NVE-N852ADVD | User manual | Alpine N852A - NVE Hardware manual

Add to my manuals
19 Pages

advertisement

NVE-N852ADVD | User manual | Alpine N852A - NVE Hardware manual | Manualzz

Yamagata Printing

Co., Ltd.

2-6-34, Takashima,

Nishi-ku, Yokohama,

Kanagawa, Japan

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

ALPINE ELECTRONICS, INC.

Tokyo office: 1-1-8 Nishi Gotanda,

Shinagawa-ku, Tokyo 141-8501, Japan

Tel.: (03) 3494-1101

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

1-888-NAV-HELP (1-888-628-4357)

ALPINE ELECTRONICS OF CANADA, INC.

Suite 203, 7300 Warden Ave. Markham,

Ontario L3R 9Z6, Canada

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

Tel.: (03) 9769-0000

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7-11 40878 Ratingen,

Germany

Tel.: 02102-45 50

ALPINE ITALIA S.p.A.

Via C. Colombo 8, 20090 Trezzano Sul

Naviglio MI, Italy

Tel.: 02-48 47 81

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue De La Belle Etoile, Z.I. Paris Nord Il

B.P. 50016 F-95945, Roissy,

Charles De Gaulle Cedex, France

Tel.: 01-48 63 89 89

ALPINE ELECTRONICS OF U.K., LTD.

13 Tanners Drive, Blakelands,

Milton Keynes MK14 5BU, U.K.

Tel.: 01908-61 15 56

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal De Gamarra 36, Pabellón 32

01013 Vitoria (Alava)-Apdo. 133, Spain

Tel.: 34-45-283588

Designed by ALPINE Japan

Printed in Japan (Y)

68P41262Y44-O

NVE-N852A

DVD Car Navigation System

HARDWARE MANUAL

Please read before using this equipment.

2

PRECAUTIONS

IMPORTANT INFORMATION, PLEASE READ CAREFULLY BE-

FORE USING THIS PRODUCT.

This product is intended to safely provide turn by turn instruction to get you to a desired destination. Please read the following precautions to ensure that you use this navigation system correctly.

This product is not a substitute for your personal judgment. Any route sugges- tions made by this navigation system may never supersede any local traffic regulations or your personal judgment and/or knowledge of safe driving practices. Do not follow route suggestions if the navigation system instructs you to perform an unsafe or illegal maneuver, places you in an unsafe situation, or routes you into an area which you consider unsafe.

Glance at the screen only when necessary and safe to do so. If prolonged viewing of the screen is necessary, pull over in a safe and legal manner and location.

Do not input destinations, change settings, or access any functions requiring a prolonged view of the monitor and/or remote control while you are driving. Pull over in a safe and legal manner and location before attempting to access the system.

Do not use the navigation system to route you to emergency services. Not all locations of emergency service providers such as police and fire stations, hospitals, and clinics are contained in the database. Please use your own judgment and your ability to ask for directions in these situations.

The map database contained within the media (DVD-ROM) in which it is stored is the most recent map data available at the time of production. Because of changes in streets and neighborhoods, there may be situations where the navigation system may not be able to route you to your desired destination. In these cases, use your own personal judgment.

The map database is designed to provide you with route suggestions, it does not take account the relative safety of a suggested route, or of factors which may affect the time required to reach your destination. The system does not reflect road closures or construction, road characteristics (i.e. type of road surface, slope or grade, weight or height restrictions, etc.), traffic congestion, weather conditions, or any other factors which may affect the safety or timing of your driving experience. Use your personal judgment if the navigation system is unable to provide you with an alternate route.

There may be situations where the navigation system may display the vehicle’s location erroneously. Use your own driving judgment in this situation, taking into account current driving conditions. Please be aware that in this situation, the navigation system should correct the vehicle’s position automatically; however, there may be times where you may have to correct the position yourself. If this is the case, pull over in a safe and legal manner and location before attempting operation.

Make certain that the volume level of the monitor is set to a level which still allows you to hear outside traffic and emergency vehicles.

