advertisement
Infrared Mobile Digital Scouting Camera
User’s Manual
SG880MK-8M
Content
1.1 General Description..................................................................... 1
1.2 Camera Body Interfaces ............................................................. 1
1.3 Remote Control ............................................................................ 3
1.3.1 Navigating............................................................................... 4
1.3.2 Characters .............................................................................. 4
1.4 Shooting Information Display .................................................... 5
1.5 MMS/GPRS function................................................................... 5
1.6 Supported Format ....................................................................... 6
3 Quick Start Guide .............................................................................. 8
3.1 Power Supply................................................................................ 8
3.2 Insert the SD-card and the SIM-card ........................................ 9
3.3 Power on and Enter into the ON Mode ..................................... 9
3.4 Enter into the TEST Mode........................................................ 10
3.4.1 Custom Settings ................................................................... 10
3.4.2 Manual Capturing ............................................................... 10
3.4.3 View Images or Videos ........................................................ 10
3.4.4 Send MMS .............................................................................11
3.5 Power Off.....................................................................................11
4 Advanced Operations ...................................................................... 12
4.1 Settings Menu............................................................................. 12
4.1.1 Default Setting...................................................................... 16
4.1.2 Set Camera Mode ................................................................ 17
4.1.3 Format SD-Card .................................................................. 18
4.1.4 Set Photo Size ....................................................................... 18
4.1.5 Set Video Size ....................................................................... 19
4.1.6 Set Date and Time................................................................ 19
4.1.7 Set Photo Burst .................................................................... 20
4.1.8 Set Video Length.................................................................. 20
4.1.9 Set Video Sound ................................................................... 21
4.1.10 Set PIR Triggering Interval Time...................................... 21
4.1.11 Set PIR Sensitivity ............................................................... 22
4.1.12 Set Timer .............................................................................. 23
4.1.13 MMS Settings ....................................................................... 23
4.1.14 GPRS Settings ...................................................................... 25
4.1.15 Set Sending Mode ................................................................ 26
4.1.16 Set Sending to....................................................................... 27
4.1.17 Enter Password .................................................................... 27
4.1.18 Reset to Default Settings ..................................................... 28
4.2.1 Viewing Photo or Video ...................................................... 29
4.2.2 Delete Photo or Video.......................................................... 29
4.2.3 Send MMS Manually........................................................... 30
4.3 Laser Pointer .............................................................................. 30
4.4 File Numbering .......................................................................... 30
Appendix I: PIR Detection Zone .......................................................... 32
AppendixⅡ: Technical Specifications ................................................. 34
AppendixⅢ: Parts List.......................................................................... 36
1 Instruction
1.1 General Description
This camera, a digital scouting camera with black IR and MMS function , is a digital infrared surveillance camera, triggered by any movement of humans or animals monitored by a high sensitive Passive
Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 8M pixels) or records video clips (VGA) according to default settings or preset customer settings. It will then send the pictures instantly to your mobile device or e-mail via
GSM/GPRS network. You’ll be alerted just when the camera is triggered or per custom settings.
It takes color pictures or videos under sufficient daylight. While at night, the built-in 940nm IR LED’s take clear pictures or videos
(monochrome). It’s invisible to game. And this model has a new design of PIR and this new PIR is patented. The new patented PIR’s detection range can reach to 18M.
There is a 1.5” color LCD display screen on the camera and a sound recorder embedded in the camera. A laser pointer is used to help target the photo area of the camera. It supports MMS/SMS/E-mail via
GSM/GPRS Network.
It is resistant against water and snow. The camera can also be used as a portable digital camera.
1.2 Camera Body Interfaces
The camera has the following I/O interfaces: USB connector,
SD-card slot, TV output and external DC power connector.
Page 1
On the back of camera, there is a lock for theft-proof and an adjuster to change the tilt when mounting on an irregular interface e.g. tree.
Take a few moments to familiarize yourself with the camera controls and displays. It is helpful to bookmark this section and refer to it when reading through the rest of the manual.
Page 2
1.3 Remote Control
The remote control is the input device for the camera and is primarily used for customer settings and password input. This is an infrared type wireless remote control. The maximum remote distance is 30 feet.
There are fifteen buttons on the remote control.
2 abc
3 def
Page 3
1.3.1
Navigating
Press UP or DOWN to select or highlight the menu item. Press
LEFT or RIGHT to select the option of each item and press OK to make a selection.
1.3.2
Characters
When entering digits, letters or punctuations into an input column, there are some useful characters that can be used by pressing the button continuously:
Page 4
1
: 1 . / : @ _
0
: 0 + -
Press the punctuation “*” for laser pointer.
1.4 Shooting Information Display
When the camera is turned on (the power switch is slid to ON or
TEST position), the current settings will be displayed on screen.
1.5 MMS/GPRS function
This camera can send pictures instantly to your mobile device via
GSM/GPRS network. You’ll be alerted just when a picture or video has been taken. The camera sends MMS message through GPRS network, so before using this function, you need to open GPRS service from your service provider. It supports four band ：850MHz, 900MHz, 1800MHz and 1900MHz. For related information, please refer to section 4.1.14
MMS settings.
SIM card Icon：There are two SIM card icons which stand for
Page 5
different installation situations. means the SIM card is inserted and it works well. means the MMS function can’t work correctly because of loss of signal or other communication issues. If the SIM card is not inserted, no SIM card icon will be displayed.
Be sure that the PIN of the SIM card is disabled before inserting the
SIM card. (You can disable the PIN of a SIM card via your mobile phone.)
There are 4 submenu settings within the MMS/GPRS function. They are Send Mode, MMS Set, GPRS Set and Send to. Send Mode means to choose a way to send MMS (refer to 4.1 table). MMS Set and
GPRS Set means to have the right MMS and GPRS setting parameters according to your network. Send to means to input the phone number or email address which you want to send to. All 3 submenus must be correctly set up.
1.6 Supported Format
Item Format
Photo JPG
Video AVI
File format FAT32
Here are some important notices. The file system format is not a concern of the camera unless you have problems with reading the
SD-card with other devices. If this happens, please format the SD-card in the camera or in a computer and then reinsert the card into your camera.
Page 6
four or eight AA batteries.
2 Cautions position before testing the camera. The camera has no internal memory for saving images or videos. If no SD-card is inserted, the camera will shut down automatically after a continuous indication sound. in the ON position. for the first time. computer. In this case, the SD-card functions as a removable disk. minutes if no operation is done. Please turn on the power again if you want to continue to work with the remote. upgrade, otherwise the upgrade process could be interrupted. If any fault occurs after an improper upgrading process, the camera may stop functioning properly.
Page 7
SG880MK-8M
3 Quick Introductions
3 Quick Start Guide
3.1 Power Supply
To supply power for the camera, four or eight size AA batteries are needed.
Open the bottom cover. Confirm that the power switch is in the OFF position and pull out the battery pack by pulling the silver handle. Load the fully charged batteries into the pack according the polarities signs shown below. Push the battery pack back into to the battery chamber.
The following batteries with 1.5V output can be used:
1. High-density and high-performance alkaline batteries
(Recommended)
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
There are four battery slots. Slot 1 and 2 form one group and is marked “1”while slot 3 and 4 form the other group and is marked “2”.
Only one “group” of batteries is needed to supply power to the camera, but both can be used and is recommended.
When in a low-battery state, the camera will be automatically shut down after two indication sounds. Please change the batteries at this time. If you have set the MMS function, it will send you a MMS/SMS or
Email to indicate the low battery situation.
Page 8
SG880MK-8M
3 Quick Introductions
3.2 Insert the SD-card and the SIM-card
Open the bottom cover. Insert an SD-card into the card slot with unmarked side upwards. Please note that the SD-card is on the “write”
(not locked) position otherwise the camera will not function correctly.
When using MMS/SMS/E-mail functions, be sure to insert a SIM-card into the SIM-card slot with angle in the upper left.
3.3 Power on and Enter into the ON Mode
Before switching on, please pay attention to the following:
1. Avoid temperature and motion disturbances in front of the camera such as a big leaf, curtain, air-conditioner, air outlet of the chimney and other heat sources to prevent from false triggering.
2. The height from the ground for placing the camera should vary with the object size appropriately. In general, three to six feet is preferred.
Slide the power switch to the ON position to power on the camera and enter into the ON mode. Before entering into the ON mode, you can adjust the camera towards the target monitoring area by laser pointer. See section 4.3. for related information.
After switching on the camera, the motion indication LED (red) light will blink for about 10s. The 10s is a buffering time before automatically capturing photos or videos, e.g. for closing and locking the bottom cover, fixing the camera on a tree and walking away.
In ON mode, it is unnecessary to use the remote control. The camera will take pictures or videos automatically according to the
Page 9
SG880MK-8M
3 Quick Introductions default settings or previous custom settings. The camera has the sound recording function, so the sound will be embedded in the video clip while capturing a video.
3.4 Enter into the TEST Mode
Slide the power switch to the TEST position and enter into the
TEST mode. There are some functions in TEST mode: Custom settings, manual capture, preview or send MMS manually. The remote control is needed in this mode.
3.4.1
Custom Settings
Press MENU on the remote control to enter into the menu setting.
The camera can be adjusted to manually customize the camera settings which display on the LCD screen on the camera or external TV monitor.
The detailed operations will be described in the “Advanced Operations” chapter.
3.4.2
Manual Capturing
You can press RIGHT to manually capture photos or record a video.
3.4.3
View Images or Videos
There are two ways to view the captured images or videos:
1. LCD screen on camera
2. TV monitor which connects to the camera with a TV cable
Press OK to view images, the latest image will be shown in the LCD screen on the camera or TV monitor. Press UP to view the previous image and press DOWN for the next image. Please note that a video cannot be played back on the LCD screen and only the thumbnail of the video is showed.
Page 10
SG880MK-8M
3 Quick Introductions
The detailed operations like deleting images or videos will be described in the “Advanced Operations” chapter.
3.4.4
Send MMS
When the Send Mode is set as “Manual”, you can send the selected photo to the preset address in TEST mode. ”Daily Report” and “Instant” mode are used in the ON mode.
3.5 Power Off
Slide the power switch to the OFF position to power off the camera.
Please note that even in the OFF mode, the camera still consumes a small amount of battery power. Therefore, please remove the batteries if the camera is not in use for a length of time.
Page 11
SG880MK-8M
4 Advanced Operations
4 Advanced Operations
From the basic operations of the camera previewed in the previous chapter, we know that the camera has three basic operation modes:
1.
OFF mode: Power switch is in the OFF position.
2.
ON mode: Power switch is in the ON position.
3.
TEST mode: Power switch is in the TEST position.
In the above three modes, the OFF mode is the specified safe mode when replacing the SD-card or batteries and transporting the camera.
This chapter explains the advanced operations for customizing the camera settings. The settings can only be customized in TEST mode and the wireless remote is needed.
4.1 Settings Menu
To view the camera settings menu, press MENU in the TEST mode
(called settings menu in this chapter). The settings menu will be shown on the LCD on camera or the external TV monitor. There are seventeen items of menu settings:
Description Setting
Items
Camera
Mode
Choose capturing images or recording videos.
Format
Format the SD-card. All images and videos in the
SD-card will be deleted.
Page 12
SG880MK-8M
4 Advanced Operations
Photo Size
Choose the image size, e.g. 8 mega pixels or 5 mega pixels.
Video Size Choose the video size, e.g. 640×480 (VGA).
Set Clock Set camera date and time.
Photo Burst
Video
Length
Choose the continuous shooting numbers after each triggering.
Choose duration of recording video.
Video
Sound
Choose if the sound recorder will be used.
Interval
Choose how long the camera will stop functioning after each triggering. The camera’s PIR will be disabled during this interval.
Choose sensitivity of the PIR. The camera PIR is strongly related to the temperature. On high, the camera will trigger more easily. Therefore we recommend the High setting for temperatures
Sense Level exceeding 95 degrees Fahrenheit. Use the Low setting for temperatures below 35 degrees Fahrenheit to reduce false triggers. For normal use of the camera, the Normal mode is recommended and is the default setting.
Timer
The camera can be set to only record/capture at a certain time of the day when set to On. The rest of the time the camera will be shut off and will not record any triggers set off by movement. This
Page 13
SG880MK-8M
4 Advanced Operations function can be set to Off and will function to the interval settings.
The camera sends MMS message through GPRS network, so before using this function, you need to open GPRS service from your service provider. It supports four bands ：850MHz, 900MHz, 1800MHz
MMS Set
GPRS Set and 1900MHz.
You should set the right MMS setting parameters.
The settings of MMS: URL, APN, IP and Port.
Please contact the network service provider if you are not familiar with the settings.
The camera sends image through GPRS network with
SMTP protocol to a Email address. Use this way the communication cost will be much cheaper in many countries.
You should set the right GPRS setting parameters.
The settings of GPRS: sending Email server, sending email Port, GPRS APN and so on. Please contact the network service provider if you are not familiar with the settings.
There are 3 Send Modes: “Manual” works in TEST mode，“Daily report ”and “Instant” work in ON mode.
Send Mode 1)“Manual”:
Choose “Manual” in Test mode. Please ensure a
SIM card is inserted properly; Please note, only
Page 14
SG880MK-8M
4 Advanced Operations photos can be sent in TEST mode .Video information
SMS can’t be sent in TEST mode.
2)“Daily Report”:
Daily Report works only in the ON mode, which means that the camera will report the summarized information at the preset time (if the preset time is, eg.20:00PM) on how many pictures it had taken per day. So, you will get a summarized text message with the last picture taken until 20:00PM.
If it is on Camera mode, the camera will send a
MMS at the preset time. The MMS will show you the latest photo and the total qty of the pictures get taken. If it is on Video mode, the camera will send a
SMS at the preset time. The SMS will show you how many video clips the camera has taken within 24 hours.
3) “Instant”:
Instant, just works in ON mode, which means the camera will send a MMS instantly after it captures a photo or a video clip. You can choose the number of how many pictures you want it send out per day.
If it is on Camera mode and you chose the Instant
MMS mode, and set the MAX number is 10, the camera will send 10 MMS within 24 hours .And then it continues to capture photos and save them on the
Page 15
SG880MK-8M
4 Advanced Operations
Send To
Password
SD-card. After 24 hours, the camera will send MMS again when it captures photos. If it is on Video mode, the Camera will send only SMS instead of MMS.
4) “OFF”: To disable MMS function.
Choose send the image to your Phone or to Email.
1> Phone[MMS]: Send the image to cell phone via WAP.
2> Email[MMS]: Send the image to Email address via WAP.
3> Email[GPRS]: Send the image to Email address via SMTP. Use this way the communication cost will be much cheaper in many countries.
For safety purposes, enter a password each time when entering into Test mode. The default password is 0000. You could choose OFF to stop this function.
Default Set Restore all customer settings to default values.
4.1.1
Default Setting
Defaults settings are listed below:
Setting
Items
Default Options Submenu
Camera
Mode
Photo Video
Format Enter No
Photo Size 8M Pixel 5M Pixel
Page 16
SG880MK-8M
4 Advanced Operations
Video Size
Set Clock
Photo Burst
Video
Length
Video Sound
640×480 320×240
Enter
1 Photo
Adjust
2 Photo, 3 Photo
Avi 10 sec Avi 5–60 sec
On Off
Min
5–60 seconds,
1-60 min
Normal High, Low Sense Level
Timer
MMS Set
GPRS Set
Send Mode
Send To
Off
Enter
Enter
Manual
Phone[MMS]
On
Manual, Daily
Report, Instant
Email[MMS],
Email[GPRS]
ON
Start, Stop (00:00
– 23:59)
URL, APN, IP, Port
Server, APN, Port
Password
Default Set
OFF
4.1.2
Set Camera Mode
There are two modes: Camera or Video. There are two ways to set the camera mode: 1. Via shortcut key; 2. Via setting menu.
1. Shortcut key: Press UP to set the camera mode as Video or press
DOWN to set camera mode as Photo in info display of TEST mode.
2. Setting menu: The following shows how to set camera mode to
Page 17
SG880MK-8M
4 Advanced Operations
Video, provided that the previous option is Photo: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Camera Mode. c) Press LEFT or RIGHT to select Video. d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.3
Format SD-Card
The system will delete all images or videos stored in the SD-card after formatting, so make sure that you have made a backup of important data. a) Press MENU to display the setting menu. b) Press UP or DOWN to select Format. c) Press OK to choose Enter to enter into submenu. d) Press LEFT or RIGHT to select Yes. Yes will be highlighted. e) Press OK to start formatting the SD-card. During formatting, the display screen will show a message “Please Wait” as below.
Press MENU to cancel setting and return to info display.
Please Wait!
4.1.4
Set Photo Size
This parameter has two values: 5 mega pixels (5M Pixel or 5MP) and
8 mega pixels (8M Pixel or 8MP). The default value is 5 mega pixels.
The following shows how to set pixel size as 8M Pixel provided that the previous option is 5M Pixel:
Page 18
SG880MK-8M
4 Advanced Operations a) Press MENU to display the setting menu. b) Press UP or DOWN to select Photo Size. c) Press LEFT or RIGHT to select 8M Pixel. d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.5
Set Video Size
This parameter also has two values: VGA (640×480）and QVGA
(320×240）. The default value is “640x480” (VGA). The following shows how to set video size as 320×240 provided that the previous option is at 640×480: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Video Size. c) Press LEFT or RIGHT to select 320×240. d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.6
Set Date and Time
You can change the date and time of the device by setting this parameter when necessary, e.g., after every battery change. The date format is month/day/year, the time format is hour: minute:
second. The valid value for year is between 2009 and 2050.
Provided that the date and time are needed to be set to November
15th, 2010 and 10:30, the steps are as following: a) Press MENU to display the setting menu.
Page 19
SG880MK-8M
4 Advanced Operations b) Press UP or DOWN to select Set Clock. c) Press OK to enter into submenu. d) Press LEFT or RIGHT to select item, press UP or DOWN to change the value. e) Press OK to save all current setting and return to info display.
Press MENU to cancel setting and return to info display.
4.1.7
Set Photo Burst
This parameter affects the number of pictures taken for each triggering in the camera mode. It has three values: “1 Photo” “2 Photos” and “3 Photos”. Its default value is “1 Photo”. The following shows how to set photo burst to 3 Photos, provided that the previous option is 1
Photo: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Photo Burst. c) Press LEFT or RIGHT to select 3 Images. d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.8
Set Video Length
This parameter is effective and can be adjusted only when the device in the video mode under ON mode. Its value extends from 1 to 60 seconds with a step of one second. The default value is 10 seconds.
Press LEFT and RIGHT to decreases or increases the value by 1 second.
The following shows how to set video length to 5 Seconds provided
Page 20
SG880MK-8M
4 Advanced Operations that the previous value is 10 Seconds: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Video Length. c) Press LEFT or RIGHT to decrease or increase to 5 Seconds. d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and exit.
4.1.9
Set Video Sound
The following shows how to set video sound as off that the previous option is on: e) Press MENU to display the setting menu. f) Press UP or DOWN to select Video Sound. g) Press LEFT or RIGHT to select off or on. h) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.10
Set PIR Triggering Interval Time
This parameter indicates how long the PIR (Passive Infrared motion sensor) will be disabled after each triggering in ON mode. During this time the PIR of the device will not react to the motion of human (or animals). The minimum interval is 0 seconds, it means the PIR works all the time. The maximum interval is 1 hour. It means the PIR will be disabled for 1 hour after each triggering. The default value is 1 minute.
Press LEFT or RIGHT to decrease or increase the value by 5s or 1 minute.
Page 21
SG880MK-8M
4 Advanced Operations
The following shows how to set triggering interval time to 5
Minutes provided that the previous value is 1 Minute. a) Press MENU to display the setting menu. b) Press UP or DOWN to select Interval. c) Press LEFT or RIGHT to decrease or increase to 5 Minutes. d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.11
Set PIR Sensitivity
This parameter defines the sensitivity of the PIR. There are three parameters: High, Normal, and Low. The default value is “Normal”.
The higher degree indicates that the Camera is more easily to be triggered by motion, taking more pictures or recording more videos. It is recommended to use high sensitivity degree in room or environment with little interference, and to use lower sensitivity for outdoor or environment with lots of interference like hot wind, smoke, near window etc. Furthermore, the sensitivity of the PIR is strongly related to the temperature. Higher temperature leads to lower sensitivity.
Therefore it is suggested to set a higher sensitivity for high temperature environment. It is recommended to use the “Low” setting for temperatures below 35 degrees Fahrenheit and the “High” setting for temperatures exceeding 95 degrees Fahrenheit.
The following shows how to set PIR sensitivity as Low provided that the previous option is Normal. a) Press MENU to display the setting menu.
Page 22
SG880MK-8M
4 Advanced Operations b) Press UP or DOWN to select Sense Level. c) Press LEFT or RIGHT to select Low. d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.12
Set Timer
This parameter defines a certain time lapse in a day when the
Camera can be triggered. The rest of the time the device is shut off. The effective value for the ranges from 00:00：00 to 23:59:59.
Please note that the start and stop time can only be effective when the timer is set as On. Provided that the camera should work from eight a.m. to five p.m., the steps are as following: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Timer Switch. c) Press RIGHT to select On. d) Press OK to enter into submenu. e) Press RIGHT to select item, press UP or DOWN to change the value until the start time changes to 8 and the stop time changes to 17. f) Press OK to save all current setting and the option will be un-highlighted.
Press MENU to return to previous menu.
4.1.13
MMS Settings
Enter the MMS setting which provided by the network service provider. There are only four setting to be entered, the steps are as
Page 23
SG880MK-8M
4 Advanced Operations follows: a) Press MENU to display the setting menu. b) Press UP or DOWN to select MMS Set. c) Press OK to Enter into submenu. d) There are four inputs for key in URL, APN, IP and Port, press
﹟ to switch between each inputs. Press number buttons to key in the digits, letters or punctuations. Press UP(Cancel) to delete. e) Press OK to save all current setting and return to info display.
Press MENU to cancel setting and to return to previous menu.
Easy Access to MMS setting（edit in the computer）
1. Load the fully charged batteries.
2. Insert SD card.
3. Insert SIM card.
4. Power on and entering into the TEST Mode.
5. A new file named 'PROFILE.INI' is created automatically in a new folder named 'MMS' in the SD card.
6. Reedit the file 'PROFILE.INI' in the computer to set the
MMS parameters, below is for reference:
URL: (Max. 64 characters)
A.P.N: (Max. 32 characters)
IP: (Max. 16 characters)
Port: (Max. 6 characters)
Account and Password :( Some telecom operators need to
Page 24
SG880MK-8M
4 Advanced Operations set account and password to launch MMS.)
Number: (Max. 24 characters for each phone number)
Email: (Max. 48 characters for each email)
Please note that this is only an example, for more details please contact your network service provider, and there are only 4 parameters needs to be edited, do not change other parameters expect these 4 parameters to avoid operation failure.
4.1.14
GPRS Settings
You can edit the GPRS settings in profile.ini file. Below is the details about these parameters.
[GPRS Setting]
Server：Sending email server name. For example: smtp.163.cn
Port：Sending email server port. For example: 25;
APN：GPRS APN. For example: cnnet;
Account and Password :( Some telecom operators need to set account and password to launch MMS.)
Email user：Sending email address. For example: [email protected];
Email password：Sending email password. For example: 1111;
Page 25
SG880MK-8M
4 Advanced Operations
4.1.15
Set Sending Mode
There are 3 MMS modes: “Manual” works in TEST mode. “Daily report” and “Instant” work in ON mode. For more information, please refer to 4.1 settings menu.
The following shows how to set the MMS mode to Instant provided that the previous option is Off: a) Press MENU to display the setting menu. b) Press UP or DOWN to select MMS Mode. c) Press LEFT or RIGHT to select Instant. d) Press OK to save the current setting and the option will be un-highlighted.
Page 26
SG880MK-8M
4 Advanced Operations
Press MENU to cancel setting and return to info display.
If you choose “Daily Report”, you need to set the daily report time: xxH, xxM.
If you choose “Instant”, you need to set how many MMS you want to send for economy consideration.
4.1.16
Set Sending to
Enter the phone number or email which the MMS to be sent to. The following shows how to set up sending to Phone[MMS] provided that the previous option is Email[MMS]: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Send To. c) Press LEFT or RIGHT to select Phone[MMS]. d) Press OK to enter into submenu.
Press MENU to cancel setting and return to info display e) There are four inputs, press ﹟ to switch between each
input item. Press number buttons to key in the digits, letters or punctuations. Press UP to delete. f) Press OK to save all current setting and return to info display.
Press MENU to cancel setting and to return to previous menu.
4.1.17
Enter Password
If the password setting is selected as On, after switching on the camera, the LCD screen on camera will prompt to enter a password.
The default password is 0000. Please key in the password by using the remote control. It can be changed using the following steps:
Page 27
SG880MK-8M
4 Advanced Operations a)
Press MENU to display the setting menu. b)
Press UP or DOWN to select Password. c)
Press LEFT or RIGHT to select On. d)
Press OK to enter into submenu. e)
There are three inputs for key in new, old and confirm password, press ﹟ to switch between each inputs. Press number buttons to key in the digits. Press UP to delete. f)
Enter OK to save all current setting and return to info display. If the inputs are blank, the password will not be changed; if keyed in correctly, the new password is set. The LCD screen will prompt to enter the password next time you switch on the camera.
Press MENU to cancel setting and return to previous menu.
4.1.18
Reset to Default Settings
To reset the setting to the default values, the steps are as follows: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Reset. c) Press OK to reset to default settings and return to info display.
Press MENU to cancel setting and return to info display.
4.2 Playback
In playback mode, images or videos can be viewed and deleted. An image can also be manually sent by MMS. It can only be done in TEST mode.
The images can be viewed on the LCD screen on camera and TV monitor which connect to the camera with a TV cable; the videos can only be viewed on a TV monitor. For simplicity, operations with PC
Page 28
SG880MK-8M
4 Advanced Operations won’t be introduced here.
4.2.1
Viewing Photo or Video a) Switch to TEST mode and enter into info display. b) Press OK to view the latest picture (or video) in LCD screen on camera, TV monitor or Image viewer with TV-in connector. c) Press RIGHT to start playing the video clip on the TV monitor; a video clip cannot be played in LCD screen on camera. d) Press RIGHT to stop playing and return to playback mode. e) Press UP to view the next picture (or video) and DOWN for the previous. f) Press OK to return to info display.
When viewing images, the total number of all images on the SD-card will be shown as well as an index of the displaying image.
4.2.2
Delete Photo or Video a) View the image (or video) which to be deleted (please refer to
4.3.1). b) Press MENU to display the playback menu. c) Press UP or DOWN to select Delete. One is highlighted. d) To delete the current image, just skip this step. To delete all images and videos, press LEFT or RIGHT to select All. e) Press OK, No and Yes are prompted. No is highlighted. f) Press LEFT or RIGHT to highlight Yes. g) Press OK to delete the image or video.
Press MENU to cancel and return to playback.
Please note that after deleting a picture or a video file, the deleted
Page 29
SG880MK-8M
4 Advanced Operations files can’t be restored! Furthermore, in order to delete all images and video clips in the SD-card, it is suggested to format the SD-card. Please refer to 4.2.4.
4.2.3
Send MMS Manually
The Send MMS option will only be shown when the setting item
Send Mode is selected as Manual. a) View the images and select one to send. b) Press MENU to display the playback menu. c) Press UP or DOWN to select Send Message. Send is highlighted d) Press OK to send MMS according to the setting in setting menu.
Press MENU to cancel and return to playback.
Please note that the images can only be sent and video cannot be sent. If the SIM card is not inserted, the image cannot be sent as well.
4.3 Laser Pointer
The laser light pointer beam can be turned on as an additional function for pointing to an object or a certain region of interested
(ROI).
Press ﹡ to turn on the laser light in TEST mode and use the tilt adjuster on the back of camera to adjust the angle of capturing direction.
!
NOTE:
Please note that the laser could be harmful to the eyes if pointed at another person.
4.4 File Numbering
Page 30
SG880MK-8M
4 Advanced Operations
Images and videos are saved in the pre-named folder. File numbering continues by adding one to the last number for each new image or video. Saving names are IMAG0001.JPG or IMAG0001.AVI.
Through the suffix you can distinguish whether the file is an image
(with suffix .jpg) or a video (with suffix .avi).
Page 31
SG880MK-8M Appendix I: PIR Detection Zone
Appendix I: PIR Detection Zone
The figure4 shows the detection range in different detection angle.
When the detection angle is 35°,the detection range is 50ft. When the detection angle is 52°,the detection range is 30ft.
Figure 4
The PIR detection angle (α) is just barely larger than the field of view angle(β). The advantage of this design is to avoid empty pictures and get available pictures.
Page 32
SG880MK-8M Appendix I: PIR Detection Zone
Figure 5
SG880MK-8M has a new design of PIR and this new PIR is patented. The new patented PIR’s detection range is ultra-long. The figure 6 shows the compared detection zone between normal PIR and the new patented PIR.
Figure 6
Page 33
SG880MK-8M Appendix Ⅱ
: Technical Specifications
AppendixⅡ: Technical Specifications
Image Sensor
Lens
PIR detection range
Display Screen
Memory Card
Picture Resolution
Video Resolution
PIR Sensor
PIR Sensitivity
Trigger Time
Weight
Operation/Storage
Tem.
Interval
Photo Burst
Video Length
Power Supply
Stand-by Current
Power Consumption
5MP Color CMOS, 8MP Interpolation
F/NO=3.0 FOV(Field of View)=52°
18M/60F
1.5” LCD
From 8 MB to 32 GB
8MP = 3328 ×2496
5MP = 2560×1920
640×480 (16fps) 320×240 (20fps)
Multi Zone
Adjustable (High/Normal/Low)
1.2s
0.30 kg
-20 - +60°C / -30 - +70°C
1s – 60 min.
1–3
1–60s
8×AA or 4×AA
< 0.25 mA (<6mAh/Day)
400 videos（interval=5min,video length=10s）;
>500 MMS(use 8*AA batteries)
Page 34
SG880MK-8M
Mounting
Appendix Ⅱ
: Technical Specifications
Low Battery Alert
Display Screen
Sound Recording
Dimensions
Operation Humidity
Security authentication
*without battery
LED Indicator
LCD display on camera
Available
Rope/Belt/Python lock
140 x87 x55 mm
5% - 90%
FCC, CE, RoHS
Page 35
SG880MK-8M
Appendix Ⅲ: Parts List
AppendixⅢ: Parts List
Part Name
Digital Camera
Quantity
One
Wireless Remote Control
USB Cable
One
One
TV cable One
Belt One
User Manual One
Antenna One
Enhanced Antenna （ Option）
Page 36
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement