Emerson CKD1100BL Owner`s manual

Stereo Radio, CD-R/RW Player
with Dual Alarm Clock
OWNER’S MANUAL
CKD1100
(Silver Color)
CKD1100BL
(Blue Color)
CKD1100GN
(Green Color)
CKD1100PK
(Pink Color)
Visit our web site at www.emersonradio.com
CKD1100_052107.p65
30
21/5/2007, 10:44
CAUT I ON
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
C AU T I O N
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(ser vi ci ng) instr ucti ons in
the liter ature accompanying the appl iance.
The Caution Marking maybe located at the bottom enclosure of the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
8.) Only use attachments / accessories specified by the manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids
such as vases shall be placed on the apparatus.
12.) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13.) Do not overload wall outlet. Use only power source as indicated.
14.) Use replacement parts as specified by the manufacturer.
15.) The product may be mounted to a wall only if recommended by the manufacturer.
16.) Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks.
1
CKD1100_052107.p65
1
21/5/2007, 10:44
Before We Begin
Thank you for purchasing this Emerson audio product. The Emerson brand
is your assurance of quality, performance and value.
Our engineers have included many useful and convenient features in this
product. Please be sure to read this Owner's Manual completely to make
sure you are getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and
standards of workmanship. It was tested by Emerson inspectors and found
to be in perfect working order before it left our factory. However, there is
always the chance that some problem may occur because of rough handling
during shipment to the retail store or to the final consumer.
If, after reading this Manual, you experience any problems with the operation
of this product, please refer to the instructions for obtaining service at the
end of this Manual. Emerson and Emerson retailers are committed to your
satisfaction.
Once again, thanks for purchasing this Emerson audio product.
2
CKD1100_052107.p65
2
21/5/2007, 10:44
IMPORTANT NOTES
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
• Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much
heat, places lacking ventilation or dusty
areas, places subject to constant
vibration and/or humid or moist areas.
• Operate controls and switches as
described in the manual.
• Before turning on the power, make
certain that the AC power cord is
properly installed.
• When moving the set, be sure to first
disconnect the AC power cord and
remove cords connected to other
equipment.
FCC Information
This equipment has been tested and found to comply with the limits for a class B
digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
3
CKD1100_052107.p65
3
21/5/2007, 10:44
PREPARATION FOR USE
Unpacking And Set Up
• Remove the unit from the carton, and remove all packing materials
from the unit.
• Save the carton and packing materials in case the unit ever needs to
be returned for service. Using the original carton and packing materials
is the only way to safely repack the unit for shipment.
• Remove any descriptive labels or stickers from the top or front of the
unit. Do not remove any labels from the back or bottom of the cabinet.
• Remove any small strips of tape that may have been used to prevent
the CD door from opening in transit.
• Press the CD door in the area marked OPEN/CLOSE button to open
the CD door and remove the ‘dummy CD’protection card from the CD
player and discard it. Close the CD door.
• Unwind the FM wire antenna on the back cabinet and extend it to its full
length.
• Unwind the AC power cord and extend it to its full length.
• Place the unit on a stable, level surface such as a table, desk, shelf, etc
within easy reach of an AC outlet, out of direct sunlight, and away from
sources of excessive heat, dust, moisture or humidity.
4
CKD1100_052107.p65
4
21/5/2007, 10:44
Power Source
This system is designed to operate on 120V AC 60Hz house current only.
Connecting this system to any other power source may cause damage to the
system and such damage is not covered by your warranty.
NOTE: The system has polarized AC plug with one wide blade and one narrow
blade. The plug will only fit into matching polarized AC outlets.
This is a safety feature to reduce the possibility of electric shock. If the plug will not
fit in your AC outlet, you probably have an outdated non-polarized outlet. You should
have your outdated outlet changed by a qualified, licensed electrician. Do not file
the wide blade on the plug, or use an adapter to make the plug fit into your outlet.
This defeats the safety feature and could expose you to electric shock.
AC Outlet
AC Plug
Protect Your Furniture
This model is equipped with non-skid rubber ‘feet’ to prevent the product from
moving when you operate the controls. These ‘feet’are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber ‘feet’before you place the product on fine wooden furniture.
5
CKD1100_052107.p65
5
21/5/2007, 10:44
Battery Back Up System
This unit uses a single 9-Volt battery (not included) to maintain the time and alarm
settings in the event that it is accidentally unplugged, or you experience a temporary
power failure. We recommend that you install a well-known brand of Alkaline battery
for longest life and best performance. To keep the battery back up system operational
you should install a new battery every 6 to 9 months.
To install the back up battery, turn the unit upside down.
1.) Press on the small tab to remove the battery
door.
2.) Connect the battery to the battery
terminal.
3.) P us h t h e b a tt e r y bac k i n to th e
compartment and replace the battery
door.
If the power is interrupted the clock display will go off but the battery will maintain
the clock and alarm time settings. When power is restored the time display will be
correct and your alarm setting will also be maintained.
If you notice that the time display is completely wrong you probably experienced a
power failure with a weak or exhausted battery in the compartment. Reset the
clock and replace the battery as soon as possible.
6
CKD1100_052107.p65
6
21/5/2007, 10:44
LOCATION OF CONTROLS AND INDICATORS
Front Panel
6
8
7
9
5
4
10
3
11
2
12
1
15 14
13
Top Panel
25
24
23
23
26
22
21
27
20
28
19
18
29
17
30
16
31
7
CKD1100_052107.p65
7
21/5/2007, 10:44
1.) AM/PROG. (AM Radio ‘On’ or CD Program Track) Indicator.
2.) AL2 (Alarm 2) ‘On’ Indicator.
3.) VOLUME Control.
4.) AL1 (Alarm 1) ‘On’ Indicator.
5.) PM Indicator.
6.)
7.)
TIME-DN/F.REV Button.
STOP Button.
8.)
CD PLAY/PAUSE Button.
9.)
TIME-UP/F.FWD
D Button.
10.) SLEEP Indicator.
11.) TUNING Control.
12.) FM Radio ‘On’ Indicator.
13.) LED Display.
14.) AUX Jack.
15.) PHONES Jack.
16.) ALARM 1 Button.
17.) RADIO/BAND Button.
18.) CLK.ADJ/PROG. Button.
19.) DIMMER (HIGH/LOW) Selector Switch.
20.) ALARM OFF/POWER Button.
21.) POWER ‘On’ LED Indicator.
22.) Back Up Battery Compartment (At bottom cabinet)
23.) Speakers.
24.) AC Power Cord.
25.) FM W ire Antenna.
26.) CD compartment.
27.) CD Door OPEN/CLOSE Position.
28.) SNOOZE Button.
29.) SLEEP Button.
30.) ALARM SET/DISPLAY Button.
31.) ALARM 2 Button.
8
CKD1100_052107.p65
8
21/5/2007, 10:44
OPERATING INSTRUCTIONS
Setting The Correct Time And Day
NOTE: Connect the power cord to your AC outlet. Make sure to use an outlet
that is always ‘live’. Do not use an outlet that is controlled by a wall switch.
1.) When the unit is plugged in for the first
tim e, the clock display will begin
flashing “12:00” (AM).
2.) Depress and hold the CLK.ADJ/PROG.
button for at least two seconds until only
the Hour digits continue to flash.
3.) While the Hour digits are flashing press
the
or
buttons repeatly to set
the clock to the correct Hour. Be sure to
observe the PM indicator to set the hour
correctly.
If the PM indicator is ‘On’the hour displayed is PM.
4.) When the correct hour is flashing, press
the CLK.ADJ/PROG. button again. The
Minute digits begin flashing.
5.) While the Minute digits are flashing
press the
or
buttons repeatly to
set the clock to the correct Minutes.
6.) Press the CLK.ADJ/PROG. button. The
Day indicator “d:1” begins to flash.
7.) While the day indicator is flashing, press
the
or
buttons repeatly to set
the display to the correct ‘Day’.
(1 = Monday, 2 = Tuesday, etc.)
9
CKD1100_052107.p65
9
21/5/2007, 10:44
8.) When the correct ‘day’(digit) appears on the display press the CLK.ADJ/PROG.
button once more to exit the clock-setting mode.
The display stops flashing and returns
to the correct time and the clock begins
to run.
IMPORTANT: After you press the CLK.ADJ/PROG. button you must make
your time adjustments within 10 seconds while the display is flashing. After 10
seconds the display stops flashing and no time adjustments can be made.
If this occurs you must begin with Step 2 above and start the time adjustment
process again.
NOTE: After the Clock is set, pressing the ALARM SET/DISPLAY Button
repeatedly will display the Alarm 1, Alarm 2, Week Day, Correct Time in
sequence.
10
CKD1100_052107.p65
10
21/5/2007, 10:44
Listening To The Radio
1.) Press the ALARM OFF/POWER button on the top panel to turn the unit ‘On’.
The POWER LED indicator comes on.
2.) Press the RADIO/BAND button to select the Radio function. Either the
AM/PROG or the FM indicator will come on to confirm which band is selected.
Press the RADIO/BAND button again to repeatedly switch between the AM
and FM bands.
3.) Rotate the TUNING control on the right side panel to tune to the desired station.
4.) Rotate the VOLUME control on the left side panel to adjust the volume level.
5.) When you are finished listening press the ALARM OFF/POWER button to turn
the unit ‘Off’. The POWER LED indicator goes off.
Antenna Information
AM
The AM ferrite bar antenna is inside the cabinet. If AM reception is unsatisfactory
try turning the entire unit slightly until you find the direction that provides the best
reception for the desired station.
FM
Make sure the FM lead wire antenna is extended to it’s full length. You may have to
vary the direction of the wire antenna to find the position that provides the best
reception.
11
CKD1100_052107.p65
11
21/5/2007, 10:44
Playing Compact Discs
NOTE: Although this CD player can read CD-R and CD-RW discs, in addition
to normal CDs, however the playability of CD-R/RW discs may be affected by
the type of software that was used to create the discs, as well as the quality
and condition of the blank media you are using. 100% playability cannot be
guaranteed. This is not an indication of a problem with the player.
Normal Playback
1.) Press the ALARM OFF/POWER button to switch the unit ‘On’. The POWER
LED indicator comes ‘On’.
2.) Press the
CD PLAY/PAUSE button to enter CD playing mode.
3.) Press on the CD door in the area marked OPEN/CLOSE to open the door. If
you have not already done so, remove the ‘dummy CD’transit protection card
from the CD player and discard it
4.) Place your disc on the center spindle with the printed label side facing up.
Press down near the center of the disc to make sure it is firmly ‘seated’on the
spindle, press OPEN/CLOSE area to close the CD door.
5.) Two dashes “cd – –” flash while the player
reads the table of contents of the disc.
The display will show the total number
of tracks for a few seconds and then
return to the correct time.
To see the track number at any time during playback press the ALARM SET/
DISPLAY button. The track number will appear for several seconds and then
the display returns to the correct time.
NOTE: If the disc is inserted incorrectly, or if the disc is badly scratched
and cannot be read by the player,
“cd00” will appear on the display for a
few seconds, and then the display
returns to the correct time.
12
CKD1100_052107.p65
12
21/5/2007, 10:44
6.) Press the
CD PLAY/PAUSE button to begin playback.
The display will briefly show “cd: 1”
(Track 1) and playback on track 1 begins.
After a few seconds the display returns to the correct time.
7.) To Pause briefly during playback press the
CD PLAY/PAUSE button.
The two dots “ : ” flash and after a few
seconds the display returns to correct
time. The sound stops, but the disc
continues to spin.
Press
CD PLAY/PAUSE button again to cancel pause and resume playback.
8.) To skip forward or backward to other tracks repeatedly press the
or
buttons until the desired track number appears in the display. Playback will
begin on the selected track.
9.) To stop playback at any time press the
STOP button. After the last track has
s
played the disc stops automatically. Press the OPEN/CLOSE button to open
the CD door and remove your disc.
IMPORTANT NOTE:
You cannot stop CD playback by pressing the ALARM OFF/POWER button.
You must press the CD
STOP button to stop CD playback first, and then
you can press the ALARM OFF/POWER button to shut the power off.
13
CKD1100_052107.p65
13
21/5/2007, 10:44
To Start Playback From A Specific Track
Load your disc and wait until the display shows the total number of tracks.
or
Press the
desired track.
buttons to select the
While the track number is still appearing
press the
CD PLAY/PAUSE button.
Playback will begin on the selected track and
continue until the end of the disc.
High Speed Music Search
You can search rapidly forward or backward within a track to locate a specific
musical passage.
Depress and hold the
or
buttons to begin high speed search.
The display will show the current track and the player moves rapidly forward or
backward.
When you reach the desired passage release
the
or
resumes.
button and normal playback
ck
NOTE: The volume level is automatically reduced during high speed music
search.
14
CKD1100_052107.p65
14
21/5/2007, 10:44
Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you
to program any disc to play just the tracks you want to hear in the exact order that
you want to hear them. You may program a track or tracks to play more than once
if desired.
NOTE: Programming can only be done while the player is in the Stop mode. If
STOP button to stop playback before performing
a disc is playing press the
the programming steps below.
1.) Turn the unit ‘On’, press the
CD PLAY/PAUSE button to select CD function
and load the desired disc in the player.
Wait until the player reads the disc and
the display shows the total track number.
2.) Press the CLK.ADJ/PROG. button.
The AM/PROG. indicator and the
Program Number “0 1” flash in the
display, indicating that you can select the
first track to be programmed.
3.) Press the
or
buttons to select
ct
the first track. The desired track number
appears on the display.
Example: Track “7”.
4.) Press the CLK.ADJ/PROG. button again.
The selected track is entered in Program
memory number 01 and the display
advances to “0 2” indicating that you can
select the next track to be programmed.
5.) Repeat Steps 3 and 4 to program up to 20 tracks in the memory.
15
CKD1100_052107.p65
15
21/5/2007, 10:44
6.) After you have programmed all the desired tracks press the
CD PLAY/
PAUSE button to begin programmed playback. The AM/PROG. indicator stops
flashing and remains ‘On’. Playback will begin on the first track you programmed
and continue until all programmed tracks have been played.
As each programmed track starts playing the display will briefly show the track
number being played and then return to the correct time.
NOTES:
• After all programmed tracks have played the player stops but the program
remains in the memory.
Press the CLK.ADJ/PROG. button and then the
CD PLAY/PAUSE
button to begin programmed playback again.
• To clear the program from the memory after the disc stops, press the
CLK.ADJ/PROG. button and then press the
STOP button.
Opening the CD door, pressing the ALARM OFF/POWER button to shut
the unit ‘Off’, or switching to the Radio function also clears the program.
16
CKD1100_052107.p65
16
21/5/2007, 10:44
Adjusting the Wake-up Times
This clock radio has two separate wake-up alarms that can be set and used
independently. To set or adjust the wake-up times please proceed as follows:
1.) Depress and hold the ALARM SET/
DISPLAY button for at least two seconds
until just the Hour digits and the AL1
(Alarm 1) indicator are flashing.
2.) While the AL1 Hour digits are flashing press the
to set the display to the correct wake-up hour.
or
buttons repeatedly
Example: 7:00 AM
Observe the PM indicator to make sure you have set the wake-up hour correctly.
If the PM indicator is ‘On’the wake-up time displayed is “PM”. If the PM indicator
is ‘Off’the wake-up time displayed is “AM”.
3.) When the correct wake-up hour is
flashing press the CLK. ADJ/PROG.
button again.
The Hour digits stop flashing and the minute digits begin to flash.
4.) While the Minute digits are flashing press
the
or
buttons repeatedly to set
the display to the correct wake-up
minute.
5.) When the desired Alarm 1 wake-up time is showing on the display, press the
CLK. ADJ/PROG. button to store the Alarm 1 wake-up time in the timer memory.
The AL2 (Alarm 2) indicator and the
Alarm 2 Hour digits begin flashing.
NOTE: If you do not need to adjust the Alarm 2 wake up time you may just
wait 10 seconds. After 10 seconds the Alarm 2 display stops flashing and
the clock returns to the correct time.
17
CKD1100_052107.p65
17
21/5/2007, 10:44
6.) While the Alarm 2 Hour digits are flashing press the
repeatedly to set the display to the correct wake-up hour.
or
buttons
Example: 9:00 AM
Observe the PM indicator to make sure you have set the wake-up hour correctly.
If the PM indicator is ‘On’the wake-up time displayed is “PM”". If the PM indicator
is ‘Off’the wake-up time displayed is “AM”.
7.) When the correct wake-up hour is
flashing press the CLK. ADJ/PROG.
button again.
The Hour digits stop flashing and the minute digits begin to flash.
8.) While the Minute digits are flashing press
the
or
buttons repeatedly to set
the display to the correct wake-up
minute.
9.) When the desired Alarm 2 wake-up time is showing on the display, press the
CLK. ADJ/PROG. button to store the Alarm 2 wake-up time in the timer memory.
The display stops flashing and returns
to the correct time. The Alarm 2 indicator
disappears.
IMPORTANT: After you press the CLK. ADJ/PROG. button you must make
your wake-up time adjustments within 10 seconds while the wake-up time
display is flashing. After 10 seconds the wake-up time display stops flashing,
the display returns to the correct time, and no wake-up time adjustments can
be made. If this occurs you must begin with Step 1 above and start the wakeup time adjustment process again.
18
CKD1100_052107.p65
18
21/5/2007, 15:56
Setting The Alarms / Selecting The Wake-up Mode
After you have adjusted the wake-up times on one or both alarms you must press
the respective ALARM 1 and/or ALARM 2 buttons one, two or three times, to
activate the alarms and select the wake-up mode.
The color of the AL1 and AL2 indicators will change according to the wake-up
mode that you select - Buzzer, Radio, or CD.
• Press the ALARM 1 or ALARM 2 button once.
The AL indicator is Red. This indicates the Wake To Buzzer mode is selected
and the alarm is ‘On’.
• Press the ALARM 1 or ALARM 2 button twice.
The AL indicator is Green. This indicates the Wake To Radio mode is selected
and the alarm is ‘On’.
• Press the ALARM 1 or ALARM 2 button three times.
The AL indicator is Yellow. This indicates the Wake To CD mode is selected
and the alarm is ‘On’.
• Press the ALARM 1 or ALARM 2 button a fourth time and the AL1 or AL2
indicators disappear. This indicates that the alarms are canceled.
19
CKD1100_052107.p65
19
21/5/2007, 10:44
Wake To Buzzer
1.) Check the wake-up time settings for Alarm 1, Alarm 2, or both alarms and
adjust the wake up times if necessary.
2.) Press the ALARM 1 and/or ALARM 2 buttons once. The AL1 and/or AL2
indicators appear Red.
3.) At the selected wake up times the buzzer will turn on. It will continue for one
hour and then stop automatically and reset itself for the following day.
4.) To stop the buzzer immediately, press the ALARM OFF/POWER button.
Wake To Radio
1.) Check the wake-up time settings for Alarm 1, Alarm 2, or both alarms and
adjust the wake up times if necessary.
2.) Turn the Radio ‘On’, tune to the desired station and set the VOLUME control to
the desired level to wake you up, then turn the radio ‘Off’again.
3.) Press the ALARM 1 and/or ALARM 2 buttons twice. The AL1 and/or AL2
indicators appear Green.
4.) At the selected wake up times the Radio will turn on. It will continue for one
hour and then stop automatically and reset itself for the following day.
5.) To stop the Radio immediately, press the ALARM OFF/POWER button.
20
CKD1100_052107.p65
20
21/5/2007, 10:44
Wake To CD
1.) Check the wake-up time settings for Alarm 1, Alarm 2, or both alarms and
adjust the wake up times if necessary.
2.) Insert the desired CD in the CD player, start playback and adjust the VOLUME
to the desired level. Then press the STOP button to stop the disc and the
ALARM OFF/POWER button to shut the power ‘Off’.
3.) Press the ALARM 1 and/or ALARM 2 buttons three times. The AL1 and/or
AL2 indicators appear Yellow.
4.) At the selected wake up times the CD player will turn on. It will play for one
hour, or until the end of the disc, whichever comes first, and then stop
automatically and reset itself for the following day.
5.) To stop the CD player immediately, press the ALARM OFF/POWER button.
NOTE: If there’s no CD inserted, or the CD is damaged, it will automatically
change to Buzzer.
21
CKD1100_052107.p65
21
21/5/2007, 10:44
Canceling The Alarms
To cancel the alarms completely press the respective ALARM 1 and/or ALARM 2
buttons until the AL1 and/or AL2 indicators disappear.
Snooze/Repeat Alarm
After the alarm turns on in the morning you can press the SNOOZE button for a
few extra minutes sleep. The alarm will stop for approximately 9 minutes and then
come on again. Snooze operation can be repeated several times if desired, but
after one hour the alarm will not turn ‘On’again.
Dimmer Control
The display DIMMER selector switch located on the left side cabinet was set to the
HIGH position at our factory.
If you find the display to be too bright for sleeping, slide the DIMMER selector
switch to the LOW position.
22
CKD1100_052107.p65
22
21/5/2007, 10:44
Sleep To Music Timer
You can use the sleep timer to fall asleep to the Radio or CD player up to 90
minutes and have the unit shut off automatically.
1.) Press the ALARM OFF/POWER button to turn the power ‘On’. Operate the
Radio or CD player as usual. Adjust the VOLUME to the desired level. The
level you select for “Sleep To Music” is the same level you will hear when the
alarm turns ‘On’in the morning.
2.) Press and hold the SLEEP button to
select the desired amount of sleep timer
from 90 minutes to one minute. The
SLEEP indicator comes ‘On’.
3.) When the display shows the desired amount of time, release the SLEEP button.
After 5 seconds the display changes
back to the correct time.
The Radio or CD play will continue until the sleep timer counts down to ”00”
and then shut off automatically.
4.) To stop the Radio or CD player before the sleep timer counts down to “00”,
press the ALARM OFF/STANDBY button to turn the unit “Off”.
NOTE: If you are falling asleep to CD, the sound stops when the disc ends,
even if a longer sleep time was selected.
23
CKD1100_052107.p65
23
21/5/2007, 10:44
Auxiliary Input Jack (Connection Cable Not Included)
This unit includes an AUX input jack to allow you to connect external devices, such
as an iPod® or portable MP3 player, and listen to the music stored on your external
device through the speakers of this radio.
Connect the headphone jack of your external device to the AUX input jack located
on the front panel of this unit. The connection cable is not included.
IMPORTANT:
When you connect a cable to the AUX input jack of this unit the ‘function’
selector automatically switches from Radio or CD to Auxiliary Input. You must
disconnect the cable from the AUX input jack in order to listen to the Radio or
CD again.
After connecting your external device to the AUX input jack, slowly adjust
both the volume controls on this unit and your external device to find the desired
setting. Please note that if the VOLUME control on this radio is set to a low
level while the VOLUME control on your external device is set too high, the
sound will be distorted.
Remember to disconnect the connection cable after use in order to be able to
listen to the Radio or CD player again.
NOTE: If an external audio source is connected to the AUX (Auxiliary Input)
jack at the wake-up time the alarm will automatically default to the Buzzer
mode, regardless of the mode you selected.
24
CKD1100_052107.p65
24
21/5/2007, 10:44
Headphone (PHONES) Jack
This unit includes a 3.5mm PHONES (headphone) jack on the front panel. This
allows you to connect a set of stereo headphones (not included) for private listening
without disturbing others. When headphones are connected the built-in speakers
are automatically disconnected.
IMPORTANT! When using stereo headphones always set the volume control
to a low level before you put on the headphones. Then put on the headphones
and gradually adjust the volume control to the desired level.
Remember that prolonged listening with headphones or ear buds at high volume
levels may eventually cause hearing loss.
25
CKD1100_052107.p65
25
21/5/2007, 10:44
CARE AND MAINTENANCE
Compact Disc Care
• To remove a disc from its storage case, press down on the center of the case
and lift the disc out, holding it carefully by the edges.
• Fingerprints and dust should be carefully wiped off the disc’s recorded surface
with a soft cloth.Unlike conventional records, compact discs have no grooves
to collect dust and microscopic debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line from the inside to the outside of
the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.
• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
• Never write on or affix labels to the surface of compact discs.
Care Of The Cabinet
• If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any
wax or polish sprays on the cabinet.
• If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never
use abrasive cloths or polishes as these will mar the finish of your unit.
Caution
Never allow any water or other liquids to get inside the unit while cleaning.
26
CKD1100_052107.p65
26
21/5/2007, 10:44
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
Symptom
Radio
Possible Cause
Solution
Noise or sound
distorted on AM or FM
Station not tuned properly for
AM or FM.
Retune the AM or FM
broadcast station.
broadcasts.
FM: FM Wire antenna is not
extended.
Extend FM Wire antenna.
AM: The bar antenna is not
positioned correctly.
Reposition the unit until
best reception is obtained.
AM or FM, no sound.
Compact Disc Player
Volume at minimum.
Increase Volume.
CD Player will not play.
CD is not installed or installed
incorrectly.
Insert CD with Iabel side
up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
CD does not shut off
You must always press the
STOP button to stop CD
when pressing the
ALARM OFF/POWER
This is normal operation.
button during playback.
playback, then press the
ALARM OFF/POWER
button.
R
SERVICE
TO FIND THE LOCATION AND PHONE
NUMBER OF YOUR NEAREST SERVICE
CENTER PERMITTED TO PERFORM
WARRANTY...
CALL TOLL FREE: 1-800-695-0098
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
PLEASE CALL:
1-800-898-9020
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
Emerson Radio Corp.,
Consumer Affairs Dept.,
5101 Statesman Drive,
Irving, TX 75063.
27
CKD1100_052107.p65
27
21/5/2007, 10:44
LIMITED WARRANTY
Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of
ninety (90) days from the date of original purchase in the U.S. With your dated
proof of purchase, we will provide repair service at no charge for labor and parts
at an authorized Depot Repair Facility, or replace the product in our discretion.
For repair or replacement, pack your unit in a padded box, enclose your check or
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required
by California residents) to cover shipping and handling costs, and enclose a copy
of your proof of purchase. Send your unit to:
Emerson Radio Corp.,
5101 Statesman Drive,
Irving, TX 75063.
This warranty does not cover damage from negligence, misuse, abuse, accident,
failure to follow operating instructions, commercial use, rental, repairs by an
unauthorized facility, or products purchased, used, serviced or damaged outside
of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
The Serial Number of your unit is located on a label on the bottom cabinet.
Please take a moment to locate the Serial Number of your unit and write it in the
space provided below. You may be asked to provide this number when calling to
request customer service.
Model No: CKD1100/CKD1100BL/CKD1100GN/CKD1100PK
Serial Number:
28
CKD1100_052107.p65
28
21/5/2007, 10:44
CKD1100-052107-03
CKD1100_052107.p65
Printed in China
29
21/5/2007, 10:44