Select from the available wake-up actions.
Tap Select All to select all actions or tap Select None to deselect all available actions.
3. Tap
when finished.
123
Mode switcher
Mode switcher allows you to easily switch between applications and tasks.
To use the mode switcher, press the mode switcher button on your device keypad. Press again
to shift between applications.
You can also use the mode switcher button to turn the flash light on or off. Press and hold the
mode switcher button to use this feature.
Mode switcher pop-up menu
Mode switcher button
You can configure the mode switcher and define the switcher type or select items to appear in
the mode switcher pop-up menu.
To define the switcher type:
1. Tap Start > Settings > System > Mode Switcher icon.
2. Select the Switcher type.
3. Tap and drag the handle bar to set the switch Waiting Time.
To select items to appear in the switcher pop-up menu:
1. Tap Start > Settings > System > Mode Switcher icon.
2. Tap the Items tab.
124
3. Select the items by tapping the check boxes.
System information
The System Information contains important device information including the current device
settings and version.
To launch the System Information:
1. Tap Start > Settings > System > System Information icon.
2. Tap the Device Info tab for device hardware information.
3. Tap Version tab to display the ROM, Boot, Radio, MP and Battery version.
Device Info
Version
125
Restoring default factory settings
This option allows you to restore the default factory settings.
To restore default settings:
1. Tap Start > Settings > System tab > Default Settings.
2. Input ‘1234’ in the Password field to confirm that you want to restore to default settings.
3. Tap Ok.
You can also restore the factory settings by pressing the UP button of the navigation key and
the reset button at the same time.
WARNING:
This option will delete all files stored in this device.
126
127
Chapter
8
Device components status
• ASUS Status icon
128
ASUS status icon
The ASUS status icon allows you to easily check and see the current status of the following
device components: CPU, USB, LCD Brightness, Battery power, Memory, MiniSD card, and
storage.
To check the status of these components, tap the ASUS Status icon
on the Today screen.
CPU: Allows you to set the CPU mode. Set to
Automatic Mode to automatically change the CPU
speed according to the CPU loading.
USB: Allows you to set the USB connection mode.
Brightness: Tap to adjust the LCD brightness on
battery power or external power.
Power: Displays the remaining battery power and
allows you to set advanced power saving features.
Memory: Displays the total, currently used, and
remaining memory available.
Storage memory: Displays the total, used, and
remaining storage card memory.
Storage card: Tap to display the contents of the
storage card installed.
Settings: Allows you to select the items to display in
this ASUS Status pop-up menu.
129
CPU mode setting
Allows you to select the CPU mode (Turbo,
Standard, Power Saving). Tap to check
Automatic Mode to automatically change the
CPU speed according to the CPU loading.
USB setting
Allows you to set the USB connection mode.
•ActiveSync (high speed) - allows a high speed serial connection between your device and PC. Select this when using ActiveSync.
•ActiveSync (low speed) - allows a low speed serial connection between your device and PC. Select this when using ActiveSync.
•Mass storage device (card reader) - turns your device into a mass storage unit similar to a card reader.
130
LCD Brightness
Adjusts the LCD brightness on battery power
and external power.
Power
Displays the battery power status.
The Advanced settings allows you to set a
time when to turn-off the device if not used.
131
Memory
Displays the total, in use and free memory.
Storage card memory
Displays the total, in use, and available
storage card memory.
132
Programs running in memory
Allows you to activate or stop any program
running on memory.
IMPORTANT:
When you exit a running program, you are actually
only minimizing it and the program remains in the
memory. You can stop these programs from running
in the background using this option.
ASUS States Settings
Allows you to select the items to display in
the ASUS Settings pop-up menu.
133
134
Appendix
• RF Exposure Information (SAR)
• Notices
• Contact information
135
RF Exposure Information (SAR)
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits
for exposure to radio waves recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and include safety margins
designed to assure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR.
