Dell C3760DN Color Laser User`s guide

Dell™ C3760n/C3760dn Color
Laser Printer
User's Guide
Regulatory Model: C3760dn/C3760n
Contents
Before Beginning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A Notes, Cautions, and Warnings . . . . . . . . . . . . . . . . . . . . . . 17
1
Dell™ C3760n/C3760dn Color Laser Printer User's Guide
Conventions .
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Finding Information
3
4
19
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
Product Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
About the Printer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
Front and Rear View
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
Front View .
Rear View
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
Space Requirements
Operator Panel
Additional Components.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
Non-bundled Items
Securing the Printer
Ordering Supplies
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Accessories
Setting up the Printer (Printer Setup) . . . . . . . . . . . . . . 33
5
Preparing Printer Hardware
Removing Tape
Template Last Updated - 2/7/2007
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents
35
35
1
6
Installing Optional Accessories .
Installing the Optional Memory Module
. . . . . . . . . . . . . . . . . . . . . . .
Installing the Optional 550-Sheet Feeder.
39
. . . . . . . . . . . . . . . . . . . . . .
42
. . . . . . . . . . . . . . .
44
. . . . . . . . . . . . . . . . . . . . . .
47
. . . . . . . . . . . . . . . . . . . . . . . .
48
Updating Your Driver to Detect 550-Sheet Feeder.
Installing the Optional Wireless Adapter
Installing the Wireless Adapter Using Video Instructions (Recommended)
Installing the Optional Wireless Adapter
. .
48
. . . . . . . . . . . . . . . . . . . .
49
Determining the Wireless Network Settings
Configuring the Optional Wireless Adapter
. . . . . . . . . . . . . . . . . .
50
. . . . . . . . . . . . . . . . . . . . .
51
Using Wizard Setup to Configure a Wireless Adapter
. . . . . . . . . . . . .
53
. . . . . . . . . . . . . . . . . . . . . . . . .
57
. . . . . . . . . . . . . . . . . . . . . . . . . .
58
Reconfiguring the Wireless Setting
Updating Your Driver to Detect Hard Disk .
7
Connecting Your Printer
66
66
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
Setting the IP Address
Assigning an IP Address
71
. . . . . . . . . . . . . . . . . . . . .
71
. . . . . . . . . . . . . . . . . . . . . . . .
71
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
72
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
73
When Using the Tool Box
Verifying the Settings Using Operator Panel
. . . . . . . . . . . . . . . . . .
Verifying the Settings Using Printer Settings Report
Verifying the Settings Using Ping Command
Contents
68
71
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When Using the Operator Panel .
Verifying the IP Settings
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
When Using the Easy Setup Navigator
2
65
. . . . . . . . . . . . . . . . . . . .
Setting Initial Settings on the Operator Panel
8
60
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network Connection .
Turning on the Printer .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Printer to Computer or Network .
Direct Connection
51
. . . . . . . . . . .
Using Advanced Setup to Configure a Wireless Adapter .
Installing the Optional Hard Disk .
37
. . . . . . . . . . . . . . . .
Updating Your Driver to Detect Memory Module
Verifying the Contents of the Box
37
. . . . . . . . . . . . . . . . . . . .
73
. . . . . . . . . . . . . .
73
. . . . . . . . . . . . . . . . . .
73
Template Last Updated - 2/7/2007
9
Loading Paper
10 Installing Printer Drivers on Windows ® Computers
Identifying Printer Driver Pre-install Status .
79
. . . . . . . . . . . . . . . . . .
79
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80
Network Connection Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network Printer Setup on a Local Network .
. . . . . . . . . . . . . . . . . .
Setting Up for Shared Printing .
82
82
. . . . . . . . . . . . . . . . .
86
. . . . . . . . . . . . . . . . . . . . . . . . . . .
91
Network Printer Setup on a Remote Network
. . . . . . . . . . . . . . . . .
91
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
92
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
95
Specifying the Shared Settings of the Printer
Point and Print .
Peer-to-Peer .
79
. . . . . . . . .
Inserting the Software and Documentation Disc
Direct Connection Setup
79
. . . . .
. . . . . . . . . . . . . . . . . . . .
Changing the firewall settings before installing your printer .
11 Installing Printer Drivers on Macintosh Computers
Installing the Drivers and Software
Adding a Printer on Mac OS X 10.4.11
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
101
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
103
Operation on Red Hat Enterprise Linux 5/6 Desktop .
. .
105
. . . . . . . . . . . . . . .
105
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
105
Installing the Printer Driver
Setting Up the Queue
. . . . . . . . . . . . . . . . . . . . . . . . . .
105
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
105
Setting the Default Queue .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying the Printing Options .
Uninstalling the Printer Driver .
106
. . . . . . . . . . . . . . . . . . . . . . .
107
. . . . . . . . . . . . . . . . . . . . . . . .
107
. . . . . . . . . . . . . . . . .
108
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
108
Operation on SUSE Linux Enterprise Desktop 10
Setup Overview
99
100
12 Installing Printer Drivers on Linux Computers (CUPS)
Setup Overview
99
. . . . . . . . . . . . . . . . . . . .
Adding a Printer on Mac OS X 10.3.9
Configuring Settings .
99
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
Adding a Printer on Mac OS X 10.5, 10.6, 10.7, or 10.8
Installing the Printer Driver
Setting Up the Queue
. . . . . . . . . . . . . . . . . . . . . . . . . .
108
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
108
Setting the Default Queue .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying the Printing Options .
. . . . . . . . . . . . . . . . . . . . . . .
Setting the Password for Authority as the Printer Administrator .
Template Last Updated - 2/7/2007
75
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . .
Contents
109
109
110
3
Uninstalling the Printer Driver .
. . . . . . . . . . . . . . . . . . . . . . . .
Operation on SUSE Linux Enterprise Desktop 11.
Setup Overview
110
. . . . . . . . . . . . . . . . .
110
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110
Installing the Printer Driver
Setting Up the Queue
. . . . . . . . . . . . . . . . . . . . . . . . . .
111
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111
Setting the Default Queue .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying the Printing Options
. . . . . . . . . . . . . . . . . . . . . . . .
Setting the Password for Authority as the Printer Administrator .
Uninstalling the Printer Driver .
112
112
. . . . . .
113
. . . . . . . . . . . . . . . . . . . . . . . .
113
Using Your Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
13 Operator Panel
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About the Operator Panel .
Using the Number Pad
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
117
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
118
. . . . . . . . . . . . . . . . . . . . . .
118
. . . . . . . . . . . . . . . . . . . . . . . .
118
. . . . . . . . . . . . . . . . . . . . . . . . . .
119
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
119
Number Pad Letters and Numbers
Changing Numbers or Names .
Printing a Panel Settings Report
Changing the Language .
. . . . . . . . . . . . . . . . . . . . . . .
119
. . . . . . . . . . . . . . . . . . . . . . . . . . .
119
When Using the Operator Panel .
When Using the Tool Box
Setting the Power Saver Timer Option .
. . . . . . . . . . . . . . . . . . . . . .
14 Dell™ Printer Configuration Web Tool
Overview
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up From Web Browser
121
. . . . . . . . . . . . . . . . . . . . . . . .
122
. . . . . . . . . . . . . . . . . . . . . . .
123
. . . . . . . . . . . . . . . . .
124
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
124
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124
Starting the Dell Printer Configuration Web Tool
Overview of the Menu Items
Printer Status
Printer Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124
Print Server Settings .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124
Copy Printer Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
Print Volume
Contents
121
122
Setting Up From Operator Panel .
4
119
. . . . . . . . . . . . . . .
Setting Up the Dell Printer Configuration Web Tool .
Printer Jobs
117
Template Last Updated - 2/7/2007
Printer Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
Tray Settings .
E-Mail Alert
Set Password
Online Help
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
125
Order Supplies at:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact Dell Support at: .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
125
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
126
Top Frame
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
126
Left Frame
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
127
Page Display Format
Right Frame
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
128
128
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
130
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
131
Details of the Menu Items .
Printer Status
Printer Jobs
128
. . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Settings of the Menu Items
Printer Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
132
Print Server Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
146
Copy Printer Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
167
Print Volume .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
168
Tray Settings .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
169
15 Understanding the Tool Box Menus .
Starting the Tool Box .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
171
171
Printer Setting Reports .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
171
Printer Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
171
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
172
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
173
Menu Settings .
Reports
TCP/IP Settings
Tray Settings .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
174
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
174
Panel Language .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB Direct Print Defaults
Printer Maintenance
175
. . . . . . . . . . . . . . . . . . . . . . . . . . .
175
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
176
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
176
Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
179
Tray Settings .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180
System Settings .
Panel Language .
TCP/IP Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
183
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
183
Network Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB Direct Print Defaults
Diagnosis .
Template Last Updated - 2/7/2007
125
184
. . . . . . . . . . . . . . . . . . . . . . . . . . .
184
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
185
Contents
5
Chart Print
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environment Sensor Info
Resetting Defaults
185
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
185
When Using the Tool Box
. . . . . . . . . . . . . . . . . . . . . . . . . . .
16 Understanding the Printer Menus
Report / List
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
187
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
PCL Fonts List
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
PCL Macros List
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
PS Fonts List .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
PDF Fonts List
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
Job History .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
187
Error History
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
188
Print Meter .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
188
Color Test Page
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stored Documents .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing a Report/List Using the Operator Panel
188
188
. . . . . . . . . . . . . . .
188
. . . . . . . . . . . . . . . . . . .
188
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
188
PCL .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
188
PDF .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
194
Printing a Report/List Using the Tool Box
Admin Settings
PostScript
Network
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
196
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
197
USB Settings .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Settings
Maintenance .
Defaults Settings
202
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
210
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
215
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
216
. . . . . . . . . . . . . . . . . . . . . . . . . . .
216
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
216
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
216
USB Direct Print Defaults
Tray Settings
MPF
201
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Secure Settings
Tray 1 .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
218
Tray 2 .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
219
Tray Priority
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
220
Panel Language .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
220
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
221
Print Menu
Secure Print
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Private Mail Box .
Contents
186
Panel Settings
Printer Settings
6
185
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
221
221
Template Last Updated - 2/7/2007
Public Mail Box
Proof Print .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
222
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
223
USB Direct Print .
Panel Lock
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
223
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
226
Enabling the Panel Lock .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
226
Disabling the Panel Lock
. . . . . . . . . . . . . . . . . . . . . . . . . . .
226
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
227
Resetting Defaults
When Using the Operator Panel
17 Print Media Guidelines
Paper
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
229
229
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
229
Recommended Paper
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
230
Unacceptable Paper
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
230
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
230
Paper Characteristics .
Selecting Paper
Selecting Pre-Printed Media and Letterheads
. . . . . . . . . . . . . . . .
231
. . . . . . . . . . . . . . . . . . . . . . . .
231
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
231
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
232
Selecting Pre-Punched Paper
Envelopes .
Labels .
Storing Print Media .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
233
. . . . . . . . . . . . . . . . . . . .
233
Supported Paper Sizes
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
233
Supported Paper Types
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
234
Identifying Print Media and Specifications
Paper Type Specifications
18 Loading Print Media .
Capacity .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Print Media Dimensions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
235
235
. . . . . . . . .
235
. . . . . . . . . . . . . . . . . . . . . . . . . .
237
. . . . . . . . . . . . . . . . . . . . . . .
239
. . . . . . . . . . . . . . . . . . . . . . . .
239
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
240
Loading an Envelope in the MPF
Envelope #10, Monarch, or DL
C5
235
235
Loading Letterhead (Pre-Printed and Pre-Punched Paper)
Loading Print Media in the MPF
234
. . . . . . . .
Loading Print Media in Tray1 and the Optional 550-Sheet Feeder
Using the MPF
Template Last Updated - 2/7/2007
227
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents
240
7
Linking Trays
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
240
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
19 Printing .
Tips for Successful Printing
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
243
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
243
Sending a Job to Print
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
243
Canceling a Print Job .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
244
Avoiding Paper Jams
Canceling a Job From the Operator Panel
. . . . . . . . . . . . . . . . . .
Canceling a Job From a Computer Running Windows
Duplex Printing
244
. . . . . . . . . . . .
244
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
245
.
245
Duplex Printing Without Duplex Unit (Dell C3760n Color Laser Printer Only) .
245
Using Booklet Print (Dell C3760n and Dell C3760dn Models)
. . . . . . . . .
246
. . . . . . . . . . . . . . . . . . . . . . . . . . .
247
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
248
Duplex Printing With Duplex Unit (Dell C3760dn Color Laser Printer Only) .
Using the Stored Print Feature
Overview .
Procedures for Printing Stored Print
. . . . . . . . . . . . . . . . . . . . .
249
Printing from USB Memory .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
250
Supported File Formats
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
251
Inserting and Removing a USB Memory
Printing a File in a USB Memory .
. . . . . . . . . . . . . . . . . . .
251
. . . . . . . . . . . . . . . . . . . . . . .
251
. . . . . . . . . . . . . . . . . .
252
. . . . . . . . . . . . . . . . . . . . . . .
252
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
253
Printing With Web Services on Devices (WSD)
Adding Roles of Printer Services
Printer Setup .
Installing a Printer Driver Using the Add Printer Wizard
Printing With AirPrint .
. . . . . . . . . . .
253
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
254
. . . . . . . . . . . . . . . . . . . . . .
254
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
254
Setting Up AirPrint on Your Printer
Printing via AirPrint
Printing With Google Cloud Print™
. . . . . . . . . . . . . . . . . . . . . . . .
Preparing to Use the Printer with Google Cloud Print .
Registering the Printer to Your Google Account
254
. . . . . . . . . . . . . . .
255
255
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
256
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
256
Printing a Report Page
Printer Settings
254
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
Printing via Google Cloud Print
Contents
243
. . . . . . . . . . . . . . . . . . . . . . . . . .
Tips on Storing Print Media
8
243
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Template Last Updated - 2/7/2007
Using the Operator Panel to Change the Printer Settings
. . . . . . . . . .
256
Using the Dell Printer Configuration Web Tool to Change the Printer Settings 256
Know Your Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
20 Understanding Your Printer Software
Printer Utility Software .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
262
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
262
Tool Box
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
262
Updater
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
263
Status Window
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status Monitor Widget Feature .
. . . . . . . . . . . . . . . . . . . . . .
263
263
Before Installing the Status Monitor Widget
Installing the Status Monitor Widget
. . . . . . . . . . . . . . . . .
263
. . . . . . . . . . . . . . . . . . . . .
263
Opening and Closing the Status Monitor Widget .
. . . . . . . . . . . . . .
264
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
264
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
265
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
266
Printer Status Window
Order Window .
Preferences
263
. . . . . . . . . . . . . . . . . . . . . . .
Status Monitor Widget for Macintosh .
Status Monitor Console for Linux
. . . . . . . . . . . . . . . . . . . . . . . . .
Status Monitor Console Feature
. . . . . . . . . . . . . . . . . . . . . . .
Before Installing the Status Monitor Console .
Installing the Status Monitor Console .
267
267
268
. . . . . . . . . . . . . . . . . . . . . . . . . .
268
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
269
Dell Supplies Management System Window .
. . . . . . . . . . . . . . . .
270
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
271
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
271
Service Tag Window
Settings Window
267
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Printer Selection Window .
Printer Status Window
267
. . . . . . . . . . . . . . . . . . . . .
Starting the Status Monitor Console
21 Printing Using ColorTrack (External Authentication) .
. . .
273
ColorTrack Settings.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
273
Dell ColorTrack
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
273
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
275
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
275
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
276
Authentication System
Kerberos Server .
LDAP Server .
LDAP Authentication
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
278
Setting the Printer Driver .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
278
Dell ColorTrack Mode .
Template Last Updated - 2/7/2007
261
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents
279
9
Specify Group Name .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
279
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
279
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
279
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
279
Specify Job Owner.
Job Owner Name
Password
22 Using Digital Certificates
Managing Certificates
281
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
281
. . . . . . . . . . . . . . . . . . . . . . . . .
283
. . . . . . . . . . . . . . . . . . . . . . . . . .
284
Importing a Digital Certificate
Setting a Digital Certificate
281
. . . . . . . . . . . . . . . . . . . . . .
Preparing to Manage Certificates .
Confirming the Settings of a Digital Certificate
. . . . . . . . . . . . . . . .
284
Deleting a Digital Certificate .
. . . . . . . . . . . . . . . . . . . . . . . . .
285
Exporting a Digital Certificate
. . . . . . . . . . . . . . . . . . . . . . . . .
285
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
286
Setting the Features .
. . . . . . . . .
286
. . . . . . . . . . . . . .
287
. . . . . . . . . . . . . . . . . . . .
287
Setting the Certificate in the IPsec Digital Signature Mode
Setting the SSL-use Server Certificate (HTTP/IPP)
Setting LDAP-SSL/TLS Communication
Setting Server Certificate Verification for LDAP-SSL/TLS Communication .
.
287
. . . . . . . .
288
. . . . . . . . . . . .
288
Setting Client Certificate for LDAP-SSL/TLS Communication .
Setting for Wireless LAN WPA-Enterprise (EAP-TLS).
Setting for Wireless LAN WPA-Enterprise (PEAPV0-MS-CHAPV2, EAP-TTLS PAP,
EAP-TTLS CHAP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Setting Client Certificate for IEEE 802.1x (EAP-TLS) .
23 Understanding Fonts
Typefaces and Fonts
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight and Style .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pitch and Point Size
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
293
293
295
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
299
. . . . . . . . . . . . . . . . . . . . . . . . .
24 Understanding Printer Messages
Contents
293
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Symbol Sets for PCL 5/PCL 6 .
10
293
294
Resident Fonts.
Error Codes
291
. . . . . . . . . . . . . . . . . . . . . . . . . .
Bitmapped and Scalable Fonts .
Symbol Sets .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
299
301
301
Template Last Updated - 2/7/2007
25 Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating System Compatibility
307
. . . . . . . . . . . . . . . . . . . . . . . . . .
307
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
307
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
307
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
307
Page Description Language (PDL)/Emulation, Operating System, and Interface .
307
Power Supply .
Dimensions .
Memory .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
308
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
308
MIB Compatibility
Environment.
Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Print Quality Guarantee
308
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
308
Storage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
308
Altitude
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
308
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
309
Cables .
Optional Wireless Adapter .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
309
Maintaining Your Printer . . . . . . . . . . . . . . . . . . . . . . . 311
26 Maintaining Your Printer
. . . . . . . . . . . . . . . . . . . . . . . . .
Determining the Status of Supplies
. . . . . . . . . . . . . . . . . . . . . . . .
313
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
313
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
313
Conserving Supplies
Ordering Supplies
Storing Print Media .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storing Consumables .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the Toner Cartridges
. . . . . . . . . . . . . . . . . . . . . . . . . .
Installing a Toner Cartridge
Replacing the Drum Cartridges
314
315
315
. . . . . . . . . . . . . . . . . . . . . . . . . .
316
. . . . . . . . . . . . . . . . . . . . . . . . . .
317
. . . . . . . . . . . . . . . . . . . . . . . .
317
. . . . . . . . . . . . . . . . . . . . . . . . . .
319
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
322
Removing the Drum Cartridge .
Installing a Drum Cartridge
Replacing the Fusing Unit
314
. . . . . . . . . . . . . . . . . . . . . . . .
Removing the Toner Cartridge.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
322
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
323
Removing the Fusing Unit
Installing a Fusing Unit
Template Last Updated - 2/7/2007
313
Contents
11
Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd BTR), and the Retard
Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
Removing the Transfer Belt Unit .
Installing a Transfer Belt Unit
324
. . . . . . . . . . . . . . . . . . . . . . . . .
327
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
329
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
329
Removing the 2nd BTR .
Installing a 2nd BTR
. . . . . . . . . . . . . . . . . . . . . . .
Removing the Retard Roller in Tray1 .
. . . . . . . . . . . . . . . . . . . . .
330
. . . . . . . . . . . . . . . . . . . . . . .
331
. . . . . . . . . . . . . . . . . . . . . . . . . .
332
Installing a Retard Roller in Tray1
Replacing the Waste Toner Box
. . . . . . . . . . . . . . . . . . . . . . .
332
. . . . . . . . . . . . . . . . . . . . . . . . .
333
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
334
Removing the Waste Toner Box .
Installing a Waste Toner Box
Cleaning Inside the Printer .
Cleaning the CTD Sensor
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Color Registration
338
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
342
. . . . . . . . . . . . . . . . . . . . .
342
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
342
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
344
Printing the Color Registration Chart
Determining Values
Entering Values
27 Removing Options .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
347
Removing the Optional 550-Sheet Feeder
. . . . . . . . . . . . . . . . . . . . .
349
Removing the Optional Wireless Adapter
. . . . . . . . . . . . . . . . . . . . .
351
. . . . . . . . . . . . . . . . . . . . . . . . .
353
28 Clearing Jams .
Avoiding Jams
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying the Location of Paper Jams
355
355
. . . . . . . . . . . . . . . . . . . . . .
356
Clearing Paper Jams From the MPF
. . . . . . . . . . . . . . . . . . . . . . . .
356
If error code: 050-112 appears:
. . . . . . . . . . . . . . . . . . . . . . . .
356
If error code: 050-129 appears:
. . . . . . . . . . . . . . . . . . . . . . . .
358
. . . . . . . . . . . . . . . . . . . . . . . . .
359
Clearing Paper Jams From Tray1 .
. . . . . . . . . . . . . . . . . . . .
360
If error code: 050-111 appears:
. . . . . . . . . . . . . . . . . . . . . . . .
360
If error code: 050-129 appears:
. . . . . . . . . . . . . . . . . . . . . . . .
362
Clearing Paper Jams From the Fusing Unit.
Clearing Paper Jams From the Optional 550-Sheet Feeder
Contents
347
Removing the Optional Memory Module .
Removing the Optional Hard Disk
12
334
. . . . . . . . . . . .
Cleaning the Raster Optical Scanner (ROS) Window .
. . . . . . . . . . . .
366
Template Last Updated - 2/7/2007
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369
29 Troubleshooting Guide .
Basic Printer Problems .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
371
Display Problems .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
371
Printing Problems
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
371
Print Quality Problems
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The output is too light
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Toner smears or print comes off
The entire output is blank
374
375
. . . . . . . . . . . . . . . . . . . . . . . . . . .
376
. . . . . . . . . . . . . . . . . . . . . . . .
Part or the entire output is black
. . . . . . . . . . . . . . . . . . . . . . .
378
378
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
379
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
380
Vertical blanks .
Light-induced fatigue
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
381
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
382
Bead-Carry-Out (BCO) .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
382
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
383
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
383
Jagged characters
Banding
Auger mark
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wrinkled/Stained paper .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Damage on the leading edge of paper
Jam/Alignment Problems
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
386
. . . . . . . . . . . . . . . . . . .
386
. . . . . . . . . . . . . . . . . . . . .
386
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
387
Tray1/Optional 550-Sheet Feeder Misfeed Jam .
MPF Misfeed Jam .
385
385
Color registration is out of alignment
Images are skewed
384
. . . . . . . . . . . . . . . . . . . .
The top and side margins are incorrect .
. . . . . . . . . . . . . . .
388
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
389
Regi Jam (Exit Sensor On JAM) .
Exit Jam (Exit Sensor Off JAM)
. . . . . . . . . . . . . . . . . . . . . . .
390
. . . . . . . . . . . . . . . . . . . . . . . .
390
. . . . . . . . . . . . . .
391
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
391
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
391
Tray1/Optional 550-Sheet Feeder Multi-feed Jam
MPF Multi-feed Jam .
Noise
377
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pitched color dots .
Fog .
373
. . . . . . . . . . . . . . . . . . . . . . .
Streaks appear on the output .
Ghosting .
372
. . . . . . . . . . . . . . . . . . . . . . . .
Random spots/Blurred images
Digital Certificate Problem .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other Problems .
393
. . . . . . . . . . . . . . . . .
395
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
395
Problems With Installed Optional Accessories .
Template Last Updated - 2/7/2007
371
Contents
13
Contacting Service
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
395
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397
B Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Dell™ Technical Support Policy
Online Services
. . . . . . . . . . . . . . . . . . . . . . . . . .
399
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
399
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
400
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
400
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
400
Warranty and Return Policy
Recycling Information
Contacting Dell
Index
14
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
401
Template Last Updated - 2/7/2007
Before Beginning
Notes, Cautions, and Warnings ..................................................... 17
1 Dell™ C3760n/C3760dn Color Laser Printer User's Guide ................19
2 Finding Information..................................................................... 21
3 Product Features......................................................................... 25
4 About the Printer......................................................................... 27
15
16
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your printer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2012 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft, Windows, Windows Server, Windows Vista, and
Active Directory are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; Apple,
Bonjour, iPad, iPhone, iPod touch, Macintosh, Mac OS, and TrueType are trademarks of Apple Inc., registered in the U.S. and other countries.
AirPrint and the AirPrint logo are trademarks of Apple Inc.; Android, Google Chrome, Gmail, Google, Google Cloud Print, and Google Drive are
either registered trademarks or trademarks of Google Inc.; Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries; Wi-Fi is a registered trademark of the Wi-Fi Alliance; Wi-Fi Protected Setup, WPA, and
WPA2 are trademarks of the Wi-Fi Alliance; Red Hat and Red Hat Enterprise Linux are registered trademarks of Red Hat. Inc. in the U.S. and
other countries; SUSE is a registered trademark of Novell, Inc., in the United States and other countries.
XML Paper Specification (XPS): This product may incorporate intellectual property owned by Microsoft Corporation. The terms and conditions
upon which Microsoft is licensing such intellectual property may be found at http://go.microsoft.com/fwlink/?LinkId=52369; DES: This product
includes software developed by Eric Young (eay@mincom.oz.au); AES: Copyright (c) 2003, Dr Brian Gladman, Worcester, UK. All rights
reserved. This product uses published AES software provided by Dr Brian Gladman under BSD licensing terms; TIFF (libtiff): Copyright (c)
1988-1997 Sam Leffler and Copyright (c) 1991-1997 Silicon Graphics, Inc.; ICC Profile (Little cms): Copyright (c) 1998-2004 Marti Maria.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
The printer software uses some of the codes defined by the Independent JPEG Group.
WSD stands for Web Services on Devices.
As for RSA BSAFE
This printer includes RSA BSAFE® Cryptographic software from EMC Corporation.
____________________
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in
applicable FAR provisions: Dell Inc., One Dell Way, Round Rock, Texas, 78682, USA.
November 2012 Rev. A02
Notes, Cautions, and Warnings
17
18
Notes, Cautions, and Warnings
Dell™ C3760n/C3760dn Color Laser Printer User's
Guide
1
Click the links to the left for information on the features, options, and operation of your Dell C3760n/C3760dn
Color Laser Printer. For information on other documentation included with your Dell C3760n/C3760dn Color Laser
Printer, see "Finding Information."
NOTE: In this manual, Dell C3760n/C3760dn Color Laser Printer is referred to as the "printer."
Conventions
The following describe the meaning of the symbols and fonts used in this manual:
Bold texts
: • Names of hardware button on the operator panel.
• Screen names on the LCD panel.
• Menus, commands, windows, or dialog boxes displayed on the computer screen.
Texts in Courier New font : • Menus and messages displayed on the LCD panel.
• Characters entered from the computer.
• Directory paths.
<
>
→
"
: • Key on the keyboard of the computer.
: • Indicates a path to a certain item within a procedure on a computer.
"
: • Cross references in this manual.
• Characters entered from the operator panel.
• Messages displayed on the computer screen.
Dell™ C3760n/C3760dn Color Laser Printer User's Guide
19
20
Dell™ C3760n/C3760dn Color Laser Printer User's Guide
2
Finding Information
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
What are you looking for?
Find it here
• Drivers for my printer
Software and Documentation disc
• My User's Guide
The Software and Documentation disc contains setup video, documentation,
and drivers for your printer. You can use the Software and Documentation disc to
install drivers or access your setup video and documentation.
Readme files may be included on your Software and Documentation disc to
provide last-minute updates about technical changes to your printer or advanced
technical reference material for experienced users or technicians.
• How to use my printer
Quick Reference Guide
Quick Reference Guide
1
About Your Printer
2
3
4
5
6
7
8
9 10 11
1
22 21
12
20
19 7 18 6
17
16 15 14 13 12
2
3
11
4
Service Tag Express Service Code
xxxxxxx
000 000 000 00
Service Tag
NOTE: Quick Reference Guide may not be included in the package for some
regions.
Finding Information
21
What are you looking for?
Find it here
• Safety information
Product Information Guide
• Warranty information
WARNING: Read and follow all safety instructions in the Product
Information Guide prior to setting up and operating your printer.
• How to set up my printer
Setup diagram
Setting Up Your Printer
1
2
4
5
3
a1
a2
b
• Express Service Code and Service Tag
Service Tag Express Service Code
xxxxxxx
000 000 000 00
The Express Service Code and Service Tag are located inside the front cover of
your printer.
• Latest drivers for my printer
• Documentation for my printer
22
Finding Information
Go to support.dell.com.
What are you looking for?
Find it here
• Answers to technical service and support
questions
support.dell.com provides several online tools, including:
• Solutions — Troubleshooting hints and tips, articles from technicians, and
online courses
• Upgrades — Upgrade information for components, such as the printer drivers
• Customer Care — Contact information, order status, warranty, and repair
information
• Downloads — Drivers
• Manuals— Printer documentation and product specifications
Go to support.dell.com. Select your region, and fill in the requested details to
access help tools and information.
Finding Information
23
24
Finding Information
3
Product Features
This chapter describes the product features and indicates their links.
Duplex Printing (Duplex Print)
Multiple Up in the Layout tab (N-up Print)
You can print two or more pages on both sides of a sheet of
paper. For printers with the duplex unit, automatic duplex
printing is available. Manual duplex printing is available for
printers without the duplex unit.
The Multiple Up feature enables you to print documents as
reduced-size documents containing multiple pages on a
single sheet of paper by setting from the printer driver. This
feature helps save paper.
Using the Stored Print Feature (Stored Print)
Printing from USB Memory (USB Direct Print)
The Stored Print feature allows you to temporarily store
your print data in the printer memory or hard disk, so you
can print it later. When printing confidential jobs, use the
number pad to enter the password. You can effectively
manage your time when you print confidential data or
large-volume data at off-peak hours.
The USB Direct Print feature enables you to print files
directly from a USB memory without requiring you to start
your computer and an application.
Product Features
25
26
Product Features
4
About the Printer
This chapter provides an overview of your Dell™ C3760n/C3760dn Color Laser Printer.
NOTE: The images used in this manual are those of the Dell C3760dn Color Laser Printer unless otherwise mentioned.
Front and Rear View
Front View
1
13
12
14
11
9
2
10
3
4
8
5
7
6
1
Transfer Belt Unit
8
Multipurpose Feeder (MPF)
2
Drum Cartridges
9
Toner Cartridges
3
Waste Toner Box
10
Front Cover
4
Right Side Cover
11
Operator Panel
5
Power Switch
12
Output Tray Extension
6
Tray1
13
Front USB Port
7
Optional 550-Sheet Feeder (Tray2)
14
Top Cover
About the Printer
27
Rear View
1
10
2
9
8
3
4
7
5
6
1
Control Board
6
Duplex Unit (C3760dn only)
2
Left Side Cover
7
2nd Belt Transfer Roller (2nd BTR)
3
Ethernet Port
8
Fusing Unit
4
Wireless Adapter Socket
9
Power Connector
5
USB Port
10
Rear Cover
28
About the Printer
Space Requirements
Provide enough room to open the printer trays, covers, and optional accessories, and for proper ventilation.
200 mm/7.87 inches
379 mm/14.92 inches
400 mm/15.75 inches
400 mm/15.75 inches
485 mm/19.09 inches
439 mm/17.28 inches
400 mm/15.75 inches
600 mm/23.62 inches
Operator Panel
For more information on the operator panel, see "About the Operator Panel."
About the Printer
29
Additional Components
Optional Accessories
The following optional accessories are available for the printer.
NOTE: Each accessory can be purchased separately except for the wireless adapter and the hard disk, which can only be
purchased together as a bundled kit.
•
Wireless adapter
•
512MB memory module
•
Hard disk
•
Optional 550-sheet feeder
Non-bundled Items
The following items are required for connecting the printer to a computer or a network. Please purchase them as
needed.
•
USB cable
•
Ethernet cable
Securing the Printer
To protect your printer from theft, you can use the optional Kensington lock.
Attach the Kensington lock to the security slot on your printer.
Security Slot
Security Slot
For details, see the operating instructions supplied with the Kensington lock.
30
About the Printer
Ordering Supplies
You can order consumables from Dell online when using a networked printer. Enter the IP address of your printer in
your web browser, launch the Dell Printer Configuration Web Tool, and click the web address under Order Supplies
at: to order toner or supplies for your printer.
You can also order replacement toner cartridges or supplies from Dell by using the Dell Supplies Management
System:
NOTE: For Macintosh, start the Status Monitor Widget, and then select Order Supplies button to open Order window.
1 Double-click the icon on your desktop.
If you cannot find the icon on your desktop:
a
Right-click DLRMM.EXE under x:\abc\Dell Printers\Additional Color Laser
Software\Reorder, where x:\abc is the location where the printer software is installed.
b
Choose Send To from the drop-down menu, and then click Desktop (create shortcut) on the submenu.
The Dell Supplies Management System window appears.
You can also launch the Dell Supplies Management System by clicking Start → All Programs → Dell Printers →
Additional Color Laser Software → Dell Supplies Management System.
2 Click the Visit Dell printer supplies ordering web site link (www.dell.com/supplies), or order Dell printer supplies
by phone.
To ensure that you get the best service, have your Dell printer’s Service Tag ready.
For information regarding locating your Service Tag, see "Express Service Code and Service Tag."
About the Printer
31
32
About the Printer
Setting up the Printer (Printer
Setup)
5 Preparing Printer Hardware...................................................... 35
6 Installing Optional Accessories................................................ 37
7 Connecting Your Printer ............................................................. 65
8 Setting the IP Address ............................................................... 71
9 Loading Paper.............................................................................. 75
10 Installing Printer Drivers on Windows® Computers ............. 79
11 Installing Printer Drivers on Macintosh Computers.............. 99
12 Installing Printer Drivers on Linux Computers (CUPS) ...........105
33
34
5
Preparing Printer Hardware
Removing Tape
1 Remove tapes from the printer.
Preparing Printer Hardware
35
36
Preparing Printer Hardware
6
Installing Optional Accessories
You can make the printer more functional by installing the optional accessories. This chapter describes how to install
the printer's options such as the 512 MB memory module, optional 550-sheet feeder (tray2), wireless adapter, and
hard disk.
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
Installing the Optional Memory Module
1 Ensure that the printer is turned off.
2 Turn the screw on the left side cover counterclockwise.
3 Slide the left side cover towards the back of the printer.
4 Open the left side cover completely.
Installing Optional Accessories
37
5 Hold the edge of the memory module and face its connector toward the slot with the notch on the connector
positioned on left.
notch
6 Align the connector of the memory module with the slot and insert the memory module into the slot.
7 Push the memory module firmly into the slot.
NOTE: Ensure that the memory module is firmly fixed in the slot and does not move easily.
38
Installing Optional Accessories
8 Close the left side cover, and then slide it towards the front of the printer.
9 Turn the screw clockwise.
10 Turn on the printer.
11 Print the printer settings report to confirm that the newly installed memory is detected by the printer.
For details about how to print a printer settings report, see "Report / List."
12 Confirm the amount of Memory Capacity listed in the printer settings report under General.
If the memory capacity has not increased, turn off the printer, unplug the power cable, and re-install the memory
module.
13 If you installed the optional memory module after installing the printer driver, update your driver by following the
instructions for the operating system you are using. If the printer is on a network, update the driver for each client.
Updating Your Driver to Detect Memory Module
NOTE: When you use XPS driver, driver updating is not required.
When Using PCL Driver
Microsoft® Windows® 8/
Windows 8 x64/
Windows Server® 2012
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
Installing Optional Accessories
39
Windows 7/
7 x64/
Server 2008 R2 x64
1 Click Start → Devices and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
®
Windows Vista /Vista x64
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
Windows Server 2008/
Server 2008 x64
1 Click Start → Control Panel → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
Windows XP/XP x64/
Server 2003/
Server 2003 x64
1 Click start → Printers and Faxes.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers and Faxes dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these
steps:
1 Click the Options tab, and then select Memory Capacity in the Items list box.
2 Select the total amount of the installed printer memory in the Memory Capacity drop-down menu in Change
Setting for.
3 Click Apply, and then click OK.
4 Close the Printers and Faxes(Printers, or Devices and Printers) dialog box.
When Using PS Driver
Windows 8/
Windows 8 x64/
Windows Server 2012
40
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Devices and Printers dialog box.
Installing Optional Accessories
Windows 7/
7 x64/
Server 2008 R2 x64
1 Click Start → Devices and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Devices and Printers dialog box.
Windows Vista/Vista x64
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers dialog box.
Windows Server 2008/
Server 2008 x64
1 Click Start → Control Panel → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers dialog box.
Windows XP/XP x64/
Server 2003/
Server 2003 x64
1 Click Start → Printers and Faxes.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers and Faxes dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these
steps:
1 Click the Configuration tab, and then select Installable Options.
2 Select Memory Capacity in the Items list box.
3 Select the total amount of the installed printer memory in the Memory Capacity drop-down menu under Setting
for.
4 Click OK.
5 Click Apply, and then click OK.
6 Close the Printers and Faxes (Printers, or Devices and Printers) dialog box.
Mac OS X® 10.7.x/10.8.x
1 Select the Print & Scan in System Preferences.
2 Select the printer in Printers list, and click Options & Supplies.
3 Select Driver, select the options that have been installed on the printers, and then click OK.
Mac OS X 10.5.x/10.6.x
1 Select the Print & Fax in System Preferences.
2 Select the printer in Printers list, and click Options & Supplies.
3 Select Driver, select the options that have been installed on the printers, and then click OK.
Installing Optional Accessories
41
Mac OS X 10.3.x/10.4.x
1 Select the printer from the Printer List screen in Print Center (or Printer Setup Utility).
2 Click Printers on the Print Center (or Printer Setup Utility) menu bar, and select Show
Info.
3 Select Installable Options, and select the options that have been installed on the printer,
and then click Apply Changes.
Installing the Optional 550-Sheet Feeder
WARNING: If you install the optional 550-sheet feeder after setting up the printer, be sure to turn off the printer, unplug the
power cable, and disconnect all cables from the back of the printer before starting this task.
1 Ensure that the printer is turned off, and then disconnect all cables from the back of the printer.
2 Remove the tape and the bag holding the screws.
NOTE: Do not lose the screws because you will need them later.
3 Place the optional 550-sheet feeder in the same location that the printer is located.
4 Pull tray1 out of the printer about 200 mm.
5 Hold tray1 with both hands, and remove it from the printer.
42
Installing Optional Accessories
6 Lift the printer and align the five guide pins of the optional 550-sheet feeder with the holes at the bottom of the
printer. Gently lower the printer onto the optional 550-sheet feeder.
WARNING: Two people are required to lift the printer.
WARNING: Be careful not to pinch your fingers when lowering the printer onto the optional 550-sheet feeder.
7 Secure the optional 550-sheet feeder to the printer by tightening the two screws provided with the feeder, using a
coin or similar object.
8 Insert tray1 into the printer, and push until it stops.
9 Re-connect all cables into the back of the printer, and turn on the printer.
NOTE: The printer will automatically detect the attached tray but will not detect the paper type.
Installing Optional Accessories
43
10 Print the printer settings report to confirm that the optional 550-sheet feeder is installed correctly.
For details about how to print a printer settings report, see "Report / List."
11 Confirm Tray2 (550 Sheet Feeder) is listed in the printer settings report under Printer Options.
If the feeder is not listed, turn off the printer, unplug the power cable, and re-install the optional 550-sheet feeder.
12 After loading paper in the optional 550-sheet feeder, specify the paper type from the operator panel.
a
Press the
(Menu) button.
b
Press the
button until Tray Settings is highlighted, and then press the
c
Press the
button until Tray 2 is highlighted, and then press the
d
Press the
button until Paper Type is highlighted, and then press the
e
Press the
button until the paper type for the optional 550-sheet feeder is displayed, and then press the
(Set) button.
f
Confirm that the selected paper type is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
(Menu) button.
13 If you installed the optional 550-sheet feeder after installing the printer driver, update your driver by following the
instructions for each operating system. If the printer is on a network, update the driver for each client.
Updating Your Driver to Detect 550-Sheet Feeder
When Using PCL Driver
Windows 8/
Windows 8 x64/
Windows Server 2012
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click
Windows 7/
7 x64/
Server 2008 R2 x64
1 Click Start → Devices and Printers.
Windows Vista/Vista x64
1 Click Start → Control Panel → Hardware and Sound → Printers.
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
Windows Server 2008/
Server 2008 x64
1 Click Start → Control Panel → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
44
Installing Optional Accessories
Windows XP/XP x64/
Server 2003/
Server 2003 x64
1 Click start → Printers and Faxes.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers and Faxes dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these
steps:
1 Click the Options tab, and then select Paper Tray Configuration in the Items list box.
2 Select Tray2 in the Paper Tray Configuration drop-down menu in Change Setting for.
3 Click Apply, and then click OK.
4 Close the Printers and Faxes(Printers, or Devices and Printers) dialog box.
When Using PS Driver
Windows 8/
Windows 8 x64/
Windows Server 2012
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click
Windows 7/
7 x64/
Server 2008 R2 x64
1 Click Start → Devices and Printers.
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Devices and Printers dialog box.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Devices and Printers dialog box.
Windows Vista/Vista x64
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers dialog box.
Windows Server 2008/
Server 2008 x64
1 Click Start → Control Panel → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers dialog box.
Installing Optional Accessories
45
Windows XP/XP x64/
Server 2003/
Server 2003 x64
1 Click Start → Printers and Faxes.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers and Faxes dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these
steps:
1 Click the Configuration tab, and then select Installable Options.
2 Select Paper Tray Configuration in the Items list box.
3 Select Tray2 in the Paper Tray Configuration drop-down menu in Setting for.
4 Click OK.
5 Click Apply, and then click OK.
6 Close the Printers and Faxes (Printers, or Devices and Printers) dialog box.
Mac OS X 10.7.x/10.8.x
1 Select the Print & Scan in System Preferences.
2 Select the printer in Printers list, and click Options & Supplies.
3 Select Driver, select the options that have been installed on the printers, and then click OK.
Mac OS X 10.5.x/10.6.x
1 Select the Print & Fax in System Preferences.
2 Select the printer in Printers list, and click Options & Supplies.
3 Select Driver, select the options that have been installed on the printers, and then click OK.
Mac OS X 10.3.x/10.4.x
1 Select the printer from the Printer List screen in Print Center (or Printer Setup Utility).
2 Click Printers on the Print Center (or Printer Setup Utility) menu bar, and select Show
Info.
3 Select Installable Options, and select the options that have been installed on the printer,
and then click Apply Changes.
When Using XPS Driver
NOTE: The XPS driver does not support Windows XP, XP x64, and Windows Server 2003.
Windows 8/
Windows 8 x64/
Windows Server 2012
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click
Windows 7/
7 x64/
Server 2008 R2 x64
1 Click Start → Devices and Printers.
46
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Device Setting tab, and then select Available in Tray2 drop-down menu.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Device Setting tab, and then select Available in Tray2 drop-down menu.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
Installing Optional Accessories
Windows Vista/Vista x64
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Device Setting tab, and then select Available in Tray2 drop-down menu.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
Windows Server 2008/
Server 2008 x64
1 Click Start → Control Panel → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Device Setting tab, and then select Available in Tray2 drop-down menu.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
Installing the Optional Wireless Adapter
The wireless adapter allows you to use the printer with wireless network connection.
The specifications of the wireless adapter are described below.
Item
Specification
Connectivity Technology
Wireless
Compliant Standards
IEEE 802.11b, 802.11g, and 802.11n
Bandwidth
2.4 GHz
Data Transfer Rate
IEEE 802.11n: 65 Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
Security
64 (40-bit key)/128 (104-bit key) WEP,
WPA- PSK (TKIP, AES), WPA2-PSK (AES), WPA-Enterprise (TKIP, AES)*1*2,
WPA2-Enterprise (AES)*1*2
Wi-Fi Protected Setup® (WPS)*3
Push-Button Configuration (PBC),
Personal Identification Number (PIN)
*1
This item is available only when the optional hard disk is installed.
*2
EAP method supports PEAPv0, EAP-TLS, EAP-TTLS PAP, and EAP-TTLS CHAP.
*3
WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK,
WPA-PSK AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)
NOTE: When the wireless adapter is installed, you cannot use IEEE 802.1x authentication and/or the Ethernet port for a wired
connection.
Installing Optional Accessories
47
Verifying the Contents of the Box
Installing the Optional
Wireless Adapter
Wireless Adapter
NOTE: To complete wireless installation, you require the corresponding Software and Documentation disc that comes with your
printer, which can also be downloaded from support.dell.com.
Installing the Wireless Adapter Using Video Instructions (Recommended)
To install the wireless adapter, perform the following method.
1 Insert the Software and Documentation disc in your computer. The Easy Setup Navigator file launches
automatically.
2 Select Optional Accessories Setup on the Easy Setup Navigator window.
48
Installing Optional Accessories
3 Click Wireless adapter.
The instruction video starts.
Follow the on-screen instructions to configure wireless settings.
Installing the Optional Wireless Adapter
NOTE: You can also install the wireless adapter by following the instructions described in Installing the Optional Wireless
Adapter provided with the wireless adapter.
1 Ensure that the printer is turned off.
2 Align the connector and the three protrusions of the wireless adapter with the four holes and insert the adapter.
NOTE: Ensure that the adapter is fully inserted and secured.
3 Turn on the printer.
NOTE: If a message displays telling you to make initial setup on the LCD panel, always do as instructed.
4 Print the printer settings report to confirm that the wireless adapter is installed correctly.
For details about how to print a printer settings report, see "Report / List."
Installing Optional Accessories
49
5 Confirm that the Network (Wireless) section exists.
6 Configure the wireless adapter to connect to a wireless network. For details, see "Configuring the Optional
Wireless Adapter."
Determining the Wireless Network Settings
You need to know the settings for the wireless network to set up the wireless printer. For details of the settings,
contact your network administrator.
Wireless Settings
Security Settings
*
50
SSID
Specifies the name that identifies the wireless network with up to 32
alphanumeric characters.
Network Mode
Specifies the network mode from Ad-hoc or Infrastructure.
Security
Selects the encryption type from No Security, Mixed mode PSK*, WPA-PSKTKIP, WPA2-PSK-AES, and WEP.
Transmit Key
Specifies the transmit key from the list.
WEP Key
Specifies the WEP key used through the wireless network only when WEP is
selected as the encryption type.
Pass Phrase
Specifies the pass phrase of alphanumeric characters from 8 to 63 bytes long
only when Mixed mode PSK*, WPA-PSK-TKIP, or WPA2-PSK-AES is
selected as the encryption type.
Mixed mode PSK automatically selects an available encryption type from WPA-PSK-TKIP, WPA-PSK-AES, or WPA2-PSK-AES.
Installing Optional Accessories
Configuring the Optional Wireless Adapter
This section describes how to configure a wireless adapter through Easy Setup Navigator.
You can select a method to configure a wireless adapter from the following:
Wizard Setup through USB Cable(recommended)
WPS-PBC*1*3
WPS-PIN*2*3
Advanced Setup through
Operator Panel
Ethernet Cable
Dell Printer Configuration Web Tool
*1 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless
configuration, by pressing the button provided on the access point via wireless routers, and then performing WPS-PBC setting on the
operator panel. This setting is available only when the access point supports WPS.
*2 WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wireless configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is available
only when the access points of your wireless router supports WPS.
*3 WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES,
WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)
NOTE: The optional wireless adapter must be installed on the printer. For information on how to install a wireless adapter, see
"Installing the Optional Wireless Adapter."
NOTE: If the Panel Lock Control is set to Enable, you need to enter the four digit password to enter the Admin
Settings menu.
NOTE: For details about using WPA-Enterprise-AES, WPA2-Enterprise-AES, or WPA-Enterprise-TKIP, see "Using Digital
Certificates."
Using Wizard Setup to Configure a Wireless Adapter
1 Insert the Software and Documentation disc provided with the printer in your computer. The Easy Setup
Navigator file launches automatically.
2 Click Start Setup.
Installing Optional Accessories
51
3 Click Connect Your Printer.
4 Click Wireless Connection.
5 Click Wizard.
Follow the on-screen instructions to configure wireless settings.
52
Installing Optional Accessories
Using Advanced Setup to Configure a Wireless Adapter
You can configure the wireless adapter with the following connection methods:
•
WPS-PBC
•
WPS-PIN
•
Operator Panel
•
Ethernet Cable
•
Dell Printer Configuration Web Tool
1 Insert the Software and Documentation disc provided with the printer in your computer. The Easy Setup
Navigator file launches automatically.
2 Click Start Setup.
3 Click Connect Your Printer.
4 Click Wireless Connection.
Installing Optional Accessories
53
5 Select Advanced, and then select a connection method from WPS-PBC, WPS-PIN, Operator Panel, Ethernet
Cable, or Dell Printer Configuration Web Tool.
For Ethernet Cable:
Select Ethernet Cable, and then click Next.
a
Follow the on-screen instructions to configure wireless settings, and then click Next.
The Advanced Configuration Tool starts.
Select the printer, and then click Next.
b
Wireless Network Settings screen appears.
NOTE: If the printer is not listed, click Enter IP Address and enter the IP address of your printer, and then click OK.
Set the wireless network settings, and then click Next.
c
IP Address Settings screen appears.
NOTE: For details on each item, see "Assigning an IP Address."
Set the IP address settings of the printer, and then click Next.
d
Confirm the settings screen appears.
Confirm the settings, and then click Apply.
e
Complete configuration screen appears.
Click Next.
f
For WPS-PBC, WPS-PIN, Operator Panel, and Dell Printer Configuration Web Tool, follow the on-screen
instructions to configure wireless settings.
To configure wireless settings without using the video instructions, see the following instructions.
WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE: WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices
required for wireless configuration by entering PIN assignments to a printer and computer. This setting, performed through an
access point, is available only when the access points of your wireless router supports WPS.
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until WPS Setup is highlighted, and then press the
5 Ensure that PIN Code is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
6 Write down the displayed 8-digit PIN code or select Print PIN Code. The PIN code is printed.
7 Ensure that Start Configuration is highlighted, and then press the
(Set) button.
8 Ensure that the message Please wait WPS Setting is displayed, and enter the PIN code displayed on step
6 into the wireless LAN access point (Registrar).
NOTE: For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access
point.
9 When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.
54
Installing Optional Accessories
WPS-PBC
You can start Push Button Control only from the operator panel.
NOTE: WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required
for wireless configuration by pressing the button provided on the access point via wireless routers, and then performing WPSPBC setting on the operator panel. This setting is available only when the access point supports WPS.
NOTE: Before starting WPS-PBC, confirm the position of the WPS button (button name may vary) on the wireless LAN access
point. For information about WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless
LAN access point.
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until WPS Setup is highlighted, and then press the
(Set) button.
5 Ensure that Push Button Control is highlighted, and then press the
(Set) button.
6 Ensure that Start is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
Ensure that the message Please wait WPS Setting is displayed, and start the WPS-PBC on the wireless
LAN access point (Registrar) within two minutes.
7 When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.
Operator Panel
Auto SSID Setup
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until Wireless Setup is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
The printer automatically searches the access points on wireless network.
5 Press the
button until the desired access point is highlighted, and then press the
(Set) button.
If the desired access point does not appear, go to "Manual SSID Setup."
NOTE: Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
6 Enter the WEP key or pass phrase.
When the encryption type of the selected access point is WEP in step 5:
•
Enter the WEP key, and then press the
(Set) button.
When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 5:
•
Enter the pass phrase, and then press the
(Set) button.
7 The Restart System screen appears.
8 Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
Installing Optional Accessories
55
Manual SSID Setup
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until Wireless Setup is highlighted, and then press the
5 Press the
button until Manual Setup is highlighted, and then press the
6 Enter the SSID, and then press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
7 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then press
(Set) button.
the
If you select Infrastructure, proceed to step 8.
If you select Ad-hoc, proceed to step 9.
8 Select the encryption type from No Security, Mixed mode PSK, WPA-PSK-TKIP, WPA2-PSK-AES, or
WEP.
If you do not set security for your wireless network:
•
Press the
button until No Security is highlighted, and then press the
(Set) button.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
a
Press the
button until Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES is highlighted, and
(Set) button.
then press the
b
Enter the pass phrase, and then press the
(Set) button.
To use WEP encryption:
button until WEP is highlighted, and then press the
(Set) button.
a
Press the
b
Enter the WEP key, and then press the
c
Press the
button to highlight the desired transmit key from Auto or WEP Key 1 to WEP Key 4, and
(Set) button.
then press the
(Set) button.
Proceed to step 10.
9 Select the encryption type from No Security or WEP.
If you do not set security for your wireless network:
•
Ensure that No Security is highlighted, and then press the
(Set) button.
To use WEP encryption:
button until WEP is highlighted, and then press the
Press the
b
Enter the WEP key, and then press the
c
Press the
button to highlight the desired transmit key from WEP Key 1 to WEP Key 4, and then press
(Set) button.
the
(Set) button.
10 The Restart System screen appears.
11 Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
56
(Set) button.
a
Installing Optional Accessories
Dell Printer Configuration Web Tool
NOTE: For details about using WPA-Enterprise-AES, WPA2-Enterprise-AES, or WPA-Enterprise-TKIP, see "Using Digital
Certificates."
1 Ensure that the printer is turned off and the wireless adapter is connected to the printer.
2 Connect the printer to the network with an Ethernet cable.
For details about how to connect the Ethernet cable, see "Connecting Printer to Computer or Network."
3 Turn on the printer.
4 Launch the Dell Printer Configuration Web Tool by entering the IP address of the printer in your web browser.
5 Click Print Server Settings.
6 Click Print Server Settings tab.
7 Click Wireless LAN.
8 Enter the SSID in the SSID text box.
9 Select Ad-Hoc or Infrastructure in the Network Type drop-down list box.
10 Select the encryption type from No Security, WEP, WPA-PSK-TKIP, WPA-PSK-AES/WEP2-PSK AES, and Mixed
Mode PSK in the Encryption drop-down list box, and then set each item for the encryption type selected.
NOTE: For details on each item, see "Dell™ Printer Configuration Web Tool."
11 Click Apply New Settings to apply the settings.
12 Turn off the printer, disconnect the Ethernet cable and turn it on again.
Wireless LAN connection setting is complete.
Reconfiguring the Wireless Setting
To change the wireless setting through an Ethernet or wireless connection from your computer, perform the
following.
NOTE: To change the wireless setting through wireless connection, ensure that the wireless connection setting is completed in
"Configuring the Optional Wireless Adapter."
NOTE: The following settings are available when the network mode is set to infrastructure in "Configuring the Optional Wireless
Adapter."
1 Check the IP address of the printer.
For details about how to check the IP address of the printer, see "Verifying the IP Settings."
Installing Optional Accessories
57
2 Launch the Dell Printer Configuration Web Tool by entering the IP address of the printer in your web browser.
3 Click Print Server Settings.
4 Click Print Server Settings tab.
5 Click Wireless LAN.
6 Change the wireless setting of the printer.
7 Reboot the printer.
8 Change the wireless settings on your computer or access point accordingly.
NOTE: To change the wireless settings on your computer, refer to the manuals provided with the wireless adapter or if
your computer provides a wireless adapter tool, change the wireless settings using that tool.
Installing the Optional Hard Disk
1 Ensure that the printer is turned off.
2 Turn the screw on the control board counterclockwise.
58
Installing Optional Accessories
3 Slide the left side cover towards the back of the printer.
4 Open the left side cover completely.
5 Insert the two plastic pins on the hard disk into the metal casing holes.
6 Attach the plastic pin and the connector to the control board, and push the hard disk firmly into place.
Installing Optional Accessories
59
7 Close the left side cover, and then slide it towards the front of the printer.
8 Turn the screw clockwise.
9 Turn on the printer.
10 Print the printer settings report to confirm that the newly installed hard disk is detected by the printer.
For details about how to print a printer settings report, see "Report / List."
11 Confirm the amount of Hard Disk listed in the printer settings report under Printer Options.
If the hard disk is not listed, turn off the printer, unplug the power cable, and re-install the hard disk.
12 If you installed the hard disk after installing the printer driver, update your driver by following the instructions for
the operating system you are using. If the printer is on a network, update the driver for each client.
Hard disk can be specified on the printer driver only when hard disk or RAM disk is available on the printer driver.
Updating Your Driver to Detect Hard Disk
NOTE: When you use XPS driver, driver updating is not required.
When Using PCL Driver
Windows 8/
Windows 8 x64/
Windows Server 2012
60
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
Installing Optional Accessories
Windows 7/
7 x64/
Server 2008 R2 x64
1 Click Start → Devices and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Devices and Printers dialog box.
Windows Vista/
Vista x64
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
Windows Server 2008/
Server 2008 x64
1 Click Start → Control Panel → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers dialog box.
Windows XP/XP x64/
Server 2003/
Server 2003 x64
1 Click start → Printers and Faxes.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Options tab, and then select Get Information from Printer.
4 Click Apply, and then click OK.
5 Close the Printers and Faxes dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these
steps:
1 Click the Options tab, and then select Hard Disk in the Items list box.
2 Select Available in the Hard Disk drop-down menu in Change Setting for.
3 Click Apply, and then click OK.
4 Close the displayed active dialog box.
When Using PS Driver
Windows 8/
Windows 8 x64/
Windows Server 2012
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Devices and Printers dialog box.
Installing Optional Accessories
61
Windows 7/
7 x64/
Server 2008 R2 x64
1 Click Start → Devices and Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Printer properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Devices and Printers dialog box.
Windows Vista/Vista x64
1 Click Start → Control Panel → Hardware and Sound → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers dialog box.
Windows Server 2008/Server 2008
x64
1 Click Start → Control Panel → Printers.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers dialog box.
Windows XP/XP x64/Server
2003/Server 2003 x64
1 Click Start → Printers and Faxes.
2 Right-click the printer icon of the Dell C3760n/C3760dn Color Laser Printer, and then
select Properties.
3 Click the Configuration tab, and then select Bi-Directional Setup.
4 Select Get Information from Printer and then click OK.
5 Click Apply, and then click OK.
6 Close the Printers and Faxes dialog box.
If the printer information is not updated automatically after clicking Get Information from Printer, follow these
steps:
1 Click the Configuration tab, and then select Installable Options.
2 Select Hard Disk in the Items list box.
3 Select Available in the Hard Disk drop-down menu in Setting for.
4 Click OK.
5 Click Apply, and then click OK.
6 Close the Printers and Faxes (Printers, or Devices and Printers) dialog box.
Mac OS X 10.7.x/10.8.x
1 Select the Print & Scan in System Preferences.
2 Select the printer in Printers list, and click Options & Supplies.
3 Select Driver, select the options that have been installed on the printers, and then click OK.
Mac OS X 10.5.x/10.6.x
1 Select the Print & Fax in System Preferences.
2 Select the printer in Printers list, and click Options & Supplies.
3 Select Driver, select the options that have been installed on the printers, and then click OK.
62
Installing Optional Accessories
Mac OS X 10.3.x/10.4.x
1 Select the printer from the Printer List screen in Print Center (or Printer Setup Utility).
2 Click Printers on the Print Center (or Printer Setup Utility) menu bar, and select Show
Info.
3 Select Installable Options, and select the options that have been installed on the printer,
and then click Apply Changes.
Installing Optional Accessories
63
64
Installing Optional Accessories
7
Connecting Your Printer
Your Dell™ C3760n/C3760dn Color Laser Printer interconnection cable must meet the following requirements:
Connection type
Connection specifications
Ethernet
10 Base-T/100 Base-TX/1000 Base-T
Wireless (optional)
IEEE 802.11b/802.11g/802.11n
USB
USB 2.0
NOTE: The images used in this manual are those of the Dell C3760dn Color Laser Printer unless otherwise mentioned.
1
2
3
1 Ethernet port
2 Wireless adapter socket
3 USB port
Connecting Your Printer
65
Connecting Printer to Computer or Network
Direct Connection
A local printer is a printer which is directly connected to your computer using the USB cable. If your printer is
connected to a network instead of your computer, skip this section and go to "Network Connection."
To connect the printer to a computer:
1 Connect the smaller USB connector into the USB port at the back of the printer.
1
1
1 USB port
NOTE: Ensure that you match the USB symbol on the cable to the USB symbol on the printer.
2 Connect the other end of the cable into a USB port of the computer.
CAUTION: Do not connect the printer USB cable to the USB port available on the keyboard.
