Whirlpool Ultra Low Nox Gas Water Heater with the Flame Guard Safety System Specifications

renovation . rehabilitation . new construc tion .
alue
Guide
$
a value engineering workbook for cost effective solutions
September 29, 2011
Version 1.0
1
Michigan Manufacturers 2
Products 3
Product Recommendations
Sustainable Sites
Water Efficiency
Energy and Atmosphere
Indoor Environmental Quality
Material Resource
Operations and Maintenance
3a
3b
3c
3d
3e
3f
renovation . rehabilitation . new construc tion .
table of contents
Environmentally Preferable
Standards for Environmentally
Preferable Paints and Coatings
Low Emission Adhesives
and Sealants
renovation . rehabilitation . new construc tion .
product
recommendations
Siding or masonry
Flooring
Framing
Cement
Framing
Paints and Coatings
Decking or patio material
Cabinets
Counters (kitchen and bathroom)
Doors (not including garage or insulated doors)
Trim
Window Framing
Framing
Roofing
Insulation
Sheathing
Exterior Wall
Floor
Floor
Foundation
Interior Wall
Interior Wall and Ceilings and Millwork
Landscape
Other
Other
Other
Other
Other
Roof
Roof
Roof and Floor and Wall
Roof, Floor, Wall
Value Guide
*Adapted from LEED for Home Rating System Material and Resources (MR) Table 24
Framing/wall structure
Exterior Wall
Version 1.0 09/28/11
Recycled content of 20% or more. Comply with California practice for testing VOCs from building materials using small
chambers (www.dhs.ca.gov/ehlb/IAQ/VOCS/practice.htm)
Recycled content, FSC-certified or reclaimed
Recycled content, FSC-certified or reclaimed
FSC certified
Recycled content
Recycled content, FSC-certified or reclaimed AND composite materials must contain no added ureaformaldehyde resins
Recycled content, FSC-certified or reclaimed
Recycled content, FSC-certified or reclaimed AND composite materials must contain no added ureaformaldehyde resins
Recycled content, reclaimed, or FSC certified
Linoleum, cork, bamboo, FSC certified or reclaimed wood, sealed concrete, recyled-content flooring, or combination, carpe
and pads should comply with carpet and rug institutes green label plus program. Hardwood flooring should be SCS floor
score certified.
FSC certified or reclaimed
Use 30% fly ash or slag
FSC certified or reclaimed
Recycled paint that meets Green Seal standard GS-43
Recycled content, FSC-certified or reclaimed, recycled content
Recycled content, FSC-certified or reclaimed AND composite materials must contain no added ureaformaldehyde resins
Concrete wall structure: Use 30% fly ash or slag wood frame: FSC certified or reclaimed or finger joint studs
Specifications
Environmentally Preferable Product Specifications*
Component
Assembly
Standards for Environmentally Preferable Paints and Coatings*
Applicable Standard
(VOC Content)
Component
Reference
Architectural paints, coatings and
primers applied to interior walls and
ceilings
Anticorrosive and antirust paints
applied to interior ferrous metal
substrates
Flats: 50 g/l
Nonflats: 150 g/l
Clear wood finishes
Varnish: 350 g/l
Laquer: 550g/l
South Coast Air Quality
Management District Rule
1113, Architectural Coatings
Floor coatings
100 g/l
South Coast Air Quality
Management District Rule
1113, Architectural Coatings
Sealers
Waterproofing: 250 g/l
Sanding: 275 g/l
All others: 200 g/l
South Coast Air Quality
Management District Rule
1113, Architectural Coatings
Shellacs
Clear: 730 g/l
Pigmented: 550 g/l
South Coast Air Quality
Management District Rule
1113, Architectural Coatings
Stains
250 g/l
South Coast Air Quality
Management District Rule
1113, Architectural Coatings
250 g/l
Green Seal Standard GS-11
Paints, 1st Edition May 20,
1993
Green Seal Standard GC-03,
Anti-Corrosive Paints, 2nd
Edition, January 7, 1997
*Adapted from LEED for Home Rating System Material and Resources (MR) Table 25
Value Guide
Version 1.0 09/28/11
Standards for Low Emission Adhesives and Sealants*
Applicable Standard
VOC Content g/l Less Water
Architectural Applications
Indoor carpet adhesives
Carpet pad adhesives
Wood flooring adhesives
Rubber floor adhesives
Subfloor adhesives
VCT and asphalt adhesives
Drywall and panel adhesives
Cove base adhesives
Multipurpose constrution adhesives
Structural glazing adhesives
Specialy application
PVC welding
CPVC welding
ABS welding
Plastic cement welding
Adhesive primer for plastic
Contact adhesive
Special-purpose contact adhesive
Structural wood member adhesive
Sheet-applied rubber lining operations
Top and trim adhesive
Substrate-specific applications
Metal to metal
Plastic foams
Porous materials (except wood)
Wood
Fiberglass
Sealants
Architectural
Nonmembrane Roof
Roadway
Single-ply roof membrane
Other
Sealant Primers
Architectural non-porous
Architectural porous
Other
50
50
100
60
50
50
50
50
70
100
510
490
325
250
550
80
250
140
850
250
30
50
50
30
80
250
300
250
450
420
250
775
750
* Adapted from LEED for Home Rating System Material & Resource (MR) Table 26
Value Guide
Version 1.0 09/28/11
USGBC Member Directory
Michigan Based Product
Manufacturers
renovation . rehabilitation . new construc tion .
michigan
manufacturers
USBGC Member Directory
Michigan Based Product Manufacturers
Organization Name
Product Type
American Dryer, Inc.
AZON USA INC.
Case Systems, Inc.
Chem Link Inc.
Connor Sports Flooring
Cycle-Safe, Inc
Dow Corning
Duo-Gard Industries Inc.
East Jordan Iron Works
GLE Solar Energy
Grabil Windows & Doors
Haworth Inc.
HCi-Hydronic Components Inc.~Jomar Group
Herman Miller, Inc.
Holcim (US) Inc.
Horner Flooring
Landscape Forms
LiveRoof, LLC
Hand Dryers
Windows
Casework
Sealants
Flooign
Bicycle Parking
Silicones
Translucent Daylighting Systems
Manholes
Water Heaters
Windows/Doors
Furniture
HVAC supplies
Furniture
Cement
Flooring
Exterior Furniture
Green Roof
Midwest Cushion Brokers II Inc
Milliken & Co
Nathan Allan Glass Studios
Nextek Power Systems
Noble Company
Nu-Wool Co., Inc.
Oscoda Plastics, Inc.
Pleotint LLC
Polly Products
SELECT Hinges
Steel Stud Solutions, LLC
Temo, Inc.
The Dow Chemical Company
The Tapco Group
ThermalNetics, Incorporated
TMC Furniture, Inc.
Tubelite Inc.
Venchurs Inc
Wacker Neuson Climate Technology
Transporting
Carpet
Glass Forms
Power Supply
Sealants
Insulation
Flooring
Window Tint
Exterior Furniture
Hinges
Steel Studs
Sunrooms
Power Supply
Exterior Materials
HVAC supplies
Furniture
Aluminum
Packaging
Climate Control
* US Green Building Council (USBGC) Member Directory as of 09/28/11 sorted by Michigan based Product Manufacturers (www.USGBC.org)
Value Guide
Version 1.0 09/28/11
renovation . rehabilitation . new construc tion .
products
Sump Pump Cover
renovation . rehabilitation . new construc tion .
sustainable
sites
Ak Industries AKP80009 Sump Pit Cover 20-1/2"
Page 1 of 1
VIEW CART | GIFT CERTIFICATES
Operated by AG Lock & Hardware An Ace Hardware Dealer in Brooklyn, NY
1-(212)-400-7488 / 1-(877)-289-9760
ITEMS: 0
Search
Sign In
Order Status
Browse By Manufacturer
Browse By Category
Browse By Brand
COST: $ 0.00
Search by keyword...
Online RMA
Submit
Contact Us
HOME > PLUMBING SUPPLIES AND FIXTURES > SUMP/UTILITY PUMPS > SUMP BASINS/COVERS
Product Detail
Ak Industries AKP80009 Sump Pit Cover 20-1/2"
$13.93 for Each
Product Rating:
Write a Review
Other products of Ak Industries
ACE# 4012621
MFR# AKP80009
Qty :
1
List Price: $13.93
In stock, normally ships within one to two business days
Product images may differ from actual product appearance.
Overview
Also Bought
Review
"AK INDUSTRIES" SUMP PIT COVER
z
z
z
z
20-1/2"
Polyethylene sump basin cover
One hole for discharge pipe
Four bolt holes for fastening cover to basin if desired
Please Note: This web site is owned and operated by AG Lock and Hardware, an independently owned and operated Ace Hardware retailer located in Brooklyn, NY. Neither Ace Hardware Corporation nor
any other Ace Hardware retailer is responsible for the operation of this web site or for online purchases made by you. Any product returns must be made in accordance with this web sites Return Policy and
not to any other Ace Hardware retail store. Prices at independently owned and operated Ace retail stores may vary.
ABOUT US
TERMS AND CONDITIONS
SHIPPING FROM WAREHOUSE ACROSS US
We are an authorized Ace Hardware Dealer in Brooklyn, NY.
Copyright 2002-2011. All rights reserved.
RETURNS POLICY
PRIVACY STATEMENT
HAVING PROBLEMS WITH OUR SHOPPING CART
If you need assistance with ordering or experiencing website problems please email us at
http://www.acehardwareoutlet.com/productDetails.aspx?SKU=4012621
sales@acehardwareoutlet.com
8/11/2011
Lavatory Faucet
Kitchen Faucet
Toilet (1.1 gpf )
Toilet (1.3 gpf )
Toilet (Dual flush)
Showerhead
Dishwasher
Washer
Dryer
Rain Barrel
Garbage Disposal
renovation . rehabilitation . new construc tion .
water
efficiency
COLONY
SINGLE CONTROL LAVATORY FAUCET
MODEL NUMBER:
2175.200 Colony Single Control Centerset
Metal Lever Handle. 50/50 Pop-up drain.
2175.202 Colony Single Control Centerset
Metal Lever Handle. Metal Pop-up drain.
2175.205 Colony Single Control Centerset
Metal Lever Handle. Less drain. With pop-up hole, plug
button and rod.
85mm
(3-1/4")
2175.200 Shown
121mm
(4-3/4")
76mm
(3")
41mm
(1-5/8")
HOLE
SIZE
29mm
(1-1/8")
25mm
(1")
102mm
(4")
153mm
(6-1/16")
36mm
(1-7/16")
107mm
(4-3/16")
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Single control lavatroy faucet on 4" centers. Washerless
40mm ceramic disc valve cartridge. Cast brass waterway
with 1/2" male threaded brass inlet shanks. Metal body.
Notched underbody to receive chain and stopper. 1.5
gpm/5.7L/min. maximum flow rate. Metal lever handle with
large “comfort zone”.
Cast Brass Waterways with “City Shanks”: Strong and
durable. Integral tabs on casting provide a wobble-free
installation.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Longer Spout: Provides extended reach into lavatory.
Memory Position Valving: Allows user to turn valve on
and off at preferred temperature setting without readjusting
handle position each time.
Large “Comfort Zone”: Allows easy fine tuning of
temperature.
Simple Installation: Fast and easy one person installation.
Faucet drops in from top. Quick spin nuts secure faucet in
place.
SUGGESTED SPECIFICATION:
Single control lavatory fitting shall feature cast brass waterways. Shall also feature washerless 40mm ceramic disc valve
cartridge. Fitting shall be American Standard Model # 2175.____.____.
© 2008 AS America Inc.
C29
COLONY
SINGLE CONTROL LAVATORY FAUCET
CODES AND STANDARDS
FLOW RATE*
2.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B 125
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Finish
Polished
Chrome
Product
Number
Description
2175.200
Colony Single Control Centerset. 50/50 Pop-up drain.
002
2175.202 Colony Single Control Centerset. Metal Pop-up drain.
2175.205 Colony Single Control Centerset. Less drain. With pop-up hole and rod.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
© 2008 AS America Inc.
C30
WELLWORTH®
Features
•
•
•
•
•
•
•
•
•
•
•
PRESSURE LITE® 1.0 TOILET
K-3531
12″ (30.5 cm) rough-in
Polished chrome trip lever
Less seat and supply
Vitreous china
1 gpf (4 lpf)
Equipped with Sloan FLUSHMATE® – Sloan® Valve
Company
Combination toilet
Optional bedpan lugs or tank cover locks
Elongated bowl
11-1/2″ (29.2 cm) x 9-1/2″ (24.1 cm) water area
30-1/8″ (76.5 cm) x 21-1/4″ (54 cm) x 29-1/4″
(74.3 cm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
• ASME A112.19.2/CSA B45.1
• EPA WaterSense®
Colors/Finishes
• 0: White
• Other: Refer to Price Book for additional colors/finishes
Accessories
• CP: Polished Chrome
• PB: Polished Brass
• Other: Refer to Price Book for additional colors/finishes
Specified Model
Model
K-3531
K-3531-RA
K-3531-T
K-3531-TR
Description
Elongated bowl
Elongated bowl
Elongated bowl
Elongated bowl
toilet
toilet
toilet with tank cover locks
toilet with tank cover locks
Trip Lever
left-hand
right-hand
left-hand
right-hand
Colors/Finishes
❑0
❑
❑0
❑
❑0
❑
❑0
❑
Optional Accessories
K-9481-L
Trip lever, left-hand (non-CP)
K-9481-R
Trip lever, right-hand (non-CP)
Recommended Accessories
K-4650
French Curve® seat with cover
K-4664
BreviaTM seat with cover
K-7637
Angle supply with stop – 3/8″ NPT
Page 1 of 2
1054184-4-D
❑ PB
❑ PB
Other_____
Other_____
Other_____
Other_____
❑ Other_____
❑0
❑0
❑ CP
❑ PB
❑ Other_____
❑ Other_____
❑ Other_____
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
WELLWORTH®
Product Specification
The elongated combination toilet shall be made of vitreous china. Toilet shall be 30-1/8″ (76.5 cm) in length, 21-1/4″ (54 cm)
in width, and 29-1/4″ (74.3 cm) in height with a 11-1/2″ (29.2 cm) x 9-1/2″ (24.1 cm) water area. Toilet shall be 12” (30.5 cm)
rough-in and less seat and supply. Toilet shall include a polished chrome trip lever. Toilet shall have a 1.0 gal (4.0 L) per flush.
Toilet shall be equipped with Sloan Flushmate® - Sloan Valve Company. Toilet shall have optional bedpan lugs or tank cover
locks and available with right or left hand trip lever. Toilet shall be Kohler Model K-3531-_______.
Technical Information
Fixture:
Configuration
Water per flush
Passageway
Water area
Water depth from rim
Seat post hole centers
Maximum static pressure required
Maximum static pressure
two-piece,
elongated
1.0 gpf (4.0 lpf)
2-1/4″ (5.7 cm)
11-1/2″ (29.2 cm) x
9-1/2″ (24.1 cm)
5-5/8″ (14.3 cm)
5-1/2″ (14 cm)
35 psi (241 kPa)
80 psi (551.6 kPa)
Included components*:
Bowl
Tank
Tank cover
Bolt cap accessory pack
Tank accessory pack
Trip lever, left-hand
Trip lever, right-hand
* Equipped with Sloan Flushmate® Company
K-4303
K-4484
1036375
52048
73062
K-9481-L
K-9481-R
Sloan Valve
Installation Notes
Install this product according to the installation guide.
1"
(2.5 cm)
21-1/4" (54 cm)
30-1/8" (76.5 cm)
Front of Bowl
3-5/8"
(9.2 cm)
15"
(38.1cm)
12" (30.5 cm)
17-1/4"
(43.8 cm)
29-1/4"
(74.3 cm)
5" (12.7 cm)
8"
(20.3 cm)
CL of Outlet
6" (15.2 cm)
3/8" NPT Supply
Product Diagram
WELLWORTH® PRESSURE LITE® 1.0 TOILET
Page 2 of 2
1054184-4-D
9-7/8"
(25.1 cm)
COMPACT CADET® 3 FloWise ® RIGHT HEIGHT™
ELONGATED ONE-PIECE TOILET
VITREOUS CHINA
COMPACT CADET® 3 FloWise® RIGHT HEIGHT™
ELONGATED ONE-PIECE TOILET WITH SEAT
❑ 2403.128
FINISHED WALL
724mm
(28-1/2")
16 ± 6mm
(5/8" ± 1/4")
381mm
(15")
159mm
(6-1/4")
C/L OF SEAT POST
HOLES 140mm
(5-1/2") CENTERS
422mm
(16-5/8")
79mm
(3-1/8")
•Vitreous china
•Meets definition for HET (High Efficiency Toilet)
•High Efficiency (4.8 Lpf/1.28 gpf)
• Meets EPA WaterSense ® criteria
• Space saving compact design - Elongated Right Height bowl fits in the same space as
a round front toilet
• EverClean® surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Featuring the Cadet ® 3 Flushing System
•One-piece design
•Elongated siphon action jetted bowl with
2-1/8" trapway
•Internal trapway area fully glazed
•Rim height at 419mm (16-1/2") for accessible application
•Includes color-matched and design-matched
solid plastic toilet seat and cover with slowclose hinges and EverClean® surface.
Seat features unique sanitary seat lift tab
• Oversized 3" Flush Valve with Chemical
Resistant Flapper
• 10" x 8" water surface area
•2 bolt caps
• Chrome Trip Lever
•100% factory flush tested
• 5 year warranty
419mm
(16-1/2")
724mm
(28-1/2")
SUPPLY
AS
REQ'D
❑ 2403.513 Same as above, except with
Aquagurad liner in tank
❑ 2403.813 Same as above, except with
trip lever on right side
❑ 2403.328 Same as above, less seat
Nominal Dimensions:
724 x 394 x 724mm (28-1/2" x 15-1/2" x 28-1/2")
Fixture only, supply by others
267mm
(10-1/2")
305mm
(12")
140mm
* (5-1/2")
292mm
(11-1/2")
C/L OF OUTLET
241mm
(9-1/2")
FINISHED
FLOOR
394mm
(15-1/2")
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixtures
• US EPA WaterSense ® Specification for HET's
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
To Be Specified:
❑ Color:
❏ White ❏ Bone ❏ Linen ❏ Black
❑ Supply with Stop:
Certified by
IAPMO R&T
© 2010 AS America Inc.
K25
Revised 10/10
CST412MF
Aquia® Close Coupled Toilet, 1.6GPF & 0.9GPF
FEATURES
• Dual-Max® flushing system, low consumption
(1.6GPF/6.0LPF & 0.9GPF/3.4LPF)
• Elongated bowl
• Universal Height
• Close coupled, elongated front bowl and tank set,
less toilet seat
• Chrome push-button
• 12" Rough-in
MODELS
• CST412MF
COMPONENTS
• CT412F - Elongated Front Bowl
• ST412M - Tank and Cover only
• SS204 SoftClose® seat (sold separately)
• SS114 SoftClose® seat (sold separately)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
CODES/STANDARDS
•
PRODUCT SPECIFICATION
The two-piece, universal height, low consumption
Dual-Max flushing system toilet shall be
1.6GPF/0.9GPF. Toilet shall have high-profile tank,
elongated front bowl and chrome push-button. Toilet
shall be TOTO Model CST412MF____.
•
•
•
•
Meets or exceeds ASME A112.19.2/CSA B45.1,
ASME A112.19.14
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Efficiency Ordinance
ADA compliant
(center mount actuator/trip lever is approach side neutral*)
* consult with your local jurisdiction for special requirements
CST412MF
Aquia® Close Coupled Toilet, 1.6GPF & 0.9 GPF
SPECIFICATIONS
INSTALLATION NOTES
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
•
•
•
•
•
•
•
•
•
Water Use
1.6 GPF & 0.9GPF
(6.0 LPF & 3.4LPF)
Flush System
Dual-Max
Min. Water Pressure 8 psi (flowing)
Water Surface
6" x 4-1/2"
Trap Diameter
2-1/8"
Rough-in
12"
Trap Seal
2-1/8"
Warranty
One Year Limited Warranty
Material
Vitreous china
Shipping Weight
CT412F - 80lbs
ST412M - 30lbs
Shipping Dimensions CT412F
30-3/4" L x 17-3/8" W
x 20-1/2" H
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST412M
17-1/4" L x 7-7/8" W
x 17-1/2" H
5-1/2"
(140mm)
14-1/4"
(362mm)
18-1/2"(470mm)
27-1/2"(700mm)
15-3/8"
(390mm)
3/4" (19mm)
(7
31-1/4"
(794mm)
17-1/8"
(435mm)
16-1/8"
(410mm)
12" (305mm)
6"
(152mm)
7-3/4"
(197mm)
10"
(254mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00455 V.03
Printed in U.S.A. | © TOTO USA 12/09 | Printed on recycled paper ƛ
FORTÉ®
Features
•
•
•
•
•
•
MULTI-FUNCTION SHOWERHEAD
K-10240
3-function showerhead with wide coverage, medium
coverage, and concentrated spray options
1.75 gpm (6.6 L) per minute flow rate
5-15/16″ (15.1 cm) diameter showerhead
Complements Forté® Suite
MasterCleanTM spray nozzles to prohibit mineral
build-up for easy cleaning
1/2″ - 14 NPT connection
Codes/Standards Applicable
Specified model meets or exceeds the following:
• ASME A112.18.1/CSA B125.1
• EPA WaterSense®
Colors/Finishes
• CP: Polished Chrome
• Other: Refer to Price Book for additional colors/finishes
Accessories
• CP: Polished Chrome
• Other: Refer to Price Book for additional colors/finishes
Specified Model
Model
K-10240
Description
Multi-function showerhead
Recommended Accessories
K-7397
Shower arm and flange – 7-1/2″ (13.7 cm) length, 1/2″ NPT
Colors/Finishes
❑ CP
❑ Other ____
❑ CP
❑ Other ____
Product Specification
The showerhead shall feature a Masterclean sprayface nozzles to prohibit mineral build-up for easy cleaning. Showerhead shall
have a 5-15/16″ (15.1 cm) diameter showerhead and a 1/2″-14 NPT connection. Showerhead shall feature a 1.75 gpm (6.6 L)
per minute flow rate. Showerhead shall be available with a 3-function showerhead with wide coverage, medium coverage and
concentrated spray options. Showerhead shall complement Forte suite. Showerhead shall be Kohler Model K-10240-____.
Page 1 of 2
1101925-4-B
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
FORTÉ®
Installation Notes
Install this product according to the installation guide.
1/2"-14 NPT
4-11/16"
(11.9 cm)
5-15/16" (15.1 cm) D.
Product Diagram
FORTÉ® MULTI-FUNCTION SHOWERHEAD
Page 2 of 2
1101925-4-B
Product Detail Page
CHAT
Page 1 of 5
FIND A RETAILER
OUTLET STORE
LAUNDRY
home
kitchen
RECALL INFO
KITCHEN
dishwasher & cleaning
dishwashers
SIGN IN OR REGISTER
WHOLE HOME
traditional console
FAVORITES (0)
CART (0)
search whirlpool.com
FILTERS & ACCESSORIES
du811swpu
OWNER CENTER
print
share
contact
ENERGY STAR® Qualified Built-In Dishwasher
Model DU811SWPU Rating:
Write the first review
we also recommend
pan
Zoom
reset
Overview
Features
add to favorites
Reversible Panel
MSRP $289.00
see more photos
Specifications
where to buy
add to compare
Ratings & Reviews
Parts & Accessories
Configuration and Overview
Fully Integrated/Console :
6"
Manuals & Literature
Product Dimensions
24 7/8
34 3/8
Energy and Eco-Friendly
Resource Saver :
DuraWash™
Energy Star® Qualified :
Yes
23 7/8
Dimensions are for planning purposes only.
For complete information, visit owner center.
Style and Extras
Interior Finish :
Plastic
Silverware Basket :
Silverware Basket in the Door
Sound Package :
"I" Blanket
http://www.whirlpool.com/-[DU811SWPU]-1001258/DU811SWPU/
8/11/2011
Product Detail Page
Page 2 of 5
Cycle and Options
Heated Dry Option :
Yes
Number of Cycles :
5
Dimensions
Width :
23 7/8
Height :
34 3/8
Depth :
24 7/8
LAUNDRY
HE Top-Load Washers
HE Front-Load Washers
Traditional Top-Load Washers
Dryers
Laundry Pairs
REFRIGERATION
French Door
Side-By-Side
Bottom Freezer
Top Freezer
COOKING
Ranges
Wall Ovens
Cooktops
Microwaves
WHIRLPOOL® BRAND CARES
Habitat for Humanity
WHIRLPOOL®
CORPORATION
Press & News
Investors
Careers
ADDITIONAL RESOURCES
Whirlpool® Eco
& ENERGY STAR®
Chat
Store Locator
Glossary
Contact Us
DISHWASHERS &
CLEANING
Dishwashers
Compactors
Disposers
ACCESSORIES
Laundry Accessories
Kitchen Accessories
Whole Home
Accessories
Water Filters
WHOLE HOME
Water Heaters
Water Softeners
Water Coolers
Central Heating &
Air Conditioning
Water Filtration Systems
CONNECT WITH US
OWNER CENTER
Product Registration
Manuals & Literature
Schedule Repair
Product Help
Service Plan
Product Recalls
Replacement Parts
Whirlpool® Brand
Outlet Store
Commercial Laundry
About Whirlpool® Brand
® Registered trademark/TM Trademark of Whirlpool, U.S.A. © 2011 Whirlpool Corporation. All Rights Reserved. All other trademarks are owned by their respective companies.
http://www.whirlpool.com/-[DU811SWPU]-1001258/DU811SWPU/
Terms of Use
|
Privacy
8/11/2011
GE® Tall Tub Built-In Dishwasher
Model# GLD2800VWW
FEATURES
Style
Tub and Door Liner
Tub Type
Control Type
Dishwasher Control Features
Wash System
Wash System Features
Sensor
Wash Arms
Water Filtration System
• 5-stage filtration with Piranha™ hard food disposer - 5
self-cleaning filters ensure clean dishes
• Dedicated silverware jets - Highly pressurized spray jets
target the silverware area for improved cleaning
• 4-level towerless wash system - 2 wash arms with
4 wash levels quietly direct water onto dishes for a
powerful clean
• CleanSensor™ - A highly sensitive laser continually
monitors the soil level and temperature in every cycle,
adjusting water and cycle times as needed for the
optimal cleaning results
• Natural convection heated dry option - A drying element
effectively dries dishes reducing the need to towel dry
after unloading
• 59 dBA sound level - 2 pump system minimizes sound
• ENERGY STAR® qualified and CEE Tier II rated - Meets
or exceeds federal guidelines for energy efficiency for
year-round energy and money savings
• Up to 12 place setting capacity white titanium racking
- Provides flexibility to wash a variety of dishes at once
and tall items in the lower rack with ease
• Deluxe silverware basket - Provides convenient space
and capacity to clean silverware efficiently
• Heavy wash - Great for heavily soiled dishes and
cookware
• Audible end-of-cycle signal - The dishwasher makes a
sound to tell you when the load is complete and dishes
are ready to unload
Built-In
PermaTuf®
Tall Tub
Electronic
5 Touchpads
Front Controls
1 "Clean" Cycle Progress Indicator
Start/Reset Pad
Last Cycle Memory
Audible End-of-Cycle Signal
4-Level
Towerless
Dual Pumps and Motors
Piranha™ Hard Food Disposer
CleanSensor™
2-Direct Feed
Lower
Middle
Number of Cycles
Dishwasher Cycles
Self-Cleaning 5-Stage Filtration with
ExtraFine™ Filter
Rinse Aid with Indicator and
Adjustment
2
Normal Wash
Number of Options
Dishwasher Options
2
Delay Start 2/4 Hr.
Dispenser
Rack Features
Racking System
Number of Place Settings
Upper Rack
Lower Rack
Dishwasher Drying Features
Exterior Style
Latch
Leveling System
Heavy Wash
Heated Dry On/Off
Deluxe Silverware Basket
Towerless
Titanium Colored Racks
Up to 12
Removable
Deluxe Plus
Towerless
Multi-Wattage Calrod Heater
Traditional
Squeeze
Leveling Legs
• 2/4-hour Delay Start - Wash dishes at your convenience
• Two-pump system - One efficient pump for washing/
rinsing and one powerful low-energy pump to remove
soils provide excellent wash performance with reduced
sound
Have more questions? Please contact 1-800-626-2005
GFWN1100LWW | GE® ENERGY STAR® 3.5 DOE Cu. Ft. Capacity Frontload Washe... Page 1 of 3
feedback
Advanced Search | Search Tips
Search
where to buy | en español | share
Home
Products
Service & Support
Rebates & Promotions
Kitchen Design Center
Recipes & Communities
Explore GE Brands
GEAppliances.com Home > Products > Front-Loading Washers > GFWN1100LWW
Email This Page
Printer-Friendly Page
GE® ENERGY STAR® 3.5 DOE Cu. Ft. Capacity Frontload Washer
Model #: GFWN1100LWW
MSRP
$749
Where to Buy
APPROXIMATE DIMENSIONS (WxHxD)
27 in x 41 1/2 in x 31 1/4 in See full dimensions
ENERGY STAR® Qualified
Meets or exceeds federal guidelines for energy efficiency for yearround energy and money savings
3.5 DOE cu. ft. stainless steel basket
Handles a king-size comforter or 24 full-size bath towels with ease
Load-sensing adaptive fill
Washer automatically fills with just the right amount of water for the
load
10 wash cycles
Discover a setting for almost every load, from heavy cottons to
casual synthetics
HydroMotion™ wash action
Reversing wash action offers great cleaning performance with
gentle wash motion
1000 RPM spin speed
Fast speeds remove more water during the spin cycle to minimize
drying time
To magnify, move your mouse over the image above.
SEE COMPLETE PRODUCT DETAILS
Additional Colors
Weights & Dimensions
Capacity
Power Ratings
Features
Warranty
Claims & Certifications
Appearance
LITERATURE & MANUALS
Quick Specs
Use and Care Manual
All documents are PDF files. You will
need Adobe Acrobat® Reader® to view.
Installation Instructions
ADDITIONAL COLORS
White
GFDN110ELWW
$749 MSRP
Energy Guide
White
GFWN1100LWW
$749 MSRP
White
GFDN110GLWW
$849 MSRP
CAD Download
hide capacity
- CAPACITY
PARTS & ACCESSORIES
Total Capacity (cubic feet)
3.5 cu ft
To purchase related parts & accessories:
Call 1-866-775-4557
- FEATURES
Shop online at the Parts & Accessories Store
Stain Wash
Speed Wash
Drain and Spin
2nd Rinse
Dispenser
Bleach Timed Flow-Thru™
Detergent (Liquid/Powder) Timed FlowThru™
Fabric Softener Timed Flow-Thru™
Locate a dealer near you
RELATED PRODUCTS
GE® 7.0 Cu. Ft.
Super Capacity
Electric Dryer
GFDN110ELWW
$749 MSRP
GE® Pedestal
SBSD137HWW
$219 MSRP
hide features
Washer Cycles
Control Type
Rotary-Electronic
Wash/Rinse
Temperatures
3
Wash/Spin Speed
Combinations
5
Washer Control Features
Digital Cycle Countdown
LED Cycle Status Lights
http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=SpecPage&Sku=...
8/11/2011
GFWN1100LWW | GE® ENERGY STAR® 3.5 DOE Cu. Ft. Capacity Frontload Washe... Page 2 of 3
Child Lock
End-of-Cycle Signal
GE® 7.0 Cu. Ft.
Super Capacity Gas
Dryer
GFDN110GLWW
$849 MSRP
YOU MIGHT ALSO LIKE
GE® ENERGY
STAR® 4.0 IEC Cu.
Ft. King-size
Capacity Frontload
Washer with
Stainless Steel
Basket
WBVH5300KWW
$799 MSRP
SERVICE & SUPPORT
Washers/Dryers Service & Support
Appliance Donation Center
Register Your Appliance
Contact Us
Water Levels
Automatic
Specialty Cycles
BasketClean™
Whites Cycle
Yes
Colors Cycle
Yes
Adaptive Capabilities
Load Size
Cottons Cycle
Whites
Number of Cycles
10
Style
Front-Loading
Wash Basket Type
Stainless Steel
Water Temp System
PerfecTemp™
Handwash Cycle
Yes
Optional Soil Levels
Heavy
Normal
Light
Additional Washer
Features
Fill and Drain Hoses Included
Leveling Legs
Maximum Spin Speed
1000 RPM
Receptacle Type
3-Prong Grounding
Extended Warranties
- CLAIMS & CERTIFICATIONS
hide claims & certifications
ENERGY STAR® Qualified
CEE Tier II
ADA Compliant
hide economical / quiet
- ECONOMICAL / QUIET
Quiet Package
Quiet-By-Design™
hide appearance
- APPEARANCE
Color Appearance
White
Door Style
Tinted Glass
Installation
Undercounter, Stacked, Side-by-Side, BuiltIn
hide weights & dimensions
- WEIGHTS & DIMENSIONS
Approximate Shipping
Weight
248 lb
Net Weight (lbs.)
232 lb
Overall Depth
31 1/4 in
Overall Height
41 1/2 in
Overall Width
27 in
Get installation instructions
- POWER / RATINGS
hide power / ratings
Circuit Breaker or Time
Delay Fuse
15 or 20 Amp
Motor Speeds
Variable (1000 RPM Max Spin Speed)
Volts/Hertz
120V; 60Hz
- ACCESSORIES
hide accessories
Optional Pedestal
Accessory
SBSD137HWW (Sold Separately)
Optional Stack Rack
GEFLSTACK (sold separately)
- WARRANTY
Labor Warranty
hide warranty
Limited 1-year entire appliance
Parts Warranty
Limited 1-year entire appliance
Warranty Notes
See written warranty for full details
Have more questions? Please contact 1-800-626-2005.
Where to Buy
Products
Contact Us
Corporate
Rebates & Promotions
Service & Support
Careers
Parts & Accessories
Product Recalls
Press Room
Find a Dealer
Site Map
Privacy Policy
Mobile
Update E-Mail Preferences
Terms of Use
GE Brands
Sign up for our newsletter:
Enter E-Mail Address
Go
Accessibility Statement
http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=SpecPage&Sku=...
8/11/2011
GFDN110ELWW | GE® 7.0 Cu. Ft. Super Capacity Electric Dryer | GE Appliances
feedback
Page 1 of 2
Advanced Search | Search Tips
Search
where to buy | en español | share
Home
Products
Service & Support
Rebates & Promotions
Kitchen Design Center
Recipes & Communities
Explore GE Brands
GEAppliances.com Home > Products > Electric Dryers > GFDN110ELWW
Email This Page
Printer-Friendly Page
GE® 7.0 Cu. Ft. Super Capacity Electric Dryer
Model #: GFDN110ELWW
MSRP
$749
Where to Buy
APPROXIMATE DIMENSIONS (WxHxD)
27 in x 41 1/2 in x 31 1/8 in See full dimensions
7.0 cu. ft. super capacity
Increased capacity is designed to make easy work of comforters
and towels
Sensor Dry Plus™
Continually monitors moisture levels to help clothes look better
longer
Four heat selections
Provide the right temperature for the right drying results
10 dry cycles
Ten cycles give you control over drying performance
Rotary electronic controls with cycle countdown display and
LED indicators
These controls are designed to simplify cycle selection and provide
accurate cycle times
Interior Dryer Light
Lets you see everything inside for easy loading and unloading
SEE COMPLETE PRODUCT DETAILS
To magnify, move your mouse over the image above.
Additional Colors
Weights & Dimensions
Capacity
Power Ratings
Features
Warranty
Claims & Certifications
Appearance
ADDITIONAL COLORS
LITERATURE & MANUALS
Quick Specs
Use and Care Manual
All documents are PDF files. You will
need Adobe Acrobat® Reader® to view.
White
GFDN110ELWW
$749 MSRP
White
GFWN1100LWW
$749 MSRP
White
GFDN110GLWW
$849 MSRP
Installation Instructions
hide capacity
- CAPACITY
CAD Download
Total Capacity (cubic feet)
7.0 cu ft
Unit Capacity
Super
PARTS & ACCESSORIES
hide features
- FEATURES
To purchase related parts & accessories:
Call 1-866-775-4557
Temperature Options
High/Medium/Low/Exra Low
Shop online at the Parts & Accessories Store
Control Type
Rotary-Electronic
Locate a dealer near you
Heat Selections
4
Moisture Sensor
Yes
RELATED PRODUCTS
GE® ENERGY
STAR® 3.5 DOE Cu.
Ft. Capacity
Frontload Washer
GFWN1100LWW
$749 MSRP
GE® Pedestal
SBSD137HWW
$219 MSRP
Speed Dry
Yes
Style
Front-Loading
Dual Thermistors
Yes
Additional Cycles
Mixed Load
Air Fluff
Extended Tumble
Delicates
90 Minute Timed Dry
Delicates Cycle
Yes
Optional Dryness Levels
More Dry
Dry
Less Dry
http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=SpecPage&Sku=...
8/11/2011
GFDN110ELWW | GE® 7.0 Cu. Ft. Super Capacity Electric Dryer | GE Appliances
YOU MIGHT ALSO LIKE
Timed Dry
GE® 7.0 Cu. Ft.
Super Capacity
Electric Dryer
DBVH520EJWW
$799 MSRP
SERVICE & SUPPORT
Washers/Dryers Service & Support
Appliance Donation Center
Register Your Appliance
Contact Us
Page 2 of 2
Yes
90 Minutes
Tumble Drying
Yes
Cottons Cycle
Yes
Number of Cycles
10
Drum Type
DuraDrum™
Exhaust Options
4-Way (Rear; Right; Left & Bottom)
Flexible Installation
Undercounter, Stacked, Side-by-Side
Fuel Type
Electric
Reverse-a-Door
Yes
Additional Dryer Features
Front Serviceable
Lint Filter with Reminder
Interior Light
Dryer Control Features
Cycle Countdown
LED Cycle Status Lights
Child Lock
Add Time
Clean Lint Filter Reminder Light
End-of-Cycle Signal
Extended Warranties
- CLAIMS & CERTIFICATIONS
hide claims & certifications
ADA Compliant
hide economical / quiet
- ECONOMICAL / QUIET
Quiet Package
Quiet-By-Design™
hide appearance
- APPEARANCE
Color Appearance
White
Door Style
Tinted Glass
hide weights & dimensions
- WEIGHTS & DIMENSIONS
Approximate Shipping
Weight
130 lb
Case Depth (in.)
25-1/2
Depth with Door Open 90°
(in.)
51-3/4
Height to Top of Case (in.)
36
Net Weight (lbs.)
120 lb
Overall Depth
31 1/8 in
Overall Height
41 1/2 in
Overall Width
27 in
Get installation instructions
- POWER / RATINGS
Volts/Watts/Amps
hide power / ratings
240V,5600W,24A,60Hz or
208V,4400W,22A,60Hz
- ACCESSORIES
hide accessories
Optional Pedestal
Accessory
SBSD137HWW (Sold Separately)
Optional Stack Rack
GEFLSTACK (sold separately)
- WARRANTY
Labor Warranty
hide warranty
Limited 1-year entire appliance
Parts Warranty
Limited 1-year entire appliance
Warranty Notes
See written warranty for full details
Have more questions? Please contact 1-800-626-2005.
Where to Buy
Products
Contact Us
Corporate
Rebates & Promotions
Service & Support
Careers
Parts & Accessories
Product Recalls
Press Room
Find a Dealer
Site Map
Privacy Policy
Mobile
Update E-Mail Preferences
Terms of Use
GE Brands
Sign up for our newsletter:
Enter E-Mail Address
Go
Accessibility Statement
Employee & Retiree Store
Copyright 2011 General Electric Company
http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=SpecPage&Sku=...
8/11/2011
Waste King Garbage Disposal - 2600 1/2 HP Legend Series Garbage Disposer - Wave Pl...
Page 1 of 2
Home :: Waste King - Disposals :: Waste King Garbage Disposal - 2600 1/2 HP Legend Series Garbage Disposer
Waste King Garbage Disposal - 2600 1/2 HP Legend Series Garbage Disposer
LARGER IMAGE
Product Description
Details
Customers Also Purchased
Reviews
Product Description
Waste King Garbage Disposer Legend Series 2600 1/2 HP Disposer
Waste King Garbage Disposal
Model : Waste King Legend 2600 1/2 H.P.
The Waste King Garbage Disposal Legend Series 2600 1/2 HP Disposer is one if the best food waste dispose
magnet motor, this disposer can get rid of all your gourmet waste. This disposer is also Septic Safe, making it
• Space saving compact design!
• High-speed 2600 r.p.m. permanent magnet motor produces more power per pound.
• Stainless steel grinding components.
• Fast and easy mount system provides a no hassle installation.
• Removable splash guard is included.
• Safe for properly sized septic tanks.
• Longest warranties in the industry demonstrates commitment to quality.
• 5 Year In-Home Service Warranty and Lifetime Corrosion Warranty.
Waste King Information
Waste King® EZ Mount Legend Series
Reasons to Buy Waste King® | Compare Waste King® | Dimension/Warranty Information Insert | Parts Brea
Instructions | Product Display Stuffer - Sales Sheet | W
Garbage Disposal Specs
Motor Horsepower:1/2 HP
Motor Speed R.P.M.:2600
Voltage:115
http://www.waveplumbing.com/store/index.php?main_page=product_info&manufacturers... 8/11/2011
Waste King Garbage Disposal - 2600 1/2 HP Legend Series Garbage Disposer - Wave Pl...
Page 2 of 2
Hz:60
Current-Amps:4.5
Motor Type:Permanent Magnet
Power CordIncluded
Sink Flange:Stainless Steel & Celcon
Stopper:Positive Seal
Splash Guard:Removable
Waste Elbow:ABS
Feed:Continuous
Grind Ring:Stainless Steel
Swivel Impellers:Stainless Steel
Turntable:Stainless Steel
Hopper:Glass Filled Nylon
Grinding Chamber:Corrosion Proof Glass Fille
Bearings:Permanently Lubricated; S
Overload Protector:Manual Reset Type
Sound Dampening Shell:Yes
Shipping Weight (lbs.):9.5
Optional Accessories: (in the box below)
You do not have to order this remote switch unless you don't want to use your wall switch or don't already have
switch. This fiber optic switch fits in your existing extra sink hole if available on your sink (for soap dispensers)
option as a convenience for our customers who want this popular item.
Fiber Optic Remote Switch - Model FRC-4017 (Click here for more info)
Model 4016 and 4017 (4017 shown). This is a package. 4016 is the unit and 4017 is the button. 4017 is include
Fiber Optic Remote Switches - 4017
Remote control switch installs in 5 minutes to your countertop, sink or cabinetry and is perfect for use with an is
optic remote switch has no wiring connections or code restrictions. We carry them in Chrome and Satin Nickel.
Chrome: FOS 4017-CH
Satin Nickel: FOS 4017-SN
Biscuit: FOS 4017-BIS
Sink Hole Adapters - 4018
Decorator colors match remote control buttons, fit into standard sink holes and allow for quick installation. We
Chrome: FOA 4018-CH
Satin Nickel: FOA 4018-SN
Product 4/10
http://www.waveplumbing.com/store/index.php?main_page=product_info&manufacturers... 8/11/2011
Boilers
Water Heater
Tankless Water Heating
Exhaust Fan and Light
Exterior Fixture with Photocell
Ceiling Fixture
Kitchen Ceiling Fixture
Wall Fixture
Occupancy Sensors
Induction Cooktop
Solar Water Heating
renovation . rehabilitation . new construc tion .
energy and
atmosphere
Natural or Propane Gas-Fired
Modulating Condensing Boilers
Quality Engineered for Efficiency and Dependability
UB95M-200 Series
95%
AFUE EFFICIENCY
The Value
of Efficiency
High efficiency is your solution
to today’s ever-increasing energy
costs. As an ENERGY STAR Partner,
Utica is proud to offer the
95% AFUE UB95M-200 gas-fired,
condensing, hot water boiler.
The UB95M-200 was the
first 95% AFUE boiler available.
Check with your local utility
company regarding the availability
of high efficiency rebates.
UB95M•200
Your leading value in...
Cost Saving Features
■
Infinitely Modulating Capacity
from 80 to 200 MBH
An advanced microprocessor control continuously
monitors supply and return water temperature,
adjusting boiler output to match building load –
ideal for applications with multiple zones.
■
Outdoor Temperature Reset
Additional savings with factory standard control,
which adjusts the water supply temperature for
best possible fuel economy based on actual
seasonal conditions.
■
Domestic Hot Water Priority
Used with an indirect hot water heater, the
UB95M saves energy by redirecting heat where
and when it’s needed. No waiting for hot water.
Annual Fuel Savings
The chart below can be used to estimate annual
fuel cost savings for space heating when replacing an
old inefficient boiler with a new condensing boiler.
AFUE EFFICIENCY
% OF ANNUAL FUEL
SAVINGS WITH A HIGH
EFFICIENCY BOILER
95%
Your Annual Fuel Savings Estimate
50%
40%
30%
20%
10%
0%
80%
75%
70%
65%
60%
55%
— YOUR OLD BOILER’S AFUE —
UB95M – 95% AFUE
UB90 – 90% AFUE
Reliability and Peace of Mind
■
15-Year Limited
Manufacturer’s Warranty
■
Optional Comfort Plus 5 or
10 Year Extended Parts and
Labor Warranty available.
Pressure Switches
Display Panel
Modulating Blower
UB95M-200
Installation Features
The “Dealer-Driven Design” of
the UB95M-200 is engineered with
installation flexibility and convenience
that benefit both the installer and
the homeowner.
● Intake & Flue gasses can be
Low Water
Cut Off Control
Swing Out
Control Panel
piped with readily available
3" PVC up to 100 equivalent feet.
● Option of left, right or rear exit for
return plumbing and gas piping.
● Piping connection options on rear
and top of units facilitate multiple
boiler installations with boilers
located in close quarters.
● Integral Condensate Trap
(No Field Assembly Required).
● Standard 115V convenience outlet.
Easily accessible
front mount controls.
Contractor Benefits
● EASY INSTALLATION.
● Ideal for high efficiency
Digital display/user interface for
real time operating diagnostics and
programming information.
replacement jobs, new homes,
radiant heating, and domestic
hot water applications.
100% factory tested
Low Pressure Drop,
ASME Certified Monoblock
Cast Aluminum Heat
Exchanger – lightweight
and corrosion resistant.
Factory installed, probe type, LWCO
accurately senses water level to help
prevent dry firing. Meets local codes
requirements.
UB95M•200
Natural or Propane Gas-Fired Modulating
Condensing Boiler
OPENING FOR
RELIEF VALVE
DISCHARGE PIPE
AIR VENT INTAKE
OPENING 2" NPT
(OPTIONAL)
GAS SUPPLY
OPENING
OPENING 1/2" NPT
(OPTIONAL)
1/2" NPT
(OPTIONAL)
STANDARD SUPPLY
OPENING 11/4" NPT
CONNECTIONS
PROVIDED INSIDE
BOILER CABINET
OPENING
FOR TEE
EXHAUST
(2" CVPC)
GAS SUPPLY
307/8"
18"
ELECTRICAL
CONNECTION FOR
120V POWER & 24V
THERMOSTAT LEADS
WATER RETURN
OPENING
11/4" NPT
LEFT SIDE
39 3/8"
WATER RETURN
OPENING 11/4" NPT
CONNECTION
(OPTIONAL)
TOP
AIR VENT INTAKE
OPENING 2" PVC
(OPTIONAL)
CONDENSATE
DRAIN OPENING
1/2" PVC
CONNECTION
(OPTIONAL)
FRONT
RIGHT SIDE
BACK
UB95M-200 RATINGS
MODEL
UB95M-200
INPUT (MBH)
HEATING CAPACITY
(MBH)
I=B=R NET
RATING (MBH)
AFUE
(%)
Max
200
190
165
95
Min
80
76
66
95
Specifications
■
■
■
■
■
■
■
■
■
Gas Fired Direct Vent Condensing Hot Water Boiler
Uses natural or LP gas
May be installed on combustible flooring
(No Carpets)
8" clearance to rear, 1" clearance to top, front,
left side, right side and base to combustible
construction
Option of left, right, or rear exit for return
plumbing and gas piping
8" clearance to side where exits for air intake,
gas, water and electrical installation
8" clearance to top, 24" clearance to front and left
side, 12" clearance to rear for service
0" clearance for vent and air intake pipes to
combustible clearances
Water content in heat exchanger is 2.6 gallons
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
SHIPPING
WEIGHT (LBS.)
3"
284
Standard Equipment
Connections
■
FLUE
DIAMETER
■
120 Volts AC, 60 hertz, 1 phase, less than 12 amps
Vent pipe and air intake pipe
• Vent Pipe - first 2.5 feet is schedule 80 2" CPVC
(provided), then schedule 40 3" PVC
• Air intake – schedule 40 3" PVC
Water In/ Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4" NPT
Gas In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" NPT
Condensate Drain . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" PVC
Vent length runs – minimum of 15 ft.
with a maximum of 100 equivalent ft.
■
■
■
■
Aluminum monoblock boiler with painted
metal and plastic jacket
High limit Aquastat
Circulator (Taco 007 or Grundfos)
Manual reset LWCO
Pressure gauge
Temperature display
30 psi ASME rated relief valve
Air purge vent
Service switch
Service receptacle outlet
Microprocessor based modulating control
Modulating burner
Modulating automatic gas valve
Modulating blower
Direct Spark Igniter
Manual Reset casting temperature switch
Air proving / blocked vent safety assembly
Integral condensate trap
Outdoor Temperature Sensor with cover
LP Conversion Kit standard
Options
■
■
Concentric Vent Kit
AMB Multiple Boiler Control – Outdoor reset, priority
override, lead boiler run time rotation. Available in
two sizes to allow stage firing of up to 8 Boilers
MEA #33906-E
An ISO 9001-2000 Certified Company
P.O. Box 4729 • Utica, New York 13504
Tel. 315-797-1310 • Fax 866-432-7329
E-mail: sales@uticaboilers.com
Web Site: www.uticaboilers.com
USA Contractor Assistance:
800-325-5479
PN 240006151 • 9/09
Whirlpool Water Heaters
Page 1 of 2
High Efficiency 40
Gallon Natural Gas
Water Heater
40G 12YR NG TALL ESTAR.70 WTRHTR
Model: PCG2J4040T3NOV Lowe's Item* #:
330876
Product Features
• FLAME LOCK® Safety System Reduces the Risk of
Accidental Fires Involving Flammable Vapors
• Advanced technology makes this the most efficient
conventional vent gas water heater
• .70 Energy Factor (EF) exceeds current ENERGY
STAR® requirements
• LCD interface provides self diagnostics as well as easy
temperature adjustment
•
Requires standard 120-volt power outlet (10 foot
Available exclusively at Lowe's
power cord included)
4/5
• Self Diagnostics – LED status indicator monitors
system status
Read 1 review
Write a review
• Electronic Ignition - eliminates nuisance pilot outage
issues associated with standing pilot models
• Customer Friendly Combination Gas Valve/Thermostat with Vacation Setting
• Low NOx
•
•
•
•
Features & Specs
Guides & Literature
Energy Efficiency
Rebate Finder
• Support Resources
• Ratings & Reviews
Features and Specs
•
•
•
•
•
•
•
•
•
Capacity 40 Gallons
Family Size 3-4
Warranty 12 Years
Gas BTU Input 40,000 BTU's
Energy Factor 0.70
Self Cleaning Yes
Tank Style Tall
Gas Type Natural Gas
High Altitude Certified from 0 to 10,100 Feet
Dimensions
Diameter 20"
Height 61.75"
http://www.whirlpoolwaterheaters.com/products/product.aspx?id=143
8/11/2011
Whirlpool Water Heaters
Page 2 of 2
Height with Draft
Hood 65.5"
Available at
Lowe's® Stores Nationwide
Professional Installation
available at Lowe's
Read all PCG2J4040T3NOV reviews
*Some items numbers may not be stocked in all Lowe’s Home Improvement Warehouse stores.
Some item numbers are available through special order only. Please consult the special order
catalog or any sales associate for assistance at any Lowe’s Home Improvement Warehouse
store.
© 2010-2011 American Water Heater
(877) 817-6750 Privacy
® Registered trademark/TM Trademark of Whirlpool, U.S.A. All other trademarks are owned by
their respective companies.
© 2010-2011 Whirlpool Corporation. All rights reserved.
http://www.whirlpoolwaterheaters.com/products/product.aspx?id=143
8/11/2011
imagine
RHEEM TANKLESS WATER HEATERS
never running out
of hot water again…
Tankless water heaters
Continuous hot water
continuous
1-2
BATHROOM
RTG-64 Series
2-3
BATHROOM
RTG-84 Series
3
BATHROOM
RTG-95 Series
HOMES*
HOMES*
HOMES*
hot water from Rheem
Indoor Direct Vent and Outdoor models.
RTG-64DV, RTG-64X – Natural or LP Gas.
Remote Control.
Indoor Direct Vent and Outdoor models.
RTG-84DV, RTG-84X – Natural or LP Gas.
Remote Control.
Indoor Direct Vent and Outdoor models.
RTG-95DV, RTG-95X – Natural or LP Gas.
Remote Control.
H95 Condensing Series
Indoor Direct Vent and Outdoor models.
RTGH-95DV, RTGH-95X – Natural or LP Gas.
Remote Control.
3
BATHROOM
OR
MORE
HOMES*
EZ-Link™ Cable System
Tankless installations are easily expandable. For high demand applications
you can connect two or more Rheem tankless units to operate together.
Contact dealer or factory for details.
Product appearance may differ.
* Based on simultaneous showers using 2.5 gallons per minute. Flow rates vary depending on temperature of cold water supply.
These selections are based on typical showers & faucets operating simultaneously at 65° F ground water.
Typical shower – up to 2.5 gallons of water flow per minute; typical faucets – up to 2 gallons of water flow per minute.
Model selections and availability are subject to change without notice.
Homeowners that purchase a qualified Rheem tankless water heater between
January 1, 2009 and December 31, 2010 are now eligible for a tax credit equal to
30% of the full purchase and installation price with a cap of $1,500.
For more information visit:
www.energytaxincentives.org/
general/legislative.php
Why tankless
gas water heaters
by Rheem?
CONTINUOUS HOT WATER…
when you need it. It’s that simple.
The popularity of luxury bathrooms is growing,
and so is the demand for large volumes of lowcost hot water. The Rheem Tankless provides a
compact solution for a continuous supply of
energy-efficient hot water that won’t run out.
continuous
hot water.
Bath, after bath, after bath.
ENERGY-EFFICIENT DESIGN…
low-cost operation.
Why keep 40-50 gallons of water hot when you
don’t need it? It’s expensive to continue to heat
and re-heat water when you’re not home or not
using it. Rheem’s tankless design offers
convenience without the high cost of keeping
water hot.
COMPACT SIZE…
good things do come in small packages.
Rheem Tankless is about one third the size of a
conventional water heater. Sophisticated
technology has reduced the size and increased
the features and benefits. A digital display makes
setting a precise water temperature, or monitoring
the unit’s status, a snap! Its compact size will
leave room for a water softener or extra storage.
PRECISE TEMPERATURE CONTROL
Many user and installer-friendly features make
the Rheem Tankless the easiest tankless water
heater to own. The digital display makes it
simple to set the water temperature. Simply
set the desired temperature and walk away.
Because the water is heated only when it is
needed, the outgoing water temperature
remains constant.
SELF-DIAGNOSTIC
Should maintenance be required, the unit’s
self-diagnostic system will display a
maintenance code, which makes
troubleshooting quick, accurate and
less expensive.
EZ-LINK™ CABLE
EZ-Link cable connects two tankless units
to operate as one – now available for high
demand applications.
RHEEM QUALITY
We are committed to providing the highest
quality product to customers. The Rheem
Tankless is no exception. The specially
designed features have been field and
laboratory tested to ensure consistent, precise
operation to meet our quality standards.
• Use as an energy-efficient water heater. Use larger models
for multiple use applications, smaller models for single use
applications.
• Perfect for handling the hot water demands of today’s
busy families and luxury bathrooms.
• Heat water for a vacation home without the inconvenience
of emptying and refilling a tank-style water heater each
season.
• Provides an ideal solution when
space is an issue.
the perfect solution
for a wide variety of water heating needs
These innovative, new tankless gas water heaters provide
a continuous supply of hot water from an energy-efficient and
space-saving design – about the size of a medicine cabinet.
• New! Standard models feature 3"/5"
concentric vent system with integrated
condensate collector and Prestige
models vent with PVC and feature a
built in condensate neutralizer
• New! Next generation burner
technology
• UMC-117 remote control is included
and can be set from the out-of-the-box
120 degrees – up to a 140 degree
maximum (additional remote control thermostats
are available – sold separately)
• EZ-Link™ cable connects two tankless
units to operate as one – now available
for high demand applications
• Exclusive! Guardian™ overheat
film wrap (OFW)
• Exclusive! High-altitude capability
•
options – up to 9,840 ft. elevation
above sea level
Exclusive! All Rheem models can
be linked in up to 20 unit manifold
installations by using the optional
MIC-180 and MICS-180 manifold
control assembly
• New! Manifold up to 6 units with an
optional MIC-6 manifold control board
• All Rheem tankless models are
third-party efficiency certified
by GAMA
• Continuous hot water
• Energy saving design - Prestige
models feature a .94 EF
• Compact, space saving design
• Intelligent electronic controls designed
to increase energy efficiency and safety
• Self diagnostic program
• Digital display shows temperature
setting and maintenance codes
Whole-Home Systems
• All models meet ENERGY
STAR® requirements
• Built-in electric blower
• Indoor models supplied with a
120 volt power cord
• Environmentally friendly Low NOx
burner meets SCAQMD rule 1146
requirements
• Installation vent kits available –
sold separately
• All models feature freeze protection
Renovations, Additions and
Vacation Homes
to -30° F
Limited Warranty
12-Year on heat exchanger,
5-Year on parts, 1-Year on labor*
* See Residential Warranty Certificate for complete
warranty information.
Certifications and Ratings
These units are designed to meet or exceed ANSI
(American National Standards Institute) requirements
and have been tested according to D.O.E. test
procedures and meet or exceed the energy efficiency
requirements of NAECA, ASHRAE standard 90, ICC
Code and all state energy efficiency performance
criteria for energy consuming appliances.
Luxury Bathrooms
The Rheem Tankless
makes quick work of all these
applications with one
convenient, reliable unit that
will fit almost anywhere
indoors, or if space is tight,
ask about our outdoor models.
Specifications
DESCRIPTION
MODEL
NUMBER
FEATURES
GAS
INPUT
BTU/HR.
TYPE
TEMP.
RANGE
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
WATER FLOW RATE
GPM @ 77° GPM @ 45° GPM @ 35° CONNECTION
RISE MAX. RISE MAX. RISE MAX. WATER GAS
HEIGHT
WIDTH
DEPTH
ENERGY INFO.
VENT
DIAMETER
(INCHES)
SHIP.
WEIGHT
(LBS.)
ENERGY
FACTOR
D.O.E. ANN.
OP. COST
NAT/LP
3 by 5
54
.82
$223/$374
N/A
54
.82
$223/$374
3 by 5
54
.82
$223/$374
N/A
54
.82
$223/$374
3 by 5
54
.82
$223/$374
N/A
54
.82
$223/$374
82
.94
$194/$326
82
.94
$194/$326
RHEEM TANKLESS WATER HEATERS FOR 1-2 BATHROOM HOMES
RTG-64DVN
11,000 150,000
RTG-64XN
11,000 150,000
Indoor
Direct Vent
Outdoor
100° to
140° F
3.3
5.6
6.4
3/4
3/4
25-5/8
13-7/8
9-7/8
100° to
140° F
3.3
5.6
6.4
3/4
3/4
23-5/8
13-7/8
8-7/8
CONCENTRIC
RHEEM TANKLESS WATER HEATERS FOR 2-3 BATHROOM HOMES
RTG-84DVN
11,000180,000
RTG-84XN
11,000180,000
Indoor
Direct Vent
Outdoor
85° to
140° F
3.9
6.7
8.4
3/4
3/4
25-5/8
13-7/8
9-7/8
85° to
140° F
3.9
6.7
8.4
3/4
3/4
23-5/8
13-7/8
8-7/8
CONCENTRIC
RHEEM TANKLESS WATER HEATERS FOR 3 BATHROOM HOMES
RTG-95DVN
11,000 199,900
RTG-95XN
11,000 199,900
Indoor
Direct Vent
Outdoor
85° to
140° F
4.3
7.4
9.5
3/4
3/4
25-5/8
13-7/8 9-7/8
85° to
140° F
4.3
7.4
9.5
3/4
3/4
23-5/8
13-7/8 8-7/8
CONCENTRIC
NEW! RHEEM PRESTIGE CONDENSING TANKLESS WATER HEATERS FOR 3 BATHROOM HOMES
RTGH-95DVN
11,000 199,900
RTGH-95XN
11,000 199,900
Indoor
Direct Vent
Outdoor
85° to
140° F
4.9
8.4
9.5
3/4
3/4
27-1/2
18-1/2 9-3/4
3" PVC
85° to
140° F
4.9
8.4
9.5
3/4
3/4
27-1/2
18-1/2 9-3/4
N/A
2-PIPE
All models are available in Natural Gas and Propane (LP). For Propane replace the N with P when ordering.
• Factory set temperature is 120° F for all models. See Use and Care Manual for setting.
• For installations above 3,280 feet, adjustment is required. Refer to Rheem price list or consult factory for details.
• Consult factory for information on sizing the application.
Installation Vent Kits available, sold separately.
Maximum Hot Water Flow Rate and Temperature Rise
Model Number
35°
45°
50°
60°
70°
77°
80°
90°
100°
RTG-64 Water Flow (GPM)
6.4
5.6
5.1
4.2
3.6
3.3
3.2
2.8
2.5
RTG-84 Water Flow (GPM)
8.4
6.7
6.1
5.1
4.3
3.9
3.8
3.4
3.0
RTG-95 Water Flow (GPM)
9.5
7.4
6.6
5.5
4.7
4.3
4.1
3.7
3.3
RTGH-95 Water Flow (GPM)
9.5
8.4
7.6
6.3
5.4
4.9
4.7
4.2
3.8
Above estimates are for sizing purposes only.
Venting Options and Installations
All indoor tankless units must be vented
vertically or horizontally to the outdoors
using manufacturer approved stainless
steel venting material (No other venting
material is permitted). All indoor models
require stainless steel venting material.
Venting details, including clearances and
diagrams can be found in the “Use &
Care Manual” of Rheem indoor tankless
water heaters.
More Rheem water heaters have been installed
in homes than any other brand. Rheem has been
providing reliable water heating to the world since
we invented the water heater over 100 years ago.
Premier Customer Experience
Priority One!
Rheem Water Heating will be the premier customer
experience provider of Rheem tankless water heaters.
Rheem’s philosophy of speed, accuracy and
attentiveness will guide this initiative. This will be
achieved through customer education, internal and
external training, and after sales service.
For more information,
call 1-866-720-2076
or visit rheem.com
In keeping with its policy of continuous progress and product improvement,
Rheem reserves the right to make changes without notice.
Tankless water heaters
Continuous hot water
Rheem Water Heating and Heating & Cooling Products
101 Bell Road • Montgomery, AL 36117-4305
1-866-720-2076 • www.rheem.com
Rheem Canada Ltd./Ltée • Water Heater Division
125 Edgeware Road, Unit 1, Brampton, Ontario L6Y 0P5
Printed in U.S.A.
10/10 WP
101-66-10 Rev. 1
SPECIFICATION SHEET
QTR / QTRE SErIes Fan / LIGHT / NIGHT LIGHTS
models QTR080L, QTR110L,
QTRE080FLt, QTRE110FLt
Ultra-quiet, high performance bath fan / light
with a modern-styled grille.
FEATURES
qtr080l
qtr110l
qtrE080FlT
qtrE110FlT
TYPICAL SPECIFICATION
Ceiling Ventilator shall be Broan Model QTR080L (QTR110L)
(QTRE080FLT) (QTRE110FLT).
Ceiling Ventilator shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be ducted to a
roof or wall cap using 4” round ductwork.
Blower assembly shall be removable, have a centrifugal-type blower
wheel and a permanently lubricated motor designed for continuous
operation.
Non-metallic damper/duct connector shall be included.
Lamp shall be 42W fluorescent * (Models QTRE080FLT &
QTRE110FLT only) or 100W incandescent (Models QTR080L &
QTR110L only) with separate 4W night light.
Air delivery shall be no less than 80 (110) CFM and sound level no
greater than 0.8 (1.0) (1.3) (1.5) Sones. All air and sound ratings
shall be certified by HVI.
Ceiling ventilator shall be Energy Star® qualified and have an energy
efficient permanent split capacitor motor (Models QTRE080FLT &
QTRE110FLT only).
Ceiling Ventilator shall be U.L. Listed for use in insulated ceilings
(Type I.C.) and for use over bathtubs and showers when connected
to a GFCI protected branch circuit.
BLOWER:
• Plug-in, permanently lubricated motor - engineered for continuous operation
• Dynamically balanced centrifugal blower wheel for quiet, efficient performance
• Low RPM for quiet operation
• Resilient anti-vibration motor mounts (QTR080L and QTR110L only)
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” duct connector with tapered sleeve and no metallic clatter
• 7-5/8” height allows for 2” x 8” (nominal) joist installations
• Sturdy, easy, four-point mounting directly to joist
• Includes unique spacer (patent pending) for mounting to engineered “I” joists
• Includes hanger bars to position housing anywhere between 16” to 24”-on-center
joists (Models QTRE080FLT & QTRE110FLT only)
• Two sets of mounting holes for hanger bars allow flush installation with bottom or
top of drywall (Models QTRE080FLT & QTRE110FLT only)
• Can be mounted in ceilings up to 12/12 pitch (Models QTRE080FLT &
QTRE110FLT only) or 7/12 pitch (Models QTR080L & QTR110L only)
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with designers and
consumers
• 42W fluorescent lamp* (Models QTRE080FLT & QTRE110FLT only) (bulb
included)
• 100W incandescent lamp (Models QTR080L & QTR110L only) (bulb not
included)
• 4W night light (all models) (bulb not included)
• Durable steel reflector with white enamel finish
BUILDER PACKS:
Models
• Rough-in housing required - order Broan Model QTXR000HL (4 housings per
QTRE080FLT &
carton)
QTRE110FLT
- Includes hanger bars to position housing anywhere between 16” to 24”-on-
only.
center joists (4 sets of hangers per carton)
- Two sets of mounting holes for hanger bars allow flush installation with bottom or top of drywall
* Use only one of the following 42W fluorescent lamps:
CONTROLS (Purchase separately):
• Refer to Broan’s catalog for a complete line of accessories to
G.E.
F42TBX/835/A/ECO or F42TBX/830/A/ECO or F42TBX/827/A/ECO
effectively adapt these fans to your construction requirements
PHILIPS
PL-T 42W/35/4P/ALTO or PL-T 42W/30/4P/ALTO or PL-T 42W/27/4P/ALTO
U.L. Listed for use over bathtubs and showers when connected to a
SYLVANIA
CF42DT/E/IN/835 or CF42DT/E/IN/830 or CF42DT/E/IN/827
GFCI protected branch circuit (ceiling mount only).
NEMA Type
CFTR42W/GX24q/835 or CFTR42W/GX24q/830 or CFTR42W/GX24q/827
U.L. Listed for use in insulated ceilings (TYPE I.C.)
Broan
99271358
California Title 24 compliant (Models QTRE080FLT & QTRE110FLT only)
3-Year Warranty
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
90D
99043783F
PERFORMANCE RATINGS
AIR FLOW PERFORMANCE
QTR / QTRE SERIES FAN /
LIGHT / NIGHT LIGHTS
HVI-2100 certified ratings comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are available to
consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in
AMCA’s state-of-the-art test laboratory. Sones
are a measure of humanly-perceived loudness,
based on laboratory measurements.
AMPS
Model
QTR080L
QTR110L
QTRE080FLT
QTRE110FLT
WEIGHT
Amps*
1.6
1.8
0.9
1.0
*Total connected load
Model
Shipping
Weight
QTR080L
13.8 lbs.
QTR110L
13.8 lbs.
QTRE080FLT 14.2 lbs.
QTRE110FLT 14.8 lbs.
Ps (in. w.g.)
CFM
@0.1” Ps
80
110
80
110
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
10
20
30
40
50
60
Airflow (cfm)
70
80
90
100
MODEL QTR110L
0.9
0.8
0.7
Ps (in. w.g.)
Sones
@0.1” Ps
1.0
1.5
0.8
1.3
0.8
0.7
HVI PERFORMANCE
Model
QTR080L
QTR110L
QTRE080FLT
QTRE110FLT
MODEL QTR080L
0.9
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
10
20
30
40
50
60
70
Airflow (cfm)
80
90
100
110
120
90
100
MODEL QTRE080FLT
0.5
Ps (in. w .g.)
0.4
Models QTRE080FLT &
QTRE110FLT only.
0.3
0.2
0.1
0.0
0
10
20
30
40
50
60
Airflow (cfm )
70
80
MODEL QTRE110FLT
0.7
0.6
Ps (in. w .g.)
0.5
0.4
0.3
0.2
qtr080l
qtr110l
qtrE080Fl
qtrE110Fl
0.1
0.0
0
10
20
30
40
50 60 70 80
Airflow (cfm )
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
90 100 110 120
Shop Secure Home 180-Degree Motion Sensing Security Light with Bulb Shields - White... Page 1 of 1
Lowe's Customer Care
1.800.445.6937
Hours of Operation:
Mon - Sat 7am - 11pm EST | Sun: 10am - 7pm
EST
Secure Home 180-Degree Motion
Sensing Security Light with Bulb
Shields - White
Get Pricing & Availability
Submit
Item #: 182199 | Model #:SH-5412-WH-A
Find a store near you for great
selections at neighborhood
prices.
Related Products
Not Yet Rated
Description
Specifications
Not Yet Rated
Description
180-Degree Motion Sensing Security Light with Bulb Shields - White
•
•
•
•
Up to 70 ft. Detection Range with Adjustable Detection Sensitivity
Powder Coated Finish for Weather Resistance
Selectable Light Timer (TEST, 1 min, 5 min or 20 min)
Uses 2 - 120W Maz PAR38 Flood Bulbs - (Not Included)
Not Yet Rated
Specifications
Application
Number of Lights
Motion
Activated
Voltage (Volts)
Timer Included
Yes
1.0
Color
White
Maximum Bulb Wattage (Watts)
120.0
Motion Sensor
Yes
Height (Inches)
13.0
Width (Inches)
17.0
Length (Inches)
8.5
Weight (lbs.)
2.4
Solar Powered
No
120.0
UL Safety Listing
Yes
CSA Safety Listing
Yes
ETL Safety Listing
No
http://www.lowes.com/pd_182199-85538-SH-5412-WH-A_4294773317_4294937087_?pr... 8/11/2011
Incandescent
Close-to-Ceiling
Type
-04
P3408
-09
-10 -13 -20
-30 -33
Catalog
No.
Finish
Platinum Brushed Polished Brushed
Mist
Nickel
Brass
Steel
Lamping
Dimensions (Inches)
A
B
P3408
-04
1 (m) 60w
7-1/2
Catalog
No.
Antique
Bronze White
Cobblestone
Lamping
Dimensions (Inches)
A
B
P3408
-20
-33
1 (m) 60w
7-1/2
-09
-10
-30
-13
4-3/8
4-3/8
B
A
Specifications:
General
Electrical
• White glass
• Pre-wired
• (3) installed fitter screws to retain glass
• Requires 90 degree supply wire
connections
• Brushed Nickel (-09), polished brass (10), brushed steel (-13), and antique
bronze (-20) are plated finishes
• Platinum mist (-04), white (-30), and
cobblestone (-33) are painted
• Medium based ceramic sockets, installed
Labeling
• UL-CUL Dry Location listed
• Steel construction
Mounting
• Ceiling mount
• Ceiling pan covers a standard 4”
recessed hexagonal outlet box
• Mounting strap for outlet box included
• Keyhole slots for easy mounting
Progress Lighting
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
Rev. 9/09
Incandescent
White Glass
Quartersphere
Sconces
Type
-30
P7112
Finish
■
Dimensions (Inches)
Catalog No.
White
Lamping
A
B
C
D
P7112
-30
1 (m) 100w
11-1/2
5
5-3/4
2-3/8
C
D
B
A
Specifications:
General
• White glass quartersphere complete
sconce
• White (-30) trim
• Direct-Indirect illumination
Mounting
• Horizontal wall mount
• Full sized backplate covers outlet box
• Mounting strap included for mounting to
outlet box
Progress Lighting
Post Office Box 5704
Spartanburg, South Carolina
29304-5704
www.progresslighting.com
Electrical
• Ceramic medium base socket
• Pre-wired
Labeling
• UL-CUL listed
Rev. 8/06
Shop Utilitech 48" 4-Light Utility Fluorescent Wrap Light at Lowes.com
Page 1 of 1
Lowe's Customer Care
1.800.445.6937
Hours of Operation:
Mon - Sat 7am - 11pm EST | Sun: 10am - 7pm
EST
Utilitech 48" 4-Light Utility
Fluorescent Wrap Light
Get Pricing & Availability
Submit
Item #: 184346 | Model #:184346
Find a store near you for great
selections at neighborhood
prices.
Related Products
Not Yet Rated
Description
Specifications
Not Yet Rated
Description
48" 4-Light Utility Fluorescent Wrap Light
•
•
•
•
Die-formed, rigid, pre-finished, white steel housing
Clear prismatic diffuser with linear prisms
Energy saving electronic ballast
"Energy Star" save money on your energy bill
Not Yet Rated
Specifications
Utility Fluorescent Type
Wraps
Energy Efficiency
T8
Ballast required
Yes
Length (Inches)
48.0
Number of Bulbs
4.0
UL Safety Listing
Yes
Width (Inches)
13.0
CSA Safety Listing
Yes
Height (Inches)
4.0
ETL Safety Listing
Yes
http://www.lowes.com/pd_184346-13537-184346_?PL=1&productId=1225811
8/11/2011
PRODUCT SPECIFICATIONS
Manual-ON Occupancy Sensor
Leviton’s Cat No. IPP15-1L Decora® Manual-ON Occupancy Sensor
acts like a standard wall switch and complies with the California
Title 24 Residential Lighting Standards for 2005. It has the added
energy savings benefit that if you forget to turn the lights OFF, the
lights will turn OFF automatically if motion is not detected within
the coverage area. The Manual-ON Occupancy Sensor can be used
in a variety of residential applications including:
Bathrooms
Garages
Hallways
Basements
Utility/Laundry Rooms
Living/Family Rooms
Bedrooms
Dining Rooms
Kitchens
The unit installs in place of a single pole or 3-way wall switch
and fits in a standard wallbox. The unit can be used for switching
incandescent, fluorescent and electronic or magnetic low voltage
lighting with ballasts.
GENERAL OPERATION
The IPP15-1L uses passive infrared (PIR) detection technology to
monitor a room for occupancy through a segmented Fresnel lens.
This specialized lens divides the field of view into sensor zones.
After the switch is manually turned ON, when a person passes into
a sensor zone, the sensor detects motion and keeps the lights ON.
The lights will remain ON as long as there is an occupant moving
through the sensor zones.
A delayed-OFF time adjustment prevents the lights from switching
OFF when the space is occupied. In order to keep the lights ON, a
person must pass through a sensor zone at least once during the
selected delayed-OFF time interval. An LED indicator blinks each
time the unit detects activity in the sensor zone. When the sensor’s
monitored space is unoccupied for the delayed-OFF interval, the
unit will switch the lights OFF. If motion is detected within 30
seconds after the lights have turned OFF, the lights will turn back
ON. If no motion is detected within 30 seconds, the lights will
remain OFF and must be turned back ON manually.
To ensure longer service life and compatibility with electronic
ballasts, the device carefully times its switching contact opening
and closing with the zero crossing point of the AC power curve.
This minimizes contact wear caused by in-rush currents from
electronic ballasts.
IPP15-1L
MANUAL-ON OPERATION
The unit will not turn lights ON automatically when
motion is detected. Lights can only be turned ON by
manually pressing the push-button. The lights will
remain ON as long as the unit detects activity in the
sensor zones.
AUTO/MANUAL-OFF OPERATION
The IPP15-1L will turn the lights OFF automatically
after the space becomes vacant and the delayedOFF time expires. Lights also can be turned OFF
manually at any time by pressing the push-button.
Leviton Mfg. Co., Inc.
201 North Service Road, Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Decora® Manual-ON Occupancy Sensor IPP15-1L
APPLICATIONS
Field of View
The IPP15-1L and IPP0R provide a 180° field of view with a
maximum coverage area of approximately 900 square feet.
The maximum sensing distance in front of the sensor is 30
feet and at each side is 15 feet. A “minor-motion” zone detects
relatively small body movements and allows the lights to stay
ON even though a person may not be moving or walking
around the room. The remainder of the field of view, the
“major-motion” zone, exhibits a lesser degree of sensitivity
and requires larger movements.
30 ft. (9.1m)
30 ft. (9.1m)
TOP VIEW
Sensor Unit
4 ft.
(1.2 m)
Decora® Manual-ON Occupancy Sensor IPP15-1L
Multi-Location Control
The IPP15 has true 3-way and multi-location control
capabilities. When used with the IPP0R, Matching Sensor
Remote, these devices are ideal for conveniently controlling
lighting with 2 or more entrances or in large or L-shaped
rooms where detection capabilities with a single sensor is
typically inadequate. The IPP15 can also be used with the
Vizia +® Switch Remote, VP0SR, where a single sensor provides
adequate detection coverage. And the IPP0R, Matching
Sensor Remote, can also be paired with any Vizia + dimmer
to afford the combined benefits of energy efficiency and
lighting control comfort.
30 ft. (9.1m)
SIDE VIEW
FEATURES AND BENEFITS
■ Manual-ON/Automatic-OFF operation in accordance with
California Title 24 2005 requirements
■ Low-profile design eliminates an obtrusive “scanning-
device” look. Elegant Decora styling complements any
interior and coordinates with Leviton’s popular line of
Decora wiring devices
■ IPP15 provides a true 3-way feature when used with the
IPP0R, Manual-ON Occupancy Sensor Remote or the VP0SR,
Vizia + Switch Remote
■ 180° field-of-view provides approximately 900 square feet
of coverage suitable for bathrooms, basements, garages,
utility rooms, and a variety of other residential areas
■ Convenient push-button provides Manual ON/OFF light
switching at any time
■ Segmented Fresnel lens provides optimum sensitivity and
performance. It is designed with an extensive “minor motion”
area where even slight body movements will be detected
■ Horizontal field of view may be adjusted between 180° and
32° of arc by using integral blinders located on either side
of the lens
■ Four optional manual adjustments for delayed-OFF time
settings maximize energy savings: 30 seconds (for walk test),
5 minutes, 15 minutes and 30 minutes
■ LED indicator light flashes when sensor detects motion
to verify detection is active
■ Unit can be used for 120V lighting. Compatible with both
electronic and magnetic ballasts
■ Relay switches at the zero crossing point of the AC power
curve to ensure maximum contact life and compatibility
with electronic ballasts
■ Fits in standard wallbox. Gangable with other units
■ Requires a neutral (white) wire connection
SPECIFICATIONS
The device listed herein shall be a Decora® Manual-ON
Occupancy Sensor, capable of detecting infrared
emissions from human presence and responding by
keeping incandescent, low-voltage, and fluorescent
lighting loads ON. If this unit does not detect movement
after a preset period of time, it will respond by switching its
assigned load OFF. The unit shall switch at the zero crossing
point of the AC power curve to ensure maximum relay
contact life and compatibility with electronic ballasts.
The Manual-ON Occupancy Sensor shall be equipped with
a push-button to provide Manual ON/OFF switching in
accordance with California Title 24 requirements. The Sensor
shall feature adjustable delayed-OFF time as well as provide
sensitivity adjustment and integral sliding blinders to customize
the horizontal field of view. The unit shall be capable of
providing optional Manual-ON/Automatic-OFF operation. If
motion is detected within 30 seconds after the load has been
turned OFF due to the absence of motion, the lights will turn
back ON. If 30 seconds expires, the lights (load) must be turned
ON manually. The unit shall be capable of controlling the load in
single pole, 3-way or more applications.
Leviton Mfg. Co., Inc.
201 North Service Road, Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
TYPICAL SPECIFICATIONS
■ Operating Temperature Range: 0°C to 50°C
■ Storage Temperature Range: -10°C to 85°C
■ Relative Humidity: 20% to 90% non-condensing
■ Terminations: Line–Black, Load–Red, Neutral–White,
Traveler–Yellow, Ground–Green
DIMENSIONAL DRAWINGS
1.75 (44.4)
USER INTERFACE
1.46 (35.6)
0.50 (1.26)
1.30 (33.0)
FACE PLATE
TO STRAP
BACK COVER
TO STRAP
1.75 (44.9)
Mounting Yoke
Control Panel,
Cover Removed
IPP15-1L/IPP0R
3.81 (96.8)
3.28 (83.3)
4.13 (104.9)
2.71 (68.8)
4.061 (103.2)
2.61 (66.3)
BLINDERS
1
2
4
7
10
3
TIME
RANGE
Led Window
Push Button
VP0SR
AGENCY STANDARDS AND COMPLIANCE
PROGRAMMING
■
The IPP15-1L and IPP0R will deliver optimum performance in a
wide variety of residential applications. There are adjustment
options for sensitivity, delayed-OFF time, and field-of-view.
These adjustment options will customize the performance to
meet the needs of a specific installation. To avoid tampering,
all adjustments must be accessed by removing the control
panel cover beneath the wallplate. A small flat-head screwdriver can be used to adjust the control knobs. The field-ofview blinders are finger-tip operated. Controls are labeled
as follows:
UL Listed (File #E-118904)
■ CSA Certified (File #LR-91148M)
■ California Title 24 2005 Energy Code Compliant
INSTALLATION CONSIDERATIONS
The IPP15 can be used as a single pole device or in a 3-way
application with an IPP0R, Matching Sensor Remote or a VP0SR,
Vizia + Switch Remote. These devices require a neutral white
wire and mount in a standard wallbox. The unit’s integral
blinders may be used to restrict the field of view to prevent
unwanted detection of hallway traffic. Occupancy Sensors
should be positioned at least 6 feet away from HVAC registers.
Obstructions such as furniture, windows, glass shower doors,
etc., may prevent the sensor from detecting motion.
Note: When the unit is powered up, it will take approximately
one minute to begin normal operation.
WARRANTY INFORMATION
Five-year limited warranty
Blinders
Integral sliding blinders on each side of the lens may be used
to restrict the 180° field of view down to 32°. This will prevent
unwanted detection in areas such as hallways.
Time
The delayed-OFF default time is preset at 30 minutes.
A choice of four delayed-OFF time settings is available:
30-seconds (for walk test purposes only), 5 minutes,
15 minutes, and 30 minutes.
Range
The range can be adjusted from 100% to 36% of the total
coverage area. This allows the unit to ignore motion at
the far end of its range and avoid keeping the lights ON
unnecessarily.
Leviton Mfg. Co., Inc.
201 North Service Road, Melville, NY 11747 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538 www.leviton.com
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Decora® Manual-ON Occupancy Sensor IPP15-1L
Lens
WIRING DIAGRAMS
Diagram #1
Single Pole
Diagram #2
3-Way with Sensor Remote
or Vizia + Matching Switch Remote
IPP15
WH
IPP0R/VP0SR-1L Remote*
Hot (Black)
BK
Hot (Black)
Black
WH
WH
BK
Green
Ground
RD
IPP15
Line
120VAC, 60Hz
Load
BK
Green
Ground
YL/RD (unused)
Black
Green
Ground
RD
YL/RD
Line
120VAC, 60Hz
YL/RD
Load
White
Decora® Manual-ON Occupancy Sensor IPP15-1L
White
Neutral (White)
Neutral (White)
* Sensor remote depicted in diagram
Diagram #3
3-Way with Vizia + Coordinating
Switch Remote
VP0SR-10 Remote
WH
IPP15
BK
(unused)
IPP0R Remote VP0SR-1L Remote
Hot (Black)
WH
BK
RD
(unused)
Hot (Black)
WH
Green
Ground
Green
Ground
Black
Load
Diagram #4
Multi-Location Control
YL/RD
YL/RD
RD
BK
WH
BK
Green
Ground
Green
Ground
YL/RD
YL/RD
IPP15
WH
BK
Green
Ground
Black
Line
120VAC, 60H z
Line
120VAC, 60Hz
RD
YL/RD
LOAD
White
White
Neutral (White)
Neutral (White)
ORDERING INFORMATION
CAT. NO.
DESCRIPTION
RATING
COLOR
IPP15-1L*
Decora Manual-ON Occupancy Sensor for Single Pole,
3-Way or More Applications, 180° Field of View,
900 sq. ft., Neutral Required.
15A-120VAC
W, I, T, E
IPP0R-1L
Decora Manual-ON Occupancy Sensor Remote Unit
for 3-Way or More Applications, 180° Field of View,
900 sq. ft., Neutral Required.
No Load Rating – 120 VAC
W, I, T
VP0SR-1L
Vizia + Matching Switch Remote for 3-Way or up to
5 Locations, with LED Locator, Neutral Required.
No Load Rating – 120 VAC
Z
VP0SR-10
Vizia + Coordinating Switch Remote for 3-Way or up
to 5 Locations, with LED Locator, Neutral Required.
VP0SR-10 No Load Rating – 120 VAC
Z
To order colors, add suffix to basic Cat. No.: White (-W), Ivory (-I), Light Almond (-T), Black (-E).
Some products come packaged with 3 colors. Products with suffix (-Z) include White, Ivory and Light Almond.
* NAFTA Compliant models available. For more information visit www.leviton.com/nafta
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
IZaZe]dcZ/&"-%%"('("-.'%™;Vm/&"-%%"-('".*(-™IZX]A^cZ/-/(%6B",/%%EB:#I#BdcYVn";g^YVn/&"-%%"-')"(%%*
Leviton Manufacturing of Canada, Ltd.
&+*=nbjh7djaZkVgY!Ed^ciZ8aV^gZ!FjZWZX=.G&:.™IZaZe]dcZ/&"-%%")+.",-.%™;Vm/&"-%%"*+("&-*(
Leviton S. de R.L. de C.V.
AV\dIVcV)(!BZm^Xd9;!BZm^Xd8E&&'.%™IZa# *'**"*%-'"&%)%™;Vm# *'*(-+"&,.,™lll#aZk^idc#Xdb#bm
Decora and Vizia + are registered trademarks of Leviton Manufacturing Co., Inc.
Visit our website at www.leviton.com
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-8158A/D11-dp
Page 1 of 2
Frigidaire 30" Electric Cooktop
Model: FFEC3024LB
30-3/4" W x 3" H x 21-3/8" D
MSRP $599.00
Black
Specifications
Product Code: FFEC3024LB
Product Type: Cooktop
Power Type: Electric
Size: 30"
Installation Type: Drop-In
UPC Code: 0-57112-99021-7
Color: Black
Certifications & Approvals
Agency Approval: UL/CSA
Cooking Controls
Console Location: Right Side
Cooktop Specifications
Cooking Surface: Black Ceramic Glass
Right Front: 9" - 2,500 Watts
Right Rear: 6" - 1,200 Watts
Left Front: 6" - 1,200 Watts
Left Rear: 9" - 2,500 Watts
Knob Type: Plastic
Hot-Surface Indicator Light: Yes
Exterior Dimensions
Height: 3"
Width: 30-3/4"
Depth: 21-3/8"
Electrical Specifications
Power Supply Connection Location: Right Rear
Voltage Rating: 240V / 208V, 60Hz
http://www.frigidaire.com/productprint?productid=5736
8/11/2011
Page 2 of 2
Connected Load (kW Rating) @ 240V: 7.4 / 5.6
Amps @ 240 Volts: 30.8 / 26.9
Minimum Circuit Required (Amps): 30A
Installation
Approved for Single Oven Combo Installation: Yes
General Specifications
Product Weight (lbs): 40
Shipping Weight (lbs): 45
Cut-Out Dimensions
Cut-Out Height: 5"
Cut-Out Width: 29-5/8" - 29-7/8"
Cut-Out Depth: 20-1/4" - 20-1/2"
Features
Ready-Select® Controls
Select options or control cooking temperature with our
easy to use controls.
Color-Coordinated Control Knobs
White, Black and Bisque cooktops come with matching
knobs — while Stainless Steel models feature our
neutral black knobs.
Hot Surface Indicator
Alerts you when your cooktop may be too warm to
touch.
“On” Indicator
Alerts you when your cooktop is on.
http://www.frigidaire.com/productprint?productid=5736
8/11/2011
RHEEM SOLAR WATER HEATING SYSTEMS
SOLAR SOLUTIONS
High Efficiency, Low Energy Costs
from Rheem
Solar water heaters
from Rheem
SOLPAK™ ACTIVE SOLAR WATER HEATING PACKAGE SYSTEM
Available in 80 and 119 Gallon Capacities
6-Year Limited Tank Warranty* 10-Year Limited Collector Warranty**
2-Year Limited Pump and Control Warranty**
The System
• Closed loop glycol design
• Single and double collector systems
• Included: Solaraide™ HE tank, collectors,
controller, adjustable pump, mixing valve,
glycol solution, thermal expansion tank
(for glycol loop)
• Sold separately: 18 AGW sensor wire,
tilt mount kits(consult factory for
mounting options)
• OG-300 Certification by SRCC (Pending
on RS80-40BP model)
The Heat Exchanger Tank
• All models have at least 40 gallons of
hot water storage at all times
• Double wall heat exchanger – copper
tubing wrap-around design
• Single element backup heating source
• 3/4" Water and collector loop connections
The Collectors
• Flat plate design
• Black paint absorber coating
• OG-100 certified by SRCC
*See Residential Warranty Certificate for complete information.
**See SolPak Warranty Certificate for complete system information.
SYSTEM INFORMATION
STORAGE
CAPACITY
(US GAL)
SYSTEM
MODEL
NUMBER
OG-300
Certified
by SRCC
COLLECTOR INFORMATION
SOLAR
ENERGY
FACTOR*
NUMBER OF
COLLECTOR
PANELS
ABSORBER
COATING
WIDTH
(INCHES)
LENGTH
(INCHES)
DEPTH
(INCHES)
AREA
SQ. FT.
(GROSS)
DRY
WEIGHT
(LBS)
WATER HEATER INFORMATION
FLUID
CAPACITY
(US GAL)
DESIGN
FLOW RATE
(GPM)
MAX
FLOW RATE
(GPM)
MAX.
OPERATING
PRESSURE
HEIGHT
(INCHES)
DIAMETER
(INCHES)
APPROX.
WEIGHT
(LBS)
ELEMENT
WATTAGE
80
RS80-40BP
2.4
1
Black Paint 48-1/8 122-1/4
3-1/4
40.81
141
1.2
1.04
12
160
58-3/4
24-1/2
222
4500 W
80
RS80-48BP
2.6
2
Black Paint 36-1/8
98-1/4
3-1/4
24.61
80
.78
0.62
12
160
58-3/4
24-1/2
222
4500 W
119
RS120-64BP
3.2
2
Black Paint 48-1/8
98-1/4
3-1/4
32.79
106
1.0
0.83
12
160
62
28-1/4
380
4500 W
*As rated by the Solar Rating & Certification Corporation (SRCC)
1
2
3
4
5
Heat Exchanger Tank
Collectors
Controller
Multi-Speed Pump
2
Thermal Expansion Tank
Cool
Propylene
Glycol
3
4
5
Potable
Water
Supply
Hot Propylene
Glycol
1
Backup Heater
(Not included)
Heated Potable
Water
SOLPAK™ ACTIVE SOLAR WATER HEATING SYSTEMS FEATURING A GAS ASSIST HEAT EXCHANGE TANK
Available in 75 Gallon Capacity
6-Year Limited Tank Warranty* 10-Year Limited Collector Warranty**
2-Year Limited Pump and Control Warranty**
The System – a Single Tank Solar Solution!
• Takes up less space
• Drop in replacement for current gas
water heating system
• Fast recovery for high demand situations
• Closed loop glycol design
• Included: HE tank, collectors, controller,
multi-speed pump, mixing valve, glycol solution, thermal expansion tank (for glycol loop)
• Sold separately: 18 AGW sensor wire, tilt
mount kits (consult factory for mounting
options)
• OG-300 Certification by SRCC (Pending)
The Heat Exchanger Tank
• FVIR compliant
• 75 Gallon capacity
• 75.1 BTU input per hour (natural gas)
• Double wall heat exchanger – copper tubing
wrap-around design
• Gas backup heating source
• 3/4" Water and collector loop connections
The Collectors
• 3' x 8' and 4' x 10'
• Flat plate design
• Black paint absorber coating
• OG-100 certified by SRCC
*See Residential Warranty Certificate for complete information.
**See SolPak Warranty Certificate for complete system information.
SYSTEM INFORMATION
COLLECTOR INFORMATION
STORAGE
CAPACITY
(US GAL)
SYSTEM
MODEL
NUMBER
SOLAR
ENERGY
FACTOR*
NUMBER OF
COLLECTOR
PANELS
WIDTH
(INCHES)
LENGTH
(INCHES)
DEPTH
(INCHES)
75
RSG75-48BP
–
75
RSG75-40BP
–
2
Black Paint 36-1/8
98-1/4
3-1/4
24.61
80
.78
0.62
12
150
60
26-1/4
340
75.1
1
Black Paint 40-1/8 122-1/4
3-1/4
40.81
141
1.20
1.04
12
160
60
26-1/4
340
75.1
ABSORBER
COATING
DRY
WEIGHT
(LBS)
WATER HEATER INFORMATION
AREA
SQ. FT.
(GROSS)
FLUID
CAPACITY
(US GAL)
DESIGN
FLOW RATE
(GPM)
MAX
FLOW RATE
(GPM)
MAX.
OPERATING
PRESSURE
HEIGHT
(INCHES)
DIAMETER
(INCHES)
APPROX.
WEIGHT
(LBS)
BTU
INPUT
*As rated by the Solar Rating & Certification Corporation (SRCC)
1
2
3
4
5
Gas Heat Exchanger Tank
Collectors
Controller
Multi-Speed Pump
2
Thermal Expansion Tank
Cool
Propylene
Glycol
3
4
Hot Propylene
Glycol
1
5
Potable
Water
Supply
Heated Potable
Water
SOLPAK™ OPEN LOOP ACTIVE SOLAR WATER HEATING PACKAGE SYSTEM
Available in 80 and 119 Gallon Capacities
6-Year Limited Tank Warranty* 10-Year Limited Collector Warranty**
2-Year Limited Pump and Control Warranty**
The System
• Open loop design
• Not suitable for freezing climates
• Single and double collector systems
• Included: Solaraide™ storage tank,
collectors, controller, multi-speed pump,
mixing valve, freeze protection value, air
release valve, check valve
• Sold separately: 18 AGW sensor wire,
tilt mount kits (consult factory for mounting
options)
• OG-300 Certification by SRCC (Pending)
The Universal Tank
• Flexibility to install in either a side or top
connection application
• Single element back-up heating source
• 3/4" water and collector loop connections
The Collectors
• Two sizes: 4' x 8' and 4' x 10'
• Flat plate design
• Black paint absorber coating
• OG-100 certified by SRCC
*See Residential Warranty Certificate for complete information.
**See SolPak Warranty Certificate for complete system information.
SYSTEM INFORMATION
COLLECTOR INFORMATION
STORAGE
CAPACITY
(US GAL)
SYSTEM
MODEL
NUMBER
SOLAR
ENERGY
FACTOR*
NUMBER OF
COLLECTOR
PANELS
80
RSO80-40BP
2.3
119
RSO120-64BP
1.8
ABSORBER
COATING
WATER HEATER INFORMATION
DEPTH
(INCHES)
AREA
SQ. FT.
(GROSS)
DRY
WEIGHT
(LBS)
FLUID
CAPACITY
(US GAL)
DESIGN
FLOW RATE
(GPM)
MAX
FLOW RATE
(GPM)
MAX.
OPERATING
PRESSURE
HEIGHT
(INCHES)
DIAMETER
(INCHES)
APPROX.
WEIGHT
(LBS)
ELEMENT
WATTAGE
WIDTH
(INCHES)
LENGTH
(INCHES)
1
Black Paint 48-1/8
98-1/4
3-1/4
40.81
150
1.2
1.04
25
160
58-3/4
24-1/2
192
4500 W
2
Black Paint 122-1/4 98-1/4
3-1/4
32.79
106
1.0
0.83
12
150
62
28-1/4
336
4500 W
*As rated by the Solar Rating & Certification Corporation (SRCC)
1
2
3
4
Solar Storage Tank
Collectors
Controller
Multi-Speed Pump
2
Cold Water
To Collector(s)
3
4
Hot Water
From Collector(s)
1
Backup Heater
(Not Included)
Potable
Water
Supply
Heated Potable
Water
SOLPAK™ ACTIVE SOLAR WATER HEATING SYSTEM FEATURING MARATHON® TANKS
Available in 85 and 105 Gallon Capacities
Lifetime Limited Tank Warranty* 10-Year Limited Collector Warranty**
5-Year Limited Tank Parts Warranty* 2-Year Pump Controller Warranty**
The System
• Closed loop glycol system
• Double collector systems
• Included: Marathon tank, collectors, pump
controller, mixing valve, glycol solution
(3 gallons), thermal expansion tank
(for glycol loop) and more
• Sold separately: 18 AGW sensor wire, tilt mounting kits (consult factory for mounting options)
The Pump Controller
• Combines a variable speed solar temperature
control, collector circulator, storage tank circulator
and heat exchanger in a single unit
• Digital display with energy monitoring
• Flexible, programmable inputs/outputs
The Collectors
• Two sizes: 3’x8’ and 4’x8’
• Flat plate design
• Black paint absorber coating
• OG-100 certified by SRCC
The Tank
• Strong, polybutene material built to last
as long as the solar system
• Unique, corrosion resistant design will
never rust
• Lightweight and easy to install
• Electrical element backup heating source
SYSTEM INFORMATION
*See Residential Warranty Certificate for complete information.
**See Solar Marathon Warranty Certificate for complete details.
COLLECTOR INFORMATION
STORAGE
CAPACITY
(US GAL)
SYSTEM
MODEL
NUMBER
SOLAR
ENERGY
FACTOR
85
RHSME85-48P
*
105
RHSME105-64P
*
NUMBER OF
COLLECTOR
PANELS
WATER HEATER INFORMATION**
WIDTH
(INCHES)
LENGTH
(INCHES)
DEPTH
(INCHES)
AREA
SQ. FT.
(GROSS)
2
Black Paint 36-1/8
98-1/4
3-1/4
24.61
80
.78
0.62
12
150
66-1/4
28-1/4
134
4500 W
2
Black Paint 48-1/8
98-1/4
3-1/4
32.79
106
1.0
0.83
12
150
66-3/4
30-1/4
152
4500 W
ABSORBER
COATING
DRY
WEIGHT
(LBS)
FLUID
CAPACITY
(US GAL)
DESIGN
FLOW RATE
(GPM)
MAX
FLOW RATE
(GPM)
MAX.
OPERATING
PRESSURE
HEIGHT
(INCHES)
DIAMETER
(INCHES)
APPROX.
WEIGHT
(LBS)
ELEMENT
WATTAGE
*As rated by the Solar Rating & Certification Corporation (SRCC)
1
2
3
Storage Tank
4
Thermal
Expansion
Tank
**240V AC
Collectors
Solar Control
System
2
4
1
Backup
Heater
(Not
included)
3
Potable
Water
Supply
Heated
Potable
Water
SOLARAIDE™ PASSIVE WATER HEATING SYSTEM
Available in 47 and 80 Gallon Storage Capacities
5-Year Limited Tank, Collector and Parts Warranty*
The System
• Passive design, requires no pumps or
controllers
• Available in two system configurations:
RS47-21BP, 47 gallon storage
capacity and RS80-42BP, 80 gallon
storage capacity
• Complete system includes tank,
collector(s), installation kit, and heat
transfer fluid
• Closed loop, indirect heat exchange
• OG-300 Certification by SRCC
47 Gallon system includes a single collector
panel for homes with 1-1/2 baths
The Tank
• Single wall external heat exchanger
completely surrounds storage tank
80 Gallon system includes two collector
panels for homes with 2 or 3 baths
DESCRIPTION
• Rugged steel tank with vitreous
enamel tank lining
• Immersion, copper sheath backup
element
The Collector
• Black polyester powdercoat collector
absorber coating
• 35 multi-flow risers for faster heat
transfer
• OG-100 certified by SRCC
• Flat plate design
*See Residential Warranty
Certificate for complete
information.
OG-300
Certified
by SRCC
ROUGHING IN DIMENSIONS
SYSTEM
(IN INCHES)
APPROX.
SYSTEM WEIGHT
STORAGE
CAPACITY
(US GAL)
SYSTEM
MODEL
NUMBER
SOLAR
ENERGY
FACTOR*
NUMBER OF
COLLECTOR
PANELS
WORKING
PRESSURE
(TANK)
DELIVERY
CAPACITY
(SOLAR)
BACKUP
ELEMENT
SPECIFICATIONS
LENGTH
WIDTH
EMPTY
FULL
47
RS47-21BP
1.3
1
145 PSI
42.3 GAL.
2.4kw, 240V
97-1/2
58-1/2
58.5 x 20.1 x 20.1
76.3 x 40.3 x 3.04
236 LBS.
641 LBS.
80
RS80-42BP
1.5
2
145 PSI
68 GAL.
2.4kw, 240V
97-1/2
91
90.9 x 20.1 x 20.1
76.3 x 40.3 x 3.04
402 LBS. 1,079 LBS.
TANK
(IN INCHES)
COLLECTOR
(IN INCHES)
*As rated by the Solar Rating & Certification Corporation (SRCC)
1
Thermosiphon
Heat Exchanger Tank
2
3
4
Collector
Thermal Expansion Tank
1
2
Existing or Backup
Water Heater
(Not Included)
Heated
Potable Water
3
4
Potable
Water
Supply
Heated Potable
Water
SOLAR COLLECTORS
Available in 3 Sizes
10-Year Limited Collector Warranty*
• OG-100 certified by SRCC
• Durable low iron tempered glass
• Integral mounting channel for easy installation
• Stainless steel fasteners
• Suitable for open and closed loop systems
• Copper absorber plate
• Can be mounted horizontally or vertically
* See Warranty Certificate for complete information.
MODEL
NUMBER
DRY
WEIGHT
(LBS.)
FLUID
CAPACITY
24.61
80
0.78
0.62
12
160
32.79
106
1
0.83
12
160
ABSORBER
COATING
WIDTH
(INCHES)
LENGTH
(INCHES)
DEPTH
(INCHES)
AREA
SQ. FT.
RS24-BP
Black Paint
36-1/8
98-1/4
3-1/4
RS32-BP
Black Paint
48-1/8
98-1/4
3-1/4
DESIGN
FLOW RATE
(GPM)
MAX
FLOW RATE
(GPM)
MAX
OPERATING
PRESSURE
RS40-BP
Black Paint
48-1/8
122-1/4
3-1/4
40.81
141
1.2
1.04
12
160
RS24-BC
Black Chrome
36-1/8
98-1/4
3-1/4
24.61
80
0.78
0.62
12
160
RS32-BC
Black Chrome
48-1/8
98-1/4
3-1/4
32.79
106
1
0.83
12
160
RS40-BC
Black Chrome
48-1/8
122-1/4
3-1/4
40.81
141
1.2
1.04
12
160
THERMAL PERFORMANCE RATINGS* BP SERIES
THERMAL PERFORMANCE RATINGS* BC SERIES
2
Btu / ft2 / Day
Btu / ft / Day
Category
(Ti-Ta)
Ti = inlet fluid temp.
Ta = ambient air temp.
CLEAR
DAY
2000
Btu / ft2 / Day
MILDLY CLOUDY
DAY
1500
Btu / ft2 / Day
CLOUDY
DAY
1000
Btu / ft2 / Day
Category
(Ti-Ta)
Ti = inlet fluid temp.
Ta = ambient air temp.
CLEAR
DAY
2000
Btu / ft2 / Day
MILDLY CLOUDY
DAY
1500
Btu / ft2 / Day
CLOUDY
DAY
1000
Btu / ft2 / Day
A(-9°F)
1,284
971
659
A(-9°F)
1,332
1,005
680
B(9°F)
1,169
854
542
B(9°F)
1,218
890
565
C(36°F)
984
677
372
C(36°F)
1,040
720
402
D(90°F)
619
343
89
D(90°F)
699
405
127
E(144°F)
280
62
–
E(144°F)
390
137
–
Thermal performance is obtained by multiplying the collector output for the appropriate application and insolation level by the total gross collector area.
*Collector ratings are derived from the Solar Rating & Certification Corp (SRCC) Document RM-1 and Standard OG-100.
Low Iron Tempered Glass
Low-Binder Fiberglass Insulation
Rigid Foam Insulation
Secondary Silicon Glazing Seal
Black Chrome or
Moderately Selective
Black Paint Absorber Coating
Copper Absorter Plate
Integral Mounting Channel
Aluminum Backsheet
Vent Plug
MORE RHEEM SOLAR WATER HEATING SOLUTIONS!
Storage Tanks
Solaraide™
Solaraide™ HE
Solar Indirect
Marathon® Thermal Storage Tanks
A Universal Storage
Tank and Electric
Storage Water
Heaters for Solar
Applications
Solar Heat Exchanger,
Solar Tank, or Electric
Storage Water Heater
Solar Storage Tank with
Single Wall Internal
Heat Exchanger and
Back-up Heating
Element
Specifically Designed for Solar Applications
Solaraide™ HE
Tank with
Gas Assist
For Use in Residential
Closed Loop Solar
Water Heating
Applications
Ask about using
tankless with our
Solar Solutions!
Interested?
For more information call
Cool
Propylene
Glycol
Hot Propylene
Glycol
800-621-5622
Backup
Tankless
Gas Heater
Email: solar@rheem.com
Visit: rheem.com
Potable
Water
Supply
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Solar water heaters
from Rheem
Rheem Water Heating and Heating & Cooling Products
101 Bell Road • Montgomery, AL 36117-4305
800-621-5622 • www.rheem.com
Rheem manufactures residential and commercial
heating & cooling and water heating products.
Printed in U.S.A.
06/11 WP
SH-15 Rev. 6
Heated Potable
Water
Fresh-air Intake
renovation . rehabilitation . new construc tion .
indoor
environmental
quality
Aprilaire Model 8126 Whole Home Ventilation Control System
Page 1 of 2
Our Products > Aprilaire Model 8126 Ventilation Control System
Get state-of-the-art control to keep your indoor air as
fresh as possible. Installed as part of your home’s heating
and cooling system, the Aprilaire Ventilation Controller makes
decisions regarding when—and how long—to ventilate. It does
this through continuous montinoring of indoor relative humdity,
outdoor temperature, and user-friendly settings.
Features
An Aprilaire Ventilation Control System allows you to manage
the quality of your home’s air year-round, with little effort. An
Aprilaire Ventilation Controller:
• Will not ventilate if the outdoor temperature is above 100° F
• Will not ventilate if the outdoor temperature is below 0° F
• Only ventilates if a call for heat is received by your central
heating system when the outdoor temperature is between 0° F
More Information on This Model:
Owner's Manual
Product Registration
VIEW CONSUMER FEEDBACK
and 20°
• Will not ventilate if the outdoor air will raise indoor relative
humidity above 55%
• Has cycle times ranging from every one to four hours, with
ventilation times lasting from zero to sixty minutes.
< Ventilation
Model 8126
Model 8100
Problems
Allergies
Asthma
Bacteria & Viruses
Colds/Flu
Dust
Mold
Odors
Volatile Organic
Compounds
Consumer Feedback
FAQs
Intelligence
Choosing the right ventilation system is an important decision and investment. Click below to learn more
information about which ventilation system is right for you:
> Humidifiers
> View Frequently Asked Questions about Aprilaire Ventilators
> See Consumer Feedback about Aprilaire Whole-House Ventilators
> Dehumidifiers
> Air Cleaners
> Zoned Comfort Control
> Contact an Aprilaire Dealer, your local Indoor Air Quality Specialist, to discuss your family’s specific needs.
> Thermostats
> Literature
> Portable vs. Whole Home
> Product Registration
Indoor Air Quality | Solve Problems | Whole-Home Products | Humidifiers | Dehumidifiers | Air Cleaners
Zoned Comfort Control | Thermostats | Ventilation | Owner's Center | About Aprilaire | Blog
Find an Aprilaire Dealer | Contact Us | Legal | Privacy Policy | Site Map | Aprilaire News Feed | FOR CONTRACTORS ONLY
http://www.aprilaire.com/index.php?znfAction=ProductDetails&category=16&item=8126
8/11/2011
renovation . rehabilitation . new construc tion .
material
resources
renovation . rehabilitation . new construc tion .
operations and
maintenance