Position the monitor so that glancing at the screen can be performed quickly and easily by the driver. If any adjustments are necessary, pull over in a safe and legal manner and location.

The monitor used with this system should not be placed in a location which hinders the driver’s view of any critical elements necessary to operate the vehicle properly (i.e. the road, mirrors, instruments, vehicle’s surroundings). In addition, the monitor should not be placed in a location which may obstruct the air bags should they deploy.

Remember to wear your seat belt at all times when the car is in motion. This will help you avoid impact with anything in the car’s interior, including the system itself.

Be sure to reset the system before starting operation whenever the system is reinstalled on another vehicle. The navigation system measures the distance with the speedometer pulse. Since the speedometer pulses depend on the vehicle manufacturer and the tire size, when you buy a new vehicle or replace your tires, the speedometer pulses are compared with the distance measured with GPS waves and the distance coefficient is automatically recalibrated.

Do not use a portable telephone or transceiver near the system. Using them may cause noise or operating error to the system, or prevent for the portable telephone or transceiver from proper communications. Use them away from the system.

Please make certain that any other person who intends on using this naviga- tion system reads these precautions and the following instructions carefully.

If there is anything in the manual which you do not understand or are uncertain about the operation of the navigation system, please contact your local Alpine authorized navigation dealer or 1-888-NAV-HELP before using the navigation system.

Should the system become necessary for service or repair, make sure the DVD-

ROM is removed from the main unit. Place the DVD-ROM in its case and ship it along with the main unit.

3

4

Precautions

Points to Observe for Safe Usage

a Read this manual carefully before using this navigation system. It contains instructions on how to use this product in a safe and effective manner.

Alpine cannot be responsible for problems resulting from failure to observe the instructions in this manual.

a This manual uses various pictorial displays to show you how to use this product safely and to alert you to potential dangers resulting from improper connections and operation. Following are the meanings of these pictorial displays. It is important to fully understand the meanings of these pictorial displays in order to use this manual and the system properly.

a Meaning of displays

Warning

This symbol will precede important instructions. Failure to heed them can result in serious injury or death.

Caution

This symbol precedes important instructions. Failure to heed them can result in injury or property damages.

Tips

This indicates supplementary explanation of operation of this system.

Warning

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTEN-

TION AWAY FROM SAFELY DRIVING YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT FOLLOW ROUTE SUGGESTIONS IF THE NAVIGATION

SYSTEM INSTRUCTS YOU TO PERFORM AN UNSAFE OR ILLE-

GAL MANEUVER, OR PLACES YOU IN AN UNSAVE SITUATION OR

AREA.

This product is not a substitute for your personal judgment. Any route suggestions by this system should never supersede any local traffic regulations or your personal judgment or knowledge of safe driving practice.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE

REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

5

6

Precautions

Warning

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN IN-

SERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

Caution

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT

WITH THE CORRECT BATTERY POLARITY

Do not mix new batteries with old batteries and do not replace with other than specified batteries. When inserting the batteries, be sure to observe proper polarity

(+ and –) as instructed.

Battery rupture or chemical leakage can cause an injury or equipment malfunction.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS

Failure to do so may cause injury or damages to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Station for repairing.

CAUTION

CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM

(Bottom side player)

Table of

Contents

Precautions

Precautions ................................................................................ 2

Points to Observe for Safe Usage ............................................ 4

Warning/Caution ........................................................................ 5

Navigation systems ................................................................... 8

Preface

Before Using This

System

Remote control (RUE-4136)

Names of Parts ....................................................................... 10

Remote Control Reference Guide for Head Unit ................ 11

Remote Control Reference Guide for AV Head Unit .......... 12

Replacing the batteries ......................................................... 13

Remote Control Holder Installation ..................................... 13

Main unit

Inserting the DVD-ROM ......................................................... 14

Removing the DVD-ROM ....................................................... 14

Turning the System On ........................................................... 15

Operation

Reference

In case of difficulty .................................................................. 16

Error messages ........................................................................ 17

Specifications ........................................................................... 18

7

Preface

Navigation systems

8

This navigation system uses three different sensing devices to determine the present location and to track the progress of the vehicle. These three sensors are: a GPS (Global Positioning

System) sensor which uses satellites to determine the current position of the vehicle, a gyroscope which determines which direction the vehicle turns, and speedometer pulses which determine how far the vehicle has traveled. Because this system incorporates a gyroscope and a speed sensor, the system will be able to display the vehicle's position and track the vehicle's progress even in areas where the GPS signal may be blocked.

All map data is contained on a removable DVD-ROM. This system integrates this unique map database with the sensors to automatically plot out a route when a destination is entered.

While driving, the navigation system guides you along the route with pictorial displays and verbal prompts.

GPS (Global Positioning System)

This system receives signals from 3 or more

GPS satellites (operated by the United States

Department of Defence). They orbit at an altitude of 13,100 miles (21,000 kilometers) and determine the vehicle’s position through principles of triangulation.

There may be a delay before the actual vehicle's position is displayed

Determination of the present vehicle's position starts when the ignition key is turned to the ACC or ON positions and ends when the key is turned OFF. When the key is first turned to the ACC or ON positions, there is a slight delay of approximately one to two minutes before the present vehicle's position can be displayed.

Error from the actual position of the vehicle

When GPS signals can be received from four or more satellites, three dimensional positioning

(the latitude, longitude, and altitude) of the vehicle can be determined. In this case, the error from the actual position of the vehicle is in the range of 100 to 655 feet (30 to 200 meters).

When GPS signals can only be received from three satellites, only two dimensional positioning (latitude and longitude) can be determined, resulting in a slightly increased error. When

GPS signals can only be received from less than three satellites, positioning of the vehicle through GPS is not possible. In addition to the inherent errors from GPS, the error rate can also be increased if the United States Department of Defense deliberately changes the accuracy rate.

Gyroscope

The gyroscope is a sensor that accurately measures the angle by which the direction of a vehicle or other moving body changes.

Gyroscopes are used in inertial navigation systems for airliners and ships. In this navigation system, the gyroscope is used together with the speed sensor, making it possible to display the present position of the vehicle even in locations where GPS signals may be blocked.

Locations where GPS signals are received easily

GPS signals are received best in areas where there are no tall buildings, trees, or other tall objects that can obstruct the signals.

Locations where GPS signals cannot be received

GPS signals cannot be received in areas listed below. However, the gyroscope and speed sensor will continue to provide data to track the vehicle’s progress along the route without interruption.

In tunnels and indoor parking lots

Locations surrounded by tall buildings

Locations surrounded by tall trees

On the bottom level of double-decker expressways

When a GPS satellite is low on the horizon (angle below 10°), obstructions sometimes make normal reception impossible

9

Before Using This System

Remote control (RUE-4136)

Joystick/ENTER button

Selects highlighted items within menus and moves map displays and vehicle position icon. Press the ENTER button to select any highlighted function, screen icon or street segment.

Zoom/Quick Scroll buttons

Changes map magnification ratio upward or downward in 9 steps

(1/32, 1/16, 1/8, 1/4, 1/2, 2, 8, 32 and 128 miles). Scroll through street, city or category listings a page at a time.

AUDIO/NAV.button

Switches between Audio and

Navigation operations.

Pressing this button illuminates the highlighted portion of the display.

VOICE button

Initiates vocal instruction for next route maneuver or repeats last instruction.

LIST button

Displays list of the streets currently set for the route. To return to the guidance mode, press the MP/RG button.

PLAN button

Allows you to advance to the next destination in Today's Plan list.

DEL button

Deletes the character previously input.

ON/OFF button

Turns the pictorial display on or off.

DEL DEST. button

Deletes current destination.

Names of the Parts

Remote Control transmitter

Transmits the remote control signals.

Aim toward the display monitor for operation.

V

O

L.

M

UT

E

VOICE

ENTER

/

A PROC.

MENU

BAN

D

CANC.

LIST

1 DTR 2 3

N/H

PLAN

4

7

DEL.

ON/OFF

5

8

FUNC

.

0

OP/C

L

DEL. DEST

6

9

OK

V SEL.

SO

UR

SE

MP

/RG

Status indicator

Illuminates when remote is transmitting.

MP/RG button

Toggles between Detailed Map

Display and Basic Guide Display during guidance. Switches directly to Map when not in guidance.

MODE button

Press this button to input numerals using the numeric keypad. The numerals can be input while the status indicator blinks.

MENU button

Displays the main menu bar.

CANC. button

Cancels current display screen and switches back to previous screen with menus.

N/H button

Toggles between North Up and

Heading Up orientation.

DTR (DETOUR) button

Automatically recalculates route if a road block or traffic congestion is encountered.

Numeric Keypad

Use these buttons to enter Phone numbers, address numbers or street names containing numbers

(i.e., 42nd St.).

OK button

Executes numeral inputtings and starts searching.

10

Tips a If an operation is not accepted, the navigation system beeps.

a The Alpine head unit can be operated with the remote control.

For details, refer to pages 11 and 12.

a After pressing the MODE button, the following buttons will be pressed while the status indicator is blinking : numerals (0 to 9), DEL., and OK.

Note: Due to continuous product improvement, specifications are subject to change.

Remote control (RUE-4136)

Remote Control Reference Guide for Head Unit

When you use the Alpine Head Unit, you can operate it with the remote control (supplied with

NVE-N852A.) Change AUDIO/NAV. Switch, on the side of the remote control, to AUDIO.

2

%

3

5

7

8

9

"

V

O

L.

SO

UR

SE

ENTER

/

MP

/RG

M

UT

E

VOICE

A PROC.

MENU

BAN

D

CANC.

LIST

1 DTR 2 3

N/H

PLAN

4

7

DEL.

ON/OFF

5

8

FUNC

.

0

OP/C

L

6

9

OK

DEL. DEST

V SEL.

1

&

4

6

$

!

#

9

!

"

#

$

%

&

2

3

4

5

6

7

8

No.

1

Button

:/J

VOL.

A PROC.

SOURCE

MUTE

BAND

FUNC.

OP./CL.

9

8

ON/OFF

V SEL.

Numeric Keypad

AUDIO/NAV.

MODE

Description

PUSH: PLAY/PAUSE

Radio mode: Preset Selection (C/B), SEEK UP/DOWN (@/A)

CD/MD Player/Changer mode:

Disc Selection (C/B), Music Sensor (@/A), BW/FF (@/A Hold)

Tape Mode: Program Sensor (C/B), REW/FF (@/A Hold)

Volume Control

Audio Processor

Source Selection

Audio Mute

Radio Band Selection

Display Angle DOWN (only pressing MODE button.)

Display Angle UP (only pressing MODE button.)

Power ON/OFF

Switching AUDIO/NAV. Switch to AUDIO side.

Operates 9 to ! (Flashes the Status Indicator for 5 seconds.)

11

Before Using This System

Remote control (RUE-4136)

Remote Control Reference Guide for AV Head Unit

When you use the Alpine head unit with the monitor, you can operate the AV head unit with the remote control (supplied with NVE-N852A.) Change AUDIO/NAV. Switch, on the side of the remote control, to AUDIO.

2

%

3

5

V

O

L.

SO

UR

SE

ENTER

/

MP

/RG

M

UT

E

VOICE

A PROC.

MENU

BAN

D

CANC.

1

&

4

6

7

8

9

"

LIST

1 DTR 2 3

N/H

PLAN

4

7

DEL.

5

8

FUNC

.

0

OP/C

L

6

9

OK

ON/OFF

DEL. DEST

V SEL.

$

!

#

12

7

8

9

!

"

#

2

3

4

5

6

$

%

&

No.

1

Button

:/J

VOL.

A PROC.

SOURCE

MUTE

BAND

FUNC.

OP./CL.

9

8

ON/OFF

V SEL.

Numeric Keypad

(1 to 6)

AUDIO/NAV.

