Siemens FIREFINDER-XLS System information

FireFinder XLS
FireFinder XLS Fire Alarm Control Panel
• Standard 2500 addressable point
capacity system
• Networkable to other FireFinder XLS
systems
• Powerful, easy-to-use programming
capabilities
• Fully Field Programmable Via Windows
Laptop Computer
• 6" Backlit LCD display
• User-friendly system interface
• Touch screen for maintenance
operations and function keys
• ew Global Annunciation and
N
Control Capability
• Multi-Language Display
• Universal AC power input - 120/
240VAC, 50/60Hz
• 12 amps of system power, expandable
to 48 amps
• Numerous Relays - alarm, trouble,
programmable…
• SureWire addressable loop technology
• Polarity insensitive detection circuits
(Patented)
• Useful diagnostic LEDs on all cards
• Supports FirePrint application specific
detection
• Security Device Monitoring
• Sprinkler Supervision
• Intelligent/Analog Detection Circuits,
style 6 (Class A) or Style 4 (Class B)
• Detector Sensitivity Readout/Printout
per NFPA 72
• Supervised Remote Printer
• 32 Character Custom messages
• ew Thermal Strip Printer
N
• New Alphanumeric Pocket Pager Interface
• UUKL Listed for Smoke Control
•
UL, ULC Listed, FM, CSFM, &
NYMEA Approved
• Multiple Command Stations
• Menu Driven Operator Commands
• 5000 Event History Logging with
On Line & Off Line Reports
• User Help Screens
• Multiple Levels of Password
Protection
• Automatic Environmental
Compensation for Smoke Detectors
• Alarm verification by Device or Zone
• Logic Controlled Output Functions
• Time Based Controlled Output
Functions
• Holiday Schedule
• City Tie/Leased Line
• Coded Outputs
• 200 notification appliance circuits
capacity
• Up to 4.0 amps (24VDC) per NAC
• Built-in strobe synchronization
protocol
• Supports Pre-Action, Deluge and
agent releasing
• Voice evacuation system optional
• Modular assembly
• NEC 760 Power Limited Circuits (UL
864 Compliant)
• Intelligent Interface to Building/
Process Management Systems
• Degrade mode operation
• Distributed Processing
• Operates as Interactive Peer with
other XLS or XLSVs in a XNET
network
• Pre-Alarm Operation
• Supports Single Person Test, “Walk Test”
• NCCG Graphics support
Introduction
FireFinder XLS is a microprocessor based advanced life
safety system. Its 6" display and large lighted buttons
makes it the most intuitive fire alarm user interface in the
industry. Its use of the unique multiprocessor "Network"
design along with its ability to utilize both analog and
conventional detection devices make it an extremely
flexible and configurable life safety system.
The XLS is ideally suited for commercial, institutional and
industrial fire detection and notification applications. It
complies with the requirements of NFPA Standard 72 and
is listed by Underwriters Laboratories under their standard
UL-864. Underwriter's Laboratories of Canada also lists it
for fire applications under ULC-S527. It is approved by
Factory Mutual as well as CSFM and NYMEA for use in
those specific locales.
In addition to the standard fire applications, XLS is listed
by Underwriters Laboratories under the category UUKL for
smoke control. XLS can be used as a listed Fireman's
Smoke Control Station in high-rise office buildings, malls
and other large structures.
XLS is listed by UL and approved by FM for releasing
Halon 1301, Sinorix clean agent systems and pre-action or
deluge sprinkler systems. These include foam or water
applications. XLS follows the releasing requirements
specified in the NFPA 12 Standards 12A, 13 and 2001.
CATALOG NUMBER
6300
Description
The basic XLS control unit consists of the following
subassemblies: PMI Person Machine Interface; PSC-12
Power Supply; DLC Device Loop Card; ZIC-4A Zone
Indicating Card; CC-5 Card cage; ID-SP Inner Door Blank
Single Plate; CAB-1, CAB-2 or CAB-3 enclosures. Optional modules that can be installed with the XLS System
include: CC-2 Card Cage; NIC-C Network Interface Card;
ZIC-8B/ZIC-2C Zone Indicating Card 8 circuits; CRC-6
Control Relay Card; OCM-16 Output Control Module;
SCM-8 Switch Control Module; LCM-8 LED Control
Module; FCM-6 Fan Control Module; SIM-16 Supervised
Input Module; PSX-12 Power Supply Extender; RNI Remote Network Interface; RPM Remote Printer Module;
SSD System Status Display; MDACT Multi-Point Digital
Alarm Communicator; REMBOX2 Two Module Remote
Enclosure; REMBOX4 Four Module Remote Enclosure.
The XLS panel is compatible with a full line of intelligent
initiating devices highlighted by the FirePrint Application
Specified Detectors, models HFP-11 and HFPT-11. It is also
compatible with the NCC series of graphics command
centers.
The FireFinder system is controlled and operated from the
PMI. The intuitive person machine interface uses large
lighted buttons to prompt users as to the next correct
system operation that is available (Acknowledge, Silence,
Unsilence Audible or Reset).
DLC Device Loop Card
DLC Device Loop Card
The DLC Device Loop Card is the interface for connection
with FireFinder XLS detectors and initiating devices
including manual stations, control and input devices. The
DLC plugs into one slot of the CC-2 or CC-5 card cage.
Programming the DLC is accomplished using the
FireFinder XLS Zeus configuration tool. The DLC takes one
address on the network and communicates with two
device circuits with a total of up to 252 detectors and
devices. The DLC has 12 LEDs for diagnostic purposes
and provides ground fault detection and zone isolation
circuitry.
PMI Person Machine Interface
PMI Person Machine Interface
The Person Machine Interface is the heart of the FireFinderXLS system. The PMI serves as both operator interface
and central microprocessor for the system. From the PMI
the user can acknowledge events, control the system
notification appliance circuits and reset the system.
Detailed information about the nature and location of the
events can also be displayed.
The PMI contains the site-specific program configuration created in the Zeus tool. The controller in the PMI provides
all system logic and supervision.
The PMI contains a large 6" (1/4 VGA) monochrome LCD
display, touch screen and LED's for displaying system
status. An audible sounds when there are unacknowledged
events on the PMI. The display is surrounded by keys that
are used to control the displayed information and to
navigate through these screens. Keys are also provided to
obtain "Help" and to enter into the menu features of the
PMI.
ZIC-4A Zone Indicating Card
ZIC-4A Zone Indicating Card
The Zone Indicating Card ZIC-4A provides four fully supervised programmable output circuits for use on the
FireFinder XLS Fire Alarm Control Panel. The ZIC-4A
supplies four Class B (Style Y) or Class A (Style Z) type
output circuits, power limited to 4.0 amps maximum per
circuit. Each circuit can be independently programmed for
use with listed audible or visual notification appliances,
listed emergency audio speakers, municipal tie boxes,
leased lines, or as releasing circuits. The ZIC-4A plugs into
one slot in the CC-5 or CC-2 Card Cage, and has on-board
LEDs for system status and troubleshooting. Indication of
power, communication, internal operation, and ground fault
conditions are provided, as well as indication of circuit
activation or trouble conditions.
The NIC-C Card has diagnostic LEDs that indicate Card Fail,
CAN Fail, HNET Fail, XNET Fail, Ground Fault, Loop A Fail
and Loop B Fail, as well as LEDs to indicate Power, Style
and Active Networks.
ZIC-8B/ZIC-2C
ZIC-8B/ZIC-2C
The Zone Indicating Card ZIC-8B provides eight fully
supervised programmable output circuits for use on the
FireFinder XLS Fire Alarm Control Panel. The ZIC-8B
supplies 8 Class B (Style Y) type output circuits, power
limited to 2.0 amps maximum per circuit. Each circuit can
be independently programmed for use with listed audible
or visual notification appliances, or listed emergency audio
speakers. The ZIC-8B plugs into one slot in the CC-5 or
CC-2 Card Cage, and has on-board LEDs for system status
and troubleshooting. The ZIC-2C mounts directly on the
ZIC-8B, and allows each of the ZIC-8B output circuits to be
used for 2-channel voice applications. Indication of power,
communication, internal operation, and ground fault
conditions are provided, as well as indication of circuit
activation or trouble conditions.
HLIM Line Isolator Module
HLIM Line Isolator Module
The HLIM loop isolator module provides short circuit
protection on FireFinder XLS intelligent device circuits
(DLC). When a short is detected by the HLIM, it isolates
the affected segment of the circuit, allowing the remaining
devices to continue operation.The HLIM is self-restoring,
automatically reconnecting to circuit segment when the
fault is removed.
It can be wired in either a Style 4 or Style 6 configuration.
The HLIM does not occupy a device address on the DLC
circuit and requires no programming. Up to fifteen HLIMs
may be installed on each DLC loop.
HCP
NIC-C
NIC-C
The Model NIC-C Network Interface Card provides HNET or
XNET network communications between enclosures. In
addition to the HNET or XNET communication the NIC-C
provides CAN network communication within an enclosure
or external to the enclosure. The HNET or XNET can be
wired Style 4 or Style 7. The CAN network can be wired
Style 4 only.
When the NIC-C is used for HNET communications it
provides communication between enclosures on a single
system.
When the NIC-C is used for XNET communications it
provides communication between systems. The maximum of XNET NIC-Cs on a single system (single node) is
one, for a total of 64 XNET NIC-Cs on a Peer-To-Peer
Networked System.
HCP
The HCP provides an intelligent control point for the
FireFinder XLS Control Panel. The HCP can be
programmed as an independent, remotely located telephone zone, speaker zone or notification appliance circuit.
The HCP is designed to be used with the Siemens Fire
Safety notification appliance product line.
The HCP communicates through the DLC analog loop and
can be wired either Class A (Style Z) or Class B (Style Y).
The 24 VDC power input comes from either the control
panel or from any UL listed power limited, auxiliary power
supply.
rooms. Also, the CDC-4 can be used to upgrade Siemens
conventional fire alarm panels to the FireFinder XLS
system without requiring detector replacement.
CRC-6 Controllable Relay Card
CRC-6 Controllable Relay Card
The Controllable Relay Card (Model CRC-6) is used with
the FireFinder XLS Fire Alarm Control Panel. It is designed
to provide auxiliary control of building functions such as
door holder release, elevator capture, smoke control, lock
release, etc. The CRC-6 plugs into one slot in the CC-5 or
CC-2 Card Cage. It provides six fully programmable relays.
Each relay contains one set of SPDT contacts rated at 4
Amps 30 VDC/120 VAC resistive and 3.5 amps 120 VAC
inductive (0.6 P.F.).
SIM-16 Supervised Input Module
SIM-16 Supervised Input Module
The SIM-16 Supervised input Module is a remotely
located, general-purpose input module. It provides sixteen
input circuits for remote system monitoring. Each input
can be individually programmed as supervised (dry contact
only) or unsupervised (general purpose input.) The SIM-16
has two Form C relays. The relays and inputs are programmed using the Zeus system programming tool.
CC-2 Card Cage-2 Slots
CC-5 Card Cage-5 Slots
CC-5/CC-2 Card Cages
The CC-5/CC-2 card cages provide the physical mounting
location and all wiring connection points for all fire and
voice system options cards for the FireFinder-XLS system.
The CC-5 has 5 slots and the CC-2 has two slots.
All cards plugged into the CC-5/CC-2 card cage communicate with other FireFinder-XLS modules via a common data
bus. Connectors are provided on the left & right side of the
CC-5 to connect a (60) pin cable for communications with
the FireFinder-XLS's operator interface, power supplies and
amplifiers modules.
All field wiring to devices and circuits terminates on the
CC-5/CC-2 card cage. All cards designed for use with the
CC-5/CC-2 route their field wiring terminations to the "top"
of the CC-5/CC-2. These connections are all power limited.
Internal wiring connections distribute 24VDC to cards or
high level audio signals (depending on application used)
connect to the "bottom" of the CC-5/CC-2. These connections are all non-power limited.
All wiring connections to the CC-5/CC-2 are to removable
terminal blocks. Terminal blocks are rated for use with wire
sized 12AWG to 24AWG. Each connector is numbered to
make wiring terminations to the correct position on the
terminal block simple and reduce the potential for wiring
errors.
SCM-8
CDC-4
CDC-4
The Model CDC-4 Conventional Detector Card is used to
monitor Siemens Fire Safety conventional detectors on the
FireFinder XLS system. The CDC-4 can be used in applications where conventional detectors are more suited than
addressable detectors, like hallways or large meeting
SCM-8 Switch Control Module
The SCM-8 is a FireFinder XLS option module which
provides manual control of the Emergency Voice Evacuation System or manual fire system control. Each SCM-8
module provides eight momentary pushbutton switches
and 16 LED's to indicate their status. Each switch is
assigned two LED's and a label to indicate the switch's
programmed usage. The label slides behind a clear
protective membrane. One of the LED's assigned to each
switch is a dual color LED used to indicate what type of
signal is active.
indicate Fan/Damper/Motor status: OFF (Red LED), ON
(Green LED), TROUBLE(Yellow LED).
Each SCM-8 and each switch is fully programmable and
may be used to control speaker circuits, and awide range
of general system functions such as All Call, All Evac,
Warden's Page, Speaker, etc. Anynumber of circuits may
be grouped and controlled bya single switch. Switch
usages and zone groupings are assigned using the ZEUS
system programmingsoftware.The SCM-8s are mounted
on a hinged panel as a partof the FireFinder XLS Command
Console enclosure.
PSC-12 Power Supply Charger Module
LCM-8
LCM-8 LED Control Module
The LCM-8 is an FireFinder XLS option module which
provides LED annunciation of system activity. Each LCM8 module contains eight groups of 2 LED's, each of which
can be assigned to desired outputs using the ZEUS
programming software. Eight LED's are dual color capable
of being lighted either RED or GREEN flashing or steady.
The remaining LED's are AMBER flashing or steady. A
space is provided for labeling of LED functions. The label
slides behind a clear protective membrane. The LCM-8
dimensions are identical to the SCM-8 and is mounted on
the same hinged panel as a part of the FireFinder XLS
Command Console enclosure.
PSC-12 Power Supply Charger Module
The PSC-12 is a high current power supply that provides
the FireFinder-XLS primary regulated 24VDC power to
operate. It is rated at 12Amps (Alarm)/5Amps (Standby)
and has a built in battery charger capable of charging up to
100AH batteries. The PSC-12 is an addressable intelligent
microprocessor controlled module that communicates it
status to the system operator interface (PMI). The PMI is
able to query the status of the power supply to obtain
information regarding system charging current, terminal
loading information, ground fault conditions and more.
PTB Power Termination Board
PTB Power Termination Board
The PSC-12 comes packaged with a module called the
PTB. The PTB is the Power Termination Board and is
required for operation with the PSC-12. The PTB filters the
power from the incoming AC mains and distributes it to
the PSC-12 power supply and the optional PSX-12 power
supply extender.
FCM-6
FCM-6 Fan, Motor, dampers Control Module
The FCM-6 is an FireFinder XLS command console option
module that provides manual control of building HVAC
system fans, motors, and dampers. EachFCM-6 module
provides (6) sets of (3) push button switches for manual
system control. Each switch has3 associated LEDs to
The PTB has an optional connector that can be used during
system installation, commissioning & service to provide
the technician with a place to plug in their laptop computer
if required. The AC-ADPT is an optional accessory cable
that allows connection on one side to the PTB via a keyed
connector and on the other end directly into to the laptop's
transformer. Most laptop computer external power transformers have removable AC power cords which can be
replaced by the AC-ADPT to temporarily provide an AC
power source for laptop computer used during system
installation, service and maintenance calls when needed.
SSD Series
PSX-12 Power Supply Extender
PSX-12 Power Supply Extender
The PSX-12 is a high current auxiliary power supply that
expands the FireFinder-XLS systems main PSC-12 power
supply and battery charger with an additional 24VDC
power. It is rated at 12Amps.
RNI Remote Network Interface
RNI Remote Network Interface
The Model RNI Remote Network Interface provides a
connection point for use with equipment mounted in a
remote lobby enclosure on the FireFinder XLS Fire Alarm
Control Panel. It is used to provide additional input, output
and control features to the system remotely from the main
control panel. These additional features may include control
switches and indicators (SCM-8, LCM-8 and FCM-6),
remote emergency paging microphones or telephones
(LVM, FMT), or controls used in graphic annunciators (SIM16, OCM-16) or System Status Display with the ability to
acknowledge alarms, silence audibles and reset the
system (SSD-C-REM). The RNI allows the PMI to be
mounted in the REMBOX2 or REMBOX4 remote lobby
enclosure.
SSD Series
The SSD Series System Status Display is a remote LED/
LCD display that shows the local status of a FireFinder XLS
system. An LED illuminates when alarm, supervisory,
trouble, and security events occur on the system. A fourline LCD will give details of the event in alphanumeric
form. The display can be toggled to display additional
events. Optional remote system control capabilities are
available.
Models SSD-C, SSD-C-INT, and Model SSD-C-REM have
three additional control buttons for acknowledging events,
silencing audible circuits, and resetting the system. The
SSD-C and SSD-C-INT have an integral keyswitch that
enables these control buttons to operate. The SSD-C-REM
is located within a locked cabinet, so no additional
keyswitch is required for enabling the control buttons.
CAB1 Single Row Enclosure
RPM Remote Printer Module
RPM Remote Printer Module
The Model RPM Remote Printer Module provides a means
of connecting the FireFinder XLS system to a printer, like
the PAL-1, for creating a hard copy of system status and
configuration reports. Simultaneously, it provides an
output port that can be configured to communicate with
external systems.
CAB1 Single Row Enclosure
The Model CAB1 is the smallest of the FireFinder XLS
enclosures. It can house a single CAB-MP cabinet mounting plate for mounting card cages, power supplies and bulk
amplifiers. The CAB1 also has four mounting slots on the
inner door for mounting a PMI interface and Model ID-MP
switch module brackets. The CAB1 comes complete with
a black back box, black inner and outer doors, a single lock
and key set on the outer door, a single CAB-MP cabinet
mounting plate (installed), and a single OD-LP outer door
lens plate (installed). A red version called the CAB1-R is
also available. Approximate size is 27" high, 26" wide, and
8" deep.
CCU/M Alphanumeric Pager Interface
MDACT - Multi-Point Digital Alarm
Communicator Transmitter
MDACT - Multi-Point Digital Alarm
Communicator Transmitter
The Model MDACT Multi-Point Digital Alarm Communicator Transmitter is used in FireFinder XLS systems where
point identification of alarm, supervisory, security and
trouble events is required at Central or Remote Receiving
Stations. An intelligent RS-485 communications protocol
transmits all system information to the MDACT. The
installer selects the specific events, or groups of events,
that are to be transmitted from the MDACT over phone
lines to listed receiving station equipment. The MDACT
can transmit point information via Ademco Contact ID and
the SIA protocol. For installation, a MOM2-XMP Mounting
Plate, MOM-2 card cage, and an XMI Interface Card are
required.
CCU/M Alphanumeric Pager Interface
The CCU/M is an ancillary module that connects to the
RPM to transmit FireFinder XLS status information in text
message format to an alphanumeric pocket pager.The
CCU/M can be connected to an exiting phone line and can
dial out to a pager using its onboard modem to transmit
information via a paging service. The CCU/M can also
connect directly to an existing on-site paging system.
Through programming, the CCU/M can send different
types of events to different pagers. Up to 8 different
messages can be sent to pagers directly from CCU/M.
Alarms, Troubles, Supervisory, Security, Arm/Disarm,
Status Points, Audible status and Reset can be directed to
all or only certain alphanumeric pocket pagers.
CAB2 Two Row Enclosure
TSP-40A Thermal Strip Printer
TSP-40A Thermal Strip Printer
The TSP-40A is a thermal strip printer designed for use
with the FireFinder XLS system. The TSP-40A acts as
event logging device providing a permanent history report
of all system activity. It mounts in the FireFinder XLS
CAB1, CAB2 or CAB3 enclosure and its printout is visible
through a window in th locked enclosure door. Printouts
are automatically spooled on a take-up reel for easy record
storage.
CAB2 Two Row Enclosure
The Model CAB2 is the mid-sized FireFinder XLS enclosure capable of housing up to two CAB-MP cabinet
mounting plates. The inner door has two rows of four
mounting slots. The outer door has space for mounting
two outer door plates (Models OD-LP, OD-BP or OD-GP).
The outer door can be configured to open from either side.
The CAB2 consists of the CAB2-BB back box, the CAB2BD black inner and outer door package, two CAB-MP
cabinet mounting plates, and one OD-LP lens plate. The
outer door has a single lock and key set installed. A red
version called the CAB2R is also available. Approximate
size is 45” High, 26” wide, and 8” deep.
CAB-MP Cabinet Mounting Plate
CAB3 Three Row Enclosure
CAB3 Three Row Enclosure
The Model CAB3 is the largest single FireFinder XLS
enclosure available. It can house up to three CAB-MP
cabinet mounting plates in the enclosure, and three rows
of inner door mounting slots. The outer door can be
configured to open from either side. The CAB3 consists of
the CAB3-BB back box, the CAB3-BD black inner and outer
door package, three CAB-MP cabinet mounting plates, and
one OD-LP lens plate. The outer door has two locks and
key sets installed. A red version called the CAB3R is also
available. Approximate size is 63" high, 26" wide, and 8"
deep.
Enclosure Trim Kits
Trim kits are available for all system enclosures for semiflush mounting applications. The Model CAB1-TK (for black
enclosures) and the Model CAB1R-TK (for red enclosures)
fit the CAB1 and CAB1-R enclosures. Similarly, the
CAB2-TK and CAB2R-TK fit the CAB2 enclosure, and the
CAB3-TK and CAB3R-TK fit the CAB-3 enclosure.
Remote Transponders
The FireFinder XLS system can use remote transponders
for mounting additional modules like amplifiers without
requiring a PMI or any control switches. Special doors are
available for systems using CAB2 or CAB3 remote
transponders. These doors, Models CAB2-XBD and
CAB3-XBD, omit the unused inner door and come complete with ventilation louvers built into the door. The
CAB2-XBD fits on a CAB2-BB and the CAB3-XBD fits on a
CAB3-BB. The CAB2-XBD and CAB3-XBD are supplied in
black. Red versions called the CAB2-XRD and CAB3-XRD
are also available. Complete box and door kits are available
as Model CAB2-X and Model CAB3-X.
CAB-MP Cabinet Mounting Plate
The Model CAB-MP cabinet mounting plate provides
mounting for a single row of modules in a FireFinder XLS
cabinet. Four module spaces are available on the CAB-MP.
The CAB-MP is used to mount the CC-5 card cage, the
CC-2 card cage, the PSC-12 power supply, the PSX-12
power supply extender, and the ZAM-80/180 zone amplifiers.
ID-MP Inner Door Mounting Plate
ID-MP Inner Door Mounting Plate
The Model ID-MP inner door mounting plate is mounted on
the inner door of a CAB enclosure. ID-MPs are used to
mount Model SCM-8 switch control modules, Model
LCM-8 LED control modules, or Model FCM-6 fan control
modules. Four mounting plates are included in each Model
ID-MP. Each mounting plate has four spaces for control
modules, and can hold either four SCM-8s (one control
module space each), four LCM-8 (one control module
space each), or two FCM-6s (two module spaces each).
Combinations are also allowed. Blank spaces in the ID-MP
can be covered using the Model BCM blank control
module plate. Up to four ID-MPs can be mounted in a
single row on the inner door.
ID-SP Inner Door Blank Single Plate
ID-SP Inner Door Blank Single Plate
The Model ID-SP is used to cover any single module blank
spaces on the inner door not used to mount the PMI or an
ID-MP. Up to four ID-SPs can be mounted in a single row
on the inner door. Two blank plates are included in each
Model ID-SP.
ID-FP Inner Door Full Blank Plate
The Model ID-FP is a blank plate that covers the full
opening of the row on an inner door. It is used for applications requiring full dead front protection. A single full blank
plate is included in the ID-FP.
OD-GP Outer Door Grill Plate
BCM Blank Control Module plate
BCM Blank Control Module plate
BCMs can be mounted on a single ID-MP. Four blank
module plates are included in each Model BCM.
OD-LP Outer Door Lens Plate
OD-LP Outer Door Lens Plate
The Model OD-LP is a clear plastic lens plate mounted on
the outer door of a system cabinet. It is used to allow
operators to see the system interface and controls
mounted on the inner door, but restricts access to unauthorized users. It covers an entire row on the outer door. A
single lens plate is included with each OD-LP.
OD-BP Outer Door Blank Plate
OD-BP Outer Door Blank Plate
The Model OD-BP is used to cover an entire row on the
outer door of a system cabinet. It is used when there is
no PMI or control modules mounted on the adjacent row of
the inner door. A single blank plate is included in each ODBP.
OD-GP Outer Door Grill Plate
The Model OD-GP also covers an entire row on the outer
door of a system cabinet, but has four rows of ventilation
louvers on it. The OD-GP is mounted in front of system
bulk amplifiers, card amplifiers, or other modules that
generate heat. Using the OD-GP will permit airflow across
these modules to aid in heat dissipation. A single grill
plate is included with each OG-GP.
Remote System Enclosures
The Models REMBOX2 and REMBOX4 are FireFinder XLS
system enclosures that are used for remotely mounting
inner door modules like the PMI interface, switch modules, Model LVM live voice modules, and Model FMT
firefighters master telephone modules. They are thinner
than the regular CAB enclosures (just 5" deep overall) and
are perfect for mounting in places where space is limited
(like lobbies or behind a receptionist's desk). Due to their
smaller depth, no card cages, power supplies or bulk
amplifiers can be mounted in a REMBOX. However,
the PMI and modules such as the RNI remote network
interface module, the OCM-16 output control module, and
the SIM-16 supervised input module can be mounted in a
REMBOX. Due to the depth of the live voice module and
the firefighters master telephone, no OCM-16s or SIM-16s
can be used simultaneously with the LVM or the FMT.
Both the REMBOX2 and the REMBOX4 are designed for
flush mounting with no trim kit required. Both enclosures
also come with a clear lens plate on the cover.
REMBOX2 Two Module Remote Enclosure
REMBOX2 Two Module Remote Enclosure
The REMBOX2 has two inner door module spaces, and
can hold a single PMI, up to two switch module brackets,
one LVM live voice module. Combinations are also
allowed. The REMBOX2 can also mount a single RNI
remote network interface on a bracket included in the
backbox. A bracket called the REMBOX2-MP can be used
to mount up to four OCM-16 output control modules or
SIM-16 supervised input modules. The REMBOX2-MP
must be purchased separately. Approximate size of the
REMBOX2 is 14-1/2" wide, 18-1/2" high and 5" deep.
NCC-G - Network Color Graphics
REMBOX4 Four Module Remote Enclosure
REMBOX4 Four Module Remote Enclosure
The REMBOX4 has space for mounting four inner door
modules. Any combination of PMIs (two module spaces),
switch module brackets, LVMs or FMTs (one module
space each) can be used. Unused module spaces can be
covered with Model ID-SP blank plates. The REMBOX4 can
also mount a single RNI remote network interface on a
bracket included in the backbox. A bracket called the
REMBOX4-MP can be used to mount up to eight OCM-16
output control modules or SIM-16 supervised input modules. The REMBOX4-MP must be purchased separately.
Approximate size of the REMBOX4 is 24" wide, 18-1/2"
high and 5" deep.
NCC-G - Network Color Graphics
NCC-G is a PC based color graphics command center
designed for use with the XNET network and provides full
control and annunciation for a XNET network of up to 63
XLS, MXL-IQ or MXL systems. The NCC-G is used to
monitor and control alarms, troubles, security, supervisory
and all system events from one of many XLS systems.
The NCC-G maintains an extensive history log of all
system events and has extensive report generation
capabilities. User programmable function buttons allow
site specific control functions. Multiple NCC-Gs may be
connected to XNET network. Each NCC-G ordered separately.
Ordering Information
Model
Number
PMI
Operator Interface/ System CPU
DLC
Device Loop Card
Description
Model
Number
CAB2-BD
Description
Two-row black inner & outer door set
50 0-033090
CAB2-RD
Two-row red inner & outer door set
CAB3
Complete three-row black cabinet with back box,
inner door, outer door, three CAB-MP mounting
plates and one OD-LP lens plate
599-633764
CAB3R
Complete three-row red cabinet
599-633765
CAB3-BB
Three-row black back box
500-633011
CAB3-RB
Three-row red back box
500-634942
CAB3-BD
Three-row black inner & outer door set
50 0-633010
CAB3-RD
Three-row red inner & outer door set
500-633757
CAB1-TK
Single row cabinet black trim kit
50 0-633013
CAB1R-TK
Single row cabinet red trim kit
500-633729
CAB2-TK
Two-row cabinet black trim kit
50 0-633014
CAB2R-TK
Two-row cabinet red trim kit
500-633753
CAB3-TK
Three-row cabinet black trim kit
50 0-633015
CAB3R-TK
Three-row cabinet red trim kit
500-633754
CAB2-X
Complete CAB2 with transponder door
(no inner door)
599-034252
CAB2-XBD
CAB2 transponder door
500-633768
CAB3-X
Complete CAB3 with transponder door
(no inner door)
599-034253
Part Number
50 0-033070
PMI-INT
Operator Interface/ System CPU with
Multilingual Overlays
50 0-034160
ZIC-4A
4 Circuit Zone Indicating Card
50 0-033050
ZIC-8B
8 Circuit Zone Indicating Card
50 0-648670
ZIC-2C
2 CHANNEL ADAPTER CARD FOR ZIC-8B
50 0-648671
HLIM
Line Isolator Module
50 0-033170
HCP
INTELLIGENT CONTROL POINT
50 0-034860
NIC-C
Network Interface Card
50 0-033240
CRC-6
Controllable Relay Card
50 0-033250
SIM-16
Supervised Input Module
50 0-034060
CDC-4
Conventional Detector Card
50 0-03420 0
PSC-12
Power Supply & Battery Charger 12A @ 24VDC
50 0-033340
Part Number
50 0-6330 08
500-633755
PSX-12
Power Supply Extender 12A @ 24VDC
50 0-034120
PTB
PowerTermination Board
50 0-033390
AC-ADPT
Technician Laptop Power Connector
50 0-633992
CC-5
Card Cage-5 Slots
50 0-633037
CC-2
Card Cage-2 Slots
50 0-633440
RNI
Remote Network Interface Module
50 0-033420
RPM
Remote Printer Module
50 0-033270
CAB3-XBD
CAB3 transponder door
500-633769
PAL-1
UL Listed Parallel Printer
50 0-692407
CAB2-XRD
System Status Display
50 0-034740
SSD-C
System Status Display w/control
50 0-034750
LARGE ENCLOSURE TRANSPONDER
DOOR - RED
MOUNTS TO CAB2-RB
500-633792
SSD
SSD-INT
System Status Display with multilingual
overlays
50 0-034740
CAB3-XRD
LARGE ENCLOSURE TRANSPONDER
DOOR - RED
MOUNTS TO CAB3-RB
500-633793
SSD-C-INT
System Status Display with control and
multilingual overlays
50 0-034750
CAB-MP
Back box module mounting plate
50 0-633012
ID-MP
Inner door module mounting plate
(four per package)
500-633027
ID-SP
Inner door single module blank plate
(two per package)
500-633028
ID-FP
Inner door four module blank plate
500-633029
BCM
Blank control module plate (four per package)
500-033320
OD-LP
Outer door lens plate
50 0-633016
OD-BP
Outer door blank plate
50 0-633017
OD-BP-R
Outer door red blank plate
50 0-634919
OD-GP
Outer door grill plate
50 0-633018
OD-GP-R
Outer door red grill plate
500-634920
REMBOX2
Two module black remote box lobby enclosure
500-633772
SSD-C-REM
System Status Display w/control for remote
lobby enclosure
50 0-634773
Multipoint Digital Point Alarm Communication
Transmitter
50 0-699254
DCT-P
Programmer - MDACT
50 0-699291
MOM2-XMP
Mounting Plate for MOM-2 in FireFinder XLS
systems
50 0-634822
MOM-2
MXL Module Cardcage (1 full shot)
50 0-892766
XMI
FireFinder XLS-MXL Interface Card
50 0-034870
SCM-8
Switch Module (8 Switches)
50 0-033040
LCM-8
LED Annunciator Module (8 LED Sets)
50 0-03310 0
FCM-6
Fan Control Module
Switches (On-Off-Auto)
50 0-033140
ID-MP
Inner Door Mounting Plate
(Accepts up to 4 Modules)
50 0-633027
CSB
CAN Sounder Board
50 0-033130
CCL
CAN-CABLE-Long 30 in. 6-Conductor
599-634214
CAB1
Complete single row black cabinet
50 0-6330 07
CAB1R
Complete single row red cabinet
50 0-633728
CAB2
Complete two-row black cabinet with back box,
inner door, outer door, two CAB-MP mounting
plates and one OD-LP lens plate
599-633762
CAB2R
Complete two-row red cabinet
599-633763
CAB2-BB
Two-row black back box
50 0-6330 09
CAB2-RB
Two-row red back box
50 0-634941
MDACT
REMBOX2-MP Mounting plate for OCM-16, SIM-16 in a
REMBOX2
50 0-364211
REMBOX4
50 0-633914
Four module black remote box lobby enclosure
REMBOX4-MP Mounting plate for OCM-16, SIM-16 in a
REMBOX2
50 0-634212
TSP-40A
Thermal Strip Printer
500-634933
TSP-XB
Brackets for Thermal Strip Printer
500-849949
TSP-XC
Cables forThermal Strip Printer
500-849950
CCU/M
Alphanumeric Pager Interface Module
500-895330
D230 0-MP
Mounting Plate for CCU/M and Fiber Module
500-634758
GPMI-UK
Software Upgrade Kit for PMI to Allow
Global Functionality
50 0-650 066
PMI and GPMI-UK
599-050 092
Siemens Building Technologies
Fire Safety
Fire Safety
8 Fernwood Road
Florham Park, NJ 07932
Tel: (973) 593-2600
FAX: (973) 593-6670
Website: www.sbt.siemens.com/fis
12/07
5M
SFS-IG
Printed in U.S.A.
Fire Safety
2 Kenview Boulevard
Brampton, Ontario
Canada L6T 5E4
Tel: (905) 799-9937
FAX: (905) 799-9858
December 2007
New Issue