Yamaha HTR-5960BL Owner`s manual

HTR-5960_U_cv.fm Page 1 Friday, December 2, 2005 1:57 PM
U
HTR-5960
HTR-5960
AV Receiver
© 2006
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
OWNER’S MANUAL
Printed in Malaysia
WG73830
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
•
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1
2
3
4
5
6
7
8
9
i
11
Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions
should be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to
overturn.
12
13
14
15
16
17
18
19
Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
IMPORTANT SAFETY INSTRUCTIONS
d)
20
21
22
23
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f)
When the product exhibits a distinct change in performance - this indicates a need for service.
Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
Safety Check – Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Wall or Ceiling Mounting – This unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
24
Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
MAST
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC – NATIONAL ELECTRICAL CODE
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions found
in the users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning this unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
ii
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry, clean
place – away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at
least 30 cm on the top, 20 cm on the left and right, and 20
cm on the back of this unit.
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in a environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping
or splashing. On the top of this unit, do not place:
– other components, as they may cause damage and/or
discoloration on the surface of this unit.
– burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
Do not plug in this unit to a wall outlet until all connections
are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cord.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and
may cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage
resulting from use of this unit with a voltage other than
specified.
To prevent damage by lightning, keep the power cable and
outdoor antennas disconnected from a wall outlet or this unit
during a lightning storm.
14
15
16
17
18
Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reasons.
When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
Install this unit near the AC wall outlet where the power
cable plug can be reached easily.
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
Before moving this unit, press STANDBY/ON to set this
unit to the standby mode, and then disconnect the power
cable from the AC wall outlet.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if this unit itself is set to the standby mode. In this
state, this unit is designed to consume a very small
quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear panel of this
unit. Retain this Owner’s Manual in a safe place for
future reference.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries
Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
iii
CONTENTS
FEATURES............................................................. 2
GETTING STARTED............................................ 3
Supplied accessories .................................................. 3
Installing batteries in the remote control ................... 3
CONTROLS AND FUNCTIONS ......................... 4
Enjoying multi-channel sources in surround ........... 48
Enjoying 2-channel sources in surround.................. 49
Using Virtual CINEMA DSP .................................. 50
RECORDING........................................................51
FM/AM TUNING..................................................52
Automatic tuning ..................................................... 52
Manual tuning.......................................................... 53
Automatic preset tuning........................................... 54
Manual preset tuning ............................................... 55
Selecting preset stations........................................... 56
Exchanging preset stations ...................................... 57
PREPARATION
Front panel ................................................................. 4
Remote control........................................................... 6
Front panel display .................................................... 9
Rear panel ................................................................ 11
ENJOYING SURROUND SOUND .....................48
INTRODUCTION
INTRODUCTION
XM® SATELLITE RADIO TUNING.................59
PREPARATION
CONNECTIONS .................................................. 12
BASIC OPERATION
PLAYBACK.......................................................... 38
USING AUDIO FEATURES............................... 40
USING VIDEO FEATURES ............................... 46
Displaying the input source information ................. 46
Selecting the OSD mode.......................................... 47
Playing video sources in the background ................ 47
Selecting sound field programs ............................... 70
Sound field program descriptions............................ 71
Changing sound field parameter settings................. 73
Sound field program speaker layouts ...................... 79
ADVANCED OPERATION
SET MENU ............................................................83
Using SET MENU................................................... 85
1 SOUND MENU.................................................... 86
2 INPUT MENU...................................................... 92
3 OPTION MENU................................................... 94
ADVANCED SETUP ............................................97
REMOTE CONTROL FEATURES ...................99
Controlling this unit, a TV,
or other components ............................................ 99
Setting the remote control code ............................. 101
Setting library codes .............................................. 102
Resetting all remote control codes......................... 103
USING iPod® .......................................................104
Setting the remote control code ............................. 104
Controlling iPod .................................................... 104
ADDITIONAL
INFORMATION
Using SILENT CINEMA ........................................ 40
Muting the audio output........................................... 40
Selecting the night listening mode........................... 40
Selecting the input mode ......................................... 41
Using the sleep timer ............................................... 41
Adjusting the speaker level...................................... 42
Selecting the Compressed Music
Enhancer mode .................................................... 43
Selecting the MULTI CH INPUT component......... 44
Enjoying multi-channel sources
in 2-channel stereo............................................... 45
Enjoying unprocessed input sources........................ 45
Enjoying pure hi-fi stereo sound.............................. 45
SOUND FIELD PROGRAMS .............................70
ADVANCED
OPERATION
Connecting the optimizer microphone..................... 32
Using AUTO SETUP .............................................. 33
SOUND FIELD PROGRAMS
SOUND FIELD
PROGRAMS
AUTO SETUP....................................................... 32
BASIC
OPERATION
Placing speakers....................................................... 12
Connecting speakers ................................................ 13
Information on jacks and cable plugs ...................... 17
Audio and video signal flow.................................... 18
Connecting a TV...................................................... 19
Connecting a DVD player, a DVD recorder,
a VCR or an STB................................................. 20
Connecting a CD player, an MD player,
a tape deck or a turntable..................................... 23
Connecting a YAMAHA iPod universal dock ........ 24
Connecting an external amplifier............................. 25
Connecting a multi-format player
or an external decoder ......................................... 26
Connecting a game console, a video camera
or a portable audio player .................................... 27
Connecting the FM and AM antennas ..................... 28
Connecting the power cable..................................... 29
Setting the speaker impedance................................. 30
Turning on this unit or setting it
to the standby mode............................................. 31
Connecting the XM Connect-and-Play
digital antenna accessory..................................... 59
XM Satellite Radio controls and functions.............. 60
Activating XM Satellite Radio ................................ 61
Basic XM Satellite Radio operations....................... 62
Selecting the XM Satellite Radio search mode ....... 63
Setting the XM Satellite Radio preset channels ...... 67
Displaying the XM Satellite Radio information...... 68
RESETTING THE SYSTEM.............................106
ADDITIONAL INFORMATION
TROUBLESHOOTING .....................................107
GLOSSARY.........................................................114
Audio information ................................................. 114
Video information.................................................. 115
Sound field program information .......................... 116
SPECIFICATIONS.............................................117
1
FEATURES
FEATURES
Built-in 7-channel power amplifier
iPod controlling capability
◆ Minimum RMS output power
(0.7% THD, 1 kHz, 8 Ω)
Front: 115 W + 115 W
Center: 115 W
Surround: 115 W + 115 W
Surround back: 115 W + 115 W
◆ DOCK terminal to connect a YAMAHA iPod universal dock
(such as YDS-10 sold separately), which supports iPod (Click
and Wheel), iPod nano, and iPod mini
Sound field programs
◆ Proprietary YAMAHA technology for the creation of sound
fields
◆ Dolby Digital/Dolby Digital EX decoder
◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6, DTS 96/
24 decoder
◆ Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx
decoder
◆ Neural Surround decoder (U.S.A. and Canada models only)
◆ Virtual CINEMA DSP
◆ SILENT CINEMA™
Sophisticated AM/FM tuner
◆ 40-station random and direct preset tuning
◆ Automatic preset tuning
◆ Preset station shifting capability (preset editing)
XM Satellite Radio (U.S.A. model only)
◆ XM Satellite Radio tuning capability (using the “XM
Connect-and-Play digital antenna accessory” sold separately)
◆ Neural Surround decoder to play back the surround sound
content of the XM Satellite Radio broadcasts in multichannels, resulting in a full surround sound experience
Other features
◆ YPAO (YAMAHA Parametric Room Acoustic Optimizer) for
automatic speaker setup
◆ 192-kHz/24-bit D/A converter
◆ OSD (on-screen display) menus that allow you to optimize
this unit to suit your individual audiovisual system
◆ 8 additional input jacks for discrete multi-channel input
◆ Pure Direct mode for pure hi-fie stereo sound with analog and
PCM sources
◆ S-video signal input/output capability
◆ Component video input/output capability
(3 COMPONENT VIDEO INs and 1 MONITOR OUT)
◆ Digital video signal conversion (composite video ↔ S-video
→ component video) capability for monitor out
◆ Optical and coaxial digital audio signal jacks
◆ Sleep timer
◆ Cinema and music night listening modes
◆ Remote control with preset remote control codes,
backlighting input selector buttons, and an iPod (stationed in a
YAMAHA iPod universal dock connected to the DOCK
terminal) controlling capability
◆ Compressed Music Enhancer mode to improve the sound
quality of compression artifacts (such as the MP3 format) to
that of a high-quality stereo
Notes
• y indicates a tip for your operation.
• Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button
names differ between the front panel and the remote control, the button name on the remote control is given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and product, the product has priority.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks
of Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
“DTS”, “DTS-ES”, “NEO:6”, and “DTS 96/24” are trademarks
of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital
Theater Systems, Inc. All right reserved.
“SILENT CINEMA” is a trademark of YAMAHA
CORPORATION.
The XM name and related logos are registered trademarks of XM
Satellite Radio Inc.
iPod®
“iPod” is a trademark of Apple Computer, Inc., registered in the
U.S. and other countries.
2
Neural Surround™ name and related logos are trademarks owned
by Neural Audio Corporation.
GETTING STARTED
GETTING STARTED
INTRODUCTION
Supplied accessories
Check that you received all of the following parts.
Remote control
CODE SET
Batteries (2)
(AA, R6, UM-3)
AM loop antenna
Indoor FM antenna
(U.S.A. and Canada models)
Indoor FM antenna
(Australia model)
TRANSMIT
POWER
POWER
TV
AV
CD
CD-R
STANDBY
POWER
MD
Optimizer microphone
SLEEP
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
TV VOL
TV CH
VOLUME
TV MUTE
TV INPUT
MUTE
MUSIC
ENTERTAIN
MOVIE
3
4
PHONO
AMP
SOURCE
TV
STEREO
1
2
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
10
ENT.
EFFECT
PRESET/CH
LEVEL
TITLE
SET MENU
MENU
SRCH MODE
BAND
ENTER
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
AUDIO
DISC SKIP
Installing batteries in the remote control
1
Notes
3
2
1
Take off the battery compartment cover.
2
Insert the two supplied batteries
(AA, R6, UM-3) according to the polarity
markings (+ and –) on the inside of the
battery compartment.
3
Snap the battery compartment cover back
into place.
• Change all of the batteries if you notice the following
conditions:
– the operation range of the remote control decreases.
– the TRANSMIT indicator does not flash or its light becomes
dim.
• Do not use an old battery together with a new one.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throw away batteries with general house waste; dispose
of them correctly in accordance with your local regulations.
• If the remote control is without batteries for more than 2
minutes, or if exhausted batteries remain in the remote control,
the contents of the memory may be cleared. When the memory
is cleared, insert new batteries, set up the remote control code
and program any acquired functions that may have been
cleared.
3
CONTROLS AND FUNCTIONS
CONTROLS AND FUNCTIONS
Front panel
Note
The XM Satellite Radio controlling functions in the following buttons (SEARCH MODE, CATEGORY, PRESET/TUNING/CH l /
h, MEMORY, and DISPLAY) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input
source. For details, see “XM Satellite Radio controls and functions” on page 60.
2
1
7
3 45 6
8
9
0
A
(U.S.A. model)
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
LEVEL
MAN'L/AUTO FM
NEXT
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
EDIT
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
B
C
D
E
F
G
1 STANDBY/ON
Turns on this unit or sets it to the standby mode
(see page 31).
Notes
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
• When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.
2 PURE DIRECT
Turns on or off the Pure Direct mode (see page 45).
3 Remote control sensor
Receives signals from the remote control (see page 8).
4 Front panel display
Shows information about the operational status of this unit
(see page 9).
4
H
I
J
VIDEO
L
AUDIO
R
OPTICAL
K
5 PRESET/TUNING, EDIT
• Switches the function of PRESET/TUNING/CH l /
h between selecting preset station numbers and
selecting the tuning frequency.
• Edits the assignments of preset stations (see page 57).
6 FM/AM
Switches the reception band between FM and AM when
“TUNER” is selected as the input source (see page 52).
7 A/B/C/D/E, NEXT
• Selects one of the 5 preset station groups (A to E) when
“TUNER” is selected as the input source (see page 52).
• Selects the speaker channel whose output level you
want to adjust when “TUNER” is not selected as the
input source (see page 42).
CONTROLS AND FUNCTIONS
F PROGRAM selector
Selects sound field programs or adjusts the bass/treble
balance in conjunction with TONE CONTROL (see
page 39).
G TONE CONTROL
Adjusts the bass/treble balance of the front left and right,
center, presence left and right and subwoofer channels in
conjunction with the PROGRAM selector
(see page 39).
9 MEMORY (MAN’L/AUTO FM)
Stores a preset station in the memory. Hold down this
button for more than 3 seconds to start automatic preset
tuning (see page 54).
H INPUT MODE
Selects either digital or analog input signals exclusively or
sets this unit to automatically detect the type of input
signals and select the corresponding input signals when
one component is connected via both digital and analog
connections (see page 41).
0 TUNING MODE (AUTO/MAN’L)
Switches between automatic tuning (the AUTO indicator
is turned on) and manual tuning (the AUTO indicator is
turned off) (see page 52).
I INPUT selector
Selects the desired input source.
A VOLUME
Controls the output level of all audio channels.
J MULTI CH INPUT
Selects the component connected to the MULTI CH
INPUT jacks as the input source (see page 44).
y
Note
This does not affect the AUDIO OUT (REC) level.
B OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
optimizer microphone in the “AUTO SETUP” procedure
(see page 32).
C
PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with
headphones (see page 40).
Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
The input source connected to the MULTI CH INPUT jacks takes
priority over the source selected with the INPUT selector on the
front panel (or the input selector buttons on the remote control).
K VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console or a video camera
(see page 27).
y
To reproduce the source signals input at these jacks, select
“V-AUX” as the input source.
Note
The audio signals input at the DOCK terminal on the rear panel
take priority over the ones input at the VIDEO AUX jacks.
D SPEAKERS A/B
Turns on or off the set of front speakers connected to the
FRONT A and/or B terminals on the rear panel each time
the corresponding button is pressed.
E STRAIGHT (EFFECT)
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multichannel input signals are output directly from their
respective speakers without effect processing (see
page 45).
5
INTRODUCTION
8 PRESET/TUNING/CH l / h, LEVEL +/–
• Selects one of the 8 preset station numbers (1 to 8)
when “TUNER” is selected as the input source. The
colon (:) is displayed in the front panel display (see
page 52).
• Selects the tuning frequency when “TUNER” is
selected as the input source. The colon (:) is not
displayed in the front panel display (see page 52).
• Adjusts the level of the speaker channel selected using
NEXT when “TUNER” is not selected as the input
source (see page 42).
CONTROLS AND FUNCTIONS
Remote control
This section describes the function of each control on the remote control used to control this unit. To operate other
components, see “REMOTE CONTROL FEATURES” on page 99.
Notes
• The XM Satellite Radio controlling functions in the following buttons (XM, XM MEMORY, SRCH MODE, DISPLAY, cursor
buttons u / d / j / i, numeric buttons and ENT.) are only applicable to the U.S.A. model and are operational only when “XM” is
selected as the input source. For details, see “XM Satellite Radio controls and functions” on page 60.
• The operation mode of the remote control buttons in the shaded area below depends on the component selector switch position. Set the
component selector switch to AMP to control this unit. To control the TUNER functions, set the component selector switch to
SOURCE and then press TUNER to select “TUNER” as the input source.
1
2
0
CODE SET
A
TRANSMIT
POWER
POWER
TV
AV
CD
CD-R
STANDBY
POWER
B
MD
SLEEP
XM
3
C
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
D
PHONO
AMP
SOURCE
TV VOL
TV CH
VOLUME
E
F
TV
4
5
6
7
G
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
EXTD SUR. PURE DIRECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
ENT.
10
EFFECT
PRESET/CH
LEVEL
SET MENU
TITLE
MENU
SRCH MODE
BAND
8
I
J
ENTER
A-E/CAT.
9
H
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
AUDIO
DISC SKIP
K
■ Controlling this unit
Set the component selector switch to AMP to control this
unit.
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate (see page 8).
2 CODE SET
Use to set up remote control codes (see page 101).
3 Input selector buttons
Select the input source you want to control.
Note
The corresponding input selector button for the currently selected
input source lights up for approximately 5 seconds after you press
any buttons on the remote control, showing which source
component is currently being operated.
4 Sound field program selector buttons
Select sound field programs (see page 70).
– Use SELECT to play back 2-channel sources in
surround (see page 49).
– Use EXTD SUR. to switch between 5.1 and
6.1/7.1-channel playback of multi-channel sources
(see page 48).
– Use PURE DIRECT to turn on or off the Pure Direct
mode (see page 45).
5 SPEAKERS
Turns on or off the set of front speakers connected to the
FRONT A and/or B terminals on the rear panel. Press this
button repeatedly to toggle as follows:
A on
B on
A and B off
6 ENHANCER
Turns on or off the Compressed Music Enhancer mode
(see page 43).
(U.S.A. model)
6
7 LEVEL
Selects the speaker channel to be adjusted and sets the
output level (see page 42).
CONTROLS AND FUNCTIONS
8 Cursor buttons u / d / j / i, ENTER
Select and adjust the sound field program parameters or
the “SET MENU” parameters.
0 TRANSMIT indicator
Flashes while the remote control is sending infrared
signals.
J SET MENU
Enters “SET MENU” (see page 85).
K ON SCREEN
Selects the on-screen display (OSD) mode for your video
monitor (see page 47).
A STANDBY
Sets this unit to the standby mode (see page 31).
B POWER
Turns on this unit (see page 31).
C SLEEP
Sets the sleep timer (see page 41).
D MULTI CH IN
Selects the component connected to the MULTI CH
INPUT jacks as the input source when using an external
decoder, etc. (see page 44).
E VOLUME +/–
Increases or decreases the volume level.
F Component selector switch
Selects the operation mode of the remote control buttons
in the shaded area.
AMP
Operates this unit.
SOURCE
Operates the component selected with an input
selector button (see page 100).
TV
Operates the TV assigned to either DTV/CBL or
PHONO (see page 99).
Notes
• To set the remote control codes for other components, see
page 101.
• When you set the remote control codes for both DTV/CBL and
PHONO (see page 101), priority is given to the one set for
DTV/CBL.
G MUTE
Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page 40).
H STRAIGHT (EFFECT)
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multichannel input signals are output directly from their
respective speakers without effect processing (see
page 45).
7
INTRODUCTION
9 RETURN
Returns to the previous menu level when adjusting the
“SET MENU” parameters.
I NIGHT
Turns on or off the night listening modes (see page 40).
CONTROLS AND FUNCTIONS
■ Controlling the TUNER functions
■ Using the remote control
Set the component selector switch to SOURCE and then
press TUNER to select “TUNER” as the input source.
The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
4 Numeric buttons
Use numbers 1 through 8 to select preset stations.
(U.S.A. model)
7 BAND
Switches the reception band between FM and AM
(see page 52).
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
8 Cursor buttons u / d / j / i
Press j / i to select a preset station group (A to E) and
u / d to select a preset station number (1 to 8)
(see page 56).
