Electrolux ERCG9030AS User manual

installation
and user manual
e:line canopy rangehoods
ERCM9010AS
ERCE9020AS
ERCG9030AS
electrolux e:line rangehoods contents 1
electrolux e:line rangehoods product description 2
Congratulations
Product description
Congratulations and thank you for choosing our E:Line
canopy rangehood. We are sure you will find your new
rangehood a pleasure to use. Before you use your
rangehood, we recommend that you read through the
whole user manual, which provides the description of the
rangehood and its function.
1
To avoid the risks that are always present when you use
an electrical appliance it is important that the canopy
rangehood is installed correctly and that you read the
safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners. After
unpacking the canopy rangehood please check it is not
damaged. If in doubt, do not use the appliance but contact
your local Electrolux Service Centre.
2
conditions of use
4
3
This appliance is intended to be used in household and
similar applications such as:
• Staff kitchen areas in shops, offices and other
working environments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments.
5
6
Contents
• Product description
• Important safety instructions • Dimensions
• Installation
• Using the rangehood
• Maintenance and cleaning
• Changing the halogen lamps
• Optional ducting accessories
• Warranty
7
2
3
4
5
6
8
8
9
10
environmental tip
ERCG9030AS
ERCE9020AS
Component list
Technical specification
1.
2.
3.
4.
5.
6.
7.
Model ERCG9030AS
Power supply: 220-240 volts 50Hz.
Connects to 7.5A GPO.
Lights: 2 x 20 watt 12 volt halogen.
Exhaust cover ceiling mounting bracket
Telescopic exhaust cover set
Flexible exhaust pipe
Exhaust duct transition
Main body mounting brackets
Main body and fan housing assembly
Grease filters
Information on disposal for users
Additional items required for installation
•Most of the packing materials are recyclable. Please
dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
•Fixings required to attach main body mounting brackets
and anti tilt fixings.
•Fixings required to attach exhaust cover mounting
brackets to the ceiling.
•If you wish to discard this product, please contact your
local authorities and ask for the correct method of disposal.
ERCM9010AS
Model ERCE9020AS
Power supply: 220-240 volts 50Hz.
Connects to 7.5A GPO.
Lights: 2 x 20 watt 12 volt halogen.
Model ERCM9010AS
Power supply: 220-240 volts 50Hz.
Connects to 7.5A GPO.
Lights: 2 x 20 watt 12 volt halogen.
electrolux e:line rangehoods important safety instructions 3
electrolux e:line rangehoods dimensions / electrical connection 4
Important safety instructions
Dimensions
Electrical connection
This manual explains the proper use of your new E:Line
canopy rangehood. Please read this manual carefully
before using the product. This manual should be kept in
a safe place for handy reference.
593mm
Canopy dimensions
1175mm
(maximum)
NOTE: *The fan housing exhaust outlet is 163mm in diameter. Use
duct transition or flexible pipe supplied with the canopy rangehood
as a reducer if using 150mm optional ducting accessories.
(See page 9 for optional ducting accessories).
This canopy rangehood is a domestic appliance which has
been manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 60335.2.31.
100mm
900mm
500mm
ERCM9010AS
ERCE9020AS
caution
•Check that the mains voltage matches with the voltage
on the data plate inside the canopy rangehood.
•Check that the installation complies with standards of
local gas and electricity authorities.
•If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent of similarly qualified
person in order to avoid a hazard.
Safety warnings – For the installer
328mm
This symbol indicates the possibility of injury or
damage to property
When installing the cooker hood, make sure you adhere
to the minimum and maximum distances from the cooker
hood base to the hob surface (as per table on right page 5).
391mm
O163mm*
Meanings of symbols used in this manual are shown below:
Exhaust duct installation:
Fig. 1
This symbol indicates never to do this
328mm
The following rules must be strictly followed to obtain
optimal air extraction.
391mm
This symbol indicates always do this
593mm
1175mm
(maximum)
caution
593mm
100mm
1175mm
(maximum)
900mm
Young children should be supervised to ensure they do not
play with the canopy rangehood.
Ensure the canopy rangehood is switched off before carrying
out maintenance, to avoid any possibility of electric shock.
Never carry out flambé cooking under the canopy rangehood.
500mm
900mm
500mm
Fig. 2
ERCG9030AS
331mm
407mm
O163mm*
The exhaust from the canopy rangehood must not
be discharged into any heating flue, which may carry
combustion products from other sources. (Fig. 1)
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when the
canopy rangehood is used at the same time as appliances
burning gas or other fuels.
698mm
83mm
Always cover lit gas burners with pots or pans when
canopy rangehood is in use.
Always switch off gas burners before you remove pots or pans.
900mm
520mm
Do not leave lit gas burners exposed due to the risk of fire.
(Fig. 2)
O163mm
• Failure to observe these basic instructions will
drastically reduce the performance and increase the
noise levels of the cooker hood.
The exhaust from the cooker hood must not be discharged
into any heating flue, which may carry combustion products
from other sources.
O163mm*
This canopy rangehood cannot be installed for external use.
• When using flexible duct always install duct with
helix pulled taut to minimise pressure loss.
Exhaust air must not be discharged into a wall cavity, unless
the cavity is designed for that purpose.
100mm
This canopy rangehood is not recommended for barbecues.
Grease filters must be removed at least every four weeks
for cleaning to reduce the risk of fire.
• Do not reduce the size or restrict exhaust duct.
• Keep bends in the exhaust duct to a minimum.
Read the following carefully to avoid an electric
shock or fire.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
• Keep exhaust duct short and straight
1275mm
(maximum)
electrolux e:line rangehoods rangehood installation / installation sequence 5
Rangehood installation
electrolux e:line rangehoods installation / using the rangehood 6
Using the rangehood – ERCM9010AS
Installation
344mm
(rear to wall)
ERCM9010AS
ERCE9020AS
155mm
ceiling
mounted
bracket
Distance from hood base to top of hob
303mm
344mm
37mm
ceiling
mounted
bracket
(rear to wall)
155mm
303mm
46mm
155mm
155mm
168mm
168mm
100mm
46mm
(rear view of hood)
wall mounting
brackets
168mm
523mm
100mm
168mm
(rear view of hood)
wall mounting
brackets
anti-tilt
fixing points
523mm
71mm
hood
base
anti-tilt fixing points
324mm
349mm
374mm
399mm
71mm
hood
top
ofbase
hob
324mm
349mm
374mm
399mm
top
of hob
ERCG9030AS
359mm
(rear to wall)
303mm
359mm
37mm
ceiling
mounted
bracket
(rear to wall)
155mm
37mm
ceiling
155mm
168mm
168mm
100mm
155mm
ceiling
(recommended area
behind flue cover for
power point location)
(rear view of hood)
525mm 100mm
168mm
(rear view of hood)
168mm
138mm 138mm
wall mounting
brackets
anti-tilt
fixing points
wall mounting
brackets
102mm
138mm 138mm
525mm
800mm
electric
600mm
800mm
2.Mark the location for the wall and ceiling bracket fixing
points above the hood base using the hood base as the
reference point (refer diagram left).
3.Install wall and ceiling mounting brackets with suitable
screws (to support a total weight of 30kg) to the wall at the
positions marked in diagram left.
4. Remove the protective plastic film from the hood body
and hang hood on the mounting brackets then secure at
the anti-tilt locations as indicated in diagram left.
Depending on the preferred installation/ducting mode,
follow step 5a or 5b below.
5a.Recirculating mode (Fig. a). Using the centre line,
secure the ceiling mount bracket to the wall using
suitable screws. Attach the recirculating T-piece
(optional kit AR600RK for models ERCM9010 and
ERCE9020, or AR600RKG for model ERCG9030) to
the ceiling mount bracket. Install flexible pipe between
T-piece and fan transition outlet. Use cable ties or
suitable duct tape to secure flexible pipe to T-piece.
anti-tilt lower back
edge of glass
fixing points
5b.Ducted mode (Fig. b). The canopy rangehood has been
supplied with flexible exhaust pipe and duct transition
piece, alternatively a 150mm dia. non-combustible flue
pipe can be used. Continue the centre line to the ceiling.
Attach the ceiling mount bracket on the centre line. Fit
preferred flue pipe to the fan transition duct.
(a)
NOTE: To ensure optimum performance of the rangehood, the
use of rigid ducting is recommended. The use of bends should be
avoided. Rigid flexible ducting is suitable, although loose flexible
ducting is unacceptable. All ducting must be fire retardant.
Installation of telescopic exhaust covers
Separate the inner and outer exhaust covers, and carefully
remove the protective coating from both. Carefully
reassemble the inner and outer exhaust covers sections by
sliding the inner into the outer exhaust cover. Carefully lower
the assembled inner and outer exhaust covers onto the top
of the cooker hood body, and insert the exhaust cover into
the rangehood body approximately 5mm. Fix inner (top)
exhaust cover to the ceiling mounting bracket with screws
supplied. Ensure that the inner (top) section is extended.
1.Using a spirit level mark a vertical centre line on the wall
where the hood is to be positioned, and a horizontal line
at the hood base position (refer diagram bottom left).
ERCM9010AS & ERCE9020AS
ERCG9030AS
light
auto off
OFF
To operate Canopy
Depress any of the fan symbols, depending on desired fan
speed, to turn the canopy on. Depress the OFF button to
turn canopy off.
Setting the power level required
All buttons have back-lit symbols.
Fan operation – select speed to suit cooking conditions.
Low – light frying/boiling
Medium – frying/wok cooking/heavy boiling
Depress the ‘light’ button to turn the lights ON and depress
‘light’ button again to turn the lights OFF.
Using the Timer
At the end of cooking if the timer is switched on, the
rangehood will continue to run for an additional 5 minutes
to remove any odours that remain at the completion of
cooking. After 5 minutes the canopy will turn itself OFF.
Auto Off
Depress ‘auto off’ button to turn the timer ON and depress
‘auto off’ button again to cancel the timer function.
important
o complete the rangehood installation, insert the filter/s to
T
the underside of the hood body. Place back edge of filter
into position and push up front edge so that the filter clips
into place.
NOTE: The height of the underside of the hood body must be a
minimum of 600mm above an electric cooktop & 650mm above a
gas cook top and a maximum height of 800mm (see table right).
high
To switch Lights ON and OFF
If installed in recirculating mode, insert the optional carbon
filter (included in recirculation kit AR600RK for models
ERCM9010AS and ERCE9020AS, or recirculation kit
AR600RKG for model ERCG9030AS).
top
of hob
medium
ERCG9030AS
Care must be taken to ensure the screws are not cross
threaded when attaching the outer flue cover.
lower back
top
ofedge
hob of glass
low
High – grilling, intensive frying and wok cooking
ERCM9010AS
ERCE9020AS
(b)
102mm
Installation sequence
NOTE: Installation must be in accordence with local
building regulations.
NOTE: When installed in recirculation mode, it is recommended
to use a carbon filter (included in recirculation kit AR600RK for
models ERCM9010AS and ERCE9020AS, or recirculation kit
AR600RKG for model ERCG9030AS, refer to page 9) to prevent
odours being emitted back into the room. OR
155mm
303mm
46mm
46mm
maximum
650mm
* If the instructions of the hob specify a greater distance than the
minimum above, then that shall be the minimum height for installation
ceiling
(recommended area
behind flue cover for
power point location)
ceiling
mounted
bracket
(recommended area
behind flue cover for
power point location)
minimum*
gas
37mm
ceiling
(recommended area
behind flue cover for
power point location)
hob type
NOTE: For ducted mode, we recommend extending flue pipe
through the roof to external “china hat” to vent exhaust externally.
We do not recommend venting into ceiling cavity.
Your Electrolux rangehood is now ready to use.
electrolux e:line rangehoods using the rangehood 7
electrolux e:line rangehoods maintenance / halogen lamps 8
Using the rangehood – ERCE9020AS
Using the rangehood – ERCG9030AS
Maintenance and cleaning
Changing the halogen lamps
caution
1 min.
low
medium
high
light
auto off
OFF
boost
lock
low
medium
high
light
auto off
OFF
boost
• Before maintenance or cleaning is carried out,
the canopy rangehood should be disconnected
from the main power supply. Ensure that the
rangehood is switched off at the wall socket
and the plug removed.
Touch screen operation
Touch screen operation
Lock – Touch and hold ‘lock’ button for 3 seconds to lock
control interface when cleaning, touch and hold for 3 seconds
to unlock control interface.
Lock – Touch and hold ‘lock’ button for 3 seconds to lock
control interface when cleaning, touch and hold for 3 seconds
to unlock control interface.
• External surfaces are susceptible to scratches
and abrasions, so please follow the cleaning
instructions to ensure the best possible result is
achieved without damage.
Using a small flat blade screwdriver remove the inner
stainless steel ring to obtain access to the halogen globe.
When removing the inner ring, do so carefully, as the glass
lens could easily fall out of the inner ring. Remove halogen
globe, whilst cool, and replace carefully with a new globe.
Fan – select speed to suit cooking conditions.
Fan – select speed to suit cooking conditions.
Stainless steel surface
The rangehood takes 2 x 20W, 12 volt halogen globes.
Low – light frying/boiling
Low – light frying/boiling
Medium – frying/wok cooking/heavy boiling
Medium – frying/wok cooking/heavy boiling
Clean stainless steel surfaces using non-abrasive cleaning
products that are specifically for use on stainless steel.
High – grilling, intensive frying and wok cooking
High – grilling, intensive frying and wok cooking
Boost – increases air extraction when intense cooking &
frying is taking place, which is generally over a short time
frame when searing foods. On selecting the boost function
the fan intensity will increase for 1 minute, then revert back
to the last selected fan speed.
Boost – increases air extraction when intense cooking &
frying is taking place, which is generally over a short time
frame when searing foods. On selecting the boost function
the fan intensity will increase for 1 minute, then revert back
to the last selected fan speed.
To ensure best results also use an even pressure and follow
the grain of the stainless steel. Use of a soft cloth reduces
the risk of scratching. If the cloth is wet ensure that a dry
soft cloth is used to wipe down the surface again reducing
the risk of any surface rust appearing.
Control panel surface
To switch Lights ON and OFF
To switch Lights ON and OFF
Touch the ‘light’ button to turn the lights ON and touch
‘light’ button again to turn the lights OFF.
Touch the ‘light’ button to turn the lights ON and depress
‘light’ button again to turn the lights OFF.
Using the Timer
Using the Timer
At the end of cooking if the timer is switched on, the
rangehood will continue to run for an additional 5 minutes
to remove any odours that remain at the completion of
cooking. After 5 minutes the canopy will turn itself OFF.
At the end of cooking if the timer is switched on, the
rangehood will continue to run for an additional 5 minutes
to remove any odours that remain at the completion of
cooking. After 5 minutes the canopy will turn itself OFF.
Auto Off
Auto Off
Touch ‘auto off’ button to turn the timer ON and touch
‘auto off’ button again to cancel the timer function.
Touch ‘auto off’ button to turn the timer ON and depress
‘auto off’ button again to cancel the timer function.
The inlay control panel can be cleaned using warm soapy
water. Ensure the cloth is well wrung before cleaning.
Use a dry soft cloth to remove any excess moisture left
after cleaning.
Grease filters
The mesh filters can be cleaned either by hand or in
the dishwasher. After cleaning ensure that the filters are
completely dry before refitting.
By hand: Soak in warm water and some washing up liquid.
For stubborn grease stains use a soft nylon brush to help
remove these stains.
In a dishwasher: Ensure that placement of the filters
is made so as to not impede the function of the spray
arm. Washing the filters in a dishwasher may cause
discolouration of the aluminium inner mesh over time
although it will not affect their performance. Filters should
be washed separately to crockery and kitchen utensils.
Glass fascia
The glass fascia on model ERCG9030AS can be cleaned
with window cleaner or a mild detergent and hot water and
paper towelling.
important
When handling globes hold with a cloth or gloves to ensure
perspiration does not come in contact with the globe as this
can reduce the life of the globe.
electrolux e:line rangehoods optional ducting accessories 9
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: RANGEHOOD
Optional ducting accessories
This document sets out the terms and conditions of the product
warranties for Electrolux Appliances. It is an important document.
Please keep it with your proof of purchase documents in a safe place for
future reference should you require service for your Appliance.
1. In this warranty
AR150RC
(a) ‘acceptable quality’ as referred to in clause 10 of this warranty has the
same meaning referred to in the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian Consumer
Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Electrolux product purchased by you
accompanied by this document;
AR150F
AR600CF*
AR600CFG†
ERCM9010AS*
ERCE9020AS*
Replacement Filter
ERCG9030AS†
(i)
accident
(ii) misuse or abuse, including failure to properly maintain or service
(iii) normal wear and tear
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
‘major failure’ as referred to in clause 10 of this warranty has the same
meaning referred to in the ACL and includes a situation when an
Appliance cannot be repaired or it is uneconomic for Electrolux, at its
discretion, to repair an Appliance during the Warranty Period;
where the Appliance is used for personal, domestic or household
use (i.e. normal single family use) as set out in the instruction
manual, the Appliance is warranted against manufacturing defects
in Australia for 24 months and in New Zealand for 24 months,
following the date of original purchase of the Appliance;
(ii) where the Appliance is used for commercial purposes (including
being used to directly assist a business or where the Appliance is
used in a multi-family communal or share type environment), the
Appliance will then be warranted against manufacturing defects in
Australia for 3 months and in New Zealand for 3 months, following
the date of original purchase of the Appliance.
(h) ‘you’ means the purchaser of the Appliance not having purchased the
Appliance for re-sale, and ‘your’ has a corresponding meaning.
2.
(a) the Appliance is damaged by:
(e) ‘Electrolux’ means Electrolux Home Products Pty Ltd of 163
O’Riordan Street, Mascot, NSW 2020, ABN 51 004 762 341 in respect
of Appliances purchased in Australia and Electrolux (NZ) Limited of 3-5
Niall Burgess Road, Mount Wellington, in respect
of Appliances purchased in New Zealand;
(i)
AR600RK*
AR600RKG†
You may not make a claim under this warranty unless the defect claimed
is due to faulty or defective parts or workmanship. Electrolux is not liable in
the following situations (which are not exhaustive):
(iv) power surges, electrical storm damage or incorrect power supply
(g) ‘Warranty Period’ means:
AR150WV
7.
(d) ‘ASC’ means Electrolux’ authorised serviced centres;
(f)
AR600FS*
AR600FSG†
6. Proof of purchase is required before you can make a claim under
this warranty.
This warranty only applies to Appliances purchased and used in Australia
or New Zealand and is in addition to (and does not exclude, restrict, or
modify in any way) any non-excludable statutory warranties in Australia or
New Zealand.
3. During the Warranty Period Electrolux or its ASC will, at no extra charge
if your Appliance is readily accessible for service, without special
equipment and subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Electrolux or its ASC may use
remanufactured parts to repair your Appliance. You agree that any replaced
Appliances or parts become the property of Electrolux. This warranty does
not apply to light globes, batteries, filters or similar perishable parts.
4. Parts and Appliances not supplied by Electrolux are not covered by
this warranty.
5. You will bear the cost of transportation, travel and delivery of the Appliance
to and from Electrolux or its ASC. If you reside outside of the service area,
you will bear the cost of:
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions supplied with the
Appliance;
(b) the Appliance is modified without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced;
(d) the Appliance was serviced or repaired by anyone other than
Electrolux, an authorised repairer or ASC.
8. This warranty, the contract to which it relates and the relationship between
you and Electrolux are governed by the law applicable where the Appliance
was purchased. Where the Appliance was purchased in New Zealand for
business purposes the Consumer Guarantee Act does not apply.
9. To the extent permitted by law, Electrolux excludes all warranties and
liabilities (other than as contained in this document) including liability for
any loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
10. For Appliances and services provided by Electrolux in Australia,
the Appliances come with a guarantee by Electrolux that cannot be
excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to
have the Appliance repaired or replaced if the Appliance fails to be of
acceptable quality and the failure does not amount to a major failure.
The benefits to you given by this warranty are in addition to your other
rights and remedies under a law in relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty Period, Electrolux shall, at its discretion,
determine whether repair, replacement or refund will apply if an Appliance
has a valid warranty claim applicable to it.
12. For Appliances and services provided by Electrolux in New Zealand, the
Appliances come with a guarantee by Electrolux pursuant to the provisions
of the Consumer Guarantees Act, the Sale of Goods Act and the Fair
Trading Act.
13. To enquire about claiming under this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (eg an invoice) available;
(a) travel of an authorised representative;
(d) telephone the numbers shown below.
(b) transportation and delivery of the Appliance to and from
Electrolux or its ASC,
In all instances, unless the Appliance is transported by Electrolux or an
Electrolux authorised representative, the Appliance is transported at the
owner’s cost and risk while in transit to and from Electrolux or its ASC.
14. You accept that if you make a warranty claim, Electrolux and its ASC may
exchange information in relation to you to enable Electrolux to meet its
obligations under this warranty.
Important Notice
Before calling for service, please ensure that the steps listed in point 13 above have been followed.
NOTE: Accessories are to be purchased separately.
Part Numbers
ERCM9010AS* & ERCE9020AS*
ERCG9030AS†
Description
AR150RC
AR150RC
150mm G/Bond Roof Cowl
AR150F
AR150F
150mm G/Bond Flue 1200mm
AR150WV
AR150WV
AR600RK*
AR600RKG
AR600CF*
AR600CFG†
Replacement carbon mat filter
AR600FS*
AR600FSG†
Stainless steel exhaust cover extension 1200mm
150mm Wall Vent + Flexi Duct
†
Recirculating Kit
FOR SERVICE
or to find the address of your nearest
state service centre in Australia
PLEASE CALL 13 13 49
For the cost of a local call (Australia only)
FOR SERVICE
or to find the address of your nearest
authorised service centre in New Zealand
FREE CALL 0800 10 66 10
(New Zealand only)
GRH_Warr_Apr11
SERVICE AUSTRALIA
ELECTROLUX HOME PRODUCTS
www.electrolux.com.au
SERVICE NEW ZEALAND
ELECTROLUX HOME PRODUCTS
www.electrolux.co.nz
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in Australia
PLEASE CALL 13 13 50
For the cost of a local call (Australia only)
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
(New Zealand only)
Electrolux Home Products Australia
telephone: 1300 363 640
fax:
1800 350 067
email:customercare@electrolux.com.au
web:www.electrolux.com.au
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say
“Oh! How did you know? That’s exactly what I wanted!” That’s the kind of
feeling that the designers at Electrolux seek to evoke in everyone who
chooses or uses one of our products. We devote time, knowledge, and a
great deal of thought to anticipating and creating the kind of appliances that
our customers really need and want.
This kind of thoughtful care means innovating with insight. Not design for
design’s sake, but design for the user’s sake. For us, thoughtful design means
making appliances easier to use and tasks more enjoyable to perform, freeing
our customers to experience that ultimate 21st century luxury, ease of mind.
Our aim is to make this ease of mind more available to more people in more
parts of their everyday lives, all over the world. So when we say we’re thinking
of you, you know we mean just that.
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com.au
P/No. 305469302/H
© Copyright 2011 Electrolux Home Products Pty Ltd
ABN 51 004 762 341
ELINERANUM_Jun11