Samsung A517 - SGH Cell Phone User guide

SGH-A517 Series
P O R T A B L E
M O B I L E
Q U A D - B A N D
P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein St.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2007 Samsung Telecommunications America, LLC is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at:
www.samsungwireless.com/support
GH68-13418A
Printed in China
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
A517_UCGG5_WB_081407_F3
Table of Contents
Section 1: Getting Started ..........................................................................7
SIM Card Information ................................................................................................ 7
Charging a Battery ....................................................................................................9
Installing the microSD Card .....................................................................................11
Turning the Phone On or Off ....................................................................................12
Setting Up Your Voice Mail ......................................................................................12
Section 2: Understanding Your Phone .....................................................14
Features of Your Phone ...........................................................................................14
Open View of Your Phone ........................................................................................15
Closed View of Your Phone .....................................................................................17
Internal Display Layout ...........................................................................................18
Selecting Functions and Options .............................................................................20
Command Keys ......................................................................................................20
Section 3: Call Functions .........................................................................23
Making a Call ..........................................................................................................23
Answering a Call .....................................................................................................25
Recent Calls ...........................................................................................................25
Call Time ................................................................................................................28
Data Volume ...........................................................................................................28
Data Call Time ........................................................................................................29
Silent Mode ............................................................................................................29
Options During a Call .............................................................................................. 30
Section 4: Menu Navigation ....................................................................35
Menu Navigation .....................................................................................................35
Menu Outline ..........................................................................................................36
Section 5: Entering Text ..........................................................................42
Changing the Text Input Method .............................................................................42
Using the T9 Input Method ......................................................................................43
Using the Alphabet Input Method ............................................................................44
Using the Symbols Input Method .............................................................................45
Using the Numeric Input Method .............................................................................46
Section 6: Understanding Your Address Book ........................................47
Using Contacts List .................................................................................................47
Adding a New Contact ............................................................................................49
Group Settings ........................................................................................................51
Speed Dial List .......................................................................................................52
Using My Business Card .........................................................................................54
Finding My Own Phone Number ..............................................................................54
FDN List ..................................................................................................................55
Address Book Management ....................................................................................55
Using the Service Numbers .....................................................................................57
4
Section 7: Messaging ............................................................................. 58
Types of Messages .................................................................................................58
Creating and Sending New Messages .....................................................................58
Retrieving New Messages .......................................................................................64
Using Instant Messenger (IM) ..................................................................................66
Viewing the Sent Folder ..........................................................................................67
Using the Outbox ....................................................................................................68
Storing Message Drafts ...........................................................................................68
Using My Folder ......................................................................................................68
Using Message Templates ......................................................................................68
Deleting Messages .................................................................................................69
Messaging Settings ................................................................................................69
Memory Status .......................................................................................................71
Section 8: Changing Your Settings ......................................................... 72
Set Sound ...............................................................................................................72
Set Display .............................................................................................................74
Set Time & Date ......................................................................................................76
Set Phone ...............................................................................................................77
Set Calls .................................................................................................................81
Bluetooth ................................................................................................................84
Set Applications ......................................................................................................87
Reset Settings .........................................................................................................87
Memory Status .......................................................................................................88
Section 9: AT&T Mall ............................................................................... 89
Shop Tones .............................................................................................................89
Shop Games ...........................................................................................................90
Shop Graphics ........................................................................................................90
Shop Multimedia .....................................................................................................91
Shop Applications ...................................................................................................91
Shop Themes ..........................................................................................................91
MEdia Net Home .....................................................................................................92
Section 10: AT&T Music .......................................................................... 93
Music Player ...........................................................................................................93
Playing Music Transferred to the Handset ...............................................................99
Playing Music through a Stereo Bluetooth Device ....................................................99
Using Playlists .......................................................................................................100
Streaming Music ...................................................................................................102
The Buzz ...............................................................................................................103
Community ...........................................................................................................104
Music Apps ...........................................................................................................104
Table of Contents
5
Section 11: Using the Applications ........................................................105
Shop Applications .................................................................................................105
Camera .................................................................................................................106
Record Audio ........................................................................................................113
Alarms ..................................................................................................................115
Calendar ...............................................................................................................116
Notes ....................................................................................................................120
Tools ....................................................................................................................120
Timer ....................................................................................................................122
Stopwatch ............................................................................................................123
World Time ...........................................................................................................123
Section 12: MEdia Net and WAP .............................................................124
Before Connecting to the MEdia Net Homepage ....................................................124
Launching the MEdia Net Homepage ....................................................................125
Accessing the MEdia Net Site ...............................................................................127
Navigating with the WAP Browser .........................................................................127
Using Go to Messages ..........................................................................................130
Using Go to My Stuff .............................................................................................130
Section 13: Accessibility ........................................................................132
Section 14: Health and Safety Information ............................................133
Health and Safety Information ...............................................................................133
Samsung Mobile Products and Recycling ..............................................................135
UL Certified Travel Adapter ...................................................................................135
Consumer Information on Wireless Phones ...........................................................135
Road Safety ..........................................................................................................142
Responsible Listening ...........................................................................................143
Operating Environment .........................................................................................145
Using Your Phone Near Other Electronic Devices ...................................................145
Potentially Explosive Environments .......................................................................147
Emergency Calls ...................................................................................................148
FCC Notice and Cautions .......................................................................................149
Other Important Safety Information .......................................................................149
Product Performance ............................................................................................ 150
Availability of Various Features/Ring Tones ...........................................................151
Battery Standby and Talk Time .............................................................................151
Battery Precautions ..............................................................................................151
Care and Maintenance ..........................................................................................153
Section 15: Warranty Information ..........................................................154
Standard Limited Warranty ...................................................................................154
Index .........................................................................................................159
6
SIM Card Information
Section 1: Getting Started
Topics Covered
• SIM Card Information
• Charging a Battery
• Installing the microSD Card
• Turning the Phone On or Off
• Setting Up Your Voice Mail
This section describes the first steps to operating your phone.
SIM Card Information
This section describes how to start using your phone by activating your service and
setting up your voice mail
Removing the Battery
1. If necessary, power-off the phone by holding down the
key until the
power-off image displays.
2. Press down and slide the battery cover away, as shown.
3. Lift the battery up and away from the phone.
Getting Started
7
Inserting and Removing the SIM card
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use
caution when inserting or removing the card and keep all SIM cards out of reach of children.
䊳
Make sure the gold contacts of the card are face down, then slide the SIM
card into the socket.
Installing the Battery
1. Align the battery tabs with the slots at the bottom of the phone.
2. Press the battery down until it clicks into place. Make sure that the battery
is properly installed and not obstructing the SIM card before switching on
the phone.
8
Charging a Battery
3. With the battery in position on the phone, place the cover back on the
handset and slide it in until it clicks.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to
charge the battery, and use only Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper
configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your
warranty.
1. Open the side slot and plug the connector of the travel adaptor jack on the
jack on the side of the phone.
2. Plug the adaptor into a standard AC wall outlet.
Note: The following illustration shows the correct and incorrect method for connecting the charger. If the
incorrect method is attempted, damage to the accessory port will occur therefore voiding the phone’s
warranty.
Getting Started
9
3. When the phone is completely charged, unplug the adapter from the power
outlet.
4. Remove the adapter from the phone by gently pulling the connector out
and replace the plastic cover back over the open jack.
Note: During charging, you must unplug the adaptor before removing the battery from the phone to avoid
damage.
10
Installing the microSD Card
Installing the microSD Card
To add additional memory to your phone you can insert a microSD card into the side
of the phone. Use the following instructions and illustrations for proper insertion and
removal.
Note: Please note that the minimum size limit for the micro-SD is 64MB. Media Player will not be available
without this additional memory. The maximum size supported is a 2GB micro-SD.
1. Open the side slot to insert the card. Place the microSD card into the slot.
2. Push the microSD card into the slot until it clicks into place.
Warning!: Please note the proper side is facing down when inserting the card.
3. To remove the card, a quick press to release the card from the slot.
Getting Started
11
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone
sounds, the “Battery Low” message repeats at regular intervals on the display, and
the empty battery icon
blinks. The backlight turns off to conserve the
remaining battery power.
If the battery level becomes too low, the phone automatically turns off. Recharge
your battery.
Turning the Phone On or Off
1. Open the phone.
2. Press and hold the
key until the phone power-on screen displays.
Note: Do not turn on the phone when mobile phone use is prohibited.
3. If the phone asks you to enter a password, enter a password and press the
Confirm soft key or the
Password" on page 79.
key. For further details, see "Change Phone
The phone searches for your network and after finding it, the Idle screen
displays. Now, you can make or receive calls.
Note: The display language is preset to Automatic at the factory. To change the language, use the
Language menu. For more information, refer to "Set Phone" on page 77.
4. When you wish to switch off the phone, press and hold the
key until
the power-off image is displayed.
Setting Up Your Voice Mail
Note: You must store the voicemail server number before accessing the server. The service provider may
pre-populate the voicemail server number when the SIM card is activated.
To access you voice mail from your keypad, use the following steps:
1. Open the phone to access your keypad.
2. From an Idle screen, press and hold the
key.
3. Follow the voice mail prompts to access messages.
12
Setting Up Your Voice Mail
Accessing Your Voice Mail
1. In Idle mode, press the Menu soft key
to access Menu mode.
2. Highlight Recent Calls and press the
3. Highlight Voice Mail and press the
key.
key.
4. Highlight Connect to Voice Server and press the Select soft key
the
or
key.
5. When connected, follow the voice prompts from the voice mail center.
Changing the Voice Mail Name and Number
Your SIM card gives you default service number of the voice mail center. However,
you may need to change the number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key
to access Menu mode.
2. Highlight Recent Calls and press the Select soft key or the
3. Highlight Voice Mail and press the Select soft key or the
key.
key.
4. Highlight Voice Server Number and press the Select soft key or the
key.
5. Press the Options soft key, highlight Edit and press the Select soft key.
6. To edit the Voice Server Name, highlight Change Name and press
to
delete the current name, then use your keypad to enter a replacement
name.
7. To edit the Voice Mail Number, highlight Edit Number and press
to
delete the current number.
8. Enter your new Voice Server number and press the Options soft key and
highlight Save.
9. Press the Select soft key or the
10. Press the
key to save this new number.
key to return to Idle mode.
Getting Started
13
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Open View of Your Phone
• Closed View of Your Phone
• Internal Display Layout
• Selecting Functions and Options
• Command Keys
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone.
User friendly, menu driven access to features and options.
• Bluetooth
• Camera and camcorder
• Instant Messaging capability
• E-mail
• Featured applications provide alarms, calendar, calculator, record audio, converter,
timer, stopwatch, world time, tip calculator, and notes.
• Multimedia Message Service (MMS)
• Multimedia capability (with included Media player if additional memory has been
installed)
• Photo caller ID
• Speakerphone capability
• Web browser
14
Open View of Your Phone
Open View of Your Phone
The following illustrations show the main elements of your phone:
Keys
The following list correlates to the above open and front view illustration.
1. Display: This screen displays all the information needed to operate your
phone.
2. Navigation keys: This key allows you to scroll through phone menu
options and provides a shortcut to phone functions from standby mode.
3. Soft keys: Perform the functions indicated by the screen text on the
bottom of the display.
4. Music key: Allows you to access both local and web-based Music
applications.
Understanding Your Phone
15
5. Send key: Allows you to place or receive a call. In standby mode, press the
key once to access the Recent Call log. If you press and hold the key down,
you will initiate the most recent call from the Recent Call log.
6. Voice Mail key: Press and hold the
key to automatically dial your
voicemail.
7. Alphanumeric keypad: Use these keys to enter numbers, letters and
some special characters. When in Idle mode, press and hold the
key
to access your voicemail server or press and hold
to enter an
International call prefix.
8. Special Function keys: Asterisk/Shift key-enters the [ ] character for
calling features. In text mode, press to change the character input type.
Pound/Space key-enters the pound [#] character for calling features. In
text entry mode, press to enter a space between characters.
Press and hold the
to activate/deactivate the Silent mode. Press and
hold
to enter a pause between numbers.
*
9. Microphone: The Microphone allows the other callers to hear you clearly
when you are speaking to them.
10. Clear key: Deletes characters from the display when you are in text entry
mode. Deletes items when in an application. When in a main menu, press
to return to the previous menu.
11. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a
few seconds to power your phone On or Off. While in the main menu, it
returns the phone to standby mode and cancels you input. When you
receive an incoming call, press to reject call.
12. Camera key: Allows you to access both camera and camcorder
applications.
13. Menu access/Confirm key (WAP browser): When navigating through a
menu accepts the highlighted choice in the menu. If you press once in Idle
mode, the WAP browser will launch.
14. Earpiece/Speaker: Used to listen to audio and music from your phone.
16
Closed View of Your Phone
Closed View of Your Phone
Keys
The following list correlates to the open and front view illustrations.
1. Headset jack/Adapter jack: Allows you to plug in the travel adapter
(power), optional PC connection cable (data transfer), and optional headset
for safe, convenient, hands-free conversations.
2. Front LCD: Your phone has an external display on the front of the phone. It
indicates when you have an incoming call or message. It also displays
date, time, reception, battery power, and any icons associated with alerts,
such as messages, or a set alarm.
3. Volume key/Menu option key: Allows you to adjust the ringer volume in
standby mode or adjust the voice volume during a call. The volume key can
also be used to scroll up or down to navigate through the different menu
options. To mute the ringer during an incoming call, press the volume key
up or down.
When the phone is closed, press and hold these keys to toggle the display
on or off. This key is also used when the Music Player is active.
• If you are playing music and the backlight goes out, you will need to press and
hold this key to gain access to the music player keys when the flip is closed. If
the backlight is out, the keys themselves will not wake up the phone or control
the music player.
Understanding Your Phone
17
4. Camera lens: The camera lens is used for taking photos.
5. Memory Card slot: Used to install an optional microSD™ card for
additional data storage.
6. Music Player control: Used to go forward, play/pause, or go back on the
music player, using the Volume key.
Back Light
A back light illuminates the display and the keypad when you press any key or open
the phone. It turns off when no keys are pressed within a given period of time,
and/or dims the light, depending on the settings in the Backlight Time menu.
Backlight Time is determined in the Settings menu, under option 2 (Set Display), and
option 3 (Light Settings). Option 2 of Light Settings is Backlight Time. There are two
settings under Backlight Time: Main Display On (options are: 15 seconds, 30
seconds, 1 minute, 3 minutes, or 10 minutes) and Main Display Dim, a power-saving
setting (options are: Off, 15 seconds, 30 seconds, 1 minute, and 3 minutes). Turning
off the Main Display Dim leaves the Main Display at full power until it times out.
Internal Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The greater the number of
bars, the stronger the signal.
Appears when the phone is accessing services in an EDGE
network. When data is being transferred, this icon animates.
Appears when a call is in progress.
18
Internal Display Layout
Appears when there is no network coverage available. When
you are out of the service area, you cannot make or receive
voice calls.
Appears when an alarm is set on your phone.
Appears when your incoming phone calls are being forwarded
to another number.
Appears when a new voice mail has been received.
Appears when a new text message has been received.
Appears when a new multimedia message has been received.
Appears when a new E-mail message has been received.
Appears when a push-message has been received from the
WAP server. If the phone is closed, the icon displays on the front
display; when opened, the phone will automatically display the
WAP message, and the icon will display in the top part of the
display until the message is closed. WAP messages do also
appear in the Inbox with their special icon.
Appears after your memory card has been inserted.
Appears when Bluetooth wireless technology is active. When
transferring data, this icon blinks red and blue.
Appears when the phone’s profile is set to Silent using the
volume control (set to 0) or the # key shortcut. In this case, the
speaker is muted.
Appears when the phone’s profile is set to Silent. This indicates
that the phone’s incoming Alert Type is set to vibrate only. This
icon is accompanied on screen by the Vibrate icon.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Understanding Your Phone
19
Selecting Functions and Options
Your phone offers a set of functions that can be customized for your ease and
specific needs. These functions are arranged in menus and sub-menus, accessed
using the two soft keys. Each menu and sub-menu allows you to view and alter the
settings of a particular function.
In some functions, you may be asked for a password or PIN. Enter the code and
press the Select soft key or the
key.
When you access a list of options, your phone highlights the currently active option.
If, however, there are only two options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently active, so that you can select it
directly.
Selecting Options
To view the various functions and options available and to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press the Select soft key
or the
key.
• To view the next function or highlight the next option on a list, press the Down
Navigation key or the key on the left side of the phone.
• To move back to the previous function or option on a list, press the Up Navigation
key or the
key on the left side of the phone.
• To move back up one level in the menu structure, press the Back soft key.
• To exit the menu structure without changing the settings, press the
key.
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key
and the right soft key
.
20
Command Keys
Soft Keys
The roles of the soft keys vary depending on the function you are currently using; the
labels on the bottom line of the display just above each key indicate their current
role.
Left Soft Key
Some functions of the left soft key are as follows.
• In the Idle screen, press the Menu (left) soft key
to open the Menu screen.
• When in a menu mode the left soft key
function is Select.
Right Soft Key
Some functions of the right soft key are as follows.
• In the Idle screen, press the Options (right) soft key
to open the My Menu
screen. This menu contains the following:
• 1. Bluetooth
• 2: Mobile Email
• 3: Airplane Mode
• 4: Applications
• 5: Alarm
• 6: Calendar
• 7~12: Empty
• When in a menu mode, the right soft key
function is Back.
Clear Key
The CLR key
is used to erase or clear numbers, text, or symbols from the
display. You can also use
to return to a previous menu or to return to standby
mode from any menu.
Understanding Your Phone
21
• If you enter an incorrect character, briefly press
the character.
• To erase the entire sentence, press and hold
• To back up one menu level, briefly press
.
to backspace (and delete)
.
End Key
The End key
is used to turn on/off your phone, disconnect calls, and return to
the standby mode.
• Press and hold the End key
to turn on/off your phone.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu.
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls to and from your
phone.
• Press
twice in standby mode to call the most recent number.
• Press
to pick up a waiting call.
Navigation Key
Use the directional keys on the Navigation key to browse menus, sub menus, and
lists. Press the up or down navigation when jumping to highlighted links on the web.
Each key also acts as a shortcut to launch applications.
22
Making a Call
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
• Recent Calls
• Call Time
• Data Volume
• Data Call Time
• Silent Mode
• Options During a Call
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Making a Call
When the Idle screen displays, enter the area code and phone number, and press the
key.
Note: When you activate the Auto Redial option in the Settings > Set Calls > Voice Call menu, the phone
will automatically redial up to 10 times when the person does not answer the call or is already on the
phone.
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number, then press the
key.
Correcting an Entered Number
Use the following steps to correct a mis-typed entry when dialing.
1. After entering a number
• To clear the last digit displayed, press the
key.
• To clear another digit in the number, press the Left or Right Navigation key until
the cursor is immediately to the right of the digit to be cleared. Press the
key.
Call Functions
23
• To enter a missing digit press the Left or Right Navigation key until the cursor is
in position and enter the digit.
• To clear the whole display, press and hold the
key.
2. Press the
key to return to the Idle screen.
Ending a Call
When you want to finish your call, briefly press the
phone.
key or simply close the
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the
number or caller is listed in your Address Book, the name associated displays.
To access the Recent Calls menu:
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select.
2. Use the Up and Down Navigation keys to scroll through the Recent Calls
options. Choose from All Calls, Missed Calls, Calls Made, Calls
Received, Voice Mail, Speed Dial List, or Contact List.
To access the recent call from the Idle Screen:
1. Press the
key to display a list of the most recent numbers used in the
order you dialed or received them.
2. Use the Up and Down Navigation keys to scroll through the numbers until
the number you want highlights.
3. To dial the number, highlight the number and press the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM card or in the
phone’s memory. These entries are collectively called the Address Book.
Once you have stored a number in the Address Book, you can dial it by pressing a
few keys using the Speed Dial List feature.
For further details about the Address Book feature, see "Finding an Address Book
Entry" on page 48.
24
Answering a Call
Answering a Call
When a call is received the phone rings and displays the caller’s phone number, or
name if stored in the Address Book.
1. From the Idle Screen press the
key.
If the Any key option in the Settings > Set Calls > General > Call
Answer menu is activated, you can press any key to answer a call except
for the
key and the Reject soft key.
If the Flip Open option in the Settings > Set Calls > General > Call
Answer menu is activated, you can answer the call simply by opening the
phone.
Note: To reject an incoming call, press and hold the Volume keys on the left side of the phone before
opening the phone. A quick press of side volume key silences the ringer on an incoming call.
2. End the call by closing the phone or by pressing the
key.
Note: You can answer a call while using the Address Book or menu features. After ending the call, the
phone returns to the function screen you were using.
Recent Calls
The phone stores the numbers of the calls you’ve missed, made, or received in the
Recent Calls menu. If the number or caller is listed in your Address Book, the
associated name is displayed.
Viewing Missed Calls
The number of calls you have missed is displayed on both the Idle screen and the
front panel LCD. To view the number details, use the following steps:
1. If the phone is closed, open the phone.
2. Press the View soft key. The most recently missed call is displayed.
Note: If there is a voicemail sent by the same number, associated icons display and can be selected.
3. To scroll through the list of missed calls, press the Up or Down Navigation
key.
4. To move to another call type, press the Left or Right Navigation key.
Call Functions
25
Viewing the Details of a Missed Calls
To view the details of a selected missed call, use the following steps:
1. Press the View soft key. The most recently missed call is displayed.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. With the missed call selected and press the Options soft key.
4. Use the Navigation keys to highlight Details and press the
key.
Calling Back a Missed Call
To call back a missed call number, use the following steps:
1. Press the View soft key. The most recently missed call is displayed.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. Press either Options soft key and highlight Call Back.
4. Press the Select soft key or the
key.
Adding a Missed Call to your Address Book
To call back a missed call number, use the following steps:
1. Press the View soft key. The most recently missed call is displayed.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. Press either Options soft key and highlight Save to Address Book.
4. Press the Select soft key or the
key.
5. Select the location of your Address Book:
• Phone: This option allows you to save the missed number to your Address Book
stored on the phone.
• SIM: This option allows you to save the missed number to your Address Book
stored on the optional SIM card.
For further details about the Address Book feature, see "Adding a New Contact" on
page 49.
26
Recent Calls
Sending a Message to a Missed Call
To send a text message or attachment to a missed call entry, use the following
steps:
1. Immediately after missing a call, press the View soft key.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. Press the Options soft key and select Send Message.
4. Select from a Text Message or a Multimedia Message and press either
the Select soft key or the
key.
5. At the “New Message” screen, use the Alphanumeric keys to type in a
message or press the Options soft key to select from the following
options:
• Insert: allows you to insert items from the Text Templates, Contact List, or
Favorites to the message.
• Add Media: allows you to add a Picture, Animation, or a Melody to the
message.
• Attach: allows you to a Business Card, Appointment, Anniversary,
Miscellaneous, or a Task to the message.
• Save to: allows you to save the message to your Drafts, or My Folder.
• Select Language: allows you to change the text input language. Choose from
English, Français, or Español.
• Input Method: allows you to change the text input mode. Choose from ab, Ab,
AB, T9ab, T9Ab, T9AB, Numeric, and Symbols. For more information, see
"Changing the Text Input Method" on page 42.
• Text Style: allows you to choose the text style for the message. Select the Text
Size, Text Style, Bold or Italic and the Alignment.
• Back: exits the message and returns you to the Recent Calls listing.
6. When you are done with your message, press the Send To soft key.
Deleting a Missed Call
To delete a missed call entry, use the following steps:
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key and highlight Delete. Choose from Selected or
All. Press the Select soft key, or the
key.
3. At the “Delete?” prompt, press either the Yes soft key to confirm deletion
or No to cancel.
You can press the
key at any time to exit the Missed Call feature.
Call Functions
27
Call Time
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select or the
key.
2. Highlight Call Time and press the Select soft key or the
key.
3. Use the Up and Down Navigation keys to view the following information:
• Last Call Time: shows the length of time for the last call.
• Total Sent: shows the total length of time for the calls made.
• Total Received: shows the total length of time for the calls received.
4. Select the desired option, press the Reset soft key. At the “Are You Sure?”
prompt, select Yes or No.
Note: The first time you access the reset options menu, you will be prompted to create and Confirm a
password by pressing the OK.
5. Enter the password and confirm the reset with the OK soft key to reset the
selected option.
6. Press the Back soft key or the
key to end.
Data Volume
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select.
2. Highlight Data Volume and press the Select soft key or the
key. Data
Volume refers to the amount of data (volume) to and from the phone.
Choose from the Recent Volume or Total Volume.
3. Use the Up and Down Navigation keys to view the following information for
both Recent Volume and Total Volume:
• Sent: shows the size of the last data packet (measured in KB - kilobytes) sent by
the phone since the last time this counter was reset.
• Received: shows the size of the last data packet (measured in KB - kilobytes)
received by the phone since the last time this counter was reset.
• Total: shows the size of the total data packet (measured in KB - kilobytes) which
have been sent by the phone since the last time this counter was reset.
4. Press the Back soft key or the
key to end.
28
Data Call Time
Data Call Time
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select.
2. Highlight Data Call Time and press the Select soft key or the
key.
3. Use the Up and Down Navigation keys to view the following information:
• Last Data Call: shows the time used for the last data call sent or received since
the last time this counter was reset.
• Total Data Call: shows the total time used to send or receive data since the last
time this counter was reset.
4. Press the Back soft key or the
key to end.
Silent Mode
Silent mode is convenient when you wish to stop the phone from making noise, in a
theater for example. Silent mode has two settings: Mute and Vibrate. The default is
Vibrate.
Setting Silent Mode Option
1. From the Idle Screen, press
highlight Settings and press
Menu. Use the navigation keys to
Select.
2. Highlight Set Sound and press the Select soft key or the
3. Highlight Silent Mode and press the Select soft key or the
key.
key.
4. Use the Up and Down Navigation keys to select either Vibration or Mute as
the Silent mode option. Press
Save.
Note: Setting the Silent Mode option does not set the phone to Silent Mode. Setting the phone to Silent
mode may only be done using one of the following methods.
Setting the Phone to Silent Mode
Your phone can only be put into silent mode using one of the two methods following:
• In Idle mode, press and hold the
key until the phone displays the message
“Silent Mode Activated.” The Silent/Vibrate
or Silent/Mute
icon is
displayed on the screen. If you selected the Vibration option, the phone vibrates.
• With the phone open and in Idle mode, press and hold the volume key down until
Ring Volume is at 0. The phone displays the message “Silent Mode Activated.” The
Silent/Vibrate
or Silent/Mute
icon is displayed on the screen.
Call Functions
29
In Silent mode, your phone’s speakers are muted. The phone will either vibrate and
light up the external LCD display or just light the external LCD display depending on
the settings of the Silent Mode option.
To reactivate the previous sound settings, press and hold the
key or the
volume key again until “Silent Mode Deactivated” displays. The Silent mode icon no
longer displays.
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the Volume keys on the
left side of the phone.
Press the
level.
key to increase the volume level and the
key to decrease the
In Idle mode, you can also adjust the ringer volume using these same keys.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress, if your network supports this service.
To put a call on hold:
1. While on a call, press the left Options soft key.
2. Highlight Hold and press the Select soft key. The call is on hold.
3. You can reactivate the call whenever you want, by pressing the Resume
soft key.
To make a call while you have a call in progress:
1. Place the current call on hold using the previous procedures.
2. Press the Options soft key and choose from the New Call.
3. Enter the new phone number that you wish to dial and press the
key.
– or –
Look it up in the Address Book by pressing the Contact List soft key and
highlight the entry by using the Up or Down Navigation key.
4. Press the
key to dial the second call. Once connected, both calls are
displayed on the screen.
When you have an active call and a call on hold, you may switch between the two
calls, changing the one on hold to active and placing the other on hold.
30
Options During a Call
To switch between the two calls:
1. Press the left soft key Options.
2. Highlight Swap and press the Select soft key. The current call (#2) is
placed on hold and the previous call on hold (#1) is reactivated so that you
can continue conversing with that person.
3. Press the
key to end the currently selected call.
To end a call:
1. Press the left soft key Options.
2. Highlight End Held Call and press the Select soft key.
3. Press the
key to end the remaining call.
Using the Speakerphone Key
1. During a call, press the speakerphone key
.
2. Use the volume keys (located on the left side of your phone) to adjust the
volume.
Important!: For more information, see "Responsible Listening" on page 143.
In Call Options
During a call, press the Options soft key to access the following:
• Hold: Places the current call on hold.
• New Call: Places the current call on hold and then allows you to enter and dial
another number.
• Contact List: Allows you to access your Contact List information.
• Message: Allows you to create and send a new Text message or a message stored
in My Messages.
• Calendar: Launches the Calendar to view dates.
• Mute Keypad Tone: Silences/mutes the key tones when on the call. To turn this
feature off (unmute the keypad), return to this option and select Send Keypad
Tone.
• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you
have selected. These DTMF tones are sent as a group. The DTMF tones are the
tones used in phones for tone dialling, sounding when you press the number keys.
This option is helpful for entering a password or an account number when you call
an automated system, like a banking service.
Call Functions
31
If you have are in a multi-party call, the following options in addition to the previous
list also display.
• Swap: Places the current call on hold and then activates the previous call.
• Join: Joins all of the calls you have established with your phone (both active and
on hold).
• End Held Call: Terminates the call currently placed on hold.
When you want to finish, end each call normally by pressing the
key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the Mute Keypad Tone
option is selected, tones of the keys, which allows you to press keys without hearing
key tones during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send Keypad
Tone option must be selected.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person
cannot hear you.
Example: You wish to say something to person in the room, but do not want the person on the phone to
hear you.
During a call, to switch the microphone off temporarily:
1. Press the
Mute. Unmute is displayed.
2. Press the
Unmute to deactivate the Mute function.
Searching for a Number in Address Book
You can search for a number in Contact List during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Contact List option.
3. Press the Select soft key or the
key.
4. Highlight the Address Book entry by using the Up or Down Navigation key.
- or 5. Enter the first few letters of the contact into the Search field which then
highlights the closest match in the Address Book list.
6. To view the highlighted entry, press the
32
Options soft key.
Options During a Call
For further details about the Address Book feature, see "Finding an Address Book
Entry" on page 48.
Call Waiting
The Call Waiting feature allows you to answer an incoming call while you have a call
in progress, if this service is supported by the network, and you have set the
Settings > Set Calls > Voice Call > Call Waiting menu to Activated. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key or press the Accept soft key to answer the incoming
call. The first call is automatically put on hold.
2. To switch between the two calls, press the left Options soft key and
highlight Swap.
To end a call on hold:
1. Press the Options soft key.
2. Select the End Held Call option or press the
To end the current call, press the
key.
key.
Note: Join: Joins all of the calls you have established with your phone (both active and on hold).
Swap: Places the current call on hold and then activates the previous call.
3-Way Calling (Party Line)
The 3-Way or Multi-Line feature allows you to answer a series of incoming calls,
place them on hold, and if this service is supported by the network, join all of the
calls together. You are notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key or the Accept soft key to answer the first incoming
call.
2. Press the
key or the Accept soft key to answer the consecutive
incoming calls. The previous call is then automatically put on hold.
The options at this point are:
• Swap
• Join
• Contact List
• Message
• Calendar
Call Functions
33
• Mute Keypad Tone
• Send DTMF
• End Held Call
3. To Join the first two calls, press the left Options soft key, highlight Join,
and press the
key.
4. Once multiple calls are joined, the following options are available:
• Hold
• Split
• Remove
• New Call
• Contact List
• Message
• Calendar
• Mute Keypad Tone
• Send DTMF
5. To end the current multiparty call, press the
34
key for each call joined.
Menu Navigation
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
Menus and sub-menus can be accessed by scrolling through them using the
Navigation keys or by using the shortcut keys.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Scroll using the Navigation keys to reach a main menu, Settings for
example.
3. Press the Select soft key or the
key to enter the menu.
4. If the menu contains sub-menus, Set Phone for example, you can access
them by first highlighting the option and then by pressing the Select soft
key or the
key. If the menu you have selected contains further
options, repeat this step.
5. To scroll through these menus, press either the Up or Down Navigation key
or the Volume key (located on the left side of your phone).
6. Press the Select soft key, or the
key to make your selection.
7. To return to the previous menu level, press the Back soft key, the
key.
8. To exit the menu without changing the settings, press the
key.
Menu Navigation
35
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and options can be quickly
accessed by using their shortcut numbers. In Menu mode, Main Menus can be
accessed by pressing the number keys (1 to 0) corresponding to their location on the
screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Set Phone
4. Press the
key for Language to display the list of available languages.
5. Highlight an option and press the
key to select a language.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option:
1: AT&T Music
1: Music Player
2: Shop Music
3: Streaming Music
4: The Buzz
5: Community
6: Music Apps
2: Messaging
1: Create New Message
1: Text Message
2: Multimedia Message
2: Inbox
3: Mobile Email
4: IM
1: AIM
1: Sign On
2: Saved Conversations
3: Offline Conversations
4: Preferences
5: Help
2: Windows Live
36
Menu Outline
1: Sign In
2: Saved Conversations
3: Preferences
4: Help
3: Yahoo!
1: Sign In
2: Saved Conversations
3: Preferences
4: Help
5: Sent
6: Outbox
7: Drafts
8: My Folder
9: Templates
10: Delete All
11: Messaging Settings
12: Memory Status
3: Recent Calls
1: All Calls
2: Missed Calls
3: Calls Made
4: Calls Received
5: Voice Mail
1: Connect to Voice Server
2: Voice Server Number
6: Speed Dial List
7: Contact List
8: Delete All
9: Call Time
10: Data Volume
1: Recent Volume
2: Total Volume
11: Data Call Time
4: MEdia Net
1: MEdia Net Home
2: Favorites
3: Enter URL
4: Browser Profiles
Menu Navigation
37
5: Clear Cache
5: AT&T Mall
1: Shop Tones
2: Shop Games
3: Shop Graphics
4: Shop Multimedia
5: Shop Applications
6: Shop Themes
7: MEdia Net Home
6: Games & Apps
1: Shop Games
2: Shop Applications
3: My Games & Apps
7: My Stuff
1: Ringtones / Audio
1: Shop Tones
2: Downloaded Audio
3: Record Audio
4: Recorded Audio
5: Default Ringtones
6: Memory Card**
2: Graphics
1: Shop Graphics
2: Downloaded Graphics
3: Take Photo
4: My Photos
5: Default Wallpapers
6: Memory Card**
3: Video
1: Shop Videos
2: Downloaded Videos
3: Record Video
4: My Video Clips
5: Memory Card**
4: Music
1: Shop Music
2: My Music
3: Memory Card**
38
Menu Outline
5: Applications
1: Camera
2: Record Audio
3: Alarms
4: Calendar
5: Notes
6: Tools
6: Other Files
1: Other Files
2: Memory Card**
8: Address Book
1: Contact List
2: Add New Contact
1: Phone
2: SIM Card
3: Group
4: Speed Dial List
5: My Business Card
6: Own Number
1: Empty
2: Empty
3: Empty
4: Empty
7: FDN List
8: Management
1: Default Saving
2: Copy All to
3: Sort by Contacts
4: Delete All
5: Memory Status
9: Service Number*
9: Settings
1: Set Sound
1: Incoming Call
2: Keypad Tone
3: Message Tone
4: Power On/Off Tone
5: Silent Mode
Menu Navigation
39
2: Set Display
1: Main Display
1: Wallpaper
2: Info Display
3: Theme
4: Menu Style
5: Pop up List Menu
6: Dailing Display
7: Calendar
2: Front Display
1: Clock
2: My Image
3: Screen Slogan
3: Light Settings
1: Brightness
2: Backlight Time
3: Front LCD Contrast
3: Set Time & Date
4: Set Phone
1: Language
2: Shortcuts
3: Security
1: Lock Phone
2: Lock SIM Card
3: Check PIN Code
4: Lock Applications
5: Set FDN Mode
6: Change Phone Password
7: Change PIN Code
8: Change PIN2 Code
4: Greeting Message
5: Network Selection*
6: Airplane Mode
7: USB Settings
5: Set Calls
1: General
1: Show My Number
2: Call Answer
40
Menu Outline
3: Call Status Tones
4: Alerts on Call
2: Voice Call
1: Call Forwarding
2: Call Barring*
3: Call Waiting
4: Auto Redial
6: Bluetooth
1: Turn Bluetooth On
2: My Devices
3: My Phone’s Visibility
4: My Phone’s Name
5: Secure Mode
6: Bluetooth Services
7: Set Applications
1: IM Settings
2: Messaging Settings
3: Browser Settings
4: Camera Settings
5: Record Audio Settings
6: Calendar Settings
7: Address Book Settings
8: Reset Settings
9: Memory Status
1: Shared Memory
2: Messaging
3: My Stuff
4: Address Book
* Shows only if supported by your SIM card.
** Shows when a memory card is inserted.
Menu Navigation
41
Section 5: Entering Text
Topics Covered
• Changing the Text Input Method
• Using the T9 Input Method
• Using the Alphabet Input Method
• Using the Symbols Input Method
• Using the Numeric Input Method
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Input Method
The Text Input option switches the key entry functions from an T9 Alphabet,
ABC (Alphabet), Numeric Mode, and Symbols Mode.
T9 Input Method (T9ab, T9Ab, and T9AB)
This input method allows you to enter words with only one keystroke per letter. Each
key on the keypad has more than one letter; for example, pressing the 5 key can
enter J, K, or L. However, the T9 method automatically compares the series of
keystrokes you make with an internal linguistic dictionary to determine the most
likely word, thus requiring far fewer keystrokes than the traditional Alphabet mode.
The T9ab method makes all characters lowercase. The T9Ab method makes the
initial character an uppercase while the remaining characters are left as lowercase.
The T9AB method all characters uppercase.
ABC (Alphabet) Input Method (ab, Ab, and AB)
This input method allows you to enter letters by pressing the key labeled with the
letter you want. Press the key once, twice, three, or four times until it displays.
The ab method makes all characters of the word lowercase. The Ab method makes
the initial character an uppercase while the remaining characters are left as
lowercase. The AB method makes all characters of the word uppercase.
42
Using the T9 Input Method
Numeric
This mode allows you to enter numbers.
Symbols
This mode allows you to enter symbols, such as punctuation marks.
Changing the Text Input Mode
1. To change the text input mode while in a message, press the
2. Highlight Input Method and press the
key.
key. The default mode is Abc.
3. Choose from the following options:
ab: all lowercase
Ab: initial capitalization
AB: all uppercase
T9ab: completed words are all lowercase
T9Ab: completed words are initial uppercase
T9AB: completed words are all uppercase
Numeric: configures the keypad to be used only to enter numbers into a
text message.
Symbols: provides an on screen table which allows you to select from the
list of available symbols associated to each keypad.
Note: Press and hold the
key to access symbols. Press the number key corresponding to the symbol
you want to enter. Use the Up and Down Navigation keys to scroll through the available symbols.
Press the Cancel soft key to exit.
Using the T9 Input Method
T9 Predictive Text input method is based on a built-in dictionary.
Enter a Word in T9 Mode
1. In T9 method, begin entering a word by pressing the 2 to 9 keys. Press
each key only once for each letter. The built-in dictionary lists words that
match the keystrokes you have entered.
2. Example: To enter “Hello”, press
,
,
,
,
The word that you are typing appears in the display. It may change with
each key that you press.
3. Enter the whole word before editing or deleting the keystrokes.
Entering Text
43
4. When the word displays correctly, go to step 5.
If the word doesn’t display correctly, press the
key to display
alternative word choices for the keys that you have pressed.
Example: Both “Of” and “Me” have the
used choice first.
and
keys. The phone displays the most commonly
5. Insert a space by pressing the
key and start entering the next word.
Add a New Word into the T9 Dictionary
This feature allows you to add new words to the phone’s current dictionary. When
you are in a field that allows characters to be entered (such as in a text message),
you will notice the text input mode indicator on the display.
1. After pressing the keys corresponding to the word you want to add, press
the
key to display the alternative words.
2. When the last alternative word is displayed, Spell displays. Press the Spell
soft key.
3. Enter the word you want to add using the ABC mode.
4. Press the Add soft key or the
key.
The word is added to the T9 dictionary and becomes the first word for the
associated keypress series.
Note: This feature may not be available for some languages.
• To enter periods, hyphens, colons, or parenthesis, press and hold the
key.
T9 mode applies grammar rules to ensure that correct punctuation is used.
• To shift case in T9 mode, use the
key. There are 4 cases: Initial capital,
Capital lock, Lower case, and Numeric.
• You can move the cursor by using the Left and Right keys. To delete letters, press
the
key. Press and hold the
key to clear the display.
Using the Alphabet Input Method
To use the ABC Alphabet input method use the
text.
to
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
• And so on
44
keys to enter your
Using the Symbols Input Method
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or
a different letter on the same key, just wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
Keys
Using the Symbols Input Method
The Symbol input method enables you to insert symbols and punctuation marks into
text.
1. To enter symbol mode press and hold the
key.
2. Use the Navigation keys to select an on screen symbol group.
3. To select a symbol from that group, press the corresponding number key.
4. To clear the symbol(s), press the
key. When the input field is empty,
this key returns the display to the previous mode.
5. To return to your message, press the OK soft key or the
key.
Entering Text
45
Using the Numeric Input Method
The Numeric mode enables you to enter numbers into a text message.
1. To change the text input mode while in a message, press the
2. Highlight Input Method and press the
3. Highlight Numeric and press the
key.
key.
4. Press the keys corresponding to the digits you want to enter.
46
key.
Using Contacts List
Section 6: Understanding Your Address Book
Topics Covered
• Using Contacts List
• Adding a New Contact
• Group Settings
• Speed Dial List
• Using My Business Card
• Finding My Own Phone Number
• FDN List
• Address Book Management
• Using the Service Numbers
This section allows you to manage your daily contacts by storing their name and
number in your Address Book. Address Book entries can be sorted by name, entry, or
group.
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot
location are saved. To save additional information for a particular contact, such as notes, e-mail,
dates, etc., it is important to save that Contact into your phone’s onboard memory.
Using Contacts List
Dialing a Number from Address Book
Once you have stored phone numbers in the Address Book, you can dial them easily
and quickly by either using their SIM card location number or by using the Search
field to locate the entry.
Note: The default Address Book entries are: Check Bill Balance - *225#, Directory Assistance - 411,
Music ID - #43, Pay My Bill - *729, View My Minutes - *646#, Voice Connect - *08, *Now - *669.
Understanding Your Address Book
47
Finding an Address Book Entry
You can store phone numbers and their corresponding names onto your SIM card
and phone’s onboard memory. They are physically separate but are used as a single
entity, called the Address Book.
Depending on your particular SIM card, the maximum number of phone numbers the
SIM card can store may differ.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or the
3. Highlight Contact List, and press the Select soft key or the
key.
key.
4. Enter the first few letters of the name.
The Address Book entries are then listed, starting with the first entry
matching your input.
5. To select a different entry, press the Up or Down Navigation key until the
entry you want is highlighted.
6. Once you have found the entry, press the
key to dial the number, or
press the Options soft key to access the Address Book entry options.
Address Book Entry Options
While accessing any Address Book entry, press the Options soft key to use the
options for the entry.
The following options are available:
• View: provides you with details about that contact entry. Press the Back soft key to
return to the Address Book listing.
• Edit: allows you to edit the properties of an entry such as: Name, Category, Group,
or location. Press the
key to save your changes.
• Send Message: allows you to send a text message or a multimedia message to
the selected entry.
• Add New Contact: allows you to add a new entry to either your Phone or SIM card.
• Call: allows you to call a currently selected entry.
• Copy to SIM Card/Copy to Phone: allows you to copy the Selected or All entries.
Press the
key to save your entry.
• Send Business Card: allows you to send a message to the selected entry which
contains the information from their Address Book entry which you have on file.
This can be sent as either a Text Message, Multimedia Message or via
Bluetooth.
48
Adding a New Contact
• Assign Speed Dial: allows you to set the speed dial key for this entry.
• Delete: allows you to delete either a selected address book entry or multiple
entries from a target location such as the Phone and/or SIM card.
• Select Language: allows you to select the language. Choose from English,
Français, or Español.
Adding a New Contact
Use the following procedures to store a new contact to your Phone or SIM Card.
Storing a Contact in the Contact List
1. When the Idle screen displays, enter the phone number.
2. Press the Options soft key.
3. Scroll to Save by pressing the Up or Down key and press the Select soft
key or the
key.
4. Choose the target location for the entry (Phone or SIM Card), press the
Select soft key or the
key.
5. To save to phone memory, select Phone and either the option of New or
Update.
• The New allows you to choose from Mobile, Home, Office, Fax, or Other.
• The Update option allows you to enter the phone number as an option on an
existing entry.
6. Press the Options soft key and highlight Save or press the
key to
save the information for this entry.
Copying an Existing Number to the SIM Card
Note: Copying an existing contact entry can be done to the SIM card or to the phone. Which option depends
on the Default Saving option you selected see "Default Saving" on page 55.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or the
3. Highlight Contact List, and press the Select soft key or the
key.
key.
4. Select the Address Book entry you wish to copy to the SIM and press the
Options soft key.
5. Select Copy to SIM Card, choose whether to copy the selected entry or all
entries to the SIM, and press the Select soft key or the
key.
Understanding Your Address Book
49
6. Press the soft Save key or the
key to save your entry and return to a
screen which then lists the entries in your Contact List, with an icon
indicating whether they are stored on the SIM card (
) or the phone
(
).
7. To access the available options for this entry, press the Options soft key:
• View: allows you to view the selected entry. Press the
key.
• Edit: allows you to edit the properties of an entry such as: Name, Number, or
Location. Press the
key to save your changes.
• Send Message: allows you to send a text message or a multimedia message to
the selected entry.
• Add New Contact: allows you to add a new contact to the Contact List.
• Call: dials the number listed for the selected contact.
• Copy to Phone: allows you to copy the Selected or All entries to the phone.
Press the
key to save your entry.
• Send Business Card: allows you to send a message to the selected entry
containing your business card information. This can be sent as either a Text
Message, Multimedia Message or Bluetooth.
• Assign Speed Dial: allows you to set the speed dial key for this entry.
• Delete: allows you to delete either a selected address book entry from a target
location such as the Phone and/or SIM card, or all entries.
8. To return to the Idle screen, press the
key.
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot
location are saved. To save additional information for a particular contact, such as notes, e-mail,
dates, etc., it is important to save that Contact into your phone’s onboard memory.
Copying an Entry to the Phone
You can copy a SIM entry to the Phone by using the Duplicate option. When you copy
entries to the phone, duplicate entries are created.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
3. Highlight Contact List, press the Select soft key or the
key.
key.
4. Select an entry which currently resides on the phone.
• If the associated entry has a SIM location icon (to the left of the entry), then the
entry already exists on the SIM card. This is the type you can duplicate.
• If the entry’s associated Group image does not have a SIM location icon, then
this entry currently exists on the phone.
5. Press the Options soft key, highlight Copy to Phone, and press the Select
soft key or the
key.
50
Group Settings
6. When you are finished, press the
key to return to Idle mode.
Note: Options are available for phone entries that are not available when stored to the SIM card. For details
see "Storing a Contact in the Contact List" on page 49.
Dialing a Number from the SIM Card using the Location
Number
1. In Idle mode, enter the location number for the phone number you want to
dial and press the
key.
The contact entry information is displayed.
2. Press the Left or Right Navigation key to find other numbers on the list.
3. Press the Dial soft key, the
key, or the
selected the number you want to call.
key when you have
Group Settings
Groups are a method of categorizing members of your Contact List into logical units.
This can be useful when you want to send a text or multimedia message to several
people at the same time.
Note: All members of a group must already be in your Contact List.
Creating a Caller Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or the
key.
3. Scroll to Group by pressing the Up or Down Navigation key.
4. If the group you want to create is not one of the default groups, select
Options by pressing the Select soft key or the
key.
5. Highlight Add New Group, and press the Select soft key or the
key.
6. Enter the name of the group and press the Save soft key.
Note: The Group has to be created and saved before Contacts may be added to it.
7. Highlight name of the group, and press the
key. The empty group
listing displays.
8. Press the Add soft key. Your Contact List displays. Select the contact(s) to
add, and press the
key to select each one.
Understanding Your Address Book
51
9. Press the Options soft key, and choose the Add option. All contacts
selected will be added to the group.
10. When you are finished, press the
key to return to Idle mode.
Editing a Caller Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Group by pressing the Up or Down Navigation key.
4. Scroll through the list of groups by pressing the Up or Down Navigation
key.
5. Highlight the target group entry and press the Options soft key. The
following options are then available:
• View: shows the contacts assigned to this group.
• Add New Group: allows you to add a new group category.
• Edit: allows you to the group name.
• Send Message: allows you to send a text or multimedia message to the
members of a group.
• Delete Group: allows you to delete the group.
6. Once you’ve made your changes, press the Options soft key, select Save
and press the Select soft key or the
key.
7. When you are finished, press the
key to return to Idle mode.
Speed Dial List
Once you have stored phone numbers from your Address book list, you can set up to
8-speed dial entries and then dial them easily whenever you want, simply by
pressing the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the
appropriate key.
Setting Up Speed Dial Entries
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select.
2. Highlight Speed Dial List by pressing the Up or Down Navigation key, and
press the Select soft key or the
key.
3. Select the key in which you wish to assign the speed-dialing number (from
the 2 to 9 keys), and press the Options soft key or the
52
key.
Speed Dial List
Note: Memory location 1 is reserved for your Voice mail server number.
4. Highlight Add and press the Select soft key or the
key. You can
choose to assign a number from your Address Book or FDN contacts.
5. Highlight Contact and press the Select soft key or the
key.
• Select the Address Book entry you would like to add by pressing the Up or
Down key and press the
key to save the entry.
6. Highlight FDN Contact and press the Select soft key or the
key.
• Select the FDN entry you would like to add by pressing the Up or Down key and
press the
key to save the entry.
Changing a Number Assigned to a Key
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select.
2. Highlight Speed Dial List by pressing the Up or Down Navigation key, and
press the Select soft key or the
key.
3. Select the key you wish to change and press the Options soft key.
4. Highlight Change, select the location of the new entry (Contact or FDN
Contact), and press the
key.
5. Highlight Contact and press the Select soft key or the
key.
• Select the Address Book entry you would like to change by pressing the Up or
Down key and press the
key to save the entry.
6. Highlight FDN Contact and press the Select soft key or the
key.
• Select the FDN entry you would like to change by pressing the Up or Down key
and press the
key to save the entry.
7. Once you have selected your entry (by name or number), press the Select
soft key or the
key to confirm the change.
8. When you are finished, press the
key to return to Idle mode.
Deleting Speed Dial Entries
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select.
2. Highlight Speed Dial List by pressing the Up or Down Navigation key, and
press the
key.
3. Select the key you wish to clear and press the Options soft key.
4. Select Remove and at the “Remove?” prompt press the Yes soft key to
confirm your deletion or the No key to cancel.
Understanding Your Address Book
53
5. When you are finished, press the
key to return to Idle mode.
Using My Business Card
The My Business Card option allows you to keep a current list of phone numbers and
contact methods for yourself.
Creating a My Business Card
1. From the Idle Screen, press
Menu. Use the navigation keys to
highlight Address Book, and press
Select.
2. Highlight My Business Card by pressing the Up or Down Navigation key,
and press the
key.
3. Enter your first name, last name, mobile number, home number, office
number, fax number, extra contact number, and email address.
4. When you are finished, press the Options soft key, and select Save. This
will save your business card to your Address Book.
5. Press the
key to return to Idle mode.
Sending My Business Card
1. From the Idle Screen, press
Menu. Use the navigation keys to
highlight Address Book, and press
Select.
2. Highlight My Business Card by pressing the Up or Down Navigation key,
and press the
key.
3. Highlight the Send via option by pressing the Up or Down Navigation key,
and press the
key. Three options display: Text Message, Multimedia
Message, and Bluetooth.
4. Highlight the message type option by pressing the Up or Down Navigation
key, and press the
key. Your business card is automatically attached
to the message, and you are put in the enter message mode.
5. Enter your message, and select the Send To option.
6. Either type in the phone number, or use the Up or Down Navigation key to
select the recipient from your Contacts List.
Finding My Own Phone Number
This function is a memory aid, which you can use to check your own phone number
if you need to do so.
54
FDN List
You can assign a name to each of your own phone numbers registered on your SIM
card. You can also edit the names and numbers. Any changes made here do not in
any way affect the actual subscriber numbers on your SIM card.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select Own Number by pressing the Up or Down key and press the Select
soft key or the
key.
FDN List
FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your
outgoing calls to a limited set of phone numbers. When this feature is enabled, you
can make calls only to phone numbers stored in the FDN list on the SIM card.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select FDN List by pressing the Up or Down key and press the Select soft
key or the
key.
4. The FDN List screen displays. If there are no FDN numbers assigned, press
the Options soft key and select Add.
5. You must enter your PIN2 password. This number is provided to you by
your Service Provider.
6. Enter the FDN number and select from the following options:
• Disable: you can call any number.
• Enable: you can only call the phone numbers stored in the SIM FDN list.
Address Book Management
You can copy, delete, and view the address book entries for the Phone and SIM Card
entries on your phone.
Default Saving
This option allows you to set the default location to which address book entries are
saved. The options are: Phone, SIM Card, or Ask On Saving.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Highlight Default Saving, press the Select soft key or the
key.
4. Highlight the option you wish to set as the default, and press the Select
soft key or the
key.
Understanding Your Address Book
55
Copy All Address Book Entries
This option allows you to choose where you copy all of your Address Book entries, to
the Phone memory or the SIM card. If you choose the Phone option, the entries listed
on the SIM card display. If you choose the SIM Card option, the entries in the phone
memory display. You can then choose whether to deselect any of the entries using
the
key, then Copy All entries, Check All entries, Uncheck All entries, or
Select Language.
Sort by Contacts
This option allows you to sort your Contact List by first or last name.
Deleting All of the Address Book Entries
You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Highlight Contact List and press the Select soft key or the
key.
4. Press the Options soft key, highlight Delete, and press the Select soft key
or the
key.
5. Highlight All and press the Select soft key or the
key to launch the
Delete All screen.
6. Highlight All and press the
key.
You can remove the check mark by pressing the
key again. Selecting
All places a checkmark adjacent to every entry in the list.
7. Press the Delete soft key to delete the entries from the selected memory
location.
8. At the Delete? confirm screen, press the Yes soft key to continue, or the
No soft key to cancel.
9. Enter the password and press the OK soft key or the
10. When you are finished, press the
key.
key to return to Idle mode.
Checking the Memory Status
You can check how many names and numbers are stored in the Address book, in
both SIM card and the phone memory. You can also see the capacity of both
memories.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
56
key.
Using the Service Numbers
3. Highlight Management, press the Select soft key or the
key.
4. Select Memory Status by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
5. When you are finished viewing your phone’s Memory Status, press the
key to return to Idle mode.
Using the Service Numbers
You can view the list of Service Numbers (SDN), if supported and assigned by your
service provider. These numbers include emergency numbers, customer service
numbers and directory inquiries.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select Service Number, by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Scroll through the numbers by using the Up or Down Navigation key.
5. To dial the number displayed, press the
key.
Note: This menu is available only when your SIM card supports Service Numbers.
Understanding Your Address Book
57
Section 7: Messaging
Topics Covered
• Types of Messages
• Creating and Sending New Messages
• Retrieving New Messages
• Using Mobile Email
• Using Instant Messenger (IM)
• Using the Outbox
• Storing Message Drafts
• Using My Folder
• Using Message Templates
• Deleting Messages
• Messaging Settings
• Memory Status
This section describes how to send or receive different types of messages. It also
includes the features and functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
• Text Messages
• Multimedia Messages
• Email Messages
• IM Messages
Creating and Sending New Messages
Text Messages
The Short Message Service (SMS) allows you to send and receive short text
messages to and from other mobile phones. To use this feature, you must subscribe
to your service provider’s message service.
58
Creating and Sending New Messages
The Text Message icon ( ) displays when you have received new text messages.
When the memory is full, an error message displays and you cannot receive any new
messages. Use the Delete option in each message box to delete obsolete messages,
or use the Delele All option to clear all message boxes.
1. When the Idle screen displays, press the Menu soft key.
2. Select Messaging and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Create New Message and
press the Select soft key or the
key.
4. Highlight Text Message and press the Select soft key or press the
key.
5. Begin creating your text message. You can alter the text input method of
the text by changing the Input Method, see "Changing the Text Input
Method" on page 42.
6. When you have finished writing your message, press the Options soft key.
Choose from the following options:
• Insert: allows you to insert a predefined Text template, Contact List, or favorite
web address into the message.
- Text Templates: allows you to insert one of the preset message templates to
the text, such as (Out of Office, I’m in a meeting.).
- Contact List: allows you to add the contact information for an entry from
Address Book directly to your message.
- Favorites: allows you to add a web address from your Favorites list of Internet
sites to the message.
• Add Media: allows you to add a Picture, Animation (such as an emoticon), or
Melody to your message.
- Picture: allows you to attach a picture stored in your Picture folder.
Note: If a Text Message is sent with an attached Picture, the message will be sent as an Multimedia
Message.
- Animation: allows you to attach a piece of animation (such as an emoticon)
stored in your Animation folder.
- Melody: allows you to attach a melody, stored in the Melody folder .
• Attach: allows you to add either a file, card, or other information such as a
calendar entry, task, or note.
- Business Card: allows you to insert the Business Card information for an entry
from the Contact List directly to your message as an attached file. If you want to
send your own business card, see "Sending My Business Card" on page 54.
Messaging
59
- Appointment: allows you to insert an Appointment entry from your calendar
directly to your message as an attached file.
- Anniversary: allows you to insert an Anniversary entry from your calendar
directly to your message as an attached file.
- Miscellaneous: allows you to insert a Miscellaneous entry from your calendar
directly to your message as an attached file.
- Task: allows you to insert an entry from your calendar tagged as a Task directly
to your message as an attached file.
• Save to: allows you to save the message to your Drafts folder or to My Folder.
• Select Language: allows you to temporarily change the input language used to
create your message.
• Input Method: allows you to change the method used to input data into your
message, such as text, numbers, and symbols. For more information, refer to
"Entering Text" on page 42.
• Text Style: allows you to choose the Text Size, Text Style, Bold, Italic, and
the Alignment.
• Back: allows you to return to the active message.
7. Press the Send To soft key to enter the recipient information.
8. Enter either a phone number directly, or select from your Contact List by
pressing the
key for the following options:
• Contact List: allows you to insert additional recipients from your Contact List by
using your Up and Down Navigation keys to select those entries you wish to add.
- Press the
key to place a checkmark next to those entries you wish to add.
- Once you have selected the desired entries, press the Add softkey to return to
the message.
• Recent Recipients: allows you to choose from a brief list of recently dialed or
emailed contacts. Press the
key to add a selected number to your
message’s recipients list field. This entry can later be appended prior to sending
the message.
• Group: allows you to insert a Group from your Address Book by using your Up
and Down Navigation keys to select the group or groups you wish to add.
• FDN Contacts: allows you to insert numbers assigned to your Fixed Dial
Network (FDN) group.
• Save to: allows you to save the text message to your Drafts folder or to My
Folder.
9. Send the message to the selected recipients by either pressing the Send
soft key.
60
Creating and Sending New Messages
Multimedia Message
The Multimedia Message icon ( ) displays when you have received new
multimedia messages. When the memory is full, an error message displays and you
cannot receive any new messages. Use the Delete option in each message box to
delete obsolete messages.
1. When the Idle screen displays, press the Menu soft key.
2. Select Messaging and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Create New Message and
press the Select soft key or the
key.
4. Highlight Multimedia Message and press the Select soft key or the
key.
5. Highlight the following options with the Up or Down Navigation key and
press the
key. To exit an option selected without sending a message,
press the Back soft key.
6. Using the Up or Down Navigation key, highlight Subject and press the
Options soft key and highlight Add to add a enter a subject line to the new
message. Press the Options soft key and highlight Save to save the new
subject. Press the Options soft key to view the following options:
• Subject
- Add/Edit: allows you to add/edit a subject line for the message.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
- Add Page: allows you to add additional pages to your message.
- Edit Page: allows you to edit duration of the page, and to move the page forward
or backward in the message.
- Attach: allows you to attach a file to the message such as a: Business Card,
Appointment, Anniversary, Miscellaneous, Task, Notes, or Other Files.
- Send Settings: allows you to select the Delivery Report, Read Reply, Priority,
Expiry, and Delivery After.
7. Using the Up or Down Navigation key, highlight Graphic or Video and
press the Options soft key and highlight Add Graphic. The Add Graphic
option allows you to launch the camera to Take Photo, select a photo from
your My Photos folder, add a graphic from Downloaded Graphics folder,
or (if you are using a memory card) add a graphic stored on the Memory
Card. Press the Options soft key to view the following options:
• Graphics
Messaging
61
- Add Graphic: allows you to add a taken a photo, add from My Photos, or a
downloaded image to the message.
- Add Video: allows you to add a recorded video, add from My Video Clips, or a
downloaded video to the message.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
- Add Page: allows you to add additional pages to your message.
- Edit Page: allows you to edit the text on the message.
- Attach: allows you to attach a file to the message such as a: Business Card,
Appointment, Anniversary, Miscellaneous, Task, Notes, or Add Other Files
- Send Settings: allows you to select the Delivery Report, Read Reply, Priority,
Expiry, and Delivery After.
8. Using the Up or Down Navigation key, highlight Audio and press the
Options soft key and highlight the Add option to add an audio file.
Highlight Record Audio to launch the Audio Recorder or select Recorded
Audio to select a audio previously recorded. Select Downloaded Audio to
choose from previously downloaded audio files. Press the Options soft key
to view the following options:
• Audio
- Add: allows you to add a newly recorded audio file, a previously recorded audio
file, or a downloaded audio file to the message.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
- Add Page: allows you to add additional pages to your message.
- Edit Page: allows you to edit the Duration, Move Page Forward, or Move Page
Back settings.
- Attach: allows you to attach a file to the message such as a: Business Card,
Appointment, Anniversary, Miscellaneous, Task, Notes, or Other Files.
- Send Settings: allows you to select the Delivery Report, Read Reply, Priority,
Expiry, and Delivery After.
9. Using the Up or Down Navigation key, highlight Message and press the
Options soft key and highlight Add to create the new text message. Enter
your message. Press the Options soft key and highlight Save to save the
new message. (See ‘Text Messages” on page 58 for descriptions of all
Options). Once the message is saved, press the Options soft key to view
the following options:
• Message
- Edit: allows you to edit the text message portion of the multimedia message.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
62
Creating and Sending New Messages
- Add Page: allows you to add additional pages to your message.
- Delete Page: allows you to delete pages to your message. This option is
available only after a page has been added.
- Edit Page: allows you to edit the Duration, Move Page Forward, or Move Page
Back settings.
- Attach: allows you to attach a file to the message such as a: Business Card,
Appointment, Anniversary, Miscellaneous, Task, Notes, or Other Files.
- Send Settings: allows you to select the Delivery Report and Read Reply, and set
Priority, Expiry, and Delivery After levels.
- Remove Message: allows you to remove the current saved message. Only
available after a message is saved, and any added pages have been deleted.
Options available will vary slightly, depending on exactly which option you
are performing (e.g. Add Page, Edit).
Note: You may also add a Business Card to the Multimedia Message as an attachment.
10. Press the Send To soft key to enter a contact. Press the Options soft key to
choose from:
• Contact List
• Group
• FDN Contacts
• Recent Recipients (using either number or email address)
• Common Address
• Send
• Save to the Drafts or My folder
• Change Recipients to Cc or Bcc
11. When you have finished entering destination numbers, press the Send soft
key.
Locating a Message
1. In Idle mode, press the Menu soft key and highlight Messaging.
2. Press the Select soft key or the
key.
3. Highlight Inbox and press the Select soft key. The message list opens.
The following icons indicate the message type.
•
: indicates a new Voice message (This is an icon not identifiable in the
Inbox but rather under "Idle Pop up" or the Icons in the Icon area.)
•
: indicates a new Text message. A text message may also be send via
email.
•
: indicates a new Multimedia message
Messaging
63
Retrieving New Messages
While text messages from other phones are delivered directly to your phone,
Multimedia messages are stored in the Inbox of the message server and the server
will alert you to new messages. Therefore you need to retrieve new messages to
your phone and read them on the phone.
Viewing a Text Message
1. In Idle mode, press the Menu soft key and highlight Messaging.
2. Press the Select soft key or the
key.
3. Highlight Inbox and press the Select soft key or the
key. The
message list opens. The icons on the left of the number indicates the
message type.
•
: indicates Text Message
•
: indicates Multimedia Message
4. Select a message on the list and press the
key. The message content
is then displayed. The following options are available for text messages:
• View: allows you to view the message, which includes the date and
time received.
• Reply: allows you to reply to the message via Text Message or Multimedia
Message.
• Call Back: allows you to dial the originating message number.
• Forward: allows you to forward the message.
• Delete: deletes the message.
• Move to My Folder: moves the message from the Inbox to the My Folder.
• Move to Phone/Move to SIM: If a message is stored in the SIM card, it is
saved to the phone’s memory. If a message is stored in the phone’s memory it is
saved to the SIM card.This option is not available if the message has been
moved to the My Folder location.
• Add to Block List: adds the number the message was sent from to the blocked
list.
• Extract Address: allows you to save the recipient or sender’s number and
URL, Email addresses or phone numbers from the message text.
• Print via Bluetooth: allows you send the file to a Bluetooth printer for printing.
• Lock: allows you to lock the message to prevent deletion.
5. Press the Back soft key to return to the list.
6. Press the Up or Down key to scroll through the message screen.
7. When you have finished, press the
64
key.
Retrieving New Messages
Retrieving and Viewing a Multimedia Message
When a new Multimedia Message comes in, the display shows the Multimedia
Message icon (
) and a text notification along with the sender’s number.
1. Press the View soft key to view brief information about the message, such
as the sender’s number, the message size, and the subject.
If you want to view the message later in the Inbox, press the Back soft key.
2. To retrieve from the Inbox, highlight Message Box, and press the Select
soft key or the
key.
3. Highlight the multimedia message and press the
key.
4. Press the Options soft key for the following options:
•
•
•
•
•
•
•
View: allows you to view the message.
Reply via: allows you to reply via Text Message or Multimedia Message.
Reply to All: allows you to reply to all who were sent the message.
Call Back: allows you to call back the sender of the Multimedia Message.
Forward: allows you to forward the message to another number.
Delete: allows you to deleted the selected or multiple messages.
Move to My Folder: allows you to move the message in its entirity to your My
Folder in the Message Box.
• Sort by: allows you to sort the messages by Date, Read/Unread, Sender, Type,
Size, or Subject.
• Lock: allows you to lock the message.
• Properties: allows you to see the properties of the message, including the date
and time sent, the sending number, and the recipients.
5. Once you select the View option, the message is retrieved and displayed.
Press the Options soft key or the
key to access the following options:
• Reply via: allows you to reply via Text Message or Multimedia Message.
• Reply to All: allows you to reply via Text Message or Multimedia Message.
• Call Back: allows you to call back the sender of the Multimedia Message.
• Forward: allows you to forward the message to another number.
• Delete: allows you to delete the selected message or all messages.
• Move to My Folder: allows you to move the message in its entirity to your My
Folder in the Message Box.
• Extract Address: allows you to return a message to the sender’s address or
send them a Text Message or a Multimedia Message. You can also Paste the
sender into your Phone Book or SIM Card.
• Save Media: allows you to save the message as a graphic or a Video, Audio,
vCard, vCalendar, Notes, or Other file.
• Lock: allows you to lock the message to prevent deletion.
Messaging
65
• Properties: allows you to see the properties of the message, including the date
and time sent, the sending number, and the recipients.
6. To scroll through the message, press the Up or Down key.
7. When you have finished, press the
key.
Using Mobile Email
Take your email with you! With Mobile Email you can check your Yahoo!® Mail, AOL®,
AIM, Windows Live Hotmail, AT&T Yahoo!®,BellSouth, and Other providers quickly
and easily.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select Mobile Email and press the Select soft key or the
key.
key.
4. Use the Navigation keys to select an e-mail carrier of your choice and
press the Select soft key or the
key.
5. Use the Navigation keys to select which domain your personal account
uses (e.g., "@hotmail.com") and press the Select soft key or the
key.
6. Type in your personal Email address (e.g., "silverfox2"), then enter your
account's Password and press the Sign In soft key. You will be connected
to your account's Inbox and contacts, where you can send and receive
key to toggle off/on the Remember Password box, if
emails. Use the
applicable.
Using Instant Messenger (IM)
The Instant Messaging function allows you to send and receive instant messages
using AIM, Windows Live, and Yahoo communities. You must first create a default
community account before accessing it on your phone. To access your default
community session settings, use the following steps:
Default Community Settings
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select IM and press the Select soft key or the
66
key.
key.
Viewing the Sent Folder
4. Select an IM community and press the Select soft key or the
key.
This is the service that will load when you press the IM soft key. Once you
have selected the IM community, that community is automatically selected
for all subsequent entries. Your options then are: Sign In, Saved
Conversations, Preferences, and Help.
5. Use the Navigation keys to highlight your IM community, and press the
Select soft key or the
key to save your selection.
Setting a New Default Community
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select IM and press the Select soft key or the
key.
key.
4. Select Preferences, and press the Select soft key or the
key.
5. Select Default Community, and press the Select soft key or the
key.
6. Use the Navigation keys to highlight your new community option, and press
the Select soft key or the
key to save your selection. This new
service will load when you press the IM soft key.
Signing into your IM Account
Although each account type differs, the initial sign in procedure is common to all
supported types. Before beginning the sign in procedure, you must complete the
previous procedures for selecting your default IM Community.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select IM and press the Select soft key or the
key.
key.
4. Select Sign In/On and press the Select soft key or the
key.
5. Use the Navigation keys to select each log in field and then use the keypad
to enter the appropriate information.
6. Press the Options soft key. Highlight Sign In and press the Select soft key
or the
key.
Viewing the Sent Folder
The Sent folder allows you to verify that messages were sent, and the date and time
they were sent. It also shows you the size of the individual message that was sent.
The options available for messages in the Sent folder are:
• Forward: allows you to forward the message to another number.
Messaging
67
• Delete: allows you to delete the message from the Sent folder
• Move to My Folder: allows you to move the message to your phone storage in My
Folder.
• Move to SIM: allows you to move the message to the SIM card.
• Print via Bluetooth (when available): allows you to print a copy of the sent
message using Bluetooth.
• Lock: allows you to lock the message.
Using the Outbox
The Outbox allows you to view whether or not a message has been sent. An outgoing
message, especially a multimedia message which may take longer to send, will
appear in the Outbox until the send activity is complete.
Messages that remain unsent due to unavailability of service are stored in the
Outbox until service is available.
Storing Message Drafts
You can use the Drafts folder of the Message Box to store text or multimedia
messages that are not ready to send. Once you access the message in the Draft
folder, you can complete the message and send it, you can delete it, move it to My
Folder, move it to SIM, sort it by the message parameters, or lock it.
Using My Folder
The My Folder option of the Message Box allows you to save a message, removing it
from the Inbox. Once saved to My Folder, you can view it, delete selected entries or
multiple entries, sort the messages, or lock the message.
Important!: Messages saved in My Folder should be regularly reviewed and either moved to external
memory or deleted.
Using Message Templates
Your phone has message templates to allow you to retrieve them when creating a
message. You can change the templates as your preferences or send a message
immediately.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and press the Select soft key or the
3. Highlight Templates and press the Select soft key or the
key.
key.
4. Highlight a template and press the Options soft key to access the following
options:
68
Deleting Messages
• Send via: allows you to send a Text message or a Multimedia message using
the template.
• Edit: allows you to change the template.
• Delete: deletes the selected template.
5. When you have finished, press the
key.
Deleting Messages
You can delete the messages in each message folder(s) individually or all at one
time. You can also delete all of your messages at one time.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and press the Select soft key or the
key.
3. Highlight either Delete All and press the Select soft key.
4. Using the Up or Down Navigation key and press the
key to select the
message folder(s) you want to empty.
To delete all of the messages in all folders, select All Messages.
5. Press the Delete soft key. At the “Delete?” pop-up, press the
key to
mark files with protection to be deleted or press the Yes soft key to delete.
6. When you have finished, press the
key.
Messaging Settings
You can set up various options for using messaging services.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and highlight Message Settings. Press the Select soft
key or the
key.
3. Select the type of messages for which you want to change (Text Messages,
Multimedia Messages, IM, and Push Messages). Press the Select soft key
or the
key.
Text Message
The following options are available:
• Send Settings: allows you to set the following options:
• Service Center: allows you to alter the service center access number.
• Email Gateway: allows you to alter the gateway information.
• Block Number: allows you to block a number from being received on your handset.
Messaging
69
Multimedia Message
The following options are available:
• Send Settings:
• Delivery Report: when this option is enabled, the network informs you whether or
not your message has been delivered.
• Read Reply: when this option is enabled, your phone sends a request for a reply
along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry: select the length of time you wish the message to remain on the MMS
server.
• Delivery After: you can set a time delay before the phone sends your messages.
• Receive Settings: you can specify the category of messages you want to retrieve.
Allows you to set the following:
• Anonymous Reject: allows you to automatically reject messages with a category
of anonymous.
• Ads allowed: allows you to automatically reject messages with a category of
advertisement.
• Report Allowed: allows messages with a report.
• Send Read Report: sends a message acknowledging the report has been read.
• Message Reception: allows you to set the message receipt options. Choose from
Manual, Automatic, or Reject.
• Profiles: you can select a connection profile to be used for sending and receiving
Multimedia messages.
• Current Profile: allows you to select an option for sending a text message. Choose
from the following options:
• AT&T MMS
• Profile 2
• Profile 3
• Profile 4
• Profile 5
• Profile Settings
• AT&T MMS
• Profile 2
• Profile 3
• Profile 4
• Profile 5
• Block Number: allows you to enter numbers to be blocked from your handset.
70
Memory Status
• Message Class: allows you to set the message class default for your messages.
Choose from Text Only, Small Imaging, Moderate Imaging, Small Video, and
Moderate Video.
• Creation Mode: allows you to set the creation mode for the message. Choose from
Warning, Free, and Restricted.
Please contact your service provider for further details.
IM
The following options are available:
• Default Community: allows you to select the default Instant Message community.
• AIM
• Windows Live
• Yahoo!
• Favorite IDs: allows you to set up your log-in ID(s) for your Instant Message
community.
• Power On Sign In: allows the automatic sign on to Instant Message when the
phone is powered on.
• Community Settings: allows you to turn off/on Automatic Sign-In and to select
Sound Settings.
• IM Profiles: allows you to select on of five Instant Message profiles.
Push Message
The following options are available:
• Receive: you can specify whether to turn push message reception enable to
Always, Never, or Text Message-C Specific.
• Service Center: you can specify whether to load this service.
Memory Status
You can check the amount of the memory being used and the memory remaining for
multimedia messages.
The display shows the total space including the used and free space. You can also
view how much space is currently occupied by each message box.
Messaging
71
Section 8: Changing Your Settings
Topics Covered
• Set Sound
• Set Display
• Set Time & Date
• Set Phone
• Set Calls
• Bluetooth
• Set Applications
• Reset Settings
• Memory Status
This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.
Set Sound
You can customize various sound settings.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Sound and press the Select soft key or the
key. The
following options are available. Use the Down Navigation key to scroll to
and set options:
Incoming Call
This menu allows you to make a selection from the following categories:
• Shop Tones: allows you to access the internet to shop for a new ringtone.
• Alert Type: allows you to set the alert default. Choose from Melody, Vibration,
Vibration Then Melody, or Vibration And Melody.
• Ring Tone: allows you to select from the preloaded ringtones, downloaded audio,
and recorded audio.
72
Set Sound
• Volume: allows you to set the volume for your ringer to sound when receiving an
incoming call.
䊳
Press the Left or Right Navigation key to make selection. Press the Save
soft key or the
key to save changes.
Keypad Tone
This menu allows you to select the tone and volume when you press the keypad.
1. Use the Navigation keys to select from On/Off and Key Tone (Beep,
Xylophone).
2. Use the Navigation keys to increase or decrease the Volume.
3.
Press the Save soft key or the
key to save changes.
Message Tone
This menu allows you to select how the phone informs you that a new Text Message
or Multimedia Message has been received.
For each message tone, the following options are available:
• Message Tone: you can select a message tone.
• Alert Type: you can select a type of message alert.
• Off: the phone does not use a Message tone.
• Melody: the phone sounds the selected message tone.
• Vibration: the phone vibrates.
• Vibration Then Melody: the phone vibrates then plays the Message Tone.
Press the Left or Right Navigation key to make selection. Press the Save soft key or
the
key to save changes.
Power On/Off Tone
This menu allows you to enable/disable the melody that the phone sounds when it is
switched on and off.
1. Press the Up or Down Navigation key to make selection. Press the Save
soft key or the
key to save changes.
2. To turn off the sound, select Off.
Changing Your Settings
73
Silent Mode
This menu item allows you to select what mode your phone will go in when you
press and hold the
key, or use the Down key on the volume until volume is 0.
You can choose Vibration or Mute.
When Vibration is selected your phone will only vibrate.
When Mute is selected your phone will not make a sound or vibrate.
1. Press the Up or Down Navigation key to make selection.
2. Press the Save soft key or the
key to save changes.
Set Display
In this menu, you can change various settings for the display or backlight.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
3. Select Set Display and press the Select soft key or the
key.
key.
The following options are available. Use the Up or Down Navigation key to
scroll to and set options:
Main Display
• Wallpaper: allows you to select the wallpapers.
• Main Display: allows you to set the wallpaper for the main display. Press the
key to access this option. Choose from the Shop Graphics, Downloaded Graphics,
My Photos, or the Default Wallpapers. Use the Left or Right Navigation keys to view
key to make your selection.
all wallpapers. Press the Select soft key or the
• Menu Background: press the
key to enable the Menu Background
Transparency option. The Transparency option allows you to adjust the amount of
picture shown. Choose from 10% - 90% transparency. Press the Save soft key.
• Info Display: allows you select the settings for the following:
• Text Position: allows you to select the position of the text displayed in Idle mode.
Press the Left or Right Navigation keys to make your selection. Choose from Top,
Bottom, or Off. Press the Save soft key or the
key to make your selection.
• Text Style: allows you to set the text style for your handset. Choose from Normal,
Outline, or Shadow. Press the Save soft key or the
key to make your
selection.
• Text Color: allows you to select the color of the text to be displayed on the Idle
screen. Press the Left or Right Navigation keys to make your selection. Choose
from White, Yellow, Blue, Green, Red, or Black. Press the Save soft key or the
key to make your selection.
74
Set Display
• Theme: allows you to choose from 2 patterns for your handsets’ theme.
• Menu Style: allows you to choose from Grid Menu or List Menu styles.
• Pop up List Menu: allows you to turn On or Off the pop-up menus for options with
multiple sub menus.
• Dialing Display: Allows you to set the Font Size, Font Color, and the Background
Color.
• Calendar: allows you to turn On or Off the calendar display on the main display.
Front Display
The front display allows you to set the following settings
• Clock: connects you to the Internet and sets the clock time.
• My Image: allows you to set an image to display on the front display.
• Screen Slogan: shows the title displayed on your handset. This text can be
changed by the user. Press the Options soft key to select Save, Select Language,
or Cancel.
Light Settings
Brightness
You can adjust the display brightness for the LCD to see it better in different lighting
conditions.
䊳
Press the Left or Right Navigation key or press the Volume keys to adjust
the brightness. Press the Save soft key or the key to save selection.
Backlight Time
In this menu, you can select the length of time for the Main LCD backlight On and the
Main LCD Dim.
• Main Display On: Settings available are: 15 seconds, 30 seconds, 1 minute, 3
minutes, and 10 minutes. Press the Save soft key or the
key to save
selection.
• Main Display Dim: Settings available are: 15 seconds, 30 seconds, 1 minute, 3
minutes, and Off. Press the Save soft key or the key to save selection.
Front LCD Contrast
You can adjust the display brightness for the Front LCD to see it better in different
lighting conditions.
1. Press the Left or Right Navigation key or press the Up or Down Volume
keys to adjust the brightness.
2. Press the Save soft key or the key to save selection.
Changing Your Settings
75
Set Time & Date
This menu allows you to change the current time and date displayed. You can also
find out what time it is in another part of the world.
Note: Before setting the time, you must specify your time zone in the World time menu.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Time & Date and press the Select soft key or the
key.
Use the Down Navigation key to scroll to and select from the following
options:
• Time Zone Updating: allows you to choose from the following options,
Automatic, Manual Only, or Prompt First. Press the Save soft key or the
key to save your selection.
• Home Zone: allows you to set your time zone for the handset. Press the
to access the different time zones. Press the Save soft key or the
key to
save your selection.
• Time: allows you to enter the current time using your keypad. Press the Save
soft key or the
key to save your selection.
• AM/PM: allows you to manual set whether the time set is AM or PM. Use the
Left or Right Navigation key to select AM or PM. Press the Save soft key or the
key to save your selection.
• Date: allows you to enter the current date using your keypad. Press the Save
soft key or the
key to save your selection.
Tip: If Manual Only is selected, are the Time Format and Date Format options enabled.
• Time Format: allows you to change the time format to 12 hours or 24 hours.
Use the Left or Right Navigation key to select Time Format. Press the Save soft
key or the
key to save your selection.
• Date Format: enter the date format you wish to use when display the date.
Choose from MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD. When you have
made your selection, press the Save soft key or the
key to save your
selection.
Note: Automatic updates of time and date does not change the time you have set for alarm settings or
calendar memos.
76
Set Phone
Set Phone
To customize the settings of your phone use the following steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Using the Up or Down Navigation key highlight Set Phone and press the
Select soft key or the
key. The following options are available:
Language
You can select a display language. When the language option is set to Automatic,
the language is automatically selected according to the language of the SIM card
used. Depending on your country, service provider, or the software version of the
phone, the Automatic option may not display. **
䊳
Press the Save soft key or the
key to save selection.
Shortcuts
Navigation Keys
The Shortcuts menu option allows you to change the options assigned to the
Navigation Keys. Press the Options soft key to Change the assigned shortcut key.
Options List
The Options List allows you to set different options to access quickly using the
Options soft key. Each possibility on the list has three options: Change, Remove, or
Remove All. The following options are listed:
• Bluetooth
• Mobile Email
• Airplane Mode
• Applications
• Alarm
• Calendar
• Empty: there are six empty slots that can be defined for other options.
• Choose an empty slot and press the
key (or by pressing the Options soft
key then selecting Define), the display changes to the Main Menu where you
can select one of the icons to associate with that empty slot.
• Once selected, select the Assign soft key to assign the selection or press the
key to search for more options.
Changing Your Settings
77
Security
The Security feature enables you to restrict the use of your phone by the others and
to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Security and press the Select soft key or the
key.
The following options are available. Use the Up or Down Navigation key to
scroll to and set options:
Lock Phone
When the Phone lock feature is enabled, the phone is locked and you must enter the
4- to 8-digit phone password each time the phone is switched on.
To change the phone password, see "Change Phone Password" on page 79.
Once the correct password has been entered, you can use the phone until you
switch it off.
The following options are available:
• Off: you are not asked to enter the phone password when you switch on the phone.
• On: you are required to enter the phone password when you switch on the phone.
Lock SIM Card
When the Lock SIM Card feature is enabled, your phone only works with the current
SIM. You must enter the SIM lock code to unlock the SIM so you can use a different
SIM card.
Once you have entered the lock code, you are asked to confirm your password.
Reenter your password and press the OK soft key.
The following options are available:
• Off: you are not asked to enter the phone password when you switch on the phone.
• On: you are required to enter the phone password when you switch on the phone.
Check PIN Code
When the Check PIN Code feature is enabled, you must enter your PIN each time you
switch on the phone. Consequently, any person who does not have your PIN cannot
use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
78
Set Phone
The following options are available:
• Off: the phone connects directly to the network when you switch it on.
• On: you must enter the PIN each time the phone is switched on.
Lock Applications
Using this menu, you can lock the following categories:
• All
• IM
• Messaging
• Recent Calls
• Ringtones/Audio
• Graphics
• Video
• Music
• Calendar
• Task
• Notes
• Address Book
Once you have locked the contents, you must enter the phone’s password to access
the associated menus.
Set FDN Mode
Set FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to
restrict your outgoing calls to a limited set of phone numbers.
The following options are available:
• Off: you can call any number.
• On: you can only call phone numbers stored in Phone book.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Change Phone Password
The Change Phone Password feature allows you to change your current phone
password to a new one. You must enter the current password before you can specify
a new one.
Once you have entered a new password, you are asked to confirm it by entering it
again.
Changing Your Settings
79
Change PIN Code
This feature allows you to change your current PIN, provided that the PIN Check
feature is enabled. You must enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.
Change PIN2 Code
The Change PIN2 Code feature allows you to change your current PIN2 to a new one.
You must enter the current PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Greeting Message
This menu allows you to set a greeting to be displayed briefly when the phone is
switched on.
For details about entering characters, see "Using the Alphabet Input Method" on
page 44.
Network Selection (SIM Dependent)
The Network Selection feature enables you to automatically or manually select the
network used when roaming outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement
between the two.
To indicate to automatically or manually select the network to be used when
roaming:
1. From the Set Phone menu screen, select Network Selection.
2. Press the Up or Down key until the appropriate option highlights, then
press the Select soft key or the
key.
If you select Automatic, you are connected to the first available network
when roaming.
If you select Manual, go to step 3.
3. Press the Up or Down key until the network you want highlights and then
press the Select soft key or the
key.
The phone will scan for that network and you will be connected.
80
Set Calls
Airplane Mode
The Airplane Mode turns your handset off for incoming and outgoing calls.
USB Settings
Your phone can connect to a PC via the USB cable (sold separately). The USB
Settings allow your phone to be configured to launch a default application when an
active USB connection is detected.
Note: The Bluetooth feature must first be disabled before initiating a USB connection with the phone. Prior
to connecting the USB cable to the phone, install the latest version of the Studio application. This
application installs the necessary USB drivers onto your machine.
1. Install the USB drivers onto your computer by installing the latest PC Studio
application.
2. In Idle mode, press the Menu soft key to access Menu mode.
3. Select Settings and press the Select soft key or the
key.
4. From the Set Phone menu screen, select USB Settings and press the
Select soft key or the
key.
5. Highlight Ask on Connection and press the Save soft key or the
key.
• Ask on Connection: requires the phone to present a “Ask on Connection” popup which requires you to assign a default USB application.
• PC Studio: sets PC Studio to launch as the default application when a USB
connection is detected.
• Media Player (MTP): sets the Media Player to launch as the default application
when a USB connection is detected. This is the default application. For more
information, refer to "Playing Music Transferred to the Handset" on page 99.
• Mass Storage: sets phone to act as mass storage device.
6. Return to the Idle screen and use the USB adapter cable to connect the
handset to the target PC. When an active connection has been established,
a USB icon (
) appears on the phone.
7. From the Ask on Connection screen select the desired connection option
and press the Select soft key or the
key.
Set Calls
This menu option provides the options to answer a call, display a number, alerts and
notifications during calls.
Changing Your Settings
81
General
Show My Number
You can prevent your phone number from being displayed on the phone of the
person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Set by Network: the default setting provided by the network is used.
• Hide Number: your number does not display on the other person’s phone.
• Show Number: your number is sent each time you make a call.
䊳
Press the Save soft key to apply changes.
Call Answer
The following options are available to answer a call on your handset.
• Flip Open: allows you to answer the call when you open the phone.
• Any Key: allows you to answer the call when you press any key.
1. Highlight an option and press the
key.
2. Press the Save soft key to save the selection.
Call Status Tones
The Call Status Tone options are used to notify you for the Minute Minder or the
Connection Tone.
1. Use the
key to enable or disable these functions.
2. Press the Save soft key to save the selection.
Alerts on a Call
Use this option to turn On or Off the Alerts on Call option. Press the
press the Save soft key to save the settings.
key and
Voice Call
Call Forwarding
This network service enables incoming calls to be rerouted to the number that you
specify.
Example: You may wish to forward your business calls to a colleague while you are on holiday.
82
Set Calls
To set your call forwarding options:
1. From the Voice Call menu, select Call Forwarding.
2. Select a call forwarding option by pressing the Up or Down key and then
press the Select soft key or the
key. The following options are
available:
• Forward always: allows you to forward Voice Calls . Highlight an option and
press the Select soft key, then select Activate and enter the forwarding
number. To deactivate, follow the same steps, select Deactivate and press the
Select soft key.
• Busy: allows you to forward Voice Calls to the designated number instead of
your voice mail number if you are on another phone call.
• No Reply: allows you to forward Voice Calls to the designated number instead
of your voicemail number when there is no answer on your phone. You can
choose the time setting from 5, 10, 15, 20, 25, and 30 seconds.
• Unreachable: calls are forwarded when you are not in an area covered by your
service provider or when your phone is switched off.
• Cancel All: all call forwarding options are canceled.
3. Select the call type, Voice Calls or Data Calls, by pressing the Up or
Down key, and then press the Select soft key or the
key.
Note: Data Call service is only available through a properly provisioned SIM card.
4. Using the Left or Right Navigation key select Activate. Select Deactivate
to turn off call forwarding.
5. Scroll to Forward to, enter or change the number to be called.
To enter an international code, press the 0 key until the + sign displays.
6.
Press the Select soft key to save changes.
Call Barring (SIM Dependent)
The call barring network service allows you to restrict your calls. This option is SIM
dependent and requires a subscription. For more information, contact your service
provider.
Call Waiting
This network service informs you when someone is trying to reach you during
another call.
You can specify individual call waiting options for voice calls and/or data calls.
Changing Your Settings
83
To set your call waiting options:
1. From the Network Services menu screen, select Call Waiting.
2. Select the call type, Voice Calls or Data Calls, to which the call waiting
option is to be applied by pressing the Up or Down Navigation key and
then press the Select soft key or the
key.
Note: Data Call service is only available through a properly provisioned SIM card.
The screen informs you whether call waiting is activated or deactivated.
Select Cancel All to cancel all call waiting features.
3. Using the Up or Down Navigation key you can Activate or Deactivate the
call waiting feature respectively.
4. Press the Select soft key to apply selection.
Auto Redial
This option allows you to turn On or Off the Auto Redial function. Press the Save soft
key to save the settings.
Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Note: The Bluetooth feature must first be disabled before initiating a USB connection with the phone.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth features available. When
the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To
save battery life or in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology headset.
84
Bluetooth
My Devices
This menu provides a list of Bluetooth wireless technology devices discovered by
your handset.
1. Highlight My Devices and press the Select soft key or the
key.
2. To search for the Bluetooth device(s), highlight Search New Device and
press the Select soft key or the
key.
Search New Device
From the Device list,
1. Highlight the device and press the Select soft key or the
key.
2. Enter the PIN for the device.
If connecting to a Bluetooth wireless device consult your Bluetooth device
user manual for your assigned PIN.
If connecting to another handset, enter the same user-defined PIN on both
handsets.
Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the
same PIN. Once the handsets are paired, you will not need to use the PIN again.
3. Press the OK soft key or the
key.
4. If you are unable to pair with the device a popup appears in the display.
Press the Yes soft key to retry.
My Phone’s Visibility
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its
phone name and status. This can be useful if you are attempting to connect
additional Bluetooth devices. Allowing your phone to promote its visibility can pose a
security risk and incite unauthorized connection.
1. When pairing your Bluetooth device to another device, use the Secure
Mode.
2. Highlight the option (On/Off) and press the Select soft key or the
key.
Configuring your Phone’s Bluetooth Name.
My Phone’s Name
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name
entered into this text field. This name can be altered by selecting the pre-existing
text and selecting a new text string in its place. This feature should be paired with a
Bluetooth security option.
Changing Your Settings
85
1. Press the
key to erase the previous name.
2. Use the phone’s keypads to enter a new name. The default input entry
method is Abc, where the initial character is Uppercase and each
consecutive character in that same word is left as lowercase text.
3. Press the Save soft key or the
key to save the new name.
Secure Mode
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its
phone name and status. This transmission can pose a security risk and incite
unauthorized connection to your phone. When pairing your Bluetooth device to your
handset, use the Secure Mode. This feature should be paired with a Bluetooth
security option.
䊳
Highlight the option (On/Off) and press the Select soft key or the
key.
Bluetooth Services
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.
Your phone supports the following profile services:
• Headset: enables outgoing and incoming calls with a Bluetooth headset.
• Handsfree: the remote Bluetooth car kit enables outgoing and incoming calls.
• Stereo Headset: enables outgoing and incoming calls via a Bluetooth headset.
• File Transfer: The phone is configured to transfer data wirelessly to a target device.
• Object Push: The phone is configured to wirelessly exchange personal data (such
as Namecards, Phonebook Contacts, etc.) with applicable Bluetooth devices.
• Basic Printing: The phone is configured to use Bluetooth technology to enable
basic printing from the phone. This is useful to print received text message or
contact information using a Bluetooth printer.
• Dial-up Networking: The phone is configured as a dial up modem for access to the
Internet.
• Serial Port: data communication can be established via a Serial Port connection.
86
Set Applications
Set Applications
The Set Applications feature allows you to configure the functional parameters for
most of the on board applications. These applications are described in more detail
within other sections of this manual.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Applications and press the Select soft key or the
key.
4. Select the type of application which you want to change.
• IM Settings (page 66)
• Messaging Settings (page 69)
• Browser Settings (page 128)
• Camera Settings (page 107)
• Record Audio Settings (page 114)
• Calendar Settings (page 116)
• Address Book Settings (page 48)
5. Press the Select soft key or the
key.
Reset Settings
You can easily reset your phone to its default settings. To reset your phone:
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Reset Settings and press the Select soft key or the
key.
4. The following options are available. Use the Up or Down Navigation key to
scroll to and set options. Choose from the following:
• All
• Sound Settings
• Display Settings
• Phone Settings
5. Press the
key to make your selection by placing a checkmark
adjacent to the option and pressing the Reset soft key.
6. At the “Reset Settings?” prompt, press the Yes soft key to reset, or the
No soft key to cancel. Once your phone has been reset to its default
settings for those selected options, it will restart itself in order to
incorporate the new settings.
7. Enter your phone password, if prompted.
Changing Your Settings
87
Note: To completely remove any personal information stored on your device, see "Precautions for Transfer
and Disposal" on page 157.
Memory Status
You can easily check the amount of memory being used for storing data, such as
messages, media, calendar data, or contacts entries. You can also delete any
selected information from your phone:
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Memory Status and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to view the memory allocation for the
following options:
• Shared Memory: allows you to see how your phone is allocating memory to
Multimedia Messaging, My Stuff (which includes your Music Player, graphics, or
video), and Instant Messaging.
• Messaging: allows you to see how much memory is being used by Text
Messaging, Multimedia Messaging, your Inbox, Sent, Outbox, Drafts. and My
Folder, and Push Messages.
• My Stuff: allows you to seen how much memory is being used by your My Files
folder and events on your Calendar.
• Address Book: allows you to see how much memory is being used by your
Address Book on your handset, the SIM card, and the FDN.
88
Shop Tones
Section 9: AT&T Mall
Topics Covered
• Shop Tones
• Shop Games
• Shop Graphics
• Shop Multimedia
• Shop Applications
• Shop Themes
• MEdia Net Home
The AT&T Mall topics covered in this section are shopping for Tones, Games,
Graphics, Multimedia, Applications, Themes, and the MEdia Home site.
Shop Tones
The Shop Tones menu option allows you to shop for audio tones using the built-in
browser. You can download, record new, and save audio to either your Audio or
Music folder. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Tones menu option to launch the built-in browser and
select a file to download. Follow the on-screen options. The downloaded
files can be stored into either the Audio or Music folders found within the
My Stuff (Phone) location.
4. Select from one of the categories, or use the Search function to locate a
specific audio file by name.
5. Select an audio file and press the
key.
6. When you are ready to purchase the audio file, press the Buy Now button
to charge your e-wallet account and complete the transaction.
AT&T Mall
89
Shop Games
The Shop Games menu option allows you to shop for games using the built-in
browser. You can download new games to your Games folder. To access this menu
option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Games menu option to launch the built-in browser and
select a game to download. Follow the on-screen options. The downloaded
files can be stored in the Games folder found within the My Stuff (Phone)
location.
4. Select from one of the categories, or use the Search function to locate a
specific game by name.
5. Select a game entry and press the
key.
6. When you are ready to purchase the game, press the Buy Now button to
charge your e-wallet account and complete the transaction.
Shop Graphics
The Shop Graphics menu option allows you to shop for graphic images using the
built-in browser. You can download new images to your Graphics folder. To access
this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Graphics menu option to launch the built-in browser
and select an image to download. Follow the on-screen options. The
downloaded files can be stored in the Graphics folder found within the My
Stuff (Phone) location. These images can be used as wallpapers or
included into multimedia messages.
4. Select from one of the categories, or use the Search function to locate a
specific graphic by name.
5. Select an image entry and press the
key.
• When you are ready to purchase the image, press the Buy Now button to charge
your e-wallet account and complete the transaction.
90
Shop Multimedia
Shop Multimedia
The Shop Multimedia menu option allows you to shop for multimedia files (videos)
using the built-in browser. You can download new videos to your Videos folder. To
access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Multimedia menu option to launch the built-in browser
and select a video file to download. Follow the on-screen options. The
downloaded files can be stored in the Video folder found within the My
Stuff (Phone) location. These files can be included into multimedia
messages or sent as attachment files to text messages.
4. Select an video file entry and press the
key.
5. When you are ready to purchase the file, press the Buy Now button to
charge your e-wallet account and complete the transaction.
Shop Applications
The Shop Applications menu option allows you to shop for application files using
the built-in browser. You can download the new applications to your Applications
folder. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Applications menu option to launch the built-in
browser and select an application to download. Follow the on-screen
options. The downloaded applications can be stored in the Applications
folder found within the My Stuff (Phone) location. These files can be
included into multimedia messages or sent as attachment files to text
messages.
4. Select an application file and press the
key.
5. When you are ready to purchase the application, press the Subscribe
button to charge your e-wallet account and complete the transaction.
Shop Themes
The Shop Themes menu option allows you to shop for different Themes for to
display on your handset. You can download the new applications to your
Applications folder. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
AT&T Mall
91
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Themes menu option to launch the built-in browser
and select a graphic to download. Follow the on-screen options. The
downloaded graphics. can be stored in the Graphics folder found within
the My Stuff (Phone) location. These files can be included into multimedia
messages or sent as attachment files to text messages.
4. Select a graphic file and press the
key.
5. When you are ready to purchase the application, press the Buy Now button
to charge your e-wallet account and complete the transaction.
MEdia Net Home
The MEdia Net menu option allows you to quickly access your MEdia Net homepage
using the built-in browser. This page gives you quick access to information such as
local weather, sports scores, horoscope information and quick links to the previously
mentioned shopping sites. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the MEdia Net Home menu option to launch the built-in browser
and launch this AT&T homepage.
92
Music Player
Section 10: AT&T Music
Topics Covered
• Music Player
• Shop Music
• Streaming Music
• The Buzz
• Community
• Music Apps
AT&T Music is a music service which provides you access to play music, shop for
music, listen to Streaming Music, access the Buzz and Music communities, and use
music applications.
Music Player
1. When the Idle screen displays, press the
key.
2. Use the Down Navigation key to scroll through the list of available options.
Note: Audio files less than 300 KB are treated as ringtones, whereas audio files which are greater than
300 KB are stored in the Music Folder. A user cannot set an MP3 file as a ringtone if it is larger than
300 KB.
Adding Music to your Handset
Music files (such as ringtones) can be added to your handset by using one or more of
the following methods:
• Download music and ringtones over the AT&T network directly to your device by
using the shopping for music feature.
• From your existing digital media collection through Windows Media Player®.
• From music store partners through the applicable music client.
Note: If the Bluetooth feature is currently active on your handset, USB communication will not be available.
To transfer files to your handset, turn off the Bluetooth functionality (Settings > Bluetooth).
For more information, refer to "Using the Music Player" on page 98.
AT&T Music
93
Shop Music
AT&T Music can be used to shop for ringtones, Answer Tones™ and songs from
some of your favorite music stores.
1. When the Idle screen displays, press the
key.
2. Highlight Shop Music and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight your music store of choice
or Ringtones and press the Select soft key or the
key.
4. From the Categories listing, highlight the desired entry and press the
key. Press the Back soft key to return to the previous page.
To exit the browser at any time, simply press the
key.
Important!: Before continuing any direct USB cable communication to the phone, first install the latest
version of the PC Studio application to your target PC. This application contains your phone’s
latest USB drivers.
Transferring Music from Digital Music Stores
In order to download music from the computer to your handset, a microSD card and
USB data cable are required. These items are sold separately and can be purchased
by going to www.wireless.att.com.
1. Using your computer, open your preferred WMDRM PC music management
client (i.e., www.napster.com).
2. Download the selected song to a known location on your computer.
3. Insert the microSD card into the handset. For more information see
"Installing the microSD Card" on page 11.
Note: The phone must first be configured to communicate via the Adapter jack prior to connecting the USB.
4. When the Idle screen displays, press the Menu soft key.
5. Select Settings and press the Select soft key or the
6. Select Set Phone and press the Select soft key or the
7. Select USB Settings and press the Select soft key or the
key.
key.
key.
8. Use the Up or Down Navigation key to highlight Media Player (MTP) and
press the Save soft key or the
9. Press the
94
key.
key to return to the Main menu.
Music Player
10. Use the USB adapter cable to connect the handset to the target PC. When
an active connection has been established, a USB icon (
the phone.
) appears on
11. Once the USB connection has been established, the handset displays
"Connected" and the computer screen then shows your device with a list
of options.
12. Choose the Open device to view option and click OK. This displays a new
onscreen dialog with the Internal Storage icon showing. Songs can only
be stored within the internal microSD card and not to the phone’s
built in memory.
13. Click on the Internal Storage icon to open the card’s folders.
14. Double-click the Music folder to view its contents.
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog
window on the PC screen, remove the USB cable and repeat steps 4 - 9.
15. From your computer, highlight the song you wish to download to the
handset.
16. Using your right mouse button, click on the highlighted song and select
Copy from the drop-down menu.
17. Navigate back to the open Music folder and select Paste from the
drop-down menu. This step begins the download process.
AT&T Music
95
Transferring Music using Windows Media Player
A USB cable, microSD card, and a current version of the Windows Media Player® on
your computer are required for this procedure.
1. Open Windows Media Player on your computer (version 10.0 or higher).
Our example documents the procedures using Windows Media Player 11.
2. Insert the microSD card into the handset. For more information see
"Installing the microSD Card" on page 11.
Note: The phone must first be configure to communicate via the Adapter jack prior to connecting the USB.
3. When the Idle screen displays, press the Menu soft key.
4. Select Settings and press the Select soft key or the
5. Select Set Phone and press the Select soft key or the
6. Select USB Settings and press the Select soft key or the
key.
key.
key.
7. Use the Up or Down Navigation key to highlight Media Player (MTP) and
press the Save soft key or the
8. Press the
key.
key to return to the Main menu.
9. Use the USB adapter cable (sold separately) to connect the handset to the
target PC. When an active connection has been established, a USB icon
(
) appears on the phone.
10. Once the USB connection has been established, the handset displays
"Connected" and the computer screen then displays a Windows Media
Player configuration screen, with your model number already populating
the first screen.
96
Music Player
11. Edit the name of the device reference name and click Finish. Windows
Media Player then opens the Sync tab and displays both the current Sync
list and the amount of storage space remaining on the microSD card.
• The Sync list is list of songs from your current playlist which are then
synchronized and mirrored on your A517.
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog
window on the PC screen, please follow steps 3 - 9.
12. From within the Windows Media Player application, click on the Sync tab.
The A517 phone (or referenced name) is then listed on the left panel.
• Previously downloaded songs can be displayed by clicking the Artist icon.
13. The SGH-A517 Sync list appears in a drop-down list on the right side of
the screen (by default this list is empty). This selection determines whether
the audio files will be synchronized with the the inserted memory card.
14. Click on the Library entry on the left pane (Library or Playlist) and then
select either Artist or Songs which populates the application’s main
screen with any associated song files.
15. Drag a desired song entry from the center pane over to the far right pane
(SGH-A517) which shows the phone’s current Sync List. Any songs
dragged to this list are then positioned for synchronization with the phone’s
microSD card.
AT&T Music
97
16. Click the Start Sync button at the bottom right corner of the application to
download the selected songs to your handset. A “synchronization in
progress” message appears on the application. Do not unplug the handset
during this process. Once complete, the right pane indicates “You can now
disconnect the “SGH-A517”.
17. It is now safe to unplug the USB connector from the handset.
Note: While this procedure specifies Windows Media Player, other 3rd party music applications can be used
to download songs to your handset. Refer to the Help files of your specific music application for
details.
Using the Music Player
The Music Player is a phone application that can play music files. The music player
supports files with extensions AAC, AAC+,and MP3. Launching the Media Player (or
other 3rd-party music application) on your computer allows you to navigate within
your music folders and select playback material to download to your phone. Once
downloaded to your phone, it is available using the following procedure:
1. When the Idle screen displays, press the
key.
2. Highlight Music Player and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight a folder from the list:
• Shop Music: launches the AT&T Music Store.
• Now Playing: displays the currently active playlist.
• All: provides a list of all uploaded music files which have been purchased or
downloaded from your computer. This can include ringtones, answer tones, and
music.
• Most Played: provides a list of the most played music files.
• Artists: provides a list of the artists that you have music stored.
• Albums: provides a list of albums.
• Genres: provides a list of genres for the songs you have stored.
• Playlists: provides a list of your music playlists. These playlists provide access
to streaming music streams.
4. Highlight a song and press
key to begin playing the song.
5. Pressing
once exits the Music Player and returns you to the idle
screen with the current song still playing and playback controls available at
the bottom of the idle screen.
6. Pressing
twice exits the Music Player, stops the song, and returns
you to the idle screen.
98
Playing Music Transferred to the Handset
Playing Music Transferred to the Handset
1. When the Idle screen displays, press the
key.
2. Highlight Music Player and press the Select soft key or the
3. Select All and press the
key.
key to open the folder.
4. Use the Up or Down Navigation key to select the song you want to listen to
and press the Select soft key or the
key.
5. Use the Volume key when the phone is closed to toggle the front display on
or off while the Music Player is active.
• If you are playing music and the backlight goes out, you will need to press and
hold this key to gain access to the music player keys when the flip is closed. If
the backlight is out, the keys themselves will not wake up the phone or control
the music player.
6. Use the Music Player controls on the front of the phone to go forward,
play/pause, or go back on the Music Player. Glide your finger over the
desired funtion. The length of time that the controls stay active is the
amount of time that the backlight stays on.
Playing Music through a Stereo Bluetooth Device
Your device supports the Stereo Bluetooth profile (A2DP) that when synched to a
stereo Bluetooth headset will play back music in stereo.
1. Pair your handset to a stereo Bluetooth device. For specific pairing
procedures, refer to ‘Search New Device” on page 85.
2. Press the
key to display the main AT&T Music menu.
3. Highlight Music Player and press the Select soft key or the
4. Select All and press the
key.
key to open the folder.
5. Use the Up or Down Navigation key to select a song and press the
key to play the song within the Media Player.
6. During playback, press the Options soft key. Highlight Transfer to
Bluetooth Stereo Headset and press the
key.
7. From the “Current Music File Will Be Replayed. Transfer to Bluetooth Stereo
Headset?” screen press the Yes soft key to initiate the process or the No
soft key to return to the currently active song. The headset will then search
for compatible stereo bluetooth devices.
8. From the list of compatible devices, select the previously paired bluetooth
headset and press the
headset.
key to begin listening to your song through the
AT&T Music
99
Using Playlists
Playlists are used to assign songs to a list of preferred media which can then be
grouped into a list for later playback. These Playlists can be created via either the
handset’s Music Player options menu or from within a 3rd-party music application
(such as Windows Media Player) and then downloaded to the handset.
Note: The Music Player does not necessarily support all features of a particular file format nor all the
variations of those formats. The Music Player includes support for Windows Media Digital rights
Management (WMDRM) which allows you to play some purchased or subscription content. Copyright
protections may prevent some images, music (including ringtones) and other content from being
copied, modified, transferred or forwarded.
Creating a Playlist
1. Press the
key to display the main AT&T Music menu.
2. Highlight Music Player and press the Select soft key or the
key.
3. Select Playlists and press the Options soft key.
4. Highlight Add New Playlist and enter a unique name for the song list using
the keypad.
5. Press the Options soft key and then press the Save soft key to store this
playlist as a separate file within the main Music Player directory. At this
point the playlist is empty and must be populated with a list of songs found
on your handset.
Adding Songs to a Playlist
1. Press the
key to display the main AT&T Music menu.
2. Highlight Music Player and press the Select soft key or the
3. Highlight Playlists and press Open soft key or the
key.
key.
4. Highlight the previously created playlist and press the Options soft key.
5. Highlight Open and press the
key. By default, this list is blank.
6. Press the Add soft key. Highlight Add and press the
key.
7. Highlight Tracks and press the
key. The Playlist screen then lists all
of the available music files on the handset.
8. To select the music files for addition to the current playlist, highlight the
entry and select it by pressing the
key. You can choose to add either
individual songs, multiple songs, or All available songs.
• All: Selects all of the available listed songs and marks them for addition to the
playlist.
100
Using Playlists
9. Press the Add soft key and wait for the song to be added to the current
playlist.
Remove songs from a Playlist
1. Press the
key to display the main AT&T Music menu.
2. Highlight Music Player and press the Select soft key or the
key.
3. Highlight Playlists and press the Open soft key or the
key.
4. Highlight the previously created playlist and press the
key.
Note: The number of songs currently in that playlist are displayed below the playlist name.
5. Use the Up or Down Navigation key to select an audio file from the list.
6. Press the Options soft key. Highlight Remove from List and press the
key.
7. Highlight Selected and press the
key. The other option is to select
Multiple which would remove multiple song from the current playlist.
8. At the “Remove?” prompt, press either the Yes soft key to confirm deletion
or No to cancel.
Importing a Playlist from a 3rd Party Application
Note: The following procedure is based on use of the Windows Media Player, version 10.0 or higher, as one
of the most commonly available music applications. However, other 3rd-party music software may
be used. Consult the Help files on your music application for the applicable steps to export a playlist
to another device.
1. Open Windows Media Player on your computer (version 10.0 or higher).
Our example documents the procedures using Windows Media Player 11.
2. Insert the microSD card into the handset. For more information see
"Installing the microSD Card" on page 11.
Note: The phone must first be configure to communicate via the Adapter jack prior to connecting the USB.
3. When the Idle screen displays, press the Menu soft key.
4. Select Settings and press the Select soft key or the
key.
5. Select Set Phone and press the Select soft key or the
key.
6. Select USB Settings and press the Select soft key or the
key.
7. Use the Up or Down Navigation key to highlight Media Player (MTP) and
press the Save soft key or the
key.
AT&T Music 101
8. Press the
key to return to the Main menu.
9. Use the USB adapter cable (sold separately) to connect the handset to the
target PC. When an active connection has been established, a USB icon
(
) appears on the phone.
10. Once the USB connection has been established, the handset displays
"Connected" and the computer screen then shows the A517 device.
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog
window on the PC screen, please follow steps 3 - 9.
11. From within the computer application, click on the Sync tab.
12. From the left side of the Library tab, click on Playlists. The right side of the
page is then populated with all of the playlists which the player has
previously found.
• If you need to add additional songs to the currently selected playlist, right click on
the song entry and select Add to and select from your current playlists.
13. Drag and drop the previously created playlist from the Playlists section to
the A517 pane on the right of the screen.
Note: If there are no items present in the playlist, click the Edit Playlist button and begin adding the music
files from among the various media categories.
14. It is now safe to unplug the USB connector from the handset.
15. Confirm the addition of the new Playlist by following these steps:
• Press the
key to display the main AT&T Music menu.
• Highlight Music Player and press the Select soft key or the
key.
• Highlight Playlists and confirm the new playlist is present in the list.
Streaming Music
This service allows you to stream over 30 channels of commercial free music
through your handset.
Note: Since this product uses a large amount of data in its stream process, you should note that you are
responsible for all data charges incurred. It is recommended that you subscribe to a MEdia Max data
bundle so that you are not charged for data overages.
Note: MobiRadio does not work with Bluetooth. Periodically, the application will ask the customer to
confirm they are still listening to the stream.
1. When the Idle screen displays, press the
102
key.
The Buzz
2. Highlight Streaming Music and press the Select soft key or the
key.
3. Press the Options soft key and then press the Down Navigation key to
scroll through the following list of available Menu options:
• Buy: if you want to launch the browser and purchase the Mobiradio service.
• Help: provides some on-screen information about some of the main MobiRadio
features and functions.
• About: provides information about the MobiRadio software version.
• Exit: allows you to exit from the Streaming Music application and return to the
main AT&T Music menu.
4. Press the Guide soft key to display the Mobiradio category list. Press the
Back soft key to access a channel description screen.
Streaming a Music Channel
1. Press the Continue soft key to accept the terms of the trial period. You
have only a few days to use the service before the trial period expires. If at
any time you wish to purchase a subscription to the MobiRadio service,
press the Options soft key, press the Buy soft key, and then follow the on
screen prompts.
2. Use the Up or Down Navigation key to highlight a radio station category
from the guide list and press the
key.
3. Use the Up or Down Navigation key to highlight a specific radio channel
and press the
key to begin the stream to your phone.
The Buzz
This service allows you to navigate through Top 20 chart songs (in a variety of
categories). Other features of this service include streaming entertainment news
about your favorite music artists, access to an artists main page (containing
discographies, ringtones, concert dates, etc.), concert information, games, and
setup options for your own personal billboard notifications.
1. When the Idle screen displays, press the
key.
2. Highlight The Buzz and press the Select soft key or the
key.
3. Press the Yes soft key to send your HTTP information.
4. Press the Trial soft key to accept the terms of the trial period. You have
only a few days to use the service before the trial period expires. If at any
time you wish to purchase a subscription to this service, press the Buy soft
key and follow the on screen prompts.
AT&T Music 103
5. Enter an area code (without the number 1), phone number (without
dashes), and Zip code into the appropriate fields on the Customize screen.
Use the Up or Down Navigation key to switch between fields.
6. Press the Done soft key to accept and save your information.
7. Once the phone number has been successfully registered, press the OK
soft key to continue onto the main Billboard mobile menu.
8. Exit the application at any time by simply pressing the
key.
Community
This Community is a place where you can find a listing of various fan sites that
provide sound clips, wallpapers, bios, discographies, and other information about an
artist.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight AT&T Music and press the Select soft key or the
key.
3. Highlight Community and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to select a fan site and press the
key.
5. To exit the application at any time, simply press the
key.
Music Apps
The Music Apps option access the Internet to provide Music tools for your handset.
Services provided on this site are dependant on your provider and what services you
have purchased.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight AT&T Music and press the Select soft key or the
key.
3. Highlight Music Apps and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to select a music site and press the
key to make your selection.
104
Shop Applications
Section 11: Using the Applications
Topics Covered
• Shop Applications
• Camera
• Record Audio
• Alarms
• Calendar
• Notes
• Tools
• Timer
• Stopwatch
• World Time
Shop Applications
The on-board applications (such as camera, camcorder, calendar, and alarms) can
be supplemented with additional applications which can be purchased via the AT&T
Mall.
First, to access what applications are already on-board your handset:
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
To shop for additional applications for your handset:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Applications menu option to launch the built-in
browser and select a file to download. Follow the on-screen options. Refer
to the ‘Shop Applications” on page 91 for more information on
downloading applications.
Using the Applications 105
Camera
Taking Photos
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1. In Idle mode, press the
to launch the camera.
• This feature can also be accessed from the Idle screen by navigating to: Menu >
My Stuff > Applications > Camera.
2. From the Camera screen, take the photo using the
key or the
Camera
key. The available options from the main Camera Screen are:
• Record Video: allows you to switch from taking a photo to shooting a video clip
using the camera’s camcorder setting.
• Shooting Mode: allows you to take a photo in various modes. Press the
Select soft key to access the mode options. Once you change the mode, the
corresponding indicator appears at the top right of the display.
- Single Shot: allows you to take a single photo and view it before returning to
the shooting mode. Press the Select soft key to set the camera to either Take
and Review or Take and Return.
- Multi Shot: allows you to take a succession of consecutive photos. Press the
Select soft key to set the number of shots and their quality to either:
- 6 Shots. Normal
- 6 Shots. High
- 9 Shots. Normal
- 9 Shots. High
- 15 Shots. Normal
- 15 Shots. High
- Mosaic Shot: allows you to take multiple photos, then group together into one
photo. There are 15 options from which to choose from, based on how the
photos are grouped in the final photo. Press the Select soft key to choose from
the different options.
• Effects: allows you to choose a custom color tone for your photo. Choose from
the following Effects Mode.
- No Effects: automatically adjust the picture for the best quality available.
- Black & White: removes all color and display the picture as black and white.
- Negative: changes the image to a negative image display.
- Sepia: adds a sepia tint to the picture. This is the common orange tint that was
popular in early photography.
- Emboss: changes the image to an embossed image display.
- Sketch: changes the image to a sketched image display.
106
Camera
- Antique: changes the image to an antique image display (Combination of B&W
and Sepia effects).
- Moonlight: changes the image to a moonlight image display (softer tones).
- Fog: changes the image to a pixelated B&W fog image display.
• Frames: allows you to choose a custom frame border for your. Choose from
one of the 30 available frames (including no frame).
• Timer: allows you to set a time delay before the camera takes the photo.
- Off
- 3 sec
- 5 sec
- 10 sec
• Go to My Photos: goes to your My Photos folder, and displays the photos you
have taken.
• Camera Settings: allows you to customize your camera settings
between either Function or Setup options.
- Function options include:
- Size: allows you to set the image size. The icon for the selected image size
appears on the capture screen.
- Quality: allows you to select the picture quality setting. Choose Superfine,
Fine, or Normal.
- Viewfinder Mode: allows you to choose between Actual Screen, Full
Screen & Guideline, Full Screen & Indicator, or Full Screen.
- Scene Program: allows you to set the lighting for the photos. Choose
Normal or Night.
- Exposure Metering: allows you to set the exposure metering for the
photos. Choose Matrix or Center-weighted.
- White Balance: allows you to set the white balance for the camera. Choose
Automatic, Daylight, Incandescent, Fluorescent, Cloudy, or
Sunset.
- Set Up options include:
- Shutter Sound: allows you to select a shutter tone sound when taking a
photo.
- Zoom Sound: allows you to enable a sound when increasing/decreasing
the zoom level.
- Brightness Sound: allows you to enable sound tone when increasing/
decreasing the brightness level.
- Default Name: allows you to set a default prefix name for the photos taken
on your phone.
• Camera Shortcuts: displays the handset keyboard, with the camera
shortcuts indicated. See details following.
Using the Applications 107
Note: Your camera produces photos in JPEG format. The number that appears in the upper-right of the
screen indicates the current number of pictures have been saved to the selected media and an
approximate number of total pictures which can be taken at the current image size.
Camera Shortcuts
Shortcut keys allow you to change options using your keypad, Navigation keys, and
Volume key in capture mode. The following options are available.
takes photo.
adjust the image brightness (Left/Right).
zooms in or out (Up/Down). Not allowed if the picture size is
set to its maximum value.
switches the handset between camera and camcorder mode.
changes the image size.
changes the image quality.
changes the camera shooting mode.
changes the effects of the photo.
changes the white balance.
within the camera mode, this loads frame option #30 on screen.
sets a time delay (Off, 3, 5, or 10 seconds).
switches to the Photo Album.
adds a quadrant overlay to help you position your shot.
Camera Options after a Photo is Taken
After you have taken a photo, you can use various options by pressing the Options
soft key. Highlight an option and press the Select soft key or the
key. The
following options are available:
108
Camera
• Take Another: allows you to take another photo.
• Go to My Photos: goes to the My photos folder and displays photos you have
taken.
• Send: allows you to attach the graphic to a Multimedia Message, send it to a
Bluetooth device, or send it to an ImageStation®.
• Set as: allows you to set the recently taken photo as either a background
Wallpaper on your Main Display or assigned to a Caller ID for a contact.
• Delete: allows you to delete the photo you have taken.
• Rename: allows you to rename the photo.
• Edit: allows you to edit the photo by bringing up a set of options consisting of:
• New Image: allows you to either open a different image or to take a new photo.
• Save as: allows you to change the name of the image.
• Effects: (No Effects, Black and White, Negative, Sepia, Blur, Sharpen, Sketch,
Posterize, or Solarize)
• Adjust: (Brightness, Contrast, or Color)
• Transform: (Rotate, or Flip)
• Insert: (Frame, Clip Art, or Emoticon)
• Set as: (a wallpaper for Main Display and assign it to a Caller ID)
• Send: (via Multimedia Message, via Bluetooth, or to the ImageStation®)
• Bluetooth Visibility: allows you to make the photo visible to Bluetooth devices.
• Print via Bluetooth: allows you to print the currently active image by sending it to a
Bluetooth-enabled printer.
• Undo: allows you to undo edits
• Bluetooth Visibility: allows you to make the photo visible to Bluetooth devices.
• Print via Bluetooth: allows you to print the currently active image by sending it to
a Bluetooth-enabled printer.
• Lock: allows you to lock the photo to prevent deletion.
• Properties: allows you to view the properties for this photo.
Accessing the Photos Folder
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff, and press the Select soft key or the
key.
3. Highlight Graphics and press the Select soft key or the
key.
4. Highlight My Photos and press the Select soft key or the
key.
5. Use the Up or Down Navigation key to select a photo.
6. To open the photo, press the
key.
Using the Applications 109
Using the Camcorder
The Camcorder is a function of the Applications Camera option.
Shooting Video
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you have provide
your subject with sufficient light by having the light source behind you.
1. In Idle mode, press the Options (right) soft key
Applications and press the Select soft key or the
and choose
key.
2. From the on screen list choose Camera and press the Select soft key or
the
key.
3. Press the
key to switch to the camcorder.
Note: The phone will remain in the last active mode (camera/camcorder) until switched or the power is
cycled.
4. Adjust the image by aiming the camera at the subject.
5. Press the
key to begin shooting video.
6. Press the
key to stop the recording and save the video file to your
My Stuff - Video - My Video Clips folder.
- or Before shooting, press the Options soft key to access camcorder options.
7. Once the file has been saved, press the
key to play back your video
for review.
Camcorder Options
Press the
key to access the camcorder options (
). The following are
available only before a video clip has been taken. Different options are available for
the video clip after it has been filmed and saved.
• Take Photo: allows you to switch from shooting a video clip to taking a photo using
the phone camera setting.
• Effects: allows you to choose a custom color tone for your video. Choose from the
following Effects Mode.
• No Effects: automatically adjusts the video for the best quality available.
• Black And White: removes all color and display, the video as black and white.
• Negative: changes the image to a negative image display.
• Sepia: adds a sepia tint to the video. This is the common orange tint that was
popular in early photography.
110
Camera
• Emboss: changes the video to an embossed image display.
• Sketch: changes the video to a sketched image display.
• Antique: changes the video to an antique image display (Combination of B&W and
Sepia effects).
• Moonlight: changes the video to a moonlight image display (softer tones).
• Fog: changes the video to a pixelated B&W fog image display.
• Timer: allows you to set a time delay before the camcorder begins to shoot video.
• Off
• 3 sec
• 5 sec
• 10 sec
• Go to My Video Clips: goes to the My Video Clips folder and displays videos you
have shot.
• Camcorder Settings: allows you to customize your camcorder settings. Choose the
following options:
• Recording Mode: allows you to set the maximum allowable recording time. Choose
Limit for Multimedia Media Message, or Normal.
• Size: allows you to set the video size. Choose 128 x 96, 176 x 144 or, 160 x 120.
Note: To obtain all three available resolutions, the Recording Mode must be set to Normal. Selecting the
Limit for Multimedia Message option limits the size selection options.
• Quality: allows you to select the video quality setting. Choose Fine, Normal, or
Economy.
• Viewfinder Mode: allows you to set the video viewfinder mode. Choose Standard
Ratio Viewer, Full Screen View, or Full Screen View And Indicator.
• Record Audio: allows you to choose whether to use audio in your video. Choose
between On or Off (microphone is muted).
• White Balance: allows you to set the white balance for the camcorder. Choose
Automatic, Daylight, Incandescent, Fluorescent, Cloudy, or Sunset.
• Zoom Sound: allows you to enable a sound when increasing/decreasing the zoom
level.
• Brightness Sound: allows you to enable a sound tone when increasing/decreasing
the brightness level.
• Default Name: allows you to set a default prefix name for the videos shot on your
phone.
• Camcorder Shortcuts: allows you to see the shortcut keys associated when using
the camcorder.
Using the Applications 111
Camcorder Shortcuts
Shortcut keys allow you to change options using your keypad, Navigation keys, and
Volume key in capture mode. The following options are available.
shoots video.
adjust the image brightness (Left/Right).
zooms in or out (Up/Down).
switches the handset between camcorder and camera mode.
changes the video size.
changes the video quality.
changes the recording mode.
changes the effects used on the video.
changes the white balance.
within the camcorder mode, this toggles the microphone
On/Off (mute).
sets a time delay (Off, 3, 5, or 10 seconds).
opens the Video folder where the videos are stored.
adds a quadrant overlay to help you position your shot.
Camcorder Options after a Video is Taken
After you have shot a video, you can use various options by navigating to Your Folder
and selecting a video clip, then pressing the Options soft key. Highlight an option
and press the Select soft key or the
key. The following options are available:
• Viewfinder: returns you to filming mode.
• Send via: allows you to attach the video to a Multimedia Message or send it to a
Bluetooth device.
112
Record Audio
• Delete: allows you to delete the video you have selected or more than one video
clip.
• Rename: allows you to rename the video file.
• Go to My Video Clips: goes to your My Stuff - Video - My Video Clips folder.
• Bluetooth Visibility: allows you to make the selected video or more than one video
clips visible to Bluetooth devices.
• Lock: allows you to lock the video file to prevent deletion.
• Properties: allows you to view the properties for this video file.
Accessing the Video Folder
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff, and press the Select soft key or the
key.
3. Highlight Video and press the Select soft key or the
key.
4. Highlight My Video Clips and press the Select soft key or the
key.
5. Use the Up or Down Navigation key to select a video file.
6. To play the video, press the Select soft key or the
key. The file is
played in the Media Player application.
7. Press the Options soft key to access the video options described
previously.
Record Audio
Record Audio allows you to record voice memos. It also allows you to send your
audio clip to other people as an attachment of an MMS message. Recording time is
limited to free memory space available.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff and press the Select soft key or the
key.
3. Highlight Applications press the Select soft key or the
key.
4. Highlight Record Audio and press the Select soft key or the
5. To start recording, press the
key.
key. Record a audio clip by speaking into
the microphone.
During the recording, you may pause the recording by pressing the
key. To resume recording, press the
key again. If the recording time
expires, the message is automatically stopped and saved.
6. Press the Save soft key to stop the recording. If you press the Save soft key
while paused, it will save the audio clip.
Using the Applications 113
Once the audio clip has been saved, press the Options soft key to display
the following options:
• Record: allows you to record another audio clip.
• Go to Recorded Audio: takes you to your My Stuff - Audio - Recorded
Audio folder.
• Send via: allows you to send your audio clip to other people as an attachment to
either a Multimedia Message or to a Bluetooth device.
• Set as: allows you to set the audio file as a ringtone, a caller ringtone (a
distinctive ringtone used to identify a caller listed in your address book), or an
alarm tone.
• Delete: allows you to delete the selected audio clip or multiple audio clips.
• Rename: allows you to change the audio clip’s name.
• Move to Memory Card: allows you to move either an individual audio clip or
multiple audio clips to the memory card.
• Copy to Memory Card: allows you to make a copy of either an individual audio
clip or multiple audio clips and then move the duplicate file to the memory card.
• Bluetooth Visibility: allows you to make the individual or multiple audio files
visible to a Bluetooth device.
• Lock: allows you to lock the Audio file.
• Properties: displays the Name, Date (and Time), Format, Length. Size, and
Locked/Unlocked status of the voice memo.
7. To exit, press the Back soft key or the
key.
Accessing the Recorded Audio
This menu shows a list of saved voice memos. When a voice memo is recorded and
saved, it is stored in the Recorded Audio folder. To access this menu use the
following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff and press the Select soft key or the
key.
3. Highlight Applications press the Select soft key or the
key.
4. Highlight Record Audio and press the Select soft key or the
key.
5. Press the Options soft key, highlight Go to Recorded Audio, and press the
Select soft key or the
key.
6. Use the Up or Down Navigation key to select from the list of previously
recorded memos.
7. To play a recording, press the Options soft key and press Play, or the
key.
8. To exit, press the Back soft key or the
114
key.
Alarms
Alarms
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm even if the phone is
switched off.
To set the alarm:
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Alarms and press the Select soft key or the
key. The
following options display:
• Wake-up Alarm: the alarm rings to wake you up at the specified time.
• Alarm 1: primary alarm setting.
• Alarm 2: secondary alarm setting.
• Auto Power-up: set for Off or On. On means that even if the handset is turned
off, the phone will activate for the alarm to ring.
5. Highlight an alarm type and press the Select soft key or the
key. Set
the following options:
• Alarm: Use this to activate/deactivate this feature (On/Off). The only way to edit
the remaining fields is to select On.
• Alarm Time: use the alphanumeric keypad enter a time for the alarm to sound.
Note: Your phone is preset to a 12-hour format. To change the time format, see "Set Time & Date" on page
76.
• AM/PM: press the Left and Right Navigation key to adjust the AM/PM setting.
• Alarm Day: press the
key to access the Recurrence menu. Use the Up or
Down Navigation key to highlight a occurrence of the day(s) you wish your alarm
to sound. Press the
key to select the day entry. Press the OK soft key to
save your settings.
• Alert Tone: press the
key to select a tone from one of the Basic Alarm
tones, Default Tones, or Recorded Audio files.
6. Press the Save soft key or the
key to save these changes.
Note: To stop the alarm when it rings, open the phone and press any key.
Using the Applications 115
Note: Press OK soft key to turn off the alarm.
Setting Auto Power Alarms
You can set the phone to ring the alarm when the time for an alarm comes, if the
phone is switched off.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Alarms and press the Select soft key or the
key. Select
Auto Power-up and press the Select soft key.
5. Using the Up or Down Navigation key, highlight On and press the Save soft
key or the
key to activate the Autopower feature.
If the menu option is set to Off, and the phone is switched off at the
specified time, the alarm does not ring.
6. When you have finished, press the Back soft key.
Calendar
The calendar feature allows you to view the Month, Week, and Day layout views. You
can also create an Appointment, Anniversary, Miscellaneous, or Task entries. It also
shows any Missed Alarm Events that have occurred. To access the Calender menu,
press the C control key (just under the Navigation keys) or use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Calendar and press the Select soft key or the
key.
5. Press the Options soft key. The options display as:
• View By: sets the view mode as either Day or Week.
• Create: allows you to create an Appointment, Anniversary, Miscellaneous, or
Task.
• Go to: allows you to access today or a specific date for events.
• Event List: allows you to see a list of previously created events, by category of
Appointment, Anniversary, Miscellaneous, or Task.
• Delete: allows you to delete a previously created event. Options are: a Selected
event, Periods (delimited by From/To dates), This Month, and All.
116
Calendar
• Settings: allows you to set whether the week begins on Sunday or Monday,
and whether the default view of the calendar is by Month, Week, or Day.
6. Press the Select soft key or the
key.
Appointment
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Calendar and press the Select soft key or the
key.
5. Press the Options soft key. Highlight Create, select Appointment, and
press the Select soft key or the
key to use the following options:
• Subject: enter a title for this appointment (up to 30 characters).
• Details: enter a description for this appointment (up to 100 characters).
• Start Date: enter a date for this appointment to begin.
• Start Time: enter a time for this appointment to begin.
• AM/PM: use the Right Navigation key to select AM or PM for the start time of
the scheduled event.
• End Date: enter a date for this appointment to end.
• End Time: enter a time for this appointment to end.
• AM/PM: use the Right Navigation key to select AM or PM for the end time of
the scheduled event and press the Select soft key.
• Location: enter a location description for this appointment (up to 30 characters).
• Alarm: allows you to set an alarm for this event. Press the
key to select
this option. Once selected, all remaining alarm settings are enabled.
- Before: allows you to the amount of time (minutes, hours, days) before your
appointment, you wish the alarm to sound.
• Alarm Tone: allows you to choose an alarm tone. Once highlighted, press
the
key to select this audio file.
• Repeat: allows you to set that the event is to repeat, and the number of
repetitions allowed for this appointment (Daily, Weekly, or Monthly). Press the
key to select this option. Once selected, all remaining alarm settings are
enabled.
• until: allows you to set as duration for this appointment by assigning an
expiration date.
6. When you have finished, press the
key to save this new appointment
entry.
Using the Applications 117
Anniversary
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Calendar and press the Select soft key or the
key.
5. Press the Options soft key. Highlight Create, select Anniversary, and
press the Select soft key or the
key to use the following options:
• Occasion: enter a title for this occasion (up to 100 characters).
• Date: enter a date for this anniversary to begin.
• Alarm: allows you to set an alarm for this event. Press the
key to select
this option. Once selected, all remaining alarm settings are enabled.
- before: allows you to the number of units of time (day, week) before your
anniversary, you wish the alarm to sound.
- Alarm Time: allows you to enter a time for the alarm to begin notifying you of
the occasion.
- AM/PM: use the Right Navigation key to select AM or PM for the start time of
the scheduled event.
- Alarm Tone: allows you to choose an alarm tone. Once highlighted, press the
key to select this audio file.
• Repeat Every Year: allows you to set whether this entry is repeated on a yearly
basis. Press the
key to select this option. Once selected, all remaining
alarm settings are enabled.
6. When you have finished, press the
key to save this new anniversary
entry.
Miscellaneous
This event category groups together all other events, such as holidays and private
entries.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Calendar and press the Select soft key or the
key.
5. Press the Options soft key. Highlight Create, select Miscellaneous, and
press the Select soft key or the
key to use the following options:
• Subject: enter a title for this event (up to 15 characters).
118
Calendar
•
•
•
•
•
•
•
•
Details: enter a description for this event (up to 100 characters).
Start Date: enter a date for this event to begin.
Start Time: enter a time for this event to begin.
AM/PM: use the Right Navigation key to select AM or PM for the start time of
the scheduled event.
End Date: enter a date for this event to end.
End Time: enter a time for this event to end.
AM/PM: use the Right Navigation key to select AM or PM for the end time of
the scheduled event and press the Select soft key.
Alarm: allows you to set an alarm for this event. Press the
key to select
this option. Once selected, all remaining alarm settings are enabled.
- before: allows you to the number of units of time (minute, hour, day, week)
before your event, you wish the alarm to sound.
- Alarm Tone: allows you to choose an alarm tone. Once highlighted, press the
key to select this audio file.
Task
This option allows you to create a “to do” entry of tasks which are created in a
similar fashion to previously described Calendar entries.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Calendar and press the Select soft key or the
key.
5. Press the Options soft key. Highlight Create, select Task, and press the
Select soft key or the
key to use the following options:
• Task: enter a description for this task (up to 100 characters).
• Start Date: enter a date for this task to begin.
• Due Date: enter a date for this task to end.
• Priority: allows you assign the task a priority (High,Normal, or Low).
• Alarm: allows you to set an alarm for this event. Press the
key to select
this option. Once selected, all remaining alarm settings are enabled.
- before: allows you to the amount of time (day, week) before your appointment,
you wish the alarm to sound.
- Alarm Time: enter a time for this task to begin.
- AM/PM: use the Right Navigation key to select AM or PM for the start time of
the scheduled event.
- Alert Tone: allows you to choose an alarm tone. Once highlighted, press the
key to select this audio file.
Using the Applications 119
6. When you have finished, press the
key to save this new appointment
entry.
Viewing an Event
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Calendar and press the Select soft key or the
key.
The calendar displays with today date highlighted.
5. Select the date of the event (s) you want to view and press the
key or
use the Navigation keys to move to the date with an assigned event.
Note: The icon categories displayed at the bottom display any events scheduled for the day you selected.
6. Press the Up or Down Navigation key to scroll to the previous or next
event.
7. When you have finished, press the
key.
Notes
This option allows you to create notes. These notes do not have a relationship with
events on the calendar.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Note and press the Select soft key or the
key. A blank New
Note screen displays.
5. Press the Options soft key. Highlight Create, and press the Select soft key
or the
key.
6. Enter your text and press the Options soft key and then the Save soft key.
Tools
This tools feature allows you to access features such as: Calculator, Tip Calculator,
Converter, Timer, Stopwatch, and World Time.
120
Tools
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the
basic arithmetic functions; addition, subtraction, multiplication, and division.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Tools and press the Select soft key or the
key.
5. Highlight Calculator and press the Select soft key or the
key.
6. Enter the first number using the numeric keys.
Note: To include a decimal point, press the * key. For brackets/parentheses, press the # key. For other
mathematical expressions, press the soft left key for Options.
7. Enter the operation for your calculation by pressing the Navigation keys,
according to the illustration on the display.
8. Enter the second number.
9. To view the result, press the
key.
Tip Calculator
With this feature, you can use the phone to calculate the amount of money left as a
tip based on parameters such as: total bill amount, tip percentage, and number of
members in your party.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Tools and press the Select soft key or the
key.
5. Highlight Tip Calculator and press the Select soft key or the
key.
6. Enter the values into the appropriate fields by using the numeric keys:
• Bill
• Tip(%)
• # paying
Note: To include a decimal point by pressing the
key.
Using the Applications 121
7. The remaining fields indicate:
• Tip($): the amount of the tip based on the figures entered.
• You pay: your share of the total check amount. This value is based on the figure
entered within the # paying field.
Converter
The conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Tools and press the Select soft key or the
key.
5. Highlight Converter, highlight the function, and press the Select soft key
or the
key.
Timer
You can use this menu to set a countdown timer. To enable the Timer, use the
following options:
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Tools and press the Select soft key or the
key.
5. Highlight Timer and press the Select soft key or the
key.
6. Press the Set soft key to enter the length of time.
7. Enter the time and press the OK soft key.
8. Press the
122
key to start the timer. Press the
key to stop the timer.
Stopwatch
Stopwatch
You can use this menu to measure intervals of time for 4 separate times.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Tools and press the Select soft key or the
key.
5. Highlight Stopwatch and press the Select soft key or the
6. Press the
key.
key to start the stopwatch.
7. Press the
to stop the stopwatch. Press the Reset soft key to erase all
times recorded.
World Time
World Time allows you to view the time of day or night in another parts of the world.
World displays time in the 30 different time zones around the world.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the Select soft key or the
key.
4. Highlight Tools and press the Select soft key or the
key.
5. Highlight World Time and press the Select soft key or the
key.
6. Press the
key to set the city or area as the new time zone. The
displayed time will shift to reflect the time zone selected.
7. Use the Left or Right Navigation keys to browse cities and times.
Note: If the selected area is in Daylight Savings Time (DLS) area, you must press the Options soft key and
select Apply Daylight Saving. If the area does not have DLS, uncheck this option.
Using the Applications 123
Section 12: MEdia Net and WAP
Topics Covered
• Before Connecting to the MEdia Net Homepage
• Launching the MEdia Net Homepage
• Accessing the MEdia Net Site
• Navigating with the WAP Browser
• Using Go to Messages
• Using Go to My Stuff
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
allows you to access the Internet. This section explains how to access the WAP
services of your service provider and how to navigate the WAP browser.
Before Connecting to the MEdia Net Homepage
If you select the MEdia Net icon using the Select soft key, the following options are
listed:
• MEdia Net Home: launches the WAP browser.
• Favorites: lists your favorites that will appear on the WAP browser when launched.
Standard favorites are News, Sports, Weather, and MEdia Net, but there are also
empty slots for adding your own favorite webpages.
• Enter URL: allows you to enter a standard web site. Options are to GO to the
website (which launches the browser), Select Language (which gives you the
options of English, Français, or Español), or Cancel.
• Browser Profiles: allows you to store up to five browser profiles. The MEdia Net
profile is preset, and is the default browser. The profiles options include Profile
Name, Home URL, Proxy Use, and GPRS Settings.
• Clear Cache: allows you to clear cache memory that has been used by web page
access. The cache is the phone’s temporary memory in which the most recently
accessed web pages are stored. You can clear the cache at anytime.
1. When the Idle screen displays, press the Menu soft key.
124
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Clear Cache and press the Select soft key or the
key.
Launching the MEdia Net Homepage
4. Press the Yes soft key or the
key to confirm the deletion or No to
cancel the operation.
5. When you have finished, press the
key.
Launching the MEdia Net Homepage
1. In Idle mode, press the
key to launch the WAP browser.
• You can also press the Menu soft key to access menu mode and highlight
MEdia Net and press the Select soft key or the
key.
2. Your phone is connected to the network and loads the MEdia Net Home
homepage. The content of the start-up homepage is customizable, but can
include the following selections:
• Search field: allows you enter a text string into the field and then search the
MEdia Net database for matches. Once you have entered a word, press the
Right Navigation key to select the Search button and press the
key to
begin your search.
• My Links: provides you with quick access to your those sites which you have
setup in this category. Highlight one of these entries and press the
key to
launch that web page.
• Categories: provides you with a list of MEdia Net web pages containing links to
a variety of special interest sites. Highlight a selection from this list and press the
key. These categories can be edited from within Customize MEdia Net.
- WHAT’s HOT: provides a list of the most popular web page topics. Highlight a
link from the list and press the
key to be taken to that web page.
- Tones, Games, Apps: takes you to the MEdia Mall where you can sign up for
the Tone Club (for discount rates on bulk ringtone orders) or purchase Ringtones,
Answer Tones, Games, and Applications. Highlight a link from the list and press
the
key to begin the purchase process.
- Mail & Messaging: takes you to the MEdia Net messaging center where you
can access a variety of web-based messaging services and applications such as:
Mobile Email, Mobile IM, Yahoo! Mail/Messenger, Windows Live Mail/Messenger,
AOL Mail, Chat & Date, Address Book, and Calendar. Highlight a service from the
list and press the
key to begin using the service.
Note: Prior to using these services, you must complete the MEdia Net registration process located at:
www.wireless.att.com.
- Sports: takes you to the MEdia Net Sports page listing where in addition to
national sports headlines, you can enter your local ZIP code and receive
information about your local teams. Highlight Continue and press the
key.
You can easily edit the teams listed within your My Teams section of this page by
using your Navigation keys to select Edit (from the upper-right of the page), and
key.
press the
MEdia Net and WAP 125
Note: Prior to using this service you must agree to the terms of the service agreement and setup the
service on your handset.
- More Categories: takes you to the MEdia Net Categories page which provides
you with additional links to other web services . Highlight a link from the list and
press the
key to begin.
• My Account: provides you with access to a listing of your most recent
purchases and available product (services). From the My Account screen,
highlight My Purchases and press the
key to begin.
• Customize MEdia Net: provides you with a list of MEdia Net setup and service
options which allow you to configure different aspects of the MEdia Net
experience. Highlight a selection from this list and press the
key.
- Edit My Links: provides you with a list of available Internet links which you can
choose to add to your My Links section of the main Media Net homepage. To
add a link, navigate to the Add to My Links section, highlight an entry, and
press the
key. To remove a link, navigate to the Move/Delete Links
section, highlight an entry, and press the
key.
From the Edit My Links page, highlight Remove, and press the
key.
- Edit Categories: allows you to edit those category entries which appear on the
MEdia Net homepage. Although the first four entries (WHAT’S HOT, Tones,
Games, Pics, and Cellular Video) can not be removed, the remaining entries can
be toggled on or off. Highlight a category entry and press the
key to toggle
it on (appear on the page) or off (remove it from the homepage).
- Parental Control: provides you with settings which can be configured to restrict
certain media content from being downloaded on the phone. For more
information, refer to "Parental Controls" on page 123.
- Username & Password: allows you to setup a username and password prior to
gaining access to the MEdia Net homepage and related services.
Note: Prior to using this service you must agree to the terms of the service agreement and setup the
service on your handset.
- MEdia Net Mail: allows you to access and edit the entries found within the
MEdia Net messaging center. Although most of the entries can not be removed,
the remaining entries can be toggled on or off by navigation to the top of the
page, highlight Edit, and press the
key.
From the Mail & Messaging page, highlight an entry and press the
key to
toggle it on (appears on the Mail & Messaging page) or off (remove it from the
Mail & Messaging page).
- MEdia Net Tour: allows you to take a quick guided tour through the main
features of the MEdia Net pages (homepage, navigation, teams, etc.).
- Privacy Policy: provides the web address for Cellular’s Privacy Policy.
126
Accessing the MEdia Net Site
• Help: provides you with list of some of the most frequently asked questions
regarding MEdia Net functionality. Highlight a question and press the
key
to launch an on screen description
3. To scroll through the screen, use the Up and Down Navigation keys.
To exit the browser at any time, simply press the
key.
Accessing the MEdia Net Site
There are several ways to access a WAP site:
• Selecting a link on the browser
• Using a bookmark item in the Favorites folder; use the Bookmarks option on the
browser menu list or Favorites menu.
• Entering a URL address manually; use the Go to URL option on the browser menu
list.
Navigating with the WAP Browser
1. To scroll through browser items, press the Up or Down Navigation keys.
2. To select a browser item, highlight a MEdia Net entry and press the
key or press the Options soft key and choose Select.
3. To return to the previous page, press the
key, or press the Options
soft key and choose Back.
4. To access the browser menu list, press the Menu soft key.
5. To return to the start-up homepage, press the Menu soft key and select the
Home option.
Note: Once connected to the MEdia Net Site, to cancel or exit from the browser you must use the
key to exit the browser, then confirm the action by selecting the Yes soft key.
Entering Text in the WAP Browser
When you are prompted to enter text, the currently active text input mode is
indicated on the screen. To change the text input mode, press the
key one or
more times.
The following modes are available:
• Upper-Case Alphabet Mode (A): allows you to enter upper-case characters.
• Lower-Case Alphabet Mode (a): allows you to enter lower-case characters.
Note: You can enter symbols in upper or lower case alphabet mode by pressing the 1 key.
MEdia Net and WAP 127
• T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this
mode, you can use only the 0 key to display alternative words. To change case,
press and hold the * key.
• Number Mode (1): allows you to enter numbers.
Selecting and Using Menu Options
Various menus are available when you are using the WAP Browser to navigate the
Wireless Web.
To access a menu option, press the Menu soft key. A menu list displays.
Note: The menus may vary, depending on your version of the WAP Browser.
The following options are available:
• Enter URL: allows you to manually enter the URL address of a WAP site. After
entering an address, press the OK soft key to go there directly.
• Go to Favorites: allows you to select and go to favorite locations.
• Go to Messaging: allows you access to Messaging to create a text message,
check your inbox, go to the sent message folder, go to your outbox, go to your draft
messages, and go to My Folder without disconnecting from the browser.
• Go to My Stuff: allows you access to your ringtones/audio, graphics, video, music,
applications, other files, memory card, and memory status.
• MEdia Net Home: takes you back to the MEdia Net Home page.
• Back: takes you back to previous browser selection.
Entering a URL
1. When the Idle screen displays, press the Menu soft key.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Enter URL and press the Select soft key.
4. Using the blank field provided, enter the URL.
5. Press the Options soft key to select GO, Select Language, or Cancel; or
press the
key.
Using Go to Favorites
While navigating through either the Internet or the MEdia Net pages, you can
bookmark a site to quickly and easily access it at a future time. The URL addresses
of the bookmarked sites are stored in the Favorites folder, where you can use the 4preset URL addresses and store your own favorite URL addresses.
128
Navigating with the WAP Browser
Accessing a WAP Site Using Favorites
1. When the Idle screen displays, press the Menu soft key.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Favorites and press the Select soft key.
4. Select a bookmark item on the Favorite list. The preset URLs consist of:
• News
• Sports
• Weather
• Media Net (homepage)
5. Press the Options soft key to select GO or press the
key.
Storing a URL Address as a Favorite
1. When the Idle screen displays, press the Menu soft key.
2. Select MEdia Net and press the Select soft key or the
3. Select Favorites and press the Select soft key or the
key.
key.
4. Use the Down Navigation key. Highlight an Empty location and press the
Add New soft key.
5. Enter a reference name for the URL address and then use the Down
Navigation key t activate the URL field.
6. Use the keypad to enter the URL address (www.website.com).
Tip: Use can use the
key to cycle through that available symbols and choose the “.” (period) and
the @ (at sign) needed for most website addresses.
7. Select Options, highlight Save, and press the Select soft key or the
key.
8. When you have finished, press the
key.
Editing Favorites
1. When the Idle screen displays, press the Menu soft key.
2. Select MEdia Net and press the Select soft key or the
3. Select Favorites and press the Select soft key or the
key.
key.
4. From the Favorites list, select the bookmark you want to change.
5. Press the Options soft key. Highlight Edit and press the
key.
6. Change the address and the name, as you would when storing a new one.
MEdia Net and WAP 129
7. Press the Select soft key and select Save. Press the Select soft key or the
key.
8. When you have finished, press the
key.
Deleting Favorites
1. When the Idle screen displays, press the Menu soft key.
2. Select MEdia Net and press the Select soft key or the
3. Select Favorites and press the Select soft key or the
key.
key.
4. From the Favorites list, select the bookmark you want to change.
5. Press the Options soft key. Highlight Delete and press the
key.
6. Highlight either Selected or All and press the Select soft key or the
key.
7. Press the Yes soft key or the
8. When you have finished, press the
key to confirm the deletion.
key.
Using Go to Messages
While you are active on the browser, you can create, receive, send, and draft text
messages.
1. While connected on the browser, press the Menu soft key.
2. Use the Up and Down Navigation keys to highlight Go to Messaging, then
press the Select soft key or the
key.
3. Select Create a Text Message, select a message saved in the Draft folder,
or answer/reply to a message in your Inbox or Sent folders. For details on
how to use messages, please see "Messaging" on page 58.
You are still actively connected while you perform these activities, and once you
have finished, will be returned back to the browser screen. Depending on your
provider, service fees will continue to accrue.
Using Go to My Stuff
While you are active on the browser, you may also go to your My Folder for
ringtones/audio, graphics, video, music, applications, and other files. You can
download, view, set as defaults (for ringtones, wallpapers, and Caller IDs), delete,
and rename files, and check memory status. Not all functions (such as camera,
camcorder, and audio recorder) are available while you are connected to the
browser.
1. While connected on the browser, press the Menu soft key.
130
Using Go to My Stuff
2. Use the Up and Down Navigation keys to highlight Go to My Stuff, then
press the Select soft key or the
key.
Downloading Multimedia Files
You can buy a variety of multimedia files, such as ringtones, graphics, applications,
Multimedia contents, and so on from the WAP browser and download them to your
phone’s memory. Your phone has embedded links to the WAP sits providing you with
download services, preset by your service provider.
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall.
3. Highlight Shop Tones, Shop Games, Shop Graphics, Shop Multimedia,
Shop Applications, or Shop Themes, depending on the type of items you
want to buy.
To access homepage of the online shopping mall, select MEdia Net Home.
4. Find the item you want to download and follow the on-screen instructions
to purchase it.
Note: This content is delivered to you in Multimedia messages. You can retrieve the messages from the
server and then save the items in your phone’s memory. you cannot forward these messages to other
people or add the saved items to a Multimedia message.
MEdia Net and WAP 131
Section 13: Accessibility
Topics Covered
• TTY Settings
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a telecommunications device that
allows people who are deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone. This phone comes TTY-ready and only
requires the insertion of the TTY device to enable this feature.
Use the following steps to access the TTY settings:
1. Inserting a TTY connector into the Headset/Adapter jack (on the left side of
the phone) enables this function.
For additional technical support you may access the following website or call
1-888-987-4357.
http://www.samsungtelecom.com/contact_us/accessibility.asp
132
Health and Safety Information
Section 14: Health and Safety Information
Topics Covered
• Health and Safety Information
• Samsung Mobile Products and Recycling
• UL Certified Travel Adapter
• Consumer Information on Wireless Phones
• Road Safety
• Responsible Listening
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information 133
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC
RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
GSM
850
• Head: 1.27 W/Kg.
• Body-worn: 1.07 W/Kg.
134
Samsung Mobile Products and Recycling
1900
• Head: 1.06 W/Kg.
• Body-worn: 0.646 W/Kg.
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to: http://www.samsungwireless.com/recycling.asp for more information.
UL Certified Travel Adapter
The Travel Adaptor for this phone has met applicable UL safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
Health and Safety Information 135
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
136
Consumer Information on Wireless Phones
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
Health and Safety Information 137
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
138
Consumer Information on Wireless Phones
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
Health and Safety Information 139
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
140
Consumer Information on Wireless Phones
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
Health and Safety Information 141
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
142
Responsible Listening
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies.
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com.
Provided by the Cellular Telecommunications & Internet Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the headphones that
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
Health and Safety Information 143
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing in
your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: www.audiology.org
144
Operating Environment
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
Health and Safety Information 145
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
For more information see, http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile
phones, to assist hearing device users in finding phones that may be compatible
with their hearing devices. Not all phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing
device and hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the
phone with your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not labeled. M4 is
the better/higher of the two ratings.
146
Potentially Explosive Environments
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than
unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference.
Your hearing device manufacturer or hearing health professional may help you find
results for your hearing device. The more immune your hearing aid is, the less likely
you are to experience interference noise from mobile phones.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Health and Safety Information 147
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
148
FCC Notice and Cautions
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Health and Safety Information 149
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
150
Availability of Various Features/Ring Tones
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in serious safety
hazards.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
Health and Safety Information 151
accessories. If unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices could result
in damage to the equipment and a possible risk of fire, explosion, leakage, or other
serious hazard.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal objects,
such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
152
Care and Maintenance
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
Health and Safety Information 153
Section 15: Warranty Information
Topics Covered
• Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada.
154
Standard Limited Warranty
This Limited Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
Warranty Information 155
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
156
Standard Limited Warranty
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in
order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information 157
Samsung Telecommunications America, LLC
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
158
Index
B
A
AAC 98
AAC+ 98
Accessing
Media Net 92
Accessing a Menu Function 35
Add word 44
Adding songs to a Playlist 100
Address Book
Searching for a Number 32
AIM 66
Alphabet mode (ABC and abc) 42
AOL 66
Applications 105
Alarm 115
Calculator 121
Calendar 116
Converter 122
Note 120
Tasks 119
Tip Calculator 121
AT&T 93
AT&T Music 93
Community 104
Music Player 98
Shop Music 94
The Buzz 103
Audio 89
Battery
charging 9
installing 8
low indicator 12
BellSouth 66
Billboard mobile 103
Bluetooth Device
Stereo 99
Bluetooth Services 86
C
Call Functions 23
Adjusting the Call Volume 30
Answering a Call 25
Correcting the Number 23
Making a Call 23
Recent Calls 25
Redialing Last Number 24
Silent Mode 29
Call Time 28
Call Waiting 33 87
Camcorder Options 110
Camcorder Shortcuts 111
Effects 110
Settings 111
Camera
Taking Pictures 106
Camera lens 18
Camera Options
Record Video 106
Timer 111
Camera Shortcuts
Shortcut Keys 108 112
Charging battery 9
,
,
159
Clear key 21
Command Keys 20
Configuring
Bluetooth Name 85
Bluetooth Security 86
Bluetooth Visibility 85
Your Phone’s Bluetooth Name
85
G
Games 90
Getting Started 7
USIM card information 7
Voicemail 12
Graphics 90 91
Greeting Message 77
,
H
Creating a Playlist 100
D
Data Call Time 29
Data Volume 28
Deleting Favorites 130
Dialing a Number
Address Book 47
Digital Music Stores 94
Display
icons 18
Display Settings 74
E
Editing Favorites 129
End key 22
Ending a Call 24
Entering Text 42
Changing the Text Entry Mode
42
Using Alphabet Mode 44
Using Numbers 46
Using Symbols 45
Using T9 Mode 43
F
FDN (Fixed Number) Mode 55
Front LCD 17
Functions and Options 20
160
Health and Safety Information 133
I
Icons, description 18
Importing a Playlist 101
In Call Options 31
Installing the microSD Card 11
International Call 23
K
Key Tones
Muting 32
Keypad Tone 73
L
Left soft key 21
Low battery indicator 12
M
Making a Call
Address Book 24
Managing Address Book Entries 55
Managing the Address Book
Copying an entry to the Phone
50
Media Net 92
Memory card slot 18
Menu Navigation 35
Menu Outline 36
Message Tone 73
Messaging 58
Types of Messages 58
Missed Call
Adding to Address Book 26
Call Back 26
Deleting 27
Details 26
Send Message 27
Viewing 25
MobiRadio 102
MP3 98
Multimedia Files
Downloading 131
Music Apps 104
Music Channel 103
Mute 32
N
Navigation key 22
Network Selection 87
Network Services
Call Forwarding 82
Number mode 42 43
Numeric 43
,
O
Options
During a Call 30
Putting a Call on Hold 30
P
Phone
icons 18
Turning on/off 12
Playing Music Transferred from the
Handset 99
Power On/Off Tone 73
R
Record Audio 113
Remove songs from a Playlist 101
Responsible Listening 143
Right soft key 21
S
Safe Use of your phone 135
Security 78
Security Settings 78
Send key 22
Service Dialing Numbers 57
Settings 72
Memory Status 88
Reset Settings 87
Shooting Video 110
Shortcuts 36
Silent Mode 74
SIM card
installing 8
Soft Keys 21
Sound Settings 72
Speakerphone Key 31
Speed Dial
Setting Up Entries 52
Standard Limited Warranty
154
Stereo Bluetooth Device 99
Storing a Number
Address Book 49
Storing a number
Phone’s Memory 49
Streaming Music 102
Streaming a Music Channel
103
Symbols 43
161
T
V
T9 Mode
enter a word 43
T9 mode 42
Text Input Method
Changing 42
Text Messages 58
Transferring Music
From the Digital Music Stores
94
Windows Media Player 96
Travel adapter 9
Turning on/off
phone 12
U
Understanding Your Address book 47
Adding a New Contact 49
Group 51
Own Phone Number 54
Speed Dial 52
Using Contacts List 47
Understanding Your Phone 14
Features of Your Phone 14
Front View of Your Phone 17
,
20
Open View of Your Phone 15
USB 81
Settings 81
Using Management
Checking the Memory Status
56
Deleting all of the Phone book
Entries 56
Using the Camcorder 110
162
Viewing an Event 120
Voice Mail 13
Changing Name and Number
13
W
Warranty Information 154
Windows Live Hotmail 66
Windows Media Player 96