SEARCH MODE
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
DISPLAY
CATEGORY
NEXT
EDIT
LEVEL
+
PROGRAM
PHONES
MAN'L/AUTO FM
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
30
30
CODE SET
VIDEO
L
AUDIO
R
OPTICAL
Approximately 6 m (20 ft)
TRANSMIT
POWER
POWER
TV
AV
CD
CD-R
STANDBY
POWER
MD
SLEEP
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
TV VOL
TV CH
VOLUME
PHONO
AMP
SOURCE
TV
TV MUTE
STEREO
TV INPUT
MUTE
MUSIC
ENTERTAIN
MOVIE
3
4
1
2
STANDARD
SELECT
5
6
EXTD SUR. PURE DIRECT
A SPEAKERS B
9
7
8
NIGHT
STRAIGHT
0
10
ENT.
EFFECT
PRESET/CH
LEVEL
TITLE
SET MENU
MENU
SRCH MODE
BAND
ENTER
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
AUDIO
DISC SKIP
Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types
of conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places
8
CONTROLS AND FUNCTIONS
Front panel display
INTRODUCTION
Note
The XM indicator is only applicable to the U.S.A. model and the cursor on the left of the XM indicator lights up only when “XM” is
selected as the input source. For details, see “Basic XM Satellite Radio operations” on page 62.
2 3 4
1
t
6
7
8
9
0
A
B
D
C
pVCR pDVR pV-AUX pDTV/CBL pDVD pMD/CD-R pTUNER pCD pXM pPHONO
96
24
DOCK
MATRIX DISCRETE
ENHANCER
q EX
5
VIRTUAL
STANDARD
SP SILENT CINEMA
NIGHT
AB
VOLUME
YPAO AUTO TUNED STEREO MEMORY
HiFi DSP
SLEEP
dB
MUTE
96/24 LFE
ft
q DIGITAL
q PL x q PL
q PL
PCM
neural
E
mS
dB
F
G H
I
1 Decoder indicators
The respective indicator lights up when any of the
decoders of this unit function.
Note
The neural indicator is only applicable to the U.S.A. and Canada
models and lights up only when the Neural Surround decoder is
selected
(see page 49).
J
K
L C R
SL SB SR
L M N
O
P
6 DOCK indicator
Lights up when you station your iPod in a YAMAHA iPod
universal dock (such as YDS-10 sold separately)
connected to the DOCK terminal of this unit
(see page 24).
7 SILENT CINEMA indicator
Lights up when headphones are connected and a sound
field program is selected (see page 40).
2 ENHANCER indicator
Lights up when the Compressed Music Enhancer mode is
turned on (see page 43).
8 CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field
program (see page 71).
3 Sound field indicators
Light up to indicate the active DSP sound fields.
9 YPAO indicator
Lights up when you run “AUTO SETUP” and when the
speaker settings set in “AUTO SETUP” are used without
any modifications (see page 32).
Presence DSP sound field
Listening position
Surround left
DSP sound field
Surround right
DSP sound field
Surround back DSP sound field
4 VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active (see
page 50).
5 Input source indicators
The corresponding cursor lights up to show the currently
selected input source.
0 AUTO indicator
Lights up when this unit is in the automatic tuning mode
(see page 52).
A TUNED indicator
Lights up when this unit is tuned into a station
(see page 52).
B STEREO indicator
Lights up when this unit is receiving a strong signal for an
FM stereo broadcast while the AUTO indicator is lit
(see page 52).
9
CONTROLS AND FUNCTIONS
C MEMORY indicator
Flashes to show that a station can be stored (see page 54).
O Input channel and speaker indicators
Presence speaker indicator
D VOLUME level indicator
Indicates the current volume level.
L C R
SL SB SR
Surround back speaker indicator
E PCM indicator
Lights up when this unit is reproducing PCM (Pulse Code
Modulation) digital audio signals.
Input channel indicators
Indicate the channel components of the current digital
input signal.
F STANDARD indicator
Lights up when the “SUR. STANDARD” or “SUR.
ENHANCED” program is selected (see page 49).
Presence and surround back speaker
indicators
Light up according to the number of presence and
surround back speakers set for “PRESENCE SP” (see
page 87) and “SUR. B L/R SP” (see page 87) in
“SOUND MENU” when “TEST” in “SOUND
MENU” is set to “ON” (see page 90).
G SP A B indicators
Light up according to the set of front speakers selected.
H Headphones indicator
Lights up when headphones are connected (see page 40).
I NIGHT indicator
Lights up when you select a night listening mode
(see page 40).
J HiFi DSP indicator
Lights up when you select a HiFi DSP sound field
program (see page 71).
K Multi-information display
Shows the name of the current sound field program and
other information when adjusting or changing settings.
L SLEEP indicator
Lights up while the sleep timer is on (see page 41).
M MUTE indicator
Flashes while the MUTE function is on (see page 40).
N 96/24 indicator
Lights up when a DTS 96/24 signal is input to this unit.
10
Input channel indicator
y
You can make settings for the presence and surround back
speakers automatically by running “AUTO SETUP” (see
page 32) or manually by adjusting settings for “PRESENCE SP”
(see page 87) and “SUR. B L/R SP” (see page 87) in “SOUND
MENU”.
P LFE indicator
Lights up when the input signal contains the LFE signal.
CONTROLS AND FUNCTIONS
Rear panel
3
2
6
5
4
7
8
INTRODUCTION
1
TUNER
AUDIO
AUDIO
75Ω UNBAL.
FM
ANT
COMPONENT VIDEO
DOCK
GND
AM
ANT
PHONO
Y
GND
XM
PB
PR
DVD
SPEAKERS
VIDEO
PRESENCE
DTV/
CBL
DIGITAL OUTPUT
MD/CD-R
DVD
PRE OUT
CD
OPTICAL
FRONT
SURROUND
CENTER
SINGLE
DVR
IN
SURROUND BACK
DTV/
CBL
(PLAY)
MD/
CD-R
MD/CD-R
OUT
IN
(REC)
DVR
SUBWOOFER
MONITOR OUT
DVD
FRONT
OUT
A
SURROUND
DTV/CBL
IN
SURROUND
VCR
SURROUND
BACK
OUT
CD
B
MONITOR OUT
DVD
COAXIAL
DIGITAL
INPUT
SUB
WOOFER
CENTER
FRONT
S VIDEO
CENTER
SURROUND BACK
VIDEO
MULTI CH INPUT
(U.S.A. model)
9 0
A
B
C
1 XM jack (U.S.A. model only)
See page 59 for connection information.
7 PRESENCE speaker terminals
See page 15 for connection information.
2 Audio component jacks
See page 23 for connection information.
8 AC OUTLET(S)
Use to supply power to your other audiovisual
components.
See page 29 for details.
3 DOCK terminal
Use to connect a YAMAHA iPod universal dock (such as
YDS-10 sold separately) where your iPod can be
stationed.
See page 24 for connection information.
4 COMPONENT VIDEO jacks
See pages 19 and 20 for connection information.
5 PRE OUT jacks
See page 25 for connection information.
6 Antenna terminals
See page 28 for connection information.
9 DIGITAL OUTPUT jack
See page 23 for connection information.
0 DIGITAL INPUT jacks
See page 20 for connection information.
A MULTI CH INPUT jacks
See page 26 for connection information.
B Video component jacks
See pages 19 and 20 for connection information.
C Speaker terminals
See page 13 for connection information.
11
CONNECTIONS
CONNECTIONS
Placing speakers
The speaker layout below shows the standard ITU-R*
speaker setting. You can use it to enjoy CINEMA DSP and
multi-channel audio sources.
*
ITU-R is the radio communication sector of the ITU
(International Telecommunication Union).
PL
Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). If for some reason it is not practical
to use a center speaker, you can do without it. Best results,
however, are obtained with the full system. Place the
center speaker centrally between the front speakers and as
close to the monitor as possible, such as directly over or
under it.
PR
C
FR
FL
30˚
SL
SR
Surround left and right speakers (SL and SR)
The surround speakers are used for effect and surround
sounds. Place these speakers behind your listening
position, facing slightly inwards, about 1.8 m (6 ft) above
the floor.
60˚
80˚
SL
SBL
SR
SBR
30 cm (12 in) or more
PR
FR
PL
SW
FL
SR
SBR
C
Front left and right speakers (FL and FR)
The front speakers are used for the main source sound plus
effect sounds. Place these speakers at an equal distance
from the ideal listening position. The distance of each
speaker from each side of the video monitor should be the
same.
SBL
SL
1.8 m (6 ft)
Surround back left and right speakers
(SBL and SBR)
The surround back speakers supplement the surround
speakers and provides more realistic front-to-back
transitions. Place these speakers directly behind the
listening position and at the same height as the surround
speakers. They should be positioned at least 30 cm (12 in)
apart. Ideally, they should be positioned at the same width
as that of the front speakers.
Presence left and right speakers (PL and PR)
The presence speakers supplement the sound from the
front speakers with extra ambient effects produced by
CINEMA DSP (see page 71). These effects include
sounds that filmmakers intent to locate a little farther back
behind the screen in order to create more theater-like
ambience. Place these speakers at the front of the room
about 0.5 – 1 m (1 – 3 ft) outside the front speakers, facing
slightly inward, and about 1.8 m (6 ft) above the floor.
Subwoofer (SW)
The use of a subwoofer with a built-in amplifier, such as
the YAMAHA Active Servo Processing Subwoofer
System, is effective not only for reinforcing bass
frequencies from any or all channels, but also for hi-fi
stereo sound reproduction of the LFE (low-frequency
effect) channel included in Dolby Digital and DTS
sources. The position of the subwoofer is not so critical,
because low bass sounds are not highly directional. But it
is better to place the subwoofer near the front speakers.
Turn it slightly toward the center of the room to reduce
wall reflections.
12
CONNECTIONS
Connecting speakers
Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass.
CAUTION
Notes
• A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a
stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the
plain cable to the “–” (black) terminals.
• The low-frequency signals of other speakers set to “SML” (or “SMALL”) or to “NONE” in “SPEAKER SET” (see pages 86 and 87)
are directed to the speakers selected in “LFE/BASS OUT” (see page 88).
Subwoofer
Presence speakers
Right
Left
2
1
3
Surround speakers
Right
Left
4
5
SPEAKERS
PRESENCE
PRE OUT
SUBWOOFER
A
SURROUND
B
FRONT
CENTER
SURROUND BACK
(U.S.A. model)
6
7
Front
speakers
(B)
8
10
9
Center
speaker
Surround back
speakers
Right
Left
Front speakers (A)
Right
Left
13
PREPARATION
• Before connecting the speakers, make sure that this unit is set to the standby mode (see page 31).
• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this
unit. This could damage this unit and/or speakers.
• Use magnetically shielded speakers. If this type of speakers still creates the interference with the
monitor, place the speakers away from the monitor.
• If you are to use 4 or 6 ohm speakers, be sure to set “SP IMP.” to “6ΩMIN” before using this unit
(see page 30).
CONNECTIONS
FRONT terminals
Connect one or two front speaker systems (6, 7) to these
terminals. If you use only one front speaker system,
connect it to the FRONT A or B terminal.
CENTER terminals
Connect a center speaker (8) to these terminals.
SURROUND terminals
Connect surround speakers (4, 5) to these terminals.
SURROUND BACK terminals
Connect a surround back speakers (9, 10) to these
terminals.
PRESENCE terminals
Connect presence speakers (2, 3) to these terminals.
SUBWOOFER jack
Connect a subwoofer with a built-in amplifier (1) (such as
the YAMAHA Active Servo Processing Subwoofer
System) to this jack.
14
Speaker layout
2
6
3
1
4
7
8
5
10
9
CONNECTIONS
■ Connecting the speaker cable
■ Connecting to the PRESENCE speaker
terminals
1
Connect presence speakers to these terminals.
Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable and then twist the exposed wires of the
cable together to prevent short circuits.
1
Open the tab.
2
Insert one bare wire into the hole on the side
of each terminal.
3
Close the tab to secure the wire.
10 mm (0.4 in)
Loosen the knob.
Red: positive (+)
Black: negative (–)
3
Insert one bare wire into the hole on the side
of each terminal.
Red: positive (+)
Black: negative (–)
4
Tighten the knob to secure the wire.
Red: positive (+)
Black: negative (–)
15
PREPARATION
2
CONNECTIONS
■ Connecting the banana plug
The banana plug is a single-pole electrical connector
widely used to terminate speaker cables.
Banana plug
y
You can also use the banana plug with the PRESENCE speaker
terminals. Open the tab and then insert one banana plug into the
hole on the side of each terminal. Do not close the tab after
connecting the banana plug.
1
Tighten the knob.
2
Insert the banana plug connector into the
end of the corresponding terminal.
16
CONNECTIONS
Information on jacks and cable plugs
Note
You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL
and OPTICAL jacks, priority is given to the signals input at the COAXIAL jack. All digital input jacks are compatible with 96-kHz
sampling digital signals.
Audio jacks and cable plugs
DIGITAL AUDIO
R
COAXIAL
OPTICAL
(White)
(Red)
(Orange)
L
R
C
AUDIO
Left and right
Coaxial
analog audio digital audio
cable plugs
cable plug
VIDEO
S VIDEO
(Yellow)
O
V
S
Optical
digital
audio cable
plug
Composite
video cable
plug
S-video
cable plug
COMPONENT VIDEO
Y
PB
PR
(Green)
(Blue)
(Red)
Y
PB
PR
PREPARATION
DIGITAL AUDIO
L
Video jacks and cable plugs
Component
video cable
plugs
■ Audio jacks
■ Video jacks
This unit has three types of audio jacks. Connection
depends on the availability of audio jacks on your other
components.
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your video
monitor. When “VIDEO CONV.” is set to “ON” (see
page 94), the video signals input at the VIDEO and S
VIDEO jacks are converted and output at the VIDEO, S
VIDEO and COMPONENT VIDEO jacks
interchangeably.
AUDIO jacks
For conventional analog audio signals transmitted via left
and right analog audio cables. Connect red plugs to the
right jacks and white plugs to the left jacks.
DIGITAL AUDIO COAXIAL jacks
For digital audio signals transmitted via coaxial digital
audio cables.
DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital
audio cables.
Note
Pull out the cap from the optical jack before you connect the fiber
optic cable. Do not discard the cap. When you are not using the
optical jack, be sure to put the cap back in place. This cap protects
the jack from dust.
VIDEO jacks
For conventional composite video signals transmitted via
composite video cables.
S VIDEO jacks
For S-video signals, separated into the luminance (Y) and
chrominance (C) video signals transmitted on separate
wires of S-video cables.
COMPONENT VIDEO jacks
For component video signals, separated into the
luminance (Y) and chrominance (PB, PR) video signals
transmitted on separate wires of component video cables.
17
CONNECTIONS
Audio and video signal flow
■ Audio signal flow for AUDIO OUT (REC)
Input
Output
AUDIO OUT (REC)
DIGITAL AUDIO
COAXIAL
Digital audio
DIGITAL AUDIO
OPTICAL
L
R
L
R
Analog audio
AUDIO
Digital output
Analog output
Note
This unit handles digital and analog signals independently. Thus, audio signals input at the analog jacks are output only at the analog
AUDIO OUT (REC) jacks. Likewise, audio signals input at the DIGITAL INPUT (OPTICAL or COAXIAL) jacks are output only at the
DIGITAL OUTPUT jack.
■ Video signal flow for MONITOR OUT
Output
(MONITOR OUT)
Input
Y
PB
PR
Y
PB
PR
COMPONENT
VIDEO
Analog video
S VIDEO
VIDEO
Through
Video conversion when “VIDEO CONV.” is set to “ON” (see page 94)
Note
When video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input signals is as
follows where the video signals input at the COMPONENT VIDEO jacks have the top priority:
COMPONENT VIDEO > S VIDEO > VIDEO
18
CONNECTIONS
Connecting a TV
Connect your TV to the VIDEO MONITOR OUT jack, the S VIDEO MONITOR OUT jack or the COMPONENT
VIDEO MONITOR OUT jacks of this unit.
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
(U.S.A. model)
PREPARATION
COMPONENT VIDEO
Y
PB
PR
MONITOR OUT
MONITOR OUT
S VIDEO
VIDEO
S
Y
V
Video in
PB
PR
Component video in
S-video in
TV
19
CONNECTIONS
Connecting a DVD player, a DVD recorder, a VCR or an STB
Connect your DVD player, DVD recorder, VCR or STB (set-top box) using the same type of video connections as those
made for your TV (see page 19). The cable TV receiver and the satellite receiver are examples of the STB.
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
Notes
• When “VIDEO CONV.” is set to “OFF” (see page 94), be sure to make the same type of video connections as those made for your TV
(see page 19). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other
components to the VIDEO jacks.
• When “VIDEO CONV.” is set to “ON” (see page 94), the converted video signals are output only at the MONITOR OUT jacks. When
recording a source, you must make the same type of video connections between each component.
• To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT or DIGITAL
OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT”
(see page 92).
• If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is
given to the signals input at the DIGITAL INPUT (COAXIAL) jack.
■ Connecting a DVD player
R
L
S
V
AUDIO
Y
VIDEO
DVD
DVD
COAXIAL
DIGITAL
INPUT
20
PB
PR
(U.S.A. model)
COMPONENT VIDEO
DVD
DVD
Y
Video out
O
S-video out
C
Audio out
Component video out
Optical audio out
Coaxial audio out
DVD player
PB
PR
CONNECTIONS
■ Connecting a DVD recorder
COMPONENT VIDEO
Y
PB
PR
VIDEO
DVR
IN
DVR
OUT
PREPARATION
S
S
V
V
Video out
L
Video in
R
S-video out
L
S-video in
R
Audio in
Audio out
(U.S.A. model)
Y
PB
PR
Component video out
DVD recorder
■ Connecting a VCR
VIDEO
IN
VCR
OUT
S
S
V
V
Video out
L
Video in
R
S-video out
L
S-video in
R
Audio in
Audio out
(U.S.A. model)
VCR
21
CONNECTIONS
■ Connecting an STB
Cable TV receiver or
satellite receiver
L
S
V
Y
Video out
R
S-video out
O
Audio out
Optical audio out
Component video out
Y
OPTICAL
DTV/CBL
DIGITAL
INPUT
22
DTV/
CBL
DTV/
CBL
PR
(U.S.A. model)
COMPONENT VIDEO
VIDEO
PB
PB
PR
CONNECTIONS
Connecting a CD player, an MD player, a tape deck or a turntable
Connect your CD player, MD player or tape deck via analog and/or digital connections.
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
Notes
CD player
Turntable
Coaxial audio out
Audio out
GND
C
R
L
R
Audio out
L
(U.S.A. model)
AUDIO
AUDIO
PHONO
GND
DIGITAL OUTPUT
MD/CD-R
CD
IN
OPTICAL
(PLAY)
MD/
CD-R
OUT
MD/CD-R
(REC)
CD
R
O
O
Optical audio in
Optical audio out
DIGITAL
INPUT
Audio in
L
R
L
Audio out
MD recorder or
tape deck
23
PREPARATION
• To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT or DIGITAL
OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT”
(see page 92).
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal. However, you may hear less noise without the
connection to the GND terminal for some turntables.
• The PHONO jacks are only compatible with a turntable with an MM or a high-output MC cartridge. To connect a turntable with a lowoutput MC cartridge to the PHONO jacks, use an in-line boosting transformer or an MC-head amplifier.
CONNECTIONS
Connecting a YAMAHA iPod universal dock
This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a YAMAHA iPod universal
dock (such as YDS-10 sold separately) where you can station your iPod and control playback of your iPod using the
supplied remote control. Connect a YAMAHA iPod universal dock (such as YDS-10 sold separately) to the DOCK
terminal on the rear panel of this unit using its dedicated cable. Once the connection is complete, station your iPod in the
YAMAHA iPod universal dock.
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
Notes
• Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
• You need a YAMAHA iPod universal dock (such as YDS-10 sold separately) and its dedicated cable compatible with the DOCK
terminal of this unit.
• Once your iPod is stationed in a YAMAHA iPod universal dock (such as YDS-10 sold separately) connected to the DOCK terminal of
this unit, this unit begins the signal transmission with your iPod.
• Once the connection between your iPod and this unit is complete, “iPod connected” appears in the front panel display and the DOCK
indicator lights up in the front panel display. If the connection between your iPod and this unit fails, a status message appears in the
front panel display. For a complete list of connection status messages, see the iPod section in “TROUBLESHOOTING” on page 111.
• Only analog audio and video signals of your iPod are input at the DOCK terminal, and the analog audio signals can be output at the
analog AUDIO OUT (REC) jacks for recording.
• Your iPod battery is automatically charged when your iPod is stationed in a YAMAHA iPod universal dock (such as YDS-10 sold
separately) connected to the DOCK terminal of this unit as long as this unit is turned on.
• Depending on the type of iPod, you may need to insert one of the iPod adapters supplied with a YAMAHA iPod universal dock (such
as YDS-10 sold separately) into the dock slot before you station your iPod.
iPod
YAMAHA iPod universal dock
(such as YDS-10 sold separately)
(U.S.A. model)
DOCK
24
CONNECTIONS
Connecting an external amplifier
This unit has more than enough power for any home use. However, if you want to add more power to the speaker output
or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks.
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
Notes
Front channel
amplifier
Surround channel
amplifier
Front in
R
Surround back channel
amplifier
Surround in
L
R
Surround back in
L
R
L
(U.S.A. model)
PRE OUT
FRONT
SURROUND
CENTER
SURROUND BACK
SUBWOOFER
Center in
Center channel
amplifier
Subwoofer in
Subwoofer
25
PREPARATION
• When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals.
• Set the volume level of the external amplifiers connected to the PRE OUT jacks to the maximum.
• The signals output at the FRONT PRE OUT and CENTER PRE OUT jacks are affected by the TONE CONTROL settings (see
page 39).
• If SPEAKERS A is turned off (see page 38), signals are output only at the FRONT PRE OUT jacks.
• Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
• Adjust the volume level of the subwoofer with the control on the subwoofer. It is also possible to adjust the volume level with the
supplied remote control (see page 42).
• Some signals may not be output at the SUBWOOFER PRE OUT jack depending on the settings for “SPEAKER SET” (see page 86)
and “LFE/BASS OUT” (see page 88).
CONNECTIONS
Connecting a multi-format player or an external decoder
This unit is equipped with 8 additional input jacks (FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R and SUBWOOFER) for discrete multi-channel input from a multi-format player, external
decoder or sound processor. Connect the output jacks on your multi-format player or external decoder to the MULTI CH
INPUT jacks. Be sure to match the left and right output jacks to the left and right input jacks for the front and surround
channels.
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
Notes
• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 44), this unit automatically
turns off the digital sound field processor, and you cannot select sound field programs.
• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that
you connect at least a 5.1-channel speaker system before using this feature.
• When headphones are used, signals are output only from the front left and right channels.
For 6-channel input
For 8-channel input
(U.S.A. model)
(U.S.A. model)
FRONT
FRONT
SURROUND
SURROUND
SURROUND
BACK
SUB
WOOFER
CENTER
Multi-format player or
external decoder
26
Multi-format player or
external decoder
L
R
L
R
Surround out
Surround back out
R
Center out
L
Front out
R
Surround out
L
Center out
R
Subwoofer out
Front out
L
CENTER
MULTI CH INPUT
Subwoofer out
SUB
WOOFER
MULTI CH INPUT
CONNECTIONS
Connecting a game console, a video camera or a portable audio player
Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit.
CAUTION
Be sure to turn off the volume of this unit and other components before making connections.
Note
The audio signals input at the DOCK terminal on the rear panel take priority over the ones input at the VIDEO AUX jacks.
(U.S.A. model)
PREPARATION
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
DISPLAY
CATEGORY
EDIT
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
VIDEO AUX
AUDIO
L
Video out
S-video out
V
L
R
OPTICAL
R
O
Optical audio out
S
VIDEO
Audio out L/R
S VIDEO
Game console or
video camera
27
CONNECTIONS
Connecting the FM and AM antennas
Both FM and AM indoor antennas are supplied with this
unit. In general, these antennas should provide sufficient
signal strength. Connect each antenna correctly to the
designated terminals.
2
Press and hold the tab of the AM ANT
terminal.
3
Insert one of the AM loop antenna lead wires
into the AM ANT terminal.
4
Release the tab of the AM ANT terminal back
into place.
5
Repeat steps 2 through 4 to connect the
other lead wire to the GND terminal.
Notes
• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
• A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality,
install an outdoor antenna. Consult the nearest authorized
YAMAHA dealer or service center about outdoor antennas.
Indoor FM antenna
AM loop antenna
(U.S.A. model)
TUNER
75Ω UNBAL.
FM
ANT
GND
AM
ANT
Outdoor AM antenna
Use a 5 to 10 m (16.4 to 32.8 ft)
of vinyl-covered wire extended
outdoors from a window.
Ground (GND terminal)
For maximum safety and minimum interference, connect the
antenna GND terminal to a good earth ground. A good earth
ground is a metal stake driven into moist earth.
■ Connecting the AM loop antenna
1
Set up the AM loop antenna.
y
Once you have properly connected the AM loop antenna to
this unit, orient the AM loop antenna for the best reception
when you tune into AM stations (see page 52).
28
CONNECTIONS
Connecting the power cable
Once all connections are complete, plug the power cable into the AC wall outlet.
(U.S.A. model)
To the AC wall outlet
AC OUTLETS
SWITCHED
PREPARATION
■ AC OUTLET(S) (SWITCHED)
Australia model...................................................... 1 outlet
U.S.A. and Canada models ................................... 2 outlets
Use these outlet(s) to supply power to any connected
components. Connect the power cable of your other
components to these outlet(s). Power to these outlet(s) is
supplied when this unit is turned on. However, power to
these outlet(s) is cut off when this unit is set to the standby
mode. For information on the maximum power or the total
power consumption of the components that can be
connected to these outlet(s), see “SPECIFICATIONS” on
page 117.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, the stored data will be lost in case the power
cable is disconnected from the AC wall outlet or if the
power supply is cut off for more than one week.
29
CONNECTIONS
Setting the speaker impedance
CAUTION
4
If you are to use 4 or 6 ohm speakers, set “SP
IMP.” to “6ΩMIN” as follows BEFORE using this
unit.
Press STRAIGHT (EFFECT) on the front
panel repeatedly to select “6ΩMIN”.
The following display appears in the front panel
display.
STRAIGHT
2,5
(U.S.A. model)
EFFECT
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
TUNING MODE
DISPLAY
NEXT
LEVEL
+
PROGRAM
PHONES
MEMORY
CATEGORY
EDIT
MAN'L/AUTO FM
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
SP IMP.-6 MIN
2,4 3
5
1
Make sure this unit is set to the standby
mode.
See page 31 for details about turning on this unit or
setting it to the standby mode.
Press STANDBY/ON on the front panel to
save the new setting and set this unit to the
standby mode.
STANDBY
/ON
2
Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
While holding
down
STRAIGHT
STANDBY
/ON
EFFECT
3
Rotate the PROGRAM selector on the front
panel to select “SP IMP.”.
The following display appears in the front panel
display.
PROGRAM
SP IMP.-8 MIN
30
Note
The setting you made is reflected next time you turn on this
unit.
CONNECTIONS
Turning on this unit or setting it to the standby mode
When all connections are complete, turn on this unit.
STANDBY/ON
(U.S.A. model)
(U.S.A. model)
CODE SET
VOLUME
STANDBY
TRANSMIT
POWER
POWER
TV
AV
CD
CD-R
STANDBY
POWER
MD
PURE DIRECT
STANDBY
/ON
SLEEP
XM
MULTI CH IN
CBL
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
NEXT
LEVEL
+
PROGRAM
MAN'L/AUTO FM
DTV
TUNER
DVR
VCR
TV VOL
TV CH
VOLUME
AUTO/MAN'L
PHONO
INPUT
SPEAKERS
A
DVD
V-AUX
DISPLAY
CATEGORY
EDIT
PHONES
POWER
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
AMP
PREPARATION
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
SOURCE
TV
■ Turning on this unit
■ Setting this unit to the standby mode
Press STANDBY/ON on the front panel (or
POWER on the remote control) to turn on this
unit.
Press STANDBY/ON on the front panel again (or
STANDBY on the remote control) to set this unit
to the standby mode.
STANDBY
POWER
STANDBY
/ON
Front panel
or
STANDBY
/ON
Remote control
Front panel
or
Remote control
31
AUTO SETUP
AUTO SETUP
This unit employs the YPAO (YAMAHA Parametric Room Acoustic Optimizer) technology which lets you avoid
troublesome listening-based speaker setup and achieves highly accurate sound adjustments. The supplied optimizer
microphone collects and analyzes the sound your speakers produce in your actual listening environment.
YPAO performs the following checks and makes appropriate adjustments to give you the best possible sound from your
system.
Speaker wiring WIRING
Checks which speakers are connected and the polarity of each speaker.
Speaker distance DISTANCE
Checks the distance of each speaker from the listening position and adjusts the timing of each channel.
Speaker size SIZE
Checks the frequency response of each speaker and sets the appropriate low-frequency crossover for each channel.
Parametric equalizer EQ
Adjusts the frequency and the parametric equalizer level of each channel to reduce coloration across the channels and
create a cohesive sound field. This is particularly important if you use different brands of sizes of speakers for some
channels or have a room with unique sonic characteristics. In addition, the frequency response of each channel is adjusted
in accordance with the sound output from your front speakers.
Volume level LEVEL
Checks and adjusts the volume level of each speaker.
Notes
• Be advised that it is normal for loud test tones to be output during the “AUTO SETUP” procedure.
• If the “AUTO SETUP” procedure stops and an error or warning message appears on your video monitor, see the “AUTO SETUP”
section in “TROUBLESHOOTING” on page 112 for appropriate remedies.
• After you have completed the “AUTO SETUP” procedure, be sure to disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.
Connecting the optimizer microphone
Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel and place it in a suitable
location in your listening room.
y
It is recommended that you use a tripod (etc.) to affix the optimizer microphone at the same height as your ears would be when you are
seated in your listening position.
1
Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel.
2
Place the optimizer microphone at your
normal listening position on a flat level
surface with the omni-directional
microphone heading upward.
(U.S.A. model)
Optimizer microphone
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
SEARCH MODE
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
DISPLAY
CATEGORY
EDIT
NEXT
LEVEL
+
PROGRAM
PHONES
MAN'L/AUTO FM
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
OPTIMIZER
MIC
32
VIDEO
L
AUDIO
R
OPTICAL
AUTO SETUP
Using AUTO SETUP
1
Once you have connected the supplied optimizer
microphone to the OPTIMIZER MIC jack on the front
panel and have placed it in a suitable location in your
listening room, run “AUTO SETUP” in the OSD or in the
front panel display.
Set the component selector switch to AMP
and then press SET MENU to enter “SET
MENU”.
The top “SET MENU” display appears in the OSD.
AMP
SET MENU
SOURCE
Note
MENU
SRCH MODE
TV
To achieve the best results, make sure the room is as quiet as
possible while the “AUTO SETUP” procedure is in progress. If
there is too much ambient noise, the results may not be
satisfactory.
y
2
Press u / d to select “AUTO SETUP”.
PRESET/CH
SET MENU
ENTER
p
MAX
MAX
MIN
PRESET/CH
1 AUTO:MENU
.SETUP;;;;;;;AUTO
START
AV
STEREO
MD
CD-R
[ ]/[]:Up/Down
[ENTER]:Enter
Press ENTER to enter “AUTO SETUP”.
The “AUTO:MENU” display appears in the OSD.
Subwoofer
CD
A-E/CAT.
p
A-E/CAT.
3
TV
.;AUTOSETUP
;MANUALSETUP
.;SIGNAL INFO
CROSSOVER
HIGH CUT
VOLUME
MIN
p
[ ]/[]:Up/Down
[ENTER]:Enter
p
• You can run “AUTO SETUP” using the system menu that
appears in the OSD or in the front panel display. This manual
uses the OSD illustrations to explain the “AUTO SETUP”
procedure.
• If an error occurs during the “AUTO SETUP” procedure and an
error or warning message appears in the OSD or in the front
panel display, see the “AUTO SETUP” section in
“TROUBLESHOOTING” on pages 112 and 113 for a complete
list of error and warning messages and proper remedies.
• The initial setting for each parameter is indicated in bold.
• If the volume level and the crossover frequency of your
subwoofer can be adjusted, set the volume level to about half
way (or slightly less) and set the crossover frequency to the
maximum.
PREPARATION
SET MENU
.;AUTOSETUP
;MANUALSETUP
.;SIGNAL INFO
SLEEP
MUSIC
ENTERTAIN
MOVIE
3
4
MULTI CH IN
2
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
ENTER
DTV
TUNER
DVR
VCR
A-E/CAT.
Automatic
processing
of all items
[]/[]:Up/Down
[<]/[>]:Select
p
DVD
V-AUX
A-E/CAT.
EXTD SUR. PURE DIRECT
PHONO
10
ENT.
p
1
STANDARD
XM
CBL
EFFECT
AMP
SOURCE
TV VOL
TV CH
1
PRESET/CH
LEVEL
TITLE
ENTER
A-E/CAT.
STEREO
TV INPUT
MUSIC
MENU
SRCH MODE
BAND
VOLUME
TV
TV MUTE
SET MENU
MUTE
ENTERTAIN
MOVIE
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
1,11
2-10
REC
(U.S.A. model)
33
AUTO SETUP
The display changes as follows.
4
Press u / d to select “SETUP” and then
press j / i to select the desired setting.
PRESET/CH
1 AUTO:MENU
SETUP;;;;;;;AUTO
.START
PRESET/CH
ENTER
A-E/CAT.
ENTER
A-E/CAT.
A-E/CAT.
A-E/CAT.
1 AUTO:CHECK
INITIALIZING
.WIRING
SIZE/DISTANCE
EQUALIZING
LEVEL
CHECK CH=CENTER
|||||;;;;;;;;
[]: Exit
p
Choices: AUTO, RELOAD, UNDO, DEFAULT
• Select “AUTO” to automatically run the entire
“AUTO SETUP” procedure.
• Select “RELOAD” to reload the last “AUTO
SETUP” settings and override the previous
settings.
• Select “UNDO” to undo the last “AUTO SETUP”
settings and restore the previous settings.
• Select “DEFAULT” to reset the “AUTO SETUP”
parameters to the initial factory settings.
RESULT:EXIT
Note
“RELOAD” or “UNDO” is available only when you have
previously run “AUTO SETUP” and confirmed the results.
Press d to select “START” and then press
ENTER to start the setup procedure.
Loud test tones are output from each speaker and
“WAITING” appears in the OSD during the
“AUTO:CHECK” procedure. Once all items are set,
the “RESULT:EXIT” display appears in the OSD.
PRESET/CH
PRESET/CH
ENTER
A-E/CAT.
ENTER
A-E/CAT.
A-E/CAT.
A-E/CAT.
p
. WARNING (3)
RESULT
.
SP :
5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
>SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
p
5
p
p
Automatic
processing
of all items
[]/[]:Up/Down
[<]/[>]:Select
The results displayed under “RESULT” are as
follows:
Number of speakers SP
Displays the number of speakers connected to this
unit in the following order:
Front/Back/Subwoofer
Speaker distance DIST
Displays the speaker distance from the listening
position in the following order:
Closest speaker distance/Farthest speaker distance
Speaker level LVL
Displays the speaker output level in the following
order:
Lowest speaker output level/Highest speaker output
level
34
AUTO SETUP
7
Notes
Press j / i repeatedly to toggle between the
setup result displays.
PRESET/CH
ENTER
A-E/CAT.
RESULT:WIRING
FRONT L;;;;;;;OK
A-E/CAT.
PREPARATION
• If “E-10:INTERNAL ERROR” appears during the testing
procedure, restart from step 4.
• If you selected “RELOAD”, “UNDO” or “DEFAULT” in
step 4, no test tones are output.
• If an error occurs during the “AUTO:CHECK” procedure,
the setup procedure is canceled and an error screen
appears. For details, see “If an error screen appears” on
page 37.
• The number on the right of “WARNING” indicates the
number of warning messages. For details, see “If a
warning screen appears” on page 37.
• Depending on the listening environment, “SWFR
PHASE:REV” appears during the “AUTO:CHECK”
procedure and “SUBWOOFER PHASE” in “SOUND
MENU” (see page 88) is automatically set to
“REVERSE”.
Results of the speaker
connection and wiring
[<]/[>]:Select
[ENTER]:Return
6
Press d to select “RESULT” and then press
ENTER to display the setup results in detail.
PRESET/CH
PRESET/CH
ENTER
ENTER
RESULT:DISTANCE1
FRONT L;;14.0ft
CENTER;;;17.0ft
FRONT R;;15.0ft
PRNS L;;;17.0ft
PRNS R;;;17.0ft
Results of the speaker
distance from the
listening position
[<]/[>]:Select
[ENTER]:Return
A-E/CAT.
A-E/CAT.
A-E/CAT.
A-E/CAT.
RESULT:SIZE
FRONT L;;;;;;LRG
Results of the frequency
response of each speaker
RESULT:EXIT
p
p
WARNING (3)
. RESULT
.
SP :
5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
>SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
[<]/[>]:Select
[ENTER]:Return
RESULT:EQ
CENTER 1:100Hz;;;+2.5dB
2:300Hz;;;-0.5dB
3:1.5kHz;;+0.5dB
4:1.8kHz;;+2.5dB
5:1.8kHz;;-3.5dB
6:2.5kHz;;+2.5dB
7:10kHz;;;+2.5dB
[<]/[>]:Select
[ENTER]:Return
RESULT:WIRING
RESULT:LEVEL1
FRONT L;;;;;;;OK
FRONT L;;;+1.0dB
CENTER;;;;-1.5dB
FRONT R;;;+6.5dB
PRNS L;;;;-9.0dB
PRNS R;;;;+1.0dB
Results of the parametric
equalizer of each speaker
Results of the speaker
output level
[<]/[>]:Select
[ENTER]:Return
[<]/[>]:Select
[ENTER]:Return
35
AUTO SETUP
y
If you are not satisfied with the results or want to manually
adjust each parameter, run “MANUAL SETUP” (see
page 83).
10
Press ENTER to confirm your selection.
The top “SET MENU” display appears in the OSD.
PRESET/CH
Notes
PRESET/CH
RESULT:EXIT
ENTER
A-E/CAT.
A-E/CAT.
9
p
p
WARNING (3)
RESULT
.
SP :
5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
. >SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
Make sure the pointer is pointing at “SET”
and “CANCEL” and then press j / i to select
“SET” or “CANCEL”.
PRESET/CH
RESULT:EXIT
ENTER
A-E/CAT.
A-E/CAT.
p
p
WARNING (3)
RESULT
.
SP :
5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
. >SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
Choices: SET, CANCEL
• Select “SET” to confirm the “AUTO SETUP”
results.
• Select “CANCEL” to cancel the “AUTO SETUP”
results.
36
ENTER
A-E/CAT.
11
[ ]/[]:Up/Down
[ENTER]:Enter
A-E/CAT.
p
Press ENTER to return to the top
“RESULT:EXIT” display.
.;AUTOSETUP
;MANUALSETUP
.;SIGNAL INFO
p
8
SET MENU
• If you change speakers, speaker positions, or the layout of
your listening environment, run “AUTO SETUP” again to
recalibrate your system.
• The distances displayed in the “DISTANCE” results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the “EQ” results, different values may be set for the
same band to provide finer adjustments.
Press SET MENU to exit from “SET MENU”.
SET MENU
MENU
SRCH MODE
AUTO SETUP
■ If an error screen appears
■ If a warning screen appears
Press u / d / j / i to select “RETRY” or “EXIT”
and then press ENTER.
The following display is an example where “E-9:USER
CANCEL” appears in the OSD.
Warning messages inform you of potential problems
detected during the “AUTO SETUP” procedure.
ERROR
E-9:USER CANCEL
. Don't operate
any function.
Note
Warnings differ from errors in that warnings do not cancel the
“AUTO SETUP” procedure.
1
p
p
Choices: RETRY, EXIT
• Select “RETRY” to retry the “AUTO SETUP”
procedure.
• Select “EXIT” to exit from the “AUTO SETUP”
procedure.
PREPARATION
. >RETRY EXIT
[]/[]:Up/Down
[ENTER]:Enter
Make sure the pointer is pointing at
“WARNING” and then press ENTER to
display the detailed information about the
warning.
RESULT:EXIT
p
p
. WARNING (3)
RESULT
.
SP :
5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
>SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
y
The number on the right of “WARNING” indicates the
number of warning messages.
2
Press j / i repeatedly to toggle between the
warning displays.
RESULT:EXIT
p
p
. WARNING (3)
RESULT
.
SP :
5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
>SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
y
• For details about each warning message, see the “AUTO
SETUP” section in “TROUBLESHOOTING” on
page 112.
• When the corresponding warning message is not
applicable to a speaker, “– –” is displayed instead.
3
Press ENTER to return to the top
“RESULT:EXIT” display.
PRESET/CH
RESULT:EXIT
ENTER
A-E/CAT.
A-E/CAT.
p
p
WARNING (3)
RESULT
.
SP :
5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
. >SET CANCEL
[]/[]:Up/Down
[ENTER]:Enter
37
PLAYBACK
PLAYBACK
CAUTION
Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD
encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may
damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the
sound output level of your CD player before you play back a CD encoded in DTS.
(U.S.A. model)
3
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
EDIT
AUTO/MAN'L
INPUT
SPEAKERS
A
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MD
MULTI CH
INPUT
SLEEP
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
CD
OPTICAL
6,7 6
CODE SET
POWER
TV
AV
STANDBY
3
2
CD-R
2
SELECT
5
6
SPEAKERS
ENHANCER
9
0
ENTERTAIN
MOVIE
3
4
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
2
7
8
NIGHT
STRAIGHT
SET MENU
TITLE
MENU
SRCH MODE
BAND
A-E/CAT.
SOURCE
VOLUME
TV
V-AUX
DVR
VCR
Remote control
ENTER
AMP
TV CH
TUNER
The name of the currently selected input source
appears in the front panel display and in the OSD for
a few seconds.
EFFECT
LEVEL
TV VOL
Front panel
7
ENT.
10
PRESET/CH
PHONO
DTV
EXTD SUR. PURE DIRECT
SLEEP
MD
CD
MUSIC
1
STANDARD
POWER
MULTI CH IN
DVD
PHONO
5
STEREO
TRANSMIT
POWER
3
XM
CBL
or
2
CD-R
5
Available input sources
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
AUDIO
DISC SKIP
TV MUTE
TV INPUT
MUTE
VCR
(U.S.A. model)
DVR
V-AUX
DVD
1
2
DTV/CBL pDVD
MD/CD-R
TUNER
CD
PHONO
XM
VOLUME
SP
A
Turn on the video monitor connected to this
unit.
Currently selected
input source
Press SPEAKERS A or B on the front panel
(or set the component selector switch to
AMP and then press SPEAKERS on the
remote control repeatedly).
Each time you press SPEAKERS A or B, the
respective speakers are turned on or off.
dB
AUTO
L
Currently selected
input mode
Notes
• If you are to select an input source connected via digital
connections, set “INPUT MODE” to “AUTO” or “DTS”
(see page 41).
• For details about controlling XM Satellite Radio when
“XM” is selected as the input source, see page 62.
SPEAKERS
A
B
4
Front panel
or
AMP
SPEAKERS
SOURCE
9
TV
Remote control
38
R
Start playback on the selected source
component or select a broadcast station.
Refer to the operating instructions for the source
component.
See page 52 for details about tuning instructions.
PLAYBACK
5
Rotate VOLUME on the front panel (or press
VOLUME +/– on the remote control) to adjust
the volume to the desired output level.
VOLUME
or
VOLUME
7
Rotate the PROGRAM selector on the front
panel (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display and in the OSD.
See page 71 for details about sound field programs.
PROGRAM
Remote control
Front panel
6
Press TONE CONTROL on the front panel
repeatedly to select “TREBLE” or “BASS”
and then rotate the PROGRAM selector to
adjust the corresponding frequency
response level.
Front panel
or
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
BASIC
OPERATION
STEREO
PROGRAM
TONE CONTROL
EXTD SUR. PURE DIRECT
ENT.
10
EFFECT
Remote control
VCR
DVR
V-AUX
DTV/CBL pDVD
MD/CD-R
TUNER
CD
PHONO
XM
VOLUME
SP
A
TREBLE
dB
0dB
L
VCR
R
• Speaker and headphone adjustments are stored
independently.
• When “TONE BYPASS” is set to “AUTO” (see page 91),
and “BASS” and “TREBLE” are set to 0 dB, audio output
automatically bypasses the tone control circuitry of this
unit.
• If you increase or decrease the high-frequency or lowfrequency sound to an extreme level, the tonal quality of
the surround speakers may not match that of the front left
and right speakers.
• TONE CONTROL is not effective when the Pure Direct
mode (see page 45) is selected or when the component
connected to the MULTI CH INPUT jacks is selected as
the input source (see page 44).
• To enjoy multi-channel sources in surround, see page 48
for details.
V-AUX
DTV/CBL pDVD
MD/CD-R
TUNER
CD
PHONO
XM
VOLUME
SP
A
TV Sports
• Select “TREBLE” to adjust the high-frequency
response.
• Select “BASS” to adjust the low-frequency
response.
Notes
DVR
dB
L
R
Currently selected
surround field program
Notes
• Choose a sound field program based on your listening
preference, not merely on the name of the program.
• When you select an input source, this unit automatically
selects the last sound field program used with the
corresponding input source.
• Sound field programs cannot be selected when the
component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 44).
• Sampling frequencies higher than 48 kHz (except for DTS
96/24 signals) are sampled down to 48 kHz and then sound
field programs are applied.
• To display information about the currently selected input
source in the OSD, see page 46 for details.
39
USING AUDIO FEATURES
USING AUDIO FEATURES
Using SILENT CINEMA
SILENT CINEMA allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
sources, through ordinary headphones. SILENT CINEMA
activates automatically whenever you connect headphones
to the PHONES jack while listening to CINEMA DSP or
HiFi DSP sound field programs (see page 71). When
activated, the SILENT CINEMA indicator lights up in the
front panel display.
Selecting the night listening mode
The night listening modes are designed to improve
listenability at lower volumes or at night. Choose either
“NIGHT:CINEMA” or “NIGHT:MUSIC” depending on
the type of material you are playing.
1
Notes
• SILENT CINEMA does not activate when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (see page 44).
• SILENT CINEMA is not effective when the Pure Direct (see
page 45) or “2ch Stereo” mode (see page 45) is selected, or
when this unit is in the “STRAIGHT” mode (see page 45).
AMP
NIGHT
SOURCE
Choices: NIGHT:CINEMA, NIGHT:MUSIC, OFF
• Select “NIGHT:CINEMA” when watching films to
reduce the dynamic range of film soundtracks and
make dialog easier to hear at lower volumes.
• Select “NIGHT:MUSIC” when listening to music
sources to preserve ease-of-listening for all sounds.
• Select “OFF” if you do not want to use this feature.
Press MUTE on the remote control to mute the
audio output. Press MUTE again to resume the
audio output.
y
MUTE
• You can also rotate VOLUME on the front panel or VOLUME
+/– on the remote control to resume the audio output.
• You can adjust the muting level by using the “MUTING TYPE”
parameter in “SOUND MENU” (see page 91).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output is resumed.
10
TV
Muting the audio output
y
Set the component selector switch to AMP
and then press NIGHT on the remote control
repeatedly to select “NIGHT:CINEMA” or
“NIGHT:MUSIC”.
When a night listening mode is selected, the NIGHT
indicator lights up in the front panel display.
2
Press j / i on the remote control to adjust the
effect level while “NIGHT:CINEMA” or
“NIGHT:MUSIC” is displayed in the front
panel display.
PRESET/CH
Note
If you change the input source or the sound field program while
the audio output is being muted, this unit resumes the audio
output.
ENTER
A-E/CAT.
A-E/CAT.
Remote control
Effect.Lvl:MID
Choices: MIN, MID, MAX
• Select “MIN” for minimum compression.
• Select “MID” for standard compression.
• Select “MAX” for maximum compression.
40
USING AUDIO FEATURES
y
AUTO
“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are
stored independently.
Notes
DTS
• You cannot use the night listening modes in the following
cases:
– when the Pure Direct mode (see page 45) is selected.
– when the component connected to the MULTI CH
INPUT jacks is selected as the input source (see
page 44).
– when headphones are connected to the PHONES jack.
• The night listening modes may vary in effectiveness
depending on the input source and surround sound settings
you use.
Selecting the input mode
ANALOG
Note
When “INPUT MODE” is set to “AUTO”, this unit
automatically switches to the appropriate decoder if a Dolby
Digital or DTS signal is detected.
Using the sleep timer
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
• We recommend setting “INPUT MODE” to “AUTO” in most
cases.
• You can adjust the default input mode of this unit by using the
“INPUT MODE” parameter in “INPUT MENU” (see page 93).
Notes
Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to AC OUTLET(S) (see page 29).
1
• To play DTS-encoded CDs when using a digital audio
connection, be sure to set “INPUT MODE” to “DTS”.
• DTS decoding may not be performed correctly depending on
the player even if you make a digital connection between this
unit and the player.
Press one of the input selector buttons on
the remote control to select the desired input
source.
MD
CD
CD-R
SLEEP
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
PHONO
Rotate the INPUT selector on the front panel
to select the desired input source.
INPUT
2
2
Start playback on the selected source
component or select a broadcast station.
Refer to the operating instructions for the source
component.
See page 52 for details about tuning instructions.
Press INPUT MODE on the front panel
repeatedly to select the desired input mode.
INPUT MODE
Available input sources
VCR
DVR
V-AUX
DTV/CBL pDVD
MD/CD-R
TUNER
CD
PHONO
XM
VOLUME
SP
A
DVD
Currently selected
input source
dB
AUTO
L
R
Currently selected
input mode
41
BASIC
OPERATION
y
1
Automatically selects input signals in
the following order:
(1) Digital signals
(2) Analog signals
Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
Selects only analog signals. If no
analog signals are input, no sound is
output.
USING AUDIO FEATURES
3
Press SLEEP on the remote control
repeatedly to set the amount of time.
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP
Adjusting the speaker level
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
Note
This operation will override the level adjustments made in
“AUTO SETUP” (see page 32) and “SPEAKER LEVEL” (see
page 89).
SLEEP 120min
SLEEP OFF
y
SLEEP 90min
SLEEP 30min
SLEEP
60min
The SLEEP indicator flashes while you are switching
the amount of time for the sleep timer. Once the sleep
timer is set, the SLEEP indicator lights up in the front
panel display, and the display returns to the selected
sound field program.
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
SP
A
TUNER pCD
This operation can also be performed using the control buttons on
the front panel. Press NEXT on the front panel repeatedly to
select the speaker channel whose output level you want to adjust
and then press LEVEL +/– on the front panel to adjust the output
level.
AMP
SOURCE
TV VOL
VOLUME
SLEEP
dB
SLEEP 120min
L
VOLUME
1
TV
PHONO
XM
TV CH
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
R
10
ENT.
EFFECT
1
Flashes
PRESET/CH
LEVEL
SET MENU
TITLE
MENU
BAND
SRCH MODE
ENTER
A-E/CAT.
DISPLAY
XM MEMORY
ON SCREEN
REC
VCR
DVR
V-AUX
DTV/CBL
DVD
TUNER pCD
MD/CD-R
SP
A
AUDIO
PHONO
XM
STRAIGHT
R
1
Lights up
4
(U.S.A. model)
dB
L
To cancel the sleep timer, press SLEEP on
the remote control repeatedly until “SLEEP
OFF” appears in the front panel display.
Set the component selector switch to AMP
and then press LEVEL on the remote control
repeatedly to select the speaker you want to
adjust.
AMP
SOURCE
LEVEL
TV
BAND
TITLE
SLEEP
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER pCD
PHONO
XM
VOLUME
SP
A
SLEEP OFF
dB
L
R
The SLEEP indicator turns off, and “SLEEP OFF”
disappears from the front panel display after a few
seconds.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the
front panel) to set this unit to the standby mode.
42
2
DISC SKIP
VOLUME
SLEEP
3
A-E/CAT.
RETURN
USING AUDIO FEATURES
• Select “FRONT L” to adjust the front left speaker
output level.
• Select “CENTER” to adjust the center speaker
output level.
• Select “FRONT R” to adjust the front right speaker
output level.
• Select “SUR. R” to adjust the surround right
speaker output level.
• Select “SUR. B. R” to adjust the surround back
right speaker output level.
• Select “SUR. B. L” to adjust the surround back left
speaker output level.
• Select “SUR. L” to adjust the surround left speaker
output level.
• Select “SWFR” to adjust the subwoofer output
level.
• Select “PRES. R” to adjust the presence right
speaker output level.
• Select “PRES. L” to adjust the presence left
speaker output level.
• Once you press LEVEL on the remote control, you can
also select the speaker by pressing u / d.
• Instead of “SUR. B. R” and “SUR. B. L”, “SUR. B” is
displayed if “SUR. B L/R SP” is set to either “SMLx1” or
“LRGx1” (see page 87).
2
Press j / i on the remote control to adjust the
speaker output level.
• Press i to increase the value.
• Press j to decrease the value.
Control range: –10 dB to +10 dB
Compression artifacts (such as the MP3 format) are
created by a lossy compression scheme where the audio is
resampled to lower the bitrate and to remove sounds that
are indistinguishable to typical human hearing. The
Compressed Music Enhancer feature of this unit enhances
your listening experience by regenerating the missing
harmonics in a compression artifact. As a result, flattened
complexity due to the loss of high-frequency fidelity as
well as lack of bass due to the loss of low-frequency bass
is compensated, providing the improved performance of
the overall sound system.
Notes
• The Compressed Music Enhancer mode is compatible with the
PCM signals (32 kHz, 44.1 kHz and 48 kHz) and the analog 2channel input sources.
• The Compressed Music Enhancer mode is not effective with
any of the sound field programs.
• When the Compressed Music Enhancer mode is turned on while
an incompatible input source is being played back, “Not
Available” appears in the front panel display and in the OSD.
• When the input source is changed to an incompatible input
source while the Compressed Music Enhancer mode is turned
on, the Compressed Music Enhancer mode is automatically
turned off and the incompatible input source is played back in
2-channel or 7-channel stereo.
y
The ENHANCER indicator lights up in the front panel display
when one of the Compressed Music Enhancer modes is selected.
PRESET/CH
ENTER
A-E/CAT.
3
A-E/CAT.
Press ENTER on the remote control when
you have completed your adjustment.
PRESET/CH
ENTER
A-E/CAT.
A-E/CAT.
43
BASIC
OPERATION
y
Selecting the Compressed Music
Enhancer mode
USING AUDIO FEATURES
1
Set the component selector switch to AMP
and then press ENHANCER on the remote
control repeatedly to select the desired
Compressed Music Enhancer mode.
The following display is shown in the OSD and the
ENHANCER indicator lights up in the front panel
display.
AMP
ENHANCER
SOURCE
0
Selecting the MULTI CH INPUT
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 26) as the input
source.
Press MULTI CH INPUT on the front panel (or
MULTI CH IN on the remote control) so that
“MULTI CH INPUT” appears in the front panel
display.
TV
MULTI CH
INPUT
MULTI CH IN
or
Front panel
Remote control
MUSIC ENHANCER
2ch Stereo
. LOW
>HIGH
ENHANCER
MULTI CH INPUT
Lights up
Choices: 2ch Stereo, 7ch Stereo, Off
• Select “2ch Stereo” to play back compression
artifacts in 2-channel stereo.
• Select “7ch Stereo” to play back compression
artifacts in 7.1-channel stereo.
• Select “Off ” to turn off the Compressed Music
Enhancer mode.
Note
When you select “Off ”, this unit returns to the previously
selected sound field program.
2
Press j / i on the remote control to select the
desired effect level.
PRESET/CH
ENTER
A-E/CAT.
A-E/CAT.
Choices: HIGH, LOW
• Select “HIGH” for a high effect level.
• Select “LOW” for a low effect level.
Note
Set the effect level to “HIGH” or “LOW” according to the
characteristics of a source. The high-frequency signals of
some sources may be emphasized too much. In this case, set
the effect level to “LOW”.
44
Note
When “MULTI CH INPUT” is shown in the front panel display,
no other source can be played. To select another input source with
the INPUT selector on the front panel (or one of the input selector
buttons), press MULTI CH INPUT (or MULTI CH IN on the
remote control) so that “MULTI CH INPUT” disappears from the
front panel display.
USING AUDIO FEATURES
Enjoying multi-channel sources in
2-channel stereo
You can mix down multi-channel sources to 2 channels
and enjoy playback in 2-channel stereo.
Set the component selector switch to AMP and
then press STEREO on the remote control
repeatedly to select “2ch Stereo”.
AMP
STEREO
Enjoying pure hi-fi stereo sound
The Pure Direct mode turns off the video circuitry and the
front panel display, allowing sources to bypass the
decoders and DSP processors of this unit so that you can
enjoy pure hi-fi sound from 2-channel PCM and analog
sources.
Press PURE DIRECT on the front panel (or set
the component selector switch to AMP and then
press PURE DIRECT on the remote control) to
turn on or off the Pure Direct mode.
SOURCE
1
TV
PURE DIRECT
Front panel
or
2ch Stereo
AMP
PURE DIRECT
SOURCE
• You can use a subwoofer with this program when “LFE/BASS
OUT” is set to “SWFR” or “BOTH” (see page 88).
• You can also select the “2ch Stereo” mode by rotating the
PROGRAM selector on the front panel.
Enjoying unprocessed input
sources
When this unit is in the “STRAIGHT” mode, 2-channel
stereo sources are output from only the front left and right
speakers. Multi-channel sources are decoded straight into
the appropriate channels without any additional effect
processing.
1
Set the component selector switch to AMP
and then press STRAIGHT on the remote
control to select “STRAIGHT”.
AMP
STRAIGHT
SOURCE
ENT.
TV
EFFECT
STRAIGHT
2
8
BASIC
OPERATION
y
TV
Remote control
Notes
• To avoid unexpected noise, do not play CDs encoded in DTS
when this unit is in the Pure Direct mode.
• When multi-channel signals (Dolby Digital and DTS) are input,
this unit automatically switches to the corresponding analog
input. When “DTS” is selected as the input mode (see page 41),
no sound will be output.
• No sound will be output from the subwoofer.
• The front panel display automatically dims.
• The following operations are not possible when this unit is in
the Pure Direct mode:
– switching the sound field program
– displaying the OSD
– adjusting the “SET MENU” parameters (except for speaker
level settings)
– operating video functions (video conversion, etc.)
• The Pure Direct mode is automatically canceled whenever this
unit is turned off.
y
• The indicator around the PURE DIRECT button on the front
panel lights up while this unit is in the Pure Direct mode.
• The front panel display turns on momentarily when an
operation is performed.
To deactivate the “STRAIGHT” mode, press
STRAIGHT on the remote control again so
that “STRAIGHT” disappears from the front
panel display.
The sound effect is turned back on.
y
You can also select the “STRAIGHT” mode by pressing
STRAIGHT (EFFECT) on the front panel.
45
USING VIDEO FEATURES
USING VIDEO FEATURES
Signal format FORMAT
Signal format display. When this unit cannot detect a
digital signal, it automatically switches to analog
input.
Display status: Analog, Digital, DolbyD, DTS, PCM,
---
Displaying the input source
information
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
1
Note
Set the component selector switch to AMP
and then press SET MENU on the remote
control.
The top “SET MENU” display appears in the OSD.
“---” appears when this unit cannot detect any signals.
Sampling frequency SAMPLING
The number of samples per second taken from a
continuous signal to make a discrete signal.
Display status: 32kHz, 44.1kHz, 48kHz, 64kHz,
88.2kHz, 96kHz, ---
AMP
SET MENU
SOURCE
MENU
SRCH MODE
TV
Note
“---” appears when this unit cannot detect the sampling
frequency.
SET MENU
Channel CHANNEL
The number of source channels in the input signal
(front/surround/LFE). For example, a multi-channel
soundtrack with 3 front channels, 2 surround
channels and LFE, is displayed as “3/2/0.1”.
.;AUTOSETUP
;MANUALSETUP
.;SIGNAL INFO
p
p
[ ]/[]:Up/Down
[ENTER]:Enter
Note
2
Press d repeatedly to select “SIGNAL INFO”
and then press ENTER.
The following information about the input source
appears in the OSD.
PRESET/CH
“---” appears when there is no source channel available.
Bit rate BITRATE
The number of bits passing a given point per second.
Note
PRESET/CH
“---” appears when this unit cannot detect the bit rate.
ENTER
A-E/CAT.
A-E/CAT.
;SIGNAL INFO
FORMAT
PCM
SAMPLING
48kHz
CHANNEL 2/0/--BITRATE 2/0/--FLAG
NONE
[RETURN]:Exit
46
Flag FLAG
Flag data encoded in DTS, Dolby Digital, or PCM
signals that cue this unit to automatically switch
decoders.
ENTER
A-E/CAT.
A-E/CAT.
3
Press SET MENU on the remote control again
to exit from “SET MENU”.
SET MENU
MENU
SRCH MODE
USING VIDEO FEATURES
Selecting the OSD mode
You can display the operating information of this unit on a
video monitor. If you display the “SET MENU” and sound
field program parameter settings on a video monitor, it is
much easier to see the available options and parameters
than it is to read the information in the front panel display.
1
Turn on the video monitor connected to this
unit.
2
Set the component selector switch to AMP
and then press DISPLAY on the remote
control repeatedly to toggle between the
OSD modes.
The OSD mode changes in the following order.
AMP
SOURCE
ON SCREEN
TV
Full display
You can display a gray background in the OSD when there
is not video signal being input by setting “GRAY BACK” in
“OPTION MENU” to “AUTO” (see page 95).
Notes
• The OSD signal is not output at the DVR/VCR OUT jacks
and will not be recorded.
• You must set “VIDEO CONV.” in “OPTION MENU” to
“ON” (see page 94) to display the OSD.
• To display the OSD with the component video signals
output at the COMPONENT VIDEO MONITOR OUT
jacks, set the OSD mode to the full display mode.
• When “GRAY BACK” in “OPTION MENU” is set to
“OFF” (see page 95), the OSD may not be displayed
correctly depending on the conditions of the picture.
Playing video sources in the
background
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons on the remote
control to select a video source and then an
audio source.
Short display
SLEEP
MD
CD
CD-R
XM
Display off
Audio sources
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
PHONO
Full display
Fully shows the sound field program parameter
settings as well as the contents of the front panel
display.
Short display
Briefly shows the contents of the front panel display
at the bottom of the screen each time you operate this
unit.
Display off
No information is displayed except for the “SET
MENU” screen.
P02
Video sources
Note
If you want to enjoy an audio source input at the MULTI CH
INPUT jacks together with a video source, first select the video
source and then press MULTI CH INPUT on the front panel (or
MULTI CH IN on the remote control) to select the component
connected to the MULTI CH INPUT jacks as the input source
(see page 44).
MUSIC
.
Pop/Rock
DSP LEVEL;;;;0dB
P.INIT.DLY;;21ms
P.ROOM SIZE;;1.0
S.INIT.DLY;;25ms
S.ROOM SIZE;;1.0
Full display
P02
MUSIC
Pop/Rock
Short display
47
BASIC
OPERATION
DISPLAY
y
ENJOYING SURROUND SOUND
ENJOYING SURROUND SOUND
Enjoying multi-channel sources in
surround
If you connected surround back speakers, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital EX
or DTS-ES decoders.
1
Set the component selector switch to AMP
and then press EXTD SUR. on the remote
control repeatedly to switch between 5.1 and
6.1/7.1-channel playback.
Decoders
You can select from the following decoders depending on
the format of the source you are playing.
Decoder
Functions
Plays back Dolby Digital or DTS signals
PLIIxMovie in 7.1 channels using the Pro Logic IIx
movie decoder.
Plays back Dolby Digital or DTS signals
PLIIxMusic in 6.1/7.1 channels using the Pro Logic
IIx music decoder.
EX/ES
Plays back Dolby Digital or DTS signals
in 6.1/7.1 channels using the Dolby
Digital EX or DTS-ES decoder.
EX
Plays back Dolby Digital or DTS signals
in 6.1/7.1 channels using the Dolby
Digital EX decoder.
AMP
EXTD SUR.
SOURCE
7
TV
2
Press j / i repeatedly to select a decoder
while “PLIIxMusic” (etc.) is displayed.
Notes
PRESET/CH
ENTER
A-E/CAT.
A-E/CAT.
Auto AUTO
When a signal flag that can be recognized by this unit is
input, this unit selects the optimum decoder to play back
the signal in 6.1/7.1 channels.
If this unit cannot recognize the flag or no flag is present
in the input signal, it cannot automatically be played in
6.1/7.1 channels.
48
Off OFF
Decoders are not used to create 6.1/7.1 channels.
• “PLIIxMovie” is available only when “SUR. B L/R SP” (see
page 87) is set to “SMLx2” or “LRGx2”.
• Some 6.1/7.1-channel compatible discs do not have a signal flag
that can be automatically detected by this unit. When playing
these kinds of discs in 6.1/7.1 channels, select a decoder
manually from “PLIIx Music”, “EX/ES” or “EX”.
• 6.1/7.1-channel playback is not possible even if you press
EXTD SUR. in the following cases:
– when “SUR. L/R SP” (see page 87) or “SUR. B L/R SP” (see
page 87) is set to “NONE”.
– when the component connected to the MULTI CH INPUT
jacks is being played.
– when the source being played does not contain surround left
and right channel signals.
– when a Dolby Digital KARAOKE source is being played.
– when the “2ch Stereo” (see page 45) or Pure Direct (see
page 45) mode is selected.
• When this unit is set to the standby mode, this setting will be
reset to “AUTO”.
• The Pro Logic IIx decoder is not available when “SUR. B L/R
SP” is set to “NONE” (see page 87).
ENJOYING SURROUND SOUND
Enjoying 2-channel sources in
surround
Signals input from 2-channel sources can also be played
back on multi-channels.
1
Set the component selector switch to AMP
and then press STANDARD on the remote
control repeatedly to switch between the
“SUR. STANDARD” and “SUR. ENHANCED”
programs or press MOVIE to select the
“MOVIE THEATER” program.
SUR. STANDARD
Functions
PRO LOGIC
Dolby Pro Logic processing for any
sources
PLII Movie
Dolby Pro Logic II processing for
movie sources
PLII Music
Dolby Pro Logic II processing for
music sources
PLII Game
Dolby Pro Logic II processing for
game sources
PLIIx Movie
Dolby Pro Logic IIx processing for
movie sources
PLIIx Music
Dolby Pro Logic IIx processing for
music sources
PLIIx Game
Dolby Pro Logic IIx processing for
game sources
Neo:6 Cinema
DTS processing for movie sources
Neo:6 Music
DTS processing for music sources
Neural Sur.
Neural Surround processing for any
sources
(U.S.A. and Canada models only)
SUR. ENHANCED
or
MOVIE THEATER
Functions
STANDARD
5
AMP
SOURCE
or
TV
MOVIE
2
Press SELECT on the remote control
repeatedly to select the desired decoder.
SELECT
6
You can select from the following modes depending
on the type of source you are playing and your
personal preference.
y
You can also select a decoder by pressing j / i on the remote
control while the decoder type is displayed in the front panel
display.
PRO LOGIC
Dolby Pro Logic processing for any
sources
PLII Movie
Dolby Pro Logic II processing for
movie sources
PLIIx Movie
Dolby Pro Logic IIx processing for
movie sources
Neo:6 Cinema
DTS processing for movie sources
Notes
• The Pro Logic IIx decoder is not available when “SUR. B L/R
SP” is set to “NONE” (see page 87).
• The Neural Surround decoder is compatible with the PCM
signals (32 kHz, 44.1 kHz and 48 kHz) and the analog 2channel input sources.
• The Neural Surround decoder is not effective with any of the
sound field programs.
• When Neural Surround-incompatible signals are being input
while the Neural Surround decoder is selected, multi-channel
sources are decoded straight into the appropriate channels
without any additional effect processing and the Neural
Surround-incompatible PCM signals are played back in stereo.
49
BASIC
OPERATION
4
ENJOYING SURROUND SOUND
Using Virtual CINEMA DSP
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
If you set “SUR. L/R SP” to “NONE” (see page 87),
Virtual CINEMA DSP activates automatically whenever
you select a CINEMA DSP sound field program (see
page 71).
Note
Virtual CINEMA DSP will not activate even when “SUR. L/R
SP” is set to “NONE” (see page 87) in the following cases:
– when the component connected to the MULTI CH INPUT
jacks is selected as the input source (see page 44).
– when headphones are connected to the PHONES jack.
– when the Pure Direct (see page 45) or “2ch Stereo” mode (see
page 45) is selected, or when this unit is in the “STRAIGHT”
mode (see page 45).
50
RECORDING
RECORDING
Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
CAUTION
The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in
noise being recorded. Therefore, if you want to use this unit to record sources encoded in DTS, the
following considerations and adjustments need to be made. To play DTS-encoded DVDs and CDs
(when using a digital audio connection) on your DTS-compatible player, follow its operating
instructions to make a setting so that the analog signal will be output from the player.
Notes
y
Do a test recording before you start an actual recording.
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.
(U.S.A. model)
1
Turn on all the connected components.
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the source
component you want to record from.
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
SEARCH MODE
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
DISPLAY
CATEGORY
EDIT
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
MD
INPUT
2
CD
SLEEP
XM
MULTI CH IN
CBL
or
CODE SET
CD-R
DVD
DTV
TUNER
V-AUX
DVR
VCR
TRANSMIT
PHONO
POWER
POWER
TV
AV
STANDBY
POWER
MD
CD
2
CD-R
SLEEP
1
XM
Front panel
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
TV VOL
TV CH
VOLUME
Remote control
PHONO
AMP
SOURCE
TV
3
Start playback on the selected source
component or select a broadcast station.
4
Start recording on the recording component.
(U.S.A. model)
51
BASIC
OPERATION
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The settings of TONE CONTROL (see page 39), VOLUME, the speaker level (see page 89) and the sound field programs (see
page 71) do not affect recorded material.
• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing
video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an
S-video or a composite video signal on your VCR.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Likewise,
analog signals input at the AUDIO IN jacks are not output at the DIGITAL OUTPUT jack. Therefore, if your source component is
connected to provide only digital or analog signals, you can only record digital or analog signals.
• A given input source is not output on the same OUT (REC) channel.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.
• The XM Satellite Radio signals (U.S.A. model only) cannot be output at the AUDIO OUT (REC) jacks.
• The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.
FM/AM TUNING
FM/AM TUNING
There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and
there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use
the automatic and manual preset tuning features to store up to 40 stations (A1 to E8: 8 preset station numbers in each of
the 5 preset station groups). Furthermore, you can recall any preset stations and exchange the assignment of two preset
stations with each other.
Note
Orient the connected FM and AM antennas for the best reception.
Automatic tuning
3
Automatic tuning is effective when station signals are
strong and there is no interference.
Press TUNING MODE (AUTO/MAN’L) so that
the AUTO indicator lights up in the front
panel display.
TUNING MODE
(U.S.A. model)
DISPLAY
AUTO/MAN'L
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
SEARCH MODE
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
TUNING MODE
DISPLAY
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
MEMORY
CATEGORY
EDIT
AUTO/MAN'L
INPUT
SPEAKERS
A
VCR
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
DVR
V-AUX
DTV/CBL
MD/CD-R pTUNER
DVD
CD
S VIDEO
VIDEO
L
AUDIO
R
OPTICAL
A
3
1
2 4
1
PHONO
XM
VOLUME
AUTO TUNED
SP
A
EFFECT
SILENT CINEMA
3
dB
AM 1440 kHz
No colon (:)
L
R
Lights up
If a colon (:) appears in the front panel display, tuning
is not possible. Press PRESET/TUNING (EDIT) to
turn the colon (:) off.
Rotate the INPUT selector to select “TUNER”
as the input source.
INPUT
PRESET/TUNING
SEARCH MODE
EDIT
4
Front panel
2
Press FM/AM to select the reception band.
“FM” or “AM” appears in the front panel display.
FM/AM
FM
or
Press PRESET/TUNING/CH l / h once to
begin automatic tuning.
When this unit is tuned into a station, the TUNED
indicator lights up and the frequency of the received
station is shown in the front panel display.
• Press h to tune into a higher frequency.
• Press l to tune into a lower frequency.
AM
l PRESET/TUNING/CH h
LEVEL
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
CD
AUTO TUNED
PHONO
XM
VOLUME
SP
A
A
dB
AM 1530 kHz
Lights up
52
L
R
FM/AM TUNING
Manual tuning
3
If the signal received from the station you want to select is
weak, tune into it manually.
Press TUNING MODE (AUTO/MAN’L) so that
the AUTO indicator disappears from the front
panel display.
TUNING MODE
Note
DISPLAY
AUTO/MAN'L
Manually tuning into an FM station automatically switches the
tuner to monaural reception to increase the signal quality.
(U.S.A. model)
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
CD
TUNED
A
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
SEARCH MODE
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
LEVEL
MAN'L/AUTO FM
NEXT
+
PROGRAM
PHONES
dB
AM 1440 kHz
L
R
TUNING MODE
AUTO/MAN'L
No colon (:)
INPUT
SPEAKERS
A
VOLUME
DISPLAY
CATEGORY
EDIT
PHONO
XM
SP
A
VOLUME
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
If a colon (:) appears in the front panel display, tuning
is not possible. Press PRESET/TUNING (EDIT) to
turn the colon (:) off.
EFFECT
S VIDEO
SILENT CINEMA
3
2 4
1
VIDEO
L
AUDIO
R
OPTICAL
3
PRESET/TUNING
BASIC
OPERATION
SEARCH MODE
1
Rotate the INPUT selector to select “TUNER”
as the input source.
EDIT
4
INPUT
Press PRESET/TUNING/CH l / h to tune
into the desired station manually.
Hold down the button to continue searching.
l PRESET/TUNING/CH h
Front panel
2
LEVEL
Press FM/AM to select the reception band.
“FM” or “AM” appears in the front panel display.
FM/AM
FM
or
AM
53
FM/AM TUNING
Automatic preset tuning
3
You can use the automatic preset tuning feature to store
FM stations with strong signals up to 40 (A1 to E8: 8
preset station numbers in each of the 5 preset station
groups) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset station number as well as the MEMORY
and AUTO indicators flashes. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher
frequencies.
(U.S.A. model)
MEMORY
MAN'L/AUTO FM
VOLUME
PURE DIRECT
STANDBY
/ON
Flash
PRESET/TUNING
SEARCH MODE
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
LEVEL
MAN'L/AUTO FM
NEXT
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
EDIT
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
VCR
MULTI CH
INPUT
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
AUTO TUNED
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
CD
MEMORY
OPTICAL
A1:FM 87.5 MHz
2
1
PHONO
XM
VOLUME
SP
A
EFFECT
dB
L
R
3
Flashes
1
Rotate the INPUT selector to select “TUNER”
as the input source.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
y
INPUT
You can specify the preset number from which this unit
stores FM stations and/or begins tuning toward lower
frequencies. For details, see “Automatic preset tuning
options” on page 55.
Front panel
2
Press FM/AM to select “FM” as the reception
band.
“FM” appears in the front panel display.
FM/AM
54
Notes
FM
• Any stored station data existing under a preset station
number is cleared when you store a new station under the
same preset station number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after
searching for all the available stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station
you want to store is weak in signal strength, tune into it
manually and store it as described in “Manual preset
tuning” on page 55.
FM/AM TUNING
■ Automatic preset tuning options
You can specify the preset number from which this unit
stores FM stations and/or begins tuning toward lower
frequencies.
Note
Manual preset tuning
You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
(U.S.A. model)
First carry out steps 1 through 3 in “Automatic preset tuning” on
page 54.
VOLUME
• Press A/B/C/D/E and then PRESET/TUNING/
CH l / h to select the preset station number
under which the first station will be stored.
Automatic preset tuning stops when stations have all
been stored up to E8.
A/B/C/D/E
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
PRESET/TUNING/CH
MEMORY
PHONES
TUNING MODE
DISPLAY
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
3 4
LEVEL
OPTICAL
1
2,5
Tune into a station automatically or manually.
See pages 52 and 53 for tuning instructions.
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
CD
PHONO
XM
VOLUME
TUNED
SP
A
A
l PRESET/TUNING/CH h
dB
AM
630 kHz
L
R
SEARCH MODE
EDIT
LEVEL
When this unit is tuned into a station, the front panel
display shows the frequency of the station received.
2
Press MEMORY (MAN’L/AUTO FM).
The MEMORY indicator flashes in the front panel
display for approximately 5 seconds.
MEMORY
MEMORY
MAN'L/AUTO FM
Flashes
3
Press A/B/C/D/E repeatedly to select a preset
station group (A to E) while the MEMORY
indicator is flashing.
The selected preset station group letter appears.
Check that the colon (:) appears in the front panel
display.
A/B/C/D/E
CATEGORY
NEXT
Flashes
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
TUNED
CD
MEMORY
PHONO
XM
VOLUME
SP
A
C :AM
dB
630 kHz
L
R
Preset station Colon (:)
group
55
BASIC
OPERATION
• Press PRESET/TUNING so that the colon (:)
disappears from the front panel display and
then press PRESET/TUNING/CH l to begin
tuning toward lower frequencies.
PRESET/TUNING
R
l PRESET/TUNING/CH h
CATEGORY
NEXT
A/B/C/D/E
CATEGORY
EDIT
FM/AM TUNING
4
Press PRESET/TUNING/CH l / h to select a
preset station number (1 to 8) while the
MEMORY indicator is flashing.
• Press h to select a higher preset station number.
• Press l to select a lower preset station number.
Selecting preset stations
You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored.
(U.S.A. model)
l PRESET/TUNING/CH h
VOLUME
LEVEL
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
Flashes
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
TUNED
CD
PHONO
XM
AUTO/MAN'L
INPUT
SPEAKERS
A
VCR
TUNING MODE
DISPLAY
CATEGORY
EDIT
PHONES
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
VOLUME
MEMORY
SP
A
dB
C3:AM
630 kHz
L
R
1 2
Preset station number
MUSIC
STEREO
5
Press MEMORY (MAN’L/AUTO FM) while the
MEMORY indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected. The MEMORY indicator
disappears from the front panel display.
DTV/CBL
DVD
MD/CD-R pTUNER
CD
TUNED
PHONO
XM
VOLUME
SP
A
C3:AM
dB
630 kHz
L
R
The displayed station has been stored as C3.
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
10
ENT.
1
EFFECT
PRESET/CH
LEVEL
SET MENU
TITLE
MENU
BAND
SRCH MODE
ENTER
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
2
REC
(U.S.A. model)
1
V-AUX
4
6
When performing this operation with the remote control, set the
component selector switch to SOURCE and then press TUNER
to select “TUNER” as the input source.
MAN'L/AUTO FM
DVR
MOVIE
3
2
SELECT
5
y
MEMORY
VCR
ENTERTAIN
1
STANDARD
Press A/B/C/D/E on the front panel (or A-E/
CAT. j / i on the remote control) to select the
desired preset station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.
Repeat steps 1 through 5 to store other
stations.
PRESET/CH
A/B/C/D/E
Notes
• Any stored station data existing under a preset station
number is cleared when you store a new station under the
same preset station number.
• The reception mode (stereo or monaural) is stored along
with the station frequency.
56
or
CATEGORY
NEXT
Front panel
ENTER
A-E/CAT.
A-E/CAT.
Remote control
FM/AM TUNING
2
Press PRESET/TUNING/CH l / h on the
front panel (or PRESET/CH u / d on the
remote control) to select the desired preset
station number (1 to 8).
The preset station group and number appear in the
front panel display along with the station band and
frequency.
Exchanging preset stations
You can exchange the assignments of two preset stations
with each other. The example below describes the
procedure to exchange preset station “E1” with “A5”.
(U.S.A. model)
VOLUME
PRESET/CH
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
or
LEVEL
ENTER
PHONES
V-AUX
DTV/CBL
PRESET/TUNING/CH
MEMORY
A-E/CAT.
DVD
MD/CD-R pTUNER
CD
LEVEL
MAN'L/AUTO FM
+
TUNED
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
S VIDEO
VIDEO
L
AUDIO
R
OPTICAL
1,3
1
Select preset station “E1” using A/B/C/D/E
and PRESET/TUNING/CH l / h.
See “Selecting preset stations” on page 56.
2
Press and hold EDIT for more than 3
seconds.
“E1” and the MEMORY indicator flash in the front
panel display.
R
PRESET/TUNING
SEARCH MODE
EDIT
Flashes
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
TUNED
CD
MEMORY
PHONO
XM
VOLUME
SP
A
E1:FM 87.5 MHz
dB
L
R
Flashes
57
BASIC
OPERATION
E1:FM 87.5 MHz
STRAIGHT
2,4
dB
L
VIDEO AUX
B
EFFECT
VOLUME
SP
A
AUTO/MAN'L
INPUT
SILENT CINEMA
PHONO
XM
TUNING MODE
DISPLAY
NEXT
SPEAKERS
A
Remote control
Front panel
DVR
A/B/C/D/E
CATEGORY
EDIT
PROGRAM
A-E/CAT.
VCR
FM/AM
SEARCH MODE
l PRESET/TUNING/CH h
OPTIMIZER
MIC
FM/AM TUNING
3
Select preset station “A5” using A/B/C/D/E
and PRESET/TUNING/CH l / h.
“A5” and the MEMORY indicator flash in the front
panel display.
See “Selecting preset stations” on page 56.
l PRESET/TUNING/CH h
A/B/C/D/E
CATEGORY
LEVEL
NEXT
Flashes
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
TUNED
CD
PHONO
XM
VOLUME
MEMORY
SP
A
dB
A5:FM 90.6 MHz
L
R
Flashes
4
Press EDIT again.
“EDIT E1–A5” appears in the front panel display and
the assignments of the two preset stations are
exchanged.
PRESET/TUNING
SEARCH MODE
EDIT
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R pTUNER
TUNED
CD
PHONO
XM
VOLUME
SP
A
EDIT
58
dB
E1-A5
L
R
XM® SATELLITE RADIO TUNING
XM® SATELLITE RADIO TUNING
XM Satellite Radio is the satellite radio service with millions of listeners across the United States, broadcasting live
daily. The XM Satellite Radio channel lineup includes more than 150 digital channels of choice from coast to coast: 67
commercial-free music channels, featuring hip hop to opera, classical to country, bluegrass to blues; 33 channels of
premier sports, talk, comedy, children’s and entertainment programming; and more than 20 channels of the traffic and
weather information for major metropolitan areas nationwide.
Because XM Satellite Radio is a subscription service, you will need to set up an account and activate service with XM
using your XM Satellite Radio ID number. To check your ID number, follow “Activating XM Satellite Radio” on
page 61. For further information on XM Satellite Radio services, visit the XM Satellite Radio website at
“http://www.xmradio.com/”.
This unit is equipped with the Neural Surround decoder (U.S.A. and Canada models only) that plays back the surround
sound content of the XM Satellite Radio broadcasts in multi-channels, resulting in a full surround sound experience.
Notes
■ Information from XM Satellite Radio Inc.
Hardware and required basic monthly subscription sold separately. Premium Channel available at additional monthly cost. Installation
costs and other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only. All fees and
programming subject to change. Channels with frequent explicit language are indicated with an “XL”. Channel blocking is available for
XM radio receivers by calling “1-800-XM-RADIO (1-800-967-2346)”. Subscriptions subject to Customer Agreement available at
xmradio.com. Only available in the 48 continuous United States. © 2005 XM Satellite Radio Inc. All rights reserved. All other
trademarks are the property of their respective owners.
Connecting the XM Connect-and-Play digital antenna accessory
Connect the XM Connect-and-Play digital antenna accessory (sold separately) to the XM jack on the rear panel of this
unit. For details, see the operating instructions provided with the XM Connect-and-Play digital antenna accessory.
XM Connect-and-Play
digital antenna accessory
(sold separately)
(U.S.A. model)
XM
59
BASIC
OPERATION
• The XM Satellite Radio service is only available in the 48 contiguous United States (not available in Alaska and Hawaii).
• XM Connect-and-Play digital antenna accessory and monthly subscription are sold separately. For details, visit the XM Satellite Radio
website at “http://www.xmradio.com/”.
• For information on obtaining the XM Connect-and-Play digital antenna accessory, visit the XM Satellite Radio website at
“http://www.xmradio.com/” or consult your local retailer that sells XM Ready products.
• To ensure the optimal reception of the XM Satellite Radio signals, the XM Connect-and-Play digital antenna accessory must be placed
at or near a southerly facing window with no obstacles in the path to the sky. You can mount it indoors or outdoors.
XM® SATELLITE RADIO TUNING
XM Satellite Radio controls and functions
Note
The following controls are available only when “XM” is selected as the input source. Rotate the INPUT selector on the front panel (or
set the component selector switch to SOURCE and then press XM on the remote control) to select “XM” as the input source.
■ Front panel functions
■ Remote control functions
(U.S.A. model)
PRESET/TUNING
SEARCH MODE
CODE SET
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
LEVEL
MAN'L/AUTO FM
NEXT
+
PROGRAM
STRAIGHT
POWER
TV
AV
STANDBY
POWER
DISPLAY
CATEGORY
EDIT
INPUT
TONE CONTROL
INPUT MODE
MD
AUTO/MAN'L
MULTI CH
INPUT
1
CD
CD-R
SLEEP
XM
2
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
TV INPUT
MUTE
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
10
LEVEL
SET MENU
TITLE
MENU
SRCH MODE
BAND
AMP
SOURCE
TV VOL
1
2
3
4 5
TV CH
VOLUME
TV
3
4
2 CATEGORY
(All Channel Search mode)
Changes the channel category while staying in the All
Channel Search mode.
(Category Search mode)
Changes the channel category.
(Preset Search mode)
Changes the preset channel group (A to E).
3 PRESET/TUNING/CH l / h
(All Channel Search mode)
Searches for a channel within all channels. Press and hold
for quick search.
(Category Search mode)
Searches for a channel within the selected category. Press
and hold for quick search.
(Preset Search mode)
Changes the preset channel number (1 to 8).
4 MEMORY (MAN’L/AUTO FM)
Stores a preset channel in the memory (see page 67).
5 DISPLAY
Displays the XM Satellite Radio information such as
channel number, channel name, category, artist name, or
song title displayed in the front panel display or in the
OSD (see page 68).
5
6
ENTER
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
7
REC
Set to SOURCE.
1 SEARCH MODE
Changes the search mode between the All Channel
Search, Category Search, and Preset Search modes
(see page 63).
ENT.
EFFECT
PRESET/CH
PHONO
EFFECT
TV MUTE
STEREO
TRANSMIT
POWER
(U.S.A. model)
1 XM
Selects “XM” as the input source.
2 Numeric buttons
(All Channel Search or Category Search mode)
Use 1 to 9 and 0 to enter a channel number directly.
(Preset Search mode)
Use 1 to 8 to enter a preset channel number directly.
3 Cursor buttons u / d / j / i
(All Channel Search mode)
Press A-E/CAT. j / i to change the channel category.
Press PRESET/CH u / d to search for a channel within
all channels. Press and hold for quick search.
(Category Search mode)
Press A-E/CAT. j / i to change the channel category.
Press PRESET/CH u / d to search for a channel within
the selected category. Press and hold for quick search.
(Preset Search mode)
Press A-E/CAT. j / i to change the preset channel group
(A to E).
Press PRESET/CH u / d to change the preset channel
number (1 to 8).
4 XM MEMORY
Stores a preset channel in the memory (see page 67).
5 ENT.
Confirms an entered channel number in the Direct
Number Access mode (see page 66).
6 SRCH MODE
Changes the search mode between the All Channel
Search, Category Search, and Preset Search modes
(see page 63).
7 DISPLAY
Displays the XM Satellite Radio information such as
channel number, channel name, category, artist name, or
song title displayed in the front panel display or in the
OSD (see page 68).
60
XM® SATELLITE RADIO TUNING
Activating XM Satellite Radio
2
To sign up for an account with the XM Satellite Radio
service, an XM Satellite Radio ID number is required.
Follow the procedure below to check your ID number, and
then visit the website at “http://activate.xmradio.com/” or
call “1-800-XM-RADIO (1-800-967-2346)” with a major
credit card handy for signing up.
Check the XM Satellite Radio reception level
and adjust the orientation of the XM Connectand-Play digital antenna accessory for a
better percentage of the reception level.
y
You can display the XM Satellite Radio reception level by
using the “XM ANTENNA” parameter in “OPTION
MENU” (see page 96).
(U.S.A. model)
Notes
VOLUME
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
EDIT
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
3
1
VIDEO
L
AUDIO
R
OPTICAL
1
Rotate the INPUT selector on the front panel
(or set the component selector switch to
SOURCE and then press XM on the remote
control) to select “XM” as the input source.
The cursor on the left of the XM indicator lights up in
the front panel display.
3
Press PRESET/TUNING/CH l / h on the
front panel (or PRESET/CH u / d on the
remote control) to select channel “0”.
PRESET/CH
INPUT
l PRESET/TUNING/CH h
or
ENTER
LEVEL
A-E/CAT.
A-E/CAT.
Front panel
Front panel
or
AMP
Remote control
Note
SOURCE
XM
You cannot select channel “0” if the All Channel Search
mode (see page 63) is not selected.
TV
Remote control
4
Lights up
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
XM RADIO
Check the XM Satellite Radio ID number
displayed in the front panel display and write
it down.
ID:_____________________________________
dB
L
R
61
BASIC
OPERATION
• If “CHECK ANTENNA” appears in the front panel
display, the XM Connect-and-Play digital antenna
accessory may not be connected to the XM jack on the
rear panel of this unit properly. See “Connecting the XM
Connect-and-Play digital antenna accessory” on page 59
and check the connection.
• The “XM ANTENNA” parameter in “OPTION MENU”
(see page 96) cannot be adjusted by using the remote
control. Instead, you need to adjust the orientation of the
XM Connect-and-Play digital antenna accessory
connected to the XM jack of this unit for a better
percentage of the reception level.
PURE DIRECT
STANDBY
/ON
XM® SATELLITE RADIO TUNING
y
Basic XM Satellite Radio
operations
When you select “XM” as the input source, this unit
automatically recalls the previously selected channel.
Note
(U.S.A. model)
The XM Satellite Radio signals cannot be output at the
AUDIO OUT (REC) jacks.
VOLUME
2
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
A/B/C/D/E
SEARCH MODE
OPTIMIZER
MIC
PRESET/TUNING/CH
MEMORY
EDIT
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
Search for a channel by using one of the XM
Satellite Radio search modes.
See “Selecting the XM Satellite Radio search mode”
on page 63 for details.
y
1
TV
AV
CD
CD-R
SLEEP
MD
1
• You can use the Neural Surround decoder to enjoy the
surround sound content of the XM Satellite Radio
broadcasts in multi-channels (see page 49).
• You can set the XM Satellite Radio preset channels (see
page 67).
• You can display the XM Satellite Radio information in the
front panel display or in the OSD (see page 68).
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
TV VOL
TV CH
VOLUME
PHONO
AMP
SOURCE
TV
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
1
MOVIE
(U.S.A. model)
1
Rotate the INPUT selector on the front panel
(or set the component selector switch to
SOURCE and then press XM on the remote
control) to select “XM” as the input source.
The cursor on the left of the XM indicator lights up in
the front panel display and the XM Satellite Radio
information (such as channel number, channel name,
category, artist name, or song title) for the currently
selected channel appears in the front panel display.
INPUT
Front panel
or
AMP
SOURCE
XM
TV
Remote control
Lights up
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
[001] Preview
62
dB
L
R
XM® SATELLITE RADIO TUNING
Selecting the XM Satellite Radio
search mode
2
You can search for the desired channel using one of the
three search modes (All Channel Search, Category Search,
and Preset Search modes). You can also enter the channel
number directly to select the desired channel by using the
Direct Number Access mode (see page 66).
Press SEARCH MODE on the front panel (or
SRCH MODE on the remote control)
repeatedly to select “ALL CH SEARCH”.
PRESET/TUNING
SET MENU
or
SEARCH MODE
MENU
EDIT
SRCH MODE
Front panel
Remote control
■ All Channel Search mode
(U.S.A. model)
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
dB
ALL CH SEARCH
VOLUME
L
R
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
EDIT
AUTO/MAN'L
SPEAKERS
A
3
INPUT
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
TV
3 4
AV
L
AUDIO
R
OPTICAL
Press CATEGORY on the front panel (or
A-E/CAT. j / i on the remote control)
repeatedly to change the channel category.
1
PRESET/CH
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
A/B/C/D/E
SLEEP
MD
1
CD
CD-R
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
PHONO
or
CATEGORY
10
ENTER
NEXT
EXTD SUR. PURE DIRECT
A-E/CAT.
A-E/CAT.
ENT.
EFFECT
AMP
PRESET/CH
LEVEL
SOURCE
TV VOL
TV CH
VOLUME
TV
1
TITLE
SET MENU
MENU
SRCH MODE
BAND
ENTER
A-E/CAT.
TV MUTE
STEREO
TV INPUT
MUSIC
MUTE
ENTERTAIN
MOVIE
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
2
3-4
REC
(U.S.A. model)
1
Rotate the INPUT selector on the front panel
(or set the component selector switch to
SOURCE and then press XM on the remote
control) to select “XM” as the input source.
Front panel
4
Remote control
Press PRESET/TUNING/CH l / h on the
front panel (or PRESET/CH u / d on the
remote control) repeatedly to search for a
channel within all channels.
PRESET/CH
l PRESET/TUNING/CH h
or
LEVEL
ENTER
A-E/CAT.
A-E/CAT.
INPUT
Front panel
Remote control
y
You can search for a channel quickly by pressing and
holding PRESET/TUNING/CH l / h on the front panel
(or PRESET/CH u / d on the remote control).
Front panel
or
AMP
SOURCE
XM
TV
Remote control
63
BASIC
OPERATION
2
VIDEO
XM® SATELLITE RADIO TUNING
■ Category Search mode
2
(U.S.A. model)
VOLUME
Press SEARCH MODE on the front panel (or
SRCH MODE on the remote control)
repeatedly to select “CAT SEARCH”.
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
SET MENU
PRESET/TUNING
TUNING MODE
DISPLAY
CATEGORY
EDIT
NEXT
LEVEL
MAN'L/AUTO FM
+
PHONES
INPUT
SPEAKERS
A
STRAIGHT
TONE CONTROL
INPUT MODE
SRCH MODE
EDIT
VIDEO AUX
B
MENU
or
AUTO/MAN'L
SEARCH MODE
PROGRAM
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
Front panel
2
3 4
1
VCR
MD
1
CD
CD-R
SLEEP
XM
MULTI CH IN
CBL
DVD
DTV
PHONO
V-AUX
DVR
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
TUNER
VCR
SELECT
6
7
8
ENHANCER
NIGHT
STRAIGHT
9
0
10
SOURCE
TV CH
VOLUME
TV
1
TITLE
MENU
SRCH MODE
ENTER
STEREO
TV INPUT
MUSIC
MUTE
ENTERTAIN
MOVIE
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
dB
L
R
ENT.
SET MENU
BAND
A-E/CAT.
TV MUTE
V-AUX
CAT SEARCH
EFFECT
PRESET/CH
LEVEL
DVR
SP
A
EXTD SUR. PURE DIRECT
5
SPEAKERS
AMP
TV VOL
Remote control
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
2
3-4
3
Press CATEGORY on the front panel (or
A-E/CAT. j / i on the remote control)
repeatedly to change the channel category.
PRESET/CH
REC
(U.S.A. model)
A/B/C/D/E
or
CATEGORY
1
Rotate the INPUT selector on the front panel
(or set the component selector switch to
SOURCE and then press XM on the remote
control) to select “XM” as the input source.
A-E/CAT.
A-E/CAT.
Remote control
Front panel
4
INPUT
ENTER
NEXT
Press PRESET/TUNING/CH l / h on the
front panel (or PRESET/CH u / d on the
remote control) repeatedly to search for a
channel within the selected channel
category.
Front panel
PRESET/CH
or
AMP
l PRESET/TUNING/CH h
SOURCE
or
XM
ENTER
LEVEL
A-E/CAT.
TV
A-E/CAT.
Remote control
Front panel
Remote control
y
You can search for a channel quickly by pressing and
holding PRESET/TUNING/CH l / h on the front panel
(or PRESET/CH u / d on the remote control).
64
XM® SATELLITE RADIO TUNING
■ Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see “Setting the XM Satellite Radio preset
channels” on page 67.
2
Press SEARCH MODE on the front panel (or
SRCH MODE on the remote control)
repeatedly to select “PRESET SEARCH”.
PRESET/TUNING
y
SET MENU
or
SEARCH MODE
All preset channels (A1 to E8) recalls “001 Preview” by the initial
factory setting.
MENU
SRCH MODE
EDIT
Front panel
Remote control
(U.S.A. model)
VOLUME
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
PURE DIRECT
SP
A
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
EDIT
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
AUTO/MAN'L
L
R
INPUT
SPEAKERS
A
dB
PRESET SEARCH
TUNING MODE
DISPLAY
CATEGORY
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
3
2
CD-R
SLEEP
STEREO
1
2
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
XM
CBL
DVD
DTV
TUNER
PHONO
V-AUX
DVR
VCR
MUSIC
ENTERTAIN
MOVIE
3
4
PRESET/CH
EXTD SUR. PURE DIRECT
10
ENT.
A/B/C/D/E
EFFECT
AMP
PRESET/CH
LEVEL
SOURCE
TV VOL
TV CH
VOLUME
TV
1
SET MENU
TITLE
MENU
BAND
SRCH MODE
ENTER
A-E/CAT.
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
or
CATEGORY
2
3-4
ENTER
NEXT
A-E/CAT.
Remote control
Front panel
REC
A-E/CAT.
(U.S.A. model)
4
1
Rotate the INPUT selector on the front panel
(or set the component selector switch to
SOURCE and then press XM on the remote
control) to select “XM” as the input source.
Press PRESET/TUNING/CH l / h on the
front panel (or PRESET/CH u / d on the
remote control) repeatedly to change the
preset channel number (1 to 8).
PRESET/CH
INPUT
l PRESET/TUNING/CH h
or
LEVEL
Front panel
Front panel
ENTER
A-E/CAT.
A-E/CAT.
Remote control
or
y
AMP
SOURCE
XM
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) on the remote control.
TV
Remote control
65
BASIC
OPERATION
CD
1
MULTI CH IN
MD
1
3 4
Press CATEGORY on the front panel (or
A-E/CAT. j / i on the remote control)
repeatedly to change the preset channel
group (A to E).
XM® SATELLITE RADIO TUNING
■ Direct Number Access mode
TV
AV
MD
1
CD
CD-R
XM
MULTI CH IN
CBL
DVD
3
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
3
4
SLEEP
DTV
TUNER
3
1
2
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
PHONO
V-AUX
VCR
DVR
AMP
EFFECT
PRESET/CH
SOURCE
TV VOL
TV CH
VOLUME
TV
3
2
ENT.
10
1
LEVEL
SET MENU
TITLE
MENU
SRCH MODE
BAND
ENTER
A-E/CAT.
TV MUTE
STEREO
TV INPUT
MUSIC
A-E/CAT.
MUTE
ENTERTAIN
MOVIE
RETURN
DISPLAY
XM MEMORY
ON SCREEN
Press the numeric buttons on the remote
control to enter the desired three-digit
channel number.
For example, to enter the number 123, press the
numeric buttons as shown below.
STEREO
MUSIC
ENTERTAIN
1
2
3
REC
AUDIO
DISC SKIP
(U.S.A. model)
1
The display changes as follows.
VCR
Set the component selector switch to
SOURCE and then press XM on the remote
control to select “XM” as the input source.
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
dB
<XM> --1
L
R
AMP
SOURCE
VCR
XM
2
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
TV
dB
<XM> -12
Press SRCH MODE on the remote control
repeatedly to select “ALL CH SEARCH” or
“CAT SEARCH”.
VCR
DVR
V-AUX
DTV/CBL
DVD
L
MD/CD-R
TUNER
CD pXM
R
PHONO
VOLUME
SP
A
dB
<XM>123
L
R
SET MENU
MENU
SRCH MODE
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
dB
ALL CH SEARCH
L
R
or
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
CAT SEARCH
STEREO
MUSIC
1
2
STRAIGHT
ENT.
EFFECT
PHONO
VOLUME
SP
A
66
Press the numeric buttons and ENT. on the
remote control to enter the desired one-digit
or two-digit channel number.
For example, to enter the number 12, press the
numeric buttons as shown below.
dB
L
R
y
• Instead of pressing ENT. to tune into the channel
immediately, you can wait a few seconds until this unit
confirms the entered channel number.
• If no button is pressed within a few seconds after you enter
a one-digit or two-digit number, this unit automatically
confirms the entered channel number.
• Pressing a button other than the numeric buttons or ENT.
cancels the Direct Number Access mode procedure.
XM® SATELLITE RADIO TUNING
Setting the XM Satellite Radio
preset channels
2
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
on page 65.
Press MEMORY on the front panel (or XM
MEMORY on the remote control).
The MEMORY indicator flashes in the front panel
display for approximately 5 seconds.
MEMORY
or
RETURN
XM MEMORY
MAN'L/AUTO FM
Front panel
Remote control
(U.S.A. model)
VOLUME
MEMORY
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
A/B/C/D/E
SEARCH MODE
OPTIMIZER
MIC
PRESET/TUNING/CH
MEMORY
LEVEL
MAN'L/AUTO FM
NEXT
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
EDIT
AUTO/MAN'L
Flashes
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
Note
3 4
MUSIC
ENTERTAIN
MOVIE
3
4
1
2
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
3
EXTD SUR. PURE DIRECT
10
ENT.
EFFECT
PRESET/CH
LEVEL
TITLE
SET MENU
MENU
SRCH MODE
BAND
3-4
ENTER
A-E/CAT.
2,5
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
(U.S.A. model)
Press CATEGORY on the front panel (or
A-E/CAT. j / i on the remote control)
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
PRESET/CH
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
See “Selecting the XM Satellite Radio search mode”
on page 63 for details.
A/B/C/D/E
or
CATEGORY
ENTER
NEXT
A-E/CAT.
Remote control
Front panel
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
[040] Deep Tra
Flashes
VOLUME
SP
A
A-E/CAT.
dB
L
R
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
CD pXM
TUNER
MEMORY
PHONO
VOLUME
SP
A
Currently selected channel number
C
dB
[040] Deep
L
R
Currently selected preset channel group
67
BASIC
OPERATION
STEREO
You must proceed to and carry out steps 3 through 5 while
the MEMORY indicator is flashing in the front panel
display.
2,5
XM® SATELLITE RADIO TUNING
4
Press PRESET/TUNING/CH l / h on the
front panel (or PRESET/CH u / d on the
remote control) repeatedly to select a preset
channel number (1 to 8) while the MEMORY
indicator is flashing.
The preset channel number appears in the front panel
display.
Displaying the XM Satellite Radio
information
You can display the XM Satellite Radio information (such
as channel number, channel name, category, artist name,
or song title) for the currently selected channel in the front
panel display or in the OSD.
(U.S.A. model)
PRESET/CH
VOLUME
l PRESET/TUNING/CH h
or
PURE DIRECT
ENTER
STANDBY
/ON
LEVEL
A-E/CAT.
A-E/CAT.
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
DISPLAY
CATEGORY
EDIT
NEXT
LEVEL
MAN'L/AUTO FM
+
PROGRAM
PHONES
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
Front panel
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
CD pXM
TUNER
MEMORY
R
OPTICAL
PHONO
VOLUME
dB
C5 [040] Deep
L
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
R
Currently selected preset channel number
EXTD SUR. PURE DIRECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
10
ENT.
EFFECT
PRESET/CH
LEVEL
TITLE
SET MENU
MENU
SRCH MODE
BAND
ENTER
Press MEMORY on the front panel (or XM
MEMORY on the remote control) to set the
selected XM Satellite Radio channel as a
preset channel while the MEMORY indicator
is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
MEMORY
XM MEMORY
Front panel
VCR
Remote control
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
C5:[040] Deep
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
DISPLAY
REC
(U.S.A. model)
Note
If a status message or an error message appears in the front panel
display or in the OSD, see the “XM Satellite Radio (U.S.A.
model only)” section in “TROUBLESHOOTING” on page 110
for appropriate remedies.
■ Displaying the XM Satellite Radio
information in the front panel display
RETURN
or
MAN'L/AUTO FM
Press DISPLAY on the front panel or on the
remote control repeatedly to toggle between the
following XM Satellite Radio information display
modes.
dB
L
R
TUNING MODE
DISPLAY
AUTO/MAN'L
Colon (:)
Note
Once you set a new preset channel, the one previously
stored in the same preset channel group and number is
cleared.
68
AUDIO
DISPLAY
SP
A
5
L
Remote control
Flashes
VCR
VIDEO
Channel number / name
Front panel
or
Channel category
DISPLAY
ON SCREEN
Remote control
Artist name / Song title
XM® SATELLITE RADIO TUNING
When the channel number / name is displayed:
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
PHONO
VOLUME
SP
A
dB
[040] Deep Tra
■ Displaying the XM Satellite Radio
information in the OSD
L
R
Press DISPLAY on the front panel or on the
remote control.
The following screen is displayed in the OSD.
When the channel category is displayed:
TUNING MODE
VCR
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
dB
L
Front panel
DVR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER
CD pXM
Coldplay / Clo
XM INFORMATION
dB
L
R
p
y
Note
If you press DISPLAY while the XM Satellite Radio information
display is scrolling from right to left in the front panel display, the
XM Satellite Radio information display mode toggles as
described above.
y
• You can select the amount of time while the XM Satellite Radio
information is displayed in the OSD by using the “XM
DISPLAY” parameter in “OPTION MENU” (see page 96).
• To hold the XM Satellite Radio information screen, press
ENTER on the remote control while it is being displayed in the
OSD.
• The XM Satellite Radio information screen on hold is released
if you press ENTER on the remote control again or if you
change the XM Satellite Radio channel.
• This unit can save up to two XM Satellite Radio information
screens for future reference. To view the previous two XM
Satellite Radio information screens, press TITLE on the remote
control repeatedly while the current XM Satellite Radio
information screen is being on hold.
69
BASIC
OPERATION
• The front panel display can indicate up to 14 alphanumeric
characters at once. You can set whether to display the XM
Satellite Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at once by
using the “SCROLL” parameter in “OPTION MENU” (see
page 96).
• If the XM Satellite Radio information contains a character that
cannot be recognized by this unit, the character will be replaced
with a space.
p
ALL CH SEARCH
XM
:040
CHAN :Deep Tracks
CAT
:Rock
NAME :Coldplay
TITLE :Clocks
.( Coldplay / Clo )
[]/[]:CHANNEL
[<]/[>]:CATEGORY
PHONO
VOLUME
SP
A
Remote control
R
When the artist name / song title is displayed:
VCR
ON SCREEN
AUTO/MAN'L
PHONO
VOLUME
SP
A
<CAT>Rock
DISPLAY
or
DISPLAY
SOUND FIELD PROGRAMS
SOUND FIELD PROGRAMS
What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In
addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and
shape of the room in which we are sitting.
■ Elements of a sound field
There are two distinct types of sound reflections that combine to make up the sound field in addition to the direct sound
coming straight to our ears from the player’s instrument.
Early reflections
Reflected sounds reach our ears extremely rapidly (50 ms to 100 ms after the direct sound), after reflecting from one
surface only (for example, from a wall or the ceiling). Early reflections actually add clarity to the direct sound.
Reverberations
These are caused by reflections from more than one surface (for example, from the walls, and the ceiling) so numerous
that they merge together to form a continuous sonic afterglow. They are non-directional and lessen the clarity of the direct
sound.
Direct sound, early reflections and subsequent reverberations taken together help us to determine the subjective size and
shape of the room, and it is this information that the digital sound field processor reproduces in order to create sound
fields.
If you could create the appropriate early reflections and subsequent reverberations in your listening room, you would be
able to create your own listening environment. The acoustics in your room could be changed to those of a concert hall, a
dance floor, or a room with virtually any size at all. This ability to create sound fields at will is exactly what YAMAHA
has done with the digital sound field processor.
Selecting sound field programs
Notes
• Choose a sound field program based on your listening preference, not merely on the name of the program.
• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input
source (see page 44).
• Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs
are applied.
■ Front panel operations
■ Remote control operations
(U.S.A. model)
AMP
AMP
SOURCE
TV VOL
TV CH
VOLUME
VOLUME
TV
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
SEARCH MODE
OPTIMIZER
MIC
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
LEVEL
MAN'L/AUTO FM
NEXT
+
PROGRAM
PHONES
TUNING MODE
DISPLAY
CATEGORY
EDIT
AUTO/MAN'L
VIDEO AUX
B
STRAIGHT
TV INPUT
MUTE
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
INPUT
SPEAKERS
A
TV MUTE
STEREO
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EXTD SUR. PURE DIRECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
Sound field program
selector buttons
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
10
ENT.
EFFECT
PRESET/CH
PROGRAM selector
Rotate the PROGRAM selector on the front panel.
The name of the selected sound field program appears in
the front panel display and in the OSD.
70
(U.S.A. model)
Set the component selector switch to AMP and
then press one of the sound field program
selector buttons on the remote control
repeatedly.
The name of the selected sound field program appears in
the front panel display and in the OSD.
SOUND FIELD PROGRAMS
Sound field program descriptions
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field
processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set “INPUT MODE”
to “AUTO” (see page 41) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.
Notes
• The DSP sound field programs of this unit are recreations of real-world acoustic environments made from precise measurements taken
in the actual concert hall, music venue, movie theater, etc. Thus, you may notice variations in the strength of the reflections coming
from the front, back, left and right.
• Choose a sound field program based on your listening preference, not merely on the name of the program itself.
■ For movie/video sources
You can select from the following sound fields when playing movie or video sources. The sound fields marked “MULTI”
can be used with multi-channel sources, like DVD, digital TV, etc. Those marked “2-CH” can be used with 2-channel
stereo sources like TV programs, video tapes, etc.
y
Rotate the PROGRAM selector on the front panel (or set the component selector switch to AMP and then press one of the sound field
program selector buttons on the remote control) to select the desired sound field program (see page 70).
Remote
control
button
Sound field program
Features
STEREO
2ch Stereo
Downmixes multi-channel sources to 2 channels or plays back 2-channel
sources as they are.
2
MUSIC
Pop/Rock
CINEMA DSP processing. Creates an enthusiastic atmosphere where you can
feel as if you are in an actual jazz or rock concert.
ENTERTAINMENT
TV Sports
CINEMA DSP processing. Reproduces the sound environment of a large concert
hall using the surround sound field to enhance your experience of watching
various TV programs such as news, variety shows, music programs or sports
programs.
ENTERTAINMENT
Mono Movie
CINEMA DSP processing. Reproduces monaural video sources (such as old
movies) at the optimum reverberation level to create sound depth using only the
presence sound field.
ENTERTAINMENT
Game
CINEMA DSP processing. Adds a deep and spatial feeling to video game
sounds.
3
MULTI
2-CH
71
SOUND FIELD
PROGRAMS
1
Sources
SOUND FIELD PROGRAMS
Remote
control
button
Sound field program
Features
MOVIE THEATER
Spectacle
CINEMA DSP processing. This program reproduces the extremely wide sound
field of a 70-mm movie theater in detail, making both the video and the sound
field incredibly real. This is ideal for any kind of video source encoded in Dolby
Surround, Dolby Digital or DTS, especially large-scale movie productions.
MOVIE THEATER
Sci-Fi
CINEMA DSP processing. This program reproduces dialog and sound effects in
the latest sound form for science fiction films, thus creating a broad and
expansive cinematic space amid silence. You can enjoy science fiction films
encoded in Dolby Surround, Dolby Digital or DTS in a virtual-space sound field
employing the most advanced techniques.
MOVIE THEATER
Adventure
CINEMA DSP processing. This program reproduces the sound design of the
newest 70-mm and multi-channel soundtrack films similar to the sound field of
the newest movie theaters, so the reverberations of the sound field itself are
restrained as much as possible.
MOVIE THEATER
General
CINEMA DSP processing. This program reproduces sounds from 70-mm and
multi-channel soundtrack films characterized by soft and extensive sound field.
SUR. STANDARD
Standard processing for the selected decoder.
SUR. ENHANCED
Enhanced processing for the selected decoder.
4
Sources
MULTI
2-CH
5
■ For music sources
You can select from the following sound fields when playing music sources, like CD, FM/AM broadcasting, tapes, etc.
y
Rotate the PROGRAM selector on the front panel (or set the component selector switch to AMP and then press one of the sound field
program selector buttons on the remote control) to select the desired sound field program (see page 70).
Remote
control
button
Sound field program
Features
STEREO
2ch Stereo
Plays back 2-channel sources.
STEREO
7ch Stereo
Plays back 2-channel sources from all speakers in 7.1 channels, providing a
larger sound field ideal for background music at parties, etc.
MUSIC
Hall in Vienna
HiFi DSP processing. The program reproduces a classic shoe-box type concert
hall with approximately 1700 seats. Pillars and ornate carvings create extremely
complex reflections which produce a very full, rich sound.
MUSIC
The Bttm Line
HiFi DSP processing. This program reproduces the stage front in “The Bottom
Line”, a famous New York jazz club where 300 people can be seated.
MUSIC
The Roxy Thtr
HiFi DSP processing. This program reproduces the dynamic rock music
environment of “The Roxy Theatre”, one of the hottest rock clubs in L.A.The
listener’s imaginary seat is at the center-left of the hall.
ENTERTAINMENT
Disco
HiFi DSP processing. This program reproduces the acoustic environment of a
lively disco in the heart of a big city to create a highly concentrated and
energetic sound.
SUR. STANDARD
Standard processing for the selected decoder.
SUR. ENHANCED
Enhanced processing for the selected decoder.