MODE

Description

PUSH: PLAY/PAUSE (CVA-1003)

PUSH: Changes the modes as follows: Volume/Bass/Treble/Fader

(CVA-1005/CVA-1006/IVA-C800/IVA-C801)

PUSH hold: PLAY/PAUSE

(CVA-1005/CVA-1006/IVA-C800/IVA-C801)

Radio mode: Preset Selection (C/B), SEEK UP/DOWN (@/A)

CD/MD Player/Changer mode:

Disc Selection (C/B), Music Sensor (@/A), BW/FF (@/A Hold)

Tape Mode: Program Sensor (C/B), REW/FF (@/A Hold)

Volume Control

Audio Processor

Source Selection

Audio Mute

Radio Band Selection

This function button has the same function as the following models: CVA-1003/CVA-1005/CVA-1006/IVA-C800/IVA-C801.

Indash Display OPEN/CLOSE (only pressing MODE button.)

Indash Display Angle DOWN(only pressing MODE button.)

Indash Display Angle UP(only pressing MODE button.)

Power ON/OFF

Switching V.SEL

This numeric keypad has the same function of the preset buttons

(1 to 6) as the following models: CVA-1003/CVA-1005/CVA-1006/

IVA-C800/IVA-C801.

Switching AUDIO/NAV. Switch to AUDIO side.

Operates 8 to ! (Flashes the Status Indicator for 5 seconds.)

Remote control (RUE-4136)

Tips a Avoid dropping this remote control or placing it in pants pockets. Doing so may cause damage to the case or buttons, shorten battery life or cause the system to malfunction.

a To clean this device, wipe it with a dry cloth. (If it is extremely dirty, wipe it with a wrung damp cloth.) Never use benzene, paint thinner or harsh chemicals which can cause deterioration of the case or paint.

a Do not expose this remote control to direct sunlight (i.e. on the dashboard) for extended periods of time.

Replacing the batteries

Use two AAA-type batteries.

1 Open the cover

Opening the battery cover.

Push on the cover and slide it as indicated by the arrows then the cover will be removed.

2 Replace the batteries

Replacing the battery.

Remove the old batteries. Insert new ones matching the (+) and (–) polarities as shown in the diagram inside the remote control.

3 Close the cover

Closing the cover.

Push the cover in the arrow direction until a click is heard.

Remote Control Holder Installation

• If direct sunlight reaches the remote control mounted on the holder, remove the remote control from the holder and put it in the glove compartment.

• If double-sided adhesive tape cannot install the holder securely, use screws.

Note: Attach the blue protective paper side of double-sided tape onto the console box, etc.

Remote Control

Holder

Double-Sided

Adhesive Tape

(Before attaching the tape, make sure the mounting location is free from dust or dirt.)

Protective Paper

Remote

Control

Reinforcing Screws

Console Box etc.

13

Before Using This System

Main unit

DVD-ROM compartment door

Inserting the DVD-ROM

1 Press the door in gently then slide it downwards.

If a DVD-ROM is already in the main unit, the DVD-ROM is automatically ejected part way.

2 Insert the DVD-ROM with the label side facing up.

As you partially insert the DVD-

ROM into the unit, it is automatically pulled into the navigation system.

Tips

Do not touch the surface of the disc directly with your fingers.

Tips a Keep the door closed except when changing the DVD-ROM.

a Before inserting or removing the DVD-

ROM, always turn the ignition key to

ACC or ON. You cannot remove or insert the DVD-ROM with the ignition key turned OFF.

a Do not insert any DVD Video discs or map DVD-ROM.

Removing the DVD-ROM

1 Press the door in gently then slide it downwards.

The DVD-ROM is automatically ejected part way.

If the DVD-ROM is not removed, it is automatically drawn back into the player after a while.

Caution Never close the door while the

DVD-ROM is being unloaded.

Doing so could scratch the DVD-

ROM or damage the player.

14

3 Close the door.

Be sure to close the door to prevent dust from getting inside.