66
Connecting Your Printer
Network Connection
To connect the printer to a network:
1 Connect the Ethernet cable.
1
1
1 Ethernet port
To connect the printer to the network, connect one end of an Ethernet cable into the Ethernet port on the rear of
the printer, and the other end to a LAN drop or hub. To setup a wireless connection, insert the wireless adapter into
the wireless adapter socket on the back of the printer.
For a wireless connection, see "Installing the Optional Wireless Adapter."
NOTE: To use the wireless adapter, be sure to disconnect the Ethernet cable.
Connecting Your Printer
67
Turning on the Printer
WARNING: Do not use extension cords or power strips.
WARNING: The printer should not be connected to an Uninterruptible Power Supply (UPS) system.
1 Connect the power cable to the power connector on the rear of the printer, and then to a power source.
2 Turn on the printer. When the printer is connected via a USB (Uninterruptible Power Supply) cable, the USB
driver is automatically installed.
Setting Initial Settings on the Operator Panel
You need to set the printer language, time zone, clock date, and time when you turn on printer for the first time.
When you turn the printer on, the wizard screen to perform the initial setup appears on the operator panel. Follow
the steps below to set the initial settings.
NOTE: If you do not start configuring the initial settings, the printer automatically restarts in three minutes. After that, you can
set the following initial setup by enabling Power on Wizard on the operator panel or Dell Printer Configuration Web Tool
if needed.
For more information on operator panel, see "Operator Panel."
For more information on Dell Printer Configuration Web Tool, see "Dell™ Printer Configuration Web Tool."
1 The Please Select Language appears. Press the
(Set) button.
press the
English
Français
Italiano
Deutsch
Español
Dansk
Nederlands
Norsk
Svenska
68
Connecting Your Printer
button until the desired language is highlighted, and then
2 The Please Select Time Zone appears. Press the
(Set) button.
press the
button until the desired time zone is highlighted, and then
UTC -12:00
UTC -11:00
Midway Island, Niue, Samoa
UTC -10:00
Adak, Hawaii, Tahiti, Cook Islands
UTC -09:00
Alaska, Gambier Islands
UTC -08:00
Pacific Time (US & Canada), Pitcairn Islands, Tijuana
UTC -07:00
Arizona, Chihuahua, Dawson Creek, Mazatlan, Sonora, Mountain Time (US & Canada)
UTC -06:00
Cancun, Central America, Central Time (US & Canada), Easter Island, Galapagos Islands, Mexico City,
Monterrey, Saskatchewan
UTC -05:00
Atikokan, Bogota, Cayman Islands, Eastern Time (US & Canada), Grand Turk, Jamaica, Lima, Panama, Port-auPrince, Quito, Resolute, Havana
UTC -04:00
Asuncion, Atlantic Time (Canada), Bermuda, Blanc-Sablon, Caribbean Islands, Cuiaba, Georgetown, La Paz,
Manaus, Palmer Archipelago, Santiago, Stanley, Thule
UTC -03:30
St. John's
UTC -03:00
Brasilia, Buenos Aires, Cayenne, Greenland, Miquelon, Montevideo, Paramaribo, Rothera
UTC -02:00
Noronha, South Georgia Island
UTC -01:00
Azores, Scoresbysund, Cape Verde
UTC 00:00
Accra, Bamako, Casablanca, Dakar, Dublin, Edinburgh, Lisbon, London, Nouakchott, Reykjavik
UTC +01:00
Algiers, Amsterdam, Belgrade, Berlin, Bratislava, Brussels, Budapest, Copenhagen, Douala, Libreville, Luanda,
Madrid, Paris, Prague, Rome, Sarajevo, Skopje, Stockholm, Tunis, Vienna, Warsaw, Zagreb, Windhoek
UTC +02:00
Amman, Athens, Beirut, Bucharest, Cairo, Damascus, Harare, Helsinki, Istanbul, Jerusalem, Johannesburg,
Kaliningrad, Kiev, Kinshasa, Minsk, Nicosia, Riga, Sofia, Tripoli, Palestine
UTC +03:00
Addis Ababa, Aden, Antananarivo, Baghdad, Comoro Islands, Khartoum, Mayotte, Mogadishu, Moscow,
Nairobi, Qatar, Riyadh, Syowa
UTC +03:30
Tehran
UTC +04:00
Baku, Dubai, Mahe, Mauritius, Muscat, Reunion, Samara, Tbilisi, Yerevan
UTC +04:30
Kabul
UTC +05:00
Aqtau, Aqtobe, Ashgabat, Ekaterinburg, Karachi, Maldives, Samarkand, Kerguelen
UTC +05:30
Colombo, Kolkata
UTC +05:45
Kathmandu
UTC +06:00
Almaty, Bishkek, Chagos, Dhaka, Mawson, Omsk, Thimphu, Vostok, Novosibirsk
UTC +06:30
Cocos Islands, Yangon (Rangoon)
UTC +07:00
Bangkok, Christmas Island, Davis, Ho Chi Minh, Hovd, Jakarta, Krasnoyarsk
UTC +08:00
Casey, Chongqing, Hong Kong, Irkutsk, Kuala Lumpur, Makassar, Manila, Perth, Shanghai, Singapore, Taipei,
Ulaan Baatar
UTC +09:00
Dili, Jayapura, Palau, Pyongyang, Seoul, Tokyo, Yakutsk
UTC +09:30
Adelaide, Darwin
UTC +10:00
Brisbane, Dumont d'Urville, Guam, Hobart, Lindeman, Melbourne, Port Moresby, Saipan, Sydney, Vladivostok,
Sakhalin,
UTC +11:00
Efate, Guadalcanal, Kosrae, Magadan
UTC +12:00
Anadyr, Auckland, Fiji, Kamchatka, Marshall Islands, McMurdo
UTC +13:00
Tongatapu
Connecting Your Printer
69
3 Please Enter Date appears. Specify the date, and then press the
(Set) button.
4 Please Enter Time appears. Specify the time, and then press the
(Set) button.
The printer automatically restarts after selecting the
70
Connecting Your Printer
(Set) button.
8
Setting the IP Address
Assigning an IP Address
An IP address is a unique number that consists of four sections that are delimited by a period and can include up to
three digits in each section, for example, 111.222.33.44.
You can select the IP mode from Dual Stack, IPv4, and IPv6. If your network supports both IPv4 and IPv6, select
Dual Stack.
Select the IP mode of your environment, and then set IP address, subnet mask (for IPv4 only), and gateway address.
CAUTION: Assigning an IP address that is already in use can cause network performance issues.
NOTE: Assigning an IP address is considered as an advanced function and is normally done by a system administrator.
NOTE: When you assign an IP address manually in IPv6 mode, use the Dell™ Printer Configuration Web Tool. To display the Dell
Printer Configuration Web Tool, use the link-local address. To confirm the link-local address, print a printer settings report and
check the Link-Local Address under Network (Wired) or Network (Wireless).
For details about how to print a printer settings report, see "Report / List."
NOTE: If the Panel Lock Control is set to Enable, you need to enter the four digit password to enter the Admin
Settings menu.
NOTE: The images used in this manual are those of the Dell C3760dn Color Laser Printer unless otherwise mentioned.
When Using the Easy Setup Navigator
1 Insert the Software and Documentation disc provided with the printer in your computer. The Easy Setup
Navigator file launches automatically.
2 Click Advanced Tools on the Easy Setup Navigator window.
The Advanced Tools window opens.
3 Click IP Configuration.
4 Follow the instructions displayed on the screen.
When Using the Operator Panel
For more information on using the operator panel, see "Operator Panel."
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
(Set) button.
Setting the IP Address
71
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until TCP/IP is highlighted, and then press the
5 Press the
button until IPv4 is highlighted, and then press the
6 Press the
button until Get IP Address is highlighted, and then press the
7 Press the
button until Panel is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
NOTE: If the message This Setting Becomes Effective after Restart is displayed, press the
(Back) button.
8 Press the
(Back) button.
9 Press the
button until IP Address is highlighted, and then press the
(Set) button.
The cursor is located at the first octet of the IP address.
10 Use the number pad to enter the first octet of the IP address, and then Press the
button.
The cursor moves to the next digit.
NOTE: You can only enter one octet at a time and must press the
11 Enter the rest of the octets, and then press the
button after entering each octet.
(Set) button.
NOTE: If the message This Setting Becomes Effective after Restart is displayed, press the
(Back) button.
12 Press the
(Back) button.
13 Press the
button until Subnet Mask is highlighted, and then press the
(Set) button.
14 Repeat steps 11 and 12 to set Subnet Mask.
NOTE: If the message This Setting Becomes Effective after Restart is displayed, press the
(Back) button.
15 Press the
(Back) button.
16 Press the
button until Gateway Address is highlighted, and then press the
(Set) button.
17 Repeat steps 11 and 12 to set the Gateway Address.
18 Turn off the printer and then turn it on again.
When Using the Tool Box
1 Click Start→ All Programs→ Dell Printers→ Dell C3760 Color Laser Printer→ Tool Box.
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select TCP/IP Settings from the list at the left side of the page.
The TCP/IP Settings page appears.
4 Select the mode from IP Address Mode, and then enter the values in IP Address, Subnet Mask, and Gateway
Address.
5 Click Apply New Settings to take effect.
You can also assign the IP address to the printer when installing the printer drivers with the installer. When you use the
Network Installation feature, and the Get IP Address is set to AutoIP or DHCP on the printer, you can set the IP
address from 0.0.0.0 to the desired IP address on the printer selection window.
72
Setting the IP Address
Verifying the IP Settings
You can confirm the settings by using the operator panel, printing the printer settings report, or using the ping
command.
Verifying the Settings Using Operator Panel
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until TCP/IP is highlighted, and then press the
5 Press the
button until IPv4 is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Check the IP address displayed on the operator panel.
Verifying the Settings Using Printer Settings Report
1 Print the printer settings report.
For details about how to print a printer settings report, see "Report / List."
2 Verify the correct IP address, subnet mask, and gateway address are listed in the printer settings report under
Network (Wired) or Network (Wireless).
If the IP address shows 0.0.0.0 (the factory default), an IP address has not been assigned. To assign one for your
printer, see "Assigning an IP Address."
Verifying the Settings Using Ping Command
Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type ping
followed by the new IP address (for example, 192.168.0.11):
ping 192.168.0.11
If the printer is active on the network, you will receive a reply.
Setting the IP Address
73
74
Setting the IP Address
9
Loading Paper
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
NOTE: To avoid paper jams, do not remove the tray while printing is in progress.
1 Pull the tray out of the printer about 200 mm.
2 Hold the tray with both hands, and remove it from the printer.
3 Adjust the paper guides.
NOTE: Extend the front side of the tray when you load Legal size paper.
Loading Paper
75
4 Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level surface.
5 Load the print media into the tray with the recommended print side facing up.
NOTE: Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.
6 Align the width guides against the edges of the paper.
NOTE: When loading user-specified print media, adjust the width guides and slide the extendable part of the tray by
pinching the length guide and sliding it until it rests lightly against the edge of the paper.
7 After confirming that the guides are securely adjusted, insert the tray into the printer.
NOTE: If the front side of the tray is extended, the tray protrudes when it is inserted into the printer.
76
Loading Paper
8 On the operator panel, press the
(Set) button.
9 Press the
or
or
button until the desired paper size is highlighted, and then press the
button until the desired paper type is highlighted, and then press the
(Set) button.
Loading Paper
77
78
Loading Paper
10
Installing Printer Drivers on Windows® Computers
Identifying Printer Driver Pre-install Status
Before installing the printer driver on your computer, check the IP address of your printer by performing one of the
procedures in "Verifying the IP Settings."
Changing the firewall settings before installing your printer
If you are running one of the following operating systems, you must change the firewall settings before installing the
Dell printer software:
•
Microsoft® Windows XP
•
Windows Vista®
•
Windows 7
•
Windows 8
•
Windows Server® 2008
•
Windows Server 2008 R2
•
Windows Server 2012
NOTE: For Windows XP, Service Pack 2 or 3 must be installed.
The following procedure uses Windows 7 as an example.
1 Insert the Software and Documentation disc into your computer.
2 Click Start → Control Panel.
3 Select System and Security.
4 Click Allow a program through Windows Firewall.
5 Click Change settings → Allow another program.
6 Check Browse.
7 D:\setup_assist.exe (where D is the drive letter of the optical drive) in the File name text box, and then
click Open.
8 Click Add, and then click OK.
Inserting the Software and Documentation Disc
1 Insert the Software and Documentation disc into your computer and click setup_assist.exe to start Easy Setup
Navigator.
NOTE: If the Software and Documentation disc does not launch automatically, follow the procedure below.
For Windows XP, Windows Server® 2008, and Windows Server 2008 R2
Click start→ Run, enter D:\setup_assist.exe (where D is the drive letter of the optical drive) in the Run dialog
box, and then click OK.
For Windows Vista® and Windows 7
Click Start → All Programs → Accessories → Run, enter D:\setup_assist.exe (where D is the drive letter of
the optical drive) in the Run dialog box, and then click OK.
Installing Printer Drivers on Windows® Computers
79
For Windows 8 and Windows Server 2012
Point to the top or bottom right corner of the screen, and then click Search → Type Run in the search box, click Apps, and
then click Run → Type D:\setup_assist.exe (where D is the drive letter of the optical drive), and then click
OK.
Direct Connection Setup
For installing PCL and PS printer driver
1 In the Easy Setup Navigator window, click Installing Driver and Software to launch the installation software.
2 Select Personal Installation, and then click Next.
3 Follow the on-screen instructions to connect the computer and the printer with a USB cable, and then turn the
printer on.
The Plug and Play installation starts and the installation software proceeds to the next page automatically.
NOTE: If the installation software does not automatically proceed to the next page, click Install.
4 Select either Typical Installation (recommended) or Custom Installation from the installation wizard, and then
click Install. If you select Custom Installation, you can select the specific software you want to install.
5 Click Finish to exit the wizard when the Congratulations! screen appears.
Personal Installation
A personal printer is a printer connected to your computer or a print server using a USB. If your printer is connected
to a network and not your computer, see "Network Connection Setup."
For installing XML Paper Specification (XPS) printer driver
NOTE: XPS driver is supported on the following operating systems: Windows Vista, Windows Vista 64-bit Edition, Windows
Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008 R2, Windows 7, Windows 7 64-bit Edition, Windows 8,
Windows 8 64-bit Edition, and Windows Server 2012.
NOTE: If you are using Windows Vista or Windows Server 2008, you need to install Service Pack 2 or later, and then the
Windows Platform Update (KB971644). The update (KB971644) is available for download from Windows Update.
Windows Vista or Windows Vista 64-bit Edition
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Control Panel→ Hardware and Sound→ Printers.
3 Click Add a printer.
4 Click Add a local printer.
5 Select the port connected to this product, and then click Next.
6 Click Have Disk to display the Install From Disk dialog box.
7 Click Browse, and then select the extracted folder in step 1.
8 Click OK.
9 Select your printer name and click Next.
10 To change the printer name, enter the printer name in the Printer name box, and then click Next. To use this
printer as the default printer, select the check box displayed under the Printer name, and then click Next.
Installation starts.
If the User Account Control dialog box appears, click Continue.
80
Installing Printer Drivers on Windows® Computers
NOTE: If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
11 As the driver installation is completed, click Print a test page to print a test page.
12 Click Finish.
Windows Server 2008 or Windows Server 2008 64-bit Edition
NOTE: You must log in as an administrator.
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Control Panel→ Hardware and Sound→ Printers.
3 Click Add a printer.
4 Click Add a local printer.
5 Select the port connected to this product, and then click Next.
6 Click Have Disk to display the Install From Disk dialog box.
7 Click Browse, and then select the extracted folder in step 1.
8 Click OK.
9 Select your printer name and click Next.
10 To change the printer name, enter the printer name in the Printer name box, and then click Next.
To use this printer as the default printer, select the Set as the default printer check box, and then click Next.
11 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it.
12 Click Next.
Installation starts.
13 As the driver installation is completed, click Print a test page to print a test page.
14 Click Finish.
Windows 7, Windows 7 64-bit Edition, or Windows Server 2008 R2
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Devices and Printers.
3 Click Add a printer.
When you use Windows Server 2008 R2, click Add a local or network printer as an administrator.
If the User Account Control dialog box appears, click Yes.
NOTE: If you are an administrator on the computer, click Yes; otherwise, contact your administrator to continue the desired
action.
4 Click Add a local printer.
5 Select the port connected to this product, and then click Next.
6 Click Have Disk to display the Install From Disk dialog box.
7 Click Browse, and then select the extracted folder in step 1.
8 Click OK.
9 Select your printer name and click Next.
Installing Printer Drivers on Windows® Computers
81
10 To change the printer name, enter the printer name in the Printer name box, and then click Next.
To use this printer as the default printer, select the Set as the default printer check box, and then click Next.
11 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it.
12 Click Next.
Installation starts.
13 As the driver installation is completed, click Print a test page to print a test page.
14 Click Finish.
Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1 Extract the zip file you downloaded to your desired location.
2 Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel.
3 Click Hardware and Sound (Hardware for Windows Server 2012) → Devices and Printers → Add a printer.
4 Click Have Disk to display the Install From Disk dialog box.
5 Click Browse, and then select the extracted folder in step 1.
6 Click OK.
7 Select your printer name and click Next.
8 To change the printer name, enter the printer name in the Printer name box, and then click Next. Installation
starts.
9 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it. Click Next.
10 As the driver installation is completed, click Print a test page to print a test page. To use this printer as the default
printer, select the Set as the default printer check box.
11 Click Finish.
Network Connection Setup
NOTE: To use this printer in a Linux environment, you need to install a Linux driver. For more information on how to install and
use these, see "Installing Printer Drivers on Linux Computers (CUPS)."
Network Printer Setup on a Local Network
For installing PCL and PS printer driver
1 In the Easy Setup Navigator window, click Installing Driver and Software to launch the installation software.
2 Select Network Installation, and then click Next.
3 Select Local Installation, and then click Next.
4 Select the printer you want to install from the printer list, and then click Next. If the target printer is not displayed
on the list, click Refresh to refresh the list or click Add Printer to add a printer to the list manually. You may specify
the IP address and port name at this point.
If you have installed this printer on the server computer, select the I am setting up this printer on a server check
box.
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a valid IP
address.
82
Installing Printer Drivers on Windows® Computers
NOTE: In some cases, Windows Security Alert is displayed in this step when you use Windows Vista, Windows Vista 64-
bit Edition, Windows Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008 R2, Windows 7, Windows 7 64bit Edition, Windows 8, Windows 8 64-bit Edition, Windows Server 2012. In this case, select Unblock (Allow access for
Windows Server 2008 R2 and Windows 7), and then continue the procedure.
5 Specify the printer settings, and then click Next.
a
Enter the printer name.
b
If you want other users on the network to access the printer, select Share this printer with other computers on
the network, and then enter a share name that users can identify.
c
If you want to set the printer as the default printer, select the Set this printer as default check box.
d
If you want to restrict color printing, select the appropriate Dell™ ColorTrack option. Enter the password
when Color-Password Enabled is selected for Dell ColorTrack.
e
If you want to install the PostScript printer driver, select the PostScript Driver check box.
6 Select the software and documentation you want to install, and then click Next. If you want to change the
installation destination, click Browse and specify a new location.
7 Click Install.
8 Click Finish to exit the wizard when the Congratulations! screen appears.
For installing XML Paper Specification (XPS) printer driver
NOTE: XPS driver is supported on the following operating systems: Windows Vista, Windows Vista 64-bit Edition, Windows
Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008 R2, Windows 7, Windows 7 64-bit Edition, Windows 8,
Windows 8 64-bit Edition, and Windows Server 2012.
Windows Vista or Windows Vista 64-bit Edition
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Control Panel→ Hardware and Sound→ Printers.
3 Click Add a printer.
4 Click Add a network, wireless or Bluetooth printer.
5 Select printer or click The printer that I want isn't listed.
6 Select Add a printer using a TCP/IP address or host name, and then click Next.
7 Select TCP/IP Device from Device type, and enter the IP address for Hostname or IP address, and then click
Next.
If the User Account Control dialog box appears, click Continue.
NOTE: If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
8 Click Have Disk to display the Install From Disk dialog box.
9 Click Browse, and then select the extracted folder in step 1.
10 Click OK.
11 Select your printer name and click Next.
12 To change the printer name, enter the printer name in the Printer name box, and then click Next.
To use this printer as the default printer, select the Set as the default printer check box, and then click Next.
Installation starts.
13 As the driver installation is completed, click Print a test page to print a test page.
Installing Printer Drivers on Windows® Computers
83
14 Click Finish.
Windows Server 2008 or Windows Server 2008 64-bit Edition
NOTE: You must log in as an administrator.
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Control Panel→ Hardware and Sound→ Printers.
3 Click Add a printer.
4 Click Add a network, wireless or Bluetooth printer.
5 Select printer or click The printer that I want isn't listed.
When you select your printer, go to step 8.
When you click The printer that I want isn't listed, go to step 6.
6 Select Add a printer using a TCP/IP address or host name, and then click Next.
7 Select TCP/IP Device from Device type, and enter the IP address for Hostname or IP address, and then click
Next.
If the User Account Control dialog box appears, click Continue.
NOTE: If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
8 Click Have Disk to display the Install From Disk dialog box.
9 Click Browse, and then select the extracted folder in step 1.
10 Click OK.
11 Select your printer name and click Next.
12 To change the printer name, enter the printer name in the Printer name box, and then click Next.
To use this printer as the default printer, select the Set as the default printer check box, and then click Next.
13 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it.
14 Click Next.
Installation starts.
15 As the driver installation is completed, click Print a test page to print a test page.
16 Click Finish.
Windows Server 2008 R2
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Devices and Printers.
3 Click Add a printer.
4 Click Add a network, wireless or Bluetooth printer.
5 Select printer or click The printer that I want isn't listed.
NOTE: When you click The printer that I want isn't listed, Find a printer by name or TCP/IP address screen appears. Find your
printer on the screen.
If the User Account Control dialog box appears, click Continue.
84
Installing Printer Drivers on Windows® Computers
NOTE: If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
6 Click Have Disk to display the Install From Disk dialog box.
7 Click Browse, and then select the extracted folder in step 1.
8 Click OK.
9 Select your printer name and click Next.
10 To change the printer name, enter the printer name in the Printer name box, and then click Next.
To use this printer as the default printer, select the Set as the default printer check box, and then click Next.
11 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it.
12 Click Next.
Installation starts.
13 As the driver installation is completed, click Print a test page to print a test page.
14 Click Finish.
Windows 7 or Windows 7 64-bit Edition
1 Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS_3760.zip (where D is the drive letter of the optical drive)
2 Click Start→ Devices and Printers.
3 Click Add a printer.
4 Click Add a network, wireless or Bluetooth printer.
5 Select printer or click The printer that I want isn't listed.
When you select your printer, go to step 8.
When you click The printer that I want isn't listed, go to step 6.
6 Select Add a printer using a TCP/IP address or host name, and then click Next.
7 Select TCP/IP Device from Device type, and enter the IP address for Hostname or IP address, and then click
Next.
If the User Account Control dialog box appears, click Yes.
NOTE: If you are an administrator on the computer, click Yes; otherwise, contact your administrator to continue the desired
action.
8 Click Have Disk to display the Install From Disk dialog box.
9 Click Browse, and then select the extracted folder in step 1.
10 Click OK.
11 Select your printer name and click Next.
12 To change the printer name, enter the printer name in the Printer name box, and then click Next.
To use this printer as the default printer, select the Set as the default printer check box, and then click Next.
13 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it.
14 Click Next.
Installation starts.
15 As the driver installation is completed, click Print a test page to print a test page.
Installing Printer Drivers on Windows® Computers
85
16 Click Finish.
Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1 Extract the zip file you downloaded to your desired location.
2 Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel.
3 Click Hardware and Sound (Hardware for Windows Server 2012) → Devices and Printers → Add a printer.
4 Click Have Disk to display the Install From Disk dialog box.
5 Click Browse, and then select the extracted folder in step 1.
6 Click OK.
7 Select your printer name and click Next.
8 To change the printer name, enter the printer name in the Printer name box, and then click Next. Installation
starts.
9 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer
so that others on your network can find and use it. Click Next.
10 As the driver installation is completed, click Print a test page to print a test page. To use this printer as the default
printer, select the Set as the default printer check box.
11 Click Finish.
Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your
desk. You can view and/or change the printer settings, monitor toner level, and acknowledge the timing of ordering
replacement consumables. You can click the Dell supplies link for ordering supplies.
NOTE: The Dell Printer Configuration Web Tool is not available when the printer is directly connected to a computer or a print
server.
To launch the Dell Printer Configuration Web Tool, type the printer's IP address in your web browser. The printer
configuration appears on the screen.
You can set up the Dell Printer Configuration Web Tool to send you an e-mail when the printer needs supplies or
intervention.
To set up e-mail alerts:
1 Launch the Dell Printer Configuration Web Tool.
2 Click E-Mail Alert link.
3 Under E-Mail Server Settings, enter the Primary SMTP Gateway, Reply Address, and your or key operator's e-mail
address in the e-mail list box.
4 Click Apply New Settings.
NOTE: Connection pending until printer sends an alert is displayed on the SMTP server until an error occurs.
Network Printer Setup on a Remote Network
Before Installation
Before you start remote installation, perform the following procedures.
Allow Print Spooler to Accept Client Connections
NOTE: This procedure is required for Windows XP 64-bit Edition, Windows Server 2003, Windows Server 2003 x64 Edition,
Windows Vista, Windows Vista 64-bit Edition, Windows Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008
R2, Windows 7, and Windows 7 64-bit Edition.
For Windows XP, Windows Server 2003, Windows Vista, and Windows Server 2008:
86
Installing Printer Drivers on Windows® Computers
1 Open the Run dialog box.
For Windows XP, Windows Server 2003, Windows Server 2008, click start→ All Programs → Accessories → Run.
For Windows Vista, click Start→ Run.
2 Type gpedit.msc, and then click OK.
3 Click Computer Configuration→ Administrative Templates→ Printers.
4 Right-click Allow Print Spooler to accept client connections and select Properties.
5 On the Setting tab, select Enabled, and then click OK.
6 Restart the computer.
For Windows Server 2008 R2 and Windows 7:
1 Open the Run dialog box.
For Windows Server 2008 R2, click Start→ Run.
For Windows 7, click Start→ All Programs→ Accessories→ Run.
2 Type gpedit.msc, and then click OK.
3 Click Computer Configuration→ Administrative Templates→ Printers.
4 Right-click Allow Print Spooler to accept client connections and select Edit.
5 Select Enabled, and then click OK.
6 Restart the computer.
Change the Firewall Setting to Share File and Printer
NOTE: This procedure is required for Windows XP, Windows XP 64-bit Edition, Windows Vista, Windows Vista 64-bit Edition,
Windows Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008 R2, Windows 7, and Windows 7 64-bit Edition.
For Windows XP:
1 Click start→ Control Panel.
2 Select Security Center.
3 Click Windows Firewall.
4 On the Exceptions tab, select the File and Printer Sharing check box, and then click OK.
For Windows Vista:
1 Click Start→ Control Panel.
2 Select Security.
3 Click Windows Firewall.
4 Click Change settings.
5 Click Continue.
6 On the Exceptions tab, select the File and Printer Sharing check box, and then click OK.
For Windows Server 2008:
1 Click Start→ Control Panel.
2 Double-click Windows Firewall.
3 Click Change settings.
4 On the Exceptions tab, select the File and Printer Sharing check box, and then click OK.
For Windows Server 2008 R2 and Windows 7:
1 Click Start→ Control Panel.
Installing Printer Drivers on Windows® Computers
87
2 Select System and Security.
3 Click Windows Firewall.
4 Click Allow a program or feature through Windows Firewall.
5 If the check boxes under Allowed programs and features: are dimmed, click Change settings.
6 Select the File and Printer Sharing check box. Home/Work (Private) or Public check box is automatically selected
according to your settings.
If the File and Printer Sharing Properties dialog box appears, click OK.
7 Click OK.
Start Remote Registry
NOTE: This procedure is required for Windows Vista, Windows Vista 64-bit Edition, Windows 7, and Windows 7 64-bit Edition.
1 Click Start→ Control Panel.
2 Select System and Maintenance (System and Security for Windows 7).
3 Click Administrative Tools.
4 Double-click Services.
5 Click Continue (for Windows Vista only).
6 Right-click Remote Registry and select Start.
7 Right-click Remote Registry and select Properties.
8 Change Startup type to Automatic, and then click OK.
Disable User Account Control
CAUTION: Disabling the User Account Control might leave the system vulnerable to virus attacks.
NOTE: This procedure is required for Windows Vista, Windows Vista 64-bit Edition, Windows Server 2008, Windows Server 2008
64-bit Edition, Windows Server 2008 R2, Windows 7, and Windows 7 64-bit Edition.
For Windows Vista:
1 Click Start→ Control Panel.
2 Select User Accounts and Family Safety.
3 Click User Accounts.
4 Click Turn User Account Control on or off.
5 Click Continue.
6 Clear the Use User Account Control (UAC) to help protect your computer check box.
7 Restart the computer.
For Windows Server 2008:
1 Click Start→ Control Panel.
2 Double-click User Accounts.
3 Click Turn User Account Control on or off.
4 Clear the Use User Account Control (UAC) to help protect your computer check box.
5 Click OK.
6 Restart the computer.
For Windows Server 2008 R2:
1 Click Start→ Control Panel.
88
Installing Printer Drivers on Windows® Computers
2 Select User Accounts.
3 Click Change User Account Control Settings.
4 Move the slider to the bottom, and then click OK.
5 Restart the computer.
For Windows 7:
1 Click Start→ Control Panel.
2 Select User Accounts and Family Safety.
3 Click User Accounts.
4 Click Change User Account Control Settings.
5 Move the slider to the bottom, and then click OK.
6 Click Yes in the User Account Control dialog box.
7 Restart the computer.
Enable Network Discovery and File Sharing for all Public Networks
NOTE: This procedure is required when you use Windows Vista, Windows Vista 64-bit Edition, Windows Server 2008, Windows
Server 2008 64-bit Edition, Windows Server 2008 R2, Windows 7, and Windows 7 64-bit Edition for the server computer.
1 Click Start→ Network (Start→ your user name→ Network for Windows 7).
2 Click Network discovery and file sharing are turned off. Network computers and devices are not visible. Click to
change.
3 Click Turn on network discovery and file sharing.
4 Click Yes, turn on network discovery and file sharing for all public networks.
Disable Simple File Sharing
NOTE: This procedure is required for Windows XP, and Windows XP 64-bit Edition.
1 Click start→ Control Panel.
2 Select Appearance and Themes.
3 Select Folder Options.
4 On the View tab, clear the Use simple file sharing (Recommended) check box, and then click OK.
5 Click Start→ Control Panel.
6 Select Performance and Maintenance.
7 Select Administrative Tools.
8 Click Local Security Policy.
9 Click Local Policies→ Security Options.
10 Right-click Network access: Sharing and security model for local accounts and select Properties.
11 Ensure Classic - local users authenticate as themselves is selected.
Installing the Printer Driver
NOTE: Installation is not supported on Windows XP Home Edition, Windows Vista Home Basic, Windows Vista Home Premium,
Windows Vista Home Basic 64-bit Edition, Windows Vista Home Premium 64-bit Edition, Windows 7 Starter, Windows 7 Home
Basic, Windows 7 Home Premium, Windows 7 Home Basic 64-bit Edition, Windows 7 Home Premium 64-bit Edition, Windows 8,
Windows 8 64-bit Edition, Windows 8 Pro, Windows 8 Pro 64-bit Edition, and Windows Server 2012.
1 In the Easy Setup Navigator window, click Software Installation to launch the installation software.
Installing Printer Drivers on Windows® Computers
89
2 Select Network Installation, and then click Next.
3 Select Remote Installation, and then click Next.
a
Enter the computer name, user ID, and password, and then click Add.
b
Click Next.
NOTE: Windows Security Alert may appear on Windows Vista, Windows Vista 64-bit Edition, Windows Server 2008,
Windows Server 2008 64-bit Edition, Windows Server 2008 R2, Windows 7, or Windows 7 64-bit Edition. In this case, select
Unblock (Allow access for Windows Server 2008 R2 and Windows 7), and then continue the procedure.
4 Select a printer from the printer list, and then click Next. If the target printer is not displayed on the list, click
Refresh to refresh the list or click Add Printer to add a printer to the list manually. You may specify the IP address
and port name at this point.
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you continue, you must enter a valid IP address.
5 Specify the printer settings, and then click Next.
a
Enter the printer name.
b
If you want other users on the network to access this printer, select the Share this printer with other
computers on the network, and then enter a share name that users can identify.
c
If you want to set the printer as default, select the Set this printer as default check box.
d
If you want to restrict color printing, select the appropriate Dell ColorTrack option. Enter the password when
Color-Password Enabled is selected for Dell ColorTrack.
6 Select the software and documentation you want to install, and then click Next.
If you want to change the installation destination, click Input and specify a new location.
7 Click Install.
8 Click Finish to exit the wizard when the Congratulations! screen appears.
Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your
desk. You can view and/or change the printer settings, monitor toner level, and acknowledge the timing of ordering
replacement consumables. You can click the Dell supplies link for ordering supplies.
NOTE: The Dell Printer Configuration Web Tool is not available when the printer is directly connected to a computer or a print
server.
To launch the Dell Printer Configuration Web Tool, type the printer's IP address in your web browser. The printer
configuration appears on the screen.
You can set up the Dell Printer Configuration Web Tool to send you an e-mail when the printer needs supplies or
intervention.
To set up e-mail alerts:
1 Launch the Dell Printer Configuration Web Tool.
2 Click E-Mail Alert link.
3 Under E-Mail Server Settings, enter the Primary SMTP Gateway, Reply Address, and your or key operator's e-mail
address in the e-mail list box.
4 Click Apply New Settings.
NOTE: Connection pending until printer sends an alert is displayed on the SMTP server until an error occurs.
90
Installing Printer Drivers on Windows® Computers
Setting Up for Shared Printing
You can share your new printer on the network using the Software and Documentation disc that comes with your
printer, or using Microsoft® point-and-print or peer-to-peer method. However, if you use one of the Microsoft
methods, some features, such as the status monitor and other printer utilities, installed with the Software and
Documentation disc, may not be available.
If you want to use the printer on a network, share the printer and install its drivers on all the computers on the
network.
NOTE: You need to purchase an Ethernet cable for shared printing.
Specifying the Shared Settings of the Printer
Windows XP, Windows XP 64-bit Edition, Windows Server 2003, or Windows Server 2003 x64 Edition
1 Click start→ Printers and Faxes.
2 Right-click the printer icon and select Properties.
3 On the Sharing tab, select the Share this printer check box, and then type a name in the Share name text box.
4 Click Additional Drivers and select the operating systems of all network clients that print to the printer.
5 Click OK.
If you are missing files, you are prompted to insert the server operating system CD.
Windows Vista or Windows Vista 64-bit Edition
1 Click Start→ Control Panel→ Hardware and Sound→ Printers.
2 Right-click the printer icon and select Sharing.
3 Click Change sharing options.
The message Windows needs your permission to continue appears.
4 Click Continue.
5 Select the Share this printer check box, and then type a name in the Share name text box.
6 Click Additional Drivers and select the operating systems of all network clients that print to the printer.
7 Click OK.
Windows Server 2008 or Windows Server 2008 64-bit Edition
1 Click Start→ Control Panel→ Printers.
2 Right-click the printer icon and select Sharing.
3 Click Change Sharing Options if exists.
4 Select the Share this printer check box, and then type a name in the Share name text box.
5 Click Additional Drivers and select the operating systems of all network clients that print to the printer.
6 Click OK.
Windows 7, Windows 7 64-bit Edition, or Windows Server 2008 R2
1 Click Start→ Devices and Printers.
2 Right-click the printer icon and select Printer properties.
3 On the Sharing tab, click Change Sharing Options if exists.
Select the Share this printer check box, and then type a name in the Share name text box.
Installing Printer Drivers on Windows® Computers
91
4 Click Additional Drivers and select the operating systems of all network clients that print to the printer.
5 Click Apply, and then click OK.
Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel → Hardware
and Sound (Hardware for Windows Server 2012) → Devices and Printers.
2 Right-click the printer icon and select Printer properties.
3 On the Sharing tab, click Change Sharing Options if exists.
4 Select the Share this printer check box, and then type a name in the Share name text box.
5 Click Additional Drivers and select the operating systems of all network clients using this printer.
6 Click Apply, and then click OK.
To confirm that the printer is properly shared:
•
Ensure that the printer object in the Printers, Printers and Faxes, or Devices and Printers folder is shared. The
shared icon is shown under the printer icon.
•
Browse Network or My Network Places. Find the host name of the server and the shared name you assigned to the
printer.
Now that the printer is shared, you can install the printer on network clients using the point and print method or the
peer-to-peer method.
NOTE: If the OS bit editions (32/64 bit edition) differ between a print server and a client computer, you need to manually add the
printer driver for the client computer edition on the server. Otherwise, the printer driver cannot be installed on the client
computer using the point and print or peer-to-peer method. For example, if the print server runs on Windows XP 32-bit edition,
while the client computer runs on Windows 7 64-bit edition, follow the procedures below to additionally install the printer driver
for 64-bit client on the 32-bit server.
a
Click Additional Drivers on the screen for sharing printers.
For details about how to display this screen, see "Specifying the Shared Settings of the Printer."
b
Select the x64 check box, and then click OK.
c
Insert the Software and Documentation disc into your computer.
d
Click Browse to specify the folder that contains the 64-bit OS driver, and then click OK.
Installation starts.
Point and Print
Point and Print is a Microsoft Windows technology that allows you to connect to a remote printer. This feature
automatically downloads and installs the printer driver.
Windows XP, Windows XP 64-bit Edition, Windows Server 2003, or Windows Server 2003 x64 Edition
1 On the Windows desktop of the client computer, double-click My Network Places.
2 Locate the host name of the server computer, and then double-click the host name.
92
Installing Printer Drivers on Windows® Computers
3 Right-click the shared printer name, and then click Connect.
Wait for the driver information to be copied from the server computer to the client computer, and for a new printer
object to be added to the Printers and Faxes folder. The copy time varies, based on network traffic and other
factors.
4 Close My Network Places.
5 Print a test page to verify installation.
a
Click start→ Printers and Faxes.
b
Select the printer you just created.
c
Click File→ Properties.
d
On the General tab, click Print Test Page.
When a test page prints successfully, installation is complete.
Windows Vista or Windows Vista 64-bit Edition
1 On the Windows desktop of the client computer, click Start→ Network.
2 Locate the host name of the server computer, and then double-click the host name.
3 Right-click the shared printer name, and then click Connect.
4 Click Install driver.
5 Click Continue in the User Account Control dialog box.
6 Wait for the driver information to be copied from the server computer to the client computer, and for a new printer
object to be added to the Printers folder. The time this takes varies, based on network traffic and other factors.
7 Print a test page to verify installation.
a
Click Start→ Control Panel→ Hardware and Sound.
b
Select Printers.
c
Right-click the printer you just created and click Properties.
d
On the General tab, click Print Test Page.
When a test page prints successfully, installation is complete.
Installing Printer Drivers on Windows® Computers
93
Windows Server 2008 or Windows Server 2008 64-bit Edition
1 On the Windows desktop of the client computer, click Start→ Network.
2 Locate the host name of the server computer, and then double-click the host name.
3 Right-click the shared printer name, and then click Connect.
4 Click Install driver.
5 Wait for the driver information to be copied from the server computer to the client computer, and for a new printer
object to be added to the Printers folder. The time this takes varies, based on network traffic and other factors.
6 Print a test page to verify installation.
a
Click Start→ Control Panel.
b
Select Printers.
c
Right-click the printer you just created and select Properties.
d
On the General tab, click Print Test Page.
When a test page prints successfully, installation is complete.
Windows 7, Windows 7 64-bit Edition, or Windows Server 2008 R2
1 On the Windows desktop of the client computer, click Start→ your user name→ Network (Start→ Network for
Windows Server 2008 R2).
2 Locate the host name of the server computer, and then double-click the host name.
3 Right-click the shared printer name, and then click Connect.
4 Click Install driver.
5 Wait for the driver information to be copied from the server computer to the client computer, and for a new printer
object to be added to the Devices and Printers folder. The time this takes varies, based on network traffic and other
factors.
6 Print a test page to verify installation.
a
Click Start→ Devices and Printers.
b
Right-click the printer you just created and select Printer properties.
c
On the General tab, click Print Test Page.
When a test page prints successfully, installation is complete.
Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1 Point to the top or bottom right corner of the screen, and then click Search → Type Network in the search box,
click Apps, and then click Network.
2 Locate the host name of the server computer, and then double-click the host name.
3 Right-click the shared printer name, and then click Connect.
4 Click Install driver.
5 Wait for the driver information to be copied from the server computer to the client computer, and for a new printer
object to be added to the Devices and Printers folder. The time this takes varies, based on network traffic and other
factors.
6 Print a test page to verify installation.
94
a
Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel →
Hardware and Sound (Hardware for Windows Server 2012) → Devices and Printers.
b
Right-click the printer you just created and select Printer properties.
Installing Printer Drivers on Windows® Computers
c
On the General tab, click Print Test Page.
When a test page is printed successfully, installation is complete.
Peer-to-Peer
If you use the peer-to-peer method, the printer driver is fully installed on each client computer. Network clients
retain control of driver modifications. The client computer handles the print job processing.
Windows XP, Windows XP 64-bit Edition, Windows Server 2003, or Windows Server 2003 x64 Edition
1 Click start→ Printers and Faxes.
2 Click Add a Printer.
3 Click Next.
4 Select A network printer, or a printer attached to another computer, and then click Next. If the printer is not
listed, type the path to the printer in the text box.
For example:\\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it on the network. The shared printer
name is the name assigned during the server installation process.
5 Click Browse for a printer, and then click Next.
If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, you need to
specify the path to available drivers.
6 Select Yes if you want this printer to be set as the default printer, and then click Next.
If you want to verify installation, click Yes to print a test page.
7 Click Finish.
When a test page prints successfully, installation is complete.
Installing Printer Drivers on Windows® Computers
95
Windows Vista or Windows Vista 64-bit Edition
1 Click Start→ Control Panel→ Hardware and Sound→ Printers.
2 Click Add a Printer to launch the Add Printer wizard.
3 Select Add a network, wireless or Bluetooth printer, and then click Next. If the printer is listed, select the printer
and click Next, or select The printer that I want isn't listed and type in the path of the printer in the Select a
shared printer by name text box and click Next.
For example:\\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it on the network. The shared printer
name is the name assigned during the server installation process.
If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, you need to
specify the path to available drivers.
4 Select Yes if you want this printer to be set as the default printer, and then click Next.
5 If you want to verify installation, click Print a test page.
6 Click Finish.
When a test page prints successfully, installation is complete.
Windows Server 2008 or Windows Server 2008 64-bit Edition
1 Click Start→ Control Panel→ Printers.
2 Click Add a Printer.
3 Select Add a network, wireless or Bluetooth printer, and then click Next. If the printer is listed, select the printer
and click Next, or select The printer that I want isn't listed and type the path to the printer in the Select a shared
printer by name text box and click Next.
For example: \\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it on the network. The shared printer
name is the name assigned during the server installation process.
If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, then you will
need to provide a path to available drivers.
4 Select Yes if you want this printer to be set as the default printer, and then click Next.
5 Click Print a test page if you want to verify installation.
6 Click Finish.
When a test page prints successfully, installation is complete.
96
Installing Printer Drivers on Windows® Computers
Windows 7, Windows 7 64-bit Edition, or Windows Server 2008 R2
1 Click Start → Devices and Printers.
2 Click Add a Printer.
3 Select Add a network, wireless or Bluetooth printer. If the printer is listed, select the printer and click Next, or
select The printer that I want isn't listed. Click Select a shared printer by name and type in the path of the printer
in the text box, and then click Next.
For example: \\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it to the network. The shared printer name
is the name assigned during the server installation process.
If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, then you will
need to provide the path to the available driver.
4 Confirm the printer name, and then click Next.
5 Select Yes if you want this printer to be set as the default printer, and then click Next.
6 Click Print a test page if you want to verify installation.
7 Click Finish.
When a test page prints successfully, installation is complete.
Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1 Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel → Hardware
and Sound (Hardware for Windows Server 2012) → Devices and Printers.
2 Click Add a Printer to launch the Add Printer wizard.
3 If the printer is listed, select the printer and click Next, or select The printer that I want isn't listed. Click Select a
shared printer by name and type in the path of the printer in the text box, and then click Next.
For example: \\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it to the network. The shared printer name
is the name assigned during the server installation process.
If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, then you will
need to provide the path to the available driver.
4 Confirm the printer name, and then click Next.
5 Select Yes if you want this printer to be set as the default printer, and then click Next.
6 Click Print a test page if you want to verify installation.
7 Click Finish.
When a test page is printed successfully, installation is complete.
Installing Printer Drivers on Windows® Computers
97
98
Installing Printer Drivers on Windows® Computers
11
Installing Printer Drivers on Macintosh Computers
Installing the Drivers and Software
1 Run the Software and Documentation disc on the Macintosh computer.
2 Double-click the Dell C3760 Installer icon, and then click Continue.
3 When the popup dialog box prompts you for confirming the program included in the installation package, click
Continue.
4 Click Continue on the Important Information screen.
5 Select a language for the Software License Agreement.
6 After reading the Software License Agreement, click Continue.
7 If you agree to the terms of the Software License Agreement, click Agree to continue the installation process.
8 Confirm the installation location.
9 Click Install to perform the standard installation.
If you want to select a custom installation, click Customize to select items that you want to install.
•
Dell C3760 Printer Driver
•
Dell Printer Status Monitor
10 Type the administrator's name and password, and then click OK (Install Software for Mac OS X 10.7 and Mac OS
X 10.8).
11 When the installation is complete, click Close.
Adding a Printer on Mac OS X 10.5, 10.6, 10.7, or 10.8
When Using a USB connection
1 Turn on the printer.
2 Connect the USB cable between the printer and the Macintosh computer.
The printer is automatically added to your Macintosh computer.
When Using IP Printing
1 Turn on the printer.
2 Ensure that Macintosh computer and the printer are connected.
If you use wired connection, connect the LAN cable between the printer and the network.
If you use wireless connection, ensure that wireless connection is configured properly on your Macintosh computer
and the printer.
3 Open the System Preferences, and click Print & Fax (Print & Scan for Mac OS X 10.7 and Mac OS X 10.8).
4 Click the Plus (+) sign, and click IP.
5 Select Line Printer Daemon - LPD for Protocol.
6 Type the IP address for the printer in the Address area.
7 Select Dell C3760dn Color Laser for Print Using.
NOTE: When printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.
Installing Printer Drivers on Macintosh Computers
99
8 Click Add.
9 Specify the options that have been installed on the printer, and then click Continue.
10 Confirm that the printer is displayed in the Print & Fax (Print & Scan for Mac OS X 10.7 and Mac OS X 10.8)
dialog box.
When Using Bonjour
1 Turn on the printer.
2 Ensure that Macintosh computer and the printer are connected.
If you use wired connection, connect the LAN cable between the printer and the network.
If you use wireless connection, ensure that wireless connection is configured properly on your Macintosh computer
and the printer.
3 Open the System Preferences, and click Print & Fax (Print & Scan for Mac OS X 10.7 and Mac OS X 10.8).
4 Click the Plus (+) sign, and click Default.
5 Select the printer connected via Bonjour from the Printer Name list.
6 Name and Print Using (Use for Mac OS X 10.8) are automatically entered.
7 Click Add.
8 Specify the options that have been installed on the printer, and then click Continue.
9 Confirm that the printer is displayed in the Print & Fax (Print & Scan for Mac OS X 10.7 and Mac OS X 10.8)
dialog box.
Adding a Printer on Mac OS X 10.4.11
When Using a USB Connection
1 Turn on the printer.
2 Connect the USB cable between the printer and the Macintosh computer.
3 Start Printer Setup Utility.
NOTE: You can find Printer Setup Utility in the Utilities folder in Applications.
4 Click Add.
5 Click Default Browser in the Printer Browser dialog box.
6 Select the printer connected via USB from the Printer list.
7 Name and Print Using are automatically entered.
8 Click Add.
When Using IP Printing
1 Turn on the printer.
2 Ensure that Macintosh computer and the printer are connected.
If you use wired connection, connect the LAN cable between the printer and the network.
If you use wireless connection, ensure that wireless connection is configured properly on your Macintosh computer
and the printer.
3 Start Printer Setup Utility.
NOTE: You can find Printer Setup Utility in the Utilities folder in Applications.
4 Click Add.
100
Installing Printer Drivers on Macintosh Computers
5 Click IP Printer in the Printer Browser dialog box.
6 Select Line Printer Daemon - LPD for Protocol.
7 Type the IP address for the printer in the Address area.
8 Select Dell C3760dn Color Laser for Print Using.
NOTE: When printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.
NOTE: Entry of Location is optional.
9 Click Add.
When Using Bonjour
1 Turn on the printer.
2 Ensure that Macintosh computer and the printer are connected.
If you use wired connection, connect the LAN cable between the printer and the network.
If you use wireless connection, ensure that wireless connection is configured properly on your Macintosh computer
and the printer.
3 Start the Printer Setup Utility.
NOTE: You can find Printer Setup Utility in the Utilities folder in Applications.
4 Click Add.
5 Click Default Browser in the Printer Browser dialog box.
6 Select the printer connected via Bonjour from the Printer Name list.
7 Name and Print Using are automatically entered.
8 Click Add.
9 Specify the options installed to the printer, and then click Continue.
10 Confirm that the printer is displayed on the Printer list dialog box.
Adding a Printer on Mac OS X 10.3.9
When Using a USB connection
1 Turn on the printer.
2 Connect the USB cable between the printer and the Macintosh computer.
3 Start Printer Setup Utility.
NOTE: You can find Printer Setup Utility in the Utilities folder in Applications.
4 Click Add.
5 Select USB from the menu.
The Printer Model is automatically selected.
6 Click Add.
Installing Printer Drivers on Macintosh Computers
101
When Using IP Printing
1 Turn on the printer.
2 Ensure that Macintosh computer and the printer are connected.
If you use wired connection, connect the LAN cable between the printer and the network.
If you use wireless connection, ensure that wireless connection is configured properly on your Macintosh computer
and the printer.
3 Start Printer Setup Utility.
NOTE: You can find Printer Setup Utility in the Utilities folder in Applications.
4 Click Add in the Printer List dialog box.
5 Select IP Printing from the menu.
6 Select LPD/LPR for Printer Type.
7 Type the IP address for the printer in the Address area.
8 Select Dell for Printer Model, and select Dell C3760dn Color Laser.
NOTE: When printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.
9 Click Add.
When Using Rendezvous (Bonjour)
1 Turn on the printer.
2 Ensure that Macintosh computer and the printer are connected.
If you use wired connection, connect the LAN cable between the printer and the network.
If you use wireless connection, ensure that wireless connection is configured properly on your Macintosh computer
and the printer.
3 Start Printer Setup Utility.
NOTE: You can find Printer Setup Utility in the Utilities folder in Applications.
4 Click Add in the Printer List dialog box.
5 Select Rendezvous from the menu.
6 Select Dell for Printer Model, and select Dell C3760dn Color Laser.
7 Click Add.
102
Installing Printer Drivers on Macintosh Computers
Configuring Settings
All the optional accessories are verified as installed.
Mac OS X 10.5, 10.6, 10.7, or 10.8
1 Open the System Preferences, and click Print & Fax (Print & Scan for Mac OS X 10.7 and Mac OS X 10.8).
2 Select the printer in the Printer Name list, and click Options & Supplies.
3 Select Driver, and select the options that have been installed in the printer, and then click OK.
Mac OS X 10.3.9 or 10.4.11
1 Start Printer Setup Utility.
2 Select the printer in the Printer List dialog box, and click Show Info.
3 Select Installable Options, and select the options that have been installed in the printer, and then click Apply
Changes.
Installing Printer Drivers on Macintosh Computers
103
104
Installing Printer Drivers on Macintosh Computers
12
Installing Printer Drivers on Linux Computers (CUPS)
This section provides information for installing or setting up the printer driver with CUPS (Common UNIX Printing
System) on Red Hat® Enterprise Linux® 5/6 Desktop or SUSE® Linux Enterprise Desktop 10/11.
Operation on Red Hat Enterprise Linux 5/6 Desktop
Setup Overview
Red Hat Enterprise Linux 5/6 Desktop:
1 Install the printer driver.
2 Set up the print queue.
3 Specify the default queue.
4 Specify the printing options.
Installing the Printer Driver
CAUTION: Before you install the printer driver on Red Hat Enterprise Linux 5, confirm that Update 6 or higher is applied to your
operating system. Consult your Linux distributor for the upgrade of your system.
1 Select Applications→ System Tools (Accessories for Red Hat Enterprise Linux 5 Desktop)→ Terminal.
2 Type the following command in the terminal window.
su
(Type the administrator password)
rpm -ivh (Type the file path)/Dell-C3760-ColorLaser-x.x-x.noarch.rpm
The printer driver is installed.
Setting Up the Queue
To execute printing, you must set up the print queue on your workstation.
For Red Hat Enterprise Linux 5 Desktop:
1 Open the URL "http://localhost:631" using a web browser.
2 Click Administration.
3 Click Add Printer.
Type the name of the printer in the Name box in the Add New Printer window, and click Continue.
You can optionally specify the location and description of the printer for further information.
For network connections:
a
Select LPD/LPR Host or Printer from the Device menu, and click Continue.
b
Type the IP address of the printer in Device URI, and click Continue.
Format: lpd://xxx.xxx.xxx.xxx (the IP address of the printer)
Installing Printer Drivers on Linux Computers (CUPS)
105
For USB connections:
a
Select Dell C3760dn Color Laser USB #1, Dell C3760dn Color Laser, Dell C3760n Color Laser USB #1, or
Dell C3760n Color Laser from the Device menu, and click Continue.
4 Select Dell C3760dn Color Laser PS vx.x (en) or Dell C3760n Color Laser PS vx.x (en) from the Model menu,
and click Add Printer.
5 Type root as the user name, type the administrator password, and click OK.
The message Printer xxx has been added successfully. appears.
The setup is complete.
For Red Hat Enterprise Linux 6 Desktop:
1 Open the URL "http://localhost:631" using a web browser.
2 Click Administration.
3 Click Add Printer.
4 Type root as the user name, type the administrator password, and click OK.
For network connections:
a
Select LPD/LPR Host or Printer from the Other Network Printers menu, and click Continue.
b
Type the IP address of the printer in Connection, and click Continue.
Format: lpd://xxx.xxx.xxx.xxx (the IP address of the printer)
For USB connections:
a
Select Dell C3760dn Color Laser or Dell C3760n Color Laser from the Local Printers menu, and click
Continue.
5 Type the name of the printer in the Name box in the Add Printer window, and click Continue.
You can optionally specify the location and description of the printer for further information.
6 Select Dell C3760dn Color Laser PS vx.x (en) or Dell C3760n Color Laser PS vx.x (en) from the Model menu,
and click Add Printer.
The setup is complete.
Printing From the Applications
When you have finished setting up the queue, you can print jobs from the applications. Start the print job from the
application, and specify the queue in the print dialog box.
However, sometimes you can print only from the default queue depending on the application (for example Mozilla).
In these cases, before you start printing, set queue you want to print to as the default queue. For information on
specifying the default queue, see "Setting the Default Queue."
Setting the Default Queue
1 Select Applications→ System Tools (Accessories for Red Hat Enterprise Linux 5 Desktop)→ Terminal.
2 Type the following command in the terminal window.
su
(Type the administrator password)
lpadmin -d (Type the queue name)
106
Installing Printer Drivers on Linux Computers (CUPS)
Specifying the Printing Options
You can specify the printing options such as color mode.
For Red Hat Enterprise Linux 5 Desktop:
1 Open the URL "http://localhost:631" using a web browser.
2 Click Administration.
3 Click Manage Printers.
4 Click Set Printer Options of the printer for which you want to specify the printing options.
5 Specify the required settings, and click Set Printer Options.
6 Type root as the user name, and type the administrator password.
The message Printer xxx has been configured successfully. appears.
The setting is complete.
For Red Hat Enterprise Linux 6 Desktop:
1 Open the URL "http://localhost:631" using a web browser.
2 Click Administration.
3 Click Manage Printers.
4 Click the queue name for which you want to specify the printing options.
5 Select Set Default Options from the Administration menu.
6 Click the desired setting item, specify the required settings, and click Set Default Options.
The message Printer xxx default options have been set successfully. appears.
The setting is complete.
Uninstalling the Printer Driver
1 Select Applications→ System Tools (Accessories for Red Hat Enterprise Linux 5 Desktop)→ Terminal.
2 Type the following command in the terminal window to delete the print queue.
su
(Type the administrator password)
/usr/sbin/lpadmin -x (Type the print queue name)
3 Repeat the command above for all queues for the same model.
4 Type the following command in the terminal window.
su
(Type the administrator password)
rpm -e Dell-C3760-Color-Laser
The printer driver is uninstalled.
Installing Printer Drivers on Linux Computers (CUPS)
107
Operation on SUSE Linux Enterprise Desktop 10
Setup Overview
SUSE Linux Enterprise Desktop 10:
1 Install the printer driver.
2 Set up the print queue.
3 Specify the default queue.
4 Specify the printing options.
Installing the Printer Driver
1 Select Computer→ More Applications... and select Gnome Terminal on the Application Browser.
2 Type the following command in the terminal window.
su
(Type the administrator password)
rpm -ivh (Type the file path)/Dell-C3760-ColorLaser-x.x-x.noarch.rpm
The printer driver is installed.
Setting Up the Queue
To execute printing, you must set up the print queue on your workstation.
1 Select Computer→ More Applications... and select YaST on the Application Browser.
2 Type the administrator password, and click Continue.
YaST Control Center is activated.
3 Select Hardware on YaST Control Center, and select Printer.
The Printer Configuration dialog box appears.
For network connections:
a
Click Add.
b
Select Network Printers as Printer Type, and click Next.
c
Select Print via LPD-Style Network Server as Network Printers, and click Next.
d
Type the IP address of the printer in Hostname of Print Server.
e
Type the name of the printer queue in Remote Queue Name, and click Next.
f
Type the printer name in Name for Printing.
NOTE: Printer Description and Printer Location do not have to be specified.
108
g
Select the Do Local Filtering check box, and click Next.
h
Select DELL as Manufacturer. Select C3760dn Color Laser or C3760n Color Laser as Model, and click Next.
i
Confirm the settings in Configuration, and click OK.
Installing Printer Drivers on Linux Computers (CUPS)
For USB connections:
a
Click Add.
b
Select Directly Connected Printers as Printer Type, and click Next.
c
Select USB Printer as Directly Connected Printers, and click Next.
d
Select //Dell/C3760dn Color Laser or //Dell/C3760n Color Laser as Device, and click Next.
e
Type the printer name in Name for Printing.
NOTE: Printer Description and Printer Location do not have to be specified.
f
Select the Do Local Filtering check box, and click Next.
g
Select DELL as Manufacturer. Select C3760dn Color Laser or C3760n Color Laser as Model, and click Next.
h
Confirm the settings in Configuration, and click OK.
4 Click Finish.
Printing From the Applications
When you have finished setting up the queue you can print jobs from the applications. Start the print job from the
application, and specify the queue in the print dialog box.
However, sometimes you can print only from the default queue depending on the application (for example Mozilla).
In these cases, before you start printing, set queue you want to print to as the default queue. For information on
specifying the default queue, see "Setting the Default Queue."
Setting the Default Queue
1 To activate the Printer setup: Autodetected printers, do the following.
a
Select Computer→ More Applications... and select YaST on the Application Browser.
b
Type the administrator password, and click Continue.
YaST Control Center is activated.
c
Select Hardware on YaST Control Center, and select Printer.
2 Select the printer you want to set to default on the Printer Configuration, and select Set Default in the Other
button menu.
3 Click Finish.
Specifying the Printing Options
You can specify the printing options such as color mode.
1 Open a web browser.
2 Type http://localhost:631/admin in Location, and press <Enter>.
3 Type root as the user name, and type the administrator password.
The CUPS window appears.
NOTE: Set the password for authority as the printer administrator before setting the printer queue. If you have not set it, go to
"Setting the Password for Authority as the Printer Administrator."
4 Click Manage Printers.
5 Specify the required settings, and click Continue.
The message Printer xxx has been configured successfully. appears.
The setting is complete. Execute printing from the application.
Installing Printer Drivers on Linux Computers (CUPS)
109
Setting the Password for Authority as the Printer Administrator
You must set the password for authority as the printer administrator to do operations as the printer administrator.
1 Select Computer→ More Applications... and select Gnome Terminal on the Application Browser.
2 Type the following command in the terminal window.
su
(Type the administrator password)
lppasswd -g sys -a root
(Type the password for authority as the printer administrator after
the Enter password prompt.)
(Retype the password for authority as the printer administrator after
the Enter password again prompt.)
