Electrolux FHWC3660LSA Use & care guide

Use & care guide
Guia de uso y cuidado
Guide d’utilisation et d’entretien
30” and 36” Range Hood
FHWC3060LSA + FHWC3660LSA
00-Elux FHWC3060LSA-Range hood-Book-01.indd 1
316902443 Rev A February 2012
6/16/11
13:49 PM
2
Finding information
Table of contents
Please read and save this guide ....................................... 02
Keep a record for quick reference .................................... 02
Important safety instructions.......................................02-04
NOTE
Registering your product with Frigidaire enhances
our ability to serve you. You can register online at
www.frigidaire.com or by dropping your Product
Registration Card in the mail.
Electrical requirements...................................................... 04
Questions?
Intended use....................................................................... 05
For toll-free telephone support in the U.S.: 1-800944-9044 or Canada: 1-800-265-8352
Parts supplied..................................................................... 05
Installing the hood.........................................................06-10
For online support and Internet production
information visit http://www.frigidaire.com
Operation............................................................................ 11
Important safety instructions
Cleaning and maintenance...........................................11-12
•
Troubleshooting.................................................................. 12
Do not attempt to install or operate this appliance
until you have read the safety instructions in this
manual. Safety items throughout this manual are
labelled with a Danger, Warning, or Caution based
on the risk type.
Environmental protection................................................... 12
Definitions
Warranty information......................................................... 13
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
Technical data..................................................................... 12
Please read and save this guide
Thank you for choosing Frigidaire, the new premium
brand in home appliances. This Use & Care Guide
is part of our commitment to customer satisfaction
and product quality throughout the service life of
your new appliance.
We view your purchase as the beginning of a
relationship. To ensure our ability to continue serving
you, please use this page to record important
product information.
Keep a record for quick reference
DANGER
DANGER indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
Purchase date
CAUTION
Model number
CAUTION indicates a potentially hazardous
situation which, if not avoided, could result in
minor or moderate injury.
Serial number
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 2
•
12/8/10 12:43 PM
e
e
l
Important safety instructions
Important safety instructions
IMPORTANT
Indicates installation, operation, or
maintenance information which is important
but not hazard-related.
Child safety
Packing materials:
• Packing cartons covered with rugs, bedspreads,
plastic sheets, or stretch wrap may become
airtight chambers and can quickly cause
suffocation.
• Remove the protective film covering
the appliance before putting it into
operation.
• Destroy or recycle the appliance’s
carton, plastic bags, and any other exterior
wrapping material immediately after the product
is unpacked. Children should never play with
these items. Danger of suffocation!
IMPORTANT
PLEASE READ THESE INSTRUCTIONS
CAREFULLY BEFORE INSTALLATION AND
USE.
INSTALLATION MUST COMPLY WITH ALL
LOCAL CODES.
IMPORTANT: Save these instructions for the
Local Electrical Inspector’s use.
INSTALLER: Please leave these instructions with
this appliance for the owner.
OWNER: Please retain these instructions for
future reference.
DANGER
Always switch off the electricity supply at the
mains during installation and maintenance
such as for light bulb replacement.
3
WARNING
To reduce the risk of fire, electric shock, or
injury to persons, observe the following:
• FOR RESIDENTIAL USE ONLY.
• Use this appliance only in the manner
intended by the manufacturer. If you have
questions, contact the manufacturer.
• Installation work and electrical wiring must
be done by qualified person(s) in accordance
with a ll applicable codes & standards,
including fire-rated construction.
• Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel burning
equipment to prevent back-drafting. Follow
the heating equipment manufacturers
guideline and safety standards such
as those published by the National Fire
Protection
Association
(NFPA),
the
American Society for Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE),
and the local code authorities.
• When cutting or drilling into wall or ceiling,
do not damage electrical wiring and other
hidden utilities (e.g. gas pipes).
• Ducted systems must always be vented to
the outdoors.
WARNING
• Before servicing or cleaning the unit, switch
power off at service panel and lock service
panel disconnecting means to prevent
power from being switched on accidentally.
When the service disconnecting means
cannot be locked, securely fasten a
prominent warning device, such as a tag,
to the service panel.
CAUTION
For general ventilating use only. DO NOT use to
exhaust hazardous or explosive materials or vapors.
CAUTION
To reduce risk of fire and to properly exhaust
air, be sure to duct air outside – do not vent
exhaust air into spaces within walls, ceilings,
attics, crawl spaces, or garages.
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 3
12/8/10 12:43 PM
4
Important safety instructions
Important safety instructions
WARNING
To reduce the risk of fire, use only metal duct
work. Install this hood in accordance with all
requirements specified.
WARNING
To reduce the risk of fire or electric shock, do
not use this hood with any external solid state
speed control device.
WARNING
To reduce the risk of a cooker top grease fire:
• Never leave surface units unattended at
high settings. Boilovers cause smoking
and greasy spillovers that may ignite. Heat
oils slowly on low or medium settings.
• Always turn hood ON when cooking at high
heat or when flambéing food (i.e. Crepes
Suzette, Cherries Jubilee, Peppercorn
Beef Flambé).
WARNING
• Clean ventilating fans frequently. Grease
should not be allowed to accumulate on
fan or filter.
• Do not use the range hood without
the grease filters, or if the filters are
excessively greasy.
• Use proper pan size. Always use cookware
appropriate for the size of the surface
element.
WARNING
NEVER PICK UP A FLAMING PAN - you may
be burned.
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 4
WARNING
To reduce the risk of injury to persons, in the
event of a cooker top grease fire, observe the
following:
• Smother flames with a close-fitting lid,
cookie sheet, or other metal tray, then turn
off the gas burner or the electric element.
Be careful to prevent burns. If the flames
do not go out immediately, evacuate and
call the fire department.
• Never pick up a flaming pan – you may be
burned.
• Do not use water, including wet dishcloths
or towels – a violent steam explosion will
result.
• Use an extinguisher only if:
- You know you have a class ABC
extinguisher, and you already know
how to operate it.
- The fire is small and contained in the
area where it started.
- The fire department is being called.
- You can fight the fire with your back to
an exit.
CAUTION
Always leave safety grills and filters in place.
Without these components, operating blowers
could catch onto hair, fingers and loose
clothing.
Electrical requirements
IMPORTANT
Observe all governing codes and ordinances.
It is the customer’s responsibility:
• to contact a qualified electrical installer.
• to assure that the electrical installation is
adequate and in conformance with National
Electrical Code, ANSI/NFPA 70 – latest edition*,
or CSA Standards C22.1-94, Canadian Electrical
Code, Part 1 and C22.2 No.0-M91-latest edition**
and all local codes and ordinances.
If codes permit and a separate ground wire is
used, it is recommended that a qualified electrician
determines that the ground path is adequate.
• Do not ground to a gas pipe.
• Check with a qualified electrician if you are not
sure range hood is properly grounded.
12/8/10 12:43 PM
Installing the hood
• Do not have a fuse in the neutral or ground
circuit.
3
Upper and lower
chimney
1
+
1
4
Upper bracket
1
5
Lower bracket
1
6
Collar
1
7
Recirculation kit
(optional
accessories)
-FHWRKT60LS
1
8
Bulb
20W, 120V~, GU10
(pre-assembled)
2
9
Bolt, rubber
washer, washer
4
sets
10
Long screw
(4mm x 32mm)
8
11
Wall plug
8
12
Short screw
(4mm x 12mm)
4
13
Allen key
1
14
Wood screw
(4mm x 50mm)
Short screw
(3.5mmx8mm)
4
15
Short screw
(3.5mmx8mm)
2
16
10’ extension
chimney kit
(optional
accessories)
FHW10X60LS
1
Assembly template
(stencilled)
1
IMPORTANT
Save installation instructions for electrical
inspector’s use.
The range hood must be connected with copper
wire only.
The range hood should be connected directly
to the fused disconnect (or circuit breaker) box
through metal electrical conduit.
Wire sizes must conform to the requirements of
the National Electrical Code ANSI/NFPA 70 – latest
edition”, or CSA Standards C22.1-94, Canadian
Electrical Code Part 1 and C22.2 No.0-M91 – latest
edition** and all local codes and ordinances.
A U.L.- or C.S.A.-listed conduit connector must be
provided at each end of the power supply conduit (at
the range hood and at the junction box).
Copies of the standards listed may be obtained
from:
* National Fire Protection Association Batterymarch
Park Quincy, Massachusetts 02269
** CSA International 8501 East Pleasant Valley Road
Cleveland, Ohio 44131-5575
Power requirement:
120V~, 60Hz, 15 or 20A branch circuit
Intended use
• Your range hood is intended for exhaust operation
only. This range hood is not recommended to be
used over indoor grills. Do not use it to exhaust
hazardous or explosive materials or vapors.
Parts supplied
No. Part
Qty.
l
,
1
Range hood
1
2
Glass cover
1
17
Template
(stencilled)
5
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 5
12/8/10 12:43 PM
6
Installing the hood
Installing the hood
•
•
IMPORTANT
•
We recommend that two people carry
out the installation. Pay attention to the
procedure described in the assembly
instructions.

•
Preparation
•
•
•
•
Determine the exact location of the range hood.
Plan the route for venting exhaust to the outdoors
).
Plan the power connection prior to installation so
that electrical wiring will not be visible afterwards.
House wiring location: The junction box is
located on the top right side of the hood. Wiring
should enter the back wall at least 20” above
the bottom of the installation height, and within
3-3/8” to 4-3/4” of the right side of the centerline
/ ).
If open
are operated in the same room,
ask your local chimney sweeper about the local
regulations prior to installation.
If you are renting, then approval must be obtained
from the owner of the property.
Attention! In order for the range hood to reach
optimal performance, install it over the middle of
the cooking area.
The following accessories are required to mount
the range hood (not included):
Exhaust duct
Power drill with 3/16” and 1/8” bits
Screwdriver
Level
Cable detector
Measuring tape
Duct tape
fig.
8 to 9
ft
fig.
Installation
height
Center line
6
36”
Ducting installation guidelines
•
•
•
GB
Use the shortest and straightest duct route
possible.
The wall breakthrough must be carried
out by a professional prior to installing the
range hood. Pay attention to the length of
the exhaust hose when planning the wall
breakthrough. The exhaust hose must reach
the outer edge of the wall without any kinks.
Important! If the exhaust hose leads through an
outer wall, install a wall cap with damper or roof
cap at the exterior opening (not delivered). This
can be installed by the professional that performs
the wall breakthrough.
00-Elux FHWC3060LSA-Range hood-Book-01.indd
6
•
•
•
•
•
•
For safety reasons, ducting should vent directly
outdoors (not into an attic, underneath the house,
into the garage or into any enclosed space).
Keep duct runs as short and straight as possible.
Duct
(elbows and transitions) reduce air
•
Back to back elbow and “S” turns give very poor
delivery and are not recommended.
A short straight length of duct at the inlet of the
remote blower gives the best delivery.
Transition to duct from the integral blower or
remote duct transition as close to the downdraft
as is possible.
Use a suitable 6” round duct.
12/8/10
12:43 PM
.
r
Installing the hood
• Flexible metal round ducts should only be used
when no other duct fitting exists. Limit use to
short lengths and do not crush when making
corners.
7
fig.
Examples of possible ducting or air
recirculation
fig.
Roof pitch with
flashing and cap
Pipe
Collar
Sidewall cap
Pipe
Collar
Recirculator
Pipe
Collar
IMPORTANT
Framing must be capable of supporting 100 lbs.
Installing range hood to the wall
(Exhaust operation)
IMPORTANT
This range hood is very heavy. Adequate structure
and support must be provided in all types of
installations.
Install framing for hood support
• If drywall is present, mark the screw hole
locations.
• Cut away enough drywall to expose 2 vertical
studs at the holes location indicated by the
template. Install two horizontal supports at least
1” x 6” between two wall studs at the bottom and
top mounting holes installation location (fig. ).
• The horizontal support must be flush with the
room side of the studs. Use cleats behind both
sides of the support to secure to wall studs.
• Reinstall drywall and refinish.
Step 1:
• Make sure that no cables or pipes will become
damaged (e.g. electric, gas, water; test the areas
in question with a cable detector).
• Using supplied template (17), mark and drill 8
holes in the wall. Drill the holes according to the
measured distances from the diagram (fig. ).
• Upper/Lower bracket (4, 5): Insert 4 wall plugs
(11) into the 4 drilled holes.
• Range hood (1): Installation is depending on wall
type:
Wall type
Required fasteners
Wood
No wall plugs (11)
required
Brick/Concrete
4 wall plugs (11)
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 7
12/8/10 12:43 PM
8
Installing the hood
• Insert 2 screws (10 or 14) in the top location, but
do not fully insert the screws (fig. ). Mount the
range hood (1) to the wall and tighten the screws.
Insert and tighten the 2 remaining screws on the
bottom location of the range hood (fig. / ).
• Attach the collar (6) to the range hood (1). Secure
with 2 short screws (12) (fig. ).
fig.
Ceiling
0.9”
Long
screws
9.8”
9.3”
9.13”
Wood
screws
fig.
9.8”
7.5”
10”
Dimension
A
(see table)
Wall
fig.
0.08”
fig.
fig.
0.08”
Desired range hood distance above a
36” high cook top
Ceiling height
8 Feet
9 Feet
10 Feet *1
A*2
A*2
A*2
26”*
28-3/32”
27”*
29-3/32”
28”*
30-3/32”
3
29”*
31-3/32”
31-3/32”
31-3/32”
30”*3
32-3/32”
32-3/32”
32-3/32”
31”*
3
33-3/32”
33-3/32”
33-3/32”
32”*3
34-3/32”
34-3/32”
34-3/32”
33”
35-3/32”
35-3/32”
34”
36-3/32”
36-3/32”
35”
37-3/32”
37-3/32”
3
3
3
30-3/32”
*1: with 10’ extension chimney kit FHW10X60LS
(16) (not supplied). Please call Frigidaire at
1.800.944.9044 to order this kit.
*2: “Dimension A” in the chart represents the height
from cook top to where the bottom screw mounting
holes would be located.
*3: Recommended mounting height
Step 2:
• Install the range hood (1) either with wood screws
or long screws, depending on the wall type:
Wall type
Required screws
Wood
4 wood screws (14)
Brick/Concrete
4 long screws (10)
NOTE
Sometimes, sponge tape covers the holes. If the
holes are located behind the sponge tape, simply
insert the screw through the sponge tape.
Step 3:
• Mount the glass cover (2) onto the range hood
(1). Use the allen key (13) to secure with 4 sets of
bolts, rubber washers, and washers (9) (fig. ).
fig.
Step 4:
• Mount upper and lower brackets (4, 5) on the
wall. Secure with the remaining 4 sets of long
screws (10). The notches of the lower bracket
should be facing up towards the ceiling (fig. ).
• Attach the exhaust duct (fig. ).
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 8
12/8/10 12:43 PM
t
e
.
e
Installing the hood
fig.
fig.
fig.
fig.
L (live) = Black N (neutral) = White
(ground) = Green
L
e
d
f
9
N
• Mount the junction box onto the range hood
using 2 short screws (15) (fig. ).
Electrical connections
fig.
DANGER
Danger of electric shock! All fittings must be
installed by a competent person in accordance
with current wiring regulations and local
building regulations. If in doubt, consult a
qualified electrician.
IMPORTANT
Always switch off the electricity supply at
the mains during installation, cleaning and
maintenance. We recommend that the fuse is
withdrawn or circuit breaker switched off at the
distribution board while work is in progress.
Step 5:
• Loosen the 2 short screws from the junction box
(fig. ).
fig.
e
g
t
Step 6:
• Insert the upper chimney (3) into the lower chimney
(3) from top to bottom (fig. ).
• Mount upper and lower chimney (3) on the range
hood (1). Fit the tab, which is bend by 90 degrees,
into the lower bracket notch and mount to the lower
bracket (5) (fig. / ).
• Pull the upper chimney (3) to the upward position to
match the screw hole of the upper bracket. Mount to
the upper bracket (4) with 2 side screws (12) (fig. ).
fig.
fig.
fig.
fig.
• Connect the incoming positive, neutral and
ground cables to the respective terminals. The
ground cable is already pre-assembled onto the
junction box to provide grounding (fig. ).
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 9
12/8/10 12:43 PM
10 Installing the hood
CAUTION
Danger of injury. The chimney skirts may have
some sharp edges.
Exhaust operation
• During exhaust operation, the range hood
removes air from a room. If other fire sources
that require the surrounding air for combustion
are being operated in the same room, (e.g. gas,
oil or coal heaters), the oxygen they require is
taken away. Thus flames could be suffocated
and gas could leak out or the fumes could be
drawn back into the room.
• In order to guarantee a safe operation, there
should be non-closable openings in doors,
windows to ensure a fresh supply of combustion
air. This will prevent the combustion fumes from
being drawn back into the room.
• When assessing the measures necessary, always
take the entire ventilation system of the house
into consideration.
• Never secure the range hood to a ventilation
duct, or a room or exhaust gas chimney! Do
not let the air that is removed from the room be
drawn into a duct where warm air is circulating.
The extracted air should only be drawn outdoors
through a separate ventilating duct that is only
for the extractor hood.
• When in extraction mode, air in the room is
being removed by the range hood. Please make
sure that proper ventilation measures are being
observed. The range hood removes odors from
room but not steam.
• There shall be adequate ventilation of the room
when the range hood is used at the same time
as appliances burning gas or other fuels (not
applicable to appliances that only discharge the
air back into the room).
• The air must not be discharged into a flue that
is used for exhausting fumes from appliances
burning gas or other fuels (not applicable to
appliances that only discharge the air back into
the room).
Installing range hood to the wall in
recirculation mode
• For the operation of the range hood with
recirculation mode a recirculator, model no.
FHWRKT60LS, needs to be obtained. Please call
Frigidaire at 1.800.944.9044 to order this kit.
• Follow steps 1 to 4 from Fixing range hood to the
wall (with exhaust ducting) chapter.
• To install the recirculator (7), use the template
included in recirculation kit for proper position.
• Place the recirculator (7) against the upper bracket
(4) by using the upper holes with upper bracket in
the wall.
• Fix the recirculator (7) to the wall with 2 sets of long
screws (10) and wall plugs (11) (fig. ).
• Attach the exhaust duct on the bottom of the
recirculator (7).
• Follow steps 5 to 6 from Fixing range hood to the
wall (with exhaust ducting) sub-chapter.
fig.
Upper
bracket
Recirculator
Wall
Lower
screw holes
Lower bracket
fig.
Air recirculation operation
• Recirculated air: Kitchen fumes are removed
and after purification are fed back into the
room through the upper ventilation openings.
The purification takes place via metallic antigrease filter. No wall breakthrough is required for
recirculated air operation.
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 10
• Take out the grease filters and fit charcoal filters
to two lateral sides of the motor blower. Assemble
back the grease filters. (fig. ).
12/8/10 12:43 PM
e
e
t
n
e
e
s
e
Button
Function
o
Press button o to switch the appliance
off (pilot lamp is lit when appliance is
switched on).
•
Press button • for low speed.
••
Press button •• for medium speed.
•••
Press button ••• for high speed.
Press button
to turn on lights. Press
again to switch lights off.
Regularly
• Press one of the speed ( • / • • / • • • ) buttons
to turn the appliance on.
Monthly
l
Operation
For best performance
NOTE
Continuous use of range hood while cooking helps
keep the kitchen comfortable and less humid.
It also reduces cooking odors and soiling moisture
that create a frequent need for cleaning.
• Turn on the range hood before starting to cook.
• Clean the filters frequently (refer to Cleaning
and maintenance below).
• Use low speed for normal use and higher speed
for strong odors or fumes.
Cleaning and maintenance
Cleaning
DANGER
Always switch off the electricity supply at the mains
during installation, cleaning and maintenance such
as for light bulb replacement.
every 4 - 6 months
h
Operation / Cleaning and maintenance 11
Use a soft cloth moistened with hand-warm
mildly soapy water or household cleaning
detergent. Never use metal pads, chemical,
abrasive material or stiff brush to clean the
appliance.
Metallic anti-grease filter: The filter collects
grease, smoke and dust so the filter is directly
affecting the efficiency of the range hood. If
not cleaned, the grease residue (potential
flammable) will saturate on the filter. Clean it
with household cleaning detergent. The filter
is dishwasher safe.
Recirculator: clean the ventilation openings
on the top sides.
Charcoal filters:
• If the model is not vented to the outside, the
air will be recirculated through disposable
charcoal filters that help remove smoke
and odors.
• The charcoal filters cannot be cleaned, they
must be replaced regularly (depending on
range hood usage).
• NOTE: Do not rinse or put charcoal filters
in a dishwasher.
• NOTE: Charcoal filters are not included
with the range hood. Please call Frigidaire
at 1.800.944.9044 to order this kit. When
calling our customer service center, also
have this range hood’s model number
ready.
IMPORTANT
Clean the filter every month to prevent risk of fire.
Maintenance
• User servicing – Do not repair or replace
any part of the appliance unless specifically
recommended in the manual. All other servicing
should be referred to a qualified technician.
Light bulb replacement
NOTE
The efficiency of the range hood depends on the
cleanliness of the intake and filters. Grease should
not be allowed to accumulate on hood or filter.
• Clean the appliance in the following intervals:
• Switch the appliance off and disconnect the
power supply.
• In order to replace the light bulb (8), the metallic
anti-grease filter should be detached first.
• Pull the spring lock downward (fig. ).
• Rotate and pull one or both of the light bulbs from
the holders and replace with new light bulb(s) of
the same type (GU10, 20W, 120V~) (fig. / ).
• Replace the metallic anti-grease filter and make
sure it locks in place.
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 11
12/8/10 12:43 PM
12 Troubleshooting
fig.
fig.
Suction
performance
is not good.
fig.
Readjust the
distance (page
7, fig.
and
table below)
Metallic antigrease filter is
dirty.
Clean
filters (see
Cleaning and
maintenance).
120V~, 60Hz
520W
2x 20W, 120V~
(type: GU10)
18AWG
(Amer. Wire Gauge)
300V~, 105˚C
Excessive
vibration.
Both light and
fan do not
work.
6
7
8
Solution
The appliance
is not fixed
properly on the
brackets.
Take down
the appliance
and check it is
properly fixed.
9
Switch off the
appliance.
Repair to be
carried out by
qualified service
personnel only.
1
The fan blade
is damaged.
The fan blade
is jammed.
The motor is
damaged.
Light bulb
broken.
Replace with
a bulb with
correct rating.
Problem with
electrical
connection
Check the
electrical
connection with
an electrician.
1
1
1
U
1
E
N
1
C
GB
00-Elux FHWC3060LSA-Range hood-Book-01.indd 12
3
4
Cause
The fan motor
is not fixed
tightly.
Light on, but
fan does not
work.
2
5
Troubleshooting
Problem
Y
w
p
o
t
s
a
T
1
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer
for recycling advice.
Technical data
W
E
Environmental protection
fig.
Power supply
:
Power consumption :
Bulb type
:
Power cable type
:
Distance
between the
appliance and
the cooking
place too
large.
12/8/10 12:43 PM
t
.
.
Warranty information 13
Warranty information
DISCLAIMER OF IMPLIED WARRANTIES;
Your appliance is covered by a one year limited
warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing
or replacing any parts of this appliance that prove
to be defective in materials or workmanship when
such appliance is installed, used and maintained in
accordance with the provided instructions.
LIMITATION OF REMEDIES
Exclusions
This warranty does not cover the following:
1. Products with original serial numbers that have
been removed, altered or cannot be readily
determined.
2. Product that has been transferred from its original
owner to another party or removed outside the
USA or Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by
this warranty.
5. Food loss due to any refrigerator or freezer
failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction
or defects in materials or workmanship, or for
appliances not in ordinary household use or
used other than in accordance with the provided
instructions.
8. Service calls to correct the installation of your
appliance or to instruct you how to use your
appliance.
9. Expenses for making the appliance accessible
for servicing, such as removal of trim, cupboards,
shelves, etc., which are not a part of the appliance
when it is shipped from the factory.
10.Service calls to repair or replace appliance light
bulbs, air filters, water filters, other consumables,
or knobs, handles, or other cosmetic parts.
11.Surcharges including, but not limited to, any
after hour, weekend, or holiday service calls,
tolls, ferry trip charges, or mileage expense for
service calls to remote areas, including the state
of Alaska.
12.Damages to the finish of appliance or home
incurred during installation, including but not
limited to floors, cabinets, walls, etc.
13.Damages caused by: services performed by
unauthorized service companies; use of parts
other than genuine Electrolux parts or parts
obtained from persons other than authorized
service companies; or external causes such
as abuse, misuse, inadequate power supply,
accidents, fires, or acts of God.
USA
1.800.944.9044
Electrolux Major Appliances
North America
10200 David Taylor Drive
Charlotte, NC 28262
00-Elux FHWC3060LSA-Range hood-Book-01.indd 13
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY
UNDER THIS LIMITED WARRANTY SHALL BE
PRODUCT REPAIR OR REPLACEMENT AS
PROVIDED HEREIN. CLAIMS BASED ON IMPLIED
WARRANTIES,
INCLUDING
WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE
YEAR OR THE SHORTEST PERIOD ALLOWED
BY LAW, BUT NOT LESS THAN ONE YEAR.
ELECTROLUX SHALL NOT BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES
SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH
OF THIS WRITTEN LIMITED WARRANTY OR
ANY IMPLIED WARRANTY. SOME STATES AND
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION
OF IMPLIED WARRANTIES, SO THESE LIMITATIONS
OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS
WRITTEN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
If You Need Service
Keep your receipt, delivery slip, or some other
appropriate payment record to establish the warranty
period should service be required. If service is
performed, it is in your best interest to obtain and
keep all receipts. Service under this warranty must be
obtained by contacting Electrolux at the addresses or
phone numbers below.
This warranty only applies in the USA and Canada. In
the USA, your appliance is warranted by Electrolux
Major Appliances North America, a division of Electrolux
Home Products, Inc. In Canada, your appliance is
warranted by Electrolux Canada Corp.
Electrolux authorizes no person to change or add to any
obligations under this warranty. Obligations for service
and parts under this warranty must be performed by
Electrolux or an authorized service company. Product
features or specifications as described or illustrated
are subject to change without notice.
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
GB
12/8/10 12:43 PM