Uniden G755 Guardian Wireless 480-TVL Indoor and Outdoor Video Surveillance System Use and Care Manual

Video Surveillance System
G455/G755 User’s Guide
1
Customer Care
At Uniden®, we care about you!
If you need assistance, please do NOT return this product to your place of purchase. Our customer
care specialists are available to serve you.
Quickly find answers to your questions by:
1. Reading your owner’s manual, included with this product.
2. Visiting our customer support website at www.uniden.com.
3. Calling our customer care specialists at 1-817-858-2900 or 1-800-658-8068.
Contents
Customer Care..............................................................................................2
System Upgrade................................................................................... 34
Language................................................................................................ 34
Quick Tips.................................................................................................... 35
GETTING STARTED.......................................................................4
Using This Manual.......................................................................................4
What’s Included............................................................................................5
Getting to Know the Receiver and Cameras......................................6
What the lights mean............................................................................6
Setting Up the Equipment.......................................................................7
Set Up the Receiver................................................................................7
Mount the Camera Stand.....................................................................7
Attach the camera..................................................................................9
Setting Up Your System......................................................................... 10
Camera Settings................................................................................... 10
System Settings.................................................................................... 10
Recording Settings.............................................................................. 10
Remote Access.......................................................................... 36
Overview...................................................................................................... 36
System Requirements......................................................................... 36
Connecting to the Internet............................................................... 36
Connecting to the Intranet (Home network)............................. 37
Setting up a Portal Account.................................................................. 37
Enter the UID Code.............................................................................. 39
Enter Security Code............................................................................. 39
Record Video.......................................................................................... 40
Take A Snapshot................................................................................... 40
Downloading Apps.................................................................................. 40
AndroidTM................................................................................................ 40
iPhone®.................................................................................................... 42
Uniden Guardian Software Operation Overview................... 11
Live Screen.................................................................................................. 11
What the icons Mean.......................................................................... 12
Changing How the Live Screen Displays..................................... 13
Using the PentaZoom™ Feature..................................................... 14
Using Your System................................................................................... 15
Recording Live Video.......................................................................... 15
Playing Back Recorded Video.......................................................... 15
Adding New Cameras......................................................................... 16
Maintaining Your System........................................................ 45
Upgrading your Uniden Guardian Firmware.................................. 45
Taking Care of Your Hardware............................................................. 45
Receiver................................................................................................... 45
Cameras................................................................................................... 45
Uniden Guardian Screen Descriptions.................................... 18
Overview...................................................................................................... 18
Uniden Guardian Settings Screen...................................................... 18
Camera Setup Screen.............................................................................. 20
Pairing...................................................................................................... 20
Camera On.............................................................................................. 21
Recorder Setup Screen....................................................................... 22
Network Setup Screen........................................................................ 24
Alarm Setup Screen............................................................................. 27
System Setup Screen............................................................................... 29
Additional Information............................................................ 48
Product Specifications............................................................................ 48
Lithium-Polymer Battery Warning.......................................... 49
Recycling and Disposal Information....................................... 49
FCC Compliance Information.................................................. 50
Part 15 Compliance Statement....................................................... 50
RF Exposure Information................................................................... 50
IC Compliance Information...................................................... 51
Radio Equipment Notice................................................................... 51
CE Compliance Information..................................................... 51
One-year Limited Warranty..................................................... 51
Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden
expects consumer’s use of these products to be in compliance with all local, state and federal law. For further information
on video surveillance and audio recording legal requirements, please consult your local, state and federal law.
© 2012. All rights allowed by law are hereby reserved.
GETTING STARTED
Using This Manual
This manual is set up in six main sections:
••
Getting Started. This section describes your hardware and how to physically set it up.
••
Uniden Guardian™ Software Operations Overview. This section lists basic operations in an
abbreviated format. It references screen details in the third section.
••
Uniden Guardian Screen Descriptions. Here you will find detailed descriptions of each screen
and how it is used.
••
Remote Access. This section tells you how to connect your surveillance system to the internet
and access it from your PC or other devices.
••
Maintaining Your System
••
Solving Problems
4
What’s Included
You should have the following items:
G4 or G7 Receiver and Cradle
AC Adapter (3)
GC45 Camera (2) Stand (2)
Antenna (2)
Not Shown: Mounting screws, Ethernet cable, 2 extension cords, and SD Card.
If any items are missing or damaged, contact our Customer Care Line immediately.
Never use damaged products!
5
Getting to Know the Receiver and Cameras
Receiver
(back/side)
Antenna
Cradle
Reset
Receiver
Power Dock
Power
On/Off
Data Cable
Connection
SD slot
AC Power
Connection
AC Power
Connection
Pull-Out
Stand
Front view
Back view
Power status
Power
pigtail
Link status
Power/Pair
button
Light sensor
Microphone