Uninstalling the Printer Driver
1 Select Computer→ More Applications... and select Gnome Terminal on the Application Browser.
2 Type the following command in the terminal window to delete the print queue.
su
(Type the administrator password)
/usr/sbin/lpadmin -x (Type the printer queue name)
3 Repeat the command above for all queues for the same model.
4 Type the following command in the terminal window.
su
(Type the administrator password)
rpm -e Dell-C3760-Color-Laser
The printer driver is uninstalled.
Operation on SUSE Linux Enterprise Desktop 11
Setup Overview
SUSE Linux Enterprise Desktop 11:
1 Install the printer driver.
2 Set up the print queue.
3 Specify the default queue.
4 Specify the printing options.
110
Installing Printer Drivers on Linux Computers (CUPS)
Installing the Printer Driver
1 Select Computer→ More Applications... and select GNOME Terminal on the Application Browser.
2 Type the following command in the terminal window.
su
(Type the administrator password)
rpm -ivh (Type the file path)/Dell-C3760-ColorLaser-x.x-x.noarch.rpm
The printer driver is installed.
Setting Up the Queue
To execute printing, you must set up the print queue on your workstation.
1 Select Computer→ More Applications..., and select YaST on the Application Browser.
2 Type the administrator password, and click Continue.
YaST Control Center is activated.
3 Select Hardware on YaST Control Center, and select Printer.
The Printer Configurations dialog box opens.
For network connections:
a
Click Add.
The Add New Printer Configuration dialog box opens.
b
Click Connection Wizard.
The Connection Wizard dialog box opens.
c
Select Line Printer Daemon (LPD) Protocol from Access Network Printer or Printserver Box via.
d
Type the IP address of the printer in IP Address or Host Name:.
e
Select Dell in the Select the printer manufacturer: drop-down menu.
f
Click OK.
The Add New Printer Configuration dialog box appears.
g
Select Dell C3760dn Color Laser PS vx.x [Dell/Dell_C3760dn_Color_Laser.ppd.gz] or Dell C3760n Color
Laser PS vx.x [Dell/Dell_C3760n_Color_Laser.ppd.gz] from the Assign Driver list.
NOTE: You can specify the printer name in Set Name:.
h
Confirm the settings, and click OK.
For USB connections:
a
Click Add.
The Add New Printer Configuration dialog box opens.
The printer name is displayed in the Determine Connection list.
b
Select Dell C3760dn Color Laser PS vx.x [Dell/Dell_C3760dn_Color_Laser.ppd.gz] or Dell C3760n Color
Laser PS vx.x [Dell/Dell_C3760n_Color_Laser.ppd.gz] from the Assign Driver list.
NOTE: You can specify the printer name in Set Name:.
c
Confirm the settings, and click OK.
Installing Printer Drivers on Linux Computers (CUPS)
111
Printing From the Applications
When you have finished setting up the queue you can print jobs from the applications. Start the print job from the
application, and specify the queue in the print dialog box.
However, sometimes you can print only from the default queue depending on the application (for example Mozilla).
In these cases, before you start printing, set queue you want to print to as the default queue. For information on
specifying the default queue, see "Setting the Default Queue."
Setting the Default Queue
You can set the default queue when you add the printer.
1 Select Computer→ More Applications..., and select YaST on the Application Browser.
2 Type the administrator password, and click Continue.
YaST Control Center is activated.
3 Select Hardware on YaST Control Center, and select Printer.
The Printer Configurations dialog box opens.
4 Click Edit.
A dialog box to modify the specified queue opens.
5 Confirm that the printer you want to set is selected in the Connection list.
6 Select the Default Printer check box.
7 Confirm the settings, and click OK.
Specifying the Printing Options
You can specify the printing options such as color mode.
1 Open a web browser.
2 Type http://localhost:631/admin in Location, and press <Enter>.
3 Click Manage Printers.
4 Click Set Printer Options of the printer for which you want to specify the printing options.
5 Specify the required settings, and click Set Printer Options.
6 Type root as the user name, type the administrator password, and click OK.
NOTE: Set the password for authority as the printer administrator before setting the printer queue. If you have not set it, go to
"Setting the Password for Authority as the Printer Administrator."
The message Printer xxx has been configured successfully. appears.
The setting is complete. Execute printing from the application.
112
Installing Printer Drivers on Linux Computers (CUPS)
Setting the Password for Authority as the Printer Administrator
You must set the password for authority as the printer administrator to do operations as the printer administrator.
1 Select Computer→ More Applications... and select GNOME Terminal on the Application Browser.
2 Type the following command in the terminal window.
su
(Type the administrator password)
lppasswd -g sys -a root
(Type the password for authority as the printer administrator after
the Enter password prompt.)
(Retype the password for authority as the printer administrator after
the Enter password again prompt.)
Uninstalling the Printer Driver
1 Select Computer→ More Applications... and select GNOME Terminal on the Application Browser.
2 Type the following command in the terminal window to delete the print queue.
su
(Type the administrator password)
/usr/sbin/lpadmin -x (Type the printer queue name)
3 Repeat the command above for all queues for the same model.
4 Type the following command in the terminal window.
su
(Type the administrator password)
rpm -e Dell-C3760-Color-Laser
The printer driver is uninstalled.
Installing Printer Drivers on Linux Computers (CUPS)
113
114
Installing Printer Drivers on Linux Computers (CUPS)
Using Your Printer
13 Operator Panel .......................................................................... 117
14 Dell™ Printer Configuration Web Tool................................... 121
15 Understanding the Tool Box Menus....................................... 171
16 Understanding the Printer Menus.......................................... 187
17 Print Media Guidelines............................................................. 229
18 Loading Print Media ................................................................. 235
115
116
13
Operator Panel
About the Operator Panel
The operator panel has a 4-line LCD panel, a status LED, control buttons, and a number pad, which allows you to
control the printer.
1
2
10
4
9
8
3
4
3
5
6
7
1 Status LED (Ready / Error)
•
Shows a green light when the printer is ready and a blinking green light when data is being received.
•
Shows an amber light when an error occurs and a blinking amber light when an unrecoverable print error
occurs.
2 LCD Panel
•
3
Displays various settings, instructions, and error messages.
button
•
4
Moves the cursor or highlight up or down.
button
•
5
Moves the cursor or highlight right or left.
(Cancel) button
•
Cancels active or pending jobs.
6 Number Pad
•
7
Enters numbers and characters.
(Power Saver) button
•
Enters or exits the Power Saver mode. When the machine is not used for a while, it enters the Power Saver
mode to reduce power consumption. When the Power Saver mode is active, the Power Saver button blinks.
Operator Panel
117
8
(Back) button
•
9
Returns to the previous screen.
(Menu) button
•
10
Moves to the top level of the menu.
(Set) button
•
Confirms the entry of values.
NOTE: Moving to a different menu or returning to a previous screen cancels the current entry or setting. Make sure to press the
(Set) button to save the current entry or setting.
Using the Number Pad
As you perform various tasks, you may need to enter characters and numbers. For example, when you enter the
password or when you setup wireless network.
Number Pad Letters and Numbers
Key
Assigned numbers, letters or characters
1
1 @ . _ - (space) \ & ( ) ! " # $ % ' ~ ^ | ` ; : ? , + * / = [ ] { } < >
2
abcABC2
3
defDEF3
4
ghiGHI4
5
jklJKL5
6
mnoMNO6
7
pqrsPQRS7
8
tuvTUV8
9
wxyzWXYZ9
0
0
∗
@._-
#
(space) \ & ( )
Changing Numbers or Names
If you make a mistake while entering a number, press the
Then enter the correct number or character.
118
Operator Panel
(Cancel) button to delete the last digit or character.
Printing a Panel Settings Report
The panel settings report shows current settings for the printer menus. For details about how to print a panel settings
report, see "Report / List."
Changing the Language
To change the language used on the LCD panel:
When Using the Operator Panel
1 Press the
(Menu) button.
2 Press the
button until Panel Language is highlighted, and then press the
(Set) button.
3 Press the
button until the desired language is highlighted, and then press the
(Set) button.
When Using the Tool Box
1 Click Start→ All Programs→ Dell Printers→ Dell C3760 Color Laser Printer→ Tool Box.
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Panel Language from the list at the left side of the page.
The Panel Language page appears.
4 Select the desired language from Panel Language, and then click Apply New Settings.
Setting the Power Saver Timer Option
You can set the power saver timer for the printer. The printer enters the power saver mode when the printer is not
used for a certain period of time. If the Auto-Off Timer is set to On, the printer automatically turns off after a
specified period of time passes in deep sleep mode.
NOTE: If the Panel Lock Control is set to Enable, you need to enter the four digit password to enter the Admin
Settings menu.
NOTE: Auto-Off Timer feature is available only in certain regions.
To set the power saver timer:
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until System Settings is highlighted, and then press the
4 Ensure that Power Saver Timer is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
5 Press the
button until the desired setting is highlighted, and then press the
6 Press the
button.
or
(Set) button.
button or enter the desired value using the number pad, and then press the
(Set)
You can specify from 1 to 60 minutes for Sleep or 1 to 60 minutes for Deep Sleep.
You can specify from 60 to 1440 minutes for Auto-Off Timer, if you set Auto-Off Timer to On.
To return to the top menu, press the
(Menu) button.
Operator Panel
119
120
Operator Panel
Dell™ Printer Configuration Web Tool
14
Overview
NOTE: This web tool is available only when the printer is connected to a network using an Ethernet cable or the wireless printer
adapter.
NOTE: The images used in this manual are those of the Dell C3760dn Color Laser Printer unless otherwise mentioned.
One of the features of the Dell Printer Configuration Web Tool is E-Mail Alert Setup, which sends e-mail to you or
the key operator when the printer needs supplies or intervention.
To fill out printer inventory reports requiring the asset tag number of all the printers in your area, use the Printer
Information feature in the Dell Printer Configuration Web Tool. Enter the IP address of each printer on the
network to display the asset tag number.
The Dell Printer Configuration Web Tool feature also allows you to change the printer settings and keep track of
printing trends. If you are a network administrator, you can copy the printer settings to one or all printers on the
network using your web browser.
Dell™ Printer Configuration Web Tool
121
Setting Up the Dell Printer Configuration Web Tool
Ensure that you activate JavaScript in your browser before using the Dell Printer Configuration Web Tool.
Follow the procedures below to configure both the environment settings of your web browser and the EWS setting
on the operator panel before using the Dell Printer Configuration Web Tool.
NOTE: The Dell Printer Configuration Web Tool pages may be displayed unreadable if the pages were configured by the
language different from the language of your web browser.
Setting Up From Web Browser
For Internet Explorer®
Setting Up the Display Language
1 Select Internet Options from Tools on the menu bar.
2 Select Languages in the General tab.
3 Specify the display language in order of preference in the Language list.
For example:
•
Italian (Italy) [it-IT]
•
Spanish (Traditional Sort) [es-ES tradnl]
•
German (Germany) [de-DE]
•
French (France) [fr-FR]
•
English (United States) [en-US]
•
Danish [da-DK]
•
Dutch (Netherlands) [nl-NL]
•
Norwegian (Bokmal) [no]
•
Swedish [sv-SE]
Setting the IP Address of the Printer to Non-Proxy
1 Select Internet Options from the Tools menu.
2 Click LAN Settings under Local Area Network (LAN) Settings in the Connections tab.
3 Do either of the following:
•
Clear the Use a proxy server for your LAN check box under Proxy server.
•
Click Advanced, and then specify the IP address of the printer in the Do not use proxy server for addresses
beginning with field under Exceptions.
For Firefox 2.0 or Later
Setting Up the Display Language
1 Select Options from the Tools menu.
2 Click Advanced.
3 If you are using Firefox 2.0, click Choose in the General tab. If you are using Firefox 3.0, click Choose in the
Content tab.
122
Dell™ Printer Configuration Web Tool
4 Specify the display language in order of preference in the Languages in order of preference list menu.
For example:
•
English [en] or English/United States [en-us]
•
Italian [it]
•
Spanish [es]
•
German [de]
•
French [fr]
•
Dutch [nl]
•
Norwegian [no]
•
Swedish [sv]
•
Danish [da]
Setting the IP Address of the Printer to Non-Proxy
1 Select Options from the Tools menu.
2 Click Advanced tab.
3 Click Network on the Options dialog box.
4 Click Connection → Settings.
5 If you are using Firefox 2.0, do one of the following:
•
Select the Direct connection to the Internet check box.
•
Select the Auto-detect proxy settings for this network check box.
•
Select the Manual proxy configuration check box, and then enter the IP address of the printer in the No Proxy
for edit box.
•
Select the Automatic proxy configuration URL check box.
If you are using Firefox 3.0, do one of the following:
•
Select the No Proxy check box, if you do not want to use a proxy.
•
Select the Auto-detect proxy settings for this network check box.
•
Select the Manual proxy configuration check box, and then enter a hostname and a port number if you have a
list of one or more proxy servers. If you have an IP address that does not use a proxy, enter the IP address of the
printer in the No Proxy for edit box.
•
Select the Automatic proxy configuration URL check box.
Setting Up From Operator Panel
You can launch the Dell Printer Configuration Web Tool only when EWS is set to Enable (the factory default) on
the operator panel. Confirm the operator panel setting if you cannot launch the Dell Printer Configuration Web
Tool. For more information, see "Understanding the Printer Menus."
Dell™ Printer Configuration Web Tool
123
Starting the Dell Printer Configuration Web Tool
To launch the Dell Printer Configuration Web Tool, enter the IP address of your printer in your web browser.
If you do not know the IP address of your printer, print the printer settings report or display the TCP/IP Settings
page, which lists the IP address. For details about how to find your printer's IP address, see "Verifying the IP
Settings."
Overview of the Menu Items
The Dell Printer Configuration Web Tool consists of the following menus:
•
Printer Status
•
Printer Jobs
•
Printer Settings
•
Print Server Settings
•
Copy Printer Settings
•
Print Volume
•
Printer Information
•
Tray Settings
•
E-Mail Alert
•
Set Password
•
Online Help
•
Order Supplies at:
•
Contact Dell Support at:
Printer Status
Use the Printer Status menu to get immediate feedback on the printer supply status. When a toner cartridge is
running low, click the order supplies link on the first screen to order a new toner cartridge.
Printer Jobs
Use the Printer Jobs menu to contain information on the Job List page and Completed Jobs page.
These pages show the details of the status regarding each print job.
Printer Settings
Use the Printer Settings menu to change the printer settings and to view the settings in the operator panel remotely.
Print Server Settings
Use the Print Server Settings menu to change the type of printer interface and the necessary conditions for
communications.
124
Dell™ Printer Configuration Web Tool
Copy Printer Settings
Use the Copy Printer Settings menu to copy the printer settings to another printer or printers on the network by
typing the IP address of each printer.
NOTE: You must log in as an administrator to use this feature.
Print Volume
Use the Print Volume menu to check the history of printing, such as paper usage, the types of jobs being printed,
limit to which users can use the color mode, and the maximum number of pages they can print.
Printer Information
Use the Printer Information menu to get information on service calls, inventory reports, or the status of current
memory and engine code levels.
Tray Settings
Use the Tray Settings menu to get information about the paper type and size for each tray.
E-Mail Alert
Use the E-Mail Alert menu to receive e-mail when the printer needs supplies or intervention. To be notified, type
your name or the name of the key operator in the e-mail list box.
Set Password
Use the Set Password menu to lock the Dell Printer Configuration Web Tool with a password so that other users do
not inadvertently change the printer settings that you have selected.
NOTE: You must log in as an administrator to use this feature.
Online Help
Click Online Help to visit the Dell Support website.
Order Supplies at:
www.dell.com/supplies
Contact Dell Support at:
support.dell.com
Dell™ Printer Configuration Web Tool
125
Page Display Format
The layout of the page is divided into three sections listed below:
•
Top Frame
•
Left Frame
•
Right Frame
Top Frame
The top frame is located at the top of all pages. When the Dell Printer Configuration Web Tool is activated, the
current status and specifications of the printer are displayed in the top frame on every page.
The following items are displayed in the top frame.
1
2 3 4
1
Dell C3760dn Color
Laser
Displays the product name of the printer.
2
IPv4
Displays the IP address of the printer.
5
6
IPv6
3
Location
Displays location of the printer. The location can be changed in the Basic Information section on
the Print Server Settings page.
4
Contact Person
Displays the name of the printer administrator. The name can be changed in the Basic
Information section on the Print Server Settings page.
5
Event Panel
Displays the indicator for the condition of the printer.
6
Machine image
Shows the bitmap image of the printer. The Printer Status menu appears in the right frame when
you click on the image.
126
Dell™ Printer Configuration Web Tool
Left Frame
The left frame is located on the left side of all the pages. The menu titles displayed in the left frame are linked to
corresponding menus and pages. You can go to the corresponding page by clicking their characters.
The following menus are displayed in the left frame.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
Printer Status
Links to the Printer Status menu.
2
Printer Jobs
Links to the Printer Jobs menu.
3
Printer Settings
Links to the Printer Settings Report menu.
4
Print Server Settings
Links to the Print Server Reports menu.
5
Copy Printer Settings
Links to the Copy Printer Settings menu.
6
Print Volume
Links to the Print Volume menu.
7
Printer Information
Links to the Printer Status menu.
8
Tray Settings
Links to the Tray Settings menu.
9
E-Mail Alert
Links to the Print Server Settings menu.
10
Set Password
Links to the Security menu.
11
Online Help
Links to the Dell Support website.
12
Order Supplies at:
Links to the Dell web page.
13
Contact Dell Support at:
Links to the Dell support page web address: http://support.dell.com
Dell™ Printer Configuration Web Tool
127
Right Frame
The right frame is located on the right side of all the pages. The contents of the right frame correspond to the menu
that you select in the left frame. For details on the items displayed in the right frame, see "Details of the Menu
Items."
Buttons in the Right Frame
1
2
3
1
Refresh Button
Receives the current printer configuration and updates the latest information in the right frame.
2
Apply New Settings
Button
Submits new settings made on the Dell Printer Configuration Web Tool to the printer. The new
settings replace the old settings of the printer.
3
Restore Settings Button Restores the old settings that existed before any changes were made. New settings will not be
submitted to the printer.
Changing the Settings of the Menu Items
Some menus allow you to change the printer settings through the Dell Printer Configuration Web Tool. When you
access these menus, the authentication window appears on the screen. Type a user name and password for the
printer administrator by following the prompts displayed in the dialog box.
The default user name is admin, and the default password is left blank (NULL). You can change only the password in
the Set Password page in the Security menu. The user name cannot be changed. See "Set Password" for more
information.
Details of the Menu Items
"Printer Status"
"Printer Status"
"Printer Status"
"Printer Events"
"Printer Information"
"Printer Jobs"
"Printer Jobs"
"Job List"
"Completed Jobs"
128
Dell™ Printer Configuration Web Tool
"Printer Settings"
"Printer Settings Report"
"Menu Settings"
"Reports"
"Printer Settings"
"System Settings"
"Network Settings"
"USB Settings"
"PCL Settings"
"PostScript Settings"
"PDF Settings"
"Secure Settings"
"USB Direct Print Defaults"
"Printer Maintenance"
"Paper Density"
"Adjust Transfer Belt Unit"
"Adjust 2nd BTR"
"Adjust Fusing Unit"
"Auto Registration Adjustment"
"Color Registration Adjustments"
"Reset Defaults"
"Initialize PrintMeter"
"Storage"*1
"Non-Dell Toner"
"Adjust Altitude"
"Clock Settings"
"Web Link Customization"
"Print Server Settings"
"Print Server Reports"
"Print Server Setup Page"
"E-Mail Alert Setup Page"
"Print Server Settings"
"Basic Information"
"Port Settings"
"TCP/IP"
"SMB"
"E-Mail Alert"
"Bonjour (mDNS)"
"SNMP"
"SNTP"
"Wireless LAN"*2
"AirPrint"
"Google Cloud Print"
"Proxy Server"
"Reset Print Server"
Dell™ Printer Configuration Web Tool
129
"Print Server Settings"
"Security"
"Set Password"
"Authentication System"
"Kerberos Server"
"LDAP Server"
"LDAP Authentication"
"SSL/TLS"
"IPsec"
"802.1x"*3
"IP Filter (IPv4)"
"Copy Printer Settings"
"Copy Printer Settings"
"Copy Printer Settings"
"Print Volume"
"Print Volume"
"Print Volume"
"Copy Printer Settings Report"
"Dell ColorTrack"
"Tray Settings"
"Tray Settings"
*1
This item is available only when RAM Disk is enabled with the optional 512MB memory module installed or the optional hard disk is
installed.
*2
This item is available only when the printer is connected using the wireless network.
*3
This item is available only when the printer is connected using an Ethernet cable.
Printer Status
Use the Printer Status menu to check the status of consumables, hardware, and specifications of the printer.
The following pages are displayed in the Printer Status menu.
Printer Status
Purpose:
To check the status of the consumables, trays, and covers.
Values:
Cyan Toner Cartridge
OK
Indicates that there is enough amount of toner for use.
Magenta Toner Cartridge
Replace Soon
Indicates that the toner needs to be replaced soon.
Yellow Toner Cartridge
Replace Now
Indicates that the toner needs to be replaced now.
OK
Indicates that the status of the drum cartridge and/or waste toner
box is OK for use.
Replace Soon
Indicates that the drum cartridge and/or waste toner box needs to be
replaced soon.
Replace Now
Indicates that the drum cartridge and/or waste toner box needs to be
replaced now.
OK
Indicates that there is some paper in the tray but the quantity is
unknown.
Add Paper
Indicates that there is no paper in the tray.
Black Toner Cartridge
Consumables
Paper Trays
130
Status
Status
Capacity
Displays the maximum capacity of the paper tray.
Size
Displays the size of paper in the tray.
Dell™ Printer Configuration Web Tool
Output Tray
Status
OK
Indicates that the tray is available.
Full
Indicates that the tray is not available.
Capacity
Cover
Status
Displays the maximum capacity of the paper tray.
Closed
Indicates that the cover is closed.
Open
Indicates that the cover is open.
Printer Type
Displays the type of the printer. Color Laser is displayed normally.
Printing Speed
Displays the printing speed.
Printer Events
Purpose:
When faults occur, such as Out of Paper or Cover is open, the details of all alerts or indications of faults are displayed
in the Printer Events page.
Values:
Location
Displays the location where a fault occurred.
Details
Displays the details of the fault.
Printer Information
Purpose:
To verify the printer details such as the hardware configuration and software version. This page can also be displayed
by clicking on the Printer Information tab in the left frame.
Values:
Dell Service Tag Number
Displays Dell service tag number.
Express Service Code
Displays Dell express service code.
Asset Tag Number
Displays the asset tag number of the printer.
Printer Serial Number
Displays the serial number of the printer.
Memory Capacity
Displays the memory capacity.
Hard Disk*1
Displays information on the printer's hard disk.
Processor Speed
Displays the processing speed.
Printer Revision Levels
Firmware Version
Displays the revision date (revision level).
Network Firmware Version
Displays the revision date (revision level).
*1 This item is available only when the optional hard disk drive is installed.
Printer Jobs
The Printer Jobs menu contains information on the Job List and Completed Jobs pages. These pages show the
details of the status regarding each print job.
Job List
Purpose:
To confirm the jobs that are being processed. Click the Refresh button to update the screen.
Values:
ID
Displays the job ID.
Dell™ Printer Configuration Web Tool
131
Job Name
Displays the file name of the job being processed.
Owner
Displays the name of the job owner.
Host Name
Displays the name of the host computer.
Job Status
Displays the status of the job being processed.
Host I/F
Displays the status of the host interface.
Job Submitted Time
Displays the date when the job was submitted.
Completed Jobs
Purpose:
To check the completed jobs. Up to the last 20 jobs are displayed. Click the Refresh button to update the screen.
Values:
ID
Displays the job ID.
Job Name
Displays the file name of the completed job.
Owner
Displays the name of the job owner.
Host Name
Displays the name of the host computer.
Output Result
Displays the status of the completed job.
Impression Number
Displays the total number of pages for the job.
No. of Sheets
Displays the total number of sheets for the job.
Host I/F
Displays the status of the host interface.
Job Submitted Time
Displays the date when the job was submitted.
Printer Settings
Use the Printer Settings menu to display the Printer Settings Report, Printer Settings, and Printer Maintenance
tabs and to configure the printer settings.
The following tabbed pages are displayed at the top of the right frame.
Printer Settings Report
The Printer Settings Report tab includes the Menu Settings and Reports pages.
Menu Settings
Purpose:
To display the current settings of the printer menus.
Values:
System Settings
132
Power Saver Time - Sleep
Displays the time taken by the printer to enter Sleep mode after it
finishes a job.
Power Saver Time - Deep
Sleep
Displays the time taken by the printer to enter Deep Sleep mode after
it has entered Sleep mode.
Power Saver Time - AutoOff Timer*1
Displays the time taken by the printer to be turned off after it has
entered Deep Sleep mode.
mm / inch
Displays the measurement unit that is used on the LCD panel.
Control Panel Tone
Displays the volume of the tone that is emitted when the operator
panel input is correct. Off indicates that the tone is disabled.
Dell™ Printer Configuration Web Tool
Invalid Key Tone
Displays the volume of the tone that is emitted when the operator
panel input is incorrect. Off indicates that the tone is disabled.
Machine Ready Tone
Displays the volume of the tone that is emitted when the printer
becomes ready. Off indicates that the tone is disabled.
Job Completed Tone
Displays the volume of the tone that is emitted when a print job is
complete. Off indicates that the tone is disabled.
Fault Tone
Displays the volume of the tone that is emitted when a job ends
abnormally. Off indicates that the tone is disabled.
Alert Tone
Displays the volume of the tone that is emitted when a problem occurs.
Off indicates that the tone is disabled.
Out of Paper Tone
Displays the volume of the tone that is emitted when the printer runs
out of paper. Off indicates that the tone is disabled.
Low Toner Alert Tone
Displays the volume of the tone that is emitted when the toner is low.
Off indicates that the tone is disabled.
Auto Clear Alert Tone
Displays the volume of the tone that is emitted 5 seconds before the
printer performs auto clear. Off indicates that the tone is disabled.
All Tones
Displays the volume of all the alert tones. Off indicates that all the
tones are disabled.
Low Toner Alert Message
Displays whether to show the alert message when the toner is low.
Auto Log Print
Displays whether to automatically print a job history report after every
20 jobs.
RAM Disk*2
Displays whether to allocate RAM for the file system for the Secure
Print, Proof Print, Private Mail Box Print, and Public Mail Box Print
features.
Panel Language
Displays the language used on the LCD panel.
Auto Reset
Displays the amount of time before the printer automatically resets its
settings to the defaults when no additional settings are made.
Fault Time-out
Displays the amount of time the printer waits before canceling a job
that stops abnormally.
Job Time-out
Displays the amount of time the printer waits for data to arrive from
the computer.
Default Paper Size
Displays the default print paper size.
Print ID
Displays where to print a user ID on the output paper.
Print Text
Displays whether the printer outputs PDL (Page Description
Language) data (which is not supported by the printer) as text when
the printer receives it.
Banner Sheet Insert
Position
Displays where to insert a banner sheet in the output paper.
Banner Sheet Specify Tray Displays the tray to feed a banner sheet.
Substitute Tray
Displays if paper of another size has to be used when the paper that is
loaded in the specified tray does not match the paper size setting for
the current job.
Letterhead 2 Sided*3
Displays whether to print both sides on letterhead.
A4<>Letter Switch
Displays whether to print A4 size jobs on Letter size paper if A4 is not
available in the paper trays and vice versa (Letter size job on A4 size
paper).
Report 2 Sided Print*3
Displays whether to print reports on both sides a sheet of paper.
Dell™ Printer Configuration Web Tool
133
Use Another Tray
Displays whether to show a message to select another tray when the
specified paper is not available in the paper tray.
Network Settings
Adobe Protocol
Displays PostScript communication protocol for each interface.
USB Settings
USB Port
Displays whether to enable the USB interface.
Adobe Protocol
Displays PostScript communication protocol for each interface.
Paper Tray
Displays the paper input tray.
Paper Size
Displays the paper size setting.
Custom Paper Size - Y
Displays the length of custom size paper.
Custom Paper Size - X
Displays the width of custom size paper.
PCL Settings
Orientation
2 Sided Print
PostScript Settings
PDF Settings
Displays whether to print on both sides of a sheet of paper.
Font
Displays the selected font from the list of registered fonts.
Symbol Set
Displays a symbol set for the specified font.
Font Size
Displays the font size for scalable typographic fonts.
Font Pitch
Displays the font pitch for scalable mono spaced fonts.
Form Line
Displays the number of lines in a page.
Quantity
Displays the number of copies to print.
Image Enhance
Displays whether to enable the Image Enhancement feature.
Hex Dump
Displays whether to enable the Hex Dump feature.
Draft Mode
Displays whether to print in the draft mode.
Line Termination
Displays whether to set the line termination.
Default Color
Displays the color mode setting.
Ignore Form Feed
Displays whether to ignore blank pages that only contain Form Feed
control codes.
PS Error Report
Displays whether the printer outputs error contents for a PostScript
error.
PS Job Time-out
Displays the execution time for one PostScript job.
Paper Select Mode
Displays the tray that is selected in the PostScript printing.
Default Color
Displays the color mode setting.
Quantity
Displays the number of copies to print.
2 Sided Print
Secure Settings
Displays how text and graphics are oriented on the page.
*3
*3
Displays whether to print on both sides of a sheet of paper.
Print Mode
Displays the print mode setting.
Collation
Displays whether to sort a job.
Output Size
Displays the output paper size.
Layout
Displays the output layout.
Default Color
Displays the color mode setting.
Panel Lock Control
Displays whether to lock Admin Settings with a password.
USB Direct Print
Displays whether to lock the USB Direct Print function with a password.
Software Download
Displays whether to enable download of firmware updates.
Encryption
Hard Disk Over Write
Login Error
134
Dell™ Printer Configuration Web Tool
Displays whether to encrypt the data.
*4
Displays whether to overwrite the hard disk drive.
Displays how many times an administrator can attempt to log in to
Panel Lock and Function Enabled.
Expiration Mode*5
Displays whether to set the date to delete the files stored as Secure
Print in the optional 512MB memory module or the optional hard disk
drive.
Expiration Time*5
Displays the time to delete the files stored as Secure Print in the
optional 512MB memory module or the optional hard disk drive.
Recurrence*5
Displays the period to repeat the setting.
Weekly Settings
Secure Settings - Print
USB Direct Print
Defaults
*5
Displays the day of the month to repeat the setting.
Set Available Time
Displays whether to set the available time period for the Print function.
Start Time
Displays the start time of the available time period for the Print
function.
End Time
Displays the end time of the available time period for the Print
function.
Recurrence
Displays the day of the week to repeat the setting.
Output Color
Displays whether to print in color or in black and white.
Select Tray
Displays the default input tray.
*3
Paper Density
2 Sided Printing
Displays whether to print on both sides of a sheet of paper.
Multiple-Up
Displays whether to print two or more pages on one side of a sheet of
paper.
Collation*4
Displays whether to sort a job.
Plain
Displays the paper density of plain paper.
Label
Displays the paper density of labels.
Adjust Transfer Belt Unit K Offset
Adjust 2nd BTR
Displays the day of the week to repeat the setting.
Monthly Settings*5
Displays the value for black ghost image.
YMC Offset
Displays the value for color ghost image.
Plain
Displays the voltage setting of the transfer roller (-5 to 10) for plain
paper.
Plain Thick*6
Displays the voltage setting of the transfer roller (-5 to 10) for thick
plain paper.
Covers (106-163g/m2)
Displays the voltage setting of the transfer roller (-5 to 10) for cover
paper.
Covers Thick*6
(164-216g/m2)
Displays the voltage setting of the transfer roller (-5 to 10) for thick
cover paper.
Coated (106-163g/m2)
Displays the voltage setting of the transfer roller (-5 to 10) for coated
paper.
Coated Thick*6
(164-216g/m2)
Displays the voltage setting of the transfer roller (-5 to 10) for thick
coated paper.
Label
Displays the voltage setting of the transfer roller (-5 to 10) for labels.
Envelope
Displays the voltage setting of the transfer roller (-5 to 10) for
envelopes.
Recycled
Displays the voltage setting of the transfer roller (-5 to 10) for recycled
paper.
Dell™ Printer Configuration Web Tool
135
Adjust Fusing Unit
Plain
Displays the temperature setting of the fusing unit (-3 to 3) for plain
paper.
Plain Thick*6
Displays the temperature setting of the fusing unit (-3 to 3) for thick
plain paper.
Covers (106-163g/m2)
Displays the temperature setting of the fusing unit (-3 to 3) for cover
paper.
Covers Thick*6
(164-216g/m2)
Displays the temperature setting of the fusing unit (-3 to 3) for thick
cover paper.
Coated (106-163g/m2)
Displays the temperature setting of the fusing unit (-3 to 3) for coated
paper.
Coated Thick*6
(164-216g/m2)
Displays the temperature setting of the fusing unit (-3 to 3) for thick
coated paper.
Label
Displays the temperature setting of the fusing unit (-3 to 3) for labels.
Envelope
Displays the temperature setting of the fusing unit (-3 to 3) for
envelopes.
Recycled
Displays the temperature setting of the fusing unit (-3 to 3) for recycled
paper.
Auto Registration Adjustment
Displays whether to automatically perform color registration
adjustment.
Adjust Altitude
Displays the altitude of the location where the printer is installed.
Non-Dell Toner
Displays whether to use toner cartridge of another manufacturer.
Clock Settings
Date Format
Displays the default date format.
Time Format
Displays the default time format; 24H or 12H.
Time Zone
Displays the default time zone.
Set Date
Displays the date setting.
Set Time
Displays the time setting.
Web Link Customization Select Reorder URL
Dell ColorTrack
Displays a link used for ordering consumables, which can be accessed
from Order Supplies at: in the left frame.
Regular
Displays the regular URL (http://accessories.us.dell.com/sna) that can
be linked to Order Supplies at:.
Premier
Displays the premier URL (http://premier.dell.com) that can be linked
to Order Supplies at:.
ColorTrack Mode
Displays whether to enable the ColorTrack.
Non Registered User
Displays whether to permit the printing of data without authentication
information.
Auto Color To Mono Print Displays whether to print all print jobs in black and white even when
color print is specified.
ColorTrack Error Report
136
Dell™ Printer Configuration Web Tool
Displays whether to print the error report on the ColorTrack mode.
Tray Settings
MPF Mode
Displays whether to use the printer driver settings for the size and type
of paper loaded in the multipurpose feeder (MPF).
MPF Paper Size*7
Displays the paper size setting of the MPF.
*7
Displays the paper type setting of the MPF.
MPF Paper Type
MPF Custom Paper Size - Displays the length of custom size paper loaded in the MPF.
Y*7
MPF Custom Paper Size - Displays the width of custom size paper loaded in the MPF.
X*7
MPF Display Popup*7
Displays whether to show a popup menu that prompts the user to set
the paper size and type when the paper is loaded in the MPF.
Tray 1 Paper Size
Displays the paper size setting of tray1.
Tray 1 Paper Type
Displays the paper type setting of tray1.
Tray 1 Custom Paper Size - Displays the length of custom size paper loaded in tray1.
Y
Tray 1 Custom Paper Size - Displays the width of custom size paper loaded in tray1.
X
Tray 1 Display Popup
Displays whether to show a popup menu that prompts the user to set
the paper size and type when the paper is loaded in tray1.
Tray 2 Paper Size*8
Displays the paper size setting of the optional 550-sheet feeder (tray2).
*8
Tray 2 Paper Type
Displays the paper type setting of the optional 550-sheet feeder.
Tray 2 Custom Paper Size - Displays the length of custom size paper loaded in the optional 550sheet feeder.
Y*8
Tray 2 Custom Paper Size - Displays the width of custom size paper loaded in the optional 550sheet feeder.
X*8
Tray 2 Display Popup*8
Displays whether to show a popup menu that prompts the user to set
the paper size and type when the paper is loaded in the optional 550sheet feeder.
1st Priority
Displays the paper source to be used as the first priority.
2nd Priority
3rd Priority
*8
Displays the paper source to be used as the second priority.
Displays the paper source to be used as the third priority.
*1
Auto-Off Timer feature is available only in certain regions.
*2
This item is available only when the optional 512MB memory module is installed and the optional hard disk is not installed.
*3
This item is available only for Dell C3760dn Color Laser Printer.
*4
This item is available only when the optional hard disk is installed.
*5
This item is available only when RAM Disk is enabled or the optional hard disk is installed.
*6
For paper weight specifications, see "Paper Type Specifications."
*7
This item is available only when Panel Specified in MPF Mode is selected.
*8
This item is available only when the optional 550-sheet feeder is installed.
Reports
Purpose:
To print various types of reports and lists.
Values:
Printer Settings
Click Start to print the Printer Settings page.
Panel Settings
Click Start to print the Panel Settings page.
Dell™ Printer Configuration Web Tool
137
PCL Fonts List
Click Start to print the PCL (Hewlett-Packard Printer Control Language) Fonts List.
PCL Macros List
Click Start to print the PCL Macro List.
PS Fonts List
Click Start to print the PS Fonts List.
PDF Fonts List
Click Start to print the PDF Fonts List.
Job History
Click Start to print the Job History report.
Error History
Click Start to print the Error History report.
Print Meter
Click Start to print the Print Meter report.
Color Test Page
Click Start to print the Color Test Page.
*1
Stored Documents
*1
Click Start to print the Stored Documents list.
This item is available only when RAM Disk is enabled with the optional 512MB memory module installed or the optional hard disk is
installed.
Printer Settings
The Printer Settings tab includes System Settings, Network Settings, USB Settings, PCL Settings, PostScript
Settings, PDF Settings, Secure Settings, and USB Direct Print Defaults pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Time - Sleep
Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Power Saver Time - Deep Sleep
Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
Power Saver Time - Auto-Off Timer*1
Sets the time taken by the printer to be turned off after it has entered Deep
Sleep mode.
mm / inch
Sets the measurement unit to be used on the LCD panel as either mm or
inches.
Control Panel Tone
Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Invalid Key Tone
Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Machine Ready Tone
Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Job Completed Tone
Sets the volume of the tone that is emitted when a print job is complete, or
disables the tone.
Fault Tone
Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.
Alert Tone
Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.
Out of Paper Tone
Sets the volume of the tone that is emitted when the printer runs out of
paper, or disables the tone.
Low Toner Alert Tone
Sets the volume of the tone that is emitted when the toner is low, or
disables the tone.
Auto Clear Alert Tone
Sets the volume of the tone that is emitted 5 seconds before the printer
performs auto clear, or disables the tone.
138
Dell™ Printer Configuration Web Tool
All Tones
Sets the volume of all the alert tones, or disables all the tones.
Low Toner Alert Message
Alerts you if the toner is low.
Auto Log Print
Sets if a job history needs to be printed after every 20 jobs.
RAM Disk*2
Sets whether to allocate RAM for the file system for the Secure Print, Proof
Print, Private Mail Box Print, and Public Mail Box Print features.
Panel Language
Used to set the language on the LCD panel.
Auto Reset
Sets the amount of time before the printer automatically resets its settings
to the defaults when no additional settings are made.
Fault Time-out
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Job Time-out
Sets the amount of time the printer waits for data to arrive from the
computer.
Default Paper Size
Sets the default print paper size.
Print ID
Sets where to print the user ID on the output paper.
Print Text
Sets whether the printer outputs PDL data (which is not supported by the
printer) as text when the printer receives it.
Banner Sheet Insert Position
Sets where to insert a banner sheet in the output.
Banner Sheet Specify Tray
Sets from which tray a banner sheet is fed.
Substitute Tray
Sets whether to use another size paper when the paper that is loaded in the
specified tray does not match the paper size settings for the current job.
Letterhead 2 Sided*3
Sets whether to print on both sides of letterhead.
A4<>Letter Switch
Sets whether to print A4 size jobs on Letter size paper if A4 is not available
in the paper trays and vice versa (Letter size job on A4 size paper).
Report 2 Sided Print*3
Sets whether to print reports on both sides a sheet of paper.
Use Another Tray
Sets whether to show a message to select another tray when the specified
paper is not available in the paper tray.
*1
Auto-Off Timer feature is available only in certain regions.
*2
This item is available only when the optional 512MB memory module is installed and the optional hard disk is not installed.
*3
This item is available only for Dell C3760dn Color Laser Printer.
Network Settings
Purpose:
To Specify the PostScript communication protocol for this printer.
Values:
Adobe Protocol
Sets PostScript communication protocol for each interface.
USB Settings
Purpose:
To change USB settings on your printer.
Values:
USB Port
Enables the USB interface on your printer.
Adobe Protocol
Sets PostScript communication protocol for each interface.
Dell™ Printer Configuration Web Tool
139
PCL Settings
Purpose:
To change the PCL settings.
Values:
Paper Tray
Sets the paper input tray.
Paper Size
Sets the paper size.
Custom Paper Size - Y
Sets the length of custom size paper. The available range is from 127 mm (5.0 inch) to 355 mm (14.0
inch).
Custom Paper Size - X
Sets the width of custom size paper. The available range is from 77 mm (3.0 inch) to 215 mm (8.5
inch).
Orientation
Sets how text and graphics are oriented on the page.
2 Sided Print
*1
Sets duplexing as the default for all print jobs.
Font
Sets the font from the list of registered fonts.
Symbol Set
Sets a symbol set for the specified font.
Font Size
Sets the font size for scalable typographic fonts.
Font Pitch
Sets the font pitch for scalable mono spaced fonts.
Form Line
Sets the number of lines in a page.
Quantity
Sets the number of copies to print.
Image Enhance
Sets whether to enable the Image Enhancement feature.
Hex Dump
Sets whether to help isolate the source of a print job problem. With Hex Dump selected, all data
sent to the printer is printed in hexadecimal and character representation. Control codes are not
executed.
Draft Mode
Sets whether to print in the draft mode.
Line Termination
Sets how to handle line terminations.
Default Color
Sets the print color mode as Color or Black. This setting is used for print jobs without a specified
color print mode.
Ignore Form Feed
Sets whether to ignore blank pages that only contain Form Feed control codes.
*1
This item is available only for Dell C3760dn Color Laser Printer.
PostScript Settings
Purpose:
To change printer settings that only affect jobs using the PostScript emulation printer language.
Values:
PS Error Report
Sets whether the printer outputs error contents for a PostScript error.
PS Job Time-out
Sets the execution time for one PostScript job.
Paper Select Mode
Sets the way to select the tray for the PostScript mode.
Default Color
Sets the default color mode for the PostScript mode.
PDF Settings
Purpose:
To change the PDF settings.
140
Dell™ Printer Configuration Web Tool
Values:
Quantity
2 Sided Print
Sets the number of copies.
*1
Sets whether to print on both sides of a sheet of paper.
Print Mode
Sets a print mode.
PDF Password
Sets a password.
Re-enter PDF Password
Confirms the set password.
Collation
Sets whether to sort the output.
Output Size
Sets the output paper size.
Layout
Sets the output layout.
Output Color
Sets the output color.
*1
This item is available only for Dell C3760dn Color Laser Printer.
Secure Settings
Panel Lock
Purpose:
To set a limited access to Admin Settings with a password, and to set or change the password.
Values:
Panel Lock Control*1
Enables/Disables password protection for the Admin Settings.
New Password
Sets a password that is required to access the Admin Settings.
Re-enter Password
Confirms the set password.
*1
Some setting items in the Secure Settings are displayed only when this setting item is enabled.
NOTE: You can set the password for the Dell Printer Configuration Web Tool from Set Password in Print Server Settings.
Function Enabled
Purpose:
To specify whether to lock the USB Direct Print function with a password, and to set or change the password.
Values:
USB Direct Print
Sets whether to lock the USB Direct Print function with a password.
New Password
Sets a password that is required to access the USB Direct Print function.
Re-enter Password
Confirms the set password.
NOTE: You can set the password for the Dell Printer Configuration Web Tool from Set Password in Print Server Settings.
Software Download
Purpose:
To set whether to enable download of firmware updates.
Data Encryption
Purpose:
To set whether to encrypt the data.
Dell™ Printer Configuration Web Tool
141
Values:
Data Encryption
Encryption
Sets whether to encrypt the data.
Encryption Key
Sets a key that is required to encrypt.
Re-enter Encryption Key Enter the new key again to confirm.
NOTE: You can enter only characters from 0 to 9, a to z, A to Z, and NULL values for encryption key.
Hard Disk Over Write
NOTE: HDD Disk Over Write feature is available only when the optional hard disk is installed.
Purpose:
To set whether to overwrite the hard disk drive.
Values:
Hard Disk Over Write
Sets whether to overwrite the hard disk drive.
Login Error
Purpose:
To specify how many times an administrator can attempt to log in to Panel Lock and Function Enabled.
Values:
Login Error
Displays how many times an administrator can attempt to log in to Panel Lock and Function
Enabled.
Set Available Time - Print
Purpose:
To specify the time to enable the secure setting for the Print function.
Values:
Set Available Time
Allows you to set the available time period for the Print function.
Start Time
Sets the start time of the available time period for the Print function.
End Time
Sets the end time of the available time period for the Print function.
Recurrence
Sets the day of the week to repeat the setting.
Secure Job Expiration
NOTE: Secure Job Expiration feature is available only when RAM Disk is enabled with the optional 512MB memory module
installed or the optional hard disk is installed.
Purpose:
To specify the date and time to delete the files stored as Secure Print in the optional 512MB memory module or the
optional hard disk drive.
Values:
Expiration Mode
142
Allows you to set the date to delete the files stored as Secure Print in the optional 512MB memory
module or the optional hard disk drive.
Dell™ Printer Configuration Web Tool
Expiration Time
Sets the time to delete the files stored as Secure Print in the optional 512MB memory module or the
optional hard disk drive.
Recurrence
Sets the period to repeat the setting.
Weekly Settings
Sets the day of the week to repeat the setting.
Monthly Settings
Sets the day of the month to repeat the setting.
USB Direct Print Defaults
Purpose:
To create your own USB Direct Print Defaults setting.
Values:
Output Color
Sets whether to print in color or in black and white.
Select Tray
Sets the default input tray.
2 Sided Printing
Sets whether to print on both sides of a sheet of paper.
Multiple-Up
Sets whether to print two or more pages on one side of a sheet of paper.
Collation
Sets whether to sort the output.
PDF Password
Sets a password.
Re-enter PDF Password Confirms the set password.
Printer Maintenance
The Printer Maintenance tab includes the Paper Density, Adjust Transfer Belt Unit, Adjust 2nd BTR, Adjust
Fusing Unit, Auto Registration Adjustment, Color Registration Adjustments, Reset Defaults, Initialize
PrintMeter, Storage, Non-Dell Toner, Adjust Altitude, Clock Settings, and Web Link Customization pages.
Paper Density
Purpose:
To specify the paper density.
Values:
Plain
Sets the density of plain paper to Light or Normal.
Label
Sets the density of labels to Light or Normal.
Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing.)
Values:
K Offset
If faint black colored ghosts appear, try to decrease the value.
YMC Offset
If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease the value.
Adjust 2nd BTR
Purpose:
Dell™ Printer Configuration Web Tool
143
To specify the optimum voltage settings for printing for the 2nd Belt Transfer Roller (2nd BTR). To lower the
voltage, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
CAUTION: The print quality changes depending on the setting values you select for this item.
Values:
Plain
Sets the reference voltage setting for the transfer roller for plain paper within the range of -5 to 10.
Plain Thick
Sets the reference voltage setting for the transfer roller for thick plain paper within the range of -5 to
10.
Covers
Sets the reference voltage setting for the transfer roller for cover paper within the range of -5 to 10.
Covers Thick
Sets the reference voltage setting for the transfer roller for thick cover paper within the range of -5 to
10.
Coated
Sets the reference voltage setting for the transfer roller for coated paper within the range of -5 to 10.
Coated Thick
Sets the reference voltage setting for the transfer roller for thick coated paper within the range of -5 to
10.
Label
Sets the reference voltage setting for the transfer roller for labels within the range of -5 to 10.
Envelope
Sets the reference voltage setting for the transfer roller for envelopes within the range of -5 to 10.
Recycled
Sets the reference voltage setting for the transfer roller for recycled paper within the range of -5 to 10.
Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the temperature, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE: The print quality changes depending on the setting values you select for this item.
Values:
Plain
Sets the temperature settings for the fusing unit for plain paper within the range of -3 to 3.
Plain Thick
Sets the temperature settings for the fusing unit for thick plain paper within the range of -3 to 3.
Covers
Sets the temperature settings for the fusing unit for cover paper within the range of -3 to 3.
Covers Thick
Sets the temperature settings for the fusing unit for thick cover paper within the range of -3 to 3.
Coated
Sets the temperature settings for the fusing unit for coated paper within the range of -3 to 3.
Coated Thick
Sets the temperature settings for the fusing unit for thick coated paper within the range of -3 to 3.
Label
Sets the temperature settings for the fusing unit for labels within the range of -3 to 3.
Envelope
Sets the temperature settings for the fusing unit for envelopes within the range of -3 to 3.
Recycled
Sets the temperature settings for the fusing unit for recycled paper within the range of -3 to 3.
Auto Registration Adjustment
Purpose:
To specify whether to automatically perform color registration adjustment.
144
Dell™ Printer Configuration Web Tool
Color Registration Adjustments
Purpose:
To specify whether to manually perform color registration adjustment.
Manual Color Registration Adjustments are required such as when the printer is initially installed and after the
printer is moved.
NOTE: The Color Registration Adjustments feature can be configured when Auto Registration Adjustment is set to Off.
Values:
Auto Correct
Click Start to automatically perform color registration correction.
Color Regi Chart
Click Start to print a color registration chart. The color registration chart prints a lattice pattern of
yellow, magenta, and cyan lines. On the chart, look at the values on the right side that are next to the
line that is perfectly straight for each of the three colors. If the value for this line is 0, color registration
adjustment is not required. If the value for this line is any value other than 0, specify the adjustment
values under Color Registration Adjustments.
Color Registration
Adjustments
Sets lateral (perpendicular to paper feed direction) and process (paper feed direction) color
adjustment values individually for Yellow, Magenta, and Cyan within the range of -9 to 9.
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Reset Defaults and
restart printer.
Click Start to reset the default setting and restart the printer.
Initialize PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Storage
NOTE: Storage feature is available only when RAM Disk is enabled with the optional 512MB memory module installed or the
optional hard disk is installed.
Purpose:
To clear all files stored in the optional 512MB memory module or the optional hard disk, or format the optional hard
disk.
Values:
Clear Storage*1
All Clear
Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Print, and Public Mail Box Print in the optional 512MB memory module or the
optional hard disk.
Secure Document Click Start to clear all files stored as Secure Print, Proof Print, Private Mail Box
Print, and Public Mail Box Print in the optional 512MB memory module or the
optional hard disk.
Stored Document Click Start to clear all files stored in the optional 512MB memory module or the
optional hard disk.
Dell™ Printer Configuration Web Tool
145
Format Hard Disk*2
Format Hard Disk Click Start to format the optional hard disk. All fonts, forms and files for Secure
Print, Proof Print, Private Mail Box Print, and Public Mail Box Print stored in the
optional hard disk are cleared.
*1
This item is available only when RAM Disk is enabled with the optional 512MB memory module installed or the optional hard disk is
installed.
*2
This item is available only when the optional hard disk is installed.
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
WARNING: Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
Clock Settings
Purpose:
To specify the clock settings.
Values:
Date Format
Sets the date format; YYYY/MM/DD, MM/DD/YYYY, or DD/MM/YYYY.
Time Format
Sets the time format; 24 Hour Clock or 12 Hour Clock.
Time Zone
Sets the time zone.
Set Date
Sets the current date.
Set Time
Sets the current time.
Web Link Customization
Purpose:
To specify a link used for ordering consumables, which can be accessed from Order Supplies at: in the left frame.
Values:
Select Reorder URL
Sets a URL to be linked to Order Supplies at:
Regular
Displays the regular URL (http://accessories.us.dell.com/sna) that can be linked to Order Supplies
at:.
Premier
Displays the premier URL (http://premier.dell.com) that can be linked to Order Supplies at:.
Print Server Settings
Use the Print Server Settings menu to set the type of printer interface and the necessary conditions for
communication.
The following tabbed pages are displayed in the top of the right frame.
146
Dell™ Printer Configuration Web Tool
Print Server Reports
The Print Server Reports tab includes the Print Server Setup Page and the E-Mail Alert Setup Page.
Print Server Setup Page
Purpose:
To verify the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol and printing
ports. On this page, you can only verify the settings of items. If you want to change the settings, go to the pages in
the Print Server Settings tab.
Values:
Ethernet*1
Wireless Settings*2
TCP/IP Settings
Ethernet Settings
Displays the current settings of Ethernet transmission rate and the duplex
settings.
Current Ethernet
Settings
Displays the current Ethernet settings.
MAC Address
Displays the Media Access Control (MAC) address of the printer.
SSID
Displays the name that identifies the network.
Network Type
Displays the network type from either the Ad-Hoc or Infrastructure mode.
MAC Address
Displays the MAC address of the wireless adapter.
Link Channel
Displays the channel number of the connection.
Link Quality
Displays the quality of the connection.
IP Mode
Displays the IP mode.
Host Name
Displays the host name.
*3
IPv4
*4
IPv6
IP Address Mode
Displays the IP address mode.
IP Address
Displays the IP address.
Subnet Mask
Displays the subnet mask.
Gateway Address
Displays the gateway address.
Enable Stateless Address
Displays whether to enable the stateless
address.
Use Manual Address
Displays whether to set the IP address
manually.
Get IP Address from
DHCP
Displays whether to automatically set the IP
address via DHCP.
Manual Address*5
Stateless Address 1-3
Displays the IP address.
*6
Displays the stateless addresses.
Stateful Address 1-3
Displays the stateful addresses.
Link Local Address*6
Displays the link local address.
Manual Gateway
Address*5
Displays the gateway address.
Auto Configure Gateway
Address*6
Displays the gateway address.
Dell™ Printer Configuration Web Tool
147
IPv4*3
DNS
IPv6*4
Get DNS Server Address
from DHCP
Displays whether to automatically set the
DNS server address via DHCP.
Current DNS Server
Address
Displays the current DNS server address.
Get DNS Server Address
from DHCPv6-lite
Displays if the printer receives the DNS server
address automatically from the DHCPv6-lite
server.
Current DNS Server
Address
Displays the current DNS server address.
DNS Dynamic Update
(IPv4)
Displays the status of the DNS Dynamic
Update feature.
DNS Dynamic Update
(IPv6)
Displays the status of the DNS Dynamic
Update feature.
Auto Generate Search List Displays whether to automatically generate a
search list.
WINS*3
LPD
Port9100
IPP
WSD
FTP
148
Search Domain Name
Displays the search domain name.
Time-out
Displays the time-out period.
Priority to IPv6 DNS
Name Resolution*7
Displays whether to use the DNS Name
Resolution feature.
WINS Mode
Displays whether to automatically set the primary and secondary WINS
server addresses via DHCP.
WINS Primary Server
Displays the primary WINS server address.
WINS Secondary Server
Displays the secondary WINS server address.
Port Status
Displays the port status of the Line Printer Daemon (LPD) protocol.
Connection Time-Out
Displays the connection time-out period.
Port Status
Displays the port status.
Port Number
Displays the port number.
Connection Time-Out
Displays the connection time-out period.
Port Status
Displays the port status.
Printer URI
Displays the printer URI.
Connection Time-Out
Displays the connection time-out period.
Port Number
Displays the port number.
Maximum Sessions
Displays the maximum number of connections received simultaneously by
the client.
WSD Print
Displays whether to use WSD for printing.
Port Number
Displays the WSD port number.
Receive Time-Out
Displays the receive time-out period.
Notification Time-Out
Displays the notification time-out period.
Maximum Number of
TTL
Displays the maximum number of TTLs.
Maximum Number of
Notification
Displays the maximum number of notifications.
Port Status
Displays the port status.
Connection Time-Out
Displays the connection time-out period.
Dell™ Printer Configuration Web Tool
HTTP
SMB
Bonjour (mDNS)
Telnet
SNMP
SNTP
AirPrint
Google Cloud Print
Proxy Server
Port Status
Displays the port status.
Port Number
Displays the port number.
Simultaneous
Connections
Displays the maximum number of simultaneous connections.
Connection Time-Out
Displays the connection time-out period.
Port Status
Displays the port status.
Host Name
Displays the host name.
Workgroup
Displays the workgroup.
Maximum Sessions
Displays the maximum number of sessions.
Unicode Support
Displays whether to notify the host name and workgroup name in Unicode
characters during SMB transmission.
Auto Master Mode
Displays whether to enable the Auto Master Mode.
Encrypt Password
Displays whether to encrypt the password during SMB transmission.
Job Time-Out
Displays the job time-out period.
Connection Time-Out
Displays the connection time-out period.
Port Status
Displays the port status.
Host Name
Displays the host name.
Printer Name
Displays the printer name.
Wide-Area Bonjour
Displays the status of the Wide-Area Bonjour feature.
Port Status
Displays the port status.
Connection Time-Out
Displays the connection time-out period.
Port Status
Displays the port status.
Enable SNMP v1/v2c
Protocol
Displays the status of the SNMP v1/v2c feature.
Enable SNMP v3
Protocol
Displays the status of the SNMP v3 feature.
Port Status
Displays the port status.
IP Address / Host Name
Displays the IP address or the host name of the SNTP server.
Connection Time-Out
Displays the connection time-out period.
Time Synchronization
Interval
Displays the interval for performing time synchronization using SNTP.
Port Status
Displays the port status.
Name
Displays the name of AirPrint.
Location
Displays the location of the printer.
Geo-Location
Displays the physical location of the printer.
Port Status
Displays the port status.
Registration state
Displays the registration state.
Use Proxy Server
Displays the status of proxy server.
Address to Bypass Proxy
Server
Displays the address of the bypass proxy server.
Server Name
Displays the server name.
Port Number
Displays the port number.
Authentication
Displays the status of authentication feature.
Dell™ Printer Configuration Web Tool
149
Authentication System
Authentication System
Settings(for ColorTrack
PRO)
Displays the authentication method.
SSL/TLS
HTTP - SSL/TLS
Communication
Displays the status of the HTTP - SSL/TLS Communication.
HTTP - SSL/TLS
Communication Port
Number
Displays HTTP - SSL/TLS Communication Port Number.
LDAP - SSL/TLS
Communication*8
Displays the status of the LDAP - SSL/TLS Communication.
Verify Remote Server
Certificate*8
Displays the status of the Verify Remote Server Certificate.
Protocol
Displays the protocol status.
IKE
Displays IKE authentication.
Enable IEEE 802.1x
Displays the status of IEEE 802.1x.
Authentication Method
Displays the setting of authentication method for IEEE 802.1x.
Access List
Displays the list of IP addresses that are permitted or denied access to the
printer.
IPsec Settings
802.1x*1
IP Filter (IPv4)
*9
*1
This item is available only when the printer is connected using an Ethernet cable.
*2
This item is available only when the printer is connected using the wireless network.
*3
This item is displayed when IPv4 Mode or Dual Stack in IP Mode is selected.
*4
This item is displayed when IPv6 Mode or Dual Stack in IP Mode is selected.
*5
This item is displayed only when Use Manual Address is set to Enable.
*6
This item is displayed only when an IP address has been assigned.
*7
This item is available only when using IPv6 dual mode.
*8
This item is displayed only when the optional hard disk is installed and is set to On for encryption.
*9
This item is available only for LPD or Port9100.
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the EMail Alert feature. In this page, you can only verify the settings of items. If you want to change the settings, go to the
pages in the Print Server Settings tab.
Values:
E-Mail Server Settings
Port Status
Displays the port status.
Primary SMTP Gateway Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.
150
SMTP Port Number
Displays the SMTP port number.
E-Mail Send
Authentication
Displays the authentication method for outgoing e-mail.
POP3 Server Address
Displays the POP3 (Post Office Protocol 3) server address.
POP3 Port Number
Displays the POP3 port number.
Reply Address
Displays the IP address of servers connected with SMTP protocol when data
is incoming.
SMTP Server
Connection
Displays the status of the SMTP server connection.
Dell™ Printer Configuration Web Tool
E-Mail Alert Settings
E-Mail List 1
Select Alerts for List 1
Displays the acceptable e-mail addresses for
the E-Mail Alert feature specified in E-Mail
List 1.
Supplies Alerts
Displays the e-mail alert receive status for
consumables.
Paper Handling Alerts
Displays the e-mail alert receive status for
paper handling.
Service Call
Displays the e-mail alert receive status for
service calls.
E-Mail List 2
Select Alerts for List 2
Displays the acceptable e-mail addresses for
the E-Mail Alert feature specified in E-Mail
List 2.
Supplies Alerts
Displays the e-mail alert receive status for
consumables.
Paper Handling Alerts
Displays the e-mail alert receive status for
paper handling.
Service Call
Displays the e-mail alert receive status for
service calls.
