Electrolux ESI User manual

user manual
Downloaded from DishWasher-Manual.com Manuals
ESI 65010
We were thinking of you
when we made this product
Downloaded from DishWasher-Manual.com Manuals
welcome to the world of Electrolux electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which
hopefully will provide you with lots of pleasure in the future. The
Electrolux ambition is to offer a wide variety of quality products
that make your life more comfortable. You find some examples on
the cover in this manual. Please take a few minutes to study this
manual so that you can take advantage of the benefits of your new
machine. We promise that it will provide a superior User
Experience delivering Ease-of-Mind. Good luck!
117991 68/0
Downloaded from DishWasher-Manual.com Manuals
4 electrolux contents
Safety information
Product description
Control panel
First use
Daily use
Washing programmes
Care and cleaning
Something not working
Technical data
Hints for test institutes
Environment concerns
Guarantee/Customer Service
The following symbols are used in this manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
General information and tips
Environmental information
Downloaded from DishWasher-Manual.com Manuals
safety information electrolux 5
Safety information
In the interest of your safety and to
ensure the correct use, before
installing and first using the
appliance, read this user manual
carefully, including its hints and
warnings. To avoid unnecessary
mistakes and accidents, it is
important to ensure that all people
using the appliance are thoroughly
familiar with its operation and
safety features. Save these
instructions and make sure that
they remain with the appliance if it
is moved or sold, so that everyone
using it through its life will be
properly informed on appliance use
and safety.
Correct use
This dishwasher is only intended
for washing household utensils
suitable for machine washing.
Do not put any solvents in the
dishwasher. This could cause an
Knives and other items with sharp
points must be loaded in the
cutlery basket with their points
down or placed in a horizontal
position in the upper basket.
Only use products (detergent, salt
and rinse aid) suitable for
Avoid opening the door whilst the
appliance is in operation, hot
steam may escape.
Do not take any dishes out of the
dishwasher before the end of the
dishwashing cycle.
After use, isolate the appliance
from the power supply and turn off
the water supply.
This product should be serviced
only by an authorised service
engineer, and only genuine spare
parts should be used.
Under no circumstances should
you attempt to repair the machine
yourself. Repairs carried out by
inexperienced persons will cause
injury or serious malfunctioning.
Contact your local Service Force
Centre. Always insist on genuine
spare parts.
General safety
Dishwasher detergents can cause
chemical burns to eyes, mouth and
throat. Could endanger life!
Comply with the safety instructions
of the dishwasher detergent
The water in your dishwasher is
not for drinking. Detergent
residues may still be present in
your machine.
Ensure that the door of the
dishwasher is always closed when
it is not being loaded or unloaded.
In this way you will avoid anybody
tripping over the open door and
hurting themselves.
Do not sit or stand on the open
Downloaded from DishWasher-Manual.com Manuals
6 electrolux safety information
Child safety
This appliance is designed to be
operated by adults. Don’t allow
children to use the dishwasher
Keep all packaging well away from
children. There is risk of
Keep all detergents in a safe place
out of children’s reach.
Keep children well away from the
dishwasher when the door is open.
For electrical and water connection
carefully follow the instructions
given in specific paragraphs.
Check your dishwasher for any
transport damage. Never connect
a damaged machine. If your
dishwasher is damaged contact
your supplier.
All packaging must be removed
before use.
Any electrical and plumbing work
required to install this appliance
must be carried out by a qualified
and competent person.
For safety reasons it is dangerous
to alter the specifications or
attempt to modify this product in
any way.
Never use the dishwasher if the
electrical supply cable and water
hoses are damaged; or if the
control panel, work top or plinth
area are damaged such that the
inside of the appliance is freely
accessible. Contact your local
Service Force centre, in order to
avoid hazard.
All sides of the dishwasher must
never be drilled to prevent damage
to hydraulic and electric
from DishWasher-Manual.com Manuals
product description electrolux 7
Product description
1 Upper basket
2 Water hardness dial
3 Salt container
4 Detergent dispenser
5 Rinse aid dispenser
6 Rating plate
7 Filters
8 Lower spray arm
9 Upper spray arm
Downloaded from DishWasher-Manual.com Manuals
electrolux control panel
Control panel
1 On/Off button
2 Programme selection buttons
3 Delay start button
4 Programme button lights, digital
display and indicator lights
Downloaded from DishWasher-Manual.com Manuals
control panel electrolux 9
Indicator lights
Programme in progress
Illuminates when a washing programme is set
and remains illuminated for all the duration of
the washing programme.
Turns off when the washing programme has
End of programme
Illuminates when a washing programme has
ended. It also has added functions of visual
signalling as:
- the setting of the water softener,
- activation/deactivation of the rinse aid
- intervention of an alarm due to the
malfunction of the machine.
Multi-tab function
Indicates the activation/deactivation of the
"Multi-tab function" (see "Multi-tab function").
Illuminates when the special salt has run out.
Rinse aid
Illuminates when the rinse aid has run out.
The salt and rinse aid indicator
lights are never illuminated while a
washing programme is running
even if filling with salt and/or rinse
aid is necessary.
The salt indicator light on the
control panel can remain
illuminated for 2-6 hours after the
salt has been replenished,
assuming the dishwasher remains
switched on. If you are using salts
that take longer to dissolve then
this can take longer. The function
of the machine is not affected.
Downloaded from DishWasher-Manual.com Manuals
10 electrolux control panel
Setting mode
Always remember that when:
setting the water softener,
activating/deactivating the rinse aid
the appliance MUST be in setting
Press On/Off button, ALL
programme button lights are
illuminated and in the digital
display 3 horizontal lines are
visible = appliance in setting mode.