The ICNIRP SAR limit for mobiles devices used by the general public is 2 W/kg and the
highest SAR value for this device when tested at the ear was 0.712 W/kg*. As mobile devices
offer a range of functions, they can be used in other positions, such as on the body as
described in this user guide. In this case, the highest tested SAR value is 0.848 W/kg*.
As SAR is measured utilizing the devices highest transmitting power, the actual SAR of
this device while operating is typically below that indicated above. This is due to automatic
changes to the power level of the device to ensure it only uses the minimum level required to
reach the network.
While there may be differences between the SAR levels of various phones and at various
positions, they all meet the governmental requirements for safe exposure. Please note
that improvements to this product model could cause differences in the SAR value for later
products; in all cases, products are designed to be within the guidelines.
The World Health Organization has stated that present scientific information does not indicate
the need for any special precautions for the use of mobile devices. They note that if you
want to reduce your exposure then you can do so by limiting the length of calls or using a
‘handsfree’ device to keep the mobile phone away from the head and body.
136
Additional Information can be found on the websites of the World Health Organization
(http://www.who.int/emf).
* The tests are carried out in accordance with international guidelines for testing. The limit incorporates a substantial margin for safety to give additional protection for the public and to account for any variations in measurements. Additional related information includes the ASUS testing protocol, assessment procedure, and measurement uncertainty range for this product.
137
Notices
Replaceable batteries
If an equipment is provided with a replaceable battery and if replacement by an
incorrect type could result in an explosion (e.g. with some lithium batteries), the
following applies:
– if the battery is placed in an OPERATOR ACCESS AREA, there shall be a
marking close to the battery or a statement in both the operating and the
servicing instructions;
– if the battery is placed elsewhere in the equipment, there shall be a marking
close to the battery or a statement in the servicing instructions.
The marking or statement shall include the following or similar text:
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
THE INSTRUCTIONS
138
Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either
all other compartments within that area containing a hazard shall be inaccessible
to the OPERATOR by the use of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
An acceptable marking for an electric shock hazard is (ISO 3864, No. 5036).
Equipment for restricted access locations
For equipment intended only for installation in a RESTRICTED ACCESS
LOCATION, the installation instructions shall contain a statement to this effect.
139
WARNING
The user needs to switch off the device when exposed to areas with potentially
explosive atmospheres such as petrol stations, chemical storage depots and
blasting operations.
140
ASUS
Address: 15 Li-Te Road, Peitou, Taipei, Taiwan
Tel: 886-2-2894-3447; Fax: 886-2-2890-7698
Declaration
We declare that the IMEI codes for this product, P735, are unique to each unit
and only assigned to this model. The IMEI of each unit is factory set and cannot
be altered by the user and that it complies with the relevant IMEI integrity related
requirements expressed in the GSM standards.
Should you have any questions or comments regarding this matter, please have our
best attention.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886-2-2894-3447
Fax: 886-2-2890-7698
E-mail: http://vip.asus.com/eservice/techserv.aspx
141
Contact information
ASUSTeK COMPUTER INC. (Taiwan)
Hotline: 0800-093-456 (Toll-Free call from Taiwan only)
Fax:
886-2-2895-9254
E-mail: http://vip.asus.com/eservice/techserv.aspx
WWW: http://tw.asus.com
ASUSTeK COMPUTER INC. (Asia-Pacific)
Hotline: 886-2-2894-3447
Fax:
886-2-2890-7698
E-mail: http://vip.asus.com/eservice/techserv.aspx
WWW: http://www.asus.com
ASUS COMPUTER GmbH (Germany/Austria)
Hotline: +49-2102-9599-10
Fax:
+49-2102-9599-11
E-mail: http://www.asus.de/support/support.htm
WWW: http://www.asus.de
ASUS COMPUTER (China)
Tel:
+86-10-82667575
E-Mail: http://vip.asus.com.cn/eservice/techserv.aspx.
142