Print Server Settings
The Print Server Settings tab includes the Basic Information, Port Settings, TCP/IP, SMB, E-Mail Alert, Bonjour
(mDNS), SNMP, SNTP, Wireless LAN, AirPrint, Google Cloud Print, Proxy Server, and Reset Print Server pages.
Basic Information
Purpose:
To configure basic information of the printer.
Values:
System Settings
EWS Settings
Printer Name
Sets the name of the printer.
Location
Sets the location of the printer.
Contact Person
Sets the contact name, number, and other information of the printer
administrator and service center.
Administrator E-Mail
Address
Sets the contact address of the printer administrator and service center.
Asset Tag Number
Enters the asset tag number for the printer.
Auto Refresh
Automatically refreshes the contents of the status display pages.
Auto Refresh Interval
Sets the time interval for refreshing the contents of the status display pages
automatically from 15 to 600 seconds.
NOTE: The Auto Refresh feature is effective for the contents of the top frame, Printer Status page, Job List page, and Completed
Jobs page.
Port Settings
Purpose:
To enable or disable printing ports and management protocol features.
Dell™ Printer Configuration Web Tool
151
Values:
Ethernet*1
Port Status
*1
Ethernet Settings
Auto
Detects the Ethernet transmission rate and the
duplex settings automatically.
10Base-T Half-Duplex
Selects 10Base-T Half-Duplex as the default
value.
10Base-T Full-Duplex
Selects 10Base-T Full-Duplex as the default
value.
100Base-TX Half-Duplex
Selects 100Base-TX Half-Duplex as the default
value.
100Base-TX Full-Duplex
Selects 100Base-TX Full-Duplex as the default
value.
1000Base-T Full-Duplex
Selects 1000Base-T Full-Duplex as the default
value.
Current Ethernet Settings
Displays the current settings of the Ethernet.
MAC Address
Displays the MAC address of the printer.
LPD
Sets whether to enable LPD.
Port9100
Sets whether to enable Port9100.
IPP
Sets whether to enable IPP.
WSD Print
Sets whether to enable WSD Print.
FTP
Sets whether to enable FTP.
SMB
Sets whether to enable SMB.
Bonjour (mDNS)
Sets whether to enable Bonjour (mDNS).
E-Mail Alert
Sets whether to enable E-Mail Alert.
Telnet
Sets whether to enable Telnet.
SNMP
Sets whether to enable SNMP.
SNTP
Sets whether to enable SNTP.
Google Cloud Print
Sets whether to enable Google Cloud Print.
This item is available only when the printer is connected using an Ethernet cable.
NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the
settings, click the Apply New Settings button to apply the new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
152
Dell™ Printer Configuration Web Tool
Values:
TCP/IP
Settings
IP Mode
Sets the IP mode.
Host Name
Sets the host name.
IPv4
IPv6
IP Address Mode
Sets the method for acquiring the IP address.
Manual IP Address
When an IP address is being set manually, the IP is allocated to
the printer using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254.
127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
Manual Subnet Mask
When an IP address is being set manually, the subnet mask is
specified using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255.
255.255.255.255 cannot be specified as the subnet mask.
Manual Gateway
Address
When an IP address is being set manually, the gateway address
is specified using the format nnn.nnn.nnn.nnn. Each octet
that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
Enable Stateless
Address
Select the check box to enable the stateless address.
Use Manual Address
Select the check box to set the IP address manually.
Get IP Address from
DHCP
Allows you to enable or disable the automatic setting of the IP
address via DHCP.
Manual Address
Sets the IP address. To specify an IPv6 address, enter the
address followed by a slash (/) and then "64". For details,
consult your system administrator.
Manual Gateway
Address
Sets the gateway address.
Dell™ Printer Configuration Web Tool
153
DNS
DNS Domain Name Sets the DNS domain name.
IPv4
IPv6
Get DNS Server
Address from DHCP
Allows you to enable or disable the automatic setting of the
DNS server address via DHCP.
Manual DNS Server
Address
Manually sets the DNS server address in xxx.xxx.xxx.xxx
format when Get DNS Server Address from DHCP is not
selected.
Get DNS Server
Select the check box to get the DNS server address
Address from DHCPv6- automatically from the DHCPv6-lite server.
lite
Manual DNS Server
Address
Sets the DNS server address.
DNS Dynamic Update Select the check box to enable dynamic updates to DNS.
(IPv4)
DNS Dynamic Update Select the check box to enable dynamic updates to DNS.
(IPv6)
WINS
WINS Mode
Auto Generate Search
List
Select the check box to automatically generate the search list.
Search Domain Name
Sets the search domain name. Up to 255 alphanumeric
characters, periods, and hyphens can be used. If you need to
specify more than one domain name, separate them using a
comma or semicolon.
Time-out
Sets the time-out period between 1 and 60 seconds.
Priority to IPv6 DNS
Name Resolution
Select the check box to enable the DNS Name Resolution
feature.
Allows you to enable or disable the automatic setting of the primary and secondary
WINS server addresses via DHCP.
WINS Primary Server Manually sets the primary WINS server address in xxx.xxx.xxx.xxx format when WINS
Mode is not selected.
LPD
Port9100
IPP
154
WINS Secondary
Server
Manually sets the secondary (backup) WINS server address in xxx.xxx.xxx.xxx format
when WINS Mode is not selected.
Connection TimeOut
Sets the connection time-out period from 1 to 3,600 seconds.
IP Filter (IPv4)
Click IP Filter (IPv4) to set the IP Filter settings on the IP Filter (IPv4) page.
Port Number
Sets the port number from 9,000 to 9,999.
Connection TimeOut
Sets the connection time-out period between 1 and 1,000 seconds.
IP Filter (IPv4)
Click IP Filter (IPv4) to set the IP filter settings on the IP Filter (IPv4) page.
Printer URI
Displays the printer URI.
Connection TimeOut
Sets the connection time-out period from 1 to 1,000 seconds.
Port Number
Displays the port number for receiving requests from the client.
Maximum Sessions
Displays the maximum number of connections received simultaneously by the client.
Dell™ Printer Configuration Web Tool
WSD
FTP
HTTP
Telnet
Port Number
Sets the port number to 80 or from 8,000 to 9,999.
Receive
Time-Out
Sets the receive time-out period from 1 to 65,535 seconds.
Notification TimeOut
Sets the notification time-out period from 1 to 60 seconds.
Maximum Number
of TTL
Sets the maximum number of TTL from 1 to 10.
Maximum Number
of Notification
Sets the maximum number of notifications from 10 to 20.
Password
Sets the password for FTP.
Re-enter Password
Enter the password again to confirm it.
Connection TimeOut
Sets the connection time-out period from 1 to 1000 seconds.
Port Number
Sets the port number to 80 or from 8,000 to 9,999.
Simultaneous
Connections
Displays the maximum number of simultaneous connections.
Connection TimeOut
Sets the connection time-out period from 1 to 255 seconds.
Password
Sets the password for Telnet.
Re-enter Password
Confirms the set password.
Connection TimeOut
Sets the connection time-out period from 1 to 1,000 seconds.
To configure the IP Filter feature, enter an IP address to be filtered in the Address field and the subnet mask in the
Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is appended to the current value.
IP Filter Setup Procedure
You can set up to a maximum of five items and the first item set takes priority. When setting multiple filters, enter
the shortest address first followed by a slightly longer address, a longer address and so on.
Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the "192.168.100.10" IP address.
1 Click the first column of the Access List row 1.
2 Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
3 Select Accept.
4 Click Apply New Settings.
Disabling Printing From a Specified User
The following describes the procedure to disable printing only from the "192.168.100.10" IP address.
1 Click the first column of the Access List row 1.
2 Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
3 Select Reject.
4 Click the first column of the Access List row 2.
5 Enter "0.0.0.0" in the Address field and "0.0.0.0" in the Address Mask field.
6 Select Accept.
7 Click Apply New Settings.
Dell™ Printer Configuration Web Tool
155
Enabling and Disabling Printing from Network Addresses
You can enable printing from the "192.168" network address and disable printing from the "192.168.200"
network address.
The example below describes how to enable printing from the "192.168.200.10" IP address.
1 Click the first column of the Access List row 1.
2 Enter "192.168.200.10" in the Address field and "255.255.255.255" in the Address Mask field.
3 Select Accept.
4 Click the first column of the Access List row 2.
5 Enter "192.168.200.0" in the Address field and "255.255.255.0" in the Address Mask field.
6 Select Reject.
7 Click the first column of the Access List row 3.
8 Enter "192.168.0.0" in the Address field and "255.255.0.0" in the Address Mask field.
9 Select Accept.
10 Click Apply New Settings.
SMB
Purpose:
To specify the setting of the Server Message Block (SMB) protocol.
Values:
Host Name
Sets the host name of the server computer.
Workgroup
Sets the workgroup.
Maximum Sessions
Sets the maximum number of sessions.
Unicode Support
Sets whether to notify the host name and workgroup name in Unicode characters during
SMB transmission.
Auto Master Mode
Sets whether to enable the Auto Master Mode.
Encrypt Password
Sets whether to encrypt the password.
Job Time-Out
Sets the job time-out period between 60 and 3,600 seconds.
Connection Time-Out
Sets the connection time-out period between 60 and 3,600 seconds.
E-Mail Alert
Purpose:
To configure detailed settings of E-Mail Alert. This page can also be displayed by clicking the E-Mail Alert in the
left frame.
Values:
E-Mail Server Settings
156
Primary SMTP Gateway
Sets the primary SMTP gateway.
SMTP Port Number
Sets the SMTP port number. This must be 25, 587 or between 5,000 and
65,535.
E-Mail Send
Authentication
Sets the authentication method for outgoing e-mail.
Dell™ Printer Configuration Web Tool
E-Mail Alert Settings
SMTP Login User
Sets the SMTP login user. Up to 63 alphanumeric characters, periods,
hyphens, underscores, and at symbols (@) can be used. If specifying more
than one address, separate them using commas.
SMTP Login Password
Sets the SMTP account password using up to 31 alphanumeric characters.
Re-enter SMTP Login
Password
Confirms the set SMTP account password.
POP3 Server Address*1
Sets the POP3 server address in IP address format of "aaa.bbb.ccc.ddd" or
as a DNS host name using up to 63 characters.
POP3 Port Number*1
Sets the POP3 server port number. This must be 110 or between 5,000 and
65,535.
POP User Name*1
Sets the POP3 account user name. Up to 63 alphanumeric characters,
periods, hyphens, underscores, and at symbols (@) can be used. If
specifying more than one address, separate them using commas.
POP User Password*1
Sets the POP3 account password using up to 31 alphanumeric characters.
Re-enter POP User
Password*1
Confirms the set password.
Reply Address
Designates the reply e-mail address sent with each E-mail Alert.
SMTP Server
Connection
Displays the status of the SMTP server connection.
E-Mail List 1
Select Alerts for List 1
Sets acceptable e-mail addresses for the EMail Alert feature using up to 255
alphanumeric characters.
Supplies Alerts
Select the check box to receive an E-Mail
Alert for consumables.
Paper Handling Alerts
Select the check box to receive an E-Mail
Alert for paper handling.
Service Call
Select the check box to receive an E-Mail
Alert for Service Calls.
E-Mail List 2
Select Alerts for List 2
*1
Sets acceptable e-mail addresses for the EMail Alert feature using up to 255
alphanumeric characters.
Supplies Alerts
Select the check box to receive an E-Mail
Alert for consumables.
Paper Handling Alerts
Select the check box to receive an E-Mail
Alert for paper handling.
Service Call
Select the check box to receive an E-Mail
Alert for Service Calls.
This item is available only when POP before SMTP (Plain) or POP before SMTP (APOP) for E-Mail Send Authentication is selected.
Dell™ Printer Configuration Web Tool
157
Bonjour (mDNS)
Purpose:
To configure the detailed settings of Bonjour.
Values:
Host Name
Sets the host name up to 63 alphanumeric characters and "-" (dash). The original setting will remain
valid if no input is made.
Printer Name
Sets the printer name up to 63 alphanumeric characters and symbol sets. The original setting will
remain valid if no input is made.
Wide-Area Bonjour
Select the check box to enable the Wide-Area Bonjour protocol.
SNMP
Purpose:
To configure the detailed settings of SNMP.
Values:
SNMP Configuration
Enable SNMP v1/v2c Select the check box to enable the SNMP v1/v2c protocol.
Protocol
Edit SNMP v1/v2c
Properties
Click to display the SNMP v1/v2c page and to edit the setting of SNMP
v1/v2c protocol from the page.
Enable SNMP v3
Protocol
Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3
Properties
Click to display the SNMP v3 page and to edit the setting of SNMP v3
protocol from the page.
You can click this item only when SSL communication is enabled.
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
158
Dell™ Printer Configuration Web Tool
Values:
Community Name
Trap Notification 1-4
Community Name
(Read only)*1
Sets the community name to access (read only) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for community name in the previous settings will not be displayed
on the screen. The default Read Community is public.
Re-enter Community
Name (Read only)*1
Enters the community name to access (read only) data again to confirm it.
Community Name
(Read/Write)*1
Sets the community name to access (read and write) data using up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for community name in the previous settings will not be displayed
on the screen. The default Read/Write Community is private.
Re-enter Community
Name (Read/Write)*1
Enters the community name to access (read and write) data again to
confirm it.
Community Name
(Trap)*1
Sets the community name used for trap up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters
entered for Community Name (Trap) in the previous settings will not be
displayed on the screen. The default Trap Community is " " (NULL).
Re-enter Community
Name (Trap)*1
Enters the community name used for trap again to confirm it.
Trap Address Type
Select the check boxes to notify trap occurrence. In this case, specify the IP
address and IP socket in the following format:
Trap Address
Port Number
Notify
IPv4
Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm
format. Each section of "nnn" is a variable value between 0 and 255. Note
that values 127 and 224-254 are not valid for the first three-digits only. IP
socket mmmmm is a variable value between 0 and 65,535.
IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section
of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket
mmmmm is a variable value between 0 and 65,535.
Authenticate Error Trap Select the check box to notify Authenticate Error Trap.
*1
The default value can be changed by using Dell Printer Configuration Web Tool.
SNMP v3
Purpose:
To edit the detailed settings of SNMP v3 protocol.
To enter this page, click Edit SNMP v3 Properties in the SNMP page.
Dell™ Printer Configuration Web Tool
159
Values:
Administrator Account
Account Enabled
Select the check box to enable the administrator account.
User Name
Enters the user name of the administrator account.
Authentication
Password
Sets the authentication password of the administrator account using 8 to 32
alphanumeric characters.
Re-enter Authentication Confirms the set password.
Password
Print Drivers / Remote
Client Account
Privacy Password
Sets the privacy password of the administrator account using 8 to 32
alphanumeric characters.
Re-enter Privacy
Password
Confirms the set password.
Account Enabled
Select the check box to enable the print drivers and remote client account.
Reset to default
Password
Click to reset the password for the print drivers and remote client account
to default.
SNTP
Purpose:
To configure the SNTP server settings in order to perform time synchronization through SNTP.
Values:
SNTP
IP Address / Host Name Sets the IP address or the host name of the SNTP server.
Connection Time-Out
Sets the connection time-out period from 1 to 120 seconds.
Time Synchronization
Interval
Sets the interval for performing time synchronization using SNTP.
Last Connection Time
Displays the last date and time when your printer was connected to the
SNTP server.
Connection Status
Displays the status of the connections between the SNTP server and your
printer.
Wireless LAN
NOTE: Wireless LAN feature is available only when the printer is connected using the wireless network.
Purpose:
To configure the detailed setting for the wireless network.
To use the wireless adapter, be sure to disconnect the Ethernet cable.
NOTE: Once wireless LAN is activated, wired LAN protocol will be disabled.
Values:
Wireless Settings
Security Settings
160
SSID
Sets the name that identifies the wireless network. Up to 32 alphanumeric
characters can be entered.
Network Type
Sets the network type from either Ad-Hoc or Infrastructure.
MAC Address
Displays the MAC address of the wireless adapter for the printer.
Link Channel
Displays the channel number of the wireless connection for the printer.
Link Quality
Displays the quality of the wireless network connection for the printer.
Encryption
Select the encryption type from the list.
Dell™ Printer Configuration Web Tool
No Security
Sets No Security to configure the wireless
setting without specifying an encryption type
from WEP, WPA-PSK, and WPA-Enterprise.
WEP
Sets the WEP to use through the wireless
network.
WPA-PSK TKIP*1, 2
Sets the WPA-PSK TKIP to use through the
wireless network.
WPA-PSK AES/WPA2-PSK Sets the WPA-PSK AES/WPA2-PSK AES to
use through the wireless network.
AES*1, 2
WEP
WPA-Enterprise
WPA-Enterprise
AES/WPA2-Enterprise
AES*2, 3, 4
Sets the WPA-Enterprise AES/WPA2Enterprise AES to use through the wireless
network.
Mixed Mode PSK*1, 2
Sets the Mixed Mode PSK to use through the
wireless network. Mixed Mode PSK
automatically selects the encryption type
from either WPA-PSK TKIP, WPA-PSK AES,
or WPA2-PSK AES.
Mixed Mode
Enterprise*2, 3, 4
Sets the Mixed Mode Enterprise to use
through the wireless network. Mixed Mode
Enterprise automatically selects the
encryption type from either WPA-Enterprise
TKIP, WPA-Enterprise AES, or WPA2Enterprise AES.
Select the WEP key code from either Hex or Ascii.
WEP Key 1
Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 1
Enters the WEP key 1 again to confirm it.
WEP Key 2
Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 2
Enters the WEP key 2 again to confirm it.
WEP Key 3
Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 3
Enters the WEP key 3 again to confirm it.
WEP Key 4
Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Transmit Key
*4, 5
Sets the WPA-Enterprise TKIP to use
through the wireless network.
Encryption
Re-enter WEP Key 4
WPA-PSK
WPA-Enterprise
TKIP*2, 3, 4
*6
Enters the WEP key 4 again to confirm it.
Sets the transmit key type from the list.
Pass Phrase
Sets the pass phrase.
Re-enter Pass Phrase
Enters the pass phrase again to confirm it.
EAP-Identity
Sets the EAP-Identity for the authentication.
Authentication Method Shows the authentication method.
Login Name
Sets the login name for the authentication.
Password
Sets the password.
Re-enter Password
Enters the password again to confirm it.
Dell™ Printer Configuration Web Tool
161
*1
For encryption, AES or TKIP method is used.
*2
This item is available only when Infrastructure is selected for Network Type.
*3
For authentication and encryption by digital certificate, AES or TKIP method is used.
*4
This item is displayed only when the optional hard disk is installed and is set to On for encryption.
*5
To activate the setting, import a certificate which supports wireless LAN (server/client) on the SSL/TLS pages, and enable the relevant
certificate in advance.
*6
When Auto is selected for Transmit Key, the key set specified for WEP Key 1 is used.
AirPrint
Purpose:
To configure the detailed setting of AirPrint.
Values:
AirPrint
Supply Levels
Enable AirPrint
Click to enable the printer for AirPrint.
Name
Enters the name that is to be displayed as an AirPrint printer.
Location
Sets the location of the printer.
Geo-Location
Sets the physical location of the printer.
Cyan Toner Cartridge
Displays the cyan toner level.
Magenta Toner
Cartridge
Displays the magenta toner level.
Yellow Toner Cartridge
Displays the yellow toner level.
Black Toner Cartridge
Displays the black toner level.
Google Cloud Print
Purpose:
To register the printer to Google Cloud Print.
Values:
Google Cloud Print*1
(Registration state)
Displays the Google Cloud Print registration state.
Register This Device to Click to register the printer to Google Cloud Print.
Google Cloud Print
*1
Google Cloud Print can only be used when the machine is using IPv4.
Proxy Server
Purpose:
To configure the Proxy Server settings.
162
Dell™ Printer Configuration Web Tool
Values:
Proxy Server
Use Proxy Server
Sets whether to enable the use of a proxy server.
Address to Bypass Proxy Sets the address to bypass proxy server.
Server
Server Name
Sets the name of the proxy server.
Port Number
Sets the port number from 1 to 65535.
Authentication
Sets whether to enable authentication.
Login Name
Sets the login name for the proxy server.
Password
Sets the login password for the proxy server.
Retype Password
Confirms the set password.
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM Memory
and restart printer.
Click Start to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Restart Printer
Click Start to reboot the printer.
Security
The Security tab includes Set Password, Authentication System, Kerberos Server, LDAP Server, LDAP
Authentication, SSL/TLS, IPsec, 802.1x, and IP Filter (IPv4).
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame.
NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE: You can set the password for access to Admin Settings from Panel Lock in Printer Settings.
Values:
Administrator Password
Sets the password using up to 128 alphanumeric characters (excluding spaces and
colons). If more than 128 alphanumeric characters are specified, only the first 128
alphanumeric characters will be valid.
Re-enter Administrator Password
Confirms the set password.
Access denial by the authentication
failure of the Administrator
Sets the amount of time the administrator should wait for the access to the printer
setup from Dell Printer Configuration Web Tool. Sets the time period from 5 to 255
seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode
is disabled.
Authentication System
Purpose:
To specify the server authentication type, the server response time-out, or the search time-out.
Dell™ Printer Configuration Web Tool
163
Values:
Authentication Type
(for ColorTrack PRO)
Authentication System
Settings
Select the authentication system from the list.
Optional Information
Server Response TimeOut
Sets the amount of time the printer should wait for response from the
server. Sets the time period from 1 to 75 seconds.
Search Time-Out
Sets the amount of time the printer should wait for searching for the
server. Sets the time period from 5 to 120 seconds.
Kerberos Server
Purpose:
To specify the settings for the Kerberos server.
Values:
Kerberos Server
(for ColorTrack PRO)
IP Address / Host Name Sets the IP address or host name, and the port address. The port address
& Port
must be 88 or between 5,000 and 65,535.
Domain Name
Enter the domain name.
LDAP Server
Purpose:
To specify the settings of the LDAP server.
Values:
Server Information
(for ColorTrack PRO)
IP Address / Host Name Sets IP address or the host name, and the port address. The port address
& Port
must be 389, 3268, or between 5,000 and 65,535.*1
LDAP Server
Displays the current software information of the LDAP server.
Optional Information
(for ColorTrack PRO)
Search Directory Root
Enters the search directory root.
Login Name
Enters the login name.
Password
Enters the login password using 1 to 127 alphanumeric characters. If the
password is left blank (NULL), you cannot log in to a server.
Re-enter-Password
Enters the login password again to confirm it.
Search
Time-Out
Select Wait LDAP Server Limit to follow the time specified by the LDAP
server. Select Wait to specify the time between 5 and 120 seconds.
*1
When the optional hard disk is installed, 636 and 3269 also can be specified as the port address.
LDAP Authentication
Purpose:
To specify the LDAP server authentication method.
Values:
LDAP Authentication
(for ColorTrack PRO)
164
Authentication Method
Shows the authentication method.
Use Added Text String
Select whether to use the added text string from the list.
Text String Added to
User Name
Enter the added text string.
Dell™ Printer Configuration Web Tool
SSL/TLS
Purpose:
To specify the settings for the SSL encryption communication to the printer, and set/delete the certificate used for
IPsec, LDAPS, or Wireless LAN.
Values:
HTTP-SSL/TLS
Communication*1
Select the check box to enable the HTTP-SSL/TLS Communication.
HTTP-SSL/TLS
Communication Port
Number
Sets the port number, which is not identical with that of HTTP for SSL/TLS. This must be 443 or
between 8000 and 9999.
LDAP-SSL/TLS
Communication*1, 2
Select the check box to enable the LDAP, and access is established using SSL/TLS communication.
Verify Remote Server
Certificate*2
Select the check box to enable the Verify Remote Server Certificate function.
Generate Self-Signed
Certificate*3
Click to display the Generate Self-Signed Certificate page and to create a security certification from
the page. The Generate Self-Signed Certificate button is available only when the self-signed
certificate is not generated.
Select the public key method of the self-signed certificate.
Size of Public Key
Select the size of public key.
Issuer
Sets the issuer of SSL self-signed certificate.
Generate Signed
Certificate
Click to generate the SSL self-signed certificate.
Click to display the Upload Signed Certificate page and to upload the certificate file to the device
from the page.
Upload Signed
Certificate*3, 4
Certificate
Management*3, 4
Certificate List
Public Key Method
*3
Certificate Details*3
Password
Enter the password to upload the certificate file.
Re-enter Password
Enter the password again for confirmation.
File Name
Click Browse to browse the file name to upload to the device.
Import
Click Import to upload the certificate file to the device.
Click to display the Certificate Management page and to manage a security certification from the
page.
Category
Select the device to certificate.
Certificate Purpose
Select the connection to certificate.
Certificate Order
Select the order to certificate.
Display the List
Click to display the Certificate List page.
Category
Displays the device to certificate selected at the Certificate Management
page.
Certificate Purpose
Displays the connection to certificate selected at the Certificate
Management page.
Issued To
Displays the list of certificate order.
Validity
Displays whether certificate is valid or not.
Certificate Details
Click to display the Certificate Details page. The SSL/TLS page is
displayed when no item in the Issued To column is selected.
Category
Displays the device to certificate selected at the Certificate Management
page or SSL/TLS page.
Issued To
Displays the device to certificate.
Dell™ Printer Configuration Web Tool
165
Issuer
Displays the issuer to certificate.
Serial Number
Displays the serial number of the device.
Public Key Method
Displays the public key method.
Size of Public Key
Displays the size of public key.
Valid From
Displays the time the certificate is valid.
Valid Until
Displays the time the certificate is invalid.
Status
Displays whether certificate is valid or not.
Certificate Purpose
Displays the purpose of certificate.
Certificate Selection
Status
Displays the type of device certificate you selected.
E-mail Address
Displayed only when an e-mail address is specified in the certificate.
Use this certificate*2
Click to apply this certificate to the device.
Delete
Click to delete this certificate.
Export This
Certificate*2
Click to export the certificate to the other device.
*1
This item is available only when the self-signed certificate has been generated.
*2
This item is displayed only when the optional hard disk is installed and is set to On for encryption.
*3
This item is effective only when connected via SSL/TLS (https). Only the administrator is allowed to display the pages.
*4
This item is displayed only when the optional hard disk is installed and is set to On for encryption. If not, Certificate Details is displayed.
IPsec
Purpose:
To specify the Security Architecture settings for Internet Protocol (IPsec) for encrypted communication to the
printer.
Values:
IPsec Settings
Protocol
Select the check box to enable the protocol.
IKE
Sets IKE authentication. Device Certificate is displayed on the list only
when an effective digital signature is set up.
Pre-Shared Key
Sets a shared key. Up to 255 alphanumeric characters, periods, and
hyphens can be used.
Re-enter Pre-Shared Key
*1
Enters the shared key again to confirm it.
Device Certificate
Displays the device certificate.
IKE SA Lifetime
Sets the lifetime for IKE SA from 5 to 28,800 minutes.
IPsec SA Lifetime
Sets the lifetime for IPsec SA from 5 to 2,880 minutes.
DH Group
Sets the DH group.
PFS
Select the check box to enable the PFS setting.
Remote peers IPv4 address Sets the IP address to connect to.
Remote peers IPv6 address Sets the IP address to connect to.
Non IPsec communication Allows communication with a device which does not support IPsec.
policy
*1
This item is effective only when the optional hard disk is installed and is set to On for encryption.
NOTE: If IPsec is enabled with incorrect settings, you must disable it using the IPsec menu on the operator panel.
166
Dell™ Printer Configuration Web Tool
802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
Configure 802.1x
Enable IEEE 802.1x
Select the check box to enable IEEE 802.1x authentication.
Authentication Method EAP-MD5
Selects the authentication method to use for IEEE
802.1x authentication.
EAP-MSCHAPv2
PEAP/MSCHAPv2
EAP-TLS*1, 2
Login Name: (Device
Name)
Sets the login name (device name) for IEEE 802.1x authentication using
up to 128 alphanumeric characters.
Password
Sets the login password for IEEE 802.1x authentication using up to 128
alphanumeric characters.
Re-enter Password
Confirms the set login password.
Certificate Validation
Select the check box to enable Certificate Validation.
*1
This item is displayed only when the optional hard disk is installed and is set to On for encryption.
*2
When this item is selected, Password and Re-enter Password need not to be specified.
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
Access List
Address
Sets the IP addresses that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Address Mask
Sets the subnet mask that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Active Mode
Reject
Rejects printing from specified network address.
Accept
Permits printing from specified network address.
Off
Disables the IP Filter feature for the specified IP address.
Copy Printer Settings
The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages.
Copy Printer Settings
Purpose:
To copy the printer settings to one or more of the same model of the printer.
To copy the settings to another printer, specify the IP address and password of the printer to which the settings are
copied in the IP Address text box and Password text box. Then, click the Copy the settings to the Host in the above
list button. Copying the settings is complete. The connection time-out period is 60 seconds. After that, you can
check whether the settings were copied to this page. And you need to check the Copy the settings to the Host in the
above list and reboot the printer menu of the Dell Printer Configuration Web Tool in the destination printer to
verify if the settings were actually copied or not.
Dell™ Printer Configuration Web Tool
167
If the settings can be copied but the printer configuration is different, the settings of only the same items are copied.
Printer settings are simultaneously copied to printers of up to 10 IP addresses.
Copy Printer Settings Report
Purpose:
To verify whether the printer setting is copied to other printers successfully.
NOTE: The history is cleared by turning off the printer.
Print Volume
The Printer Volume menu includes the Print Volume and Dell ColorTrack pages.
Print Volume
Purpose:
To verify the number of printed pages. This page can also be displayed by clicking Print Volume in the left frame.
Values:
Printer Page Count
Displays the total number of pages printed since the printer was shipped from the factory.
Paper Used
Displays the number of pages printed for each paper size.
Dell ColorTrack
Purpose:
To specify which users have access to color printing and to limit print volume per user.
Values:
ColorTrack Mode
Off
Enables to print the data with no authentication information.
Internal Mode
Restricts printing based on the print user information registered in the
internal server.
External Mode
Restricts printing based on the print user information registered in the
external server.
Non Registered User
Sets whether to permit the printing of data with no authentication information. To permit the
printing for non-account user, select the check box.
Non Registered User
Password*1
Sets the password to be used for non-account user using 1 to 127 alphanumeric characters. If the
password is left blank (NULL), you cannot log in to a server.
Re-enter Non Registered Enter the password again to confirm it.
User Password*1
ColorTrack Error Report Sets whether to automatically print error-related information if printing using ColorTrack results in an
error.
Auto Color To Mono
Print
Sets whether to print all print jobs in black and white even when color print is specified.
User Registration*2
Click Edit User Registration to display the Edit Print User Registration page.
• To register a user, click Create to open the Print User Settings page.
• To delete a user, click Delete to open the Delete User page.
Clicking Back returns the screen to the status prior to deleting the user.
• To confirm or change the registered user, click Confirm / Change to open the Print User Settings
page.
168
Dell™ Printer Configuration Web Tool
User Registration No.
Displays the user registration number. The Delete User button is displayed
when the user is already registered.
User Name
Sets the user name.
Password
Sets the user password using 4 to 12 alphanumeric characters.
Re-enter password
Enter the password again to confirm it.
Color Mode Limitation Sets whether to limit color printing.
Upper Limit for Color
Print
Sets the maximum number of pages allowed for color printing.
Cumulative Color Page Displays the cumulative number of pages printed for color printing.
Count
Upper Limit for
Monochrome Print
Sets the maximum number of pages allowed for monochrome printing.
Cumulative
Monochrome Page
Count
Displays the cumulative number of pages printed for monochrome printing.
Setup Remote
Authentication*3
Click to display the Authentication System page.
*1
The password must be set when External Mode is selected for ColorTrack Mode and Non Registered User is set to on.
*2
This item is displayed only when ColorTrack Mode is Internal Mode.
*3
This item is displayed only when ColorTrack Mode is External Mode.
Tray Settings
Use the Tray Settings menu to set the size and type of paper loaded in each paper source and specify which paper
source to use in what order.
Values:
MPF Mode
MPF Paper Size
Sets whether to use the printer driver settings for the size and type of paper loaded in the MPF.
*1
Sets the size of paper loaded in the MPF.
*1
Sets the type of paper loaded in the MPF.
MPF Paper Type
MPF Custom Paper
Size - Y*1
Sets the length of custom size paper loaded in the MPF.
MPF Custom Paper
Size - X*1
Sets the width of custom size paper loaded in the MPF.
MPF Display Popup*1
Sets whether to display a popup message that prompts the user to set the paper size and type when
the paper is loaded in the MPF.
Tray 1 Paper Size
Sets the size of paper loaded in tray1.
Tray 1 Paper Type
Sets the type of paper loaded in tray1.
Tray 1 Custom Paper
Size - Y
Sets the length of custom size paper loaded in tray1.
Tray 1 Custom Paper
Size - X
Sets the width of custom size paper loaded in tray1.
Tray 1 Display Popup
Sets whether to display a popup message that prompts the user to set the paper size and type when
the paper is loaded in tray1.
Tray 2 Paper Size*2
Sets the size of paper loaded in the optional 550-sheet feeder.
Tray 2 Paper Type
*2
Sets the type of paper loaded in the optional 550-sheet feeder.
Dell™ Printer Configuration Web Tool
169
Tray 2 Custom Paper
Size - Y*2
Sets the length of custom size paper loaded in the optional 550-sheet feeder.
Tray 2 Custom Paper
Size - X*2
Sets the width of custom size paper loaded in the optional 550-sheet feeder.
Tray 2 Display Popup*2 Sets whether to display a popup message that prompts the user to set the paper size and type when
the paper is loaded in the optional 550-sheet feeder.
1st Priority
Sets the paper source to be used as the first priority.
2nd Priority
3rd Priority
170
*2
Sets the paper source to be used as the second priority.
Sets the paper source to be used as the third priority.
*1
This item is available only when Panel Specified in MPF Mode is selected.
*2
This item is available only when the optional 550-sheet feeder is installed.
Dell™ Printer Configuration Web Tool
15
Understanding the Tool Box Menus
The Tool Box allows you to view, specify, and diagnose the system settings.
NOTE: A Password dialog box appears the first time you try to change settings on Tool Box when Panel Lock is set on the
printer. In this case, input the password that you have already specified, and click OK to apply the settings.
Starting the Tool Box
1 Click Start→ All Programs→ Dell Printers→ Dell C3760 Color Laser Printer→ Tool Box.
The screen to select the printer appears.
2 Click Network Connection or USB Connection, and then select the printer listed in Select From the Found
Printers.
NOTE: If the printer is not listed in Select From the Found Printers when you click Network Connection, click Directly Input
IP Address/Host Name and enter the IP address of the printer. For details about how to verify the IP address of the printer,
see "Verifying the IP Settings."
NOTE: On Microsoft® Windows® XP or Windows Server® 2003, printers using IPv6 addresses cannot be detected.
3 Click OK.
The Tool Box opens.
The Tool Box consists of the Printer Setting Reports, Printer Maintenance, and Diagnosis tabs.
Printer Setting Reports
The Printer Setting Reports tab includes the Printer Information, Menu Settings, Reports, TCP/IP Settings, Tray
Settings, Panel Language, and USB Direct Print Defaults pages.
Printer Information
Purpose:
To display the system information of the printer.
Values:
Dell Service Tag Number
Displays the service tag number of your printer.
Express Service Code
Displays the express service code number.
Printer Serial Number
Displays the serial number of your printer.
Printer Type
Displays the type of printing for the printer. Color Laser is displayed normally.
Asset Tag Number
Displays the asset tag number of your printer.
Memory Capacity
Displays the memory capacity.
Processor Speed
Displays the processing speed.
Firmware Version
Displays the version of the controller.
Network Firmware Version
Displays the NIC version.
MCU Firmware Version
Displays the version of the Machine Control Unit (MCU) firmware.
Color Printing Speed
Displays the speed for color printing.
Monochrome Printing Speed
Displays the speed for monochrome printing.
Understanding the Tool Box Menus
171
Menu Settings
Purpose:
To display the menu settings of the printer.
Values:
System Settings
Power Saver Timer - Sleep
Displays the amount of transition time to the Sleep mode
after the printer finishes a job.
Power Saver Timer - Deep Sleep
Displays the amount of transition time between the Sleep
mode and the Deep Sleep mode.
Power Saver Timer - Auto-Off Timer*1
Displays the time it takes to automatically turn off the
printer after the printer has entered the Deep Sleep mode.
Auto Reset
Displays the amount of time before the printer
automatically resets the settings on the operator panel to
the defaults when no additional settings are made.
Fault Time-out
Displays the amount of time the printer waits before
canceling a job that stops abnormally.
Job Time-out
Displays the amount of time the printer waits for data to
arrive from the computer.
mm / inch
Displays the measurement unit used on the operator
panel.
Default Paper Size
Displays the default paper size.
Enable A4<>Letter Switch
Displays whether to print A4 size jobs on Letter size paper
if A4 is not available in the paper trays and vice versa
(Letter size job on A4 size paper).
Auto Log Print
Displays whether to automatically print a job history
report after every 20 jobs.
Report 2 Sided Print*2
Displays whether to print reports on both sides of a sheet
of paper.
Print ID
Displays where to print a user ID on the output paper.
Print Text
Displays whether the printer outputs PDL (Page
Description Language) data (which is not supported by
the printer) as text when the printer receives it.
Banner Sheet Insert Position*2
Banner Sheet Specify Tray
172
*2
Displays where to insert the banner sheet.
Displays the banner sheet tray.
RAM Disk*3
Displays whether to allocate RAM for the disk file system
for the Secure Print, Private Mail Box Print, Public Mail
Box Print, and Proof Print features.
Substitute Tray
Displays an indication to use paper of a different size
when the paper that is loaded in the specified tray does
not match the paper size settings for the current job.
Letterhead 2 Sided*2
Displays whether to print on both sides of a sheet of
letterhead paper.
Low Toner Alert Message
Displays whether to show the alert message when the
toner is low.
Use Another Tray
Displays whether to show a message to select another tray
when the specified paper is not available in the paper tray.
Understanding the Tool Box Menus
Date & Time
Time Zone
Displays the selected time zone.
Set Date
Displays the date setting.
Set Time
Displays the time setting.
Date Format
Displays the selected date format.
Time Format
Displays the selected time format; 24 Hour or 12 Hour.
Control Panel Tone
Displays whether to emit a tone when the operator panel
input is correct. Off indicates that the tone is disabled.
Invalid Key Tone
Displays whether to emit a tone when the operator panel
input is incorrect. Off indicates that the tone is disabled.
Machine Ready Tone
Displays whether to emit a tone when the printer becomes
ready. Off indicates that the tone is disabled.
Job Completed Tone
Displays whether to emit a tone when a print job is
complete. Off indicates that the tone is disabled.
Fault Tone
Displays whether to emit a tone when a job ends
abnormally. Off indicates that the tone is disabled.
Alert Tone
Displays whether to emit a tone when a problem occurs.
Off indicates that the tone is disabled.
Out of Paper Alert Tone
Displays whether to emit a tone when the printer runs out
of paper. Off indicates that the tone is disabled.
Low Toner Alert Tone
Displays whether to emit a tone when the toner is low. Off
indicates that the tone is disabled.
Auto Clear Alert Tone
Displays whether to emit a tone 5 seconds before the
printer performs auto clear. Off indicates that the tone is
disabled.
Plain
Displays the plain paper density settings.
Label
Displays the label paper density settings.
Auto Registration
Adjustment
Auto Registration Adjustment
Displays whether to automatically adjust color
registration.
Non-Dell Toner
Non-Dell Toner
Displays whether to use toner cartridge of another
manufacturer.
Adjust Altitude
Adjust Altitude
Displays the altitude of the location where the printer is
installed.
Audio Tone
Paper Density
*1
Auto-Off Timer feature is available only in certain regions.
*2
This item is available only for Dell™ C3760dn Color Laser Printer.
*3
This item is available only when the optional 512MB memory module is installed, and also when the optional hard disk is not installed.
Reports
Purpose:
To print the settings and history information of the printer.
The reports are printed in the paper size specified in system settings.
Values:
Printer Settings
Click this button to print a detailed list of the printer settings.
Panel Settings
Click this button to print a detailed list of the panel settings.
PCL Fonts List
Click this button to print a list of the PCL (Hewlett-Packard Printer Control Language) fonts.
PCL Macros List
Click this button to print a list of the PCL Macro.
Understanding the Tool Box Menus
173
PS Fonts List
Click this button to print a list of the PS fonts.
PDF Fonts List
Click this button to print a list of the PDF fonts.
Job History
Click this button to print the Completed Jobs history of the printer.
Error History
Click this button to print the error history of the printer.
Print Meter
Click this button to print the report for the total number of pages printed.
Color Test Page
Click this button to print a color test page.
*1
Stored Documents
*1
Click this button to print a list of the Stored Documents.
You can print the list only when the RAM disk is enabled or the optional hard disk is installed.
TCP/IP Settings
Purpose:
To display the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol).
Values:
IPv4
IPv6
IP Address Mode
Displays the method for acquiring the IP address.
IP Address
Displays the IP address of the printer.
Subnet Mask
Displays the subnet mask.
Gateway Address
Displays the gateway address.
Use Manual Address
Displays whether to set the IP address manually.
Manual Address
Displays the IP address of the printer.
Link Local Address
Displays the link local address.
Tray Settings
Purpose:
To display the tray settings of the printer.
Values:
Tray Settings
MPF Mode
Displays whether the paper size and paper type for the multipurpose feeder
(MPF) are specified from the printer driver or the operator panel.
MPF Display Popup
Displays a popup menu that prompts to set the paper size and type when
paper is loaded in the MPF.
MPF Paper Size
Displays the paper size setting of the MPF.
MPF Custom Size - Y
Displays the length of custom size paper loaded in the MPF.
MPF Custom Size - X
Displays the width of custom size paper loaded in the MPF.
MPF Paper Type
Displays the paper type setting of the MPF.
Tray 1 Display Popup
Displays a popup menu that prompts to set the paper size and type when
paper is loaded in tray1.
Tray 1 Paper Size
Displays the paper size setting of tray1.
Tray 1 Custom Size - Y
Displays the length of custom size paper loaded in tray1.
Tray 1 Custom Size - X
Displays the width of custom size paper loaded in tray1.
Tray 1 Paper Type
Displays the paper type setting of tray1.
*1
Tray 2 Display Popup
174
Understanding the Tool Box Menus
Displays a popup menu that prompts to set the paper size and type when
paper is loaded in the optional 550-sheet feeder (tray2).
Tray 2 Paper Size*1
Displays the paper size setting of the optional 550-sheet feeder.
*1
Tray 2 Custom Size - Y
Displays the length of custom size paper loaded in the optional 550-sheet
feeder.
Tray 2 Custom Size - X*1 Displays the width of custom size paper loaded in the optional 550-sheet
feeder.
Tray Priority
*1
Tray 2 Paper Type*1
Displays the paper type setting of the optional 550-sheet feeder.
Tray Priority
Displays the priority order of the paper trays.
This item is available only when the optional 550-sheet feeder is installed.
Panel Language
Purpose:
To display the panel language setting of the printer.
Values:
Panel Language
Displays the language that is used on the LCD panel.
USB Direct Print Defaults
Purpose:
To display the default settings for the USB Direct Print function of the printer.
Values:
Output Color
Displays the default color mode.
Select Tray
Displays the default tray.
*1
2 Sided Printing
Displays whether to print on both sides of a sheet of paper.
Multiple-Up
Displays the default paper layout when Multiple-Up is selected.
Collation
Displays whether to sort the print job.
*1
This item is available only for Dell C3760dn Color Laser Printer.
Understanding the Tool Box Menus
175
Printer Maintenance
The Printer Maintenance tab includes the System Settings, Maintenance, Tray Settings, Panel Language, TCP/IP
Settings, Network Settings, and USB Direct Print Defaults pages.
System Settings
Purpose:
To configure the power management of the printer, auto clear time, alarm tones, time-out time, date and time,
mm/inch setting, job log auto print, Print ID, setting of the additional memory, and setting of the substitute tray.
Values:
Power Saver Timer
Sleep*1
Available Range:
1–60 minutes
Sets the amount of transition time to the Sleep mode
after the printer finishes a job.
Deep Sleep*1
Available Range:
1–60 minutes
Sets the amount of transition time between the Sleep
mode and the Deep Sleep mode.
Auto-Off Timer*2 0
Available Range:
60–1440 minutes
Auto Reset
45 seconds
Sets the time it takes to automatically turn off the printer
after the printer has entered the Deep Sleep mode.
Sets the amount of time before the printer automatically
resets the settings on the operator panel to the defaults
when no additional settings are made.
1 minute
2 minutes
3 minutes
4 minutes
Fault Time-out
0
Available Range: 3–300 seconds
Job Time-out
Date & Time
0
Available Range: 5–300 seconds
Sets the amount of time the printer waits for additional
data from the computer before it cancels the job.
Time Zone
Sets the time zone.
Set Date
Sets the date.
Set Time
Sets the time. You can select AM or PM when Time
Format is set to 12 Hour.
Date Format
Sets the date format.
Time Format
Audio Tone
Control Panel
Tone
Sets the time format in 24 Hour or 12 Hour.
Off
Does not emit a tone when the operator panel input is
correct.
On
Emits a tone when the operator panel input is correct.
Off
Does not emit a tone when the operator panel input is
incorrect.
On
Emits a tone when the operator panel input is incorrect.
Machine Ready
Tone
Off
Does not emit a tone when the printer becomes ready.
On
Emits a tone when the printer becomes ready.
Job Completed
Tone
Off
Does not emit a tone when a print job is complete.
On
Emits a tone when a print job is complete.
Fault Tone
Off
Does not emit a tone when a job ends abnormally.
On
Emits a tone when a job ends abnormally.
Invalid Key Tone
176
Sets the amount of time the printer waits before canceling
a job when the job stops abnormally.
Understanding the Tool Box Menus
Alert Tone
mm / inch
Default Paper Size
Off
Does not emit a tone when a problem occurs.
On
Emits a tone when a problem occurs.
Out of Paper Alert Off
Tone
On
Does not emit a tone when the printer runs out of paper.
Low Toner Alert
Tone
Off
Does not emit a tone when the toner is low.
On
Emits a tone when the toner is low.
Auto Clear Alert
Tone
Off
Does not emit a tone before the printer performs auto
clear.
On
Emits a tone 5 seconds before the printer performs auto
clear.
Millimeters(mm)
Emits a tone when the printer runs out of paper.
Inches(")
Selects millimeter or inch as the default measurement
unit.
A4 (210x297mm)
Sets the default paper size.
Letter (8.5x11")
Enable A4<>Letter
Switch
Auto Log Print
Report 2 Sided Print*3
Print ID
On
Prints A4 size jobs on Letter size paper if A4 is not
available in the paper trays and vice versa (Letter size job
on A4 size paper).
Off
Does not print A4 size jobs on Letter size paper or Letter
size jobs on A4 paper.
Off
Does not automatically print a job history report after
every 20 jobs.
On
Automatically prints a job history report after every 20
jobs.
1 Sided
Prints reports on one side of a sheet of paper.
2 Sided
Prints reports on both sides of a sheet of paper.
Off
Does not print the user ID.
Top Left
Prints the user ID on the specified location.
Top Right
Bottom Left
Bottom Right
Print Text
Banner Sheet Insert
Position*3
Off
Does not print the received PDL data as text data.
On
Prints the received PDL data as text data.
Off
Does not insert the banner sheet.
Front
Sets where to insert the banner sheet.
Back
Front & Back
Banner Sheet Specify
Tray*3
MPF
Sets the tray for the banner sheet.
Tray 1
Tray 2*4
RAM
Disk*5
Off
Does not allocate RAM for the disk file system. Secure
Print, Private Mail Box Print, Public Mail Box Print, and
Proof Print jobs will abort and be recorded to the job log.
Available Range: 50–450MBytes
Allocates RAM for the disk file system automatically.
(in 50 MB increments)
Understanding the Tool Box Menus
177
Substitute Tray
*3
Letterhead 2 Sided
Low Toner Alert Message
Use Another Tray
Off
No tray size substitute accepted.
Larger Size
Substitutes paper of next largest size. When there is no
larger paper size, the printer substitutes paper of nearest
size.
Nearest Size
Substitutes paper of nearest size.
Use MPF
Substitutes paper from the MPF.
Disable
Does not print on both sides of a sheet of letterhead paper.
Enable
Prints on both sides of a sheet of letterhead paper.
On
Shows the alert message when the toner is low.
Off
Does not show the alert message when the toner is low.
On
Sets to show a message to select another tray when the
specified paper is not available in the paper tray.
Off
Does not print on other paper sizes in other paper trays if
the paper size specified in the job is not available.
Apply New Settings
After you change the settings, click this button to apply
the changes.
Restart printer to apply new settings
Click this button to apply the changes.
*1
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This uses much less energy,
but requires more warm-up time for the printer. Specify 1 minute if your printer shares an electrical circuit with room lighting and you
notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate with minimum
warm-up time.
Select a value between 1 and 60 minutes for the power saver mode if you want a balance between energy consumption and a shorter
warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer. You can
also return the printer to the standby mode by pressing the
178
(Power Saver) button on the operator panel.
*2
Auto-Off Timer feature is available only in certain regions.
*3
This item is available only for Dell C3760dn Color Laser Printer.
*4
This item is available only when the optional 550-sheet feeder is installed.
*5
This item is available only when the optional 512MB memory module is installed, and also when the optional hard disk is not installed.
Understanding the Tool Box Menus
Maintenance
CAUTION: Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Purpose:
To configure the paper density, the color registration adjustments, the initialization of the printer, and other
settings.
Values:
Paper Density
Plain
Light
Sets plain paper density.
Normal
Label
Light
Sets label paper density.
Normal
Color
Registration
Adjustments
Auto Correct
Click Start to perform color registration
automatically.
Print Color Regi Chart
Click Start to print a color registration chart.
Registration
Adjustments
LY(Left Yellow)
Available Range:
-9 to +9
LM(Left
Magenta)
Available Range:
-9 to +9
LC(Left Cyan)
Available Range:
-9 to +9
RY(Right
Yellow)
Available Range:
-9 to +9
RM(Right
Magenta)
Available Range:
-9 to +9
Sets lateral (perpendicular to paper feed
direction) and process (paper feed direction) color
adjustment values that are found in the color
registration chart individually for Yellow, Magenta,
and Cyan.
RC(Right Cyan) Available Range:
-9 to +9
PY(Process
Yellow)
Available Range:
-9 to +9
PM(Process
Magenta)
Available Range:
-9 to +9
PC(Process
Cyan)
Available Range:
-9 to +9
Reset Defaults
Initializes the system parameters.
Initialize Print Meter
Click Initialize Print Meter to initialize the Print
Meter.
Non-Dell Toner
Off
Disables the use of another manufacturer's toner
cartridge.
On
Enables the use of another manufacturer's toner
cartridge.
0 meter
Sets the altitude of the location where the printer
is installed.
Adjust Altitude
1000 meters
2000 meters
3000 meters
Apply New Settings
After you change the settings, click this button to
apply the changes.
Understanding the Tool Box Menus
179
Restart printer to apply new settings
Click this button to apply the changes.
Tray Settings
Purpose:
To specify the paper types and sizes, and the tray priority for the MPF, tray1, and the optional 550-sheet feeder
respectively.
Values:
Tray Settings MPF Mode
Panel Specified
Driver Specified
Sets whether the paper size and paper type for the
MPF are specified from the printer driver or the
operator panel.
MPF Display
Popup*1
On
Off
Displays a popup message that prompts the user to
set Paper Type and Paper Size when the paper is
loaded in the MPF.
MPF Paper Size*1
Use Driver Settings
Sets the size of paper loaded in the MPF.
A4 (210x297mm)
A5 (148x210mm)
B5 (182x257mm)
Letter (8.5x11")
Folio (8.5x13")
Legal (8.5x14")
Executive (7.3x10.5")
Envelope #10 (4.1x9.5")
Monarch Env. (3.9x7.5")
DL Env. (110x220mm)
C5 Env. (162x229mm)
Custom Size
MPF Custom Size - Available Range:
127–355 mm (5.0–14.0 inches)
Y*1
Sets the length of custom size paper loaded in the
MPF.
MPF Custom Size - Available Range:
77–215 mm (3.0–8.5 inches)
X*1
Sets the width of custom size paper loaded in the
MPF.
MPF Paper Type*1
Sets the type of paper loaded in the MPF.
Plain
Plain Thick
Covers(106–163g/m2)
Covers Thick(164–216g/m2)
Coated(106–163g/m2)
Coated Thick(164–216g/m2)
Label
Envelope
Recycled
Letterhead
Preprinted
Prepunched
Color
180
Understanding the Tool Box Menus
Plain - Side 2
Color - Side 2
Plain Thick - Side 2
Recycled - Side 2
Tray 1 Display
Popup
On
Off
Displays a popup message that prompts the user to
set Paper Type and Paper Size when the paper is
loaded in tray1.
Tray 1 Paper Size
A4 (210x297mm)
Sets the size of paper loaded in tray1.
A5 (148x210mm)
B5 (182x257mm)
Letter (8.5x11")
Folio (8.5x13")
Legal (8.5x14")
Executive (7.3x10.5")
Custom Size
Tray 1 Custom Size - Available Range:
Y
210–355 mm (8.3–14.0 inches)
Sets the length of custom size paper loaded in tray1.
Tray 1 Custom Size - Available Range:
X
148–215 mm (5.8–8.5 inches)
Sets the width of custom size paper loaded in tray1.
Tray 1 Paper Type
Sets the type of paper loaded in tray1.
Plain
Plain Thick
Covers(106–163g/m2)
Covers Thick(164–216g/m2)
Coated(106–163g/m2)
Coated Thick(164–216g/m2)
Recycled
Letterhead
Preprinted
Prepunched
Color
Plain - Side 2
Color - Side 2
Plain Thick - Side 2
Recycled - Side 2
Tray 2 Display
Popup*2
On
Tray 2 Paper Size*2
Auto
Off
Custom Size
Displays a popup message that prompts the user to
set Paper Type and Paper Size when the paper is
loaded in the optional 550-sheet feeder.
Sets the size of paper loaded in the optional 550sheet feeder.
Tray 2 Custom Size - Available Range:
210–355 mm (8.3–14.0 inches)
Y*2
Sets the length of custom size paper loaded in the
optional 550-sheet feeder.
Tray 2 Custom Size - Available Range:
148–215 mm (5.8–8.5 inches)
X*2
Sets the width of custom size paper loaded in the
optional 550-sheet feeder.
Understanding the Tool Box Menus
181
Tray 2 Paper Type*2
Plain
Plain Thick
Sets the type of paper loaded in the optional 550sheet feeder.
Covers(106–163g/m2)
Covers Thick(164–216g/m2)
Coated(106–163g/m2)
Coated Thick(164–216g/m2)
Recycled
Letterhead
Preprinted
Prepunched
Color
Plain - Side 2
Color - Side 2
Plain Thick - Side 2
Recycled - Side 2
Tray Priority
MPF->Tray1
Sets the priority order of the paper trays.
Tray1->MPF
MPF->Tray1->Tray2*2
MPF->Tray2*2->Tray1
Tray1->MPF->Tray2*2
Tray1->Tray2*2->MPF
Tray2*2->MPF->Tray1
Tray2*2->Tray1->MPF
Apply New Settings
After you change the settings, click this button to
apply the changes.
Restart printer to apply new settings
Click this button to restart the printer and apply the
changes.
*1
This item is available only when MPF Mode is set to Panel Specified.
*2
This item is available only when the optional 550-sheet feeder is installed.
NOTE: For details about the paper density for paper types, see "Paper Type Specifications."
182
Understanding the Tool Box Menus
Panel Language
Purpose:
To determine the language of the text on the LCD panel.
Values:
Panel Language
English
Sets the language to be used on the LCD panel.
French
Italian
German
Spanish
Danish
Dutch
Norwegian
Swedish
Apply New Settings
After you change the settings, click this button to apply the changes.
Restart printer to apply new settings
Click this button to apply the changes.
TCP/IP Settings
NOTE: TCP/IP Settings is not available when IP Mode of the printer is is set to IPv6 Mode.
Purpose:
To configure TCP/IP settings.
Values:
IP Address Mode
AutoIP
Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not
currently in use on the network is set as the IP address. The subnet mask is set as
255.255.0.0.
IP Address
BOOTP
Sets the IP address using BOOTP.
RARP
Sets the IP address using RARP.
DHCP
Sets the IP address using DHCP.
Panel
Manually sets the IP address.
Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in
the range of 224 to 254 cannot be specified for the first octet of a gateway address.
Subnet Mask
Manually sets the subnet mask.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 255. 255.255.255.255 cannot be
specified as the subnet mask.
Gateway Address
Manually sets the gateway address.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range
of 224 to 254 cannot be specified for the first octet of a gateway address.
Apply New Settings
After you change the settings, click this button to apply the changes.
Understanding the Tool Box Menus
183
Restart printer to apply new settings
Click this button to restart the printer and apply the changes.
Network Settings
NOTE: Network Settings is not available when the printer is connected using a USB cable.
Purpose:
To configure the setup of the printer using your web browser.
Values:
Print Server
Settings*1
Display
Display of Dell
Configuration Web
Tool
Click to display the Print Server Setup page on the Dell Printer Configuration
Web Tool.
Off
Does not display the server settings for the Dell Printer Configuration Web Tool.
On
Displays the server settings for the Dell Printer Configuration Web Tool.
Apply New Settings
After you change the settings, click this button to apply the changes.
Restart printer to apply new settings
Click this button to restart the printer and apply the changes.
*1
This item is available only when Display of Dell Configuration Web Tool is set to On.
USB Direct Print Defaults
Purpose:
To create your own settings for USB Direct Print Defaults.
Values:
Output Color
Select Tray
Full Color
Prints in color mode.
Black & White
Prints in black and white mode.
MPF
The paper is fed from the MPF.
Tray 1
Tray 2
*2
2 Sided Printing
The paper is fed from tray1.
*1
The paper is fed from the optional 550-sheet feeder.
1 -> 1 Sided
Prints on one side of a sheet of paper.
Long Edge Binding
Prints on both sides of a sheet of paper to be bound by long edge.
Short Edge Binding Prints on both sides of a sheet of paper to be bound by short edge.
Multiple-Up
Collation
Off
Prints one page on one side of a sheet of paper.
2-Up
Prints two pages on one side of a sheet of paper.
4-Up
Prints four pages on one side of a sheet of paper.
Collated
Sorts the print job.
Uncollated
Does not sort the print job.
Apply New Settings
After you change the settings, click this button to apply the changes.
Restart printer to apply new settings
Click this button to restart the printer and apply the changes.
*1 This item is available only when the optional 550-sheet feeder is installed.
*2
184
This item is available only for Dell C3760dn Color Laser Printer.
Understanding the Tool Box Menus
Diagnosis
The Diagnosis tab includes the Chart Print and Environment Sensor Info pages.
Chart Print
Purpose:
To print various charts that can be used for diagnosis of the printer. The chart is printed to A4 or letter size paper.
Values:
Pitch Configuration Chart
Prints full halftone pages for yellow, magenta, cyan, and black. Also prints pages to
check the pitch. A total of five pages are output.
Ghost Configuration Chart
Prints a chart to check for ghost printing. One page is printed.
4 Colors Configuration Chart
Bands of yellow, magenta, cyan, and black are printed with varying density. One
page is printed.
Banding Detection Chart
Prints charts to check which color the banding occurred and the distance between
each band.
MQ Chart
Prints charts to check for the banding in A4 or Letter.
Alignment Chart
Prints a chart to check for proper alignment of the print image on the paper. One
page is printed.
Environment Sensor Info
Purpose:
To print the internal environment sensor information of the printer to Result.
Values:
Get Environment Sensor
Info
Click this button to confirm the internal environment sensor information of the printer such as
temperature and humidity.
Resetting Defaults
After executing this function and rebooting the printer, the menu parameters are reset to their default values.
The following menu parameters are exceptions and are not reset.
•
Network settings
•
Panel Lock settings and password
•
Function Enabled settings and passwords
•
Login Error settings
•
Set Available Time settings
•
Secure Job Expiration settings
•
USB Port settings
•
Data Encryption settings
•
Hard Disk Over write settings
•
ColorTrack Mode settings
•
ColorTrack Error Report settings
•
Non Registered User settings
Understanding the Tool Box Menus
185
When Using the Tool Box
1 Click Start→ All Programs→ Dell Printers→ Dell C3760 Color Laser Printer→ Tool Box.
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Maintenance from the list at the left side of the page.
The Maintenance page appears.
4 Click Reset Default.
The printer restarts automatically to apply the settings.
186
Understanding the Tool Box Menus
16
Understanding the Printer Menus
When your printer is connected to a network and available to a number of users, the access to the Admin
Settings can be limited. This prevents other users from using the operator panel to inadvertently change a user
default that has been set by the administrator.
However, you can use your printer driver to override user defaults and select settings for individual print jobs.
Report / List
Use the Report/List menu to print various types of reports and lists.
