Centro 85-1680, 3800 LP Bbq And Gas Grill 2008 Owner's Manual

Add to my manuals

advertisement

Centro 85-1680, 3800 LP Bbq And Gas Grill 2008 Owner's Manual | Manualzz
Centro 3800
Assembly Manual
85-1626-4 / 85-1680 (G51201) Propane
85-1651-2 / 85-1682 (G51203) Natural Gas
Limited 5-Year Warranty
Read and save manual for future reference.
Assemble your grill immediately.
Missing or damaged parts should be
claimed within 15 days of purchase.
Manual Revision #:
210509
H E AV Y A R T I C L E N E E D S 2 TO L I F T
THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES
To ORDER non-warranty replacement parts or accessories, or to register your warranty,
please visit us on the web at
www.centrobbqs.com.
CAUTION
DANGER
Sharp edges. Wear gloves when assembling
your grill.
1. If you smell Gas:
a. Shut off gas to the appliance
b. Extinguish any open flame
c. Open lid
d. If odor continues, keep away from
the appliance and immediately
call your gas supplier or your
fire department
CAUTION
Read and follow all safety statements,
assembly instructions, and use and care
directions before attempting to assemble
and cook.
INSTALLER OR ASSEMBLER/CONSUMER
This manual should be kept with the BBQ at
all times.
WARNING
Failure to follow all of the Manufacturer’s
instructions could result in hazardous fires,
explosions, property damage, or serious
personal injury or even death.
2. Do not store or use gasoline or other
flammable vapours and liquids in the
vicinity of this or any other appliance.
3. An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
4. Requires two people to complete the
assembly process.
5. Beware of sharp edges.
Follow all leak check procedures carefully
prior to operation of barbecue, even if grill
was dealer assembled. Do not try to light
this barbecue without reading the Lighting
Instructions section of this manual.
T H I S B A R B E C U E I S F O R O U T D O O R U S E O N LY
HARDWARE PACK
TOOLS NEEDED FOR ASSEMBLY
No. Description
Part Number
1
¼"-20UNCX13 Screw
20120-13013-250
6
2
¼"-20UNCX38 Screw
20120-13038-250
4
3
¼"-20UNCX16 Screw
20120-13016-250
8
4
ø7 Lock Washer
41400-07000-250
18
5
ø7 Washer
40300-07000-250
18
• Rubber Mallot
6
NO.10-24UNCx10 Screw
20124-10010-250
24
Before assembling the barbecue, read these
instructions carefully.
7
ø 5 Lock Washer
41400-05000-250
24
8
ø 5 Washer
40300-05000-250
24
Assemble the barbecue on a flat, clean surface.
Grill is heavy.
9
ST4.2x10 Tapping Screw
22500-42010-137
1
10
Wrench
G413-0032-9082
1
Notes: Do not fully tighten all the nuts during this
initial stage.
11
NO.8-32UNCx10 Screw
20332-08010-250
4
12
Control Knob
G412-4500-9000
1
13
Wing Nut
33301-04000-032
1
• #2 Phillips screwdriver (Long and short)
• ¼” Slotted screwdriver (Long and short)
• Adjustable wrench
• Pliers
Quantity
Caution:
Sheet metal can cause injury. Wear gloves when installing the grill.
#1. ¼” - 20UNCX13 Screw (x6)
#2. ¼” - 20UNCX38 Screw (x4)
#3. ¼” - 20UNCX16 Screw (x8)
#4. ø7 Lock Washer (x18)
#5. ø7 Washer (x18)
#6. NO. 10-24UNCx10 Screw (x24)
#7. ø5 Lock Washer (x24)
#8. ø5 Washer (x24)
#9. ST4.2x10 Tapping Screw (x1)
#10. Wrench (x1)
#11. NO. 8-32UNCx10 Screw (x4)
#12. Knob (x1)
PARTS LIST (PROPANE) FOR 85-1626-4 (G51201)
Item Qty. Description
Part No.
Item Qty. Description
Part No.
DE
1
Cooking Grate, Sideburner
G501-0077-01
G512-0001-01
DF
1
Lid- Sideburner
G501-0070-01
G617-0004-01
DG
1
Side shelf table- Right
G512-0500-01
DH
1
Side shelf fascia-Right
G512-0005-01
EA
1
Cart side panel-Left
G512-0700-01
AA
1
Top Lid
G512-0100-01
AB
1
Lid handle
AC
1
Lid handle end cap-Left
AD
1
Lid handle end cap-Right
G617-0005-01
AE
1
Logo plate
G412-0001-01
AF
1
Thermometer
G412-0003-01
AG
2
Screw for top lid
G501-0005-01
EB
1
Cart Side Panel, Right
G512-0800-01
AH
2
Lid bumper
G508-0063-01
EC
1
Pillar, Left
G512-1100-01
ED
1
Pillar, Right
G512-1200-01
BA1
1
Burner box assembly
G512-0200-01
EE
2
Magnet assembly
G501-0016-01
BA2
1
Burner box side panel- Left
G617-0300-01
EF
1
Door assembly
G512-5000-01
BA3
1
Burner box side panel- Right
G617-0400-01
EG
1
Bottom shelf
G512-0900-01
BA4
1
Burner box- Back Panel
G502-0073-01
EH
2
Wheel with lock
G401-0061-01
EI
2
Wheel
G606-0027-01
BB
1
Upper side panel- Left
G512-0300-01
BC
1
Upper side panel- Right
G512-0400-01
BD
2
Main Burner-A
G502-1700-01
1
Hardware Pack
G512-B001-01
BE
1
Main Burner-B
G502-1900-01
1
Assembly Manual
G512-M001-01
BF
1
Carryover Assembly
G502-0012-01
1
Safety & Care Manual
G617-M001-02
BG
3
Flame Tamer
G617-0019-01
BH
3
Cooking Grate, Burner Box
G512-0008-01
BI
1
Warming Rack
G512-0004-01
BJ
1
Match Holder
G608-0019-01
CA
1
Manifold assembly
G512-4500-01
CB
1
Regulator
G433-0034-01
CC
1
Valve, Sideburner
G617-0010-01
CD
1
Metal Hose, sideburner
G608-0039-01
CE1
1
Electronic Ignition Assembly
G501-0072-02
CE2
1
Electronic Ignition Button
G501-0072-01
CF1
1
Electrode Set, Main Burner
G617-0017-01
CF2
1
Ground wire, main burner
G411-0004-01
CG
4
Control Knobs
G412-4500-01
CH
1
Series Logo
G512-0009-01
CI
1
Control Panel
G512-0003-01
CJ
1
Front Brace
G512-0007-01
CK
1
Grease Cup
G416-0015-01
CL
1
Grease Tray
G512-1000-01
CM
1
Upper Back Panel
G512-5500-01
CN
1
Tank Exclusion
G617-0037-01
DA
1
Side shelf table- Left
G512-0600-01
DB
1
Side Shelf fascia- Left
G512-0006-01
DC
1
Side Burner Drip Pan
G617-0035-01
DD1
1
Side Burner Assembly
G433-1400-01
DD2
1
Electrode Set, Sideburner
G433-0047-01
EXPLOADED DIAGRAM (PROPANE) FOR 85-1626-4 (G51201)
BI
AG
AH
CD
BH
BG
BA4
DF
DE
BC
BB
BD
BE
BF
BA1
DG
DD1
CG
DC
DD2
CH
CI
CG
DH
CF1
CE2
CM
CG
CN
CE1
CJ
CK
EA
EE
BJ
Assembly
Manual
EI
Safety & Care
Manual
EH
PARTS LIST (NATURAL GAS) FOR 85-1651-2 (G51203)
Item Qty. Description
Part No.
Item Qty. Description
1
Electrode Set, Sideburner
Part No.
AA
1
Top Lid
G512-0100-01
DD2
G433-0047-01
AB
1
Lid handle
G512-0001-01
DE
1
Cooking Grate, Sideburner
G501-0077-01
AC
1
Lid handle end cap-Left
G617-0004-01
DF
1
Lid F/ Sideburner
G501-0070-01
AD
1
Lid handle end cap-Right
G617-0005-01
DG
1
Side shelf table- Right
G512-0500-01
AE
1
Logo plate
G412-0001-01
DH
1
Side shelf fascia-Right
G512-0005-01
AF
1
Thermometer
G412-0003-01
AG
2
Screw for top lid
G501-0005-01
EA
1
Cart side panel-Left
G512-0700-01
AH
2
Lid bumper
G508-0063-01
EB
1
Cart Side Panel, Right
G512-0800-01
EC
1
Pillar, Left
G512-1100-01
BA1
1
Burner box assembly
G512-0200-01
ED
1
Pillar, Right
G512-1200-01
BA2
1
Burner box side panel- Left
G617-0300-01
EE
2
Magnet assembly
G501-0016-01
BA3
1
Burner box side panel- Right
G617-0400-01
EF
1
Door assembly
G512-5000-01
BA4
1
Burner box, back panel
G502-0073-01
EG
1
Bottom shelf
G512-2500-01
BB
1
Upper side panel- Left
G512-0300-01
EH
2
Wheel with lock
G401-0061-01
BC
1
Upper side panel- Right
G512-0400-01
EI
2
Wheel
G606-0027-01
BD
2
Main Burner-A
G502-1700-01
BE
1
Main Burner-B
G502-1900-01
1
Hardware Pack
G512-B001-01
BF
1
Carryover assembly
G502-0012-01
1
Assembly Manual
G512-M001-01
1
Safety & Care Manual
G617-M001-02
BG
3
Flame tamer
G617-0019-01
BH
3
Cooking grates
G512-0008-01
BI
1
Warming rack
G512-0004-01
BJ
1
Match holder
G608-0019-01
CA
1
Manifold assembly
G412-4100-01
CB
1
Natural Gas hose
G501-0099-01
CC
1
Valve, Sideburner
G617-0024-01
CD
1
Metal Hose, sideburner
G608-0039-01
CE1
1
Electronic Igniter assembly
G501-0072-02
CE2
1
Electronic Ignition Button
G501-0072-01
CF1
1
Electrode Set, Main Burner
G617-0017-01
CF2
1
Ground wire, main burner
G411-0004-01
CG
4
Control Knob Assy
G412-4500-01
CH
1
Series Logo
G512-0009-01
CI
1
Control Panel
G512-0003-01
CJ
1
Front Brace
G512-0007-01
CK
1
Grease Cup
G416-0015-01
CL
1
Grease Tray
G512-1000-01
CM
1
Upper Back Panel
G512-5500-01
DA
1
Side shelf table- Left
G512-0600-01
DB
1
Side Shelf fascia- Left
G512-0006-01
DC
1
Side Burner Drip Pan
G617-0035-01
DD1
1
Side Burner Assy
G433-1400-01
EXPLOADED DIAGRAM (NATURAL GAS) FOR 85-1651-2 (G51203)
BI
AG
AH
CD
BH
BG
BA4
DF
DE
BC
BB
BD
BE
BF
BA1
DA
DG
CG
DD1
DC
DD2
CH
CG
CI
CF1
DH
CE2
CM
CG
CE1
CJ
CK
EA
EE
BJ
Assembly
Manual
EI
Safety & Care
Manual
EH
ASSEMBLY INSTRUCTIONS
1
1. Separate the 2 different types of wheels, 2 locking
wheels (EH) and 2 regular wheels (EI).
EI
EH
Attach the locking wheels (EH) to the back of the
bottom shelf (EH) and the regular wheels (EI) to the
front of the bottom shelf (EG).
