User’s Guide
For LS720D
7” Dual Digital Photo Frames
with Slideshow
Warning
Use only the power adapter supplied with your product.
Welcome...
to your new Motorola Digital Photo Frame!
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will
need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty
coverage.
For product-related questions, please call:
1-888-331-3383 in US and Canada
0845 218 0890 in UK
(65) 68412668 in Singapore
On the Web: www.motorola.com
This User’s Guide provides you with all the information you need to get the most from your digital photo frame.
Before you start using, you will need to set up your digital photo frame. Follow the simple instructions in
“Getting started”, on the next few pages.
IMPORTANT
Only use the supplied power adapter.
Got everything?
1 x Digital Photo Frame
1 x Stand
1 x Power adapter
1 x Remote control
1 x Quick Start Guide
1 x User’s Guide
Key features
3 view modes: Clock/Calendar mode, dual slideshow mode
and thumbnail mode
5 slideshow transition effects
Date and Time settings
Programmable On/Off Time
Supports flash drive, SD, SDHC and MMC memory cards.
Frame Overview
1. SCREEN 1
2. SCREEN 2
3. Remote control sensor
SCREEN 2 buttons (No. 1 ~ 4)
1. Long press: ON/OFF button
Short press: EXIT button
2. RIGHT/NEXT button
3.
button
4. LEFT/PREVIOUS button
SCREEN 1 buttons (No. 5 ~ 7)
5. ON/OFF button
6. EXIT button
7.
8.
9.
10.
11.
12.
Navigation and
buttons
Stand locking slot
Loudspeakers
Hanging slot (Landscape position)
Hanging slot (Portrait position)
Earphone jack
for connecting to an earphone/headset
or external speaker to play the audio.
13. USB port (for SCREEN 1)
for inserting a USB flash drive that
contains the photos or music you want
to play.
14. Memory card slot (for SCREEN 1)
15. Memory card slot (for SCREEN 2)
for inserting an SD, SDHC, MMC
memory card that contains the photos
or music you want to play.
16. Power jack
Table of Contents
3
Table of Contents
1.
2.
3.
4
Getting started ................................................................................5
1.1
Installing the stand ..........................................................6
1.1.1
Landscape position ..............................................6
1.1.2
Portrait position ....................................................7
1.2
Connecting to power .......................................................9
1.3
Inserting a memory card or a USB flash drive .................9
1.4
Replacing the remote control battery.............................10
Using the photo frame..................................................................11
2.1
Using the control buttons ..............................................11
2.1.1
SCREEN 1 buttons.............................................13
2.1.2
SCREEN 2 buttons.............................................14
2.2
Using the remote control ...............................................15
Using the menus in SCREEN 1....................................................17
3.1
Using the Main Menu ....................................................17
3.2
Using the Photo menu...................................................18
3.2.1
Copying one or all photos ...................................19
3.2.2
Deleting one or all photos ...................................19
3.2.3
Auto rotation.......................................................20
3.3
Using the Music menu...................................................21
3.3.1
Copying one or all music files .............................21
3.3.2
Deleting one or all music files .............................22
3.4
Using the Calendar menu .............................................23
3.5
Using the Settings menu ...............................................24
3.5.1
Settings menu in SCREEN 1 ..............................24
3.5.1.1
Setting an alarm...................................27
3.5.1.2
Enabling auto on/off .............................28
4.
5.
6.
7.
Using the menus in SCREEN 2....................................................29
4.1
Using the Main Menu ....................................................29
4.2
Using the Photo menu...................................................29
4.2.1
Auto rotation.......................................................30
4.3
Using the Settings menu ...............................................31
4.3.1
Settings menu in SCREEN 2 ..............................31
General information .....................................................................33
Technical specifications ..............................................................39
Wall mounting instructions..........................................................41
Table of Contents
1. Getting started
WARNING
Do not place your digital photo frame in the bathroom or
other humid areas.
Do not place your digital photo frame near sources of
heat and extreme temperatures, such as fluorescent
lighting, microwave ovens, heating appliances and direct
sunlight.
Do not disassemble your digital photo frame; there are no
user-serviceable parts inside.
If the LCD screen breaks, do not touch the glass or liquid.
Contact Motorola customer support for assistance.
Use only the power adapter supplied with your digital
photo frame.
Care and maintenance
Wipe the frame and the LCD screen gently with a soft, clean,
dry cloth.
To remove fingerprints on the LCD screen, wipe gently with
a soft, lint-free cloth. Do not use cleaning solutions unless
they are designed specifically for LCD screens.
IMPORTANT
Always switch off and disconnect the power adapter before
cleaning the digital photo frame.
Compatible photo format
Your digital photo frame can only display photos that are in
JPEG format. Other photo formats may not be detected or
displayed correctly.
Getting started
5
1.1
Installing the stand
3.
Insert the stand into the stand locking slot as illustrated,
until the stand is secured to the photo frame.
1.1.1 Landscape position
To place the photo frame in landscape position, follow the
steps below to install the stand.
1.
2.
Hold the photo frame in landscape position.
Attach the stand to the stand locking slot on the back of
the photo frame.
WARNING
Do not rotate the stand during the installation. Otherwise,
the photo frame will be damaged.
6
Getting started
4.
Once the installation is complete, place the photo
frame on a stable surface to avoid any possible
movement.
1.1.2 Portrait position
To place the photo frame in portrait position, follow the steps
below to install the stand.
1.
2.
SCREEN 1
Hold the photo frame in portrait position.
Attach the stand to the stand locking slot on the back of
the photo frame.
SCREEN 2
Remote control
sensor
Getting started
7
3.
Insert the stand into the stand locking slot as illustrated,
until the stand is secured to the photo frame.
4.
Once the installation is complete, place the photo
frame on a stable surface to avoid any possible
movement.
Remote
control
sensor
SCREEN 2
SCREEN 1
WARNING
Do not rotate the stand during the installation. Otherwise,
the photo frame will be damaged.
8
Getting started
1.2
Connecting to power
Follow the steps below to connect the photo frame to a
power outlet to turn on the power.
1.
Plug one end of the AC power adapter to the power
jack on the back of the photo frame.
2.
Plug the other end into a power outlet. The power of
the photo frame will be turned on.
1.3 Inserting a memory card
or a USB flash drive
The photo frame is preloaded with some photos in the
internal memory. On the top of the photo frame, you can
also insert a memory card or a USB flash drive containing
the content you want to show on this unit.
NOTE
3.
Place the photo frame in landscape or portrait position
on a stable surface.
NOTE
Preloaded photos in the internal memory can be
displayed on SCREEN 1 only.
After you insert a photo-loaded memory card or USB
flash drive and connect the photo frame to power, the
photo frame will automatically start to display photos in
slideshow mode.
The USB port is for SCREEN 1 only.
The memory card slot and USB port both support
hot-swap function.
The memory card slot accepts these types of memory
cards: SD, SDHC, MMC.
You can play audio and image files on the photo frame.
The supported audio file format is MP3 (*.mp3). The
supported image file format is JPEG (*.jpg).
Video files are not supported on this photo frame.
Available plug types may vary depending on where you
purchased this photo frame.
Getting started
9
1.4 Replacing the remote
control battery
3.
Insert the new battery into the battery holder. The
battery must be placed with the positive pole facing
upwards in the illustrated position.
4.
Slide the battery holder into the remote control.
The supplied remote control comes installed with a CR2025
lithium battery. When you need to replace the battery, follow
the steps below.
1.
Slide the locking tab to the right.
WARNING
2.
10
Pull out the battery holder.
Protect the battery from overheating or excessive
moisture.
Failure to replace the battery in the correct manner may
result in damage to the battery.
Use only the approved specified batteries.
Properly recycle or dispose of used batteries according to
local guidelines and regulations.
Do not throw batteries into fire. This may result in an
explosion.
If the battery is completely drained or the remote control
is not in use for a long time, remove the battery to prevent
leakage.
Getting started
2. Using the photo frame
2.1 Using the control
buttons
To operate the photo frame, you can:
Use the control buttons on the back of the photo frame
Or
Use the supplied remote control
NOTE
There are two sets of control buttons on the back,
“SCREEN 1 buttons” and “SCREEN 2 buttons”. You can
use “SCREEN 1 buttons” to operate SCREEN 1, and use
“SCREEN 2 buttons” to operate SCREEN 2.
To operate and set up full functions of the photo frame,
use the “SCREEN 1 buttons”.
To operate Photo and Settings menus in SCREEN 2, use
“SCREEN 2 buttons”.
No.
Description
Control buttons for SCREEN 2
1
ON/OFF and EXIT button
Long press to turn on the screen backlight for
SCREEN 2.
Long press to turn off the screen backlight for
SCREEN 2 to enter Standby mode.
Short press to go back to the previous page or
return to the Main Menu.
2
RIGHT/NEXT button
Moves right.
Moves to the next item.
(Continued on next page)
Using the photo frame
11
No.
Description
No.
Description
Control buttons for SCREEN 2
Control buttons for SCREEN 1
3
7
4
button
Enters/confirms the selection.
Starts/pauses the slideshow.
Navigation and
buttons
LEFT/PREVIOUS button
Moves left.
Moves to the previous item.
Control buttons for SCREEN 1
5
ON/OFF button
Turns on the screen backlight for SCREEN 1.
Turns off the screen backlight for SCREEN 1 to
enter Standby mode.
6
EXIT button
Returns to the Main Menu.
Goes back to the previous page.
Stops the playback.
12
a. UP/VOL : moves up/increases the volume.
b. DOWN/VOL!: moves down/decreases the
volume.
c. RIGHT: moves right.
d. LEFT: moves left.
e.
: enters/confirms the selection, or
starts/pauses the playback.
Using the photo frame
2.1.1 SCREEN 1 buttons
When using the Main Menu
Button
UP/VOL
DOWN/VOL!
LEFT
RIGHT
Function
Selects Internal Memory, USB or
Memory Card.
Selects Internal Memory, USB or
Memory Card.
Selects Photo, Music, Calendar or
Settings menu.
Selects Photo, Music, Calendar or
Settings menu.
Enters sub-pages of Photo, Music,
Calendar or Settings menu.
When browsing photos in thumbnail view
Button
UP/VOL
DOWN/VOL!
LEFT
RIGHT
EXIT
Function
Moves up.
Moves down.
Moves left.
Moves right.
Displays the currently selected photo
in Single Photo view.
Goes back to the previous page.
Using the photo frame
When playing a slideshow
Button
LEFT
RIGHT
Function
Displays the previous photo.
Displays the next photo.
Starts/pauses the playback.
EXIT
Goes back to the previous page.
When using the Music menu
Before playing music / When music is paused
Button
Function
UP/VOL
Selects the previous track.
DOWN/VOL!
Selects the next track.
LEFT
Selects the previous track.
RIGHT
Selects the next track.
When playing music
Button
Function
UP/VOL
Increases the volume.
DOWN/VOL!
Decreases the volume.
LEFT
Selects the previous track.
RIGHT
Selects the next track.
13
When using the Calendar menu
Button
LEFT
RIGHT
EXIT
Function
Selects Photo, Music, Calendar or
Settings menu.
Selects Photo, Music, Calendar or
Settings menu.
Enters Calendar full screen mode
when the Calendar menu is selected.
Goes back to the previous page.
2.1.2 SCREEN 2 buttons
When playing a slideshow
Button
ON/OFF and
EXIT
When using the Settings menu
Button
UP/VOL
DOWN/VOL!
LEFT
RIGHT
EXIT
14
Function
Moves up to the previous sub-menu in
Settings.
Moves down to the next sub-menu in
Settings.
Selects Photo, Music, Calendar or
Settings menu.
Selects Photo, Music, Calendar or
Settings menu.
Enters sub-menus in Settings.
Enters/confirms the selection.
Quits sub-menus in Settings.
Goes back to the previous page.
RIGHT/NEXT
LEFT/
PREVIOUS
Function
Long press to turn on the screen
backlight for SCREEN 2.
Long press to turn off the screen
backlight for SCREEN 2 to enter
Standby mode.
Short press to go back to the
previous page or return to the Main
Menu.
Displays the next photo.
Starts/pauses the playback.
Displays the previous photo.
Using the photo frame
2.2
Using the remote control
The following table describes the buttons and their functions
that are available on the supplied remote control.
SCREEN 1 buttons
No.
Description
1
ON/OFF
Turns on the screen backlight for SCREEN 1
Turns off the screen backlight for SCREEN 1 to
enter Standby mode.
MENU
You can press this button to activate or deactivate
Copy One, Copy All, Delete One or Delete All
options in Thumbnail mode and Music Player.
UP/VOL
Moves up or increases the volume.
LEFT/PREVIOUS
Moves left or selects the previous item.
ROTATE
You can press this button repeatedly to rotate the
selected photo counterclockwise each time by 90
degrees.
DOWN/VOL!
Moves down or decreases the volume.
2
3
4
5
6
(Continued on next page)
Using the photo frame
15
SCREEN 1 buttons
SCREEN 2 buttons
No.
Description
No.
Description
7
SETUP
You can press this button to access the Settings
menu.
EXIT
Goes back to the previous page.
RIGHT/NEXT
Moves right or selects the next item.
12
LEFT/PREVIOUS
Displays the previous photo.
ON/OFF
Turns on the screen backlight for SCREEN 2
Turns off the screen backlight for SCREEN 2 to
enter Standby mode.
RIGHT/NEXT
Displays the next photo.
8
9
10
11
16
(OK/PLAY/PAUSE)
Enters and confirms the selection, or starts/pauses
the playback.
ZOOM
Zooms in the photo by a factor of 2x, 4x, 8x and 16x.
13
14
15
16
(OK/PLAY/PAUSE)
Enters and confirms the selection, or starts/pauses
the playback.
EXIT
Goes back to the previous page.
Using the photo frame
3. Using the menus in
SCREEN 1
3.1
Using the Main Menu
After turning on the power of the photo frame, photos will
play in slideshow mode automatically.
If a memory card has been inserted, photos in the card
will play in slideshow mode automatically.
To exit slideshow mode and return to the Main Menu,
press the EXIT button on the back of the photo frame.
NOTE
To check the available space in Internal Memory, USB or
Memory Card, select Internal Memory, USB or Memory
Card and check the amount of free space shown on the
bottom right corner.
In the Main Menu, you can:
Press the LEFT or RIGHT button to select the
Photo, Music, Calendar or Settings menu.
Press the UP/VOL
or DOWN/VOL! button to
select a device, including Internal Memory, USB or
Memory Card.
If no memory card is inserted, photos in the built-in
memory will play in slideshow mode automatically.
To operate and set up full functions of the photo frame,
use the “SCREEN 1 buttons”. You can use these buttons
to control all the menus in SCREEN 1.
Photos in the internal memory can be displayed on
SCREEN 1 only. There is no sharing of content between
SCREEN 1 and SCREEN 2.
Using the menus in SCREEN 1
17
3.2
Using the Photo menu
NOTE
The photo frame only supports JPEG (*.jpg) image file
format.
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Photo menu.
2.
Press the UP/VOL
select a device.
3.
Press the
button to enter Photo Viewer, which
displays your photos in thumbnail view. In Photo
Viewer, both photos and folders may display,
depending on the content stored in your device.
or DOWN/VOL! button to
To browse or select a photo, use the UP/VOL
DOWN/VOL!, LEFT and RIGHT buttons.
,
To play photos in full screen single photo mode,
press the
button. Press the
button again
to start running slideshow.
To make photos play with background music in
slideshow mode, go to the Settings menu to set
Music slideshow to On. (This function is only
available on SCREEN 1 and this function is only
available when you have music files in the internal
memory or inserted memory card/USB flash drive.)
To switch to the previous or next photo in slideshow
mode, press the LEFT or RIGHT button.
To control the slideshow music volume, press the
UP/VOL
or DOWN/VOL! button.
To rotate a photo, press the ROTATE button on your
remote control.
To zoom in a photo, press the ZOOM button on your
remote control.
18
Using the menus in SCREEN 1
3.2.1 Copying one or all photos
3.
NOTE
then press the
To copy photos from your memory card or USB to the
internal memory, please insert your memory card or USB
flash drive first.
Use the supplied remote control for this operation.
1.
Press the LEFT or RIGHT button to select Yes, and
In Photo Viewer, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
4.
button.
Press the LEFT or RIGHT button to select the
destination (USB, Memory Card or Internal Memory),
and then press the
button to confirm.
Once the copy process starts, do not remove your USB or
memory card from the photo frame before the “Complete”
message appears.
3.2.2 Deleting one or all photos
NOTE
Use the supplied remote control for this operation.
2.
1.
In Photo Viewer, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
2.
Press the LEFT or RIGHT button to select Delete One
or Delete All, and then press the
Press the LEFT or RIGHT button to select Copy One
or Copy All, and then press the
button.
3.
Press the LEFT or RIGHT button to select Yes, and
then press the
Using the menus in SCREEN 1
button.
button to confirm.
19
3.2.3 Auto rotation
The photo frame has a built-in tilt sensor that allows the
photo frame to determine its own orientation relative to
gravity and thereby automatically switch from displaying
photos in landscape position to displaying photos in portrait
position.
20
Using the menus in SCREEN 1
3.3
NOTE
The photo frame only supports MP3 (*.mp3) audio file
format.
1.
2.
3.
During music playing, volume bar shows on top right
corner. To increase or decrease the volume, press
the UP/VOL
or DOWN/VOL! button.
Using the Music menu
In the Main Menu, press the LEFT or RIGHT button to
select the Music menu.
Press the UP/VOL
or DOWN/VOL! button to
select a device.
Press the
3.3.1 Copying one or all music
files
NOTE
To copy music files from your memory card or USB to the
internal memory, please insert your memory card or USB
flash drive first.
Use the supplied remote control for this operation.
button to enter Music Player.
1.
In Music Player, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
To select the previous track, press the UP/VOL
or LEFT button.
To select the next track, press the DOWN/VOL! or
RIGHT button.
To play the selected track, press the
Using the menus in SCREEN 1
button.
21
2.
Press the LEFT or RIGHT button to select Copy One
or Copy All, and then press the
3.
button.
Press the LEFT or RIGHT button to select Yes, and
3.3.2 Deleting one or all music
files
NOTE
Use the supplied remote control for this operation.
then press the
4.
button.
1.
In Music Player, press the MENU button on the
remote control. Copy One, Copy All, Delete One and
Delete All options will appear on the screen.
2.
Press the LEFT or RIGHT button to select Delete One
Press the LEFT or RIGHT button to select the
destination (USB, Memory Card or Internal Memory),
and then press the
button to confirm.
Once the copy process starts, do not remove your USB or
memory card from the photo frame before the “Complete”
message appears.
or Delete All, and then press the
3.
Press the LEFT or RIGHT button to select Yes, and
then press the
22
button.
button to confirm.
Using the menus in SCREEN 1
3.4
1.
2.
Using the Calendar menu
In the Main Menu, press the LEFT or RIGHT button to
select the Calendar menu.
Press the
button to enter the Calendar preview
screen, and then press the
button again to enter
full screen mode in the Calendar menu. The slideshow
automatically starts.
Using the menus in SCREEN 1
3.
In full screen calendar mode, you can press the
button to display one specific still photo or enter
slideshow mode. To switch to next or previous photo,
press the RIGHT or LEFT button.
NOTE
If you have set the alarm, an alarm icon will show on the
Calendar screen. For details about alarm settings, refer to
“3.5.1.1 Setting an alarm”.
23
3.5
Using the Settings menu
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Settings menu.
2.
Press the
3.5.1 Settings menu in SCREEN 1
You can control all function settings of the photo frame from
the Settings menu in SCREEN 1.
button to enter the Settings menu.
To move among sub-menus under Settings, press
the UP/VOL
or DOWN/VOL! button.
To apply the settings you have selected, press the
button.
To go back to the previous page, press the EXIT
button.
Refer to the table below for more information.
Sub-menu
Option
Description/Function
Slideshow
frequency
5 seconds
10 seconds
30 seconds
1 minute
1 hour
1 day
Selects the speed of
slideshow.
(Continued on next page)
24
Using the menus in SCREEN 1
Sub-menu
Option
Description/Function
Transition
effect
No effect
Random
Fade out
Fade in
Left to Right
Horizontal
open
Horizontal
close
Year
Month
Day
Hour
Minute
Time
Format
Selects the transition effect
to be applied in slideshow.
Date & Time
setting
Using the menus in SCREEN 1
Alarm setting
Alarm
on/off
Alarm hour
Alarm
minute
Volume
Tone
Day
Allows you to set up the
date and time.
Activates/deactivates the
alarm clock function.
Sets the alarm hour.
Sets the alarm minute.
Sets the alarm volume
level.
Selects the type of alarm
tones: Beep or MP3
Allows you to set the alarm
recurring everyday or on
weekdays.
(Continued on next page)
25
Sub-menu
Option
Description/Function
Languages
English
Français
Deutsch
Italiano
Español
Português
Nederlands
P !!"#$
Svenska
Dansk
Suomi
Norsk
Polski
Magyar
%&'()
Türkçe
*++,-./0
Selects an OSD
(On-screen display)
language.
On/Off
schedule
Display
Photo view
options
Music
slideshow
Auto On/Off
Auto on
hour
Auto on
minute
Auto off
hour
Auto off
minute
Brightness
Contrast
Original
Fit to
screen
On
Off
Enables/disables the Auto
power on/power off options.
Powers on the photo frame
automatically according to
the time length you set.
Powers off the photo frame
automatically according to
the time length you set.
Sets the level of brightness.
Sets the level of contrast.
Displays photos in their
original aspect ratio.
Optimizes photos to fit the
whole screen.
Turns on background music
in slideshow mode.
Turns off background music
in slideshow mode.
(Continued on next page)
26
Using the menus in SCREEN 1
Sub-menu
Option
Description/Function
Copy option
Original
size
Use the original file size
when copying photos or
music.
Use the reduced file size
when copying photos or
music.
Cancels the task.
Resets to system default
settings.
Cancels the task.
Formats the internal
memory.
WARNING:
This option will delete all
the photo and music files
stored on the internal
memory.
Reduce
size
Default
settings
EXIT
OK
Clear internal
memory
EXIT
OK
3.5.1.1 Setting an alarm
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Settings menu.
2.
Press the
3.
Press the DOWN/VOL! button to select Alarm
setting, and then press the
button.
4.
Press the LEFT or RIGHT button to set the alarm to
On.
5.
Continue to adjust the alarm hour, minute, volume,
tone and Day.
In the Day option, you can select Everyday or
Weekday. When Everyday is selected, alarm repeats
everyday, including Saturday and Sunday. When
Weekday is selected, alarm repeats from Monday to
Friday.
6.
Press the EXIT button when finished.
NOTE
When the alarm goes on, you can press the EXIT button
to stop the alarm or press the
button to activate the
snooze function.
If you choose MP3 in the Tone option, music stored in the
built-in memory will be used as the alarm tone.
If no music file is available in the memory, Beep tone will
be used as the alarm tone.
button to enter the Settings menu.
Using the menus in SCREEN 1
27
3.5.1.2 Enabling auto on/off
The photo frame comes with the Programmable On/Off
Time feature, making it possible to automatically power on
and off SCREEN 1 and SCREEN 2 in sync according to the
time you set.
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Settings menu.
2.
Press the
3.
Press the DOWN/VOL! button to select On/Off
button to enter the Settings menu.
schedule, and then press the
button.
4.
Press the LEFT or RIGHT button to select On for the
Auto On/Off option.
5.
Continue to set the Auto On/Off time.
To move among entries, press the UP/VOL
or
DOWN/VOL! button.
To adjust the time, press the LEFT or RIGHT button.
6.
Press the EXIT button when finished.
NOTE
When the photo frame has been powered off automatically,
you can press any control buttons or any buttons on the
remote control to resume the system at any time. Once it
reaches the scheduled Off time, the photo frame will power
off automatically still.
28
Using the menus in SCREEN 1
4. Using the menus in
SCREEN 2
4.1
Using the Main Menu
If a memory card has been inserted, photos in the card
will play in slideshow mode automatically.
If no memory card is inserted, the screen shows the Main
Menu.
4.2
Using the Photo menu
To display photos in SCREEN 2, you need to insert a
photo-loaded SD card to the “Memory card slot (for
SCREEN 2)” first. Then, slideshow starts automatically.
1.
2.
3.
Press the EXIT button to return to the Main Menu.
In the Main Menu, press the LEFT or RIGHT button to
select the Photo menu.
Press the
button to enter Photo Viewer, which
displays your photos in thumbnail view. In Photo
Viewer, both photos and folders may display,
depending on the content stored in your device.
You can use "SCREEN 2 buttons" to access the Photo and
Settings menus in SCREEN 2.
Using the menus in SCREEN 2
29
To browse or select a photo, use the UP/VOL
DOWN/VOL!, LEFT and RIGHT buttons.
,
To play photos in slideshow mode, press the
button.
To switch to the previous or next photo in slideshow
mode, press the LEFT or RIGHT button.
4.2.1 Auto rotation
The photo frame has a built-in tilt sensor that allows the
photo frame to determine its own orientation relative to
gravity and thereby automatically switch from displaying
photos in landscape position to displaying photos in portrait
position.
NOTE
The following functions are not available on SCREEN 2:
Music slideshow, Copy/Delete File, Zoom and Manual
Rotation.
30
Using the menus in SCREEN 2
4.3
Using the Settings menu
1.
In the Main Menu, press the LEFT or RIGHT button to
select the Settings menu.
2.
Press the
4.3.1 Settings menu in SCREEN 2
Refer to the table below for more information about the
Settings menu in SCREEN 2.
button to enter the Settings menu.
To move among sub-menus under Settings, press
the LEFT or RIGHT button.
To apply the settings you have selected, press the
button.
To go back to the previous page, press the EXIT
button.
Sub-menu
Option
Description/Function
Slideshow
frequency
5 seconds
10 seconds
30 seconds
1 minute
1 hour
1 day
Selects the speed of
slideshow.
(Continued on next page)
Using the menus in SCREEN 2
31
Sub-menu
Option
Description/Function
Transition
effect
No effect
Random
Fade out
Fade in
Left to Right
Horizontal
open
Horizontal
close
English
French
Spanish
Brightness
Contrast
Original
Selects the transition effect
to be applied in slideshow.
Languages
Display
Photo view
options
Default
settings
32
Fit to
screen
EXIT
OK
Selects an OSD
(On-screen display)
language.
Sets the level of brightness.
Sets the level of contrast.
Displays photos in their
original aspect ratio.
Optimizes photos to fit the
whole screen.
Cancels the task.
Resets to system default
settings.
Using the menus in SCREEN 2
5. General information
Consumer Products and Accessories
purchased in the United States, Canada, UK
and Singapore.
If your product is not working properly...
1.
Read this User’s Guide or the Quick Start Guide.
2.
Visit our website:
www.motorola.com
3.
Contact Customer Service:
•
1-888-331-3383 in US and Canada
•
0845 218 0890 in UK
•
(65) 68412668 in Singapore
What Does this Warranty Cover?
Subject to the exclusions and limitations contained below,
Binatone Electronics International LTD. warrants the
Motorola branded consumer products that it manufactures
(“Products”) and the Motorola branded or certified
accessories sold for use with these Products that it
manufactures (“Accessories”) to be free from defects in
materials and workmanship under normal consumer usage
for the period(s) outlined below. This limited warranty is a
consumer’s exclusive remedy, and only applies as follows to
new Motorola branded Products and Accessories
manufactured by Binatone Electronics International LTD.,
and purchased by consumers in the United States, Canada,
UK or Singapore, which are accompanied by this written
warranty:
Who is covered?
This warranty covers only the first consumer purchaser, and
is not transferable.
General information
33
What will BINATONE ELECTRONICS INTERNATIONAL
LTD. do?
BINATONE ELECTRONICS INTERNATIONAL LTD., at its
sole option, will at no charge repair, replace or refund the
purchase price of any Products or Accessories that does not
conform to this warranty. Binatone Electronics International
LTD. may use functionally equivalent reconditioned/
refurbished/ pre-owned or new Products, Accessories or
parts in such repair or replacement and any Products,
Accessories or parts removed or being replaced under this
warranty become the property of Binatone Electronics
International LTD.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES OR CONDITIONS
IRRESPECTIVE OF WHETHER THEY ARE IMPOSED BY
LAW OR OTHERWISE, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER
THIS EXPRESS LIMITED WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER, AND IS
PROVIDED IN LIEU OF ALL WARRANTIES AND
MOTOROLA AND BINATONE ELECTRONICS
INTERNATIONAL LTD. MAKES NO OTHER WARRANTIES
OR CONDITIONS, EXPRESS OF IMPLIED. IN NO EVENT
SHALL MOTOROLA OR BINATONE ELECTRONICS
34
INTERNATIONAL LTD. BE LIABLE, WHETHER UNDER
THIS LIMITED WARRANTY OR IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE OR STRICT PRODUCT
LIABILITY) OR OTHERWISE FOR DAMAGES OR CLAIMS
IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
OF ANY KIND, OR LOSS OF REVENUE, SAVINGS OR
PROFITS, LOSS OF BUSINESS, LOSS OF PROGRAMS
DATA INFORMATION (WHETHER CONFIDENTIAL
PROPRIETARY OR PERSONAL IN NATURE OR
OTHERWISE) OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE ABILITY OR
INABILITY TO USE THE PRODUCTS OR ACCESSORIES
AND BINATONE ELECTRONICS INTERNATIONAL LTD.
SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR
ANY CLAIMS OR DEMANDS MADE BY ANY THIRD
PARTY OR MADE BY YOU ON BEHALF OF ANY THIRD
PARTY TO THE FULL EXTENT THESE DAMAGES OR
CLAIMS MAY BE DISCLAIMED BY LAW.
Some states, countries or jurisdictions do not allow the
limitation or exclusion of incidental or consequential
damages, or limitation on the length of an implied warranty,
so the above limitations or exclusions may not apply to you
in such states, countries or jurisdictions. This warranty gives
you specific legal rights, and you may also have other rights
that vary from state to state or from one country/jurisdiction
to another.
General information
Products or Accessories
Covered
Consumer Products
Consumer Accessories
Consumer Products and
Accessories that are
Repaired or Replaced
Length of Coverage
One (1) year from the date
of purchase by the first
consumer purchaser of the
product.
Ninety (90) days from the
date of purchase by the first
consumer purchaser of the
accessory.
The balance of the
original warranty or for
ninety (90) days from the
date returned to the
consumer, whichever is
longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are
excluded from coverage.
General information
Abuse & Misuse. Defects or damage that result from: (a)
improper or unreasonable use, operation, storage, misuse
or abuse, accident or neglect or other external cause, such
as physical damage (cracks, scratches, etc.) to the surface
of the product resulting from misuse; (b) your failure to
follow or operation outside the usage parameters stated in
the user instructions that came with the Products or
Accessories; (c) contact with liquid, water, rain, extreme
humidity or heavy perspiration, sand, dirt or the like,
extreme heat, or food; (d) use of the Products or
Accessories for commercial purposes or subjecting the
Product or Accessory to abnormal usage or conditions; or (e)
other acts or omissions which are not the fault or neglect of
Motorola or Binatone Electronics International LTD., are
excluded from coverage.
Use of Non-Motorola branded Products and
Accessories. Defects or damage that result from the use of
Non-Motorola branded or certified Products or Accessories
or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in any
way by someone other than Motorola, Binatone Electronics
International LTD. or its authorized service centers, are
excluded from coverage.
35
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or parts,
are excluded from coverage.
Communication Services. Defects, damages, or the
failure of Products or Accessories due to any
communication service or signal you may subscribe to or
use with the Products or Accessories is excluded from
coverage.
These terms and conditions constitute the complete
warranty agreement between you and BINATONE
ELECTRONICS INTERNATIONAL LTD. regarding the
Products or Accessories purchased by you, and supersede
any prior agreement or representations, including
representations made in any literature publications or
promotional materials issued by BINATONE
ELECTRONICS INTERNATIONAL LTD. or representations
made by any agent employee or staff of BINATONE
ELECTRONICS INTERNATIONAL LTD., that may have
been made in connection with the said purchase.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
• 1-888-331-3383 in US and Canada
• 0845 218 0890 in UK
• (65) 68412668 in Singapore
You will receive instructions on how to ship the Products or
Accessories, the shipment of which shall be at your own risk
and expense, to a BINATONE ELECTRONICS
INTERNATIONAL LTD. Authorized Repair Center. To obtain
service, you must include: (a) a copy of your receipt, bill of
sale or other comparable proof of purchase of the Products
or Accessories showing the date of purchase; (b) a written
description of the problem; and, most importantly; (c) your
address and telephone number.
36
General information
Compliance Information
Declaration of Conformity
This product is in compliance with the essential
requirements and other relevant provisions of Directive
2004/108/EC:
European Standard EN55022:2006 Class B,
EN61000-3-2:2006,
EN61000-3-3:1995/A1:2001/A2:2005 and
EN55024:1998/A1:2001/A2:2003
(IEC 61000-4-2:Edition 1.2:2001-04,
IEC 61000-4-3:Edition 2.1:2002-09,
IEC 61000-4-4:Second edition:2004-07,
IEC 61000-4-5:Edition 1.1:2001-04,
IEC 61000-4-6:Edition 2.1:2004-11,
IEC 61000-4-8:Edition 1.1:2001-03,
IEC 61000-4-11:Second Edition:2004-03)
and Australian Standard AS/NZS CISPR 22:2006 Class
B.
General information
FCC Statement
This device complies with Part 15 Subpart B of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
Subpart B of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
37
WARNING
You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
FCC and Industry Canada
This device complies with Industry Canada and FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Canadian DOC statement
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
WEEE Directive
Produced after 13 August 2005. Waste electrical
should not be disposed of with household waste.
Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
38
General information
6. Technical specifications
Screen size
7” diagonal x 2 screens
Aspect ratio
16:9
Panel resolution
800 (H) x 480 (V) pixels
Internal memory size
512MB
Brightness
200 cd/m
Contrast ratio
300:1
Viewing angle in landscape
and portrait positions
(Top/Bottom/Left/Right)
50° / 65° / 65° / 65°
Response time
18 ms
Supported memory card
types
SD, SDHC, MMC
USB Host
Supported
Loudspeakers
0.5W x 2
Power adapter
Built-in tilt sensor
NOTE
Specifications are subject to change without prior notice.
2
AC input: 100-240V;
50/60 Hz; 0.6A
DC output: 9.0V, 2A
Supported image file format
JPEG (*.jpg)
Supported audio file format
MP3 (*.mp3)
Technical specifications
Auto rotation
39
40
Technical specifications
7. Wall mounting instructions
2.
Insert 8mm and 9.5mm head screws (to be purchased
separately) into the holes and tighten the screws. Then, align
your photo frame with the screws.
3.
Mount your photo frame in portrait position on the wall.
Portrait wall mounting
1.
Cut the illustration below and drill holes in the wall exactly as
illustrated.
Wall mounting instructions
41
42
Wall mounting instructions
Landscape wall mounting
1.
Drill a hole in the wall and insert an 8mm head screw (to be
purchased separately) into the hole.
2.
Align your photo frame with the screw.
Wall mounting instructions
3.
Mount your photo frame in landscape position on the wall.
43
44
Wall mounting instructions
Manufactured, distributed or sold by Binatone Electronics
International LTD., official licensee for this product.
MOTOROLA and the Stylized M Logo, and other Motorola
trademarks and trade dress are owned by Motorola, Inc. and
are used under license from Motorola, Inc. MOTOROLA and
the Stylized M Logo are registered in the US Patent &
Trademark Office. All other product or service names are the
property of their respective owners.
© Motorola, Inc. 2009. All rights reserved.
Version 1.0
Printed in China