What the lights mean
Light
Power
status
6
State
Antenna
connector
What it means
On
(Red)
The camera is on.
Off
The camera is off.
Light
Link
status
State
What it means
Flashing
The camera is in pairing mode.
On
(Green)
The camera is connected to the receiver.
Off
The camera is in standby.
Setting Up the Equipment
Set Up the Receiver
1. If you are using the receiver as a stand-alone unit, flip out the stand on the back of the receiver,
and extend the antenna. Connect an AC adapter to the power input on the side of the receiver.
If you are using the receiver in the cradle, insert the receiver into the cradle and connect an AC
adapter to the input on the back of the cradle.
2. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.
3. Press and hold the Power button on the top of the receiver for 3 - 4 seconds to power it up.
4. The receiver displays the Uniden Welcome screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the cameras are powered up.
Mount the Camera Stand
General Guidelines
The Uniden Guardian GC45 cameras included with your receiver are weatherproof and have an
IP66 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be
submerged underwater.
Although the cameras can be exposed directly to the rain, it is recommended that, if they are used
outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater
drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared
LEDs used for night vision, thus causing lower quality video.
7
Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the
infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.
Placement Considerations
Consider the following when placing cameras:
••
The clearest line-of-sight between the camera and monitor is best.
——
Walls, especially brick and concrete, shorten the transmission distance.
——
Placement next to windows allows better transmission.
••
Optimized motion detection range is 6 - 18 feet for the GC45 camera. The farther away an object
is, the less accurate the motion detection.
••
Avoid having a direct light source in the view of the camera, including street lights, ceiling or
floor lamps, spotlights in the driveway, etc.
••
Rainfall, pool water ripples/reflections, tree/shrub leaves blowing in the wind - and the shadows
they create - can generate motion detection false alarms.
You can mount the camera with the stand on the bottom (on a wall or table-top) or on the top (on
the ceiling). When you are positioning the camera, you might want to bring the receiver along; it’s
much easier to get the camera into the right position when you have the display handy.
1. Hold the base of the camera stand where you want to mount it and mark the location of the
screw holes.
2. Use the included screws and anchors to attach the base to the wall or ceiling.
3. Before attaching the camera, tug gently on the stand to make sure it is securely in place.
8
Attach the camera
Tighten the brace against
the camera to
secure it
in place.
2.
3.
4.
5.
6.
1
Attach the camera
to the mounting
screw and turn it
to the desired
direction.
1.For each camera,
2
attach the camera
bracket to the
mounting screw.
You can attach the
3
stand to the top or
the
the bottom of the Loosen
wingnut to
camera as needed. unlock the
Adjust the post to
4 the correct angle,
mounting
Tighten it a few
then tighten the
post.
turns, then turn
wingnut to lock the
the camera to face
post into place.
the direction you
want.
Tighten the camera brace up against the camera to secure it into place.
Unlock the mounting post by turning the wingnut to the left a few turns.
Set the mounting post to the correct angle, then tighten the wingnut until the post is locked
into place.
Antenna
Attach the antenna to the rear of the camera.
Connect one end of an AC adapter to the camera’s
power pigtail and plug the other end into a 120 volt
AC (standard indoor) power outlet. (If necessary,
connect the extension cord to the camera’s pigtail
Power/
and connect the AC adapter to the extension cord.)
Be sure the power plug and the connector are
tightly twisted together to avoid water leaking in.
Pair button
7. Make sure the Power status light turns on. If it doesn’t, try reconnecting the AC adapter, and
make sure the power outlet isn’t controlled by a wall switch.
9
8. You should now have video on your Live screen.
Setting Up Your System
You can now set your cameras and system to your preferred settings.
Camera Settings
••
Brightness (“Uniden Guardian Settings Screen” on page 18)
••
Motion Detection (“Uniden Guardian Settings Screen” on page 18)
••
Schedule Recordings (“Schedule Record” on page 23)
System Settings
••
Power Saving (“Power Saving” on page 29)
••
Screen Auto Lock (“Screen Auto Lock” on page 30)
••
Time (“Time” on page 31)
••
Security code (“Security Code” on page 25)
••
Language (default language is English; “Changing the Language” on page 34)
Recording Settings
••
Motion Detection (“Motion Detection” on page 22)
••
Schedule Recordings (“Schedule Record” on page 23)
10
Uniden Guardian Software Operation Overview
Your receiver’s Uniden Guardian software operates through a series of screens that let you choose
groups of operations. For example, when you tap on the camera icon in the Pop-up menus, you
can set how you want the main viewing screen - called the Live screen - to display images from the
paired cameras. You can scan between cameras, show all cameras on a single screen (Quad view),
or only display a specific camera.
The Live screen lets you view the camera transmissions. It also lets you set up your screen display
and make adjustments to it. Icons on the screen itself let you monitor power and camera status.
The Uniden Guardian system always defaults to the Live screen in Quad mode after being
idle for 2 minutes while in any other system screen. This default ensures that the system is
ready to record video even if you forget to return to the Live screen. The system can only
start a recording while in Live screen mode.
The operation of the G4 or G7 monitor is identical. The only difference between the two
systems is the physical size of the monitor/receiver and how you extend the antenna.
Live Screen
SD card
status
Battery
status
Record
status
Camera number/
Signal strength
Pop up
menu tab
Pop up
menus
11
What the icons Mean
Icon
What it does
Camera Mode
Select how you want the Live screen to display camera input:
•Scan between cameras (5 seconds)
•Quad view (all paired cameras display)
•Full view (1 camera displays on full screen)
Volume
Adjust the volume level.
Uniden Guardian
System Settings
Access the Uniden Guardian Software Operation screens or view recorded
events.
SD Capacity
Indicates memory capacity remaining.
Battery Capacity
Displays battery capacity. This graphic shows battery at nearly full.
Camera Number
Displays the camera number and signal strength through the status lines to
the left of the number.
Record Status
12
Tap to start or stop recording for that camera
•Steady on - Not recording
•Flashing - Recording
Icon
What it does
INTERNET
Connects your system to the Internet.
Motion
System indicates motion detection recording in progress.
Scheduled
System indicates scheduled recording in progress.
Pop up Menu Tab
Opens and closes the pop up menu display.
NO SD CARD
INDICATOR
Displays red when the SD card is not present or is damaged.
Changing How the Live Screen Displays
The Live screen displays in 2 views - Quad View or Full View. Quad View divides the screen’s image
area into 4 quadrants and displays camera video in each quadrant. If less than 4 cameras are on,
only those cameras’ video will display on the Live screen.
13
Full view displays a single camera’s video on the entire screen. If you are in Quad View, tap on the
camera quadrant you want to expand to Full View. Tap on that image to return to Quad View.
Using the PentaZoom™ Feature
While in any camera’s full screen view, selecting the + icon on the right side of the screen enables
the PentaZoom feature. PentaZoom lets you select from 5 sections of the video image. Tap on a
section and it will digitally zoom to full screen. Tap on the video to return to full screen mode or to
go back to the PentaZoom screen, tap .
14
Using Your System
Recording Live Video
1. On the Live screen, tap
for the camera to begin recording.
2. Tap it again to stop recording.
You can record from all cameras at the same time.
Playing Back Recorded Video
From the pop-up menus, tap
the following icons as they
appear on the screens:

The Record List screen displays.

1. Tap on the highlighted day containing the recording you want to view or on a specific camera
to only view that camera’s recordings. The Record List screen displays those recordings listed in
a folder.
If you tap on a day that is not highlighted, a folder displays with no recordings listed.
2. Tap on the recording you want to view. It displays on the screen.
3. Tap on any area of the screen that does not have control icons to bring up the playback
progress bar. Tap that area again to close it.
4. While playback progress is visible, you can fast forward/rewind by dragging the playback bar
forwards or backwards.
5. When playback ends, tap to return to the Record List.
You can press the double arrow to move to the next or previous video.
15
Adding New Cameras
Your receiver supports a total of four active cameras at a time. When you add a camera, you
have to pair it to the receiver (that is, you have “introduce” the camera and receiver so they can
communicate).
Some things to know about pairing cameras
••
If a camera is already assigned to the selected channel, the receiver overwrites that camera link
with the new one.
••
Only pair one camera at a time! The receiver links to the first camera it detects. If two or more
cameras are in pairing mode, you can’t control which camera the receiver will detect first.
Pair Camera
1. From the Pairing Camera screen (see “Pairing” on page 20), tap the camera image you want to
pair. A processing icon displays for a 60 second countdown.
2. During the 60 second countdown, quickly press and release the Pairing button on that
camera’s power cord (see ”Pairing” on page 20).
3. The system automatically adjusts the Camera On screen accordingly.
4. If you have any trouble, consult the the table on page 17.
16
Troubleshooting camera Pairing
Consult the following table for camera pairing troubleshooting suggestions:
If...
Try...
the camera’s signal status icon shows no bars
•making sure the camera is plugged in and the red
LED is on.
•making sure that the camera’s antenna is
attached and the receiver’s antenna is extended.
•making sure the camera is paired to the correct
channel.
•re-pairing the camera and receiver.
the camera’s signal status icon shows one or
two bars or the video quality is poor
See “General Guidelines” on page 7 for tips on
improving video quality.
the camera won’t pair with the receiver
•making sure the camera is plugged in and the red
LED is on.
•pressing and releasing the pairing button quickly.
Do not press and hold the pairing button.
17
Uniden Guardian Screen Descriptions
Overview
This section describes the Uniden Guardian screens in detail. It provides a path to the screen being
viewed.
Uniden Guardian Settings Screen
From the pop-up menu, tap the
following icons as they appear
on the screens:

This screen should display:

The Uniden Guardian Settings screen highlights the Camera Setup option as the default.
Main Screen
Camera Setup
Recorder Setup
Sub Screens
Pairing
Camera on
Brightness
Motion Detection
Schedule Record
18
What it Does
Pairs new cameras to the receiver.
Makes the cameras visible to the monitor.
Brightens or darkens the video of that camera.
Records when something moves in front of the
camera. Continues recording for 2 minutes. Motion
detection is on by default.
Set up a schedule for pre-determined recording times
and lengths.
Main Screen
Network Setup
Sub Screens
Internet Setup
Security Code
Network Information
Alarm Setup
System Setup
Period
Melody
Power Saving
Screen Auto Lock
Time
Format Storage
System Upgrade
Language
Quick Tips
NA
What it Does
Select the type of internet connection to be used. (DHCP
is most common.)
Set a security code for remote access.
Displays information about your network and the receiver’s
unique UID number.
Set a length of time for the alarm to sound.
Select a melody to play for the alarm.
Temporarily turns off the LCD after the system is idle for 2
minutes to conserve power.
Locks the screen from further activity until the screen is
unlocked.
•Clock Alarm. Set an alarm.
•Time Setting. Set the current time.
•Timer. Time countdown.
Formats/erases all the data on the SD card.
Upgrades the receiver firmware.
Changes default language setting for the receiver (English,
French or Spanish).
Provides a list of 10 common questions.
19
Camera Setup Screen
Pairing
Your cameras are paired to the receiver at the factory to
channels 1 and 2. When you add a new camera to your
system, you have to pair it to the receiver (that is, you
have “introduce” the camera and receiver so they can
communicate).
Some things to know about pairing cameras:
••
If a camera is already assigned to the selected channel, the receiver overwrites that camera link
with the new one.
••
Only pair one camera at a time! The receiver links to the first camera it detects. If two or more
cameras are in pairing mode, you can’t control which camera the receiver will detect first.
From the pop-up menus, tap
the following icons as they
appear on the screens:



This screen should display:

1. Tap the camera image you want to pair. A processing icon displays for a 60 second countdown.
2. Press and release the Pairing button on that camera’s power cord. The 60 second countdown
will end when the pairing process is complete.
3. The system will automatically adjust the Camera On screen.
Use this procedure to move a camera from one channel to a different channel.
20
Camera On
When you add a camera to your system, pair up the camera with the receiver and the system will
automatically turn it on. An X indicates a camera that is turned off; a check mark indicates the
camera is turned on.
From the pop-up menu, tap the
following icons as they appear
on the screens:



This screen should display:

1. Tap the camera you want to turn on.
2. A check mark replaces the X under the camera.
3. To turn a camera off, tap the camera icon. An X replaces the checkmark and indicates the
camera is turned off.
Although the camera is turned off, it is still powered. The receiver will not receive video
signals from that camera.
21
Brightness
From the pop-up menu, tap the
following icons as they appear
on the screens:


This screen should display:


Tap the camera whose brightness level you want to change. The default brightness is 0, and the
range is from -2 through 2.
Recorder Setup Screen
Use the Recorder Setup screen to select between
Motion Detection and Schedule Record.
Select Motion Detection.
See “Motion Detection” on page 22 below.
Motion Detection
From the pop-up menus, tap
the following icons as they
appear on the screens:

22


This screen should display:

1. Each camera’s motion detection sensitivity can be set independently. You can set the motion
detection level to Off, Low, or High. Tap on the camera to cycle through these choices.
2. Tap to return to the main Motion Detection screen.
The Motion Detection default setting is to Low. The system records for 2 minutes when
motion is detected.
Schedule Record
You can schedule up to 5 recording sessions. You are limited to the size of the SD card for how long
a total recording time you have. These recording sessions must begin and end within a single 24hour period. They cannot cross into the next day.
From the pop-up menus, tap
the following icons as they
appear on the screens:



This screen should display:

1. Tap the camera number you want to record (1 - 4). You can select up to all 4 cameras to record.
2. Set the recording start time. Tap the hour and number boxes separately and use the UP and
DOWN arrows to scroll through the times.
3. Tap the AM/PM block to toggle between them.
4. Tap on the blank Date box. The Recorder Setup
calendar screen displays.
5. Tap on the date you want the recording.
The previous screen displays.
23
6. Set up the recording and then tap SAVE. You can select another recording session to schedule,
return the previous screen, or return to the Live screen.
Scheduled recordings are broken up into 15 minute file sizes. For example, if you record a 50
minute event, you will have three 15-minute recordings plus one 5-minute recording.
Clear a Scheduled Recording
1. Access the Schedule Record screen.
2. Tap recording you want to clear (1-5). The screen displays the settings for that schedule.
3. Tap CLEAR. The screen resets to the default values for that recording slot.
Network Setup Screen
The Network Setup screen allows you to select your internet connection type and security code. You
can also display system default configuration.
From the pop-up menu, tap the following icons
as they appear on the screens:

24


This screen should display:
Internet Setup
1. Tap Internet Setup icon to display the Internet Setup screen.
2. Tap on your selection and fill in the fields
requested. Tap OK.
Selection
Static IP
DHCP
Fields
•IP Address
•Subnet Mask
•Default Gateway
•DNS Server
None
3. Tap OK at the system reboot prompt. The Network Setup screen displays.
DCHP is the most common connection. Your router will automatically assign an IP address
to your Uniden Guardian system. Static IP is for those that have the ability to specify an IP
address for the Uniden Guardian system.
Security Code
Set up your security code to limit who can have access to the system from a remote location.
1. Tap Security Code icon to display the Security Code screen.
25
2. If you have not entered a security code, you can enter it here. If you have previously entered a
security code, your current security code displays.
The default security code is set to 123456. We recommend that you change this code to
something you will remember. You will need the code to access your video from a remote
device such as a smart phone or PC.
3. Tap on the Change Code field. A keyboard screen displays.
4. Enter your security code. You can switch the keyboard from alphabetical characters to
numbers/symbols and back by tapping the field to the left of the space bar. Tap Return. The
Security Code screen displays again.
You must enter a security code to monitor your video from a PC or other device.
5. Tap OK on the system reboot prompt. The Network Setup screen displays.
6. Turn your Uniden Guardian monitor off then back on for the security code change to take
effect.
26
Network Information Screen
1. Tap the Network Information icon to display the Network Information screen.
2. Tap the arrow to return to the previous screen.
The UID is a unique code specific to your monitor and is required (along with the security code)
to gain remote access to your cameras over the internet. The information in the DHCP setting is
assigned to your monitor from your home router.
Alarm Setup Screen
From the Alarm Setup screen, you can:
••
Set the length of time the alarm sounds.
••
Select a melody for the alarm.
27
Period Screen
This selection allows you to select the length of time the alarm will sound for the alarm clock.
1. Tap Period. The Change Siren Duration screen displays.
2. Tap the duration you want the siren to last (2, 10, or 30 seconds) or tap None to turn sirens off.
3. Tap to return to the previous screen.
Melody
This selection allows you to select a melody for the siren.
1. Tap Melody. The Change Siren Melody screen displays.
28
2. A check mark appears on the melody you tap and the receiver briefly plays a sample of the
selected melody.
3. Tap the BACK arrow to return to the previous screen.
System Setup Screen
Power Saving
When you turn on Power Saving mode, the monitor goes into sleep mode (LCD turns off) after it is
idle for 2 minutes. Press the Power button once to reactivate the monitor. (Default = Disable).
If a motion detection event or scheduled recording begins, the LCD turns back on.
1. Tap Power Saving icon, then Enable to activate Power Saving mode (Default = Disable).
29
2. A check mark appears on your selection.
3. Tap to return to the previous screen.
Screen Auto Lock
When you turn on Auto Lock mode, the monitor will automatically enter screen lock mode after it
has been idle for 2 minutes. Auto Lock disables the touchscreen and removes the icons from the
display.
When the auto-lock feature has been enabled and your Live screen is locked, just tap the power
button once to unlock the screen and return to normal touch screen operation. At any time from
the Live screen, you can manually lock the system by tapping the power button, whether or not the
auto-lock feature has been enabled.
1. Tap Screen Auto Lock. The Activate Touch Screen Operation Auto-lock screen displays.
2. Tap your selection; a check mark displays.
3. Tap the BACK arrow to return to the previous screen.
30
Time
The Time screen lets you set up clock alarms, set the system time, and set a timer.
From the pop-up menu, tap the
The following screen displays:
following icons as they appear
on the screens:




Clock Alarm
This feature operates as an independent alarm clock. It does not affect the operation of live video or
recording video.
1. Tap
to display the Clock Alarm screen.
2. Tap on an alarm button (total of 5 to select from).
3. Tap on the hour block. The UP/DOWN arrows move to the hour block. Set the hour.
31
4. Tap on the minute block. The UP/DOWN arrows move to the minute block. Set the minute.
5. Tap on AM/PM to toggle between the two.
6. Tap SAVE when you are finished.
Time Setting
This screen contains fields to set the Month, Day, Year, Hour, Minute, and AM/PM.
1. Tap
to display the Time Setting screen.
2. Tap on each field to set it. The UP/DOWN arrows shift to that field. Use UP/DOWN to set the field.
3. Tap on the AM/PM block to switch between the two.
4. Tap SAVE when you are finished.
It is important to set the correct time to ensure that the recorded video files and the
scheduled record times are correct.
32
Timer
This feature operates as an independent timer. It does not affect the operation of live video or
recording video.
to display the Timer screen.
1. Tap
2. Tap on each field to set it. The UP/DOWN arrows shift to that field. Use UP/DOWN to set the field.
3. Tap START to begin the timer. When the timer reaches 00:00, an alarm beeps until you tap OK.
Format Storage
When using an SD card other than the one provided, it is highly recommended that you format the
card using these procedures. Formatting any SD card deletes all files on that card.
From the pop-up menu, tap the
following icons as they appear
on the screens:



The Format Storage screen displays:

The Uniden Guardian System supports up to a 32 GB SD Card.
33
1. Tap on START; a warning statement displays.
2. Tap OK to proceed to format storage or tap CANCEL to discontinue and return to the previous
screen.
3. The system indicates success or failure.
System Upgrade
To upgrade the Uniden Guardian firmware, you will need to download the file from the Uniden
Video portal site (www.unidenvideo.com) or from the Uniden website (www.uniden.com) to your
computer. This file must then be transferred to the root directory of the SD card used in your
Uniden Guardian system.
From the pop-up menu, tap the
following icons as they appear
on the screens:



This screen should display:

Language
Changing the Language
English is the default language. When you change languages, all system settings default to the
original factory settings. You will have to reenter any specialized settings.
34
From the pop up menus, tap
the following icons as they
appear on the screens:



This screen should display:

1. Select a language to change to that language. The Restore Default Settings screen displays.
2. Tap OK to continue with the language reset. The system will reboot in about 5 seconds. If you
do not want to reset the language, tap CANCEL and return to the previous screen.
Changing the language will reboot the system and ask you to recalibrate the touch screen.
Follow the instructions on the screen.
Quick Tips
The Quick Tips screen provides more detail into 10 common areas. Tap on a subject to display the
information.
35
Remote Access
Overview
Uniden Guardian lets you view live video from your Windows® PC, an iPhone®, iPad®, or AndroidTM
smartphone or tablet. Free apps are available through the iTunes® App Store or the Android Market.
This system uses P2P remote access technology and does not require configuring your router, port
forwarding or a remote DDNS service.
You must set up a free portal account to remotely view your system. Multiple users can access live
video at the same time as long as they have the User ID (UID) code and security code.
The number of remote viewers is determined by the amount of “available upload
bandwidth” on your home network. Each remote viewer requires ~350kbps of bandwidth
on the network.
System Requirements
••
Microsoft® Windows XP, Vista, or Windows 7
••
Internet Explorer® 8 or greater.
••
iPhone® or
••
iPad® or
••
AndroidTM smartphone or tablet
Connecting to the Internet
The Uniden Guardian cradle charges your monitor as well as provides an internet connection.
When you are connected to the internet, live video will not display on the monitor.
For this procedure, the AC adapter must be connected to the cradle and not to the monitor.
Reconnect the AC adapter if necessary.
1. Connect one end of the Ethernet cable into the back of the cradle.
36
2. Connect the other end into your primary router (typically, the router from your service
provider).
3. Place cradle maximum distance away from your router.
4. Insert the monitor into the cradle. A screen asks if you want to connect to the internet or to
only charge the monitor.
5. Tap Connect. The Live screen goes blank. You can now view live video through your Portal
account.
Connecting to the Intranet (Home network)
When the monitor is placed in the cradle and “charge only” is selected, you can still access your live
video from a PC or smart phone as long as those devices are also connected to the same network
as the monitor. For example your smart phone is connected to your home network via WiFi. In this
case, live video will still be displayed on the monitor as well as on the smart phone.
Setting up a Portal Account
You need a Uniden portal account to gain remote access to your Uniden Guardian system live
video.
Be sure you have set up your security code. By default, the security code is 123456. We
highly recommend you change this on the monitor. You will need them for setting up a
portal account.
1. Go to http://www.unidenvideo.com.
2. Click Add New Subscription.
Legal Agreement displays.
3. Read and agree to the Legal
Agreement.
37
The Account Setup screen displays
4. Enter Account Name (1).
5. Enter a Password (2).
6. Enter it again to Verify Password
(3).
7. Complete all required fields (4).
8. Click in the check box (5)
to receive information on
firmware updates and news. We
recommend you check this box
to receive updates.
9. Click in the check box (6) to
receive information on special
offers from Uniden.
10. Click Submit (7). The New Account
Created screen displays.
11. Click Continue. The Video System
Registration screen appears.
12. Provide a Device Nickname (1).
13. Select your retailer from the
list (2).
38
Enter The Uid Code
After selecting your Uniden Guardian system, you must enter the User ID (UID) code. This UID
code can be found on the back of your handheld monitor behind the kickstand. It is the characters
underneath the barcode.
You also can find the UID code on
the Network Information screen.
1. Click the radio button by your
system (3)
2. Enter the UID code in all capital letters (4).
3. Click Continue (5) .
Once your account setup is complete, select
the View Now link.
In order to view live video from your PC, you
must download and install the OCX plug in. Click on the link near the bottom of the page and it
will ask you to Run or Save the file. If you choose to Save, remember where the download location
on your computer. After the download is complete, find that file and click on it to install. After the
installation is complete, return to the View Now page on the Portal. On this page, you will see the
UID code from your device that you entered during account setup. There is also a space to enter a
Security Code. It must match your monitor security code that you previously set up.
Enter Security Code
By default, the Security Code is set to 123456;
we recommend that you change it.
1. Enter your own unique security code.
2. Click START.
The security code you enter on the
Uniden Video Portal and the Apps
39
must match the security code you entered on the device. Anytime you change the security
code on the device, you must make the corresponding change on the Portal or Apps.
Record Video
The Portal lets you record live video
and save it to your PC.
1. Click Record to start recording.
2. Click Stop Record to stop recording.
Take A Snapshot
The Portal lets you take snapshots of
video and save to your PC.
Click Snapshot.
You specify the save location for all
video and snapshots. Select Save and
then browse to the location where you
want to save them.
Downloading Apps
AndroidTM
You can use a Google® AndroidTM smart
phone or tablet with your Uniden
Guardian System to remotely connect to
and view live camera video. Follow these
steps to download, add, and use the app.
1. From your AndroidTM smart phone
or tablet device search the Android
Market for Uniden Guardian.
40
2. Download and install this app to your
device.
3. Launch the app; select Add to add
your system information to the app.
4. Enter a name for your system in the
System Name field.
5. Enter the same UID code from your
Uniden Guardian monitor in the
Device UID field.
6. Enter the same security code that you
set on your Uniden Guardian monitor
in the Security Code field.
7. Select Save.
8. Select the system you wish to view.
View Video
1. Select a camera.
2. Tap Start to view video.
3. View video.
4. Tap Stop to stop the video.
You can tap the video window while
viewing to enlarge it and go to horizontal
view.
41
You can select another camera to view
from the menu.
Select Snapshot to take a still camera
picture of your video and store it on your
AndroidTM smart phone or tablet.
iPhone®
In a similar fashion to the Android smart
phone, you can use the Apple® iPhone®
smart phone or iPad® tablet with your
Uniden Guardian System to remotely
connect to and view camera videos.
Follow these steps to download the
Uniden Guardian iPhone® App and set it
up to work with your Uniden Guardian
system.
42
1. From your iPhone® or iPad®, go to
the iTunes® App Store and search
for Uniden Guardian.
2. Download and install this App to
your device.
3. Launch the app; select Settings then
ADD to add your system information
to the App.
4. Enter a name for your system in the
System Name field.
5. Enter the same UID code from your
Uniden Guardian monitor in the
Device UID field.
6. Enter the same security code that
you set on your Uniden Guardian
monitor in the Security Code field.
7. Tap Save.
When you tap Save, the video
streams automatically with
Camera 1 selected by default.
43
You can tap to enlarge a video while
viewing it and go to horizontal view.
Select Snapshot to take a still
camera picture of your video and
store it on your iPhone® or iPad®
You can select another camera to
view from the menu.
44
Maintaining Your System
Upgrading your Uniden Guardian Firmware
Check your system firmware version on the Network Information screen.
Go to www.unidenvideo.com to check the current firmware level. Compare it to your system
firmware level. If you need to update your Uniden Guardian firmware, download the most current
firmware version to your system’s SD card and then upload that firmware to the receiver.
1.
2.
3.
4.
5.
6.
Eject the SD card from the receiver.
Insert the SD card into your PC.
Go to www.unidenvideo.com.
Copy the current firmware to the SD card.
Remove the SD card and reinsert it into the receiver.
Upgrade the firmware (see “System Upgrade” on page 34).
Taking Care of Your Hardware
Receiver
As you use your monitor keep the screen clean by wiping it with a microfiber cloth to remove
fingerprints, dust, etc.
Cameras
When dust and grime builds up on the camera lens and glass, it affects night vision capability. The
infrared light reflects off of the dust and grime, limiting the camera’s “vision.” Use a microfiber cloth
to regularly clean the cameras or when night vision video is cloudy or unclear.
45
Solving Problems
If you have any trouble with your system, try these simple steps. If you are still having a problem
with your camera, check the manual that came with your camera. If you still have a question, call
our Customer Care Line; see “Customer Care” on page 2.
If…
Try..
The motion sensor won’t
respond to movement.
•Increasing the sensitivity of the motion sensor (see page 20).
•Checking the settings on the Record screen (see page 18).
The motion sensor goes off
when there’s nothing there.
•Decreasing the sensitivity of the motion sensor (see page 20).
•Refer to “Placement Considerations” on page 8.
I can’t play my video clips
in another program
•The video files play with a Quicktime® player. Download this free
player from www.apple.com.
•Video will play in players such as Windows Media® Player if an
H.264 CODEC plug-in is installed.
I schedule a recording,
save the schedule, and the
recording does not happen
at the scheduled time.
•Ensure that the system time is set to the current time.
•Make sure that the SD card is inserted into the receiver and there is
still memory available on that card.
The camera’s signal status
icon shows no bars
•making sure the camera is plugged in and the red LED is on.
•making sure the camera is paired to the correct channel
•re-pairing the camera and receiver
•moving the camera closer to the monitor; it might be out of range.
•make sure the camera setting is turned on in Camera Setup (see
“Camera On” on page 21).
The camera’s signal status
icon shows one or two bars
or the video quality is poor
See “General Guidelines” on page 7 for tips on improving video
quality.
46
If…
Try..
The camera won’t pair with
the receiver
•making sure the camera is plugged in and the red LED is on.
•pressing and releasing the pairing button quickly. Do not press and
hold the pairing button.
When I power up my
receiver and cameras for
the first time, they seem
to be on but there is no
picture on the screen
•If the Power Saving feature has been turned on, the monitor’s LCD
screen will power off. Tap the power button to turn the LCD back on.
I have my regular Live
screen but there are no
icons.
•tapping the Power button on top of the receiver. Screen lock may be
on and tapping the Power button will unlock the screen.
47
Additional Information
Product Specifications
Radio Frequency Transceiver
RF Frequency
2.4 GHz
Modulation
GFSK
Spread spectrum
Frequency Hopping
Anti Interference
Clean Channel Dynamic Select
Selectable camera channel
4
Data rate
2 Mbps
Transmitting range
500 feet (152 meters) in an open area (line of sight)
Image Specification
Output Image resolution
480 X 272, 320 x 240 (QVGA)
Image processing
H.264
Exposure
Auto
White balance
Auto
System Specifications Camera
Receiver
Weight
13 oz (370 g)
G455: 7 oz (198 g)
G755: 1lb 1 oz (468 g)
Dimension
5.94 x 2.9 x 1.9” (151
x 74 x 49 mm)
5 x 3 x 0.9” (132 x 79
x 24 mm)
7.2 x 5 x 1.1” (184 x 128
x 28 mm)
Operating temperature
+14° F (-10° C) to 122° F (+50° C)
Battery charging temp.
48
0° C (32° F) to +45° C (113° F)
System Specifications Camera
Receiver
Input voltage
100-240 V AC @ 60 or 50 Hz
Operating voltage
5 V DC @ 1 Amp
Power consumption
650 mA max
Low light solution
20 IR LEDs, 1 Low
light sensor
Low light sensitivity
1-8 lux
Picture sensor
OV7725 1/4’ Color
CMOS
Lens
F3.6mm H:55 V:44
Lithium-Polymer Battery Warning
••
This equipment contains a rechargeable lithium-polymer battery.
••
Do not charge the battery in temperatures below 32° F (0° C) or higher than 113° F (45° C).
••
Do not open or mutilate the battery.
••
The rechargeable batteries contained in this equipment may explode if disposed of in a fire.
••
Do not short-circuit the battery.
••
Do not charge the rechargeable battery pack used in this equipment with any charger other
than the one designed to charge this battery pack as specified in the owner’s manual. Using
another charger may damage the battery pack or cause the battery pack to explode.
CAUTION! Rechargeable Batteries Must Be Recycled or Disposed of Properly.
Recycling and Disposal Information
••
Do not dispose of electronic devices or any of their components (especially batteries and LCD displays) in
your municipal trash collection.
49
••
Consult your local waste management authority or a recycling organization like Earth911.com to find an
electronics recycling facility in your area.
••
If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for
recycling.
FCC Compliance Information
Part 15 Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to
Part 15 of the FCC rules and ETSI (EN) 300328. These limits are designed to provide reasonable protection
against harmful interference in residential installations. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television equipment reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
••
Reorient or relocate the receiving antenna.
••
Move the equipment away from the receiver.
••
Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
••
Consult the dealer or an experienced radio/television technician for additional suggestions.
CAUTION! Any changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
RF Exposure Information
The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm
(7.9”) from all persons and must not be collocated or operating in conjunction with any other antenna or
transmitter.
50
IC Compliance Information
Radio Equipment Notice
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met. Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device. “Privacy of communications may not be ensured when using this device”.
CE Compliance Information
Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage Directive (73/23/EEC);
R&TTE(1999/5/EC) issued by the Commission of the European Community. Compliance with these directives
implies conformity to the following European Norms:
••
EMC: EN 301 489
••
LVD: EN 60950
••
Radio: EN 300 328
One-year Limited Warranty
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: Uniden America Corporation (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one
year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship
with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months
after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as
reasonable or necessary, (B) modified, altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than
an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any
conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or
programmed by anyone other than as detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while
this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit & return it to
you without charge for parts, service, or any other cost (except shipping & handling) incurred by warrantor
or its representatives in connection with the performance of this warranty. Warrantor, at its option, may
replace the unit with a new or refurbished unit.
51
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE
PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so
the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other rights which vary
from state to state. This warranty is void outside the United States of America & Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the
owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its
original packaging). Disconnect the battery from the Product & separately secure the battery in its own
separate packaging within the shipping carton. The Product should include all parts & accessories originally
packaged with the Product. Include evidence of original purchase & a note describing the defect that has
caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd. Fort Worth, TX 76155
(800) 808-8058 during regular business hours (CST)
(See www.uniden.com for current hours of operation.)
© 2012 Uniden
America Corporation
All rights reserved
Printed in China
52