Casio PX-350M User`s guide

PX - 350M
Español
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
Safety Precautions
Before trying to use the Digital Piano, be sure to
read the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano digital, asegúrese de
leer las “Precauciones de seguridad” separadas.
PX350-ES-1B
English
ES
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
The P (POWER) indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate
the apparatus in a way that secures easy access to the power cord.
Declaration of Conformity
Model Number: PX-350M
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Important!
Please note the following important information before using this product.
• Before using the AD-A12150LW Adaptor to power the product, be sure to check the AC Adaptor for any damage first. Carefully check the
power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.
• The product is not intended for children under 3 years.
• Use only the CASIO AD-A12150LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
Declaration of Conformity According to EU Directive
This mark applies in EU countries only.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
General Guide........................... E-2
Installing the Music Stand........................................... E-3
Saving Settings and Using Panel Lock....................... E-4
Returning the Digital Piano to Its
Factory Default Settings ............................................. E-4
Power Outlet ............................. E-5
Using an AC Adaptor .................................................. E-5
Turning Power On or Off............................................. E-5
Connections.............................. E-6
Connecting Headphones ............................................ E-6
Connecting a Pedal .................................................... E-6
Connecting Audio Equipment or an Amplifier ............. E-7
Bundled and Optional Accessories............................. E-8
Using Built-in Tones ................ E-9
Selecting a Tone......................................................... E-9
Layering Two Tones ................................................... E-9
Splitting the Keyboard between Two Tones ............. E-10
Using Octave Shift .................................................... E-11
Adjusting the Brilliance of a Tone ............................. E-12
Adding Reverb to the Tone....................................... E-12
Adding the Chorus Effect to the Tone....................... E-13
Using the Metronome ............................................... E-13
Using the Pitch Bend Wheel ..................................... E-14
Playing a Duet .......................................................... E-15
Using Auto
Accompaniment ..................... E-17
Playing an Auto Accompaniment.............................. E-17
Using One-Touch Presets ........................................ E-20
Using Auto Harmonize.............................................. E-20
Creating Your Own Original Rhythms....................... E-21
Playing Demo Songs.............. E-24
Playing Tone Demo Songs ....................................... E-24
Listening to Songs Loaded
from an External Source ........................................... E-25
Playing Back Audio Data Stored
on a USB Flash Drive ............................................... E-27
Music Presets ......................... E-28
Selecting a Music Preset .......................................... E-28
Creating an Original User Preset.............................. E-29
Registering Tone and
Rhythm Setups ....................... E-33
Recording Your
Keyboard Play ........................E-35
Recording to Built-in Song Memory
(Song Recorder)........................................................ E-35
Recording or Playing Back Multiple Songs ............... E-36
Recording to a Specific Track (Part) ......................... E-37
Deleting Data Recorded with the Song Recorder ..... E-38
Re-recording Part of a Recorder Song
(Punch-in Recording) ................................................ E-39
Recording to a USB Flash Drive (Audio Recorder)... E-41
Other Settings.........................E-43
Configuring Settings.................................................. E-43
USB Flash Drive .....................E-47
Storing Standard Audio Data (WAV Files)
to a USB Flash Drive................................................. E-48
Connecting a USB Flash Drive to and
Detaching It from the Digital Piano............................ E-48
Formatting a USB Flash Drive .................................. E-49
Saving Digital Piano Data to a USB Flash Drive....... E-49
Loading Data from a USB Flash Drive to
Digital Piano Memory ................................................ E-50
Deleting Data from a USB Flash Drive...................... E-51
Renaming a USB Flash Drive File ............................ E-51
Playing Back a Song on a USB Flash Drive ............. E-52
Error Messages......................................................... E-53
Connecting to a Computer ....E-54
Minimum Computer System Requirements .............. E-54
Connecting the Digital Piano to Your Computer ....... E-54
Using MIDI ................................................................ E-55
Transferring Data between
the Digital Piano and a Computer ............................. E-55
Reference ................................E-58
Troubleshooting ........................................................ E-58
Product Specifications............................................... E-60
Operating Precautions .............................................. E-62
Appendix ...................................A-1
Tone List ..................................................................... A-1
Drum Assignment List ................................................. A-4
Rhythm List ................................................................. A-5
Music Preset List......................................................... A-7
Fingering Guide........................................................... A-9
Chord Example List................................................... A-10
MIDI Implementation Chart
Company and product names used in this
manual may be registered trademarks of others.
E-1
English
Contents
General Guide
1
2
3
4
bn
bo
5
bp
6
bq
cl
7
br
8
bs
9
bk
bl
ck
bt
∗
ek
cm
cn
co
cp
cq
cr
cs
dk
dl
dm
dn
do
dp
dq
ct
dr
dt
ds
Back
el
Bottom
E-2
em
en
eo
es
ep
eq
er
bm
General Guide
• This manual uses the numbers and names below to refer to buttons and controllers.
cp STRINGS button
2 VOLUME controller
cq VARIOUS button
3 METRONOME button
cr GM TONES button
4 SONG RECORDER button
cs FUNCTION button
5 POPS/DANCE/ROCK button
ct w/NO, q/YES buttons
6 JAZZ/EUROPEAN button
dk BANK, REVERB button
7 LATIN button
dl REGISTRATION 1/A, CHORUS button
8 WORLD button
dm REGISTRATION 2/B, EXIT button
9 COUNTRY/VARIOUS button
dn REGISTRATION 3/C, u button
bk BALLAD button
do REGISTRATION 4/D, i button
bl PIANO RHYTHMS button
dp STORE, ENTER button
bm USER RHYTHMS button
dq SPLIT, SPLIT POINT button
bn RHYTHM, USER SONGS button
dr AUTO HARMONIZE, USB DEVICE MODE button
bo INTRO, REPEAT button
ds AUDIO RECORDER, LOAD/SAVE button
bp NORMAL/FILL-IN, sREW button
dt USB flash drive port
bq VARIATION/FILL-IN, dFF button
ek PITCH BEND wheel
br SYNCHRO/ENDING, PAUSE button
el USB port
bs START/STOP, PLAY/STOP button
em DAMPER, SOFT/SOSTENUTO PEDAL jacks
bt ACCOMP ON/OFF, PART button
en MIDI OUT/IN terminals
ck TEMPO, RHYTHM EDITOR, MUSIC PRESET
eo LINE OUT R, L/MONO jacks
buttons
cl
Display
cm GRAND PIANO button
cn ELEC PIANO button
co
English
1 P (POWER) button
ep DC 12V terminal
eq LINE IN R, L/MONO jacks
er PHONES jacks
es Pedal connector
ORGAN button
* Installing the Music Stand
Insert the bottom of the music stand into the
groove on the top of the Digital Piano’s
console.
E-3
General Guide
Saving Settings and Using
Panel Lock
Your Digital Piano lets you save its current settings,
and lock its buttons to protect against operation errors.
For details, see “Setting Backup” (page E-46) and
“Panel Lock” (page E-46).
Returning the Digital Piano to
Its Factory Default Settings
Perform the following procedure when you want to
return the Digital Piano’s stored data and settings to
their initial factory defaults.
1.
2.
Turn off the Digital Piano.
While holding down both the cr (GM TONES)
and cs (FUNCTION) buttons, press the 1
(P) button.
• The Digital Piano will turn on and initialize its
internal system. You will be able to use the Digital
Piano in a short while.
NOTE
• See “Turning Power On or Off” (page E-5) for
information about turning power on and off.
E-4
Your Digital Piano runs on standard household power.
Be sure to turn off power whenever you are not using
the Digital Piano.
Turning Power On or Off
1.
Using an AC Adaptor
• Do not touch the keyboard, pedal, or buttons while
the “Please wait . . .” message is on the display. Doing
so will cause malfunction.
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Piano. Use
of a different type of AC adaptor can cause
malfunction of the Digital Piano.
Specified AC Adaptor: AD-A12150LW
• Use the supplied power cord to connect the AC
adaptor as shown in the illustration below.
Household power outlet
Power cord
DC 12V terminal
AC adaptor
• Configuration and type depends
on your geographic location.
Note the following important precautions to avoid
damage to the power cord.
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
During Movement
• Before moving the Digital Piano, be sure to unplug
the AC adaptor from the power outlet.
During Storage
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
IMPORTANT!
• Never connect the AC adaptor (JEITA Standard,
with unified polarity plug) that comes with this Digital
Piano to any other device besides this Digital Piano.
Doing so creates the risk of malfunction.
• Make sure the Digital Piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
Press the 1 (P) button to turn on Digital
Piano power.
• Use the Digital Piano’s VOLUME controller (2) to
adjust the volume.
2.
To turn off the Digital Piano, hold down the 1
(P) button until the Digital Piano’s display
goes blank.
NOTE
• Pressing the 1 (P) button to turn off power
actually puts the Digital Piano into a standby state.
Minute amounts of current continue to flow within
the Digital Piano in the standby state. If you do not
plan to use the Digital Piano for a long time or if
there is a lightning storm in your area, be sure to
unplug the AC adaptor from the power outlet.
Auto Power Off
This Digital Piano is designed to turn off automatically
to avoid wasting power after no operation is
performed for a preset amount of time. The Auto
Power Off trigger time is about four hours.
• You also can use the procedure below to temporarily
suspend Auto Power Off.
■ To disable Auto Power Off
1.
While the Digital Piano is turned on, press the
1 (P) button to turn it off.
2.
While holding down the cs (FUNCTION)
button, press the 1 (P) button to turn on the
Digital Piano.
• Auto Power Off will be disabled at this time.
NOTE
• Turning off the Digital Piano after performing the
above steps will re-enable Auto Power Off.
B
E-5
English
Power Outlet
Connections
Connecting Headphones
IMPORTANT!
• Before connecting headphones, be sure to use the
Digital Piano’s VOLUME controller to turn the
volume down to a low level. After connecting, you
can adjust the volume to the level you want.
• The Digital Piano automatically adjusts sound output
to optimize for headphones (when headphones are
connected) or the built-in speakers (when
headphones are not connected).
Back
PHONES jacks
Commercially
available headphones
Connecting a Pedal
The back of the Digital Piano has two pedal jacks, one
for a damper pedal and one for a soft/sostenuto pedal.
To connect to the pedal jack
Depending on the type of operation you want the
pedal (SP-3) to perform, connect the pedal’s cable
either to the Digital Piano’s DAMPER PEDAL jack or
SOFT/SOSTENUTO PEDAL jack. If you want to use
both operations (jacks) at the same time, you need to
purchase another optionally available pedal.
Back
PEDAL jacks
Standard plug
SP-3
Connect commercially available headphones to the
PHONES jacks. Connecting headphones to either of
the PHONES jacks cuts off output to the speakers,
which means you can practice even late at night
without bothering others. To protect your hearing,
make sure that you do not set the volume level too high
when using headphones.
NOTE
• You can connect a pedal to the SOFT/SOSTENUTO
PEDAL jack and apply either a soft or sostenuto
effect to the notes you play. For details, see “Soft/
Sostenuto Pedal Jack Setting” (page E-46).
NOTE
• Be sure to push the headphones plug into the
PHONES jacks as far as it will go. If you don’t, you
may hear sound from only one side of the
headphones.
• If the plug of the headphones you are using does not
match the PHONES jacks, use the applicable
commercially available adaptor plug.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.
Pedal Functions
z Damper Pedal
Pressing the damper pedal while playing will cause the
notes you play to reverberate for a long time.
• Whenever a piano tone is selected, pressing this
pedal will activate the Digital Piano’s Damper
Resonance effect, which causes notes to resonate in
the same way they do when the damper pedal on an
acoustic piano is pressed.
z Soft Pedal
Pressing this pedal suppresses notes played on the
keyboard after the pedal was pressed, and makes them
sound softer.
z Sostenuto Pedal
Only the notes that are played while this pedal are
depressed are sustained until the pedal is released.
E-6
Connections
You can connect the optionally available 3-Pedal Unit
(SP-33) to the pedal connector on the bottom of the
Digital Piano. You can then use the pedals for
expression that is similar to that available on an
acoustic piano.
Bottom
Pedal connector
Connecting Audio Equipment
or an Amplifier
You can connect audio equipment or a music amplifier
to the Digital Piano and then play through external
speakers for more powerful volume and better sound
quality.
IMPORTANT!
NOTE
• The SP-33 Pedal Unit supports half-pedal operation
(pressing the pedal part way). You can adjust the
amount of the effect is applied when the damper
pedal is pressed part way. For details, see “Half
Pedal Effect” (page E-46).
• The optionally available CS-67P special stand is
required in order to use the SP-33 Pedal Unit.
• The Digital Piano automatically adjusts sound output
to optimize for headphone output (when headphones
are connected) or built-in speaker output (when
headphones are not connected). This also will cause
a change in the output quality from the Digital
Piano’s LINE OUT R and L/MONO jacks.
• Whenever connecting a device to the Digital Piano,
first use the VOLUME controller to set the volume to
a low level. After connecting, you can adjust the
volume to the level you want.
• Whenever you connect any device to the Digital
Piano, be sure to read the user documentation that
comes with the device.
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
Standard plug
INPUT 2
Tape recorder,
MIDI sound source, etc.
Standard jack
Audio amplifier AUX IN jack, etc.
LEFT (White)
RIGHT (Red)
Pin plug
E-7
English
Pedal Connector
Connections
Playing Output from External Equipment
through the Digital Piano’s Speakers 1
Use commercially available cables to connect the
external audio equipment to the Digital Piano’s
LINE IN jacks as shown in Figure 1.
LINE IN R jack input sounds through the Digital
Piano’s right speaker, while LINE IN L/MONO jack
input sounds through the left speaker. Connecting to
the LINE IN L/MONO jack only causes the same
output to be produced from both speakers. It is up to
you to purchase connecting cables that are compatible
with the equipment you are connecting.
Connecting to Audio Equipment 2
Use commercially available cables to connect the
external audio equipment to the Digital Piano’s
LINE OUT jacks as shown in Figure 2. LINE OUT R
jack output is right channel sound, while LINE OUT
L/MONO jack output is left channel sound. It is up to
you to purchase connecting cables like the ones shown
in the illustration for connection of audio equipment.
Normally in this configuration you must set the audio
equipment’s input selector to the setting that specifies
the terminal (such as AUX IN) to which the Digital
Piano is connected. Use the Digital Piano’s VOLUME
controller to adjust the volume level.
Connecting to a Musical Instrument
Amplifier 3
Use commercially available cables to connect the
amplifier to the Digital Piano’s LINE OUT jacks as
shown in Figure 3. LINE OUT R jack output is right
channel sound, while LINE OUT L/MONO jack
output is left channel sound. Connecting to the
LINE OUT L/MONO jack only outputs a mixture of
both channels. It is up to you to purchase connecting
cable like the one shown in the illustration for
connection of the amplifier. Use the Digital Piano’s
VOLUME controller to adjust the volume level.
IMPORTANT!
• When using the LINE OUT jacks, also connect
headphones to the PHONES jacks. This will switch
the LINE OUT output to appropriate sound quality.
E-8
Bundled and Optional
Accessories
Use only accessories that are specified for use with this
Digital Piano.
Use of unauthorized accessories creates the risk of fire,
electric shock, and personal injury.
NOTE
• You can get information about accessories that are
sold separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
http://world.casio.com/
3
bn
bt
ck
Selecting a Tone
Your Digital Piano has 250 tones, divided into six
groups.
• For more information, see the “Tone List” (page
A-1).
• The Digital Piano has built-in demonstration tunes
that highlight the different characteristics of tones.
For more information, see “Playing Tone Demo
Songs” (page E-24).
1.
Use the “Tone List” (page A-1) to look up the
group and the number of the tone you want to
select.
2.
Use the cm to cr (tone groups) buttons to
select the group you want.
Example: To select the ORGAN group
Lit
3.
cm cn co cp cq cr
cs
dk dl
dq
dn do dp
English
Using Built-in Tones
ct
NOTE
• Pressing q and w at the same time will jump to
tone 001 of the currently selected group. Holding
down either button changes the tone number at high
speed.
• See page E-43 for more information about scrolling.
Layering Two Tones
You can layer two different tones so they play at the
same time when you press a keyboard key.
• The first tone you select is called the “main tone”,
while the second tone is called the “layered tone”.
1.
Select the main tone.
Example: To select GRAND PIANO MELLOW in the
GRAND PIANO group, press the cm
(GRAND PIANO) button and then use the
ct (w, q) buttons to select “006 GRAND
PIANO MELLOW”.
Use the ct (w, q) buttons to select the
tone you want.
Example: To select “002 Jazz Organ”
Tone number
Tone name
E-9
Using Built-in Tones
2.
Hold down the button of the group that
contains the tone you want to select as the
layered tone until “LAYER ON” appears on
the display as shown below for a few
moments.
This will layer the tones currently selected in the two
groups.
Splitting the Keyboard
between Two Tones
You can split the keyboard so the left side (lower
range) plays one tone and the right side (upper range)
plays a different tone.
Example: To split the keyboard between the GM SLAP
BASS 1 tone on the left (lower range) and the
GRAND PIANO CONCERT tone on the right
(upper range).
Left (Lower Range)
Tone: GM SLAP BASS 1
The button you held down in step 2 will light to
indicate that it is selected.
Example: When VARIOUS group is selected
1.
Lit
Right (Upper Range)
Tone: GRAND PIANO CONCERT
Press the dq (SPLIT) button.
This causes the SPLIT lamp to light, indicating that the
keyboard is split between two tones.
Lit
3.
Use the ct (w, q) buttons to select the
tone you want in the group you selected in
step 2.
Example: When “006 Picked Bass” is selected
2.
Layered tone number
Select the tone you want to assign to the left
side (lower range) of the keyboard.
Example: To select GM SLAP BASS 1 in the GM TONES
group, press the cr (GM TONES) button and
then use the ct (w, q) buttons to select
“037 GM SLAP BASS 1”.
Layered tone name
Lit
4.
Left tone number
To unlayer the tones and return the keyboard
to a single tone, press any one of the tone
group buttons.
Left tone name
NOTE
• You can adjust the balance between the main tone
and layered tone. For details, see “Layered Tone
Volume (Layer Balance)” (page E-44).
3.
To unsplit the keyboard and return it to a
single tone, press the dq (SPLIT) button.
The SPLIT lamp will go out, indicating that the
keyboard is no longer split.
NOTE
• If the keyboard is set up with layered tones (page
E-9) when you perform the above split operation,
the layered tones will play on the right (upper
range) side of the keyboard.
E-10
Using Built-in Tones
You can use the procedure below to specify the
location on the keyboard where it splits between the
left side and the right side. That location is called the
“split point”.
Left (Lower Range) side
Right (Upper Range) side
Using Octave Shift
After you split the keyboard (page E-10), you may find
out that the lower range notes on the left are too low or
that the upper range notes on the right are too high.
You can use octave shift to shift the octaves of the
upper range and lower range upwards or downwards
in octave units.
1.
This displays the octave shift screen.
Split point
1.
While holding down the cs (FUNCTION)
button, press the cm (GRAND PIANO) button.
Hold down the dq (SPLIT) button until the
split point setting screen appears on the
display as shown below.
Currently selected range
Shift amount
2.
Current split point key name
2.
Use the bt (PART) button to select the range
whose octave you want to change.
• Each press of bt (PART) cycles through the ranges
below.
Press the keyboard key where you want to
specify as the leftmost key of the right (upper
range) tone.
U1 (Upper1): Main tone
U2 (Upper2): Layered tone
This specifies the split point.
3.
Press the dq (SPLIT) button.
L1 (Lower1): Left (lower range) tone
This exits the split point screen.
3.
Use the ct (w, q) buttons to shift the
octave of the currently selected range.
• You can shift the octave within the range of –2 to 0 to
2.
4.
Press the cs (FUNCTION) button.
This exits the octave shift screen.
NOTE
• Octave shift also can be performed as described for
“Octave Shift” (page E-44).
E-11
English
Moving the Keyboard Split Point
Using Built-in Tones
Adjusting the Brilliance of a
Tone
1.
Adding Reverb to the Tone
1.
Press the cs (FUNCTION) button.
While holding down the cs (FUNCTION)
button, press the dk (REVERB) button.
This will display a reverb type selection screen.
The FUNCTION lamp will light and the function screen
will appear on the display.
Lit
2.
Use the do (i) and dn (u) buttons to select
the Tmpr/Effect screen.
2.
Use the ct (w, q) buttons to select the
reverb type you want.
• The following shows the five available reverb type
settings.
3.
Press the dp (ENTER) button.
This will display a screen for selecting settings in the
Tmpr/Effect group.
4.
Use the do (i) or dn (u) button to select
the brilliance screen shown below.
5.
Use the ct (w, q) buttons to adjust the
brilliance of the currently selected tone. You
can adjust brilliance in the range of –3 to 0 to 3.
w : Mellower and softer
q : Brighter and harder
6.
Press the cs (FUNCTION) button.
This will exit the brilliance screen and cause the
FUNCTION lamp to go out.
NOTE
• See “Other Settings” (page E-43) for details about
using the cs (FUNCTION) button.
E-12
0: OFF (no reverb)
1: Room
2: Hall
3: Large Hall
4: Stadium
3.
Press the cs (FUNCTION) button.
This exits the reverb type selection screen.
Using Built-in Tones
1.
Using the Metronome
1.
Press the 3 (METRONOME) button.
English
Adding the Chorus Effect to
the Tone
This will start the metronome.
While holding down the cs (FUNCTION)
button, press the dl (CHORUS) button.
This will display a chorus type selection screen.
Lights with the first beat
of each measure
2.
Use the ct (w, q) buttons to select the
chorus type you want.
• The following shows the five available chorus type
settings.
0: OFF (no chorus)
1: Light Chorus
2: Chorus
3: Deep Chorus
4: Flanger
3.
Press the cs (FUNCTION) button.
This exits the chorus type selection screen.
2.
Lights with each
subsequent beat of
each measure
Press the 3 (METRONOME) button again to
stop the metronome.
Changing the Beats Per Measure
You can specify from two to six beats per measure for
the metronome. After you do, a chime will sound at the
beginning of each measure. Specifying 0 for this setting
will sound a straight beat, without a chime. This setting
lets you practice with a steady beat.
1.
Hold down the 3 (METRONOME) button
until the number of beats per measure screen
shown below appears on the display.
2.
Use the ct (w, q) buttons to select the
beats per measure value you want.
3.
Press the 3 (METRONOME) button to exit
the number of beats per measure screen.
E-13
Using Built-in Tones
Changing the Tempo Setting
Adjusting the Metronome Volume
There are two different methods you can use to change
the tempo setting: by pressing ck (q) (faster) and ck
(w) (slower) buttons or by tapping a beat with a
button.
■ To adjust the tempo using ck (TEMPO, w,
q) buttons
1.
You can use the following procedure to adjust the
volume level of the metronome, without affecting the
volume of Digital Piano output.
1.
While holding down the cs (FUNCTION)
button, press the 3 (METRONOME) button.
This displays the metronome volume screen.
Use the ck (TEMPO, w, q) buttons to
adjust the tempo setting.
Each press of a button increases or decreases the beats
per minute value by one.
• Holding down either button changes the value at
high speed.
• You can specify a tempo value in the range of 20 to
255.
Metronome volume
2.
Use the ct (w, q) buttons to adjust the
metronome volume.
3.
Press the cs (FUNCTION) button.
This will exit the metronome volume screen and cause
the FUNCTION lamp to go out.
Tempo value
NOTE
■ To adjust the tempo by tapping a beat
1.
Tap the ck (TEMPO, TAP) button four times
in time with the beat you want to specify.
• The tempo setting will change in accordance with the
timing of your tapping.
Tap four times
• You also can use the procedure under “Metronome
Volume” (page E-44) to adjust the metronome
volume.
Using the Pitch Bend Wheel
You can use the pitch bend wheel to slide the pitch of
notes smoothly upwards and downwards. This
capability makes it possible to reproduce saxophone
and electric guitar choking effects.
Adding a Pitch Bend Effect
• After you use this method to specify the approximate
tempo, you can then use the procedure under “To
adjust the tempo using ck (TEMPO, w, q)
buttons” to adjust the setting to a more exact value.
1.
While playing a note on the
keyboard, rotate the pitch bend
wheel on the left of the keyboard
upwards or downwards.
The amount the note bends depends on
how much you rotate the pitch bend
wheel.
• Do not have the pitch bend wheel
rotated as you turn on the Digital Piano.
NOTE
• You also can configure pitch bend wheel operation
by specifying the amount of pitch change at
maximum rotation in either direction. See “Pitch
Bend Range” (page E-46) for more information.
E-14
Using Built-in Tones
You can use the Duet Mode to split the Digital Piano’s
keyboard in the center so two people can play a duet.
This makes it possible to configure the keyboard so, for
example, the teacher can play on the left and the
student can follow along on the right. Or one person
can play the left hand part on the left, while another
plays the right hand part on the right.
Left keyboard
1.
Press the bn (USER SONGS) button so its
lower lamp is lit.
Right keyboard
Lit
C3
C4
C5
C6
(Middle C)
C3
C4
C5
C6
(Middle C)
2.
This causes the Duet Mode on/off screen to appear.
• The keyboard keys are disabled while this screen is
displayed.
Pedal Operation when Playing a Duet
z Optional SP-33 Pedal Unit
Left keyboard
damper pedal
While holding down the cs (FUNCTION)
button, press the dq (SPLIT) button.
Right side damper pedal
(Half-pedal operation
supported)
Left and right side damper pedal
z Supplied SP-3 Pedal Unit
To use the SP-3 Pedal Unit as the right keyboard
damper pedal, connect it to the em (DAMPER PEDAL)
terminal.
• Half-pedal operation is not supported in this case.
To use the SP-3 Pedal Unit as the left keyboard (initial
default setting) or right keyboard damper pedal
(selectable), connect it to the em (SOFT/SOSTENUTO
PEDAL) terminal.
• For information about how to select left or right
keyboard control with the SP-3 Pedal Unit, see
“Soft/Sostenuto Pedal Jack Setting” (page E-46).
3.
Press the ct (q) button to turn on the Duet
Mode.
This will cause the dq (SPLIT) button lamp to flash.
4.
Press the cs (FUNCTION) button.
This exits the Duet mode on/off screen and configures
the Digital Piano’s keyboard for duet play.
5.
To turn off the Duet Mode, press the dq
(SPLIT) button so the SPLIT lamp goes out.
NOTE
• You also can use the procedure under “Duet Mode”
(page E-44) to turn the Duet Mode on or off.
E-15
English
Configuring the Digital Piano for Duet
Play
Playing a Duet
Using Built-in Tones
Changing the Octave of a Duet Mode
Keyboard
You can use the following procedure to change the
octave of the left and right Duet Mode keyboards.
1.
While holding down the cs (FUNCTION)
button, press the dq (SPLIT) button.
This displays the Duet Mode on/off screen shown in
step 2 under “Configuring the Digital Piano for Duet
Play” (page E-15). If the Duet Mode is currently turned
off, press the ct (q) button to turn it on.
2.
Of the four C keys in the left keyboard, press
the one that you want to have located at
middle C.
• This will sound the note assigned to C4 and change
the octave of the left keyboard.
Example: To change the configuration so the leftmost C
key is middle C as shown below.
Leftmost C key (Pressed key)
C4
C5
C6
C7
1 octave higher than initial setting
C3
C4
C5
C6
Unchanged
3.
You can use the same procedure as step 2 to
select one of the C keys in the right keyboard
to shift its octave as well.
4.
Press the cs (FUNCTION) button.
This exits the Duet Mode on/off screen and causes the
cs (FUNCTION) button lamp to go out.
The left and right keyboards will be configured
according to your settings.
NOTE
• Turning off the Duet Mode will clear your octave
shift settings and return the keyboard to its initial
default settings.
E-16
5 6 7 8 9 bk bl bm
bn
bo bp bq br bs
bt
ck
With Auto Accompaniment, simply select the
accompaniment rhythm you want and the matching
accompaniment (drums, guitar, etc.) will play
automatically when you play a chord with your left
hand. It’s like having your own personal backup group
along with you wherever you go.
This Digital Piano has 180 built-in Auto
Accompaniment patterns, which are divided into
seven groups. You can edit built-in rhythms to create
your own original rhythms (called “user rhythms”),
which you can save in a eighth group. For more
information, see the “Rhythm List” (page A-5).
Playing an Auto
Accompaniment
1.
cm cn co cp
Press the bn (RHYTHM) button so its upper
lamp is lit.
This enables Auto Accompaniment.
• Each press of the button toggles between the
RHYTHM and USER SONGS lamps.
cs
dm dn do dp
4.
English
Using Auto Accompaniment
ct
dr
Use the ct (w, q) buttons to select the
rhythm you want.
Example: When “005 Samba 2” is selected
Rhythm name
Rhythm number
5.
Tempo
Measure
Use the ck (TEMPO, w, q) buttons to
adjust the tempo setting.
• This is the same as metronome tempo adjustment
(page E-13).
• To return the rhythm to its standard tempo setting,
press the ck (TEMPO, w, q) buttons at the same
time.
Lit
2.
Use the “Rhythm List” (page A-5) to look up
the group and the number of the rhythm you
want to select.
3.
Use the 5 to bm (rhythm groups) buttons to
select the group you want.
Example: When the LATIN group is selected
Lit
B
E-17
Using Auto Accompaniment
6.
Press the bt (ACCOMP ON/OFF) button so
its lamp is lit.
This turns ACCOMP on, so all accompaniment parts
sound.
• Turning ACCOMP off so the ACCOMP lamp is unlit
causes only the percussion instrument parts to sound.
• Each press of the bt (ACCOMP ON/OFF) button
toggles ACCOMP on and off.
Lit
9.
Play other chords with left hand as you play
the melody with your right hand.
• You can use “CASIO Chord” or other simplified
chord fingering modes to play chords. For details, see
“Selecting a Chord Fingering Mode” in the following
section.
• You can use the bp (NORMAL) and bq
(VARIATION) buttons to modify accompaniment
patterns. For details, see “Modifying Auto
Accompaniment Patterns” (page E-20).
10. When you are finished, press the bs (START/
7.
Press the br (SYNCHRO/ENDING) button.
This puts Auto Accompaniment into “synchro
standby”. Playing a chord during synchro standby will
cause Auto Accompaniment to start to play
automatically.
• Pressing the bo (INTRO) button while Auto
Accompaniment is in synchro standby will enter
intro standby. Pressing the bq (VARIATION) button
will enter variation standby. For details about intro
and variation patterns, see “Modifying Auto
Accompaniment Patterns” (page E-20).
Flashing
8.
Play the chord you want on the chord
keyboard (left keyboard keys).
Auto Accompaniment will start playing when you play
the chord.
• To start percussion part play without playing a
chord, press the bs (START/STOP) button.
Example: To play a C chord
Chord keyboard
E-18
Melody keyboard
STOP) button again to stop Auto
Accompaniment.
• Pressing the br (SYNCHRO/ENDING) button
instead of the bs (START/STOP) button will play an
ending pattern before stopping Auto
Accompaniment play. For details about ending
patterns, see “Modifying Auto Accompaniment
Patterns” (page E-20).
NOTE
• You can use the following procedure to adjust the
volume level of the Auto Accompaniment, without
affecting the volume of Digital Piano output. For
details, see “Auto Accompaniment Volume” (page
E-44).
• You can change the size of the chord keyboard by
using the split feature to move the split point (page
E-11). The keyboard keys to the left of the split point
make up the chord keyboard.
Using Auto Accompaniment
You can select from among the following five chord
fingering modes.
1: Fingered 1
2: Fingered 2
3: Fingered 3
4: CASIO Chord
5: Full Range
1.
■ CASIO CHORD
With “CASIO Chord”, you can use simplified
fingerings to play the four types of chords described
below.
Chord keyboard
Hold down the bt (ACCOMP ON/OFF) button
until the chord type selection screen appears
on the display.
Chord Type
Example
Major Chords
Press one key, whose note
corresponds to the chord
name.
• To play C Major, press any
C key in the chord
keyboard. The octave of the
note does not matter.
C (C Major)
C C#DE b E F F#GAb A Bb B C C#DE b E F
Note name
Minor Chords
Cm (C minor)
Press the chord keyboard key
that corresponds to the major
chord, while also pressing one
other chord keyboard key to
the right.
C C#DE b E F F#GAb A Bb B C C#DE b E F
Chord fingering mode
2.
3.
Use the ct (w, q) buttons to select the
chord fingering mode you want.
Press the bt (ACCOMP ON/OFF) button.
This exits the chord fingering screen.
■ Fingered 1, 2, 3
With these three chord fingering modes, you play
chords on the chord keyboard using their normal
chord fingerings. Some chord forms are abbreviated,
and can be fingered with one or two keys.
For information about the types of chords you can
finger and their fingerings, see the “Fingering Guide”
(page A-9).
Chord keyboard
Seventh Chords
Press the chord keyboard key
that corresponds to the major
chord, while also pressing
two other chord keyboard
keys to the right.
C7 (C seventh)
Minor Seventh Chords
Press the chord keyboard key
that corresponds to the major
chord, while also pressing
three other chord keyboard
keys to the right.
Cm7 (C minor seventh)
C C#DE b E F F#GAb A Bb B C C#DE b E F
C C#DE b E F F#GAb A Bb B C C#DE b E F
When pressing more than one chord keyboard key,
makes no difference whether the additional keys are
white or black.
■ FULL RANGE CHORD
Fingered 1: Play the component notes of the chord on the
keyboard.
Fingered 2: Unlike Fingered 1, 6th input is not possible with
this mode.
Fingered 3: Unlike Fingered 1, this mode allows input of
fraction chords with the lowest keyboard note as
the bass note.
With this chord fingering mode, you can use the full
range of the keyboard to play chords and the melody.
For information about the types of chords you can
finger and their fingerings, see the “Fingering Guide”
(page A-9).
Melody keyboard
Chord keyboard
E-19
English
Selecting a Chord Fingering Mode
Using Auto Accompaniment
Modifying Auto Accompaniment Patterns
There are six different Auto Accompaniment patterns,
shown below. You can switch between patterns during
accompaniment play and even modify patterns. Use
buttons bo through br to select the pattern you want.
bo
Intro *1
bp
Normal
Normal fill-in *2
bq
Variation
br
Using One-Touch Presets
One-Touch Preset gives you one-touch access to tone
and tempo settings that go well with the currently
selected Auto Accompaniment rhythm pattern.
1.
This will configure tone, tempo, and other settings to
match the currently selected rhythm pattern. At this
time, Auto Accompaniment play also will go into
synchro standby, which means that Auto
Accompaniment will start to play automatically when
you finger a chord.
Ending *4
Variation fill-in *3
Hold down the bn (RHYTHM) button for at
least two seconds.
2.
Play a chord on the keyboard.
This will start Auto Accompaniment play.
*1 Press at the beginning of a song.
Accompaniment play proceeds with the normal
pattern after the intro pattern is complete. Pressing
the bq (VARIATION/FILL-IN) button before
pressing this button will proceed with the variation
pattern after the intro pattern is complete.
*2 Press while a normal pattern is playing to insert a
fill-in pattern.
*3 Press while a variation pattern is playing to insert a
fill-in variation pattern.
*4 Press at the end of a song.
This will play an ending pattern and then stop Auto
Accompaniment.
NOTE
• One-Touch Presets are not supported for user
rhythms (001 through 010 of the USER RHYTHMS
group).
Using Auto Harmonize
Auto Harmonize lets you add harmony to melody
notes you play with your right hand. You can select
any one of 12 Auto Harmonize settings.
1.
Press the dr (AUTO HARMONIZE) button.
Type number
E-20
Type name
Using Auto Accompaniment
Use the ct (w, q) buttons to select the
Auto Harmonize type you want.
Type
Number
3.
Type Name
Description
00
Off
Turns off Auto Harmonize.
01
Duet 1
Adds close (separated by two to
four degrees) one-note harmony
below the melody note.
02
Duet 2
Adds open (separated by more
than 4 to 6 degrees) 1-note
harmony below the melody
note.
03
Country
Adds country style harmony.
04
Octave
Adds the note from the next
lower octave.
05
5th
Adds the fifth degree note.
06
3-Way Open
Adds 2-note open harmony, for
a total of three notes.
07
3-Way Close
Adds 2-note close harmony, for
a total of three notes.
08
Strings
Adds harmony that is optimal
for strings.
09
4-Way Open
Adds 3-note open harmony, for
a total of four notes.
10
4-Way Close
Adds 3-note close harmony, for
a total of four notes.
11
Block
Adds block chord notes.
12
Big Band
Adds big band style harmony.
Press the dr (AUTO HARMONIZE) button.
This will exit the auto harmonize screen.
4.
While playing chords, play the melody on the
keyboard.
Creating Your Own Original
Rhythms
You can use rhythm editing to modify a built-in Auto
Accompaniment rhythm to create an original “user
rhythm” of your own. You can select a part (drum,
bass, etc.) of a normal, intro, or other pattern (page
E-20) and turn it on or off, adjust its volume level, and
perform other operations.
1.
Select the number of the Auto
Accompaniment rhythm you want to edit.
2.
At the same time, press the cs (FUNCTION)
and ck (RHYTHM EDITOR) buttons.
This displays the rhythm editor screen.
3.
Use the accompaniment pattern buttons (bo
through br) to select the pattern (normal,
intro, ending, etc.) you want to edit.
The button you press will light, indicating that the
pattern is being edited.
• Each press of bp (NORMAL/FILL-IN) toggles
between NORMAL and FILL-IN, and each press of
bq (VARIATION/FILL-IN) toggles between
VARIATION and FILL-IN. The applicable button
flashes while the fill-in pattern is selected.
Example: When intro is selected
bo
bp
bq
br
Harmony will be added to your melody notes based on
the chords you play.
B
E-21
English
2.
Using Auto Accompaniment
4.
Use the instrument part buttons (5 through
bm) to select the part (drums, bass etc.) you
want to edit.
The name of the part you select will appear on the
display. Rhythm patterns are made up of the eight parts
shown below.
• Button illumination does not change when you press
the instrument part buttons (5 through bm). Button
illumination indicates whether there is
accompaniment data corresponding to each part.
Parts
Drums
Percussion
5
6
Bass
Description
Setting
Rhythm
Select:
Rhythm
Replaces the part
(drum, bass, etc.)
accompaniment
data with that of
the specified
rhythm number. *1
001 to 190:
Rhythm
number *2 *3
cm
Tone
Select:
Tone
Switches the part
tone (instrument)
to that of the
specified tone
number.
001 to 250: Tone
Numbers *2 *4
cn
Prt:
Part on/
off
Toggles each part
on or off.
OFF:
Mutes the part.
ON:
Sounds the
part.
Vol:
Volume
level
Controls the
volume level of
each part.
000 to 127
Pan:
Panning
(position)
Controls whether
the sound of the
part can be heard
–64 to 0 to 63 *5
from the left side or
right side.
Reverb:
Reverb
Controls the level
of the reverb effect
000 to 127
(page E-12) applied
to the part notes.
Chorus:
Chorus
Controls the level
of the chorus effect
000 to 127
(page E-13) applied
to the part notes.
Chord 1 Chord 2 Chord 3 Chord 4 Chord 5
7
8
9
bk
bl
bm
Example: When bass is selected
Instrument part name
5.
Edit the selected part as desired.
The table below describes the parameters you can edit.
• Use the dn (u) and do (i) buttons to select a
parameter, and the ct (w, q) buttons to change its
setting. You also can use shortcut buttons (see table
below) to select parameters.
• Pressing the ct (w, q) buttons at the same time
will return the currently selected parameter to its
initial default setting.
• Pressing the bs (START/STOP) button during an
edit operation will sound the accompaniment pattern
with the edits you have made up to that point.
Pressing the bt (ACCOMP ON/OFF) button will
sound only the instrument part you are editing.
Procedure continues on page E-23.
E-22
Shortcut
Button
Parameter
co
cp
*1 Replacing part accompaniment data clears all edits to the
currently selected accompaniment data made up to that
point.
*2 Sequential numbers starting from 001, which is the first
rhythm of the first group (POPS/DANCE/ROCK). See
the “Tone List” (page A-1) and “Rhythm List” (page A-5)
for information on the numbering system.
*3 In the case of the intro and ending, specifying a rhythm
for one part (drum, bass, etc.) will cause the same rhythm
to be specified automatically for all of the other parts of
the pattern.
*4 Only drum set sounds (tone numbers 237 through 250)
can be selected for drum parts and percussion parts.
Drum set sounds cannot be selected for the bass and the
chord 1 through chord 5 parts.
*5 A smaller value shifts leftward, while a larger value shifts
rightward. A value of zero specifies center.
Using Auto Accompaniment
7.
Repeat steps 3 through 5 to edit all of the
accompaniment patterns and parts you want.
After editing is complete, adjust the tempo of
the rhythm as desired.
• The tempo you set here becomes the initial default
tempo of the rhythm.
8.
Press the dm (EXIT) button.
10. Decide on the user rhythm number where you
want to save the rhythm and a rhythm name.
• Use the dn (u) and do (i) buttons to move the
cursor to the user rhythm number and rhythm name
character you want to change. Use the ct (w, q)
buttons to select the number or character you want.
• The rhythm name characters you can select are
shown below. To input a space, press both of the ct
(w and q) buttons at the same time.
This causes a confirmation message to appear asking if
you want to save your edits.
9.
Press the ct (YES) button.
This displays a screen for specifying the user rhythm
number and rhythm name.
• If you want to exit the editing operation without
saving, press the ct (NO) button instead of the ct
(YES) button.
11. Press the dp (ENTER) button.
This saves the data.
• If the rhythm number where you are saving the data
already has data saved to it, a message (Replace?) will
appear on the display to confirm whether you want
to replace the existing data with the new data.
IMPORTANT!
Rhythm name
Destination user rhythm number
• Saving user rhythm data to a user rhythm number
that already has data will cause the existing data to
be replaced by the new data.
NOTE
• If the size of the accompaniment pattern or
instrument part data is too large to be edited, a
memory full message (Memory Full) will appear on
the display. If that happens, select a different
accompaniment pattern or instrument part for
editing.
E-23
English
6.
Playing Demo Songs
bl bm
bn
bo bp bq br bs
bt
cs
ck
ct
dm dn do dp
ds
Playing Tone Demo Songs
Your Digital Piano comes with six built-in demo tunes,
which demonstrate the characteristics of each of the six
tone groups.
No.
Tone Group Name
Tune Name
001
GRAND PIANO
Original
002
ELEC PIANO
Original
003
ORGAN
Original
004
STRINGS
Nessun Dorma [Turandot]
005
VARIOUS
Original
006
GM TONES
Original
Song number
Current measure
Song name
1.
While holding down the bt (PART) button,
press the bs (PLAY/STOP) button.
This will start sequential playback of the demo songs,
starting from song 1.
Song tempo
• Pressing a tone group button (cm through cr) while
demo song playback is in progress will switch to the
demo song of that group’s tone. Also, you can scroll
through songs manually with the ct (w, q)
buttons.
2.
Press the bs (PLAY/STOP) button.
This stops demo song playback.
Playback of the demo songs will continue in an endless
loop until you press the bs (PLAY/STOP) button to
stop it.
NOTE
• Only the operations described above can be
performed while demo song playback is in progress.
E-24
Playing Demo Songs
4.
This starts playback of the song.
• Press the bq (FF) button to perform a fast forward
operation or the bp (REW) button for rewind.
Pressing and releasing either button moves one
measure, while holding down a button scrolls at high
speed.
• Pressing the br (PAUSE) button pauses playback.
Press again to resume song playback.
You can import song data from a commercially
available USB flash drive or computer as a user song,
and use it for Auto Accompaniment or for practice.
1.
Load the song data you want to listen to one
of the Digital Piano’s user songs.
Lights with each subsequent beat of each measure
Lights with the first beat of each measure
• See “Loading Data from a USB Flash Drive to Digital
Piano Memory” (page E-50) and “Connecting to a
Computer” (page E-54) for details about how to load
data.
• You also can play back data directly from a USB flash
drive without importing it into Digital Piano
memory. For details, see “Playing Back a Song on a
USB Flash Drive” (page E-52).
2.
Press the bn (USER SONGS) button so its
lamp is lit.
• Each press of the button toggles between the upper
and lower lamps.
Lit
3.
Use the ct (w, q) buttons to select the
user song you want.
Example: When user song 003 is selected
Press the bs (PLAY/STOP) button.
bo
bp
bq
Rewind
br
bs
Pause
Fast forward
5.
Press the bs (PLAY/STOP) button again.
This stops song playback.
• Song playback also will stop automatically when the
end of the song is reached. To configure the Digital
Piano to loop song playback without stopping, turn
on “Song Repeat” (page E-45).
Changing the Song Tempo
You can change the song tempo using the same
procedure that you use to adjust the metronome
tempo. For more information, see “Changing the
Tempo Setting” (page E-14).
Playing on the Keyboard Using the Same
Tone as the Song
1.
User song number
Song name
Hold down the bn (USER SONGS) button for
at least two seconds.
This will assign the same tone as the right hand part of
the current song to the keyboard.
NOTE
• You can use the procedure under “Practicing Either
Hand’s Part (Part Off)” (page E-26) to turn off the
left hand part and play along on the keyboard using
the left hand part tone.
E-25
English
Listening to Songs Loaded
from an External Source
Playing Demo Songs
Adjusting the Song Volume
You can use the following procedure to adjust the
volume level of the song’s Auto Accompaniment,
without affecting the volume of keyboard tone output.
For details, see “Song Volume” (page E-44).
Sounding a Count at the Beginning of a
Song
You can configure the Digital Piano to sound a count
before playback of a song starts, which helps to get the
timing right when you are playing along on the
keyboard. For details, see “Pre-count” (page E-45).
Practicing Either Hand’s Part (Part Off)
You can turn off the right hand part*1 or left hand
part*2 of a song and play that part on the Digital Piano
while the song plays back.
*1 Song data Channel 4 (fixed)
*2 Song data Channel 3 (fixed)
1.
Press the bt (PART) button.
Repeating Playback of a Specific Section
(Repeat)
You can configure the Digital Piano to repeat the
section of a song you want to practice. You could, for
example, specify repeat play from measure 5 to
measure 8.
Start
This causes “L-[ON] R-[ON]” to appear on the display.
2.
Use the ct (w, q) buttons to turn off the
part you want.
Press (w) to toggle the left hand part or (q) to toggle
the right hand part on and off.
3.
Press the bt (PART) button again.
This exits the part on/off screen.
4.
Hold down the bn (USER SONGS) button for
at least two seconds.
These measures are repeated.
1.
Press the bs (PLAY/STOP) button to start
song playback.
Press the bs (PLAY/STOP) button.
This starts playback of the song.
2.
• This will assign the same tone as the hand that is
turned off to the keyboard.
5.
End
When playback reaches the first measure of
the section you want to repeat, press the bo
(REPEAT) button.
This makes the measure the “start measure”.
The bo (REPEAT) button lamp flashes at this time.
3.
The part you turned off does not sound, so you can play
it on the keyboard.
When playback reaches the last measure of
the section you want to repeat, press the bo
(REPEAT) button again.
This makes the measure the “end measure”.
Repeat playback of the specified section starts as soon
as you select the end measure.
The bo (REPEAT) button lamp is lit (not flashing) at
this time.
4.
E-26
Pressing bo (REPEAT) again returns to
normal play.
This will cause the bo (REPEAT) button lamp to go out.
Playing Demo Songs
English
Playing Back Audio Data
Stored on a USB Flash Drive
You can use your Digital Piano to play back audio data
(WAV files*) stored on a commercially available USB
flash drive.
See “USB Flash Drive” on page E-47 for more
information.
* Linear PCM, 16bit, 44.1 kHz, Stereo
PREPARATION
• Prepare a USB flash drive that contains data
recorded to it using the Digital Piano’s Audio
Recorder. See “Recording to a USB Flash Drive
(Audio Recorder)” on page E-41 for more
information.
• You can also use a computer to save audio data
(WAV file) to the USB Flash Drive for playback. See
“Storing Standard Audio Data (WAV Files) to a USB
Flash Drive” on page E-48 for more information.
• Insert the USB flash drive that contains the data you
want to play back into your Digital Piano’s USB
flash drive port.
1.
Press the ds (AUDIO RECORDER) button.
• This will cause the button’s lamp to light.
2.
While holding down the cs (FUNCTION)
button, press the ds (AUDIO RECORDER)
button.
• This will display the audio file selection screen.
3.
Use the ct (w, q) buttons to select a song.
• The ct (q) button scrolls forward through the song
file names (WAV01, WAV02, etc.) The ct (w) button
scrolls backward through the song file names.
4.
5.
Press the dm (EXIT) button.
Press the bs (PLAY/STOP) button.
• This will start playback of the selected song.
6.
To stop a song, press the bs (PLAY/STOP)
button again.
• To exit the Audio Recorder, press the ds (AUDIO
RECORDER) button. This will cause the lamp above
the AUDIO RECORDER button to go out.
E-27
Music Presets
5 6 7 8 9 bk bl bm
bn
bp bq
bs
bt
cs
ck
Music Presets provide you with one-touch tone,
rhythm, chord, and other settings that are optimized
for specific musical genres and songs.
In addition to built-in presets, you can create your own
original Music Presets (user presets).
dl dm dn do dp
2.
•
•
•
•
•
•
•
•
Selecting a Music Preset
While holding down the cs (FUNCTION)
button, press the ck (MUSIC PRESET)
button.
This causes the bt (ACCOMP ON/OFF) lamp to flash
and the Music Preset screen to appear.
Music Preset number
Music Preset name
Use buttons dl to do (Music Preset group
buttons) to select a group, and then use the
ct (w, q) buttons to select the Music
Preset you want.
This will configure the Digital Piano with settings (tone,
rhythm, etc.) of the selected Music Preset.
The following are the settings that are included in a
Music Preset.
There are a total of 300 built-in Music Presets, which
are divided into three groups (1, 2, 3). A fourth group
(4) is provided for user presets.
• For more information, see the “Music Preset List”
(page A-7).
1.
3.
Tones (main, layer, lower split) (page E-9)
Layer balance (page E-9)
Octave shift (page E-11)
Reverb (page E-12)
Chorus (page E-13)
Rhythm (page E-21)
Tempo (page E-20)
Auto Harmonize (page E-20)
Press the bs (START/STOP) button to start
Auto Accompaniment with the chord
progression of the Music Preset. Play the
melody on the keyboard.
• The preset chord progression repeats until you stop it
by pressing the bs (START/STOP) button again.
• Pressing the bt (ACCOMP ON/OFF) button so the
ACCOMP ON/OFF lamp is lit (not flashing) or unlit
will turn off the chord progression of the Music
Preset and play the normal Auto Accompaniment
pattern.
Each press of the bt (ACCOMP ON/OFF) button
cycles in the sequence shown below.
Unlit
Lit
Normal Auto Accompaniment
E-28
ct
Flashing
Music Preset
chord progression
Music Presets
4.
4.
4-1. To edit the chord progression
Press the ct (w) button to display “CHORD”
and then press the dp (ENTER) button to
advance to the chord progression editing
screen.
Next, perform the editing operation described
under “To edit the chord progression” (page
E-30). After you finish the editing operation,
press the dm (EXIT) button to return to the
screen for selecting the type of editing
operation, above.
To exit a Music Preset, while holding down
the cs (FUNCTION) button, press ck (MUSIC
PRESET) button.
Creating an Original User
Preset
4-2. To edit Auto Accompaniment parameters
Press the ct (q) button to display
“Parameter” and then press the dp (ENTER)
button to advance to the Auto
Accompaniment parameter editing screen.
Next, perform the editing operation described
under “To edit Auto Accompaniment
parameters” (page E-32). After you finish the
editing operation, press the dm (EXIT) button
to return to the screen for selecting the type of
editing operation, above.
A Music Preset editor is provided to allow you to
create your own original Music Presets (user presets).
Up to 50 user presets can be stored in Music Preset
Group 4.
1.
Select the Music Preset you want to edit in
order to create your user preset.
2.
Change the tone number, rhythm number,
and other settings of the Music Preset as you
want.
• The settings you configure here will be saved as a
user Music Preset. See step 2 under “Selecting a
Music Preset” (page E-28) for the settings you can
configure and save for a user Music Preset.
3.
Press the cs (FUNCTION) and ck (RHYTHM
EDITOR) buttons at the same time.
This displays a screen for selecting the type of editing
operation you want to perform.
Editing operation type
Edit the Music Preset parameters.
5.
After editing everything you want, press the
dm (EXIT) button.
• This will display a message asking if you want to
save the user preset.
6.
Press the ct (YES) button.
This displays a screen for selecting the Music Preset
number and name for storing the edited data.
• If you do not want to save the edited data, press the
ct (NO) button in place of the ct (YES) button.
Music Preset name
Music Preset number for data storage
E-29
English
• To change the rhythm, use the 5 through bm (rhythm
group) buttons to select the rhythm group and then
use the ct (w, q) buttons to select a rhythm
number.
• To change the tone, use the cm through cr (tone
group) buttons to select the tone group and then use
the ct (w, q) buttons to select a tone number.
Music Presets
7.
8.
Use the ct (w, q) buttons to select the
Music Preset number where you want to
store the edited data.
Enter a name for the preset.
Use the dn (u) and do (i) buttons to move the cursor
to the character you want to change and then use the ct
■ To edit the chord progression
1.
On the editing operation selection screen
(page E-29), select “CHORD” and then press
the dp (ENTER) button to display the chord
progression editing screen shown below.
(w, q) buttons to change the character. The following
shows a table of available characters.
• To input a space, press both of the ct (w and q)
buttons at the same time.
(2) Cursor
9.
Press the dp (ENTER) button.
This saves the data.
• If the preset number where you are saving the data
already has data saved to it, a message (Replace?) will
appear on the display to confirm whether you want
to replace the existing data with the new data.
Press the ct (YES) button to overwrite or the ct (NO)
button to cancel the save operation.
(1) Step (timing and chord)
(3) Resolution
(1) Step (timing and chord)
The timing of a chord progression is expressed as a
series of three values separated by colons (such as
001:1:00) indicating measure*1 (001), beat (1), and
tick (00)*2. This series of three values is referred to
collectively as a “step”.
The screen shot above shows the first two steps
(001, 002) of the Music Preset. Use the bp (REW)
and bq (FF) buttons to scroll and view other steps.
*1 Up to 999 measures
*2 There are 12 ticks per beat, as shown below.
Chord progression
Measure 2
Measure 1
Beat 1
Beat 2
Beat 3
Tick 00 01 02
Beat 4
09 10 11
Beat 1
Beat 2
002:1:00
For the sample display
above, the chord change
from C to Bm occurs here.
001:1:00
(2) Cursor
Specifies the step that is currently selected for
editing.
(3) Resolution
Resolution is a unit used when editing step timing.
The initial resolution is R1 (one measure), but you
also can select R4 (1 beat = 1 quarter note) when you
want to specify chords for each beat. Use the
instrument part buttons (5 through bm) to select
one of the eight resolutions shown below.
5
6
7
8
9
bk
bl
bm
R1
R2
R4
R8
R8T
R16
R16T
R32T
3
(1 measure)
E-30
(2 beats)
(1 beat)
(1/2 beat)
(1/3 beat)
3
(1/4 beat)
(1/6 beat)
(1/12 beat)
Music Presets
3.
Use the bp (REW) and bq (FF) buttons to
move the cursor (2) on the chord progression
editing screen to the step you want to select.
4.
• You can playback the Music Preset you are currently
editing by pressing the bs (START/STOP) button.
• The table below describes other Music Preset editing
operations you can perform. Press the cs
(FUNCTION) button, use the dn (u) and do (i)
buttons to select the editing operation you want,
perform the required operation, and then press the dp
(ENTER) button to apply the edit and return to the
chord progression editing screen.
• To exit the editing operation and discard all of your
edits, press the dm (EXIT) button.
Change the content of the selected step as
desired.
3-1. Select a chord fingering mode and use the
chord keyboard (page E-19) to input chords.
Fingering a chord causes the cursor (2) to
move to the next step automatically.
• If you want to advance to the next step
without changing the current chord, press
the br (PAUSE) button.
• If (3) Resolution is shorter than the time up
to the next step, a new step (without chord)
that is equal to the time of the resolution
will be inserted temporarily into the Music
Preset. Fingering a chord for the new step
will cause the step to be registered as part
of the Music Preset, and the cursor will
advance to the next step.* You can use this
operation to insert a new step between the
current and following step.
* Using the bp (REW) and bq (FF) buttons to
move the cursor without inputting a chord
will delete the temporarily inserted step.
3-2. Use the ct (w, q) buttons to change the
step timing (measure:beat:tick).
Each press of either button changing the
timing in accordance with the resolution.
• The range of values you can specify for the
step timing is limited by the steps before
and after the current step.
• The timing of the first step (001:1:00) is
fixed and cannot be changed. Also, the final
step is always one measure, regardless of
the resolution.
Editing
Operation
(Display)
Description
1
Initialize
(Initialize)
Initializes all steps.
Initialization is useful
when you want to create
a totally new chord
progression from
scratch.
2
Change Key
(Change Key)
3
Append
Music Preset
(Append
Chords)
3-3. To delete a step, press both of the ct (w and
q) buttons at the same time.
• You cannot delete the first step or the last
step.
Operation
–
Changes the pitch (key)
of the chords in all of the
steps in semitone units.
Use the ct (w, q)
buttons to select the
amount of change
you want (–5 to 6
semitones).
Copies all of the steps of
another Music Preset to
the end of the current
Music Preset.
Use the ct (w, q)
buttons to select the
number∗ of the
Music Preset you
want to add.
4
Delete
Measures
(DELETE
Measure)
Deletes a specified
number of measures
from the current cursor
step forward.
Use the ct (w, q)
buttons to select the
measures.
5
Insert
Measure
(INSERT
1Measure)
Inserts a blank measure
at the currently selected
step.
–
* The Music Presets in groups 2, 3, and 4 are
numbered sequentially, following the numbers in
group 1, which start with 1. For details about
sequential numbers, see the “Music Preset List” on
page A-7.
5.
Last step
Repeat the above steps to edit all of the steps
you want.
After all editing operations are complete,
press the dm (EXIT) button to return to the
editing operation selection screen (page
E-29).
NOTE
• A single preset can contain up to approximately
2,000 chords. If your edits cause the chord limit to be
exceeded, the message “Memory Full” will appear
on the display and further editing will become
impossible.
E-31
English
2.
Music Presets
■ To edit Auto Accompaniment parameters
1.
On the editing operation selection screen (page E-29), select “Parameter” and then press the dp
(ENTER) button to display the Auto Accompaniment parameter editing screen shown below.
Setting
2.
Parameter
Use the dn (u) and do (i) buttons to select a parameter, and the ct (w, q) buttons to change its
setting.
Parameter
Description
Setting
1
SYNCHRO TYPE:
Synchro type
Selects the synchro standby status and type
when the Music Preset is selected.
0 Off: Off (no standby)
1 Normal: From standby to normal pattern
2 Variation: From standby to variation pattern
3 Intro: From standby to intro pattern
2
DRUM ON/OFF:
Drum on/off
Toggles the drum part (page E-22) on or off.
OFF: Mutes the part.
ON: Sounds the part.
3
PERC ON/OFF:
Percussion on/off
Toggles the percussion part (page E-22) on or
off.
OFF: Mutes the part.
ON: Sounds the part.
4
BASS ON/OFF:
Bass on/off
Toggles the bass part (page E-22) on or off.
OFF: Mutes the part.
ON: Sounds the part.
Toggles the Chord 1 through 5 parts (page
E-22) on or off.
OFF: Mutes the parts.
ON: Sounds the parts.
CHORD1 - 5
5 - 9 ON/OFF:
Chord 1 - 5 on/off
10
INTRO CHORD:
Intro chord
Selects from among major (× 12 keys) and
minor (× 12 keys) for the intro chords.
C - B: Major (C to B)
Cm - Bm: Minor (Cm to Bm)
11
ENDING CHORD:
Ending chord
Selects from among major (× 12 keys) and
minor (× 12 keys) for the ending chords.
C - B: Major (C to B)
Cm - Bm: Minor (Cm to Bm)
12
AUTO FILL-IN:
Auto fill in on/off
Specifies whether or not a fill-in should be
inserted into the final measure of a chord
progression.
OFF: Fill-in not inserted
ON: Fill in inserted
TIMING SET:
Chord progression
variation
1 Normal: Edited chord progression proceeds
as-is.
This parameter lets you add different
2 Half: Halves chord timing within a measure.
variations to the timing of the chord
3 Double: Doubles chord timing within a
progression being edited. You can use it to
measure.
match the chord progression to the beat of a
4 3/4: Multiplies chord timing within a measure
specific rhythm.
by 3/4. Select this setting to match to a
• A chord (step) that is outside of the rhythm’s
6/8 time rhythm.
beat is cut off.
5 6/4: Multiplies chord timing within a measure
by 3/2. Select this setting to match to a
6/4 time rhythm.
13
3.
E-32
After all editing operations are complete, press the dm (EXIT) button to return to the editing operation
selection screen (page E-29).
English
Registering Tone and Rhythm Setups
dk dl dm dn do dp
Registration memory lets you store Digital Piano
setups (tone, rhythm, etc.) for instant recall whenever
you need them. Registration memory simplifies
performance of complex pieces that require successive
tone and rhythm changes.
You can have up to 96 setups in Registration memory
at one time. The dk (BANK) button and dl
(REGISTRATION 1) to do (REGISTRATION 4)
buttons are used for recording.
dk
dl
dm
dn
do
Area 1
Area 2
Area 3
Area 4
Bank 1
Setup 1-1
Setup 1-2
Setup 1-3
Setup 1-4
Bank 2
Setup 2-1
Setup 2-2
Setup 2-3
Setup 2-4
.
.
.
.
.
.
.
.
.
.
Bank 24
Setup 24-1 Setup 24-2 Setup 24-3 Setup 24-4
■ Registration Data Types
z
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Tone Settings
Tone numbers (main, layer, split)
Layer on/off
Layer balance
Split on/off
Split point
Octave shift
Brightness
Reverb
Chorus
Transpose
Touch response
Soft/sostenuto pedal setting
Damper pedal adjustment
Pitch bend range
z Auto Accompaniment Settings (Areas 1 through 4
only)
• Rhythm number
• Accomp on/off
• Chord fingering mode
• Synchro standby
• Tempo
• Auto Accompaniment volume
• Auto harmonize
• Each press of the dk (BANK) button cycles through
the bank numbers, from 1 to 24.
• Pressing a button from the dl to do buttons selects
the corresponding area in the currently selected
bank.
Setup 8-2 data
Tone Settings
Keyboard Tone: 014 Harpsichord
Brightness: 2
Reverb: 1 Room
Chorus: Off
·
·
Auto Accompaniment Settings
Rhythm: 005 Pop Rock
Tempo: 180
Accompaniment Volume: 20
·
·
E-33
Registering Tone and Rhythm Setups
Saving Registration Data
Recalling a Registration
1.
Configure the Digital Piano with the tone,
rhythm, and other settings you want to save.
2.
Press the dk (BANK) button to select the
bank where you want to save the registration.
1.
Press the dk (BANK) button to select the
bank that contains the setup you want to
recall.
2.
Use the buttons dl to do to select the area
whose setup you want to recall.
Example: Bank 4
3.
Next, hold down the dp (STORE) button as
you use the dl through do buttons to select
an area.
The data will be saved to the bank and area you specify.
dl
dm
dn
do
dp
This will recall the registration memory setup and
automatically configure the Digital Piano settings
accordingly.
Example: When recalling the registration data in Bank
4, Area 1
Example: Bank 4, Area 1
■ Saving registration Data on an External
Device
Area
E-34
See “Connecting to a Computer” (page E-54) for details
about how to transfer sampled data to a computer for
storage.
4
cs
bo bp bq br bs
You can use the Song Recorder to record what you play
on the Digital Piano to built-in song memory. You can
divide a song into parts (by instrument, by left hand
and right hand, etc.) and record each part separately.
You can even use “punch-in recording” to edit specific
parts of existing recordings.
When a commercially available USB flash drive is
inserted in the Digital Piano’s USB flash drive port,
audio data is recorded to and played back from the
USB flash drive (Audio Recorder).
Recording to Built-in Song
Memory (Song Recorder)
3.
Song Recorder Off
Unlit
Song Recorder On
Lit: Playback mode
Flashing: Record mode
Configure the tone, rhythm, and other
settings you want to use.
Play something on the keyboard.
Recording starts as soon as you play something.
• If Auto Accompaniment is playing, it will be
included in the recorded data.
4.
When you are finished, press the bs (START/
STOP) button.
This will cause the 4 (SONG RECORDER) lamp to
flash and then light, indicating the playback mode.
• If you are using Auto Accompaniment, you also can
end the recording session by pressing the br
(ENDING) button.
Press the 4 (SONG RECORDER) button
twice so its lamp is flashing.
This turns on the Song Recorder and enters the record
mode.
• Each press of the 4 (SONG RECORDER) button
cycles through modes as shown below.
ds
• The settings you configure here will be included as
part of the recorded song data.
• For details about what is included in the recorded
song data, see “System Track” (page E-37).
The following are the steps for recording or playing
back a single recorder memory song.
1.
ct
dm dn do dp
2.
English
Recording Your Keyboard Play
Lit: Playback mode
5.
To play back what you have recorded, press
bs (START/STOP) again.
• Each press of bs starts and stops playback.
E-35
Recording Your Keyboard Play
6.
To exit the Song Recorder, press the 4
(SONG RECORDER) button again so its
lamp goes out.
Unlit: Song Recorder off
Recording or Playing Back
Multiple Songs
You can record up to five songs (numbered 1 through
5) in memory. After that, you can select a specific song
for playback.
1.
NOTE
• Recorder memory capacity is approximately 10,000
notes per song. When remaining capacity is 100
notes or less, the 4 (SONG RECORDER) button
lamp will flash at high speed. Recording will stop
automatically when memory becomes full.
• Repeat, fast reverse, fast forward, pause, and tempo
adjustment during playback are the same as when
playing back user songs. See “Listening to Songs
Loaded from an External Source” (page E-25) for
more information.
• You can listen to the song data currently stored in
recorder memory at any time by pressing the
4 (SONG RECORDER) button to enter the
playback mode and then pressing bs (START/
STOP).
Use the 4 (SONG RECORDER) button to
cycle through the Song Recorder modes until
the lamp above the SONG RECORDER
button is lit. This is the Song Recorder
playback mode.
Lit: Playback mode
2.
While holding down the cs (FUNCTION)
button, press the 4 (SONG RECORDER)
button.
This displays the song selection screen.
IMPORTANT!
• A new recording replaces (deletes) previously
recorded contents.
• If power to the Digital Piano is cut off while recording
is in progress, everything you recorded up to that
point will be deleted. Take care so power is not
turned off accidentally during recording operations.
E-36
3.
Use the ct (w, q) buttons to select the
song number you want.
4.
Press the dm (EXIT) button to exit the song
selection screen.
5.
To record to the currently selected song,
press the 4 (SONG RECORDER) button. To
play back the currently selected song, press
the bs (START/STOP) button.
6.
If you are recording, continue from step 2
under “Recording to Built-in Song Memory
(Song Recorder)” (page E-35).
Recording Your Keyboard Play
■ Supported Track Data
The following describes the data that can be recorded
to each type of track.
You can record specific instruments, the left hand and
right hand, or other parts of a song individually, and
then combine them into a final song.
System Track, Tracks 01 through 16
Keyboard notes, keyboard tone setting (main), pedal
and pitch bend wheel operation
■ What is a track?
System Track only
Layer, split, octave shift, reverb, chorus, tempo, Auto
Accompaniment play, auto harmonize, one-touch
preset, Music Preset*1, registration*1*2
A “track” is a separate recorded part of a song. The
Song Recorder of this Digital Piano has a total of 17
tracks, one of which is a system track as described
below.
z System Track
In addition to notes you play on the keyboard and
other performance operation data, the system track
also includes a wide range of setup information for
the song, including layer on/off, split on/off, tempo,
Auto Accompaniment settings, reverb on/off, etc.
When you record a single-track song to recorder
memory, as shown under “Recording to Built-in
Song Memory (Song Recorder)” (page E-35) and
“Recording or Playing Back Multiple Songs” (page
E-36), everything is recorded to the system track.
*1 Recall only
*2 The Auto Accompaniment volume level and
transpose setting of the recalled data is not included
in the recording.
1.
Record the first part to the system track.
• Use the procedure under “Recording to Built-in Song
Memory (Song Recorder)” (page E-35) or “Recording
or Playing Back Multiple Songs” (page E-36) to
record to the system track.
2.
z Tracks 01 through 16
These tracks can be used to record notes, as well as
pitch bend wheel and pedal operations, and the
keyboard tone setting. These tracks can be combined
with the system track and each other to create the
final song.
Use the 4 (SONG RECORDER) button to
cycle through the Song Recorder modes until
the lamp above the SONG RECORDER
button is flashing. This is the Song Recorder
record mode.
Flashing: Record mode
3.
While holding down the cs (FUNCTION)
button, press the 4 (SONG RECORDER)
button.
This displays the track selection screen.
Use the ct (w, q) button to select the track you want
to record next (T01 through T16).
After selecting a track, press the dm (EXIT) button to
exit the track selection screen.
B
Track Name
Display
System Track
Sys
Tracks 01 through 16
T01 through T16
E-37
English
Recording to a Specific Track
(Part)
Recording Your Keyboard Play
4.
Select the tone of the part you want to record
to the track.
5.
Press the bs (START/STOP) button.
This will start playback of what you recorded to the
system track and start recording to the currently
selected track. Play what you want to record to the
current track along with the playback from the system
track.
6.
To stop recording, press the bs (START/
STOP) button again.
This enters the playback mode. Press the bs (START/
Deleting Data Recorded with
the Song Recorder
Performance data recorded with the Song Recorder can
be deleted song-by-song. You also can delete a
particular track from a song.
Deleting a Recorder Song
1.
STOP) button again to play back the track you just
recorded. Each press of bs (START/STOP) starts and
stops playback.
• You can use the following procedure to turn specific
tracks on (play enabled) and off (play disabled). This
allows you to listen only to the track(s) you want
when recording a new track.
(1) While holding down the cs (FUNCTION)
button, press the 4 (SONG RECORDER)
button.
This displays the song selection screen.
(2) Press the do (i) button once.
This displays the track on/off screen.
(3) Use the ct (w, q) buttons to select the track
you want, and then press the dp (ENTER) button
to toggle it on or off.
7.
Repeat steps 2 through 6 as required to
record all of the tracks you want.
Use the 4 (SONG RECORDER) button to
cycle through the Song Recorder modes until
the lamp above the SONG RECORDER
button is lit. This is the Song Recorder
playback mode.
Lit: Playback mode
2.
While holding down the cs (FUNCTION)
button, press the 4 (SONG RECORDER)
button.
This displays the recorder song selection screen.
3.
Use the ct (w, q) buttons to select the
recorder song you want to delete.
4.
Hold down the 4 (SONG RECORDER)
button until the message “Sure?” appears on
the display.
5.
Press the ct (YES) button to delete the
recorder song.
• To cancel the delete operation, press the ct (NO)
button.
E-38
Recording Your Keyboard Play
Deleting a Particular Track
2.
Press the bs (START/STOP) button.
This will start playback of the selected track.
Perform steps 1 through 3 of the procedure
under “Deleting a Recorder Song” to select
the recorder song that contains the track you
want to delete.
4.
This automatically starts punch-in recording, which
will continue until step 5, below.
• Any one of the following also will start punch-in
recording: a pedal or pitch bend wheel operation;
pressing the 4 (SONG RECORDER) button;*1
changing the tone setting; changing the rhythm, or
tempo setting*2
*1 Press 4 (SONG RECORDER) when you want to
start punch-in recording without note input or a
setting change.
*2 System track only
• You can perform bp (REW), bq (FF), and br (PAUSE)
button operations during punch-in playback to jump
more quickly to the section you want to re-record.
Press the do (i) button.
This displays the track selection screen.
3.
Use the ct (w, q) buttons to select the
track you want to delete.
4.
Hold down the 4 (SONG RECORDER)
button until the message “Sure?” appears on
the display.
5.
Press the ct (YES) button to delete the track.
• To cancel the delete operation, press the ct (NO)
button.
Re-recording Part of a
Recorder Song
(Punch-in Recording)
You can use punch-in recording to re-record a specific
part of recorder song that you want to improve or
correct.
Mistake
When playback reaches the point you want to
re-record, play the notes and perform the
other operations you want.
5.
To stop punch-in recording, press the bs
(START/STOP) button again.
Anything in the track following the point where you
pressed the bs (START/STOP) button will be retained
as-is.
• If you want to delete all of the data in the track
following the section you re-recorded with punch-in
recording, press the 4 (SONG RECORDER) button
in place of the bs (START/STOP) button above.
• If you want to cancel punch-in recording and retain
the original (unedited) track data, hold down the 4
(SONG RECORDER) button until the display exits
the punch-in recording screen.
Playback
Use punch-in
recording to re-record
only this part.
1.
Enter the Song Recorder record mode and
select the track that contains the section you
want to re-record.
• See step 3 under “Recording to a Specific Track
(Part)” (page E-37).
2.
Hold down the 4 (SONG RECORDER)
button until the punch-in recording screen
appears on the display.
E-39
English
1.
3.
Recording Your Keyboard Play
Specifying the Punch-in Recording
Location (Auto Punch-in Recording)
You can use the following procedure to specify a
particular range for punch-in recording.
Start measure
End measure
■ Performing Punch-in Recording for Areas
Smaller than One Measure
Use the procedure below to specify a punch-in
recording area that includes a part of a measure.
Example: To re-record from beat 3 of measure 2 up to beat
1 of measure 4
Punch-in recording range
To re-record this section
1.
Enter the Song Recorder record mode.
• While holding down the cs (FUNCTION) button,
press the 4 (SONG RECORDER) button. This will
1.
Start playback of the song that contains the
section you want to re-record.
display the recording setup screen.
2.
Use the dn (u) and do (i) buttons to display
“AutoPu.IN”, and then use the ct (w, q)
buttons to select the start measure.
2.
When playback reaches the beginning of the
section you want to re-record, press the bo
(REPEAT) button.
3.
Use the dn (u) and do (i) buttons to
display “AutoPu.OUT”, and then use the ct
(w, q) buttons to select the end measure.
3.
When playback reaches the end of the
section you want to re-record, press the bo
(REPEAT) button again.
4.
Press the bs (START/STOP) button to stop
playback.
5.
Enter the Song Recorder record mode and
select the track that contains the section you
want to re-record.
• After selecting the start and end measures, press the
dm (EXIT) button to exit the recording setup screen.
4.
Select the track that contains the range of
measures you want to re-record.
• See step 3 under “Re-recording Part of a Recorder
Song (Punch-in Recording)” (page E-39).
5.
Press the ct (q) button to turn on auto
punch-in recording.
6.
Press the bs (START/STOP) button to start
playback.
• Punch in recording will start from the start measure
and stop with the end measure automatically.
• Play the notes and perform the other operations you
want.
• For information about selecting a track, see step 3
under “Recording to a Specific Track (Part)” (page
E-37).
6.
Hold down the 4 (SONG RECORDER)
button until the punch-in recording screen
appears on the display.
7.
Press the ct (q) button to turn on auto
punch-in recording.
8.
Press the bo (REPEAT) button to turn on
repeat.
9.
Press the bs (START/STOP) button.
This starts punch-in playback from the measure before
the location (start point) you specified in step 2, above.
• Punch-in recording starts automatically when
playback reaches the start point and ends
automatically when it reaches the location you
specified in step 3 (end point).
E-40
Recording to a USB Flash
Drive (Audio Recorder)
2.
Anything played on the Digital Piano is recorded to the
USB flash drive as audio data (WAV files*). If you play
along on the Digital Piano as you play back data stored
in song memory, the memory playback and your
keyboard play are both recorded to USB flash drive.
* Linear PCM, 16bit, 44.1 kHz, Stereo
Press the ds (AUDIO RECORDER) button as
many times as necessary until its lamp starts
to flash (which indicates audio recording
standby).
• The first press of the ds (AUDIO RECORDER)
button may cause the message “Media Mounting” to
appear on the Digital Piano display. If this happens,
wait until the display returns to normal. After that,
press the ds (AUDIO RECORDER) button again
until its lamp starts to flash.
Recording Capacity
• 99 files (No. 01 to No. 99)
• Approximately 25 minutes maximum recording per
file
Recorded Data
3.
• This will start recording to the USB flash drive. The
message “A.Rec Start” will appear on the display a
few seconds after recording starts.
• Anything played on the Digital Piano is recorded.
• Individual part recording is not supported.
Recording Data Storage
Each new recording of audio data to a USB flash drive
is automatically assigned a new file name, so existing
data is not overwritten.
Recording Digital Piano Play
(Audio Recorder)
NOTE
• Do not remove the USB flash drive from the USB
flash drive port while the AUDIO RECORDER
button lamp is lit or flashing. Doing so will interrupt
recording and may corrupt data.
4.
• Be sure to format the USB flash drive on the Digital
Piano before using it. See “USB Flash Drive” on page
E-47 for more information.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
• When you perform a USB flash drive operation or
turn on the Digital Piano while a USB flash drive is
plugged in, the Digital Piano initially needs to
perform a “mounting” sequence to prepare for data
exchange with the USB flash drive. Digital Piano
operations are momentarily disabled while a
mounting sequence is being performed. While the
mounting process is in progress, the message “Media
Mounting” will be displayed or “*****” will flash on
the display. It may take up to 10 or 20 seconds or even
longer for a USB flash drive to be mounted. Do not
attempt to perform any operation on the Digital
Piano while a mounting sequence is in progress. A
USB flash drive needs to be mounted each time it is
connected to the Digital Piano.
B
To stop recording, press the ds (AUDIO
RECORDER) button.
• The AUDIO RECORDER button lamp will flash for
a short while after you press it, and then it will stop
flashing and remain lit to let you know that audio
recording is complete. Do not perform the operations
below while the AUDIO RECORDER button lamp is
flashing.
• At this time, you can press the bs (PLAY/STOP)
button to replay what you have just recorded. To stop
playback, press the bs (PLAY/STOP) button.
• To continue with audio recording, press the ds
(AUDIO RECORDER) button so its lamp flashes. To
exit audio recording, press the ds (AUDIO
RECORDER) button twice so its lamp goes out.
PREPARATION
1.
Start playing something on the keyboard.
Recording Digital Piano Play as Data
Recorded in Song Memory Plays Back
(Audio Recorder)
1.
Press the 4 (SONG RECORDER) button.
• This causes the SONG RECORDER button lamp to
light.
E-41
English
Recording Your Keyboard Play
Recording Your Keyboard Play
2.
Press the ds (AUDIO RECORDER) button as
many times as necessary until its lamp starts
to flash (which indicates audio recording
standby).
• The first press of the ds (AUDIO RECORDER)
4.
5.
6.
button may cause the message “Media Mounting” to
appear on the Digital Piano display. If this happens,
wait until the display returns to normal. After that,
press the ds (AUDIO RECORDER) button again
until its lamp starts to flash.
Press the dm (EXIT) button.
Press the bs (PLAY/STOP) button.
To stop a song, press the bs (PLAY/STOP)
button again.
• To exit the Audio Recorder, press the ds (AUDIO
RECORDER) button. This will cause the lamp above
the AUDIO RECORDER button to go out.
Deleting an Audio File from a USB Flash
Drive
Files can be deleted one at a time.
IMPORTANT!
3.
Press the bs (PLAY/STOP) button.
• This will start playback of the current song memory
contents. Play along on the Digital Piano.
4.
To stop recording, press the ds (AUDIO
RECORDER) button.
• The AUDIO RECORDER button lamp will flash for
a short while after you press it, and then it will stop
flashing and remain lit to let you know that audio
recording is complete. Do not perform the operations
below while the button is flashing.
• To continue with audio recording, press the ds
(AUDIO RECORDER) button so its lamp flashes. To
exit audio recording, press the ds (AUDIO
RECORDER) button twice so its lamp goes out.
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in Digital Piano memory before you
perform the following steps.
1.
• This will cause the AUDIO RECORDER button lamp
to light.
2.
3.
Use the ct (w, q) buttons to select the
song you want to delete.
• The ct (w) button scrolls through the recorded
songs in order from the newest (most recently
recorded) to the oldest.
• The ct (q) button scrolls from the old to the new.
Press the ds (AUDIO RECORDER) button.
• The above step is not necessary if you want to play
back recorded data immediately after recording it
(because the AUDIO RECORDER button lamp is
already lit).
• This causes the AUDIO RECORDER button lamp to
light.
While holding down the cs (FUNCTION)
button, press the ds (AUDIO RECORDER)
button.
This will display the audio file selection screen.
Playing Back Data Recorded on a USB
Flash Drive
1.
Press the ds (AUDIO RECORDER) button.
4.
Hold down the ds (AUDIO RECORDER)
button until the message “Sure?” appears on
the display.
5.
To delete the data, press the ct (YES)
button.
This will delete the Audio Recorder data you selected.
• To cancel the delete operation, press the ct (NO)
button.
2.
While holding down the cs (FUNCTION)
button, press the ds (AUDIO RECORDER)
button.
This will display the audio file selection screen.
3.
NOTE
• The file number of file you delete remains unused.
Recording a new file will cause the file number that
comes after the last file recorded to the USB flash
drive.
Use the ct (w, q) buttons to select a song.
• The ct (w) button scrolls through the recorded
songs in order from the newest (most recently
recorded) to the oldest.
• The ct (q) button scrolls from the old to the new.
E-42
B
cs
English
Other Settings
ct
dn do
You can use the settings in this section to adjust the
tuning and touch of the keyboard, to configure pedal
and MIDI settings, and to configure other parameters
in order to tailor Digital Piano operation to your
particular needs.
Configuring Settings
1.
Press the cs (FUNCTION) button.
The FUNCTION lamp will light and the function screen
will appear on the display. (See table below.)
Parameter or group
2.
NOTE
• Holding down the cs (FUNCTION) button while
you press the ct (w, q) buttons in step 3 will
scroll the setting in steps of 10.
• You also can use the cs (FUNCTION) button for
faster scrolling while changing the tone number,
rhythm number, and other scrollable settings.
• Keep the cs (FUNCTION) button depressed
while pressing a ct (w, q) button for highspeed scrolling. Releasing the cs (FUNCTION)
button first can result in another unintended
setting being changed.
Setting
Use the dn (u) and do (i) buttons to select
one of the parameters (1 through 8) shown in
the table below.
• Parameters 4 through 8 actually are parameter
groups. After selecting a group, press the dp
(ENTER) button, and then use buttons dn (u) and do
(i) to select the parameter you want.
• Short cut buttons also are available for accessing a
parameter directly after you press the cs
(FUNCTION) button, without going through the
menu. See the “Shortcut Button” column in the table
below for the applicable shortcut button of each
parameter.
3.
Use the ct (w, q) buttons to change the
setting of the currently selected parameter.
• To return to the function screen, press the dm (EXIT)
or cs (FUNCTION) button.
E-43
Other Settings
No.
Parameter
Display
Name
Description
Settings
Shortcut
Button*
1
Keyboard Key (Transpose)
Transpose
Adjusts keyboard tuning by semitone
units.
–12 to 00 to 12
semitones
cm
2
Keyboard Fine Tuning
(Tuning)
Tune
Raises or lowers the overall pitch of
the Digital Piano in 0.1 Hz steps from
the standard pitch of A4 = 440.0 Hz.
415.5 Hz to 440.0 Hz to
465.9 Hz
cn
Keyboard Touch (Touch
Response)
Touch
Adjusts keyboard touch.
Off: Off
1: Strong sound even
with light pressure
2: Normal
3: Normal sound even
with strong pressure
3
4
Volume Level Group
4-1
5
co
cp
Volume
Layered Tone Volume LayerBal.
(Layer Balance)
Adjusts the volume level of the layered –24 to 00 to 24
tone without changing the keyboard
main tone.
4-2
Auto Accompaniment AccompVol.
Volume
Adjusts the volume level of Auto
00 to 42
Accompaniment without changing the
keyboard tone volume level.
cs – bn*
4-3
Song Volume
SongVol.
Adjusts the volume level of user song
playback without changing the
keyboard tone volume level.
00 to 42
cs – bn*
4-4
Metronome Volume
MetroVol.
See page E-14.
00 to 42
Changes the temperament of the
keyboard and Auto Accompaniment
from the standard equal temperament
to another tuning more suitable for
playing classics, etc.
Pressing a keyboard key while the
temperament screen is displayed will
make the pressed key the base note of
the temperament.
<Temperaments>
00: Equal / 01: Pure Major /
02: Pure Minor /
03: Pythagorean /
04: Kirnberger 3 /
05: Werckmeister /
06: Mean-Tone / 07: Rast /
08: Bayati / 09: Hijaz /
10: Saba / 11: Dashti /
12: Chahargah /
13: Segah /
14: Gurjari Todi /
15: Chandrakauns /
16: Charukeshi
Temperament/Effect Group Tmpr/Effect
5-1
Temperament
Temper.
–
cs – 3*
cq
–
<Base notes>
C to B (12 types)
5-2
5-3
*
Accompaniment
Temperament
Stretch Tuning
AccompTmpr
Stretch
Turn this setting off to play Auto
Accompaniment patterns using
standard equal temperament (00:
Equal), regardless of the temperament
setting currently selected with the
Temperament parameter (5-1).
Off, On
Sharpens high notes and flattens low
notes to achieve stretch tuning. Turn
off this setting to play with normal
(non-stretch) tuning.
Off, On
–
5-4
Brilliance
Brilliance
See page E-12.
–3 to 0 to 3
5-5
Octave Shift
OctShift
See page E-11.
U1 : –2 to 0 to 2
U2 : –2 to 0 to 2
L1 : –2 to 0 to 2
cs – cm*
5-6
Duet Mode
Duet
See page E-15.
Off, On
cs – dq*
cs – bn in this column means, “While holding down cs, press bn.”
E-44
–
–
Other Settings
6
Parameter
Song Playback/
USB Flash Drive Group
Play/Media
6-1
PreCount
6-2
7
Pre-count
Song Repeat
SongRepeat
Description
Settings
Turn on this setting for an audible
count before starting playback of a
user song or a song on a USB flash
drive.
Off, On
Turn on this setting to repeat play a
user song or a song on a USB flash
drive.
Off, On
–
cs – bo*
USB Flash Drive
Format
MediaFormat
See page E-49.
–
6-4
USB Flash Drive File
Delete
FileDelete
See page E-51.
–
6-5
USB Flash Drive File
Rename
FileRename
See page E-51.
–
MIDI Group
MIDI
7-1
KeyboardCh
7-3
7-4
Keyboard Channel
Accomp MIDI Out
MIDI In Chord Judge
Local Control
AccompOut
ChordJudge
LocalCtrl
Shortcut
Button*
ds
6-3
7-2
*
Display
Name
–
–
–
cr
Selects the keyboard channel, which is
the channel used to send MIDI data
corresponding to Digital Piano
keyboard play to an external device.
01 to 16
–
Turn on this setting to send MIDI data Off, On
corresponding to Auto
Accompaniment to an external device.
–
Select whether chord input should be Off, On
performed when an Auto
Accompaniment chord keyboard MIDI
note on message is received.
–
Turn off this setting to have keyboard
notes sent to an external device
without being sounded by the Digital
Piano.
–
Off, On
cs – bn in this column means, “While holding down cs, press bn.”
E-45
English
No.
Other Settings
No.
8
Parameter
Description
Settings
General
8-1
Display Contrast
Contrast
Adjusts the contrast of the Digital
Piano’s display.
00 to 26
8-2
Panel Lock
PanelLock
Turn on to lock the Digital Piano’s
control panel to prevent unauthorized
or accidental operation.
• This setting is disabled in the Duet
Mode, while the recorder is on, or
while Auto Accompaniment, a song,
or the metronome is playing.
Off, On
Setting Backup
BackUp
Switching this setting from off to on
Off, On
will save various Digital Piano settings
in effect at that time, and restore them
the next time the Digital Piano is
turned on.
• This operation is disabled in the
Duet Mode, while the recorder is on,
or while Auto Accompaniment, a
song, or the metronome is playing.
Auto Power Off
AutoPower
Specifies if Auto Power Off (page E-5)
is enabled (on) or disabled (oFF). Even
when “on” is selected for this setting,
you can temporarily disable Auto
Power Off by holding down the cs
(FUNCTION) button as you press the
1 (P) button to turn on the Digital
Piano.
Off, On
8-5
Soft/Sostenuto Pedal
Jack Setting
Ped.Assign
Specifies whether the pedal unit
connected to the SOFT/SOSTENUTO
jack is a soft pedal or a sostenuto
pedal.
• See page E-15 for details about the
two pedal types.
SFT : Soft pedal
SOS : Sostenuto pedal
Adjusts the amount of the pedal effect
applied when the damper pedal is
pressed part way.
00 to 42
Specifies the amount of pitch bend
applied when the pitch bend wheel is
rotated all the way up or down.
00 to 12 semitones
8-7
Half Pedal Effect
Pitch Bend Range
HalfPedal
BendRange
–
–
8-4
8-6
Shortcut
Button*
dk
Other Parameters Group
8-3
*
Display
Name
–
–
–
–
cs – bn in this column means, “While holding down cs, press bn.”
E-46
B
cs
bs
bt
Your Digital Piano supports the following USB flash
drive operations.
z USB flash drive formatting
z Data storage to a USB flash drive
• Song data recorded with the Digital Piano’s song
recorder is on a USB flash drive as MIDI files
(SMF format 0).
• Standard audio data from a computer (WAV files)
can also be stored on a USB flash drive and
played back on the Digital Piano.
• Digital Piano play can be recorded directly to a
USB flash drive.
For details, see “Recording to a USB Flash Drive
(Audio Recorder)” (page E-41).
• Storage of edited Auto Accompaniment data on a
USB flash drive
z USB flash drive data loading to Digital Piano
memory
• MIDI files and CASIO format files stored on a
USB flash drive can be loaded into the Digital
Piano as user songs (page E-25).
z Delete data from a USB flash drive
z Easy play back of song data from a USB flash drive
dn do dp
English
USB Flash Drive
ct
ds
■ Types of Data
Supported
Operations
Data Type
Description
(File Name Extension)
User
rhythms
(page E-21)
User songs
(page E-25)
Save to
USB
Flash
Drive
Load
from USB
Flash
Drive
Auto Accompaniment
data edited with this
Digital Piano (AC7)
O
O
One of the following two
types of music data
1. CASIO format data
(CM2)
2. Standard MIDI files
(MID)
SMF Format 0 or
Format 1
–
O
User Music
Presets
(page E-29)
Music Preset data edited
on this Digital Piano
(MPS)
O
O
Recorder
songs
(page E-35)
Song data recorded on
this Digital Piano (CSR)
O*
O
Registration Tone and rhythm setup
(page E-33) settings (CR6)
O
O
* Can be saved as a standard MIDI file (SMF format 0).
E-47
USB Flash Drive
Storing Standard Audio Data
(WAV Files) to a USB Flash
Drive
Performing a record operation with the Digital Piano’s
audio recorder creates a folder named AUDIO on the
USB flash drive. WAV files are stored in the AUDIO
folder, automatically assigning them names from
TAKE01.WAV to TAKE99.WAV. You also can connect
a USB flash drive to a computer and change the names
of audio data (WAV) files to the format
“TAKEXX*.WAV”, and move them to the AUDIO
folder. Then you will be able to play them back on the
Digital Piano.
* XX = 01 to 99
USB Flash Drive and USB Flash Drive
Port Handling Precautions
IMPORTANT!
• Be sure to observe the precautions provided in the
documentation that comes with the USB flash drive.
• Avoid using a USB flash drive under the following
conditions. Such conditions can corrupt data stored
on the USB flash drive.
• Areas subjected to high temperature, high
humidity, or corrosive gas
• Areas subjected to strong electrostatic charge and
digital noise
• Never remove the USB flash drive while data is
being written to or loaded from it. Doing so can
corrupt the data on the USB flash drive and damage
the USB flash drive port.
• Never insert anything besides a USB flash drive into
the USB flash drive port. Doing so creates the risk of
malfunction.
• A USB flash drive can become warm after very long
use. This is normal and does not indicate
malfunction.
• Static electricity conducted to the USB flash drive
port from your hand or from a USB flash drive can
cause malfunction of the Digital Piano. If this
happens, turn the Digital Piano off and then back on
again.
Copyrights
You are allowed to use recordings for your own
personal use. Any reproduction of an audio or music
format file, without the permission of its copyright
holder, is strictly prohibited under copyright laws
and international treaties. Also, making such files
available on the Internet or distributing them to third
parties, regardless of whether such activities are
conducted with or without compensation, is strictly
prohibited under copyright laws and international
treaties. CASIO COMPUTER CO., LTD. shall not be
held in any way liable for any use of this Digital
Piano that is illegal under copyright laws.
Connecting a USB Flash Drive
to and Detaching It from the
Digital Piano
IMPORTANT!
• Never plug any other device besides a USB flash
drive into the USB flash drive port.
• When you perform a USB flash drive operation or
turn on the Digital Piano while a USB flash drive is
plugged in, the Digital Piano initially needs to
perform a “mounting” sequence to prepare for data
exchange with the USB flash drive. Digital Piano
operations are momentarily disabled while a
mounting sequence is being performed. While the
mounting process is in progress, the message
“Media Mounting” will be displayed or “*****” will
flash on the display. It may take up to 10 or 20
seconds or even longer for a USB flash drive to be
mounted. Do not attempt to perform any operation
on the Digital Piano while a mounting sequence is in
progress. A USB flash drive needs to be mounted
each time it is connected to the Digital Piano.
■ To insert a USB flash drive
1.
As shown in the illustration below, insert the
USB flash drive into the Digital Piano’s USB
flash drive port.
• Carefully push the USB flash drive in as far as it will
go. Do not use undue force when inserting the USB
flash drive.
USB flash drive port
USB flash drive
E-48
B
USB Flash Drive
1.
Check to confirm that there is no data
exchange operation being performed, and
then pull the USB flash drive straight out.
Formatting a USB Flash Drive
IMPORTANT!
• Be sure to format a USB flash drive on the Digital
Piano before using it for the first time.
• Before formatting a USB flash drive, make sure it
does not have any valuable data stored on it.
• The format operation performed by this Digital Piano
is a “quick format”. If you want to completely delete
all of the data in USB flash drive, format it on your
computer or some other device.
<Supported USB Flash Drives>
This Digital Piano supports USB flash drives formatted
to FAT32. If your USB flash drive is formatted to a
different file system, use the Windows format function
to reformat it to FAT32. Do not use quick format.
1.
2.
3.
4.
5.
Insert the USB flash drive you want to format
into the Digital Piano’s USB flash drive port.
Press the cs (FUNCTION) button.
Press the ds (AUDIO RECORDER) button.
Press the do (i) button to switch to the
“MediaFormat” screen.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
Select the data you want to save to the USB
flash drive.
To select this
type of data:*1
Press the ct (YES) button.
Do this:
User rhythms
Select from among user rhythms 001
through 010 (page E-21).
User Music
Preset
Select from among user Music Preset
001 through 050 (page E-29).
Recorder songs Select from among recorder songs 1
through 5 (page E-35).
Press the bn (RHYTHM) button so the
RHYTHM lamp next to it is lit.
*1 For more information about data types, see page
E-47.
*2 All registration data (24 banks × 4 areas) is saved
in a single file.
3.
Hold down the ds (AUDIO RECORDER)
button until the “LOAD” screen appears for
the data you selected.
• You can cancel the LOAD/SAVE operation any time
by pressing the dm (EXIT) button.
Press the dp (ENTER) button.
• The message “Please Wait” will remain on the
display while the format operation is being
performed. Do not perform any Digital Piano
operation while this message is on the display.
“Complete” appears on the display after formatting
is complete.
B
Use the following procedure to save Digital Piano data
to a USB flash drive.
• Song Recorder songs can be converted to standard
MIDI files (SMF format 0) and saved.
• User songs (downloaded songs, etc.) cannot be
saved to a USB flash drive.
Registrations*2
This will display a confirmation message “SURE?”.
• If you want to cancel the format operation, press the
ct (NO) or dm (EXIT) button.
6.
Saving Digital Piano Data to a
USB Flash Drive
4.
Press the do (i) button to switch to the
“SAVE” screen for the data you selected.
• If you are saving a recorder song to a standard MIDI
file (SMF), press the do (i) button again so “SMF” is
displayed on the right side of the screen.
E-49
English
■ To remove a USB flash drive
USB Flash Drive
5.
Use the ct (w, q) buttons to select the file
number (01 to 99) you want to assign to the
data when it is saved to the USB flash drive.
• The file number is the final two characters of the file
name* that appears on the display. By changing this
within the range of 01 to 99 for each save, up to 99
files of the same data type can be stored on the USB
flash drive.
* The first six characters of the file name indicate the
data type as shown below. These characters are
fixed and cannot be changed.
Data Type
File Name
(** = file number)
User rhythms
USRRHY**
User Music Preset
USRMPS**
Recorder songs
RECSNG**
Registrations
REGIST**
6.
Press the dp (ENTER) button.
• The message “Please Wait” will remain on the
display while the save operation is being performed.
Do not perform any Digital Piano operation while
this message is on the display. “Complete” appears
on the display after data save is complete.
• If there is already a file with the same name on the
USB flash drive, a message “Replace?” will appear
asking if you want to overwrite it with the new data.
Press the ct (YES) button to overwrite or the ct (NO)
button to cancel the save operation.
■ USB Flash Drive Data (File) Storage
Locations
The above procedure stores Digital Piano data in a data
folder on the USB flash drive. The data folder where
the data is stored depends on the data type.
Data Type
Data Folder Name
User rhythms
RHYTHMAC
User songs
MUSICLIB
User music presets
MUSICPST
Song recorder songs
RECORDER
Registrations
REGISTMR
• The above data folders are created automatically
when you format the USB flash drive on the Digital
Piano (page E-49).
• Note that a file not in one of the data folders cannot
be loaded, deleted, or renamed by the Digital Piano.
You also will not be able to recall, delete, or play any
file stored in any subfolder inside one of the data
folders.
E-50
Loading Data from a USB
Flash Drive to Digital Piano
Memory
You can use the procedure below to load data from a
USB flash drive into Digital Piano memory.
IMPORTANT!
• Make sure that the data you want to load is in one of
the data folders described under the procedure in
the preceding section of this manual. Note that if you
put data into a music data play-only folder (such as
the PLAY folder), you will not be able to load the file
into Digital Piano memory.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
Select the data you want to load.
To load this
type of data*
Do this:
User rhythms
Select from among user rhythms 001
through 010 (page E-21).
User songs
Select from among user songs 001
through 010 (page E-25).
User Music
Preset
Select from among user Music Presets
001 through 050 (page E-29).
Recorder songs Select from among recorder songs 1
through 5 (page E-35).
Registrations
Press the bn (RHYTHM) button so the
RHYTHM lamp next to it is lit.
* For more information about data types, see page
E-47.
3.
Hold down the ds (AUDIO RECORDER)
button until the “LOAD” screen appears for
the data you selected.
• You can cancel the LOAD/SAVE operation any time
by pressing the dm (EXIT) button.
4.
Use the ct (w, q) buttons to select the file
you want.
5.
Press the dp (ENTER) button.
• The message “Please Wait” will remain on the
display while the load operation is being performed.
Do not perform any Digital Piano operation while
this message is on the display. “Complete” appears
on the display after data loading is complete.
• If there already is a file with the same name in the
Digital Piano memory, a message (Replace?) will
appear asking if you want to replace it with the new
data. Press the ct (YES) button to overwrite or the ct
(NO) button to cancel the load operation.
USB Flash Drive
Renaming a USB Flash Drive
File
Use the following procedure to delete USB flash drive
data (files).
Use the following procedure to change the file name of
a file on a USB flash drive.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
2.
3.
4.
Press the cs (FUNCTION) button.
2.
3.
4.
Press the cs (FUNCTION) button.
5.
Press the dp (ENTER) button.
5.
Press the dp (ENTER) button.
Press the ds (AUDIO RECORDER) button.
Use the do (i) button to switch to the
“FileDelete” screen.
This displays a screen for selecting data for deletion.
Press the ds (AUDIO RECORDER) button.
Use the do (i) button to switch to the
“FileRename” screen.
This displays a screen for changing the file name.
6.
Use the ct (w, q) buttons to select the file
you want.
6.
Use the ct (w, q) buttons to select the file
you want.
7.
Press the dp (ENTER) button.
7.
Use the do (i) and dn (u) buttons to move
the flashing cursor to the character you want
to change, and then use the ct (w, q)
buttons to change the character.
This will display a confirmation message “SURE?”.
• If you want to cancel the delete operation, press the
ct (NO) or dm (EXIT) button.
8.
Press the ct (YES) button.
• The characters you can select are shown below.
• The message “Please Wait” will remain on the
display while the delete operation is being
performed. Do not perform any Digital Piano
operation while this message is on the display.
“Complete” appears on the display after deletion is
complete.
0
A
K
U
(
8.
1 2 3
B C D
L M N
V W X
) - ^
4
E
O
Y
{
5 6
F G
P Q
Z S
} @
7
H
R
&
~
8
I
S
_
`
9
J
T
'
After the file name is the way you want, press
the dp (ENTER) button.
This will display a confirmation message “SURE?”.
• If you want to cancel the renaming operation, press
the ct (NO) or dm (EXIT) button.
9.
Press the ct (YES) button.
• The message “Please Wait” will remain on the
display while the rename operation is being
performed. Do not perform any Digital Piano
operation while this message is on the display.
“Complete” appears on the display after renaming is
complete.
E-51
English
Deleting Data from a USB
Flash Drive
USB Flash Drive
Playing Back a Song on a USB
Flash Drive
You can use the procedure below to play back a user
song (page E-25) stored on a USB flash drive without
loading the song into Digital Piano memory.
Playing Back All of the Songs in a Folder
Use the procedure below to select one of the four
folders on a USB flash drive and play back all of the
songs in the folder in succession.
1.
■ USB Flash Drive Folders
Formatting a USB flash drive on the Digital Piano will
automatically create a folder named PLAY on the USB
flash drive. Also, four folders, named A, B, C, and D,
are automatically created inside the PLAY folder. Place
any song data you want to play on the Digital Piano
into one of the four folders inside the PLAY folder. You
can use the four folders to group your music data by
family member, genre, or some other categories. Use
buttons dl through do (A through D) to select a folder.
Folder Name
Button Assignment
A
dl (A)
dm (B)
dn (C)
do (D)
B
C
D
1.
Store the music data you want to play in one
of the USB flash drive folders.
2.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
3.
While holding down the cs (FUNCTION)
button, press the ds (AUDIO RECORDER)
button.
4.
Press one of the folder selection buttons (dl
through do) to select the USB flash drive
folder (Folder A through Folder D) you want.
This will display a song number and song name.
5.
Use the ct (w, q) buttons to select the
song you want.
6.
Press the bs (PLAY/STOP) button.
This will start playback.
• Each press of bs (PLAY/STOP) starts and stops
playback.
• Fast forward, fast reverse, tempo changes, and other
operations are the same as those during playback of a
user song in Digital Piano memory. For details, see
“Listening to Songs Loaded from an External Source”
(page E-25).
7.
E-52
To exit the USB flash drive playback mode,
hold down the cs (FUNCTION) button as you
press the ds (AUDIO RECORDER) button.
While holding down the bt (PART) button,
press the bs (PLAY/STOP) button.
This will start tone demo tune playback (page E-24).
2.
While holding down the cs (FUNCTION)
button, press the ds (AUDIO RECORDER)
button.
This will switch from tone demo tune playback to USB
flash drive playback.
• While playback is in progress, you can use the dl
through do buttons (Folder A through Folder D) to
switch playback to another folder.
• To stop playback, press the bs (START/STOP)
button.
USB Flash Drive
One of the error messages below appears on the display when a problem occurs.
• To clear an error message and return to the normal display, press the dm (EXIT) button.
Display Message
No Media
No File
No Data
Read Only
Media Full
File Full
Not SMF01
Size Over
Wrong Data
Convert
Format
Media R/W
File Name
B
Cause
1. The USB flash drive is not connected to the
Digital Piano’s USB flash drive port.
2. The USB flash drive was removed while some
operation was in progress.
3. The USB flash drive is write-protected.
4. The USB flash drive has anti-virus software.
Action
1. Correctly plug the USB flash drive into the USB
flash drive port.
2. Do not remove the USB flash drive while any
operation is in progress.
3. Unprotect the USB flash drive.
4. Use a USB flash drive that does not have antivirus software.
There is no loadable file in the “MUSICLIB” folder or Move the file you want to load into the “MUSICLIB”
no playable file in the “AUDIO” folder.
folder or the file you want to play into the “AUDIO”
folder (pages E-48 and E-49).
You are attempting to save data to a USB flash drive Record something before performing a save
when there is no data to save.
operation.
A read-only file with the same name you are trying • Change the name and then save the new data.
to use is already stored on USB flash drive.
• Remove the read-only attribute from the existing
USB flash drive file and overwrite it with the new
data.
• Use a different USB flash drive.
There is not enough space available on the USB flash Delete some of the files on the USB flash drive to
drive.
make room for new data (page E-51) or use a
different USB flash drive.
1. There are too many files on the USB flash drive. 1. Delete some of the files on the USB flash drive to
make room for new data.
2. There is a file named TAKE99.WAV in the
2. Delete the WAV file in the “AUDIO” folder.
“AUDIO” folder.
You are attempting to play back SMF Format 2 song This Digital Piano supports playback of SMF Format
data.
0 or Format 1 only.
The data on the USB flash drive is too big to play.
This Digital Piano supports playback of song data
files with a maximum size of 320 kbytes.
1. The USB flash drive data is corrupted.
—
2. USB flash drive contains data that is not
supported by this Digital Piano.
There is not enough Digital Piano memory available Reduce the size of the song data.
to convert a song recorder song to SMF data and
Example:
store it on the USB flash drive.
Delete any tracks that are not required.
1. The USB flash drive format is not compatible
1. Format the USB flash drive on the Digital Piano.
with this Digital Piano.
2. The USB flash drive is corrupted.
2. Use a different USB flash drive.
The USB flash drive is corrupted.
Use a different USB flash drive.
You are attempting to rename a USB flash drive file Rename to a different file name.
with a file name that is already used by another file
on the USB flash drive.
E-53
English
Error Messages
Connecting to a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play
data from the Digital Piano to commercially available
music software running on your computer, or you can
send MIDI data from your computer to the Digital
Piano for playback.
Minimum Computer System
Requirements
The following shows the minimum computer system
requirements for sending and receiving MIDI data.
Check to make sure that your computer complies with
these requirements before connecting the Digital Piano
to it.
Connecting the Digital Piano
to Your Computer
IMPORTANT!
• Make sure you follow the steps of the procedure
below exactly. Connecting incorrectly can make data
send and receive impossible.
1.
Turn off the Digital Piano and then start up
your computer.
• Do not start up the music software on your computer
yet!
2.
z Operating System
Windows® XP (SP2 or later)*1
Windows Vista® *2
Windows® 7 *3
Mac OS® X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X)
*1: Windows XP Home Edition
Windows XP Professional (32-bit)
*2: Windows Vista (32-bit)
*3: Windows 7 (32-bit, 64-bit)
After starting up your computer, use a
commercially available USB cable to connect
it to the Digital Piano.
B connector
USB cable
(A-B type)
A connector
Digital Piano USB port
Computer USB port
z USB port
IMPORTANT!
3.
Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer, the driver software required
to send and receive data will be installed on your
computer automatically.
• Never connect to a computer that does not conform
to the above requirements. Doing so can cause
problems with your computer.
4.
Start up commercially available music
software on your computer.
5.
Configure the music software settings to
select one of the following as the MIDI device.
CASIO USB-MIDI : For Windows Vista, Windows 7,
Mac OS X
USB Audio Device: For Windows XP
• For information about how to select the MIDI device,
see the user documentation that comes with the
music software you are using.
IMPORTANT!
• Be sure to turn on the Digital Piano first before
starting up your computer’s music software.
E-54
Connecting to a Computer
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when
you turn off your computer and/or Digital Piano.
• This Digital Piano conforms to General MIDI Level 1
(GM).
• For detailed specifications and connections that
apply to MIDI data send and receive by this Digital
Piano, see the latest support information provided
by the website at the following URL.
http://world.casio.com/
Using MIDI
What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical instruments
and computers (machines) produced by different
manufacturers.
For details about the MIDI specifications of this Digital
Piano, see the “MIDI Implementation” document at the
website located at the URL below.
http://world.casio.com/
NOTE
• You can alter the Digital Piano’s MIDI setup by
changing the MIDI data send channel or other
settings. For details, see “MIDI Group” (page E-45).
• Use a separately available or commercially available
MIDI cable to connect the MIDI terminals of your
Digital Piano and another electronic musical
instrument for exchange of MIDI data.
Transferring Data between the
Digital Piano and a Computer
You can use the procedure below to transfer edited
Auto Accompaniment data, recorder data, and other
data from the Digital Piano to a computer for storage.
You also can transfer standard MIDI files (SMF), as
well as Auto Accompaniment data you downloaded
from the CASIO website from your computer to Digital
Piano memory.
■ Data Types Supported for Data Transfer
The types of data that can be stored or imported are the
same as those that can be saved to a USB flash drive
from the Digital Piano (page E-47).*
* Recorder songs (page E-35) cannot be converted to
SMF data for storage on a computer.
IMPORTANT!
• Turning off the Digital Piano while data is being
saved or loaded can cause all data currently stored
in Digital Piano memory (recorded songs, etc.) to be
deleted. Take care so power is not turned off
accidentally during data save and load operations. If
data is deleted, it will take longer than normal for the
Digital Piano to power up the next time you turn it on
(page E-5).
1.
Remove the USB flash drive from the Digital
Piano’s USB flash drive port (page E-48).
• You will not be able to transfer data between the
Digital Piano and a computer while a USB flash drive
is in the USB flash drive port.
2.
Perform steps 1 through 3 under “Connecting
the Digital Piano to Your Computer” to
connect the Digital Piano to your computer
(page E-54).
E-55
English
NOTE
Connecting to a Computer
3.
While holding down the cs (FUNCTION)
button, press the dr (USB DEVICE MODE)
button.
5.
Double-click “PIANO”.
You now should see five data folders, one for each data
type.
This will enter the storage mode, which enables data
transfer with the connected computer. The cs
(FUNCTION) button lamp will flash and the display
will appear as shown below.
6.
• To exit the storage mode at any time, press the cs
(FUNCTION) button. This is the only button
operation that is supported while the Digital Piano is
in the storage mode.
• You will not be able to enter the storage mode while
any one of the following operations is in progress.
Metronome, Auto Accompaniment, song playback,
recorder (on), Auto Accompaniment editing, Music
Preset editing, data transfer between the Digital
Piano and USB flash drive.
4.
Referring to the table below, open the folder
that corresponds to the type of data you want
to transfer.
To load this
type of data
Open this data
Data File Name
folder
RHYTHMAC
BIDRHYnn.AC7
(nn: 01 to 10)
BIDRHYnn.Z00
(nn: 01 to 10)
BIDRHYnn.CKF
(nn: 01 to 10)
User songs
(page E-25)
MUSICLIB
BIDSNGnn.MID
(nn: 01 to 10)
(SMF Format 0 or
Format 1)
BIDSNGnn.CM2
(nn: 01 to 10)
(CASIO format)
User Music Presets
(page E-29)
MUSICPST
BIDMPSnn.MPS
(nn: 01 to 50)
Recorder songs
(page E-35)
RECORDER
BIDRECnn.CSR
(nn: 01 to 05)
Registration
(page E-33)
REGISTMR
BIDREGAL.CR6
User rhythms
(page E-21)
If your computer is running Windows XP,
double-click “My Computer”.*
Under “Devices with Removable Storage”, you should
be able to see a folder representing Digital Piano
memory or the USB flash drive loaded in the Digital
Piano.
* Windows Vista, Windows 7: Double-click “Computer”.
Mac OS: Skip step 4 and double-click “PIANO” on
your Mac desktop.
• Data types and contents are the same as those when
saving Digital Piano data to or loading it from a USB
Flash Drive. See “USB Flash Drive” (page E-47) for
more information.
E-56
Connecting to a Computer
File name extensions (.MID, .CM2, etc.) are
not displayed under initial default Windows
settings. Perform the procedure below to turn
on display of file name extensions.
(1)
(2)
(3)
(4)
8.
Open any one of the folders shown above.
Perform one of the following operations to display
folder information.
• Windows XP:
On the [Tools] menu at the top of the folder
window, select [Folder Options].
• Windows Vista, Windows 7:
On the left side of the folder window, click
[Organize] and then select [Folder and Search
Options].
On the Folder Information window, click the
[View] tab.
Under “Advanced Settings”, clear the “Hide
extensions for known file types” check box and
then click [OK].
After opening a data folder, perform either of
the following operations to transfer data.
8-1.To transfer data from Digital Piano
memory to a computer, perform the
required operation on your computer to
copy the data from the Digital Piano
folder you opened in step 6 of this
procedure to another location on your
computer.
8-2.To load data from your computer to
Digital Piano memory, first copy the data
you want to load to the data folder you
opened. Next, rename the file as shown
in the “Data File Name” * column in the
table under step 6 of this procedure.
■ Using Auto Accompaniment Data from the
CASIO Website
You can download other model Auto Accompaniment
data from the “Internet Data Expansion System” of the
CASIO Music Site (http://music.casio.com/) and
transfer it to Digital Piano memory.
NOTE
• Since the accompaniment data is for other models,
you may experience some abnormalities when
playing it on this model.
Copyrights
The rights of creators and copyright holders of music,
images, computer programs, databases, and other
data are protected by copyright laws. You are allowed
to reproduce such works for personal or noncommercial use only. For any other purpose, all
reproduction (including data format conversion),
modification, transfer of reproductions, distribution
over a network, or any other use without permission
of the copyright holder exposes you to claims for
damages and criminal prosecution for copyright
infringement and violation of the author’s personal
rights. Be sure to reproduce and otherwise use
copyrighted works only in accordance with applicable
copyright laws.
* The value you assign for “nn” in the data file name in
this case specifies the user number (user rhythm, user
song, recorder song, user preset) you want the data to
be assigned to.
Example: Renaming downloaded song data to
BIDSNG04.CM2 to the MUSICLIB folder will
make the data user song 004.
9.
Press the cs (FUNCTION) button to exit the
storage mode.
• If you are using a Macintosh, drag the PIANO folder
to the Trash and then press the Digital Piano’s cs
(FUNCTION) button.
E-57
English
7.
Reference
Troubleshooting
Problem
No sound is produced when I
press a keyboard key.
The pitch of the Digital Piano
is off.
Tones and/or effects sound
strange. Turning power off
and then back on again does
not eliminate the problem.
Cause
1. The VOLUME controller is set to 1. Rotate the VOLUME controller more
“MIN”.
towards “MAX”.
2. Headphones or an adaptor plug is 2. Disconnect whatever is connected to the
plugged into one of the PHONES
PHONES jack.
jacks.
1. The Digital Piano’s key setting is 1. Change the key setting to “440.0 Hz”, or
something other than “440.0 Hz”.
turn Digital Piano power off and then
back on again.
2. Digital Piano tuning is incorrect.
2. Adjust Digital Piano tuning, or turn the
Digital Piano off and then back on again.
3. A non-standard temperament
3. Change the temperament setting to
setting is being used.
“00:Equal”, which is the standard modern
tuning.
4. Octave shift is enabled.
4. Change the octave shift setting to 0.
The “Setting Backup” feature is
Turn off “Setting Backup”. Next, turn power
turned on.
off and then back on again.
Example: Note intensity does
not change even though I alter
key pressure.
I cannot transfer data after
—
connecting the Digital Piano
to a computer.
I cannot record chord
accompaniment data on my
computer.
I cannot store data to a USB
flash drive or load data from a
USB flash drive.
Playback stops part way
through while transferring
song data from my computer.
Action
See
Page
) E-5
) E-6
) E-44
) E-44
) E-44
) E-11
) E-46
) E-54
Accomp MIDI Out is turned off.
1. Check to make sure that the USB cable
is connected to the Digital Piano and
computer, and that the correct device is
selected with your computer’s music
software.
2. Turn off the Digital Piano and then exit
the music software on your computer.
Next, turn the Digital Piano back on and
then restart the music software on your
computer.
Turn on Accomp MIDI Out.
) E-45
—
See “Error Messages”.
) E-53
Stop song playback, disconnect the USB
) E-54
cable from the Digital Piano, and then
reconnect it. Next, try playing back the song
again.
If this does not solve the problem, quit the
MIDI software you are using, disconnect the
USB cable from the Digital Piano, and then
reconnect it. Next, restart the MIDI software
and then try playing back the song again.
A tone’s quality and volume
This is an unavoidable result of the digital sampling process,* and does not indicate
sounds slightly different
malfunction.
depending where it is played * Multiple digital samples are taken for the low range, middle range, and high range of the
on the keyboard.
original musical instrument. Because of this, there may be a very slight difference in tonal
quality and volume between sample ranges.
When I press a button, the
Performing a button operation while playing with the Duet Mode, Auto Accompaniment, the
note that is sounding cuts out recorder, or other functions can cause such phenomena when the Digital Piano switches
momentarily or there is a
internal tone effects. It does not indicate malfunction.
slight change in how effects
are applied.
E-58
Digital noise from the USB cable or
power cord caused data
communication your computer and
Digital Piano to be interrupted.
Reference
Even though I play on
different ranges of the
keyboard, the notes do not
change octaves.
See
Page
The ranges of certain tones are limited, which means that octaves change normally up to a
certain low note or high note. With such a tone, the notes of the lowest octave will be
repeated to the left of the lowest possible note, and the highest octave will be repeated to the
right of the highest possible note. This is due do limitations in the range of the original musical
instrument for each tone, and does not indicate malfunction of the Digital Piano.
Cause
Action
E-59
English
Problem
Reference
Product Specifications
Model
PX-350MBK/PX-350MWE
Keyboard
88-key piano keyboard, with Touch Response (3 types)
Maximum Polyphony
128 notes
Tones
250 (with Layer and Split)
Effects
Reverb (4 types), Chorus (4 types), Brilliance (–3 to 0 to 3), Damper Resonance
Metronome
• Beats per measure: 0, 2, 3, 4, 5, 6
• Tempo Range: 20 to 255
Duet
Adjustable tone range: 0 to 3 octaves for the left keyboard; –4 to –1 octaves for the right keyboard
Auto Accompaniment
•
•
•
•
Demo Songs
6 songs (tone demo songs)
User Songs
Up to 10 songs (320KB* maximum per song)
Music Presets
Built-in Presets: 300
User Presets: Up to 50 (Approximately 8KB* maximum per preset)
Registration
96 (4 setups × 24 banks)
Song Recorder
•
•
•
•
•
Audio Recorder
• Real-time recording and playback to USB flash drive*
* Linear PCM, 16bit, 44.1 kHz, stereo .WAV format
• Songs: 99 files
• Approximately 25 minutes maximum recording per file.
Pedals
Damper, Soft/Sostenuto (switchable)
Other Functions
•
•
•
•
•
•
MIDI
16 multi-timbre received, GM Level 1 standard
Pitch Bend Wheel
Pitch Bend Range: 00 to 12 semitones
USB Flash Drive
SMF playback, data storage, data loading, USB flash drive format, playback of audio data
Inputs/Outputs
•
•
•
•
•
•
•
•
•
E-60
Built-in Rhythms: 180
User Rhythms: Up to 10 (Approximately 40KB* maximum per rhythm)
One Touch Presets: 180 types
Auto Harmonize: 12 types
Functions: Real-time recording, playback
Number of Songs: 5
Number of Tracks: 17 (System Track + Tracks 01 through 16)
Capacity: Approximately 50,000 notes total (Up to approximately 10,000 notes per song)
Punch-in recording
Transpose: ±1 octave (–12 to 00 to 12)
Tuning: A4 = 415.5 Hz to 440.0 Hz to 465.9 Hz
Octave Shift: ±2 octaves
Temperaments: 17 types
Stretch Tune
Panel Lock
PHONES jacks: Stereo standard jacks × 2
Pedal Jacks: Standard jacks × 2
MIDI OUT/IN terminals
LINE OUT R, L/MONO jacks: Standard jacks × 2
Output impedance: 2.3KΩ
Output voltage: 1.8V (RMS) MAX
LINE IN R, L/MONO jacks: Standard jacks × 2
Input impedance: 9.0KΩ
Input voltage: 200mV
Power: 12V DC
USB port: Type B
USB flash drive port : Type A
Pedal connector (for optional SP-33 only)
Speakers
[13cm × 6cm (rectangular)] × 2 + φ 5cm × 2 (Output: 8.0W + 8.0W)
Power Requirements
AC Adaptor: AD-A12150LW
• Auto Power Off: Approximately 4 hours after last operation. Auto Power Off can be disabled.
Power Consumption
12V = 18W
Dimensions
132.2 (W) × 28.6 (D) × 13.5 (H) cm (52 1/16 × 11 1/4 × 5 5/16 inch)
Weight
Approximately 11.6kg (25.6lbs)
English
Reference
* Based on 1KB = 1024bytes, 1MB = 10242 bytes
• Specifications and designs are subject to change without notice.
E-61
Reference
Operating Precautions
Be sure to read and observe the following operating
precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
• The above devices will not cause malfunction of the
product, but the product can cause interference in
the audio or video of a nearby device.
■ User Maintenance
• Never use benzine, alcohol, thinner, or other
chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a
soft cloth moistened in a weak solution of water and
a mild neutral detergent. Wring all excess moisture
from the cloth before wiping.
■ Included and Optional Accessories
Use only accessories that are specified for use with this
product. Use of unauthorized accessories creates the
risk of fire, electric shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product.
These are “weld lines” that result from the plastic
molding process. They are not cracks or scratches.
■ Musical Instrument Etiquette
Always be aware of others around you whenever using
this product. Be especially careful when playing late at
night to keep the volume at levels that do not disturb
others. Other steps you can take when playing late at
night are closing windows and using headphones.
E-62
• Any reproduction of the contents of this manual,
either in part or its entirety, is prohibited. Except for
your own, personal use, any other use of the
contents of this manual without the consent of
CASIO is prohibited under copyright laws.
• IN NO EVENT SHALL CASIO BE LIABLE FOR
ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS
OF PROFITS, BUSINESS INTERRUPTION, LOSS
OF INFORMATION) ARISING OUT OF THE USE
OF OR INABILITY TO USE THIS MANUAL OR
PRODUCT, EVEN IF CASIO HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
• The contents of this manual are subject to change
without notice.
■ AC Adaptor Handling Precautions
• Use a power outlet that is easily accessible so you
can unplug the AC adaptor when a malfunction
occurs or whenever else you need to do so.
• The AC adaptor is intended for indoor use only. Do
not use it where it might be exposed to splashing or
moisture. Do not place any container, such as a
flower vase, that contains liquid on the AC adaptor.
• Store the AC adaptor in a dry place.
• Use the AC adaptor in an open, well-ventilated area.
• Never cover the AC adaptor with newspaper, a table
cloth, a curtain, or any other similar item.
• Unplug the AC adaptor from the power outlet if you
do not plan to use the Digital Piano for a long time.
• Never try to repair the AC adaptor or modify it in
any way.
• AC adaptor operating environment
Temperature: 0 to 40°C
Humidity: 10% to 90% RH
Output polarity:
Reference
Model: AD-A12150LW
1. Read these instructions.
2. Keep these instructions on hand.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).
8. Use only attachments and accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:
when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into
the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,
when the product does not operate normally, when the product is dropped.
10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing
liquid on the product.
11. Do not allow the electrical load output to exceed the label rating.
12. Make sure the surrounding area is dry before plugging into a power source.
13. Make sure the product is oriented correctly.
14. Unplug the product during lightning storms or when you do not plan to use it for a long time.
15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the
manufacturer’s instructions.
16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in
locations close to plugs and convenience receptacles, and in locations where it exits from the product.
17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow
immediate disconnection of the plug in case of emergency.
The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which
may be sufficient to constitute the risk of electric shock to users.
’
The symbol below is an alert indicating the presence of important operating and maintenance (servicing)
instructions in the documentation that accompanies the product.
*
E-63
English
AC Adaptor Handling Precautions
Appendix/Apéndice
Tone List/Lista de tonos
Group
Name/
Nombre
del grupo
Group
Number/
Número
de grupo
Sequential
Number/
Número
secuencial
Tone Name/
Nombre del tono
Program
Change/
Cambio
de
programa
Bank
Select
MSB/
MSB de
selección
de banco
GRAND PIANO
Group
Name/
Nombre
del grupo
Group
Number/
Número
de grupo
Sequential
Number/
Número
secuencial
Tone Name/
Nombre del tono
Program
Change/
Cambio
de
programa
Bank
Select
MSB/
MSB de
selección
de banco
VARIOUS
001
001
GRAND PIANO CONCERT
0
48
001
062
ACOUSTIC BASS
32
48
002
002
GRAND PIANO STUDIO
0
54
002
063
RIDE BASS
32
49
003
003
GRAND PIANO MODERN
0
49
003
064
FINGERED BASS 1
33
48
004
004
GRAND PIANO CLASSIC
0
50
004
065
FINGERED BASS 2
33
49
005
005
GRAND PIANO BRIGHT
1
52
005
066
FINGERED BASS 3
33
50
006
006
GRAND PIANO MELLOW
0
51
006
067
PICKED BASS
34
48
007
007
GRAND PIANO DOLCE
0
55
007
068
TRANCE BASS
38
48
008
008
ROCK PIANO
1
48
008
069
NYLON STR.GUITAR
24
48
009
009
LA PIANO
1
49
009
070
STEEL STR.GUITAR 1
25
48
010
010
DANCE PIANO
1
51
010
071
STEEL STR.GUITAR 2
25
49
011
011
HONKY-TONK
3
48
011
072
STEEL STR.GUITAR 3
25
50
012
012
OCTAVE PIANO
3
49
012
073
JAZZ GUITAR
26
48
013
013
STRINGS PIANO
0
52
013
074
CLEAN GUITAR
27
49
014
014
PIANO PAD
0
53
014
075
CHORUS CLEAN GUITAR
27
48
015
076
CRUNCH ELEC.GUITAR 1
27
50
001
015
ELEC.PIANO 1
4
48
016
077
CRUNCH ELEC.GUITAR 2
27
51
002
016
ELEC.PIANO 2
5
48
017
078
OVERDRIVE GUITAR
29
48
49
ELEC PIANO
003
017
60’S E.PIANO
4
51
018
079
BREATHY ALTO SAX
65
004
018
E.GRAND 80
2
48
019
080
BREATHY TENOR SAX
66
49
005
019
DYNO ELEC.PIANO
4
49
020
081
ALTO SAX
65
48
006
020
FM ELEC.PIANO
5
49
021
082
TENOR SAX
66
48
007
021
MELLOW E.PIANO
4
50
022
083
CLARINET
71
48
008
022
POP ELEC.PIANO
5
50
023
084
FLUTE
73
48
009
023
CHORUS E.PIANO
4
53
024
085
TRUMPET
56
48
010
024
SYNTH-STR.E.PIANO
4
52
025
086
TROMBONE
57
48
011
025
VIBRAPHONE
11
48
026
087
STEREO BRASS
61
48
012
026
CLAVI
7
48
027
088
BRASS SECTION
61
49
013
027
WAH CLAVI
7
49
028
089
SYNTH-BRASS
62
48
014
028
HARPSICHORD
6
48
029
090
80’S SYNTH-BRASS
62
49
015
029
COUPLED HARPSICHORD
6
49
030
091
SAW LEAD
81
48
016
030
MARIMBA
12
48
031
092
MELLOW SAW LEAD
81
49
017
031
CHORUS VIBRAPHONE
11
49
032
093
SQUARE LEAD
80
48
033
094
ER HU
110
56
56
ORGAN
001
032
ROCK ORGAN 1
16
49
034
095
YANG QIN
15
002
033
JAZZ ORGAN
17
48
035
096
ZHENG
107
56
003
034
DRAWBAR ORGAN
16
48
036
097
PI PA
105
56
004
035
ROTARY DRAWBAR
16
50
037
098
DI ZI
72
56
005
036
ROTARY ORGAN
16
51
038
099
XIAO
77
56
006
037
PERC.ORGAN
17
49
039
100
SHENG
109
56
007
038
70’S ORGAN
17
50
040
101
SITAR
104
56
008
039
OVERDRIVE ORGAN
16
52
041
102
TANPURA
104
57
009
040
TREMOLO ORGAN
16
53
042
103
HARMONIUM
20
56
010
041
ROCK ORGAN 2
18
48
043
104
SANTUR
15
58
011
042
ELEC.ORGAN
16
54
044
105
SHANAI
111
56
012
043
FULL DRAWBAR
16
55
045
106
KANUN
15
59
013
044
CHURCH ORGAN
19
48
046
107
OUD
105
59
014
045
CHAPEL ORGAN
19
49
047
108
NEY
72
57
STRINGS
GM TONES
001
046
STEREO STRINGS 1
49
48
001
109
GM PIANO 1
0
0
002
047
STEREO STRINGS 2
48
49
002
110
GM PIANO 2
1
0
003
048
STRING ENSEMBLE
48
48
003
111
GM PIANO 3
2
0
004
049
SYNTH-STRINGS
50
48
004
112
GM HONKY-TONK
3
0
005
050
70’S SYNTH-STR.
50
49
005
113
GM E.PIANO 1
4
0
006
051
80’S SYNTH-STR.
50
50
006
114
GM E.PIANO 2
5
0
007
052
VIOLIN SECTION
40
48
007
115
GM HARPSICHORD
6
0
008
053
CHOIR
52
48
008
116
GM CLAVI
7
0
009
054
SYNTH-VOICE
54
48
009
117
GM CELESTA
8
0
010
055
SYNTH-PAD
90
48
010
118
GM GLOCKENSPIEL
9
0
011
056
FANTASY
88
48
011
119
GM MUSIC BOX
10
0
012
057
NEW AGE
88
49
012
120
GM VIBRAPHONE
11
0
013
058
WARM PAD
89
48
013
121
GM MARIMBA
12
0
014
059
WARM VOX
89
49
014
122
GM XYLOPHONE
13
0
0
015
060
POLYSYNTH PAD
90
49
015
123
GM TUBULAR BELL
14
016
061
ATMOSPHERE PAD
99
48
016
124
GM DULCIMER
15
0
017
125
GM ORGAN 1
16
0
A-1
Appendix/Apéndice
Group
Name/
Nombre
del grupo
A-2
Group
Number/
Número
de grupo
Sequential
Number/
Número
secuencial
Tone Name/
Nombre del tono
Program
Change/
Cambio
de
programa
Bank
Select
MSB/
MSB de
selección
de banco
Group
Name/
Nombre
del grupo
Group
Number/
Número
de grupo
Sequential
Number/
Número
secuencial
Tone Name/
Nombre del tono
Program
Change/
Cambio
de
programa
Bank
Select
MSB/
MSB de
selección
de banco
0
018
126
GM ORGAN 2
17
0
090
198
GM WARM PAD
89
019
127
GM ORGAN 3
18
0
091
199
GM POLYSYNTH
90
0
020
128
GM PIPE ORGAN
19
0
092
200
GM SPACE CHOIR
91
0
021
129
GM REED ORGAN
20
0
093
201
GM BOWED GLASS
92
0
022
130
GM ACCORDION
21
0
094
202
GM METAL PAD
93
0
023
131
GM HARMONICA
22
0
095
203
GM HALO PAD
94
0
024
132
GM BANDONEON
23
0
096
204
GM SWEEP PAD
95
0
025
133
GM NYLON STR.GUITAR
24
0
097
205
GM RAIN DROP
96
0
026
134
GM STEEL STR.GUITAR
25
0
098
206
GM SOUND TRACK
97
0
027
135
GM JAZZ GUITAR
26
0
099
207
GM CRYSTAL
98
0
028
136
GM CLEAN GUITAR
27
0
100
208
GM ATMOSPHERE
99
0
029
137
GM MUTE GUITAR
28
0
101
209
GM BRIGHTNESS
100
0
030
138
GM OVERDRIVE GT
29
0
102
210
GM GOBLINS
101
0
031
139
GM DISTORTION GT
30
0
103
211
GM ECHOES
102
0
032
140
GM GT HARMONICS
31
0
104
212
GM SF
103
0
033
141
GM ACOUSTIC BASS
32
0
105
213
GM SITAR
104
0
034
142
GM FINGERED BASS
33
0
106
214
GM BANJO
105
0
035
143
GM PICKED BASS
34
0
107
215
GM SHAMISEN
106
0
036
144
GM FRETLESS BASS
35
0
108
216
GM KOTO
107
0
037
145
GM SLAP BASS 1
36
0
109
217
GM THUMB PIANO
108
0
038
146
GM SLAP BASS 2
37
0
110
218
GM BAGPIPE
109
0
039
147
GM SYNTH-BASS 1
38
0
111
219
GM FIDDLE
110
0
040
148
GM SYNTH-BASS 2
39
0
112
220
GM SHANAI
111
0
041
149
GM VIOLIN
40
0
113
221
GM TINKLE BELL
112
0
042
150
GM VIOLA
41
0
114
222
GM AGOGO
113
0
043
151
GM CELLO
42
0
115
223
GM STEEL DRUMS
114
0
0
044
152
GM CONTRABASS
43
0
116
224
GM WOOD BLOCK
115
045
153
GM TREMOLO STRINGS
44
0
117
225
GM TAIKO
116
0
046
154
GM PIZZICATO
45
0
118
226
GM MELODIC TOM
117
0
047
155
GM HARP
46
0
119
227
GM SYNTH-DRUM
118
0
048
156
GM TIMPANI
47
0
120
228
GM REVERSE CYMBAL
119
0
049
157
GM STRINGS 1
48
0
121
229
GM GT FRET NOISE
120
0
050
158
GM STRINGS 2
49
0
122
230
GM BREATH NOISE
121
0
051
159
GM SYNTH-STRINGS 1
50
0
123
231
GM SEASHORE
122
0
052
160
GM SYNTH-STRINGS 2
51
0
124
232
GM BIRD
123
0
053
161
GM CHOIR AAHS
52
0
125
233
GM TELEPHONE
124
0
054
162
GM VOICE DOO
53
0
126
234
GM HELICOPTER
125
0
055
163
GM SYNTH-VOICE
54
0
127
235
GM APPLAUSE
126
0
056
164
GM ORCHESTRA HIT
55
0
128
236
GM GUNSHOT
127
0
120
057
165
GM TRUMPET
56
0
129
237
STANDARD SET 1
0
058
166
GM TROMBONE
57
0
130
238
STANDARD SET 2
1
120
059
167
GM TUBA
58
0
131
239
STANDARD SET 3
2
120
120
060
168
GM MUTE TRUMPET
59
0
132
240
STANDARD SET 4
3
061
169
GM FRENCH HORN
60
0
133
241
ROOM SET
8
120
062
170
GM BRASS
61
0
134
242
HIP-HOP SET
9
120
063
171
GM SYNTH-BRASS 1
62
0
135
243
POWER SET
16
120
064
172
GM SYNTH-BRASS 2
63
0
136
244
ELECTRONIC SET
24
120
065
173
GM SOPRANO SAX
64
0
137
245
SYNTH SET 1
25
120
066
174
GM ALTO SAX
65
0
138
246
SYNTH SET 2
30
120
067
175
GM TENOR SAX
66
0
139
247
TRANCE SET
31
120
068
176
GM BARITONE SAX
67
0
140
248
JAZZ SET
32
120
069
177
GM OBOE
68
0
141
249
BRUSH SET
40
120
070
178
GM ENGLISH HORN
69
0
142
250
ORCHESTRA SET
48
120
071
179
GM BASSOON
70
0
072
180
GM CLARINET
71
0
073
181
GM PICCOLO
72
0
074
182
GM FLUTE
73
0
075
183
GM RECORDER
74
0
0
076
184
GM PAN FLUTE
75
077
185
GM BOTTLE BLOW
76
0
078
186
GM SHAKUHACHI
77
0
0
079
187
GM WHISTLE
78
080
188
GM OCARINA
79
0
081
189
GM SQUARE LEAD
80
0
082
190
GM SAW LEAD
81
0
083
191
GM CALLIOPE
82
0
084
192
GM CHIFF LEAD
83
0
085
193
GM CHARANG
84
0
086
194
GM VOICE LEAD
85
0
087
195
GM FIFTH LEAD
86
0
088
196
GM BASS+LEAD
87
0
089
197
GM FANTASY
88
0
Appendix/Apéndice
NOTE
• While sequential numbered tone 071 (STEEL
STR.GUITAR 2) or 072 (STEEL STR.GUITAR 3) is
selected, pressing multiple keys on the far left side of
the keyboard will produce a guitar strumming
sound. It does not indicate malfunction.
• See the “Drum Assignment List” (page A-4) for the
percussion instrument assigned to each keyboard
key when a drum set (Sequential Number 237 to 250)
is selected.
NOTA
• Si presiona múltiples teclas en el extremo izquierdo
del teclado mientras están seleccionados los tonos
secuenciales número 071 (STEEL STR. GUITAR 2) o
072 (STEEL STR. GUITAR 3), producirá un sonido
de rasgueo de guitarra. Esto no es ningún signo de
anomalía.
• Consulte la “Lista de asignación de batería” (página
A-4) para saber cuáles son los instrumentos de
percusión asignados a cada tecla cuando se
selecciona un ajuste de batería (números
secuenciales 237 a 250).
A-3
A-4
E b 6 87
C # 6 85
B b 5 82
A b 5 80
F # 5 78
E b 5 75
C # 5 73
High Q
Slap
Scratch Push
Scratch Pull
Sticks
Square Click
Metronome Click
Metronome Bell
Standard1 Kick 2
Standard1 Kick 1
Side Stick
Standard1 Snare 1
Hand Clap
Standard1 Snare 2
Low Tom 2
Closed Hi-Hat
Low Tom 1
Pedal Hi-Hat
Mid Tom 2
Open Hi-Hat
Mid Tom 1
High Tom 2
Crash Cymbal 1
High Tom 1
Ride Cymbal 1
Chinese Cymbal
Ride Bell
Tambourine
Splash Cymbal
Cowbell
Crash Cymbal 2
Vibraslap
Ride Cymbal 2
High Bongo
Low Bongo
Mute High Conga
Open High Conga
Open Low Conga
High Timbale
Low Timbale
High Agogo
Low Agogo
Cabasa
Maracas
Short High Whistle
Long Low Whistle
Short Guiro
Long Guiro
Claves
High Wood Block
Low Wood Block
Mute Cuica
Open Cuica
Mute Triangle
Open Triangle
Shaker
Jingle Bell
Bell Tree
Castanets
Mute Surdo
Open Surdo
Applause 1
Applause 2
STANDARD
SET 1
Standard3 Kick 2
Standard3 Kick 1
Standard3 Side Stick
Standard3 Snare 1
Standard3 Hand Clap
Standard3 Snare 2
Standard3 Low Tom 2
Standard3 Closed Hi-Hat
Standard3 Low Tom 1
Standard3 Pedal Hi-Hat
Standard3 Mid Tom 2
Standard3 Open Hi-Hat
Standard3 Mid Tom 1
Standard3 High Tom 2
Standard3 High Tom 1
STANDARD
SET 3
Standard2 Kick 2
Standard2 Kick 1
Standard2 Snare 1
Standard2 Snare 2
Standard2 Closed Hi-Hat
Standard2 Pedal Hi-Hat
Standard2 Open Hi-Hat
STANDARD
SET 2
Standard4 Kick 2
Standard4 Kick 1
Standard4 Snare 1
Standard4 Snare 2
STANDARD
SET 4
Room Kick 2
Room Kick 1
Room Snare 1
Room Snare 2
Room Low Tom 2
Room Low Tom 1
Room Mid Tom 2
Room Mid Tom 1
Room High Tom 2
Room High Tom 1
ROOM SET
Hip-Hop Kick 2
Hip-Hop Kick 1
Hip-Hop Side Stick
Hip-Hop Snare 1
Hip-Hop Hand Clap
Hip-Hop Snare 2
Hip-Hop Closed Hi-Hat
Hip-Hop Pedal Hi-Hat
Hip-Hop Open Hi-Hat
HIP-HOP SET
Power Kick 2
Power Kick 1
Power Snare 1
Power Snare 2
Room Low Tom 2
Room Low Tom 1
Room Mid Tom 2
Room Mid Tom 1
Room High Tom 2
Room High Tom 1
POWER SET
• “»” indica una clave asignada a los mismos tonos que para STANDARD SET 1.
• “»” indicates a key is assigned the same tones as it is for STANDARD SET 1.
F6 89
E6 88
D6 86
C6 84
B5 83
A5 81
G5 79
F5 77
E5 76
D5 74
C5 72
B4 71
B b 4 70
A b 4 68
A4 69
F # 4 66
G4 67
E b 4 63
C # 4 61
B b 3 58
A b 3 56
F # 3 54
E b 3 51
C # 3 49
B b 2 46
A b 2 44
F # 2 42
E b 2 39
C # 2 37
B b 1 34
A b 1 32
F # 1 30
F4 65
E4 64
D4 62
C4 60
B3 59
A3 57
G3 55
F3 53
E3 52
D3 50
C3 48
B2 47
A2 45
G2 43
F2 41
E2 40
D2 38
C2 36
B1 35
A1 33
G1 31
F1 29
E1 28
E b 1 27
Key/Note Number
Número de clave/nota
Elec. Kick 2
Elec. Kick 1
Elec. Snare 1
Elec. Snare 2
Elec. Low Tom 2
Elec. Low Tom 1
Elec. Mid Tom 2
Elec. Mid Tom 1
Elec. High Tom 2
Elec. High Tom 1
Reverse Cymbal
ELECTRONIC
SET
Drum Assignment List/Lista de asignación de batería
Synth1 Kick 2
Synth1 Kick 1
Synth1 Rim Shot
Synth1 Snare 1
Synth1 Hand Clap
Synth1 Snare 2
Synth1 Low Tom 2
Synth1 Closed Hi-Hat 1
Synth1 Low Tom 1
Synth1 Closed Hi-Hat 2
Synth1 Mid Tom 2
Synth1 Open Hi-Hat
Synth1 Mid Tom 1
Synth1 High Tom 2
Synth1 Crash Cymbal
Synth1 High Tom 1
Synth1 Ride Cymbal
Synth1 Tambourine
Synth1 Cowbell
Synth1 High Bongo
Synth1 Low Bongo
Synth1 Mute Hi Conga
Synth1 Open Hi Conga
Synth1 Open Low Conga
Synth1 Maracas
Synth1 Claves
SYNTH SET 1
Synth2 Kick 2
Synth2 Kick 1
Synth1 Rim Shot
Synth2 Snare 1
Synth2 Snare 2
Synth2 Low Tom 2
Synth2 Closed Hi-Hat 1
Synth2 Low Tom 1
Synth2 Closed Hi-Hat 2
Synth2 Mid Tom 2
Synth2 Open Hi-Hat
Synth2 Mid Tom 1
Synth2 High Tom 2
Synth2 High Tom 1
Synth1 Cowbell
Synth1 Maracas
Synth1 Claves
SYNTH SET 2
Trance Kick 2
Trance Kick 1
Trance Side Stick
Trance Snare 1
Trance Hand Clap
Trance Snare 2
Trance Closed Hi-Hat
Trance Open Hi-Hat 1
Trance Open Hi-Hat 2
Trance Tambourine
TRANCE SET
Jazz Kick 2
Jazz Kick 1
Jazz Snare 1
Jazz Snare 2
JAZZ SET
Jazz Kick 2
Brush Kick
Brush Side Stick
Brush Snare 1
Brush Slap
Brush Snare 2
Brush Crash Cymbal 1
Brush Ride Cymbal 1
Brush Ride Bell
Brush Tambourine
Brush Splash Cymbal
Brush Crash Cymbal 2
Brush Ride Cymbal 2
BRUSH SET
Closed Hi-Hat
Pedal Hi-Hat
Open Hi-Hat
Ride Cymbal 1
Jazz Kick 1
Concert BD
Concert SD
Castanets
Concert SD
Timpani F
#
Timpani F
Timpani G
#
Timpani G
Timpani A
#
Timpani A
Timpani B
Timpani c
#
Timpani c
Timpani d
#
Timpani d
Timpani e
Timpani f
Concert Cymbal 2
Concert Cymbal 1
ORCHESTRA
SET
Appendix/Apéndice
Appendix/Apéndice
Rhythm List/Lista de ritmos
Group
Sequential
Number/
Number/
Número de
Número
grupo
secuencial
POPS/DANCE/ROCK
POPS
001
001
002
002
003
003
004
004
005
005
006
006
007
007
008
008
009
009
010
010
8 BEAT/16 BEAT
011
011
012
012
013
013
014
014
015
015
016
016
017
017
018
018
019
019
020
020
021
021
DANCE
022
022
023
023
024
024
025
025
026
026
027
027
028
028
029
029
ROCK
030
030
031
031
032
032
033
033
034
034
035
035
036
036
037
037
038
038
039
039
040
040
041
041
042
042
043
043
044
044
045
045
JAZZ/EUROPEAN
JAZZ
001
046
002
047
003
048
004
049
005
050
006
051
007
052
008
053
009
054
010
055
EUROPEAN
011
056
012
057
Group Name/
Nombre del
grupo
Rhythm name/
Nombre del ritmo
POP
ACOUSTIC GUITAR POP
FAST POP
FUNK POP
POP ROCK
6/8 POP
FAST SOUL
SLOW SOUL
60’s SOUL
POP SHUFFLE
Group Name/
Nombre del
grupo
LATIN I
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
LATIN II
016
017
018
019
020
021
022
023
024
025
026
HIP-HOP
DANCE POP
DISCO POP
TECHNO POP
TRANCE
MODERN R&B
MODERN DANCE
DISCO SOUL
SLOW BIG BAND
MIDDLE BIG BAND
FAST BIG BAND
ORCHESTRA SWING
SWING
SLOW SWING
JAZZ WALTZ
FOX TROT
QUICKSTEP
JAZZ COMBO 1
SCHLAGER
POLKA
Sequential
Number/
Número
secuencial
058
059
060
061
062
063
064
065
066
Rhythm name/
Nombre del ritmo
WALTZ 1
WALTZ 2
SLOW WALTZ
VIENNESE WALTZ
FRENCH WALTZ
SERENADE
TANGO
MARCH 1
MARCH 2
LATIN
STRAIGHT 8 BEAT 1
STRAIGHT 8 BEAT 2
FUNK 8 BEAT
MELLOW 8 BEAT
GUITAR 8 BEAT
8 BEAT
8 BEAT POP
OLDIES 8 BEAT
60’s 8 BEAT
16 BEAT
16 BEAT SHUFFLE
STRAIGHT ROCK
SHUFFLE ROCK
SHUFFLE BLUES
ROCK BLUES
EP BLUES
SLOW BLUES
SOFT ROCK
LATIN ROCK
SLOW ROCK
50’s ROCK
50’s PIANO ROCK
NEW ORLNS R&R
60’s ROCK
ROCK
70’s PIANO ROCK
ROCK WALTZ
Group
Number/
Número de
grupo
013
014
015
016
017
018
019
020
021
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
BOSSA NOVA
SLOW BOSSA NOVA
BEGUINE
SAMBA 1
SAMBA 2
MAMBO
RHUMBA
CHA-CHA-CHA
MERENGUE
BOLERO
SALSA 1
SALSA 2
REGGAE
POP REGGAE
SKA
082
083
084
085
086
087
088
089
090
091
092
REGGAETON 1
REGGAETON 2
CUMBIA
CALYPSO
FORRO
PAGODE
BANDA
PASILLO
ARGENTINE CUMBIA
PUNTA
BACHATA
WORLD
WORLD I
AMERICAN
001
093
DIXIE
002
094
TEX-MEX
003
095
FAST GOSPEL
004
096
SLOW GOSPEL
005
097
HAWAIIAN
SPANISH/EASTERN EUROPEAN
006
098
PASODOBLE
007
099
CAUCASIAN
008
100
RUSSIAN CHANSON 1
009
101
RUSSIAN CHANSON 2
010
102
POLISH WALTZ
ARABIC/ORIENTAL
011
103
SIRTAKI
012
104
MUS
013
105
ADANI
014
106
BALADI
015
107
KHALIJI
016
108
MALFOUF
WORLD II
INDIAN
017
109
BHANGRA
018
110
DADRA
019
111
GARBA
020
112
KEHARWA
A-5
Appendix/Apéndice
Group
Sequential
Number/
Number/
Número de
Número
grupo
secuencial
021
113
022
114
023
115
CHINESE
024
116
025
117
026
118
027
119
028
120
029
121
030
122
031
123
032
124
033
125
034
126
035
127
036
128
037
129
SOUTHEAST ASIAN
038
130
039
131
JAPANESE
040
132
COUNTRY/VARIOUS
COUNTRY
001
133
002
134
003
135
004
136
Group Name/
Nombre del
grupo
005
006
007
VARIOUS
008
009
010
011
012
Rhythm name/
Nombre del ritmo
DANDIYA
TEEN TAAL
BHAJAN
GUANGDONG
JIANGNAN
BEIJING
DONGBEIYANGGE
JINGJU
HUANGMEIXI
QINQIANG
YUJU
YAOZU
DAIZU
MIAOZU
MENGGU
XINJIANG
ZANGZU
ENKA
138
139
140
141
142
143
144
CHRISTMAS SONG
CHRISTMAS WALTZ
SCREEN SWING
SYMPHONY
STR QUARTET
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
PIANO ROCK BALLAD
90’s BALLAD
MODERN BALLAD
ELECTRIC BALLAD
SLOW BALLAD 1
SLOW BALLAD 2
R&B BALLAD
16 BEAT BALLAD
SOUL BALLAD
POP BALLAD 1
POP BALLAD 2
PIANO WALTZ BALLAD
90’s 6/8 BALLAD
6/8 BALLAD 1
6/8 BALLAD 2
ROCK BALLAD
161
162
163
164
165
166
167
168
169
170
PIANO 8 BEAT
PIANO BALLAD 1
PIANO BALLAD 2
EP BALLAD 1
EP BALLAD 2
BLUES BALLAD
JAZZ COMBO 2
JAZZ COMBO 3
RAGTIME
BOOGIE-WOOGIE
BALLAD
BALLAD
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
PIANO RHYTHMS
PIANO RHYTHMS
001
002
003
004
005
006
007
008
009
010
A-6
Group
Number/
Número de
grupo
011
012
013
014
015
016
017
018
019
020
Sequential
Number/
Número
secuencial
171
172
173
174
175
176
177
178
179
180
Rhythm name/
Nombre del ritmo
PIANO ROCK & ROLL
ARPEGGIO 1
ARPEGGIO 2
ARPEGGIO 3
PIANO MARCH 1
PIANO MARCH 2
STRIDE PIANO
WALTZ 3
WALTZ 4
WALTZ 5
NOTE
• Sequential number rhythms 171 through 180 do not
sound unless a chord is being played.
NOTA
KRONCONG
DANGDUT
MODERN COUNTRY
COUNTRY 8 BEAT
COUNTRY BALLAD
COUNTRY SHUFFLE
FINGER PICKING
COUNTRY
COUNTRY WALTZ
BLUEGRASS
137
Group Name/
Nombre del
grupo
• Los ritmos secuenciales números 171 al 180 no
suenan a menos que se ejecute un acorde.
Appendix/Apéndice
Music Preset List/Lista de preajustes musicales
Group
Name/
Nombre
del grupo
Group
Number/
Número de
grupo
Sequential
Number/
Número
secuencial
Preset Name/
Nombre de preajuste
Group
Name/
Nombre
del grupo
1
POPS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
DANCE
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
ROCK
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Soft Pop
Winter Pop
Oldies Pop
Alpine Flora
Gypsy
Rain Pop
Movie Waltz
Funky Pop
Love Pop
60’s Pop
Rising Sun
Pop Ska
Weep Blues
Cartoon
Carol
My Life
Blue Love
Xmas Pop
Shuffle Pop1
Shuffle Pop2
70’s Soul
70’s Pop
West Coast
Bossa Pop
Radio Pop
Crazy Roll
80’s Pop 1
80’s Pop 2
UK Pop 1
UK Pop 2
A Feeling
Calling
80’s EuroPop
The World
Mexican Pop
Guitar Pop
90’s Pop
Wonder
Modern Pop 1
Modern Pop 2
MdrnPopRock
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Funky Disco
Funky Clavi
Disco Soul
70’s Disco
Disco Lady
Staying
Up&Down
80’s Disco
80’sDancePop
Bb Girl
Blv Disco
Lady Jam
Into Your H
Euro Pop
Modern Dance
Trance
ShuffleDance
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
50’s Rock 1
50’s Rock 2
Heartache
EP R&R
Pop R&B
60’s Rock 1
60’s Rock 2
60’s Rock 3
60’s Rock 4
60’s Rock 5
Get Rock
Honky Rock
Wild Rock
Alligator
Movie Rock
Pop Rock
Group
Number/
Número de
grupo
Sequential
Number/
Número
secuencial
75
76
77
78
79
80
81
82
83
84
85
86
75
76
77
78
79
80
81
82
83
84
85
86
16Bt Shuffle
Heat Up
Hard Rock
Grunge Rock
Modern Rock
R&R
Piano R&R
Blues
8 Bars Blues
Riff Rock 1
Riff Rock 2
Riff Rock 3
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
Canon
Air G String
Je Te Veux
Adagio
Spring
Ave Maria
JesusBleibet
Symphony 25
Symphony 40
HungriaDance
Eine Kleine
Pathetique
Moonlight
PstlSymphony
Ode To Joy
Le Cygne
Swan Lake
Valse Fleurs
Habanera
Nocturne
Etude
FrenchCancan
FantaisieImp
Humoresque
Pavane
Hope & Glory
Moldau
FromNewWorld
Reverie
Nutcracker
Liebestraume
Gymnopedies
Jupiter
Entertainer
MapleLeafRag
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
Michael Row
GrndpasClock
Troika
AuldLangSyne
Aloha Oe
O Sole Mio
Furusato
SzlaDziweczk
Battle Hymn
Condor
ScarboroFair
Danny Boy
Greensleeves
Annie Laurie
AmazingGrace
WeWishU Xmas
Silent Night
Joy To World
YankeeDoodle
Clarnt Polka
TaRaRaBoom
Double Eagle
Blauen Donau
Yellow Rose
BeautDreamer
147
148
Satellite
Rio
Preset Name/
Nombre de preajuste
2
CLASSIC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
TRAD
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
LATIN
61
62
A-7
Appendix/Apéndice
Group
Name/
Nombre
del grupo
Group
Number/
Número de
grupo
Sequential
Number/
Número
secuencial
Preset Name/
Nombre de preajuste
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
COUNTRY
93
94
95
96
97
98
99
100
101
102
103
104
105
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
Aqua
Single
Sea Shore
Poor Pitch
Mountain
Heartless
Carnival
Mythology
Tico-Tico
Beguine
Amapola
La Paloma
Banana Boat
Peanut
A Cup Of
Jamaica
60’s Movie 1
60’s Movie 2
The No.5
Everyday
Kiss Me
El Tango
El Choclo
Reggae 1
Reggae 2
Pop Reggae 1
Pop Reggae 2
Latin Rock 1
Latin Rock 2
Modern Latin
179
180
181
182
183
184
185
186
187
188
189
190
191
US Folk 1
US Folk 2
50’s Country
70’s Country
60’s Folk
Tree
A Friend
Cowboy
Country Bld1
Country Bld2
Country Bld3
CountryWaltz
Mdrn Country
BALLAD
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
Love Ballad
R&B Ballad
Soul Ballad
Blues Ballad
MovieBallad1
MovieBallad2
MovieBallad3
Xmas Ballad
Love Me
Oldies Bld 1
Oldies Bld 2
Oldies Bld 3
Oldies Bld 4
E World
Guitar Bld 1
Guitar Bld 2
Moon Waltz
Theme
Paradise
60’s Ballad1
60’s Ballad2
Baroque Bld
FrenchBallad
Everywhere
Wonderful
70’s Ballad1
70’s Ballad2
70’s Ballad3
My Song
Peace
Without
Soundtrack
Soft Ballad
Memories
Minor Ballad
Pop Ballad 1
3
A-8
Group
Name/
Nombre
del grupo
Group
Number/
Número de
grupo
Sequential
Number/
Número
secuencial
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
Pop Ballad 2
PianoBallad1
PianoBallad2
Musical Bld
R Ballad
Love Song
80’s Ballad1
80’s Ballad2
80’s Ballad3
80’s Ballad4
Friends
Rock Ballad1
Rock Ballad2
Two Flames
90’s Ballad1
90’s Ballad2
90’s Ballad3
90’s SoulBld
I Always
6/8 Ballad
Wind Ballad
90’s 6/8 Bld
My Ballad
MdrnSoulBld1
MdrnSoulBld2
Mdrn Pf Bld
Rap Ballad
Dance Ballad
MdrnRock Bld
Slow Ballad
90’s R&B Bld
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
My Swing
Your Things
Angel
Time Passes
Piano Trio
Goodbye
Marine Dance
Vine Days
TraneChanges
RhythmChange
Swing Mood
The Big Mood
Brown Jug
Jazz Club
All Day Long
Avenue
Big Band 1
Big Band 2
Jazz Waltz 1
Jazz Waltz 2
Jazz Waltz 3
Mode Jazz
Tea Time
Welcome Home
Jazz Opera
NY City
Soul & Jazz
Loneliness
Foggy
Moon Swing
Jazz Ballad1
Jazz Ballad2
Jazz Ballad3
PatheticTrip
Night Sky
Twilight
Blues in F
Blues in Bb
Blues in C
II-V
II-V-I
Minor Blues
Preset Name/
Nombre de preajuste
JAZZ
Appendix/Apéndice
Fingering Guide/
Guía de digitación
Fingered 1, Fingered 2 Chords/
Acordes Fingered 1, Fingered 2
C
Cm
Cdim
Fingered 3, Full Range Chords/
Acordes Fingered 3, Full Range
In addition to the chords that can be fingered with
Fingered 1 and Fingered 2, the following chords also
are recognized.
Además de los acordes que se pueden digitar con
Fingered 1 y Fingered 2, también se pueden reconocer
los siguientes acordes.
C#
C
D
C
E
C
F
C
G
C
Ab
C
Bb
C
B
C
C #m Dm
C
C
Fm
C
b
b
b
Gm Am B m Ddim A 7 F7 Fm7 Gm7 A add9
C
C
C
C
C C
C
C
C
Caug *3
Csus4 *3
Csus2 *3
C7
Cm7 *3
CM7
Cm7b5 *3
C7b5 *3
C7sus4
Cadd9
Cmadd9
CmM7
NOTE
• With Fingered 3, the lowest note fingered is
interpreted as the base note. Inverted forms are not
supported.
• With Full Range Chord, when the lowest fingered is
a certain distance from the neighboring note, the
chord is interpreted as a fraction chord.
• Unlike Fingered 1, 2, and 3, Full Range Chord
requires pressing of at least three keys to form a
chord.
NOTA
• Con Fingered 3, la nota más baja digitada se
interpreta como nota base. No se pueden usar
formas invertidas.
• Con Full Range Chord, cuando la nota digitada más
baja se encuentre a cierta distancia de la nota
adyacente, el acorde se interpreta como un acorde
bitonal.
• A diferencia de Fingered 1, 2, y 3, Full Range Chord
requiere la pulsación de tres teclas como mínimo
para formar un acorde.
Cdim7 *3
C69 *3
C6 *1 *3
Cm6 *2 *3
*1 With Fingered 2, interpreted as Am7.
*2 With Fingered 2, interpreted as Am7b5.
*3 Inverted form not supported in some cases.
*1 Con Fingered 2, se interpreta como Am7.
*2 Con Fingered 2, se interpreta como Am7b5.
*3 En algunos casos no se puede usar de forma
invertida.
A-9
A-10
Root
C
C#/(Db)
D
(D#)/Eb
E
F
F#/(Gb)
G
(G#)/Ab
A
• Debido a que el rango de entrada de acordes es limitado, es posible que este modelo no admita algunos de los acordes mostrados arriba.
• Since the chord input range is limited, this model may not support some of the chords shown above.
m6
6
69
dim7
mM7
madd9
add9
7sus4
7b5
m7b5
M7
m7
7
sus2
sus4
aug
dim
m
M
Chord
Type
Chord Example List/Lista de ejemplos de acordes
(A#)/Bb
B
Appendix/Apéndice
1
2
PX-350M
dk dl dm dn do dp dq dr ds
bn bo bp bq br bs bt
ck
cm cn co cp cq cr cs ct
3 4 5 6 7 8 9 bk bl bm
• Cut this page along the dashed line so you can have it on hand as you read the contents of the manual.
• Recorte esta página por la línea de puntos para tenerla a mano mientras continúa leyendo este manual.
Key’s
Ch’s
After
Touch
Control
Change
Pitch Bender
Note ON
Note OFF
Velocity
True voice
0,32
1
5
6, 38
7
10
11
16
17
18
19
64
65
66
O
X
X
O
O
X
X
X
X
X
X
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O 9nH v = 1 - 127
X 9nH v = 0, 8nH v =**
O 9nH v = 1 - 127
X 8nH v = 64
X
X
0 - 127
0 - 127*1
Mode 3
X
1 - 16
1 - 16
Recognized
0 - 127
Mode 3
X
Default
Messages
Altered
Mode
Note
Number
1 - 16
1 - 16
Default
Changed
Transmitted
Version : 1.0
Remarks
Bank select
Modulation
Portamento Time
Data entry LSB, MSB*2
Volume
Pan
Expression
DSP Parameter0*2
DSP Parameter1*2
DSP Parameter2*2
DSP Parameter3*2
Damper
Portamento Switch
Sostenuto
** : no relation
** : sin relación
MIDI Implementation Chart
Basic
Channel
Function
Model PX-350M
:True #
Aux
Messages
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
O
O
X
O
O
X
X
X
X
X
X
O
0 - 127
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*2
Soft pedal
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4*2
DSP Parameter5*2
DSP Parameter6*2
DSP Parameter7*2
Portamento Control
High resolution velocity prefix*3
Reverb send
Chorus send
RPN LSB, MSB*2
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
*1 : Depende del tono
*2 : Si desea más información, vea Implementación MIDI en http://world.casio.com/.
*3 : Nota activada solamente
*1 : Depends on tone
*2 : For details, see MIDI Implementation at http://world.casio.com/.
*3 : Note on only
O
O
X
O
X
X
: All sound off
: Reset all controller
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
Remarks
O
O
: Clock
: Commands
System
Real Time
X
X
X
: Song Pos
: Song Sel
: Tune
O
O
O
X
X
X
X
X
X
X
X
O
O
O
O
System
Common
System Exclusive
Program
Change
67
76
77
78
80
81
82
83
84
88
91
93
100, 101
O : Yes
X : No
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
C
MA1301-B Printed in China