ENGLISH
MODEL
XL-DAB1H
MICRO COMPONENT SYSTEM
OPERATION MANUAL
XL-DAB1H Micro Component System consisting of XL-DAB1H (main unit) and CP-DAB1H (speaker system).
Accessory
Please confirm that only the following accessory is
included.
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors.
It is advisable to avoid exposure to high volume levels.
Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Remote control x 1
Special note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
92L87501000701
XL-DAB1H_AUS (A5).indd C-1
10B R MW 1
6/21/2010 9:12:50 AM
Special notes
WARNINGS:
● When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by
remote control.
● This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
● To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
other than that which is specified is dangerous and
may result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
CAUTION:
● This product is classified as a CLASS 1 LASER
product.
● This product contains a low power laser device. To
ensure continued safety, do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying
or broadcasting such material without permission of the
relevant licensees or owners of the copyright is prohibited
by law. SHARP is not in a position to authorise the copying
or broadcasting of copyright materials and nothing in this
OPERATION MANUAL should be implied as giving that
authority.
For other countries:
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Please refer to the relevant laws
in your country.
E-1
XL-DAB1H_AUS (A5).indd 1
6/21/2010 9:12:51 AM
System connections
■
Precautions
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
10 cm (4”) of free space along the sides, top and back
of the equipment.
10 cm (4”) 10 cm (4”)
10 cm (4”)
10 cm (4”)
● Use the unit on a firm, level surface free from
vibration.
● Place the speakers at least 30 cm (12”) away from
any CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which
generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for
safety.
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental
aspects of battery disposal.
● This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
● The apparatus is designed for use in moderate
climates.
■
Speaker connection
● Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
● Use speakers with an impedance
of 4 ohms or more, as lower
Incorrect
impedance
speakers
can
damage the unit.
● Do not make a mistake when connecting the right and
left speakers. The right speaker is the one on the right
side when you face the unit.
● Do not let the bare speaker wires touch each
other.
● Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
● Do not stand or sit on the speakers. You may be
injured.
Make sure to unplug the AC power cord before making any connections.
DAB/FM aerial
The spec label (*)
The spec label
illustration may be
different from the
actual label used.
(*) Label is located at
the bottom of the
Wall socket
unit.
(AC 220 - 240 V ~ 50/60 Hz)
XL-DAB1H_AUS (A5).indd 2
Red
Black
Right
speaker
Left speaker
E-2
6/21/2010 9:12:51 AM
Remote control - battery installation
Note:
Before using remote control, please remove plastic shield
at battery holder.
1 Whilst pushing the locking tab towards the center of
the remote control, slide out the battery holder.
Remote
control
Plastic
shield
Battery holder
Back of remote
control
Locking tab
2 Remove the old battery from the battery holder, insert
the new battery and then slide the battery holder back
into the remote control.
Battery holder
Positive (+)
side up
Polarity
(+) symbol
Battery type
Locking tab
Precautions for battery use:
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due to
battery leakage.
Caution:
● Do not use rechargeable battery (nickel-cadmium
battery, etc.).
● Danger of explosion if battery is incorrectly replaced.
● Replace only with the same or equivalent type.
● Batteries (battery pack or battery installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like.
● Installing the battery incorrectly may cause the unit to
malfunction.
Notes concerning use:
● Replace the battery if the operating distance is
reduced or if the operation becomes erratic. Purchase
“CR 2025”, coin lithium battery.
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
General control
■
MICRO COMPONENT SYSTEM XL-DAB1
Volume auto set-in
● If you turn off and on the main unit with volume set to
16 or higher, the volume will start at 16.
● If you turn the unit off then on again with the volume
level set to less than 16, it will turn on again at the
level set.
■
Volume control
Press the VOLUME +/– button to increase or decrease the
volume.
■
Extra bass control (X-BASS)
When the X-BASS button is pressed, the unit will enter the
extra bass mode which emphasises the bass frequencies
and “X-BASS” indicator will light up. To cancel the extra
bass mode, press the X-BASS button again.
■
■
To turn the power on
Function
Main unit
Power on/
off
Remote
control
Operation
Press to turn the
power on or to
go to stand-by
mode.
Auto power off function
The main unit will enter the stand-by mode after 15 minutes
of inactivity during:
CD/USB: In the stop or pause mode.
DAB: No reception of broadcast signal.
AUDIO IN: No detection of input signal.
■
Muting
The volume is muted temporarily when pressing the
MUTE button on the remote control. Press again to restore
the volume.
E-3
XL-DAB1H_AUS (A5).indd 3
6/21/2010 9:12:52 AM
General control (continued)
■
■
Function (on main unit only)
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
CD
AUDIO IN
When the EQUALIZER button is pressed, the current
mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly until the
desired sound mode appears.
USB
DAB
Equalizer
TUNER
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or
the AC power lead becomes disconnected.
FLAT
No equalisation.
ROCK
For rock music.
CLASSIC
For classical music.
POPS
For pop music.
VOCAL
Vocals are enhanced.
JAZZ
For jazz.
Listening to a CD or MP3/WMA disc
■
MICRO COMPONENT SYSTEM XL-DAB1
Disc playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or
FUNCTION button on the main unit repeatedly to
select CD function.
3 Open the disc compartment.
4 Place the disc on the disc tray, label side up.
5 Close the disc compartment.
■
Various disc functions
Function
Main
unit
Pause
Track up/
down
Fast
forward/
reverse
Remote
control
Operation
Press in the
playback mode.
Press the
button to resume
playback from
the paused point.
Press in the
playback or stop
mode. If you
press the button
in the stop mode,
press the
button to start
the desired track.
Press and hold
down in the
playback mode.
Release the
button to resume
playback.
Total number
of tracks on
disc.
Total playing
time of the
disc.
Total number
of files (track)
on the disc.
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
6 Press the
button to start playback. After the last
track is played, the unit will stop automatically.
Notes for CD or MP3/WMA discs:
● When the end of the track is reached during fast
forward, the CD operation will be stopped. When
the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
● Rewritable multi-session discs with unfinished writing,
can still be played.
E-4
XL-DAB1H_AUS (A5).indd 4
6/21/2010 9:12:52 AM
Listening to a CD or MP3/WMA disc (continued)
■
■
Direct track search
Random play
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
The tracks on the disc can be played in random order
automatically.
Use the Direct Search buttons on the remote control
to select the desired track whilst playing the selected
disc.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RND” icon light up.
● The Direct Search buttons allow you to select up to
number 9.
● When selecting number 10 or higher, use the “10+”
button.
To cancel random play:
Press and hold the PLAY MODE button. “RND” icon will
disappear.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1
2
3
4
Selected track number
Notes:
● During random playback, repeat function is not
possible. Selecting the repeat function will cancel the
random playback.
● Playback will stop after all the tracks is played
randomly.
● If you press the
or
button during random play,
you can move to the track selected next by the random
operation.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the button on main unit or remote control.
■
■
You can choose up to 32 selections for playback in the
order you like.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
1 Whilst in the stop mode, press the MEMORY button
on the remote control to enter the programming save
mode.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
button.
appears. Press the
To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL”
button.
appears. Press the
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on pages
4 - 5 and then press the PLAY MODE button until “RPT
ALL” appears.
To cancel repeat play:
Press the PLAY MODE button again until “ ” or “
disappears.
Programmed play
Total tracks on CD
Total tracks on MP3/WMA disc
2 Press the
or
button on the remote control to
select the desired track.
”
Selected track number
3 Press the MEMORY button to save the track number.
E-5
XL-DAB1H_AUS (A5).indd 5
6/21/2010 9:12:53 AM
Listening to a CD or MP3/WMA disc (continued)
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks
■ Procedure to play back MP3/WMA disc
with folder mode on
can be programmed. If you make a mistake, press
the CLEAR button whilst the “MEMORY” indicator is
flashing. Each time the button is pressed, one track will
be cleared, beginning with last track programmed.
To play back CD-R/RW.
1 Press the CD button, and load an MP3/WMA disc.
5 Press the
button to start playback.
6 Press the CD button. The total number in memory
After disc is loaded, disc info will be displayed.
will appear.
Total number of tracks
2 Press the FOLDER button and press the FOLDER (
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is
lit, press the CLEAR button on the remote control. The
“MEMORY” indicator will disappear and all the programmed
contents will be cleared.
or ) button to select desired playback folder. (Folder
mode on)
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY”
indicator will be displayed. Follow steps 1 - 4 to add tracks.
The new tracks will be stored after the last track of the
previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode,
or
button.
press the
Folder number
Total tracks in chosen folder
3 Select desired file to be played back by pressing the
or
button.
4 Press the
(CD
) button. Playback will start.
● File name, Title, Artist and Album name are
displayed if they are recorded on the disc.
● Press the FOLDER ( or ) button, and the folder
can be selected even though it is in playback mode.
It will continue playback mode with the first track of
the selected folder.
● Display content can be changed by pressing the
DISPLAY button.
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible. Selecting the random function will cancel the
programme playback.
File name display
Title display
Counter display
Artist display
Album display
Note:
If the track of “Copyright protected WMA file” or “Not
supported playback file” is selected during playback, “NO
SUPPORT” is displayed on unit display and the track is
skipped.
E-6
XL-DAB1H_AUS (A5).indd 6
6/21/2010 9:12:53 AM
Listening to USB mass storage device/MP3 player
■ To play back USB/MP3 player with folder
mode on
MICRO COMPONENT SYSTEM XL-DAB1
1 Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the
USB memory is connected to the main unit, the track
information will be displayed.
2 Press the FOLDER button, then press FOLDER (
or ) button to select desired playback folder. To start
playback, go to step 4. To change the playback folder,
press the FOLDER ( or ) button to select another
folder.
3 Select desired file to be played back by pressing the
or
button.
4 Press the
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
■ To play back USB/MP3 player with folder
mode off
1 Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
(USB
) button. Playback will start.
● File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
● Display content can be changed by pressing the
DISPLAY button.
■ To remove USB memory device
1 Press the (USB ) button to stop playback.
button again and wait until “OK” is
2 Press the
displayed.
2 Select desired file to be played back by pressing the
or
button.
3 Press the
(USB
) button. Playback will start.
● File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
(USB
Press the
) button.
3 Disconnect the USB memory device from the USB
terminal.
Notes:
● Always remove the USB memory device after “OK”
appears on the display. Improper removal of the USB
memory device may cause irregularities to happen.
● Should this happen, turn off the unit and then turn it
on again.
● SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
● This USB memory’s format supports FAT 16 or FAT
32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
E-7
XL-DAB1H_AUS (A5).indd 7
6/21/2010 9:12:53 AM
Listening to USB mass storage device/
MP3 player (continued)
Listening to the radio
MICRO COMPONENT SYSTEM XL-DAB1
Notes:
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
● The USB port is only intended for direct connection to
a USB memory device without any cable.
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● Playlists are not supported on this unit.
● This unit can display File Name up to 16 characters.
● Folders with non playable files are also counted.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
■ Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER button on the remote control or
FUNCTION button on the main unit repeatedly to
select tuner function.
3 Press the TUNING (
) button to tune in to the
● Manual tuning:
Press the TUNING ( or ) button repeatedly to
tune in to the desired station.
● Auto tuning:
When the TUNING ( or ) button is pressed
for more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
The following functions are the same as CD
operation:
Page
Direct track search ........................................................5
Repeat play ....................................................................5
Random play ..................................................................5
Programmed play .................................................... 5 - 6
Note:
If USB memory device is not connected, “NO MEDIA” will
be shown on the display.
or
desired station.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
To receive an FM stereo transmission:
● Press the TUNER button to select stereo mode and
“ST” indicator will be displayed. “
” will appear when
an FM broadcast is in stereo.
● If the FM reception is weak, press the PLAY MODE
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes
clearer.
E-8
XL-DAB1H_AUS (A5).indd 8
6/21/2010 9:12:54 AM
Listening to the DAB+
Listening to the radio (continued)
■ To preset a station
■ About DAB+ (Digital Audio Broadcasting)
Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more
stations (services). Each station contains a primary service
and there may be one or more secondary services.
This allows several programmes or services to be
transmitted on a single frequency.
You can store FM stations in memory and recall them at
the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in “Tuning”.
2 Press the MEMORY button.
DAB+ SIGNAL
3 Within 5 seconds, press the
or
button to select
the preset channel number. Store the stations in
memory, in order, starting with preset channel 1.
MULTIPLEX
(ENSEMBLE)
4 Press the MEMORY button to store that station
in memory. If the “MEMORY” and preset number
indicators disappear before the station is memorised,
repeat the operation from step 2.
SERVICES
5 Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
SERVICES
COMPONENTS
(STATIONS)
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
■ Auto tune
MICRO COMPONENT SYSTEM XL-DAB1
■ To recall a preset station
Press the PRESET (
or
) button for less than 0.5
seconds to select the desired station.
■ To scan the preset station
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1 Press the PRESET (
or
) button for more than
0.5 seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for
5 seconds each.
2 Press the PRESET (
or
desired station is located.
When turned on for the first time, the unit scans radio
stations automatically to create a station list. You can make
the AUTOTUNE again when you move the unit to other
areas or add multiplex channels to the station list.
) button again when the
1 Press the TUNER/DAB button until “DAB” appears on
the display.
■ To erase entire preset memory
1 Press and hold the CLEAR button until “TUN CLR”
2 Press SCAN button on the remote control for more
appears then press MEMORY button.
than 3 seconds. AUTOTUNE scanning begins.
The scanning progress is
indicate by advancing asterisks.
The number of received station
E-9
XL-DAB1H_AUS (A5).indd 9
6/21/2010 9:12:54 AM
Changing the information display
Listening to the DAB+ (continued)
After the scan:
The stations will be stored in alphanumeric order and the
first station on the list will be selected and you will hear it
through the speakers.
● To listen to other stations, see “Selecting a station in
the station list” on page 10.
You can switch DAB+ display information.
Press the DISP button.
Each time the button is pressed, the information display
changes in the following order.
When “NO SERV” appears, the DISP button does not
allow you to change the display.
Notes:
● All previous station list will be cleared.
● If no station is found, “NO STN” appears.
● Up to 99 appears for total received stations.
[Station Name]
■ Selecting a station in the station list
Once a DAB+ station is received, you can select stations
in the station list.
[Signal quality]
[Scrolling text]
[Mode]
[Programme type]
[Channel/Frequency]
[Multiplex name]
1 Press the TUNER/DAB button until “DAB” appears on
the display.
2 Whilst receiving a DAB+ station, press the TUNING
(
or
) to select the desired station.
Display current station
The name of the station
being selected
[Station Name]
Station name is displayed. (set by default)
3 Within 10 seconds, press the ENTER button on the
remote control to tune into the desired station.
[Scrolling text]
Information scrolls across the display when sent from the
station
[Programme type]
A description of the type of content being broadcast by
the station.
■ Manual tune
You can manually store stations which AUTOTUNE cannot
find. If reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform
AUTOTUNE first.
1 Press the TUNER/DAB button until “DAB” appears on
[Multiplex name]
The name of the multiplex (ensemble) which provides the
current service.
[Channel/Frequency]
The DAB+ channel and frequency for the station.
(Frequency is displayed to two decimal places)
2 Press the SCAN button once.
[Mode]
The data transfer speed and channel type (stereo or
mono) appear.
3 Within 10 seconds, press the
[Signal quality]
The signal quality is displayed as a number (0 - 100).
the display.
TUNING/FOLDER (
or
select the DAB+ frequency.
[85-100: Good, 70-84: Fair, 0-69: Poor]
) to
4 Within 10 seconds, press the ENTER
button.
● Reception sensitivity appears. The percentage
number indicate the current level.
● If the level is too low, move the aerial or unit to
improve reception.
5 Press the ENTER button to store the station and exit
manual tune.
E-10
XL-DAB1H_AUS (A5).indd 10
6/21/2010 9:12:55 AM
Setting the clock (Remote control
only)
Timer and sleep operation (Remote
control only)
Timer playback:
The unit turns on and plays the desired source (CD, USB,
TUNER, DAB or AUDIO IN) at a preset time.
■ Timer playback
Before setting timer:
1 Check that the clock is set to the correct time (refer
to the column on the left). If it is not set, you cannot
use the timer function.
In this example, the clock is set for the 24-hour (00:00)
display.
1 Press the ON/STAND-BY button to turn to stand-by
mode.
2 Press and hold the CLOCK/TIMER button until “00:00”
appear.
2 For timer playback, load the disc to be played back.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button for about 2 seconds.
or
button to select
3 Within 10 seconds, press the
“ONCE” or “DAILY” and then press the MEMORY
button.
3 Within 10 seconds, press the
or
button to adjust
the hour and then press the MEMORY button. Press
or
button once to advance the time by 1
the
hour. Hold it down to advance continuously.
4 Press the
or
button to adjust the hours for timer
on and then press the MEMORY button.
4 Press the
or
button to adjust the minutes and
then press the MEMORY button. Press the
or
button once to advance the time by 1 minute. Hold it
down to advance continuously.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
[When the power is on]
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
5 Press the
or
button to adjust the minutes for
timer on and then press the MEMORY button.
6 Press the
or
button to adjust the timer off (as in
step 4 and 5) and then press the MEMORY button.
7 To select the timer playback source (CD, TUNER, USB
Note:
The “00:00” will appear when the AC power supply is
restored after a power failure or unplugging the unit. If
incorrect, readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1.
or AUDIO IN), press the
or
button. Press the
MEMORY button.
When you select TUNER, select a station by pressing
the
or
button, and then press the MEMORY
button. If a station has not been programmed, “NO
P-SET” will be displayed and timer setting will be
canceled.
E-11
XL-DAB1H_AUS (A5).indd 11
6/21/2010 9:12:55 AM
Timer and sleep operation (Remote control only) (continued)
8 Adjust the volume using the VOLUME + or VOLUME
– and then press the MEMORY button. (Do not turn the
volume up too high).
Sleep timer
setting
Timer playback
setting
End time
5 - 120 minutes
9 Press the ON/STAND-BY button to enter the power
stand-by mode. The TIMER red indicator lights up and
the unit is ready for timer playback.
Sleep operation will
automatically stop
Desired time
Timer playback
start time
10 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The “ ” indicator will blink during timer
playback.
Checking the timer setting:
Press the CLOCK/TIMER button repeatedly to view as
follows:
Enhancing your system
The connection cord is not included. Purchase a
commercially available cord as shown below.
MICRO COMPONENT SYSTEM XL-DAB1
Cancelling the timer setting:
Press the CLOCK/TIMER button for about 2 seconds.
or
to select “OFF” and
Within 5 seconds, press
press MEMORY button.
Portable audio
player, etc.
Note:
After selecting the volume level and press the MEMORY
button to confirm, it will change to last function.
Audio cable
(not supplied)
■ Listening to the playback sounds of
portable audio player, etc.
■ Sleep operation
The radio, compact disc and USB can all be turned off
automatically.
1 Use a connection lead to connect the portable audio
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the SLEEP button repeatedly
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO IN button on the remote control or
player etc. to the AUDIO IN socket.
FUNCTION button repeatedly on main unit to select
AUDIO IN function.
to select the time.
SLP 120
90
60
30
15
10
5
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase
the volume of the connected device.
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
To confirm the remaining sleep time:
Whilst “SLEEP” is indicated, press the SLEEP button. The
remaining time is displayed for about 10 seconds.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
Whilst “SLEEP” is indicated, press the SLEEP button
repeatedly until SLEEP indicator disappears.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1 Set the sleep time (refer to the column on the left,
steps 1 - 5).
Note:
To prevent noise interference, place the unit away from the
television.
■ Headphones
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphones,
reduce the volume.
● Be sure your headphones have a 3.5 mm (1/8”)
diameter plug and impedance between 16 and 50
ohms. The recommended impedance is 32 ohms.
● Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 8, pages 10 - 11).
E-12
XL-DAB1H_AUS (A5).indd 12
6/21/2010 9:12:56 AM
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician. If something is wrong
with this product, check the following before calling your
authorized SHARP dealer or service center.
■ General
Symptom
Possible cause
● The clock is not ● Did a power failure occur?
set to the correct
Reset the clock. (Refer page
time.
11)
● When a button is ● Set the unit to the power
pressed, the unit
stand-by mode and then turn
does not respond.
it back on.
● If the unit still malfunctions,
reset it. (Refer page 14)
● No
sound
heard.
is ● Is the volume level set to
“MIN”?
● Are
the
headphones
connected?
● Are the speaker wires
disconnected?
■ CD player
Symptom
Possible cause
● Playback
does ● Is the disc loaded upside
not start.
down?
● Playback stops ● Does the disc satisfy the
in the middle or
standards?
is not performed ● Is the disc distorted or
properly.
scratched?
● Playback sounds ● Is the unit located near
are skipped, or
excessive vibrations?
stopped in the ● Is the disc very dirty?
middle of a track. ● Has condensation formed
inside the unit?
■ Remote control
Symptom
Symptom
Possible cause
● Device cannot be ● Is there any MP3/WMA file
detected.
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
● Playback does not ● Is it a copyright protected
start.
WMA file?
● Is it a false MP3 file?
● Wrong time display. ● Is Variable Bitrate file
● Wrong file name
being played back?
display.
● Is the File Name written
in Chinese or Japanese
characters?
■ Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter
on the remote control. Condensation can cause the unit
to malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■ Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD
in the disc tray. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can damage
the unit.
■ If problem occurs
Possible cause
● The remote control ● Is the AC power lead of the
does not operate.
unit plugged in?
● Is the battery polarity
correct?
● Is the battery dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong light?
■ Tuner
Symptom
■ USB
Possible cause
● The radio makes ● Is the unit placed near the TV
unusual
noises
or computer?
continuously.
● Is the FM aerial placed
properly?
Move the aerial away from
the AC power lead if it is
located nearby.
When this product is subjected to strong external
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power
on again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
E-13
XL-DAB1H_AUS (A5).indd 13
6/21/2010 9:12:57 AM
Troubleshooting chart (continued)
Specifications
■ Factory reset, clearing all memory
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
2 Press the STOP button followed by ON/STAND-BY
button on main unit and hold it simultaneously for more
than 5 seconds until “CLR ALL” appears.
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, DAB+ preset
and CD program.
■ Care of compact discs
■ General
Power source
AC 220 - 240 V ~ 50/60 Hz
Power consumption
Power on: 21 W
Power stand-by: 0.4 W (*)
Dimensions
Width: 190 mm (7 - 1/2”)
Height: 115.7 mm (4 - 9/16”)
Depth: 230.4 mm (9 - 1/16”)
Weight
2.4 kg (5.31 lbs.)
(*) This power consumption value is obtained when the
main unit is in stand-by mode.
■ Amplifier
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on
the disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt,
or water on the CDs can cause noise or mistracking.
If a CD is dirty or does not play properly, clean it with
a soft, dry cloth, wiping straight out from the centre,
along the radius.
NO
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
YES
Correct
Output power
MPO: 14 W (7 W + 7 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 8 W (4 W + 4 W) (1% T.H.D.)
Output
terminals
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
■ CD player
Type
Single disc multi-play compact
disc player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
■ Speaker
Maintenance
■ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
Type
1-way type speaker system
8 cm (3”) Full range
Maximum input
power
10 W
Rated input power
5W
Impedance
4 ohms
Dimensions
Width: 111 mm (4 - 3/8”)
Height: 194 mm (7 - 5/8”)
Depth: 180 mm (7 - 1/16”)
Weight
1.3 kg (2.8 lbs.)/each
■ Tuner
Frequency range
FM: 87.5 - 108 MHz
E-14
XL-DAB1H_AUS (A5).indd 14
6/21/2010 9:12:57 AM
Specifications (continued)
■ Display information table
■ USB
USB host
interface
● Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage Class.
● Support Bulk only and CBI
protocol.
Support file
● MPEG 1 Layer 3
● WMA (Non DRM)
Bitrate support
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
A
>, )
Other
● Maximum total number of MP3/
WMA files is 999.
● Maximum total number of
folders is 99 INCLUSIVE of root
directory.
● The
ID3TAG
information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1 and
version 2.
B
,
D
.
G
/
O
\
Q
?
R
{, [
S
}, ]
0 (zero)
|, !
1
+
2
=
5
-
File system
support
Notes on the display information:
● Characters are displayed in Uppercase letters (A to Z),
numbers and symbols.
● Display examples are as in table shown below.
DISPLAY
● Support USB devices with
Microsoft Windows/DOS/FAT 16/
FAT 32.
● 2 kbyte block length for sector.
■ DAB Frequency table (BAND III)
Frequency
Label
Frequency
Label
174.928 MHz
5A
208.064 MHz
9D
176.640 MHz
5B
209.936 MHz
10A
178.352 MHz
5C
211.648 MHz
10B
180.064 MHz
5D
213.360 MHz
10C
181.936 MHz
6A
215.072 MHz
10D
183.648 MHz
6B
216.928 MHz
11A
185.360 MHz
6C
218.640 MHz
11B
187.072 MHz
6D
220.352 MHz
11C
188.928 MHz
7A
222.064 MHz
11D
190.640 MHz
7B
223.936 MHz
12A
192.352 MHz
7C
225.648 MHz
12B
194.064 MHz
7D
227.360 MHz
12C
195.936 MHz
8A
229.072 MHz
12D
197.648 MHz
8B
230.784 MHz
13A
199.360 MHz
8C
232.496 MHz
13B
201.072 MHz
8D
234.208 MHz
13C
202.928 MHz
9A
235.776 MHz
13D
204.640 MHz
9B
237.488 MHz
13E
206.352 MHz
9C
239.200 MHz
13F
INDICATES
DISPLAY
INDICATES
6
8
&
’
%
”
^, ~
:
$
;
@
<, (
`
✽ Frequencies are displayed to two decimal places on
this unit.
E-15
XL-DAB1H_AUS (A5).indd 15
6/21/2010 9:12:57 AM
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.au
OR CALL SHARP CUSTOMER CARE
1300 135 022
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
FOR LOCATION ENQUIRIES WITHIN
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.nz
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
E-16
XL-DAB1H_AUS (A5).indd 16
6/21/2010 9:12:58 AM
E-17
XL-DAB1H_AUS (A5).indd 17
6/21/2010 9:12:58 AM