To secure the 4 wheels, hand tighten first. Then, tighten
further using the Wrench provided in the hardware pack.
EG
Back view
Close up
2
2. Ensure that the wheels are firmly locked in the “ON”
position before continuing.
Assemble the left side panel (EA) and the right side
panel (EB) to the bottom shelf (EG).
EA
EB
#1 - ¼” - 20UNCx13 Screw (x6)
EG
#4 - ø7 Lock Washer (x6)
Front view
#5 - ø7 Washer (x6)
Close up
ASSEMBLY INSTRUCTIONS
3
3. Attach the Front Brace (CJ) to the Left and right cart side
panels (EA and EB)
CJ
TIP: One person should align the left side, while the
second person assembles the right side.
EB
#6 - NO. 10-24UNCx10 Screw (x4)
EA
#7 - ø5 Lock Washer (x4)
#8. ø5 Washer (x4)
Back view
4
4. Assemble the Left and right Pillars (EC and ED), to the cart
side panels, as shown in figure A and B.
EC
Next, assemble the left and right pillars to the Front brace
(CJ) and the Bottom shelf (EG), as shown in figure C and D.
TIP: One person should align the left side, while the
second person assembles the right side.
A
#6 - NO. 10-24UNCx10 Screw (x8)
CJ
#7 - ø5 Lock Washer (x8)
B
D
#8. ø5 Washer (x8)
C
ASSEMBLY INSTRUCTIONS
5
THIS STEP REQUIRES 3 OR MORE PEOPLE.
DO NOT ATTEMPT ALONE. EXTREMELY HEAVY.
5a. Position the top lid and burner box assembly (A and B)
onto cart assembly (C) as shown.
A
5b. Use the hardware to connect both parts, on the left
and right sides, at the three points indicated in Figure B
and C.
B
C
#6 - NO. 10-24UNCx10 Screw (x6)
#7 - ø5 Lock Washer (x6)
#8. ø5 Washer (x6)
ASSEMBLY INSTRUCTIONS
6
6. Attach the upper back panel (CM) to both the left
and right side panels (EA and EB).
EA
Only install hardware in the bottom portion of the
back panel, as shown in figure B.
CM
#2 - ¼” - 20UNCx38 Screw (x2)
EB
#4 - ø7 Lock Washer (x2)
Back view
#5 - ø7 Washer (x2)
B
7
7. Attach the right side shelf fascia (DH) to the right side
shelf table (DG), as shown.
#6 - NO. 10-24UNCx10 Screw (x3)
#7 - ø5 Lock Washer (x3)
#8. ø5 Washer (x3)
DH
DG
ASSEMBLY INSTRUCTIONS
8
TIP: To position the right side shelf, insert the two hooks
on the side shelf assembly into the two openings
located on the right upper side panel (BC).
8. Assemble the right side shelf assembly to the cart
assembly, as shown in figure B.
DG
BC
*
#2 - ¼” - 20UNCx38 Screw (x1)
DH
#3 - ¼” - 20UNCx16 Screw (x4)
#4 - ø7 Lock Washer (x5)
#5 - ø7 Washer (x5)
*
B
9
Front
DC
9. Attach the left shelf fascia (DB) to the left side shelf
table (DA).
#6 - NO. 10-24UNCx10 Screw (x3)
#7 - ø5 Lock Washer (x3)
#8. ø5 Washer (x3)
DB
DA
ASSEMBLY INSTRUCTIONS
10
TIP: To position the left side shelf, insert the two hooks
on the side shelf assembly into the two openings
located on the upper left side panel (BB).
10. Assemble the right side shelf assembly to the cart
assembly, as shown in figure B.
BB
*
#2 - ¼” - 20UNCx38 Screw (x1)
DA
DB
A
#3 - ¼” - 20UNCx16 Screw (x4)
#4 - ø7 Lock Washer (x5)
*
#5 - ø7 Washer (x5)
B
11
11. Remove the hardware that is pre-assembled to
the side burner valve bracket(CC), as shown in
figure B. Insert the side burner valve stem through
the rear of the left side shelf fascia(DB). Assemble
the side burner valve to the side shelf fascia, using
the hardware removed.
12
Assemble the side burner control knob (#12) to
the side burner valve (CC).
Hardware may be included with the hardware pack.
DA
DB
#12. Knob (x1)
CC
B
ASSEMBLY INSTRUCTIONS
12
12a. Position the side burner (DD1) through the
opening in the left side burner drip pan (DC).
DD1
DC
A
12b. Make sure that the burner engages the side
burner valve as shown as shown in figure B.
Underside view
B
12c. Using the Wing nut provided, assemble the
side burner to the side burner drip pan (DC),
as shown in figure C.
#13 - Wing Nut (x1)
C
ASSEMBLY INSTRUCTIONS
12
Cont’d
12d. Attach the end of the side burner electrode
wire (DD2) to the underside of the side
burner electrode, as shown in figure D.
DD2
Ensure that the wire is pushed in firmly.
DC
D
12e. Place the side burner cooking grate(DE)
into postion on the side burner shelf, as
shown in figure E.
DE
E
13
For propane model only.
13. Insert the flat end of the Tank Exclusion Bar
(CN) into the groove on the upper back
panel (CO), as shown in figure B. Next,
attach the tank exclusion bar (CN) to the
Front Brace (CJ) using the self tapping, as
shown in figure C.
CN
#9 - ST4.2x10 Tapping Screw (x1)
CJ
CO
CN
B
C
ASSEMBLY INSTRUCTIONS
14
TIP: Before attempting to assemble the door (EF) to the
right pillar (ED), locate the two clasps on the door
Hinge. Next, locate the two small openings on the
right side pillar.
14a. Hold the door perpendicular to the BBQ Cart. Align
the two clasps on the door hinge (EF), with the two
holes on the right side pillar (ED). Once aligned push
the two clasps into the openings, and immediately
push down to lock clasps in place.
EF
ED
14b. Assemble the door (EF) to the right pillar (ED), as
shown in figure B, using the screws provided.
#11 - NO. 8-32UNCx10 Screw (x4)
15
15. Place the flame tamers (BG) into the burner box.
BG
Model may not be exactly as shown.
ASSEMBLY INSTRUCTIONS
16
16a. Place the cooking grates (BH) into the
burner box, as shown in figure A.
BH
A
BI
16b. Insert the three small positioning rods of
the warming rack (BI) into the rear panel of
the burner box.
B
17
17a. Insert the grease tray (CL) into the opening
in the upper back panel (CM), making sure
to engage tracks located under burner box.
17b. Place the grease cup (CK) onto the tracks,
located opn the underside of the grease
tray (CL).
CM
CL
CK
ASSEMBLY INSTRUCTIONS
18
18. Unscrew the electronic ignitor button (CE2)
and insert one AA battery into the electronic
igniter battery compartment, with the positive
end facing outward.
* Battery not included.
CE2
19
For propane model only.
For natural gas model, follow step 20.
19a. Position the 20 lb propane tank onto the
bottom shelf (EG), and secure using the
bolt (already attached) located on the
underside of the bottom shelf, as shown in
figure B.
EG
A
19b. Attach the Regulator coupling nut to the
LP cylinder valve.
ATTENTION: For your families safety, do not attempt to light this BBQ until you have reviewed
pages 4-7 of the CENTRO Safety & Care Manual.
All Safety and Leak test MUST BE PERFORMED
BY THE END USER, prior to lighting this BBQ.
B
WARNING
Do not store extra propane tanks within BBQ cart.
ASSEMBLY INSTRUCTIONS
20
For natural gas model only.
20. Attach the Natural Gas Hose (CB) to the side
burner valve (CC) as shown.
CC
CB

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement