Mitsubishi Electric City Multi PEFY-P125VMH-E Specifications

CM11WD-
Air conditioning is an ideal way of controlling the temperature, movement and
cleanliness of air inside any building, large or small. With today's buildings being so
well insulated and increasingly full of electronic equipment, the need for effective
climate control is greater than ever. Not only does it cool in the summer months, but
air conditioning can also heat, doing away with the need for separate heating systems
altogether. More and more people today are enjoying the benefits of comfortable
working and living environments made possible with air conditioning.
Unsurpassed air conditioning
from Mitsubishi Electric
Known the world over, the name
Our Latest Technologies
Mitsubishi is a trusted household
name associated with a variety of
V RF system
VRF stands for Variable Refrigerant Flow.
A VRF air conditioning system modulates the
flow of refrigerant depending upon the capacity
requirements of the building. In its simplest
form, a VRF system comprises an air-cooled
outdoor unit and a series of indoor units that
regulate the air temperature inside an internal
space.
I
ntelligent Power Module (IPM)
technology
products and services. Founded in
1920, the company known today as
The CITY MULTI range from Mitsubishi Electric
provides precise control of energy input,
through utilization of its Intelligent Power
Module (IPM) technology. By employing this
technology, highly efficient operation is possible
with compact units closely matching building
requirements.
Contents
Features of Mitsubishi Electric
air conditioners
Page 1-16
Remote Controller
Page 17-38
Indoor unit
Page 39-81
Mitsubishi Electric, quickly rose to the
Outdoor unit
forefront of the air conditioning
Optional parts
Page 82-137
Page 139-142
industry - a position we still enjoy
today. We pride ourselves on offering
I
nverter driven technology
At Mitsubishi Electric we strive to continually
meet the increasing demands of our customers,
being the first in the industry to offer highly
advanced ‘inverter driven’ systems. Using
inverter technology our systems produce just
the right amount of output to match the exact
requirement of any building. These systems
work so efficiently that they don’t waste
valuable
energy
by
over-heating
or
over-cooling, resulting in greatly reduced
running costs. Alternative systems that may
appear cheaper, can often cost substantially
more to run, making us the most cost effective
choice all round.
Page 1
R 410A refrigerant
some of the most energy efficient
As scientific evidence points to man-made
chemicals for the damage caused to the ozone
layer, we only use chlorine-free refrigerants
that are safe with zero ODP (Ozone Depletion
Potential). Accordingly, our systems require
less energy to run, and have a significantly
lower indirect global warming potential. In
short, we produce the most efficient equipment
possible, while helping to protect the environment.
systems available on the market.
Page 2
V RF system
Our answer to VRF
Mitsubishi Electric sets the boundaries of VRF technology with the CITY MULTI range, which is available using
R410A refrigerant with zero ODP (Ozone Depletion Potential). The range has been specifically designed for
today’s building requirements and addresses key market issues such as energy efficiency, adaptability and
reliability. With user friendly control systems utilizing internet technology and integrated cooling and ventilation
indoor units, CITY MULTI is the benchmark and market leader in VRF technology.
VRF is a multi and direct expansion type air conditioning system where by one outdoor unit can be connected with
multiples indoor units. The amount of refrigerant can be regulated freely according to the load on the indoor unit by
the inverter driven compressor in the outdoor unit. Zoning in a small office is possible with a small capacity indoor
unit. Energy conservation is easily handled because individual indoor units can stop and start their operation as
needed. There are various indoor units available in order to suit various interior design needs.
Inverter driven compressor
Sophisticated
yet simple technology
Outdoor unit
Joint
Header
Reliable
Designed and manufactured to the highest standards, the
CITY MULTI range offers one of the most reliable air
conditioning systems available. Simple to install and easy to
maintain, this range provides ideal solutions you can trust to
protect your investment.
Indoor unit
OFF
PEFY-VMS1
ON 27°c
ON 25°c
Controller
PEFY-VMR
PFFY-VKM
>All the CITY MULTI outdoor units are made in Japan under stringent control.
ON 25°c
ON 26°c
OFF
ON 23°c
I nverter Driven Compressor
Technology - now up to 50HP
Low
Starting
Currents
Using inverter driven technology
saves energy for several reasons:
The compressor varies its speed to match the indoor cooling or heating demand and therefore only consumes the
energy that is required.
When an inverter driven system is operating at partial load, the energy
efficiency of the system is significantly higher than that of a standard fixed
speed, non inverter system.
The fixed speed system can only operate at 100%, however, partial load
conditions prevail for the majority of the time. Therefore fixed speed
systems cannot match the annual efficiencies of inverter driven systems.
Heating / Cooling Capacity
100%
Linear Capacity
Control
15%
Using proven single inverter driven compressor technology, the CITY
MULTI range is favored by the industry for low starting currents (only 8 amps
for a 16HP YJM-A outdoor unit), and smooth transition across the range of
compressor frequencies.
Unbeatable Efficiency
15Hz
Cooling:74Hz
Heating:81Hz
Compressor Frequency
* image
* The values vary depending on the actual
conditions such as ambient temperature.
All CITY MULTI compressors are inverter-driven type.
-Capable of precisely matching a building's cooling and heating demands.
Heat Interchange Circuit
The unique Heat Interchange Circuit (HIC) enhances efficiency by providing additional sub-cooling and allows the
expansion device to effectively control the refrigerant distribution, thereby increasing the operating efficiency and
reducing the volume of refrigerant in each system.
CITY MULTI Refrigerant Circuit
The outdoor unit combinations comprise 1 unit for 8-18HP systems (for Y and R2 series), 2 units for 20-36HP
systems (for R2, 18-36HP) and 3 units for 38-50HP systems (Y series only). Each unit carries one inverter
compressor making simple and highly reliable control possible.
Not only does it allow low starting currents, the inverter-driven compressor also provides precise indoor comfort
and adapts to the air conditioning load.
Common Refrigerant Circuit
Condenser
Condenser
Stable and smooth operation
High temperature
Compressor
Compressor
Heat exchanger
Supercooled
heat exchanger
Accumulator
Low temperature
LEV
capacity
Y series 8-18HP
R2 series 8-18HP
capacity
Y series 20-36HP
R2 series 18-36HP
capacity
Y series 38-50HP
100%
100%
100%
Accumulator
3 inverter compressors
1 inverter compressor
2 inverter compressors
Medium temperature
Bypass
No2
Inverter
Evaporator
LEV
No3
No2
Evaporator
No1
LEV
load
No1
No1
load
No1
No2
No1
load
I ntelligent Power Module (IPM)
Technology
The YJM-A range from Mitsubishi Electric provides precise control of energy input, through utilization of its
Intelligent Power Module (IPM) technology. By employing this technology it is possible to closely match the
building requirements, achieving more accurate control of the occupied space. By using incremental 1Hz steps of
capacity control, the amount of power input required is significantly reduced, resulting in greatly improved COP’s.
In addition, IPM technology ensures effective performance under partial load conditions, a condition that most
systems will be in for the majority of the normal working life cycle. By taking account the efficiency at both part
load, and peak load conditions, R410A CITY MULTI is designed to provide unbeatable year round/seasonal
efficiency.
The difference between YJM-A and previous
Mitsubishi Electric models
Total Energy Conservation
Technology is key when increased efficiency is demanded.
The CITY MULTI YJM-A range is able to deliver this in simple ways.
A highly efficient R410A scroll compressor design results in less friction losses at the motor. A simplified refrigerant
circuit (low pressure loss) including a new accumulator design also adds a few more points to the efficiency scale.
Enhancements to the heat interchange circuit, an inverter driven fan motor and a heat exchanger design again add
vital increases to overall system efficiencies and COPs.
Comparison of COP (energy efficiency) – 8HP system
COP
5.0
The importance of COP
4.5
56%
Energy
efficiency
44%
4.0
Energy efficiency
4.45
4.13
3.5
3.0
High COP (Coefficient of Performance)
is realized
2.5
2.86
2.0
0
R22
Our equivalent product
10 years ago, PUHY-200YMF
Standard model
High COP model
* Average COP of cooling / heating
* The values were obtained under the standard conditions.
COP stands for “Coefficient of Performance”. It is a measure of the useful energy a system can deliver compared
to the energy it consumes. It is calculated by dividing the energy output by the energy input of a system. The
higher the figure then the more efficient the system is deemed to be. Mitsubishi Electric VRF models, the world's
highest energy-efficient air-conditioners, will undoubtedly reduce millions of tons of CO2 emissions.
E fficient R410A refrigerant
History of refrigerant
R22, an HCFC-based refrigerant, has been a popular choice for most chillers. R22 has been targeted by the
Montreal Protocol to be phased out in new equipment. Additionally, governments in many countries are enforcing a
ban of HCFC-based refrigerants for new installations.
Because of these restrictions, R410A refrigerants are desirable. R410A is a blend of HFCs, which do not deplete
the ozone.
Technical aspects of refrigerant
For the Environment
R410A is a more efficient refrigerant as it has a higher specific heat capacity when compared to R407C or R22.
This higher energy carrying capacity allows for smaller pipe sizes, longer pipe runs and reduces the volume of
refrigerant within a system. This is a major factor when concerning safety and environmental requirements in the
design, manufacture, installation, operation, maintenance and disposal or refrigerating systems.
New Design
Reduction of operation noise
Enhancing environmental care (measures for the RoHS Directive and the refrigerant reduction)
Every unit is in compliance with the RoHS Directive,* which stands for the Restriction of Hazardous Substances:
Lead-free soldering is used to avoid Lead Groundwater Contamination on the print board. The amount of
refrigerant on the unit has also been reduced to enhance environmental care.
* RoHS Directive: the restriction of the use of certain hazardous substances in electrical and electronic equipment that has been sold in EU since July 2006
Improvement of COP
Improvement of COP
Photo : Y series
Improvement of reliability and
easy maintenance
U nique technology
Unique to Mitsubishi Electric, our heat recovery technology uses just two pipes,
as opposed to the market conventional three. Designed for effective simultaneous
heating and cooling our R2 and WR2 systems offer substantial savings on
installation and annual running costs.
Why Heat Recovery?
Flexibility and efficiency are key factors when selecting a heat recovery system. For example, while a heat pump
system is adequate for a large open-plan office, an office that has a more partitioned structure will require the need
to simultaneously heat or cool different sections of the office according to each user's individual preferences. The
efficiency of this type of system comes from the ability to use the by-products of cooling and heating to transfer
energy where it is required, thus acting as a balanced heat exchanger achieving up to 20% cost savings over a
conventional heat pump system. The number of connection sites needed for a R2 / WR2 system are also significantly lower than those needed for a three pipe version. This helps to reduce installation costs, further increasing
the savings associated with CITY MULTI.
Affordable & Effective
Office
Cooling
Outdoor unit
Meeting room
Cooling
BC controller
air conditioning you can rely on
Refrigerant piping: 2-pipe type
By the heat recovery system, the more frequently cooling and heating simultaneous
operation is carried out, the higher energy-saving effect becomes.
Operation pattern of
Heating indoor unit
15HP
10HP
7.5HP
System
(
Total 15HP indoor unit is connected
with 10HP outdoor unit.
A Mainly heating operation
)
Equipment room
Cooling
Meeting room
Heating
B Total heat recovery operation
Office
Heating
5HP
C
5HP 7.5HP 10HP
Cooling indoor unit
15HP
Office compartment
Heating
T he world’s first and
the only “2-pipe” system
How does the R2/WR2 Heat Recovery System
operate on 2 Pipe’s?
The secret of CITY MULTI heat recovery systems lies in the
BC Controller
“2-pipe” system provides
Better Efficiency and Performance
The BC Controller houses a liquid/gas separator,
allowing the outdoor unit to deliver a mixture (2
phase) of hot gas for heating and liquid for cooling,
all through the same pipe. Three pipe systems
allocate a pipe to each of these phases. When this
mixture arrives at the BC Controller, it is separated
and the correct phase delivered to each indoor unit
depending on the individual requirement of either
heating or cooling.
2 R2/WR2 refrigerant circuit
Gas-liquid 2-phase refrigerant from outdoor unit into
gas refrigerant and liquid refrigerant is divided by
gas-liquid separator in BC controller.
1
Comparison example of piping connection sites
= 2 sites
CITY MULTI R2
Outdoor Unit
BC Controller
High pressure and low pressure
decides the compressor frequency
and the mode of heat exchanger,
and control the amounts of heat
exchange.
= 3 sites
Liquid refrigerant
Gas refrigerant
Gas
refrigerant
High pressure
gas-liquid 2 phase
refrigerant
3 Pipe System
Outdoor Unit
BC controller divides refrigerant to each indoor unit
properly in compliance with the operation mode of
each indoor unit.
BC controller
Outdoor unit
Liquid
refrigerant
3
Adjust the refrigerant flow by temperature
difference between inlet and outlet.
Indoor unit
Heating 25°C
Heating 26°C
Cooling 22°C
Cooling 24°C
Meet the demand of
cooling / heating flexibly.
Solenoid Box
Indoor Units
MITSUBISHI ELECTRIC
Indoor Units
OTHER MANUFACTURERS
Heating=gas refrigerant
Cooling=liquid refrigerant
E nergy Saving Technology
What is Water-Cooled?
>A unique offering from Mitsubishi Electric
It is possible now to combine the features of VRF with a water circuit using CITY
MULTI WR2/WY. In this case the heat is rejected to a water source rather than to
the outside air.
The advantages of water cooled systems are that the water can be delivered at
optimised temperatures and volumes, which allows even greater flexibility and
increased COP.
WR2(Heat recovery type)
Mitsubishi Electric now offers double heat recovery operation.
The first heat recovery is within the refrigerant system. Simultaneous cooling and heating operation is available
with heat recovery performed between indoor units.
The second heat recovery is within the water loop, where heat recovery is performed between the PQRY units.
This double heat recovery operation substantially improves energy efficiency and makes the system the ideal
solution to the requirements of modern office buldings, where some areas require cooling even in winter.
BC controller
Meeting room
Heating
Equipment room
Cooling
Equipment room
Cooling
Heat source unit
Water Cooled CITY MULTI Benefits
Water piping
Heat
source
unit
Water cooled systems are ideally suited for use in temperate and
cooler climates since heat exchange with the outside air is not
required.
Director's room
Heating
Water cooled systems can be used even in buildings
that are taller than 50m by running a main water pipe
through each floor.
Any heat source system that can supply heat source
water between 10°C~45°C can be used.
Double heat recovery (WR2)
Indoor units
Heat source unit
Simultaneous heating and cooling operation is available.
(WR2 series)
It is suggested that Water-Cooled systems are used in the
buildings in which there are heating and cooling needs as follows.
Buildings that require all year cooling
Example,
Tenant buildings in which kitchens and offices exist together
Buildings in which equipment rooms and offices exist together
BC controller
Heat recovery
Meeting room
Heating
Heat recovery
Indoor units
Buildings in which there are large room temperature
differences between sunny and unsunny rooms
Hotels in which there are a lot of individual operation needs
Heat recovery
Water
circuit
Refrigerant Circuit
Heating
Cooling
The importance of control
The need for control is paramount in order
to optimise the performance of any air
conditioning system and minimize its
running costs. Mitsubishi Electric offers a
wide range of control options designed to
meet such needs.
Operating an air conditioning system without
the right control can prove costly. It's therefore
important to ensure that every system is
correctly specified to the degree of control it
requires. Mitsubishi Electric have a wide range
of controls available 'off-the-shelf' and
individual control systems can be specifically
designed to match.
A degree of difference
When an air conditioning system is not
properly controlled, it will not run as efficiently
as it should. For every degree that the system
deviates from the required temperature,
energy costs can rise by up to 5%. Specify one
of the many control options from Mitsubishi
Electric to ensure air conditioning works as
intended, whilst giving the optimum amount of
control.
The simpler, the better
R emote Controller
Individual Remote Controller
Centralized Remote Controller
Good controls will benefit any application,
large or small. Air conditioning products need
to react to a variety of factors: different room
sizes, usage and staff levels; changes in the
climate; electronic equipment and lighting ...the
list goes on. So whatever the application,
optimum control of air conditioning systems is
essential and will result in a constant,
comfortable environment, which in turn is both
energy and cost efficient.
With the array of comprehensive control
systems available from Mitsubishi Electric, it
becomes simple to design and install air
conditioning systems. From a simple
hand-held controller to a AG-150A system you are in control.
Integrated Communications Control
with Mitsubishi's Unique Transmission Network (M-NET)
System Controller
MITSUBISHI ELECTRIC's Air-conditioner Network System (MELANS) leads air conditioner management a PC
browser and Network era.
MELANS
Use of our MELANS products enhances EFFICIENCY and QUALITY of air-conditioning, contributing to
ENERGY SAVING and reduction in running cost. We offer a wide variety of MELANS products to meet all
requirements - from the smallest and simplest to the largest and most complex.
We have individual remote controllers, various centralized controllers, and centralized integrated software, as
well as BMS interface hardware and software etc. Above all, with AG-150A/GB-50ADA, PC browser and long
distance remote control (monitoring and operating) via communication Network is possible and easy.
I
C entralized Remote Controller
ndividual Remote Controller
All of the local remote controllers feature liquid
crystal and LED displays and easy to operate.
Remote
Controller
M-NET
Simple
Remote
Controller
System
Remote
Schedule
Controller Timer
ON/OFF
Remote
Controller
Group
Remote
Controller
PAC-YT40ANRA
PAC-SC30GRA
Wireless
Remote
Controller
PAC-SF44SRA
PAC-YT34STA
Touch
Controller
PAR-30MAA
PAR-21MAA
PAC-YT51CRB
PAC-SE51CRA
PAR-FL32MA PAR-FA32MA
AT-50A
PAR-F27MEA
AG-150A
PAC-YG50ECA
GB-50ADA
PI Controller
OUTDOOR UNIT
S
Y
HP
R2
WY
WR2
:PUMY
:PUHY
:PUHY-HP
:PURY
:PQHY
:PQRY
INDOOR UNIT
PEFY
PMFY
PLFY
PCFY
PKFY
PFFY
PAC-YG60MCA
DIDO Controller
BAC-HD150
BACnet
transmission line
(Ethernet)
AI Controller
Interface
PAC-YG63MCA
LMAP02
A ir-Conditioning
LONWORKS
Control System
transmission line
MITSUBISHI ELECTRIC's
CITY MULTI can be easily
connected to the building
managementsystem through
BACnet .
This is a specialized air conditioning management system, in which
up to 2000 indoor units can be
centrally controlled.
Integrated centralized
control software
TG-2000A
"#
$A;<.5,76<:744.:
"#
"#
"
"
"#
"
"
"
"
)%# $# )%
# $
# $$# )%$%
%
")
=<747,3
201<;.<+*,3
$42-260<.58.:*<=:.,76<:74
C*6*0.5.6<:7=86<.:47,3.-
'.6<24*<27626<.:47,3
:7=8;.<<260
47,3;.<<260
#.>2;2767/.4.,<:2,2<A,1*:0.
C!8.:*<26076!$$ )26<.:47,3.-:7=86<.:47,3.-
! !
*6;8..'.6<24*<27657-.
C$<*<=;5762<7:26076!$$ )26<.:47,3.-:7=86<.:47,3.-
! !
*6;8..'.6<24*<27657-.
Integrated centralized
control software TG-2000A
*,10:7=8*<,1.-
*,10:7=8
47,3/7:%)&%6-77:=62<67</7:*44:$
42,.6;.:.02;<:*<27687;;2+4.
2,.6;.:.02;<:*<276/7:<1.78<276*4/=6,<276;:.9=2:. 7<>*24*+4. 7<&;.-
*<,1.-764A
*<,1.-1*6-4260/7:5*26<.6*6,.
47,3
Ethernet
%
76<:744*+4.:7=8;6-77:; :7=86-77:
:7?;.: :7?;.: :7?;.:
C!8.:*<260
! !
7-.,7741.*<-:A/*6
%.58.:*<=:.;.<
7,*4".:52<":712+2<
*6;8..2:/47?-2:.,<276
C$<*<=;5762<7:260
! !
7-.,7741.*<-:A/*6
%.58.:*<=:.;.<
7,*4".:52<":712+2<
*6;8..2:/47?-2:.,<276
6-77:<.58.:*<=:.
24<.:;206
::7:/4*;1260
::7:,7-.
!8.:*<27617=:
C$,1.-=4260
!6.-*A
%25.;7/! !8.:-*A (..34A
%25.;7/! !8.:?..3 @ @
@ @
@ @ @ @ @ @
66=*4
!8<252B.-;<*:<=8
=<77//<25.:
26<25.:;.<<260=62<526=<.
C#.,7:-260
::7::.,7:*24A576<14A:.87:<
4.,<:2,2<A,1*:0.
C!<1.:
%.58;.<4252<*<276+A7,*4#
%.58;.<4252<*<276+A$A;<.5,76<:744.:
PAC-YG66DCA
Interface
7,*4:.57<.,76<:744.:
7-.4
:7=8;.<<260>2*?2:260+.<?..66-77:=62<;?2<1,:7;;7>.:,*+4.
6;<*44*<27687;;2+4.*<62<2*4;.<<260?.++:7?;.:
6<.:47,32;;.<*<7,*4:.57<.,76<:744.:
42,.6;.:.02;<:*<276<7
2;:.9=2:.-<75762<7:*6-78.:*<.<1.=62<;+A+:7?;.:*6-%
,766.,<.-?2<1")
2;,758*<2+4.?2<1%
'.:7:4*<.:
2;,758*<2+4.?2<1%
'.:7:4*<.:
%12;/=6,<276,*6+.;.<764A76<1.$2584.:.57<.,76<:744.:%12;/=6,<276,*667<+.=;.-?2<1<1.$2584.:.57<.,76<:744.:
=<<1.>*42-2<A7/<12;/=6,<276?2<1<1.$2584.:.57<.,76<:744.:-.8.6-;76<1.26-77:=62<57-.4*6-<1.:.*:.87;;2+242<2.;<1*<<12;/=6,<276,*6+.=;.-?2<1<1.5
Individual
Remote Controller
Wired MA remote controller PAR-30MAA
NEW
Wired MA remote controller PAR-21MAA
• Backlit LCD (Liquid Crystal Display)
Large, easy-to-see display
Full-dot LCD display with large characters for easy viewing
Contrast also adjustable
• Auto Return
Function to return the set temperature to the originally preset
temperature after certain amount of time
Auto return can be set respectively for cooling operation and
for heating operation.
Time can be set to a value from 30 and 120 in 10-minute
increments.
• Night Setback
To prevent indoor dew or excessive temperature rise, this
control starts heating operation when the control object group
is stopped and the room temperature drops below the preset
lower limit temperature. Also, this control starts cooling
operation when the control object group is stopped and the
room temperature rises above the preset upper limit temperature.
• Dimensions: 120(W) x 120(H) x 19(D) mm
[Advanced Functions]
• Error information • Timer
• Operation lock
• Temperature range restriction
• Language selection
Example of system configuration
12)6
2C
!B
2C
!B
1(
D
D5
EE*
D9
@
7%2**
=
5
=@
A
2
B;
=B
<
D4
B>>
>
D0
B
D4
=>=
>=
2**
D5
<=<
<
<<
D
' "9 !, &
'$ %9#!""!,"#
1(
New display-Larger,easier-to-see
characters
/3
8
24
35
%! $&"
)
)
%!#
Example of system configuration
' (
$!# &%
"
Dot Liquid Crystal Display (LCD)
The dot liquid crystal display enables quick
understanding of the operation state.
M-NET
Non-polarized
2-wire
Non-polarized
2-wire
MA remote controller
MA remote controller
Multi-language Display
45
"
,5
+
In addition to English, contents can be displayed
in seven other languages.
$
5
!
5
%
$
5
*It’s not possible to connect two 30MAA (Main/Sub) to one indoor unit.
Multi-language Display Example
Heating
'44
043
Room temp.
21°C
Heating
ON
Heating
OFF
Setback operation starts
when the indoor
temperature drops below
the lower limit during
setback control time.
Setback operation stops
-when the indoor temperature rises 3°C
above the lower limit
OR
-when the control time is over
#
Lower limit temp.
12°C
Night setback operation
#
Setback control time
!
/
Cooling
Upper limit temp.
28°C
,2
#6
3
Night setback operation
)
2
Cooling
5
7 OFF
Cooling
Room temp.
24°C
ON
Setback operation starts
when the temperature
exceeds the upper limit
during setback control time.
Setback operation stops
-when the temperature drops -3°C
below the upper limit
OR
-when the control time is over
-
,
35
7
.3
45
2
"
,5
+
!
5
%
Individual
Remote Controller
Wired ME remote controller PAR-F27MEA
Wireless remote controller PAR-FL32MA / PAR-FA32MA
• This remote control requires non-polar wiring to only one
indoor unit.
• Group operation over multiple outdoor units is possible.
Grouping can be changed without re-wiring, which makes
dividing rooms for tenants easier.
• Timer operation
*Daily timer operation of one ON/OFF setting everyday
*Auto-off timer : 0:30, 1:00, 1:30, 2:00...4:00
*The setting is kept in nonvolatile memory.
• Function lock
All functions or all functions except ON / OFF can be selected.
• Set temperature range limit
• Interlock setting and operation of LOSSNAY
• Dimensions:130(W) x 120(H) x 19(D) mm
:5-1/8(W) x 4-23/32(H) x 3/4(D) in.
• LCD temperature setting and display in 1°F increments.
Example of system configuration
PAR-FL32MA
PAR-FA32MA
PAR-SA9FA
(4-way Cassette signal receiver)
Example of system configuration
ME R/C
Signal
receiving
unit
ME R/C
Simple remote controller PAC-YT51CRB (MA)
Non-polarized
2-wire
Signal
receiving
unit
• Control: START/STOP, room temperature, fan speed, and
operation mode
• The only wiring required is cross-over wiring based on
two-wire signal lines.
• Room temperature sensors are built-in.
• LCD temperature setting and display in 1°C /1°F increments.
• Set temperature range limit
• Can operate all types of indoor units
*Since this controller has limited functions, it should always be
used in conjunction with standard controller or centralized
controller.
• Dimensions:70(W) x 120(H) x 41(D) mm
:2-3/4(W) x 4-23/32(H) x 1-5/8(D) in.
PAC-YT51CRB
Example of system configuration
Centralized
controller
24VDC
Power supply unit
(PAC-SC51KUA)
Simple
MA R/C
Simple
MA R/C
Wireless
remote
controller
PAR-FA32MA
Nonpolarized
2-wire
PAR-SA9FA
Signal
receiving
unit
Wireless
remote
controller
PAR-FA32MA
Wireless
remote
controller
PAR-SA9FA
Correspondence table
receiver
PMFY-P VBM
PLFY-P VCM/ VLMD
PCFY-P VKM
PFFY-P VKM
PEFY-P VMR-E-L/R/ VMH
PFFY-P VLEM/VKM/VLRM/VLRMM
PEFY-P VMS1(L)
PEFY-VMA(L)
PLFY-P VBM-E
PKFY-P VBM-E
PKFY-P VHM/VKM
transmitter
PAR-FA32MA
PAR-FL32MA
PAR-SA9FA-E
Built-in
• No need to configure addresses for group
operation.
• Lit LED keeps you informed of operation blinking even gives you the error code via
the number of blinks.
• Can be used with the MA remote controller.
*When used in group configurations, wiring
between indoor units is required.
*Combining ME remote controller and/or
LOSSNAY remote controller in a group is not
possible.
• LCD temperature setting and display in 1°C
/1°F increments.
• Dimensions:58(W) x 159(H) x 19(D) mm
:2-5/16(W) x 6-5/16(H) x 3/4(D) in.
Advanced
Touch Controller
With our new Advanced Touch Controller AT-50A, easy and simple operation on the touch panel offers an
optimal air environment for individual unit.
Touch controller AT-50A
NEW
New Functions
System structure
M-NET
M-NET
M-NET
adapter
AT-50A
Power supply unit
PAC-SC51KUA-J
Three in One
Night setback function
%""%, $)')*'(' $)') $)%
/%$)'%"*&)% $%%'*$ )('%#%$"%) %$
/,!".&'%'##") #' $")%%$)'%"*&)%
$%%'*$ )(
/%$)'%"*&)%*$ )('%*&(% '%$ ) %$'(
Weekly and daily schedule
(*$) %$""%,(+ $),%)#&')*'()) $)%
!&)( ''%%#)#&')*',$)*$ )('$%)
$%&') %$$*' $)) #) (*$) %$ () +
*$ )*)%#) "".()')() $%%" $%&') %$
,$))#&')*''%&("%,' ((%+)
&'()"%,'*&&'" # ))#&')*' ( ($%)%$".%'
%#%')$+ '%$#$)*)"(%%'(+ $$'.
&))'$(%%$.$
&))'$(%,!".(*"
()) $(#-&'&))'$
,%).&(%,!".(*"$()
Main system controller/Sub system
controller
A Control
General Equipment
DIDO Controller
Dimensions: 180(W) x 120(H) x 30(D) mm
: 7-2/16(W) x 4-12/16(H) x 1-3/16(D) in.
Lossnay
System changeover
&') %$#%$(, )&$ $%$ $%%'
)#&')*'()) $$)'))#&')*'%'%*&%'
'&'($)) + $%%'*$ )
New Design
$())%*.()#%$)'%""'
$%$$) $#*") &"(.()#%$)'%""'(( $)
)(.()#%$)'%""', )#$.*$) %$(() $
$())(.()#%$)'%""'(, ),*$) %$(()
*
Simple button arrangement
Backlit LCD (Liquid Crystal Display) Touch Panel
5-inch color LCD touch panel enables easy and simple operation.
The backlight lights up when the panel is touched, and lights off after certain period of time.
The touch panel displays the operation status of the units in GRID, LIST or in GROUP.
Functions
[Basic Functions]
/;/&') %$#%(, ) $
/#&')*'()) $/$(&()) $
/ '"%, ') %$()) $/:%*+'()) $
*$) %$
$)*$) %$*))%$$
()('*$*))%$%)%""%, $%"") +%&') %$
)!*"&') %$%#&')*'
%'') %$#%)%$)'%""''% ) %$
Advanced Functions
25*$ )‫ޓ‬25'%*&‫ޓ‬26'%*&%'%"") +2;%)+ ""
GRID (zoom-out) screen
Displays the operation status
of all groups.
GRID (zoom-in) screen
Displays the detailed
operation status of each
group.
Item
'# )'% )
&') %$"%!
5''%' (&".
=$) ") %$ $&$$)
LIST screen
GROUP screen
Displays the detailed
operation status of each
group with group name.
Displays the detailed operation
status of each group.
Sets group operations.
=$) ") %$ $)'"%!
#&')*'()
" # )) %$
& #%%&') %$
&'% )%%" $&'% )
) $&'% )%%" $
) $&'% )
Description
Operations Display
;%&') %$#%()) $)#&')*'$ ")'( $'()%&') %$(*( $)"%"'#%)%$)'%""'(
$&'% )
$".;$ ")''()$&'% )%'):;?'%*&
%&') %$"%!$())%) $&*)%&') %$%
5*))%$$()*$) %$3*))%$
*$) %$3*))%$%"") +;%*$"
5*$) %$$()&') %$#%)) $)#&')*'$(&$**))%$
&((,%'%')"%!'"($()
$$''%' (*''$)".%*'' $%$$ '%$ ) %$'*$ ))" )*$ )$)''%'%' (&".
0$$''%'%*'();:54"((%&') %$#%$ )%'('$(%,$%'#" %$%+')*$ )
>
''%'#%$ )%'('$(%,()$%'#"*$ )'(($''%'%''%'"%#%$ )%'('$(%,()
) #$))$%'#"*$ )'((''%'%$(%*'%)) %$
, )()#%3.&((7)'%+'.*)%%':;?'%*&(
:;?, ""'*$ $ $)'"%!, ))%&') %$% $%%'*$ )
#%$$%)$:54, "")*'$;*' $%&') %$)' $)'"%! $
3)()) $)%)#&')*''$" # ))%%" $) $$*)%#%
(*$) %$$$%)*(, ))'#%)%$)'%""'4&$(%$) $%%'*$ )#%"
$()()# $%$)'%""'%&') %$%)%""%, $#%(, ))"%"'#%)%$)'%""'($&'% )
$%%" $ (&'% )2%%" $'.*)%#) $$%)%($
$) $ (&'% )27) $*)%#) $$%)%($
$%%" $) $ (&'% )2%%" $'.) $*)%#) $$%)%($
5-)'$" $&*)
5#'$.()%& $&*))
%""%, $ $&*), )"+"( $"(%'&*"(( $"('+ ""
:+"( $"25#'$.()%& $&*)%'%"") +;
*"(( $"2%"") +;%':%"'#%)%$)'%""'&'% )&'# )
$ $&*)$(")'%#)%(%+
0$-)'$" $&*)%*)&*)&)'?1
7(%"(&')". ('@* '
".($4&%,'(*&&".%'%)'+ (#*()&'&'))( )
5-)'$"%*)&*)
5''%'%*)&*)%&') %$%*)&*)
;$''%'$%'#"'%*)&*), ))"+"( $"
0$-)'$" $&*)%*)&*)&)'?1
7(%"(&')". ('@* '
".($4&%,'(*&&".%'%)'+ (#*()&'&'))( )
! $)6(#%*$)
*"%&') %$
<() (*$) %$)%!%''' '$)"!'%#)%*)%%'*$ )
0$) (*$) %$ (*()(#%*$)! $*$) %$%)%*)%%'*$ )$$%)*(
(*$) %$ (%'8?<:8$?<? (-"*(' (%$".
!".(*"()) $*&)%
&))'$ (+ ""
8$%$&))'$*&)%
()) $%;&') %$#%)#&')*'$(& '"%, ') %$
$'# )'% )"%"%&') %$$(*"
Centralized
Remote Controller
One system controller can control up to fifty indoor units from one location. The PAC-SF44SRA also has
hardwired connection available (On/Off input, fire alarm input, run output, fault output).
System remote controller PAC-SF44SRA
Mitsubishi Electric controllers are complimented by a weekly programmable timer, being able to control up
to fifty indoor units. The PAC-YT34STA also has hardwired connection available (On/Off input, fire alarm
input, run output, fault output).
Schedule timer PAC-YT34STA
System Controller
UNITS
Max No.Units
ON/OFF
Run and stop operation
Switches between Cool/Dry/Auto/Fan/Heat.
Operation Mode will vary depending on the
indoor unit. Auto mode is available with only
R2 and WR2 systems
Sets the groups temperature control. Values in
parentheses are for the medium-temperature indoor unit.
Cool/Dry:19-30°C [14-30°C] / 67-87°F [57-87°F]
Heat
:17-28°C [17-28°C] / 63-83°F [63-83°F]
Auto
:19-28°C [17-28°C] / 67-83°F [63-83°F]
Models with 4 air flow speed settings: Hi/Mid-2/Mid-1/Low
Models with 3 air flow speed settings: Hi/Mid/Low
Models with 2 air flow speed settings: Hi/Low
Fan speed setting (including Auto) varies depending
on the model.
Air flow angles: 4-angle or 5-angle, Swing, Auto,
Louver ON/OFF
Run/Stop,Temperature Setting,Mode Selection
and Filter Reset functions can be prohibited.
Displays a 4 digit code and the affected
unit address
Allows the group to be interlocked with a heat
recovery Lossnay unit
On/Off/Fire Alarm
On/Off/Faults
MODE SELECTION
TEMPERATURE SETTING
FAN SPEED SETTINGS
• The group setting is kept in nonvolatile memory.
No need to worry about re-setting at power
failure.
• No individual AC power supply is needed.
The power can be supplied from one outdoor unit
(R410A) or Power supply unit.
Programmable Timer
DESCRIPTION
FUNCTION
AIR FLOW DIRECTION SETTING
PERMIT/PROHIBIT FUNCTION
ERROR INDICATION
VENTILATION INTERLOCK
EXTERNAL INPUT
EXTERNAL OUTPUT
PAC-SF44SRA
DESCRIPTION
FUNCTION
50 units/50 group
Operation Displays
UNITS
Max No.Units
ON/OFF
Content
SCHEDULE
FUNCTION
Number
Unit
CURRENT TIME
ERROR INDICATION
• The schedule group setting is kept in nonvolatile
memory. No need to worry about re-setting at
power failure.
• No individual AC power supply is needed.
The power can be supplied from one outdoor unit
(R410A) or Power supply unit.
EXTERNAL INPUT
EXTERNAL OUTPUT
Run and stop operation
On/Off
Mode:Cool/Heat/Auto
Set temperature:19°C to 28°C [67°F to 83°F]
Operation Prohibit: On/Off, Mode, Set temperature
Weekly timer for each group
9 setting patterns + no setting
16 operations per day
5 minutes
Set the time
Displays a 4 digit code and the affected
unit address
On/Off/Fire Alarm
On/Off/Faults
• Dimensions:130(W) x 120(H) x 19(D) mm
:5-1/8(W) x 4-23/32(H) x 3/4(D) in.
• Dimensions:130(W) x 120(H) x 19(D) mm
:5-1/8(W) x 4-23/32(H) x 3/4(D) in.
System example
System example
System
remote
controller
System
remote
controller
Power supply
unit
PAR-21MAA
Power supply
unit
LOSSNAY
PAR-F27MEA
PAR-21MAA
Schedule timer
LOSSNAY
PZ-52SF
LOSSNAY
LOSSNAY
PZ-52SF
PAR-21MAA
PAC-YT34STA
50 units/50 group
Operation Displays
Simple
PAC-SE51CRA
Centralized
Remote Controller
Just press a switch to start. All of the units can be On/Off by pressing the main switch, and each unit in
the group can be On/Off with individual switch. The PAC-YT40ANRA also has hardwired connection
available (On/Off input, fire alarm input, run output, fault output).
ON/OFF remote controller PAC-YT40ANRA
Group remote controller PAC-SC30GRA
DESCRIPTION
FUNCTION
UNITS
Up to 8 groups can be operated (maximum of 16 units). Just by pressing PAC-SC30GRA switches, groups can
be On/Off as a batch.
Suitable for small office and residential project.
PAC-YT40ANRA
DESCRIPTION
FUNCTION
50 units/16 groups
Max No.Units
PAC-SC30GRA
16 units / 8 groups
Max No.Units
UNITS
OPERATIONS DISPLAY
Run and stop operation
LED flashes during failure.
(The error code can be confirmed by removing
the cover.)
Group operation of only LOSSNAY units possible.
VENTILATION OPERATION
*Only ON/OFF of group.
(INDEPENDENT)
The LOSSNAY will run in interlock with the
operation of indoor unit.
VENTILATION OPERATION
*The fan rate and mode cannot be changed.
(INTERLOCKED)
The LED will turn ON only during operation after interlocking.
On/Off/Fire Alarm
EXTERNAL INPUT
On/Off/Faults
EXTERNAL OUTPUT
• Dimensions:130(W) x 120(H) x 19(D) mm
:5-1/8(W) x 4-23/32(H) x 3/4(D) in.
OPERATIONS DISPLAY
ON/OFF
ON/OFF
ERROR INDICATION
• The group setting is kept in nonvolatile
memory. No need to worry about re-setting at
power failure.
• No individual AC power supply is needed.
The power can be supplied from one outdoor
unit (R410A) or Power supply unit.
MODE SELECTION
TEMPERATURE SETTING
FAN SPEED SETTINGS
• The group setting is kept in nonvolatile
memory. No need to worry about re-setting at
power failure.
• No individual AC power supply is needed.
The power can be supplied from one outdoor
unit (R410A) or Power supply unit.
AIR FLOW DIRECTION SETTING
PERMIT/PROHIBIT FUNCTION
INDOOR RETURN AIR TEMPERATURE
ERROR INDICATION
VENTILATION INTERLOCK
Run and stop operation
Switches between Cool/Dry/Auto/Fan/Heat.
Operation Mode will vary depending on the
indoor unit. Auto mode is available with only
R2 and WR2 systems
Sets the groups temperature control.
Cool/Dry:19-30°C
Heat:17-28°C
Auto:19-28°C
4 speed – Hi-Mid2-Mid1-Low, Auto
3 speed – Hi-Mid-Low, Auto
2 speed – Hi-Low
Air flow angles: 4-angle or 5-angle, Swing, Auto,
Louver ON/OFF
Run/Stop,Temperature Setting, Mode Selection
and Filter Reset functions can be prohibited
via main system controller
Measures the intake temperature of the
master unit within the group
Displays a 4 digit code and the affected
unit address
Allows the group to be interlocked with a heat
recovery Lossnay unit
• Dimensions:130(W) x 120(H) x 19(D) mm
:5-1/8(W) x 4-23/32(H) x 3/4(D) in.
System example
Connect to the centralized transmission line
Group remote
controller
System example
LOSSNAY
Power supply
unit
PAR-F27MEA
PAR-21MAA
PAR-21MAA
PAR-21MAA
PAR-21MAA
PZ-52SF
ON/OFF
remote
controller
Connect to the indoor/outdoor transmission line
PAR-21MAA
PAC-YT51CRB
Group remote
Centralized
Remote Controller
With a new colored touch panel, and continuation of all the G-50A functions, AG-150A visualizes its
functions from basic control to advanced operations and bringing an ultimate controller to reality.
Centralized controller AG-150A
New Design
System structure
M-NET
Switching Hub
M-NET
adapter
LAN
(100BASE-TX)
M-NET
Remote
Monitoring PC
A Control
New Functions
Backlight color liquid crystal
Controllable units/groups
Backlight makes it easy to see and control units.
One can identify whether a unit is ON or OFF from a
distance.
Control in the night with no lights is possible.
Controls up to 50 units/groups (including indoor units,
LOSSNAY, DIDO/AI/PI controller)
Up to 150 units can be controlled via expansion
controller;PAC-YG50ECA (AG-150A software needs to be
upgraded)
AG-150A
Remote monitoring
via a Web browser
Touch panel
Power supply unit
(PAC-SC51KUA)
General Equipment
DIDO Controller (PAC-YG66DCA)
Hub
Temp/Humidity sensor
Dimensions: 300(W) x 185(H) x 70.3(D) mm
: 11-13/16(W) x 7-5/16(H) x 2-13/16(D) in.
AI Controller (PAC-YG63MCA)
Lights
Ventilation
Watt hour meter
PI Controller (PAC-YG60MCA)
Monitoring functions
Touch panel enables operation of units by touching with
index finger.
When object unit is touched, orange box appears around
the unit icon indicating the unit selected.
Temperature/Humidity (using AI controller with WEB
browser) *1
General equipment such as lights on LCD (using DIDO
controller)
Interlock function from AI controller, DIDO controller to
indoor units and between DIDO units are available.
AG-150A interlock with DIDO controller or free contact on
an indoor unit available. * Ver. 2.30 or later
M-NET
Hub
Central Control PC
(TG-2000A)
*Ver. 6.10 or later
Flat back
AG-150A / GB-50ADA
VPN Modem
Router
Option : Black surface cover
PAC-YG71CBL
9 inch wide, high-resolution
Modem
Internet
Easy installation
Service company
/Sales office
VPN
Router
Mobile phone
of service person
Remote
monitoring PC
Remote monitoring
via a Web browser
Note : Use a security device such as a VPN router when connecting the
AG-150A/GB-50ADA to the Internet to prevent unauthorized access.
Allows for an installation of the unit either directly to the
wall surface or using the installation hole in the wall.
Energy saving functions
USB memory compatible
All measurement/initial setting CSV data extractable with
USB memory.
Can save and overwrite setting data.
Expansion Controller PAC-YG50ECA
Seasonal scheduling and automatic switch over *1
Yearly scheduling on LCD *1
Scheduling fan speed and airflow direction
Optimized Start up *1
External temperature interlock control *1
Night setback control *1
*1 License required.
Functions
With a connection of a Expansion Controller, maximum of 150 units/groups
can be connected to AG-150A.
50 units/groups or 150 units/groups via expansion controller; PAC-YG50ECA.
System structure
Power supply unit
(PAC-SC51KUA)
Dimensions: 250(W) x 217(H) x 97.2(D) mm
: 9-7/8(W) x 8-9/16(H) x 3-7/8(D) in.
LAN
(100BASE-TX)
Auto mode is for CITY MULTI R2 and WR2 series only.
PAC-YG50ECA
AG-150A
PAC-YG50ECA
Central Control PC
(TG-2000A)
PAC-YG50ECA
*Do not connect PAC-YG50ECA to TB3 of the outdoor unit.
*Use a security device such as a VPN router when connecting the AG-150A etc. to the Internet
to prevent unauthorized access.
Centralized
Remote Controller
Centralized controller GB-50ADA-J*
*GB-50ADA-J is indicated as GB-50ADA.
New
The Web Server Function enables Remote Operation or Scheduling
Via a Web Browser on a Personal Computer!
Up to 50 indoor units can be controlled!
Web Browser
Enables monitoring and operation of indoor units using a PC
with Microsoft® Internet Explorer (Ver.6 or 7 or 8) (Web browser
function is an optional and needs license registration.)
GB-50ADA (without display)
PI Controller PAC-YG60MCA
*When connecting to the Internet, please use the VPN (Virtual Private
Network).
• Dimensions:250 (W) x 217 (H) x 97.2 (D) mm
:9-7/8 (W) x 8-9/16 (H) x 3-7/8 (D) in.
No more PLCs are needed!
Our new PI controller makes it possible to perform energy
saving without PLC, which is cost saving.
Maximum of 4 measurement meter (WHM, gas meter, water
meter, calorie meter) can be connected to the PI controller
and can be used also for charge calculation.
Using “Dial-up Connection”
• Enables monitoring and operation from a remote place
• Enables error notification by e-mails to a PC or to a mobile phone
Description
Function
*24 VDC power needs to be provided on site.
GB-50ADA (web browser)
Controllable unit
Dimensions W x H x D
ON / OFF
Mode selection
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in.
Up to 50 units/groups.
250 (9-7/8) x 217 (8-9/16) x 97.2 (3-7/8) mm (in)
Run and stop operation for the air conditioner units
Switches between Cool / Dry / Auto / Fan / Heat.
Range of temperature setting
Cool/Dry :19-30°C [14-30°C] / 67-87°F [57-87°F]
Heat
:17-28°C [17-28°C] / 63-83°F [63-83°F]
Auto
:19-28°C [17-28°C] / 67-83°F [63-83°F]
Temperature setting
( ) in case of using middle-temperature on PEFY, PEFY-VML/VMR/VMS/VMH-by setting DipSW7-1 to ON. Yet, PEFY-P-VMH-E-F is excluded.
Air flow direction setting
Timer operation / Schedule
Permit / Prohibit function
Indoor unit intake temperature
Error
Test run
Ventilation interlock
*Range of temperature settings vary depending on model.
Air flow direction angles, 4-angle or 5-angle Swing, Auto (Louver cannot be set)
Annaul/Weekly (2 types)/today schedule can be set for each group of air conditioning units.
Optimized startup setting is also available.
Individually prohibit operation of each local remote control function
Measures the intake temperature of the indoor unit only when the indoor unit is operating.
When an error is currently occurring on an air conditioner unit, the afflicted unit and the error code are displayed.
Operation of indoor groups or general equipment can be interlocked by the change of state (ON/OFF, mode, error of indoor groups
and general equipment).
*NOTE: Operation and displayed content vary depending on the indoor unit model.
License registration is necessary to perform each function on GB-50ADA.
System Structure
Remote monitoring via a
Web browser
LAN
Capacity
Energy Saving Control
Amount of saved energy
80%
Capacity
Value
To perform energy saving, the capacity of the outdoor unit is
controlled.
No energy-saving With energy-savining effects
effects
Time
*Please note that when using an energy saving control,
there are no warranties to failures such as usage over the contracted electricity.
System Structure
Remote monitoring via a
Web browser
GB-50ADA
HUB
Maximum Capacity at 80%
Enables Energy Saving Control with the use of our new PI controller.
(Registration of “Energy Save” licence is required.)
. Control level setting
. Monitors current state
AG-150A
LAN
M-NET
. Monitors demand level
M-NET
Registration of
“Energy Save” license
. Outdoor unit control
- Capacity control
(60/70/80/90%)
. Indoor unit control
- ± 2°C control
- Fan control
- Stop control
. Monitors electric power
Web license
Example of display icons (air conditioner icons)
Operation
In timer operation
Stop
Lossnay on
Occurrence of
abnormality
Under energy-saving
control
Router
PI controller
Provider
Operation/
Occurrence of a filter sign
Public telephone
line
Charge Calculation
Annual / Weekly Schedule
Enables charge calculation for each tenant and output as CSV file
Enables Weekly and Annual scheduling with a registering
license
System Structure
• ON/OFF, operation mode, temperature setting, prohibit remote
controller operation can be set.
• For annual schedule, it is possible to set 50 day-long settings up to
24 months into the future.
TG-2000A collects operation
and electric power data from
AG-150A and PI controller and
does apportion calculation.
Scheduling example in the office
8:00
(Start)
Watt-hour meter
Max. 4
Transmits abnormality mail.
AG-150A monitors every minute and
stores operation data necessary for
charging.
AG-150A
12:00
13:00
15:00
(Lunchtime)
(Energy saving)
17:00
M-NET
LAN
22:00
(Overtime)
ON
27°C [81°F] Cooling
29°C [84°F] Cooling
Registration of
“Charge Calculation” license
OFF
1 All operations
permitted
2 All operations
prohibited
3 Temperature
adjustment
4 All operations
permitted
5 Temperature
adjustment
6 All operations
prohibited
PI controller counts pulse output from
Watt-hour meter
PI controller
Centralized
Remote Controller
DIDO Controller PAC-YG66DCA
Integrated centralized control software TG-2000A
No more PLCs are needed!
Our new DIDO controller makes it possible to control
general-purpose equipment without PLC, which is cost saving.
Up to 6 general-purpose equipment can be connected to
the DIDO controller.
*24 VDC power needs to be provided on site.
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in.
Enables to control and monitor equipment other than air-conditioners (air-conditioners of other companies,
lights, ventilators, etc.)
System Structure
AG-150A
Energy
management
24VDC
Single-phase 208/230V
Power supply unit
PAC-SC51KUA
etc.
3-phase 208/230V
(3-wire)
AG-150A
LAN
M-NET
This device complies with Part15 of the FCC Rules.Operation is
subject to the following two conditions: (1)this device may not cause
harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
[ 24 VDC Power Supply]
PI Controller
(PAC-YG60MCA)
Indoor unit watt-hour meter
PLC (PAC-YG21CDA)
Outdoor unit system
watt-hour meter
The electric amount count software or separately
procured parts must be used with the designated PLC.
power source
Indoor unit system watt-hour meter
Uninterruptive
power supply (UPS)
DIDO controller
Icon display (Lights)
Lights
Security card reader
Error
Input
M-NET
Indoor unit system watt-hour meter
• In addition to above, the
air-conditioners can be interlocked
with general-purpose equipment.
E.g. Interlock between indoor units
and security system.
• The indoor units can be turned
ON/OFF when the security system
is activated/deactivated.
OFF
Single-phase 208/230V
*1
Web
monitor
license
Schedule
license
General-purpose equipment Control
ON
Example of Basic System Configuration
Personal computer for
TG-2000A
Indoor unit watt-hour meter
Outdoor unit system watt-hour meter
PLC (with electric amount count software)
AC of other companies
Schedule set
Integrated
centralized control
software installation
AI Controller PAC-YG63MCA
Our new AI controller makes it possible to monitor the values
measured by the temperature/humidity sensor connected to
the AI controller.
The AI controller has two input and two output channels.
*1 GB-50ADA can be used.
*24 VDC power needs to be provided on site.
The air-conditioning layout can be displayed
on the screen, making control and operation
easier.
Temperature/Humidity Monitoring
Monitors the values measured by the temperature/humidity
Dimension: 200(W) x 120(H) x 45(D) mm
: 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in. sensor connected to the AI controller
Temperature : Pt100, 4 to 20mA DC, 1 to 5 VDC, 0 to 10 VDC
Humidity : 4 to 20mA DC, 1 to 5 VDC, 0 to 10 VDC
• Trend displays of measurement data can be shown on a Web browser.
• An alarm can be output by e-mail when measurement data exceeds a preset upper or lower limit.
System Structure
Effective use of TG-2000A
Remote monitoring via a
Web browser
Multiple air conditioning charges in multiple buildings can be calculated. The power apportionment percentage
data and apportioned power rate can be calculated for each unit, and can be output as a CSV file.
AG-150A
LAN
M-NET
For example, installing TG-2000A to the system in the headquarters makes it possible to control AG-150A/GB-50ADA
units that are used in branch offices.
Temperature sensor
LONWORKS (LMAP02)
BACnet® (BAC-HD150)
CITY MULTI can easily combine into a Building Management System (BMS) via the LONWORKS and M-NET adapter LMAP02.
LONWORKS is an opened transmission protocol widely used at BMS, and related equipment control.
CITY MULTI is therefore compatible with large-scaled BMS management via LONWORKS .
CITY MULTI can easily combine into a Building Management System (BMS) via the BACnet® and M-NET adapter BAC-HD150. BACnet
is an opened transmission protocol widely used at BMS, and related equipment control. CITY MULTI is therefore compatible with
large-scaled BMS management via BACnet.
One LM ADAPTER unit can connect up to 50 Groups/50 indoor units.
Using a single LONWORKS adapter (LM ADAPTER), you can connect up to a maximum of 50 indoor units.
BAC-HD150 can control up to 50 units/groups (including LOSSNAY).
Up to 150 units/groups (including LOSSNAY) can be controlled from one BAC-HD150 with three expansion controllers
PAC-YG50ECA. (50 units/PAC-YG50ECA)
LMAP
LMAP 02
Protocol converter
between LONWORKS
and M-NET
LONWORKS
M-NET
LMAP
System example (Connection of 150 units / groups with PAC-YG50ECA)
CITY MULTI System
Central
monitor
BACnet® /IP
Example of System Configuration
BACnet® /IP
CITY MULTI
System design made simple through integration of
various devices into a total control configuration.
Outdoor unit
BMS
LAN1
LAN2
M-NET
M-NET
Outdoor unit
BAC-HD150
PAC-YG50ECA
HUB
LONWORKS
(78kbps)
M-NET
ME remote
controller
ME remote
controller
PAC-SC51KUA
LAN
M-NET
LMAP
LOSSNAY unit
ME remote
controller
PZ-52SF
AG-150A
Indoor units
Max. 50 indoor units
Indoor units
Indoor units
Indoor units
Indoor units
M-NET
M-NET
M-NET
PAC-YG50ECA
Lighting
Center
control device
Remote
controller
Security
Remote
controller
Remote
controller
Remote
controller
Remote
controller
M-NET
M-NET
LON, LONWORKS and the Echelon logo are trademarks of Echelon Corporation registered in the United
States and other countries.
FUNCTION
Control
ON/OFF
Mode Operation
Setpoint Adjustment
Fan Speed Control
Permit/Prohibit
Emergency Stop
Monitoring
ON/OFF
Mode
Setpoint
Fan Speed
Permit/Prohibit
Alarm State
Room Temperature
Thermo ON/OFF
INTERFACE
CONTENT
Run/Stop
Cool/Dry/Heat/Auto/Fan
Cooling 19-30°C [67-87°F], Heating 17-28°C, [63-83°F], Auto 19-28°C [67-83°F]
Lo-Mi1-Mi2-Hi
On/Off,Mode,Setpoint
Run/Stop
Cool/Dry/Heat/Auto/Fan
Cooling 19-30°C [67-87°F], Heating 17-28°C, [63-83°F], Auto 19-28°C [67-83°F]
Lo-Mi1-Mi2-Hi
On/Off,Mode,Setpoint
–10-50°C [14-122°F]
On/Off
LOSSNAY unit
PAC-YG50ECA
LONWORKS
The building management system is connected to the CITY MULTI air conditioning system using LONWORKS , which is widely used on field
networks, allowing for an open network and savings in construction to face.
LONWORKS
ME remote
controller
ME remote
controller
ME remote
controller
PZ-52SF
BACnet® and M-NET adapter
FUNCTION
Operation
ON/OFF
Mode
Fan Speed
Airflow Direction
Set Temperature
Filter Sign Reset
Permit/Prohibit
Forced OFF
Monitoring
ON/OFF
Mode
Fan Speed
Air Direction
Set Temperature
Filter Sign
Permit/Prohibit
Indoor Temperature
Alarm Signal
Error Code
CONTENT
Run/Stop
Cool/Dry/Heat/Auto/Fan
Low-Mid1-Mid2-Hi
Horizontal- 60°-80°-100°swing
Cooling 19-30°C [67-87°F], Heating 17-28°C [63-83°F], Auto 19-28°C [67-83°F]
Normal/Reset
ON/OFF, Mode, Filter sign reset, Set temp.
Release/Effective
Run/Stop
Cool/Dry/Heat/Auto/Fan
Low-Mid1-Mid2-Hi
Horizontal- 60°-80°-100°swing
Cooling 19-30°C [67-87°F], Heating 17-28°C [63-83°F], Auto 19-28°C [67-83°F]
Normal/Reset
ON/OFF, Mode, Filter sign reset, Set temp.
Normal/Abnormal
2 Character code- Indicates all unit alarms
Wide selection of indoor units
Ceiling cassette (4-way air flow)
Page41 - Page42
Fresh Air Intake
Page55 - Page56
PLFY-P VBM-E
PLFY-P VCM-E
Model
P20
P25
P32
P40
P50
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
PEFY-P VMH-E-F
Model
P63
P80
P100
P125
Model
P80
P140
P200
P250
Capacity
7.1kW
9.0kW
11.2kW
14.0kW
Capacity
9.0kW
16.0kW
22.4kW
28.0kW
Ceiling cassette (2-way air flow)
Page43 - Page44
Ceiling suspended
Page57 - Page58
PLFY-P VLMD-E
I ndoor unit
PCFY-P VKM-E
Model
P20
P25
P32
P40
P50
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
Model
P63
P80
P100
P125
Model
P40
P63
P100
P125
Capacity
7.1kW
9.0kW
11.2kW
14.0kW
Capacity
4.5kW
7.1kW
11.2kW
14.0kW
Ceiling cassette (1-way air flow)
Page45 - Page46
Wall mounted
Page59 - Page60
PKFY-P VBM-E
Ceiling cassette type 4-way airflow
PMFY-P VBM-E
PKFY-P VKM-E
Ceiling cassette type 2-way airflow
Ceiling cassette type 1-way airflow
Ceiling concealed type
Fresh Air Intake type
Ceiling suspended type
PKFY-P VHM-E
Model
P20
P25
P32
P40
Model
P15
P20
P25
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
Capacity
1.7kW
2.2kW
2.8kW
Ceiling concealed
Page47 - Page54
P40
P50
3.6kW 4.5kW
P32
5.6kW
Floor standing / Floor mounted concealed
P63
P100
7.1kW 11.2kW
Page61 - Page66
Wall mounted type
PEFY-P VMR-E-L/R
Floor standing exposed
PEFY-P VMA(L)-E
PFFY-P VLEM-E
New
PFFY-P VKM-E
Floor mounted concealed type
PEFY-P VMS1(L)-E
BC controller
PEFY-P VMH(S)-E
Model
P15
P20
P25
P32
P40
P50
P63
Capacity
1.7kW
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
7.1kW
P125
P140
P200
P250
Model
P71
P80
P100
Capacity
8.0kW
9.0kW
11.2kW
14.0kW 16.0kW
22.4kW 28.0kW
PFFY-P VLRM-E
PFFY-P VLRMM-E
Model
P20
P25
P32
P40
P50
P63
Capacity
2.2kW
2.8kW
3.6kW
4.5kW
5.6kW
7.1kW
INDOOR UNIT
Ceiling cassette type
4-way airflow
PLFY-P VBM-E
PLFY-P VCM-E
Specifications
Power source
PLFY-P VBM
PLFY-P VCM
The new 4-way cassette VBM offers 72 different airflow patterns, making
it ideal for applications with ceilings up to 4.2 m (13-13/16ft) in height.
Compact body to match with 2 feets
(600mm) x 2 feets (600mm) ceiling
design (VCM)
570mm
*1
Cooling capacity
*1
*1
Heating capacity
*1
Cooling
Power
Heating
consumption
Cooling
Current
Heating
External finish Unit
(Munsell No.)
Panel
Dimension
Unit
HxWxD
Panel
Unit
Net weight
Panel
Heat exchanger
Type x Quantity
*2
Airflow rate
Fan
(Lo-Mid1-Mid2-Hi)
570mm
Motor
External static pressure
Type
Output
kW
BTU/h
kW
BTU/h
kW
kW
A
A
mm(in.)
mm(in.)
kg(lbs.)
kg(lbs.)
m3/min
L/s
cfm
Pa
PLFY-P32VBM-E PLFY-P40VBM-E PLFY-P50VBM-E PLFY-P63VBM-E PLFY-P80VBM-E PLFY-P100VBM-E PLFY-P125VBM-E
1-phase 220-240V 50Hz / 1-phase 200V 60Hz
9.0
11.2
3.6
4.5
5.6
7.1
14.0
38,200
30,700
12,300
15,400
19,100
24,200
47,800
12.5
10.0
4.0
5.0
6.3
8.0
16.0
42,700
34,100
13,600
17,100
21,500
27,300
54,600
0.15
0.07
0.03
0.05
0.04
0.16
0.14
0.06
0.02
0.04
0.03
0.15
1.00
0.51
0.22
0.36
0.29
1.07
0.94
0.43
0.14
0.29
0.22
1.00
Galvanized steel sheet
White (6.4Y 8.9/0.4)
298 x 840 x 840 (11-3/4 x 33-1/8 x 33-1/8)
258 x 840 x 840 (10-3/16 x 33-8/1 x 33-8/1)
35 x 950 x 950 (1-3/8 x 37-7/16 x 37-7/16)
27 (60)
23 (51)
22 (49)
6 (13)
Cross fin (Aluminum plate fin and copper tube)
11-12-13-14
12-13-14-16
183-200-217-233
388-424-459-494
200-217-233-267
424-459-494-565
0.050
kW
Air filter
Refrigerant
pipe diameter
Automatic Air Speed Adjustment
Auto-fan-speed mode enables speedy and
comfortable heating during heating startup.
The Auto-fan-speed mode is added to the
usual four steps “Low, Mid1, Mid2, High.”
The Auto-fan-speed mode enables speedy
and comfortable air conditioning because the
air flow speeds up when starting, and air flow
slows down when the air conditioning
becomes stable. (PLFY-P VBM-E ONLY)
Controls the four fan speed modes automatically
Low
Mid1
Mid2
High
Auto
* When using a wireless remote controller, initial settings are
required.
Draft-less Air Distribution
The horizontal blow mode* newly employed
supplies airflow horizontally not bringing
cooled/warmed air directly to occupants thus
preventing discomfort sensation due to
excessive cooling or direct exposing of
occupants to the air blow.
(PLFY-P VBM-E ONLY)
Wide Air Flow
(PLFY-P VBM-E ONLY)
Cooling softly with Wide Air Flow
Discharge air reaches wider area and the fan
speed is decreased by 20% thanks to the new
wide shape air outlet.
Conventional model
New model
“i-see sensor” can be used with
ceiling cassette type 4-way airflow
unit. (Option PAC-SA1ME-E, PLFYVBM-E ONLY)
New 4-way Cassette PLFY-VBM controls the
temperature difference at the top and bottom in
a room by checking the floor temperature with
“i-see sensor”. Comfortable air conditioning can
be realized smoothly with “sensible temperature
control.” (Option PAC-SA1ME-E, PLFY-VBM-E
ONLY)
Prevents overcooling/overheating, and
improves comfort/energy-efficiency
in the industry
72 patterns of airflow to accommodate*On theFirstcommercial
air
conditioners (According to the
any room layout are available.
survey by Mitsubishi Electric)
The number of outlet can be set to 4, 3, or 2. Flexible airflow is
available by fixing the up-down airflow direction of the outlet
with a wired remote controller (or manually).
72 airflow patterns
4-, 3-, or 2- way outlet selection*
Without i-see sensor: preset temperature at 23°C
37°C
In heating
25°C
ø12.7 (ø1/2)
ø12.7 (ø1/2) / ø15.88 (ø5/8)
(Compatible)
Liquid
(Flare) mm(in.)
ø6.35 (ø1/4)
ø6.35 (ø1/4) / ø9.52 (ø3/8)
(Compatible)
Field drain pipe diameter
Sound pressure level
(Lo-Mid1-Mid2-Hi) *2 *3
27-28-29-31
Airflow rate * 2
(Lo-Mid-Hi)
The area that the ceiling
cassette without
“i-see sensor” can monitor.
External static
pressure
Motor
Type
Output
Horizontal blow
*Default
*The ceiling may be smudged at a spot where the supplied
airflow is seriously disturbed.
Fixed
Auto-fan-speed mode of
4-way Cassette with
“i-see sensor” heats the
floor well and decreases
the temperature
difference at the top and
360°
8-9-10
8-9-10
8-9-11
8-9-11
L/s
cfm
133-150-167
283-318-353
133-150-167
283-318-353
133-150-183
283-318-388
133-150-183
283-318-388
Pa
kW
0 (direct blow)
0.011
Gas(Flare) mm(in.)
Liquid(Flare) mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid-Hi)
*2 *3
28-31-35
1-phase induction motor
0.015
0.02
PP Honeycomb (long life type)
ø12.7 (ø1/2)
ø6.35 (ø1/4)
O.D. 32 (1-1/4)
28-31-37
The area that the ceiling
cassette with
“i-see sensor” can monitor.
Notes:
2.7m
11.5m
4.5
15,400
5.0
17,100
0.06
0.06
0.28
0.28
m3/min
Suction temperature sensor
Feeling temperature
at 20°C (Bottom 20°C)
PLFY-P40VCM-E
17 (38)
3 (7)
13°C
Setting the air direction for each
outlet with wired remote controller
35-38-41-43
Cross fin (Aluminum plate fin and copper tube)
Turbo fan x 1
25°C
Draft-less air distribution
can be performed
by horizontal blow.
34-37-39-41
PLFY-P32VCM-E
1-phase 220-240V 50Hz
3.6
2.8
12,300
9,600
4.0
3,2
13,600
10,900
0.05
0.06
0.05
0.06
0.23
0.28
0.23
0.28
Galvanized steel sheet with gray heat insulation
White (6.4Y 8.9/0.4)
37°C
In heating
30-32-35-37
208 x 570 x 570 (8-1/4 x 22-1/2 x 22-1/2)
20 x 650 x 650 (13/16 x 25-5/8 x 25-5/8)
Refrigerant
pipe diameter
With i-see sensor+Auto fan speed: preset temperature at 20°C
28-29-30-32
15.5 (35)
3 (7)
Type x Quantity
Fan
ø9.52 (ø3/8)
PLFY-P25VCM-E
2.2
7,500
2.5
8,500
0.05
0.05
0.23
0.23
Air filter
* Optional parts air outlet shutter plate (PLFY-P VBM-E
ONLY) is required for 2 or 3 way outlet selection.
27-28-30-31
PLFY-P20VCM-E
kW
*1
*1
BTU/h
kW
*1
Heating capacity
*1
BTU/h
kW
Cooling
Power
consumption
kW
Heating
A
Cooling
Current
A
Heating
External finish Unit
(Munsell No.) Panel
mm(in.)
Unit
Dimension
Panel mm(in.)
HxWxD
kg(lbs.)
Unit
Net weight
kg(lbs.)
Panel
Heat exchanger
Cooling capacity
Suction temperature sensor
Preset temperature is
tended to be higher
than we need,
because heated air
rises to the ceiling.
dB(A)
ø15.88 (ø5/8) / ø19.05 (ø3/4)
(Compatible)
ø15.88(ø5/8)
O.D. 32 (1-1/4)
mm(in.)
Power source
13°C
Feeling temperature
at 20°C (Bottom17°C)
Gas
(Flare) mm(in.)
Turbo fan x 1
14-15-16-18
22-25-28-30
21-24-27-29
16-18-20-22
233-250-267-300 267-300-333-367 350-400-450-483 367-417-467-500
494-530-565-636 565-636-706-777 742-848-953-1024 777-883-989-1059
0
DC motor
0.120
PP Honeycomb
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating : Indoor 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
29-33-38
0.02
30-34-39
INDOOR UNIT
Ceiling cassette type
2-way airflow
PLFY-P VLMD-E
Specifications
PLFY-P20VLMD-E
*1
kW
Cooling capacity
*1 BTU/h
*1
kW
Heating capacity
*1 BTU/h
Power
Cooling
kW
consumption
Heating
kW
Cooling
A
Current
Heating
A
External finish Unit
(Munsell No.)
Panel
Dimension
Unit
mm (in.)
HxWxD
Panel mm (in.)
Unit
kg(lbs.)
Net weight
Panel
kg(lbs.)
Heat exchanger
Type x Quantity
Slim body of 290mm(11-7/16in.) height
Fan
Motor
Slim body - only 290mm(11-7/16in.) height
The slimline body is highly suitable for installation in narrow
ceiling spaces and for replacing obsolete air-conditioning
equipment in older buildings. The main unit is only 290mm(117/16in.) height.
Equipped with drain pump
mechanism as standard
The drain can be positioned anywhere up to 583mm(22-15/16in.)
from the ceiling's surface, providing greater freedom with long
cross-piping and allowing more versatility with piping layouts.
290mm
.)
(11-7/16in
Drain height
max. 583(22-15/16)
Main unit height - 290(11-7/16)
Ceiling surface
583
Terminal block on outside of main unit
makes wiring easier
mm (in.)
Compact unit and low noise level attained!
Fresh air directly taken in
Sound pressure level table (Standard static pressure) at 0Pa
dB(A)
Fresh air can be taken in to the main unit directly (optional
accessories needed.)
Capacity P20 P25 P32 P40 P50 P63 P80 P100 P125
Sound
High
33
36
37
39
39
42
46
pressure
Fan
Mid
30
33
34
37
36
39 42/44
Level
Speed
Low
27
29
31
32
33
36
PLFY-P25VLMD-E
PLFY-P32VLMD-E
1-phase 220-240V 50Hz / 1-phase 220-230V 60Hz
3.6
2.8
12,300
9,600
4.0
3.2
13,600
10,900
0.072 / 0.075
0.072 / 0.075
0.065 / 0.069
0.065 / 0.069
0.36 / 0.37
0.36 / 0.37
0.30 / 0.32
0.30 / 0.32
Galvanized steel plate
Pure white (6.4Y 8.9/0.4)
290 x 776 x 634 (11-7/16 x 30-9/16 x 25)
20 x 1080 x 710 (13/16 x 42-9/16 x 28)
Power source
40
Airflow rate *2
(Lo-Mid-Hi)
External static pressure
Type
Output
2.2
7,500
2.5
8,500
0.072 / 0.075
0.065 / 0.069
0.36 / 0.37
0.30 / 0.32
23 (51)
24 (53)
0
1-phase induction motor
0.015 (at 240V)
PP honeycomb fabric (long life type)
ø12.7 (ø1/2)
ø6.35 (ø1/4)
O.D.32 (1-1/4)
27-30-33
28-31-34
kW
kW
BTU/h
kW
BTU/h
kW
kW
A
A
mm (in.)
mm (in.)
kg(lbs.)
kg(lbs.)
7.0-8.5-10.5
117-142-175
247-300-371
6.5-8.0-9.5
108-133-158
230-283-335
Air filter
Refrigerant
Gas(Flare) mm(in.)
pipe diameter Liquid(Flare) mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure level 220V,240V dB(A)
(Lo-Mid-Hi) *2 *3 230V
dB(A)
*1
Cooling capacity
*1
*1
Heating capacity
*1
Cooling
Power
Heating
consumption
Cooling
Current
Heating
External finish Unit
(Munsell No.) Panel
Unit
Dimension
Panel
HxWxD
Unit
Net weight
Panel
Heat exchanger
Type x Quantity
Airflow rate *2
Fan
(P50~P100:Lo-Mid-Hi)
(P125:Lo-Mid2-Mid1-Hi)
External static pressure
Type
Motor
Output
Capacity
Sound
High
pressure
Fan
Mid
Level
Speed
PLFY-P125VLMD-E
5.6
19,100
6.3
21,500
0.082 / 0.086
0.075 / 0.080
0.41 / 0.43
0.35 / 0.38
PLFY-P63VLMD-E
PLFY-P80VLMD-E
PLFY-P100VLMD-E
1-phase 220-240V 50Hz / 1-phase 220-230V 60Hz
11.2
9.0
7.1
38,200
30,700
24,200
12.5
10.0
8.0
42,700
34,100
27,300
0.157 / 0.186
0.147 / 0.156
0.101 / 0.105
0.150 / 0.180
0.140 / 0.150
0.094 / 0.099
0.75 / 0.88
0.72 / 0.74
0.49 / 0.51
0.69 / 0.83
0.66 / 0.69
0.43 / 0.46
Galvanized steel plate
Pure white (6.4Y 8.9 / 0.4)
290 x 946 x 634 (11-7/16 x 37-1/4 x 25)
290 x 1446 x 634 (11-7/16 x 56-15/16 x 25)
20 x 1250 x 710 (13/16 x 49-1/4 x 28)
20 x 1750 x 710 (13/16 x 68-15/16 x 28)
27 (60)
47 (104)
44 (98)
28 (62)
14.0
47,800
16.0
54,600
0.28 / 0.28
0.27 / 0.27
1.35 / 1.35
1.33 / 1.33
7.5 (17)
12.5 (28)
m3/min
L/s
cfm
Pa
kW
0.020 (at 240V)
Air filter
Turbo fan x 2
15.5-18.5-22.0
17.5-21.0-25.0
258-308-367
292-350-417
547-653-777
618-742-883
0
1-phase induction motor
0.020 (at 240V)
0.030 (at 240V)
PP honeycomb fabric (long life type)
Refrigerant
pipe diameter
Low
<230V>
37
38
40
40
43
31
34
35
38
37
41 42/44
28
30
32
33
34
37
Gas
(Flare)
mm(in.)
ø12.7 (ø1/2)
Liquid
(Flare)
mm(in.)
ø6.35 (ø1/4)
Field drain pipe diameter mm(in.)
Sound pressure level 220V,240V dB(A)
dB(A)
(Lo-Mid-Hi) *2 *3 230V
31-34-37
32-35-38
32-37-39
33-38-40
The antibacterial long life filter does not require maintenance
for approximately a year.
Lighter panel and placing the electric board near the panel
make installation and maintenance easier. Also, the heat
Notes:
*1
0.078 x 2 (at 240V)
Synthetic fiber unwoven
cloth filter (long life)
ø9.52 (ø3/8)
O.D.32 (1-1/4)
33-36-39
34-37-40
Long life filter equipped as standard
Easy installation
Sirocco fan x 4
24.0-27.0-30.0-33.0
400-450-500-550
848-953-1,059-1,165
ø15.88 (ø5/8)
46
40
290 x 1708 x 606 (11-7/16 x 67-1/4 x 23-7/8)
20 x 2010 x 710 (13/16 x 79-3/16 x 28)
56 (124)
13.0 (29)
Cross fin
Turbo fan x 1
9.0-11.0-12.5
11.0-13.0-15.5
150-183-208
167-217-258
318-388-441
353-459-547
P20 P25 P32 P40 P50 P63 P80 P100 P125
34
29-33-36
30-34-37
PLFY-P50VLMD-E
<220V,240V>
dB(A)
4.5
15,400
5.0
17,100
0.081 / 0.085
0.074 / 0.079
0.40 / 0.42
0.34 / 0.37
6.5 (15)
Cross fin
Turbo fan x 1
m3/min
L/s
cfm
Pa
Power source
PLFY-P40VLMD-E
Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating : Indoor 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
36-39-42
37-41-43
40-42-44-46
(Lo-Mid2-Mid1-Hi)
INDOOR UNIT
Ceiling cassette type
1-way airflow
PMFY-P VBM-E
Specifications
PMFY-P20VBM-E
Power source
kW
*1
Cooling capacity
*1 BTU/h
kW
*1
Heating capacity
*1 BTU/h
Power
Cooling
kW
consumption
Heating
kW
Cooling
A
Current
Heating
A
External finish (Munsell No.)
Dimension
Unit
mm(in.)
HWD
Panel
mm(in.)
Unit
kg(lbs.)
Net weight
Panel
kg(lbs.)
Heat exchanger
Type
*2 m3/min
Airflow rate
Fan
L/s
(Lo-Mid2-Mid1-Hi)
cfm
External staticpressure
Pa
Type
Motor
Output
kW
Air filter
Refrigerant
Gas(Flare) mm(in.)
pipe diameter Liquid(Flare) mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid2-Mid1-Hi) *2 *3
Compact and lightweight body perfect for
limited ceiling space applications.
Compact size for smooth
installation and maintenance
2.2
7,500
2.5
8,500
0.042
0.042
0.20
0.20
6.5-7.2-8.0-8.7
108-120-133-145
230-254-283-307
27-30-33-35
PMFY-P25VBM-E
PMFY-P32VBM-E
1-phase 220-240V 50Hz / 1-phase 220V 60Hz
3.6
2.8
12,300
9,600
4.0
3.2
13,600
10,900
0.044
0.044
0.21
0.21
White (0.98Y 8.99/0.63)
230 x 812 x 395 (9-1/16 x 32 x 15-9/16)
30 x 1000 x 470 (1-3/16 x 39-3/8 x 18-9/16)
14 (31)
3 (7)
Cross fin (Aluminum plate fin and copper tube)
Line flow fan x 1
7.3-8.0-8.6-9.3
122-133-143-155
258-283-304-328
0
1-phase induction motor
0.028
PP Honeycomb fabric
ø12.7 (ø1/2)
ø6.35 (ø1/4)
O.D. 26 (1)
PMFY-P40VBM-E
32-34-36-37
33-35-37-39
Drain pump
Unit body size has been standardized for all
models at 812mm for easier installation.
Body weight is only 14kg for the main unit
and 3kg for the panel, making this unit one
of the lightest in the industry.
The drain can be positioned anywhere up to 600mm(23-5/8in.) from the ceiling's surface.
max.
600
(23-5/8)
Quiet operation
Newly developed airflow control technology
reduces noise level to only 27dB (P20VBM)
for industry-leading quiet performance.
max.
402
(15-7/8)
230
(9-11/16)
PMFY-VBM
198
(7-13/16)
mm (in.)
Sound pressure level table
Capacity
P20 P25 P32 P40
35
37
39
33
36
37
Mid 2
30
34
35
Low
27
32
33
High
Sound
pressure Fan
Mid 1
level
Speed
<220V,240V>
Notes:
*1
Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating : Indoor 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
4.5
15,400
5.0
17,100
0.054
0.054
0.26
0.26
7.7-8.7-9.7-10.7
128-145-162-178
272-307-343-378
INDOOR UNIT
Ceiling concealed type
Specifications
PEFY-P20VMR-E-L
PEFY-P VMR-E-L/R
Power source
Static Pressure
Width
Heating capacity
5Pa
640mm
25-6/32in.
Ultra
Low Noise
Cooling capacity
Piping connection
L model
R model
Power
consumption
Current
Problem solver for residential hotels, museums, libraries,
or hospitals where low noise is especially a must!
Key Card
Switch
Cooling
Heating
Cooling
Heating
kW
BTU/h
kW
BTU/h
kW
kW
A
A
2.2
7,500
2.5
8,500
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
External finish
Dimension Rear inlet mm (in.)
Bottom inlet mm (in.)
HxWxD
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
(Lo-Mid-Hi)
Fan
cfm
External static
Pa
*2
pressure
Type
Motor
Output
kW
Air filter
Refrigerant
mm(in.)
Gas
pipe diameter Liquid mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure 220V
dB(A)
level (Lo-Mid-Hi) 230V
*3 240V
Inlet
Access
door
*1
*1
*1
*1
Noise measurement point
Noise measurement point
Cooling capacity
Operable by key card switch
It is possible to operate / stop by taking a key card in and out.
Ultra low noise
Quiet indoor environment can be achieved with 21dB around
the bed and 22dB around the desk.
*The noise level may differ by the room size or the setting of the
unit.
Enables to install for symmetric design room
Energy saving
Left or right piping and control boxes are available depending
on the layout of each room. Plus, as in the above figure, easy
maintenance is possible from the access door in the bathroom.
*Seen from the front, the pipe and control box are on the right
side for -R models.
Energy saving can be realized by preventing us from failing to
switch off of the air conditioners with a centralized system when no
one is in the room.
Note: Compact and simple controllers, designed specifically to
control only start/stop, fan speed and temperature can be set in
each room for the occupants' enhanced individual comfort.
Easy Maintenance
Heating capacity
Power
consumption
Current
Cooling
Heating
Cooling
Heating
External finish
Dimension Rear inlet mm (in.)
Bottom inlet mm (in.)
HxWxD
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
(Lo-Mid-Hi)
Fan
cfm
External static
Pa
*2
pressure
Type
Motor
Output
kW
Air filter
Refrigerant
mm(in.)
Gas
pipe diameter Liquid mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure 220V
dB(A)
level (Lo-Mid-Hi) 230V
*3 240V
3.6
12,300
4.0
13,600
0.07 / 0.08
0.07 / 0.08
0.34 / 0.38
0.34 / 0.38
4.8-5.8-9.3
80-97-155
170-205-328
5
0.018
0.023
PP Honeycomb fabric (washable)
ø12.7 (ø1/2) Brazed
ø6.35 (ø1/4) Brazed
O.D. 26 (1)
20-25-33
21-26-35
22-27-33
20-25-30
21-26-32
22-27-30
PEFY-P20VMR-E-R
kW
BTU/h
kW
BTU/h
kW
kW
A
A
PEFY-P32VMR-E-L
1-phase induction motor
Power source
*1
*1
*1
*1
PEFY-P25VMR-E-L
1-phase 220-230-240V 50Hz / 1-phase 220-230V 60Hz
2.8
9,600
3.2
10,900
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
Galvanized
292 x 640 x 580 (11-1/2 x 25-1/4 x 22-7/8)
300 x 640 x 570 (11-7/8 x 25-1/4 x 22-1/2)
18 (40)
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 1
4.8-5.8-7.9
80-97-132
170-205-279
2.2
7,500
2.5
8,500
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
PEFY-P25VMR-E-R
1-phase 220-230-240V 50Hz / 1-phase 220-230V 60Hz
2.8
9,600
3.2
10,900
0.06 / 0.06
0.06 / 0.06
0.29 / 0.29
0.29 / 0.29
Galvanized
292 x 640 x 580 (11-1/2 x 25-1/4 x 22-7/8)
300 x 640 x 570 (11-7/8 x 25-1/4 x 22-1/2)
18 (40)
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 1
4.8-5.8-7.9
80-97-132
170-205-279
PEFY-P32VMR-E-R
3.6
12,300
4.0
13,600
0.07 / 0.08
0.07 / 0.08
0.34 / 0.38
0.34 / 0.38
4.8-5.8-9.3
80-97-155
170-205-328
5
1-phase induction motor
0.018
0.023
PP Honeycomb fabric (washable)
ø12.7 (ø1/2) Brazed
ø6.35 (ø1/4) Brazed
O.D. 26(1)
20-25-30
21-26-32
22-27-30
Drain pan and heat exchangers are washable from the access
door in the bathroom, making maintenance easy and cost
saving.
Notes:
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor 27°C (81°F) DB/19°C (66°F) WB, Outdoor 35°C (95°F) DB
Heating : Indoor 20°C (68°F) DB, Outdoor 7°C (45°F) DB/6°C (43°F) WB
20-25-33
21-26-35
22-27-33
INDOOR UNIT
Ceiling concealed type
Specifications
PEFY-P15VMS1(L)-E
PEFY-P VMS1(L)-E
Static Pressure
Height
5~50Pa
200mm
Power source
Width
Low Noise
7-28/32in.
790mm
31-1/8in.
Width
kW
*1
Cooling capacity
*1 BTU/h
kW
*1
Heating capacity
*1 BTU/h
Power
*3 Cooling
kW
consumption Heating
kW
A
Cooling
Current *3
Heating
A
External finish
Dimension
mm
HxWxD
In.
Net weight
*3 kg(lbs.)
Heat exchanger
Type x Quantity
m3/min
Airflow rate
Fan
L/s
(Lo-Mid-Hi)
cfm
Pa
External static press
type
Motor
kW
output
Air filter
mm(in.)
Refrigerant Gas
pipe diameter Liquid
mm(in.)
Field drain pipe diameter mm(in.)
Sound pressure level
(Lo-Mid-Hi)
dB<A>
(mesured in anechoic room)
Width
990mm 1,190mm
39in.
46-7/8in.
The ultra thin unit of 200mm offers increased flexibility, and is
particularly suitable for places where low noise operation is desired
from a slim line body.
1.7
5,800
1.9
6,500
0.05 [0.03]
0.03 [0.03]
0.42 [0.31]
0.31 [0.31]
5-6-7
83-100-117
176-212-247
22-24-28
PEFY-P20VMS1(L)-E PEFY-P25VMS1(L)-E PEFY-P32VMS1(L)-E PEFY-P40VMS1(L)-E PEFY-P50VMS1(L)-E PEFY-P63VMS1(L)-E
1-phase 220-240V 50Hz / 1-phase 220-240V 60Hz
3.6
4.5
2.2
2.8
5.6
7.1
12,300
15,400
7,500
9,600
19,100
24,200
4.0
5.0
2.5
3.2
6.3
8.0
13,600
17,100
8,500
10,900
21,500
27,300
0.07 [0.05]
0.07 [0.05]
0.05 [0.03]
0.06 [0.04]
0.09 [0.07]
0.09 [0.07]
0.05 [0.05]
0.05 [0.05]
0.03 [0.03]
0.04 [0.04]
0.07 [0.07]
0.07 [0.07]
0.50 [0.39]
0.56 [0.45]
0.47 [0.36]
0.50 [0.39]
0.67 [0.56]
0.72 [0.61]
0.39 [0.39]
0.45 [0.45]
0.36 [0.36]
0.39 [0.39]
0.56 [0.56]
0.61 [0.61]
Galvanized
200 x 790 x 700
200 x 990 x 700
200 x 1,190 x 700
7-7/8 x 31-1/8 x 27-9/16
7-7/8 x 39 x 27-9/16
7-7/8 x 46-7/8 x 27-9/16
24(53) [23(51)]
20(45) [19(42)]
28(62) [27(60)]
19(42) [18(40)]
Cross fin (Aluminium fin and copper tube)
Sirocco fan x 3
Sirocco fan x 2
Sirocco fan x 4
6-8-10
8-9.5-11
12-14-16.5
5.5-6.5-8
5.5-7-9
9.5-11-13
100-133-167
133-158-183
200-233-275
91-108-133
91-117-150
158-183-217
212-282-353
282-335-388
424-494-583
194-229-282
194-247-317
335-388-459
5-15-35-50
DC motor
0.096
PP Honeycomb fabric (washable)
ø15.88 (ø5/8) Brazed
ø12.7 (ø1/2) Brazed
ø9.52 (ø3/8) Brazed
ø6.35 (ø1/4) Brazed
O.D. 32 (1-1/4)
23-25-29
24-26-30
24-27-32
PEFY-P15VMS1(L)-E can only be connected to YHM and YJM outdoor units.
PEFY-P15VMS1(L)-E
PURY-P YHM, YJM
PUHY-P YHM, YJM
Changeable static pressure
The unit is made suitable for a variety of applications with its four static pressure settings of 5, 15,
35, 50Pa.
Ultra low height unit with 200mm (7-28/32in.) high
Ultra-narrow width of 790mm (P15-P32 models)
[990mm for P40,50 models / 1190mm for P63 models]
PUMY-P VHMA / VHMB
PUMY-P YHMA / YHMB
PQRY-P YGM
Can be installed easily in tight spaces, such as ceiling cavities or drop-ceilings.
PQHY-P YGM
PQRY-P YHM
PQHY-P YHM
790mm
Choice for drain pump
Drain pump is an optional part for the VMS1L, and
a standard for VMS1.
*For places where low noise operation is especially
required (i.e. Hotels), VMS1L (without drain pump)
is recommended.
Ceiling surface
200mm
More than 10mm
Low, middle, and high fan speed settings deliver
precise comfort.
More than 20mm
Changeable airflow rate
Access door
Make the access door at the appointed position properly
for service maintenance.
Reduced noise thanks to the use of newly
designed centrifugal fan and coil
Sound pressure level table (Standard static pressure) at 15Pa
dB(A)
PP Honeycomb fabric
Washable PP Honeycomb fabric filter as standard
Capacity
P15
P20
P25
P32
P40
P50
P63
Sound
High
pressure
Fan
Level Speed Mid
28
29
30
32
33
35
36
24
25
26
27
30
32
33
Low
22
23
24
24
28
30
30
Notes:
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling : Indoor : 27°CD.B./19°CW.B. (81°FD.B. / 66°FW.B.) Outdoor : 35°CD.B. (95°FD.B. )
Heating : Indoor : 20°CD.B. (68°FD.B.) Outdoor : 7°CD.B. / 6°CW.B. (45°FD.B. / 43°FW.B.)
Pipe length : 7.5m (24-9/16ft)
Height difference : 0m (0ft)
28-30-33
30-32-35
30-33-36
INDOOR UNIT
Ceiling Concealed Type
Specifications
PEFY-P20VMA(L)-E
Slim Body
35~150Pa Height 250mm
With precise control of indoor temperature while operating with
optimum energy usage, it offers a high-energy saving efficiency.
mm
in.
Net weight
kg(lbs)
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
Fan
(Low-Mid-High)
cfm
External static
Pa
pressure
*4
Dimension H x W x D
Air Inlet
(1) Rear inlet
kW
BTU/h
kW
BTU/h
kW
kW
A
A
(2) Bottom inlet
Motor
Air inlet
Type
Output
kW
2.2
7,500
2.5
8,500
0.06 [0.04]
0.04
0.53 [0.42]
0.42
250 x 700 x 732
9-7/8 x 27-9/16 x 28-7/8
23 (51) [22 (49)]
6.0 - 7.5 - 8.5
100 - 125 - 142
212 - 265 - 300
PEFY-P25VMA(L)-E
PEFY-P50VMA(L)-E
2.8
9,600
3.2
10,900
0.06 [0.04]
0.04
0.53 [0.42]
0.42
PEFY-P32VMA(L)-E
PEFY-P40VMA(L)-E
1-phase 220-230-240V 50 / 60Hz
3.6
4.5
12,300
15,400
4.0
5.0
13,600
17,100
0.07 [0.05]
0.09 [0.07]
0.05
0.07
0.55 [0.44]
0.64 [0.53]
0.44
0.53
Galvanized steel plate
250 x 700 x 732
250 x 900 x 732
250 x 700 x 732
9-7/8 x 27-9/16 x 28-7/8 9-7/8 x 27-9/16 x 28-7/8
9-7/8 x 35-7/16 x 28-7/8
23 (51) [22 (49)]
26 (58) [25 (56)]
23 (51) [22 (49)]
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 1
6.0 - 7.5 - 8.5
10.0 - 12.0 - 14.0
7.5 - 9.0 - 10.5
100 - 125 - 142
167 - 200 - 233
125 - 150 - 175
212 - 265 - 300
353 - 424 - 494
265 - 318 - 371
5.6
19,100
6.3
21,500
0.11 [0.09]
0.09
0.74 [0.63]
0.63
<35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150>
0.085
Air inlet
Air outlet
Air outlet
Compact Indoor Units
Drain Pump Option
For all models, unit height are unified to 250mm. Compared to the
previous model, the height size is reduced, allowing installation in
tight spaces, such as ceiling cavities or drop-ceilings.
The line-up consists of two types, models with or without a
built-in drain pump allowing more freedom in piping layout
design.
Power source
Cooling capacity
(Nominal)
Heating capacity
(Nominal)
Power
Cooling
consumption Heating
Cooling
Current
Heating
External finish
*1
*1
*2
*2
*3
*3
*3
*3
kW
BTU/h
kW
BTU/h
kW
kW
A
A
PEFY-P VMA-E Drain pump built-in
Reduction in height size
PEFY-P VMA(L)
Height mm
Width mm
Depth mm
20
25
700
32
40
50
900
63 71 80 100 125 140
250
1,100
1,400 1,600
732
PEFY-P VMAL-E No Drain pump
* Units with a "L" at the end of the model name
are not equipped with a drain pump.
External static pressure
Analogue input
Five-stage external static pressure settings provide flexibility for
duct extension, branching and air outlet configuration and are
adjustable to meet different application conditions.
Setting ranges to a maximum of 150Pa.
Analogue input allows unit to control the fan speed setting in
conjunction with damper condition.
External static pressure setting
Series
20 25 32 40 50 63 71 80 100 125 140
NEW PEFY-P VMA(L)
35/50/70/100/150Pa
0.085
0.085
6.35 (1/4) Brazed
6.35 (1/4) Brazed
12.7 (1/20) Brazed
12.7 (1/2) Brazed
O.D.32 (1-1/4)
6.35 (1/4) Brazed
9.52 (3/8) Brazed
12.7 (1/2) Brazed
15.88 (5/8) Brazed
O.D.32 (1-1/4)
26-28-29
23-25-26
28-30-34
23-26-29
28-30-34
23-27-30
28-32-35
25-29-32
PEFY-P63VMA(L)-E
PEFY-P71VMA(L)-E
7.1
24,200
8.0
27,300
0.12 [0.10]
0.10
1.01 [0.90]
0.90
8.0
27,300
9.0
30,700
0.14 [0.12]
0.12
1.15 [1.04]
1.04
IT terminal
PEFY-P80VMA(L)-E PEFY-P100VMA(L)-E PEFY-P125VMA(L)-E PEFY-P140VMA(L)-E
1-phase 220-230-240V 50 / 60Hz
9.0
11.2
16.0
14.0
30,700
38,200
54,600
47,800
10.0
12.5
18.0
16.0
34,100
42,700
61,400
54,600
0.14 [0.12]
0.24 [0.22]
0.36 [0.34]
0.34 [0.32]
0.12
0.22
0.34
0.32
1.15 [1.04]
1.47 [1.36]
2.21 [2.10]
2.05 [1.94]
1.04
1.36
2.10
1.94
Galvanized steel plate
250 x 1,100 x 732
250 x 1,400 x 732
250 x 1,600 x 732
250 x 1,400 x 732
9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 55-1/8 x 28-7/8
9-7/8 x 55-1/8 x 28-7/8
9-7/8 x 63 x 28-7/8
32 (71) [31 (69)]
42 (93) [41 (91)]
42 (93) [41 (91)]
46 (102) [45 (10)]
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 2
14.5 - 18.0 - 21.0
23.0 - 28.0 - 33.0
28.0 - 34.0 - 40.0
29.5 - 35.5 - 42.0
242 - 300 - 350
383 - 467 - 550
467 - 567 - 667
492 - 592 - 700
512 - 636 - 742
812 - 989 - 1,165
989 - 1,201 - 1,412 1,042 - 1,254 - 1,483
mm
250 x 1,100 x 732
250 x 1,100 x 732
in.
9-7/8 x 43-5/16 x 28-7/8 9-7/8 x 43-5/16 x 28-7/8
Net weight
kg(lbs)
32 (71) [31(69)]
32 (71) [31 (69)]
Heat exchanger
Type x Quantity
m3/min
13.5 - 16.0 - 19.0
14.5 - 18.0 - 21.0
Airflow rate
L/s
225 - 267 - 317
242 - 300 - 350
Fan
(Low-Mid-High)
cfm
477 - 565 - 671
512 - 636 - 742
External static
Pa
<35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150>
pressure
*4
Type
DC motor
Motor
Output
0.121
0.121
0.121
0.244
0.244
0.244
kW
Air filter
PP honeycomb fabric.
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
Liquid (R410A)
mm(in.)
Refrigerant
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
9.52 (3/8) Brazed
(R22,R407C)
pipe diameter Gas (R410A)
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
mm(in.)
15.88 (5/8) Brazed
15.88 (5/8) Brazed
15.88 (5/8) Brazed
19.05 (3/4) Brazed
19.05 (3/4) Brazed
19.05 (3/4) Brazed
(R22,R407C)
Field drain pipe diameter mm(in.)
O.D.32 (1-1/4)
O.D.32 (1-1/4)
O.D.32 (1-1/4)
O.D.32 (1-1/4)
O.D.32 (1-1/4)
O.D.32 (1-1/4)
Sound pressure level (measured in anechoic room)
(Low-Mid-High) *3 *5 dB(A)
29-32-36
30-34-38
30-34-38
32-37-41
35-40-44
36-41-45
*3 *6 dB(A)
25-29-33
26-29-34
26-29-34
28-33-37
32-36-40
33-37-42
Notes:
*
*1
*2
IT terminal is available. For details, contact your local distributor.
<35> - 50 - <70> - <100> - <150> <35> - 50 - <70> - <100> - <150>
6.35 (1/4) Brazed
6.35 (1/4) Brazed
12.7 (1/20) Brazed
12.7 (1/20) Brazed
O.D.32(1-1/4)
Dimension H x W x D
250mm
12.0 - 14.5 - 17.0
200 - 242 - 283
424 - 512 - 600
DC motor
0.085
PP honeycomb fabric.
6.35 (1/4) Brazed
6.35 (1/4) Brazed
12.7 (1/20) Brazed
12.7 (1/20) Brazed
O.D.32(1-1/4)
0.085
Air filter
6.35 (1/4) Brazed
Liquid (R410A)
mm(in.)
Refrigerant
6.35 (1/4) Brazed
(R22,R407C)
pipe diameter Gas (R410A)
12.7 (1/2) Brazed
mm(in.)
12.7 (1/2) Brazed
(R22,R407C)
Field drain pipe diameter mm(in.)
O.D.32 (1-1/4)
Sound pressure level (measured in anechoic room)
(Low-Mid-High) *3 *5 dB(A)
26-28-29
*3 *6 dB(A)
23-25-26
250 x 900 x 732
9-7/8 x 35-7/16 x 28-7/8
26 (58) [25 (56)]
*3
*4
[ ] is in case of PEFY-P VMAL-E
Nominal cooling conditions
Indoor: 27°CDB/19°CWB(81°FDB/66°FWB), Outdoor: 35°CDB(95°FDB)
Pipe length: 7.5m(24-9/16ft.), Level difference: 0m(0ft.)
Nominal heating conditions
Indoor: 20°CDB(68°FDB), Outdoor: 7°CDB/6°CWB(45°FDB/43°FWB)
Pipe length: 7.5m(24-9/16ft.), Level difference: 0m(0ft.)
The values are measured at the rated external static pressure.
The rated external static pressure is shown without < >.The factory setting
is the rated value.
*5
Measured in anechoic room with a 1m
air inlet duct and 2m air outlet
duct attached to the unit and 1.5m
below the unit.
Aux. duct
2m
1.5m
Middle Static Pressure
*1
*1
*2
*2
*3
*3
*3
*3
1m
Measurement location
*6
Measured in anechoic room with a 2m
air inlet duct and 2m air outlet
duct attached to the unit and 1.5m
below the unit.
Aux. duct
2m
5m
PEFY-P VMA(L)-E
Power source
Cooling capacity
(Nominal)
Heating capacity
(Nominal)
Power
Cooling
consumption Heating
Cooling
Current
Heating
External finish
2m
INDOOR UNIT
Ceiling concealed
type
PEFY-P VMH(S)-E
Specifications
PEFY-P40VMH-E
New
Power source
Cooling capacity
Heating capacity
High Static Pressure
Power
consumption
Increased design flexibility from sufficient external static pressure
allows authentic duct air- conditioning with an elegant interior layout.
Current
*1
*1
*1
*1
Cooling
Heating
Cooling
Heating
kW
BTU/h
kW
BTU/h
kW
kW
A
A
External finish
mm
in.
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
(Lo-Hi)
Fan
cfm
External static 220V
Pa
pressure *2 230,240V
Pa
Type
Motor
Output
*3
kW
Air filter (option)
Gas
mm(in.)
(Brazing)
Refrigerant
pipe diameter Liquid
mm(in.)
(Brazing)
Field drain pipe diameter mm(in.)
dB(A)
Sound pressure 220V
level (Lo-Hi) *6 230,240V dB(A)
Dimension H x W x D
+2#-.+0-!#
High static pressure of 200 Pa or higher
One-side maintenance
The additional external static pressure capacity provides flexibility
for duct extension, branching and air outlet configuration.
PEFY-P VMH-E
External
static
pressure
(Pa)
P40 P50 P63 P71 P80 P100 P125 P140 P200 P250
220V
50/100/200
230/240V
100/150/200
380V
110/220
400/415V
130/260
PEFY-P VMHS-E
P200
P250
<50> – <100> – 150 – <200> – <250>*
External static pressure (Pa)
*The rated external static pressure is shown without < >.
The factory setting is the rated value.
++('*%! , !'/4
# /'*%! , !'/4
All maintenance to the unit, including
fan inspection and fan motor removal,
can be conducted from the inspection
opening on one side.
(VMH model only)
++('*%
# /'*%
6
6
6
0--#*/
6
# /'*%
6
6
83/#-* ($'*'.&
+2#-
!+*.0),/'+*
++('*%
The introduction of an upper drain pump allows the drain connection to
be raised as high as 550mm(21-11/16in.) for VMH model/700mm
(27-9/16in.) for VMHS model, allowing more freedom in piping layout
design and reducing horizontal piping requirements.
Sound pressure level table (Standard static pressure 220V)
dB(A)
P50
P63
P71
P80
34
38
39
41
27
32
32
35
P100 P125 P140
42
34
42
34
42
34
C
@&
C
@&
C
C
7
7
7
7
))
'*
C%(B.
<#/2#'%&/
# /#3!& *%#4,#3=0 */'/4
))'*
7'-$(+2- /#
:.
!$)
))'*
:+6;'"6'
:.
*
!$)
83/#-* (./ /'! ,-#..0-#
))
4,#
;+/+0/,0/
C
7'-$'(/#-+,/'+*
9 .
))'*
- E'*%
>#$-'%#- */
,',#"' )#/#- :'D0'"
))'*
- E'*%
'#(""- '*,',#"' )#/#- ))'*
"7
?+0*",-#..0-#
"7
(#1#(
:+6;'"6' "7
')#*.'+*33
Drain pump (option) ensures up to 550mm (21-11/16in.)
for VMH model / 700mm (27-9/16in.)
for VMHS model of lift
Reduced noise thanks to the use of
newly designed centrifugal fan
Capacity
P40
Sound
High 34
pressure Fan
Level Speed
Low
27
MAX.
550
(21-11/16)
222
(8-3/4)
(700 (27-9/16) for
328
VMHS model) (12-15/16)
mm (in.)
PEFY-P50VMH-E
PEFY-P63VMH-E PEFY-P71VMH-E PEFY-P80VMH-E PEFY-P100VMH-E PEFY-P125VMH-E PEFY-P140VMH-E
6,& .#
6
E6,& .#
6
E
11.2
9.0
8.0
14.0
7.1
16.0
38,200
30,700
27,300
47,800
24,200
54,600
12.5
10.0
9.0
16.0
8.0
18.0
42,700
34,100
30,700
54,600
27,300
61,400
0.32 / 0.40
0.26 / 0.33
0.48 / 0.58
0.24 / 0.30
0.48 / 0.59
0.32 / 0.40
0.26 / 0.33
0.48 / 0.58
0.24 / 0.30
0.48 / 0.59
1.47 / 1.83
1.20 / 1.51
2.34 / 2.66
1.12 / 1.38
2.35 / 2.70
1.47 / 1.83
1.20 / 1.51
2.34 / 2.66
1.12 / 1.38
2.35 / 2.70
Galvanized
380 x 1,200 x 900
380 x 750 x 900
380 x 1,000 x 900
15 x 47-1/4 x 35-7/16
15 x 29-9/16 x 35-7/16
15 x 39-3/8 x 35-7/16
44 (98)
70 (155)
45 (100)
50 (111)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 2
Sirocco fan x 1
18.0-25.0
15.5-22.0
26.5-38.0
10.0-14.0
13.5-19.0
28.0-40.0
300-417
258-367
442-633
167-233
225-317
467-667
636-883
547-777
936-1342
353-494
477-671
989-1413
50 · 100 · 200
100 · 150 · 200
1-phase induction motor
0.18
0.14
0.08
0.26
0.12
Synthethic fiber unwoven cloth filter (long life)
4.5
5.6
15,400
19,100
5.0
6.3
17,100
21,500
0.19 / 0.23
0.19 / 0.23
0.88 / 1.06
0.88 / 1.06
ø12.7 (ø1/2)
HH
ø9.52 (ø3/8)
ø6.35 (ø1/4)
27-34
31-37
32-38
36-41
O.D. 32 (1-1/4)
35-41
32-39
38-43
35-41
8A6
;68
8A6
;68
6,& .#6E<F6E
I
I
I
I
9 (1 *'E#"
3
3
63636
-+..$'*7(0)'*0),( /#$'* *"!+,,#-/0B#
?'-+!!+$ *3
I
I
I
I
I
I
G
G
I
I
6,& .#'*"0!/'+*)+/+ ?4*/&#/&'!$'B#-0*2+1#*!(+/&$'(/#-(+*%('$#
H
H
HH
34-42
38-44
8A6
;?68
8A6
;?68
6,& .#
6
E6,& .#
6
E
I
I
6
6 66 I
I
6
6 66 9 (1 *'E#"./##(,( /#
3
3
63636
-+..$'*7(0)'*0),( /#$'* *"!+,,#-/0B#
?'-+!!+$ *3
I
I
I
I
I
I
66
66
66
66
6
6
6
6
I
I
666
6
6
66
6
)+/+
?4*/&#/&'!$'B#-0*2+1#*!(+/&$'(/#-(+*%('$#$'(/#- *"$'(/#-B+3 -#-#!+))#*"#"
HH
H
H
6
I
I
H
H
H
H
6
I
I
66 I
I
6
6 Notes:
*1 Cooling/heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoo r: 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor : 7°C(45°F)DB/6°C(43°F)WB
*2 The external static pressure is set to 100Pa (at 220V) /150Pa (at 230, 240V) at factory shipment.
*3 The value are that at 240V.
*6 It is measured in anechoic room.
*7 The values are measured at the rated external static pressure.
*8 The rated external static pressure is shown without < >.
The factory setting is the rated value.
*9 It is measured at the rated external static pressure in anechoic room.
INDOOR UNIT
Fresh Air Intake Type
Specifications
Power source
PEFY-P VMH-E-F
*1
*1
*1
Heating capacity
*1
Cooling
Power
consumption Heating
Cooling
Current
Heating
External finish
Dimension
HxWxD
Net weight
Heat exchanger
Type x Quautity
Cooling capacity
Fresh
Air Intake
Fresh Air can be taken in with temperature control.
Ideal for Offices, Stores and Restaurants.
Airflow rate
Fan
External
static
pressure
(Lo-Mid-Hi)
Type
Motor
Output
Air filter (option)
208V
220V
230V
240V
kW
BTU/h
kW
BTU/h
kW
kW
A
A
mm(in.)
kg(lbs.)
m3/min
L/s
cfm
Pa
Pa
Pa
Pa
kW
PEFY-P80VMH-E-F
PEFY-P140VMH-E-F
1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz
9.0
16.0
30,700
54,600
8.5
15.1
29,000
51,500
0.16 / 0.21
0.29 / 0.33
0.16 / 0.21
0.29 / 0.33
0.67 / 0.91
1.24 / 1.48
0.67 / 0.91
1.24 / 1.48
Galvanized
380 x 1000 x 900
380 x 1200 x 900
(15 x 39-3/8 x 35-7/16)
(15 x 47-1/4 x 35-7/16)
50 (111)
70 (155)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 1
Sirocco fan x 2
9.0
18.0
150
300
18
636
35 - 85 - 170
35 - 85 - 170
40 - 115 - 190
50 - 115 - 190
50 - 130 - 210
60 - 130 - 220
80 - 170 - 220
100 - 170 - 240
1-phase induction motor
0.09 (at 220V)
0.14 (at 220V)
Synthetic fiber unwoven cloth filter (long life)
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
208,
220V
dB(A)
Sound pressure level
(Lo-Mid-Hi)
*2 230, 240V dB(A)
Power source
The Fresh Air intake indoor unit
can be installed in any place.
* Limits of capacity connectable to outdoor unit
Cooling capacity
Max. 110% of outdoor unit capacity, excepting heating at outdoor temperature of less than -5°C(23°F) (100%).
Heating capacity
The Fresh Air intake indoor unit can take
fresh outdoor air into any building in any
place at any time.
Example
Office, Lobby, Workshop,
Rest room, Nursing home,
Smoking corner,
Kitchen in restaurant
Outdoor
unit
Outdoor
unit
Supply air
Exhaust air
EA
Indoor
unit
Indoor
unit
Fresh Air
Intake Unit
Fresh air
OA
Fresh air
R/C
A/C
Fresh air
A/C
Fresh air
R/C
< Note>
Fan remains in operation during Thermo-OFF. Using this model with other type of
indoor unit is recommended to prevent cold draft which is caused due to intaken fresh
air.
kW
BTU/h
kW
BTU/h
kW
kW
A
A
Cooling
Power
consumption Heating
Cooling
Current
Heating
External finish
Dimension
mm(in.)
HxWxD
kg(lbs.)
Net weight
Heat exchanger
Type x Quautity
m3/min
L/s
Airflow rate
cfm
Fan
Pa
External 380V
Pa
400V
static
Pa
pressure 415V
Type
Motor
kW
Output
Air filter (option)
Gas
mm(in.)
Refrigerant
(Flare)
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
dB(A)
380V
Sound pressure
dB(A)
400V
level
*2
dB(A)
415V
ø15.88 (ø5/8)
ø9.52 (ø3/8)
O.D.32 (1-1/4)
27 - 38 - 43
33 - 43 - 45
28 - 38 - 43
34 - 43 - 45
PEFY-P200VMH-E-F
PEFY-P250 VMH-E-F
3-phase 380-415V 50Hz / 3N~ 380-415V 60Hz
22.4
28.0
76,400
95,500
21.2
26.5
72,300
90,400
0.34 / 0.42
0.39 / 0.50
0.34 / 0.42
0.39 / 0.50
0.58 / 0.74
0.68 / 0.86
0.58 / 0.74
0.68 / 0.86
Galvanized
470 x 1250 x 1120
(18-9/16 x 49-1/4 x 44-1/8)
100 (221)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 2
28
35
467
583
989
1236
140 / 200
110 / 190
150 / 210
120 / 200
160 / 220
130 / 210
3-phase induction motor
0.20
0.23
Synthetic fiber unmoven cloth filter (long life type)
ø19.05 (ø3/4)
ø22.2 (ø7/8)
ø9.52 (ø3/8)
O.D.32 (1-1/4)
39 / 42
40 / 43
40 / 44
40 / 44
40 / 45
41 / 46
Notes:
1. The cooling and heating capacites are the maximum capacites that were obitained by operating in the above air conditions and with a refrigerant pipe of about 7.5m.
2 .The actual capacity characteristics vary with the combination of indoor and outdoor units. See the technical infomation.
3 .The operating noise is the data that was obitained by measuring it 1.5m from the the bottom of the unit in an anechoic room. (Noise meter A-scale value)
4 .The figure of Electrical characteristic indicates at 240V 50Hz/230V60Hz (PEFY-P80, 140VHM-E-F type), at 220Pa setting at 415V (PEFY-P200, 250VMH-E-F type).
5 . When the 100% fresh air indoor units are connected, the maximum connectable indoor units to 1 outdoor unit are as follows
Heat pump models
Cooling only
110%(100% in case of heating below-5°C(23°F))
110%
6. Operational temp range is
(
)
Cooling : from 21°C(70°F)DB/15.5°C(60°F)WB to 43°C(109°F)DB/35°C(95°F)WB
Heating : from -10°C(14°F)DB to 20°C(68°F)DB
* Thermo off(Fan) operation automatically starts either when temperature is lower than 21°C(70°F)DB in cooling mode or when the temperature exceeds 20°C(68°F)DB in heating mode.
7. As the room temp in sensed by the thermo in the remote controller or the one in the room, be sure to use either remote controller or room thermo.
8. Autochangeover function or Dry mode is NOT available. Fan mode operation during the thermo off in Cooling/Heating mode.
9. In any case, the air flow rate should be kept lower than 110% of the above chart. Please see "Fan curves" for the details.
10. When this unit is used as sole A/C system, be careful about the dew in air outlet grilles in cooling mode.
11. Un-conditioned outdoor air such as humid air or cold air blows to the indoor during thermo off operation.
INDOOR UNIT
Ceiling suspended type
Specifications
PCFY-P40VKM-E
Power source
PCFY-P VKM-E
*1
*1
*1
*1
kW
BTU/h
kW
Heating capacity
BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsell No.)
mm
Dimension H x W x D
in.
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
*2 m3/min
Airflow rate
L/s
Fan
(Lo-Mid2-Mid1-Hi)
cfm
External static pressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid2-Mid1-Hi) *2 *3
Cooling capacity
Designed for ultra-quiet operation and easy maintenance,
provides exceptionally comfortable air-conditioning.
4.5
15,400
5.0
17,100
0.04
0.04
0.28
0.28
230 x 960 x 680
9-1/16 x 37-13/16 x 26-3/4
24(53)
Sirocco fan x 2
10-11-12-13
167-183-200-217
353-388-424-459
0.090
ø12.7 (ø1/2)
PCFY-P63VKM-E
PCFY-P100VKM-E
PCFY-P125VKM-E
1-phase 220-240V 50Hz / 1-phase 220V 60Hz
7.1
11.2
14.0
24,200
38,200
47,800
8.0
12.5
16.0
27,300
42,700
54,600
0.05
0.09
0.11
0.05
0.09
0.11
0.33
0.65
0.76
0.33
0.65
0.76
6.4Y 8.9/ 0.4
230 x 1,600 x 680
230 x 1,280 x 680
9-1/16 x 63 x 26-3/4
9-1/16 x 50-3/8 x 26-3/4
32 (71)
36 (79)
38 (84)
Cross fin (Aluminum fin and copper tube)
Sirocco fan x 4
Sirocco fan x 3
14-15-16-18
21-24-26-28
21-24-27-31
233-250-267-300
350-400-433-467
350-400-450-517
494-530-565-636
742-847-918-989
742-847-953-1,095
0
DC motor
0.160
0.095
PP Honeycomb (long life)
ø15.88 (ø5/8)
ø15.88 (ø5/8) / ø19.05 (ø3/4) (Compatible)
ø6.35 (ø1/4)
ø9.52 (ø3/8)
O.D. 26 (1)
29-32-34-36
31-33-35-37
Drain pump option available with all models
Sleek and slim with stylishly curved lines, the PCFY series
blends right into any interior. It also features a single air outlet
which allows the auto vane to act as a shutter when the unit is
turned off.
Auto vane distributes air evenly
The pumping height of the
optional drain pump has been
increased from 400 mm to 600
mm, expanding flexibility in choosing unit location during installation
work.
Units are equipped with a
knock-out hole that enables
the induction of fresh outsideair.
Long life filter as standard
Drain pump
installation possible
Drainage outlet
can be 600mm
above ceiling
surface
Ceiling surface
Outside-air intake
The auto vane swings up and down automatically to distribute air
more evenly to every corner of the room.
Long life filter is equipped as standard enabling up to 2,500
hours of operation (office use) without maintenance.
Outside-air intake characteristics
Static pressure (Pa)
Extra slim, extra stylish
50
0
-50
-100
PCFY-P100-P125VKM
PCFY-P63VKM
PCFY-P40VKM
-150
-200
-250
-300
0
1
2
3
4
Airflow volume (m3/min)
Equipped with automatic air-speed adjustment
Keeps airflow at optimum level
according to ceiling height
The most suitable airflow can be selected for ceilings up to 4.2m
high, enhancing air-conditioning efficiency and comfort. (P100/P125)
Ceiling height
Standard
High ceiling
3.0(9-13/16)
4.2(13-3/4)
m (ft)
In addition to the conventional 4-speed setting, units are now
equipped with and automatic air-speed adjustment mode. This
setting automatically adjusts the air-speed to conditions that
match the room environment. At the start of heating/cooling
operation, the airflow is set to high-speed to quickly heat/cool the
room. When the room temperature reaches the desired setting,
the airflow speed is decreased automatically for stable comfortable heating/cooling operation.
Notes:
Greatly simplified installation
The direct suspension system eliminates the task of removing
Strong
Gentle
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(80.6°F)DB/19°C(66.2°F)WB,Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB,Outdoor 7°C(44.6°F)DB/6°C(42.8°F)WB
36-38-41-43
36-39-42-44
INDOOR UNIT
Wall mounted type
Specifications
PKFY-P VBM
PKFY-P VBM-E
PKFY-P VHM-E
PKFY-P VKM-E
PKFY-P VHM
*1
*1
*1
*1
kW
BTU/h
kW
Heating capacity
BTU/h
kW
Cooling *4
Power
kW
consumption Heating
A
Cooling *4
Current
A
Heating
External finish(Munsell No.)
mm(in.)
Dimension H x W x D
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
*2 m3/min
Airflow rate
L/s
Fan
(Lo-Mid2-Mid1-Hi)
cfm
External static pressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Mid2-Mid1-Hi) *2 *3
Cooling capacity
PKFY-P VKM
Elegant Design and Compact Dimensions Ideal for Offices,
Stores and Residential Uses.
Capacity range
Capacity P15 P20 P25 P32 P40 P50 P63 P100
VBM
VHM
VKM
PKFY-P15VBM-E
PKFY-P20VBM-E
1.7
5,800
1.9
6,500
2.2
7,500
2.5
8,500
Power source
PKFY-P25VBM-E
PKFY-P32VHM-E
1-phase 220-240V 50Hz / 1-phase 220V 60Hz
2.8
3.6
9,600
12,300
3.2
4.0
10,900
13,600
PKFY-P40VHM-E
PKFY-P50VHM-E
4.5
5.6
15,400
19,100
5.0
6.3
17,100
21,500
0.04
0.04
0.03
0.04
0.40
0.20
0.30
0.20
Plastic (1.0Y 9.2/0.2)
Plastic (1.0Y 9.2/0.2)
295 x 898 x 249(11-5/8 x 35-3/8 x 9-13/16)
295 x 815 x 225 (11-5/8 x 32-1/8 x 8-7/8)
13(29)
10 (23)
Cross fin (Aluminum fin and copper tube)
Line flow fan x 1
4.9-5.0-5.2-5.3
9-10.5-11.5
9-10.5-12
9-10-11
4.9-5.2-5.6-5.9
82-83-87-88
150-175-192
150-175-200
150-167-183
82-87-93-98
173-177-184-187
318-371-406
318-371-424
318-353-388
173-184-198-208
0
DC motor
1-phase induction motor
0.030
0.017
PP Honeycomb
ø12.7 (ø1/2) / ø15.88 (ø5/8)
ø12.7 (ø1/2)
(Compatible)
ø6.35 (ø1/4) / ø9.52 (ø3/8)
ø6.35 (ø1/4)
(Compatible)
I.D.16 (5/8)
29-31-32-33
34-37-41
29-31-34-36
34-38-41
Notes:
4-way piping provides more flexibility in selecting installation sites
All piping including drainage can be connected from the rear, right, base,
and left of the unit, providing much greater flexibility in piping and
selecting installation site.
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB,Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2 Airflow rate/Sound pressure level are in (low-middle2-middle1-high).
*3
It is measured in anechoic room.
*4
Electrical characteristic of cooling are included optional drain-pump.
Flat panel & Pure white finish
All models have changed from the grill
design, adopting the flat panel layout.
Pursuing a design that harmonizes with
virtually any interior, the unit color has been
changed from white to pure white.
Power source
PKFY-P VGM
PKFY-P VHM
PKFY-P VKM
PKFY-P VFM
Built-in signal receiver
PKFY-P VBM features
PKFY-P VHM features
Compact size of 898mm
Light unit
Width size reduced to match small
size buildings and offices.
Approx. 3kg reduced from conventional
model (P32-50). Easier installation.
Compact profile
-45mm
Drain pump (option)
-92mm
Quiet operation
898mm
Comparison with PKFY-P VGM-E
The optional drain pump allows the
drain connection to be raised as high
as 800mm, allowing more freedom in
piping layout design.
*1
*1
*1
*1
kW
BTU/h
kW
Heating capacity
BTU/h
kW
Cooling *4
Power
kW
consumption Heating
A
Cooling *4
Current
A
Heating
External finish(Munsell No.)
mm(in.)
Dimension H x W x D
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
*2 m3/min
Airflow rate
L/s
Fan
(Lo-Hi)
cfm
External static pressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Hi)
*2 *3
Cooling capacity
PKFY-P63VKM-E
PKFY-P100VKM-E
1-phase 220-230-240V 50Hz / 1-phase 220V 60Hz
7.1
11.2
38,200
24,200
8.0
12.5
27,300
42,600
0.05
0.08
0.04
0.07
0.58
0.37
0.30
0.51
Plastic (1.0Y 9.2/0.2)
365 x 1,170 x 295 (14-3/8 x 46-1/16 x 11-5/8)
21 (46)
Cross fin (Aluminum fin and copper tube)
Line flow fan x 1
20-26
16-20
267-333
333-433
565-706
706-918
0
DC motor
0.056
PP Honeycomb
ø15.88 (ø5/8) / ø19.05 (ø3/4)
ø15.88 (ø5/8)
(Compatible)
ø9.52 (ø3/8)
I.D. 16(5/8)
39-45
Drain pump
Indoor unit
800mm
Notes:
*1 Cooling/heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor : 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor : 7°C(45°F)DB/6°C(43°F)WB
*2 Airflow rate/Sound pressure level are in (low-high).
41-49
34-39-43
INDOOR UNIT
Floor standing exposed
Specifications
PFFY-P20VKM-E
Power source
PFFY-P VKM-E
*1
*1
*1
Heating capacity
*1
Cooling
Power
Heating
consumption
Cooling
Current
Heating
External finish
Dimension
HxWxD
Net weight
Heat exchanger
Type x Quantity
Airflow rate
(Lo-Mid-Hi-SHi)
Fan
Eaternal static
pressure
Type
Motor
Output
Air filter
Gas(Flare)
Refrigerant
pipe diameter Liquid(Flare)
Field drain pipe diameter
Sound pressure level
(Lo-Mid-Hi-SHi)
*2
Cooling capacity
PFFY-P VKM-E
For living rooms, bed rooms, or offices where a sophisticated
design is required. The latest Mitsubishi innovation – floor-standing
air-conditioner sophisticated in design, rich in function.
Quiet operation
Mitsubishi Electric air conditioners have
always been some of the quietest models
available in the market. Our new
floorstanding models are no exception.
It can create a silent and comfortable
space where the occupants would not
even recognize the existence of air
conditioner operation.
ONLY
*2.5kw class
kW
BTU/h
kW
BTU/h
kW
kW
A
A
2.2
7,500
2.5
8,500
0.025
0.025
0.20
0.20
mm
in.
kg(lbs.)
m3/min
5.9-6.8-7.6-8.7
PFFY-P32VKM-E
PFFY-P25VKM-E
1-phase 220-240V 50Hz
3.6
2.8
12,300
9,600
4.0
3.2
13,600
10,900
0.025
0.025
0.025
0.025
0.20
0.20
0.20
0.20
Plastic (Pure white)
600 x 700 x 200
23-5/8 x 27-9/16 x 7-7/8
15 (34)
Cross fin (Alminium plate fin and copper tube)
Line flow fan x 2
mm(in.)
mm(in.)
27-31-34-37
28-32-35-38
Human
Subway car
interior
car interior
(40km/h)
Library interior
80dB
60dB
40dB
hearing limits
Sound of
rustling leaves (Extremely quiet)
27dB
10dB
the
quietest!
Sophisticated Design
Optimum Air Distribution
From Mitsubishi
Deluxe look in
Electric, an
“Glossy Pure White” color
innovative new
floor-standing
air-conditioner.
Sleek louvers look just like
Our pleasing mix
flat panels
of streamlined
form and
Smart upper/lower air outlets
diversified
close when switched off
function.
Engineered to
keep room walls free, furnish comfy cooling in summer, toasty
heating in winter.
The “Glossy Pure White” colour ensures a deluxe look, the
perfect match for any room. Both upper and lower air outlets
remain closed when switched OFF, in a smart and striking
image.
A superb new air-conditioner from Mitsubishi, providing a
handsome fit for your own distinctive interior.
Comfy room temperatures are realized by the optimum, powerful
and efficient air distribution through upper and lower air outlets.
The upper vane angle is remote controllable, with 5 air flow
direction levels (+Swing and Auto modes) and 4 wind power
levels (+Auto mode).
By setting the vane angle almost vertical, annoying direct wind
can be avoided for your better comfort.
Slim but Mighty
600 mm
The unit body is slim and
trim, the essence in compact.
An ideal size for living
rooms, bedrooms, and more.
The removable and washable
front panel makes cleaning
200
700 mm
a snap.
mm
Easy and regular cleaning
allows your air-conditioner stay beautiful while keeping its
energy-efficient operation always possible.
The air from both upper and lower air
outlets is optimally controlled and distributed
evenly to every corner of the room. In
heating mode, the warm air is smartly
controlled to stay at the floor level: Your feet
do not feel chilled any more!
8.0-9.0-9.5-10.7
DC motor
0.03 x 2
PP honeycomb fabric (Catechin Filter)
ø12.7 (ø1/2)
ø6.35 (ø1/4)
I.D.16 (5/8)
kW
27dB
Noise level Quiet passenger
4.5
15,400
5.0
17,100
0.028
0.028
0.24
0.24
0
Pa
dB(A)
6.1-7.0-8.0-9.1
6.1-7.0-8.0-9.1
PFFY-P40VKM-E
14 16 18 20 22 24 26 °C
Notes:
*1 Cooling/heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor : 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor : 7°C(45°F)DB/6°C(43°F)WB
28-32-35-38
35-38-42-44
INDOOR UNIT
Floor standing exposed
Specifications
PFFY-P20VLEM-E
Power source
PFFY-P VLEM-E
*1
*1
*1
Heating capacity
*1
Cooling
Power
consumption Heating
Cooling
Current
Heating
kW
BTU/h
kW
BTU/h
kW
kW
A
A
External finish(Munsell No.)
mm
Dimension H x W x D
in.
kg(lbs.)
Net weight
Heat exchanger
Type x Quantity
m3/min
Airflow rate
L/s
Fan
*2
(Lo-Hi)
cfm
Pa
External static pressure
Type
Motor
kW
Output
Air filter
Cooling capacity
Floor mounted lowboy type effective in perimeter zone.
Gas
mm(in.)
(Flare)
Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Hi)
*2 *3 *4
PFFY-P25VLEM-E
PFFY-P32VLEM-E
PFFY-P40VLEM-E
PFFY-P50VLEM-E
PFFY-P63VLEM-E
1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz
2.8
3.6
4.5
5.6
7.1
9,600
12,300
15,400
19,100
24,200
4.0
3.2
5.0
6.3
8.0
10,900
13,600
17,100
21,500
27,300
0.06 / 0.07
0.065 / 0.075
0.085 / 0.09
0.1 / 0.11
0.04 / 0.06
0.06 / 0.07
0.065 / 0.075
0.085 / 0.09
0.1 / 0.11
0.04 / 0.06
0.29 / 0.30
0.32 / 0.33
0.40 / 0.41
0.46 / 0.47
0.19 / 0.25
0.29 / 0.30
0.32 / 0.33
0.40 / 0.41
0.46 / 0.47
0.19 / 0.25
Acrylic paint (5Y 8/1)
630 x 1,170 x 220
630 x 1,050 x 220
630 x 1,410 x 220
24-13/16 x 46-1/8 x 8-11/16
24-13/16 x 41-3/8 x 8-11/16
24-13/16 x 55-9/16 x 8-11/16
25 (56)
26 (58)
30 (67)
32 (71)
23 (51)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 1
Sirocco fan x 2
7.0-9.0
9.0-11.0
12.0-14.0
12.0-15.5
5.5-6.5
117-150
150-183
200-233
200-258
92-108
247-318
318-388
424-494
424-547
194-230
0
1-phase induction motor
0.018
0.030
0.035
0.050
0.015
PP Honeycomb fabric (washable)
2.2
7,500
2.5
8,500
Refrigerant
pipe diameter
ø12.7 (ø1/2)
ø15.88 (ø5/8)
ø6.35 (ø1/4)
ø9.52 (ø3/8)
I.D.26 (1) <Accessory hose O.D.27 (1-3/32) (top end :20 (13/16))>
34-40
35-40
Standardized design with mild lines.
Supports various types of spaces from office buildings and shop buildings to hospitals.
Water vapor permeable film humidifier can be installed.
Remote controller can be installed onto the main unit.
Compact unit for easy air conditioning in perimeter zone.
Electronics dry function dehumidify refreshingly.
The compact body of 220mm(8-11/16in.) in depth can be easily
installed in the perimeter zone for effective air conditioning in the
perimeter zone.
Optimum dehumidification depending on indoor temperature to
prevent over-cooling. Refreshing dehumidification can be
attained.
Notes:
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB,Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor 7°C(45°F)DB/6°C(43°F)WB
*2 Air flow rate/Sound pressure level are in (Low-High)
*3 Measured point : 1m x 1m, Power supply : AC240V/50Hz
· 1dB(A) lower at AC230V/50Hz
· 2dB(A) lower at AC220V/50Hz
38-43
40-46
INDOOR UNIT
Floor mounted concealed type
Specifications
PFFY-P20VLRM-E
PFFY-P25VLRM-E
PFFY-P32VLRM-E
PFFY-P40VLRM-E
PFFY-P50VLRM-E
PFFY-P63VLRM-E
1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz
2.8
3.6
4.5
5.6
7.1
9,600
12,300
15,400
19,100
24,200
3.2
4.0
5.0
6.3
8.0
10,900
13,600
17,100
21,500
27,300
0.04 / 0.06
0.06 / 0.07
0.065 / 0.075
0.085 / 0.09
0.1 / 0.11
0.04 / 0.06
0.06 / 0.07
0.065 / 0.075
0.085 / 0.09
0.1 / 0.11
0.19 / 0.25
0.29 / 0.30
0.32 / 0.33
0.40 / 0.41
0.46 / 0.47
0.19 / 0.25
0.29 / 0.30
0.32 / 0.33
0.40 / 0.41
0.46 / 0.47
Galvanized steel plate
639 x 1,006 x 220
639 x 886 x 220
639 x 1,246 x 220
25-3/16 x 39-5/8 x 8-11/16
25-3/16 x 34-15/16 x 8-11/16
25-3/16 x 49-1/16 x 8-11/16
18.5 (41)
20 (45)
21 (47)
25 (56)
27 (60)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 1
Sirocco fan x 2
5.5-6.5
7.0-9.0
9.0-11.0
12.0-14.0
12.0-15.5
92-108
117-150
150-183
200-233
200-258
194-230
247-318
318-388
424-494
424-547
0
1-phase induction motor
0.015
0.018
0.030
0.035
0.050
PP Honeycomb fabric (washable)
Power source
PFFY-P VLRM-E
PFFY-P VLRMM-E
*1
*1
*1
Heating capacity
*1
Cooling
Power
consumption Heating
Cooling
Current
Heating
2.2
7,500
2.5
8,500
kW
BTU/h
kW
BTU/h
kW
kW
A
A
External finish(Munsell No.)
mm
Dimension H x W x D
in.
kg(lbs.)
Net weight
Heat exchanger
Type x Quautity
*2 m3/min
Airflow rate
L/s
Fan
(Lo-Hi)
cfm
External static pressure
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
(Flare)
Refrigerant
pipe diameter Liquid
mm(in.)
(Flare)
Field drain pipe diameter mm(in.)
Sound pressure level
dB(A)
(Lo-Hi)
*2 *3 *4
Cooling capacity
Neatly installed with pericover concealed.
Easy installation in perimeter zone.
SA
ø12.7 (ø1/2)
ø15.88 (ø5/8)
ø6.35 (ø1/4)
ø9.52 (ø3/8)
I.D.26 (1) <Accessory hose O.D.27 (1-3/32) (top end :20 (13/16))>
34-40
35-40
38-43
40-46
Notes:
RA
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor 7°C(45°F)DB/6°C(43°F)WB
installation image
(PFFY-P VLRMM-E)
*2 Air flow rate/Sound pressure level are in (Low-High)
*3 Measured point : 1m x 1m, Power supply : AC240V/50Hz
· 1dB(A) lower at AC230V/50Hz
· 2dB(A) lower at AC220V/50Hz
· 3dB(A) lower at 1.5m x 1.5m point
Compact unit for easy air conditioning in perimeter zone.
The body is concealed in the pericover to pursue harmony with the interior.
The compact body of 220mm(8-11/16in.) in depth can be easily installed in the
perimeter zone.
Electronics dry function dehumidify refreshingly to prevent over-cooling.
Optimum dehumidification depending on indoor temperature to prevent over-cooling.
Refreshing dehumidification can be attained.
Maximum external static pressure 60Pa (VLRMM model)
The additional external static pressure capacity provides flexibility for duct
extension, branching, and air outlet configuration.
*4 It is measured in anechoic room.
Power source
*1
*1
*1
*1
kW
Cooling capacity
BTU/h
kW
Heating capacity
BTU/h
kW
Cooling
Power
kW
consumption Heating
A
Cooling
Current
A
Heating
External finish(Munsell No.)
mm
Dimension H x W x D
in.
kg(lbs.)
Net weight
Heat exchanger
Type x Quautity
m3/min
Airflow rate
L/s
Fan
(Lo-Mid-Hi)
cfm
External static pressure *2
Pa
Type
Motor
Output
kW
Air filter
Gas
mm(in.)
Refrigerant
pipe diameter Liquid mm(in.)
Field drain pipe diameter mm(in.)
dB(A)
Sound pressure 20Pa
dB(A)
level (Lo-Mid-Hi) 40Pa
dB(A)
*3 60Pa
PFFY-P20VLRMM-E PFFY-P25VLRMM-E PFFY-P32VLRMM-E PFFY-P40VLRMM-E PFFY-P50VLRMM-E PFFY-P63VLRMM-E
1-phase 220-240V 50Hz / 1-phase 220-240V 60Hz
3.6
2.2
2.8
4.5
5.6
7.1
12,300
7,500
9,600
15,400
19,100
24,200
4.0
2.5
3.2
5.0
6.3
8.0
13,600
8,500
10,900
17,100
21,500
27,300
0.04
0.04
0.05
0.05
0.07
0.04
0.04
0.05
0.05
0.07
0.34
0.38
0.43
0.48
0.59
0.34
0.38
0.43
0.48
0.59
Galvanized steel plate
639 x 1,006 x 220
639 x 886 x 220
639 x 1,246 x 220
25-3/16 x 39-5/8 x 8-11/16
25-3/16 x 34-15/16 x 8-11/16
25-3/16 x 49-1/16 x 8-11/16
18.5 (41)
20 (45)
21 (47)
25 (56)
27 (60)
Cross fin (Aluminum plate fin and copper tube)
Sirocco fan x 1
Sirocco fan x 2
4.5-5.5-6.5
6.5-7.5-9.0
8.0-9.5-11.0
10.0-12.0-14.0
11.0-13.0-15.5
75-92-108
108-125-150
133-158-183
167-200-233
183-217-258
159-194-230
230-265-318
282-335-388
353-424-494
388-459-547
20/40/60
DC motor
0.096
PP Honeycomb fabric (washable)
ø12.7 (ø1/2) Brazed
ø15.88 (ø5/8) Brazed
ø6.35 (ø1/4) Brazed
ø9.52 (ø3/8) Brazed
I.D.26 (1) <Accessory hose O.D.27 (1-3/32) (top end :20 (13/16))>
31-36-40
27-32-37
30-36-40
32-37-41
35-40-44
34-39-42
30-35-41
32-38-42
35-40-44
36-42-47
35-40-43
32-37-42
3.5-39-44
36-41-45
38-43-48
Notes:
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling Indoor : 27°C(81°F)DB/19°C(66°F)WB, Outdoor 35°C(95°F)DB
Heating Indoor : 20°C(68°F)DB, Outdoor 7°C(45°F)DB/6°C(43°F)WB
pipe length : 7.5m(24-9/16ft)
Height difference : 0m(0ft)
*2 The external static pressure is set to 20Pa at factory shipment.
BC CONTROLLER
Specifications
CMB-P108V-GA1
8
Model name
Number of branch
Power source
CMB-P-V-G1
CMB-P-V-GA1
CMB-P-V-HA1
CMB-P-V-GB1
CMB-P-V-HB1
CMB-P1010V-GA1
CMB-P1013V-GA1
CMB-P1016V-GA1
CMB-P1016V-HA1
10
13
16
1-phase 220/230/240V 50Hz/60Hz
0.127/0.144/0.161
0.156/0.177/0.198
0.201/0.228/0.255
0.246/0.279/0.312
0.060/0.068/0.076
0.075/0.085/0.095
0.097/0.110/0.123
0.119/0.135/0.151
0.102/0.115/0.127
0.126/0.141/0.156
0.162/0.182/0.201
0.198/0.222/0.246
0.048/0.054/0.060
0.060/0.068/0.075
0.078/0.088/0.097
0.096/0.108/0.119
0.58/0.63/0.68
0.71/0.77/0.83
0.92/1.00/1.07
1.12/1.22/1.30
0.28/0.30/0.32
0.35/0.37/0.40
0.45/0.48/0.52
0.55/0.59/0.63
0.47/0.50/0.53
0.58/0.62/0.65
0.74/0.80/0.84
0.90/0.97/1.03
0.22/0.24/0.25
0.28/0.30/0.32
0.36/0.39/0.41
0.44/0.47/0.50
Galvanized steel plate (Lower part drain pan painting N1.5)
Model P80 or smaller
(•Use optional joint pipe combing 2 branches when the total unit capacity exceeds 81.)
Refer to the combination chart of BC controller R2/WR2 series
289
1,110
520
Connectable outdoor unit capacity
P250,300
P550~P650
P200
P350
P400~P500
P700~P800/P850~P900 *4
Cooling
heating
Cooling
60Hz
heating
Cooling
50Hz
heating
Cooling
60Hz
heating
50Hz
CMB-P-V-GB1
CMB-P-V-HB1
CMB-P-V-G1
CMB-P-V-GA1
CMB-P-V-HA1
kW
Power input
A
Current
External finish
Indoor unit capacity
connectable to 1 branch
Connectable Outdoor unit
Height
Width
Depth
CMB-P-V-GB1
CMB-P-V-HB1
mm
mm
mm
BC CONTROLLER
In many ways, the BC Controller is the technological heart of the CITY MULTI R2/WR2. It works in unison with the outdoor
unit to provide simultaneous cooling and heating, something no other two-pipe system can do. The BC Controller is
connected to the outdoor unit by two pipes and to each indoor unit by a series of two refrigerant pipes, depending on the
indoor unit count. The BC Controller is required for all CITY MULTI R2-Series installations. It comes in 4, 5, 6, 8, 10, 13, and
16-branch options. The BC Controller you select depends on how many indoor units will be operated from each outdoor unit
and your total capacity requirements.
Outdoor unit
Low pressure
gas
BC controller
To outdoor
unit
Refrigerant
piping
diameter
ø15.88 (ø5/8) Brazed
Low pressure pipe
ø19.05 (ø3/4) Brazed ø22.2 (ø7/8) Brazed
Liquid pipe
To indoor
unit
Gas pipe
To another BC
High press gas pipe
controller
Low press gas pipe
Liquid pipe
Indoor unit
Drain pipe
Net weight
Accessories
Heating
Low pressure gas
High pressure pipe
Heating
kg
Cooling
Cooling
heating
Cooling
60Hz
heating
Cooling
50Hz
heating
Cooling
60Hz
heating
50Hz
kW
High pressure gas
Low pressure gas
Low pressure 2-phase
High pressure liquid
High pressure gas
Low pressure gas
High pressure liquid
Low pressure 2-phase
Specifications
Model name
Number of branch
Power source
Cooling
heating
Cooling
60Hz
heating
Cooling
50Hz
heating
Cooling
60Hz
heating
50Hz
Power input
kW
Current
A
External finish
Indoor unit capacity
connectable to 1 branch
Connectable Outdoor unit
Height
Width
Depth
Refrigerant
piping
diameter
To outdoor
unit
To indoor
unit
Drain pipe
Net weight
mm
mm
mm
High pressure pipe
Low pressure pipe
Liquid pipe
Gas pipe
kg
CMB-P104V-G1 CMB-P105V-G1 CMB-P106V-G1 CMB-P108V-G1 CMB-P1010V-G1 CMB-P1013V-G1 CMB-P1016V-G1
5
4
6
8
10
13
16
1-phase 220/230/240V 50Hz/60Hz
0.067/0.076/0.085 0.082/0.093/0.104 0.097/0.110/0.123 0.127/0.144/0.161 0.156/0.177/0.198 0.201/0.228/0.255 0.246/0.279/0.312
0.030/0.034/0.038 0.038/0.043/0.048 0.045/0.051/0.057 0.060/0.068/0.076 0.075/0.085/0.095 0.097/0.110/0.123 0.119/0.135/0.151
0.054/0.061/0.067 0.066/0.074/0.082 0.078/0.088/0.097 0.102/0.115/0.127 0.126/0.141/0.156 0.162/0.182/0.201 0.198/0.222/0.246
0.024/0.027/0.030 0.030/0.034/0.038 0.036/0.041/0.045 0.048/0.054/0.060 0.060/0.068/0.075 0.078/0.088/0.097 0.096/0.108/0.119
0.31/0.34/0.36 0.38/0.41/0.44 0.45/0.48/0.52 0.58/0.63/0.68 0.71/0.77/0.83 0.92/1.00/1.07 1.12/1.22/1.30
0.14/0.15/0.16 0.18/0.19/0.20 0.21/0.23/0.24 0.28/0.30/0.32 0.35/0.37/0.40 0.45/0.48/0.52 0.55/0.59/0.63
0.25/0.27/0.28 0.30/0.33/0.35 0.36/0.39/0.41 0.47/0.50/0.53 0.58/0.62/0.65 0.74/0.80/0.84 0.90/0.97/1.03
0.11/0.12/0.13 0.14/0.15/0.16 0.17/0.18/0.19 0.22/0.24/0.25 0.28/0.30/0.32 0.36/0.39/0.41 0.44/0.47/0.50
Galvanized steel plate (Lower part drain pan painting N1.5)
Model P80 or smaller
(•Use optional joint pipe combing 2 branches when the total unit capacity exceeds 81.)
Refer to the combination chart of BC controller R2/WR2 series
284
648
1098
432
Connectable outdoor unit capacity
P200
P250, P300
P350
ø15.88 (ø5/8) Brazed
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
ø19.05 (ø3/4) Brazed
ø22.2 (ø7/8) Brazed
ø28.58 (ø1-1/8) Brazed
Indoor unit Model 50 or smaller:ø6.35 brazed, Over 50:ø9.52 brazed
(ø12.7 with optional joint pipe used.)
Indoor unit Model 50 or smaller:ø12.7 brazed, Over 50:ø15.88 brazed
(ø19.05 with optional joint pipe used.)
O.D. 32mm
33
24
27
28
38
45
52
ø34.93 (ø1-3/8) Brazed/
ø41.28 (ø1-5/8) Brazed
Indoor unit Model 50 or smaller:ø6.35 brazed, Over 50:ø9.52 brazed
(ø12.7 with optional joint pipe used.)
Indoor unit Model 50 or smaller:ø12.7 brazed, Over 50:ø15.88 brazed
(ø19.05 with optional joint pipe used.)
Total indoor unit capacity connected to this Sub BC controller
P201~P300
P301~P350
P351~P400
P401~P450
~P200
ø19.05 (ø3/4) Brazed
ø15.88 (ø5/8) Brazed
ø22.2 (ø7/8) Brazed
ø19.05 (ø3/4) Brazed ø22.2 (ø7/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø9.52 (ø3/8) Brazed
ø12.7 (ø1/2) Brazed
ø15.88 (ø5/8) Brazed
O.D. 32mm
43
48
55
62
69
•Drain connection pipe (with flexible hose and insulation) •Reducer
Power input
Cooling
ø22.2 (ø7/8) Brazed ø28.58 (ø1-1/8) Brazed ø28.58 (ø1-1/8) Brazed/
ø28.58 (ø1-1/8) Brazed
ø28.58 (ø1-1/8) Brazed
CMB-P108V-GB1
CMB-P1016V-HB1
8
16
1-phase 220/230/240V 50Hz/60Hz
0.060/0.068/0.076
0.119/0.135/0.151
0.237/0.269/0.301
0.030/0.034/0.038
0.060/0.068/0.076
0.119/0.135/0.151
0.048/0.054/0.060
0.096/0.108/0.119
0.192/0.216/0.237
0.024/0.027/0.030
0.048/0.054/0.060
0.096/0.108/0.120
0.28/0.30/0.32
0.55/0.59/0.63
1.08/1.17/1.26
0.14/0.15/0.16
0.28/0.30/0.32
0.55/0.59/0.63
0.22/0.24/0.25
0.44/0.47/0.50
0.88/0.94/0.99
0.11/0.12/0.13
0.22/0.24/0.25
0.44/0.47/0.50
Galvanized steel plate (Lower part drain pan painting N1.5)
Model P80 or smaller
(•Use optional joint pipe combing 2 branches when the total unit capacity exceeds 81.)
Refer to the combination chart of BC controller R2/WR2 series
284
284
648
1,098
432
432
Total indoor unit capacity connected this Sub BC controller
~P200, P201~P350
~P200, P201~P450
~P200
P201~P300
P301~P350
P351~P400
P401~P450
ø15.88 (ø5/8) Brazed
ø19.05 (ø3/4) Brazed
ø22.2 (ø7/8) Brazed
ø19.05 (ø3/4) Brazed ø22.2 (ø7/8) Brazed
ø28.58 (ø1-1/8) Brazed
ø15.88 (ø5/8) Brazed
ø12.7 (ø1/2) Brazed
ø9.52 (ø3/8) Brazed
Indoor unit Model 50 or smaller:ø6.35 brazed, Over 50:ø9.52 brazed
(ø12.7 with optional joint pipe used.)
CMB-P104V-GB1
4
Model name
Number of branch
Power source
High pressure gas
ø19.05 (ø3/4) Brazed
A
Current
External finish
Indoor unit capacity
connectable to 1 branch
Connectable Outdoor unit
Height
Width
Depth
To Main BC
controller
Refrigerant
piping
diameter
mm
mm
mm
High pressure pipe
Low pressure pipe
Liquid pipe
Liquid pipe
To indoor
unit
Gas pipe
Drain pipe
Net weight
Accessories
kg
22
55
•Drain connection pipe (with flexible hose and insulation) •Reducer
Combination chart of BC Controller for R2 series
P200,250,300,350 P400-650
CMB-P V-G1
CMB-P V-GA1
CMB-P V-HA1
CMB-P V-GB1
CMB-P V-HB1
Indoor unit Model 50 or smaller:ø12.7 brazed, Over 50:ø15.88 brazed
(ø19.05 with optional joint pipe used.)
O.D. 32mm
32
X
X
X
Combination chart of BC Controller for WR2 series
P200,250,300
P700-900
X
X
CMB-P V-G1
CMB-P V-GA1
CMB-P V-HA1
CMB-P V-GB1
CMB-P V-HB1
P400,450,500,550,600
X
X
X
Notes:
1. The equipment is for R410A refrigerant.
2. Install this product is a location where noise (refrigerant noise) emitted by the unit will not
disturb the neighbors.(For use in quiet environments with low background noise, position the
BC CONTROLLER at least 5 m away from any indoor units.)
5. For sub BC controller CMB-P-B-GB1 the connectable indoor unit capacities may sum to
equal that of a P350 unit or less. However, if two sub controllers are used the TOTAL sum of
connectable units connected to BOTH sub controllers must also not exceed that a P350 unit.
For sub BC controller CMB-P-1016V-HB1 the connectable indoor unit capacities may sum to
RX5 SERIES
The Ventilation System for Enhanced Air Quality - Lossnay
LOSSNAY Technology
Combine with Lossnay Ventilation System Enhanced Air Quality.
Unified Control System Allows Greater Design Freedom.
• Two paths ventilation
LOSSNAY simultaneously intakes Fresh Air and exhausts Dirty Air.
• Total energy recover
LOSSNAY returns BOTH sensible heat and latent heat.
A. Two paths ventilation
4°C (39.2
0°C (32
°F)
Stale hot air (exhaust)
EA
Stale air exhaust
(dirty indoor air)
°F)
Fresh cool air (outdoor)
Outdoors
Indoors
B. Total Energy transfer
SA
Fresh air exhaust
(fresh heating/cooling air)
Partition plate
Spacer plate
OA
RA
Stale air induction
(dirty heating/cooling air)
Fresh air induction
(fresh air)
20°C (68
°F)
Stale warm air (indoor air)
Sensible heat
Latent heat
• Hyper Eco Core
Better energy conservation by improved total heat exchange efficiency.
16°C
(60.8°F)
Fresh warm air (indoor supply air)
LGH-15RX5
LGH-25RX5
LGH-35RX5
LGH-50RX5
LGH-65RX5
[150m3/h Single phase 220-240V 50Hz]
[250m3/h Single phase 220-240V 50Hz]
[350m3/h Single phase 220-240V 50Hz]
[500m3/h Single phase 220-240V 50Hz]
[650m3/h Single phase 220-240V 50Hz]
LGH-80RX5
LGH-100RX5
LGH-150RX5
LGH-200RX5
Introducing the new Hyper Eco Element
Mitsubishi's newly developed Hyper Eco Element is on
board, offering the industry's best total heat exchange
efficiency. Energy conservation performance has been
improved not only by reducing the air conditioning load
associated with ventilation, but also by facilitating humidity
penetration.
[800m3/h Single phase 220-240V 50Hz]
[1000m3/h Single phase 220-240V 50Hz]
[1500m3/h Single phase 220-240V 50Hz]
[2000m3/h Single phase 220-240V 50Hz]
Outdoors
EA
(exhaust air)
Indoors
SA
Element Structure
(supply air)
Enthalpy exchange efficiency improve
*Cooling, High Fan speed, 50Hz
74%
Heat-Exchange Efficiency Obtainable Only with Lossnay.
The secret to the unmatched comfort provided by Lossnay core is the cross-flow, plate-fin structure off the
heat-exchange unit. A diaphragm made of a specially processed paper fully separates inducted and exhausted air
supplies, ensuring that only fresh air is introduced to the indoor environment.
The superior heat-transfer and moisture permeability of the special paper assure highly effective total heat exchange
(temperature and humidity) when inducted and exhausted air supplies cross in the Lossnay core.
OA
RA
(outside air)
(return air)
73%
72%
71%
Hyper Element
Hyper Eco Element
Humidity does not
penetrate easily.
Humidity penetration is
facilitated.
Spacerplates
70%
69%
68%
Improved adhesive
agent material
67%
66%
Dividerplates
65%
Adhesive agent
with low humidity
penetration rate
Humidity
New adhesive agent
with high humidity
penetration rate
64%
RX4
RX5
Why LOSSNAY is necessary.
Extra Low Mode
Additional energy conservation by using a
four-level air volume system that allows
more precise control.
• Without ventilation...
Lack of Ventilation makes people sick by dirty indoor air including CO2, Dust, Bacteria.
• If just opening windows...
In addition to the conventional Extra High, High, and Low
modes, an Extra Low mode is added to provide a more
dynamic range of air volume settings and versatility in a
variety of installation environments, yielding much better
energy conservation. Using a simplified timer function, it
switches to Extra Low operation when the operation stop
button is activated and it is accordingly possible to
implement 24-hour energy conservation ventilation.
Opening windows eliminates dirty air BUT wastes much air-con energy.
• So we recommend LOSSNAY
LOSSNAY is simultaneous pursuit of Ventilation and Energy Saving.
Ventilation
Energy Save
A)
Extra Low
Low
High
B)
Extra Low
Low
Extra High
* The Extra High and High ventilation modes are selectable by the initial
setting.
* Extra-Low not equipped LGH-150RX 5 and 200RX5.
* The ventilation mode is actually selected in three levels, and the remote
controller also displays these three levels.
• This is LOSSNAY !
ADVANTAGES
Clean air supply, dirty air exhaust by Two air paths (OA SA and RA EA)
Energy recovery by LOSSNAY Core
Free cooling by bypass damper
MULTI VENTILATION MODE for multi ventilation request (Power supply, Power supply/exhaust, Power exhaust)
UNIT STRUCTURE
Energy Recovery Image
EA (exhaust air)
Energy Saving by
timer
Air volume level can be set hourly (max 8 times) and weekly. You can pre-set air volume according to the predictable
requirement so that LOSSNAY can automatically operate at only necessary air-speed at the specified time period, which
saves power consumption while maintaining the indoor air quality. Besides, once the weekly timer has been set, no
switching on-off is required.
Example A (Hourly)
current RX4 series with PZ-41SLB controller
LOSSNAY Core
8:00
OA (outside air)
Bypass damper
22:00
high
Air conditioner
new RX5 series with PZ-60DR-E
8:00
16°C
Thermal
energy
RA (return air)
Outdoor:0°C Indoor:20°C
12:00
high
13:00
low
17:00
high
19:00
low
Tolal power consumption in one day : LGH-100RX4-E : 6,600W (14 hours)
LGH-100RX5-E : 5,390W (14 hours)
22:00
extra low
1,210W (18%) less
Example B (Weekly)
Monday
to
Thursday
SA (supply air)
How much recovery?
OA temp. : 0°C
9:00
low
SA temp. : 16°C
(Indoor 20°C)
8:00
8:00
Friday
Saturday
to
Sunday
9:00
low
12:00
high
9:00
low
12:00
high
13:00
low
17:00
high
13:00
low
19:00
low
17:00
high
8:00
22:00
extra low
22:00
extra low
22:00
extra low
Model line up
New function: "By-pass" Ventilation External Control Setting
In addition to the automatic damper open/close function,
open/close control via external devices is now possible,
delivering a “By-pass” ventilation system that is suitable
to the installed environment.
"By-pass" operation
Control devices (example)
· Temperature sensor
· Humidity sensor
· Timers
Exhaust air
Return air
LGH-15RX5-E
LGH-15RX5-E
Model
Supply air
Fresh air
Establish the wire connection by inserting the optional
remote display adaptor (PAC-SA88HA-E) in the connector
CN16 (Ventilation mode selector).
LOSSNAY core
Remote display adaptor
(Optional) PAC-SA88HA-E
Red 2
LOSSNAY
control board
CN16
Yellow 4
SW1: By-pass ventilation operation switch
(When closed: For By-pass ventilation operation)
Green 5
50Hz / Single phase 220-240V
LOSSNAY ventilation
Fan speed/
entilation
mode selection
Not used. Insulate completely
Max wiring length 10 m
•Automatic ventilation setting
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Current (A)
0.44-0.46
0.37-0.38
0.25-0.25
0.14-0.15
0.45-0.46
0.37-0.38
0.25-0.26
0.14-0.15
96-110
80-90
53-59
30-35
97-110
81-91
54-61
30-35
(m3/h)
150
150
110
70
150
150
110
(L/s)
42
42
31
19
42
42
31
19
(mmH2O)
10.2-10.7
6.6-7.1
3.6-4.1
1.4
10.2-10.7
6.6-7.1
3.6-4.1
1.4
(Pa)
100-105
65-70
35-40
14
100-105
65-70
35-40
14
82.0
82.0
84.0
85.5
75.0
75.0
77.5
81.0
28.5-29
27-28
23-24
18-19
Air volume
External static pressure
Heating
Enthalpy exchange efficiency (%)
Noise (dB)
Cooling
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
73.0
73.0
76.5
81.0
27.5-28
26.5-27
22-23.5
18
Weight (kg)
1. Reduces cooling load
If th e air outside is cooler than the ai r i nside the
building during the cooling season (such as early
morning or at night), “By-pass” ventilation will draw
in the cooler outside air and reduce the cooling load
on the system.
2. Night purge
“By-pass” ventilation can be used to release hot air
from inside the building that has accumulated in
buildings a business district during the hot summer
season.
3. Office equipment room cooling
During cold season, fresh air can be drawn in and
used as is to cool rooms where the temperature has
risen due to the use of office equipment.
New Remote Controller PZ-60DR-E
LGH-25RX5-E
LGH-25RX5-E
Model
Frequency / Power source
50Hz / Single phase 220-240V
LOSSNAY ventilation
By-pass ventilation
Ventilation mode
Fan speed
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Current (A)
0.52-0.55
0.47-0.48
0.26-0.27
0.17-0.18
0.53-0.55
0.47-0.48
0.26-0.27
0.17-0.18
Power consumption (W)
113-129
102-114
56-62
36-42
115-131
103-115
56-63
36-42
(m3/h)
250
250
155
105
250
250
155
105
(L/s)
69
69
43
29
69
69
43
29
(mmH2O)
8.2-8.7
5.1-6.1
2-2.5
0.9
8.2-8.7
5.1-6.1
2-2.5
0.9
(Pa)
80-85
50-60
20-25
9
80-85
50-60
20-25
9
79.0
79.0
81.5
83.5
69.5
69.5
74.0
77.5
26.5-27.5
25.5-26.5
20.5-22
18-19
Air volume
External static pressure
Enthalpy exchange efficiency (%)
Noise (dB)
Heating
Cooling
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
68.0
68.0
72.5
76.0
26-27
25-26
20-21.5
18-19
Weight (kg)
20
Under 0.9 A Less
Starting current
*The Air outlets noise (45 angle,1.5 meters in front of the unit) is about 10 dB greater than the indicated value. (at High Fan speed)
A new remote controller for the RX5 series is now available. In addition to boosting the energy conservation performance of the main unit, the remote controller features a variety of new functions which also pursue additional energy
conservation.
The appearance of the remote controller conforms to Mitsubishi air conditioner interface design standards.
Functions that were set using DipSwitch on the LOSSNAY main unit
can now be configured as needed
Dot matrix display
using the new remote controller.
This eliminates the need to crawl
under the eaves to change operation
settings.
Also, a newly adopted dot matrix
ON/OFF button
display provides much more informaFan speed Adjustment button
tion, making it easy to check mainteButton
CLEAR button
nance indications, operation status
FILTER
button
display, and explanations required
"Extra Low" fan speed button
when configuring settings.
OPERATION button
Return button
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 6 dB greater than the indicated value. (at High Fan speed)
Temperature exchange efficiency (%)
* When the outdoor air tempereture drops lower than 8°C it changes to the heat
exchange ventilation. (Display of the remote controller does not change.)
* In the case of “By-pass” ventilation, the supply air temperature slightly rises more
than the outside air temperature because of the heat effect around the ducts or the
unit motors.
70
20
Under 0.8 A Less
Starting current
The automatic damper mode automatically provides
the correct ventilation for the conditions in the room.
The following shows the effect “By-pass” ventilation will
have under various conditions.
By-pass ventilation
Ventilation mode
Fan speed
Temperature exchange efficiency (%)
Orange 3
SW1
Frequency / Power source
Power consumption (W)
Brown 1
With SW1 is “ON”, the ventilation mode of LOSSNAY is
changed to the By-pass ventilation regardless of the
setting on the remote controller.
LGH-15~100RX5-E
Specification
Damper
OPERATION buttons
Back Ahead
LGH-35RX5-E
LGH-35RX5-E
Model
Frequency / Power source
50Hz / Single phase 220-240V
LOSSNAY ventilation
Ventilation mode
Fan speed
Extra High
High
Current (A)
0.92-0.92
Power consumption (W)
195-212
(m3/h)
Extra Low
Extra High
High
Low
Extra Low
0.74-0.74
0.5-0.51
0.28-0.3
0.93-0.94
0.77-0.77
0.51-0.52
0.28-0.3
160-169
105-116
58-69
197-217
164-173
105-116
58-69
350
350
210
115
350
350
210
115
(L/s)
97
97
58
32
97
97
58
32
(mmH2O)
15.8-16.3
7.6-8.2
2.5-3.1
0.9
15.8-16.3
7.6-8.2
2.5-3.1
0.9
(Pa)
155-160
75-80
25-30
9
155-160
75-80
25-30
9
80.0
80.0
85.0
88.0
71.5
71.5
76.5
81.5
32.5-32.5
29.5-30.5
21.5-24
18
Air volume
External static pressure
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
Noise (dB)
Heating
Cooling
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
Starting current
By-pass ventilation
Low
71.0
71.0
75.5
81.0
32-32
28.5-29.5
21.5-23
18
29
Under 2.4 A Less
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 10 dB greater than the indicated value. (at High Fan speed)
LGH-15~100RX5-E
LGH-15~100RX5-E
LGH-50RX5-E
LGH-150/200RX5-E
LGH-100RX5-E
LGH-50RX5-E
Model
Frequency / Power source
LGH-100RX5-E
Model
50Hz / Single phase 220-240V
LOSSNAY ventilation
Ventilation mode
Fan speed
Frequency / Power source
By-pass ventilation
50Hz / Single phase 220-240V
LOSSNAY ventilation
Ventilation mode
Fan speed
By-pass ventilation
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Extra High
High
Current (A)
1.2-1.25
1.0-1.0
0.85-0.85
0.4-0.4
1.25-1.25
1.0-1.0
0.85-0.85
0.4-0.4
Current (A)
2.3-2.4
2.1-2.1
1.7-1.7
0.9-0.9
2.3-2.4
2.1-2.1
1.7-1.7
0.9-0.9
Power consumption (W)
255-286
207-228
175-190
80-95
260-290
210-230
180-195
80-95
Power consumption (W)
500-535
445-475
350-380
175-200
510-550
460-485
365-395
175-200
500
500
390
180
500
500
390
180
1000
1000
755
415
1000
1000
755
415
(m3/h)
Air volume
External static pressure
(L/s)
139
139
108
50
139
139
108
50
(mmH2O)
15.3-15.8
6.6-9.2
4.1-6.1
1.0
15.3-15.8
6.6-9.2
4.1-6.1
1.0
(Pa)
150-155
65-90
40-60
10
150-155
65-90
40-60
10
78.0
78.0
81.0
86.0
69.0
69.0
71.0
78.0
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
Noise (dB)
Heating
Cooling
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
66.5
66.5
68.0
77.0
33-34
30.5-32
26.5-28
19
Weight (kg)
Air volume
External static pressure
Enthalpy exchange efficiency (%)
34-35
31-32.5
27-29
19
Noise (dB)
(L/s)
278
278
210
115
278
278
210
115
16.3-17.3
10.2-11.2
5.6-6.1
1.8
16.3-17.3
10.2-11.2
5.6-6.1
1.8
(Pa)
160-170
100-110
55-60
18
160-170
100-110
55-60
18
80.0
80.0
83.0
87.0
72.5
72.5
74.0
80.0
37-38
35-36
32-33
21-22
Heating
Cooling
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
71.0
71.0
73.0
79.0
36-37
34-35
31-32.5
21-22
Weight (kg)
59
Under 4.6 A Less
Starting current
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 16 dB greater than the indicated value. (at High Fan speed)
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 17 dB greater than the indicated value. (at High Fan speed)
LGH-65RX5-E
LGH-150RX5-E
LGH-65RX5-E
Model
Frequency / Power source
LOSSNAY ventilation
Ventilation mode
Fan speed
LGH-150RX5-E
Model
50Hz / Single phase 220-240V
Frequency / Power source
By-pass ventilation
Extra Low
(mmH2O)
Temperature exchange efficiency (%)
32
Under 3.0 A Less
Starting current
(m3/h)
Low
50Hz / Single phase 220-240V
LOSSNAY ventilation
Ventilation mode
Fan speed
By-pass ventilation
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra High
Current (A)
1.7-1.8
1.5-1.5
1.2-1.2
0.6-0.6
1.7-1.8
1.5-1.5
1.2-1.2
0.6-0.6
Current (A)
3.5-3.5
3.2-3.2
2.9-2.9
3.5-3.5
3.2-3.2
2.9-2.9
Power consumption (W)
350-380
308-322
248-265
120-140
350-385
310-335
250-265
120-140
Power consumption (W)
760-830
690-740
630-680
765-835
695-745
635-685
520
265
520
265
(m3/h)
Air volume
External static pressure
Noise (dB)
650
650
650
181
181
144
74
181
181
144
74
11.2-12.2
6.1-8.2
4.1-5.1
0.8
11.2-12.2
6.1-8.2
4.1-5.1
0.8
(Pa)
110-120
60-80
40-50
8
110-120
60-80
40-50
8
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
650
(L/s)
(mmH2O)
77.0
77.0
80.0
86.0
Heating
68.5
68.5
70.5
78.0
Cooling
66.0
66.0
68.5
77.0
34-34.5
32-33
28.5-31.5
22
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
External static pressure
Enthalpy exchange efficiency (%)
34.5-35
32.5-33.5
28.5-30.5
22-22.5
1500
1500
1500
1300
417
417
361
417
417
361
16.3-17.8
13.3-13.8
9.7-10.2
16.3-17.8
13.3-13.8
9.7-10.2
(Pa)
160-175
130-135
95-100
160-175
130-135
95-100
39-40.5
37.5-39
35.5-37
80.0
80.0
81.0
Heating
72.0
72.0
72.5
Cooling
70.5
70.5
71.5
38-39
36-37.5
33.5-35
(Measured at 1.5m under the center
Noise (dB)
of panel in an anechoeic chamber)
Weight (kg)
105
Under 7.3 A Less
Starting current
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 19 dB greater than the indicated value. (at High Fan speed)
LGH-80RX5-E
LGH-200RX5-E
LGH-80RX5-E
Frequency / Power source
LGH-200RX5-E
Model
50Hz / Single phase 220-240V
LOSSNAY ventilation
Frequency / Power source
By-pass ventilation
Ventilation mode
Fan speed
Extra High
High
Low
Extra Low
Extra High
High
Low
Extra Low
Ventilation mode
Fan speed
Current (A)
1.75-1.75
1.6-1.6
1.45-1.45
0.60-0.65
1.75-1.75
1.6-1.6
1.45-1.45
0.60-0.65
Current (A)
Power consumption (W)
380-415
345-370
315-340
125-145
380-415
345-370
315-340
120-145
Power consumption (W)
(m3/h)
700
355
700
355
(L/s)
222
222
194
99
222
222
194
99
(mmH2O)
14.8-15.3
10.7-12.2
8.2-9.7
2
14.8-15.3
10.7-12.2
8.2-9.7
2
(Pa)
145-150
105-120
80-95
20
145-150
105-120
80-95
20
79.0
79.0
80.5
87.5
71.0
71.0
72.5
79.5
Air volume
External static pressure
Temperature exchange efficiency (%)
Enthalpy exchange efficiency (%)
Noise (dB)
Weight (kg)
Heating
Cooling
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
800
800
70.0
70.0
71.5
79.5
33.5-34.5
32-33
30-31
22
800
800
50Hz / Single phase 220-240V
LOSSNAY ventilation
(m3/h)
Air volume
External static pressure
Enthalpy exchange efficiency (%)
53
Under 3.8 A Less
Starting current
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 16 dB greater than the indicated value. (at High Fan speed)
33-34
31-32
22
Noise (dB)
Starting current
High
Low
Extra High
4.8-4.8
4.2-4.2
3.4-3.4
4.8-4.8
4.2-4.2
3.4-3.4
1035-1100
910-980
715-785
1040-1110
915-980
720-785
2000
2000
1580
2000
High
2000
Low
1580
(L/s)
556
556
439
556
556
439
16.3-16.8
10.2-10.7
6.1-6.6
16.3-16.8
10.2-10.7
6.1-6.6
(Pa)
160-165
100-105
60-65
160-165
100-105
60-65
80.0
80.0
83.0
72.5
72.5
73.5
40.5-41
38-39
33.5-35
Heating
Cooling
(Measured at 1.5m under the center
of panel in an anechoeic chamber)
Weight (kg)
By-pass ventilation
Extra High
(mmH2O)
Temperature exchange efficiency (%)
34.5-35.5
1300
(L/s)
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 10 dB greater than the indicated value. (at High Fan speed)
Model
1500
Low
(mmH2O)
Temperature exchange efficiency (%)
40
Under 4.4 A Less
Starting current
(m3/h)
Air volume
High
71.0
71.0
72.0
39.5-40
37-38
32.5-34
118
Under 11.9A Less
*The Air outlets noise (45 angle, 1.5 meters in front of the unit) is about 20 dB greater than the indicated value. (at High Fan speed)
VL-100U-E
Control
Heat Recovery Ventilators for Residential Use
The New Remote Controller PZ-60DR-E enable simple control setting
Time Spent in Comfort with a Breath of Fresh Air
Interlocked with Air conditioners
LOSSNAY independent
Interlocked with City Multi
Interlocked with Mr.Slim
M-NET transmission line
City Multi
Energy Saving
Slim-LOSSNAY connection cable
LOSSNAY
RX5
Mr.Slim
LOSSNAY RX5
(Max 15 unit)
Super sound
insulation
and quiet
operation.
OA
Simple
Installation
Fresh Air
LOSSNAY remote
controller
PZ-60DR-E
The LOSSNAY remote controller (PZ-60DR-E,
PZ-41SLB-E) can not be used with this system.
PZ-41SLB-E can be connected however function
is limited.
Simultaneous air
supply/exhaust
function ensures that
air stays fresh
with efficient
ventilation.
SA
Easy Installation
through boring
of 2 installation
holes.
EA
Total-Heat-Exchange Concept
Centralized Controller System
Centralized controller
AG-150A
Reduced heat loss
contributes to
lower air
conditioning
costs.
LOSSNAY
RX5
LOSSNAY remote
controller
PZ-60DR-E
can be connected
PZ-52SF-E can be used insted of PZ-60DR-E,
However, function is limited and connecting
position is different.
Quiet
Operation
RA
operation
in Summer
operation
in Winter
Outdoor unit
Interlocked with
CITY MULTI indoor units
Indoor unit
LOSSNAY RX5
15.4°C
24.2°C
4.6°C
Fresh warm air
(indoor supply air)
31.8
°C
Stale cool air
Fresh cool air
(indoor supply air)
Stale hot air
(exhasut)
(exhasut)
Indoor unit
Power supply unit
(PAC-SC51KUA)
Network remote
controller
LOSSNAY remote
controller
PZ-60DR-E
Network remote
controller
20°C
21°C
0°C
Stale warm air
(indoor air)
35°C
Stale cool air
(indoor air)
Fresh cool air
(outdoor air)
Fresh hot air
(outdoor air)
LOSSNAY units only
•Heat-exchange calculating equation
LOSSNAY RX5
LOSSNAY RX5
LOSSNAY remote
controller
PZ-60DR-E
LOSSNAY remote
controller
PZ-60DR-E
{
Indoor supply-air
Indoor
Outdoor
=
temperature(°C)
temperature(°C) temperature(°C)
{
Indoor supply-air Outdoor
Indoor
Outdoor
=
+
temperature(°C)
temperature(°C)
temperature(°C) temperature(°C)
Calculation example : 15.4°C = (20°C- 0°C) x 77% + 0°C (Low notch)
exchange
} x Temp
efficiency(%)
Calculation example : 35°C = (35°C - 21°C) x 77% (Low notch)
Specification
Interlocked with
external devices
LOSSNAY RX5
•Heat-exchange calculating equation
exchange Outdoor
+
} x Temp
efficiency(%)
temperature(°C)
Ext. signal source
LOSSNAY remote
controller
PZ-60DR-E
•Simple installation through boring of 2 installation holes.
•Low-noise(Less than 30dB at low notch).
•1-motor 2-fan system.
•Air-volume:low/high 2-notch.
•Air-supply/exhaust pipes and plastic weather cover are
supplied as accessories.
•Equipped with an outdoor-air shutter. •Pull-string switch
Supply Power line
Power
Temp.exchange
Air volume
Noise Weight
Voltage frequency Notch
Consumption
efficiency
(m3/h)
(dB)
(kg)
(V)
(Hz)
(W)
(%)
220-240
50
220
60
HI
105
26
70
39
LO
65
23
77
29.5
HI
90
26
73
37
LO
50
21
80
26
6.5
LOSSNAY RX5
280
ø79
Mr.Slim
indoor unit
60
20 20
ø75
Mr.Slim
outdoor unit
Extension Pipe Coupling
P-100PJ
ø70
M-NET
adapter
Extension Pipe
P-100P
Inner diameter ø70
Interlocked with
Mr. Slim indoor units
Outer diameter ø75
Optional parts
M75
OA Processing
Units
RDH3 Series
RD3 Series
Ideal Indoor-Air Quality — For Your Comfort and Health
A Total Air Conditioning Package Manifesting Remarkable Power
The OA (outdoor-air) Processing Unit creates an optimum indoor-air environment at an unparalleled rate of cost
efficiency providing substantial energy savings. Forced air ventilating and humidifying functions unique to this system
keep indoor-air fresh and free of contaminants preventing “sick building syndrome” and the spread of airborne viruses
such as the flu. Another novel feature of the OA Processing Unit is the “Lossnay core,” a heat-exchange unit that
functions to transfer heat efficiently, cutting ventilation load by as much as 70%. This special combination of functionality
and performance designed to ensure users ample comfort and year-round health which cannot be found anywhere else
on the market.
Lossnay Ventilation and Air Conditioning
1. When the load is light Main air conditioning
2. When the load is heavy Supplemental air conditioning
OA (Outdoor air)
Fresh, outdoor-air in a quantity
required for ventilation is drawn
in by the supply fan.
EA (Exhaust air)
Heat from the indoor air (both sensible
and latent) is recovered by the Lossnay
Core and vented outside by the
exhaust fan.
The exhaust fan
High efficiency filters (Option)
The supply fan
Heat recovery unit
(Lossnay Core)
Temperature and humidity are
exchanged between the supply
air and the exhaust air.
OA (Outdoor air)
Fresh, outdoor-air in a quantity
required for ventilation is drawn
in by the supply fan.
RA (Return air)
The exhaust fan draws
in contaminated indoor-air.
SA (Supply air)
The processed, fresh outdoor-air
is vented to the indoor rooms.
Maintenance cover
Air filter
Prevents clogs in
the Lossnay Core.
DX Heat exchanger
Cools or heats the drawn
in outdoor-air.
The OA (outdoor-air) Processing Unit creates an optimum environment while providing substantial energy savings. The
OA Processing Unit comprises forced air ventilation, heat recovery, heating and cooling, and air purification. This total air
conditioning system keeps indoor air fresh and comfortable all year round, and keeps it free of contaminants preventing
ailments such as sick building syndrome. Inside the OA Processing Unit is the Lossnay Core, a heat-exchange unit that
transfers heat efficiently, cutting ventilation load by as much as 70%. A remarkable product found nowhere else, this
special combination of functionality and performance contained within a single unit ensures users ample comfort, good
health, and energy savings.
EA (Exhaust air)
Heat from the indoor air (both sensible
and latent) is recovered by the Lossnay
Core and vented outside by the
exhaust fan.
The exhaust fan
High efficiency filters (Option)
The supply fan
RA (Return air)
The exhaust
fan draws in
contaminated
indoor-air.
Heat recovery unit
(Lossnay Core)
Temperature and humidity are
exchanged between the supply
air and the exhaust air.
Permeable-film humidifier
Humidifies the drawn in outdoor-air as is necessary
to produce a comfortable indoor environment.
Maintenance cover
Air filter
Prevents clogs in
the Lossnay Core.
Comfortable Level of Humidity for Exceptionable
Air Quality
The OA Processing Unit is equipped with a new permeable film humidifier
developed and patented by Mitsubishi Electric. Steam transmission efficiency
has been improved remarkably by lowering the resistance of the material. The
use of a 3-layer film that allows only the transfer of steam prevents the
production of white powder, so there is no need for the use of a water purifier.
Highly Efficient Humidification
Improvements in the system of airflow patterns and water injection techniques
have resulted in a substantial increase in humidifying volume.
SA (Supply air)
The processed, fresh
outdoor-air is vented
to the indoor rooms.
DX Heat exchanger
Cools or heats the drawn
in outdoor-air.
New Permeable Film Humidifier (RDH3 model)
Outdoor
air
Ultra-water
repellant
cell-based
water-vapor
transmission
filter
Humidified air
The Air Conditioning Function
Two Units in One
Temperature simulation (Example : GUF-50RD3)
Water
Ultra-water
repellant
cell-based
water-vapor
transmission
filter
Spacer
3-dimensional
cloth
Steam
New filter
Water
Along with Lossnay ventilation, the OA Processing
Winter
Summer
Unit is really two units in one, functioning as the
main air conditioner when the load is light and
Lossnay Core
Lossnay Core
adding supplemental air conditioning when the
DX coil
DX coil
load is heavy. Also, with ventilation and air
10.2°C
33.2°C
42.6°C Fresh warm air
15.8°C Fresh cool air
Stale hot air
Stale cool air
(500m /h) (indoor supply air)
(500m /h) (indoor supply air)
(exhaust)
(exhaust)
conditioning integrated, space is saved and
21.0°C
27.0°C
7.0°C
35.0°C
Stale warm air (indoor air)
Stale cool air (indoor air)
installation expense kept to a minimum. Wha'ts
Fresh cool air
Fresh hot air
(outdoor air) GUF-50RD3
(outdoor air) GUF-50RD3
more, the air temperature in any room can be
perfectly adjusted to the desired
temperature of the occupants via the OA Processing Unit, which can be used as the indoor unit of the CITY MULTI air
conditioning system. The heat recovery function maximizes efficiency and saves energy, benefiting the environment and
helping companies cut costs. It also reduces the refrigerant load and lowers the amount of horsepower required by the
3
3