advertisement
20'' LCD HDTV Owner's Manual
Model : LVQ2001
Please read all the safety and operating instructions carefully before you begin.
Safety class
This is an IEC safety class I product and must be grounded for safety.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS............................................................................................................
1-2
PREFACE...........................................................................................................................................................
3
WARNING AND CAUTIONS...............................................................................................................................
4-5
SPECIFICATIONS..............................................................................................................................................
6
ACCESSORIES..................................................................................................................................................
6
TV ASSEMBLY DRAWINGS...............................................................................................................................
7
INSTALLATION
FRONT .......................................................................................................................................................
8
BACK..........................................................................................................................................................
8
PC................................................................................................................................................................
9
ANTENNA....................................................................................................................................................
10
AV EQUIPMENT............................................................................................................................................ 11
BATTERY INSTALLATION (REMOTE CONTROL UNIT) ...................................................................................
12
REMOTE CONTROL DESCRIPTION ....................................................................................... ........................ 13-14
OPERATION INSTRUCTIONS
PC................................................................................................................................................................
15-17
VIDEO..........................................................................................................................................................
18-24
TROUBLESHOOTING GUIDE............................................................................................................................
25
SERVICE TIPS .................................................................................................................................................
26
-1-
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with manufacturer instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including Amplifiers) that produce heat.
9.Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles, and the point where they exit from the apparatus.
10.Only use attachments/accessories specified by the manufacturer.
11.Unplug this apparatus during lightning storms or when unused for long periods of time.
12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
13.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
14.No naked flame sources, such as lighted candles should be placed on the product.
15.A warning that an apparatus with class I construction shall be connected to a MAINS socket outlet with a protective earthing connection.
16.where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-1-
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
T h e s y m b o l i n d i c a t e s t h a t d a n g e r o u s v o l t a g e c o n s t i t u t i n g a r i s k o f e l e c t r i c s h o c k i s p r e s e n t w i t h i n t h i s u n i t .
T h e s y m b o l i n d i c a t e s t h a t t h e r e a r e i m p o r t a n t o p e r a t i n g a n d m a i n t e n a n c e i n s t r u c t i o n s i n t h e l i t e r a t u r e a c c o m p a n y i n g t h i s u n i t .
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
-2-
PREFACE
Thank you for purchasing this TV. To enjoy your set from the very beginning, read this manual carefully and keep it handy for ready reference.
INSTALLATION
Position the TV in the room where light does not strike the screen directly .
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessive warm locations to prevent possible damage to the cabinet or premature component failure.
This LCD TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other power supply.
Do not cover the ventilation openings when using the TV.
CAUTION
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD
PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lightning, unplug the power cord and antenna cord to prevent damage to your
TV. All repairs to this TV should only be performed by qualified TV service personnel.
-3-
WARNINGS AND CAUTIONS
Warning
High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
Warning
To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution
Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.
Caution
Do not squash power supply cord under the television receiver.
-4-
WARNINGS AND CAUTIONS
Caution
Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children.
Serious injury may result if it should fall.
Caution
Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall.
Caution
When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Caution
Avoid exposing the television receiver to direct sunlight and other sources of the heat. Do not stand the television receiver directly on other produces which give off heat .E.g.video cassette players and audio amplifiers.
Do not place naked flame sources, such as lighted candles on the television.
Caution
If the television is to be built into a Compartment or similarly enclosed, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.
Dim:515*320mm(
-5-
SPECIFICATIONS AND ACCESSORIES
SPECIFICATIONS
Model
LCD panel
Television system
AV system
LVQ2001
20 INCH TFT LCD
NTSC-M/N
PAL-M/N
PAL-4.43MHz-50Hz NTSC-3.58MHz-60Hz SECAM-4.29MHz-50Hz
NTSC-4.43MHz-60Hz PAL-3..58MHz-50Hz
PAL-3.58MHz-60Hz PAL-4.43MHz-60Hz
Channel coverage
Analog RGB mode
Resolution
Display Colour
Comb Filter
Contrast
Brightness
Viewing angle
OSD language
Power source
Power consumption
Audio power
Lamp life
Video/Audio terminals
Auto switch off
Supplied accessories
VHF-H: 195 499MHz
UHF: 501 933 MHz
640X480/60Hz, 800X600/60Hz
800X600
16.7million colours
Adaptive 2/4 line
800:1
500cd/m 2
170° (H)/170° (V)
English/French/Italian/Portuguese /Spanish
DC 12V/5A, 100-240V, 50/60Hz
60W
3W+3W
50,000 hours
RF input: Cable/ antenna RFx1
VIDEO input: VIDEOx1
S-VIDEOx1
YCb/Cr x 1
GRAPHIC input: Analog RGB 15pin x1
AUDIO input: 3(VIDEO YCbCr,PC)
When a signal is absent loner than 10 minutes the unit will automatically switch off.
Remote control, AC adapter, AC cord, Instruction Manual, Batteries.
Accessories for hanging be attached as customer need
ACCESSORIES:
One Remote Control Two size AAA batteries Accessories for hanging
One AC a dapter
One AC c ord
C
D
A
B
-6-
TV ASSEMBLY DRAWINGS
1. Adjust the angle of the screen.
The horizontal angle could be adapted to suit yourself. It’s range is up to 40°.
Seeing drawings below.
40°
2. Hang the TV on the concrete wall.
Step1:Disassemble the pedestal.
Step2:Hang the TV on the wall refer to drawings below.
Distance between hole A and B is 40mm;
Distance between hole A and C is 175mm;
Angle can be adjust between +/-27° vertically.
3. Assemble stand
Seeing drawings right side.
X4
X4
X4
A
B
X2
C
D
X2
X6
-7-
INSTALLATION
FRONT
CH+
CH-
VOL+
VOL-
MENU
AUTO/EXIT
Buttons:
1.MENU: To enter main menu or enter the item where the cursor is.
2.CH+/CH-:Move the cursor in the main menu or change program in TV mode.
3.VOL+/VOL-: Adjust the item you select or adjust volume.
4.AUTO/EXIT: Act as AUTO adjustment hot key when OSD is not displayed. Otherwise perform erase OSD.
5. : Video source select or power off. Press this key longer than 3 seconds to turn off the
TV.
BACK
+
-
+
-
ANTENNA INPUT
-8-
INSTALLATION
PC:
STEPS:
1. Connect Video Cable a. Make sure both the TV and computer are powered-OFF.
b. Connect the video cable to the computer.
2. Connect the Audio cable.
3. Connect power cord
Connect the AC ADAPTOR to the TV, then to a properly grounded AC outlet.
4. Power-ON Computer
Power-ON the TV first, then Power-ON the computer.
This sequence is very important.
5. If the TV still does not function properly, please refer to the troubleshooting section to
diagnose the problem.
* Please don't open the Cover
8
+
-
+
-
Connector lug
CAUTION:
Hold on to the connector lug when you unplug any one of the connectors, Do not direct pull on the cord as it is prone to damage.
-9-
ANTENNA
INSTALLATION
-10-
INSTALLATION
AV EQUIPMENT
This TV provides one group of AV input terminals including one S-Video and one group of YCbCr for convenient connection to VCR, DVD or other video equipment. Please refer to the owner’s manual of the equipment to be connected as well. You can use the AV and YCbCr input terminals on TV set rear as follows.
VIDEO EQUIPMENT with YCbCr with terminal
To audio outputs
VIDEO EQUIPMENT
Y
W
R
G
Yellow (video)
White(audol L,mono input)
Red(audio R,Cr)
Green(Y)
B Blue(Cb)
Y
To video output
W R
W R G B R
W R G B R
+
-
+
-
W R with S-video terminal
VIDEO EQUIPMENT
W R
To S-VIDEO output
To audio outputs
You can also the S-VIDEO terminal if your video equipment has S-VIDEO.
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc.....
If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to component video input on your TV. Your TV can receive either
525i/60Hz or 625i/50Hz interlace signals.
*Please keep AC cord unplugged when connecting TV system.
-11-
BATTERY INSTALLATION (REMOTE CONTROL)
Insert Batteries Into the Remote Control
1. Remove the battery cover.
2. Insert the two AAA 1.5V batteries and ensure correct polarity (+ or -)
3. Replace the battery cover.
Replace with new batteries when the TV set shows no response to the remote control.
Note:
1. Alkaline battery recommended
2. Remove batteries when they are flat or if the remote control has not been used for a long time.
3. Do not mix new and old batteries or different types/brands.
-12-
REMOTE CONTROL DESCRIPTION
1
2
13
3
6
7
14
11
9
8
18
17
10
15
16
4
12
5
1.POWER:turn on or off the TV
2.NUMBER BUTTONS
3.VOL+/- :adjust volume
4.CH+/- :change program forward/backward
5.MENU: access main menu
6.BUTTONS / : move cursor in main menu
7.BUTTONS / : adjust item you selected
8.DISPLAY: recall program number, system etc on the screen
9.RETURN: return to the last viewed program
10.INPUT: select external video source
11. MUTE: mute sound
12.MTS :MONO/STEREO AND SAP
13.SLEEP: set time to turn off the TV
-13-
REMOTE CONTROL DESCRIPTION
14.SYSTEM:shift frequency system(STD,HRC,IRC,AIR)
15.
VCR: rectify distorted signal from VCR (video cassette recorder ).
16.
AUTO: auto adust the position and size of the picture in PC mode
17.SOUND:3 sound mode.SPEECH STANDARD MUSIC
18.PICTURE:3 picture mode.SOFT STANDARD RICH
DIRECT PROGRAM SELECTION (0-9 BUTTONS)
1.To select one-digit channel:
Press 0-9 digit buttons and wait for 2 seconds. For example if you need channel 5, please input "5" button and the screen displays "5", the TV set goes to channel 5 in 3 seconds.
2.To select two-digit channel:
Press two digit buttons in order to input the channel number. For example, you need channel
10, please input "1" button, followed "0" button and the set goes to channel 10. Be sure that the second press should be within 2 seconds.
3.To select three-digit channel:
Press three digit buttons in order to input the channel number. For example if you need channel 110, please input "1" button firstly, followed "1" button secondly and followed 0 button thirdly then the set goes to channel 110. Be sure that the second press is within 2 seconds.
-14-
OPERATION INSTRUCTIONS PART I (PC)
All MENUs are shown below
-15-
OPERATION INSTRUCTIONS PART I (PC)
AUTO CONFIG:
:
-16-
OPERATION INSTRUCTIONS PART I (PC)
OPERATION OF MAIN MENU
There are 12 items listed in the main menu
Step1:Press menu to enter the main menu
Step2:press to select an item
Step3:press menu to enter this item
Step4:press to adjust this item
Item
Contrast
Brightness
H.Position
V.Position
Clock
Focus
OSD H.Pos.
OSD V.Pos.
Color
Language
Reset
Exit
Function description
Increase or decrease contrast
Increase or decrease brightness
Move image toward left or right
Move image toward up or down
Increase or decrease the size of image
Increase or decrease noise of the image
Move OSD position horizontally on the screen
Press move right,press move left
Move OSD position vertically on the screen
Press move up,press move down
Color temperature:6500K,9300K,USER
5 languages: English/French/Italian/PortugueseSpanish
Perform auto adjust
Automatically adjust
H.Position,V.Position,Clock,Focus,White balance
Exit OSD
PRESET MODES
To reduce the need for adjustment of different modes, the TV has default setting modes that are most commonly used, These are shown in the table below. For optimum adjustment, perform the Auto Setup in Windows "Full Screen" mode.
PRESET MODE (recommended resolution is 800*600@60Hz)
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
1
4
5
2
3
8
9
6
7
720*400
640*350
640*480
640*480
640*480
800*600
800*600
800*600
800*600
72
75
56
60
70
70
60
75
72
31.47
31.469
31.47
37.86
37.50
35.156
37.88
46.88
48.08
Band
Width(MHz)
28.322
25.175
25.175
31.5
31.5
36
40
49.5
50
Polarity
H/V
-/+
+/-
-/-
-/-
-/-
+/+
+/+
+/+
+/+
-17-
OPERATION INSTRUCTIONS PART II(VIDEO)
TUNING PROCEDURE(NOTE)
STEP 1:
Turn on the TV
STEP 2:
AUTO MEMORY
1. Press the MENU button on your TV (or remote controller) three times to enter TUNING menu.
If it is in VIDEO/S-VEDIO/YCbCr /PC mode, it can't enter TUNING menu.
2. Press Buttons to select "AUTO MEM." then press button to automatically search
and store all the signals in your area. broadcasting TV When presetting complete, the initial
position number will reappear.
1
NOTE:
You 'd better select the correct frequency system, color and sound system for the first channe before searching. Detailed discreption is said below.
There are 4 frequency system can be used, such as STD,HRC,IRC,AIR.
In AIR mode, the set receives antenna signals;
In STD/HRC/IRC mode the set receives Cable TV programs.Please select:
AIR: If using VHF/UHF antenna.
STD,HRC,IRC:If using Cable TV.
TO SKIP A PROGRAM
You may skip any program number by following the steps below:
1.Select the program number to be skipped by pressing CH+/CH- button or number button .
2.According to mentioned steps above, enter TUNING menu.
3.Press buttons to select "ADD/ERASE", then select "ERASE" by buttons.
4.When the skip is off, it indicates that this channel is not skipped.
