Motorola TETRA MTM800 Installation manual

MTM800 Enhanced
TETRA Mobile Terminal
Installation Manual
American Communication Systems
Discover the Power of Communications ™
TO ORDER – VISIT http://www.ameradio.com
Publication Number
6866539D30-L
When printed by Motorola
@6866539D30@
COPYRIGHT
MTM800 Enhanced Mobile Terminal Installation Manual
3
COPYRIGHT
Copyrights
© 2007 - 2010 by Motorola Inc.
All rights reserved.
No part of this manual may be reproduced, transmitted, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, without
the prior written permission of Motorola Inc.
Computer Software Copyrights
The Motorola products described in this manual may include copyrighted Motorola
computer programs stored in semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola certain exclusive rights for copyrighted
computer programs including, but not limited to, the exclusive right to copy or reproduce in
any form the copyrighted computer program. Accordingly, any copyrighted Motorola
computer programs contained in the Motorola products described in this manual may not
be copied, reproduced, modified, reverse-engineered, or distributed in any manner without
the express written permission of Motorola. Furthermore, the purchase of Motorola
products shall not be deemed to grant either directly or by implication, estoppel, or
otherwise, any license under the copyrights, patents or patent applications of Motorola,
except for the normal non-exclusive royalty-free license to use that arises by operation of
law in the sale of a product.
Trademarks
Motorola, the Motorola Logo and all other trademarks identified as such herein are
trademarks of Motorola Inc. All other product or service names are the property of their
respective owners.
4
MTM800 Enhanced Mobile Terminal Installation Manual
THIS PAGE INTENTIONALLY LEFT BLANK
Product Safety and RF Exposure
MTM800 Enhanced Mobile Terminal Installation Manual
5
IMPORTANT SAFETY INFORMATION
Icon Conventions
The signal word Warning with the associated safety icon
implies information that, if disregarded, could result in
death or serious injury, or serious product damage.
The signal word Caution with the associated safety icon
implies information that, if disregarded, may result in
minor or moderate injury, or serious product damage.
The signal word Caution may be used without the safety
icon to state potential damage or injury that is not related
to the product.
Notes contain information more important than the
surrounding text, such as exceptions or preconditions.
They also refer the reader elsewhere for additional
information, remind the reader how to complete an action
(when it’s not part of the current procedure, for instance),
or tell the reader where something is located on the
screen. There is no warning level associated with a Note.
Installation Requirements for Compliance with Radio
Frequency (RF) Energy Exposure Safety Standards
ATTENTION!
This radio is intended for use in occupational/controlled conditions, where users have full knowledge
of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is
NOT authorized for general population, consumer, or any other use.
To ensure compliance to RF Energy Safety Standards:
•
Install only Motorola approved antennas and accessories.
•
Be sure that Product Safety and RF Safety Booklet enclosed with this radio is available to the
end user upon completion of the installation of this radio.
Before using this product, the operator must be familiar with the RF energy awareness information and
operating instructions in the Product Safety and RF Exposure booklet enclosed with each radio
(Motorola Publication part number 6866537D37) to ensure compliance with Radio Frequency (RF)
energy exposure limits.
For a list of Motorola-approved antennas and other accessories, visit the following web site which lists
approved accessories for your radio model:
http://www.motorola.com/governmentandenterprise
6
MTM800 Enhanced Mobile Terminal Installation Manual
Product Safety and RF Exposure
ADDITIONAL IMPORTANT INFORMATION FOR
SERVICING AND INSTALLING THE TERMINAL
Only specialized workshops should be contacted for installation, maintenance and repair work.
This unit is equipped with protection fuses in the Power and Ignition Sense Cable. Replace
these fuses only with the original ratings!
Failure to use correct manufacturer-approved
parts may result in physical damage to this unit.
Fuse for Power Cable GKN6270/GKN6274:
Fuse for Ignition Sense Cable HKN9327:
10A (Motorola Part Number: 6500139767)
4A (Motorola Part Number: 6580283E02)
DOCUMENT HISTORY
MTM800 Enhanced Mobile Terminal Installation Manual
7
DOCUMENT HISTORY
The following major changes have been implemented in this manual since the previous edition:
Edition
Description
Date
6866539D30-A
Initial edition
Mar 2007
6866539D30-B
Ferrite Clamp included
Mar 2007
6866539D30-C
Legacy errors corrections
May 2007
6866539D30-D
Changes in ferrite clamp installation
Accessory part numbers updated
Aug 2007
6866539D30-E
Note regarding installation
PIN 12 description corrections
6866539D30-F
Toroids added for Remote Mount Installation
Mar 2009
6866539D30-G
Data Box solution included
May 2009
6866539D30-H
Rated Power and Distance table corrected
May 2009
6866539D30-J
Dual Control Head installation
6866539D30-K
Ferrite Clamps for Dual Control Head cable added
Sep 2009
6866539D30-L
Dual Control Head installation removed
May 2010
Jul 2008
Jul 2009
8
MTM800 Enhanced Mobile Terminal Installation Manual
THIS PAGE INTENTIONALLY LEFT BLANK
CONTENTS
MTM800 Enhanced Mobile Terminal Installation Manual
9
CONTENTS
COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Computer Software Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Icon Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation Requirements for Compliance with Radio Frequency (RF) Energy
Exposure Safety Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Additional Important Information for Servicing and Installing the Terminal . . . . 6
DOCUMENT HISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Scope of This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
MTM800 Enhanced Manuals and User Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Warranty and Service Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Europe, Middle East and Africa Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EMEA Systems Support Centre (ESSC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EMEA Systems Component Centre (ESCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Identification and Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EMEA Test Equipment Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Updated Versions of this Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Asia, Pacific Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Piece Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Further Assistance from Motorola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Identification and Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Latin America Region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
16
16
17
17
17
17
18
18
18
18
18
19
MODEL INFORMATION & ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . 21
MTM800 Enhanced Mobile Terminal Model Information . . . . . . . . . . . . . . . . . . . 21
Sales Model Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10
MTM800 Enhanced Mobile Terminal Installation Manual
CONTENTS
Model Specifications* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Model Descriptions** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Accessories-to-Model Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DC Power Cable Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Installation Planning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Ignition Sense Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Terminal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Enhanced Control Head Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Trunnion Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Dashboard Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing the Radio in an Automotive Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Mounting the Radio in the Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Remove the Radio from the Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Desktop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Remote Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion
41
Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket . . . . . . 42
Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the
DIN Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Adding Extra Connectivity to the Remote Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Installing the Accessories Expansion Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Motorcycle Mount Enhanced Control Head Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Installing the Motorcycle Mount Enhanced Control Head . . . . . . . . . . . . . . . . . . . . . . . 46
Mechanical Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Installation of the Motorcycle Mount TELCO Cable (PMKN4030) . . . . . . . . . . . . . . . . 48
Adding Extra Connectivity to the Motorcycle Mount Enhanced Control Head . . . . . . . 48
Data Expansion Head Enhanced Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Data Expansion Head Enhanced Radio without Control Head . . . . . . . . . . . . . . . . . . . . . 49
Data Expansion Head Enhanced with 3rd Party Control Head . . . . . . . . . . . . . . . . . . . . . 50
Data Box Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Junction Box Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
CONTENTS
MTM800 Enhanced Mobile Terminal Installation Manual
11
Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connection Plan for the Junction Box Accessory Terminal . . . . . . . . . . . . . . . . . . . . .
Connection Plan for Accessory Connector Kit (GMBN1021). . . . . . . . . . . . . . . . . . . .
53
53
54
57
Connectors and Pin Assignment of the Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Transceiver Rear Side - Pin Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Accessory Connection Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Connectors and Pin Assignment of Data Expansion Head Enhanced and
Remote Head Enhanced. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
10-Pin TELCO Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
25-Pin subD Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
9-Pin subD Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Connector and Pin Assignment of the Enhanced Control Head . . . . . . . . . . . . 66
Connecting Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion
Head Enhanced (Motorcycle Mount TELCO Cable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-toAccessories (Accessories Expansion Cable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Radio-to-Junction Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Data Expansion Head Enhanced Radio-to-Data Device . . . . . . . . . . . . . . . . . . . . . . . . . 72
Data Expansion Head Enhanced Radio-to-Fist Microphone . . . . . . . . . . . . . . . . . . . . . . 73
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Making Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Removing the Existing Coiled Cord Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Radio-to-Data Device: Active Data Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Cable Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Vehicle Antenna Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Mobile Radio Operation and EME Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting an Antenna Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Completing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
75
76
76
External Speaker Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
UPGRADING THE TERMINAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Upgrade Procedure from MTM800 to MTM800 Enhanced. . . . . . . . . . . . . . . . . . 85
From an MTM800 Dash/Desk Radio to an MTM800 Enhanced Dash/Desk Radio. . .
From an MTM800 Remote Radio to an MTM800 Enhanced Remote Radio. . . . . . . .
From an MTM800 Motorcycle Radio to an MTM800 Enhanced Motorcycle Radio . . .
Using the MR7.4 or Subsequent Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
85
86
87
88
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Product Specific Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
12
MTM800 Enhanced Mobile Terminal Installation Manual
CONTENTS
Equipment Electrical Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Normal Load Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Fuse Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
SCOPE
MTM800 Enhanced Mobile Terminal Installation Manual
13
SCOPE
Scope of This Manual
This manual is intended for use by service technicians familiar with similar types of equipment. It
contains information required for the installation of the equipment described and is current as of the
printing date. Changes which occur after printing date may be incorporated by a complete Manual
revision or alternatively as additions.
The mobile terminal has to be installed by trained service
personnel only.
All installations should take place in accordance with the
requirements of the vehicle and antenna
manufacturer/supplier.
This manual is divided into the following sections:
• Safety and General Information
•
Document History
•
Contents
•
Scope of this manual
•
Model Information
•
Installation
•
APPENDIX Product Specific Information
14
MTM800 Enhanced Mobile Terminal Installation Manual
MTM800 Enhanced Manuals and User Guides
Installation Instructions
6866539D30 MTM800 Enhanced Installation Manual (English)
Service Manual
6866539D28
MTM800 Enhanced Basic Service Manual (English)
Quick Start Guides
68015000276
68015000277
68015000278
68015000279
68015000280
68015000281
68015000275
68015000274
68015000244
68015000241
68015000234
68015000227
68015000224
68015000221
68015000222
68015000303
68015000304
68015000305
68015000312
MTM800 Enhanced Quick Start Guide (English)
MTM800 Enhanced Quick Start Guide (Spanish)
MTM800 Enhanced Quick Start Guide (Norwegian)
MTM800 Enhanced Quick Start Guide (Dutch)
MTM800 Enhanced Quick Start Guide (German)
MTM800 Enhanced Quick Start Guide (Polish)
MTM800 Enhanced Quick Start Guide (Italian)
MTM800 Enhanced Quick Start Guide (French)
MTM800 Enhanced Quick Start Guide (Danish)
MTM800 Enhanced Quick Start Guide (Swedish)
MTM800 Enhanced Quick Start Guide (Traditional Chinese)
MTM800 Enhanced Quick Start Guide (Simplified Chinese)
MTM800 Enhanced Quick Start Guide (Korean)
MTM800 Enhanced Quick Start Guide (Arabic)
MTM800 Enhanced Quick Start Guide (Lithuanian)
MTM800 Enhanced Quick Start Guide (Portuguese)
MTM800 Enhanced Quick Start Guide (Russian)
MTM800 Enhanced Quick Start Guide (Greek)
MTM800 Enhanced Quick Start Guide (Romanian)
User Guides
6866539D25
6871075M01
6871076M01
6871077M01
6866539D49
6866539D78
6866539D77
6866539D80
6866539D79
MTM800 Enhanced Feature User Guide (English)
MTM800 Enhanced Feature User Guide (Simplified Chinese)
MTM800 Enhanced Feature User Guide (Traditional Chinese)
MTM800 Enhanced Feature User Guide (Korean)
MTM800 Enhanced Feature User Guide (Hungarian)
MTM800 Enhanced Feature User Guide (German)
MTM800 Enhanced Feature User Guide (Danish)
MTM800 Enhanced Feature User Guide (Croatian)
MTM800 Enhanced Feature User Guide (Macedonian)
Safety Leaflets
6804112J96 Mobile Safety Leaflet (APAC & LACR) or
6804113J25 Mobile Safety Leaflet (APAC & LACR) especially for TETRA Mobiles
6866537D37Mobile Safety Leaflet (EMEA)
SCOPE
SCOPE
MTM800 Enhanced Mobile Terminal Installation Manual
15
Warranty and Service Support
Motorola offers long term support for its products. This support includes full exchange and/or repair
of the product during the warranty period, and service/ repair or spare parts support out of warranty.
Prior to shipping any terminal back to the appropriate Motorola warranty depot, please contact
Customer Resources or your Motorola dealer, distributor or reseller.
All returns must be accompanied by a Warranty Claim Form, available from your Customer Service
representative or Motorola Online Extranet (MOL) or your Motorola dealer, distributor or reseller.
Warranty Period and Return Instructions
The terms and conditions of warranty are defined fully in the Motorola Customer, Dealer or
Distributor or Reseller contract. These conditions may change from time to time and the following
notes are for guidance purposes only.
In instances where the product is covered under a "return for replacement" or "return for repair"
warranty, a check of the product should be performed prior to shipping the unit back to Motorola.
This is to ensure that the product has been correctly programmed or has not been subjected to
damage outside the terms of the warranty.
Prior to shipping any terminal back to the appropriate Motorola warranty depot, please contact
Customer Resources (please refer to following pages). All returns must be accompanied by a
Warranty Claim Form, available from your Customer Services representative. Products should be
shipped back in the original packaging, or correctly packaged to ensure no damage occurs in transit.
After Warranty Period
After the Warranty period, Motorola continues to support its products in two ways.
•
Motorola's Regional Radio Support Centres offer a repair service to both end users and
dealers at competitive prices.
•
AAD supplies individual parts and modules that can be purchased by dealers who are
technically capable of performing fault analysis and repair.
16
MTM800 Enhanced Mobile Terminal Installation Manual
SCOPE
Service Information
Europe, Middle East and Africa Region
EMEA Systems Support Centre (ESSC)
The EMEA Systems Support Centre provides a remote Technical Support Service to help customers
resolve technical issues and quickly restore networks and systems. This team of highly skilled
professionals is available to customers with current service agreements in place that include the Technical
Support Service. The ESSC technical experts may be accessed through the EMEA Integrated Call Center
either electronically or using the telephone numbers listed below. If you are unsure as to whether or not
your current service agreement entitles you to benefit from this service, or if you would like more
information about the Technical Support Service, please contact your local customer support or account
manager for further information.
Contact details:
Email: ESSC@motorola.com
List of Telephone Numbers:
Country
In Country Number to Dial
Austria
01206091087
Denmark
043682114
France
0157323434
Germany
06950070204
Italy
0291483230
Lithuania
880 030 828
Netherlands
0202061404
Norway
24159815
Portugal
0217616160
Spain
0912754787
Russia
810 800 228 41044 (Alternative 810 800 120 1011)
Saudi Arabia
800 844 5345
United Kingdom
(except for Thales/LUL Connect)
02030 277499
Thales/LUL Connect
02030 277500
It is recommended that access from any other country uses: +44 2030 277499
EMEA Systems Component Centre (ESCC)
The European Systems Component Centre provides a repair service for infrastructure equipment.
Customers requiring repair service should contact the Customer Information Desk to obtain a Return
SCOPE
MTM800 Enhanced Mobile Terminal Installation Manual
17
Material Authorisation number. The equipment should then be shipped to the following address unless
advised otherwise.
Motorola GmbH, European Systems Component Centre, Am Borsigturm 130, 13507 Berlin, Germany
Contact details:
Email: ESCC.admin@motorola.com
Telephone Number: +49 30 66861555
Fax: +49 30 66861426
Mon - Fri 08:00 am to 06:00 pm (CET)
Parts Identification and Ordering
Request for help in identification of non-referenced spare parts should be directed to the Customer Care
Organization of Motorola’s local area representation. Orders for replacement parts, kits and assemblies
should be placed directly on Motorola’s local distribution organization or via the Extranet site Motorola
Online at https://emeaonline.motorola.com.
EMEA Test Equipment Support
Information related to support and service of Motorola Test Equipment is available by calling the Motorola
Test Equipment Service Group in Germany at +49 (0) 6128 702179, Telefax +49 (0) 6128 951046, through
the Customer Care Organization of Motorola’s local area representation, or via the Internet at
http://www.gd-decisionsystems.com/cte/.
Your Input
...is much appreciated. If you have any comments, corrections, suggestions or ideas for this publication or
any other requirements regarding Motorola publications, please send an e-mail to
doc.emea@motorola.com.
Updated Versions of this Manual
...are available at our Extranet site Motorola Online. Contact us at doc.emea@motorola.com for access.
18
MTM800 Enhanced Mobile Terminal Installation Manual
SCOPE
Asia, Pacific Region
Piece Parts
Some replacement parts, spare parts, and/or product information can be ordered directly. If a
complete Motorola part number is assigned to the part, it is available from Motorola Radio
Aftermarket and Accessory Division (AAD). If no part number is assigned, the part is not normally
available from Motorola. If a parts list is not included, this generally means that no user-serviceable
parts are available for that kit or assembly.
Note on this digital TETRA Terminal: The CPS has no capability to tune the terminal. Tuning the
terminal can only be performed at the factory or at the appropriate Motorola Repair Centre.
Component replacement can affect the terminal tuning and must only be performed by the
appropriate Motorola Repair Centre.
All orders for parts/information should include the complete Motorola identification number. All part
orders should be directed to your local AAD office. Please refer to your latest price pages.
Technical Support
Technical support is available to assist the dealer/distributor in resolving any malfunction which may
be encountered. Initial contact should be by telephone wherever possible.
When contacting Motorola Technical Support, be prepared to provide the product model number
and the unit’s serial number.
Further Assistance from Motorola
You can also contact the Customer Help Desk through the following web address:
http://www.motorola.com/governmentandenterprise/contactus.
Parts Identification and Ordering
Request for help in identification of non-referenced spare parts should be directed to the Customer
Care Organization of Motorola’s local area representation. Orders for replacement parts, kits and
assemblies should be placed directly on Motorola’s local distribution organization or via Motorola
Online (Extranet).
SCOPE
MTM800 Enhanced Mobile Terminal Installation Manual
Latin America Region
Latin America Radio Support Centres
The Customer Support is available through the
following service centres:
Warranty and Repairs:
MOTOROLA DE COLOMBIA SERVICE
CENTRE
Torre Banco Ganadero
Carrera 7 No. 71-52
Torre B piso 13
Oficina 1301
Bogota - Colombia
(571) 376-6990
MOTOROLA DE MEXICO SERVICE CENTRE
Bosques de Alisos #125
Col. Bosques de las Lomas
CP 05120 Mexico DF
5252576700
Piece Parts:
To order parts in Latin America and the
Caribbean contact your local Motorola CGISS
representative.
MOTOROLA, INC.
Latin American Countries Region
789 International Parkway
Sunrise, FL 33325
USA 954-723-8959
MOTOROLA DE ARGENTINA
Ave. del Libertador 1855
B1638BGE, Vicente Lopez
Buenos Aires, Argentina
5411-4317-5300
MOTOROLA DE LOS ANDES C.A.
Ave. Francisco de Miranda
Centro Lido, Torre A
Piso 15, El Rosal
Caracas, 1060 Venezuela
58212-901-4600
MOTOROLA DO BRASIL LTDA.
Av. Chedid Jafet
222 Bloco D Conjuntos 11,12,21,22 E 41
Condominio Millennium Office Park
04551-065- Vila Olimpia, Sao Paulo
Brasil
5511-3847-668
19
MOTOROLA CHILE
Ave. Nueva Tajamar 481
Edif. World Trade Center
Of. 1702, Torre Norte
Las Condes
Santiago, Chile
562-338-9000
MOTOROLA DE COLOMBIA, LTDA.
Carrera 7 #71-52
Torre A, Oficina 1301
Bogotá, Colombia
571-376-6990
MOTOROLA DE COSTA RICA
Parque Empresarial Plaza Roble
Edificio El Portico, 1er Piso
Centro de Negocios Internacional
Guachepelin, Escazu
San Jose, Costa Rica
506-201-1480
MOTOROLA DEL ECUADOR
Autopist Gral. Rumiñahui, Puente 2
Conjunto Puerta del Sol Este-Ciudad Jardin
Pasa E, Casa 65
Quito, Ecuador
5932-264-1627
MOTOROLA DE MEXICO, S.A.
Calle Bosques de Alisos #125
Col. Bosques de Las Lomas
05120 México D.F.
México
52-555-257-6700
MOTOROLA DEL PERU, S.A.
Ave. República de Panama 3535
Piso 11, San Isidro
Lima 27, Peru
511-211-0700
Technical Support:
https://businessonline.motorola.com, go to
Contact Us to request technical support
Some replacement parts, spare parts, and/or
product information can be ordered directly. If a
complete Motorola part number is assigned to
the part, it is available from Motorola. If no part
number is assigned, the part is not normally
available from Motorola. If the part number is
appended with an asterisk, the part is
serviceable by Motorola Depot only. If a parts list
is not included, this generally means that no
user-serviceable parts are available for that kit
or assembly.
20
MTM800 Enhanced Mobile Terminal Installation Manual
THIS PAGE INTENTIONALLY LEFT BLANK
MODEL INFORMATION & ACCESSORIES MTM800 Enhanced Mobile Terminal Installation Manual
21
MODEL INFORMATION & ACCESSORIES
MTM800 Enhanced Mobile Terminal Model Information
This manual applies to the following Mobile Terminal Models
Type No.
Sales Model No.
Short Description
Model
MT512M
MT712M
MT812M
MT912M
M80RCS6TZ5AN
M80UCS6TZ5AN
M80NCS6TZ5AN
M80PCS6TZ5AN
MTM800 ENH 410-470 MHz, DASH
MTM800 ENH 806-870 MHz, DASH
MTM800 ENH 350-390 MHz, DASH
MTM800 ENH 380-430 MHz, DASH
M1
MT512M
MT712M
MT812M
MT912M
M80RCS6TZ4AN
M80UCS6TZ4AN
M80NCS6TZ4AN
M80PCS6TZ4AN
MTM800 ENH 410-470 MHz, DESK
MTM800 ENH 806-870 MHz, DESK
MTM800 ENH 350-390 MHz, DESK
MTM800 ENH 380-430 MHz, DESK
M2
MT512M
MT712M
MT812M
MT912M
M80RCS6TZ6AN
M80UCS6TZ6AN
M80NCS6TZ6AN
M80PCS6TZ6AN
MTM800 ENH 410-470 MHz, REMOTE
MTM800 ENH 806-870 MHz, REMOTE
MTM800 ENH 350-390 MHz, REMOTE
MTM800 ENH 380-430 MHz, REMOTE
M3
MT512M
MT712M
MT812M
MT912M
M80RCS6TZ2AN
M80UCS6TZ2AN
M80NCS6TZ2AN
M80PCS6TZ2AN
MTM800 ENH 410-470 MHz, M’CYCLE
MTM800 ENH 806-870 MHz, M’CYCLE
MTM800 ENH 350-390 MHz, M’CYCLE
MTM800 ENH 380-430 MHz, M’CYCLE
M4
MT512M
MT712M
MT812M
MT912M
M80RCA6TZ5AN
M80UCA6TZ5AN
M80NCA6TZ5AN
M80PCA6TZ5AN
MTM800 ENH 410-470 MHz, DATA
MTM800 ENH 806-870 MHz, DATA
MTM800 ENH 350-390 MHz, DATA
MTM800 ENH 380-430 MHz, DATA
M5
Sales Model Nomenclature
Position: 1 2 3 4
Typical Model Number: M 8 0 R
5
C
6
S
7
6
8
T
9
Z
1 0 11 1 2
5 A N
Type of Unit
M = Mobile Product
Model Series
Unique Variation
N = Standard Package
80 = MTM800 Enhanced
Frequency Band
M = 260 - 275 MHz
N = 350 - 390 MHz
P = 380 - 430 MHz
R = 410 - 470 MHz
U = 806 - 870 MHz
Level
Version Letter
Feature Level
5
4
2
6
=
=
=
=
Dash/Data Mount
Desk Mount
Motorcycle Mount
Remote Mount
C = 1.0 to 3.9 Watts
Physical Packages
S = Enhanced Control Head
A = Data Box (No Control Head)
Primary System Type
Z = TETRA
Channel Spacing
Primary Operation
6 = 20/25 kHz
T = Trunking
22
MTM800 Enhanced Mobile Terminal Installation Manual
MODEL INFORMATION & ACCESSORIES
Model Specifications*
GENERAL
ETSI:
RECEIVER
ETS 300 394-1
Type Number:
MTM800 ENH 410-470 MHz
MTM800 ENH 806-870 MHz
MTM800 ENH 350-390 MHz
MTM800 ENH 380-430 MHz
Power Supply:
Minimum:
Nominal:
Maximum:
Max. Current
Superheterodyne
Frequency Range:
MT512M
MT712M
MT812M
MT912M
Temperature Range for Transceiver:
Operating
Storage:
Receiver Type:
TRANSMITTER
MTM800 ENH
MTM800 ENH
MTM800 ENH
MTM800 ENH
10.8 Vdc
13.2 Vdc
15.6 Vdc
Approx. 3.5 A
380-430 MHz
851-870 MHz
350-390 MHz
410-470 MHz
Sensitivity (3.5%) BER:
25 kHz
-112 dBm
Intermodulation:
-47 dBm
Blocking (50-100 kHz):
-40 dBm
Dimensions (HxWxD) in mm:
Spurious Rejection:
-45 dBm
Transceiver with
Enhanced Control Head,
Dash Mount
Adjacent Channel
Interference Ratio:
60 x 185 x 175
Weight in grams:
Transceiver with
Enhanced Control Head,
Dash Mount
-45 dB
Frequency Stability:
1430
TMO
DMO
Frequency Range TMO:
MTM800 ENH
MTM800 ENH
MTM800 ENH
MTM800 ENH
380-430 MHz
806-825 MHz
350-390 MHz
410-470 MHz
Frequency Range DMO:
MTM800 ENH
MTM800 ENH
MTM800 ENH
MTM800 ENH
380-430 MHz
851-870 MHz
350-390 MHz
410-470 MHz
Frequency Stability:
Locked to Base
Not Locked to Base
+/-100 Hz
+/- 1 kHz
Spurious Emissions:
Locked to Base
Unlocked to Base
+/-100 Hz
+/- 1 kHz
Audio Rated (@4 Ohms):
For External Speaker:
Distortion at Rated Audio:
10 W
5% Max.
*) Technical information may be subject to change without further notice.
π/4DQPSK
RF Power:
Channel Spacing:
-30°C to +60°C
-40°C to +85°C
Modulation Type:
Conducted/Radiated - 36 dBm <=1GHz
- 30 dBm > 1GHz
Adjacent Channel Power Ratio (@ ±
25kHz)
350-390 MHz
380-430 MHz
806-870 MHz
410-470 MHz
- 60 dBc
MODEL INFORMATION & ACCESSORIES MTM800 Enhanced Mobile Terminal Installation Manual
Model Descriptions**
Model
Description
M1
Dash Mount with Mobile Terminal with Direct Mount Enhanced Control Head, Speaker, Microphone or
Handset, Standard User Guide, and Installation Accessories.
M2
Desk Mount with Mobile Terminal with Direct Mount Enhanced Control Head, Speaker, Microphone or
Handset, Standard User Guide, Installation Accessories and Tray with a Power Supply.
M3
Remote Mount with Mobile Terminal with Remote Mount Enhanced Control Head, optional either with
Remote Head Enhanced or Data Expansion Head Enhanced, Speaker, Microphone or Handset, Remote
Mount cables, Standard User Guide, and Installation Accessories.
M4
Motorcycle Mount with Mobile Terminal with Motorcycle Mount Enhanced Control Head, optional either with
Remote Head Enhanced or Data Expansion Head Enhanced, Speaker, Microphone or Handset, Motorcycle
cables, Standard User Guide, and Installation Accessories; Audio Accessories, Standard User Guide, and
Installation Accessories.
M5
Data Box - Remote Mount Configuration with Expansion Head Enhanced, without Enhanced Control Head,
Remote Mount cables, Standard User Guide, Installation Accessories, and a Power Supply.
**) Other combinations are not recommend or not possible.
23
24
MTM800 Enhanced Mobile Terminal Installation Manual
MODEL INFORMATION & ACCESSORIES
Accessories-to-Model Chart
ACCESSORIES
Control Heads
Part Number
M1
M2
M3
M4
Enhanced Control Head, English Keypad
GMWN4298
X
X
Enhanced Control Head, Chinese Keypad
GMWN4299
X
X
Enhanced Control Head, Korean Keypad
GMWN4300
X
X
Enhanced Control Head, Arabic Keypad
GMWN4301
X
X
Enhanced Control Head Bopomofo Keypad
GMWN4302
X
X
Enhanced Control Head Cyrillic Keypad
GMWN4303
X
X
Enhanced Control Head, English Keypad - Hungarian
GMWN4608
X
X
Remote Mount Enhanced Control Head, English Keypad
GMWN4304
X
X
Remote Mount Enhanced Control Head, Chinese Keypad
GMWN4305
X
Remote Mount Enhanced Control Head, Korean Keypad
GMWN4306
X
Remote Mount Enhanced Control Head, Arabic Keypad
GMWN4307
X
Remote Mount Enhanced Control Head, Bopomofo Keypad
GMWN4308
X
Remote Mount Enhanced Control Head, Cyrillic Keypad
GMWN4309
X
Remote Mount Enhanced Control Head, English Keypad Hungarian
GMWN4606
X
Motorcycle Mount Enhanced Control Head, English Keypad
GMWN4600
X
Motorcycle Mount Enhanced Control Head, Chinese Keypad
GMWN4601
X
Motorcycle Mount Enhanced Control Head, Korean Keypad
GMWN4602
X
Motorcycle Mount Enhanced Control Head, Arabic Keypad
GMWN4603
X
Motorcycle Mount Enhanced Control Head, Bopomofo Keypad
GMWN4604
X
Motorcycle Mount Enhanced Control Head, Cyrillic Keypad
GMWN4605
X
Motorcycle Mount Enhanced Control Head, English Keypad Hungarian
GMWN4607
X
Expansion & Remote Head Kits
Part Number
Data Expansion Head
PMLN4908
Remote Head
PMLN4904
Microphones
Part Number
M1
M2
M3
M4
M5
X
X
X
X
M1
M2
M3
M4
Desktop Microphone, Mobile Microphone Port
RMN5106
X
X
X
X
Compact Fist Microphone
RMN5107
X
X
X
X
Compact Fist, Mobile Microphone Port
RMN5052
X
X
X
X
Heavy Duty Fist Microphone, Mobile Microphone Port
RMN5053
X
X
Heavy Duty Fist Microphone
RMN5111
X
X
X
X
Fist Microphone
GMMN4063
Visor Microphone
GMMN4065
Loudspeakers
Small Loudspeaker, 5W
Part Number
GMSN4078
M5
M5
X
X
X
X
X
M1
M2
M3
M4
X
X
X
X
M5
MODEL INFORMATION & ACCESSORIES MTM800 Enhanced Mobile Terminal Installation Manual
25
ACCESSORIES
Speaker, 13W
GMSN4066
X
X
X
X
Speaker Extension Cable
GMKN4084
X
X
X
X
M1
M2
M3
M4
X
X
X
X
Handset
Part Number
Telephone-Style Handset 2
GMUN1006
Impress GCAI Handset 3
HLN7016
PTT Switches
Part Number
X
M1
M2
M3
M4
External PTT with Emergency Footswitch
RLN4836
X
X
X
X
Footswitch with Remote PTT
RLN4856
X
X
X
X
Pushbutton with Remote PTT
RLN4857
X
X
X
X
M1
M2
M3
M4
Desktop & Data Box Mount
Part Number
Power Cable (For Supply to Desktop Mobile)
GKN6266
X
Desktop Tray without Loudspeaker
GLN7318
X
Desktop Tray with Loudspeaker
GLN7326
X
Desktop Power Supply
GPN6145
X
Power Cable (For Desktop Power Supply GPN6145)
Part Number
M5
M1
M2
M5
M5
X
X
M3
M4
M5
US Linecord (3060665A04) Packed
NTN7373
X
X
Euro Linecord (3060665A05) Packed
NTN7374
X
X
UK Linecord (3002120F02) Packed
NTN7375
X
X
Argentina Linecord
NTN9246
X
Cables
Part Number
M1
M2
M3
M4
Remote Mount Cable (Terminal to C/H), 3m
RKN4077
X
X
Remote Mount Cable (Terminal to C/H), 5m
RKN4078
X
X
Remote Mount Cable (Terminal to C/H), 7m
RKN4079
X
X
Remote Mount Cable (Terminal to C/H), 10m
PMKN4020
X
X
Accessories Expansion Cable, 2.3m
PMKN4029
X
X
Motorcycle Mount TELCO Cable, 2.3m
PMKN4030
Accessories Expansion Cable, 4m
PMKN4056
Junction Box
Part Number
X
X
X
M1
M2
M3
M4
Junction Box
GMLN3002
X
X
X
X
Cable 6m Transceiver to Junction Box
GMKN4192
X
X
X
X
Cable 4m Transceiver to Junction Box
GMKN4193
X
X
X
X
Cable 2m Transceiver to Junction Box
GMKN4194
X
X
X
X
M1
M2
M3
M4
Power Cables (to Mobile Terminal)
Part Number
M5
12V Power Cable to Battery, 3m with Fuse (10 A)
GKN6270
X
X
X
12V Power Cable to Battery, 6m with Fuse (10 A)
GKN6274
X
X
X
Ignition Sense Cable, 3m with Fuse (4 A)
HKN9327
X
X
X
M5
M5
26
MTM800 Enhanced Mobile Terminal Installation Manual
MODEL INFORMATION & ACCESSORIES
ACCESSORIES
Installation
Part Number
M1
M2
M3
M4
M5
External Alarm Relay
GKN6272
X
X
X
X
Accessory Connector Kit
GMBN1021
X
X
X
X
Buzzer Kit
GLN7282
X
X
X
X
M1
M2
M3
M4
M5
Mounting (Transceiver)
Part Number
Key Lock Mount
RLN4779
X
X
X
X
X
High Profile Mounting Bracket
GLN7317
X
X
X
X
X
Low Profile Mounting Bracket
GLN7324
X
X
X
X
X
Mounting Frame to Install Transceiver in DIN-A Slot
PMLN5094
X
X
X
X
X
M1
M2
M3
M4
M5
Mounting (Control Head)
Part Number
Remote Mount Trunnion Kit
PMLN4912
Motorcycle Mount Trunnion Kit
PMLN5092
DIN Mount Bracket
PMLN5093
Programming/Data
Part Number
X
X
X
M1
M2
M3
M4
Programming Cable
GMKN4067
X
X
X
X
Active Data Cable
GMKN1022
X
X4
X
X
USB Programming Cable (Mobile Microphone Port)
HKN6184
X
X
X
X
I85 USB Data Cable with Inline Power
NNTN4007
X
X
X
X
M5
1) Keep the GCAI connector cover supplied with the new Control Head.
2) Requires Junction Box, GMLN3002.
3) The GCAI handset is only approved for Remote and Motorcycle installations used with Toroid EMC Suppression kit
(P/N: 01015001001). The handset is certified to 350–390 MHz and 380–430 MHz frequency ranges only. The handset is not
certified for 410–470 MHz and 806–870 MHz with any installation type.
4) The cable, GMKN1022, is only compatible when an Data Expansion Head Enhanced is not fitted as part of a remote mount
configuration. In this configuration access to the Tetra PEI for IP Packet Data and SDS services is available on the Data
Expansion Head Enhanced and the Active Data Cable GMKN1022 is not required.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
27
INSTALLATION
Introduction
General Information
This product must be installed in a vehicle in accordance
with the vehicle manufacturer’s guidelines and the
instruction detailed in this manual.
Only the specified Motorola parts in this manual should be
used. Failure to do so could result in non compliance to
the Automotive Directive (72/245/EEC, as amended by
95/54/EC).
For products fitted to two and three wheeled vehicles,
Directive 97/24/EC applies.
This Terminal is only designed and certified to be used for
terrestrial use only.
There are two methods of installing the mobile terminal in a vehicle:
1.
Using the direct mounting trunnion and power cables supplied with a standard radio package.
2.
Remote mounted in the car radio cut-out (using the required DIN mounting kit PMLN5094),
per ISO7736.
An accessory connector on the rear of the terminal enables you to attach different accessories (see
section “Accessory Connection Plan”).
A mobile microphone port on the front control head panel (see page 66) provides for the connection
of various types of microphones (Desktop Microphone RMN5106, fist microphone RMN5053).
This terminal is ONLY made for 12 V power supply
connection. In vehicles with 24 V power supply, a DC/DC
converter is required.
Please be aware when planning the installation that there
is a current consumption of approx. 3.5 A during PTT and
up to 30 mA when terminal is switched off.
1.
Mount the terminal horizontally near the driver, so the driver can easily view, access and
operate the controls and accessories.
2.
Ensure that the location is not exposed to dirt and moisture.
3.
Verify that there will be sufficient space around the mobile unit for air flow and installation.
4.
Check that there is enough routing space for the power cable connector and the antenna
coaxial cable.
5.
Plan the best place to run connections to minimize pinching, crushing, and overheating of
wires and cables.
28
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
In a vehicle with an airbag, make sure that the mounting
location of the mobile terminal, or of any terminal
accessory, is not in the deployment path of the air bag.
Uninstaling the radio
OPTION 1:
Before disconnecting the 13.2 V main power supply from
the radio:
1. Switch off the radio.
2. Wait for a minimum of 4 seconds after the radio switch
is released.
3. Disconnect the 13.2 V main power supply.
OPTION 2:
Turn off the main power supply WITHOUT switching OFF
the radio.
DC Power Cable Installation
Installation Planning
This terminal must be operated only in negative ground
electrical systems. Operating the terminal on a positive
ground system will cause the cable fuse to short-circuit.
Check the vehicle ground polarity before you begin the
installation.
The 3-meter (10-foot) DC power cable shipped with the terminal should be long enough to be
installed in most vehicles. Take the following precautions before you begin:
1.
Whenever possible, avoid routing the cable above the catalytic converter.
2.
Make sure that the power cable never rests on sharp edges.
3.
Use grommets whenever a cable has to pass through a hole in a metal panel.
The following table lists power cables available for this terminal:
Table 1 DC Power Cables
Number
Description
Rating
GKN6270
Power Cable to battery with fuse 10 A
12V Power Cable to Battery, Length: 3 m
GKN6274
Power Cable to battery with fuse 10 A
12V Power Cable to Battery, Length: 6 m
HKN9327 *
Ignition Sense Cable with fuse 4 A
Ignition Sense Cable, Length: 3 m
6500139767
Fuse 10 A for Power Cable
6580283E02 *
Fuse 4 A for Ignition Sense Cable
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
29
* For more information refer to section “Ignition Sense Cable Installation”. The Ignition Sense Cable
allows the terminal to be turned on and off by the vehicle ignition switch.
In cases of blown fuses, replace ONLY with those of
identical value.
NEVER insert ones of different values.
Installation Procedure
Begin the DC power cable installation as follows:
1.
Determine a routing plan, keeping in mind where the terminal is to be mounted and make
sure that the cable does not rest on sharp edges.
Improper handling with the power cable may cause
shorting to ground. Ensure that during terminal
installation the power cable fuse is removed.
Make sure your power cable is not placed with the
antenna in parallel. Interference can cause radio to hang.
2.
Locate an existing hole with grommet in the vehicle fire wall, or use a 9.5 mm (3/8-inch) bit to
drill an access hole in the fire wall. Install a grommet with a 5 mm (3/16-inch) inside diameter
into the hole to protect the power cable.
Be very careful not to damage existing wires.
3.
From inside the vehicle, feed the red and black leads (without the lugs attached) through the
access hole and into the engine compartment. (see Figure 1)
Black Lead
Firewall
Red Lead
Grommet
Engine Compartment
Figure 1 Power Cable Routing into the Engine Compartment
4.
Connect the black lead of the DC power cable to the nearest vehicle chassis ground point
(using the provided ring lug if necessary). Shorten the black lead to remove any excess cable.
(see Figure 2).
30
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Locate a good vehicle ground point. The vehicle frame
provides the best ground. Optimum terminal performance
can only be achieved with a very low resistance ground
connection. Verify that the connections between the
battery negative terminal, vehicle chassis, and engine
block have low resistance.
Fuse
(10 A)
Fuse Holder
Adapter
Cover
Red Lead
Red Lead
(min. 2.5 mm2)
Mounting Hole
Red Lead
(min. 2.5 mm2)
Ring Lugs
Black Lead
(min. 2.5 mm2)
To Battery or Chassis
To Battery +
Figure 2 Power Cable Assembly
5.
Place the fuse holder close to the battery. Ensure that it is not near any hot engine
component. Mount the fuse holder using its mounting hole and dress the wires as required.
6.
Insert the stripped end of the red lead of the fuse holder into the ring lug hole and crimp it.
Connect the fuse holder red adapter lead plug to the mating receptacle on the red lead of the
power cable.
7.
Connect the red lead ring lug from the fuse holder to the positive (+) battery terminal. Make
sure the adapter cable is connected to the main power cable red lead.
8.
Carefully check that all connections are proper. Insert the fuse into the fuse holder and close
the cover.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
31
Ignition Sense Cable Installation
Table 2 Ignition Sense Cable
Number
Description
HKN9327
Ignition Sense Cable with fuse 4 A
6580283E02
Fuse 4 A for Ignition Sense Cable
Rating
Ignition Sense Cable, Length: 3 m
The HKN9327 Ignition Sense Cable allows the terminal to be turned on and off by the vehicle
ignition switch.
The ignition sense cable kit contains a thin cable and a fuse holder. To install the cable, carry out the
following steps.
In cases of blown fuses, replace ONLY with those of
identical value.
NEVER insert ones of different values.
Ensure that the fuse is removed during cable installation.
1.
Plug the lead of the Ignition Sense Cable with the crimped on terminal into #10 socket of the
accessory plug.
2.
Route and secure the cable with attached tie wrap.
3.
Connect the other lead of the accessory cable to the ignition switch of the vehicle.
4.
Insert the fuse into the fuse holder and close the cover.
1
2
15
10
16
Figure 3 Accessory Connector with Ignition Sense Cable
If the ignition line is not used, it needs to be grounded.
Interference can cause radio to hang.
32
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Terminal Installation
Enhanced Control Head Installation
The Enhanced Control Head can be removed from the housing and turned to any position within a
180° radius. This provides multiple mounting options for the terminal. For example, the terminal may
be mounted on either side of the vehicle to facilitate the safest and most ergonomically ideal
position. The Enhanced Control Head may then be turned to provide the most convenient access.
To reposition the Enhanced Control Head:
1.
Insert the Dismantling tool (Motorola P/N 6686119B01) in the groove between the Enhanced
Control Head and the terminal assembly as shown in the figure below.
2.
Press on the dismantling tool until the snap connectors on the side of the Enhanced Control
Head release from the terminal assembly.
3.
Pull the Enhanced Control Head away from the terminal assembly.
Dismantling
Tool
ZWG0130209-O
Figure 4 Typical Control Head Removal
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
33
Trunnion Installation
Installation Planning
The trunnion allows the terminal to be mounted to a variety of surfaces.
1.
The trunnion must be securely fixed to the vehicle chassis.
2.
Ensure the surface can support the weight of the terminal.
3.
Although the trunnion can be mounted to a plastic dashboard, it is recommended that the
mounting screws be located so they penetrate the supporting metal frame of the dashboard.
2x Wingscrews
0305760W02
Figure 5 Terminal into High Profile Trunnion (GLN7317)
Figure 6 Terminal into Key Locked Mount Trunnion (RLN4779A)
34
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Installation Procedure
1.
Select either the transmission hump or an open underneath portion of the dash to mount your
terminal (see Figure 7). When mounting the trunnion on the transmission hump, be careful
that the transmission housing is not affected.
2.
Use the trunnion mounting bracket as a template, to mark the hole positions on the mounting
surface. Use the innermost three holes for a curved mounting surface, such as the
transmission hump, and the three outermost holes for a flat surface such as under the dash.
3.
Centre-punch the spots you marked and use a 4 mm (5/32-inch) bit to drill a hole at each
location.
4.
Secure the trunnion mounting bracket to the mounting surface with the three self-tapping
screws provided. (See Figure 7.)
5.
Slide the terminal into the trunnion. Secure the terminal with the two wing screws provided.
The keypad labelling of the control head may vary
according to the specific customer/country concerns.
TRANSMISSION HUMP MOUNTING
Wing Screw
(2)
Tab
Tab
Mounting
Surface
Trunnion Mounting
Bracket
Tab
28 mm
(1.12")
46 mm
(1.84")
73 mm
(2.92")
46 mm
(1.84")
73 mm
(2.92")
BELOW DASH MOUNTING
Mounting Surface
Sheet Metal
Screws
Wing Screw
(2)
Figure 7 Transmission Hump Mounting (Top) and Below Dash Mounting (Bottom)
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
35
Dashboard Installation
Installing the Radio in an Automotive Dashboard
1.
Open out the radio cut-out in the dashboard.
2.
Remove the top plastic cover off the radio.
3.
Insert the mounting frame into the cut-out and retain it by bending back the relevant fixing
tabs, using all 6 where possible, to hold it in place.
The tabs are easily bent back by twisting a large flatbladed screwdriver into the slot behind the tabs.
For a more secure installation the top and rear of the
frame should also be secured with screws.
The demount tool can be used as an aid to mounting as
well as demounting.
Mounting the Radio in the Frame
1.
Provide the electrical connections to the radio for power, antenna and accessories.
2.
Plug in all the connectors and push the radio with its Remote Head Enhanced, or alternatively
the Data Expansion Head Enhanced, firmly onto the mounting frame until the two springs
snap into place.
The fixing tabs should be checked for tightness each time
the radio is removed. The tabs are easily tightened by
twisting a large flat-bladed screwdriver in the slot behind
the tabs.The frame is not designed for daily mounting and
demounting.
36
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
1
Figure 8 Mounting the Radio into the Frame (Shown with Enhanced Control Head)
Table 3 DIN Mount Kit Components
Item
1
Description
Part Number
DIN Mount Kit
PMLN5094
Demount Tool
8166514A01
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
Remove the Radio from the Frame
1.
Remove both rubber side caps from the Enhanced Control Head.
2.
Insert the demount tool into the two openings as shown in Figure 9 below.
Figure 9 Removing the Radio from the Frame
3.
Push the demount tools through the openings in the frame.
4.
Slide out the radio.
37
38
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Desktop Installation
The MTM800 Enhanced may be desktop mounted. The Desktop Station option provides the
terminal with the desk microphone, power supply, desk top tray (without speaker) and external
loudspeaker.
If an outdoor antenna is used a proper grounded Lightning
Protector with Quarter-Wave Shorting Stub must be
inserted between the outdoor antenna and the transceiver
antenna input. The line voltage power supply shall have a
proper ground connection (refer to IEC61312-1). The
installation must meet the requirements of any and all
applicable local codes and regulations.
Planning
Planning is the key to fast, easy terminal installation. Before a hole is drilled or a wire is run, inspect
the location and determine how and where you intend to mount the antenna, terminal and
accessories. Plan wire and cable runs to provide maximum protection from pinching, crushing, and
overheating. The installation planning should only be undertaken by persons who are competent
and able to ensure that the complete installation fulfils its regulatory requirements, such as EMC
(Electro Magnetic Compatibility) and IEC (International Electrotechnical Commission).
Installation
1.
Be sure line voltage power is available.
2.
Make sure sufficient air can flow around the terminal to permit adequate cooling.
3.
Choose a flat surface for the desktop tray and external loudspeaker.
4.
Be sure the mounting surface is able to adequately support the weight of the terminal and
tray.
5.
If an outdoor antenna is used choose a location for the terminal as close as possible to the
antenna cable inlet of the building. Make sure that the installation of the surge protector is in
accordance with the manufacturer’s specifications and safety hints. The line voltage power
supply shall be grounded properly.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
39
Wall
Outlet
Line Cord
with Ground
Power Supply
12 V Desktop
Power Cable
Outdoor Antenna
Lightning Protector
with Quarter-Wave
Shorting Stub
Speaker
Desk
Microphone
CCCCCCCC
CCCC
CCCC
CCCCCCC
CCC
or
Antenna
Cable
Indoor Antenna
Antenna Connector BNC
C
CCCCC
CCC
CC
CCC
CCC
CC
CCC
CC
Radio in
Desktop Tray
Figure 10 Desktop Mounting (See Table 4 for Part Numbers)
Table 4 Associated Components
Item
Description
Part Number
1
Desktop Microphone
RMN5106
2
External Speaker 13 W
GMSN4066
3
Small Loudspeaker 5 W
GMSN4078
4
Desktop Tray w/o speaker
GLN7318
5
12 V Desktop Power Cable
GKN6266
6
Power Supply Unit PSU
GPN6145
7
110 V PSU Line Cord US
NTN7373R
8
230 V PSU Line Cord Euro
NTN7374R
9
240 V PSU Line Cord UK
NTN7375R
10
220 V PSU Line Cord Argentina
11
Lightning Protector with Quarter-Wave Stub Protector in the appropriate frequency range
®
(for example, HUBER+SUHNER : type 3400.17.0389 (UHF) or type 3400.17.0277
(800 MHz)
NTN9246
5W speaker (GMSN4078B) cannot sustain the maximum
audio output power of 13 W coming from the radio when
the volume is set to the maximum in Loudspeaker Volume
Max code plug. This causes the speaker cone to dislocate.
40
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Remote Mount Installation
Remote Mount Cable
Transceiver
Toroid
10x
10-Pin
Connector
10-Pin
Connector
Flex
Remote Head
Enhanced
or
Data Expansion
Head Enhanced
Remote Mount Enhanced
Control Head
Toroid
10x
Figure 11 Remote Mount Installation with Remote Head Enhanced/Data Expansion Head Enhanced
Table 5 Associated Components for Remote Mount
Item
Description
Part Number
1
Remote Mount Cable, 3 m
RKN4077
2
Remote Mount Cable, 5 m
RKN4078
3
Remote Mount Cable, 5 m
RKN4079
4
Remote Mount Cable, 10 m
PMKN4020
5
Speaker Extension Cable
GMKN4084
6
Remote Head Enhanced
PMLN4904
7
Data Expansion Head Enhanced
PMLN4908
8
Toroid EMC Suppression Kit
01015001001
The Remote Mount Cable have to be wound 10 times
around each toroid.
Each toroid have to be placed 30.0±2.5 cm respectively
from the expansion head and the control head.
Winding at both ends reduces the effective cable length
approximately by 0.8 m.
Fix the toroids firmly to a stable surface once the Remote
Mount Cable is connected.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
41
Installing the Remote Mount Enhanced Control Head onto the Remote Mount
Trunnion
1.
Slide the Remote Mount Enhanced Control Head onto the mounting trunnion until it snaps
into place.
2.
Tighten the screws at both sides of the trunnion. After a few turns, tilt the control head for an
optimum view of the display. Then, complete the tightening of the screws.
1
1
.
+/-0
5
5
1
31
3m
m
2
mm
Figure 12 Remote Mount Enhanced Control Head Installation with Remote Mount Trunnion
Table 6 Remote Mount Enhanced Control Head Installation with Remote Mount Trunnion
- Mechanical Parts List for Installation
Item
1&2
Description
Remote Mount Trunnion Kit
Part Number
PMLN4912
42
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket
1.
Slide the Remote Mount Enhanced Control Head onto the DIN Mount Bracket until it snaps
into place.
2.
Tighten the screws at both sides of the DIN Mount Bracket.
5
15
2
76.5
+/
15
0.
m
m
1
mm
Figure 13 Remote Mount Enhanced Control Head Installation with DIN Mount Bracket
Table 7 Remote Mount Enhanced Control Head Installation with DIN Mount Bracket
- Mechanical Parts List for Installation
Item
Description
Part Number
1&2
DIN Mount Bracket Kit
PMLN5093
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
43
Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into
the DIN Frame
1.
Insert the mounting frame into the DIN Mount Bracket and retain it by bending back the
relevant fixing tabs. Use all 6 tabs, if necessary, to hold it in place.
The tabs are easily bent back by twisting a large flatbladed screwdriver into the slot behind the tabs.
For a more secure installation the top and rear of the
frame should also be secured with screws.
The demount tool can be used as an aid to mounting as
well as demounting.
Figure 14 Mounting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame
44
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Adding Extra Connectivity to the Remote Head
The Accessories Expansion Cable (PMKN4029/PMKN4056) allows users to have extra connectivity
to accessories via the Mobile Microphone Port (MMP) and USB port.
Accessories Expansion Cable (PMKN4029/PMKN4056)
Mobile Microphone Port/USB Port Module
Figure 15 The Accessories Expansion Cable with the Mobile Microphone Port (MMP)/USB Port Module
Installing the Accessories Expansion Cable
1.
Plug in the Accessories Expansion Cable to the subD Port of the Remote Mount Enhanced
Control Head.
2.
Tighten the screws at the subD connector to secure the Accessories Expansion Cable in
place.
3.
The Mobile Microphone Port (MMP)/USB port module can be mounted to a variety of
surfaces. Tighten the two screws at both sides of the module to fix it securely in place.
* For more information on the connector pin functions of the Accessories Expansion Cable and the
Mobile Microphone Port (MMP)/USB Port Module, please see Table 17 on page 70.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
45
Motorcycle Mount Enhanced Control Head Installation
Figure 16 Motorcycle Mount Enhanced Control Head - Front Side
The keypad labelling of the control head may vary
according to the specific customer/country concerns.
Planning
Planning is the key to fast, easy radio installation. Before a hole is drilled or a wire is run, inspect the
vehicle and determine how and where you intend to mount the antenna, radio, and accessories.
Plan wire and cable runs to provide maximum protection from pinching, crushing, and overheating.
The installation planning should only be undertaken by persons who are competent and able to
ensure that the complete installation fulfils its regulatory requirements, such as EMC
(ElectroMagnetic Compatibility).
The following list of considerations should, as a minimum, be checked during installation planning:
1.
The recommended place for the transceiver is to place it in the box at the back of the
motorcycle.
2.
Mount the Motorcycle Mount Enhanced Control Head horizontally at a position which enables
the driver to view the controls and operate them easily.
3.
Be sure the Motorcycle Mount Enhanced Control Head is close enough to the vehicle
operator to permit easy access to operating controls.
4.
It is recommended to mount the Motorcycle Mount Enhanced Control Head directly on the
chassis or handle part.
5.
Ensure that the units mounted in the motorcycle box are protected from dirt and moisture.
6.
Verify that there is sufficient space around the units to allow air flow and removal.
7.
Verify that the cable from a handlebars mounted Motorcycle Mount Enhanced Control Head
and to the radio unit is long enough to allow for the handles to be turned.
8.
Verify that the antenna cable is routed in the shortest way to minimize power loss over the
cable.
9.
Check that the mounting surfaces are able to support the weight of the units.
46
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
If an additional GPS antenna or a combined TETRA/GPS
antenna is used, the antenna housing carries the GPS
receiver. Take care not to cover the antenna housing with
metal or other radio wave absorbing material.
MOTOCYCLE MOUNT ENHANCED CONTROL HEAD
TRANSCEIVER-TO-CONTROL HEAD CABLE
P/N: PMKN4030
TRANSCEIVER
LOUDSPEAKER
FIST MICROPHONE CABLE
P/N: GMKN4072
BATTERY
FUSE
BLOCK
FIST MICROPHONE
MOTORCYCLE BOX
ANTENNA
IGNITION SENSE CABLE
P/N: HKN9327 (3m, FUSE 4A)
CHASSIS GROUND
FUSED POWER CABLE
P/N: GKN6270 (3m, FUSE 10A)
Figure 17 Motorcycle Installation
Installing the Motorcycle Mount Enhanced Control Head
1.
Slide the Motorcycle Mount Enhanced Control Head onto the mounting trunnion until it snaps
into place.
2.
Tighten the screws at both sides of the trunnion. After a few turns, tilt the Motorcycle Mount
Enhanced Control Head for an optimum view of the display. Then, complete the tightening of
the screws.
3.
There are two ways to mount the motorcycle trunnion, each limited to a 77 degree of
allowable movement, as shown in Figure 18 and Figure 19:
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
Figure 18 Upward Movement
Figure 19 Downward Movement
47
48
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Mechanical Parts
1
2
2
+/-0
155
33
mm
.1 m
m
3
Figure 20 Motorcycle Mount Enhanced Control Head Mounted in a Trunnion
Table 8 Motorcycle Mount Enhanced Control Head - Mechanical Parts List for Installation
Item
Description
Part Number
1
Motorcycle Mount TELCO Cable
PMKN4030
2&3
Motorcycle Trunnion Kit
PMLN5092
Installation of the Motorcycle Mount TELCO Cable (PMKN4030)
1.
Plug the TELCO connector to the TELCO socket of the Remote Head Enhanced/Data
Expansion Head Enhanced connected to the transceiver.
2.
Plug the other side of TELCO connector to the TELCO socket of Motorcycle Mount Enhanced
Control Head.
Adding Extra Connectivity to the Motorcycle Mount Enhanced Control Head
Please see “Adding Extra Connectivity to the Remote Head” on page 44 for more information on
adding extra connectivity using the Accessories Expansion Cable and the Mobile Microphone Port
(MMP)/USB Port module.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
49
Data Expansion Head Enhanced Installation
Data Expansion Head Enhanced Radio without Control Head
The Data Expansion Head Enhanced can be used without a control head.
This configuration allows the use of the radio without any control head, allowing the radio to be
powered on via the ignition switch.
The packet data/SDS via the AT commands are available from the 9-pin subD connector (PEI).
The Remote PTT can be connected via the 20-pin rear connector. Only one talkgroup is available,
and that talkgroup is the first one on the CPS list.
50
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Data Expansion Head Enhanced with 3rd Party Control Head
The Data Expansion Head Enhanced can be used with a “virtual head” on a PC or a third party
control head.
This configuration allows the controlling of the radio (Transceiver Box) with a Control Terminal (for
example: Personal Computer, Laptop, Console, and so forth). In this configuration, the Control
Terminal is a substitute for the Enhanced Control Head. The Control Terminal is connected to the
25-pin socket of the Data Expansion Head Enhanced via the GMKN4079 cable (see section
“Connecting Cables” on page 69 for more information).
Cable: GMKN4079
25-Pin subD
Connector
(female)
9-Pin subD
Connector
(female)
Data Expansion
Head Enhanced
SB9600
Interface
Top view to the chassis
TELCO
Connector
(10-Pin)
MTM800 Enhanced
Transceiver
Box
Accessory
Connector (20-Pin
FME GPS Conn.
Power Connector
BNC Antenna
Connector
8-Wire RS232 Interface
RS232
Interface
RS232
Interface
Data
Terminal
Control
Terminal
Figure 21 Configuration with Remote Control Terminal and Data Terminal
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
Data Box Radio
This configuration allows the controlling of the radio (Transceiver Box) via PEI (for example:
Personal Computer, Laptop, Console, and so forth) with AT Commands (recommended) or TNP1
protocol from a Control Terminal.
In this configuration, the Data Terminal is a substitute for the Enhanced Control Head. The Data
Terminal is connected to either the 9-pin socket of the Data Expansion Head Enhanced via the
RS232 cable or to the 20-pin accessory connector via the active data cable (see section
“Connecting Cables” on page 69 for more information).
Top view to the chassis
Data Expansion
Head Enhanced
TELCO
Connector
(10-Pin)
25-Pin subD
Connector
(female)
9-Pin subD
Connector
(female)
DB9-DB9
RS232
Cable
Data
Terminal
OR
MTM800 Enhanced
Transceiver
Box
Accessory
Connector (20-Pin)
Power Connector
BNC Antenna
Connector
Data
Terminal
Active Data Cable
GMKN1022
Figure 22 Data Box Radio Configuration
51
52
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Junction Box Installation
Speaker
to MTM800 Enhanced
accessory connector
External PTT
To Ignition
switch
Visor microphone
GMMN4065
F2 4A
Connecting cable
GMKN4192/3/4
External
alarm
Emergency
switch
Fist Microphone GMMN4063 or
Telephone style handset GMUN1006
Junction Box
GMNL3002
Accessory
Connector Kit
GMBN1021
Programming Cable
FLN9636
CPS
Standard
RS232 cable
Laptop
Laptop
Figure 23 Remote Mount Installation with Junction Box
General
The junction box (GMLN3002) assists the easy installation for dash and remote mount
configurations. It furthermore provides access to the radio for flashing and keyloading of Universal
Crypto Module (UCM) encryption keys.
The junction box enables the customer adding a laptop to the remote configuration, connecting a
visor microphone, various accessories or fist microphone.
Installation
The junction box can be installed horizontally and vertically. Secure the junction box by screwing the
four supplied screws straight into the location as shown in the figure below. Use the connecting
cable (1) for installation purposes.
Ingress Protection (IP) Code: IP30
The junction box has no connector sealing and is designed for use in dust and water protected
location only.
1.
Secure the junction box (GMLN3002) with the four screws supplied with kit.
2.
Connect the connection cable GMKN4192 (length = 6 m), GMKN4193 (length = 4 m) or
GMKN4194 (length = 2 m) from the junction box to the accessory connector on the rear side
of the transceiver and fasten it with the plug-screws.
The cable which will be used for installation purposes only must be ordered separately.
3.
All other devices should be adapted as shown in Figure 23.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
53
Service
The junction box PCB is not repairable. Please order a new junction box as necessary.
Connections
1.
Connect all accessories to the junction box.
2.
Connect the mobile-terminal-to-Junction box cable to the junction box.
3.
Connect the programming cable to the junction box (if required).
1 = Connecting cable from Junction Box
to MTM800 Enhanced (rear side
accessory connector) for installation
purpose only.
GMKN4192 (length 6 m)
GMKN4193 (length 4 m)
GMKN4194 (length 2 m)
7 6 5
4 3 21
3
2
7 6 5
4 3 2
1
7 6 5
432 1
1
2 = Connector for accessory terminal
pin 1 SPEAKER +
pin 2 SPEAKER pin 3 EXT_PTT
pin 4 IGNITION SENSE
pin 5 EXT_ALARM
pin 6 EMERGENCY
pin 7 GND
3 = Connector for visor microphone
Figure 24 Connectors on the Junction Box - Front Panel
PIN 4: Use an adapter between the radio and the
accessory connector to short the ignition to ground.
Interference can cause radio to hang.
54
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
4 = Connector for programming
cable FLN 9636
5 = Connector for accessory
connector kit GMBN1021
6 = Connector for adapting a
laptop via RS232 cable
7
6
5
7 = TELCO-connector for fist
microphone (GMMN4063) or
telephone style handset
(GMUN1006)
4
Figure 25 Connectors on the Junction Box - Rear Panel
Connection Plan for the Junction Box Accessory Terminal
Connection Plan for the Speaker
1
2
External
Speaker
1
2
3
4
5
6
7
JUNCTION BOX TERMINAL
SPEAKER
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
55
Connection Plan for the Alarm Relay
BUZZER
BLK
5
RED +12V
ALTERNATIVE
1 2
3
4
External
alarm
5
6
5
BLK
7
+12 V
JUNCTION BOX TERMINAL
ALTERNATIVE
5
+12 V
RED
86
87
85
30
RED
ALARM
RELAY
RED
BLK
+12 V
+12 V
BLK
86
87
85
30
RED
ALARM
RELAY
+12 V
BLK
Connection Plan for the Emergency Switch
1
2
3
4
5
6
EMERGENCY
SWITCH
7
JUNCTION BOX TERMINAL
Connection Plan for the Ignition Sense Cable
TO
IGNITION
SWITCH
4A
1
2
3
4
5 6
7
IGNITION
SENSE
CABLE
SWITCHED BATTERY VOLTAGE
JUNCTION BOX TERMINAL
The ignition sense cable HKN9327 allows the MTM800 Enhanced to be turned on and off by the
vehicle ignition switch.
56
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
To install the cable, carry out the following steps.
1.
Connect the stripped lead of the fuse holder cable only to an ignition switched terminal of the
fuse block. Use the supplied terminal or any other suitable terminal.
2.
Mount the fuse holder using the mounting hole, and dress wires as required.
3.
Cut the thin cable to the required length, crimp the supplied red lead to the stripped lead of the
thin cable, and connect it to the blue terminal of the fuse holder cable.
4.
Connect the other end of the ignition sense thin cable to pin 4 of the junction box terminal.
5.
Insert the provided fuse into the fuse holder and close the cover.
PIN 4: If the ignition line is not used, it needs to be
grounded. Interference can cause radio to hang.
Connection Plan for External PTT
7
version a)
3
1
2
3
4
5
3
6
7
JUNCTION BOX TERMINAL
version b)
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
57
Connection Plan for Accessory Connector Kit (GMBN1021)
Part Number/Description
Cable Connectivity
GMSN4066 Speaker 13W
GMSN4078 Speaker 5W
SPKR- 1
SPKR+ 16
GMMN4065 Visor Microphone
Cannot be used if connector 7 (TELCO) is in use.
MIC 2
GND 7
RLN4856 Footswitch PTT
RLN4857 Push button PTT
RLN4858 Gooseneck PTT
These accessories can be used for PTT or
Emergency function.
PTT 3/
Emergency 9
GND 8
RLN4836 Tri-State Emergency Footswitch and
Cable
12k
Emergency 9
GND 8
HKN9327 Ignition Sense Cable
4A
+12V
Ignition 10
Car
Ignition Switch
GMKN4084 Speaker Extension Cable
5m
1
16
GKN6272 External Alarm
Relay and Cable
+12V (alternative)
+12V
SWB+ 13
86
87
85
30
86
87
85
30
+12V
+12V
Ext. Alarm 4
Ext. Alarm 4
GLN7282 Buzzer
Ext. Alarm
4
SWB+ 13
HKN9327 Ignition Sense Cable: If the ignition line is not
used, it needs to be grounded. Interference can cause
radio to hang.
Radios with Data Expansion Head Enhanced
To use a junction box with one of the MTM800 Enhanced mobile terminals fitted with a Data
Expansion Head Enhanced, always use the 9-pin RS232 port on the Data Expansion Head
Enhanced for PEI instead of the 9-pin RS232 port on the junction box (connector 6). Ensure to fit a
jumper between pins 6 and 15 of the Junction Box (connector 5) for the PEI to operate correctly in
this configuration.
58
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Standard Radios without Data Expansion Head Enhanced
For standard MTM800 Enhanced mobile terminals without a Data Expansion Head Enhanced, the
jumper between pins 6 and 15 of the junction box (connector 5) should be removed.
Table 9 Jumper on Accessory Connector
MTM800 Enhanced Mobile Terminal
Fit Jumper Pins 6-15?
Use Junction Box RS232 PEI?
With Data Expansion Head Enhanced
Yes
No
Use the Data Expansion Head
Enhanced 9-pin PEI instead.
Without Data Expansion Head Enhanced
No
Yes
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
59
Connectors and Pin Assignment of the Radio
Transceiver Rear Side - Pin Function
20
2
4
19
1
3
6
8
10
12
14
16
18
5
7
9
11
13
15
17
Accessory Connector
*Note the location of Pin 1
Figure 26 Location of Accessory Connector - Rear Side
This section gives a description of the Accessory Connector pin functions.
The accessory connections shown are not compatible to
some other models of Motorola radios. Check the
appropriate accessory or technical manual for further
information.
Table 10 20-Pin Accessory Connector
Pin
Function
Description
1
EXTERNAL
SPEAKER -
Speaker - and Speaker + (Pin 16) are used to connect an external speaker. The audio
PA is a bridge amplifier with a minimum load resistance of 3.2 ohms.
2
EXTERNAL MIC
AUDIO
External-, Emergency-, or Hot-Microphone; depends on CPS programming. This
microphone signal is independent of the microphone signal on the microphone
connector. The DC impedance is 660 ohms and the AC impedance is 560 ohms.
3
EXTERNAL PTT
This is a digital input to trigger external PTT; active low; non active high
4
EXTERNAL ALARM
This is a digital output for External Alarm/Fault Indication; active low; open collector
with 4k7 Ohms pull up to B+.
5
TX_AUDIO
This input is intended for injecting signals into the transmit path. Input impedance > 10
k Ohms;
Input level = 775mVRMS
6
KEYFAIL/FLASH
This line supports the encryption module and the flash mode.
Service Aids: 12 volts at this pin during power up/on brings the radio into the flash
mode.
7
ANALOG GROUND
Analogue Ground (the same as pin 8)
8
DIGITAL_GROUND
Digital Ground (the same as pin 7)
9
EMERGENCY
To activate this functionality the pin has to be connected to ground. This will turn on the
radio.
10
IGNITION
Connecting this pin to the ignition line of the vehicle that will automatically turn on the
radio if ignition of the vehicle is turned on. High active.
60
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Table 10 20-Pin Accessory Connector
Pin
Function
Description
11
RX_AUDIO
This is the received RX signal. Output impedance approximate 600 Ohms;
unsymmetrical;
Output level = 775mVRMS
12
AUDIO_PA_ENABLE
This is a digital input. High level or pin enables the audio PA. Low level disables the
audio PA.
13
SWB +
This voltage is available when the radio is switched on.
The max. current is 1.0A w/o GPS board and 0.8A with GPS board mounted.
14
HOOK
This is a high active digital input.
Low = On hook; High = Off hook
15*
SCI_DTR
Data Terminal Ready, used for clock input for high speed flashing.
Reserved for Service Aids.
16
SPEAKER +
Positive output of radio's audio PA (see Pin 1).
17*
SCI_CTS
Radio OUTPUT: Clear To Send.
Reserved for Service Aids
18*
SCI_RTS
Radio INPUT: Request To Send.
Reserved for Service Aids
19*
SCI_RXD
Radio OUTPUT: Receive Data.
Reserved for Service Aids
20*
SCI_TXD
Radio INPUT: Transmit Data.
Reserved for Service Aids
The 4-wire 3 Volts SCI interface on the accessory
connector (pins 17 -20) can only be used for flashing of
radio firmware and programming software features. It can
NOT be used for communication during normal radio
operation.
PIN 10: If the ignition line is not used, it needs to be
grounded for example connected to pin 7 or 8.
Interference can cause radio to hang.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
61
Accessory Connection Plan
The accessory connections shown are not compatible to
some other models of Motorola radios. Check the
appropriate accessory or technical manual for further
information. Ensure correct position of the accessory
connector.
20
2
4
19
1
3
6
8
10
12
14
16
18
5
7
9
11
13
15
17
Accessory Connector
*Note the location of Pin 1
16-pin Accessory Connector
The 16-pin connector, Part Number: 1580922V01 (delivered with the
accessory connector kit, Part Number: GMBN1021) plugs into the centre
of the 20-pin accessory connector. The four outside pins are not
connected, see grey square at figure above.
1
2
15
(Alternatively, a 20-pin connector can be used as well, Part Number: 1586184B01).
1
16
GMSN4066
Speaker 13W
GMSN4078
Speaker 5W
GMMN4065
GMMN1033
Visor Microphone
Visor Mic, omni directional
16
GMBN1021 Accessory connector kit containing:
Seal, Part No 3202606Y02
Accessory Connector Housing 16-Pin, Part No 1580922V01
Crimp Contact, Part No 2984249N01
GKN6272
MIC 2
GND 7
RLN4856
RLN4857
RLN4858
PTT 3
GND 8
External Alarm, Relay and Cable
+12V
Footswitch
Pushbutton w/Remote PTT
Gooseneck PTT
86
87
85
30
+12V
Ext. Alarm 4
12k
RLN4836
Tri-state Emergency
Footswitch and Cable
Emergency 9
+12V
SWB+ 13
GND 8
86
87
85
30
+12V
HKN9327
Ignition Sense Cable
4A
Ignition 10
+12V
Car
Ignition Switch
Ext. Alarm 4
GMKN4084
1
1
16
16
Speaker Extension Cable
GLN7282
Buzzer
4
13
DO NOT short pin 16 or pin 1 on the accessory connector
to ground; this may damage the radio.
If the ignition line is not used, it needs to be grounded.
Interference can cause radio to hang.
62
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Connectors and Pin Assignment of Data Expansion Head
Enhanced and Remote Head Enhanced
Front View
CAUTION:
NOT a Microphone Connector
1 2 3
4 5
6
7
8 9 10
1
13
25
14
J302
10-Pin TELCO
Connector
25-Pin subD
Connector
1
5
9
6
9-Pin subD
Connector
Figure 27 Data Expansion Head Enhanced - Front View and Connector Location
Front View
CAUTION:
NOT a Microphone Connector
10-Pin TELCO Connector
J302
10 9 8
7
6
5 4
3 2 1
Figure 28 Remote Head Enhanced - Front View and Connector Location
10-Pin TELCO Connector
Data Expansion Head Enhanced:
a) The 10-pin TELCO connector can be used to connect a customized adapter, for example,
for connecting the helmet including microphone/earpiece (non-Motorola accessory) or an external
PTT. The customized adapter will be connected via the cable RKN4077.
b) The 10-pin TELCO connector can be used to connect a remote mount Enhanced Control Head.
DO NOT connect any other accessories (for example, microphone). This might result in
malfunctioning hardware failure.
Remote Head Enhanced:
The 10-pin TELCO connector of the Remote Head Enhanced can be used in the same way as
described on b).
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
63
Table 11 10-Pin TELCO Connector
Pin
Function
Description
10
Analog Ground
Analog Ground
9
FLT_A+
This voltage is at battery voltage level and is available as long as the radio is
connected to the supply voltage. The maximum current is 300mA. A fuse in the
radio prevents further circuit damage in case of shorting this pin to ground.
8
SCI_TX
This if for communication between the radio and the Enhanced Control Head.
7
Radio On/Off Control
This is the Enhanced Control Head service request input. A level of 5 volts
indicates that the Enhanced Control Head needs to communicate with the radio. In
addition it switches on the radio's voltage regulators. The idle state is a level below
0.6V.
6
Ground
Ground
5
Speaker -
Negative output of the radio’s audio PA.
4
Audio-
Balanced Audio - (Bidirectional)
3
BUS+
This is used for communication between the radio and an Enhanced Control Head.
2
Speaker +
Positive output of the radio's audio PA.
1
Audio +
Balanced Audio + (Bidirectional)
25-Pin subD Connector
Data Expansion Head Enhanced:
The radio must be turned ON/OFF via the Ignition Sense Cable HKN9327, which has to be
connected on Pin 10 of the Accessory Connector on the rear side of the radio.
Table 12 25-Pin subD Connector
Pin
Function
Description
1
GND
Ground
2
RS232_SCI_TX
Transmit Data (4-wire RS232 with RS232 level)
3
RS232_SCI_RX
Receive Data (4-wire RS232 with RS232 level)
4
RS232_RTS
Request to Send (4-wire RS232 with RS232 level)
5
RS232_CTS
Clear to Send (4-wire RS232 with RS232 level)
6
FLT_A+
This voltage is at battery voltage level and is available as long as the radio is
connected to the supply voltage. A fuse in the radio prevents further circuit
damage in case of shorting this pin to ground. This pin is only used together
with the pins 14, 20, and 23 to select flashing and programming mode, or to
switch the radio on.
7
Ground
Ground for RS232
8
SB9600_BUSY
SB9600 Busy
9
NC
Not Connected
64
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Table 12 25-Pin subD Connector
Pin
Function
Description
10
NC
Not Connected
11
NC
Not Connected
12
SW_B+
Switched UB +/100mA
13
SB9600_BUS-
SB9600 BUS-
14
ON_OFF_CONTROL/
FLASH_MODE
This input is intended to switch the terminal into flashing & programming mode.
When the terminal is switched off and this pin is connected with pin 6 (FLT A+),
the terminal switches on and enters flashing & programming mode.
This is also On/Off control for Std. Control Head.
15
SB9600_BUS+
SB9600 BUS+.
16
Internal Mic Audio
This input depends on radio programming mode. This microphone signal is
independent of the microphone signal on the accessory connector. The
nominal input level is 80 mV. The DC impedance is 660 ohms and the AC
impedance is 560 ohms.
17
SB9600-Reset
This output can be used to reset a SB9600 device.
18
NC
Not Connected
19
GROUND
Ground
20
IGNITION
The radio can be switched on by connecting this pin with pin 6 (FLT A+). As
long as both pins are connected, the radio will be switched on.
21
ON_OFF_GND
This is On/Off control for the old Control Head “J” (MTM300 Control Head)
22
EXPANSIONPTT
When this input is used to key up the transmitter, the internal Mic Audio input
(pin 16) is selected.
23
SB9600_SW
This input is intended to switch into SB9600 mode. The terminal must be
switched off and then this input must be connected to pin 6 (FLT A+). When the
radio is switched on again, the SB9600 mode will be active.
24
HANDSET_AUDIO
This is a low power audio output primarily intended for a connected handset.
the Dc level is 4.6 V and the AC level depends on the volume setting.
25
NC
Not Connected
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
65
9-Pin subD Connector
The pin assignment of this 9-pin subD connector will follow the requirements of an RS232 standard
interface with RS232 voltage level. The cable (see section “Connecting Cables” on page 69) which
has to be used is a standardized serial interface cable which allows to connect a data device with an
RS232 Interface such as for example PC, Laptop, Console.
Table 13 9-Pin subD Connector
Pin
Function
Description
PC Direction
1
DCD
Data Carrier Detect
Input
2
RXD
Received Data
Serial IN
3
TXD
Transmitted Data
Serial OUT
4
DTR
Data Terminal Ready
Output
5
GND
Ground
Output
6
DSR
Data Set Ready
Input
7
RTS
Request to Send
Output
8
CTS
Clear to Send
Input
9
RI
Ring Indicator
Input
66
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Connector and Pin Assignment of the Enhanced Control
Head
Flex
Cable
o
Pin 12
Front View of the Mobile
Microphone Port (MMP)
Connector
1
2
5
6
9
10
3
4
8
7
Figure 29 View of the Enhanced Control Head’s Mobile Microphone Port Connector and Flex Cable
The keypad labelling of the control head may vary
according to the specific customer/country concerns.
Table 14 10-Pin Mobile Microphone Port (MMP) Connector
Mobile Microphone
Port Pin
Default
Functions
Alternative
Functions
USB Functions
RS232 Functions
1
1-WIRE
1-WIRE
1-WIRE
1-WIRE
1-WIRE
2
GPIO_3
PTT
GP Input or Output
GP Input or Output
RS-232-RTS
3
SPEAKER
SPEAKER
SPEAKER
SPEAKER
SPEAKER
4
GPIO_2
GPIO_2 INPUT
GP Input or Output
DATA -
RS-232-RXD
5
GND
GND
GND
GND
GND
6
OPT 5V
HIGH Impedance
OPT 5V
VBUS
OPT 5V
7
MIC +
MIC +
MIC +
MIC +
MIC +
8
GPIO_1
GPIO_1 INPUT
GP Input or Output
DATA +
RS-232-TXD
9
GPIO_4
HOOK
GP Input or Output
GP Input or Output
RS-232-CTS
10
GPIO_0
GPIO_0 INPUT
GP Input or Output,
PWR ON
GP Input or Output,
PWR ON
GP Input or Output,
PWR ON
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
1
10
67
10-Pin Telco Connector
1
13
25-Pi n Back Connector
25
14
Figure 30 View of the Enhanced Control Head’s rear connectors
Table 15 10-Pin Telco Connector
Telco Connector Pin
Function
Description
1
AUDIO +
Balanced Audio + (Bidirectional)
2
SPKR +
Speaker +
3
BUS +
Serial Bus, Data sent from the Enhanced Control Head
4
AUDIO -
Balanced Audio - (Bidirectional)
5
SPKR -
Speaker -
6
GND
Ground
7
ON_OFF_CONTROL
Radio Turn-On Signal
8
SCI_TX
Serial Bus, Data sent to the Enhanced Control Head
9
FLT_A +
Supply voltage
10
GND
Ground
Table 16 25-Pin Back Connector
Back
Connector
Pin
Function
Description
Default
1
GPIO_9
GPIO
Output: Active for duration of call (car
radio mute)
2
GPIO_6
GPIO
PTT Input, TX audio from
MIC_REAR_2
3
GPIO_8
GPIO
Disabled
4
GPIO_3
GCAI PIN 2
PTT Input, TX audio from
MIC_REAR_1
68
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Table 16 25-Pin Back Connector
Back
Connector
Pin
Function
Description
Default
5
VBUS_1B
GCAI PIN 6: 5V Supply
Disabled
6
REAR_D -
GCAI PIN 4: USB D -, GPIO_2
(Shared with the front MMP)
Disabled
7
REAR_D +
GCAI PIN 8: USB D +, GPIO_1
(Shared with the front MMP)
Disabled
8
GPIO_0
GCAI PIN 10: GPIO
Input: GCAI detection / Select Line
9
VBUS_2
Second USB 5 V Supply
Disabled
10
TX
4-wire RS232 TX
11
RX
4-wire RS232 RX
12
MIC_REAR_2
Second Rear Microphone
13
GND
Ground
14
GPIO_5
GPIO
Disabled
15
GPI_7
4-Level Analogue Input
Enabled
16
1_WIRE
GCAI PIN 1: Bi-directional Serial Bus
Disabled
17
HANDSET
GCAI PIN 3: Handset Audio Output
Parallel to front GCAI
18
GND
GCAI PIN 5: Ground
19
MIC_REAR_1
GCAI PIN 7: Microphone Input
Disabled
20
GPIO_4
GCAI PIN 9: GPIO
Hook Input
21
USB_D +
Second USB D +
22
USB_D -
Second USB D -
23
RTS
4-wire RS232 RTS
24
CTS
4-wire RS232 CTS
25
PWR_ON
Enhanced Control Head Power On
Input
Disabled
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
Connecting Cables
Motorcycle Mount Enhanced Control Head-to-Remote Head
Enhanced/Data Expansion Head Enhanced (Motorcycle Mount
TELCO Cable)
Part Number: PMKN4030
Length: 2.3 m (7.55 feet)
Figure 31 Connecting Cable - Motorcycle Mount TELCO Cable
69
70
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Remote Mount Enhanced Control Head/Motorcycle Mount
Enhanced Control Head-to-Accessories (Accessories Expansion
Cable)
Part Number: PMKN4029/PMKN4056
Mobile Microphone Port
subD Connector
USB Connector
Figure 32 Connecting Cable - Accessories Expansion Cable
Table 17 Accessories Expansion Cable, Connector Pin Function
USB A JACK
1
2
3
4
Signal
subD 25 Pos
VBUS
DD+
Ground
9
22
21
18
1_WIRE
GPIO_3 (PTT)
Speaker to Headset
GPIO_2 (D-)
GPIO_1 (D+)
Ground
VBUS
MIC
GPIO_4 (HOOK)
GPIO_0
16
4
17
6
7
5
19
20
8
GPIO_9
GPIO_6
GPIO_8
TX
RX
MIC_2
Ground
GPIO_5
GPI_7
RTS
CTS
Power On
Headset
Ground
1
2
3
10
11
12
13
14
15
23
24
25
17
-
Mobile Microphone Port (MMP)
1
2
3
4
5
6
7
8
9
10
Customised Wire Color
BROWN / BLACK
ORANGE / BLACK
YELLOW / BLACK
GREEN / BLACK
BLUE / BLACK
GRAY / BLACK
BLUE
PINK / BLACK
BLACK / WHITE
BROWN / WHITE
RED / WHITE
ORANGE / WHITE
RED / BLACK
YELLOW / WHITE
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
71
Radio-to-Junction Box
Part Number: 3066537B01
Length: 6 m (19.69 feet)
JUNCTION BOX CONNECTOR
26-Pin subD
MTM800 ACCESSORY CONNECTOR
20-Pin AMP
From
(Signal Name)
Pin
Wire
Gage
Wire Colour
TWISTED PAIR
16
SPKR +
20
11
To
(Signal Name)
Pin
TWIST / 25.4
BLUE
1
SPKR +
RX_AUDIO
26
RED
2
RX_AUDIO
1
SPKR -
20
BROWN
3
SPKR -
8
DIGITAL_GROUND
20
BLACK
4
D_GND
5
TX_AUDIO
26
GREY
5
TX_AUDIO
SWITCH_BATT +
20
RED
6
SWITCH_BATT +
14
HOOK
26
YELLOW/BLCK
7
HOOK
12
AUDIO_PA_ENABL
26
TAN
8
AUDIO_PA_ENABL.
SHIELDS
9
AUDIO_GND
13
7
2
19
ANA_GROUND
N.C
20
EXT_MIC_AUDIO
26
WHITE/BLACK
SCI_RXD
26
VIOLET
26
WHITE
ALUMINIUM SHIELD
TWISTED PAIR
TWIST / 25.4
10
D_GND
11
EXT_MIC
12
N.C
13
RX (UART TX)
14
CTS
15
IGNITION
BLUE
16
DTR
RESET
RED
17
SCI_CTS
10
IGNITION
26
GREEN-BLACK
15
SCI_DTR
26
N.C.
26
PINK
17
18
SCI_RTS
26
ORANGE
18
RTS
6
KEYFAIL
26
WHITE-BLUE
19
KEYFAIL/FLASH
4
EXTERNAL_ALARM
26
WHITE-RED
20
EXT_ALARM
21
EMERGENCY
22
EXT_PTT
9
3
20
EMERGENCY
26
WHITE-GREEN
EXTERNAL_PTT
26
YELLOW
26
GREEN
SCI_TXD
ALUMINIUM SHIELD
Figure 33 Connecting Cable - Radio-to-Junction Box
23
TX (UART RX)
24
N.C.
25
N.C.
26
N.C.
72
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Data Expansion Head Enhanced Radio-to-Data Device
This is a standardized RS232 cable (will not be provided by Motorola). Use the 9-pin socket on the
front side of the Data Expansion Head Enhanced Radio to connect this cable with the data device.
Figure 34 Standardized RS232 Cable
The Data Expansion Head Enhanced has a protection
grade of IP54.
To maintain IP54 sealing when connecting an RS232 data
cable make sure to use an IP54 specified cable (example:
ROLINE AT-Modem cable ST-BU 1.8m order no.
11.01.4518).
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
73
Data Expansion Head Enhanced Radio-to-Fist Microphone
The GMKN4072 Connecting Cable replaces the existing coiled cord cable of the fist microphone
(Motorola P/N: GMMN4063).
Operation
The crimped wires of the cable have to be connected into the 16-pin Accessory Connector
(delivered with speaker GMSN4066) and than plugged into the 20-pin connector on the rear side of
the radio. The other end has a connector which fits into the fist microphone’s housing.
Making Connections
First connect the exposed four wires to the 16-pin Accessory Connector as shown in Figure 1 and
then plug the connector block into the 20-pin accessory socket on the rear side of the radio. The
connector block plugs into the center of the 20-pin accessory connector (four outside pins do not
connect).
Removing the Existing Coiled Cord Cable
1.
Rotate the locking collar at the base of the microphone in a counterclockwise direction until it
stops.
2.
Pull the cord out and away from the base of the of the microphone.
Install the new coiled cord GMKN4072 in a reverse order of removal.
Part Number: GMKN4072
Length: 65 cm (2.2 feet)
1
2
5
4
3
6
7
8
9
1 1
1 3
1 5
1 0
1 2
1 4
1 6
8 7 6 5 4 3 2 1
6 5 c m
(2 .2 fe e t)
to Accessory
Connector
to Microphone
Housing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
nc
MIC_AUDIO (blue)
PTT (white)
nc
nc
nc
GND (black)
nc
nc
nc
nc
nc
nc
HOOK (red)
nc
nc
1
2
3
4
5
6
7
8
nc
nc
PTT (white)
MIC_AUDIO (blue)
GND (black)
HOOK (red)
nc
nc
Figure 35 Pin Assignment of Cable from Accessory Connector to Microphone Housing
74
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
Radio-to-Data Device: Active Data Cable
The GMKN1022 Active Data Cable provides a 5-wire RS232 interface (for example, RxD, TxD,
CTS, RTS, DTR) between a computer and a mobile radio. The cable has to be connected to the 20pin Accessory Connector on the rear side of the radio and into the 9-pin connector of a Data Device
(for example, PC, Laptop, console)
The GMKN1022 Active Data Cable is not repairable. Order a replacement cable as necessary.
Length: 2.0 m (6.56 feet)
T o th e c o m p u te r
9
5
1
6
2 0
2
1 9
1
1 8
1 7
R a d io In te r fa c e B o x (R IB )
T o R a d io A c c e s s o r y
C o n n e c to r
Figure 36 Active Data Cable GMKN1022
Cable Connectivity
Table 18 Pin Assignment - Active Data Cable GMKN1022
9-Pin Connector
Function
20-Pin Connector
Function
1
DCD
3
External PTT
2
RXD
8
GND
3
TXD
13
SWB +
4
DTR
15
DTR
5
GND
17
CTS
6
DSR
18
RTS
7
RTS
19
TXD
8
CTS
20
RXD
9
RI
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
75
Vehicle Antenna Installation
Mobile Radio Operation and EME Exposure
To assure optimal radio performance and that human exposure to radio frequency electromagnetic
energy is within the guidelines referenced in this document, transmit only when people inside and
outside the vehicle are at least the minimum distance away from a properly installed, externallymounted antenna.The table below lists the minimum distance for several different ranges of rated
radio power.
Table 19 Rated Power and Distance
Mobile Radio Rated Power
(see Note below)
Minimum Lateral Distance
from Vehicle Body
Less than 7 Watts
20 Centimetres (8 inches)
7 to 15 Watts
30 Centimetres (1 Foot)
16 to 39 Watts
60 Centimetres (2 Feet)
40 to 110 Watts
90 Centimetres (3 Feet)
If you are not sure of the rated power of your radio,
contact your Motorola representative or dealer and supply
the radio model number found on the radio model label.
If you cannot determine the rated power out, then assure
90 cm (3 feet) separation from the body of the vehicle.
Selecting an Antenna Site
1.
Install the vehicle antenna external to the vehicle and in accordance with:
a.
b.
The requirements of the antenna manufacturer/supplier
The requirements of the vehicle manufacturer
2.
The best mounting location for the antenna is in the centre of a large, flat conductive surface.
In almost all vehicles, mounting the antenna in the centre of the roof will satisfy these
requirements. A good alternate location is in the centre of the trunk lid. If you use the trunk lid,
ensure that the trunk lid is grounded by connecting grounding straps between the trunk lid
and the vehicle chassis.
3.
Ensure the antenna cable can be easily routed to the radio. Ensure that the antenna cable is
routed separately and not in parallel to any other vehicle wiring or mobile radio cable wiring.
It is recommended to mount the antenna outside the
vehicle. Also make sure your power cable is not placed
with the antenna in parallel. Interference can cause radio
to hang.
4.
Check the antenna location for any electrical interference according to vehicle manufacturer
requirements.
5.
Make sure the mobile radio antenna is installed at least 30 centimeters (1 foot) away from any
other antenna on the vehicle.
76
MTM800 Enhanced Mobile Terminal Installation Manual
6.
INSTALLATION
Any two metal pieces rubbing against each other (such as
seat springs, shift levers, trunk and hood lids, exhaust
pipes, and so forth) in close proximity to the antenna can
cause severe receiver interference.
The MTM800 Enhanced mobile terminal has the option of a GPS board. If a GPS or
combined TETRA/GPS antenna is used, make sure that the antenna has a clear view to the
sky and that the antenna base which carries the GPS receiver is not covered with any metallic
or radio frequency absorbing material.
Antenna Installation Procedure
1.
Mount the antenna according to the instructions provided with the antenna kit. Run the
coaxial cable to the radio mounting location. If necessary, cut off the excess cable and install
the cable connector.
2.
Connect the antenna cable connector to the radio antenna connector on the rear of the radio.
3.
In case of an installed GPS board, connect the GPS antenna to the GPS antenna connector
on the rear side of the radio.
Optional
GPS-Antenna
FME Connector
Antenna BNC Connector
Battery +
Battery -
Figure 37 Connections to the Back of the Radio
Completing the Installation
1.
Mount the microphone clip to a convenient spot near your radio.
2.
If your microphone has a telephone-type connector at the end of its cord, plug this connector
into the 10-pin TELCO connector of your Junction Box.
DO NOT use the 10-pin TELCO connector of Data
Expansion Head Enhanced or Remote Head Enhanced
to plug in a microphone.
3.
To complete your radio installation, plug the power cable into the radio power connector.
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
External Speaker Installation
1.
Remove the speaker from the trunnion bracket by loosening the two wing screws.
2.
Choose a place to mount the speaker. When mounting the trunnion on the transmission
hump, be careful that the transmission housing is not affected.
3.
Use the trunnion bracket as a template to mark the positions of the mounting holes.
4.
Centre-punch the spots you marked and drill a 4 mm (5/32-inch) diameter hole at each
location.
5.
Mount the trunnion bracket with the screws supplied (see Figure 38).
6.
Insert the speaker into the trunnion bracket and tighten the two wing screws.
7.
Insert the external speaker accessory plug into the accessory connector of the radio.
Figure 38 Mounting the Speaker under the Dashboard
77
78
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
79
80
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
81
82
MTM800 Enhanced Mobile Terminal Installation Manual
INSTALLATION
INSTALLATION
MTM800 Enhanced Mobile Terminal Installation Manual
83
84
MTM800 Enhanced Mobile Terminal Installation Manual
THIS PAGE INTENTIONALLY LEFT BLANK
UPGRADING THE TERMINAL
MTM800 Enhanced Mobile Terminal Installation Manual
85
UPGRADING THE TERMINAL
Upgrade Procedure from MTM800 to MTM800 Enhanced
Existing users of the MTM800 can upgrade their equipment with the Enhanced Control Head. The
different procedures below detail the software upgrade as well as the hardware changes required.
From an MTM800 Dash/Desk Radio to an MTM800 Enhanced Dash/Desk Radio
1.
Upgrade the software on the transceiver. To use the software upgrade feature on the CPS,
choose MR7.4 SW or subsequent (see "Using the MR7.4 or Subsequent Software" on
page 88).
2.
Replace the control head with an Enhanced Control Head:
Description
3.
Part Number
Enhanced Control Head (English Keypad)
GMWN4298
Enhanced Control Head (Chinese Keypad)
GMWN4299
Enhanced Control Head (Korean Keypad)
GMWN4300
Enhanced Control Head (Arabic Keypad)
GMWN4301
Enhanced Control Head (Bopomofo Keypad)
GMWN4302
Enhanced Control Head (Cyrillic Keypad)
GMWN4303
Enhanced Control Head (English Keypad) - Hungarian
GMWN4608
Replace the fist microphone/desk microphone with a new accessory:
Description
Part Number
Desk Microphone (Mobile Microphone Port)
RMN5106
Compact Fist Microphone
RMN5107
Fist Microphone, Compact (Mobile Microphone Port)
RMN5052
Fist Microphone, Heavy Duty (Mobile Microphone Port)
RMN5053
Heavy Duty Fist Microphone
RMN5111
86
MTM800 Enhanced Mobile Terminal Installation Manual
UPGRADING THE TERMINAL
From an MTM800 Remote Radio to an MTM800 Enhanced Remote Radio
1.
Upgrade the software on the transceiver. To use the software upgrade feature on the CPS,
choose MR7.4 SW or subsequent (see "Using the MR7.4 or Subsequent Software" on
page 88).
2.
Replace the control head with a Remote Mount Enhanced Control Head:
Description
Part Number
Remote Mount Enhanced Control Head (English Keypad)
GMWN4304
Remote Mount Enhanced Control Head (Chinese Keypad)
GMWN4305
Remote Mount Enhanced Control Head (Korean Keypad)
GMWN4306
Remote Mount Enhanced Control Head (Arabic Keypad)
GMWN4307
Remote Mount Enhanced Control Head (Bopomofo Keypad)
GMWN4308
Remote Mount Enhanced Control Head (Cyrillic Keypad)
GMWN4309
Remote Mount Enhanced Control Head (English Keypad) Hungarian
GMWN4606
The cable from the control head to the transceiver remains
the same.
3.
Replace the remote head kit/expansion head kit on the transceiver with a new version of the
Remote Head Enhanced/Data Expansion Head Enhanced:
Description
4.
Part Number
Remote Head Enhanced
PMLN4904
Data Expansion Head Enhanced
PMLN4908
Replace the fist microphone/desk microphone with a new accessory:
Description
Part Number
Desk Microphone (Mobile Microphone Port)
RMN5106
Fist Microphone, Compact (Mobile Microphone Port)
RMN5052
Heavy Duty Fist Microphone
RMN5111
Compact Fist Microphone
RMN5107
UPGRADING THE TERMINAL
MTM800 Enhanced Mobile Terminal Installation Manual
87
From an MTM800 Motorcycle Radio to an MTM800 Enhanced Motorcycle Radio
1.
Upgrade the software on the transceiver. To use the software upgrade feature on the CPS,
choose MR7.4 SW or subsequent (see "Using the MR7.4 or Subsequent Software" on
page 88).
2.
Replace the control head with a Motorcycle Mount Enhanced Control Head:
Description
3.
Motorcycle Mount Enhanced Control Head (English Keypad)
GMWN4600
Motorcycle Mount Enhanced Control Head (Chinese Keypad)
GMWN4601
Motorcycle Mount Enhanced Control Head (Korean Keypad)
GMWN4602
Motorcycle Mount Enhanced Control Head (Arabic Keypad)
GMWN4603
Motorcycle Mount Enhanced Control Head (Bopomofo Keypad)
GMWN4604
Motorcycle Mount Enhanced Control Head (Cyrillic Keypad)
GMWN4605
Motorcycle Mount Enhanced Control Head (English Keypad) Hungarian
GMWN4607
Replace the expansion head kit on the transceiver with a new version of the Remote Head
Enhanced/Data Expansion Head Enhanced:
Description
4.
Part Number
Remote Head Enhanced
PMLN4904
Data Expansion Head Enhanced
PMLN4908
Replace the motorcycle remote mount cable with the following:
Description
Motorcycle Mount TELCO cable, 2.3m
5.
Part Number
Part Number
PMKN4030
Replace the fist microphone/desk microphone with a new accessory:
Description
Part Number
Desk Microphone (Mobile Microphone Port)
RMN5106
Fist Microphone, Compact (Mobile Microphone Port)
RMN5052
Heavy Duty Fist Microphone
RMN5111
Compact Fist Microphone
RMN5107
88
MTM800 Enhanced Mobile Terminal Installation Manual
UPGRADING THE TERMINAL
Using the MR7.4 or Subsequent Software
1.
Install the latest version of the MR7.4 or subsequent CPS.
2.
Copy the software image from the released CD to the default software path.
3.
Run the CPS, click Tools > Options to open the Options dialog. Set “Default Software Path”
to contain the new software archive file.
4.
Connect the MTM800 to the computer using a flashing cable. Power up the computer to enter
bootstrap mode.
5.
Click Tools > Upgrade Phone - the radio will automatically detect the new software. If the
new software file is not found, select “Customize Choice” on the upgrade dialog and click
“Browse” to manually select the software image.
UPGRADING THE TERMINAL
6.
MTM800 Enhanced Mobile Terminal Installation Manual
Power off the MTM800.
89
90
MTM800 Enhanced Mobile Terminal Installation Manual
UPGRADING THE TERMINAL
PRODUCT SPECIFIC INFORMATION
MTM800 Enhanced Mobile Terminal Installation Manual
91
APPENDIX
Product Specific Information
for Digital Terminals Type MT912M/MT812M/MT712M/MT512M
This section gives the Service Personnel an overview about product specific notes. This is
necessary to take special precautions to avoid the introduction of hazards when operating,
installing, servicing or storing equipment. This terminal meets the applicable safety standards if it is
used as described. All operating and safety instructions are to be followed carefully.
Equipment Electrical Ratings
Rated Voltage: 12 Volt DC
Rated Voltage Range: 10.8 to 15.6 V DC
Rated Current:
MT912M (380-430 MHz), MT812M (350-390 MHz), MT512M (410-470 MHz),
MT712M (806-870 MHz): 3 Amps @ 3 Watts RF power
Please be aware when planning the installation that there is a current consumption of approx. 3.5A
during PTT and even 30mA when terminal is switched off.
Transmitter Frequency Range:
TMO: 380-430 MHz (MT912M), 350-390 MHz (MT812M), 806-825 MHz (MT712M),
410-470 MHz (MT512M)
DMO: 380-430 MHz (MT912M), 350-390 MHz (MT812M), 851-870 MHz (MT712M),
410-470 MHz (MT512M)
Receiver Frequency Range:
380-430 MHz (MT912/MT912M), 350-390 MHz (MT812M), 851-870 MHz (MT712/MT712M),
410-470 MHz (MT512M)
Normal Load Conditions
Rated RF Power: 3 Watts
Rated Audio Power: 10 Watts @ 4 Ohms; 6 Watts @ 8 Ohms
Antenna Impedance: 50 Ohms
Operating Temp. Range: -30 to +60°C
Operating Time: Continuous/Intermittent
In general, the terminal transmit and receive time
(operating cycle time) is determined by the
communication system. On overload, respectively on
extensive use beyond the systems specifications at high
ambient temperatures, the terminal is protected by its
thermal control, which cuts down the RF output power,
thus reducing the terminal coverage range.
92
MTM800 Enhanced Mobile Terminal Installation Manual
PRODUCT SPECIFIC INFORMATION
Fuse Identification
In case of blown fuses during the installation replace ONLY with those of identical value.
Never insert ones of different values.
Fuse for Power Cable GKN6270/GKN6274:
Fuse for Ignition Sense Cable HKN9327:
10 A (Motorola Part Number: 6500139767)
4 A (Motorola Part Number: 6580283E02)