Tips a The DVD-ROM is a delicate device. Avoid dropping or scratching it.

a Keep the DVD-ROM away from dust and moisture.

Operation

Turning the System On

1 Turn the ignition key to the ACC or ON position.

The opening screen appears on the monitor display.

2 Insert your DVD-ROM. For instructions on inserting the DVD-ROM, see page 14.

3

After completing the above steps, please refer to the DVD-ROM user's guide to learn more about your navigation system software.

15

16

Reference

In case of difficulty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Symptom

No operation/

No display

Cause

Blown fuse

Ambient temperature over

122°F (50°C)

Moisture condensation

Solution

Replace with a fuse of the same rating.

Lower the temperature in the vehicle below 122°F (50°C) by driving with the windows open or air conditioner on.

Allow enough time for condensation to evaporate (about 1 hour, depending on ambient temperature and humidity).

Drive the vehicle in an area of good GPS reception to allow the unit to recalibrate itself.

The present vehicle position cannot be measured correctly.

The vehicle position changed after the ignition was switched off.

• Movement on a ferry boat

• Rotation of a parking lot turntable

• Movement by tow truck

Poor satellite configuration Vehicle position is displayed incorrectly on the screen

Screen not displayed

Measurement is 2 dimensional

The navigation monitor is turned off.

"CANNOT READ

DISC" is displayed for a certain operation.

The disc is dirty.

The pickup lens is dirty.

Unstable operation

The remote control batteries are wearing out.

Move to a location where GPS satellite reception is easy.

Press the ON button on the remote control.

Clean the disc.

Have the pickup lens cleaned periodically.

Replace the remote control batteries.

Error messages

Various messages are displayed on the screen during operation. In addition to the messages telling you the current status or providing guidance for the next maneuver, the following error messages may appear. If one of these error messages is displayed, carefully follow the instructions in the solution column.

Message

Please insert DVD-

ROM/map data disk.

DVD-ROM unreadable.

Please check DVD-

ROM.

DVD-ROM being checked.

Menu inoperable while driving. Please bring vehicle to stop at safe place and pull parking brake before using this function.

Cause

• The disc has been removed.

• There was no disc in the system when the power was switched on.

• A disc that the system cannot read has been loaded.

• The disc is dirty or upside down.

Solution

Insert the disc (sold separately).

Insert the map disc.

• The disc cannot be read because of condensation.

Take out the disc, check if it was upside down, clean it if necessary, then re-insert it.

Take out the disc, allow enough time for condensation to evaporate (about 1 hour), then re-insert the disc.

When the disc check is complete, the following screen is displayed automatically.

• A disc was just inserted

• Vibration or the like made it impossible to read the disc.

• The MENU button was pressed while the vehicle was running.

• A menu selection operation was carried out while the vehicle was running.

Move the vehicle to a safe location, stop, and engage the parking brake, then carry out this operation.

17

18

Reference

Specifications

Power requirement 14.4 VDC (11 – 16 V allowable) negative ground

14°F to 122°F (–10°C to +50°C) Operating temperature (main unit)

Antenna type

Reception frequency

Reception sensitivity

Reception method

Current consumption

Pickup

External dimensions (W

× H × D)

Weight

Micro-strip planar antenna

1575.42 ± 1 MHz

–130 dB max.

Parallel 12 channels

Typical: 1.0 A

Maximum: 2 A

Wave length: 655 nm

Laser Power: CLASS II

Navigation unit

Antenna

Remote control

7—

9

4 16

(196

× 50 × 191.5 mm)

5 9

8

(42 × 14 × 51 mm)

2 × 1— × 4—"

32 32

(51

× 36 × 118 mm)

Navigation unit 3 lbs. 4 oz

(1.474 kg)

Antenna 4.6 oz

(0.13 kg)

Remote control 2.1 oz

(0.060 kg)

Accessories

Product

Installation parts

Antenna

Remote control

Batteries (AAA)

Power connector

Display connector

Q'ty

1 set

1 set

1 set

2

1

1

Product

Hardware Manual, card

Q'ty

1 set

Note

19

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals