Sharp DV-SL80X Specifications

Optical Measuring
MF SERIES/MF-U SERIES
Catalog No. E4153-176
Higher performance measuring microscopes stretch
the boundaries
2
Expectations of Measuring Microscope Performance
A measuring microscope is a versatile instrument featuring highly accurate linear measurement as well as observation
functions. This combination enables detailed inspection of products such as semiconductors, electrical and electronic
parts, precision automobile components, plastic moldings, tools, and medical goods. Delicate workpieces that would
be deformed by contact measurement and workpieces with details too small to be traced by a contact probe can be
easily measured.
The essential element of a measuring microscope is an
optimum balance of optical performance, accuracy and
ease of operation. Objects that were previously invisible,
or only barely visible, can now not only be observed but
also measured. We believe that customer expectations
of measuring microscope performance will keep on
growing, and this must be matched by ease of use, high
measurement throughput and environmental friendliness.
Mitutoyo will continue to deliver high-quality and highdefinition measuring microscopes while maintaining our
commitments and beliefs in order to fulfill our responsibility
to support fundamental industrial technologies.
In-House Design
Mitutoyo designs all measuring microscope main units, optical systems (including lenses),
and the digital scales that are essential for accuracy.
This approach enables a level of support that otherwise would be impossible, and puts us
in a position to speedily comply with our customers’ specific requests as far as practicable.
Underground research facility
Concept Design, Manufacturing, and
Evaluation of Microscope Main Units and
Components
Development Design, Manufacturing, and
Evaluation of Optical Systems and Lenses
3
Development, Manufacturing, and
Evaluation of High Accuracy Digital Scales
4
Superlative Optical Performance
Thanks to a new design of optical tube and modification
of the objective lens specifications, flare that occurs within
the optical system is suppressed as much as possible so
that minute details on the workpiece are clearly shown.
In addition, the internal black finish achieves a high
image contrast and clear observation. The MF-U Series is
equipped with the established FS system metallographic
microscope head which provides vivid images of high color Image brightness is about double compared with
reproducibility and features primary-color correction. (The conventional microscopes.
objective lenses are plan apochromat*.)
MF/MF-U Series microscopes
Conventional microscope
With much higher lighting efficiency in the optical
50X
50X
system, which ensures sufficient illumination intensity,
this series attains high-magnification measurements and
a dark-field observation environment that is efficient and
*Image
distortion and chromatic aberration in the wavelength range of the three primary colors
less tiring.
(blue, yellow and red) are corrected.
Image of outer cover of floppy disk
Measuring Accuracy Approaching JIS Level 0
(Common to MF and MF-U)
Measuring microscopes must operate at a high level in terms of
measuring accuracy and optical performance.
This series achieves the quoted measuring uncertainty for all
stage sizes**.
We believe that this series, which achieves a large measurement
range and high accuracy at the same time, will help you in every
measurement situation.
**Measured conforming to the measurement method at each of the X and Y axes stipulated by JISB7153.
Standard
Standard
X-axis measuring
accuracy
Uncertainty (X, Y) = (0.25 + 0.02L)µm
Reference : JIS B 7153 measuring microscope measuring accuracy
at each axis (20˚C)
Level 0 (2 + 0.01L)µm or less Level 1 (4 + 0.02L)µm or less
L = measurement length (mm)
The digital scale built into the microscope body is a photoelectric
type transmission linear encoder, with a maximum response
speed of 50 m/min. This scale features high accuracy
specifications developed in our underground research facility
which is equipped with the world’s highest scale accuracy
evaluation technology.
Mitutoyo acquired the first certification for calibration of line
standards (standard scale of 500mm or less) in Japan.
Microscope images on this page are digital images, so they differ somewhat from the actual images.
Line standard calibrator
Underground facility temperature fluctuation graph
5
Glass scales
6
Applications of the Measuring Microscope
Multimode Observation
These microscopes combine
metallographic observation functions
such as DF mode (to observe surface
scratches and minute steps which are
difficult to see in BF mode), Polarized
Light mode (to observe the hue and
image contrast to suit the polarization
characteristics using the polarizer
and analyzer) and Differential Interference Contrast (to
observe minute surface steps, or similar features, as color
image contrasts while using the polarization filter and
differential interference prism at the same time) with
measurement functions.
BF observation
DF observation
Polarized-light
observation
Differential
Interference
Contrast
observation
Saving High-Resolution Images
Anyone can easily take high-resolution microscope images mounting a high-pixel digital
camera onto the main unit. It is also possible for many users to observe and analyze
the image displayed on a monitor at the same time. You can also generate inspection
tables with images attached.
3D Image Analysis
Even if the microscope image has shallow depth of focus,
you can easily acquire an omnifocal image using a special
program. Furthermore, these microscopes can also
achieve a 3D display at low cost and in a short space of
time.
MF-UB1010B+DV520V
MF-UB1010B+
QM-Data200
High Accuracy Measurement
This is a high-value-added system based on a
microscope that can not only measure length (and
height, optionally) but also check the processed state of
a surface and other elements while peering through the
eyepiece. The automatic edge input function for image
measurement enables edges to
be input without moving the
stage if the target falls in a single
screen image, improving the
measurement efficiency.
MF-B1010B+Vision Unit
Microscope images on this page are digital images,
so they differ somewhat from the actual images.
7
Ergonomic and High Performance Design Features
Widefield Eyepiece
Digital Display with High Visibility Display
(common to MF and MF-U)
(common to MF and MF-U)
This eyepiece has
the best-in-class field
number* of 24mm (10X).
Because the visual field
through the eyepiece is
so wide, strain on the
eyes is small, reducing
fatigue during extended
periods of observation
or measurement. In
addition, each eyepiece
has independent diopter
adjustment.
Because the minimum reading of the digital counter
(with two or three axes), which is equipped with all
the models as standard, can be switched between
1µm, 0.5µm and 0.1µm, high resolution measurement
is possible. The zeroset, direction changeover, and
smoothing functions are also featured as standard.
Since the highly versatile RS-232C interface is adopted,
data can be output to a general-purpose printer or
personal computer. The counter display alone can be
output to spreadsheet software. The digital counter can
be installed onto the left or right side of the column.
24mm
20mm
MF
Other manufuacturers’
product
*Target range within the whole field of view
using the 1X objective lens.
Highly Rigid Structure
Front of counter
(common to MF and MF-U)
The microscope column supporting the optical tube, and the
base supporting the whole body, have been optimized for high
rigidity using FEA analysis techniques to guarantee high accuracy
measurement and blur-free observation throughout the entire
stroke at any magnification. The column is stiffened by an internal
transverse rib and the power supply is external to reduce heat
effects. Also, during development, these
microscopes were repeatedly subjected to
drop tests*, transportation tests* and wear
tests* to prove their durability in maintaining
a sharp, clear field of view with the specified
accuracy under normal conditions of
transport and use.
Rear of counter
A Wide Measuring Range
(common to MF and MF-U)
Workpiece sizes differ from minute to large.
Because measuring microscopes are widely used various industries,
they many variations of measurement range.
This series has a wide measurement range of 400mm (X axis) ×
200mm (Y axis) × 220mm (Z axis), useful for measuring of boards,
shafts, and other workpieces. This series also incorporates a swivel
rotation mechanism* which is helpful for aligning the workpiece
with the table movement direction.
*Minimum Y axis length is 170mm.
Column
Z axis
220mm
Y axis
200mm
*Mitutoyo’s original tests using specially
packaged products.
MF-B4020B
X axis
400mm
8
Zeroset
switch
Quick release
handle
Built-in Quick Release Mechanism and Zeroset Switch
(common to MF and MF-U)
The stage feed can be switched between coarse and fine feed (FREE/LOCK) by using the quick release handles. These are very
useful when measurement distance is long by allowing a quick return to the datum point, since the stage becomes completely free.
Twist roller method
Because this mechanism adopts the twist roller method, you can experience smooth feeding with little impact when switching it.
In addition, you can keep your grasp on the handles during measurement, except when focusing the microscope, because the counter’s
zeroset switch is built in near the handle*.
*The zeroset switch is built into the X and Y axes, not in the Z axis.
When the zeroset switch is pressed, an operation alarm sounds.
MF
MF-U
Standard Handles Fixed to Both
Sides of the Z Axis (MF and MF-U)
Standard Tilting Optical Tube
Slide Type Nosepiece
(MF-U only)
(factory-set option for MF)
The Z-axis handles provided on both ends of the
column as standard allow right-handed and lefthanded users to easily operate this microscope.
The digital counter can be mounted onto either
end of the column, so enabling an operating
environment suited to the user’s dominant hand.
The handles are ergonomically positioned so that
anyone can comfortably operate them.
Comfortable observation is achieved through eye
point adjustment to meet the varying physical
sizes of operators. The angle of the column can
be fixed anywhere from 0 to 30 degrees.
The reticle inside the optical tube is replaceable.
Generally, only one objective lens can be
mounted onto the MF (limited calibration optical
system), so it must be removed and replaced
with another to change magnification.
The slide type nosepiece, which can hold up
to two objective lens, allows quick change
of magnification.
Note: External lighting cannot be used at the same time.
9
Measuring Microscope
MF Series
MF-B505B
MF-B1010B
MF-B2017B
MF-B3017B
*The binocular tubes
(eyepieces) are optional.
*The binocular tubes
(eyepieces) are optional.
MF-B2010B
*The binocular tubes
(eyepieces) are optional.
*The binocular tubes
(eyepieces) are optional.
MF-B4020B
*The binocular tubes
(eyepieces) are optional.
*The binocular tubes
(eyepieces) are optional.
Features
† Clear erect image in widefield view, with flare suppressed by the new optical system (3X: 80% reduction in flare
compared with conventional products*)
† Employs the high NA objective lens, ML Series, just for the MF (long working distance specifications).
† Supports high-magnification eyepiece observation of up to 2000X.
† The adjustable aperture diaphragm (reflection/transmission) allows measurements with suppressed light diffraction.
† Quick release mechanism useful for making rapid long range measurements
† Precise focus and observation/measurement using the coarse/fine feed Z handles incorporated onto both sides as
standard.
† Standard measuring microscope with a wide variety of attractive options such as an Vision Unit
* Mitutoyo survey
10
Specifications
Model No.
Without Z axis
length measurement Order No.
With Z axis length Model No.
measurement
Order No.
Optical tube
Image
Observation method
Eyepiece (option) adjustable diopter
Objective lens
Maximum target height
Focusing system
Focusing method
Transmitted light
Illumination unit
Reflected light
Filter for illumination
Measuring range
Top size
Effective stage glass size
Swiveling angle
Stage
Maximum loading (on top
of the glass)
Quick release mechanism
Zeroset switch
Length measuring system
Minimum reading
Digital counter
Display axis
Functions
Measuring accuracy*2 (X and Y axes: no load)
Maximum power consumption
External dimensions
(W x D x H)mm
Main unit
Weight
Specifications
Control box
Weight
MF-A505B
MF-A1010B
MF-A2010B
MF-A2017B
MF-A3017B
MF-A4020B
176-561
176-562
176-563
176-564
176-565
176-566
MF-B505B
MF-B1010B
MF-B2010B
MF-B2017B
MF-B3017B
MF-B4020B
176-581
176-582
176-583
176-584
176-585
176-586
Monocular or binocular tube option (angle of column: 25); standard TV camera port in all models; reticle (cross
hairs of broken line, line width: 5µm); optical path switching (observation / TV camera = 50 / 50)
Erect image
BF observation
10X (field number: 24), 15X, 20X
Note: Monocular tube: one 10X lens, binocular tube: two 10X lenses
ML objective lens 3X (standard), 1X, 5X, 10X, 20X, 50X, 100X
150mm
220mm
1-axis coarse / fine feed, left and right handles (coarse feed: 30mm / revolution, fine feed: 0.2mm / revolution)
Telecentric system, adjustable aperture diaphragm, non-stepped brightness control, 12 V 50 W tungsten-halogen
lamp, built-in cooling fan
Koehler illumination, adjustable aperture diaphragm, non-stepped brightness control, 12 V 50 W tungsten-halogen
lamp, built-in cooling fan
One GIF filter and one LB80 filter attached (can be set to either of the transmitted or reflected illuminator)
50 x 50mm
100 x 100mm
200 x 100mm
200 x 170mm
300 x 170mm
400 x 200mm
280 x 280mm
280 x 280mm
350 x 280mm
410 x 342mm
510 x 342mm
610 x 342mm
180 x 180mm
180 x 180mm
250 x 150mm
270 x 240mm
370 x 240mm
440 x 240mm
—
±5°(left)
±3°(left)
10kg
562 × 730 × 667 562 × 730 × 667 624 × 745 × 667 632 × 892 × 782 682 × 892 × 782 757 × 907 × 782
65.5kg
69.5kg
130kg
138kg
144kg
Power ON / OFF switch, 100 to 120 VAC (5A fuse) / 220 to 240 VAC (2.5A fuse), GND terminal
2.2kg
Spare lamp (common to transmitted and reflected illuminators): 12 V 50 W tungsten-halogen lamp No. 513667
A long-life lamp (No. 12BAB345) is also available, though the illumination intensity is slightly low.
External Dimensions Chart
(unit: mm)
327
261
249
327
79
782
457.5
200
247.5
413
667
78
78
79
249
551
360
234~284
15kg
X and Y axes (standard)
X and Y axes (standard), (MF-B type also features for Z axis as standard)
High accuracy digital scale*1
Switchable between 1/0.5/0.1µm
X and Y axes (X, Y, and Z axes in MF-B type)
Zeroset, direction changeover, and RS-232C output
(2.5 + 0.02L)µm L: measuring length (mm)
250 W
*1: Patented in Japan
*2: The measurement method conforms to JISB7153.
261
20kg
124
360
730~780
300~350
305~505
MF-B1010B
621
452~652
907~1007
MF-B4020B
11
124
Universal Measuring Microscope
MF-U Series
MF-UB505B
MF-UB1010B
MF-UB2017B
MF-UB3017B
*The revolving nosepiece,
objective lenses, and
fiber-optic illumination are
optional.
*The revolving nosepiece,
objective lenses, and
fiber-optic illumination are
optional.
MF-UB2010B
*The revolving nosepiece,
objective lenses, and fiber-optic
illumination are optional.
*The revolving nosepiece,
objective lenses, and fiber-optic
illumination are optional.
MF-UB4020B
*The revolving nosepiece,
objective lenses, and fiber-optic
illumination are optional.
*The revolving nosepiece,
objective lenses, and fiber-optic
illumination are optional.
Features
† Clear erect image in widefield view, with flare suppressed by the new optical system (2X: 80% reduction in flare
compared with conventional products*)
† Employs the established FS optical system high NA objective lens MPlanApo/BDPlanApo/GplanApo Series (long
working distance specifications)
† Offers high-resolution observation and high accuracy measurement solutions by combining the metallographic
microscope and measuring microscope functions into a single microscope.
† Supports high-magnification eyepiece observation of up to 4000X.
† The adjustable aperture diaphragm (reflection/transmission) mechanism allows observation measurements with
suppressed light diffraction.
† Quick release mechanism useful for making rapid long range measurements
† Precise focus and observation/measurement using the coarse/fine feed Z handles incorporated onto both sides as
standard.
† Standard measuring microscope with a wide variety of attractive options such as an Vision Unit
* Mitutoyo survey
12
Specifications
MF-UA505B
MF-UA1010B MF-UA2010B MF-UA2017B MF-UA3017B MF-UA4020B
176-567
176-568
176-569
176-570
176-571
176-572
MF-UC505B
MF-UC1010B
MF-UC2010B
MF-UC2017B
MF-UC3017B
MF-UC4020B
176-573
176-574
176-575
176-576
176-577
176-578
MF-UB505B
MF-UB1010B
MF-UB2010B
MF-UB2017B
MF-UB3017B
MF-UB4020B
176-587
176-588
176-589
176-590
176-591
176-592
MF-UD505B
MF-UD1010B
MF-UD2010B
MF-UD2017B
MF-UD3017B
MF-UD4020B
176-593
176-594
176-595
176-596
176-597
176-598
Trinocular tilting optical tube (angle of column: 0 to 30); siedentopf type pupil distance adjustment: 51 to 76mm;
1X built-in tube lens; reticle (broken-line crosshairs, line width: 5µm); optical path switching (observation/TV
camera = 50/50)
Erect image
BF/DF (MF-UC, UD type only), polarization, and differential interference
10X (field number: 24, two eyepieces are supplied as standard), 15X, 20X
All of M Plan Apo, M Plan Apo SL, G Plan Apo lenses
All of BD Plan Apo and BD plan Apo SL lenses
Aligning parfocal manual revolving nosepiece / aligning power revolving nosepiece (either one selectable)
Manual revolving nosepiece / power revolving nosepiece (either one selectable)
150mm
220mm
1-axis coarse / fine feed, left and right handles (coarse feed: 10mm / revolution, fine feed: 0.1mm / revolution)
Telecentric system, adjustable aperture diaphragm, non-stepped brightness control, 12 V 50 W tungsten-halogen
lamp, built-in cooling fan
Koehler illumination (BF / BD), adjustable aperture diaphragm, non-stepped brightness control, fiber optic cable
cold light illumination
12 V 100 W halogen / 12 V 150 W halogen (either one selectable)
One GIF filter (for transmitted illuminator)
50 x 50mm
100 x 100mm
200 x 100mm
200 x 170mm
300 x 170mm
400 x 200mm
280 x 280mm
280 x 280mm
350 x 280mm
410 x 342mm
510 x 342mm
610 x 342mm
180 x 180mm
180 x 180mm
250 x 150mm
270 x 240mm
370 x 240mm
440 x 240mm
—
±5°(left)
±3°(left)
Model No.
BF
Without Z
(Bright-Field) Order No.
axis length
measurement BD (BF/DF) Model No.
Order No.
Model No.
BF
With Z
(Bright-Field) Order No.
axis length
measurement BD (BF/DF) Model No.
Order No.
Optical tube
Image
Observation method
Eyepiece (option) adjustable diopter
Bright-Field (BF)
Objective lens (option)
BF/DF (BD)
Bright-Field (BF)
Revolving nosepiece
(option)
BF/DF (BD)
Maximum target height
Focusing system
Focusing method
Transmitted light
Illumination unit
Reflected light
Filter for illumination
Measuring range
Top size
Effective stage glass size
Swiveling angle
Maximum loading
(on top of the glass)
Quick release mechanism
Zeroset switch
Stage
10kg
Length measuring system
Minimum reading
Display axis
Functions
Measuring accuracy*2 (X and Y axes: no load)
Maximum power consumption
External dimensions
(W x D x H)mm
Main unit
Weight
Specifications
Control box
Weight
Digital counter
*1: Patented in Japan
*2: The measurement method conforms to JISB7153.
20kg
15kg
X and Y axes (standard)
For X and Y axes (standard), (MF-UB and UD types features also for the Z axis)
High accuracy digital scale*1
Switchable between 1/0.5/0.1µm
X and Y axes (X, Y, and Z axes in MF-UB and UD types)
Zeroset, direction changeover, and RS-232C output
(2.5 + 0.02L) µm L: measuring length (mm)
150 W
562 × 730 × 667 562 × 730 × 667 624 × 745 × 667 632 × 892 × 782 682 × 892 × 782 757 × 907 × 782
65.5kg
69.5kg
130kg
138kg
144kg
Power ON / OFF switch, 100 to 120 VAC (5A fuse) / 220 to 240 VAC (2.5A fuse), GND terminal
2.0kg
Spare lamp (For transmitted illuminator): 12 V 50 W tungsten-halogen lamp No. 513667
A long-life lamp (No. 12BAB345) is also available, though the illumination intensity is slightly low.
(For reflected illuminator): 100 W light source: 12 V 100 W long-life type No. 517181, 12 V, 100 W high luminance type No. 12BAD602
150 W light source: 12 V 150 W long life type No. 12BAJ076, 12 V 100 W high luminance type No. 12BAJ075
External Dimensions Chart
261
261
(unit: mm)
356
356
125
171
125
604.5
247
562
204.5
667
782
171
231
231
360
268.5~368.5
551
355~455
360
124
281.5~431.5
745~795
MF-UB2010B
621
401~551
892~977
MF-UB3017B
13
124
Option Diagrams
Data operation
Counter data transfer
Counter data printing
Thermal printer DPU-414
02AGD600A
(Connecting cable included)
Vision Unit 6 359-663
(shipped with the main unit)
PC Transfer Program Optin
Note: Separate PC required.
QM-Data200
264-140
Foot switch
12AAA846
Focus pilot FP-05
375-055 (factory-set option)
RS-232C (crossing) cable
12AAA807 x 1
Note: 9-pin D-sub, female on
both edges
Thermal printer DPU414:
12AAD032 (Connecting cable
included)
FD unit : 12AAA799
Foot switch : 937179T
External printer (ESC/P) cable :
12AAA804
TV observation / image saving
MF B
RS-232C (crossing) cable
12AAA807
Note: 9-pin D-sub, female on
both edges
Real-time Process Control
Program MeasurLink
Inspection Table Creation
Program MeasureReport
Note: Separate PC required.
GIF filter (for light source)
12AAG806
External light source control cable
12AAD128
LB80 filter (for light source)
12AAG807
Note: Use this filter with a
twin fiber-optic illuminator in
combination with a circular fiberoptic illuminator.
Clamping device 176-107
V-block with clamp 172-378
Swivel center support 172-197
Stage-related
Digital rotary head (ø20 supported)
176-654
Ball end mill measurement system
(ø2.5 to 20.0mm) 359-655
Reticles
Optical tube
Binocular tube (eyepiece 10 x 2)
176-303-1
Eyepiece 10X 378-856-5 (1)
Eyepiece 15X
378-857 (2) / 378-857-5 (1)
Oblique reflected illumination
176-351-6
Note: Up to 10X is supported.
Eyepiece 20X
378-858 (2) / 378-858-5 (1)
Digital protractor eyepiece 10X
176-313
MF Series
Standard accessory
Required item
Objective lens
Slide type nosepiece
176-314-1 (factory-set option)
176-314-2 (factory-set option)
Rotary stage with fine feed knob
(graduated) 172-198
Stage adapter B
176-310
Main unit
Transmitted/reflected
illumination
GIF filter 12AAA645
LB80 filter 12AAA646
ML objective lens 1X
375-036-1
ND2 filter 12AAA643
ML objective lens 3X
375-037-1
ND8 filter 12AAA644
ML objective lens 5X
375-034-1
Rotary stage with fine feed knob
(graduated) 172-198
ML objective lens 10X
375-039
2017 / 3017 / 4020 size
Rotary stage with fine feed knob (B)
176-306
RS-232C (crossing) cable
RS-232C (crossing) cable
12AAA807 x 1
12AAA807 x 2
Note: 9-pin D-sub, female on
both edges
Image Synthesis Program
Power focus unit
VCPAK Microscope Edition
02AUF742
Note: Install this program into a
Digital color Vision PC.
Protractor eyepiece 10X
375-043
2010 size
Rotary stage with fine feed knob (A)
176-305
Digital color Vision DV Series
Calibration chart
02AKN020
LED circular illuminator (white)
176-367-1
Note: Up to 10X is supported.
505 / 1010 size
Rotary stage with fine feed knob (A)
176-305
Camera with C-mount specifications
Note: 2/3" or less
Power focus
Power focus unit
Fiber-optic circular illuminator
(100W) 176-366
Note: Up to 10X is supported.
0.5X TV adapter unit
375-054
Collet chuck set
A : 12AAG241
Image Synthesis Program
B : 12AAG242
C : 12AAG243
VCPAK Vision System Edition
D : 12AAG244
02AUF680
Note: Install this program into the PC for the Vision Unit Vision.
RS-232C (crossing) cable
12AAA807 x 1
Monocular tube (eyepiece 10 x 1)
Note: 9-pin D-sub, female on both edges
176-302
External reflected
illumination
Twin fiber-optic illumination
(100W) 176-343
C-mount
970441
ML objective lens 20X
375-051
Stage adapter A
176-304
ML objective lens 50X
375-052
Rotary stage with fine feed knob
(graduated) 172-198
ML objective lens 100X
375-053
Vibration damping stand
176-308
Mounting stand (microscope main unit +
QM-Data200) 176-309
Mounting stand (microscope main unit +
Vision Unit / DV Series) 960945
Lens cleaning kit
12AAA165
Stage micrometer
375-056
14
Data operation
Counter data transfer
Counter data printing
Real-time Process Control
Program MeasurLink
Inspection Table Creation
Program MeasureReport
Note: Separate PC required.
RS-232C (crossing) cable
12AAA807
Note: 9-pin D-sub, female on
both edges
Clamping device 176-107
V-block with clamp 172-378
Swivel center support 172-197
505 / 1010 size
Rotary stage with fine feed knob
(graduated) 172-198
2010 size
Stage adapter B
176-310
Rotary stage with fine feed knob
(graduated) 172-198
RS-232C (crossing) cable
RS-232C (crossing) cable
12AAA807 x 1
12AAA807 x 2
Note: 9-pin D-sub, female on
both edges
Image Synthesis Program
Power focus unit
VCPAK Microscope Edition
02AUF742
Note: Install this program into a
Digital color Vision PC.
15X Eyepieces 378-857 (pair)
Stage adapter A
176-304
Rotary stage with fine feed knob
(graduated) 172-198
Reticles
Optical tube
Polarization unit (BF/BD)
378-092
Differential interference unit
378-080...for 5X and 10X
378-079...for 20X
378-078...for 50X and SL20X
378-076...for 100X and SL50X
for SL80X
External light source control cable
12AAG888
MF-U Series
Standard accessory
Required item
Revolving nosepiece / objective lens
BF/DF (BD)
Bright-Field (BF)
Manual revolving nosepiece (BD)
(four holes) 176-211
Aligning parfocal manual revolving
nosepiece (BF) (four holes)
378-018
Power revolving nosepiece (BD)
(four holes) 176-210
FS objective lens conversion
adapter (used to mount the BF lens
onto the BD revolving nosepiece)
378-026-1
FS objective lens
BD Plan Apo Series
FS objective lens
BD Plan Apo SL Series
FS objective lens set D1
378-931
2017 / 3017 / 4020 size
Rotary stage with fine feed knob (B)
176-306
Digital color Vision DV Series
20X Eyepieces 378-858 (pair)
Digital rotary head (ø20 supported)
176-654
Rotary stage with fine feed knob (A)
176-305
Camera with C-mount specifications
Note: 2/3" or less
Fiber-optic illumination (150W)
176-316
Fiber-optic illumination (100W)
176-315
GIF filter (for light source)
12AAG806
Rotary stage with fine feed knob (A)
176-305
0.5X TV adapter unit
375-054
Calibration chart
02AKN020
Power focus
Power focus unit
LB80 filter (for light source)
External light source control cable
12AAG807
12AAD128
Note: Use this filter with a fiber-optic illumination (100W).
Stage-related
C-mount
970441
Image Synthesis Program
VCPAK Vision System Edition
02AUF680
Note: Install this program into the PC for the Vision Unit Vision.
RS-232C (crossing) cable
12AAA807 x 1
Note: 9-pin D-sub, female on both edges
10X Eyepieces 378-856 (pair)
External reflected
illumination
Twin fiber-optic illumination
(100W) 176-343
Thermal printer DPU-414
02AGD600A
(Connecting cable included)
Vision Unit 6 359-663
(shipped with the main unit)
PC Transfer Program Optin
Note: Separate PC required.
QM-Data200
264-140
Foot switch
12AAA846
Focus pilot FP-05U
375-065 (factory-set option)
RS-232C (crossing) cable
12AAA807 x 1
Note: 9-pin D-sub, female on
both edges
Thermal printer DPU414:
12AAD032 (Connecting cable
included)
FD unit : 12AAA799
Foot switch : 937179T
External printer (ESC/P) cable :
12AAA804
TV observation / image saving
MF-U B
FS objective lens set D2
378-932
FS objective lens set D3
378-933
15
Aligning power revolving
nosepiece (BF) (five holes)
378-116
Main unit
Transmitted/reflected
illumination
GIF filter 12AAA645
LB80 filter 12AAA646
FS objective lens
M plan apo Series
ND2 filter 12AAA643
FS objective lens
M plan apo SL Series
ND8 filter 12AAA644
FS objective lens
G plan apo Series
FS objective lens set B1
378-911
FS objective lens set B2
378-912
FS objective lens set B3
378-913
LED circular illuminator for FS
objective lens
Note: Up to 10X is supported.
Vibration damping stand
176-308
Mounting stand (microscope main unit +
QM-Data200) 176-309
Mounting stand (microscope main unit +
Vision Unit / DV Series) 960945
Lens cleaning kit
12AAA165
Stage micrometer
375-056
Lens Options
Naturally it is important that a user does not tire easily, even during lengthy periods of observation or measurement. Therefore these
microscopes incorporate ergonomic design features such as widefield eyepieces (field number 24 for a 10x lens) and good eye relief to
provide a relaxing view so that observation and measurement can be performed with minimal strain. Also, the standard objective lens series
is a low-flare design with a long working distance. The FS objective lens for both BF and BF/DF are plan apochromat.
Eyepieces
MF
MF
MF / MF-U
Eyepiece
WF10X /24 WF15X /16 WF20X /1
378-856-5 378-857-5 378-858-5
Order No. (1)
Order No. (pair)
378-856
378-857
378-858
Magnification
10X
15X
20X
Field number
24
16
12
Applicable model
MF B / MF-U B
Fixed
scale
Rotary scale
Vernier
*Eye shade comes with 10X models.
Beam
Digital Protractor Eyepiece
Order No.
Magnification
Field number
Beam
Vernier
Optical Tubes
Monocular Tube
Order No.
176-302
Magnification
10X
Field number
24
Applicable model MF B
Protractor Eyepiece
Order No.
375-043
Magnification
10X
Field number
21
Graduations
360° 5´
Applicable model MF B
Binocular Tube
Order No.
Magnification
Field number
Applicable model
176-303-1
10X
24
MF B
16
176-313
10X
18
90º solid line, 45º broken line (line width:
Eyepiece Reticle
5µm for both)
detection
Decimal degrees : 0.00º to ±369.99º
section
Measuring range
Degrees-minutes : 0º00´ to ±369°59´
Detection method
Electrostatic capacitance linear scale
External dimensions (mm) ø120 (OD) x 140 (D)
Minimum reading
0.01° (degree) or 1´ (arc-minute)
Zeroset, ABS/INC switching, decimal degree
/ degree-minute switching, direction
Digital
Functions
switching data output (The foot switch No.
counter
937179T is to be used at the same time)
(standard
RS-232C
accessory) External output
CE
External dimensions (mm) 143 (W) × 112 (D) × 57 (H)
Power supply
100 to 120VAC
Applicable model
MF (can be fixed on the top of the counter.)
Tilting Binocular Tubes
Magnification
10X
Field number
24
Angle of column
0 to 30°
(tilted angle)
Applicable model Standard accessory for MF-U B
High resolution and long working distance of the objective lens are important factors promoting ease of operation when a microscope is
used for inspection, observation or measurement. To obtain a clear image across the view field, apochromat specifications where chromatic
aberration is compensated (compensation of red, blue, and yellow wavelengths) over a wide range of visible light are important, as are plan
specifications where image surface warp, point aberration and other elements are compensated. FS objective lenses are high performance
objective lenses combining these factors. This series has expanded the application range of microscopes and significantly improved ease of
operation. M Plan Apo Series are lenses for BF observation using visible light. BD Plan Apo Series can be used for BF and DF observation.
SL (Super Long) specifications are useful when a longer working distance is required. G Plan Apo Series are lenses that enable observation
through glass. Glass thickness is compensated for 3.5mm (2 to 5mm custom designs are available).
ML Objective Lenses
Limited correction optical system...for MF B
Model No. Order No.
ML 1X
ML 3X
ML 5X
ML 10X
ML 20X
ML 50X
ML 100X
FS Objective Lenses
Unlimited correction optical system...for MF-U B
For Bright-Field (BF) observation and measurement
For BF/DF (BD) observation and measurement
17
Magnification
N.A.
1X
3X
5X
10X
20X
50X
100X
0.03
0.09
0.13
0.21
0.42
0.55
0.70
375-036-1
375-037-1
375-034-1
375-039
375-051
375-052
375-053
Model No.
Order No.
M Plan Apo 1X
M Plan Apo 2X
M Plan Apo 5X
M Plan Apo 10X
M Plan Apo 20X
M Plan Apo 50X
M Plan Apo 100X
M Plan Apo SL 20X
M Plan Apo SL 50X
M Plan Apo SL 80X
M Plan Apo SL 100X
M Plan Apo SL 200X
M Plan Apo HR 50X
M Plan Apo HR 100X
G Plan Apo 20X (t3.5)
G Plan Apo 50X (t3.5)
Lens set B1
Lens set B2
Lens set B3
FS objective lens
conversion adapter
378-800-3
378-801-3
378-802-3
378-803-3
378-804-2
378-805-3
378-806-3
378-810-3
378-811-3
378-812-3
378-813-3
378-816-3
378-814-4
378-815-4
378-847
378-848-3
378-911
378-912
378-913
Working Distance
Depth of
(mm)
Focus ± (µm)
1X
0.025
11.0
440
2X
0.055
34.0
91
5X
0.140
34.0
14
10X
0.280
33.5
3.5
20X
0.420
20.0
1.6
50X
0.550
136.0
0.9
100X
0.700
6.0
0.6
20X
0.280
30.5
3.5
50X
0.420
20.5
1.6
80X
0.550
15.0
1.1
100X
0.700
13.0
0.9
200X
0.620
13.0
0.7
50X
0.750
5.2
0.48
100X
0.900
1.3
0.34
20X
0.280 Air conversion 29.42
3.5
50X
0.500 Air conversion 13.89
1.1
Set of M Plan Apo 10X, 20X, 50X, and 100X
Set of M Plan Apo 2X, 5X, 10X, and SL20X
Set of M Plan Apo 5X, 10X, 20X, and 50X
Used when setting the Bright-Field BF lens onto the BF/DF
BD revolving nosepiece.
Magnification
378-026-1
Model No.
Order No.
BD Plan Apo 2X
BD Plan Apo 5X
BD Plan Apo 10X
BD Plan Apo 20X
BD Plan Apo 50X
BD Plan Apo 100X
BD Plan Apo SL 20X
BD Plan Apo SL 50X
BD Plan Apo SL 80X
BD Plan Apo SL 100X
BD Plan Apo HR 50X
BD Plan Apo HR 100X
Lens set D1
Lens set D2
Lens set D3
378-831-5
378-832-5
378-833-5
378-834-4
378-835-5
378-836-5
378-840-5
378-841-5
378-842-5
378-843-5
378-845
378-846
378-931
378-932
378-933
Working
Depth of
Distance (mm) Focus ± (µm)
61
306
77
34
61
23
51
6.2
20
1.6
13
0.9
6
0.6
N.A.
Working
Depth of
Distance (mm) Focus ± (µm)
2X
0.055
34.0
91
5X
0.140
34.0
14
10X
0.280
34.0
3.5
20X
0.420
20.0
1.6
50X
0.550
13.0
0.9
100X
0.700
6.0
0.6
20X
0.280
30.5
3.5
50X
0.420
20.0
1.6
80X
0.500
13.0
1.1
100X
0.550
13.0
0.9
50X
0.750
5.2
0.48
100X
0.900
1.3
0.34
Set of BD Plan Apo 10X, 20X, 50X, and 100X
Set of BD Plan Apo 2X, 5X, 10X, and SL20X
Set of BD Plan Apo 5X, 10X, 20X, and 50X
Magnification
N.A.
Illumination Options
Using illumination effectively is key to clearly observing and measuring a variety of targets such as semiconductors, electrical and electric
parts, automobile precision parts, plastic molding, tools, medical products, and documents with a high image contrast. Choose the
illumination best suited to the form, surface status, color, material of the target.
Printed wiring
HDD suspension
HDD suspension
Printed wiring
C : LED Circular Illuminator
A : Vertical Illumination
This illuminator circularly emits LED light from the periphery of the objective lens and
features a high luminance, long lifetime*, and low power consumption. As high image
contrast is achieved, especially when a dark
colored plastic, PCBs, and small cylinders
are observed, this is also suitable for image
measurement.
*Note that lifetime will be shortened if the
maximum illumination intensity is always set.
This vertically illuminates the target surface through the objective lens.
MF: standard halogen illumination, MF-U: fiber halogen illumination
Black plastic
molded product
A C
IC circuit
B : Fiber-Optic Circular Illuminator
D
This illuminator circularly emits halogen light from the periphery of the objective
lens, enabling observation with minimal shading. With a high color reproducibility,
this type of illumination is suitable for image measurement as well.
B
D : Twin Fiber-Optic illuminator
This illuminator, which obliquely emits halogen light from two
directions, is best suited to three-dimensional observation. A
condenser lens, which enables a high luminance spot illumination,
is standard equipment with
this illuminator.
†The images in the four corners of the overall figure are of
the same section of printed wiring.
Flexible substrate
Printed wiring
IC package
Electronic parts
Garnet
Printed wiring
Images on this page are digital images, so they differ somewhat from the actual images.
150 W fiber-optic illumination
18
100 W/150 W Fiber Illuminator (external light source specifications)
Order No.
176-315 (100W) 176-316 (150W)
12 V 100 W tungsten-halogen lamp (No. 517181), rated life: 1000hrs.
100W
12 V 100 W high luminance tungsten-halogen lamp (No. 12BAD602), rated life: 50hrs.
Non-stepped brightness control
External
76 (W) x 235 (D) x 120 (H), glass fiber cable length: 1500
dimensions (mm)
12 V 150 W tungsten-halogen lamp (No. 12BAJ076), rated life: 500hrs.
150W
12 V 150 W high luminance tungsten-halogen lamp (No. 12BAJ075), rated life: 50hrs.
Non-stepped brightness control
External
120 (W) x 273 (D) x 119 (H), glass fiber cable length: 1500
dimensions (mm)
Applicable model Option required by MF-U B (for vertical reflected illumination)
Fiber-Optic Circular Illuminator (external light source
specifications)
Order No.
176-366
Non-stepped brightness control
Auto-brightness control when the Vision Unit system is
used (a separate No. 12AAD128 cable is required.)
12 V 100 W tungsten-halogen lamp (No. 517181),
rated life: 1000hrs.
12 V 100 W high luminance tungsten-halogen lamp (No.
12BAD602), rated life: 50hrs.
LB80 filter (No. 12AAG807)
External
76 x 235 x 120 (light source section only)
dimensions
OD : ø60, ID : ø35 (circular illuminator section)
(W x D x H)mm Fiber length: 1000
Applicable model MF B (ML objective lens 10X or less)
Oblique Reflected Illuminator
176-351-6
Order No.
Oblique illumination using the reflected illumination
light source in the microscope main unit
Equipped with non-stepped brightness control
and condenser lens.
12V50W (No.513667)
Applicable model MF B (ML objective lens 10X or less)
LED Circular Illuminator
Order No.
176-367-1
Non-stepped brightness control
75 x 150 x 90 (control section only)
External
OD: ø70, Overall length: 68 to 93
dimensions
(circular LED section)
(W x D x H)mm
LED cable length: 1500
Applicable model MF B (ML objective lens 10X or less)
MF-B3017B + Circular LED Illumination
Twin Fiber-Optic Illuminator (external light source specifications)
Order No.
176-343
Fixed to the back of microscope column. Equipped with
a non-stepped brightness control and condenser lens.
12 V 100 W tungsten-halogen lamp (No. 517181),
rated life: 1000hrs.
12 V 100 W high luminance tungsten-halogen lamp
(No. 12BAD602), rated life: 50hrs.
LB80 filter (No. 12AAG807)
External
76 x 235 x 120 (light source section only)
dimensions
Fiber length: 700 (from the back fixture to the tip)
(W x D x H)mm Maximum fiber bend R: R60
Applicable model MF B / MF-U B
19
LED Circular Illuminator (for FS objective lens)
Order No.
Contact us.
Fixed to the objective lens. Circularly
emits white LED light.
Non-stepped brightness control
75 x 150 x 90 (control section only)
External
OD: ø70, Overall length: 65 to 80
dimensions
(circular LED section)
(W x D x H)mm
LED cable length: 1000
Applicable
MF-U B (FS objective lens M Plan Apo
model
10X or less)
Image Measurement Option
Vision Unit
Measurement results can be instantly displayed by specifying the desired command from various options based on the digital counter output
on the microscope main unit. Highly versatile electronic and image measurement functions, where image processing is used to align edges,
are available. The measurement results can be printed and output to a spreadsheet application or inspection table.
Vision
Unit
Features
MF-B1010B + Vision Unit
† Automatic edge detection tool that enables instant measurement and a
variety of macro types
† Graphics and measurement navigation function that supports easy operation
† Measurement results can be output to MS-Excel*, and an inspection table can
be created using the same personal computer.
† Tolerance zone measurement and per-item statistical processing
† Auto-brightness control function that exactly reproduces illumination settings
(when the MF B and MF-U B measuring microscopes are used at the same time)
† High accuracy height measurement is possible with the aid of the
focus pilot
† Measurement within a single screen image
† Functions to input and save images
* MS-Excel is a registered trademark of Microsoft Corporation.
Instant Manual Measurement
The CCD camera integrated into the microscope automatically detects the edge of the target and instantly displays operation results if
the edge is within the video screen.
In addition to fewer edge alignment errors, higher repeatability and reduction of measurement time, simultaneous monitoring of
measured points is also possible.
Example of internal diameter measurement
One-Click circle tool
(1) Display the target to be measured in the video
window and adjust illumination and focus on
the main unit of the measuring microscope.
Specifications
Vision Unit
Order No.
Optical magnification
Image detection
Monitor display magnification
Maximum resolution
Measuring accuracy at each axis*1
(measurement temperature: 20˚C)
(2) Select the measurement function “Circle
Measurement” from the function window
and the edge detection tool “One-Click Circle
Tool” from the tool window.
(3) Click on the edge of the target hole once:
the edge is automatically detected and the
measurement process started.
359-698/359-699
0.5X when installed into the microscope (with the 0.5X TV adapter)
High-sensitivity 1 / 3" CCD color camera
About 21X (About 63X with the objective lens 3X, Image range: 3.1 x 2.3mm)
0.1µm
Depends on the accuracy of measuring microscope.
Depends on the accuracy of measuring microscope.
Repeatability*2
Reference: Repeatability on a single screen (Mitutoyo reference samples were used.)
(measurement temperature:
With 3X objective lens: 3σ = ± 2.5µm or less
20˚C)
With 10X objective lens: 3σ = ± 1.0µm or less
PC system
Pentium4, WindowsXP
Software
QS PAK Visionunit Edition V1.0
Maximum power consumption 460 W
Applicable model
MF B/MF-U B
20
(4) Measurement results are displayed.
Data Processing Option
QM-Data200
QM-Data200
Features
† Supports two-dimensional measurement work with a variety of graphic
display functions that take advantage of a large LCD screen.
† Frequently used combined measurement (such as center-to-center
measurement between two circles) can be performed with a single key
operation from the key panel.
† AI measurement function (to automatically identify measured elements)
† Measurement procedure teaching function and measuring point
navigation function in the repeat mode
† User menu function by which measurement commands specific to
users and part programs can be stored and saved.
† Measurement procedures and results can be stored on floppy disks
using an optional FDD unit.
† Tolerance zone measurement of measurement operation results and
per-item statistical processing
† Measurement results can be output to MS-Excel* in CSV format.
† Stand with tilt mechanism
* MS-Excel is a registered trademark
† Measurement is possible while printing data. of Microsoft Corporation.
MF-UB1010B + QM-Data200
Specifications
QM-Data200 (stand type)
Order No.
Display language
Measurement units
Maximum resolution
Program function
Statistical processing
Element memory capacity
Element recall
Element key entry
Display unit
ABS
LAF (laser AF)
Input connector
Output connector
Measurement result file output
Power supply
Maximum power consumption
External dimensions (mm)
Weight
Applicable model
Standard accessory
External
Dimensions
196
264-140
Seven languages supported (Japanese, English, German, French, Italian, Spanish, and Portuguese)
*Chinese and Korean models are also available.
Length: mm, angle: degrees or degree/arc-minute/arc-second (switchable)
0.1µm
Creation, execution, and editing of measurement procedures
Measurement item, number of data, maximum value, minimum value, average, standard deviation, range, histogram
Up to 1000 elements
Point, line, circle, distance, ellipse, rectangular hole, slotted hole, intersection and intersecting angle
Point element, line element, circle element
Monochrome graphic LCD (320 x 240 dots, backlight)
Not supported
Not supported
(1) RS-232C2: to connect the counter of the microscope main unit
(2) X, Y, Z: linear scale input (for counter-less type)
(3) OPTOEYE: optoeye edge signal (for optoeye M2 connection) Note: Usable only when linear scale input is used.
(4) FS: to connect the foot switch
(1) RS-232C1: to connect a personal computer (measurement result)
(2) PRINTER: to connect the receipt/external printer (measurement result)
(3) FD: to connect the FDD unit (measurement result file and measurement procedure file)
RS-232C output (CSV format, MUX-10 format)
100 VAC 50/60 Hz (using AC adapter)
24 W (not including options)
About 260 (W) x 242 (D) x 310 (H) (including the stand section)
About 2.2 kg
MF B/MF-U B
AC adapter and power cable
Print example of DPU-414
thermal printer
30°
(unit: mm)
310
50°
260
210
242
Print example of receipt printer
21
Image and Vision Analysis Options
The Digital color Vision DV Series digital color image system can meet the needs of customers who want to easily take and save microscope images.
High-definition images can be saved in a file and a quick measurement function that can be used within a single screen image is also
available. We also offer VCPAK with which an omnifocal image focusing on the whole view field can be generated, even with a lens having
a shallow depth of focus, and transferred to a 3D display.
Features
DV Series Digital color Vision
† 50-, 210-, and 520-megapixel digital cameras are available.
† High-speed image filing and manual quick measurement function
† High image quality and almost real-time follow-up
† Direct C-mount non-vignetting design
DV Series Digital color Vision
Model No.
Order No.
Type and size
DV-210
DV-50
176-384
176-380
Color CCD
Color CMOS
1 / 2"
1 / 3"*1
Diagonal length (mm)
8
6
About 33X
About 40X
Monitor display magnification*2
About 210
About 50
Total pixel count
megapixels
megapixels
Lens mount
C-mount
Image filing
Supported
Ultra-fine electric cross line
Supported
Major functions
Manual quick measurement
Supported
Scale and comment display
Supported
OS
Windows XP®
PC system
Optical drive
CD-RW (writing software included)
Monitor*Note
17" high-definition LCD
*1: The DV-50 employs the CMOS image sensor, so the image might jiggle during shooting.
*2: Display magnification for 17" CRT. A margin is displayed at the lower right on the screen in
the case of the DV-50 (standard screen display setting of 800 x 600).
Note: Digital color Vision DV Series is confirmed and guaranteed with the DELL PC system
(Windows XP). Note that image capturing is not guaranteed in other PC systems. The
configuration of the PC system is subject to change. Please check in advance.
† Windows is a registered trademark of Microsoft Corporation.
MF-UB1010B + DV520L
DV-520
176-382
Color CCD
2 / 3"
11
About 30X
About 524
megapixels
VCPAK Image Synthesis Program
LCD color filter
LSI circuit
Features
† Image generation program focusing on the whole microscope view field (omnifocal)
† Images can be captured by only pressing the capture button on the monitor
(The motor-driven automatic input function can be integrated into the system.)
† Zooming in/out and rotating 3D* images is possible with the mouse and
the images can be saved in BMP format.
*Supported by 3-axis MF B or MF-U B.
† Analysis of bumps, solder balls, IC pattern circuits, LCD electrodes, steps on
painted film, powders and other targets
Images on this page are digital images, so they
differ somewhat from the actual images.
Tip of connector pin
LSI
22
BGA
Optional Accessories
We offer options that support the ease of operation of measuring microscopes. A focus pilot that reduces the dispersion of the focusing
point, power revolving nosepiece and power focus unit that enable changing magnification and focusing by hand, a digital rotary head which
digitally measures angles, a rotary table with a fine feed wheel enabling smooth rotational movement of the target, and other options are highly
developed. Choose options such as polarization and differential interference contrast units which support metallographic microscope observation,
TV port adapter for setting the camera required for multiple users to simultaneously perform analysis and evaluation according to the application.
Mounted onto the TV port of the
microscope main unit as an addon function, the focus pilot can
detect the focus point with high
accuracy and reproducibility.
Adjustment of the brightness
of the focus pattern is possible
according to the surface
condition, material, and other
characteristics of the target.
The internal 0.5X optical system
enables a wide field of view on
the TV monitor. (A separate CCD
camera needs to be mounted.)
Note: Combination of MF-U B and
FP-05U is a factory-fit option.
This is mounted onto
the left Z axis handle of
the main unit. Fine feed
focusing using the remote
power jog dial and sevenspeed coarse feed focusing
using the jog shuttle are
available.
Focus Detection Unit Focus Pilot
Model No.
FP-05
FP-05U
Order No.
375-055
375-065 (factory-set option)
Mounted onto the TV camera port of the microscope main unit, the focus
pilot can detect the focus point with high accuracy and reproducibility.
An internal 0.5X optical system enables a wide field of view on the TV
monitor. (A separate CCD camera needs to be used.)
†Concentric circle pattern †Slit pattern
Power Focus Unit
Digital Rotary Head
Order No.
176-654
A unit that digitally displays the rotation
angle. Angle indexing supported.
Digital angle display 0.1˚/1˚ (switched); Accuracy is not guaranteed.
Manual (amount of head rotation: 0.5
Rotation drive
rotation per one handle rotation)
ø2.5 to ø20.0
Collet capacity (mm)
Note: The collet chuck is optional.
Power supply
100 to 120, 220 to 240 VAC 50/60Hz
External
160 (W) x 220 (D) x 88 (H)
dimensions (mm)
Applicable model MF B
• The point where either of the above patterns matches between the
upper and lower parts is the focus point.
• A pattern can be selected and the brightness can be adjusted according
to the surface characteristics of the target.
Focus reproducibility About 1.5µm (with 20X lens); reference value measured by Mitutoyo using samples
Optical magnification 0.5X
Magnification accuracy ±0.1% (within 2/3 from the center of the view field)
Camera
Up to 2/3" are supported
TV adapter
C-mount and centering/parfocal adjustment mechanism
Power supply
100 V to 240 VAC, maximum power consumption about: 20 W
External dimensions Main unit section: 131 (H)
(mm)
Console box: 90 (W) x 78 (H) x 178 (D)
Applicable model
MF B
MF-U B
Collet Chuck Set
Set A (No.12AAG241)
Set B (No.12AAG242)
Set C (No.12AAG243)
Set D (No.12AAG244)
Applicable model
This is an electrically driven
revolving nosepiece to be
mounted onto the MF-U Series.
The objective lens can be
specified using the remote
console box. The centering
mechanism is standard
equipment for the Bright-Field BF
model only.
Collet capacity: 2.5 to 5.0mm
Collet capacity: 5.5 to 10.0mm
Collet capacity: 10.5 to 15.0mm
Collet capacity: 15.5 to 20.0mm
MF B
Note: External lighting cannot be used with this product.
Power Revolving Nosepiece
Order No.
378-116(Bright-Field BF model) 176-210(BF/DF BD model)
Electric drive revolving nosepiece mounted onto MF-U B
The objective lens can be switched by hand.
Objective lens mounting 5 (with the centering mechanism) 4
View field adjustment range ±0.5mm
None
Driving means
DC motor
Power supply
100 V to 240 VAC, maximum power consumption about 20 W
Main unit section: 164 (W) x 65 (H) x 137 (D)
External dimensions
(mm)
Console box: 108 (W) x 72 (H) x 193 (D)
Applicable model
MF-U B
Slide Type Nosepiece
Order No.
176-314-1 (factory-set option)
The lens of centering mechanism (reference) hole and that of focus adjusting
mechanism hole are parfocal.
Note: The magnification of focus adjusting function hole is not guaranteed.
Order No.
176-314-2 (factory-set option)
The magnification of the lens of the centering mechanism (reference) hole
and that of the focus adjusting mechanism hole are guaranteed.
Note: The two lenses are not parfocal.
Applicable model MF B
23
Optional Accessories
We offer a variety of options for more efficient observation and measurement. We support ease of operation of measuring microscopes with a
rotary table which has a fine feed wheel that enables smooth rotational movement of the target, a vibration damping stage which is essential
for high magnification observation and measurement, polarization and differential interference contrast units to broaden the choice of surface
observation, TV port adapters which are or CCD camera observation as well as view field observations and measurements, and other options.
Rotary table with fine feed wheel (A)
176-305
Order No.
280 (W) x 280 (D) x 24 (H) mm
External
dimensions (mm) Table top: ø240mm, 360˚ rotation, no angle reading
Weight
5.5kg
Effective glass
ø183
size (mm)
Applicable model 505 / 1010 / 2010 size (MF B/MF-U B)
Note: The V-block with clamp, swivel center, and adjustable
clamp can be fixed onto the table.
V-Block with Clamp
Order No.
172-378
Maximum supportable diameter: ø25mm
High from the mounted surface to the
center: 38 to 48mm
External
117 (H) x 90 (W) x 45 (D) mm
dimensions (mm)
Weight
0.8kg
MF B / MF-U B
Applicable
Note: Use stage adapter B for the 2010 size
model
model. Use stage adapter A for the 2017,
3017 and 4020 size models.
Vibration damping stand
Order No.
176-308
Supporting
Spring pad
Maximum loading
200kg
External dimensions (mm) 750 (W) x 550 (D) x 36 (H) mm
Weight
36kg
Applicable model
MF B / MF-U B
Rotary table with fine feed wheel (B)
176-306
Order No.
342 (W) x 342 (D) x 23 (H) mm
External
dimensions (mm) Table top, ø410mm, 360˚ rotation, no angle reading
Weight
6.5kg
Effective glass
ø240
size (mm)
Applicable model 2017 / 3017 / 4020 size (MF B / MF-U B)
Note: The V-block with clamp, swivel center, and adjustable
clamp cannot be fixed onto the table.
Swivel Center
Order No. 172-197
Can be tilted within ±10˚, minimum angle reading: 1˚
Most appropriate for measurement screws and
other items
Maximum supportable size: 80 x 140mm when horizontal
Maximum supportable size: 65 x 140mm when tilted by 10˚
Weight 2.5kg
MF B / MF-U B
Applicable
Note: Use stage adapter B for the 2010 size model. Use
model
stage adapter A for the 2017, 3017, and 4020 size.
Rotary table with fine feed wheel (graduated)
172-198
Order No.
External
240 (W) x 172 (D) x 19.7 (H) mm, table top
dimensions
T-slot pitch: 120 Table top: ø146mm, 360˚
(mm)
rotation, minimum angle reading vernier: 2´
Weight
2.5kg
Effective glass
ø94
size (mm)
MF B / MF-U B
Applicable
Note: Use stage adapter B in for the 2010
model
size model. Use stage adapter A for the
2017, 3017, and 4020 size models.
Note: The V-block with clamp, swivel center, and adjustable
clamp can be fixed onto the table.
Adjustable Clamp
Order No.
Maximum clamp
length (mm)
External dimensions (mm)
Weight
Applicable model
Mounting Stand (for microscope main unit)
Order No.
176-309
Maximum loading
300kg
External dimensions (mm) 1200 (W) x 900 (D) x 650 (H) mm
Weight
About 50 kg
Applicable model
MF B / MF-U B
Note: We recommend the large-sized mounting stand (960945)
having external dimensions of 1800 (W) x 900 (D) x 740 (H)
when integrating the Vision Unit and digital color vision into the
microscope main unit.
24
176-107
35
62 (H) x 152 (W) x 38 (D) mm
0.4kg
MF B / MF-U B
Note: Use stage adapter B for the
2010 size model. Use stage adapter
A for the 2017, 3017, and 4020 size.
Stage Adapter A/B
Order No.
A : 176-304 / B : 176-310
External
50 (W) x 340 (D) x 15 (H)
dimensions, one Note: The depth of adapter B is 280mm.
piece (mm)
Weight
A : 1.5kg / B : 1.2kg
Applicable model MF B / MF-U B
Note: One pair in a set
Polarization Unit
378-092(common to BF and BF/DF)
Order No.
Polarizer and analyzer one each per set.
Applicable
MF-U B
model
Differential Interference Units
378-080 (for 5X and 10X)
378-079 (for 20X)
Order No.
378-078 (for 50X and SL20X)
378-076 (for 100X, SL80X, and SL50X)
Applicable model MF-U B
Note: Use the polarization unit at the same time.
Illumination Filters
For the light source
in the microscope
main unit*
C-Mount
Order No.
For the light
source of reflected
illumination (for
100 W fiber-optic
illumination)
970441
Standard adapter used to mount
a digital camera or other device
onto the TV camera port of the
microscope main unit.
Note: Not used when an Vision
Unit is mounted.
External
ø45×22.5 (H)
dimensions (mm)
Applicable model MF B / MF-U B
DPU-414 Thermal Printer
QM-Data200
connected
Order
No.
Counter display
printing
Printing method
Characters per line
Printing speed
External dimensions
Standard accessories
Paper for printer
Optional
ESC / P printer cable
GIF filter
LB80 filter
ND2 filter
ND8 filter
12AAA645
12AAA646
12AAA643
12AAA644
GIF filter
12AAG806
LB80 filter
12AAG807
*MF B (common to transmitted and reflected illumination) /
MF-U B (transmitted illumination only)
0.5X TV Adapter (with C-Mount)
Order No.
375-054
Standard adapter used to mount a digital
camera or other device onto the TV camera
port of the microscope main unit.
0.5X reduction relay image enables wide
field observation.
Magnification accuracy: ± 0.1%, image
view field: ø11mm
Note: Supplied as standard with the Vision Unit.
External
ø45×123 (H)
dimensions (mm)
Applicable
MF B / MF-U B
model
Manufactured by SII
12AAD032
02AGD600A Note: Use foot switch No. 12AAA846
at the same time.
Dot-matrix thermosensitive paper
40 (normal characters 9 x 7 dot matrix)
52.5 characters / s max. (normal character)
160mm (W) x 170mm (D) x 65.5mm (H), (printer main unit)
Printer cable, one paper roll, AC adapter (for 100 V)
No.908353 (5 rolls)
No.12AAA804 (2 m), 24-pin, color / monochrome support
Positive type
graduations
Negative type
graduations
Stage micrometer
Order No.
375-056
Scale graduation 1mm
Minimum
0.01mm
graduation
Scale accuracy
1 + L (µm), L: length between any two
(20˚C)
lines (mm)
Graduations
Negative/positive type
External
76 (W) x 26 (D) mm
dimensions (mm)
Weight
16g
Applicable model MF B / MF-U B
Note: Mitutoyo supports calibration after purchase. For details,
contact your nearest sales office.
Lens Cleaning Kit
Order No. 12AAA165
Dedicated to eyepiece and objective
lens maintenance
Set of cleaner, cloth, blower, cotton
wads, and other items
MF B (common to transmitted
Applicable
and reflected illumination)/MF-U B
model
(transmitted illumination only)
25
Optional Accessories
Reticles
For MF-U B
For MF B
No.12AAG836 (MF B)
No.12AAG877 (MF-U B)
90˚ broken line
Broken line pitch: 0.2 to 0.2
Line width: 5µm
No.12AAG838 (MF B)
No.12AAG878 (MF-U B)
90˚ broken line
Broken line pitch: 0.2 to 0.2
Line width: 7µm
No.12AAG842 (MF B)*1
Cross hairs graduated line
0.1 / 20mm
Line width: 7µm
No.12AAG873 (MF B)
No.12AAG876 (MF-U B)
90˚ broken line
Broken line pitch: 0.2 to 0.2
Line width: 3µm
No.12AAG843 (MF B)*1
Concentric circles with cross hairs
ø1.2 to ø18
Line width: 7µm
No.12AAG839 (MF B)
No.12AAG879 (MF-U B)
90˚ solid line, 45˚ broken line
Broken line pitch: 0.2 to 0.2
Line width: 5µm
No.12AAG840 (MF B)
No.12AAG880 (MF-U B)
90˚ solid line, 60˚ broken line
Broken line pitch: 0.2 to 0.2
Line width: 5µm
No.12AAG841 (MF B)
No.12AAG881 (MF-U B)
Zeiss pattern
Broken line pitch: 0.2 to 0.2
Line width: 5µm
No.12AAG844 (MF B)*1
Graduated line
0.1/10mm
Line width: 10µm
No.12AAG845 (MF B)*1
Graduated line
0.05/5mm
Line width: 10µm
No.12AAG846 (MF B)*1
Grid
1mm 1mm, 10mm 10mm
Line width: 10µm
26
Each reticle is supplied with a mounting bracket.
*1: To be used with the eyepiece 10X.
*2: Comparison chart for ML 3X objective lens. To be used with 10X eyepiece.
No.12AAG847 (MF B)*2
Metric coarse screw thread
P = 0.25 to 1.0
Line width: 7µm
No.12AAG848 (MF B)*2
Metric coarse screw thread
P = 1.25 to 2.0
Line width: 7µm
No.12AAG849 (MF B)*2
Involute gear reference rack
m = 0.1 to 1.0, pressure angle: 14.5˚
Line width: 7µm
No.12AAG850 (MF B)*2
Involute gear reference rack
m = 0.1 to 1.0, pressure angle: 20˚
Line width: 7µm
No.12AAG851 (MF B)*2
Unified coarse screw thread
80 to 28
Line width: 7µm
Reticle for Digital
Protractor Eyepiece
(standard)
No.12AAG852 (MF B)*2
Unified coarse screw thread
24 to 14
Line width: 7µm
No.12AAG853 (MF B)*2
Unified coarse screw thread
13 to 10
Line width: 7µm
No.12AAG854 (MF B)*2
Concentric circles with cross hairs
0.01“ to 0.20“
Line width: 7µm
27
90˚ solid line, 45˚ broken line
Broken line pitch: 0.2 to 0.2
Line width: 5µm
Coordinate Measuring Machines
Vision Measuring Systems
Form Measurement
Optical Measuring
Sensor Systems
Test Equipment and
Seismometers
Digital Scale and DRO Systems
*For detailed information, contact your nearest Mitutoyo Sales Center.
Small Tool Instruments and
Data Management
Mitutoyo Corporation
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other
technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights.
The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. Only quotations submitted by ourselves
may be regarded as definitive.
Our products are classed as regulated items under Japanese Foreign Exchange and Foreign Trade Law. Please consult us in advance if you wish to export our products to
any other country. If the purchased product is exported, even though it is not a regulated item (Catch-All controls item), the customer service available for that product
may be affected. If you have any questions, please consult your local Mitutoyo sales office.
20-1, Sakado 1-Chome,
Takatsu-ku, Kawasaki-shi
Kanagawa 213-8533, Japan
T +81 (0)44 813-8230
F +81 (0)44 813-8231
http://www.mitutoyo.co.jp
078 0611 7 C (KN) FP, Printed in Japan
Our products are classed as regulated items under Japanese
Foreign Exchange and Foreign Trade Law. Please consult us in
advance if you wish to export our products to any other country.
If the purchased product is exported, even though it is not a
regulated item (Catch-All controls item), the customer service
available for that product may be affected. If you have any
questions, please consult your local Mitutoyo sales office.