Printer Settings
Purpose:
To print a list of the current user default values, the installed options, the amount of installed print memory, and the
status of printer supplies.
Panel Settings
Purpose:
To print a detailed list of all the settings of the printer menus.
PCL Fonts List
Purpose:
To print a sample of the available PCL fonts.
See also:
"Understanding Fonts"
PCL Macros List
Purpose:
To print the information on the downloaded PCL macro.
PS Fonts List
Purpose:
To print a sample of the available PS fonts.
See also:
"Understanding Fonts"
PDF Fonts List
Purpose:
To print a sample of the available PDF fonts.
Job History
Purpose:
To print a detailed list of the print jobs that have been processed. This list contains the last 20 jobs.
Understanding the Printer Menus
187
Error History
Purpose:
To print a detailed list of paper jams and fatal errors.
Print Meter
Purpose:
To print the reports for the total number of pages printed.
Color Test Page
Purpose:
To print a page for testing colors.
Stored Documents
NOTE: Stored Documents feature is available only when the optional 512 MB memory module is installed on the printer and
RAM Disk under System Settings is enabled or the optional hard disk is installed.
Purpose:
To print a list of all files stored for Secure Print, Private Mail Box Print, Public Mail Box Print, and Proof Print in the
RAM disk or the optional hard disk is installed.
Printing a Report/List Using the Operator Panel
1 Press the
(Menu) button.
2 Press the
button until Report/List is highlighted, and then press the
3 Press the
button until the desired report or list is highlighted, and then press the
(Set) button.
(Set) button.
The selected report or list is printed.
Printing a Report/List Using the Tool Box
1 Click Start→ All Programs→ Dell Printers→ Dell C3760 Color Laser Printer→ Tool Box.
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Ensure that the Printer Setting Reports tab is open.
3 Select Reports from the list at the left side of the page.
The Reports page appears.
4 Click the button for the desired report or list.
The report or list is printed.
Admin Settings
Use the Admin Settings menu to configure a variety of printer features.
PCL
Use the PCL menu to change printer settings that only affect jobs using the PCL emulation printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
188
Understanding the Printer Menus
Paper Tray
Purpose:
To specify the default paper tray.
Values:
Auto*
MPF
Tray1
Tray2*1
*1
This item is available only when the optional 550-sheet
feeder is installed.
Paper Size
Purpose:
To specify the default paper size.
Values:
mm series
A4*1
A5
B5
Letter
Executive
Folio
Legal
Envelope #10
Monarch
DL
C5
Custom Size
*1
Denotes country-specific factory default value.
inch series
Letter*1
Executive
Folio
Legal
A4
A5
B5
Envelope #10
Monarch
Understanding the Printer Menus
189
DL
C5
Custom Size
*1
Denotes country-specific factory default value.
NOTE: Selecting a custom size for the paper size prompts you to enter a custom length and width.
Orientation
Purpose:
To specify how text and graphics are oriented on the page.
Values:
Portrait*
Prints text and graphics parallel to the short edge of the paper.
Landscape
Prints text and graphics parallel to the long edge of the paper.
2 Sided
NOTE: 2 Sided feature is available only for Dell C3760dn Color Laser Printer.
Purpose:
To specify whether to print on both sides of a sheet of paper.
Values:
2 Sided Print
Off*
Does not print on both sides of a sheet of paper.
On
Binding Edge
Prints on both sides of a sheet of paper.
*
Flip on Long Edge
Prints on both sides of a sheet of paper to be bound by long edge.
Flip on Short Edge
Prints on both sides of a sheet of paper to be bound by short edge.
Font
Purpose:
To specify the default font from the fonts registered in the printer.
Values:
CG Times
LetterGothic
CourierPS
CG Times It
LetterGothic It
CourierPS Ob
CG Times Bd
LetterGothic Bd
CourierPS Bd
CG Times BdIt
Albertus Md
CourierPS BdOb
Univers Md
Albertus XBd
SymbolPS
Univers MdIt
Clarendon Cd
Palatino Roman
Univers Bd
Coronet
Palatino It
Univers BdIt
Marigold
Palatino Bd
Univers MdCd
Arial
Palatino BdIt
Univers MdCdIt
Arial It
ITCBookman Lt
Univers BdCd
Arial Bd
ITCBookman LtIt
Univers BdCdIt
Arial BdIt
ITCBookmanDm
190
Understanding the Printer Menus
AntiqueOlv
Times New
ITCBookmanDm It
AntiqueOlv It
Times New It
HelveticaNr
AntiqueOlv Bd
Times New Bd
HelveticaNr Ob
CG Omega
Times New BdIt
HelveticaNr Bd
CG Omega It
Symbol
HelveticaNrBdOb
CG Omega Bd
Wingdings
N C Schbk Roman
CG Omega BdIt
Line Printer
N C Schbk It
GaramondAntiqua
Times Roman
N C Schbk Bd
Garamond Krsv
Times It
N C Schbk BdIt
Garamond Hlb
Times Bd
ITC A G Go Bk
GaramondKrsvHlb
Times BdIt
ITC A G Go BkOb
Courier*
Helvetica
ITC A G Go Dm
Courier It
Helvetica Ob
ITC A G Go DmOb
Courier Bd
Helvetica Bd
ZapfC MdIt
Courier BdIt
Helvetica BdOb
ZapfDingbats
Symbol Set
Purpose:
To specify a symbol set for a specified font.
Values:
ROMAN-8*
WIN L1
ISO-6
ISO L1
WIN L2
ISO-11
ISO L2
WIN L5
ISO-15
ISO L5
DESKTOP
ISO-17
ISO L6
PS TEXT
ISO-21
PC-8
MC TEXT
ISO-60
PC-8 DN
MS PUB
ISO-69
PC-775
MATH-8
WIN 3.0
PC-850
PS MATH
WINBALT
PC-852
PI FONT
SYMBOL
PC-1004
LEGAL
WINGDINGS
PC-8 TK
ISO-4
DNGBTSMS
Font Size
Purpose:
To specify the font size for scalable typographic fonts.
Values:
12.00*
Sets the values in increments of 0.25.
Available Range: 4.00 – 50.00
Font size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
Understanding the Printer Menus
191
NOTE: The Font Size menu is only displayed for typographic fonts.
See also:
"Pitch and Point Size"
Font Pitch
Purpose:
To specify the font pitch for scalable mono spaced fonts.
Values:
10.00*
Sets the value in increments of 0.01.
Available Range: 6.00–24.00
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For non-scalable mono spaced
fonts, the pitch is displayed, but cannot be changed.
NOTE: The Font Pitch menu is only displayed for fixed or mono spaced fonts.
See also:
"Pitch and Point Size"
Form Line
Purpose:
To set the number of lines in a page.
Values:
mm series
64 mm*1
Sets the value in increments of 1 mm.
Available Range: 5–128 mm
*1
Denotes country-specific factory default values.
inch series
60 inches*1
Sets the value in increments of 1 inch.
Available Range: 5–128 inches
*1
Denotes country-specific factory default values.
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and
Orientation menu items. Select the correct Form Line and Orientation before changing Form Line.
See also:
"Orientation"
Quantity
Purpose:
To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values
selected from the printer driver always override values selected from the operator panel.)
192
Understanding the Printer Menus
Values:
1*
Sets the value in increments of 1.
Available Range: 1–999
Image Enhance
Purpose:
To specify whether to enable the Image Enhance feature, which makes the boundary line between black and white
smoother to decrease jagged edges and enhance the visual appearance.
Values:
Off
*
On
Disables the Image Enhance feature.
Enables the Image Enhance feature.
Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Values:
Disable*
Disables the Hex Dump feature.
Enable
Enables the Hex Dump feature.
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Values:
Disable*
Does not print in the draft mode.
Enable
Prints in the draft mode.
LineTermination
Purpose:
To add the line termination commands.
Values:
Off*
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Understanding the Printer Menus
193
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job that does not specify a print mode.
Values:
Black*
Prints in the black and white mode.
Color
Prints in the color mode.
Ignore FormFeed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
Off*
Disables the Ignore Form Feed feature.
On
Enables the Ignore Form Feed feature.
PDF
Use the PDF menu to change printer settings that only affect the PDF jobs.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Quantity
Purpose:
To specify the number of copies to print.
Values:
1*
Sets the value in increments of 1.
Available Range: 1–999
2 Sided Print
NOTE: 2 Sided Print feature is available only for Dell C3760dn Color Laser Printer.
Purpose:
To specify whether to print on both sides of a sheet of paper.
Value:
1 Sided*
Prints on one side of a sheet of paper.
Flip on Long Edge
Prints on both sides of a sheet of paper to be bound by long edge.
Flip on Short Edge
Prints on both sides of a sheet of paper to be bound by short edge.
Print Mode
Purpose:
To specify the print mode.
194
Understanding the Printer Menus
Value:
Normal*
For documents with normal sized characters.
High Quality
For documents with small characters or thin lines, or documents printed using a dot-matrix printer.
High Speed
Prints with the higher speed than the Normal mode, but the quality is less.
PDF Password
Purpose:
To specify the password to print the secure PDF.
Value:
Enter PDF Password
Enter the password to print the secure PDF.
Collation
Purpose:
To specify whether to sort the job.
Value:
Collated
Sorts the job.
Uncollated*
Does not sort the job.
Output Size
Purpose:
To specify the output paper size for PDF.
Value:
A4*1
Letter*1
Auto
*1
The default paper size is displayed.
Layout
Purpose:
To specify the output layout.
Value:
Auto %*
100% (No Zoom)
Booklet
2 Pages Up
4 Pages Up
Understanding the Printer Menus
195
Default Color
Purpose:
To specify the output color.
Value:
Color (Auto)*
Black
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer
language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the printer outputs error contents for a PostScript error.
The change becomes effective after the printer is turned off and then on
again.
Values:
Off
Discards the print job without printing an error message.
On*
Prints an error message before it discards the job.
NOTE: Instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-out
Purpose:
To specify the execution time for one PostScript job. The change becomes effective after the printer is turned off
and then on again.
Values:
Off*
Job time-out does not occur.
On
1 minute
*
A PostScript error occurs if processing is not completed after the specified time.
Available Range:
1-900 minutes.
Paper Select Mode
Purpose:
To specify the way to select the tray for PostScript mode. The change becomes effective after the printer is turned off
and then on again.
Values:
Auto*
The tray is selected as the same setting as in the PCL mode.
Select from Tray
The tray is selected in a method compatible with regular Post Script printers.
196
Understanding the Printer Menus
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print mode.
Values:
Color*
Prints in the color mode.
Black
Prints in the black and white mode.
Network
Use the Network menu to change the printer settings affecting jobs sent to the printer through the wired or
wireless network.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the
printer is turned off and then on again.
Values:
Auto*
Detects the Ethernet settings automatically.
10BASE- T Half
Uses 10BASE-T Half-duplex.
10BASE- T Full
Uses 10BASE-T Full-duplex.
100BASE- TX Half
Uses 100BASE-TX Half-duplex.
100BASE- TX Full
Uses 100BASE-TX Full-duplex.
1000BASE- T Full
Uses 1000BASE-T Full-duplex.
Wireless Status
NOTE: Wireless Status feature is available only when the printer is connected using the wireless network.
Purpose:
To confirm the wireless communication status.
Values:
Connection
(Good)
(Acceptable)
(Low)
(No Reception)
SSID
Displays the name that identifies the wireless network.
Enc.
Displays the encryption type.
Wireless Setup
NOTE: Wireless Setup is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network interface.
Understanding the Printer Menus
197
Values:
Select access
Manual Setup
Select the access point from the list.
WEP Key Entry
When you select an access point using WEP as the security
method, enter the WEP key. For 64bit keys, up to 10
hexadecimal characters can be entered. For 128bit keys, up
to 26 hexadecimal characters can be entered.
PassPhrase Entry
When you select an access point using WPA, WPA2, or
Mixed as the encryption type, enter the passphrase of 8 to
63 alphanumeric characters.
Enter Network (SSID)
Specifies a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.
Infrastructure
Select when you configure the wireless setting through the
access point such as a wireless router.
No Security
Specifies No Security to configure the wireless setting
without specifying a encryption type from WEP, WPA-PSKTKIP, and WPA-PSK-AES.
Mixed mode PSK*
Select to configure the wireless setting with the encryption
type of Mixed mode PSK. Mixed mode PSK automatically
selects the encryption type from either WPA-PSK-TKIP,
WPA-PSK-AES, or WPA2-PSK-AES.
PassPhrase
Entry
WPA-PSK-TKIP
Select to configure the wireless setting with the encryption
type of WPA-PSK-TKIP.
PassPhrase
Entry
WPA2-PSK-AES
Understanding the Printer Menus
Specifies the transmit key from Auto*,
WEP Key 1, WEP Key 2, WEP Key 3,
and WEP Key 4.
Select to configure the wireless setting without the access
point such as a wireless router.
No Security*
Select to configure the wireless setting without specifying
the encryption type from WEP.
WEP
Specifies the WEP key to use through the wireless network.
For 64bit keys, up to 10 hexadecimal characters can be
entered. For 128bit keys, up to 26 hexadecimal characters
can be entered.
Transmit Key
198
Specifies the passphrase of
alphanumeric characters from 8 to 63.
Specifies the WEP key to use through the wireless network.
For 64bit keys, up to 10 hexadecimal characters can be
entered. For 128bit keys, up to 26 hexadecimal characters
can be entered.
Transmit Key
Ad-hoc
Specifies the passphrase of
alphanumeric characters from 8 to 63.
Select to configure the wireless setting with the encryption
type of WPA2-PSK-AES.
PassPhrase
Entry
WEP
Specifies the passphrase of
alphanumeric characters from 8 to 63.
Specifies the transmit key from WEP
Key 1*, WEP Key 2, WEP Key 3, and
WEP Key 4.
WPS Setup
NOTE: WPS Setup is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network using WPS.
Values:
Push Button Control
PIN Code
Cancel*
Cancels the wireless setting with the encryption type of WPS-PBC.
Start
Configures the wireless setting with the encryption type of WPS-PBC.
Start Configuration
Configures the wireless setting using the PIN code assigned automatically
by the printer.
Print PIN Code
Prints the PIN code. Confirm it when entering PIN assigned to the printer
into your computer.
Reset Wireless
NOTE: Reset Wireless feature is available only when the printer is connected using the wireless network.
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network
settings are reset to their default values.
TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
IP Mode
Dual Stack*
Uses both IPv4 and IPv6 to set the IP address.
IPv4 Mode
Uses IPv4 to set the IP address.
IPv6 Mode
IPv4
Get IP Address
Uses IPv6 to set the IP address.
AutoIP
*
Sets the IP address automatically. A random value in the range of
169.254.1.0 to 169.254.254.255 that is not currently in use on the
network is set as the IP address. The subnet mask is set as
255.255.0.0.
BOOTP
Sets the IP address using BOOTP.
RARP
Sets the IP address using RARP.
DHCP
Sets the IP address using DHCP.
Panel
Use this option when you want to set the IP address manually on
the operator panel.
IP Address
When an IP address is being set manually, the IP is allocated to the
printer using the format nnn.nnn.nnn.nnn. Each octet that makes
up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and
any value in the range of 224 to 254 cannot be specified for the
first octet of a gateway address.
Subnet Mask
When an IP address is being set manually, the subnet mask is
specified using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255.
255.255.255.255 cannot be specified as the subnet mask.
Understanding the Printer Menus
199
Ipsec
*1
Gateway Address
When an IP address is being set manually, the gateway address is
specified using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127
and any value in the range of 224 to 254 cannot be specified for
the first octet of a gateway address.
Disable*
Disables Ipsec.
Ipsec feature is available only when IPsec is enabled on the Dell Printer Configuration Web Tool.
Protocols
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
Values:
LPD
Disable
Enable
Port9100
Disable
Enable
FTP
IPP
*
*
Disables SMB TCP/IP port.
Enables SMB TCP/IP port.
Disable
Disables SMB NetBEUI port.
*
Enables SMB NetBEUI port.
Disable
Disables WSD port.
*
Enables WSD port.
Disable
Enable
Bonjour(mDNS)
Enables the E-mail Alert feature.
Disable
Disables access to the Dell Printer Configuration Web Tool embedded in the
printer.
Enable*
Enables access to the Dell Printer Configuration Web Tool embedded in the
printer.
Disable
Disables Bonjour (mDNS).
*
Enables Bonjour (mDNS).
Enable
HTTP-SSL/TLS
Google Cloud Print
Enables the Simple Network Management Protocol (SNMP) UDP port.
Disables the E-mail Alert feature.
Disable
*1
Disables the SNMP UDP port.
*
Enable
Telnet
*
Disable
Enable
EWS
Enables IPP port.
*
Enable
E-mail Alert
Disables IPP port.
Disable
Enable
SNMP UDP
Enables the Port9100 port.
Enables the FTP port.
Enable
WSD Print
Disables the Port9100 port.
Disables the FTP port.
Enable
SMB NetBEUI
Enables the Line Printer Daemon (LPD) port.
*
Disable
SMB TCP/IP
Disables the LPD port.
Disable
Enable
200
*
*
Disables Telnet.
Enables Telnet.
Disable*
Disables HTTP-SSL/TLS.
Enable
Enables HTTP-SSL/TLS.
Disable*
Disables Google Cloud Print.
Enable
Enables Google Cloud Print.
Understanding the Printer Menus
*1
HTTP-SSL/TLS feature is available only when a digital certificate is set from the Dell Printer Configuration Web Tool.
IP Filter
NOTE: IP Filter feature is available only for LPD or Port9100.
Purpose:
To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP
addresses. The change becomes effective after the printer is turned off and then on again.
Values:
Sets the IP address for Filter n.
No. n / IP Address (n is 1–5.)
Sets the address mask for Filter n.
No. n / Mask (n is 1–5.)
No. n / Mode (n is 1–5.)
*
Off
Disables the IP Filter feature for Filter n.
Accept
Accepts an access from the specified IP address.
Reject
Rejects an access from the specified IP address.
IEEE 802.1x
NOTE: IEEE 802.1x feature is available only when the printer is connected using LAN cable and it is available only when the IEEE
802.1x authentication is enabled.
Purpose:
To disable IEEE 802.1x authentication. The change becomes effective after the printer is turned off and then on
again.
Reset LAN
Purpose:
To initialize wired network data stored in non-volatile memory (NVM). After executing this function and rebooting
the printer, all wired network settings are reset to their default values.
Adobe Protocol
Purpose:
To specify PostScript communication protocol for a parallel interface, you can configure the Adobe Protocol
settings for the wired network. The change becomes effective after the printer is turned off and then on again.
Values:
Auto
Used when auto-detecting the PostScript communication protocol.
Standard
Used when the communication protocol is in ASCII interface.
BCP
Used when the communication protocol is in binary format.
TBCP
*
Binary
Used when the communication protocol supports both ASCII and binary data to switch between them
according to the specified control code.
Used when no special processing is required for data.
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
USB Port
NOTE: USB Port feature is available only for the USB port on the rear of the printer.
Understanding the Printer Menus
201
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned off and then on
again.
Values:
Disable
Disables the USB interface.
*
Enables the USB interface.
Enable
Adobe Protocol
Purpose:
To specify PostScript communication protocol for a parallel interface, you can configure the Adobe Protocol
settings for the wired network. The change becomes effective after the printer is turned off and then on again.
Values:
Auto
Used when auto-detecting the PostScript communication protocol.
Standard
Used when the communication protocol is in ASCII interface.
BCP
Used when the communication protocol is in binary format.
TBCP
*
Used when the communication protocol supports both ASCII and binary data to switch
between them according to the specified control code.
Binary
Used when no special processing is required for data.
System Settings
Use System Settings to configure the power saving mode, warning tones, time-out duration, display language,
and job log auto print settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Power Saver Timer
CAUTION: If the Auto-Off Timer feature is set and the power is turned off, stored data in RAM Disk is cleared.
Purpose:
To specify the time for transition to power saver mode.
Values:
6 minutes*
Sleep
Available Range: 1–60 minutes
8 minutes*
Deep Sleep
Available Range: 1–60 minutes
Auto-Off Timer
*1
Off
On*
Specifies the time taken by the printer to enter Deep Sleep mode
after it has entered Sleep mode.
Disables the Auto-Off Timer.
180 minutes*
Available Range:
60–1440 minutes
*1
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
Specifies the time it takes to automatically turn off the printer after
it has entered Deep Sleep mode.
Auto-Off Timer feature is available only in certain regions.
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
202
Understanding the Printer Menus
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 60 minutes for power saver mode if you want a balance between energy consumption
and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer. You can also change the status of the printer to the standby mode by pressing any button on the operator
panel.
If the Auto-Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the
printer back on, physically turn the power switch of the printer to On.
Auto Reset
Purpose:
To automatically reset the settings to the default settings and return to the standby mode after you do not specify
any settings for the specified time.
Values:
45sec*
1min
2min
3min
4min
Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is cancelled if the
time-out time is exceeded.
Values:
Off
*
On
Disables the fault time-out.
60
seconds*
Available Range:
3-300 seconds
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the time-out
time is exceeded.
Values:
Off
*
On
Disables the job time-out.
30
seconds*
Sets the time the printer waits for data to arrive from the computer.
Available Range:
5–300 seconds
Understanding the Printer Menus
203
Date & Time
Purpose:
To specify the date and time formats.
Values:
Set Date & Time
Time Zone
Date
Sets the date depending on the Date Format settings.
Time
Sets the time.
Date Format
Time Format
Sets the time zone.
Sets the date format.
12H
24H
Sets the time in 12-hour format.
*
Sets the time in 24-hour format.
Audio Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Values:
Control Panel
Invalid Key
Machine Ready
Off*
Does not emit a tone when the operator panel input is correct.
On
Emits a tone when the operator panel input is correct.
Off
*
Emits a tone when the operator panel input is incorrect.
Off
Does not emit a tone when the printer is ready to process a job.
*
Job Completed
Fault Tone
On
Emits a tone when the printer is ready to process a job.
Off
Does not emit a tone when a job is complete.
On*
Emits a tone when a job is complete.
Off
Does not emit a tone when a job ends abnormally.
*
Alert Tone
Out of Paper
On
Emits a tone when a job ends abnormally.
Off
Does not emit a tone when a problem occurs.
On*
Emits a tone when a problem occurs.
Off
Does not emit a tone when the printer runs out of paper.
*
Low Toner Alert
On
Emits a tone when the printer runs out of paper.
Off
Does not emit a tone when a toner is low.
On*
Auto Clear Alert
Off
*
On
All Tones
Does not emit a tone when the operator panel input is incorrect.
On
Emits a tone when a toner is low.
Does not emit a tone 5 seconds before the printer performs auto clear.
Emits a tone 5 seconds before the printer performs auto clear.
*
Off
Disables all the alert tones.
On
Enables all the alert tones at once.
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
204
Understanding the Printer Menus
Values:
Millimeters (mm)*
Selects millimeter as the default measurement unit.
Inches (")
Selects inch as the default measurement unit.
NOTE: The default for mm/inch varies depending on other settings, such as Country and Document Size.
Default Paper Size
Purpose:
To specify the default paper size.
Values:
mm series
A4*1
Letter
*1
Denotes country-specific factory default values.
inch series
A4
Letter*1
*1
Denotes country-specific factory default values.
A4<>Letter Switch
Purpose:
To print A4 size jobs on Letter size paper if A4 is not available or to print Letter size jobs on A4 size paper if Letter
size paper is not available.
Values:
Off*1
Does not print A4 size jobs on Letter size paper or Letter size jobs on A4 paper.
*
On
Prints A4 size jobs on Letter size paper if A4 size paper is not available in the paper trays
and vice versa (Letter size job on A4 size paper).
*1
Depending on the printer setting, the printer will continue to print on existing media of a different size or prompt the user to select from
the following:
• Delete Job
• Supply with correct media
Auto Log Print
Purpose:
To automatically print a job history report after every 20 jobs.
Values:
Off*
Does not automatically print a job history report.
On
Automatically prints a job history report.
Print logs can also be printed using the Report / List menu.
Understanding the Printer Menus
205
Report 2 Sided Print
NOTE: Report 2 Sided Print feature is available only for Dell C3760dn Color Laser Printer.
Purpose:
To specify to print reports on both sides a sheet of paper.
Values:
1 Sided*
Prints reports on one side of a sheet of paper.
2 Sided
Prints reports on both side of a sheet of paper.
Print ID
Purpose:
To specify a location where the user ID is printed.
Values:
Off*
Does not print the user ID.
Top Left
Prints the user ID on the top left of the page.
Top Right
Prints the user ID on the top right of the page.
Bottom Left
Prints the user ID on the bottom left of the page.
Bottom Right
Prints the user ID on the bottom right of the page.
NOTE: When printing on DL size paper, a part of the user ID may not be printed correctly.
Print Text
Purpose:
To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer
receives it. Text data is printed on A4 or Letter size paper.
Values:
Off
Does not print the received data.
*
On
Prints the received data as text data.
Banner Sheet
Purpose:
To specify the position of banner sheet, and also specify the tray in which the banner sheet is loaded.
Values:
Insert Position
Specify Tray
Off*
Does not print the banner sheet.
Front
Inserted before the first page of every copy.
Back
Inserted after the last page of every copy.
Front & Back
Inserted before the first page of every copy and after the last page of every
copy.
MPF
The banner sheet is loaded in the MPF.
*
The banner sheet is loaded in tray1.
*1
The banner sheet is loaded in the optional 550-sheet feeder.
Tray 1
Tray 2
206
Understanding the Printer Menus
*1
This item is available only when the optional 550-sheet feeder is installed.
RAM Disk
NOTE: RAM Disk feature is available only when the optional 512 MB memory module is installed on the printer.
NOTE: RAM Disk feature is not available when the optional hard disk is installed.
Purpose:
To allocate memory to the RAM disk file system for the Secure Print, Private Mail Box Print, Public Mail Box Print,
and Proof Print features. The change becomes effective after the printer is turned off and then on again.
Values:
Off
Does not allocate memory to the RAM disk file system. Secure Print, Private Mail Box Print,
Public Mail Box Print, and Proof Print jobs will abort and be recorded to the job log.
300 MB*
On
Sets the allocation of memory to the RAM disk file system in increments of 50 MB.
Available Range:
50-450 MB
NOTE: Restart your printer when you change the settings for the RAM Disk menu.
Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not match
the paper size settings for the current job.
Values:
Off
No tray size substitute accepted.
Larger Size
Substitutes paper of next largest size. When there is no larger paper size, the printer substitutes paper of
nearest size.
Nearest Size*
Substitutes paper of nearest size.
Use MPF
Substitutes paper from the MPF.
Set Available Time
Purpose:
Sets the available time for the Print function.
Values:
Print
Off*
Does not set the time when printing is available.
On
Sets the time when printing is available.
Start Time
Sets the start time of the available time.
End Time
Sets the end time of the available time.
Recurrence
Sets the day of the week to repeat the setting.
NOTE: Set Available Time can be configured when Print is set to On.
Secure Job Expiration
NOTE: Secure Job Expiration feature is available only when RAM Disk is set to Enable or when the optional hard disk is
installed.
Understanding the Printer Menus
207
Purpose:
To specify the date and time to delete the files stored as Secure Print in the RAM disk or the optional hard disk.
Values:
Expiration Mode
Off*
Does not set the date and time to delete the files stored as Secure Print in
the RAM Disk or the optional hard disk.
On
Sets the date and time to delete the files stored as Secure Print in the RAM
Disk or the optional hard disk.
Expiration Time
Recurrence
Weekly Setting
Sets the time to delete the files stored as Secure Print in the RAM Disk or
the optional hard disk.
Daily
Sets the recurrence to delete the files stored as Secure Print in the RAM Disk
or the optional hard disk daily.
Weekly*
Sets the recurrence to delete the files stored as Secure Print in the RAM Disk
or the optional hard disk weekly.
Monthly
Sets the recurrence to delete the files stored as Secure Print monthly.
Monday
Sets the day of the week to delete the files stored as Secure Print.
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday*
Monthly Setting
1 day*
Available Range:
1-28 days
Sets the day of the month to delete the files stored as Secure Print in the
RAM Disk or the optional hard disk.
ColorTrack Mode
Purpose:
To specify who has access to color printing.
Values:
Off*
Does not limit access to color printing.
Internal Mode
Limits access to color printing. Authentication is done using user information registered on the printer.
External Mode
Limits access to color printing. Authentication is done using an external authentication server.
Non Registered User
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
Off*
Does not permit non-account user to print the data.
On*1
Permits non-account user to print the data.
*1
208
Set Non Account User Password using the Dell Printer Configuration Web Tool.
Understanding the Printer Menus
Auto Color To Mono Print
NOTE: Auto Color To Mono Print feature is available when Dell ColorTrack is disabled.
Purpose:
To specify whether to print all print jobs in black and white even when color print is specified.
Values:
Off*
Prints according to the specified color mode.
On
Prints all print jobs in black and white even when color print is specified.
ColorTrack Error Report
Purpose:
To specify whether to automatically print error-related information if printing with ColorTrack results in an error.
Values:
Off*
Does not print the error report when printing with ColorTrack results in an error.
On
Prints the error report when printing with ColorTrack results in an error.
Letterhead 2 Sided
NOTE: Letterhead 2 Sided Mode feature is available only for Dell C3760dn Color Laser Printer.
Purpose:
To specify whether to print on both sides when using letterhead.
Values:
Disable*
Does not print on both sides of letterhead.
Enable
Prints on both sides of letterhead.
Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
*
On
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
S/W Download
Purpose:
To enable or disable download of firmware updates.
Values:
Disable
Disables firmware updates.
Enable*
Enables firmware updates.
Understanding the Printer Menus
209
Use Another Tray
Purpose:
To change to another paper tray when a paper size runs out in the specified paper tray.
Values:
Off
Does not print on other paper sizes in other paper trays if the paper size specified in the job runs out.
*
On
Shows a message to select another tray when the specified paper runs out in the paper tray.
NOTE: If you select another paper tray with paper size smaller than the paper size specified in the job, the parts that do not fit
are not printed (print size is not adjusted automatically).
Power On Wizard
Purpose:
To perform initial setup for the printer.
Maintenance
Use the Maintenance menu to initialize the NV (non-volatile) memory, configure the plain paper quality
adjustment settings, and configure the security settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To confirm the current F/W version.
Service Tag
Purpose:
To confirm the service tag.
Express Code
Purpose:
To confirm the express service code.
Paper Density
Purpose:
To specify paper density settings.
Values:
Plain
Light
Normal*
Label
Light
Normal*
210
Understanding the Printer Menus
Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing)
Values:
K Offset
0*
If faint black colored ghosts appear, try to decrease the value.
Available Range: -5 to +5
YMC Offset
0*
Available Range: -5 to +5
If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease
the value.
Adjust 2nd BTR
NOTE: The print quality changes depending on the setting values you select for this item.
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
Values:
Plain
0*
Available Range:
(Lighten) -5 to (Darken) +10
Plain Thick
0*
Sets the transfer roller voltage in increments of 1. The default
settings may not give the best output on all paper types. If you see
mottles on the print output, try to increase the voltage. If you see
white spots on the print output, try to decrease the voltage.
Available Range:
(Lighten) -5 to (Darken) +10
Covers
0*
Available Range:
(Lighten) -5 to (Darken) +10
Covers Thick
0*
Available Range:
(Lighten) -5 to (Darken) +10
Coated
0*
Available Range:
(Lighten) -5 to (Darken) +10
Coated Thick
0*
Available Range:
(Lighten) -5 to (Darken) +10
Label
0*
Available Range:
(Lighten) -5 to (Darken) +10
Envelope
0*
Available Range:
(Lighten) -5 to (Darken) +10
Recycled
0*
Available Range:
(Lighten) -5 to (Darken) +10
Understanding the Printer Menus
211
Adjust Fusing Unit
NOTE: The print quality changes depending on the setting values you select for this item.
Purpose:
To adjust the temperature setting of the fusing unit for each paper type.
Values:
0*
Plain
Available Range:
(Lighten) -3 to (Darken) +3
Plain Thick
0*
Sets the fusing unit temperature in increments of 1. The default
settings may not give the best output on all paper types. When the
printed paper has curled, try to lower the temperature. When the
toner does not fuse on the paper properly, try to increase the
temperature.
Available Range:
(Lighten) -3 to (Darken) +3
0*
Covers
Available Range:
(Lighten) -3 to (Darken) +3
Covers Thick
0*
Available Range:
(Lighten) -3 to (Darken) +3
0*
Coated
Available Range:
(Lighten) -3 to (Darken) +3
Coated Thick
0*
Available Range:
(Lighten) -3 to (Darken) +3
0*
Label
Available Range:
(Lighten) -3 to (Darken) +3
Envelope
0*
Available Range:
(Lighten) -3 to (Darken) +3
Recycled
0*
Available Range:
(Lighten) -3 to (Darken) +3
Auto Reg Adjust
Purpose:
To specify whether to automatically perform color registration adjustment.
Values:
Off
*
On
212
Does not automatically perform color registration adjustment.
Automatically performs color registration adjustment.
Understanding the Printer Menus
Color Reg Adjust
Purpose:
To manually perform color registration adjustment.
Manual Color Registration Adjustments are required when the printer is initially installed and after the printer is
moved.
NOTE: The Color Reg Adjust feature can be configured when Auto Reg Adjust is set to Off.
Values:
Auto Correct
Color Regi Chart
Enter Number
Cancel*
Does not perform color registration correction.
Start
Automatically performs color registration correction.
Yes
Prints a color registration chart. The color registration chart prints a lattice pattern of
yellow, magenta, and cyan lines. On the chart, find the values on the right side that are
next to the line that is perfectly straight for each of the three colors. If the value for this
line is 0, color registration adjustment is not required. If the value for this line is any
value other than 0, specify the adjustment values under lateral adjustment and process
adjustment in Enter Number.
No*
Does not print a color registration chart.
LY
Available Range:
-9 to +9
LM
LC
RY
RM
Available Range:
-9 to +9
Sets lateral (perpendicular to paper feed direction) and process
(paper feed direction) color adjustment values individually for
Yellow, Magenta, and Cyan. Enter a number in order of lateral
adjustment (left), lateral adjustment (right), and process
(Set) button to save all the settings.
adjustment. Press the
RC
PY
PM
Available Range:
-9 to +9
PC
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Initialize Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Reset Fusing Unit
Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.
Reset Transfer Belt Unit
Purpose:
To initialize the life counter of the transfer belt unit. After replacing the transfer belt unit, be sure to initialize its life
counter.
Understanding the Printer Menus
213
Clear Job History
Purpose:
To clear the job history of all finished jobs.
Clear Storage
NOTE: Clear Storage feature is available only when the additional 512 MB memory module is installed and RAM Disk is set to
On or when the optional hard disk is installed.
Purpose:
To clear all files stored as Secure Print, Private Mail Box Print, Public Mail Box Print, Proof Print, and Stored Print in
the Ram disk or the optional hard disk.
Values:
All Clear
Deletes all files stored as Secure Print, Private Mail Box Print, Public Mail Box Print, and Proof
Print in the Ram disk or the optional hard disk.
Secure Document
Deletes all files stored as Secure Print in the Ram disk or the optional hard disk.
Stored Document
Deletes all files stored as Stored Print in the Ram disk or the optional hard disk.
Format Hard Disk
NOTE: Format Hard Disk feature is available only when the optional hard disk is installed.
Purpose:
To initialize the optional hard disk.
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
CAUTION: Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Values:
Off*
Does not use toner cartridge of another manufacturer.
On
Uses toner cartridge of another manufacturer.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are
performed by specifying the altitude of the location where the printer is being used.
NOTE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner, etc.
Values:
0m*
Sets the altitude of the location where the printer is installed.
1000m
2000m
3000m
214
Understanding the Printer Menus
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being
changed accidentally.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
"Panel Lock"
Panel Lock
Purpose:
To set a limited access to Admin Settings with a password, and to set or change the password.
Values:
Panel Lock Control
*1
Change Password
*1
Disable*
Disables password protection for Admin Settings.
Enable
Enables password protection for Admin Settings.
0000–9999
Sets or changes the password required to access Admin Settings.
This item is available only when Panel Lock Control is set to Enable.
Function Enabled
NOTE: Function Enabled feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify whether to enable or disable each of the printer functions, or to require a password to use the functions.
Values:
USB Direct Print
On*
Enables the USB Direct Print function.
On (Password)
Enables the USB Direct Print function, but requires a password.
On (Color
Password)
Enables the USB Direct Print function with a color mode, but requires a
password.
Off
Disables the USB Direct Print function.
*1
Change Password
*1
Changes the password that is set under the Function Enabled menu.
This item is available only when On (Password) or On (Color Password) is enabled.
Data Encryption
NOTE: Data Encryption feature is available only when the optional hard disk is installed.
Purpose:
To disable or enable data encryption when using the printer.
Values:
Encryption
Encryption Key
Off*
Disables encryption of the data.
On
Enables encryption of the data.
Sets a key that is required for encryption.
Understanding the Printer Menus
215
Hard Disk Over write
NOTE: Hard Disk Over write feature is available only when the optional hard disk is installed.
NOTE: Overwrite of the hard disk may take several hours. When overwriting the hard disk, all functions of the printer are
inoperable.
Purpose:
To erase the contents of the entire hard disk by overwriting the hard disk with meaningless data.
Values:
Off*
Disables overwrite of the hard disk.
Single Pass
Overwrites the hard disk once.
3 Pass
Overwrites the hard disk three times.
Login Error
NOTE: Login Error feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin
Settings and Report/List menu.
Values:
Off*
Does not allow an administrator to log in after one error entry attempt.
5*
On
Sets the number of error entry attempts allowed when an administrator logs in.
Available Range: 1-10
Defaults Settings
Use Defaults Settings to modify the USB Direct Print menu defaults.
USB Direct Print Defaults
Purpose:
To modify the defaults for the USB Direct Print Defaults menu. See "USB Direct Print" for more details.
Tray Settings
Use the Tray Settings menu to define the print media loaded in tray1 and the optional 550-sheet feeder.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
MPF
Purpose:
To specify the paper loaded in the MPF.
Values:
Paper Size*1
Use Driver Settings*
mm series
A4
A5
216
Understanding the Printer Menus
B5
Letter
Executive
Folio
Legal
Envelope #10
Monarch
DL
C5
Custom Size
inch series
Use Driver Settings*
Letter
Executive
Folio
Legal
A4
A5
B5
Envelope #10
Monarch
DL
C5
Custom Size
Paper Type*1
Plain*
Plain Thick
Covers
Covers Thick
Coated
Coated Thick
Label
Envelope
Recycled
Letterhead
Preprinted
Prepunched
Color
Plain S2
Color S2
Plain Thick S2
Recycled S2
MPF Mode
Panel Specified
Uses the paper size and paper type set from the operator panel.
*
DriverSpecified
Uses the paper size and paper type set on the printer driver.
Understanding the Printer Menus
217
Display Popup*1
*1
Off
Does not display a popup message that prompts to set Paper Type
and Paper Size when paper is loaded in the MPF.
On*
Displays a popup message that prompts to set Paper Type and
Paper Size when paper is loaded in the MPF.
This item is available only when MPF
Tray 1
Purpose:
To specify the paper loaded in tray1.
Values:
Paper Size
A4*1
mm series
A5
B5
Letter
Executive
Folio
Legal
Custom Size
inch series
Letter*1
Executive
Folio
Legal
A4
A5
B5
Custom Size
Paper Type
Plain*
Plain Thick
Covers
Covers Thick
Coated
Coated Thick
Recycled
Letterhead
Preprinted
Prepunched
Color
Plain S2
Color S2
Plain Thick S2
Recycled S2
218
Understanding the Printer Menus
Mode is set to Panel Specified.
Display Popup
*1
Off
Does not display a popup message that prompts
to set Paper Type and Paper Size when
paper is loaded in tray1.
On*
Displays a popup message that prompts to set
Paper Type and Paper Size when paper
is loaded in tray1.
Denotes country-specific factory default value.
NOTE: For more information on supported paper sizes, see "Supported Paper Sizes."
Tray 2
NOTE: Tray 2 feature is available only when the optional 550-sheet feeder is installed.
Purpose:
To specify the paper loaded in the optional 550-sheet feeder.
Values:
Paper Size
Auto*
Paper Type
Plain*
Custom Size
Plain Thick
Covers
Covers Thick
Coated
Coated Thick
Recycled
Letterhead
Preprinted
Prepunched
Color
Plain S2
Color S2
Plain Thick S2
Recycled S2
Display Popup
Off
Does not display a popup message that prompts to set Paper Type
and Paper Size when paper is loaded in the optional 550-sheet
feeder.
On*
Displays a popup message that prompts to set Paper Type and
Paper Size when paper is loaded in the optional 550-sheet feeder.
*1 Denotes country-specific factory default value.
Understanding the Printer Menus
219
Tray Priority
Purpose:
To set the priority order of the paper trays for automatic tray selection. If paper trays loaded with the same paper size
and type exists, the paper tray is selected according to this priority order.
Values:
1st Priority
*1
2nd Priority
3rd Priority
*1
*2
MPF*
Sets the MPF as the first priority.
Tray 1
Sets tray1 as the first priority.
Tray 2
Sets the optional 550-sheet feeder as the first priority.
MPF
Sets the MPF as the second priority.
Tray 1*
Sets tray1 as the second priority.
Tray 2
Sets the optional 550-sheet feeder as the second priority.
MPF
Sets the MPF as the third priority.
Tray 1
Sets tray1 as the third priority.
Tray 2*
Sets the optional 550-sheet feeder as the third priority.
The tray selected in 1st
Priority is not displayed.
The trays selected in 1st Priority and 2nd Priority are not displayed.
*2
Panel Language
Purpose:
To determine the language of the text on the LCD panel.
Values:
English*
Français
Italiano
Deutsch
Español
Dansk
Nederlands
Norsk
Svenska
220
Understanding the Printer Menus
Print Menu
Use the Print Menu to print a job using the Secure Print, Private Mail Box Print, Public Mail Box Print, and Proof
Print features.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Secure Print
NOTE: Secure Print feature is available only when RAM disk is set to On or the optional hard disk is installed.
Purpose:
To print confidential jobs. The printer can hold the job in memory until you arrive at the printer and type the
password on the operator panel.
Values:
Select User ID
Enter the password you specified on the printer driver.
*1
All Documents
*2
document n
*1
Print and Delete
Deletes all documents from print memory after
printing them.
Delete
Deletes all documents from print memory.
Print and Delete
Deletes the specified document from print memory
after printing it.
Delete
Deletes the specified document from print memory.
This item is available only when the multiple print jobs are stored.
*2 The document name is displayed. The save date and time are displayed if the document name is not specified.
Private Mail Box
NOTE: Private Mail Box feature is available only when RAM disk is set to On or the optional hard disk is installed.
Purpose:
To specify whether and how to print the job stored in the Private Mail Box.
Values:
Select User ID
Enter the password you specified on the printer
driver.
All Documents*1 Print
Prints all documents and saves them in memory.
Use PC Settings
Sets the number of copies specified on the
printer driver.
Input Number of
Copies
Sets the number of copies.
Print and Delete
*2
document n
Deletes all documents from print memory after
printing them.
Use PC Settings
Sets the number of copies specified on the
printer driver.
Input Number of
Copies
Sets the number of copies.
Delete
Deletes all documents from print memory.
Print
Prints all documents and saves them in memory.
Understanding the Printer Menus
221
Input Number of
Copies
Print and Delete
Deletes all documents from print memory after
printing them.
Input Number of
Copies
Delete
*1
Sets the number of copies.
Sets the number of copies.
Deletes all documents from print memory.
This item is available only when the multiple print jobs are stored.
*2 The document name is displayed. The save date and time are displayed if the document name is not specified.
Public Mail Box
NOTE: Public Mail Box feature is available only when RAM disk is set to On or the optional hard disk is installed.
Purpose:
To specify whether and how to print the job stored in the Public Mail Box.
Values:
Select User ID
All Documents*1 Print
Prints all documents and saves them in memory.
Use PC Settings
Sets the number of copies specified on the
printer driver.
Input Number of
Copies
Sets the number of copies.
Print and Delete
*2
document n
Deletes all documents from print memory after
printing them.
Use PC Settings
Sets the number of copies specified on the
printer driver.
Input Number of
Copies
Sets the number of copies.
Delete
Deletes all documents from print memory.
Print
Prints all documents and saves them in memory.
Input Number of
Copies
Print and Delete
Deletes all documents from print memory after
printing them.
Input Number of
Copies
Delete
1
*
Sets the number of copies.
Sets the number of copies.
Deletes all documents from print memory.
This item is available only when the multiple print jobs are stored.
*2 The document name is displayed. The save date and time are displayed if the document name is not specified.
222
Understanding the Printer Menus
Proof Print
NOTE: Proof Print feature is available only when RAM disk is set to Enable.
Purpose:
To specify whether and how to print the job stored in the Proof Print. When the print job is sent from the printer
driver on the computer, a single copy is printed for you to check the print result. If you do not have problems with
the print result, you can choose to print more copies. This prevents a large number of misprinted copies from being
printed at one time.
Values:
Select User ID
All Documents*1 Print
Prints all documents and saves them in memory.
Use PC Settings
Sets the number of copies specified on the
printer driver.
Input Number of
Copies
Sets the number of copies.
Print and Delete
Deletes all documents from print memory after
printing them.
Use PC Settings
Sets the number of copies specified on the
printer driver.
Input Number of
Copies
Sets the number of copies.
Delete
*2
document n
Deletes all documents from print memory.
Print
Prints all documents and saves them in memory.
Input Number of
Copies
Print and Delete
Deletes all documents from print memory after
printing them.
Input Number of
Copies
Delete
*1
Sets the number of copies.
Sets the number of copies.
Deletes all documents from print memory.
This item is available only when the multiple print jobs are stored.
*2 The document name is displayed. The save date and time are displayed if the document name is not specified.
USB Direct Print
NOTE: USB Direct Print feature is available only when a USB memory is inserted in the USB port.
Select Document
Purpose:
To specify the document stored in the root, file, or folder in a USB memory.
Print Start
Purpose:
To start printing the selected file.
Document
Purpose:
To change the file you want to print.
Understanding the Printer Menus
223
Output Color
Purpose:
To specify whether to print in black and white or in color.
Values:
Full Color*
Prints in color.
Black & White
Prints in black and white.
Select Tray
Purpose:
To specify the input tray.
Values:
MPF
Tray 1*
Tray 2*1
*1
This item is available only when the optional 550-sheet
feeder is installed.
MPF Paper Size
NOTE: MPF Paper Size feature is available only when MPF: Any is selected in Select Tray.
Purpose:
To specify the paper size for the MPF.
Values:
mm series
A4*1
A5
B5
Letter
Folio
Legal
*1
Denotes country-specific factory default values.
inch series
Letter*1
Folio
Legal
A4
A5
B5
*1
224
Denotes country-specific factory default values.
Understanding the Printer Menus
MPF Paper Type
NOTE: MPF Paper Type feature is available only when MPF: Any is selected in Select Tray.
Purpose:
To specify the paper type for the MPF.
Values:
Plain*
Plain Thick
Covers
Covers Thick
Coated
Coated Thick
Envelope
Recycled
Letterhead
Prepunched
Color
2 Sided Printing
NOTE: 2 Sided Printing feature is available only for Dell C3760dn Color Laser Printer.
Purpose:
To print on both sides of a sheet of paper.
Values:
1 -> 1Sided*
Prints on one side of a sheet of paper.
Long Edge Binding
Prints on both sides of a sheet of paper to be bound by long edge.
Short Edge Binding
Prints on both sides of a sheet of paper to be bound by short edge.
Multiple-Up
Purpose:
To specify the output layout.
Values:
Off*
Prints one page on one side of a sheet of paper.
2-Up
Prints two pages on one side of a sheet of paper.
4-Up
Prints four pages on one side of a sheet of paper.
Collation
Purpose:
To specify whether to sort the job.
Values:
Collated
Sorts a job.
Understanding the Printer Menus
225
Uncollated
Does not sort a job.
PDF Password
Purpose:
To enter the password when you print a PDF file secured with a document open password (password to open the
PDF file).
Values:
Enter PDF Password
Enter the document open password to print the secure PDF job.
Panel Lock
This feature prevents unauthorized personnel from changing the settings made by the administrator. For regular
printing, items can be selected from the menu and printer settings remain unchanged. For regular printing, items
can be configured using the printer driver.
NOTE: Disabling the operator panel menus does not prevent access to the Stored Print and Tray Settings menus.
Enabling the Panel Lock
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Secure Settings is highlighted, and then press the
4 Ensure that Panel Lock is highlighted, and then press the
button until Enable is highlighted, and then press the
7 Enter the new password, and then press the
(Set) button.
(Set) button.
5 Ensure that Panel Lock Control is highlighted, and then press the
6 Press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
CAUTION: Be sure to remember the password. The procedure described below allows you to reset the password.
•
Turn off the printer. Then, while holding the
(Menu) button, turn on the printer. Perform steps 7 and 8.
8 Re-enter the password to confirm the password that you entered, and then press the
(Set) button.
The password has been changed.
NOTE: If you change the password while Panel Lock is Enable, perform steps 1 to 4 above. Press the
button until
Change Password is highlighted, and then press the
(Set) button. Perform steps 7 and 8 above to change the
password. This will change the password.
Disabling the Panel Lock
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Secure Settings is highlighted, and then press the
4 Ensure that Panel Lock is highlighted, and then press the
7 Enter the current password, and then press the
The setting has been changed.
226
Understanding the Printer Menus
(Set) button.
(Set) button.
5 Ensure that Panel Lock Control is highlighted, and then press the
6 Ensure that Disable is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters are reset to their default values.
The following menu parameters are exceptions and are not reset.
•
Network settings
•
Panel Lock settings and password
•
Function Enabled settings and passwords
•
Login Error settings
•
Set Available Time settings
•
Secure Job Expiration settings
•
USB Port settings
•
Data Encryption settings
•
Hard Disk Over write settings
•
ColorTrack Mode settings
•
ColorTrack Error Report settings
•
Non Registered User settings
When Using the Operator Panel
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Maintenance is highlighted, and then press the
4 Press the
button until Reset Defaults is highlighted, and then press the
5 Press the
button until Yes is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
The printer is restarted automatically.
Understanding the Printer Menus
227
228
Understanding the Printer Menus
Print Media Guidelines
17
Print media refers to paper, labels, envelopes, and coated paper among others. Your printer provides high-quality
printing on a variety of print media. Selecting the appropriate print media for your printer helps avoid printing
troubles. This section describes selecting and caring for print media.
NOTE: Use only laser print media. Do not use ink jet paper in your printer.
Paper
For the best print quality in color, use 75 g/m2 (20 lb) xerographic, grain long paper. For the best print quality in
black and white, use 90 g/m2 (24 lb) xerographic, grain long paper. It is recommended that you try a sample first
before buying large quantities of any print media.
When loading paper, identify the recommended print side on the paper package, and load the paper accordingly. See
"Loading Print Media in Tray1 and the Optional 550-Sheet Feeder" and "Loading Print Media in the MPF" for
detailed loading instructions.
Paper Characteristics
The following paper characteristics affect print quality and reliability. It is recommended that you follow these
guidelines when evaluating new paper stock.
Weight
The tray automatically feeds paper weights from 60 g/m2 to 216 g/m2 (16 lb to 80 lb bond) grain long. The
multipurpose feeder (MPF) automatically feeds paper weights from 60 g/m2 to 216 g/m2 (16 lb to 80 lb bond) grain
long. Paper lighter than 60 g/m2 (16 lb) may not feed properly, and could cause paper jams. For best performance,
use 75 g/m2 (20 lb bond) grain long paper.
Curl
Curl is the tendency of print media to curve at its edges. Excessive curl can cause paper feeding problems. Curl
usually occurs after the paper passes through the printer, where it is exposed to high temperatures. Storing paper
unwrapped, even in the paper tray, can contribute to paper curling prior to printing and cause feeding problems
regardless of humidity. When printing on curled paper, straighten the paper and then insert it into the MPF.
Smoothness
The degree of paper smoothness directly affects the print quality. If the paper is too rough, the toner does not fuse
on to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding
problems. Smoothness between 150 and 250 Sheffield points produces the best print quality.
Moisture Content
The amount of moisture in the paper affects both the print quality and the ability of the printer to feed the paper
properly. Leave the paper in its original packaging until you are ready to use it. This limits the exposure of the paper
to moisture changes that can degrade its performance.
Grain Direction
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of
the paper, or grain short, running the width of the paper. For 60 g/m2 to 135 g/m2 (16 lb to 36 lb bond) paper, grain
long fibers are recommended. For paper heavier than 135 g/m2 (36 lb bond), grain short is preferred.
Print Media Guidelines
229
Fiber Content
Most high-quality xerographic paper is made from 100 % chemically pulped wood. Paper containing fibers such as
cotton may lead to degraded paper handling.
Recommended Paper
To ensure the best print quality and feed reliability, use 75 g/m2 (20 lb) xerographic paper. Business paper designed
for general business use also provides acceptable print quality. Only use paper able to withstand high temperatures
without discoloring, bleeding, or releasing hazardous emissions. The laser printing process heats paper to high
temperatures. Check with the manufacturer or vendor to determine whether the paper you have chosen is
acceptable for laser printers.
It is recommended that you try a sample first before buying large quantities of any print media. When choosing any
print media, you should consider the weight, fiber content, and color.
Unacceptable Paper
The following paper types are not recommended for use with the printer:
•
Chemically treated paper used to make copies without carbon paper, also known as carbonless paper, carbonless
copy paper (CCP), or no carbon required (NCR) paper.
•
Preprinted paper with chemicals that may contaminate the printer.
•
Preprinted paper that can be affected by the temperature in the fusing unit.
•
Preprinted paper that requires a registration (the precise print location on the page) greater than ±0.09 inches,
such as optical character recognition (OCR) forms.
In some cases, you can adjust registration with your software program to successfully print on these forms.
•
Coated paper (erasable bond), synthetic paper, and thermal paper.
•
Rough-edged, rough or heavily textured surface paper, or curled paper.
•
Recycled paper containing more than 25 % post-consumer waste that does not meet DIN 19 309.
•
Multiple-part forms or documents.
•
Print quality may deteriorate (blank spaces or blotches may appear in the text) when printing on talc or acid paper.
Selecting Paper
Proper paper selection helps prevent jams and ensures trouble-free printing.
To help avoid jams or poor print quality:
•
Always use new, undamaged paper.
•
Before loading the paper, identify the recommended print side of the paper. This information is usually indicated
on the paper package.
•
Do not use paper that you have cut or trimmed.
•
Do not mix print media sizes, weights, or types in the same source. This may result in a paper jam.
•
Do not remove the tray while printing is in progress.
•
Ensure that the paper is properly loaded in the tray.
•
Flex the paper back and forth, and then fan them. Straighten the edges of the stack on a level surface.
230
Print Media Guidelines
Selecting Pre-Printed Media and Letterheads
When selecting pre-printed and letterhead paper for the printer:
•
Use grain long paper for best results.
•
Use only forms and letterheads printed using an offset lithographic or engraved printing process.
•
Select paper that absorb ink, but does not bleed.
•
Avoid paper with rough or heavily textured surfaces.
•
Use paper printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand
temperatures of 225 °C (437 °F) without melting or releasing hazardous emissions.
•
Use inks that are not affected by the resin in the toner or the silicone in the fusing unit. Inks that are oxidation-set
or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier.
Selecting Pre-Punched Paper
When selecting pre-punched paper for the printer:
•
Test paper from several manufacturers before ordering and using large quantities of pre-punched paper.
•
Paper should be punched at the paper manufacturer and not drilled into paper already packaged in a ream. Drilled
paper can cause jams when multiple sheets feed through the printer. This may result in a paper jam.
•
Pre-punched paper can include more paper dust than standard paper. Your printer may require more frequent
cleaning and feed reliability may not be as good as standard paper.
•
Weight guidelines for pre-punched paper are the same as non-punched paper.
Envelopes
Depending on the envelopes, it is possible to expect variable levels of wrinkling. It is recommended that you try a
sample first before buying large quantities of any print media. See "Loading an Envelope in the MPF" for
instructions on loading an envelope.
When printing on envelopes:
•
Use only high-quality envelopes that are designed for use in laser printers.
•
Set the print media source to the MPF. Set the paper type to Envelope, and select the correct size of envelope from
the printer driver.
•
Use envelopes made from 75 g/m2 (20 lb bond) paper. You can use up to 105 g/m2 (28 lb bond) weight for the
envelope feeder as long as the cotton content is 25 % or less. Envelopes with 100 % cotton content must not exceed
90 g/m2 (24 lb bond) weight.
•
Use only freshly unpackaged, undamaged envelopes.
•
Use envelopes that can withstand temperatures of 205 °C (401 °F) without sealing, excessive curling, wrinkling, or
releasing hazardous emissions. If you have any doubts about the envelopes you are considering, check with the
envelope supplier.
Print Media Guidelines
231
•
Adjust the guide to fit the width of the envelopes.
•
To load an envelope into the MPF, insert the envelope with the flaps closed or open and the short-edge of the
envelope facing into the printer. The print side must be facing up.
•
See "Loading an Envelope in the MPF" for instructions on loading an envelope.
•
Use one envelope size during a print job.
•
Ensure that the humidity is low because high humidity (more than 60 %) and the high printing temperatures may
seal the envelopes.
•
For best performance, do not use envelopes that:
–
Have excessive curl or twist
–
Are stuck together or damaged in any way
–
Contain windows, holes, perforations, cutouts, or embossing
–
Use metal clasps, string ties, or metal folding bars
–
Have an interlocking design
–
Have postage stamps attached
–
Have any exposed adhesive when the flap is in the sealed or closed position
–
Have nicked edges or bent corners
–
Have rough, cockle, or laid finishes
Labels
Your printer can print on many labels designed only for use with laser printers.
When selecting labels:
•
Label adhesives, face sheet (printable stock), and topcoats must be able to withstand temperatures of 205 °C (401
°F) and pressure of 25 pounds per square inch (psi).
•
Use labels that can be without sealing, excessive curling, wrinkling, or releasing hazardous emissions.
•
Do not use label sheets with a slick backing material.
CAUTION: Before buying large quantities of any print media, it is recommended that you try a sample first.
When printing on labels:
•
Use labels that can withstand temperatures of 205 °C (401 °F) without sealing, excessive curling, wrinkling, or
releasing hazardous emissions.
•
Set the paper type to Label from the printer driver.
•
Load labels in the MPF. Tray1 and the optional 550-sheet feeder do not support labels.
•
Do not load labels together with paper in the MPF.
•
Do not print within 1 mm (0.04 inches) of the die-cut.
•
Do not print within 1 mm (0.04 inches) of the edge of the label, of the perforations, or between die-cuts of the
label.
•
Do not print a label through the printer more than once.
•
Portrait orientation is preferred, especially when printing bar codes.
•
Do not use labels that have exposed adhesive.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam.
232
Print Media Guidelines
•
Do not use label sheets that have adhesive to the edge of the sheet. It is recommended that zone coating of the
adhesive is done at least 1 mm (0.04 inches) away from edges. Adhesive material contaminates your printer and
could void your warranty.
WARNING: Otherwise a jam occurs in the printer and contaminate your printer and your cartridges with adhesive. As a result,
could void your printer and cartridge warranties.
Storing Print Media
For proper print media storage, the following guidelines will help to avoid media feeding problems and uneven print
quality.
•
Store print media in an environment where the temperature is approximately 21 °C (70 °F) and the relative
humidity is 40 %.
•
Store cartons of print media on a pallet or shelf, rather than directly on the floor.
•
If you store individual packages of print media out of the original carton, ensure that they rest on a flat surface so
that the edges do not buckle or curl.
•
Do not place anything on top of the print media packages.
Identifying Print Media and Specifications
The following tables show print media information.
Supported Paper Sizes
Paper size
MPF
Tray1
Optional 550-sheet
feeder
Duplex unit
Side 1
Side 2
Side 1
Side 2
Side 1
Side 2
A4 (210 x 297 mm)
Y
Y
Y
Y
Y
Y
Y
B5 (182 x 257 mm)
Y
Y
Y
Y
Y
Y
Y
A5 (148 x 210 mm)
Y
Y
Y
Y
Y
Y
Y
Letter (8.5 x 11 in)
Y
Y
Y
Y
Y
Y
Y
Folio (8.5 x 13 in)
Y
Y
Y
Y
Y
Y
Y
Legal (8.5 x 14 in)
Y
Y
Y
Y
Y
Y
Y
Executive (7.25 x 10.5 in)
Y
Y
Y
Y
Y
Y
Y
Envelope #10 (4.125 x 9.5 in)
Y
N
N
N
N
N
N
Monarch (3.875 x 7.5 in)
Y
N
N
N
N
N
N
DL (110 x 220mm)
Y
N
N
N
N
N
N
C5 (162 x 229mm)
Y
N
N
N
N
N
N
*1, 2
Y
Y
Y
Y
Y
Y
Y
Custom
*1 Custom: width: 76.2 mm (3.0 inches) to 215.9 mm (8.5 inches) for the MPF; 148 mm (5.83 inches) to 215.9 mm (8.5 inches) for tray1 and the
optional 550-sheet feeder
length: 127.0 mm (5.0 inches) to 355.6 mm (14.00 inches) for the MPF; 210 mm (8.27 inches) to 355.6 mm (14.00 inches) for tray1
and the optional 550-sheet feeder
*2
XPS driver does not support custom size paper.
Print Media Guidelines
233
Supported Paper Types
Paper type
Plain
Covers
Coated
Label
MPF
Tray1
Optional 550-sheet
feeder
Duplex unit
Side 1
Side 2
Side 1
Side 2
Side 1
Side 2
Side 1
Side 2
Light
Y
Y
Y
Y
Y
Y
Y
N
Normal
Y
Y
Y
Y
Y
Y
Y
N
Thick
Y
Y
Y
Y
Y
Y
Y
N
Normal
Y
N
Y
N
Y
N
Y
N
Thick
Y
N
Y
N
Y
N
N
N
Normal
Y
N
Y
N
Y
N
Y
N
Thick
Y
N
Y
N
Y
N
N
N
Normal
Y
N
N
N
N
N
N
N
Light
Y
N
N
N
N
N
N
N
Envelope
Y
N
N
N
N
N
N
N
Recycled
Y
Y
Y
Y
Y
Y
Y
N
Letterhead
Y
N
Y
N
Y
N
Y
N
Preprinted
Y
N
Y
N
Y
N
Y
N
Prepunched
Y
N
Y
N
Y
N
Y
N
Color
Y
Y
Y
Y
Y
Y
Y
N
NOTE: For Plain and Label paper, you can set the paper density by selecting the Paper Density (Light or Normal) under
Maintenance from the operator panel, Tool Box, or Dell™ Printer Configuration Web Tool. Once you set the Paper Density
settings, the printer uses the settings for Plain and Label paper.
Paper Type Specifications
Weight (g/m2)
Paper type
Remarks
Plain
60–90
-
Plain Thick
80/90–105
-
Recycled
60–105
-
Labels
-
Inkjet printer paper cannot be used.
Covers
106–163
-
Covers Thick
164–216
-
Envelope
-
-
Coated
106–163
Inkjet printer paper cannot be used.
Coated Thick
164–216
Inkjet printer paper cannot be used.
Letterhead
60–90
-
Preprinted
60–90
-
Prepunched
60–90
-
Color
60–90
-
234
Print Media Guidelines
18
Loading Print Media
Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading any print media, identify the recommended print side of the print media. This information is usually
indicated on the print media package.
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
Capacity
Tray1 and the optional 550-sheet feeder (tray2) can hold:
•
550 sheets of the standard paper.
The multipurpose feeder (MPF) can hold:
•
150 sheets of the standard paper.
Print Media Dimensions
The maximum dimensions of print media that tray1 and the optional 550-sheet feeder can handle are:
•
Width — 148 mm (5.83 inches) to 215.9 mm (8.5 inches)
•
Length — 210 mm (8.27 inches) to 355.6 mm (14.00 inches)
The maximum dimensions of print media that the MPF can handle are:
•
Width — 76.2 mm (3.00 inches) to 215.9 mm (8.5 inches)
•
Length — 127 mm (5.00 inches) to 355.6 mm (14.00 inches)
Loading Print Media in Tray1 and the Optional 550-Sheet Feeder
This section describes how to load letterhead. For details about loading print media other than letterhead, see
"Loading Paper."
NOTE: To avoid paper jams, do not remove the tray while printing is in progress.
NOTE: Use only laser print media. Do not use ink jet paper in the printer.
Loading Letterhead (Pre-Printed and Pre-Punched Paper)
The pre-printed paper such as letterhead and pre-punched paper must be inserted top edge first with the print side
facing up for Dell C3760n Color Laser Printer. As for Dell C3760dn Color Laser Printer, the pre-printed paper such
as letterhead and pre-punched paper must be inserted bottom edge first with the print side facing down as shown
below.
NOTE: For Dell C3760dn Color Laser Printer, set Letterhead 2 Sided or Letterhead Duplex Mode to Enable
and Paper Type to Letterhead, Preprinted, or Prepunched from the operator panel or the printer driver even when
you print on a single side of letterhead, pre-printed, or pre-punched paper.
Loading Print Media
235
Print media source
Print side
Page orientation
Tray1 and optional 550-sheet Dell C3760n Color Laser Printer
feeder
Face up
Letterhead enters the printer
first
LET
TER
HEA
D
Dell C3760dn Color Laser Printer
Face down
LE
TT
Letterhead enters the printer
last
ER
HE
AD
MPF
Dell C3760n Color Laser Printer
Letterhead enters the printer
first
Face up
AD
HE
ER
TT
LE
236
Loading Print Media
Print media source
Print side
Dell C3760dn Color Laser Printer
Letterhead enters the printer
last
DA
T
RE
EH
TE
L
Face down
Page orientation
Loading Print Media in the MPF
1 Gently pull open the MPF cover.
2 Extend the extension tray as necessary.
Loading Print Media
237
3 Slide the width guides to the edge of the tray. The width guides should be fully extended.
4 Insert all media facing up and top edge first into the MPF.
NOTE: Do not force the print media into the MPF.
5 Slide both width guides until they rest lightly against the edge of the print media stack.
NOTE: Do not force the print media into the MPF.
6 On the operator panel, press the
(Set) button.
7 Press the
238
or
Loading Print Media
or
button until the desired paper size is highlighted, and then press the
button until the desired paper type is highlighted, and then press the
(Set) button.
Loading an Envelope in the MPF
Use the following guidelines when loading envelopes in the MPF:
CAUTION: Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can
cause damage to the printer.
NOTE: If you do not load envelopes in the MPF right after they have been removed from the packaging, they may bulge. To avoid
jams, press firmly across the whole envelopes to flatten them as shown below before loading the envelopes in the MPF.
NOTE: The maximum height (quantity) of envelopes that can be loaded in the MPF is approximately 15 mm (0.59 inches) (15
envelopes).
Envelope #10, Monarch, or DL
Load the envelopes short edge feed with the flaps closed and the print side up. Ensure that the flaps come at the left
when you face towards the printer.
Loading Print Media
239
C5
Load the envelopes short edge feed with the flaps open or closed and the print side up.
Ensure that the flaps come at the bottom with the flaps open or at the top with the flaps closed when you face
towards the printer.
Using the MPF
•
Load only one size and type of print media during a single print job.
•
To achieve the best possible print quality, use only high-quality print media that is designed for use in laser printer.
For more guidelines on print media, see "Print Media Guidelines."
•
Do not add or remove print media when there is still print media in the MPF or when the printer is printing from
the MPF. This may result in a paper jam.
•
Print media should be loaded with the recommended print side up and the top of the print media going into the
MPF first.
•
Do not place objects on the MPF. Also, avoid pressing down or apply excessive force on it.
•
The icons on the MPF show how to load the MPF with paper, and how to turn an envelope for printing.
Linking Trays
The printer automatically links the trays when you load the same size and type of print media in them. The first tray
will be utilized until the media runs out after which the next tray will be used.
NOTE: The print media should be the same size and type in each tray.
The MPF cannot be linked to any of the tray sources.
After loading the selected trays with the same size and type of print media, select the Paper Type setting in the Tray
Settings component for each source (tray).
To disable tray linking change the paper type in one of the sources (trays) to a unique value.
NOTE: If different types of print media of the same size are loaded in each tray, the printer will automatically link them if the
paper type is not specified in the printer driver properties/preferences.
240
Loading Print Media
Printing
19 Printing........................................................................................ 243
241
242
Printing
19
This chapter covers tips for printing, how to print certain information from your printer, and how to cancel a job.
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
Tips for Successful Printing
Tips on Storing Print Media
Store your print media properly. For more information, see "Storing Print Media."
Avoiding Paper Jams
CAUTION: Before buying large quantities of any print media, it is recommended that you try a sample first.
By selecting appropriate print media and loading it properly, you can avoid paper jams. See the following instructions
on loading print media:
•
"Loading Paper"
•
"Loading Print Media in the MPF"
•
"Avoiding Jams"
If you encounter a paper jam, see "Clearing Jams."
Sending a Job to Print
To support all of the printer features, use the printer driver. When you choose Print from an application, a window
representing the printer driver opens. Select the appropriate settings for the specific job that you are sending to
print. Print settings selected from the driver override the default menu settings selected from the operator panel or
Tool Box.
You may need to click Preferences from the initial Print box to see all of the available system settings you can
change. If you are not familiar with a feature in the printer driver window, open the online Help for more
information.
To print a job from a typical Microsoft® Windows® application:
1 Open the file you want to print.
2 From the File menu, select Print.
3 Verify that the correct printer is selected in the dialog box. Modify the print settings as appropriate (such as the
pages you want to print or the number of copies).
4 Click Preferences to adjust system settings that are not available from the first screen, and then click OK.
5 Click OK or Print to send the job to the selected printer.
Printing
243
Canceling a Print Job
There are several methods for canceling a job.
•
Canceling a Job From the Operator Panel
•
Canceling a Job From a Computer Running Windows
Canceling a Job From the Operator Panel
To cancel a job after it has started printing:
1 Press the
(Cancel) button.
Printing is canceled only for the current job. All the following jobs will continue to print.
Canceling a Job From a Computer Running Windows
Canceling a Job From the Taskbar
When you send a job to print, a small printer icon appears in the bottom right corner of the taskbar.
1 Double-click the printer icon.
A list of print jobs appears in the printer window.
2 Select the job you want to cancel.
3 Press the <Delete> key.
Canceling a Job From the Desktop
1 Click Start→ Devices and Printers.
For Windows XP: Click start→ Printers and Faxes.
For Windows Vista®: Click Start→ Control Panel→ Hardware and Sound→ Printers.
For Windows Server® 2008: Click Start→ Control Panel→ Printers.
For Windows Server 2008 R2: Click Start→ Devices and Printers.
For Windows 8: Under Desktop mode, right-click the bottom left corner of the screen, and then click Control
Panel → Hardware and Sound → Devices and Printers.
For Windows Server 2012: Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware → Devices and Printers.
A list of available printers appears.
2 Right-click the printer that you selected when you sent the job for print, and then select See what's printing.
3 Select the printer driver.
A list of print jobs appears in the printer window.
4 Select the job you want to cancel.
5 Press the <Delete> key.
244
Printing
Duplex Printing
Duplex printing (or two-sided printing) allows you to print on both sides of a sheet of paper. For sizes that are
acceptable for duplex printing, see "Supported Paper Sizes."
Duplex Printing With Duplex Unit (Dell C3760dn Color Laser Printer Only)
1 Click Start→ Devices and Printers.
For Windows XP: Click start→ Printers and Faxes.
For Windows Vista: Click Start→ Control Panel→ Hardware and Sound→ Printers.
For Windows Server 2008: Click Start→ Control Panel→ Printers.
For Windows Server 2008 R2: Click Start→ Devices and Printers.
For Windows 8: Under Desktop mode, right-click the bottom left corner of the screen, and then click Control
Panel → Hardware and Sound → Devices and Printers.
For Windows Server 2012: Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware → Devices and Printers.
2 Right-click the printer and select Printing Preferences.
The General tab appears.
3 From Paper Source, select the paper tray.
For PCL driver:
Select from Auto, Tray1, Tray2, or MPF.
For PS driver:
Select from Automatically Select, Tray1, Tray2, or MPF.
4 From Duplex, select Flip on Short Edge or Flip on Long Edge.
NOTE: For details on the Flip on Short Edge and Flip on Long Edge options, see "Flip on Short Edge" and "Flip on Long Edge."
5 Click OK.
Duplex Printing Without Duplex Unit (Dell C3760n Color Laser Printer Only)
Manual duplex printing (or two-sided printing) allows you to manually print on both sides of the paper. For
information on the paper sizes that support manual duplex printing, see "Supported Paper Sizes."
NOTE: You can use the manual duplex feature using PCL 6 printer driver.
NOTE: To use the manual duplex feature, select Paper Source other than Auto.
1 Click Start→Devices and Printers.
For Windows XP: Click start→ Printers and Faxes.
For Windows Vista: Click Start→ Control Panel→ Hardware and Sound→ Printers.
For Windows Server 2008: Click Start→ Control Panel→ Printers.
For Windows Server 2008 R2: Click Start→ Devices and Printers.
For Windows 8: Under Desktop mode, right-click the bottom left corner of the screen, and then click Control
Panel → Hardware and Sound → Devices and Printers.
For Windows Server 2012: Under Desktop mode, right-click the bottom left corner of the screen, and then click
Control Panel → Hardware → Devices and Printers.
Printing
245
2 Right-click the printer and select Printing Preferences.
The General tab appears.
3 From Paper Source, select Tray1, Tray2, or MPF.
4 From Duplex, select Flip on Short Edge or Flip on Long Edge.
NOTE: For details on the Flip on Short Edge and Flip on Long Edge options, see "Flip on Short Edge" and "Flip on Long Edge."
5 Click OK.
When you click the Print button on your printer driver, a window that shows the instructions for manual duplex
printing appears and the even-numbered pages of your document are printed from the printer. If your document
consists of six pages, its even-numbered pages are printed in the order of page 6, 4, and then 2. After the
even-numbered pages are printed, a message Insert Output to Tray 1 (Tray 2 or MPF) (071-920,
072-920, or 075-920) appears on the operator panel.
6 Remove the stack of output from the output tray. Load the stack back into the tray without turning it over (with
the blank side face up).
7 A message Press
to Continue Printing (071-921, 072-921, or 075-921) appears on the
(Set) button.
operator panel. Press the
The odd-numbered pages are printed in the order of page 1, 3, and then 5.
NOTE: You cannot duplex print mix-sized documents.
Using Booklet Print (Dell C3760n and Dell C3760dn Models)
To use the booklet print feature, select the Enable check box of the Booklet Printing in the Layout tab.
NOTE: When the XPS or PS driver is used, booklet print is not available.
NOTE: When using the Booklet Print feature on the Dell C3760n Color Laser Printer, Auto in Paper Source is not available.
NOTE: You must select Flip on Long Edge in the Duplex when using the Booklet Print feature.
246
Printing
Flip on Long Edge
Assumes binding along the long edge of the page (left edge for portrait orientation and top edge
for landscape orientation). The following illustration shows long-edge binding for portrait and
landscape pages:
Portrait
Flip on Short Edge
Landscape
Assumes binding along the short edge of the page (top edge for portrait orientation and left
edge for landscape orientation). The following illustration shows short-edge binding for portrait
and landscape pages:
Portrait
Landscape
Using the Stored Print Feature
When you send a job to the printer, you can specify in the printer driver to store the job in the memory or hard disk.
When you are ready to print the job, go to the printer and use the operator panel to identify which job in the
memory or hard disk you want to print.
NOTE: The data in the memory is cleared when the printer is turned off. The data on the optional hard disk is not cleared even
when the printer is turned off.
NOTE: Stored Print feature is available when:
•
The optional 512MB memory module is installed.
•
The RAM disk is enabled in the printer menu.
•
RAM Disk is set to Available in the printer driver.
OR
•
The optional hard disk is installed.
Printing
247
•
Hard Disk is set to Available in the printer driver.
Overview
The stored printing feature includes the following job types.
Secure Print
You can temporarily store print jobs secured with a password in the memory or hard disk. Users with the password
can print them from the operator panel. This feature can be used to print confidential documents. A stored print job
will be deleted after you print it or at a designated time.
Send confidential data.
Enter the password from
the operator panel.
Print data.
Confidential
Data is deleted at a
designated time.
Private Mail Box Print
You can store print jobs secured with a password in the memory or hard disk. Users with the password can print them
at a more convenient time from the operator panel. This feature can be used to print confidential documents. The
stored jobs remain in the memory or hard disk until you delete them from the operator panel.
Send data.
Enter the password from
the operator panel.
Print data.
Public Mail Box Print
You can store print jobs without a password in the memory or hard disk. Any user can print them at a more
convenient time from the operator panel. The stored jobs remain in the memory or hard disk until you delete them
from the operator panel.
Print data.
Send data.
248
Printing
Proof Print
The collated print job is stored in the memory or hard disk, but a single copy is printed automatically so you can
check the print result. If you do not have problems with the print result, you can choose to print more copies. This
prevents large number of misprinted copies from being printed at one time.
One set is
printed.
Send data.
Check if the print result
is OK.
Print the rest of sets
from the operator panel.
The difference between each of the job types are listed below. If you want to set the password for confidentiality,
store the jobs in the Secure Print or Private Mail Box Print.
Job types
Password
Secure Print
Y
Differences
• The stored jobs will be deleted at a designated time.
• You cannot specify the quantity of copies from the operator panel. The
quantity of copies depends on the number you specified on the printer
driver.
Private Mail Box Print
Y
• The stored jobs remain until you delete them from the operator panel.
Public Mail Box Print
N
• You can specify the quantity of copies from the operator panel.
Proof Print
N
• The print job is set to collate.
• A single copy is printed automatically.
• The stored jobs remain until you delete them from the operator panel.
• You can specify the quantity of copies from the operator panel.
NOTE: If a print job is too large for the memory available, the printer may display an error message.
Procedures for Printing Stored Print
NOTE: The stored print feature is available when using the PCL or PS driver.
When you select a job type in the printer driver, the job will be stored in the memory or hard disk until you request
to print it from the operator panel. The following are procedures for storing and printing jobs.
Storing Print Jobs
To use the stored print feature, you need to select a job type other than Normal Print in the General tab of the
printer driver. The job will be stored in the memory or hard disk until you request to print it from the operator panel.
NOTE: Secure Print and Private Mail Box Print require specifying a password for confidentiality.
NOTE: If a document name is not assigned to your print job in the printer driver, the job's name will be identified using the
printer's time and date of submission to distinguish it from other jobs you have stored under your name.
Printing the Stored Jobs
1 Press the
(Menu) button.
2 Press the
button until Print Menu is highlighted, and then press the
3 Press the
button until the desired job type is highlighted, and then press the
(Set) button.
(Set) button.
Printing
249
4 Press the
button until the desired user ID is highlighted, and then press the
(Set) button.
NOTE: Secure Print and Private Mail Box Print require specifying a password for confidentiality. If you select Public
Mail Box Print or Proof Print, proceed to step 6.
5 Enter the password using the number pad, and then press the
(Set) button.
For details about specifying the password, see "Specifying your password on the operator panel (Secure
Print/Private Mail Box Print)."
6 Press the
button until the desired document is highlighted, and then press the
7 Press the
button until the desired print menu is highlighted, and then press the
(Set) button.
(Set) button.
NOTE: If you want to keep the data in the memory or hard disk for the time being, select Print. For Secure Print, only
Print and Delete is available.
8 Press the
button until the desired quantity menu is highlighted, and then press the
(Set) button.
NOTE: If you select Input Number of Copies, enter the number using the number pad, and then press the
(Set) button.
The stored document will be printed.
Specifying your password on the operator panel (Secure Print/Private Mail Box Print)
When you select Secure Print or Private Mail Box from Print Menu, a screen to enter the password
appears after selecting your user ID.
Use the number pad to enter the numeric password you specified in the printer driver. The password you entered will
appear as asterisks (*******) to ensure confidentiality.
If you enter an invalid password, the message Wrong Password Re-enter appears. Wait 3 seconds, or press the
(Set) button or
(Cancel) button to return to the screen for entering the password.
When you enter a valid password, you have access to all print jobs matching the user ID and password you entered.
The print jobs matching the password you entered appear on the screen. You can then choose to print or delete jobs
matching the password you entered. (See "Printing the Stored Jobs" for more information.)
Deleting Stored Jobs
With Secure Print, a job that has been stored will be deleted after printing or deleted at a designated time entered on
the operator panel.
For other jobs, these jobs remain stored until you delete them from the operator panel.
Printing from USB Memory
The USB Direct Print feature allows you to print files stored in a USB memory by operating from the operator panel.
CAUTION: To prevent damage to your printer, do not connect any device other than USB memory to the front USB port of the
printer.
CAUTION: Do not remove the USB memory from the front USB port until the printer has finished printing.
NOTE: If the Function Enabled setting for USB Direct Print is set to On (Password), you need to enter the four
digit password to use the print function. If the Function Enabled setting for USB Direct Print is set to Off, the print
function is disabled. For details, see "Function Enabled."
The front USB port of the printer is designed for USB 2.0 devices. You must use only an authorized USB memory
with an A plug type connector. Use only a metal shielded USB memory.
250
Printing
A plug type
Supported File Formats
Files in the following file formats can be printed directly from a USB memory.
•
PDF
•
TIFF
•
JPEG
Inserting and Removing a USB Memory
You can insert the USB memory before printing.
Before removing the USB memory, ensure that the printer is not accessing the USB memory.
CAUTION: If you remove the USB memory while the printer is accessing, the data in the USB memory or the USB memory
device itself may be destroyed.
Printing a File in a USB Memory
NOTE: Color printing is secured with a password if the Function Enabled setting for USB Direct Print is set to
On (Color Password). If you set Output Color to Full Color and the Function Enabled setting for USB
Direct Print to On (Color Password), you will need to enter the four digit password after selecting Print
Start.
NOTE: Depending on how the PDF, TIFF, or JPEG file is created, the file may not be printed directly from a USB memory. In this
case, open the file on a computer, and print using the printer driver.
1 Insert a USB memory to the front USB port of the printer.
For details about inserting a USB memory, see "Inserting and Removing a USB Memory."
If a USB memory is already inserted into the front USB port of the printer:
a
Press the
(Menu) button.
b
Press the
button until Print Menu is highlighted, and then press the
c
Press the
button until USB Direct Print is highlighted.
2 Ensure that USB Direct Print is highlighted, and then press the
(Set) button.
(Set) button.
Printing
251
3 Press the
button until the desired file is highlighted, and then press the
(Set) button.
NOTE: Only the following characters are displayed on the LCD panel:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 $ % ’ ‘ - @ {} ~ ! # ( ) & _ ^
4 Specify print options such as Output Color, Select Tray, 2 Sided Printing, Multiple-Up,
Collation, and PDF Password. For details, see "USB Direct Print."
5 Press the
or
button until Print Start is highlighted, and then press the
6 Ensure that Yes is highlighted, and then press the
(Set) button.
(Set) button.
Printing With Web Services on Devices (WSD)
This section provides information for network printing with WSD, the protocol of Microsoft for Windows Vista,
Windows 7, Windows 8, Windows Server 2008, Windows Server 2008 R2, and Windows Server 2012.
Adding Roles of Printer Services
When you use Windows Server 2008, Windows Server 2008 R2 or Windows Server 2012, you need to add the roles
of print services to the Windows Server 2008, Windows Server 2008 R2 or Windows Server 2012 client.
For Windows Server 2008:
1 Click Start→ Administrative Tools→ Server Manager.
2 Select Add Roles from the Action menu.
3 Check the Print Services check box on the Server Roles window in the Add Roles Wizard, and then click Next.
4 Check the Print Server check box, and then click Next.
5 Click Install.
For Windows Server 2008 R2:
1 Click Start→ Administrative Tools→ Server Manager.
2 Select Add Roles from the Action menu.
3 Check the Print and Document Services check box on the Server Roles window in the Add Roles Wizard, and
then click Next.
4 Click Next.
5 Check the Print Server check box, and then click Next.
6 Click Install.
For Windows Server 2012:
1 Click Server Manager of the Start screen.
2 Select Add Roles and Features from the Manage menu.
3 Click Next on the Before You Begin window → Select installation type on the Installation Type window → Select
destination server on the Server Selection window in the Add Roles and Features Wizard.
4 Check the Print and Document Services check box on the Server Roles window, and then click Next.
5 Select features on the Features window → Confirm installation selections on the Confirmation window.
6 Click Install.
252
Printing
Printer Setup
You can install your new printer on the network using the Software and Documentation disc that shipped with your
printer, or using Microsoft Windows’ Add Printer wizard.
Installing a Printer Driver Using the Add Printer Wizard
1 Click Start→ Devices and Printers (Start→ Control Panel→ Hardware and Sound→ Printers for Windows Vista
and Windows Server 2008).
For Windows 8 and Windows Server 2012:
Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel → Hardware
and Sound (Hardware for Windows Server 2012)→ Devices and Printers.
2 Click Add a printer to launch the Add Printer wizard.
3 Select Add a network, wireless or Bluetooth printer.
4 In the list of available printers, select the one you want to use, and then click Next.
NOTE: In the list of available printers, the WSD printer is displayed in the form of http://IP address/ws/.
NOTE: If no WSD printer is displayed in the list, enter the printer's IP address manually to create a WSD printer. To enter
the printer's IP address manually, follow the instructions below.
For Windows Server 2008 R2, to create a WSD printer, you must be a member of Administrators group.
1. Click The printer that I want isn't listed.
2. Select Add a printer using a TCP/IP address or hostname and click Next.
3. Select Web Services Device from Device type.
4. Enter the printer's IP address in the Hostname or IP address text box and click Next.
NOTE: Before installing the driver using the Add Printer wizard on Windows Server 2008 R2 or Windows 7, perform one of
the following:
•
Establish the Internet connection so that Windows Update can scan your computer.
•
Add the printer driver to your computer.
5 If prompted, install the printer driver on your computer. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.
6 Complete the additional steps in the wizard, and then click Finish.
7 Print a test page to verify print installation.
a
Click Start→ Devices and Printers (Start→ Control Panel→ Hardware and Sound→ Printers for Windows
Vista and Windows Server 2008).
For Windows 8 and Windows Server 2012:
Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel →
Hardware and Sound (Hardware for Windows Server 2012)→ Devices and Printers.
b
Right-click the printer you just created, and then click Printer properties (Properties for Windows Vista and
Windows Server 2008).
c
On the General tab, click Print Test Page. When a test page prints successfully, installation is complete.
Printing
253
Printing With AirPrint
This section provides information for printing with AirPrint. AirPrint allows you to print through a
network with iPad (all models), iPhone (3GS or later), and iPod touch (3rd generation or later) running
the latest version of iOS. AirPrint also allows you to accomplish basic network printing with Macintosh
(Mac OS X 10.7 or later) without installing additional drivers.
Setting Up AirPrint on Your Printer
To use AirPrint, Bonjour (mDNS) and IPP protocols are required on your printer. Make sure that Bonjour(mDNS)
and IPP are set to Enable on the operator panel menu. See "Protocols" for details. Bonjour(mDNS) and IPP can
also be enabled by clicking Turn on AirPrint from the Dell™ Printer Configuration Web Tool. Follow the procedure
below to configure the environment settings for AirPrint from the Dell Printer Configuration Web Tool.
1 Ensure that the printer is connected to the network.
2 Launch the Dell Printer Configuration Web Tool by entering the IP address of the printer in your web browser.
For more information, see "Setting Up the Dell Printer Configuration Web Tool" and "Starting the Dell Printer
Configuration Web Tool."
3 When the Dell Printer Configuration Web Tool opens, go to the pages in the Print Server Settings tab. Click
Turn on AirPrint in Enable AirPrint. The printer is ready for AirPrint.
NOTE: If the Turn on AirPrint button is not active, it means that both Bonjour (mDNS) and IPP are already set to
Enable on the operator panel menu and the printer is ready for AirPrint.
Printing via AirPrint
The following procedure uses the iPhone running iOS5 as an example.
1 Open your email, photo, web page, or document you want to print.
2 Tap the action icon
.
3 Tap Print.
4 Select your printer and set printer options.
5 Tap Print.
NOTE: To cancel the printing job, double click the Home button, tap the Print Center icon
job in the queue, select the job you want to cancel, then tap Cancel Printing.
. If there are more than one
Printing With Google Cloud Print™
This section provides information for Google Cloud Print service with your smart phone, tablet, or any other device.
By registering the printer to your GoogleTM account, you can use the Google Cloud Print service to print from
various devices connected to the Internet. You can print documents, photos or e-mails using the Google ChromeTM
browser or applications such as Google DriveTM on your mobile device. For more information about Google Cloud
Print, visit the Google web site.
Preparing to Use the Printer with Google Cloud Print
To use Google Cloud Print, you need to prepare the following in advance:
•
Connect the printer to a network that has access to the Internet.
NOTE: Google Cloud Print supports only IPv4 connection.
NOTE: If the printer is connected to a network that uses a proxy server, you need to specify the settings in Proxy Server
from the Dell Printer Configuration Web Tool. For more information, see "Proxy Server."
•
254
Acquire a Google account and a GmailTM address.
Printing
•
Set Google Cloud Print to Enable from the operator panel menu, or set Google Cloud Print to On from
the Dell Printer Configuration Web Tool.
When using the operator panel
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until Protocols is highlighted, and then press the
5 Press the
button until Google Cloud Print is highlighted, and then press the
6 Press the
button until Enable is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
7 Turn off the printer, and turn it on again to apply the settings.
When using the Dell Printer Configuration Web Tool
1 Launch the Dell Printer Configuration Web Tool by entering IP address of the printer in your web browser. For
more information, see "Setting Up the Dell Printer Configuration Web Tool" and "Starting the Dell Printer
Configuration Web Tool."
2 When the Dell Printer Configuration Web Tool opens, go to the pages in the Print Server Settings tab. Click Port
Settings. In Port Status, select the On check box for Google Cloud Print.
Registering the Printer to Your Google Account
To register the printer to your Google account, follow the procedure below.
1 Launch the Dell Printer Configuration Web Tool by entering IP address of the printer in your web browser. For
more information, see "Setting Up the Dell Printer Configuration Web Tool" and "Starting the Dell Printer
Configuration Web Tool."
2 When the Dell Printer Configuration Web Tool opens, go to the pages in the Print Server Settings tab. Click
Register This Device to Google Cloud Print in Google Cloud Print. A sheet with a URL for the Google Cloud
Print printer registration web site is printed.
3 From the web browser of your computer, visit the Google web site and sign in with your Google account. Visit the
Google Cloud Print registration web site by entering the URL on the printout into your web browser. You can also
visit the site by scanning the QR code with your mobile device.
4 On the Google Cloud Print registration web site, click Finish printer registration.
5 Click Manage your printers. Your printer will be listed in the Printers list and will be ready for use with the Google
Cloud Print service.
Printing via Google Cloud Print
The printing procedure varies depending on the application or the device you are using. You can see the application
list that supports Google Cloud Print service on the Google web site.
Printing From an Application on a Mobile Device
The following procedure uses the Google Drive application on an Android mobile device as an example.
1 Install the Google Drive application on your mobile device.
NOTE: You can download the application from Google Play.
2 Access the Google Drive application from your mobile device and tap
3 Tap
to select the document.
and then tap Print.
4 Select your printer from the list.
Printing
255
5 Select printer options and then tap Print.
Printing From Google Chrome
The following procedure uses the Google Chrome browser on a Windows PC as an example.
1 Open the Google Chrome browser.
2 Open the web page or e-mail that you want to print.
3 Click
or
click Print.
(varies depending on the version of the Google Chrome browser) in the top right corner and then
4 Click Change in the Destination area.
5 Choose your printer from the Google Cloud Print area.
6 Click Print.
Printing a Report Page
You can print a variety of settings for your printer including printer settings, panel setting, and font list. For details about
how to print reports or lists, see "Report / List."
Printer Settings
You can change most of the print settings from the application you are printing from. If your printer is attached to
the network, you can also change settings from the Dell Printer Configuration Web Tool. To launch the Dell
Printer Configuration Web Tool, type the printer's IP address in your web browser. To find your printer's IP address,
see "Verifying the IP Settings."
Settings from the application update the default system settings for the printer. Settings from the printer driver only
apply to the job that you are currently sending to the printer.
If you cannot change a setting from the application, use the operator panel, Tool Box or the Dell Printer
Configuration Web Tool. Changing a system setting from the operator panel, Tool Box or from the Dell Printer
Configuration Web Tool makes that setting the user default.
You can verify the detailed system settings by printing a printer settings report. For details about how to print a
printer settings report, see "Report / List."
You can reset settings to their default values from the Tool Box or the operator panel. For details, see "When Using
the Tool Box" or "When Using the Operator Panel."
Using the Operator Panel to Change the Printer Settings
You can select menu items and corresponding values from the operator panel.
When you first browse through the menus from the operator panel, you see some menu items are highlighted.
These highlighted items are the factory default and original system settings.
NOTE: Factory defaults may vary for different countries.
When you select a new setting from the operator panel, the item selected is highlighted to identify it as the current
user default menu setting.
These settings are active until new ones are selected or the factory defaults are restored.
Driver settings may override changes previously made and may require you to change the operator panel defaults.
Using the Dell Printer Configuration Web Tool to Change the Printer Settings
If your printer is connected to the network, you can change the printer settings from your web browser. If you are a
network administrator, you can clone the system settings of one printer to one or all the printers on the network.
256
Printing
Type the IP address of your printer in your web browser. Choose Printer Settings from the topics list. From the
Printer Settings tab, select the System Settings to change the printer settings.
To change the paper type and size, choose Tray Settings from the topics list. To change the ColorTrack settings,
choose Print Volume from the topics list, and then select the Dell ColorTrack tab.
To copy your system settings to another printer on the network, choose Copy Printer Settings from the topics list,
and then type the other printer's IP address.
If you do not know your printer's IP address, see the printer settings report or display the TCP/IP settings. For details
about how to find your printer's IP address, see "Verifying the IP Settings."
Printing
257
258
Printing
Know Your Printer
20 Understanding Your Printer Software ................................... 261
21 Printing Using ColorTrack (External Authentication) .......... 273
22 Using Digital Certificates ......................................................... 281
23 Understanding Fonts ................................................................ 293
24 Understanding Printer Messages .......................................... 301
25 Specifications............................................................................ 307
259
260
Understanding Your Printer Software
20
Use the Software and Documentation disc that shipped with your printer to install a combination of software
programs, depending on your operating system.
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
Printer Status Window
The Printer Status window alerts you when there is a warning or when an error occurs, for example, when a paper
jam occurs or toner is running low.
By default, the Printer Status window launches only when an error occurs. When an error occurs, the error message
appears on the Printer Status window. You can set the Printer Status window to always launch when printing in
Printing Status Window Properties.
You can also check toner level, quantity of paper remaining or the configuration of options for the printer.
Status Monitor Console
Use the Status Monitor Console to manage multiple instances of the Status Window for a particular printer.
Select a printer from the list view (or Printer Selection) by clicking its name to open a Status Window for a
particular printer.
Dell Supplies Management System
You can launch the Dell Supplies Management System dialog box from the All Programs menu or the desktop icon.
You can order consumables by phone or from the web.
1 Click Start→ All Programs→ Dell Printers→ Additional Color Laser Software→ Dell Supplies Management
System.
The Dell Supplies Management System window appears.
2 Select your printer from the Select Printer Model list.
3 If you are ordering from the web:
a
Select a URL from the Select Reorder URL list.
b
Click Visit Dell printer supplies ordering web site.
NOTE: When you cannot get information from the printer automatically by two-way communication, a window prompting
you to type the Service Tag appears. Type the Service Tag of your Dell printer in the field provided.
Your Service Tag is located inside the front cover of your printer.
4 If you order by phone, call the number that appears in the Order by Phone section.
User Setup Disk Creating Tool
The User Setup Disk Creating Tool program located in the MakeDisk folder of the Utilities folder on the Software
and Documentation disc and the printer drivers located on the Software and Documentation disc are used to create
driver installation packages that contain custom driver settings. A driver installation package can contain a group of
saved printer driver settings and other data for things such as:
•
Print orientation and Multiple Up (document settings)
•
Watermarks
•
Font references
Understanding Your Printer Software
261
If you want to install the printer driver with the same settings on multiple computers running the same operating
system, create a setup disk in a floppy disk or in a server on the network. Using the setup disk that you have created
will reduce the amount of work required when installing the printer driver.
•
Install the printer driver in the computer on which the setup disk is to be created.
•
The setup disk can only be used on the operating system on which the disk was created or computers running the
same operating system. Create a separate setup disk for each of the operating systems.
Software Update
The firmware and/or driver updates can be downloaded from the Dell Support web site located at support.dell.com.
Printer Utility Software
You can open the Status Window, Tool Box, Updater, and Troubleshooting using the Quick Launch Utility window.
NOTE: Quick Launch Utility is only supported on Microsoft® Windows®.
To use the Quick Launch Utility, select to install the Quick Launch Utility when you install the Dell software.
To install the Dell software, follow the instructions below.
1 Insert the Software and Documentation disc into your computer and click setup_assist.exe to start Easy Setup
Navigator.
2 Click Installing Driver and Software.
3 Follow the on-screen instructions.
To open the Quick Launch Utility window:
1 Click Start→ All Programs→ Dell Printers→ Additional Color Laser Software→ Quick Launch Utility.
The Quick Launch Utility window provides four buttons: Status Window, Tool Box, Updater, and Troubleshooting.
To exit the Quick Launch Utility window:
1 Click the Close (x) button at the top-right of the window.
For details, click Help of each application.
Status Window
The Status Window button opens the Printer Status window. For more information about using Status Window,
refer to "Printer Status Window."
Tool Box
The Tool Box button opens the Tool Box. For more information about using Tool Box, refer to "Understanding the
Tool Box Menus."
262
Understanding Your Printer Software
Updater
The Updater button updates the Dell software and printer firmware.
Troubleshooting
The Troubleshooting button opens the Troubleshooting Guide, which allows you to solve problems by yourself.
Status Monitor Widget for Macintosh
Status Monitor Widget is a printer utility that promotes efficient use of the printer through the exchange of
information between the Macintosh and the printer.
Status Monitor Widget Feature
•
Monitoring Dell Printers
Allows you to check the status of Dell printers currently connected to your Macintosh
•
Receiving Alerts
Alerts you to problems, such as paper jams or low toner
•
Ordering Supplies
Allows you to access the web site to order supplies
Before Installing the Status Monitor Widget
Operating systems
•
Mac OS X 10.4.11
•
Mac OS X 10.5
•
Mac OS X 10.6
•
Mac OS X 10.7
•
Mac OS X 10.8
Network protocols and interfaces
•
LPR
•
Socket 9100
•
Bonjour
•
USB 2.0 and 1.1 (When connecting with multiple printers of the same model via USB cables, only the printer
recognized first can be monitored in the Status Monitor Widget.)
Installing the Status Monitor Widget
1 Double-click the Status Monitor Installer icon in the Finder window.
2 Follow the on-screen instructions.
When the Install Succeeded screen appears, the installation is complete.
NOTE: Entering the administrative login name and password are required during the installation process.
Understanding Your Printer Software
263
Opening and Closing the Status Monitor Widget
Opening the Status Monitor Widget
1 Click the Dashboard icon in the Dock to launch Dashboard.
2 Click the Plus (+) sign to display the Widget Bar.
3 Click the icon of Status Monitor in the Widget Bar. The Printer Status window appears.
NOTE: If the message Select a printer is displayed, select your printer in Preferences. (For more information on
Preferences, see "Preferences.")
Closing the Status Monitor Widget
1 Click the Close (x) button in the upper-left corner of the Printer Status window.
Printer Status Window
When the Status Monitor Widget is activated, the Printer Status window appears on Dashboard.
Printer Status Message Area
Displays a message of the current printer status.
NOTE: The Status Monitor Widget automatically obtains the printer information at the updated interval that can be specified in
Preferences. Also, the printer status is refreshed when Dashboard is launched or Preferences is closed.
NOTE: If the Status Monitor Widget receives no response from the printer, the message Cannot get printer information is
displayed.
NOTE: When the printer is connected via USB cable, you cannot check the status of the printer during a print job.
264
Understanding Your Printer Software
Printer Status Image Area
Displays the image of printer condition.
•
Estimated Toner Level image
Displays the estimated toner level of each color if the printer is functioning properly.
NOTE: If the utility does not receive a response from the printer, the Unknown toner image is displayed.
•
Printer error image
Displays an indication image when an error occurs.
An error has occurred and the printer cannot be used.
Order Supplies button
Click this button to display the Order window.
To hide the Order window, click Order Supplies again.
Info (i) button
Click this button to open Preferences.
NOTE: The info (i) button appears on the lower-right corner of the window when the cursor is over the Printer Status window.
The info (i) button is a standard used across all widgets.
Order Window
This window provides you with the information for ordering printer supplies by telephone or from the web site.
To open the Order window:
1 Click Order Supplies in the Printer Status window.
The Order window appears.
NOTE: The Order window appears when low toner is detected.
Understanding Your Printer Software
265
Order Online
•
Visit Dell printer supplies ordering web site hyperlink
Click the Visit Dell printer supplies ordering web site hyperlink to access the web site for ordering Dell printer
supplies.
•
URL list
Displays a list of available URLs where you can order Dell printer supplies.
Select a URL address to use when the Visit Dell printer supplies ordering web site hyperlink is clicked.
Order By Phone
•
Phone number list
Displays a list of available phone numbers that you can call to order Dell printer supplies.
•
Update phone contacts when rebooting check box
Select this check box to regularly update the phone number list.
Dell and the Environment
Click the hyperlink to access the web site about recycling.
Preferences
To open Preferences:
1 Click the info (i) button in the Printer Status window.
Preferences appears.
NOTE: The info (i) button appears on the lower-right corner of the window when the cursor is over the Printer Status
window. The info (i) button is a standard used across all widgets.
Printer
Displays a list of available printer names in the pull down menu. The first printer displayed in this list is set as
default.
Status Update Interval
You can specify the update interval of the printer status. By default, it is set to obtain the printer information every
10 seconds. It can be set from 0 second to 600 seconds.
SNMP Community Name
You can change the SNMP (Simple Network Management Protocol) community name if using default community
name (public). Up to 31 characters can be entered.
266
Understanding Your Printer Software
Service Tag button
Click this button to obtain the service tag.
NOTE: You cannot retrieve the service tag when the printer is connected via USB cable.
done button
Click this button to return to the Printer Status window.
Status Monitor Console for Linux
Status Monitor Console is a printer utility that promotes efficient use of the printer through the exchange of
information between the Linux and the printer.
Status Monitor Console Feature
•
Monitoring Dell Printers
Allows you to check the status of Dell printers currently connected to your Linux.
•
Receiving Alerts
Alerts you to problems, such as paper jams or low toner.
•
Ordering Supplies
Allows you to access the web site to order supplies.
Before Installing the Status Monitor Console
NOTE: The Status Monitor Console requires the following modules installed.
- Python, PyGTK, Net-SNMP, cups-libs, and xdg-open
Please confirm that these modules are installed before you install the Status Monitor Console.
NOTE: The Status Monitor Console is available when the printer is connected to a network (LPR or Socket 9100). USB
connection is not supported.
Distributions
•
Red Hat® Enterprise Linux® 5 Desktop
•
Red Hat Enterprise Linux 6 Desktop
•
SUSE® Linux Enterprise Desktop 10
•
SUSE Linux Enterprise Desktop 11
Printing system
•
CUPS (Common Unix Printing System)
Installing the Status Monitor Console
1 Activate the terminal, and log in as a super user.
2 Type the following rpm command in the terminal window.
# rpm -ivh (Type the package file name)
Understanding Your Printer Software
267
Starting the Status Monitor Console
1 Click Dell Printers→ Status Monitor Console
The Printer Selection window appears.
For more information on Printer Selection window, see "Printer Selection Window."
2 Select your printer.
The Printer Status window appears.
For more information on Printer Status window, see "Printer Status Window."
•
You can order supplies from the Dell Supplies Management System window. See "Dell Supplies Management
System Window."
Printer Selection Window
Printers list
All the printers registered in the CUPS (Common UNIX Printing System) are displayed in a list.
•
Status icons:
Ready
Unknown/Offline/Toner Low/Paper Low
Door Open/Paper Jam/No Toner/Out Of Paper
Settings button
Click this button to open the Settings window.
Details button
Click this button to open the Printer Status window. If a non-supported printer is selected, it opens the Dell Printer
Configuration Web Tool. For details on the Dell Printer Configuration Web Tool, see "Dell™ Printer Configuration
Web Tool."
Refresh button
Click this button to update the information of printers.
Close button
Click this button to close the Printer Selection window.
268
Understanding Your Printer Software
Printer Status Window
When the printer is specified in the Printer Selection window, the Printer Status window appears.
Printer Status Message Area
Displays a message of the current printer status.
NOTE: The Status Monitor Console automatically obtains the printer information at the updated interval that can be specified in
the Settings window. Also, the printer status is refreshed when the Refresh is clicked.
NOTE: If the Status Monitor Console receives no response from the printer, the message Cannot get printer information is
displayed.
Printer Status Image Area
•
Current Toner Status icons
Displays icons of the current status of each toner.
The toner level is more than 30%.
The toner level is less than 29%.
The toner level is less than 9%.
The toner level is unknown.
•
Estimated Toner Level images
Keeps you informed about the amount of toner that remains for each color.
Toner Alert
Displays an alert message when any remaining toner is low, empty, or unknown.
Order Online
•
Order Supplies Online button
Click this button to access the web site for ordering Dell printer supplies. This button appears when the amount
of toners becomes less than 30%.
Refresh button
Click this button to update the status of the printer.
Close button
Click this button to close the Printer Status window.
Understanding Your Printer Software
269
Dell Supplies Management System Window
This window provides you with the information for ordering printer supplies by telephone or from the web site.
To open the Dell Supplies Management System window:
1 Click Order Supplies Online button in the Printer Status window.
OR
Click Dell Printers→ Dell Supplies Management System.
Select Printer Model
Select your printer model name.
Order Online
•
Order Supplies Online button
•
When the Regular URL is selected in the Select Reorder URL:
Click this button to open the Service Tag window.
•
When the Premier URL is selected in the Select Reorder URL:
Click this button to open the procurement and support web site.
•
Select Reorder URL
Displays a list of available URLs where you can order Dell printer supplies. Select a URL address to use when the
Order Supplies Online button is clicked.
•
Regular URL: http://accessories.us.dell.com/sna/printerseg.aspx
•
Premier URL: http://premier.dell.com
Order by Phone
•
To order Dell printer supplies by phone, call the following
Select your country with phone number from the list, and call the displayed telephone number to order supplies.
•
Update phone contacts when rebooting check box
Select this check box to regularly update the phone number list.
270
Understanding Your Printer Software
Dell and the Environment
Click the hyperlink to access the web site about recycling.
Close button
Click this button to close the Dell Supplies Management System window.
Service Tag Window
1 Enter the Dell printer service tag.
NOTE: For information on the service tag, see "Express Service Code and Service Tag."
Settings Window
To open the Settings window:
1 Click Settings in the Printer Selection window.
The Settings window appears.
Update of status
•
Printer Status is regularly updated check box
Select the check box to enable/disable the printer status to be updated by the specified interval.
•
Update interval text box
Specify the update interval of the printer status.
Port Number Settings
•
Port Number
Specify the port number in the Port Number text box to open the setting page of your printer in a web browser.
Understanding Your Printer Software
271
Protocol Settings - SNMP
•
Community Name
Enter the Community name of SNMP in the Community Name text box.
Order URL
•
Select Reorder URL
The selected URL address is set as default web site for the Select Reorder URL in the Dell Supplies Management
System window.
272
Understanding Your Printer Software
21
Printing Using ColorTrack (External Authentication)
With ColorTrack, you can restrict the number of pages that can be printed per user, specify the users who can print
in color, and restrict the users who can access the printer, based on the user information registered on the external
authentication server or the printer.
To print using ColorTrack, you must set ColorTrack Settings and the printer driver. Also, you must set the external
server with ColorTrack for using an external authentication server. To set the external server, consult your system
administrator.
NOTE: To restrict color printing when ColorTrack is disabled, set Auto Color To Mono Print to On. All print jobs
are printed in black and white even when color is specified. For details, see "Auto Color To Mono Print."
ColorTrack Settings
To print using Dell™ ColorTrack, configure the following settings.
•
"Dell ColorTrack"
•
"Authentication System"
•
"Kerberos Server"
•
"LDAP Server"
•
"LDAP Authentication"
Dell ColorTrack
Specify the authentication method.
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Volume.
3 Click the Dell ColorTrack tab.
•
Select External Mode for ColorTrack Mode.
•
Select the On check box for Non Registered User when you permit the printing of data with no authentication
information. If not, clear the On check box.
•
Enter the password when External Mode is selected for ColorTrack Mode and On is selected for Non
Registered User. Then, re-enter the password to confirm the password that you entered.
•
Select the On check box for ColorTrack Error Report, if necessary.
4 Click Apply New settings.
5 Turn off the printer, and turn it on again to apply the settings.
Printing Using ColorTrack (External Authentication)
273
When Using the Operator Panel
You can specify only the settings of ColorTrack Mode, Non Registered User, and ColorTrack Error Report using the
operator Panel.
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until System Settings is highlighted, and then press the
(Set) button.
4 Press the
button until ColorTrack Mode is highlighted, and then press the
(Set) button.
5 Press the
button until External Mode is highlighted, and then press the
6 When the Restart System screen appears, press the
button, and then press the
(Set) button.
(Set) button.
(Back) button.
7 Press the
button until Non Registered User is highlighted, and then press the
8 Press the
button until Off or On is highlighted, and then press the
9 When the Restart System screen appears, press the
(Set) button.
(Set) button.
button, and then press the
10 Press the
button until ColorTrack ErrRep is highlighted, and then press the
11 Press the
button until Off or On is highlighted, and then press the
(Back) button.
(Set) button.
(Set) button.
12 Turn off the printer, and turn it on again to apply the settings.
ColorTrack Mode
The following two authentication modes are available: the Internal Mode using user information registered on the
printer, and the External Mode using user information registered on an external server. To authenticate on the
external authentication server with External Mode, you need not register user information on the printer. The
change becomes effective after the printer is turned off and then on again.
Non Registered User
Specify whether to permit the printing of data with no authentication information. This setting is enabled when the
printer is restarted. The change becomes effective after the printer is turned off and then on again.
Non Registered User Password
Specify the password to be used for non-account user using 1 to 127 alphanumeric characters. If the password is left
blank (NULL), you cannot log in to a server. The change becomes effective after the printer is turned off and then
on again.
NOTE: When External Mode is specified and Non Registered User is set to On, you must set a password.
NOTE: When using an LDAP server, you also must set the same password on the server.
Re-enter Non Registered User Password
Enter the Non Registered user password again to confirm it.
ColorTrack Error Report
Specify whether to automatically print error-related information if printing using ColorTrack results in an error.
Setup Remote Authentication
Click Setup Remote Authentication Page to display the Authentication System page.
NOTE: This item is displayed only when External Mode is specified.
274
Printing Using ColorTrack (External Authentication)
Authentication System
Specify the server authentication type, the server response time-out, or the search time-out.
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select Authentication System.
Authentication System page is displayed.
•
Select the authentication system for Authentication System Settings.
•
Specify the time-out period for Server Response Time-Out.
•
Specify the time-out period for Search Time-Out.
5 Click Apply New settings.
6 Turn off the printer, and turn it on again to apply the settings.
Authentication System Settings
Select the authentication system from the list. The change becomes effective after the printer is turned off and then
on again.
Server Response Time-Out
Specify the amount of time the printer should wait for response from the server. Set the time period from 1 up to 75
seconds. The change becomes effective after the printer is turned off and then on again.
Search Time-Out
Specify the amount of time the printer should wait for searching for the server. Set the time period from 5 up to 120
seconds. The change becomes effective after the printer is turned off and then on again.
Kerberos Server
Specify the settings for the Kerberos Server.
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select Kerberos Server.
Printing Using ColorTrack (External Authentication)
275
5 Enter the IP address or host name, and the port address in IP Address / Host Name & Port of Kerberos Server (for
ColorTrack PRO).
6 Enter the domain name in Domain Name.
7 Click Apply New settings.
8 Turn off the printer, and turn it on again to apply the settings.
IP Address / Host Name & Port
Specify the IP address or host name, and the port address. The change becomes effective after the printer is turned
off and then on again.
CAUTION: Do not use the same port address as that of another port.
NOTE: The port address must be 88 or between 5,000 and 65,535. The default value is 88.
NOTE: Specify the IP address in the nnn.nnn.nnn.nnn format for IPv4. Each section of "nnn" is a variable value between 0 and
255.
NOTE: Specify the IP address in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format for IPv6. Each section of "xxxx" is a
hexadecimal variable value.
Domain Name
Specify the domain name of the Active Directory® in Domain Name (Realm Name). The change becomes effective
after the printer is turned off and then on again.
NOTE: Specify the domain name with uppercase characters. Depending on your server, an error may occur if you specify the
domain name with lowercase characters.
LDAP Server
Specify the directory server and the authentication method to execute LDAP authentication or to acquire
information using LDAP, and specify the range and attributes for searching.
NOTE: When using LDAPS or certificate verification, you must set the LDAP server or import an external certificate. For more
information, see "Using Digital Certificates."
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select LDAP Server.
Server Information (for ColorTrack PRO):
•
Enter the IP address or the host name, and the port address in IP Address / Host Name & Port.
•
Confirm the software information for LDAP Server.
Optional Information (for ColorTrack PRO):
276
•
Enter a text string in Search Directory Root.
•
Enter the login name in Login Name.
•
Enter the password in Password. Then, re-enter the password to confirm the password that you entered.
Printing Using ColorTrack (External Authentication)
•
Specify the time-out period for Search Time-Out.
5 Click Apply New settings.
6 Turn off the printer, and turn it on again to apply the settings.
Server Information (for ColorTrack PRO)
IP Address / Host Name & Port
Specify the IP address or the host name, and the port address. The change becomes effective after the printer is
turned off and then on again.
CAUTION: Do not use the same port address as that of another port.
NOTE: The port address must be 389, 636 or between 5,000 and 65,535. The default value is 389. When using LDAPS, normally
specify 636.
NOTE: Specify the IP address in the nnn.nnn.nnn.nnn format for IPv4. Each section of "nnn" is a variable value between 0 and
255.
NOTE: Specify the IP address in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format for IPv6. Each section of "xxxx" is a
hexadecimal variable value.
LDAP Server
Displays the current software information of the LDAP server.
Optional Information (for ColorTrack PRO)
Search Directory Root
Specify a text string as the origin of the search when using LDAP communication. The change becomes effective
after the printer is turned off and then on again.
For example: ou=colortrackv3,dc=win2003ad,dc=colortrack.dc=net
Login Name
Specify the login name for accessing the directory server with LDAP authentication. Specify the name of a user with
the authority to update the LDAP server. The change becomes effective after the printer is turned off and then on
again.
Password
Specify the password for accessing the directory server with LDAP authentication. Specify the password of a user
with the authority to update the LDAP server using 1 to 127 alphanumeric characters. If the password is left blank
(NULL), you cannot log in to a server. The change becomes effective after the printer is turned off and then on
again.
Re-enter Password
Enter the password again to confirm it.
Search Time-Out
Specify the amount of time the printer should wait for searching for the server. To specify a time-out period for
searching, select Wait, and set the time period from 5 up to 120 seconds. To not specify a time-out period, select the
Wait LDAP Server Limit. The change becomes effective after the printer is turned off and then on again.
Printing Using ColorTrack (External Authentication)
277
LDAP Authentication
Specify the LDAP server authentication method.
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select LDAP Authentication.
LDAP Authentication (for ColorTrack PRO):
•
Confirm the authentication method.
•
When adding a text string to the UserID, select Enable for Use Added Text String.
•
When Enable is selected for Use Added Text String, enter the additional text string in Text String Added to
User Name.
5 Click Apply New settings.
6 Turn off the printer, and turn it on again to apply the settings.
Authentication Method
Displays the current LDAP authentication method. Direct Authentication executes server authentication with the
UserID and password entered.
Use Added Text String
Specify whether to add a text string to the UserID. The change becomes effective after the printer is turned off and
then on again.
Text String Added to User Name
When using an added string for the user name, specify the text string to be added.
For example: if the user name is "abcde@myhost.example.com", normally you must enter
"abcde@myhost.example.com".
However if Use Added Text String is set to Enable, and "@myhost.example.com" is specified in Text String Added
to User Name, only the data "abcde" must be entered with the printer driver, thus simplifying the entry task.
The change becomes effective after the printer is turned off and then on again.
Setting the Printer Driver
To print using ColorTrack, set the printer driver. Once set, the settings of the printer driver are enabled until they are
changed.
1 Open Properties of the printer driver.
2 Configure the following settings from the Configuration tab.
278
Printing Using ColorTrack (External Authentication)
Dell ColorTrack Mode
Specify whether to allow general users to change settings related to authentication or whether general users must use
the settings configured by the Administrator.
Specify Group Name
Specify the name of the belonging group to use when authenticating. If you specify a group that does not belong,
authentication fails and the data is not printed. Also, the default group is set if Specify Group Name is not specified.
Specify Job Owner
Select Use Login Name to use the user information logged into your PC, and select Enter ID to enter the user name
yourself.
Job Owner Name
Specify the user name to use when authenticating with an external server. You can enter this only when selecting
Enter ID for Specify Job Owner.
Password
Specify the user password to use when authenticating with an external server.
Printing Using ColorTrack (External Authentication)
279
280
Printing Using ColorTrack (External Authentication)
22
Using Digital Certificates
The authentication feature using digital certificates upgrades security when sending print data or setting data.
This chapter describes how to manage digital certificates.
NOTE: For information about digital certificate error, see "Understanding Printer Messages" and "Digital Certificate Problem."
The following is a typical setup flow for using digital certificates.
Prepare to manage digital certificates.
•
Change the Encryption Setting of the Hard Disk
•
Set HTTPS Communication
Import and set digital certificates.
•
Import a Digital Certificate
•
Set a Digital Certificate
•
Confirm the Settings of a Digital Certificate
Set various security features using digital certificates.
Managing Certificates
This section describes how to manage digital certificates as follows.
•
"Preparing to Manage Certificates"
•
"Importing a Digital Certificate"
•
"Setting a Digital Certificate"
•
"Confirming the Settings of a Digital Certificate"
•
"Deleting a Digital Certificate"
•
"Exporting a Digital Certificate"
NOTE: The external certificate management described above is enabled only when the optional hard disk is installed and is set
to On for encryption.
Preparing to Manage Certificates
Before managing digital certificates, the following settings must be applied.
•
"Changing the Encryption Setting of the Hard Disk"
•
"Setting HTTPS Communication"
Changing the Encryption Setting of the Hard Disk
Some items are effective only when encryption of the optional hard disk is set to On. Change the encryption setting
to On and set a key that is required to encrypt, if necessary.
CAUTION: All files stored on the optional hard disk are cleared when changing the encryption setting.
NOTE: You can enter only characters from 0 to 9, a to z, A to Z, and NULL values for encryption key.
Using Digital Certificates
281
When Using the Operator Panel
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Secure Settings is highlighted, and then press the
(Set) button.
4 Press the
button until Data Encryption is highlighted, and then press the
(Set) button.
5 Press the
button until Encryption is highlighted, and then press the
6 Press the
button until On is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
7 Use the number pad to enter the passphrase for the encryption key, and then press the
(Set) button.
8 The Encryption (All stored documents will be deleted. Are you sure) screen appears. When you confirm that all
(Set) button. When you want to
stored documents will be deleted to change the encryption setting, press the
(Back) button.
quit changing the encryption setting, press the
When Using the Dell™ Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Printer Settings.
3 Click the Printer Settings tab.
4 Select Secure Settings.
5 Check that the Enable check box of Panel Lock Control of Panel Lock is selected.
If Enable is selected, proceed to step 10. If not, perform the following steps.
6 Select the Enable check box of Panel Lock Control of Panel Lock.
7 Enter a four digit password in New Password.
8 Re-enter the password in Re-enter Password.
9 Click Apply New Settings.
For details about Panel Lock, see "Panel Lock."
10 Click Data Encryption.
The Data Encryption page is displayed.
11 Select the Encryption check box.
12 Enter a key that is required to encrypt.
13 Re-enter the key again to confirm it.
14 Click Apply New Settings.
Setting HTTPS Communication
Before managing certificates, set HTTPS communication with a self-signed certificate.
NOTE: Set HTTPS communication after changing the Encryption setting to On.
282
Using Digital Certificates
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select SSL/TLS.
5 Click Generate Self-Signed Certificate of Machine Digital Certificate. The Generate Self-Signed Certificate
page is displayed.
6 Select the size of public key from the list of Size of Public Key.
7 Specifies the issuer of SSL self-signed certificate.
8 Click Generate Signed Certificate.
9 The Restart Printer button is displayed after generating the self-signed certificate, and then click Restart Printer.
10 Repeat steps 2 to 4 to display the SSL/TLS page after restarting the printer.
11 If the self-signed certificate is set correctly, since the HTTP- SSL/TLS Communication column is set to Enable
and a check box is displayed, select Enable.
Importing a Digital Certificate
CAUTION: Before importing a certificate file, back up the certificate file.
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
NOTE: Be sure to import the certificate with Internet Explorer.
NOTE: After importing a PKCS#12 format certificate, the secret key is not exported even if you execute exporting.
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select SSL/TLS.
5 Click Upload Signed Certificate of Machine Digital Certificate.
The Upload Signed Certificate page is displayed.
NOTE: The Upload Signed Certificate button is displayed only when the optional hard disk is installed and is set to On for
encryption.
6 Enter a password.
7 Re-enter the password again to confirm it.
8 Click Browse of File Name, and select the file to be imported.
9 Click Import to import the certificate.
Using Digital Certificates
283
Setting a Digital Certificate
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select SSL/TLS.
5 Click Certificate Management to display the Certificate Management page.
NOTE: The Certificate Management button is displayed only when the optional hard disk is installed and is set to On for
encryption.
6 When setting a Wireless LAN (Server) certificate, select Trusted Certificate Authorities within Category.
When setting a certificate of SSL Server, SSL Client, IPsec, or Wireless LAN (Client), select Local Device.
7 Select the purpose of use from the Certificate Purpose list.
8 Click Display the List to display the Certificate List page.
NOTE: If the list includes more than 20 certificates, click Next to display the next page.
9 Select the certificate to associate. At this time, confirm that Validity of the certificate selected is set to Valid.
10 Click Certificate Details to display the Certificate Details page.
11 Confirm the content, and click Use This Certificate at the upper-right corner.
Confirming the Settings of a Digital Certificate
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select SSL/TLS.
5 Click Certificate Management to display the Certificate Management page.
NOTE: The Certificate Management button is displayed only when the optional hard disk is installed and is set to On for
encryption.
6 Select the category from the Category list.
7 Select the purpose of use from the Certificate Purpose list.
8 Click Display the List to display the Certificate List page.
NOTE: If the list includes more than 20 certificates, click Next to display the next page.
9 The certificate displayed with an asterisk as "*Valid" in the Validity column is the certificate associated with the
use purpose and actually used.
284
Using Digital Certificates
Deleting a Digital Certificate
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select SSL/TLS.
5 Click Certificate Management to display the Certificate Management page.
NOTE: The Certificate Management button is displayed only when the optional hard disk is installed and is set to On for
encryption.
6 Select the category from the Category list.
7 Select the purpose of use from the Certificate Purpose list.
8 Click Display the List to display the Certificate List page.
NOTE: If the list includes more than 20 certificates, click Next to display the next page.
9 Select the certificate to be deleted.
10 Click Certificate Details to display the Certificate Details page.
11 To delete the selected certificate, click Delete at the upper-right corner.
NOTE: When a certificate is deleted, the features associated with the deleted certificate are disabled. To delete a
certificate being used, either set the feature to OFF in advance or switch the association to another certificate, and then
switch to another operation mode if possible before deleting the certificate.
•
For an SSL Server, switch to another certificate such as a self-signed certificate.
•
For an SSL Client, set the LDAP-SSL/TLS and IEEE 802.1x (EAP-TLS) setting to OFF.
•
For IPsec, change the IKE setting to Pre-Shared Key or set the feature to OFF.
•
For Wireless LAN, change the Wireless Security setting to other than WPA-Enterprise before deleting the
certificate.
Exporting a Digital Certificate
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
NOTE: Since the secret key is not exported, an imported PKCS#12 format certificate can be exported only as a PKCS#7
certificate.
1 Launch Dell Printer Configuration Web Tool.
a
Open the web browser.
b
Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool."
2 Select Print Server Settings.
3 Click the Security tab.
4 Select SSL/TLS.
Using Digital Certificates
285
5 Click Certificate Management to display the Certificate Management page.
NOTE: The Certificate Management button is displayed only when the optional hard disk is installed and is set to On for
encryption.
6 Select the category from the Category list.
7 Select the purpose of use from the Certificate Purpose list.
Click Display the List to display the Certificate List page.
NOTE: If the list includes more than 20 certificates, click Next to display the next page.
8 Select the certificate to be exported.
9 Click Certificate Details to display the Certificate Details page.
10 To export the selected certificate, click Export This Certificate.
Setting the Features
You can set various security features using digital certificates.
See the following for details:
•
"Setting the Certificate in the IPsec Digital Signature Mode"
•
"Setting the SSL-use Server Certificate (HTTP/IPP)"
•
"Setting LDAP-SSL/TLS Communication"
•
"Setting Server Certificate Verification for LDAP-SSL/TLS Communication"
•
"Setting Client Certificate for LDAP-SSL/TLS Communication"
•
"Setting for Wireless LAN WPA-Enterprise (EAP-TLS)"
•
"Setting for Wireless LAN WPA-Enterprise (PEAPV0-MS-CHAPV2, EAP-TTLS PAP, EAP-TTLS CHAP)"
•
"Setting Client Certificate for IEEE 802.1x (EAP-TLS)"
Setting the Certificate in the IPsec Digital Signature Mode
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
1 Import the certificate to be used with IPsec. For more information, see "Importing a Digital Certificate."
2 Set the certificate to be used with IPsec. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly in IPsec. For more information, see "Confirming the Settings of a
Digital Certificate."
4 Select Print Server Settings from the left side of the page.
5 Click the Security tab.
6 Select IPsec.
7 Select the Enable check box for Protocol.
8 Select Digital Signature from the IKE list.
9 Set each item, as necessary.
10 Click Apply New Settings.
11 After restarting the printer, IPsec communication using digital signatures is enabled. You can execute IPsec
communication (Digital Signature Mode) between the printer and the network device (such as PC) on which the
certificate and IPsec are set identically as on this device.
286
Using Digital Certificates
Setting the SSL-use Server Certificate (HTTP/IPP)
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
1 Import the certificate to be used with the SSL-use server. For more information, see "Importing a Digital
Certificate."
2 Set the certificate to be used with the SSL-use server. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly. For more information, see "Confirming the Settings of a Digital
Certificate."
NOTE: Confirm whether the newly set certificate, not the self-signed certificate, is associated.
4 After restarting the printer, the certificate set as described above is used as the server certificate when executing
communication with HTTP/IPP-SSL/TLS.
Setting LDAP-SSL/TLS Communication
NOTE: This setting is available only when the optional hard disk is installed and is set to On for encryption.
1 Select Print Server Settings from the left side of the page.
2 Click the Security tab.
3 Select SSL/TLS.
4 Select the Enable check box for LDAP-SSL/TLS Communication.
5 Click Apply New Settings.
6 After restarting the printer, LDAP-SSL/TLS Communication is enabled.
NOTE: When executing the certificate validity of the server and the presentation of the client certificate, see "Setting Server
Certificate Verification for LDAP-SSL/TLS Communication" and "Setting Client Certificate for LDAP-SSL/TLS Communication."
Setting Server Certificate Verification for LDAP-SSL/TLS Communication
NOTE: This setting is available only when the optional hard disk is installed and is set to On for encryption.
NOTE: This feature is enabled only when Enable is set for LDAP-SSL/TLS Communication.
1 Import the root certificate (including intermediate certificate) for the LDAP server certificate. For more
information, see "Importing a Digital Certificate."
NOTE: In the verification of a certificate of the connected server, to automatically search for an imported certificate and
verify the path, the certificate does not need to be associated.
2 Confirm whether the root certificate is correctly imported to the LDAP server. For more information, see
"Confirming the Settings of a Digital Certificate."
3 Select Print Server Settings.
4 Click the Security tab.
5 Select SSL/TLS.
6 Select the Enable check box for Verify Remote Server Certificate.
7 Click Apply New Settings.
8 After restarting the printer, the certificate presented by the LDAP server is verified when LDAP-SSL/TLS
communication starts with the LDAP server.
NOTE: When the result of verification is NG, communication is not established and an error results.
Using Digital Certificates
287
Setting Client Certificate for LDAP-SSL/TLS Communication
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
NOTE: This feature is enabled only when Enable is set for LDAP-SSL/TLS Communication.
1 Import a certificate to be used with SSL Client. For more information, see "Importing a Digital Certificate."
2 Set a certificate to be used with SSL Client. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly. For more information, see "Confirming the Settings of a Digital
Certificate."
4 After restarting the printer, the LDAP client certificate is presented when LDAP-SSL/TLS communication with
the LDAP server starts. When the LDAP server is set to require a client certificate, the client certificate provided
by the printer is verified by the LDAP server.
Setting for Wireless LAN WPA-Enterprise (EAP-TLS)
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
NOTE: WPA-Enterprise is available only when infrastructure is selected as the network type.
NOTE: Be sure to import the certificate with Internet Explorer.
NOTE: After importing a PKCS#12 format certificate, the secret key is not exported even if you execute exporting.
1 Import the certificate to be used with Wireless LAN (server or root certificate). For details, see "Importing a Digital
Certificate."
2 Set the digital certificate for wireless LAN (server or root certificate).
a
Launch Dell Printer Configuration Web Tool.
b
Select Print Server Settings.
c
Click the Security tab.
d
Select SSL/TLS.
e
Click Certificate Management to display the Certificate Management page.
f
Select Trusted Certificate Authorities within Category.
g
Select the Wireless LAN (Server) of use from the Certificate Purpose list.
h
From Certificate Order, select how the certificates are sorted in Certificate List. This setting is not necessary
if you do not need to specify the order for the certificates.
i
Click Display the List to display the Certificate List page.
j
Select the certificate to associate. At this time, confirm that Validity of the certificate selected is set to Valid.
k
Click Certificate Details to display the Certificate Details page.
l
Confirm the content, and click Use This Certificate at the upper-right corner.
3 Confirm whether the certificate is set correctly. For details, see "Confirming the Settings of a Digital Certificate."
4 Import the certificate to be used with Wireless LAN (client or client certificate). For details, see "Importing a
Digital Certificate."
5 Set the digital certificate for wireless LAN (client or client certificate).
288
a
Launch Dell Printer Configuration Web Tool.
b
Select Print Server Settings.
c
Click the Security tab.
Using Digital Certificates
d
Select SSL/TLS.
e
Click Certificate Management to display the Certificate Management page.
f
Select Local Device within Category.
g
Select the Wireless LAN (Server) of use from the Certificate Purpose list.
h
From Certificate Order, select how the certificates are sorted in Certificate List. This setting is not necessary
if you do not need to specify the order for the certificates.
i
Select the certificate to associate. At this time, confirm that Validity of the certificate selected is set to Valid.
j
Click Certificate Details to display the Certificate Details page.
k
Confirm the content, and click Use This Certificate at the upper-right corner.
6 Confirm whether the certificate is set correctly. For details, see "Confirming the Settings of a Digital Certificate."
7 Set WPA-Enterprise for EAP-TLS.
a
Launch Dell Printer Configuration Web Tool.
b
Click the Print Server Settings tab.
c
Select Wireless LAN.
NOTE: This setting is available only when the optional wireless adapter is installed.
d
Select either of the following from the Encryption list of Secure Settings.
•
WPA-Enterprise-AES/WPA2-Enterprise-AES
•
WPA-Enterprise-TKIP
NOTE: WPA-Enterprise-AES/WPA2-Enterprise-AES or WPA-Enterprise-TKIP becomes available only when the
following steps are set correctly.
•
Importing a Digital Certificate
•
Setting a Digital Certificate
•
Confirming the Settings of a Digital Certificate
e
Set EAP-Identity of WPA-Enterprise.
f
Select EAP-TLS from the Authentication Method list of WPA-Enterprise.
g
Click Apply New Settings.
Setting for Wireless LAN WPA-Enterprise (PEAPV0-MS-CHAPV2, EAP-TTLS PAP, EAP-TTLS CHAP)
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
NOTE: WPA-Enterprise is available only when infrastructure is selected as the network type.
NOTE: Be sure to import the certificate with Internet Explorer.
NOTE: After importing a PKCS#12 format certificate, the secret key is not exported even if you execute exporting.
1 Import the certificate to be used with Wireless LAN (server or root certificate). For details, see "Importing a Digital
Certificate."
2 Set the digital certificate for wireless LAN (server or root certificate).
a
Launch Dell Printer Configuration Web Tool.
b
Select Print Server Settings.
c
Click the Security tab.
d
Select SSL/TLS.
e
Click Certificate Management to display the Certificate Management page.
Using Digital Certificates
289
f
Select Trusted Certificate Authorities within Category.
g
Select the purpose of use from the Certificate Purpose list.
h
Click Display the List to display the Certificate List page.
i
Select the certificate to associate. At this time, confirm that Validity of the certificate selected is set to Valid.
j
Click Certificate Details to display the Certificate Details page.
k
Confirm the content, and click Use This Certificate at the upper-right corner.
3 Confirm whether the certificate is set correctly.
a
Launch Dell Printer Configuration Web Tool.
b
Select Print Server Settings.
c
Click the Security tab.
d
Select SSL/TLS.
e
Click Certificate Management to display the Certificate Management page.
f
Select the category from the Category list.
g
Select the Wireless LAN (Server) of use from the Certificate Purpose list.
h
From Certificate Order, select how the certificates are sorted in Certificate List. This setting is not necessary
if you do not need to specify the order for the certificates.
i
Click Display the List to display the Certificate List page.
j
The certificate displayed with an asterisk as "*Valid" in the Validity column is the certificate associated with
the use purpose and actually used.
4 Set WPA-Enterprise for PEAPV0-MS-CHAPV2, EAP-TTLS PAP, or EAP-TTLS CHAP.
a
Launch Dell Printer Configuration Web Tool.
b
Click the Print Server Settings tab.
c
Select Wireless LAN.
d
Select either of the following from the Encryption list of Secure Settings.
NOTE: This setting is available only when the optional wireless adapter is installed.
•
WPA-Enterprise-AES/WPA2-Enterprise-AES
•
WPA-Enterprise-TKIP
NOTE: WPA-Enterprise-AES/WPA2-Enterprise-AES or WPA-Enterprise-TKIP becomes available only when the
following steps are set correctly.
Importing a Digital Certificate
•
Setting a Digital Certificate
•
Confirming the Settings of a Digital Certificate
e
Set EAP-Identity, Login Name, and Password of WPA-Enterprise.
f
Select either of the following from the Authentication Method list of WPA-Enterprise:
g
290
•
•
PEAPV0 MS-CHAPV2
•
EAP-TTLS PAP
•
EAP-TTLS CHAP
Click Apply New Settings.
Using Digital Certificates
Setting Client Certificate for IEEE 802.1x (EAP-TLS)
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
NOTE: This feature is enabled only when Enable is set for IEEE 802.1x (EAP-TLS).
1 Import a certificate to be used with SSL Client. For more information, see "Importing a Digital Certificate."
2 Set a certificate to be used with SSL Client. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly. For more information, see "Confirming the Settings of a Digital
Certificate."
4 After restarting the printer, the IEEE 802.1x (EAP-TLS) certificate is presented when IEEE 802.1x communication
with the RADIUS server starts. When the RADIUS server is set to require a client certificate, the client certificate
provided by the printer is verified by the RADIUS server.
Using Digital Certificates
291
292
Using Digital Certificates
Understanding Fonts
23
Typefaces and Fonts
A font is a set of characters and symbols created with a distinct design. The distinct design is called a typeface. The
typefaces you select add personality to a document. Well-chosen typefaces make a document easier to read.
The printer has numerous resident fonts in PCL 5/PCL 6 and PostScript 3. See "Resident Fonts" for a listing of all
resident fonts.
Weight and Style
Typefaces are often available in different weights and styles. These variations modify the original typeface so you can,
for example, emphasize important words in text or highlight book titles. The different weights and styles are
designed to complement the original typeface.
Weight refers to the thickness of the lines that form the characters. Thicker lines result in darker characters. Some
words commonly used to describe the weight of a typeface are bold, medium, light, black, and heavy.
Style refers to other typeface modifications, such as tilt or character width. Italic and oblique are styles where the
characters are tilted. Narrow, condensed, and extended are three common styles that modify the character widths.
Some fonts combine several weight and style modifications; for example, Helvetica BdOb. A group of several weight
and style variations of a single typeface is called a typeface family. Most typeface families have four variations:
regular, italic (oblique), bold, and bold italic (bold oblique). Some families have more variations, as the following
illustration for the Helvetica typeface family shows:
Pitch and Point Size
The size of a font is specified as either a pitch or point size, depending on whether the font is fixed space or
proportional.
In fixed space fonts, each character has the same width. Pitch is used to specify the size of fixed space fonts. It is a
measure of the number of characters that will print in one horizontal inch of type. For example, all 10-pitch fonts
print 10 characters per inch (cpi) and all 12-pitch fonts print 12 cpi:
Understanding Fonts
293
In proportional (or typographic) fonts, every character can have a different width. Since proportional fonts have
characters with different widths, the font size is specified in point size, not pitch. Point size refers to the height of
the characters in the font. A point is defined as 1/72 inch. The characters in a font printed at 24 point will be twice as
large as the characters in the same font printed at 12 point.
The following illustration shows samples of a font printed in different point sizes:
The point size of a font is defined as the distance from the top of the tallest character in the font to the bottom of
the lowest character in the font. Due to the definition of point size, different fonts printed at the same point size
may appear quite different in size. This is because there are other font parameters that affect how the font looks.
However, the point size of a font is an excellent specification of the relative size of a font. The following examples
illustrate two very different proportional fonts at 14 point:
Bitmapped and Scalable Fonts
The printer uses both bitmapped and scalable fonts.
Bitmapped fonts are stored in print memory as predefined patterns of bits that represent a typeface at a specific size,
style, and resolution. The following illustration shows an example of a character from a bitmapped font.
Bitmapped fonts are available in different type styles and point sizes as downloadable fonts.
Scalable fonts (also called outline fonts) are stored as computer programs that define the outlines of the characters
in the font. Each time you print characters from a scalable font, the printer creates a bitmap of the characters at the
point size you choose and saves it temporarily in print memory.
294
Understanding Fonts
These temporary bitmapped fonts are deleted when you turn off or reset the printer. Scalable fonts provide the
flexibility of printing in many different point sizes.
Your printer uses different scalable font formats for downloading fonts to the printer. PCL 5/PCL 6 uses Intellifont
and TrueType scalable fonts. PostScript 3 uses Type 1 and TrueType scalable fonts. There are thousands of different
scalable fonts available in these different font formats from numerous font suppliers.
If you plan to use many downloadable bitmapped or scalable fonts or if you plan to use many different sizes of
scalable fonts, you may need to purchase additional memory for your printer.
Resident Fonts
Your printer is equipped with resident fonts stored permanently in print memory. Different fonts are available in
PCL 5/PCL 6 and PostScript 3. Some of the most popular typefaces, like Courier and TimesNew (PCL 5/PCL
6)/Times New Roman (PostScript 3), are available for all printer languages.
The following table lists all the fonts resident in your printer. See "Report / List" for instructions on how to print
samples of the fonts. You can select the resident fonts from your software program. You can also select the fonts from
the operator panel if you are using PCL 5/PCL 6.
Resident bitmapped and scalable fonts
PCL 5/PCL 6
PostScript 3
CG Times
Albertus
CG Times It
Albertus Italic
CG Times Bd
Albertus Light
CG Times BdIt
Antique Olive Roman
Univers Md
Antique Olive Italic
Univers MdIt
Antique Olive Bold
Univers Bd
Antique Olive Compact
Univers BdIt
Apple Chancery
Univers MdCd
Arial
Univers MdCdIt
Arial Italic
Univers BdCd
Arial Bold
Univers BdCdIt
Arial Bold Italic
ITC Avant Garde Gothic Book
AntiqueOlv
ITC Avant Garde Gothic Book Oblique
AntiqueOlv It
ITC Avant Garde Gothic Demi
AntiqueOlv Bd
ITC AvantGarde Gothic Demi Oblique
Bodoni Roman
Understanding Fonts
295
Resident bitmapped and scalable fonts
PCL 5/PCL 6
PostScript 3
CG Omega
Bodoni Italic
CG Omega It
Bodoni Bold
CG Omega Bd
Bodoni Bold Italic
CG Omega BdIt
Bodoni Poster
Garamond Antiqua
ITC Bookman Light
Garamond Krsv
ITC Bookman Light Italic
Garamond Hlb
ITC Bookman Demi
Garamond KrsvHlb
ITC Bookman Demi Italic
Bodoni Poster Compressed
Carta
Courier
Chicago
Courier It
Clarendon Roman
Courier Bd
Clarendon Bold
Courier BdIt
Clarendon Light
Cooper Black
LetterGothic
Cooper Black Italic
LetterGothic It
Cooper Gothic 32BC
LetterGothic Bd
Cooper Gothic 33BC
Coronet
Albertus Md
Albertus XBd
Courier
Courier Oblique
Courier Bold
Clarendon Cd
Courier Bold Oblique
Eurostile Medium
Coronet
Eurostile Bold
Eurostile Extended No. 2
Marigold
Eurostile Bold Extended No. 2
Geneva
Arial
Gill Sans
Arial It
Gill Sans Italic
Arial Bd
Gill Sans Bold
Arial BdIt
Gill Sans Bold Italic
TimesNew
Gill Sans Light Italic
TimesNew It
Gill Sans Extra Bold
TimesNew Bd
Gill Sans Condensed
TimesNew BdIt
Gill Sans Condensed Bold
Gill Sans Light
Goudy Oldstyle
Symbol
Goudy Oldstyle Italic
Goudy Bold
296
Understanding Fonts
Resident bitmapped and scalable fonts
PCL 5/PCL 6
Wingdings
PostScript 3
Goudy Bold Italic
Goudy Extra Bold
Line Printer
Helvetica
Helvetica Oblique
Times Roman
Helvetica Bold
Times It
Helvetica Bold Oblique
Times Bd
Helvetica Narrow
Times BdIt
Helvetica Narrow Oblique
Helvetica
Helvetica Narrow Bold Oblique
Helvetica Ob
Helvetica Condensed
Helvetica Bd
Helvetica Condensed Oblique
Helvetica BdOb
Helvetica Condensed Bold
Helvetica Narrow Bold
Helvetica Condensed Bold Oblique
CourierPS
Hoefler Text
CourierPS Ob
Hoefler Text Italic
CourierPS Bd
Hoefler Text Black
CourierPS BdOb
Hoefler Text Black Italic
Hoefler Ornaments
SymbolPS
Joanna
Palatino Roman
Joanna Bold
Palatino It
Joanna Bold Italic
Palatino Bd
Letter Gothic
Palatino BdIt
Letter Gothic Slanted
Joanna Italic
Letter Gothic Bold
ITCBookman Lt
Letter Gothic Bold Slanted
ITCBookman LtIt
ITC Lubalin Graph Book
ITCBookmanDm
ITC Lubalin Graph Book Oblique
ITCBookmanDm It
ITC Lubalin Graph Demi
ITC Lubalin Graph Demi Oblique
HelveticaNr
Marigold
HelveticaNr Ob
Monaco
HelveticaNr Bd
ITC Mona Lisa Recut
HelveticaNr BdOb
New Century Schoolbook Roman
New Century Schoolbook Italic
N C Schbk Roman
New Century Schoolbook Bold
N C Schbk It
New Century Schoolbook Bold Italic
N C Schbk Bd
NewYork
N C Schbk BdIt
Optima Roman
Understanding Fonts
297
Resident bitmapped and scalable fonts
PCL 5/PCL 6
PostScript 3
Optima Italic
ITC A G Go Bk
Optima Bold
ITC A G Go BkOb
Optima Bold Italic
ITC A G Go Dm
Oxford
ITC A G Go DmOb
Palatino Roman
Palatino Italic
ZapfC MdIt
Palatino Bold
Palatino Bold Italic
ZapfDingbats
Stempel Garamond Roman
Stempel Garamond Italic
Stempel Garamond Bold
Stempel Garamond Bold Italic
Symbol
Tekton Regular
Times Roman
Times Italic
Times Bold
Times Bold Italic
Times New Roman
Times New Roman Italic
Times New Roman Bold
Times New Roman Bold Italic
Univers 45 Light
Univers 45 Light Oblique
Univers 55
Univers 55 Oblique
Univers 65 Bold
Univers 65 Bold Oblique
Univers 57 Condensed
Univers 57 Condensed Oblique
Univers 67 Condensed Bold
Univers 67 Condensed Bold Oblique
Univers 53 Extended
Univers 53 Extended Oblique
Univers 63 Extended Bold
Univers 63 Extended Bold Oblique
Wingdings
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbats
298
Understanding Fonts
Symbol Sets
A symbol set is the collection of alphabetic and numeric characters, punctuation, and special characters available in
the font you select. Symbol sets support the requirements for different languages or specific applications, such as
math symbols used for scientific text.
In PCL 5/PCL 6, a symbol set also defines which character will print for each key on the keyboard (or more
specifically, for each code point). Some applications require different characters at some code points. To support
multiple applications and languages, your printer has 36 symbol sets for the resident PCL 5/PCL 6 fonts.
Symbol Sets for PCL 5/PCL 6
Not all font names support all of the symbol sets listed.
Roman 8 (Default)
ISO 8859-1 Latin 1
ISO 8859-2 Latin 2
ISO 8859-9 Latin 5
ISO 8859-10 Latin 6
PC-8
PC-8 DN
PC-775 Baltic
PC-850 Multilingual
PC-852 Latin 2
PC-1004 OS/2
PC Turkish
Windows 3.1 Latin 1
Windows 3.1 Latin 2
Windows 3.1 Latin 5
DeskTop
PS Text
MC Text
Microsoft Publishing
Math 8
PS Math
Pi Font
Legal
ISO 4 United Kingdom
ISO 6 ASCII
ISO 11 Swedish:names
ISO 15 Italian
ISO 17 Spanish
ISO 21 German
ISO 60 Norwegian v1
ISO 69 French
Windows 3.0 Latin 1
Windows Baltic
Symbol
Wingdings
ITC ZapfDingbats MS
Understanding Fonts
299
300
Understanding Fonts
24
Understanding Printer Messages
The LCD panel displays error messages describing the current state of the printer and indicates possible printer
problems you must resolve. This chapter provides a list of error codes and informs you what you can do to clear error
messages. When you contact customer support about an error, have the error codes and messages ready.
CAUTION: When an error occurs, the print data remaining on the printer and the information accumulated in the memory of
the printer may be corrupted.
NOTE: An error code is listed in an error message.
NOTE: For error codes that are not listed in this chapter, refer to instructions in each error messages.
Error Codes
Error-Code
What you can do
004-310
Turn off the printer. Make sure that the tray is correctly installed, and turn on the printer. Contact customer
support if this failure is repeated.
009-340
Turn off the printer. Clean the CTD sensor with a clean dry cotton swab, and turn on the printer. Contact
customer support if this failure is repeated. For more information about cleaning the CTD sensor, see
"Cleaning the CTD Sensor."
009-360
Turn off the printer. Make sure that the yellow toner cartridge is correctly installed, and turn on the printer.
Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
009-361
Turn off the printer. Make sure that the magenta toner cartridge is correctly installed, and turn on the
printer. Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
009-362
Turn off the printer. Make sure that the cyan toner cartridge is correctly installed, and turn on the printer.
Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
009-363
Turn off the printer. Make sure that the black toner cartridge is correctly installed, and turn on the printer.
Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
009-367
Turn off the printer. Make sure that the yellow toner cartridge is correctly installed, and turn on the printer.
Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
009-368
Turn off the printer. Make sure that the magenta toner cartridge is correctly installed, and turn on the
printer. Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
009-369
Turn off the printer. Make sure that the cyan toner cartridge is correctly installed, and turn on the printer.
Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
009-370
Turn off the printer. Make sure that the black toner cartridge is correctly installed, and turn on the printer.
Contact customer support if this failure is repeated. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
010-317
Turn off the printer, wait for 30 minutes to let the fusing unit cool, and then make sure that the fusing unit
is fully installed. For more information about installing the fusing unit, see "Replacing the Fusing Unit."
010-351
Turn off the printer. Remove the used fusing unit, and install a new fusing unit. For more information about
replacing the fusing unit, see "Replacing the Fusing Unit."
Understanding Printer Messages
301
Error-Code
What you can do
010-377
Turn off the printer. Confirm that the fusing unit is correctly installed, and turn on the printer. Contact
customer support if this failure is repeated. For more information about installing the fusing unit, see
"Replacing the Fusing Unit."
016-316
Turn off the printer. Remove the optional 512MB memory module from the slot, and then reattach it firmly.
Turn on the printer. Contact customer support if this failure is repeated.
016-318
Remove the unsupported memory module. Contact customer support if this failure is repeated.
016-338
Turn off the printer, and turn it on again. If the error message remains on the LCD panel, confirm that the
wireless adapter is securely inserted. Contact customer support if this failure is repeated.
016-404
Contact your system administrator. For more information about digital certificate problems, see "Digital
Certificate Problem."
016-405
Security setting mismatch. Initialize the security setting, and then restart the printer. Contact your system
administrator for the security resetting.
016-520
IPsec certificate error. (Certificate error of the printer.) The certificate of the printer is invalid. Contact your
system administrator. Reset the certificate from other connectable clients with Dell™ Printer
Configuration Web Tool. If no device can be connected, disconnect Ethernet cable, turn off the IPsec, and
then reset the certificate with Dell Printer Configuration Web Tool.
016-521
IPsec certificate error. (Remote device certification verification error.) The certificate of the destination
client is invalid. Contact your system administrator. Confirm the certificate of the destination client and
reset.
016-522
LDAP certificate error. (No client certificate exists.) The SSL client certificate is requested by the LDAP
server. Set the SSL client certificate to the device. Contact your system administrator.
016-523
LDAP certificate error. (Server certificate verification error.) The SSL certificate of the LDAP server is not
trusted by the device. Register the root certificate of the SSL certificate of the LDAP server with the device.
016-524
LDAP certificate error. (No server certificate exists.) Change the SSL certificate of the LDAP server to a
valid SSL certificate.
016-527
LDAP certificate error. (SSL authentication internal error.) The error has occurred inside the program.
Contact your system administrator.
016-534
The LDAP server information setting for ColorTrack PRO is invalid. Check the LDAP server setting of the
printer.
016-541
A wireless certificate (server or client) cannot be correctly referenced while using Wireless LAN
WPA-Enterprise or WPA2-Enterprise. Ask your system administrator to connect the printer with a wired
network, initialize the wireless settings, import the wireless certificate, and set WPA-Enterprise or
WPA2-Enterprise again.
016-542
A server certificate error has occurred when acquiring the certificate with the operation of WPA-Enterprise
or WPA2-Enterprise. This is a problem in the server certificate, such as the validity period has expired for
the server certificate being used with the Radius server. Ask your system administrator to confirm the server
certificate being used with the Radius server.
016-543
A wireless certificate (server or client) corruption error has occurred while using the Wireless LAN
WPA-Enterprise or WPA2-Enterprise. Ask your system administrator to connect the printer with a wired
network, initialize the wireless settings, import the wireless certificate, and set WPA-Enterprise or
WPA2-Enterprise again.
016-720
Error relating to PDL emulation problems has occurred. Change the Print Mode setting in the Graphics tab
of the printer driver. Contact customer support if this failure is repeated.
016-756
Printing in the prohibited time. Contact your system administrator.
016-757
The account is not registered. Contact your system administrator.
016-758
The function cannot be used. Contact your system administrator.
016-759
Printable page limit is exceeded. Contact your system administrator.
302
Understanding Printer Messages
Error-Code
What you can do
016-799
Press the
(Set) button to clear the message and cancel the current print job. Confirm the
configuration of the printer on the printer driver.
016-930
The device is not supported. Remove it from the front USB port.
016-931
The USB hub is not supported. Remove it from the front USB port.
024-920
Remove the paper from the output tray.
024-927
Remove the empty toner cartridge, and install a new cartridge. For more information about replacing the
toner cartridge, see "Replacing the Toner Cartridges."
024-965
Confirm that the size and type specified in the tray settings matches the size and type of paper loaded in the
tray.
024-966
024-969
027-446
Change the IPv6 address to avoid duplication. Turn off the printer, and turn it on again.
027-452
Change the IPv4 address to avoid duplication. Turn off the printer, and turn it on again.
042-700
Wait for a while until the printer cools down. Contact customer support if this failure is repeated.
075-910
Make sure that the multipurpose feeder (MPF) is fully installed.
077-300
Close the front cover.
077-301
Close the right side cover.
077-302
Close the rear cover.
091-911
Remove the used waste toner box, and install a new toner box. For more information about replacing the
waste toner box, see "Replacing the Waste Toner Box."
091-914
Reinsert the black drum cartridge. If the message remains, replace the cartridge. For more information
about reinserting the drum cartridge, see "Replacing the Drum Cartridges."
091-917
Reinsert the yellow drum cartridge. If the message remains, replace the cartridge. For more information
about reinserting the drum cartridge, see "Replacing the Drum Cartridges."
091-918
Reinsert the magenta drum cartridge. If the message remains, replace the cartridge. For more information
about reinserting the drum cartridge, see "Replacing the Drum Cartridges."
091-919
Reinsert the cyan drum cartridge. If the message remains, replace the cartridge. For more information about
reinserting the drum cartridge, see "Replacing the Drum Cartridges."
091-921
Make sure that the black drum cartridge is fully installed. For more information about installing the drum
cartridge, see "Replacing the Drum Cartridges."
091-922
Make sure that the yellow drum cartridge is fully installed. For more information about installing the drum
cartridge, see "Replacing the Drum Cartridges."
091-923
Make sure that the magenta drum cartridge is fully installed. For more information about installing the
drum cartridge, see "Replacing the Drum Cartridges."
091-924
Make sure that the cyan drum cartridge is fully installed. For more information about installing the drum
cartridge, see "Replacing the Drum Cartridges."
091-931
Remove the used black drum cartridge, and install a new cartridge. For more information about replacing
the drum cartridge, see "Replacing the Drum Cartridges."
091-932
Remove the used yellow drum cartridge, and install a new cartridge. For more information about replacing
the drum cartridge, see "Replacing the Drum Cartridges."
091-933
Remove the used magenta drum cartridge, and install a new cartridge. For more information about replacing
the drum cartridge, see "Replacing the Drum Cartridges."
091-934
Remove the used cyan drum cartridge, and install a new cartridge. For more information about replacing the
drum cartridge, see "Replacing the Drum Cartridges."
091-942
Reinsert the black drum cartridge. If the message remains, replace the cartridge. For more information
about replacing the drum cartridge, see "Replacing the Drum Cartridges."
Understanding Printer Messages
303
Error-Code
What you can do
091-943
Reinsert the yellow drum cartridge. If the message remains, replace the cartridge. For more information
about replacing the drum cartridge, see "Replacing the Drum Cartridges."
091-944
Reinsert the magenta drum cartridge. If the message remains, replace the cartridge. For more information
about replacing the drum cartridge, see "Replacing the Drum Cartridges."
091-945
Reinsert the cyan drum cartridge. If the message remains, replace the cartridge. For more information about
replacing the drum cartridge, see "Replacing the Drum Cartridges."
091-960
Remove the unsupported yellow drum cartridge, and install a supported drum cartridge. For more
information about installing the drum cartridge, see "Replacing the Drum Cartridges."
091-961
Remove the unsupported magenta drum cartridge, and install a supported drum cartridge. For more
information about installing the drum cartridge, see "Replacing the Drum Cartridges."
091-962
Remove the unsupported cyan drum cartridge, and install a supported drum cartridge. For more
information about installing the drum cartridge, see "Replacing the Drum Cartridges."
091-963
Remove the unsupported black drum cartridge, and install a supported drum cartridge. For more
information about installing the drum cartridge, see "Replacing the Drum Cartridges."
092-651
Clean the CTD sensor with a clean dry cotton swab. For more information about cleaning the CTD sensor,
see "Cleaning the CTD Sensor."
093-930
Remove the used yellow toner cartridge, and install a new cartridge. For more information about replacing
the toner cartridge, see "Replacing the Toner Cartridges."
093-931
Remove the used magenta toner cartridge, and install a new cartridge. For more information about replacing
the toner cartridge, see "Replacing the Toner Cartridges."
093-932
Remove the used cyan toner cartridge, and install a new cartridge. For more information about replacing the
toner cartridge, see "Replacing the Toner Cartridges."
093-933
Remove the used black toner cartridge, and install a new cartridge. For more information about replacing
the toner cartridge, see "Replacing the Toner Cartridges."
093-960
Remove the unsupported yellow toner cartridge, and install a supported toner cartridge. For more
information about installing the toner cartridge, see "Replacing the Toner Cartridges."
093-961
Remove the unsupported magenta toner cartridge, and install a supported toner cartridge. For more
information about installing the toner cartridge, see "Replacing the Toner Cartridges."
093-962
Remove the unsupported cyan toner cartridge, and install a supported toner cartridge. For more information
about installing the toner cartridge, see "Replacing the Toner Cartridges."
093-963
Remove the unsupported black toner cartridge, and install a supported toner cartridge. For more
information about installing the toner cartridge, see "Replacing the Toner Cartridges."
093-970
Make sure that the yellow toner cartridge is fully installed. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
093-971
Make sure that the magenta toner cartridge is fully installed. For more information about installing the
toner cartridge, see "Replacing the Toner Cartridges."
093-972
Make sure that the cyan toner cartridge is fully installed. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
093-973
Make sure that the black toner cartridge is fully installed. For more information about installing the toner
cartridge, see "Replacing the Toner Cartridges."
094-422
Remove the used transfer belt unit, and install a new transfer belt unit. For more information about
replacing the transfer belt unit, see "Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
094-910
Make sure that the transfer belt unit is fully installed. For more information about installing the transfer belt
unit, see "Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd BTR), and the Retard Roller."
304
Understanding Printer Messages
Error-Code
What you can do
094-911
Remove the used transfer belt unit, and install a new transfer belt unit. For more information about
replacing the transfer belt unit, see "Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
193-700
When genuine toner cartridges are installed, change the Non-Dell Toner setting to disable using the Dell
Printer Configuration Web Tool or the Tool Box.
Understanding Printer Messages
305
306
Understanding Printer Messages
25
Specifications
Operating System Compatibility
Your Dell™ C3760n/C3760dn Color Laser Printer is compatible with Microsoft® Windows® XP, Windows XP 64-bit
Edition, Windows Server® 2003, Windows Server 2003 x64 Edition, Windows Server 2008, Windows Server 2008
64-bit Edition, Windows Server 2008 R2 64-bit Edition, Windows Vista®, Windows Vista 64-bit Edition, Windows
7, Windows 7 64-bit Edition, Windows 8, Windows 8 64-bit Edition, Windows Server 2012, Mac OS X 10.3.9,
10.4.11, 10.5, 10.6, 10.7, 10.8, Red Hat® Enterprise Linux® 5/6 Desktop (x86), and SUSE® Linux Enterprise
Desktop 10/11 (x86).
Power Supply
Rated voltage
220 VAC - 240 VAC
110 VAC - 127 VAC
Frequency
50/60 Hz
50/60 Hz
Current
5 A or less
9 A or less
Power consumption
65.0 W (Ready)
76.0 W (Ready)
13.5 W (Sleep)
13.5 W (Sleep)
4.5 W (Deep Sleep)
4.5 W (Deep Sleep)
0 W (Offline)
0 W (Offline)
3.1 kWh
3.1 kWh
TEC value
Dimensions
Height: 379 mm (14.92 inches) Width: 439 mm (17.28 inches) Depth: 485 mm (19.09 inches)
Weight (including toner cartridges and drum cartridges): 25.7 kg (56.66 lb)
Memory
Base memory
256 MB
Maximum memory
768 MB (256 MB + 512 MB)
Connector
144 pin EP2-2100 DDR2 SDRAM
32b-SO-DIMM
DIMM size
512 MB
Speed
EP2-2100
Page Description Language (PDL)/Emulation, Operating System, and
Interface
PDL/Emulations
PCL 6, PCL5e, PostScript, HBPL, XPS (Host Based)
Specifications
307
Operating systems
Microsoft Windows XP/XP x64/Server 2003/Server 2003 x64/Server 2008/Server 2008 x64/Server 2008
R2 x64/Vista/Vista x64/7/7 x64/8/8 x64/Server 2012, Mac OS X (10.3.9/10.4.11/10.5/10.6/10.7/10.8),
Red Hat Enterprise Linux 5/6 Desktop (x86), and SUSE Linux Enterprise Desktop 10/11 (x86)
Interfaces
Standard local:
USB 2.0
Standard network:
10Base-T/100Base-TX/
1000Base-T Ethernet
Optional network:
IEEE 802.11b/802.11g/802.11n (Wireless)
MIB Compatibility
Management Information Base (MIB) is a database containing information about network devices (such as adapters,
bridges, routers, or computers). This information helps network administrators manage the network (analyze
performance, traffic, errors, and so on). Dell C3760n/C3760dn Color Laser Printer complies with standard industry
MIB specifications, allowing the printer to be recognized and managed by various printer and network management
software systems.
Environment
Operation
Temperature
10 °C - 32 °C
Relative humidity
10 % - 85 % RH (no condensation)
Print Quality Guarantee
Temperature
15 °C - 28 °C
Relative humidity
20 % - 70 % RH (no condensation)
Storage
Temperature range
-20 °C to 40 °C (0 °F to 104 °F)
Storage humidity range
5 % - 85 % RH (no condensation)
Altitude
Operating
Up to 3,100 m (10,170 feet)
Storage
Up to 3,100 m (10,170 feet)
308
Specifications
Cables
Your interconnection cable must meet the following requirements:
Connection type
Connection specifications and symbols
1
Ethernet
10Base-T/100Base-TX/
1000Base-T
2
Wireless adapter socket
IEEE 802.11b/802.11g/802.11n
3
USB
USB 2.0
1
2
3
Optional Wireless Adapter
Item
Description
Connectivity technology
Wireless
Compliant standards
IEEE 802.11b, 802.11g, and 802.11n
Bandwidth
2.4 GHz
Data transfer rate
IEEE 802.11n: 65 Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
Security
64 (40-bit key)/128 (104-bit key) WEP,
WPA- PSK (TKIP, AES), WPA2-PSK (AES), WPA-Enterprise (TKIP, AES)*1*2,
WPA2-Enterprise (AES)*1*2
Wi-Fi Protected Setup® (WPS)*3
Push-Button Configuration (PBC),
Personal Identification Number (PIN)
*1:
This item is available only when the optional hard disk is installed.
*2
: EAP method supports PEAPv0, EAP-TLS, EAP-TTLS PAP, and EAP-TTLS CHAP.
*3
: WPS 2.0 compliant.
Specifications
309
310
Specifications
Maintaining Your Printer
26 Maintaining Your Printer .......................................................... 313
27 Removing Options ..................................................................... 347
28 Clearing Jams............................................................................ 355
311
312
26
Maintaining Your Printer
You need to complete certain tasks to maintain optimum print quality.
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
Determining the Status of Supplies
If your printer is connected to the network, the Dell Printer Configuration Web Tool can provide instant feedback
on remaining toner levels. Type the printer's IP address in your web browser to view this information. To use the EMail Alert Setup feature that notifies you when the printer requires new supplies, type the desired e-mail address in
the e-mail list box.
On the LCD panel screen, you can also confirm the following:
•
Any supply or maintenance items that require attention replacing (However, the printer can only display
information about one item at a time).
•
Amount of toner remaining in each toner cartridge.
Conserving Supplies
You can change several settings in your printer driver to conserve toner cartridge and paper.
Supply
Setting
Toner cartridge Toner Saver in the Others tab
Function
This check box allows the users to select a print mode that uses less
toner. The image quality will be lower when this feature is used.
Print media
Multiple Up in the Layout tab
The printer prints two or more pages on one side of a sheet.
Print media
Duplex in the General tab
The printer prints on both sides of a sheet of paper.
Ordering Supplies
You can order consumables (toner cartridges, drum cartridges, and waste toner box) from Dell on the Internet when
using a networked printer. Type the IP address of your printer in your web browser, launch the Dell Printer
Configuration Web Tool, and click the Order Supplies at: to order consumables for your printer.
You can also order consumables by the following method.
1 Click Start→ All Programs→ Dell Printers→ Additional Color Laser Software→ Dell Supplies Management
System.
The Dell Supplies Management System window appears.
2 Select your printer from the Select Printer Model list.
3 If ordering from the web:
a
Select a URL from the Select Reorder URL list.
b
Click Visit Dell printer supplies ordering web site.
NOTE: When you cannot get information from the printer automatically by two-way communication, a window that
prompts you to type the Service Tag appears. Type your Dell printer Service Tag in the field provided.
Your Service Tag number is located inside the front cover of your printer.
4 If ordering by phone, call the number that appears under the Order by Phone heading.
Maintaining Your Printer
313
Storing Print Media
To avoid potential paper feeding problems and uneven print quality, there are several things you can do:
•
To achieve the best possible print quality, store print media in an environment where the temperature is
approximately 21 °C (70 °F) and the relative humidity is 40 %.
•
Store cartons of print media on a pallet or shelf, rather than directly on the floor.
•
If you store individual packages of print media out of the original carton, ensure that they rest on a flat surface so
the edges do not buckle or curl.
•
Do not place anything on top of the print media packages.
Storing Consumables
Store consumables in their original packaging until you need to use them. Do not store consumables in:
•
Temperatures greater than 40 °C (104 °F).
•
An environment with extreme changes in humidity or temperature.
•
Direct sunlight.
•
Dusty places.
•
A car for a long period of time.
•
An environment where corrosive gases are present.
•
A humid environment.
314
Maintaining Your Printer
Replacing the Toner Cartridges
WARNING: Before performing any of the following procedures, read and follow the safety instructions in the Product
Information Guide.
Dell toner cartridges are available only through Dell. You can order cartridges online at http://www.dell.com/supplies
or by phone. To order by phone, see "Contacting Dell."
It is recommended to use Dell toner cartridges for your printer. Dell does not provide warranty coverage for problems
caused by using accessories, parts, or components not supplied by Dell.
WARNING: Never throw used toner cartridges into fire. The residual toner could explode resulting in burns and injuries.
WARNING: Do not shake the used toner cartridge. This may cause toner spills.
Removing the Toner Cartridge
NOTE: Ensure that you remove all the paper from the MPF and close the MPF cover before removing the toner cartridge.
1 Grasp the grips on both sides of the front cover, and then pull it down to open.
2 Grasp the handle on the toner cartridge that you want to replace, and then pull it out.
WARNING: Do not shake the toner cartridge as it may cause toner spills.
Maintaining Your Printer
315
Installing a Toner Cartridge
1 Unpack a new toner cartridge of the desired color.
2 Shake the new toner cartridge five or six times to distribute the toner evenly.
3 Insert the toner cartridge into the associated cartridge slot, and then push until it stops.
4 Close the front cover.
316
Maintaining Your Printer
Replacing the Drum Cartridges
You need to replace all drum cartridges (yellow, magenta, cyan, and black) at a time.
WARNING: Before performing any of the following procedures, read and follow the safety instructions in the Product
Information Guide.
CAUTION: Protect the drum cartridges against bright light. If the right side cover remains open for more than three minutes,
print quality may deteriorate.
Removing the Drum Cartridge
1 Open the right side cover.
2 Turn the waste toner box lock lever 90-degrees counterclockwise to unlock the waste toner box.
Maintaining Your Printer
317
3 Grasp the handle on the waste toner box and pull it out making sure to hold it upright so that the waste toner does
not spill out.
CAUTION: Take care not to drop the waste toner box while you are removing it.
CAUTION: After removing the waste toner box, do not touch the parts shown in the illustration. Toner can dirty or stain
your hands.
4 Stand the removed waste toner box upright on a level surface.
WARNING: Never lay the waste toner box on its side as this may cause its malfunction or toner spills.
318
Maintaining Your Printer
5 Slightly pressing down the tab on the drum cartridge that you want to replace, pull it out halfway with one hand.
6 Support the drum cartridge with the other hand from underneath, and then pull it out completely.
7 Repeat the steps 5 and 6 to remove the other three cartridges.
Installing a Drum Cartridge
1 Unpack a new drum cartridge of the desired color.
2 Remove the orange protective cover from the drum cartridge.
3 Insert the drum cartridge into the associated cartridge slot, and then push until it stops.
4 Repeat the steps 1 to 3 to insert the other three cartridges.
Maintaining Your Printer
319
5 Remove the cleaning rod from inside the printer.
6 Remove the cleaning pad by pressing the white tabs between your thumb and index finger.
7 Unpack a new cleaning pad.
8 Attach the new cleaning pad to the cleaning rod.
320
Maintaining Your Printer
9 Insert the cleaning rod fully into one of the four holes until it clicks into the interior of the printer as illustrated
below, and then pull it out.
10 Repeat step 9 also on the other three holes. One time insertion is enough for each hole.
11 Return the cleaning rod to its original location.
12 Reinsert the removed waste toner box.
CAUTION: If the waste toner box does not fit into place properly, make sure that the drum cartridge is fully inserted in
the previous step.
Maintaining Your Printer
321
13 Turn the waste toner box lock lever 90-degrees clockwise to lock the waste toner box.
14 Close the right side cover.
Replacing the Fusing Unit
WARNING: Before performing any of the following procedures, read and follow the safety instructions in the Product
Information Guide.
Removing the Fusing Unit
1 Turn off the printer and wait for 30 minutes.
2 Push down the latch to open the rear cover.
322
Maintaining Your Printer
3 Grasp the grips on both sides of the fusing unit squeezing the lever under the left side grip, and then pull out the
unit.
Installing a Fusing Unit
1 Unpack a new fusing unit.
2 Make sure that the two tabs of the fusing unit align with the grooves on the printer, and then insert it into the
printer until it clicks.
3 Close the rear cover.
NOTE: After replacing the fusing unit, be sure to initialize its life counter by following the instructions in the accompanying
manual.
Maintaining Your Printer
323
Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd BTR),
and the Retard Roller
You need to replace all three parts (transfer belt unit, 2nd BTR, and retard roller) at a time. Both the 2nd BTR and
the retard roller for replacement come with a new transfer belt unit.
WARNING: Before performing any of the following procedures, read and follow the safety instructions in the Product
Information Guide.
CAUTION: Ensure nothing touches or scratches the surface (black-colored film) of the transfer belt unit. Scratches, dirt, or oil
from your hands on the film of the transfer belt unit may reduce print quality.
Removing the Transfer Belt Unit
1 Push down the latch to open the rear cover.
2 Open the right side cover.
3 Turn the waste toner box lock lever 90-degrees counterclockwise to unlock the waste toner box.
324
Maintaining Your Printer
4 Grasp the handle on the waste toner box and pull it out making sure to hold it upright so that the waste toner does
not spill out.
CAUTION: Take care not to drop the waste toner box while you are removing it.
CAUTION: After removing the waste toner box, do not touch the parts shown in the illustration. Toner can dirty or stain
your hands.
5 Stand the removed waste toner box upright on a level surface.
WARNING: Never lay the waste toner box on its side as this may cause its malfunction or toner spills.
Maintaining Your Printer
325
6 Open the top cover.
7 Put your fingers through the loops on both sides of the transfer belt unit, and then pull it out.
CAUTION: If you cannot pull out the unit from the printer, make sure that all of the above procedures are performed
properly.
8 Clean the CTD sensor (as shown) with a clean, dry cotton swab.
326
Maintaining Your Printer
Installing a Transfer Belt Unit
1 Unpack a new transfer belt unit.
2 Remove the two orange packing materials first, and then the protective sheet from the transfer belt unit.
CAUTION: Ensure nothing touches or scratches the surface (black-colored film) of the transfer belt unit. Scratches, dirt,
or oil from your hands on the film of the transfer belt unit may reduce print quality.
3 Make sure that the arrow marks on the transfer belt unit and the printer face each other, and then insert the unit
into the printer until it clicks.
4 Close the top cover.
Maintaining Your Printer
327
5 Reinsert the removed waste toner box.
CAUTION: If the waste toner box does not fit into place properly, make sure that the transfer belt unit is fully inserted.
6 Turn the waste toner box lock lever 90-degrees clockwise to lock the waste toner box.
7 Close the right side cover.
NOTE: After replacing the transfer belt unit, be sure to initialize its life counter by following the instructions in the
accompanying manual.
328
Maintaining Your Printer
Removing the 2nd BTR
1 Pinching the tabs on both sides of the 2nd BTR, lift it out of the printer.
Installing a 2nd BTR
1 Unpack a new 2nd BTR.
2 Hold the 2nd BTR by both its ends.
3 Make sure that the arrow marks on the 2nd BTR and the printer face each other, and then press down the 2nd BTR
until it clicks.
4 Close the rear cover.
Maintaining Your Printer
329
Removing the Retard Roller in Tray1
1 Pull tray1 out of the printer about 200 mm.
2 Hold tray1 with both hands, and remove it from the printer.
NOTE: Ensure that you remove all the paper from tray1 before removing the retard roller.
3 Slightly pressing down the lock lever on tray1 to the right with one hand, raise the retard roller with the other hand.
330
Maintaining Your Printer
4 Slide the retard roller to the left to remove it from tray1.
Installing a Retard Roller in Tray1
1 Slide the two axles of the retard roller into the holes on tray1.
2 Press down the retard roller until it snaps.
3 Load paper in tray1, and then insert the tray into the printer and push until it stops.
Maintaining Your Printer
331
Replacing the Waste Toner Box
WARNING: Before performing any of the following procedures, read and follow the safety instructions in the Product
Information Guide.
Removing the Waste Toner Box
1 Open the right side cover.
2 Turn the waste toner box lock lever 90-degrees counterclockwise to unlock the waste toner box.
3 Grasp the handle on the waste toner box and pull it out making sure to hold it upright so that the waste toner does
not spill out.
CAUTION: Take care not to drop the waste toner box while you are removing it.
CAUTION: After removing the waste toner box, do not touch the parts shown in the illustration. Toner can dirty or stain
your hands.
332
Maintaining Your Printer
4 Insert the used waste toner box into the plastic bag that came with the new waste toner box and seal the bag.
Installing a Waste Toner Box
1 Unpack a new waste toner box.
2 Insert the waste toner box.
3 Turn the waste toner box lock lever 90-degrees clockwise to lock the waste toner box.
4 Close the right side cover.
Maintaining Your Printer
333
Cleaning Inside the Printer
Cleaning the CTD Sensor
Clean the Color Toner Density (CTD) sensor only when an alert for the CTD sensor is shown on the Status Monitor
or LCD panel screen.
1 Ensure that the printer is turned off.
2 Push down the latch to open the rear cover.
3 Open the right side cover.
4 Turn the waste toner box lock lever 90-degrees counterclockwise to unlock the waste toner box.
334
Maintaining Your Printer
5 Grasp the handle on the waste toner box and pull it out making sure to hold it upright so that the waste toner does
not spill out.
CAUTION: Take care not to drop the waste toner box while you are removing it.
CAUTION: After removing the waste toner box, do not touch the parts shown in the illustration. Toner can dirty or stain
your hands.
6 Stand the removed waste toner box upright on a level surface.
WARNING: Never lay the waste toner box on its side as this may cause its malfunction or toner spills.
Maintaining Your Printer
335
7 Open the top cover.
8 Put your fingers through the loops on both sides of the transfer belt unit, and then pull it out.
9 Clean the CTD sensor (as shown) with a clean, dry cotton swab.
336
Maintaining Your Printer
10 Make sure that the arrow marks on the transfer belt unit and the printer face each other, and then insert the unit
into the printer until it clicks.
11 Close the top cover.
12 Reinsert the removed waste toner box.
CAUTION: If the waste toner box does not fit into place properly, make sure that the transfer belt unit is fully inserted.
Maintaining Your Printer
337
13 Turn the waste toner box lock lever 90-degrees clockwise to lock the waste toner box.
14 Close the right side cover.
15 Close the rear cover.
Cleaning the Raster Optical Scanner (ROS) Window
To prevent deterioration of printing quality due to stains inside the printer, clean inside the printer regularly by using
the cleaning rod whenever you replace drum cartridges.
1 Open the right side cover.
338
Maintaining Your Printer
2 Turn the waste toner box lock lever 90-degrees counterclockwise to unlock the waste toner box.
3 Grasp the handle on the waste toner box and pull it out making sure to hold it upright so that the waste toner does
not spill out.
CAUTION: Take care not to drop the waste toner box while you are removing it.
CAUTION: After removing the waste toner box, do not touch the parts shown in the illustration. Toner can dirty or stain
your hands.
4 Stand the removed waste toner box upright on a level surface.
WARNING: Never lay the waste toner box on its side as this may cause its malfunction or toner spills.
Maintaining Your Printer
339
5 Remove the cleaning rod from inside the printer.
6 Insert the cleaning rod fully into one of the four holes until it clicks into the interior of the printer as illustrated
below, and then pull it out.
7 Repeat step 6 also on the other three holes. One time insertion is enough for each hole.
340
Maintaining Your Printer
8 Return the cleaning rod to its original location.
9 Reinsert the removed waste toner box.
10 Turn the waste toner box lock lever 90-degrees clockwise to lock the waste toner box.
11 Close the right side cover.
Maintaining Your Printer
341
Adjusting Color Registration
To adjust the color registration when you first install the printer or after moving it to a new location, follow the
procedure below.
•
Printing the Color Registration Chart
•
Determining Values
•
Entering Values
NOTE: If the Panel Lock Control is set to Enable, you need to enter the four digit password to enter the Admin
Settings menu.
Printing the Color Registration Chart
When Using the Operator Panel
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Maintenance is highlighted, and then press the
4 Press the
button until Color Reg Adjust is highlighted, and then press the
(Set) button.
5 Press the
button until Color Regi Chart is highlighted, and then press the
(Set) button.
6 Press the
button until Yes is highlighted, and then press the
(Set) button.
(Set) button.
(Set) button.
The color registration chart is printed.
When Using the Tool Box
1 Click Start→ All Programs→ Dell Printers→ Dell C3760 Color Laser Printer → Tool Box.
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Maintenance from the list at the left side of the page.
The Maintenance page is displayed.
4 Click Start next to Print Color Regi Chart under Color Registration Adjustments.
The color registration chart is printed.
Determining Values
On the color registration chart, there are two types of charts: Chart 1 (fast scan) and Chart 2 (slow scan).
342
Maintaining Your Printer
Chart 1 (fast scan)
Chart 2 (slow scan)
The Chart 1 is used to adjust the color registration for the fast scan direction, which is vertical to paper feed
direction. The Chart 2 is used to adjust the color registration for the slow scan direction, which is horizontal to paper
feed direction.
The following sections explain how to determine the adjustment values for the fast scan and the slow scan using
Chart 1 and Chart 2.
Fast Scan
On the Chart 1 of the color registration chart, find the straightest lines where the two black lines and the colored line
are most closely aligned for each color (LY, LM, LC, RY, RM, and RC). If you find the straightest line, make a note
of the value (-8 to +8) indicated by the straightest line for each color.
When the value is 0 for each color, you do not need to adjust the color registration for the fast scan.
When the value is not 0, enter the value using the procedure in "Entering Values."
Straightest line
Maintaining Your Printer
343
NOTE: If it is difficult to choose only one value, as in the case that there seem to be two values closest to a straight line, take the
value between the two. For example, in the figure above, -6 and -8 are the values closest to a straight line, so you would enter the
value -7.
Slow Scan
On the Chart 2 of the color registration chart, find the medium line within the range of white area for each color
pattern (PY, PM, and PC). If you find the medium line, make a note of the value (-9 to +9) indicated by the
medium line for each color.
When the value is 0 for each color, you do not need to adjust the color registration for the slow scan.
When the value is not 0, enter the value using the procedure in "Entering Values."
Lattice pattern
Entering Values
When Using the Operator Panel
Using the operator panel, enter the values found in the color registration chart to make adjustments.
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Maintenance is highlighted, and then press the
4 Press the
button until Color Reg Adjust is highlighted, and then press the
5 Press the
button until Enter Number is highlighted, and then press the
6 Ensure that LY is highlighted and press the
7 Press the
8 Press the
or
(Set) button.
(Set) button.
button to specify the values.
button to move the highlight to the next value.
(Set) button.
RY is highlighted.
9 Repeat steps 6 to 8 to enter the desired values, and then press the
344
Maintaining Your Printer
(Set) button.
(Set) button.
(Set) button.
NOTE: You can specify each value for process, left, and right colors (LY, LM, LC, RY, RM, RC, PY, PM, and PC) by repeating the
steps 6 to 8.
NOTE: The registration values are always shown as 0 the next time you enter the menu.
10 Press the
button until Color Regi Chart is highlighted, and then press the
11 Press the
button until Yes is highlighted, and then press the
(Set) button.
(Set) button.
The color registration chart with the new values is printed.
If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and after the
adjustments will help you to determine the values to enter.
When Using the Tool Box
Using the Tool Box, enter the values that you found in the color registration chart to make adjustments.
1 Click Start→ All Programs→ Dell Printers→ Dell C3760 Color Laser Printer→ Tool Box.
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Maintenance from the list at the left side of the page.
The Maintenance page is displayed.
4 Specify each value for process, left, and right colors in Registration Adjustments under Manual Registration
Adjustments, and then click Apply New Settings.
5 Click Start next to Print Color Regi Chart under Color Registration Adjustments.
The color registration chart is printed with the new values.
6 Adjust till all straight lines are at the value of 0. Show image of before and after adjustment will help.
After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.
NOTE: If 0 is not next to the straightest lines, determine the values and adjust the printer again.
Maintaining Your Printer
345
346
Maintaining Your Printer
Removing Options
27
If the printer location needs to change or the printer and print media handling options need to be shipped to a new
location, all print media handling options must be removed from the printer. For shipping, pack the printer and print
media handling options securely to avoid damage.
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
Removing the Optional Memory Module
WARNING: When you remove the optional memory module, be sure to turn off the printer, unplug the power cable, and
disconnect all cables from the back of the printer before starting these tasks.
1 Ensure that the printer is turned off.
2 Turn the screw on the left side cover counterclockwise.
3 Slide the left side cover towards the back of the printer.
4 Open the left side cover completely.
Removing Options
347
5 Push the clips on both sides of the slot outward to raise the memory module up.
6 Hold the memory module and pull it straight out.
7 Close the left side cover, and then slide it towards the front of the printer.
8 Turn the screw clockwise.
9 Turn on the printer.
348
Removing Options
Removing the Optional 550-Sheet Feeder
WARNING: When you remove the optional 550-sheet feeder (Tray2), be sure to turn off the printer, unplug the power cable, and
disconnect all cables from the back of the printer before starting these tasks.
1 Ensure that the printer is turned off, and then disconnect all cables from the back of the printer.
2 Pull the tray1 out of the printer about 200 mm.
3 Hold tray1 with both hands, and remove it from the printer.
4 Remove the two screws joining the printer and the optional 550-sheet feeder by unscrewing them with a coin or
similar object.
Removing Options
349
5 Gently lift the printer off the optional 550-sheet feeder, and place it on a level surface.
WARNING: Two people are required to lift the printer.
6 Insert the tray1 into the printer, and push until it stops.
CAUTION: Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.
7 Re-connect all cables into the back of the printer and turn on the printer.
350
Removing Options
Removing the Optional Wireless Adapter
WARNING: When you remove the optional wireless adapter, be sure to turn off the printer, unplug the power cable, and
disconnect all cables from the back of the printer before starting these tasks.
1 Ensure that the printer is turned off.
2 Turn the screw on the left side cover counterclockwise to remove it.
3 Slide the left side cover towards the back of the printer.
4 Open the left side cover completely.
Removing Options
351
5 Remove the wireless adapter from the printer by releasing the adapter's hook while pushing the wireless adapter
towards the front of the printer.
6 Close the left side cover, and then slide it towards the front of the printer.
7 Turn the screw clockwise.
8 Turn on the printer.
352
Removing Options
Removing the Optional Hard Disk
WARNING: When you remove the optional wireless adapter, be sure to turn off the printer, unplug the power cable, and
disconnect all cables from the back of the printer before starting these tasks.
1 Ensure that the printer is turned off.
2 Turn the screw on the control board counterclockwise
3 Slide the left side cover towards the back of the printer.
4 Open the left side cover completely.
Removing Options
353
5 Remove the hard disk from the printer by releasing the hook of hard disk.
6 Close the left side cover, and then slide it towards the front of the printer.
7 Turn the screw clockwise.
8 Turn on the printer.
354
Removing Options
Clearing Jams
28
Careful selection of appropriate print media and proper loading allow you to avoid paper jams. See "Print Media
Guidelines" for more information.
NOTE: The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
NOTE: Before buying large quantities of any print media, it is recommended to try a sample first.
Avoiding Jams
•
Use only recommended print media. See "Print Media Guidelines" for more information.
•
See "Loading Print Media in Tray1 and the Optional 550-Sheet Feeder" and "Loading Print Media in the MPF" to
load print media properly.
•
Do not overload the print media sources. Ensure that the print media stack height does not exceed the maximum
height indicated by the load-line labels in the tray.
•
Do not load wrinkled, creased, damp, or curled print media.
•
Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try feeding one sheet at a
time through the multipurpose feeder (MPF).
•
Do not use print media that you have cut or trimmed yourself.
•
Do not mix print media sizes, weights, or types in the same print media source.
•
Ensure that the recommended print side is face up when you insert the print media.
•
Keep print media stored in an acceptable environment. For more information, see "Storing Print Media."
•
Do not remove the feeding tray during a print job.
•
Push tray1 or the optional 550-sheet feeder (tray2) in firmly after loading.
•
Ensure that all cables that connect to the printer are correctly attached.
•
Overtightening the guides may cause jams.
•
Wipe the retard rollers in the tray or MPF with a cloth that is slightly dampened with water if jams caused by
misfeeding paper occur frequently.
Clearing Jams
355
Identifying the Location of Paper Jams
WARNING: Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer.
The following illustration shows where paper jams may occur along the print media path.
1
4
1
Fusing Unit
2
Tray1
3
MPF
4
Optional 550-Sheet Feeder
3
2
Clearing Paper Jams From the MPF
NOTE: To resolve the error displayed on the LCD panel, you must clear all print media from the print media path.
If error code: 050-112 appears:
1 Remove any paper loaded on the MPF
356
Clearing Jams
2 Grasp both sides of the MPF, and then pull it out of the printer.
3 Pull tray1 out of the printer about 200 mm.
4 Hold tray1 with both hands, and remove it from the printer.
Clearing Jams
357
5 Remove the jammed paper.
6 Insert tray1 into the printer, and push until it stops.
7 Insert the MPF into the printer.
If error code: 050-129 appears:
Follow the instructions in "If error code: 050-129 appears:" to clear paper jams.
358
Clearing Jams
Clearing Paper Jams From Tray1
NOTE: To resolve the error displayed on the LCD panel, you must clear all print media from the print media path.
1 Pull tray1 out of the printer about 200 mm.
2 Hold tray1 with both hands, and remove it from the printer.
3 Remove the jammed paper.
Clearing Jams
359
4 Insert tray1 into the printer, and push until it stops.
5 Press the
(Set) button.
Clearing Paper Jams From the Fusing Unit
NOTE: To resolve the error displayed on the LCD panel, you must clear all print media from the print media path.
If error code: 050-111 appears:
1 Push down the latch to open the rear cover.
2 Lift the levers on both sides of the fusing unit.
360
Clearing Jams
3 Hold and lower the tab to open the inner part.
4 Remove the jammed paper.
5 Replace the inner part.
6 Press down the levers on both sides of the fusing unit, and then close the rear cover.
Clearing Jams
361
If error code: 050-129 appears:
1 Remove any paper loaded on the MPF
2 Grasp both sides of the MPF, and then pull it out of the printer.
3 Pull tray1 out of the printer about 200 mm.
362
Clearing Jams
4 Hold tray1 with both hands, and remove it from the printer.
If you can see the jammed paper:
a
Remove the jammed paper.
b
Reinsert tray1 and the MPF into the printer.
If you cannot see the jammed paper:
a
Go to the next step.
Clearing Jams
363
5 Push down the latch to open the rear cover.
6 Lift the levers on both sides of the fusing unit.
7 Hold and lower the tab to open the inner part.
364
Clearing Jams
8 Remove the jammed paper.
9 Replace the inner part.
10 Press down the levers on both sides of the fusing unit, and then close the rear cover.
11 Insert tray1 into the printer, and push until it stops.
Clearing Jams
365
12 Insert the MPF into the printer.
Clearing Paper Jams From the Optional 550-Sheet Feeder
NOTE: To resolve the error displayed on the LCD panel, you must clear all print media from the print media path.
1 Pull the optional 550-sheet feeder out of the printer about 200 mm.
2 Hold the optional 550-sheet feeder with both hands, and remove it from the printer.
366
Clearing Jams
3 Remove the jammed paper.
4 Insert the optional 550-sheet feeder into the printer, and push until it stops.
Clearing Jams
367
368
Clearing Jams
Troubleshooting
29 Troubleshooting Guide ............................................................. 371
369
370
29
Troubleshooting Guide
Basic Printer Problems
Some printer problems can be easily resolved. If a problem occurs with your printer, check each of the following:
•
The power cable is plugged into the printer and a properly grounded electrical outlet.
•
The printer is turned on.
•
The electrical outlet is not turned off at any switch or breaker.
•
Other electrical equipment plugged into the outlet is working.
•
All options are properly installed.
If you have checked all of the above and still have a problem, turn off the printer, wait for 10 seconds, and then turn
on the printer. This often fixes the problem.
NOTE: If error messages are displayed on the LCD panel or on your computer screen, follow the on-screen instructions to
resolve the printer problems. For details about error messages and error codes, see "Understanding Printer Messages."
Display Problems
Problem
Action
Menu settings changed from the operator
panel have no effect.
Settings in the software program, the printer driver, or the printer utilities are
overriding the settings made on the operator panel.
Printing Problems
NOTE: If Panel Lock Control is set to Enable, you need to enter the four digit password to enter the Admin
Settings menu.
Problem
Action
Job did not print or incorrect characters
printed.
Ensure that the top menu appears on the LCD panel before you send a job to
print. Press the
(Menu) button to return to the top menu.
Ensure that the print media is loaded in the printer. Press the
to return to the top menu.
(Menu) button
Verify that the printer is using the correct page description language (PDL).
Verify that you are using the correct printer driver.
Ensure that the correct USB or Ethernet cable is securely connected to the printer.
Verify that the correct print media size is selected.
If you are using a print spooler, verify that the spooler has not stalled.
Check the printer's interface from the Admin Settings.
Determine the host interface you are using. Print a panel settings report to verify
that the current interface settings are correct.
Troubleshooting Guide
371
Problem
Action
Print media misfeeds or multiple feeds
occur.
Ensure that the print media you are using meets the specifications for your printer.
See "Supported Paper Types" for more information.
Fan the print media before loading it.
Ensure that the print media is loaded correctly.
Ensure that the width and length guides of the print media sources are adjusted
correctly.
Ensure that tray1, the optional 550-sheet feeder (tray2), or the multi-purpose
feeder (MPF) unit is securely inserted.
Do not overload tray1, the optional 550-sheet feeder, or the MPF.
Do not force print media into the MPF when you load it; otherwise, it may skew or
buckle.
Ensure that the print media is not curled.
Face the recommended print side up. See "Loading Print Media in Tray1 and the
Optional 550-Sheet Feeder" for more information.
Turn the print media over or around and try printing again to see if feeding
improves.
Do not mix print media types.
Do not mix reams of print media.
Remove the top and bottom curled sheets of a ream before loading the print
media.
Load print media only when tray1, the optional 550-sheet feeder, or the MPF is
empty.
Wipe the retard rollers in tray1, the optional 550-sheet feeder, or the MPF with a
cloth moistened with water.
The envelope is creased after printed.
Make sure that the envelope is loaded in the MPF as instructed in "Loading an
Envelope in the MPF."
Page breaks in unexpected places.
Increase the value for Time-Out using the operator panel, the Tool Box, or Dell™
Printer Configuration Web Tool.
Print media does not stack neatly in the
output tray.
Turn the print media stack over in tray1 or the MPF.
Cannot perform manual duplex printing.
Select Flip on Short Edge or Flip on Long Edge from the Duplex drop-down
menu on the General tab in the printer driver.
Cannot print from tray1 or the optional 550- Load the print media into the MPF.
sheet feeder because the print media in
tray1 or the optional 550-sheet feeder is
curled.
Print Quality Problems
NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or Dell Printer
Configuration Web Tool. For information on how to use the operator panel and Dell Printer Configuration Web Tool, see
"Understanding the Printer Menus" and "Dell™ Printer Configuration Web Tool."
•
The output is too light
•
Toner smears or print comes off
•
Random spots/Blurred images
•
The entire output is blank
372
Troubleshooting Guide
•
Streaks appear on the output
•
Part or the entire output is black
•
Pitched color dots
•
Vertical blanks
•
Ghosting
•
Light-induced fatigue
•
Fog
•
Bead-Carry-Out (BCO)
•
Jagged characters
•
Banding
•
Auger mark
•
Wrinkled/Stained paper
•
Damage on the leading edge of paper
The output is too light
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Go to action 3.
The task is complete.
Go to action 4.
The toner cartridges may be low or need to be replaced. Confirm the
amount of toner left in each toner cartridge.
a Check the toner level in the Status tab in the Status Monitor.
b Replace the toner cartridges as necessary.
Does this solve your problem?
2
If you are using non-Dell brand toner cartridges, enable the Non-Dell
Toner option.
a Launch the Tool Box, and click Maintenance on the Printer
Maintenance tab.
b Ensure that the On check box under Non-Dell Toner is selected.
Does this solve your problem?
3
Disable the Toner Saver in the printer driver.
a On the Others tab, ensure that Off is selected in the Toner Saver
drop-down menu.
Does this solve your problem?
Troubleshooting Guide
373
Action
Yes
No
4
The task is complete.
Go to action 5.
The task is complete.
Go to action 6.
The task is complete.
Go to action 7.
The task is complete.
Contact Dell.
Action
Yes
No
1
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the General tab, change the Paper Type setting.
The task is complete.
Go to action 2.
2
Verify that the correct print media is being used. See "Supported Paper
Types." If not, use the print media recommended for the printer.
The task is complete.
Go to action 3.
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the General tab, change the Paper Type setting.
Does this solve your problem?
5
Verify that the correct print media is being used. See "Supported Paper
Types." If not, use the print media recommended for the printer.
6
Clean inside the printer by using the cleaning rod. See "Cleaning the
Raster Optical Scanner (ROS) Window."
a After the cleaning is completed, click Chart Print on the Diagnosis
tab.
b Click Pitch Configuration Chart.
Does this solve your problem?
The Pitch Configuration Chart is printed.
Does this solve your problem?
7
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click 4 Colors Configuration Chart.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
Toner smears or print comes off
Does this solve your problem?
Does this solve your problem?
374
Troubleshooting Guide
Action
Yes
No
3
The task is complete.
Go to action 4.
The task is complete.
Replace the fusing unit.
a Replace the fusing unit. See "Replacing the Fusing Unit."
b After you replace the fusing unit, click Chart Print on the Diagnosis
tab.
c Click Pitch Configuration Chart.
Go to action 5.
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, test print your document
again.
Does this solve your problem?
4
The Pitch Configuration Chart is printed.
Does this solve your problem?
5
Replace the transfer belt unit, the 2nd Belt Transfer Roller (2nd BTR), The task is complete.
and the retard roller.
a Replace the transfer belt unit, the 2nd BTR, and the retard roller. See
"Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
b After you replace the transfer belt unit, the 2nd BTR, and the retard
Contact Dell.
roller, click Chart Print on the Diagnosis tab.
c Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
Random spots/Blurred images
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Go to action 3.
Ensure that the toner cartridges are installed correctly. See "Installing a
Toner Cartridge."
Does this solve your problem?
2
Ensure that the drum cartridges are installed correctly. See "Installing a
Drum Cartridge."
Does this solve your problem?
Troubleshooting Guide
375
Action
Yes
No
3
The task is complete.
Contact Dell.
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
The entire output is blank
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Go to action 3.
The task is complete.
Go to action 4.
The task is complete.
Go to action 5.
The task is complete.
Go to action 6.
The toner cartridges may be low or need to be replaced. Confirm the
amount of toner left in each toner cartridge.
a Check the toner level in the Status tab in the Status Monitor.
b Replace the toner cartridges as necessary.
Does this solve your problem?
2
If you are using non-Dell brand toner cartridges, enable the Non-Dell
Toner option.
a Launch the Tool Box, and click Maintenance on the Printer
Maintenance tab.
b Ensure that the On check box under Non-Dell Toner is selected.
Does this solve your problem?
3
Disable the Toner Saver in the printer driver.
a On the Others tab, ensure that Off is selected in the Toner Saver
drop-down menu.
Does this solve your problem?
4
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a On the General tab, change the Paper Type setting.
5
Verify that the correct print media is being used. See "Supported Paper
Types." If not, use the print media recommended for the printer.
Does this solve your problem?
Does this solve your problem?
376
Troubleshooting Guide
Action
Yes
No
6
The task is complete.
Contact Dell.
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click 4 Colors Configuration Chart.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
Streaks appear on the output
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Go to action 3.
The task is complete.
Contact Dell.
The toner cartridges may be low or need to be replaced. Confirm the
amount of toner left in each toner cartridge.
a Check the toner level in the Status tab in the Status Monitor.
b Replace the toner cartridges as necessary.
Does this solve your problem?
2
If you are using non-Dell brand toner cartridges, enable the Non-Dell
Toner option.
a Launch the Tool Box, and click Maintenance on the Printer
Maintenance tab.
b Ensure that the On check box under Non-Dell Toner is selected.
Does this solve your problem?
3
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click 4 Colors Configuration Chart.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
Troubleshooting Guide
377
Part or the entire output is black
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Go to action 3.
The task is complete.
Contact Dell.
Action
Yes
No
1
Proceed to the action
corresponding to the
location of the
problem:
Contact Dell.
Ensure that the drum cartridges are installed correctly. See "Installing a
Drum Cartridge."
Does this solve your problem?
2
Ensure Output Color is set to Color in the printer driver.
a On the Graphics tab, ensure that Output Color is set to Color.
Does this solve your problem?
3
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click 4 Colors Configuration Chart.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
Pitched color dots
Locate the cause of the problem using the Pitch Configuration Chart.
a Launch the Tool Box, and click Chart Print on the Diagnosis tab.
b Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
c Compare the pitch of the color spots on your output with that on the
Pitch Configuration Chart, and locate the cause of the problem.
Is the cause of the problem located?
378
Troubleshooting Guide
• Drum cartridge - 2
• Fusing unit - 3
• Transfer belt unit - 4
Action
Yes
No
2
The task is complete.
Contact Dell.
Replace the fusing unit.
The task is complete.
a Replace the fusing unit. See "Replacing the Fusing Unit."
b After you replace the fusing unit, click Chart Print on the Diagnosis
tab.
c Click Pitch Configuration Chart.
Contact Dell.
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
3
The Pitch Configuration Chart is printed.
Does this solve your problem?
4
Replace the transfer belt unit, the 2nd BTR, and the retard roller.
The task is complete.
a Replace the transfer belt unit, the 2nd BTR, and the retard roller. See
"Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
b After you replace the transfer belt unit, the 2nd BTR, and the retard
roller, click Chart Print on the Diagnosis tab.
c Click Pitch Configuration Chart.
Contact Dell.
The Pitch Configuration Chart is printed.
Does this solve your problem?
Vertical blanks
Action
Yes
No
1
The task is complete.
Go to action 2.
Clean inside the printer by using the cleaning rod. See "Cleaning the
Raster Optical Scanner (ROS) Window."
a After the cleaning is completed, click Chart Print on the Diagnosis
tab.
b Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
Troubleshooting Guide
379
Action
Yes
No
2
The task is complete.
Go to action 3.
The task is complete.
Contact Dell.
Action
Yes
No
1
Proceed to the action
corresponding to the
type of ghosting.
Contact Dell.
Ensure the light path is not covered.
a Remove the drum cartridges, and keep them in the dark place. See
"Removing the Drum Cartridge."
b Check the light path, and then remove the shielding.
c Re-install the drum cartridges. See "Installing a Drum Cartridge."
d Launch the Tool Box, and click Chart Print on the Diagnosis tab.
e Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
3
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
Ghosting
Locate the cause of the problem using the Ghost Configuration Chart.
a Launch the Tool Box, and click Chart Print on the Diagnosis tab.
b Click Ghost Configuration Chart.
The Ghost Configuration Chart is printed.
2a
Positive ghost - 2a
Is the type of the problem identified?
Negative ghost - 2b
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click Ghost Configuration Chart.
The task is complete.
Contact Dell.
The task is complete.
Go to action 3.
The Ghost Configuration Chart is printed.
Does this solve your problem?
2b
If you are using non-recommended print media, use the print media
recommended for the printer.
Does this solve your problem?
380
Troubleshooting Guide
Action
3
Yes
No
Adjust the transfer bias.
The task is complete.
a On the operator panel, press the
(Menu) button and select
Admin Settings→ Maintenance→ Adjust Transfer
Belt Unit.
b Select K Offset or YMC Offset, and then decrease the value.
c Launch the Tool Box, and click Chart Print on the Diagnosis tab.
d Click Ghost Configuration Chart.
Contact Dell.
The Ghost Configuration Chart is printed.
Does this solve your problem?
Light-induced fatigue
Action
Yes
No
1
Go to action 2.
Contact Dell.
The task is complete.
Contact Dell.
Check the light fatigue pattern using the Pitch Configuration Chart.
a Launch the Tool Box, and click Chart Print on the Diagnosis tab.
b Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does the pattern on the output match with that on the Pitch
Configuration Chart?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
Does this solve your problem?
Troubleshooting Guide
381
Fog
Action
Yes
No
1
The task is complete.
Contact Dell.
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Contact Dell.
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click 4 Colors Configuration Chart.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
Bead-Carry-Out (BCO)
If the printer is installed in a high altitude location, set the altitude of
the location.
a Launch the Tool Box, and click Maintenance on the Printer
Maintenance tab.
b Under Adjust Altitude, select the value close to the altitude of the
location where the printer is installed.
Does this solve your problem?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
Does this solve your problem?
382
Troubleshooting Guide
Jagged characters
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Go to action 3.
The task is complete.
Go to action 4.
The task is complete.
Go to action 5.
Set Screen to Fineness in the printer driver.
a On the Others tab, set Screen under Items: to Fineness.
Does this solve your problem?
2
Set Print Mode to High Quality in the printer driver.
a On the Graphics tab, select High Quality from Print Mode.
3
Enable Bitmap Smoothing in the printer driver.
a On the Others tab, set Bitmap Smoothing under Items: to On.
Does this solve your problem?
Does this solve your problem?
4
Enable Print Page Mode in the printer driver.
a On the Others tab, set Print Page Mode under Items: to On.
Does this solve your problem?
5
If using a downloaded font, ensure that the font is recommended for the The task is complete.
printer, operating system, and the application being used.
Contact Dell.
Does this solve your problem?
Banding
Action
Yes
No
1
Proceed to the action
corresponding to the
location of the
problem:
Contact Dell.
Locate the cause of the problem using the Pitch Configuration Chart.
a Launch the Tool Box, and click Chart Print on the Diagnosis tab.
b Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Is the cause of the problem located?
• Drum cartridge - 2
• Fusing unit - 3
• Transfer belt unit - 4
Troubleshooting Guide
383
Action
Yes
No
2
The task is complete.
Contact Dell.
Replace the fusing unit.
The task is complete.
a Replace the fusing unit. See "Replacing the Fusing Unit."
b After you replace the fusing unit, click Chart Print on the Diagnosis
tab.
c Click Pitch Configuration Chart.
Contact Dell.
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b After you replace the drum cartridges, click Chart Print on the
Diagnosis tab.
c Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
3
The Pitch Configuration Chart is printed.
Does this solve your problem?
4
Replace the transfer belt unit, the 2nd BTR, and the retard roller.
The task is complete.
a Replace the transfer belt unit, the 2nd BTR, and the retard roller. See
"Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
b After you replace the transfer belt unit, the 2nd BTR, and the retard
Contact Dell.
roller, click Chart Print on the Diagnosis tab.
c Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
Auger mark
Action
Yes
No
1
Go to action 2.
Contact Dell.
The task is complete.
Contact Dell.
Locate the cause of the problem using the Pitch Configuration Chart.
a Launch the Tool Box, and click Chart Print on the Diagnosis tab.
b Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does the output match with the pattern for auger mark?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
Does this solve your problem?
384
Troubleshooting Guide
Wrinkled/Stained paper
Action
Yes
No
1
The task is complete.
If printing on an
envelope, go to action
2.
Verify that the correct print media is being used. See "Supported Paper
Types." If not, use the print media recommended for the printer.
Does this solve your problem?
If printing on print
media other than
envelopes, contact Dell.
2
Check the wrinkle. Is the wrinkle within 30 mm of the four edges of the
envelope?
This type of wrinkle is
considered normal.
Your printer is not at
fault.
Go to action 3.
3
Load the envelopes in the MPF properly. For details, see "Loading an
Envelope in the MPF."
The task is complete.
Contact Dell.
Action
Yes
No
1
The task is complete.
(MPF)
Go to action 2.
Does this solve your problem?
Damage on the leading edge of paper
When you use the MPF, reverse the paper and then try again.
When you use any of the trays, change the paper and then try again.
(trays)
Contact Dell.
Does this solve your problem?
2
Change the paper with another one and then try again.
The task is complete.
Go to action 3.
The task is complete.
Contact Dell.
Does this solve your problem?
3
Use any of the trays in place of the MPF.
Does this solve your problem?
Troubleshooting Guide
385
Jam/Alignment Problems
NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or Dell Printer
Configuration Web Tool. For information on how to use the operator panel and Dell Printer Configuration Web Tool, see
"Understanding the Printer Menus" and "Dell™ Printer Configuration Web Tool."
•
The top and side margins are incorrect
•
Color registration is out of alignment
•
Images are skewed
•
Tray1/Optional 550-Sheet Feeder Misfeed Jam
•
MPF Misfeed Jam
•
Regi Jam (Exit Sensor On JAM)
•
Exit Jam (Exit Sensor Off JAM)
•
Tray1/Optional 550-Sheet Feeder Multi-feed Jam
•
MPF Multi-feed Jam
The top and side margins are incorrect
Action
1
Yes
Ensure that the margins are set correctly on the application being used. The task is complete.
No
Contact Dell.
Does this solve your problem?
Color registration is out of alignment
Action
1
Yes
Adjust the settings of the paper type on the printer driver to those of the The task is complete.
tray.
Does this solve your problem?
386
Troubleshooting Guide
No
Go to action 2.
Action
Yes
No
2
The task is complete.
Go to action 3.
Execute auto color registration adjustment.
a On the operator panel, press the
(Menu) button and select
Admin Settings→ Maintenance→ Color Reg
Adjust→ Auto Correct→ Start.
OR
a Launch the Tool Box, and click Maintenance on the Printer
Maintenance tab.
b Click Start under Auto Correct in Color Registration Adjustments.
Does this solve your problem?
3
Do you have spare drum cartridges?
Go to action 4a.
Go to action 4b.
4a
Replace the drum cartridges.
a Replace the drum cartridges. See "Replacing the Drum Cartridges."
b Launch the Tool Box, and click Maintenance on the Printer
Maintenance tab.
c Click Start under Print Color Regi Chart in Color Registration
Adjustments.
The task is complete.
Contact Dell.
Print the Color Regi Configuration Chart and manually correct the color The task is complete.
registration.
a Launch the Tool Box, and click Maintenance on the Printer
Maintenance tab.
b Click Start under Print Color Regi Chart in Color Registration
Adjustments.
Contact Dell.
The Color Regi Configuration Chart is printed.
Does this solve your problem?
4b
The Color Regi Configuration Chart is printed.
c Identify the offset values from the chart and specify each value for
process, left, and right colors in Registration Adjustments. See
"Adjusting Color Registration" for details.
d Click Apply New Settings.
e Click Start under Print Color Regi Chart to print the Color Regi
Configuration Chart again.
Does this solve your problem?
Images are skewed
Action
Yes
No
1
The task is complete.
Go to action 2.
Adjust the paper guides properly.
Does this solve your problem?
Troubleshooting Guide
387
Action
2
Yes
Install the transfer belt unit according to an appropriate procedure. See The task is complete.
"Installing a Transfer Belt Unit."
No
Contact Dell.
Does this solve your problem?
Tray1/Optional 550-Sheet Feeder Misfeed Jam
Action
Yes
No
1
The task is complete.
Proceed to the action
corresponding to the
type of the print media
being used:
Ensure that tray1 or the optional 550-sheet feeder is properly inserted.
Does this solve your problem?
• Thick - 2a
• Thin - 2b
• Coated - 2c
If using paper other
than the above, go to
action 2d.
2a
Use thick paper that is 216 g/m2 or less.
The task is complete.
Go to action 3a.
The task is complete.
Go to action 3a.
The task is complete.
Go to action 3b.
The task is complete.
Go to action 3a.
Does this solve your problem?
2b
Use thin paper that is 60 g/m2 or more.
Does this solve your problem?
2c
Load coated paper one sheet at a time.
Does this solve your problem?
2d
Ensure that the print media is not curled.
Does this solve your problem?
2e
Is the print media damp?
Go to action 3c.
Go to action 3a.
3a
Fan the print media.
The task is complete.
Go to action 3b.
The task is complete.
Go to action 4b.
The task is complete.
Go to action 4a.
The task is complete.
Go to action 3a.
The task is complete.
Contact Dell.
Does this solve your problem?
3b
Wipe the retard roller in tray1 or the optional 550-sheet feeder with a
cloth moistened with water.
Does this solve your problem?
3c
Turn over the print media.
Does this solve your problem?
4a
Use print media that is not damp.
Does this solve your problem?
4b
Replace the drum cartridges.
Does this solve your problem?
388
Troubleshooting Guide
MPF Misfeed Jam
Action
Yes
No
1
The task is complete.
Proceed to the action
corresponding to the
type of the print media
being used:
Ensure that the MPF is properly inserted.
Does this solve your problem?
• Thick - 2a
• Thin - 2b
• Coated - 2c
• Envelope - 2d
If performing manual
duplex printing, go to
action 2e.
If using paper other
than the above or if not
performing manual
duplex printing, go to
action 2f.
2a
Use thick paper that is 216 g/m2 or less.
The task is complete.
Go to action 3a.
The task is complete.
Go to action 3a.
The task is complete.
Go to action 3b.
Ensure that the envelope is properly loaded in the MPF as instructed in The task is complete.
"Loading an Envelope in the MPF."
Go to action 3c.
Does this solve your problem?
2b
Use thin paper that is 60 g/m2 or more.
Does this solve your problem?
2c
Load coated paper one sheet at a time.
Does this solve your problem?
2d
Does this solve your problem?
2e
Ensure that the print media is not curled.
The task is complete.
Go to action 3a.
2f
Is the print media damp?
Go to action 3d.
Go to action 3a.
3a
Fan the print media.
The task is complete.
Go to action 3b.
The task is complete.
Go to action 4b.
The task is complete.
Go to action 3a.
The task is complete.
Go to action 4a.
The task is complete.
Go to action 3a.
The task is complete.
Contact Dell.
Does this solve your problem?
3b
Wipe the retard roller in the MPF with a cloth moistened with water.
Does this solve your problem?
3c
If the envelope is deformed, correct it or use another envelope.
Does this solve your problem?
3d
Turn over the print media.
Does this solve your problem?
4a
Use print media that is not damp.
Does this solve your problem?
4b
Replace the drum cartridges.
Does this solve your problem?
Troubleshooting Guide
389
Regi Jam (Exit Sensor On JAM)
Action
Yes
No
1
The task is complete.
Go to action 2.
The task is complete.
Go to action 3.
The task is complete.
Go to action 4.
Replace the fusing unit.
The task is complete.
a Replace the fusing unit. See "Removing the Fusing Unit."
b After you replace the fusing unit, click Chart Print on the Diagnosis
tab.
c Click Pitch Configuration Chart.
Go to action 5.
Ensure that the drum cartridges are installed correctly.
Does this solve your problem?
2
Replace the drum cartridges. See "Replacing the Drum Cartridges."
Does this solve your problem?
3
Ensure that the fusing unit is set properly.
Does this solve your problem?
4
The Pitch Configuration Chart is printed.
Does this solve your problem?
5
Ensure that the transfer belt unit is installed correctly.
The task is complete.
Go to action 6.
Does this solve your problem?
6
Replace the transfer belt unit, the 2nd BTR, and the retard roller.
The task is complete.
a Replace the transfer belt unit, the 2nd BTR, and the retard roller. See
"Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
b After you replace the transfer belt unit, the 2nd BTR, and the retard
roller, click Chart Print on the Diagnosis tab.
c Click Pitch Configuration Chart.
Contact Dell.
The Pitch Configuration Chart is printed.
Does this solve your problem?
Exit Jam (Exit Sensor Off JAM)
Action
Yes
No
1
The task is complete.
Go to action 2.
Ensure the fusing unit is installed correctly.
Does this solve your problem?
2
The task is complete.
Replace the fusing unit.
a Replace the fusing unit. See "Replacing the Fusing Unit."
b After you replace the fusing unit, click Chart Print on the Diagnosis
tab.
c Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does this solve your problem?
390
Troubleshooting Guide
Contact Dell.
Tray1/Optional 550-Sheet Feeder Multi-feed Jam
Action
Yes
No
1
The task is complete.
If using coated paper,
go to action 2.
Ensure that tray1 or the optional 550-sheet feeder is properly inserted.
Does this solve your problem?
2
Load coated paper one sheet at a time.
If using other type of
print media, go to
action 3.
The task is complete.
Go to action 4.
The task is complete.
Go to action 4.
The task is complete.
Go to action 5.
Does this solve your problem?
3
Use print media that is not damp.
Does this solve your problem?
4
Fan the print media.
Does this solve your problem?
5
Wipe the retard roller in tray1 or the optional 550-sheet feeder where the The task is complete.
multi-feed occurred with a cloth moistened with water.
Contact Dell.
Does this solve your problem?
MPF Multi-feed Jam
1
Ensure the media type you are using.
-
-
The task is complete.
Go to action 4.
The task is complete.
Go to action 4.
The task is complete.
Go to action 5.
If using coated paper, go to action 2.
If using other type of print media, go to action 3.
2
Load coated paper one sheet at a time.
Does this solve your problem?
3
Use print media that is not damp.
Does this solve your problem?
4
Fan the print media.
Does this solve your problem?
5
Wipe the retard roller in the MPF where the multi-feed occurred with a The task is complete.
cloth moistened with water.
Contact Dell.
Does this solve your problem?
Noise
Action
Yes
No
1
The task is complete.
Go to action 2.
To specify the cause of the noise, perform the Auto Registration
Adjustment.
Does this solve your problem?
Troubleshooting Guide
391
2
Replace the transfer belt unit, the 2nd BTR, and the retard roller.
The task is complete.
a Replace the transfer belt unit, the 2nd BTR, and the retard roller. See
"Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
b After you replace the transfer belt unit, the 2nd BTR, and the retard
roller, click Chart Print on the Diagnosis tab.
c Click Pitch Configuration Chart.
Go to action 3.
The Pitch Configuration Chart is printed.
Does this solve your problem?
3
Replace the fusing unit.
a Replace the fusing unit. See "Replacing the Fusing Unit."
b After you replace the fusing unit, click Chart Print on the Diagnosis
tab.
c Click Pitch Configuration Chart.
The task is complete.
Go to action 4.
The task is complete.
Go to action 5.
The task is complete.
Go to action 6.
The Pitch Configuration Chart is printed.
Does this solve your problem?
4
Replace the waste toner box.
Does this solve your problem?
5
Replace the drum cartridges.
Does this solve your problem?
6
Replace the toner cartridge (K). See "Replacing the Toner Cartridges."
The task is complete.
Go to action 7.
(The toner cartridge
(K) you are using has
been damaged. Replace
it with a new one.)
7
Replace the toner cartridge (Y). See "Replacing the Toner Cartridges."
Go to action 8.
The task is complete.
(The toner cartridge
(Y) you are using has
been damaged. Replace
it with a new one.)
8
Replace the toner cartridge (M). See "Replacing the Toner Cartridges."
The task is complete.
Go to action 9.
(The toner cartridge
(M) you are using has
been damaged. Replace
it with a new one.)
392
Troubleshooting Guide
9
Replace the toner cartridge (C). See "Replacing the Toner Cartridges."
The task is complete.
Contact Dell.
(The toner cartridge
(C) you are using has
been damaged. Replace
it with a new one.)
Digital Certificate Problem
Symptom
Cause
Action
The LDAP-SSL/TLS
Communication setting and the
Upload Signed Certificate button
are not displayed.
The optional hard disk installed in
the printer is not encrypted.
Confirm whether the optional hard disk is
connected correctly, and confirm whether Data
Encryption is enabled from the operator panel or
Dell Printer Configuration Web Tool.
The certificate import button is
disabled.
SSL communication is disabled.
Create a self-signed certificate and enable SSL.
The certificate details button is
disabled.
The certificate cannot be imported. The time setting is incorrect.
The certificate file is incorrect.
Confirm validity period of the certificate as well as
the time setting of the device.
Confirm whether the password is correct.
Confirm whether the file type is PKCS#7/#12 or
x509CACert (extension: p7b/p12/pfx/cer/crt).
Confirm whether the attribute information (key
Usage/Extended key usage) of the certificate to be
imported is set correctly.
The browser is incorrect.
Use Internet Explorer.
016-404 is displayed when setting
the encryption of the optional hard
disk to Off.
The optional hard disk is formatted After initializing, import the certificate and enable
and the certificate data is deleted
the security settings again. The action is the same
when setting encryption of the
when formatting the optional hard disk.
optional
hard
disk
to
Off.
Since
a
016-404 is displayed when
certificate is required and the
formatting the optional hard disk.
security function cannot be enabled
Security is set to Off when setting
when restarting the device afterward,
encryption of the optional hard disk 016-404 is displayed and the security
to Off.
setting must be initialized. The
cause is the same when formatting or
Security is set to Off when
removing the optional hard disk.
formatting the optional hard disk.
A certificate is deleted when setting
encryption of the optional hard disk
to Off.
A certificate is deleted when
formatting the optional hard disk.
Troubleshooting Guide
393
Symptom
Cause
Action
A certificate cannot be set with
"Certificate Details".
The validity period is invalid.
The validity period of the certificate is invalid.
Confirm whether the time setting of the machine is
correct, and whether the validity period of the
certificate has expired.
The certificate path is invalid.
The certificate chain (path validation) of the
imported certificate may not be correctly validated.
Confirm whether all of the high-level certificates
(Trusted/Intermediate) have been imported and are
not deleted, and whether the validity period has
expired.
Although a certificate was imported, The type of the certificate is
it is not displayed when selecting
incorrect.
with "Local Device".
To import a certificate for use with the device (own
device), import the secret key and a certificate of
the PKCS#12 (p12/pfx) format as a pair.
Server validation is not operating
correctly.
Although importing a root certificate (Trusted) to
use for server authentication, an Intermediate
certificate may be required when validating the
path.
The certificate chain is incorrect
when importing.
When executing a certificate file with the
certification authority, create the certificate with a
format including all paths and then import that
certificate.
Digital Signature cannot be selected The certificate cannot be associated. Either the certificate has not been imported or the
with the IPsec setting.
certificate has not been associated for use with
Digital Signature of IPsec. Refer to "Setting the
Certificate in the IPsec Digital Signature Mode" to
set a certificate of IPsec.
394
Troubleshooting Guide
Problems With Installed Optional Accessories
If an option does not operate correctly following installation or stops working:
•
Turn off the printer, wait for 10 seconds, and then turn on the printer. If this does not fix the problem, unplug the
printer, and check the connection between the option and the printer.
•
Print the printer settings report to see if the option is listed in the Installed Options list. If the option is not listed,
re-install it. See "Report / List."
•
Ensure the option is selected in the printer driver you are using.
The following table lists printer's option and corrective action for related problem. If the suggested corrective action
does not correct the problem, call customer service.
Problem
Action
550-sheet feeder
• Ensure the 550-sheet feeder is correctly installed on the printer. Re-install the
feeder. See "Removing the Optional 550-Sheet Feeder" and "Installing the
Optional 550-Sheet Feeder."
• Ensure the print media is loaded correctly. See "Loading Print Media in Tray1 and
the Optional 550-Sheet Feeder" for more information.
Memory module
• Ensure the memory module is securely connected to the memory connector.
Hard disk
• Ensure the hard disk is securely inserted to the correct slot.
Wireless adapter
• Ensure the wireless adapter is securely inserted to the correct slot.
Other Problems
Problem
Action
Condensation has occurred inside the
printer.
This usually occurs within several hours after you heat the room in winter. This
also occurs when the printer is operating in a location where relative humidity
reaches 85% or more. Adjust the humidity or relocate the printer to an appropriate
environment.
Contacting Service
When you call for printer service, be prepared to describe the problem you are experiencing or the error message that
appears.
You need to know the model type and service tag of your printer. See the label located inside the front cover of your
printer.
Troubleshooting Guide
395
396
Troubleshooting Guide
Appendix
Appendix..................................................................................... 397
Index............................................................................................ 401
397
398
Appendix
Dell™ Technical Support Policy
Technician-assisted technical support requires the cooperation and participation of the customer in the
troubleshooting process and provides for restoration of the operating system, software program and hardware drivers
to the original default configuration as shipped from Dell, as well as the verification of appropriate functionality of
the printer and all Dell-installed hardware. In addition to this technician assisted technical support, online technical
support is available at Dell Support. Additional technical support options may be available for purchase.
Dell provides limited technical support for the printer and any Dell-installed software and peripherals. Support for
third-party software and peripherals is provided by the original manufacturer, including those purchased and/or
installed through Software & Peripherals (DellWare), ReadyWare, and Custom Factory Integration (CFI/DellPlus).
Online Services
You can learn about Dell products and services on the following websites:
www.dell.com
www.dell.com/ap (Asian/Pacific countries only)
www.dell.com/jp (Japan only)
www.euro.dell.com (Europe only)
www.dell.com/la (Latin American and Caribbean countries)
www.dell.ca (Canada only)
You can access Dell Support through the following websites and e-mail addresses:
•
Dell Support websites
support.dell.com
support.jp.dell.com (Japan only)
support.euro.dell.com (Europe only)
•
Dell Support e-mail addresses
mobile_support@us.dell.com
support@us.dell.com
la-techsupport@dell.com (Latin America and Caribbean countries only)
apsupport@dell.com (Asian/Pacific countries only)
•
Dell Marketing and Sales e-mail addresses
apmarketing@dell.com (Asian/Pacific countries only)
sales_canada@dell.com (Canada only)
•
Anonymous file transfer protocol (FTP)
ftp.dell.com
Log in as user: anonymous, and use your e-mail address as your password.
Appendix
399
Warranty and Return Policy
Dell Computer Corporation ("Dell") manufactures its hardware products from parts and components that are new or
equivalent to new in accordance with industry-standard practices. For information about the Dell warranty for your
printer, see support.dell.com.
Recycling Information
It is recommended that customers dispose of their used computer hardware, monitors, printers, and other peripherals in an environmentally
sound manner. Potential methods include reuse of parts or whole products and recycling of products, components, and/or materials.
For specific information on Dell’s worldwide recycling programs, see www.dell.com/recyclingworldwide.
Contacting Dell
You can access Dell Support at support.dell.com. Select your region on the WELCOME TO DELL SUPPORT page,
and fill in the requested details to access help tools and information.
You can contact Dell electronically using the following addresses:
•
World Wide Web
www.dell.com
www.dell.com/ap (Asian/Pacific countries only)
www.dell.com/jp (Japan only)
www.euro.dell.com (Europe only)
www.dell.com/la (Latin American and Caribbean countries)
www.dell.ca (Canada only)
•
Anonymous file transfer protocol (FTP)
ftp.dell.com
Log in as user: anonymous, and use your email address as your password.
•
Electronic Support Service
mobile_support@us.dell.com
support@us.dell.com
la-techsupport@dell.com (Latin America and Caribbean countries only)
apsupport@dell.com (Asian/Pacific countries only)
support.jp.dell.com (Japan only)
support.euro.dell.com (Europe only)
•
Electronic Quote Service
apmarketing@dell.com (Asian/Pacific countries only)
sales_canada@dell.com (Canada only)
400
Appendix
Index
Symbols
AirPrint, 149, 162, 254
(Back) button, 118
Alert Tone, 133, 138, 173, 177
(Cancel) button, 117
Alignment Chart, 185
(Menu) button, 118
All Tones, 133, 139
(Power Saver) button, 117
Altitude, 308
(Set) button, 118
Appendix, 399
Apply New Settings, 128
Numerics
1000Base-T Full-Duplex, 152
100Base-TX Full-Duplex, 152
100Base-TX Half-Duplex, 152
10Base-T Full-Duplex, 152
10Base-T Half-Duplex, 152
2 Sided Print, 134
2 Sided Printing, 135, 175, 184
2nd BTR, 28, 324
4 Colors Configuration Chart, 185
802.1x, 150, 167
Asset Tag Number, 121, 131
Assigning IP address, 71
Audio Tone, 173, 176
Authenticate Error Trap, 159
Authentication System, 275
Auto Clear Alert Tone, 133, 138, 173, 177
Auto Color To Mono Print, 209
Auto Correct, 145, 179
Auto Log Print, 133, 139, 172, 177, 205
Auto Reg Adjust, 212
Auto Registration Adjustment, 136, 144, 173
Auto Reset, 133, 139, 172, 176
AutoIP, 199
A
Avoiding paper jams, 243, 355
A4, 233
A4<>Letter Switch, 172, 177, 205
A5, 233
About printer, 27
Access List, 167
Ad-Hoc, 160
Adjust 2nd BTR, 135, 143, 211
Adjust Altitude, 136, 146, 173, 179
Adjust Fusing Unit, 136, 144, 212
Adjust Transfer Belt Unit, 143
Adjusting color registration, 342
Admin Settings, 188
Administrator Account, 160
B
B5, 233
Banding Detection Chart, 185
Banner Sheet Insert Position, 133, 139, 172, 177
Banner Sheet Specify Tray, 133, 139, 172, 177
Base memory, 307
Basic Information, 151
Basic printer problems, 371
Bitmapped font, 294
Bonjour (mDNS), 149, 152
BOOTP, 199
Appendix
401
C
Connection type, 65, 309
C5, 233
Conserving supplies, 313
Cable, 309
Contact Dell Support at, 125, 127
Canceling a print job, 244
Contact Person, 126
Canceling print job
From your computer, 244
Contacting service, 395
Carbonless copy paper, 230
Control Panel Tone, 138, 173, 176
CCP, 230
Copy Printer Settings, 125, 127, 167
Changing printer settings, 128, 256
Copy Printer Settings Report, 168
Changing the Language, 119
Cover, 131
Clear Storage, 145
Covers, 135-136, 144, 211-212
Clearing paper jams, 355
From fusing unit, 360
From MPF, 356
From optional 550-sheet feeder, 366
From tray1, 359
Covers Thick, 135-136, 144, 211-212
Clock Settings, 136
Coated, 135-136, 144, 211-212
Coated Thick, 135-136, 144, 211-212
Collation, 134, 175, 184
Color Reg Adjust, 213
Color Regi Chart, 145
Color Registration Adjustments, 145, 179
Color registration chart, 342
Color Test Page, 138, 174, 188
ColorTrack, 273
ColorTrack Error Report, 136, 274
ColorTrack Mode, 136, 274
ColorTrack Settings, 273
Community Name, 159
Completed Jobs, 124, 132
Configure 802.1x, 167
Configuring wireless adapter, 51
Connecting local printer, 66
Connecting printer, 65
Connecting to the network, 67
Connection specification, 65, 309
Connection Time-Out, 154
402
Appendix
Control board, 28
Custom Paper Size - X, 134, 140
Custom Paper Size - Y, 134, 140
D
Data Encryption, 281
Date & Time, 173, 176
Date Format, 136, 173, 176
Default Color, 134, 140, 194
Default Paper Size, 133, 139, 172, 177
Dell ColorTrack, 136, 168, 273
Dell Printer Configuration Web Tool, 121
Page display format, 126
Dell Service Tag Number, 131
Dell Supplies Management System, 261
Dell support website, 22
Dell technical support policy, 399
Details, 131
Determining Values, 342
DHCP, 199
Digital Certificates, 281
Dimensions, 307
DIMM size, 307
Direct connection setup, 80
Disabling Panel Lock, 226
Display of Dell Configuration Web Tool, 184
Display problems, 371
Fault Time-out, 133, 139, 172, 176
DL, 233
Fault Tone, 133, 138, 173, 176
DNS, 148, 154
Finding information, 21
Draft Mode, 134, 140, 193
Firmware Version, 131
Driver, 21
Flip on Long Edge, 247
Drum cartridge, 27, 317
Flip on Short Edge, 247
Duplex unit, 28
Folio, 233
E-Mail Alert Setup Page, 150
Font, 134, 140, 293
PCL 5/PCL 6, 295
Pitch, 293
Point size, 293
PostScript 3, 295
Style, 293
Typefaces and fonts, 293
Weight, 293
E-Mail Server Settings, 150, 156
Font Pitch, 134, 140, 192
Emulations, 307
Font Size, 134, 140, 191
Encryption, 160-161
Form Line, 134, 140, 192
End Time, 142
Front cover, 27
Entering Values, 344
Front USB port, 27
Envelope, 135-136, 144, 211-212, 231
Function Enabled, 141, 215
Envelope #10, 233
Fusing unit, 28, 322, 356, 360
E
E-Mail Alert, 125, 127, 152, 156, 200
E-Mail Alert Settings, 151, 157
E-Mail Alert Setup, 121
Environment, 308
Error codes, 301
Error History, 138, 174, 188
Ethernet, 147, 152, 309
Ethernet port, 28, 65, 67
Event Panel, 126
EWS, 200
EWS Settings, 151
G
Gateway Address, 153, 174, 183, 200
Get Environment Sensor Info, 185
Ghost Configuration Chart, 185
Google Cloud Print, 149, 162, 254
Executive, 233
H
Expiration Mode, 142
Hard disk, 58
Expiration Time, 143
Hex Dump, 134, 140, 193
Express Service Code, 131
Host I/F, 132
External Authentication, 273
Host Name, 132, 158, 164
How to install option, 37
F
Fast scan, 343
How to remove option, 347
How to set up, 22
How to use printer, 21
Appendix
403
HTTP, 149, 155
Job Time-out, 133, 139, 172, 176, 203
HTTP-SSL/TLS Communication, 283
K
I
Kerberos Server, 275
ID, 131-132
Identifying print media, 233
Image Enhance, 134, 140
Impression Number, 132
Infrastructure, 160
Initialize NIC NVRAM Memory and restart
printer, 163
L
Label, 135-136, 144, 173, 179, 211-212, 232
Landscape, 190
Layout, 134
LCD panel, 117
Initialize Print Meter, 179, 213
LDAP Authentication, 278
Installing optional 550-Sheet Feeder, 42
LDAP Server, 164, 276-277
Installing optional accessories, 37
LDAP-SSL/TLS Communication, 287-288
Installing optional hard disk, 58
Left frame, 127
Installing optional memory module, 37
Left side cover, 28
Installing optional wireless adapter, 47
Legal, 233
Interfaces, 308
Letter, 233
Invalid Key Tone, 133, 138, 173, 176
Letterhead 2 Sided, 133, 139, 172, 178
IP Address, 71, 121, 124, 126, 147, 153, 159, 164,
166-167, 174, 183, 199, 276-277
Line Termination, 134, 140, 193
IP Address Mode, 174, 183
Link Local Address, 174
IP Filter (IPv4), 150, 167
Link Quality, 160
IP filter setup, 155
Loading letterhead, 235
IPP, 148, 152, 154
Loading paper, 75
IPsec, 166, 286
Loading print media, 235
MPF, 237
Tray1 and optional 550-sheet feeder, 235
IPsec Settings, 150, 166
IPv4, 159, 166
IPv6, 126, 148, 154, 159, 166
Link Channel, 160
Location, 126, 131
Login Error, 142
Low Toner Alert Message, 133, 139, 172, 178
J
Low Toner Alert Tone, 133, 138, 173, 177
Job Completed Tone, 133, 138, 173, 176
LPD, 148, 152, 154, 200
Job History, 138, 174, 187
Job List, 124, 131
Job Name, 132
Job Status, 132
Job Submitted Time, 132
404
Appendix
M
MAC Address, 160
Machine Ready Tone, 133, 138, 173, 176
Maintenance, 313
Non Registered User, 136, 274
Manual Address, 174
Non-Dell Toner, 136, 173, 179, 214
Maximum memory, 307
Number pad, 117-118
Memory, 307
Memory Capacity, 131
Memory connector, 307
Memory module, 37, 347
Memory speed, 307
Menu item, 128
Menu Settings, 132
MIB compatibility, 308
mm / inch, 132, 138, 172, 177
Monarch, 233
Monthly Settings, 143
MPF, 356
MPF Custom Paper Size - X, 137, 169
MPF Custom Paper Size - Y, 137, 169
MPF Custom Size - X, 174, 180
MPF Custom Size - Y, 174, 180
MPF Display Popup, 137, 169, 174, 180
MPF Mode, 174, 180
MPF Paper Size, 137, 169, 174, 180
MPF Paper Type, 137, 169, 174, 180
MQ Chart, 185
Multiple Up, 313
Multiple-Up, 135, 175, 184, 225
Multipurpose feeder (MPF), 27, 356
N
NCR, 230
Network, 67
Network connection setup, 82
Network Firmware Version, 131
Network Type, 160
New Password, 141
No carbon required paper, 230
No. of Sheets, 132
O
OCR, 230
Online Help, 125, 127
Operation, 308
Operator panel, 27, 29
Operator Panel Buttons, 117
Optical character recognition, 230
Optional 550-sheet feeder, 27, 356, 366
Order Supplies at, 125, 127
Ordering supplies, 31, 313
Orientation, 134, 140, 190
OS, 308
OS compatibility, 307
Other problems, 395
Out of Paper Alert Tone, 173, 177
Out of Paper Tone, 133, 138
Output Color, 135, 175, 184
Output Result, 132
Output Size, 134
Output Tray, 131
Output tray extension, 27
Owner, 132
P
Page display format, 126
Page orientation, 236
Panel, 199
Panel Language, 133, 139, 175, 183, 220
Panel Lock Control, 134, 141, 215
Panel Settings, 137, 173, 187
Panel Settings Report, 119, 137
Paper, 229
Appendix
405
Characteristics, 229
Curl, 229
Fiber content, 230
Grain direction, 229
Moisture content, 229
Smoothness, 229
Weight, 229
Paper Density, 135, 143, 173, 179, 210
Power supply, 307
Power switch, 27
Premier, 136
Print Color Regi Chart, 179
Print Drivers / Remote Client Account, 160
Print ID, 133, 139, 172, 177, 206
Paper jam location, 356
Print media, 229, 313
Source, 236
Paper Size, 134, 140, 189
Print Meter, 138, 174
Paper Tray, 134
Print Mode, 134
Paper Used, 168
Print quality guarantee, 308
Parts name, 27
Print Server Reports, 147
Password, 155, 160, 163-164, 167, 274, 277, 279
Print Server Settings, 124, 127, 146, 151, 184
PCL, 188
Font, 190
Print Server Setup Page, 147
PCL 5/PCL 6, 295
PCL Fonts List, 138, 173, 187
PCL Macros List, 138, 173, 187
PCL printer driver, 80, 82
PCL Settings, 134, 140
PDF Fonts List, 138, 174
PDL, 307
Peer-to-Peer, 95
Pitch Configuration Chart, 185
Plain, 135-136, 144, 173, 179, 211-212
Plain Thick, 135-136, 144, 211-212
Point and Print, 92
Port Settings, 151
Port Status, 152
Port9100, 148, 152, 154, 200
Portrait, 190
Power connector, 28
Power Saver Time - Deep Sleep, 132, 138
Power Saver Time - Sleep, 132, 138
Power Saver Timer, 176, 202
Power Saver Timer - Auto-Off Timer, 172, 202
Power Saver Timer - Deep Sleep, 172
Power Saver Timer - Sleep, 172
406
Appendix
Print side, 236
Print Text, 133, 139, 172, 177, 206
Print Volume, 125, 127, 168
Printer driver, 105, 107, 278
Printer Events, 131
Printer Information, 125, 127, 131
Printer Jobs, 124, 127, 131
Printer Maintenance, 143
Printer Page Count, 168
Printer paper, 229
Printer Revision Levels, 131
Printer Serial Number, 131
Printer Settings, 124, 132, 137-138, 173, 187
Printer Settings page, 137
Printer software, 261
Printer specification, 307
Printer Status, 124, 127, 130
Printer Status Window, 261
Printer Type, 131
Printer utility software, 262
Printing, 243
Printing problems, 371
Printing Speed, 131
Private Mail Box Print, 221, 248-249
Reports, 137, 188
Problems with Optional Accessories, 395
Reset Defaults, 179
Processor Speed, 131
Reset Defaults and restart printer, 145
Product Information Guide, 22
Reset Print Server, 163
Proof Print, 223, 249
Resident fonts, 295
Proxy Server, 149, 162
Resident scalable fonts, 295
PS Fonts List, 138, 174
Restore Settings, 128
PS printer driver, 80, 82
Retard roller, 324
Public Mail Box Print, 222, 248-249
Return policy, 400
Right frame, 128
Q
Quantity, 134, 140, 192
Right side cover, 27
RSA BSAFE, 17
Quick Launch Utility, 262
Quick Reference Guide, 21
S
Safety information, 22
R
RAM Disk, 133, 139, 172, 177, 207
RARP, 199
Rear cover, 28
Recommended paper, 230
Recurrence, 142-143
Recycled, 136, 144, 211-212
Red Hat, 105
Red Hat Enterprise Linux, 105, 307
Re-enter Password, 141
Refresh, 128
Registration Adjustments, 179
Regular, 136
Relative humidity, 308
Remote Authentication, 274
Removing optional 550-sheet feeder, 349
Removing optional hard disk, 353
Removing optional memory module, 347
Removing optional wireless adapter, 351
Removing options, 347
Report 2 Sided Print, 172, 177
Scalable fonts, 294
Search Time-Out, 164, 277
Secure Print, 221, 248-249
Secure Settings, 134, 141
Security, 163
Security Settings, 160
Select Reorder URL, 136
Select Tray, 135, 175, 184, 224
Selecting letterhead, 231
Selecting paper, 230
Selecting preprinted form, 231
Selecting pre-punched paper, 231
Sending print job, 243
Server Response Time-Out, 275
Service code, 22
Service tag, 22
Set Available Time, 142
Set Date, 136, 173, 176
Set Password, 125, 127, 163
Set Time, 136, 173, 176
Shared printing, 91
Slow scan, 342, 344
Appendix
407
SMB, 149, 152
Time Zone, 136, 173, 176
SNMP, 149, 152
Toner cartridge, 27, 315
SNMP Configuration, 158
Toner cartridge level, 130
SNMP UDP, 200
Tool Box, 171, 262
Software and Documentation disc, 21
Top cover, 27
Software update, 262
Top frame, 126
SSID, 160
Transfer belt unit, 27, 324
SSL/TLS, 150, 165, 287
Trap Notification, 159
Start Time, 142
Tray 1 Custom Paper Size - X, 137, 169
Status LED, 117
Tray 1 Custom Paper Size - Y, 137, 169
Status Monitor Console, 261
Tray 1 Custom Size - X, 174, 181
Status Monitor Console for Linux, 267
Tray 1 Custom Size - Y, 174, 181
Status Monitor Widget for Macintosh, 263
Tray 1 Display Popup, 137, 169, 174, 181
Status of printer supplies, 313
Tray 1 Paper Size, 137, 169, 174, 181
Status Window, 262
Tray 1 Paper Type, 137, 169, 174, 181
Storage, 308
Tray 2 Custom Paper Size - X, 137, 170
Storage humidity range, 308
Tray 2 Custom Paper Size - Y, 137, 170
Stored Documents, 138, 174, 188
Tray 2 Custom Size - X, 175, 181
Storing consumables, 314
Tray 2 Custom Size - Y, 175, 181
Storing print media, 233, 243, 314
Tray 2 Display Popup, 137, 170, 174, 181
Straightest lines, 343
Tray 2 Paper Size, 137, 169, 175, 181
Subnet Mask, 174, 183, 199
Tray 2 Paper Type, 137, 169, 175, 182
Substitute Tray, 133, 139, 172, 178, 207
Tray Priority, 175, 182
Supported paper sizes, 233
Tray Settings, 125, 127, 137, 169, 174, 180, 216
Supported paper types, 234
Tray1, 27, 356, 359
SUSE, 307
Troubleshooting, 263, 371
SUSE Linux Enterprise Desktop 10, 108
Typeface, 293
SUSE Linux Enterprise Desktop 11, 110
Symbol Set, 134, 140, 191, 299
System Settings, 132, 138, 151, 172
Unacceptable paper, 230
UNITED STATES GOVERNMENT
RESTRICTED RIGHTS, 17
T
TCP/IP, 152
TCP/IP Settings, 147, 153
Telnet, 149, 152, 155
Temperature, 308
Time Format, 136, 173, 176
408
U
Appendix
Updater, 263
USB, 309
USB Direct Print, 141
USB Direct Print Defaults, 135
USB port, 28, 65-66, 134, 139
USB printing, 80
Use Another Tray, 172, 178
Use Manual Address, 174
User Setup Disk Creating Tool, 261
Using Dell Printer Configuration Web Tool, 124
V
Verifying IP settings, 73
W
Warranty, 400
Warranty information, 22
Waste toner box, 27, 332
Web Link Customization, 136, 146
Web services on devices, 252
Weekly Settings, 143
WEP, 161
Width guide, 76
WINS, 148, 154
Wired Network
Ethernet, 197
IP Filter, 201
Protocols, 200
Reset LAN, 201
TCP/IP, 199
Wireless Adapter, 47
Wireless adapter socket, 28
Wireless Settings, 147, 160
WPA-Enterprise, 288-289
WPA-PSK, 161
WPS-PBC, 55
WPS-PIN, 54
WSD, 148, 155, 252
X
XPS printer driver, 80, 83
Appendix
409
410
Appendix