Sharp IG-A10J-R Specifications

IG-A10J-W
IG-A10J-R
IG-A10J-B
ENGLISH
Plasmacluster is trademarks of SHARP
Corporation.
Plasmacluster Ion Generator
OPERATION MANUAL
Read and keep this manual carefully.
IG-A10J.Eng.indd 1
09.10.20 7:29:03 AM
FEATURES
SHARP’s Original Air Disinfecting Technology.
Plasmacluster helps to improve the air quality by eliminating of
airborne mould*1, viruses*2, allergens*3, and adhering odour*4.
1
Release Plasmacluster Ions.
2
Attack Airborne microbes.
3
Plasmacluster Ions are the
same positive and negative
ions found in nature. The
ions are surrounded by water
molecules, and are released
into the air.
The ions form hydroxide
radicals that are highly
oxidizing only when they
adhere to the surfaces of
mould and viruses. They
instantly remove the hydrogen
from the surface proteins,
breaking them down.
Hydroxide (OH) radical
Hydrogen(H)
Protein
Return to the air as water.
The hydroxide (OH) radicals
combine with hydrogen (H) to
form water (H2O) which returns
to the air.
Testing and venfication Organization.
*1 Ishikawa Health Service Association.
*2 Retroscreen Virology, Ltd, UK.
*3 Hiroshima University.
*4 Japan Spinners Inspecting Foundation.
IG-A10J.Eng.indd 2
water (H2O)
GLP*5-compliant test facilities have gathered highly
reliable safety data on Sharp's Plasmacluster
technology.
•Skin irritation/corrosion test
•Eye irritation/corrosion test
•Inhalation toxicity test (lung tissue genetic impact assessment)
Tested by: Mitsubishi Chemical Safety Institute
*5 GLP(Good Laboratory Practice) is a system of
management controls for test facilities and test
procedures designed to ensure the reliability of
chemical safety assessment tests.
09.10.20 7:29:04 AM
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS................ E-2
•WARNING................................................................ E-2
•CAUTIONS CONCERNING OPERATION....................... E-2
•INSTALLATION GUIDELINES...................................... E-2
PARTS NAME......................................................... E-3
•FRONT. ................................................................................ E-3
•BACK.................................................................................... E-3
INSTALLATION POSITION. .......................................... E-4
ENGLISH
CONTENTS
OPERATION....................................................................... E-4
CLEANING AND MAINTENANCE.............................. E-5
adical
•MAIN UNIT. .......................................................................... E-5
•FILTER.................................................................................. E-5
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT.... E-6
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT. ... E-7
SPECIFICATIONS............................................................ E-8
TROUBLESHOOTING.................................................... E-8
• While IG-A10J can inactivate and eliminate suspended viruses
and other contaminants, it cannot create a completely sterile environment. SHARP does not guarantee its ability to prevent microbial infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-A10J will need
to be replaced periodically*.
*Replacement is required approximately every 2 years (17,500 hours) when operated
24 hours a day. IG-A10J will stop operating after about 26 months (19,000 hours) if
the Plasmacluster ion generating unit is not replaced.
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please
read this manual carefully before using the Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future reference.
E-1
IG-A10J.Eng.indd 3
09.10.20 7:29:04 AM
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should be followed, including the following:
WARNING - To reduce the risk of electrical shock, fire, or injury :
• Read all instructions before using the unit.
• Use only a 220-240 volt outlet.
• DO NOT use the unit if the power cord or plug is damaged, or the connection to the wall outlet is loosened.
• Periodically remove dust from the plug.
• DO NOT insert fingers or foreign objects into the air intake or air outlet.
• Always hold the plug and never pull on the cord when removing the power plug.
Electrical shock and/or fire from a short circuit may result.
• DO NOT remove the plug when your hands are wet.
• DO NOT use the unit near gas appliances or fireplaces.
• If the power cord is damaged, it must be replaced by the manufacturer, a Sharp Approved Service Centre or a qualified person in order to avoid a hazard.
• Be cautious when cleaning the unit.
Strong corrosive cleansers may damage the exterior.
• DO NOT use it in the areas where the unit may get wet.
• DO NOT use spray products near the unit.
• DO NOT use in the areas where the unit might be exposed to oil component, incense, cigarettes’ sparks,
and chemical fumes.
• DO NOT operate when using aerosol insecticides or in rooms where there is oily residue, incense, sparks from lit cigarettes, chemical fumes in the air, or in locations where the unit may
get wet, such as a bathroom.
• Only a Sharp Approved Service Centre should service this Plasmacluster Ion Generator.
Contact the nearest Service Centre for any problems, adjustments, or repairs.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that they do not play with the appliance.
CAUTIONS CONCERNING OPERATION:
• DO NOT block the air intake and/or air outlet.
• DO NOT use the unit near or on hot objects, such as stoves or heaters or where it may come
into contact with steam.
• Always operate the main unit in an upright position.
• Clean the exterior with a soft cloth only, otherwise the main unit surface may be damaged or
cracked.
• Keep the main unit away from water.
INSTALLATION GUIDELINES:
• Place at least 2m away from equipment utilizing electric waves such as televisions or radios to
avoid electrical interference when using the unit.
• Avoid using in locations where the unit is exposed to condensation or drastic temperature
changes. Appropriate room temperature is between 0-35ºC.
• Avoid locations where grease or oily smoke is generated, otherwise the main unit surface may
crack as a result.
NOTE - Radio or TV Interference:
If this Plasmacluster Ion Generator causes interference to radio or television reception,
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the unit and radio/TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
E-2
IG-A10J.Eng.indd 4
09.10.20 7:29:04 AM
PARTS NAME
FRONT
Louvres
DISPLAY
(See E-4)
Unit Replacing
Light (red) (See E-6)
Top Cover Cap
ENGLISH
Screws
High (blue)
Air outlet
Top Cover
Operation
Low (blue) Button
Fan Speed
Indicators
Plasmacluster Ion
Generating Unit
(See E-6,7)
Filter (Air Intake)
Filter (Air Intake)
(See E-5)
BACK
Use a pointed object, e.g a pen tip, to press
this button after replacing Plasmacluster Ion
Generating Unit.
Do not press it for any other purpose.
(This is to reset the Unit Replacing Light.)
Power Cord
Plug
E-3
IG-A10J.Eng.indd 5
09.10.20 7:29:05 AM
INSTALLATION POSITION
Place the main unit on a smooth,
stable surface in a room and
insert the plug into an outlet.
DO NOT carry the unit by holding the louvres.
DO NOT USE the below items near the unit.
silicone-containing products*
SPRAY
Installation Guidance.
WAX
PESTICIDES
Leave at least 15cm of clearance behind the Unit.
20cm on both sides, and 1m abore the unit.
ABOVE More than 1m
*Hair care products, cosmetic products,
water proof sprays, polish glass cleaner,
and spray on wax.
BEHIND
More than 15cm
LEFT/RIGHT SIDE
More than 20cm
OPERATION
Press the operation button to directly turn on the power and
select the preferred mode.
LOW
Release high-density
Plasmacluster ions quietly.
HIGH
Increase the volume of
Plasmacluster ions to increase
the purifying capacity.
'OFF'
Power 'OFF'.
Louvres
The air comes from the direction, which is marked with the
sigh on the louvres.
•When releasing ions to the entire room, put each louvres
in opposite directions.
•When releasing ions to the point to deodorise the adhering
odour on clothes, put both louvres in the same direction.
E-4
IG-A10J.Eng.indd 6
09.10.20 7:29:06 AM
CLEANING AND MAINTENANCE
WARNING:
When cleaning the unit, be sure to first unplug the power cord,
and never handle the plug with wet hands.
Electrical shock and/or bodily injury may occur as a result.
Main Unit
ENGLISH
Every month or more often if necessary
Wipe with a dry soft cloth.
<For Stubborn Dirt>rt>
Use water and a mild detergent.
Then wipe with a well wrung-out cloth.
Make sure to dry out the main unit before use.
Filter
Every 2 weeks or more often if necessary
Gently remove dust from the
filters by using a vacuum
cleaner.
<For Stubborn Dirt>
Detach the filter and remove dust with
using a vacuum cleaner.
Filter
Filter
* The filter is not disposable item. Clean it often.
E-5
IG-A10J.Eng.indd 7
09.10.20 7:29:07 AM
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
In order to release Plasmacluster Ions stably, it is necessary to
periodically replace the Ion Generating Unit. The Unit Replacing Light
will be ON as a reminder for replacement.
Display
Elapsed Time
Beginning to use
Message
lighting
(blue)
approx. 17,500 hours
(approx. 2 years if
used 24/7)
flashing(red)
lighting
(blue)
Suggest replacing
approx.19,000 hours
(approx. 2 years and 2
months if used 24/7)
flashing faster
(red)
• Stop working
• Replace the
Plasmacluster
Ion Generating
Unit.
Plasmacluster Ions
are not released.
All lights are
flashing
Error*
*Usage environment affects the lifetime of the Plasmacluster Ion Generator.
The Plasmacluster Ion Generator may stop working before estimated lifetime.
In this case, press Operation button again and restart.
If this does not help, replace with a new Plasmacluster Ion Generating Unit.
Plasmacluster Ion Generating Unit for replacement
Plasmacluster Ion Generating Unit
Model Number
IZ-CA10E
<For Disposal>
Please dispose of the used Plasmacluster
Ion Generating Unit according to any local
laws and regulations.
-materials• Case : Polystyrene
• Unit : Polystyrene Terephthalate, Electric
parts
E-6
IG-A10J.Eng.indd 8
09.10.20 7:29:07 AM
HOW TO REPLACE THE PLASMACLUSTER
ION GENERATING UNIT
*When replacing the Plasmacluster Ion Generating Unit, be sure to turn off the
main unit, unplug the power cord, and never handle the plug with wet hands.
ng
1
Remove the
LOUVRES.
2
Remove the TOP
COVER CAP.
3
Turn the 2 SCREWS
ENGLISH
NT
SCREWS
4
5
Lift up the TOP
COVER.
Replace the
Plasmacluster Ion
Generating Unit.
*See the manual of Plasmacluster Ion
Generating Unit for replacement.
E-7
IG-A10J.Eng.indd 9
09.10.20 7:29:08 AM
SPECIFICATIONS
Model
IG-A10J
Power supply
220-240V 50Hz
(Low)
14.0
6.5
Power consumption (W)
(High)
Operating noise level (dBA)
(High)
44
(Low)
34
Airflow volume(m3/hour)
(High)
102
(Low)
72
Applicable floor surface area (m2)*
10
Power cord (m)
1.8
Outer dimensions (mm)
140
Weight (kg)
160
345 (W
2.5
D
H)
*The target floor surface area for which an emitted airborne ion density of about 25,000 ions/cm3 can
be measured at a point near the center of the room (at a height of about 1.2 m from the floor), during
operation at the HIGH mode when the main unit is placed near a wall.
•The number of ions will vary according to the room conditions and the the main unit operation mode.
TROUBLESHOOTING
Before calling for service, please review the TROUBLESHOOTING chart below,since the problem may
not be a Plasmacluster Ion Generator malfunctions.
Problem
WHAT TO DO
The Plasmacluster Ion Generator
does not work.
flashing faster
(red)
Make sure to put in the plug.
Approx. 2 years and 2 months (approx. 19,000
hours) has been passed.
Replace with a new Plasmacluster Ion
Generating Unit. See page E-6,7.
Plasmacluster Ions are not released.
Press the Operation button and restart.
flashing (red)
If all lights keep flashing, replace with new
Plasmacluster Ion Generating Unit. See page E-6,7.
flashing (blue)
Dust may block the filter, clean the filter.
flashing (blue)
Failure
Unplug and contact the store you purchased the
unit from, or a Sharp Approved Service Centre.
flashing (blue)
The discharged air has odour.
The Plasmacluster Ion Generator releases a
small trace of ozone which may produce odour.
The level of ozone emitted by the unit is within
the safety standards and does not create health
risks.
A clicking or ticking sound comes
from the unit while operating the
Plasmacluster Ion Generator.
Loudness can be changed depending on room
humidity, but the effectiveness is the same. Relocate
the Plasmacluster Ion Generator if necessary.
E-8
IG-A10J.Eng.indd 10
09.10.20 7:29:09 AM
ENGLISH
If you still require service, contact your SHARP Approved Service Centre.
SHARP Approved Service Centre locations can be found in the support area of our website:
Australia : http://www.sharp.net.au
New Zealand : http://www.sharp.net.nz
E-9
IG-A10J.Eng.indd 11
09.10.20 7:29:09 AM
SHARP CORPORATION OF AUSTRALIA PTY.LTD.
A. B. N. 40 003 039 405
1 HUNTINGWOOD DRIVE, HUNTINGWOOD, N.S.W. 2148
P.O.BOX 6827, BLACKTOWN. N.S.W. 2148
www.sharp.net.au
SHARP CORPORATION OF NEW ZEALAND LIMITED
59 HUGO JOHNSTON DRIVE, PENROSE, AUCKLAND
www.sharp.net.nz
Printed in China
TINS-A359KKRZ 09K- CN 1
IG-A10J.Eng.indd 12
09.10.20 7:29:09 AM