NOTE:
If the channel is skipped,you can't obtain it by CH+/CH-. But you can get it by using
NUMBER KEY(0-9).
-18-
OPERATION INSTRUCTIONS PART II(VIDEO)
STEP 3 FINE TUNING
If signal is weak, the fine tuning is necessary.
1. Enter the channel you want to by CH+/CH- buttons or NUMBER KEY(0-9).
2. According to mentioned steps above, enter TUNING menu.
3. Select "FINE" by button.
4. Press buttons until the best possible picture and sound are obtained.
NOTE:
You can execute these operations only if a tuner box is connected to the TV.
-19-
OPERATION INSTRUCTIONS PART II(VIDEO)
ADJUST PICTURE
1.According to mentioned steps above, enter PICTURE menu.
2.Selecttheitem to be adjusted by buttons.
3.Adjust the image quality by buttons.
ADJUST SOUND
1.According to mentioned steps above, enter SOUND menu.
2.Select the item to be adjusted by buttons.
3.Adjust the sound quality by buttons.
-20-
OPERATION INSTRUCTIONS(VIDEO)
SELECT LANGUAGE
1.According to mentioned steps above, enter SETUP menu.
2.Select the LANGUAGE item to be adjusted by buttons.
3.Adjust the language you want by buttons.
There are 5 languages:ENGLISH and SPANISH,PORTUGUESE,ITALIAN,FRENCH.
SET COLOR TEMPERATURE
1.According to mentioned steps above, enter SETUP menu.
2.Select the COLOR TEMP item by buttons.
3.Select the color temperature you want by buttons.
COLOR TEMP.
WARM
-21-
OPERATION INSTRUCTIONS(VIDEO)
CCD/VCHIP(CCD and VCHIP are in one menu-VCHIP SETTING menu)
CC/V-CHIP
I Setting Closed Caption(CCD)
1.Press button to select Closed Caption item.
2.Press the button to select.
You can select the caption data channel (C1/C2/C3/C4), the text service channel
(T1/T2/T3/T4) or turn off the Closed Caption (Off).
Notes:
1.Some TV programs may not be broadcast with closed caption signals, and therefore, the TV will not be able to display captions. Also, text information is not offered by all stations.
2.Some TV programs only provide one channel caption, one channel text , or only caption
without text.
II Setting V-CHIP
PART 1:ENTER/EDIT PASSWORD AND ENABLE V-CHIP
1.Press buttons to select Vchip password item.
2.Press buttons to enter PASSWORD menu .
3.Use buttons to move cursor,use buttons to change number(the preset password is111111).
4.Press CC/V-CHIP button to confirm and exit. IMPORTANT: This password can be changed after the original password is entered.
5.To edit password,please enter EDIT PASSWORD menu.
6.Enter new password and press CC/V-CHIP button confirm.
-22-
OPERATION INSTRUCTIONS(VIDEO)
PART 2:MPAA RATING SET-UP
To enable V-chip setting, you should set V-CHIP ENABLE to ON in VCHIP SETTING menu.
Rating guidelines are provided by broadcast stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.
1.Press button to select MOVIE BLOCKING item.
2. Press button to enter into MPAA RATING sub-menu.
3.Use to select the desired rating.
4.Press button to block the rating ("+ " will appear), or unblock ("- " will appear).
Movie Ratings:
* Unblocked
* G and Above (general audience)
* PG and Above (parental guidance suggested)
* PG-13 and Above (13 years and up)
* R and Above (restricted)
* NC-17 and Above (18 years and up)
* X (adult)
V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals ), then denies access to programming if the program's rating meets the limitations you select. In this case, the program will be blocked.
-23-
OPERATION INSTRUCTIONS(VIDEO)
PART 3:TV BLOCKING
TV Parental Guidelines may have one or more letters added to the basic rating to let parents know when a show contains higher levels of violence, sex, adult language or suggestive dialogue:
1.Press button to select TV BLOCKING item.
2.Press button to enter into TV BLOCKING sub-menu.
3.Use to select the desired rating(column A).
4.Press to block the rating ("+ " will appear), or unblock ("- " will appear).
NOTE:
If there are content categories in the rating that you set,please select and block.They are in column F,V,S,L,D. If you want to exit the menu,please press CCD/V-CHIP button
Repeatedly.
TV Ratings:
* Unblocked
* TV-Y and Above (all children) (individual content categories do not apply)
* TV-Y7 (7 years and up)
* TV-G and above (general audience) (individual categories do not apply)
* TV-PG and Above (parental guidance suggested)
* TV-14 and above (14 years and up)
* TV-MA (mature audience)
Content Categories:
* F Violence: fantasy violence (applies only to TV-Y7)
* Violence: (applies to TV-PG and above, TV-14 and Above, TV-MA)
* Sex scenes: sexual situations (applies to TV-PG and above, TV-14 and Above, TV-MA)
* Language: adult language (applies to TV-PG and above, TV-14 and Above, TV-MA)
* Dialog: sexual dialogue (applies to TV-PG and Above,TV-14)
-24-
TROUBLESHOOTING GUIDE
PART I (PC)
This LCD TV has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market,users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected.
ATTENTION
This LCD TV Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD TV.
The picture is unclear and unstable,please perform the following steps:
1.Enter PC to "Shut Down Windows "status while you're in MS-WINDOWS environment.
2.Check the screen to see if there are any black vertical stripes appear. If so ,use the "Clock" function in OSD menu and adjust(by toggling numbers )until those bars disappear.
3.Move to "Phase "function in OSD menu again and adjust the TV screen to its most clear display.
4.Click "No" on "Shut Down Windows" and back to the normal PC operating environment.
If there's no picture on the LCD TV, please perform the following steps:
1.Make sure the power indicator on the LCD TV is ON, all connections are secured, and the system is running on the correct timing .
2.Turn off the LCD TV and then turn it back on again. If there is still no picture, press the
Adjustment Control button several times.
3. If step 2 doesn't work, connect your PC system to another external CRT. If your PC system
Functions properly with a CRT TV but it does not function with the LCD TV, the output timing of the VGA card may be out of the LCD's synchronous range. Please change to an alternative mode listed in the Standard Timing Table or replace the VGA card, and then repeat steps 1 and 2.
If you have chosen an output timing that is outside of the LCD TV's synchronous range
(Horizontal:24~61KHz and Vertical: 56~75Hz), the OSD will display a "Out of Range" message, Choose a mode that is supported by your LCD TV. Also, if the signal cable is not connected to LCD TV at all or properly, the TV screen will display a message "No Input
Signal".
-25-
SERVICE TIPS
Incorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances which visibly affect your picture. Proper installation, a good aerial are your best safe-guards against these disturbances.
Moving ripples across the screen are caused by nearby transmitting or receiving-short-wave radio equipment.
Herringbone pattern and partial picture loss can result from the operation of diathermy equipment from a nearby doctor's surgery or hospital.
Weak TV signals from long distant stations result in an unstable picture and give the effect of falling snow. An antenna adjustment or antenna amplifier may be needed.
Multiple image caused by TV signals reflected back from surrounding buildings, hills, aircraft, etc. is minimized by correct aerial positioning.
Nearby cars and electrical motors can cause small streaks across the picture or make the picture roll.
Before calling for service, have you checked ( ) the following chart on symptoms and solutions.
Symptoms
No picture, no sound
Poor sound, picture OK
Poor picture, sound OK
Weak picture
Blurred picture
Double image
Lines in picture
Distorted picture
Weak reception on some channels
Horizontal bars
Picture rolls vertically
Poor colour
No colour
Misoperation of Remote control
No Remote control
On Screen Display Control outside the screen o
S ti lu n o ry
T
d h
C ck e e
a a ri o l c n n ct e io ck e h
C n re e iff ch t n a e n if l,
K
O p
, b ro b a
s ly ta tio
t n u ro le b n o s n
o ck a
b ro ke
w n se f e
a a ri o l f b r e
R ri
-o n e a t e ir s ri e l ( a in if o d r o ty p e ro
P a b ly b
lo ca n l i te d
A ju e rf re
f st in st ju d
A ri
b h g n u
t e o
c g in ce n
, su ch
a a s
a n p p lia tr n o n ce st ju d
A o
c tr n
c ss e tn n o o tr st a
c o tr n o ck e h
C
s
if ta tio
is n st ju d
A u lo o
c ro
b d a st ca in r co tr n o lo o
c g u h
C ck e
s
if ys m te w
s itc ck e h
C
is h o
c e rr ct
is h o
"
" n ri e tt a s e
R in
o
if
/o n
s ff itc w h
C ck e
B m e te o o
c tr n o
-26-
Call us for technical support
Monday to Friday 8:00 am to 6:00 pm Pacific Time
Tel:1-877-851-2528
Web: WWW.VISIONQUESTTV.COM
VISIONQUEST SERVICE CENTER
4906 BLEECKER STREET
Baldwin Park, CA 91706
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project