QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
IN THE US
1-800-SAMSUNG
(7267864)
www.samsung.com/us
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park,
NJ 07660-0511
Code No. AH68-02047C (0.0)
Ht-Z410_XAA_0124.indd 2
2008-01-24 �� 6:33:20
HT-Z410
Digital Home
Theater System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/global/register
HT-Z410_XAA_0124.indd 3
2008-01-24 �� 6:33:21
features
multi-Disc Playback & fm tuner
The HT-Z410 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, CD,
MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD±R/RW, with a sophisticated FM tuner, all in a single player.
DVD-audio compatible
Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to
deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail.
USB Host support
You can enjoy media files such as pictures, movies and music saved on an MP3 player, digital camera or USB
memory stick by connecting the storage device to the USB port of the Home Theater.
Dolby Pro Logic ii
Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro
Logic.
DtS (Digital theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency 5.1 channel
sound.
tV Screen Saver function
If the main unit remains in Stop mode for 3 minutes, the Samsung logo appears on the TV screen.
The HT-Z410 will automatically switch to the Power Saving mode after 20 minutes in the Screen Saver mode.
Power Saving function
The HT-Z410 will automatically shut off after 20 minutes in Stop mode.
Customized tV Screen Display
The HT-Z410 allows you to select your favorite image during JPEG or DVD playback and set it as your background
wallpaper.
anynet+ (HDmi-CEC) function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote control, by connecting the
Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TV's that support
Anynet+.)
iPod support
You can enjoy music files by your connecting iPod to the home theater with the supplied iPod dock.
aV SynC function
Video may lag behind the audio if the unit is connected to a digital TV.
To compensate for this, you can adjust the audio delay time to sync up with the video.
WHat’S inCLUDED
Check for the supplied accessories below.
Video Cable
(AH39-40001V)
FM Antenna
( AH42-00017A )
iPod Dock Package
( AH97-02650A )
User's Manual
( AH68-02047C )
Remote Control
( AH59-01907E )
/ Batteries (AAA size)
( 4301-000116 )
ASC microphone
( AH30-00099A )
2
Ht-Z410_XAA_0124.indd 2
2008-01-24 �� 6:33:23
EnG
safety information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and Arrowhead within
Triangle Is a warning sign alerting you of
dangerous voltage inside the product
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QULAIFIED SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
The explanation point within the triangle is a
warning sign alerting you of important
instructions accompanying the product.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED,
AVOID EXPOSURE TO BEAM.
WARNING
~ To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
~ To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
~ If this power supply is used at 240V ac, a suitable plug adapter should be used.
CAUTION
~ Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
~ The Mains plug is used as a disconnect device and shall stay readily operable at any time.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent
electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
~ Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help.
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user's authority to operate it.
HT-Z410_XAA_0124.indd 3
2008-01-24 �� 6:33:23
safety information
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep
these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these Instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11) Only use attachment/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Ht-Z410_XAA_0124.indd 4
2008-01-24 �� 6:33:23
EnG
PrECaUtiOnS
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which
may become hot. Before moving the player, ensure the disc tray is empty. this player is designed for continuous use. Switching off
the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the
power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect the AC main plug from the
wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture (i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric fields
(i.e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use. Use of
this product is for personal use only.
Condensation may occur if your player or disc has been stored in
cold temperatures. If transporting the player during the winter,
wait approximately 2 hours until the unit has reached room temperature
before using.
the batteries used with this product contain chemicals that are harmful
to the environment.
Do not dispose of batteries in the general household trash.
this product is covered by one or more of the following U.S. patents:
5,060,220
6,389,570
6,631,110
6,744,713
6,810,201
5,457,669
6,408,408
6,658,588
6,744,972
6,862,256
5,561,649
6,466,532
6,674,697
6,765,853
6,868,054
5,705,762
6,473,736
6,674,957
6,765,853
6,894,963
5,987,417
6,477,501
6,687,455
6,771,890
6,937,552
6,043,912
6,480,829
6,697,307
6,771,891
6,222,983
6,556,520
6,707,985
6,775,465
6,272,096
6,556,521
6,721,243
6,778,755
6,377,524
6,556,522
6,721,493
6,788,629
6,377,531
6,578,163
6,728,474
6,788,630
6,385,587
6,594,208
6,741,535
6,795,637
this product is covered by the following U.S. patents:
US4,930,158 US4,930,160
5
Ht-Z410_XAA_0124.indd 5
2008-01-24 �� 6:33:26
contents
features
2
What’s included
safety information
3
4
5
Safety Warnings
Important Safety Instructions
Precautions
8
9
9
9
10
Before Reading the User’s Manual
Playable Discs
Do not use the following types of disc!
Copy Protection
Disc Type and Characteristics
2
3
8
getting started
description
11
14
18
remote control
connections
before using your home
theater
31
32
playback
11 Front Panel
12 Display
13 Rear Panel
14 Tour of the Remote Control
16 Setting the Remote Control
18 Connecting the Speakers
21 Connecting the Optional Wireless Receiving
Amplifier
23 Connecting the Video Out to your TV
25 HDMI Function
26 Connecting an iPod
28 Connecting Audio from External
Components
30 Connecting the FM Antenna
31 Before using your home theater
32
33
34
35
37
46
47
Disc Playback
MP3/WMA-CD playback
JPEG File Playback
DivX Playback
Using The Playback Function
Using the iPod
Playing Media Files Using The USB Host
Feature
HT-Z410_XAA_0124.indd 6
2008-01-24 �� 6:33:26
EnG
system setup
49
49
50
51
51
52
52
53
53
54
55
55
56
57
57
58
58
59
59
60
radio
62
convenient function
63
Setting the Language
Setting TV Screen Type
Setting Parental Controls (Rating Level)
Setting the Password
Setting The Wallpaper
To Select one of the 3 Wallpaper Settings
you've made
DVD Playback Mode
Setting the Speaker Mode
Setting the Delay Time
Setting the Test Tone
Setting the Audio
Setting the DRC (Dynamic Range
Compression)
Setting the AV SYNC
Setting the HDMI Audio
Sound field (DSP)/EQ Function
Dolby Pro Logic II Mode
Dolby Pro Logic II Effect
P.BASS
ASC (Auto Sound Calibration) Setup
62 Listening To Radio
62 Presetting Stations
63 Sleep Timer Function
63 Adjusting Display Brightness
63 Mute Function
troubleshooting
64 Troubleshooting
USB host feature supported
products
66 Digital Camera
66 USB Flash Disc
66 MP3 Player
64
66
67
appendix
67 Cautions on Handling and Storing Discs
68 Specifications
69 Warranty
Ht-Z410_XAA_0124.indd 7
2008-01-24 �� 6:33:26
getting started
Before Reading the User’s Manual
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
Term
Definition
d
DVD
This involves a function available with DVD or DVD-R/DVD-RW discs that
have been recorded and finalized in Video Mode.
CD
This involves a function available with a data CD (CD-R or CD-RW).
MP3
This involves a function available with CD-R/-RW discs.
JPEG
This involves a function available with CD-R/-RW discs.
DivX
This involves a function available with MPEG4 discs.
(DVD±R/RW, CD-R or CD-RW)
Caution
This involves a case where a function does not operate or settings may be
cancelled.
Note
This involves tips or instructions on the page that help each function
operate.
B
A
G
D
M
M`
In this manual, the instructions marked with "DVD ( DVD )" are applicable to DVDVIDEO, DVD-AUDIO and DVD-R/-RW discs that have been recorded in Video Mode
and then finalized. Where a particular DVD type is mentioned, it is indicated
separately.
` If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be
playable.
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before using this product. (See pages 4~5)
2) If a problem occurs, check the Troubleshooting. (See pages 64~65)
Copyright
©2008 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the
prior written permission of Samsung Electronics Co.,Ltd.
Ht-Z410_XAA_0124.indd 8
2008-01-24 �� 6:33:27
1
~ 6
EnG
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
5 inches
DVD-AUDIO
AUDIO + VIDEO
DVD-VIDEO
3 1/2 inches
AUDIO-CD
COMPACT
AUDIO
DIGItAL AUDIO
DivX
AUDIO + VIDEO
● getting started
Playable Discs
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5 inches
74 min.
3 1/2 inches
20 min.
5 inches
—
3 1/2 inches
—
Do not use the following types of disc!
~L
D, CD-G, CD-I, CD-ROM, DVD-ROM and DVD-RAM discs cannot be played on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
~ DVD discs purchased abroad may not play on this player.
If such discs are played, a <CAN'T PLAY THIS DISC PLEASE, CHECK REGION CODE> message appears on the
TV screen.
Copy Protection
~M
any DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
~ This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing usses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Ht-Z410_XAA_0124.indd 9
2008-01-24 �� 6:33:27
getting started
Disc Type and Characteristics
This product does not support Secure (DRM) Media files.
❖ CD-R Discs
~ Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the
condition of the disc.
~ Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minutes as they may not be played back.
~ Some CD-RW (Rewritable) media, may not be playable.
~ Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you
may not be able to fully play the disc.
❖ CD-R MP3 Discs
~ Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
~ MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters
(. / = +).
~ Use discs recorded with a compression/decompression data rate greater than 128Kbps.
~ Only files with the "mp3" and extensions can be played.
~ Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession
disc, the disc can be played only up to the blank segment.
~ If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
~ For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
~ A maximum of 500 tracks can be played per CD.
~ A maximum of 300 folders can be played per CD.
❖ CD-R JPEG Discs
~ Only files with the "jpg" extensions can be played.
~ If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
~ Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
~ JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters
(. / = +).
~ Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank segment.
~ A maximum of 9,999 images can be stored on a single CD.
~ When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
~ Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
❖ DVD±R/RW, CD-R/RW DivX Discs
~ Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the
user might not play.
~ Software updates for incompatible formats are not supported.
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
~ Sections with a high frame rate might not be played while playing a DivX file.
~ For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.
net".
10
Ht-Z410_XAA_0124.indd 10
2008-01-24 �� 6:33:28
EnG
description
Front Panel
● description
10
DISC
CHANGE
FUNCTION
VOLUME
DISC
CHANGE
FUNCTION
PHONES
VOLUME
AUX IN 1
ASC IN
11
12
13 14
DISC TRAY
TUNING UP & SKIP ( ) BUTTON
11
POWER( ) BUTTON
FUNCTION BUTTON
OPEN/CLOSE BUTTON
12
PHONES JACK
TUNING DOWN & SKIP ( )
BUTTON
VOLUME CONTROL
13
AUX IN 1/ASC (Auto Sound
Calibration) IN JACK
STOP (T) BUTTON
DIRECT PLAY 1~5 BUTTONS
14
USB PORT
PLAY/PAUSE (
) BUTTON
10
DISC CHANGE BUTTON
11
Ht-Z410_XAA_0124.indd 11
2008-01-24 �� 6:33:28
description
DISPLAY
10 11
13 14 15 16
12
FUNCTION DISPLAY
USB INDICATOR
13
RADIO FREQUENCY INDICATOR
REPEAT INDICATOR
DTS DISC INDICATOR
14
DOLBY DIGITAL INDICATOR
HDMI INDICATOR
REPEAT INDICATOR
15
PRO LOGIC INDICATOR
16
LPCM INDICATOR
DISC INDICATOR
10
DSP INDICATOR
DVD INDICATOR
11
ASC (Auto Sound Calibration)
INDICATOR
CD INDICATOR
12
SYSTEM STATUS DISPLAY
12
Ht-Z410_XAA_0124.indd 12
2008-01-24 �� 6:33:29
EnG
rEar PanEL
1
2 5
● DESCriPtiOn
10
10
TX CARD CONNECTION (WIRELESS)
The TX card enables communication between the main unit and the
optional wireless receiver amplifier.
iPod JACK
Connect the iPod dock connector here.
AUX IN 2 JACKS
Connect to the 2CH analog output of an external device (such as a VCR)
VIDEO OUTPUT JACK
Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
COMPONENT VIDEO OUTPUT JACKS
Connect a TV with Component video inputs to these jacks.
External Digital Optical Input Jack
Use this to connect external equipment capable of digital output.
FM 75Ω COAXIAL JACK
Connect the FM antenna.
HDMI OUT JACK
Use the HDMI cable, connect this HDMI output terminal to the HDMI input
terminal on your TV for the best quality picture.
COOLING FAN
The fan always revolves when the power is on. Ensure a minimum of
4 inches of clear space on all sides of the fan when installing the
product.
SPEAKER OUTPUT CONNECTORS
Connect the front, center, rear speakers and subwoofer.
1
HT-Z410_XAA_0124.indd 13
2008-01-24 �� 6:33:34
remote control
Tour of the Remote Control
1
2
DVD RECEIVER
DVD
PORT
3
19
20
21
22
4
5
6
7
REMAIN
STEP
PAUSE
23
24
25
8
26
9
27
28
29
30
10
AUDIO
SUB
TITLE
31
11
32
12
13
14
15
16
17
18
33
34
P.BASS
35
36
37
14
Ht-Z410_XAA_0124.indd 14
2008-01-24 �� 6:33:35
DVD RECEIVER button
20
PORt button
2
TV button
21
DISC SKIP, TV/VIDEO button
3
POWER button
22
4
Number (0~9) buttons
23
CANCEL button
5
REMAIN button
24
PAUSE button
6
STEP button
7
Tuning Preset/CD Skip buttons
8
VOLUME button
26
TUNING/CH button
9
MENU button
27
MUTE button
10
AUDIO button
28
RETURN button
29
Cursor/ENTER button
30
SUBTITLE button
PL II MODE button
OPEN/CLOSE button
PLAY button
STOP button
SEARCH buttons
12
TUNER MEMORY, SD(Standard
Definition)/HD(High Definition) button
13
ZOOM button
31
EXIT button
14
P.BASS button
32
INFO button
15
SLEEP button
33
SOUND EDIT button
16
ASC button
34
REPEAT button
17
SLOW, MO/ST button
35
DSP/EQ button
PL II EFFECT button
36
LOGO button
DVD button
37
DIMMER button
18
DVD
DVD
19
DVD
● remote control
11
25
EnG
1
TUNER button
AUX button
Insert Remote Batteries
1. Remove the battery
cover in the direction
of the arrow.
M
2. Insert two 1.5V AAA batteries, paying
attention to the correct polarities
(+ and –).
3. Replace the battery
cover.
Follow these precautions to avoid leaking or cracking cells:
`
`
`
`
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
Use the correct type of batteries. Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose the batteries to heat or a flame.
15
Ht-Z410_XAA_0124.indd 15
2008-01-24 �� 6:33:37
remote control
SEttinG tHE rEmOtE COntrOL
You can control certain functions of your TV with this remote control.
When operating a tV with the remote control
1. Press the tV button to set the remote to TV mode.
2. Press the POWEr button to turn on the TV.
3. While holding down the POWEr button, enter the code
corresponding to your brand of TV.
~ If there is more than one code listed for your TV in the
table, enter one at a time to determine which code works.
Example : for a Samsung tV
While holding down the POWEr button, use the number
buttons to enter 00, 15, 16, 17 or 40.
4. If the TV turns off, the setting is complete.
~ You can use the TV POWER, VOLUME, CHANNEL, and
Numeric buttons (0~9).
M
` The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
` If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Operation range of the remote Control
The remote control can be used up to approximately
23 feet (7 meters) in a straight line.
It can also be operated at a horizontal angle of up to 30° from the
remote control sensor.
DISC
CHANGE
FUNCTION
VOLUME
1
HT-Z410_XAA_0124.indd 16
2008-01-24 �� 6:33:38
No.
No.
Brand
1
Admiral (M.Wards)
56, 57, 58
44
MTC
18
2
A Mark
01, 15
45
NEC
18, 19, 20, 40, 59, 60
3
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11,
46
Nikei
03
12, 13, 14
47
Onking
03
Code
Brand
EnG
TV Brand Code List
Code
AOC
01, 18, 40, 48
48
Onwa
03
5
Bell & Howell (M.Wards)
57, 58, 81
49
Panasonic
06, 07, 08, 09, 54, 66, 67, 73, 74
6
Brocsonic
59, 60
50
Penney
18
7
Candle
18
51
Philco
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
8
Cetronic
03
52
Philips
15, 17, 18, 40, 48, 54, 62, 72
9
Citizen
03, 18, 25
53
Pioneer
63, 66, 80, 91
10
Cinema
97
54
Portland
15, 18, 59
11
Classic
03
55
Proton
40
12
Concerto
18
56
Quasar
06, 66, 67
13
Contec
46
57
Radio Shack
17, 48, 56, 60, 61, 75
14
Coronado
15
58
RCA/Proscan
18, 59, 67, 76, 77, 78, 92, 93, 94
15
Craig
03, 05, 61, 82, 83, 84
59
Realistic
03, 19
16
Croslex
62
60
Sampo
40
17
Crown
03
61
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49,
18
Curtis Mates
59, 61, 63
19
CXC
03
62
Sanyo
19, 61, 65
20
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
63
Scott
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
64
Sears
15, 18, 19
21
Daytron
40
65
Sharp
15, 57, 64
22
Dynasty
03
66
Signature 2000 (M.Wards)
57, 58
23
Emerson
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
67
Sony
50, 51, 52, 53, 55
24
Fisher
19, 65
68
Soundesign
03, 40
25
Funai
03
69
Spectricon
01
26
Futuretech
03
70
SSS
18
27
General Electric (GE)
06, 40, 56, 59, 66, 67, 68
71
Sylvania
18, 40, 48, 54, 59, 60, 62
28
Hall Mark
40
72
Symphonic
61, 95, 96
29
Hitachi
15, 18, 50, 59, 69
73
Tatung
06
30
Inkel
45
74
Techwood
18
31
JC Penny
56, 59, 67, 86
75
Teknika
03, 15, 18, 25
32
JVC
70
76
TMK
18, 40
33
KTV
59, 61, 87, 88
77
Toshiba
19, 57, 63, 71
● remote control
4
59, 60, 98
34
KEC
03, 15, 40
78
Vidtech
18
35
KMC
15
79
Videch
59, 60, 69
36
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
80
Wards
15, 17, 18, 40, 48, 54, 60, 64
37
38
Luxman
18
81
Yamaha
18
LXI (Sears)
19, 54, 56, 59, 60, 62, 63, 65, 71
82
York
40
39
Magnavox
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
83
Yupiteru
03
40
Marantz
40, 54
84
Zenith
58, 79
41
Matsui
54
85
Zonda
01
42
MGA
18, 40
86
Dongyang
03, 54
43
Mitsubishi/MGA
18, 40, 59, 60, 75
17
Ht-Z410_XAA_0124.indd 17
2008-01-24 �� 6:33:39
connections
This section involves various methods of connecting the Digital Home Theater to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the DVD Player
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Front Speakersei
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in front
of the center speakers.
Center Speaker
f
It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.
hj
Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each
Rear Speakers
other. Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.
Unlike the front and center speakers, the rear speakers are used to handle mainly sound effects and sound will not
come from them all the time.
*
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Speaker Components
(L)
(L)
(R)
FRONT
L (AH81-03848E)
R (AH81-03848M)
(R)
REAR
L (AH81-03848G)
R (AH81-03848N)
CENTER
(AH81-03848F)
SUBWOOFER
(AH81-03848D)
CENTER
(AH81-03469A)
CENTER
(AH81-03853A)
FRONT/REAR
(AH81-03465A)
FRONT/REAR
(AH81-03852A)
CRADLE STAND/
WALL MOUNT
HOLE COVER
18
Ht-Z410_XAA_0124.indd 18
2008-01-24 �� 6:33:41
<front/rear>
EnG
installing the Cradle Stand
<Center>
1
1
2. Turn the stand clockwise to lock it.
(Turning it counter-clockwise will loosen
from the hole.)
2
2
3. This is the completion of the stand
installation.
● COnnECtiOnS
1. Insert the stand so that it fits into the hole
as described in the figure.
installing the Wall mount
<front/rear>
<Center>
1. Insert the wall mount so that it fi ts into the
rear hole of the speaker as in the figure.
1
1
2. Turn the wall mount counter clockwise to
fix it. (This is the reverse direction to the
cradle stand.)
2
2
3. Put the hole cover on the hole of the
speaker.
1
Ht-Z410_XAA_0124.indd 19
2008-01-24 �� 6:33:45
connections
Installing the Wall Mount (Con't)
4. Use a coin turn the hole cover clock wise
to fix it. (Turning it count-clock wise will
loosen from the hole.)
5. Use the wall mount hole (bracket) to install
the speaker on the wall.
M
<Front/Rear>
<Center>
4
4
5
5
To avoid accident fall and consequent damage to the customer and speaker, make sure
the speaker is hung safely.
Connecting the Front, Rear, Center and Subwoofer Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
3. Connect the connecting plugs to the back of the Home Theater.
• Make sure the colors of the speaker terminals match the colors of
the connecting plugs.
Black
Red
Center Speaker
Rear Speaker (R)
Rear Speaker (L)
Front Speaker (R)
20
HT-Z410_XAA_0125.indd 20
Front Speaker (L)
Subwoofer
2008-01-25 �� 11:17:20
EnG
` Do not let children play with or near the speakers. They could get hurt if a speaker falls.
` When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is
correct.
` Keep the subwoofer speaker out of reach of children so as to prevent children from
inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.
` Do not hang the subwoofer on a wall through the duct (hole).
If you place a speaker near your TV set, screen color may be distorted because of the
magnetic field generated by the speaker. If this occurs, place the speaker away from your
TV set.
Connecting the Optional Wireless Receiving Amplifier
● connections
M`
Wireless Receiving Module (SWA-4000)
Center Speaker
Front Speaker (R)
Rear Speaker (L)
Front Speaker (L)
Rear Speaker (R)
Subwoofer
WIRELESS RECEIVER MODULE
1. Connect the front, center and Subwoofer speakers to the
DVD Player, refering to page 20.
2. With the DVD Player turned off, insert the TX card into the
TX Card Connection(WIRELESS) on the back of the main unit.
~ Hold the TX card so that the slanted side faces to the left
and insert the card into the port.
~ The TX card enables communication between the main
unit and the wireless receiver.
. Connect the left and right rear speakers to the wireless
receiving module.
Slanted side face left
TX card
21
Ht-Z410_XAA_0124.indd 21
2008-01-24 �� 6:33:50
connections
RESET
. Plug the power cord of the wireless receiving module
in the wall outlet and switch the power switch ON.
M`
Place the wireless receiver module at the rear of the listening position. If the wireless
receiver module is too close to the main unit, some sound interruption may be heard due
to interference.
` If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment,
or any other device that uses the same frequency (5.8GHz) near the system, some sound
interruption may be heard due to interference.
` The transmission distance from the main unit to the wireless receiving module is about 33
feet (10m), but may vary depending on your operating environment. If a steel-concrete wall
or metallic wall is between the main unit and the wireless receiver module, the system may
not operate at all, because the radio wave cannot penetrate metal.
` This product(HT-Z410) is compatible with the wireless receiver module SWA-3000.
` Do not insert any other card except the TX card dedicated to the product.
If a different TX card is used, the product may be damaged or the card may not be
removed easily.
` Do not insert the TX card upside down or in the reverse direction.
` Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned
on may cause a problem.
` If the TX Card is inserted and wireless receiving module setting is complete, sound is not
output from the Rear Speaker connectors on the main unit.
` The wireless receiving antenna is built into the wireless receiver module. Keep the unit
away from water and moisture.
` For optimal listening performance, make sure that the area around the wireless receiver
module location is clear of any obstructions.
` If no sound is heard from the wireless rear speakers, switch the mode to DVD 5.1
channel or Dolby ProLogic II .
` In 2-CH mode, no sound will be heard from the wireless rear speakers.
22
Ht-Z410_XAA_0124.indd 22
2008-01-24 �� 6:33:50
EnG
COnnECtinG tHE ViDEO OUt tO yOUr tV
Choose one of the three methods for connecting to a TV.
METHOD2
● COnnECtiOnS
METHOD3
(supplied)
METHOD1
mEtHOD 1 : HDmi
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI
IN jack on your TV.
mEtHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the
Component Video Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input
Connectors on your TV.
mEtHOD 3 : Composite Video
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO
IN jack on your TV.
M`
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p.
` This product operates in Interlace scan mode (480i) for Component Output.
` After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
` If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Home Theater
using the TV's remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).)
` Please check the
logo (If your TV has an
logo, then it supports Anynet+ function.)
2
HT-Z410_XAA_0124.indd 23
2008-01-24 �� 6:33:54
connections
HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable
while power is on. For possible HDMI resolutions, see page 25.
~ HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
Using HDMI, the DVD Home Theater transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
~ HDMI connection description
HDMI connector - Supports video and digital audio data.
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
~ Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is
digital. Therefore either a digital-to-analog converter (in the DVD Home Theater) or an analog-to-digital converter (in
the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI
technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV.
~ What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI
from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device
(TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
~ What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+
feature.
- If your Samsung TV has an
logo, then it supports the Anynet+ function.
-If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on
automatically and switch to HDMI mode.
- If you turn on the player and press the Play button with a disc already inserted, the TV will immediately turn on
and switch to HDMI mode.
24
Ht-Z410_XAA_0124.indd 24
2008-01-24 �� 6:33:54
EnG
HDmi fUnCtiOn
resolution Selection
This function allows the user to select the screen resolution for
HDMI output.
M`
If the TV does not support the configured
resolution, you will not be able to see the picture
properly.
` When an HDMI cable is connected, composite and
component video signals are not output.
` See your TV owner's manual for more information on
how to select the TV's Video Input source.
● COnnECtiOnS
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition) button on the remote control.
~ Resolutions available for the HDMI output are 480p, 720p,
1080i/1080p.
~ SD(Standard Definition) resolution is 480p and HD
(High Definition) resolution is 720p, 1080i/1080p.
Why use HDmi (High Definition
multimedia interface)?
This device transmits a DVD video
signal digitally without the process
of converting to analog. You will get
sharper digital pictures when using
an HDMI connection.
Using anynet+(HDmi-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control, Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable.
This is only available with SAMSUNG TVs that support Anynet+.
1. Connect the main unit of the Home Theater to a Samsung
TV with an HDMI cable. (See page 23)
2. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
~ You can operate the Home Theater by using the TV
remote control. (Available TV buttons : ,
,
,
, and , buttons, ~ button)
THEAT
With anynet+
You can operate this unit, power
on your TV, or watch a movie by
pressing the Play button on your
Samsung TV's remote control.
,
if you select the tV
Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+
button on your TV remote control.
• receiver : On : You can listen to audio through the Home Theater.
• receiver : Off : You can listen to audio through the TV.
MOVE
MOVE
ENTER
ENTER
EXIT
EXIT
Move
Enter
Exit
if you select the tHEatEr
Select tHEatEr to connect and set the option of each item below.
• View tV : If anynet+(HDMI CEC) is set to on and you select View TV, the
home theater will automatically switch to digital in mode.
• theater menu : you can access and control the Home theater menu.
• theater Operation : The Home Theater disc playback
information will be displayed. You can
control the Disc operation of the
Home Theater such as title, chapter
and subtitle change.
• receiver : On : You can listen to audio through the Home Theater.
• receiver : Off : You can listen to audio through the TV.
M`
THEAT
MOVE
ENTER
EXIT
Move
Enter
In case that you chose 'View TV', if you want to listen to TV sound through Digital In, you
have to connect the optical cable between the TV and the Home Theater.
Exit
25
Ht-Z410_XAA_0124.indd 25
2008-01-24 �� 6:33:58
connections
Connecting an iPod
You can listen to the audio from an iPod through the main unit. For iPod operation with this Home Theater, see
pages 27 and 46.
1. Connect the iPod dock connector to the iPod jack on the DVD home theater.
2. Press the PORT button on the remote control to select iPod input.
~ You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ OSD iPOD ➞ FM.
M`
`
`
`
`
As the cable ports are close together, be sure to remove the wireless adaptor before
disconnecting the ipod docking cable.
Depending on the type of iPod. You may need to insert one of the dock slots into the dock
before you station your iPod (see next page).
Adjust the volume to a moderate level before you connect your iPod and DVD home
theater.
When the unit is powered on and you connect an iPod, the unit will charge your iPod's
battery.
Make sure to connect the dock connector so that the
label “SAMSUNG” faces upward.
26
HT-Z410_XAA_0124.indd 26
2008-01-24 �� 6:34:00
EnG
iPod models compatible with the dock
20GB
40GB
20GB, 30GB
(color display)
40GB, 60GB
(color display)
nano
(1GB, 2GB, 4GB)
nano (aluminum)
(2GB, 4GB, 8GB)
30GB (video)
60GB, 80GB (video)
the following 5 models must be used with the applicable dock insert as well as the dock before
they can be connected to the system.


AH63-01588A
iPhone (4GB, 8GB)
classic (80GB)

AH63-01585A

AH63-01586A
classic (160GB)
● COnnECtiOnS
mini (4GB, 6GB)
nano (video)
(4GB, 8GB)
AH63-01587A

AH63-01589A
touch (8GB, 16GB)
1
M`
2
The provided dock insert includes 5 different types. Check the dock insert for the iPod model
name on its rear side before use. (The dock insert for Classic 160 GB has the model name on
the bottom.)
2
Ht-Z410_XAA_0124.indd 27
2008-01-24 �� 6:34:03
connections
Connecting Audio from External Components
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
DISC
CHANGE
FUNCTION
PHONES
VOLUME
AUX IN 1
ASC IN
Audio Cable
(not supplied)
Audio OUT
1. Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3
player.
2. Press the AUX button on the remote control to select AUX1 input.
~ You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ OSD iPOD ➞ FM.
28
Ht-Z410_XAA_0124.indd 28
2008-01-24 �� 6:34:04
EnG
aUX2 : rear Panel
OPtiCaL : rear Panel
ipod
AUX IN 2
External Analog Component
● COnnECtiOnS
Optical Cable
(not supplied)
Audio Cable (not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
External Digital Component
aUX2 : Connecting an External analog Component
Analog signal components such as a VCR.
1. Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
~ Be sure to match connector colors.
2. Press the aUX button on the remote control to select aUX 2 input.
~ You can also use the fUnCtiOn button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.in ➞ aUX 1 ➞ aUX 2 ➞ USB ➞ OSD iPOD ➞ fm.
M`
You can connect the Video Output jack of your VCR to the TV, and connect the Audio
Output jacks of the VCR to this product.
OPtiCaL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2. Press the aUX button on the remote control to select DiGitaL in.
~ You can also use the fUnCtiOn button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.in ➞ aUX 1 ➞ aUX 2 ➞ USB ➞ OSD iPOD ➞ fm.
2
Ht-Z410_XAA_0124.indd 29
2008-01-24 �� 6:34:07
connections
Connecting the FM Antenna
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2. S
lowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
FM Antenna
(supplied)
M`
This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
~ Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise
and may damage it.
~ Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
30
HT-Z410_XAA_0124.indd 30
2008-01-24 �� 6:34:09
EnG
before using your home theater
The DVD Home Theater's remote can be used to control Samsung TVs.
1. Plug the main unit's power cord into the AC power supply.
● BEfOrE USinG yOUr HOmE tHEatEr
DISC
CHANGE
FUNCTION
VOLUME
2. Press the DVD rECEiVEr button to operate the DVD Home
Theater.
. Press the fUnCtiOn button on the main unit or DVD button
on the remote to enable DVD/CD playback.
. Press the tV button to set the remote to TV mode.
5. Press the POWEr button to turn on your Samsung TV
with this remote.
VIDEO
. Press the tV/ViDEO button to select VIDEO mode
on your TV.
1
HT-Z410_XAA_0124.indd 31
2008-01-24 �� 6:34:10
playback
DiSC PLayBaCK
dB
1. Press the OPEn/CLOSE (
) button to open the disc tray.
2. Load a disc.
~ Place a disc gently into the tray with the disc’s label
facing up.
DISC
CHANGE
FUNCTION
VOLUME
. Press the DiSC SKiP button.
~ Rotate the carousel tray so you can load the third,
fourth, and fifth discs.
. Close the compartment by pressing the OPEn/CLOSE (
button again.
~ Playback starts automatically.
)
to stop playback, press the StOP ( ) button during playback.
~ If pressed once, PrESS PLay is displayed and the stop position will be stored in memory.
If the PLay ( ) button or EntEr button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
~ If pressed twice, StOP is displayed, and if the PLay ( ) button is pressed, playback starts from the
beginning.
to temporarily pause playback, press the PaUSE (
) button during playback.
~ To resume playback, press the PLay ( ) button.
M`
Depending on the content of the disc, the initial screen may appear different.
` Pirated discs will not run in this player because it violates the CSS (Content Scrambling System :
a copy protection system) recommendations.
Selecting a Disc in the Disc changer
To select a specific disc, press the corresponding the DIRECT
PLAY (1, 2, 3, 4, 5) buttons on the front panel or the DiSC SKiP
button on the remote control, until the required disc indicator
flashes.
~ If the disc selected is not loaded, the next disc is played
automatically.
2
HT-Z410_XAA_0124.indd 32
2008-01-24 �� 6:34:12
EnG
mP3/Wma-CD PLayBaCK
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
A
● PLayBaCK
1. Place the MP3/WMA disc on the disc tray.
~ The MP3/WMA menu screen will appear and
playback will start.
~ The appearance of the menu depends on the
MP3/WMA disc.
~ WMA-DRM files cannot be played.
2. In Stop mode, use the Cursor ,,, button
to select the album, and then press the EntEr button.
~ Use the Cursor , button to select the track.
. To change the album, use the Cursor ,,,
button to select another album in Stop mode, and then
press the EntEr button.
. Press the StOP (T) button to stop playback.
M`
Depending on the recording mode, some MP3/WMA-CDs may not play.
` Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded
on the disc.
to play a file icon in the screen,
~ Press the Cursor ,,, button when it is in Stop mode and select a desired icon from the
top part of the menu.
music file icon : To play music files only, select the
Icon.
image file icon : To view image files only, select the
Icon.
movie file icon : To view movie files only, select the
Icon.
all file icon : To view all files select the
Icon.
HT-Z410_XAA_0124.indd 33
2008-01-24 �� 6:34:14
playback
JPEG fiLE PLayBaCK
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back
with this Home Theater.
G
Slide mode
Place the JPEG disc on the disc tray.
~ Playback starts automatically. Each image is displayed
for 5 seconds and then the next image is displayed.
Press the [,] button to skip to the next slide.
~ Each time the button is pressed, the slide moves backward or forward.
G
rotate/flip function
Press the Cursor ,,, button during playback.
button: Flip Vertically
button: Rotate 90°
Counterclockwise
button: Rotate 90°
Clockwise
Original Image
button: Flip Horizontally
ENtER SELECt
M`
The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
` If a JPEG file is played when the HDMI output
resolution is 720p/1080i/1080p, the mode is automatically converted to 480p mode.
HT-Z410_XAA_0124.indd 34
2008-01-24 �� 6:34:16
EnG
DiVX PLayBaCK
The functions on this page apply to DivX disc playback.
D
Skip forward/Back
fast Playback
● PLayBaCK
During playback, press the [,] button.
~ Goes to the next file whenever you press the ] button,
if there are over 2 files in the disc.
~ Goes to the previous file whenever you press the
[ button, if there are over 2 files in the disc.
D
During playback, press the (,) button.
To play back the disc at a faster speed, press the ( or
) button during playback.
~ Each time you press either button, the playback speed
will change as follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ normal.
5 minute Skip function
D
During playback, press the Cursor , button.
~ Playback skips 5 minutes forward whenever you press
the Cursor  button.
~ Playback skips 5 minutes back whenever you press the
Cursor  button.
audio Display
D
Press the aUDiO button.
~ If there are multiple audio languages on a disc, you can
toggle between them.
~ Each time you press the button, your selection will toggle
between aUDiO (1/n, 2/n ...) and .
M`
is displayed when there is one supported language in the disc.
Subtitle Display
D
Press the SUBtitLE button.
~ Each time you press the button, your selection will toggle
between SUBtitLE (1/n, 2/n ...) and SUBtitLE Off.
~ If the disc has only one subtitle file, it will be played
automatically.
~ See number 2 (Caption Function) on the next page for
more details concerning Subtitle usage with DivX discs.
5
HT-Z410_XAA_0124.indd 35
2008-01-24 �� 6:34:19
playback
DiVX PLayBaCK
D
if the Disc has more than One Subtitle file
If the disc has more than one subtitle file, the default
subtitle may not match the movie and you will have
to select your subtitle language as follows:
1. In Stop mode, press the Cursor , button, select the
desired subtitle ( ) from the TV screen, and then
press the EntEr button.
2. When you select the desired DivX file from the TV
screen, the movie will be played normally.
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to
provide audio and video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at
near DVD-quality video and audio.
1. Supported formats
This product only supports the following media formats.If both video and audio formats are not
supported, you may experience problems such as broken images or no sound.
Supported Video Formats
format
aVi
WmV
Supported Versions
DivX3.11~DivX5.1, XviD
V1/V2/V3/V7
Supported Audio Formats
format
mP3
Wma
aC3
DtS
Bit Rate
80~384kbps
56~128kbps
128~384kbps
1.5Mbps
44.1/48khz
44.1khz
Sampling Frequency
44.1khz
~ DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.
~ Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports
up to 800x600 pixels (16:9). TV screen resolutions higher than 800 will not be supported.
~ When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may
experience shaking on the screen during playback.
2. Caption function
~ You must have some experience with video extraction and editing in order to use this feature
properly.
~ To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
~ Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean
and Chinese) for the file name.
HT-Z410_XAA_0124.indd 36
2008-01-24 �� 6:34:20
dBAGD
Displaying Disc information
EnG
USinG tHE PLayBaCK fUnCtiOn
You can view disc playback information on the TV screen.
Press the infO button.
● PLayBaCK
M`
Depending on the disc, the disc information
display may appear different.
` Depending on the disc, you can also select
DTS, DOLBY DIGITAL, or PRO LOGIC.
appears on the tV screen!
If this symbol appears on the TV screen when pressing
a button, that operation is not possible with the disc
currently being played.
Screen Display
DVD
AUDIO
DVD display
TITLE display
ELAPSED TIME
display
STEREO (L/R)
display
DVD-AUDIO
display
CHAPTER
display
REPEAT
PLAYBACK display
DOLBY DIGITAL
display
CD display
TRACK (FILE)
display
AUDIO LANGUAGE
display
ANGLE display
GROUP display
SUBTITLE display
Checking the remaining time
dBA
Press the rEmain button.
~ For checking the total and remaining time of a title or
chapter being played.
Each time the remain button is pressed
DVD-VIDEO
DVD-AUDIO
titLE ELaPSED ➞ titLE rEmain ➞ CHaPtEr ELaPSED ➞ CHaPtEr rEmain
GrOUP ELaPSED ➞ GrOUP rEmain ➞ traCK ELaPSED ➞ traCK rEmain
B traCK ELaPSED ➞ traCK rEmain ➞ tOtaL ELaPSED ➞ tOtaL rEmain
A traCK rEmain ➞ traCK ELaPSED
HT-Z410_XAA_0124.indd 37
2008-01-24 �� 6:34:23
playback
USinG tHE PLayBaCK fUnCtiOn
fast Playback
dBAD
Press the (,) button.
~ Each time the button is pressed during playback, the
playback speed changes as follows:
( 2X ➞ ( 4X ➞ ( 8X ➞ ( 32X ➞  PLay
) 2X ➞ ) 4X ➞ ) 8X ➞ ) 32X ➞  PLay
M`
During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
Slow Playback
dD
Press the SLOW button.
~ Each time the button is pressed during playback, the
playback speed changes as follows:
➞*1/4 ➞*1/8 ➞&1/2 ➞&1/4 ➞&1/8 ➞
d *1/2
PLay
D *1/2 ➞*1/4 ➞*1/8 ➞  PLay
M`
No sound is heard during slow playback.
` Reverse slow playback does not work with CD.
Skipping Scenes/Songs
dA
Press the [,] button.
~ Each time the button is pressed during playback, the
previous or next chapter, track or directory (file) will be
played.
~ You cannot skip chapters consecutively.
HT-Z410_XAA_0124.indd 38
2008-01-24 �� 6:34:25
dBAGD
Repeat playback allows you to repeatedly play a chapter, title,
track (song), or directory (MP3 file).
EnG
repeat Playback
Press the rEPEat button.
~ Each time the button is pressed during playback, the repeat
playback mode changes as follows:
rEPEat : CHaPtEr ➞ rEPEat : titLE ➞ rEPEat : Off
DVD-AUDIO
rEPEat : traCK ➞ rEPEat : GrOUP ➞ rEPEat : Off
B
AGD
● PLayBaCK
DVD-VIDEO
rEPEat : traCK ➞ rEPEat : DiSC ➞ rEPEat : Off
rEPEat : ranDOm ➞ rEPEat : traCK ➞ rEPEat : Dir ➞ rEPEat : DiSC
➞ rEPEat : Off
repeat Playback Options
CHaPtEr : Repeatedly plays the selected chapter.
titLE : Repeatedly plays the selected title.
GrOUP : Repeatedly plays the selected group.
ranDOm : Plays tracks in random order. (A track that has already been played may be played again.)
traCK : Repeatedly plays the selected track.
Dir : Repeatedly plays all tracks in the selected folder.
DiSC : Repeatedly plays the entire disc.
Off : Cancels Repeat Playback.
to Select a repeat Playback mode in the Disc information Screen
dB
1. Press the infO button twice.
2. Press the Cursor  button to move to REPEAT
PLAYBACK ( ) display.
. Press the Cursor  button to select the desired Repeat
Playback mode.
~ To select another album and track, repeat Steps 2 and
3 above.
. Press the EntEr button.
d Off ➞ a- ➞ CHaP ➞ titLE ➞ Off
B Off ➞ a- ➞ traCK ➞ DiSC ➞ Off
M`
For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information
display screen.
HT-Z410_XAA_0124.indd 39
2008-01-24 �� 6:34:26
playback
USinG tHE PLayBaCK fUnCtiOn
d
a-B repeat Playback
You can repeatedly play back a designated section of a DVD.
1. Press the infO button twice.
2. Press the Cursor  button to move to REPEAT
PLAYBACK
A( ) display.
. Press the Cursor , button to select a- and then press
the EntEr button.
~ When the EntEr button is pressed, the selected
position will be stored in memory. A -?
REPEAt : AÐ
. Press the EntEr button at the end of the desired
segment.
~ The specified segment will be played repeatedly.
A-B
d To return to normal playback, press the Cursor , button to select
M`
OFF.
A tO B REPEAt ON
The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
Step function
dD
Press the StEP button.
~ The picture moves forward one frame each time the button is
pressed during playback.
M`
No sound is heard during step motion playback.
0
Ht-Z410_XAA_0124.indd 40
2008-01-24 �� 6:34:28
This function allows you to view the same scene in different
angles.
EnG
d
angle function
1. Press the infO button.
2. Press the Cursor  button to move to ANGLE (
display.
)
1/3 ➞
M`
2/3 ➞
3/3 ➞
● PLayBaCK
. Press the Cursor , button or numeric buttons to select
the desired angle.
~ Each time the button is pressed, the angle changes as
follows:
1/3
The Angle function works only with discs on which multiple angles have been recorded.
d
Zoom (Screen Enlarge) function
This function allows you to enlarge a particular area of the
displayed image.
1. Press the ZOOm button.
2. Press the Cursor ,,, button to move to the area
you want to enlarge.
. Press the EntEr button.
~ Each time the button is pressed, the zoom level changes
as follows:
ZOOm X 1.5 ➞ZOOm X 2 ➞ZOOm X 3
SELECT ZOOM POSITION
➞ZOOm Off
ENtER SELECt
1
Ht-Z410_XAA_0124.indd 41
2008-01-24 �� 6:34:31
playback
USinG tHE PLayBaCK fUnCtiOn
Bonus Group
Some DVD-Audio discs have an extra ‘bonus’ group that
requires a 4-digit key number to access. See the disc
packaging for details and the key number.
DVD-AUDIO
BONUS GROUP�
KEY NUMBER :
When you play a DVD-Audio disc that has a bonus group, the
key number input screen appears automatically.
M`
If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
navigating Pages
DVD-AUDIO
During playback, press the .,, button on the remote control.
~ You can select the desired image from a DVD-Audio disc
containing still images.
~ With some discs, you may not be able to select images.
2
Ht-Z410_XAA_0124.indd 42
2008-01-24 �� 6:34:32
1. Press the infO button twice.
EnG
d
audio Language Selection function
2. Press the Cursor , button or numeric buttons to select
the desired audio language.
~ Depending on the number of languages on a DVD disc, a
different audio language (ENGLISH, SPANISH, FRENCH,
etc.) is selected each time the button is pressed.
d
Subtitle Language Selection function
1. Press the infO button twice.
2. Press the Cursor  button to move to SUBtitLE (
display.
● PLayBaCK
En 1/3 ➞ SP 2/3 ➞ fr 3/3 ➞ En 1/3
)
. Press the Cursor  button or numeric buttons to select the
desired subtitle.
En 01/03 ➞ SP 02/03 ➞ fr 03/03 ➞ Off/03 ➞
En 01/03
M`
To operate this function, you can also press the AUDIO or SUBTITLE buttons on the
remote control.
` Depending on the disc, the Subtitle and Audio Language functions may not be available.
dBAG
moving Directly to a Scene/Song
dB
1. Press the infO button.
2. Press the Cursor , button or numeric buttons to select
the desired title/track ( ) and then press the EntEr
button.
. Press the Cursor , button to move to the Chapter
( ) display.
. Press the Cursor , button or numeric buttons to select
the desired chapter and then press the EntEr button.
5. Press the Cursor , button to move to time (
) display.
. Press the numeric buttons to select the desired time
and then press the EntEr button.
HT-Z410_XAA_0124.indd 43
2008-01-24 �� 6:34:34
playback
USinG tHE PLayBaCK fUnCtiOn
dBAG
moving Directly to a Scene/Song
AG
Press the numeric buttons.
~ The selected file will be played.
~ When playing an MP3 or JPEG disc, you cannot use the
Cursor , button to move to a folder.
To move a folder, press the StOP (T) and then press the
Cursor , button.
M`
You can press the [,] button on the remote control to move directly to the desired title,
chapter, or track.
` Depending on the disc, you may not be able to move to the selected title or time.
d
Using the Disc menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
1. In Stop mode, press the mEnU button.
2. Press the Cursor , button or numeric buttons
to move to Disc menu and then press the
EntEr button.
~ When you select Disc Menu and it is not supported by
the disc, the "this menu is not
supported" message appears on the screen.
. Press the Cursor ,,, button to select the desired
item.
. Press the EntEr button.
d Press the EXit button to exit the setup screen.
MOVE
M`
ENTER
EXIT
The disc menu display may be different depending on the disc.
Ht-Z410_XAA_0124.indd 44
2008-01-24 �� 6:34:37
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the
availability of this feature may vary.
EnG
d
Using the title menu
1. In Stop mode, press the mEnU button.
2. Press the Cursor , button to move to title menu.
. Press the EntEr button.
~ The title menu appears.
● PLayBaCK
d Press the EXit button to exit the setup screen.
MOVE
M`
ENTER
EXIT
The Title menu display may be different depending on the disc.
5
Ht-Z410_XAA_0124.indd 45
2008-01-24 �� 6:34:38
playback
USinG tHE iPod
You can enjoy playback of your iPod using the supplied remote control.
1. Place the iPod in the Dock.
~ Your iPod is automatically turned on.
2. Connect the dock connector for iPod to the iPod jack on the DVD
home theater.
. Press the POrt button on the remote control to select iPod mode.
~ Each time the button is pressed, your selection will toggle between
iPod mode and USB mode.
. Use ,, and EntEr button on the remote control to display
the list of menu.
5. You can use the remote control or main unit to control simple
playback functions such as PLay, PaUSE, StOP, nEXt/PrEV,
and ff/rEW, and rEPEat.
d Press the rEtUrn button to return to the previous menu.
Listening by Category
1. Press the , buttons on the remote control to select music and
press the EntEr button.
~ The music categories appear.
2. Press the , buttons desired category and press the EntEr button.
~ The music files appear.
. Press the , buttons to select the fi le to play and press the EntEr
button
~ The music will start with a new screen which shows the song title,
time, artist, and progress bar.
M`
Not all iPods are compatible with this unit.
` This product may not work properly, depending on the software
version of iPod. Please download and install the latest software
version.
` This product does not support playing photos and movies from
your iPod.
music categories
File information including the artist name, album name, music title and genre will be displayed according
to the ID3 Tag information on the appropriate music fi le.
now Playing : Plays a recently played fi le or moves to the playback screen of the current fi le.
artists : To play by artist.
Songs : To play in numeric or alphabetical order
Playlists : To play by Playlist.
albums : To play by album.
Genres : To play by genre.
Composer : To play by composer.
M`
What is an iD3 tag?
This is what is attached to an MP3 to carry information relevant to the fi le such as
the title, artist, album, year, genre and a comment fi eld.
HT-Z410_XAA_0124.indd 46
2008-01-24 �� 6:34:39
EnG
PLayinG mEDia fiLES USinG tHE USB HOSt fEatUrE
You can enjoy media files such as pictures, movies and music saved on an MP3 player (except iPod), USB memory stick
or digital camera in high quality video with 5.1 channel Home Theater sound by connecting the storage device to the
USB port of the Home Theater.
1. Connect the USB device to the USB port on the front
of the unit.
DISC
CHANGE
FUNCTION
PHONES
VOLUME
AUX IN 1
ASC IN
● PLayBaCK
2. Press the fUnCtiOn button on the DVD Player or the
POrt button on the remote control to select the USB
mode.
~ USB appears on the display screen and then
disappears.
~ The USB MENU screen appears on the TV screen
and the saved file is played.
. To stop playback, press the StOP (T) button.
Safe USB removal
To prevent damage to the memory stored in the USB device,
perform safe removal before disconnecting the USB cable.
~ Press the StOP (T) button twice in a row.
The display will show rEmOVE USB.
~ Remove the USB cable.
M`
To listen to your music files with 5.1 channel home theater sound, you must set the Dolby
Pro Logic II mode to Matrix. (See page 58)
` In USB mode, you are not enabled to change the resolution or use the SETUP menu if there is
no USB device connected to the USB port.
Skip forward/Back
During playback, press the [,] button.
~ When there is more than one file and you press the ]
button, the next file is selected.
~ When there is more than one file and you press the [
button, the previous file is selected.
Ht-Z410_XAA_0124.indd 47
2008-01-24 �� 6:34:41
playback
fast playback
During playback, press the (,) button.
~ Each time you press either button, the playback speed
will change as follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ normal.
Compatible Devices
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc
in Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
. Digital camera: Cameras that support USB Mass Storage v1.0.
~ Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
~ You may experience a difference in playback quality when you connect a USB1.1 device.
~ For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
~ Depending on the manufacturer. the USB card reader may not be supported.
~ If you install multiple memory devices into a multi card reader, you may experience problems.
. If you use a USB extension cable, the USB device might not be recognized.
Supported formats
format
file name
file
extension
Bit rate
Version
Pixel
Sampling
Frequency
Still Picture
JPG
JPG .JPEG
–
–
640x480
–
MP3
.MP3
80~384kbps
–
–
44.1kHz
WMA
.WMA
56~128kbps
V8
–
44.1kHz
WMV
.WMV
4Mbps
V1,V2,V3,V7
720x480
44.1KHz~48KHz
DivX
.AVI,.ASF
4Mbps
DivX3.11~
DivX5.1, XviD
720x480
44.1KHz~48KHz
music
movie
~ CBI (Control/Bulk/Interrupt) is not supported.
~ Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
~ A device using NTFS file system is not supported. (The system supports only the FAT file system and
will not play a movie in larger than 1 GB in USB mode.)
~ Some MP3 players, when connected to this product, may not operate depending on the sector size
of their file system.
~ The USB host function is not supported if a product that transfers media files by its manufacturerspecific program is connected.
~ Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
~ the USB host function of this product does not support all USB devices. for information on
supported devices, see page 66.
Ht-Z410_XAA_0124.indd 48
2008-01-24 �� 6:34:42
EnG
system setup
For your convenience, you can set this DVD Home Theater's features for the best use in your home
environment.
Setting the Language
OSD(On-Screen Display) language is set to English by default.
● system setup
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Setup and then press the
ENTER button.
. Select Language and then press the ENTER button.
. Press the Cursor $,% button to select OSD Language and then
press the ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
5. Press the Cursor $,% button to select the desired language
and then press the ENTER button.
~ Once the setup is complete, the OSD will be English if
English has been selected as language.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
~ OSD LANGUAGE : Selecting the OSD Language
~ AUDIO : Selecting the Audio Language (recorded on the disc)
~ SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
~ DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
a If the language you selected is not recorded on the disc, menu
language will not change even if you set it to your desired language.
~ OTHERS : To select another language, select OTHERS and
enter the language code of your country.
AUDIO, SUBTITLE and DISC MENU languages can be
selected.
49
Ht-Z410_XAA_0124.indd 49
2008-01-24 �� 6:34:42
system setup
Setting TV Screen Type
Depending on your TV type (Widescreen or conventional 4:3), you can select the TV's aspect ratio.
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Setup and then press the
ENTER button.
. Press the Cursor % button to move to TV DISPLAY and then
press the ENTER button.
. Press the Cursor $,% button to select the desired item
and then press the ENTER button.
~ Once the setup is complete, you will be taken to the
previous screen.
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either 4:3PS or 4:3LB option according to personal preference.
Select WIDE/HDTV if you have a widescreen TV.
4:3PS (4:3 Pan&Scan)
Select this to play a 16:9 picture in the pan & scan mode on a conventional
TV.
~ You can see the central portion of the screen only (with the sides of the
16:9 picture cut off).
4:3LB (4:3 Letterbox)
Select this to play a 16:9 picture in the letter box mode on a conventional
TV.
~ Black bars will appear at the top and bottom of the screen.
WIDE/HDTV
Select this to view a 16:9 picture in the full-screen mode on your
widescreen TV.
~ You can enjoy the widescreen aspect.
M`
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
` Since DVD discs are recorded in various image formats, they will look different depending
on the software, the type of TV, and the TV aspect ratio setting.
` When using HDMI, the screen is automatically converted to Wide mode.
50
Ht-Z410_XAA_0124.indd 50
2008-01-24 �� 6:34:43
EnG
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Setup and then press the
ENTER button.
. Press the Cursor % button to move to PARENTAL and then press
the ENTER button.
5. E
nter the password and then press the ENTER button.
~ The password is set to "7890" by default.
~ Once the setup is complete, you will be taken to the previous screen.
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
RETURN
EXIT
● system setup
. Press the Cursor $,% button to select the desired rating level and
then press the ENTER button.
~ If you have selected Level 6, you cannot view DVDs with Level 7
or higher.
~ The higher the level, the closer the content is to violent or adult
material.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M`
This function works only if a DVD disc contains the rating level information.
Setting the Password
You can set the password for the Parental (rating level) setting.
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Setup and then press the
ENTER button.
. Press the Cursor % button to move to PASSWORD and then
press the ENTER button.
. Press the ENTER button.
MOVE
ENTER
5. Enter the password and then press the ENTER button.
~ Enter the old password, a new password, and confirm new
password.
~ The setting is complete.
MOVE
M`
SELECT
RETURN
EXIT
The password is set to "7890" by default.
If you have forgotten the rating level password, do the following
~ While the player is in No DIsc mode, hold the DVD Players STOP (T) button for longer than
5 seconds. INITIAL appears on the display and all settings will return to the default values.
~ Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
51
Ht-Z410_XAA_0124.indd 51
2008-01-24 �� 6:34:43
system setup
SEttinG tHE WaLLPaPEr
dG
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
1. During playback, press the PaUSE button when
an image you like appears.
2. Press the LOGO button.
~ COPy LOGO Data will be displayed on the TV screen.
. The power will turn off and then back on.
~ The selected wallpaper will be displayed.
~ You can select up to 3 wallpaper settings.
COPY LOGO DATA
M`
This function will not work when the HDMI output is 720p, 1080i or 1080p.
tO SELECt OnE Of tHE 3 WaLLPaPEr SEttinGS yOU'VE maDE
1. In Stop mode, press the mEnU button.
2. Press the Cursor % button to move to Setup and then
press the EntEr button.
. Press the Cursor % button to move to LOGO and then
press the EntEr button.
. Press the Cursor $,% button to select the desired USEr,
and then press the EntEr button.
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
~ This selects one of the 3 wallpaper screens.
5. Press the EXit button to exit the setup screen.
~ OriGinaL : Select this to set the Samsung Logo image as
your wallpaper.
~ USEr : Select this to set the desired image as your
wallpaper.
d Press the rEtUrn button to return to the previous level.
d Press the EXit button to exit the setup screen.
52
Ht-Z410_XAA_0124.indd 52
2008-01-24 �� 6:34:45
EnG
DVD Playback Mode
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit
to DVD-Video mode.
1. Press the MENU button while the disc tray is open.
2. Press the Cursor % button to move to Setup and then press the
ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
● system setup
. Press the Cursor % button to move to DVD TYPE and then press the ENTER button.
. Press the Cursor $,% button to move to DVD VIDEO and then
press the ENTER button.
~ Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
~ DVD VIDEO : Set to play the DVD video contents contained on
a DVD audio disc.
~ DVD AUDIO : Set to play the default DVD audio.
M`
DVD Play mode is set to DVD Audio as factory default setting.
` Powering off the main unit will automatically switch to the DVD Audio mode.
DviX (R) Registration
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted according to
your speaker configuration and whether certain speakers are used or not.
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Audio and then press the
ENTER button.
. In the SPEAKER SETUP, press the ENTER button again.
. Press the Cursor ,,, button to move to the desired speaker
and then press the ENTER button.
MOVE
ENTER
MOVE
CHANGE
RETURN
EXIT
~ For C, SL, and SR, each time the button is pressed, the mode switches
alternately as follows : SMALL ➞ NONE.
~ For L and R, the mode is set to SMALL.
~ SMALL : Select this when using the speakers.
~ NONE : Select this when no speaker is connected.
d Press the RETURN button to return to the previous level.
EXIT
RETURN
d Press the EXIT button to exit the setup screen.
M`
Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 58).
53
HT-Z410_XAA_0124.indd 53
2008-01-24 �� 6:34:46
system setup
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay
time of the audio signals from the center and rear speakers.
1.
2.
.
.
5.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the ENTER button.
Press the Cursor % button to move to DELAY TIME and then press the ENTER button.
Press the Cursor ,,, button to move to the desired speaker and then press the ENTER button.
Press the Cursor , to set the Delay time.
~ You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each
speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can
adjust this difference by adding a delay effect to the sound of the Center and Rear Speakers.
Setting CENTER SPEAKER
Ideal CENTER SPEAKER
placement
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Df and Dc
0.00 inch
Delay Time
0 ms
1 feet,
2 feet,
3 feet,
4 feet,
1.39 inches
2.77 inches
5.73 inches
7.12 inches
5 feet,
9.29 inches
1 ms
2 ms
3 ms
4 ms
5 ms
Ideal REAR
SPEAKER
placement
Setting REAR SPEAKER
If the distance of Dc is equal to or longer than the distance of Df
in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between
Df and Dc
0.00 inch
Delay Time
0 ms
M
3 feet,
6 feet,
10 feet,
13 feet,
17 feet,
5.73 inches
11.7 inches
4.80 inches
10.54 inches
4.27 inches
3 ms
6 ms
9 ms
12 ms
15 ms
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Dr: The distance from REAR SPEAKER
` With PL II (Dolby Pro Logic II), the delay time may be different for each mode.
` With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
` The Center channel is only adjustable on 5.1 channel discs.
54
Ht-Z410_XAA_0124.indd 54
2008-01-24 �� 6:34:47
EnG
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Audio and then press the
ENTER button.
MOVE
ENTER
RETURN
EXIT
● system setup
. Press the Cursor % button to move to TEST TONE and then press
the ENTER button.
~ The test tone will be sent to L ➞ C ➞ R ➞ SR ➞ SL ➞ SW in
order.
If the ENTER button is pressed again at this time, the test tone
will stop.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
STOP
EXIT
Setting the Audio
You can adjust the balance and level for each speaker.
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Audio and then press the
ENTER button.
. Press the Cursor % button to move to SOUND EDIT and then
press the ENTER button.
. Press the Cursor , button to select and adjust the desired item.
Press the Cursor , button to adjust the settings.
MOVE
ENTER
RETURN
EXIT
MOVE
CHANGE
RETURN
EXIT
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
55
Ht-Z410_XAA_0124.indd 55
2008-01-24 �� 6:34:47
system setup
SEttinG tHE aUDiO
manually adjusting the Speaker Volume and Balance with the SOUnD EDit Button.
Press the SOUnD EDit button and then press the
Cursor , button.
adjusting front/rear Speaker Balance
` You can select between 00, -06, and OFF.
` The volume decreases as you move closer to –6.
adjusting Center/rear/Subwoofer Speaker Level
` The volume level can be adjusted in steps from +6dB to –6dB.
` The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
SEttinG tHE DrC (DynamiC ranGE COmPrESSiOn)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
1. In Stop mode, press the mEnU button.
2. Press the Cursor % button to move to audio and then press the
EntEr button.
. Press the Cursor % button to move to DrC and then press the
EntEr button.
. Press the Cursor , to adjust the DrC.
~ When the Cursor  button is pressed, the effect is greater, and
when the Cursor  button is pressed, the effect is smaller.
MOVE
ENTER
RETURN
EXIT
RETURN
EXIT
d Press the rEtUrn button to return to the previous level.
d Press the EXit button to exit the setup screen.
CHANGE
5
HT-Z410_XAA_0124.indd 56
2008-01-24 �� 6:34:48
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to
match the video.
EnG
Setting the AV SYNC
1. In Stop mode, press the MENU button.
2. Press the Cursor % button to move to Audio and then press the
ENTER button.
. Press the Cursor , button to select the AV-SYNC Delay Time
and then press the ENTER button.
~ You can set the audio delay time between 0 ms and 300 ms. Set
it to the optimal status.
MOVE
ENTER
MOVE
SELECT
RETURN
● system setup
. Press the Cursor % button to move to AV-SYNC and then press
the ENTER button.
EXIT
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
RETURN
EXIT
Setting the HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1. In Stop mode, press the MENU button.
2. Press the Cursor  button to move to Audio and then press the
ENTER button.
. Press the Cursor  button to move to HDMI AUDIO and then
press the ENTER button.
. Press the Cursor , button to select ON or OFF and then press the ENTER button.
MOVE
ENTER
MOVE
SELECT
RETURN
EXIT
• ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your
TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
RETURN
EXIT
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M`
The default setting of this function is HDMI AUDIO OFF.
` HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
57
Ht-Z410_XAA_0124.indd 57
2008-01-24 �� 6:34:52
system setup
SOUnD fiELD (DSP)/EQ fUnCtiOn
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.
EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
Press the DSP/EQ button.
~ DSP appears on the display panel.
Each time the button is pressed, the selection changes as follows:
POPS ➞ JaZZ ➞ rOCK ➞ StUDiO ➞ CLUB ➞ HaLL ➞ mOViE ➞ CHUrCH ➞ PaSS
~ POPS, JaZZ, rOCK : Depending on the genre of music, you can select POP, JAZZ, and ROCK.
~ StUDiO : Provides a sense of presence as if in a studio.
~ CLUB : Simulates the sound of a dance club with a throbbing
bass beat.
~ HaLL : Provides a clear vocal as if listening in a concert hall.
~ mOViE : Provides the feeling of a movie theater.
~ CHUrCH : Gives the feel of being in a grand church.
~ PaSS : Select this for normal listening.
M`
The DSP/EQ function is only available in STEREO mode.
Press the PL ii mode button to show STEREO on the display.
` This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and Dolby Digital discs.
` When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and DSP/EQ function does not work.
DOLBy PrO LOGiC ii mODE
You can select the desired Dolby Pro Logic II audio mode.
Press the
PL ii mODE button.
~ Each time the button is pressed, the mode changes as follows.
mUSiC ➞ CinEma ➞ PrO LOGiC ➞ matriX ➞
StErEO ➞ mUSiC
PrO LOGiC ii
~ mUSiC : When listening to music, you can experience
sound effects as if you are listening to the actual
performance.
~ CinEma : Adds realism to the movie soundtrack.
~ PrO LOGiC : You will experience a realistic multi-channel effect, as if using five speakers, while using
just the front left and right speakers.
~ matriX : You will hear 5.1 channel surround sound.
StErEO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
M`
When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen
to surround sound.
5
Ht-Z410_XAA_0124.indd 58
2008-01-24 �� 6:34:53
EnG
DOLBy PrO LOGiC ii EffECt
This function works only in Dolby Pro Logic MUSIC mode.
1. Press the
PL ii mODE button to select mUSiC mode.
2. Press the
PL ii EffECt button.
~ Each time the button is pressed, the mode changes as
follows.
● SyStEm SEtUP
. Press the , buttons to select the desired effect setting.
~ PANORAMA : You can select either 0 or 1.
~ C- WIDTH : You can select between 0 and 7.
~ DIMENS : You can select between 0 and 6.
P.BaSS
P.BASS function boosts the bass for a more powerful
sound.
1. Press the P.BaSS button to select P.BaSS mode.
2. Press the P.Bass button again to turn off the P.Bass mode.
M`
The P.BASS function is only available with 2 channel LPCM sources such as mp3,Divx,cd
and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen.
` The P.bass does not work with DSP/EQ or DOLBY PRO LOGIC ll modes.
If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and
the P. BASS function comes on.
5
Ht-Z410_XAA_0124.indd 59
2008-01-24 �� 6:34:55
system setup
ASC (Auto Sound Calibration) SETUP
By setting the ASC function just once when you relocate or install the unit, you can have the unit
automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create a 5.1-channel sound field optimized for your environment.
ASC
Microphone
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
SW: Subwoofer
SL: Rear Speaker (L)
SR: Rear Speaker (R)
M`
ASC
SETUP can be made when there is no disc in the unit, or it is in Stop mode with a
DVD/CD inserted.
` Because the volume level of the tone is fixed during the ASC setup, you cannot adjust the
volume using the volume control buttons.
` If the auto sound microphone is disconnected during the ASC setup, the setup will be
cancelled.
` When ASC function is activated, the DSP/EQ, DOLBY PRO LOGIC ll, and P. BASS sound
effects will not work.
To Verify the ASC
Briefly press ASC button.
~ Distance and level values specified for each channel will appear in the display.
60
HT-Z410_XAA_0124.indd 60
2008-01-24 �� 6:34:55
EnG
aSC (auto Sound Calibration) SEtUP
1. Plug the ASC microphone into the ASC input jack.
2. Place the ASC microphone at the listening position.
. Press aSC button.
~ To create the optimal 5.1 channel sound field, the
selections are in the following sequence:
L ➞ C ➞ r ➞ Sr ➞ SL ➞ SW
● SyStEm SEtUP
. When the message "REMOVE MIC" appears in the display,
unplug the ASC microphone.
M`
Setting the ASC function takes about 3 minutes.
to cancel the aSC (auto Sound Calibration) setup, press aSC
button.
The tone output stops, "CANCEL ASC" appears in the display followed by "REMOVE MIC", and the
setup is cancelled.
to listen in the aSC (auto Sound Calibration) mode, briefly press
aSC button.
The selection alternates between ASC ON and ASC OFF in the display.
If you select "ASC ON", you will hear sound in the ASC mode.
If you select "ASC OFF", you will hear sound in the mode set in the audio setting of the setup screen.
1
HT-Z410_XAA_0124.indd 61
2008-01-24 �� 6:34:56
radio
LISTENING TO RADIO
Remote Control
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the #,$ button is
pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the ,,.
button to automatically search for active
broadcasting stations.
• Manual Tuning : Briefly press the ,,. button to
increase or decrease the frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP (¦) button to select PRESET and then press the #,$
button to select the preset station.
• Automatic Tuning 2 : Press the STOP (¦) button to select MANUAL and then press and hold
the #,$ button to automatically search the band.
• Manual Tuning : Press the STOP (¦) button to select MANUAL and then briefly press
the
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
• Each time the button is pressed, the sound switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory
1. Press the TUNER button to select the FM band.
2. Press the ,,. button to select 89.10.
3. Press the TUNER MEMORY button.
4. Press the #,$ button to select preset number.
• You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
6. To preset another station, repeat steps 2 to 5.
• To tune in to a preset station, press the #,$
button on the remote control to select a channel.
62
HT-Z410_XAA_0125.indd 62
2008-01-25 �� 6:01:12
EnG
convenient function
SLEEP timEr fUnCtiOn
You can set the time that the Home Theater will shut itself off.
Press the SLEEP button.
● COnVEniEnt fUnCtiOn
~ SLEEP will be displayed. Each time the button is pressed, the
preset time changes as follows :
10 ➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF.
To confirm the sleep timer setting, press the SLEEP button.
~ The remaining time before the Home Theater will shut itself off is
displayed.
~ Pressing the button again changes the sleep time from what you
have set earlier.
To cancel the sleep timer, press the SLEEP button until Off appears on the display.
aDJUStinG DiSPLay BriGHtnESS
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press the DimmEr button.
~ Each time the button is pressed, the brightness of front display will
be adjusted.
mUtE fUnCtiOn
This is useful when answering a doorbell or telephone call.
Press the mUtE button.
~ mUtE appears in the display.
~ To restore the sound, press the mUtE button again.
HT-Z410_XAA_0124.indd 63
2008-01-24 �� 6:34:59
troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest
authorized dealer or Samsung Electronics Service Center.
SYMPTOM
Check/Remedy
Disc tray does not open.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
‘Please connect your ipod’
appears on the screen.
• Remove the iPod from the docking cradle and reinsert again.
• If the battery level of your iPod is totally drained, you
have to charge it again before use.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and
step motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound can be heard only from a
few speakers and not all six.
• When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select "PRO LOGIC II" by pressing
PL II (Dolby Pro Logic II) on the remote control to use all
six speakers.
• Make sure that the DVD disc is 5.1-CH compatible.
• If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C,
SL, and SR to SMALL.
Dolby Digital 5.1 CH Surround
Sound is not produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby
Digital 5.1 CH Surround Sound is produced only if the disc is
recorded with 5.1 channel sound.
• Is the audio language correctly set to DOLBY DIGITAL
5.1-CH in the information display?
The remote control does not
work.
• Is the remote control being operated within its operation
range of angle and distance?
• Are the batteries exhausted?
• Have you selected the mode(TV/DVD) functions of the
remote control (TV or DVD) correctly?
64
HT-Z410_XAA_0124.indd 64
2008-01-24 �� 6:35:00
Check/Remedy
EnG
SYMPTOM
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles do
not work.
• Audio language and subtitles will not work if the disc does
not contain them.
Menu screen does not appear
even when the menu function is
selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER
BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be
seen in 4:3 ratio only. Refer to the DVD disc jacket and then
select the appropriate function.
• The main unit is not working.
(Example: The power goes out
or strange noise is heard.)
• The DVD player is not working
normally.
• Turn off the power and hold the STOP (T) button on the
main unit for longer than 5 seconds reset function).
The password for rating level has
been forgotten.
● troubleshooting
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main
unit, hold the main unit's STOP (T) button for longer than 5
seconds. “INITIAL” appears on the display and all settings will
return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
65
HT-Z410_XAA_0124.indd 65
2008-01-24 �� 6:35:00
USB host feature supported products
Digital Camera
Product
Company
Finepix-A340
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Finepix A310
KD-310Z
Finecam SL300R
Finecam SL400R
Finecam S5R
Finecam Xt
Dimage-Z1
Dimage Z1
Dimage X21
Coolpix4200
Coolpix4300
Coolpix 2200
Coolpix 3500
Coolpix 3700
Coolpix 4100
Coolpix 5200
Stylus 410 digital
300-digital
300-digital
Fuji
Fuji
Fuji
Fuji
Fuji
Fuji
Konica
Kyocera
Kyocera
Kyocera
Kyocera
Minolta
Minolta
Minolta
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Olympus
Olympus
Olympus
Type
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Product
U300
X-350
C-760
C-5060
X1
U-mini
Lumix-FZ20
DMC-FX7GD
Lumix LC33
LUMIX DMC-F1
Optio-S40
Optio-S50
Optio 33LF
Optio MX
Digimax-420
Digimax-400
Sora PDR-T30
Coolpix 5900
Coolpix S1
Coolpix 7600
DMC-FX7
Dimage Xt
AZ-1
Company
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Panasonic
Panasonic
Panasonic
Panasonic
Pentax
Pentax
Pentax
Pentax
Samsung
Samsung
Toshiba
Nikon
Nikon
Nikon
Panasonic
Minolta
Olympus
Type
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
USB Flash Disc
Product
Company
Cruzer Micro
Cruzer Mini Cruzer Mini SONY Micro Vault
FLEX DRIVE
AnyDrive
Sandisk
Sandisk
Sandisk
Sony
Serotech
A.L tech
Type
USB 2.0 USB Flash Drive 128M
USB 2.0 128M
USB 2.0 256M
USB 2.0 64MB
USB 2.0 32MB
USB 2.0 128MB
Product
XTICK
Micro Mini
iFlash
LG
RiDATA
Company
LG
Iomega
Imation
XTICK(M)
EZDrive
Type
USB 2.0 128M
USB 2.0 128M
USB 2.0 64M
USB 2.0 64M
USB 2.0 64M
MP3 Player
Product
Creative MuVo NX128M
Iriver H320
YH-920
YP-T7
YP-MT6
YP-T6
YP-T9
YP-ST5
YP-T5
YP-K5
Company
Type
Creative 128 MB MP3 Player
Iriver
20G HDD MP3 Player
Samsung 20G HDD MP3 Player
Samsung
MP3 Player
Samsung
MP3 Player
Samsung
MP3 Player
Samsung
MP3 Player
Samsung
MP3 Player
Samsung
MP3 Player
Samsung
MP3 Player
Product
YP-K3
YP-U3
YP-Z5F
iAUDIO U2
iAUDIO G3
iAudio M3
SI-M500L
H10
YP-T10
YP-P2
Company
Type
Samsung
Samsung
Samsung
Cowon
Cowon
Cowon
Sharp
Iriver
Samsung
Samsung
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
HDD MP3 Player
256MB MP3 Player
MP3 Player
MP3 Player
MP3 Player
66
HT-Z410_XAA_0124.indd 66
2008-01-24 �� 6:35:00
EnG
appendix
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
● appendix
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Do not keep in direct sunlight
M`
Keep in a cool
ventilated area
Keep in a clean Protection jacket.
Store vertically.
Do not allow the discs to become contaminated with dirt.
` Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with
a soft cloth.
~ When cleaning, wipe gently from the inside to the outside of the disc
M`
Condensation may form if warm air comes into contact with cold parts inside the player.
When condensation forms inside the player, the player may not operate correctly. If this
occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.
67
HT-Z410_XAA_0124.indd 67
2008-01-24 �� 6:35:00
appendix
Specifications
General
Power Requirements
Power Consumption
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD (Digital Versatile Disc)
Disc
CD : 5 inches (COMPACT DISC)
CD : 3 1/2 inches (COMPACT DISC)
Composite Video
Video Output
Component Video
Video/Audio
Amplifier
HDMI
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
AC 120V, 60Hz
90 W
11.5 Ibs
16.9 (W) x 17.3 (H) x 2.9 (D) inches
+41°F to +95°F
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
480i
1 channel : 1.0 Vp-p (75 Ω load)
480i
Y : 1.0 Vp-p (75 load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
1080p, 1080i, 720p, 480p
166W x 2(3Ω)
170W(3Ω)
166W x 2(3Ω)
166W(3Ω)
20Hz~20KHz
70dB
60dB
(AUX)400mV
5.1ch speaker system
Front/Rear
Center
Subwoofer
3Ω
3Ω
3Ω
140Hz~20KHz
140Hz~20KHz
45Hz~160Hz
86dB/W/M
86dB/W/M
86dB/W/M
166W
170W
166W
332W
340W
Front/Rear : 3.5 x 5.4 x 3.6 inches
Center : 11.8 x 4.0 x 3.6 inches
Subwoofer : 7.1 x 12.6 x 15.0 inches
332W
Front/Rear : 1.3 Ibs, Center : 2.1 Ibs Subwoofer : 9.9 Ibs
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
68
HT-Z410_XAA_0124.indd 68
2008-01-24 �� 6:35:01
EnG
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new,
in the originalcarton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty
service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon
request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from
the service center is the responsibility of the purchaser.
● appendix
(*90 Days Parts and Labor for Commercial Use)
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent
otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including,
but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not
intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or
other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations,
repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service
problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,
cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal
or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery
problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE,
AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO
THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS,
FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH
THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL
RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT
SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES
ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT
CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
1-800-SAMSUNG (726-7864) and www.samsung.com/us
69
HT-Z410_XAA_0124.indd 69
2008-01-24 �� 6:35:01
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care center.
Region
North America
Latin America
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
NICARAGUA
HONDURAS
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
Europe
CIS
Asia Pacific
Middle East &
Africa
Ht-Z410_XAA_0124.indd 70
Customer Care Center 
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421 , 4004-0000
800-SAMSUNG(726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
01-8000112112
0032 (0)2 201 24 18
844 000 844
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka
Vyskočilova 4, 14000 Praha 4
70 70 19 70
030-6227 515
3260 SAMSUNG ( 0,15/Min),
08 25 08 65 65 ( 0,15/Min)
Web Site
www.samsung.com/ca
www.samsung.com
www.samsung.com
www.samsung.com/ar
www.samsung.com
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
EIRE
AUSTRIA
SWITZERLAND
RUSSIA
KAZAHSTAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
UKRAINE
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
TURKEY
01805 - SAMSUNG(726-7864) (
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
0035 (0)2 261 03 710
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
www.samsung.com
U.A.E
800-SAMSUNG (726-7864), 8000-4726
www.samsung.com
0,14/Min)
0900-SAMSUNG(726-7864) ( 0,10/Min)
815-56 480
0 801 801 881 , 022-607-93-33
80820-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
902 10 11 30
0771-400 200
0845 SAMSUNG (7267864)
0818 717 100
0800-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
8-800-555-55-55
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
8-800-502-0000
8-800-77777
800-7267
800-7267
1300 362 603
0800SAMSUNG(726-7864)
800-810-5858 , 010-6475 1880
3698-4698
3030 8282 , 1800 110011
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232 , 02-689-3232
0800-329-999
1 800 588 889
444 77 11
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/be
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com
www.samsung.com/se
www.samsung.com
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.com
www.samsung.kz
www.samsung.uz
www.samsung.com
www.samsung.lt
www.samsung.com/lv
www.samsung.ee
www.samsung.com
www.samsung.com/nz
www.samsung.com
www.samsung.com/hk
www.samsung.com
www.samsung.com
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com
www.samsung.com
www.samsung.com/tw
www.samsung.com
www.samsung.com
2008-01-24 �� 6:35:01