Press On/Off button, ONLY a
programme button light is
illuminated and in the digital
display 1 horizontal line is visible =
last performed or selected
programme still set.
In this case, to return to setting
mode, the programme has to be
To cancel a set programme or a
programme in progress
Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights will illuminate
and in the digital display 3 horizontal
lines appear. The programme has
been cancelled and the machine is
now in setting mode.
Downloaded from DishWasher-Manual.com Manuals
first use electrolux 11
First use
Before using your dishwasher for the
first time:
● Ensure that the electrical and
water connections comply with the
installation instructions
● Remove all packaging from inside
the appliance
● Set the water softener
● Pour 1 litre of water inside the salt
container and then fill with
dishwasher salt
● Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: "3 in 1", "4 in 1",
"5 in 1" etc... set the Multi-tab
function (see "Multi-tab function").
Set the water softener
The dishwasher is equipped with a
water softener designed to remove
minerals and salts from the water
supply, which would have a
detrimental or adverse effect on the
operation of the appliance.
The higher the content of these
minerals and salts, the harder your
water is.
Water hardness is measured in
equivalent scales, German degrees
(°dH), French degrees (°TH) and
mmol/l (millimol per litre - international
unit for the hardness of water).
The softener should be adjusted
according to the hardness of the
water in your area. Your local Water
Authority can advise you on the
hardness of the water in your area.
Adjusting the water
hardness setting
Water hardness
Use of
51 - 70
43 - 50
91 - 125
76 - 90
9,0 - 12,5
7,6 - 8,9
level 10
level 9
37 - 42
65 - 75
6,5 - 7,5
level 8
29 - 36
51 - 64
5,1 - 6,4
level 7
23 - 28
40 - 50
4,0 - 5,0
level 6
19 - 22
33 - 39
3,3 - 3,9
level 5
15 - 18
26 - 32
2,6 - 3,2
level 4
11 - 14
19 - 25
1,9 - 2,5
level 3
4 - 10
7 - 18
0,7 - 1,8
level 2
< 0,7
level 1
no *
* no salt is necessary
Downloaded from DishWasher-Manual.com Manuals
12 electrolux first use
The water softener must be set in
both ways: manually, using the water
hardness dial and electronically, using
some of the programme buttons on
the control panel
Setting manually
The dishwasher is factory set at
position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the
3. Turn the water hardness dial to
position 1 or 2 (see table).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at
level 5.
1. Press the On/Off button. The
dishwasher must be in setting
2. Press simultaneously and keep
pressed buttons 2 and 3, until the
lights of buttons 1, 2 and 3 start
3. Press button 1, the lights of
buttons 2 and 3 turn off while the
light of the button 1 goes on
flashing, at the same time the end
of programme indicator light
starts to flash.
The current level is indicated by
the number of flashes of the end
of programme indicator light (see
5 flashes, pause, 5 flashes, pause,
etc... = level 5
6 flashes, pause, 6 flashes, pause,
etc... = level 6
4. To change the level, press button
1. Each time the button is pressed
the level changes. (For the
selection of the new level see the
if the current level is 5, by pressing
button 1 once, level 6 is selected.
if the current level is 10, by
pressing button 1 once, level 1 is
5. To memorise the operation, switch
off the dishwasher by pressing the
On/Off button.
Downloaded from DishWasher-Manual.com Manuals
first use electrolux 13
Filling with dishwasher salt
Only use salt specifically designed for
use in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher,
especially table salt, will damage the
water softener.
Only fill with salt just before starting
one of the complete washing
This will prevent any grains of salt or
salty water, which may have been
spilt, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
4. Replace the cap making sure that
there is no trace of salt on the
screw thread or on the gasket.
5. Replace the cap tightly turning it
clockwise until it stops with a click.
Do not worry if water overflows from
the unit when filling with salt, this is
quite normal.
To fill:
1. Open the door, remove the lower
basket and unscrew the cap of the
salt container by turning it
2. Pour 1 litre of water inside the
container (this is necessary only
before filling with salt for the
first time).
3. Using the funnel provided, pour in
the salt until the container is full.
Downloaded from DishWasher-Manual.com Manuals
14 electrolux first use
Filling with rinse aid
Rinse aid ensures thorough rinsing,
and spot and streak free drying.
Rinse aid is automatically added
during the last rinse.
According to the finish and drying
results obtained, adjust the dose of
rinse aid by means of the 6 position
selector (position 1 minimum dosage,
position 6 maximum dosage).
1. Open the container by pressing
the release button (A).
The dose is factory set in position 4.
2. Add the rinse aid in the container.
The maximum level for filling is
indicated by "max".
Increase the dose if there are drops of
water or lime spots on the dishes after
Reduce it if there are sticky whitish
streaks on the dishes or a bluish film
on glassware or knife blades.
3. Ensure that the lid is closed after
every refill.
The dispenser holds about 110 ml of
rinse aid, which is sufficient for
between 16 and 40 dishwashing
cycles, depending upon the dosage
Clean up any rinse aid spilt during
filling with an absorbent cloth to
avoid excess foaming during the
next wash.
Only use branded rinse aid for
Never fill the rinse aid dispenser
with any other substances (e.g.
dishwasher cleaning agent, liquid
detergent). This would damage the
Downloaded from DishWasher-Manual.com Manuals
daily use electrolux 15
Daily use
Check if it’s necessary to refill with
dishwasher salt or rinse aid
Load cutlery and dishes into the
Fill with dishwasher detergent .
Select a wash programme suitable
for the cutlery and dishes.
Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any
object that can absorb water may not
be washed in the dishwasher.
- Lay small objects in the cutlery
Plastic items and pans with non
stick coatings have a tendency to
retain water drops; these items will
not dry as well as porcelain and
steel items.
Light items (plastic bowls etc.)
must be loaded in the upper
basket and arranged so they do
not move.
Before loading the dishes, you
- Remove all left over food and
- Soften remnants of burnt food in
When loading the dishes and
cutlery, please note:
- Dishes and cutlery must not
impede the rotation of the spray
arms .
- Load hollow items such as cups,
glasses, pans, etc. with the
opening downwards so that water
cannot collect in the container or
a deep base.
- Dishes and items of cutlery must
not lie inside one another, or
cover each other.
- To avoid damage to glasses, they
must not touch.
Downloaded from DishWasher-Manual.com Manuals
16 electrolux daily use
For washing in the dishwasher the following cutlery and dishes
are not suitable:
- Cutlery with wooden, horn, china or mother-ofpearls handles.
- Plastic items that are not heat resistant.
- Older cutlery with glued parts that are not
temperature resistant.
- Bonded cutlery items or dishes.
- Pewter or copper items.
- Lead crystal glass.
- Steel items prone to rusting.
- Wooden platters.
- Items made from synthetics fibres.
are of limited suitability:
- Only wash stoneware in the dishwasher if it is
specially marked as being dishwasher-safe by the
- Glazed patterns may fade if machine washed
- Silver and aluminium parts have a tendency to
discolour during washing: Residues, e.g. egg
white, egg yolk and mustard often cause
discolouring and staining on silver. Therefore
always clean left-overs from silver immediately, if
it is not to be washed straight after use.
Downloaded from DishWasher-Manual.com Manuals
daily use electrolux 17
Open the door and slide out the
baskets to load the dishes.
The lower basket
The lower basket is designed to take
saucepans, lids, plates, salad bowls,
cutlery etc.
Serving dishes and large lids should
be arranged around the edge of the
basket, ensuring that the spray arms
can turn freely.
The two rows of prongs on the lower
basket can be easily lowered to allow
you to load pots, pans and bowls.
Downloaded from DishWasher-Manual.com Manuals
18 electrolux daily use
The cutlery basket
To make loading of the cutlery basket
easier, lower the cutlery basket
handle (fig.2).
Long bladed knives stored in an
upright position are a potential
Long and/or sharp items of cutlery
such as carving knives must be
positioned horizontally in the upper
Take care when loading or
unloading sharp items such as
fig. 2
Forks and spoons should be placed in
the removable cutlery basket with the
handles facing downwards and the
knives with their handles facing
upwards (fig.1).
fig. 1
For best results we recommend you
to use the cutlery grids.
If the size and dimensions of the cutlery
do not allow the use of the grids, they
can be easily hidden (fig. 3).
fig. 3
If the handles protrude from the
bottom of the basket, obstructing the
lower spray arm, load the cutlery with
the handles facing upwards.
Mix spoons with other cutlery to
prevent them from sticking together.
Downloaded from DishWasher-Manual.com Manuals
daily use electrolux 19
The cutlery basket is in two parts
which can be separated to give
greater loading flexibility. To separate
the two parts, slide them horizontally
in opposite directions and pull them
apart (fig. 4).
fig. 4
To reassemble, reverse the
Downloaded from DishWasher-Manual.com Manuals
20 electrolux daily use
The upper basket
The upper basket is designed for
saucers, salad bowls, cups, glasses,
pots and lids.
Arrange items on and underneath the
cup racks so that water can reach all
For glasses with long stems
(according to the size and
dimensions), set the glass holder to
the left or right position.
Glasses with long stems can be
placed upside down in the cup racks.
For taller items, the cup racks can be
folded upwards.
Before closing the door, ensure that
the spray arms can rotate freely.
Downloaded from DishWasher-Manual.com Manuals
daily use electrolux 21
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving
the upper basket to the higher position.
Maximum height of the dishes in the lower basket
With upper basket raised
31 cm
With upper basket lowered
27 cm
To move to the higher position
proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards
until the mechanism is engaged
and the basket is stable.
Never lift or lower the basket on
one side only
When the basket is in the higher
position you will not be able to use
the cup racks.
After loading your machine always
close the door, as an open door can
be a hazard.
To lower the basket to the original
position proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards
and then allow the mechanism to
drop back down slowly, keeping
hold of it.
Downloaded from DishWasher-Manual.com Manuals
22 electrolux daily use
Use of detergent
20 = approximately 20 g of
30 = approximately 30 g of
Only use detergents specifically
designed for use in dishwashers.
Please observe the manufacturer’s
dosing and storage recommendations
as stated on the detergent packaging.
3. All programmes with prewash
need an additional detergent dose
(5/10 g) that must be placed in the
prewash detergent chamber (2).
This detergent will take effect
during the prewash phase.
When using detergent tablets;
place the tablet in compartment (1)
Using no more than the correct
amount of detergent contributes to
reducing pollution.
Fill with detergent
1. Open the lid.
4. Close the lid and press until it
locks in place.
2. Fill the detergent dispenser (1)
with detergent. The marking
indicates the dosing levels:
Detergent tablets
Detergent tablets from different
manufactures dissolve at different
rates. For this reason, some detergent
tablets do not attain their full cleaning
power during short washing
programmes. Therefore, please use
long washing programmes when
using detergent tablets, to ensure the
complete removal of detergent
Downloaded from DishWasher-Manual.com Manuals
daily use electrolux 23
"Multi-tab function"
This appliance is equipped with the
"Multi-tab function", that allows the
use of combi detergent tablets.
These products are detergents with a
combined cleaning, rinsing and salt
functions. They can also contain other
different agents depending on which
kind of tablets you choose ("3 in 1", "4
in 1", "5 in 1" etc...)
Check whether these detergents are
suitable for your water hardness. See
the manufacturers instructions.
Once this function is selected it will
remain active also for the following
washing programmes.
With the selection of this function the
inflow of rinse aid and salt from each
respective supply container is
automatically deactivated and also the
indicator lights for salt and rinse aid
are deactivated.
Select the "Multi-tab function" before
the start of a washing programme.
With the use of the "Multi-tab
function", the cycle durations may
Once the programme is running, the
"Multi-tab function" can NO longer be
changed. If you want to exclude the
"Multi-tab function" you have to cancel
the programme setting and then
deactivate the "Multi-tab function".
In this case you have to set a
washing programme (and desired
options) again.
Activation/deactivation of the Multitab function
Simultaneously press and hold the
two buttons positioned over the Multitab symbol, until the "Multi-tab
function "indicator light illuminates.
This means that the function is active.
To deactivate the function press the
same buttons again until the "Multitab" indicator light turns off.
If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to
position 2.
The activation/deactivation of the
rinse aid dispenser can only be
possible with the "Multi-tab
function" active.
Downloaded from DishWasher-Manual.com Manuals
24 electrolux daily use
Activation/deactivation of the rinse
aid dispenser
1. Press the On/Off button. The
dishwasher must be in setting
2. Press simultaneously buttons 2
and 3, until the lights of buttons 1,
2, and 3 start flashing.
If you decide to turn back to the
use of standard detergent system
we advise that you:
1. Deactivate the "Multi-tab function".
2. Fill up the salt container and the
rinse aid dispenser again.
3. Adjust the water hardness setting
to the highest setting and perform
1 normal washing programme
without loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the
water in your area.
3. Press button 2, the lights of
buttons 1 and 3 turn off while the
light of button 2 goes on flashing.
5. Adjust the rinse aid dosage.
4. To activate the rinse aid dispenser,
press button 2 again, the end of
programme indicator light
illuminates, indicating that the rinse
aid dispenser has been activated.
5. To memorise the operation, switch
off the dishwasher by pressing the
On/Off button.
6. To deactivate the rinse aid
dispenser again, follow the above
instructions until the end of
programme indicator light turns
Downloaded from DishWasher-Manual.com Manuals
daily use electrolux 25
Select and start a washing
Select the washing programme and
delay start with the door slightly
opened. The start of the
programme or the countdown of
the delay start will occur only after
the closure of the door. Until then it
is possible to modify the settings.
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The
dishwasher must be in setting
4. Press the button corresponding to
the required programme (see
"Washing programmes" chart). The
light corresponding to the selected
programme will illuminate.
In the digital display 3 horizontal
lines are visible.
The programme in progress
indicator light illuminates.
Close the dishwasher door, the
programme starts automatically.
The programme in progress
indicator light remains illuminated.
In the digital display is visible only
1 horizontal line and will remain on
for all the duration of the washing
Setting and starting the programme
with "delay start"
1. After having selected the washing
programme, press the delay start
button until the flashing number of
hours for the delay start will appear
in the digital display. The
commencement of the selected
washing programme can be
delayed from 1 to 9 hours.
2. Close the dishwasher door, the
countdown starts automatically and
the number in the display stops
3. The countdown will decrease with
steps of 1 hour
4. The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
5. Once the delay start has elapsed
the programme will start
With the delay start function set,
the programme in progress
indicator light is off. Once the
countdown of the delay start has
elapsed, the washing programme
will start automatically and the
programme in progress indicator
light will illuminate.
Downloaded from DishWasher-Manual.com Manuals
26 electrolux daily use
The selection of the washing
programme and delay start can
also occur with the door closed.
Keep in mind that in this way, once
a washing programme button is
pressed you have ONLY 3
seconds in which you can choose
another programme or select a
delay start, after which the
selected programme will start
Cancelling the "delay start"
● To cancel a delay start in progress
you have to reset the dishwasher.
● Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights will
Cancelling a delay start involves
also the cancelling of the washing
programme set. In this case you
have to set the washing
programme again.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
● Open the dishwasher door; the
programme will stop. Close the
door; the programme will start from
the point at which it was
Press the On/Off button, all
indicator lights will turn off. Press
the On/Off button again; the
programme will start from the point
at which it was interrupted.
Cancel a washing programme in
● Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights will
illuminate and in the digital display
3 horizontal lines appear. The
washing programme has been
● If a new washing programme is to
be selected, check that there is
detergent in the detergent
Downloaded from DishWasher-Manual.com Manuals
daily use electrolux 27
End of the washing programme
● The dishwasher will automatically
stop and the programme in
progress indicator light turns off.
● The end of programme indicator
light will illuminate.
● The indicator light of the
programme just ended will remain
● The digital display turns off.
1. Switch off the dishwasher by
pressing the On/Off button.
2. Open the dishwasher’s door, leave
it ajar and wait a few minutes
before removing the dishes; in this
way they will be cooler and the
drying will be improved.
Unloading the dishwasher
Hot dishes are sensitive to knocks.
The dishes should therefore be
allowed to cool down before
removing from the appliance.
● Empty the lower basket first and
then the upper one; this will avoid
water dripping from the upper
basket onto the dishes in the lower
● Water may appear on the sides
and the door of the dishwasher as
the stainless steel will eventually
become cooler than the dishes.
When the washing programme has
finished, it is recommended that
the dishwasher is unplugged and
the water tap turned off.
Downloaded from DishWasher-Manual.com Manuals
28 electrolux washing programmes
Washing programmes
Degree of
Type of load
Programme description
Heavy soil
cutlery, pots
and pans
Main wash up to 70°C
2 intermediate rinses
Final rinse
Normal soil
cutlery, pots
and pans
Main wash up to 50°C or 65°C
1 or 2 intermediate rinses
Final rinse
Crockery and
Main wash up to 60°C
Final rinse
Normal soil
Crockery and
Main wash up to 50°C
1 intermediate rinse
Final rinse
Normal soil
crockery and
Main wash up to 45°C
1 intermediate rinse
Final rinse
Light soil
Quick (2)
Downloaded from DishWasher-Manual.com Manuals
washing programmes electrolux 29
Washing programmes information
(1) During the "Auto" washing
programme the amount of soil on
the dishes is determined by how
cloudy the water is.
The programme duration, water
and energy consumption levels
can vary; this depends upon if
the appliance is fully or partially
loaded and if the dishes are
lightly or heavily soiled.
The temperature of the water is
automatically adjusted between
50°C and 65°C.
(2) Ideal for washing a partially
loaded dishwasher. This is the
perfect daily programme, made to
meet the needs of a family of 4
persons who only wish to load
breakfast and dinner crockery
and cutlery.
(3) Test programme for test
Downloaded from DishWasher-Manual.com Manuals
30 electrolux care and cleaning
Care and cleaning
Cleaning the filters
The filters must be checked and
cleaned from time to time. Dirty filters
will degrade the washing result.
Before cleaning the filters ensure
that the machine is switched off.
4. Take hold of the coarse filter (A)
by the handle with the hole and
remove from the microfilter (B).
5. Clean all filters thoroughly under
running water.
6. Remove the flat filter from the
base of the washing compartment
and clean both faces thoroughly.
1. Open the door, remove the lower
2. The dishwasher filter system
comprises a coarse filter (A), a
microfilter (B) and a flat filter.
Unlock the filter system using the
handle on the microfilter.
7. Put the flat filter back in the base
of the washing compartment and
ensure that it fits perfectly.
8. Place the coarse filter (A) in the
microfilter (B) and press together.
3. Turn the handle about 1/4 a turn
anticlockwise and remove the filter
9. Put the filter combination in place
and lock by turning the handle
clockwise to the stop. During this
process ensure that the flat filter
does not protrude above the base
of the washing compartment.
NEVER use the dishwasher without
filters. Incorrect repositioning and
fitting of the filters will produce poor
washing results and may result in
damage to the appliance.
Downloaded from DishWasher-Manual.com Manuals
care and cleaning electrolux 31
NEVER try to remove the spray
If residues of soil have clogged the
holes in the spray arms, remove them
with a cocktail stick.
External cleaning
Clean the external surfaces of the
machine and control panel with a
damp soft cloth. If necessary use only
neutral detergents. Never use
abrasive products, scouring pads or
solvent (acetone, trichloroethylene
Ensure that the seals around the
door, the detergent and rinse aid
dispensers are cleaned regularly with
a damp cloth.
We recommend every 3 months to
run the wash programme for heavy
soiled dishes using detergent but
without dishes.
Frost precautions
Avoid placing the machine in a
location where the temperature is
below 0°C. If this is unavoidable,
empty the machine, close the
appliance door, disconnect the water
inlet pipe and empty it.
Moving the machine
If you have to move the machine
(moving house etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and
discharge hoses.
4. Pull the machine out together with
the hoses.
Avoid over tilting the machine during
Prolonged periods of nonoperation
If you are not using the machine for
any prolonged period of time you are
advised to:
1. Unplug the appliance and then
turn off the water.
2. Leave the door ajar to prevent the
formation of any unpleasant
3. Leave the inside of the machine
Downloaded from DishWasher-Manual.com Manuals
32 electrolux something not working
Something not working
The dishwasher will not start or stops during operation.
Certain problems are due to the lack of simple maintenance or oversights,
which can be solved with the help of the indications described in the chart,
without calling out an engineer.
Switch off the dishwasher, open the door and carry out the following suggested
corrective actions.
Fault code
continuous flashing of the light of the
running programme,
1 flash of the end of programme
indicator light,
The dishwasher does not fill with water
continuous flashing of the light of the
running programme,
2 flashes of the end of programme
indicator light,
Possible cause and solution
The water tap is blocked or furred with
Clean the water tap.
The water tap is turned off.
Turn the water tap on.
The filter (where present) in the threaded
hose fitting at the water inlet valve is
Clean the filter in the threaded hose.
The water inlet hose has not been
correctly laid or it is bent or squashed.
Check the water drain hose connection.
The sink spigot is blocked.
Clean out the sink spigot.
The water drain hose has not been
correctly laid or it is bent or squashed.
Check the water drain hose connection.
Close the water tap and contact your
local Service Force Centre.
The dishwasher will not drain
continuous flashing of the light of the
running programme,
3 flashes of the end of programme
indicator light,
Anti-flood device is activated
Downloaded from DishWasher-Manual.com Manuals
something not working electrolux 33
The programme does not start
Once these checks have been carried
out; close the dishwasher’s door and
switch on the appliance. Press the
button of the programme that was
running before the intervention of the
alarm. The programme will continue
from the point at which it was
If the malfunction or fault code
reappears contact the Service Force
For other fault codes not described in
the above chart, please contact your
Service Force Centre.
Possible cause and solution
The dishwasher’s door has not been
properly closed.
Close the door.
The main plug is not plugged in.
Insert the main plug.
The fuse has blown out in the household
fuse box.
Replace the fuse.
Delay start has been set.
If dishes are to be washed immediately,
cancel the delay start.
So that you always have these
numbers at hand, we recommend you
to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
Contact your local Service Force
Centre, quoting the model (Mod.),
product number (PNC) and serial
number (S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
Downloaded from DishWasher-Manual.com Manuals
34 electrolux something not working
The wash results are not satisfactory
The dishes are not clean
The dishes are wet and
There are streaks, milky
spots or a bluish coating
on glasses and dishes
Water drops have dries
onto glasses and dishes
The wrong washing programme has been selected.
The dishes are arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not
be overloaded.
The spray arms do not rotate freely due to incorrect
arrangement of the load.
The filters in the base of the washing compartment are
dirty or incorrectly positioned.
Too little or no detergent has been used.
Where there are limescales deposits on the dishes; the
salt container is empty or the incorrect level of the water
softener has been set.
The drain hose connection is not correct.
The salt container cap is not properly closed.
Rinse aid was not used.
The rinse aid dispenser is empty.
Decrease rinse aid dosing.
Increase rinse aid dosing.
The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
If after all these checks, the problem
persists, contact your local Service
Force Centre.
Downloaded from DishWasher-Manual.com Manuals
technical data electrolux 35
Technical data
59.6 cm
81.8 - 87.8 cm
55.5 cm
Electrical connection
Voltage - Overall power Fuse
Information on the electrical connection is given
on the rating plate on the inner edge of the
dishwasher’s door
Water supply pressure
0.05 MPa
0.8 MPa
Max. weight
Noise level
Subject to change without notice
Downloaded from DishWasher-Manual.com Manuals
12 place settings
42 kg
47 dB (A)
36 electrolux technical data
Consumption values
(in minutes)
(in kWh)
(in litres)
110 - 120
1.8 - 2.0
23 - 25
90 - 115
1.1 - 1.5
12 - 23
60 - 70
0.8 - 0.9
14 - 15
(Test programme
for test institutes)
The consumption values are intended
as a guide and depends on the
pressure and the temperature of the
water and also by the variations of the
power supply and the amount of
Downloaded from DishWasher-Manual.com Manuals
hints for test institutes electrolux 37
Hints for test institutes
Testing in accordance with EN 60704
must be carried out with appliance
fully loaded and using the test
programme (see "Consumption
Test in accordance with EN 50242
must be carried out when the salt
container and rinse aid dispenser
have been filled with salt and rinse aid
respectively and using the test
programme (see "Consumption
Full load: 12 standard place settings
Amount of detergent required:
5 g + 25 g (Type B)
Rinse aid setting:
position 4 (Type III)
Arrangement upper basket
(take off the glass holder)
Arrangement cutlery
Arrangement lower basket
Downloaded from DishWasher-Manual.com Manuals
38 electrolux installation
Any electrical and/or plumbing
work required to install this
appliance should be carried out by
a qualified electrician and/or
plumber or competent person.
Remove all packaging before
positioning the machine.
If possible, position the machine next
to a water tap and a drain.
This dishwasher is designed to be
fitted under a kitchen counter or
Attention! Carefully follow the
instructions on the enclosed template
for building in the dishwasher and
fitting the furniture panel.
No further openings for the venting of
the dishwasher are required, but only
to let the water fill and drain hose and
power supply cable pass through.
The dishwasher incorporates
adjustable feet to allow the
adjustment of the height.
During all operations that involve
accessibility to internal components
the dishwasher has to be unplugged.
When inserting the machine, ensure
that the water inlet hose, the drain
hose and the supply cable are not
kinked or squashed.
Fixing to the adjacent units
The dishwasher must be secured
against tilting.
Therefore make sure that the counter
it is fixed under, is suitably secured to
a fixed structure (adjacent kitchen
units cabinets, wall).
Good levelling is essential for correct
closure and sealing of the door.
When the appliance is correctly
levelled, the door will not catch on
either side of the cabinet.
If the door does not close correctly,
loosen or tighten the adjustable feet
until the machine is perfectly level.
Water supply connections
This dishwasher may be fed with
either hot (max. 60°) or cold water.
Nevertheless we advise you a cold
water supply.
A hot water supply is not always
efficient with very soiled crockery as it
shortens the washing programmes a
For making the connection itself, the
coupling nut fitted to the machine’s
supply hose is designed to screw onto
a 3/4" gas thread spout or to a
purpose made quick-coupling tap
such as the Press-block.
The water pressure must be within
the limits given in the "Technical
specifications". Your local Water
Authority will advise you on the
average mains pressure in your area.
The water inlet hose must not be
kinked, crushed, or entangled when it
is being connected.
The dishwasher features fill and drain
hoses which can be turned either to
the left or the right to suit the
installation by means of the locknut.
The locknut must be correctly fitted
to avoid water leaks.
Downloaded from DishWasher-Manual.com Manuals
installation electrolux 39
(Attention! NOT all models of
dishwashers have fill and drain hoses
provided with locknut. In this case,
this kind of facility is not possible).
If the machine is connected to new
pipes or pipes which have not been
used for a long time, you should run
the water for a few minutes before
connecting the inlet hose.
DO NOT use connection hoses
which have previously been used
for an old appliance.
This appliance has been fitted with
safety features which will prevent the
water used in the appliance from
returning back into the drinking water
system. This appliance complies with
the applicable plumbing regulations.
Water inlet hose with safety valve
After connecting the double-walled
water inlet hose, the safety valve is
next to the tap. Therefore the water
inlet hose is only under pressure
while the water is running. If the water
inlet hose starts to leak during this
operation, the safety valve cuts off the
running water.
Please take care when installing the
water inlet hose:
The electrical cable for the safety
valve is in the double-walled water
inlet hose. Do not immerse the
water inlet hose or the safety valve
in water.
If water inlet hose or the safety
valve is damaged, remove the
mains plug immediately.
A water inlet hose with safety valve
must only be replaced by a
specialist or by the Service Force
Place the water inlet hose in such
a way that it is never higher than
the bottom edge of the safety
Dangerous voltage
Downloaded from DishWasher-Manual.com Manuals
40 electrolux installation
Water outlet hose connection
The end of the drain hose can be
connected in the following ways:
1. To the sink outlet spigot, securing
it to the underside of the work
surface. This will prevent waste
water from the sink running into
the machine.
2. To a stand pipe provided with venthole, minimum internal diameter 4
The waste connection must be at a
maximum height of 60 cm from the
bottom of the dishwasher.
The drain hose can face either to the
right or left of the dishwasher
Ensure the hose is not bent or
squashed as this could prevent or
slow down the discharge of water.
The sink plug must not be in place
when the machine is draining as this
could cause the water to syphon back
into the machine.
The total length of the drain hose,
including any extension you might
add, must be no longer than 4 metres.
The internal diameter of the extension
hose must be no smaller than the
diameter of the hose provided.
Likewise the internal diameter of the
couplings used for connections to the
waste outlet must be no smaller than
the diameter of the hose provided.
When connecting the drain hose to an
under sink trap spigot, the entire
plastic membrane (A) must be
removed. Failure to remove all the
membrane will result in food particles
building up over time eventually
blocking the dishwasher drain hose
Our appliances are supplied with a
security device to protect against the
return of dirty water back into the
If the spigot of your sink has a "no
return valve" incorporated this can
prevent the correct draining of your
dishwasher. We therefore advise you
to remove it.
Downloaded from DishWasher-Manual.com Manuals
installation electrolux 41
Electrical connection
Safety standards require the
appliance to be earthed.
Prior to using the appliance for the
first time, ensure that the rated
voltage and type of supply on the
rating plate match that of the
supply where the appliance is to be
installed. The fuse rating is also to
be found on the rating plate.
Always plug the mains plug into a
correctly installed shockproof
Multi-way plugs, connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic
wiring system socket replaced. In
case that the electrical cable has to
be replaced, contact your local
Service Force centre.
The plug must be accessible after
the appliance has been installed.
Never unplug the appliance by
pulling on the cable. Always pull
the plug.
The manufacturer accepts no
liability for failure to observe the
above safety precautions.
Downloaded from DishWasher-Manual.com Manuals
42 electrolux environment concerns
Environment concerns
Packaging material
The packaging materials are
environmentally friendly and can be
recycled. The plastic components are
identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the
packaging materials in the appropriate
container at the community waste
disposal facilities.
When a unit is no longer being used:
- Pull the plug out of the socket.
- Cut off the cable and plug and
dispose of them.
- Dispose of the door catch. This
prevents children from trapping
themselves inside and
endangering their lives.
Old appliance
The symbol
on the product or on
its packaging indicates that this
product may not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
For more detailed information about
recycling of this product, please
contact your local city office, your
household waste disposal service or
the shop where you purchased the
Downloaded from DishWasher-Manual.com Manuals
guarantee/customer service electrolux 43
Guarantee/Customer Service
Our appliances are produced with the
greatest of care. However, a defect
may still occur.
Our consumer services department
will repair this upon request, either
during or after the guarantee period.
The service life of the appliance will
not, however, be reduced as a result.
This declaration of guarantee terms is
based on European Union Directive
99/44/EC and the provisions of the
Civil Code. The statutory rights that
the consumer has under this
legislation are not affected by this
declaration of guarantee terms.
This declaration does not affect the
vendor's statutory warranty to the end
user. The appliance is guaranteed
within the context of and in adherence
with the following terms:
1. In accordance with provisions laid
down in paragraphs 2 to 15, we
will remedy free of charge any
defect that occurs within 24
months from the date the
appliance is delivered to the first
end user. These guarantee terms
do not apply in the event of use
for professional or equivalent
2. Performing the guarantee means
that the appliance is returned to
the condition it was in before the
defect occurred. Defective parts
are replaced or repaired. Parts
replaced free of charge become
our property.
3. So as to avoid more severe
damage, the defect must be
brought to our attention
4. Applying the guarantee is subject
to the consumer providing proof of
purchase showing the purchase
and/or delivery date.
5. The guarantee will not apply if
damage caused to delicate parts,
such as glass (vitreous ceramic),
synthetic materials and rubber, is
the result of inappropriate use.
6. The guarantee cannot be called
on for minor faults that do not
affect the value or the overall
reliability of the appliance.
7. The statutory warranty does not
apply when defects are caused
– a chemical or electrochemical
reaction caused by water,
– abnormal environmental
conditions in general,
– unsuitable operating conditions,
– contact with harsh substances.
8. The guarantee does not apply to
defects due to transport which
have occurred outside of our
responsibility. Nor will the
guarantee cover those caused by
inadequate installation or
assembly, lack of maintenance or
failure to respect the assembly
instructions or directions for use.
Downloaded from DishWasher-Manual.com Manuals
44 electrolux guarantee/customer
9. Defects that result from repairs or
measures carried out by people
who are not qualified or expert or
defects that result from the
addition of non-original
accessories or spare parts are not
covered by the guarantee.
10. Appliances that are easy to
transport may be delivered or sent
to the consumer services
department. Home repairs are
only anticipated for bulky
appliances or built-in appliances.
11. If the appliances are built-in, builtunder, fixed or suspended in such
a way that removing and replacing
them in the place where they are
fitted takes more than half an
hour, the costs that result
therefrom will be charged for.
Connected damage caused by
these removal and replacement
operations will be the
responsibility of the user.
12. If, during the guarantee period,
repairing the same defect
repeatedly is not conclusive, or if
the repair costs are considered
disproportionate, in agreement
with the consumer, the defective
appliance may be replaced with
another appliance of the same
value. In this event, we reserve
the right to ask for a financial
contribution calculated according
to the length of time it has been
13. A repair under guarantee does not
mean that the normal guarantee
period will be extended nor that a
new guarantee period begins.
14. We give a twelve month
guarantee for repairs, limited to
the same defect.
15. Except in the event where liability
is legally imposed, this declaration
of guarantee terms excludes any
compensation for damage outside
the appliance for which the
consumer wishes to assert his
rights. In the event of legally
admitted liability, compensation
will not exceed the purchase price
paid for the appliance.
These guarantee terms are only valid
for appliances purchased and used in
Belgium. For exported appliances, the
user must first make sure that they
satisfy the technical conditions (e.g.:
voltage, frequency, installation
instructions, type of gas, etc.) for the
country concerned and that they can
withstand the local climatic and
environmental conditions. For
appliances purchased abroad, the
user must first ensure that they meet
the qualifications required in Belgium.
Non-essential or requested
adjustments are not covered by the
guarantee and are not possible in all
Our consumer services department is
always at your disposal, even after
the guarantee period has expired.
Address for our consumer services
Electrolux Home Products Belgium
Bergensesteenweg 719
1502 Lembeek
Consumer services
Tel.: 02/363.04.44
Fax.: 02/363.04.00
Downloaded from DishWasher-Manual.com Manuals
guarantee/customer service electrolux 45
European guarantee
Grand-Duché de Luxembourg
Rue de Bitbourg. 7
L-1273 Luxembourg-Hamm
Consumer services
Tel.: 00 352 42 431-1
Fax.: 00 352 42 431-360
This appliance is guaranteed by
Electrolux, in each of the countries
listed in the following page, for the
period specified in the appliance
guarantee or otherwise by law. If you
move from one of these countries to
another of these countries the
appliance guarantee will move with
you subject to the following
The appliance guarantee starts
from the date you first purchased
the appliance which will be
evidenced by production of a valid
purchase document issued by
seller of the appliance.
The appliance guarantee is for the
same period and to the same
extent for labour and parts as
exists in your country of residence
for this particular model or range of
The appliance guarantee is
personal to the original purchaser
of the appliance and cannot be
transferred to another user.
The appliance is installed and
used in accordance with
instructions issued by Electrolux
and is only used within the home,
i.e. is not used for commercial
The appliance is installed in
accordance with all relevant
regulations in force within your
new country of residence.
The provisions of this European
Guarantee do not affect any of the
rights granted to you by law.
Downloaded from DishWasher-Manual.com Manuals
46 electrolux guarantee/customer
+35 5 4 261 450
+32 2 363 04 44
Rr. Pjeter Bogdani Nr. 7 Tirane
Bergensesteenweg 719, 1502 Lembeek
Česká republika
+420 2 61 12 61 12
Budějovická 3, Praha 4, 140 21
+45 70 11 74 00
+49 180 32 26 622
+37 2 66 50 030
+34 902 11 63 88
Sjællandsgade 2, 7000 Fredericia
Muggenhofer Str. 135, 90429 Nürnberg
Mustamäe tee 24, 10621 Tallinn
Carretera M-300, Km. 29,900
Alcalá de Henares Madrid
Great Britain
+44 8705 929 929
+30 23 10 56 19 70
+385 1 63 23 338
+353 1 40 90 753
+39 (0) 434 558500
+37 17 84 59 34
Addington Way, Luton, Bedfordshire
4 Limnou Str., 54627 Thessaloniki
Slavonska avenija 3, 10000 Zagreb
Long Mile Road Dublin 12
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Kr. Barona iela 130/2, LV-1012, Riga
+370 5 27 80 609
Verki˜ 29, LT-09108 Vilnius
+35 2 42 43 13 01
+36 1 252 1773
+31 17 24 68 300
+47 81 5 30 222
+43 18 66 400
+48 22 43 47 300
+35 12 14 40 39 39
+40 21 451 20 30
+41 62 88 99 111
Rue de Bitbourg, 7, L-1273 Hamm
H-1142 Budapest XIV, Erzsébet királyné útja 87
Vennootsweg 1, 2404 CG - Alphen aan den Rijn
Risløkkvn. 2, 0508 Oslo
Herziggasse 9, 1230 Wien
ul. Kolejowa 5/7, Warsaw
Quinta da Fonte - Edificio Gonçalves Zarco Q 35 - 2774 - 518 Paço de Arcos
Str. Garii Progresului 2, S4, 040671 RO
Industriestrasse 10, CH-5506 Mägenwil
+38 61 24 25 731
Electrolux Ljubljana, d.o.o.
Gerbičeva 98, 1000 Ljubljana
+421 2 43 33 43 22
Electrolux Slovakia s.r.o., Electrolux
Domáce spotrebiče SK,
Seberíniho 1, 821 03 Bratislava
+46 (0)771 76 76 76
Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm
+90 21 22 93 10 25
Tarlabafl› caddesi no : 35 Taksim Istanbul
+7 495 9377837
Downloaded from DishWasher-Manual.com Manuals
Downloaded from DishWasher-Manual.com Manuals
Downloaded from DishWasher-Manual.com Manuals
117991 68/0-00-19012007