2-CH
1
2
3
5
72
Sources
MULTI
2-CH
SOUND FIELD PROGRAMS
Changing sound field parameter
settings
2
Turn on the video monitor and then press
DISPLAY on the remote control.
The following display is shown in the OSD.
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial
factory settings, you can change some of the parameters to
better suit the input source or your listening room.
DISPLAY
ON SCREEN
Notes
• Use the “PARAM. INI” feature in “OPTION MENU” to
initialize the parameters of each sound field program within a
sound field program group (see page 95).
• When you set a sound field parameter to a value other than the
initial factory settings, an asterisk mark (*) appears by the
sound field parameter name in the OSD.
• You cannot change the sound field parameter values when
“MEMORY GUARD” in “OPTION MENU” is set to “ON”
(see page 95). If you want to change the sound field parameter
values, set “MEMORY GUARD” to “OFF”.
Sound field program category
P02
Cursor
MUSIC
.
Pop/Rock
DSP LEVEL;;;;0dB
P.INIT.DLY;;21ms
P.ROOM SIZE;;1.0
S.INIT.DLY;;25ms
S.ROOM SIZE;;1.0
Sound field parameters
Sound field parameter
values
y
CODE SET
POWER
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
3
Press one of the sound field program
selector buttons repeatedly to select the
desired sound field program you want to
adjust.
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
EXTD SUR.
DIRECT ST.
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
SOUND FIELD
PROGRAMS
• For details about the function and control range of each sound
field parameter, see page 74.
• Repeat steps 3 and 4 as necessary to change other sound field
program parameter settings.
• The available sound field parameters for some of the sound field
programs may be displayed on more than one page in the OSD.
In this case, press u / d to scroll through pages.
• If you press and hold j / i to change the sound field parameter
value, the initial factory settings are shown momentarily in the
front panel display.
TRANSMIT
POWER
TV
AV
CD
CD-R
STANDBY
POWER
STANDARD
MD
SLEEP
SELECT
3
EXTD SUR. PURE DIRECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
10
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
10
ENT.
EFFECT
ENT.
EFFECT
PRESET/CH
PHONO
1
LEVEL
TITLE
SET MENU
MENU
SRCH MODE
BAND
AMP
ENTER
SOURCE
TV VOL
TV CH
A-E/CAT.
A-E/CAT.
VOLUME
TV
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
4
2
AUDIO
(U.S.A. model)
1
Set the component selector switch to AMP.
4
Press u / d to select the desired sound field
parameter and then j / i to change the
selected sound field parameter value.
• Press i to increase the value.
• Press j to decrease the value.
PRESET/CH
AMP
SOURCE
TV
ENTER
A-E/CAT.
A-E/CAT.
73
SOUND FIELD PROGRAMS
■ Sound field parameter descriptions
You can adjust the values of certain digital sound field parameters so that the sound fields are recreated accurately in your
listening room. Not all of the following parameters are found in every program.
y
To change sound field parameter settings to suit your listening environment, see page 73 for details.
Sound field parameter
DSP LEVEL
Features
DSP level. Adjusts the level of all the DSP effect sounds within a narrow range. Depending on
the acoustics of your listening room, you may want to increase or decrease the DSP effect level
relative to the level of the direct sound.
Control range: –6 dB to +3 dB
INIT.DLY
P.INIT.DLY
S.INIT.DLY
SB INI.DLY
Initial delay. Presence, surround, and surround back initial delay. Changes the apparent distance
from the source sound by adjusting the delay between the direct sound and the first reflection
heard by the listener. The smaller the value, the closer the sound source seems to the listener. The
larger the value, the farther it seems. For a small room, set to a small value. For a large room, set
to a large value.
Control range: 1 to 99 ms (INIT.DLY and P.INIT.DLY)
1 to 49 ms (S.INIT.DLY and SB INI.DLY)
Source sound
Level
Level
Level
Early
reflections
Time
Time
Time
Delay
Delay
Delay
Sound source
Reflection face
Small value = 1 ms
74
Large value = 99 ms
SOUND FIELD PROGRAMS
Sound field parameter
ROOM SIZE
P.ROOM SIZE
S.ROOM SIZE
SB ROOM SIZE
Features
Room size. Presence, surround, and surround back room size. Adjusts the apparent size of the
surround sound field. The larger the value, the larger the surround sound field becomes. As the
sound is repeatedly reflected around a room, the larger the hall is, the longer the time between
the original reflected sound and the subsequent reflections. By controlling the time between the
reflected sounds, you can change the apparent size of the virtual venue. Changing this parameter
from one to two doubles the apparent length of the room.
Control range: 0.1 to 2.0
Time
Early
reflections
Level
Level
Level
Source sound
Time
Time
Sound source
Small value = 0.1
Liveness. Surround and surround back liveness. Adjusts the reflectivity of the virtual walls in the
hall by changing the rate at which the early reflections decay. The early reflections of a sound
source decay much faster in a room with acoustically absorbent wall surfaces than in one which
has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to as
“dead”, while a room with highly reflective surfaces is referred to as “live”. This parameter lets
you adjust the early reflection decay rate and thus the “liveness” of the room.
Control range: 0 to 10
Source sound
Time
Small reflected
sound
Small value = 0
Level
Dead
Level
Level
Live
Time
Time
Large reflected
sound
Large value = 10
75
SOUND FIELD
PROGRAMS
LIVENESS
S.LIVENESS
SB LIVENESS
Large value = 2.0
SOUND FIELD PROGRAMS
Sound field parameter
REV.TIME
Features
Reverberation time. Adjusts the amount of time taken for the dense, subsequent reverberation
sound to decay by 60 dB at 1 kHz. This changes the apparent size of the acoustic environment
over an extremely wide range. Set a longer reverberation time for “dead” sources and listening
room environments, and a shorter time for “live” sources and listening room environments.
Control range: 1.0 to 5.0 s
Reverberation
Source sound
Reverberation
Early reflections
60 dB
REV.TIME
Sound source
60 dB
REV.TIME
Short
reverberation
REV.TIME
Long
reverberation
Small value = 1.0 s
REV.DELAY
60 dB
Large value = 5.0 s
Reverberation delay. Adjusts the time difference between the beginning of the direct sound and
the beginning of the reverberation sound. The larger the value, the later the reverberation sound
begins. A later reverberation sound makes you feel as if you are in a larger acoustic environment.
Level
Control range: 0 to 250 ms
Source sound
REV. LEVEL
Time
76
SOUND FIELD PROGRAMS
Sound field parameter
REV.LEVEL
Features
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
stronger the reverberation becomes.
Level
Control range: 0 to 100%
Source sound
(dB)
60 dB
Reverberation
Time
REV.DELAY
DIALG.LIFT
REV.TIME
Dialog lift. Adjust the height of the front and center channel sounds by assigning some of the
front and center channel elements to the presence speakers. The larger the parameter, the higher
the position of the front and center channel sound.
Choices: 0, 1, 2, 3, 4, 5
2ch Stereo
DIRECT
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi
stereo sound when playing 2-channel analog sources.
Choices: AUTO, OFF
y
SOUND FIELD
PROGRAMS
• The “AUTO” setting bypasses the decoders and DSP processors only when “BASS” and
“TREBLE” are set to 0 dB (see page 39).
• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
channels and output from the front left and right speakers.
• The low-frequency signals input from the front left and right speakers are redirected to the
subwoofer in the following cases:
– “LFE/BASS OUT” is set to “BOTH” (see page 88).
– “FRONT SP” is set to “SMALL” (see page 86) and “LFE/BASS OUT” is set to “SWFR”
(see page 88).
7ch Stereo
CT LEVEL
SL LEVEL
SR LEVEL
SB LEVEL
PL LEVEL
PR LEVEL
7-channel stereo center, surround left, surround right, surround back, presence left and presence
right levels. Adjusts the volume level of each channel in the 7-channel stereo mode.
Control range: 0 to 100%
77
SOUND FIELD PROGRAMS
Sound field parameter
Features
PRO LOGIC IIx Music
PRO LOGIC II Music
PANORAMA
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround
speakers as well as the front speakers for a wraparound effect.
PRO LOGIC IIx Music
PRO LOGIC II Music
DIMENSION
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards
the front or towards the rear.
Choices: OFF, ON
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
PRO LOGIC IIx Music
PRO LOGIC II Music
CENTER WIDTH
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output
completely towards the center speaker or towards the front left and right speakers. A larger value
moves the center channel output towards the front left and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
DTS Neo:6 Music
C.IMAGE
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the
center channel to make the center channel more or less dominant as necessary.
Control range: 0.0 to 1.0
Initial setting: 0.3
y
The “PRO LOGIC IIx Music”, “PRO LOGIC II Music”, and “DTS Neo:6 Music” parameters can be set only when “SUR.
STANDARD” is selected. Set the component selector switch to AMP and then press STANDARD on the remote control repeatedly to
select “SUR. STANDARD” (see page 49).
78
SOUND FIELD PROGRAMS
Sound field program speaker layouts
Sound output from each speaker depends on the type of audio signals being input. Refer to the diagrams in the table
below to understand the speaker layout for each sound field program.
Note
Be advised that there may be no or not enough sound output from speakers depending on the type of input source being played back.
Furthermore, there may be some channels that can only be used partially when they are adjusted to specific aspects of movies, such as
special sound effects, etc.
y
Except for “2ch Stereo”, “7ch Stereo”, and “STRAIGHT”, you can select a decoder to output sound from the surround back speakers
(see page 48).
The abbreviations and symbols used in each diagram are as follows:
L
Front left speaker
SL
Surround left speaker
SBR
Surround back right speaker
C
Center speaker
SR
Surround right speaker
PL
Presence left speaker
R
Front right speaker
SBL
Surround back left speaker
PR
Presence right speaker
Speaker from which sound is being output
Speaker from which no sound is being output
When the q EX / q PL IIx / ES indicators are turned off in the front panel display
When the q EX / q PL IIx / ES indicators are lit up and “PRIORITY” is set to “PRch” (see page 88)
*3 When the q EX / q PL IIx / ES indicators are lit up and “PRIORITY” is set to “SBch” (see page 88)
*1
*2
STEREO
2ch Stereo
2-channel
audio
(monaural)
PL
L
SL
STEREO
7ch Stereo
SBL SBR
PL
L
SL
MUSIC
Hall in Vienna
The Bttm Line
The Roxy Thtr
ENTERTAINMENT
Disco
PR
C
SBL SBR
PL
L
SL
L
SR
SL
SBL SBR
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
PL
R
PR
C
2-channel
audio
(stereo)
SBL SBR
PL
R
L
SR
SL
L
SR
SL
SBL SBR
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
PL
R
PR
C
5.1/6.1/7.1channel audio
*1
SBL SBR
PL
R
L
SR
SL
L
SR
SL
SBL SBR
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
PL
R
PR
C
5.1/6.1/7.1channel audio
*2
SBL SBR
PL
R
L
SR
SL
L
SR
SL
SBL SBR
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
PL
R
PR
C
5.1/6.1/7.1channel audio
*3
L
SR
SL
SR
PR
C
SBL SBR
PL
R
R
R
SR
PR
C
SBL SBR
R
SR
79
SOUND FIELD
PROGRAMS
Sound field program
SOUND FIELD PROGRAMS
Sound field program
MUSIC
Pop/Rock
ENTERTAINMENT
TV Sports
Mono Movie
Game
MOVIE THEATER
Spectacle
Sci-Fi
Adventure
General
2-channel
audio
(monaural)
PL
PR
C
L
SL
PL
SBL SBR
PL
SL
SBL SBR
PR
L
SR
SL
PL
L
SR
SL
SL
SBL SBR
SR
SL
L
SL
SBL SBR
PL
L
SL
SBL SBR
SR
SL
L
SL
SBL SBR
Music
80
C
SBL SBR
C
SBL SBR
PL
L
SR
SL
SL
L
SR
SL
R
SR
PR
C
SBL SBR
R
SR
PL
R
L
SR
SL
PR
C
SBL SBR
R
SR
Cinema/Music
R
SR
SBL SBR
SBL SBR
SBL SBR
PL
L
SR
SL
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
5.1/6.1/7.1channel audio
*2
R
PR
C
PL
R
Pro Logic IIx
PR
C
SR
Pro Logic II
R
Cinema
PL
L
PR
L
PR
C
SBL SBR
PR
C
PL
R
PL
R
Music
SUR. STANDARD
Neo:6 Cinema
Neo:6 Music
SL
Pro Logic
PR
C
SR
PR
L
Movie/Game
PL
C
PL
L
PL
R
PR
C
SBL SBR
5.1/6.1/7.1channel audio
*1
R
PR
L
Pro Logic
SUR. STANDARD
PLII Movie
PLII Music
PLII Game
PLIIx Movie
PLIIx Music
PLIIx Game
C
PL
R
PR
C
L
PL
R
PR
C
L
SL
SUR. STANDARD
DOLBY DIGITAL
PRO LOGIC
DTS
SBL SBR
2-channel
audio
(stereo)
SBL SBR
PL
R
L
SR
SL
L
SR
SL
SBL SBR
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
PL
R
PR
C
5.1/6.1/7.1channel audio
*3
L
SR
SL
SR
PR
C
SBL SBR
PL
R
R
R
SR
PR
C
SBL SBR
R
SR
SOUND FIELD PROGRAMS
Sound field program
SUR. STANDARD
Neural Sur.
2-channel
audio
(monaural)
PL
PR
C
L
SL
SUR. ENHANCED
DOLBY DIGITAL
PRO LOGIC
DTS
SBL SBR
PL
SL
SBL SBR
PL
L
SR
SL
SUR. ENHANCED
PLII Movie
PLIIx Movie
PL
L
SL
SBL SBR
5.1/6.1/7.1channel audio
*2
5.1/6.1/7.1channel audio
*3
R
SR
PR
C
L
SR
SL
SBL SBR
PL
R
L
SR
SL
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
SBL SBR
R
SR
Pro Logic
PR
C
SBL SBR
PL
R
Pro Logic
5.1/6.1/7.1channel audio
*1
PR
C
R
PR
C
L
2-channel
audio
(stereo)
PL
R
L
SR
SL
PR
C
SBL SBR
R
SR
When
“PRIORITY” is set
to “PRch”
L
SL
SOUND FIELD
PROGRAMS
PL
PR
C
SBL SBR
R
SR
When
“PRIORITY” is set
to “SBch”
SUR. ENHANCED
Neo:6 Cinema
PL
L
SL
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
SBL SBR
R
SR
When
“PRIORITY” is set
to “PRch”
PL
L
SL
PR
C
SBL SBR
R
SR
When
“PRIORITY” is set
to “SBch”
81
SOUND FIELD PROGRAMS
Sound field program
2-channel
audio
(monaural)
2-channel
audio
(stereo)
5.1/6.1/7.1channel audio
*1
5.1/6.1/7.1channel audio
*2
5.1/6.1/7.1channel audio
*3
STRAIGHT
PL
L
SL
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
SBL SBR
L
SR
SL
Monaural playback
Pure Direct
PL
L
SL
PR
C
SBL SBR
L
SR
SL
Monaural playback
82
PL
R
PR
C
SBL SBR
PL
R
R
SR
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
SBL SBR
PL
R
L
SR
SL
PR
C
SBL SBR
R
SR
SET MENU
SET MENU
You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Auto setup AUTO SETUP
Use this feature to automatically adjust speaker and system parameters (see page 32).
■ Manual setup MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Sound menu 1 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Parameter
Features
Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, and the
crossover frequency.
86
B)SPEAKER LEVEL
Adjusts the output level of each speaker.
89
C)SP DISTANCE
Adjusts the delay time of each speaker.
89
D)EQUALIZER
Adjusts the tonal quality of the center speaker.
90
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
91
F)DYNAMIC RANGE
Adjusts the dynamic range of Dolby Digital or DTS signals.
91
G)AUDIO SET
Adjusts the muting level, audio delay and tone bypass settings.
91
Input menu 2 INPUT MENU
Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.
Features
Page
A)I/O ASSIGNMENT
Assigns the input/output jacks of this unit according to the component to be used.
92
B)INPUT MODE
Selects the initial input mode of the source.
93
C)INPUT RENAME
Changes the name of the input source.
93
D)VOLUME TRIM
Adjusts the output volume of each jack.
94
83
ADVANCED
OPERATION
Parameter
SET MENU
Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
Parameter
Features
Page
A)DISPLAY SET
Adjusts the brightness of the display and converts video signals.
94
B)MEMORY GUARD
Locks sound field program parameters and other “SET MENU” settings.
95
C)PARAM. INI
Initializes the parameters of a group of sound field programs.
95
D)MULTI ZONE SET
Specifies the location of the speakers connected to the SPEAKERS B terminals.
96
E)XM RADIO SET
Displays the current reception level of the XM Connect-and-Play digital antenna accessory or
adjusts the XM Satellite Radio information display settings.
96
Note
The “XM RADIO SET” parameter is only applicable to the U.S.A. model.
■ Signal information SIGNAL INFO
Use this feature to check audio signal information (see page 46).
84
SET MENU
Using SET MENU
2
Press u / d to select “MANUAL SETUP”.
Use the remote control to access and adjust each
parameter.
TV
AV
CD
CD-R
STEREO
MD
SLEEP
MOVIE
3
4
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
ENTER
A-E/CAT.
A-E/CAT.
TUNER
DTV
VCR
DVR
10
[ ]/[]:Up/Down
[ENTER]:Enter
p
5
EXTD SUR. PURE DIRECT
p
MULTI CH IN
PHONO
V-AUX
ENTERTAIN
2
SELECT
SET MENU
;AUTOSETUP
.;MANUALSETUP
.;SIGNAL INFO
XM
CBL
DVD
MUSIC
1
STANDARD
PRESET/CH
ENT.
EFFECT
1
AMP
SOURCE
TV VOL
TV CH
PRESET/CH
LEVEL
TITLE
SET MENU
MENU
SRCH MODE
BAND
VOLUME
TV
ENTER
A-E/CAT.
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
1,7
2-6
3
REC
MOVIE
(U.S.A. model)
Press ENTER to enter “MANUAL SETUP”.
The “MANUAL SETUP” display appears in the
OSD.
y
;MANUAL SETUP
PRESET/CH
ENTER
You cannot change some “SET MENU” parameters when
“NIGHT:CINEMA” or “NIGHT:MUSIC” is selected as the night
listening mode (see page 40).
A-E/CAT.
[]/[]:Up/Down
[ENTER]:Enter
Press u / d repeatedly and then press
ENTER to select and enter the desired menu.
The following displays are examples where “SOUND
MENU” is selected.
PRESET/CH
1
Set the component selector switch to AMP
and then press SET MENU to enter “SET
MENU”.
The top “SET MENU” display appears in the OSD.
p
A-E/CAT.
4
Note
.1SOUNDMENU
2INPUTMENU
3OPTIONMENU
p
• You can change the “SET MENU” parameters while this unit is
reproducing sound.
• If you press one of the sound field program selector buttons
during the “SET MENU” operation, the “SET MENU”
operation is canceled.
• Repeat the following procedure to select and adjust each
parameter setting.
• Press RETURN to return to the previous menu level.
PRESET/CH
ENTER
A-E/CAT.
ENTER
A-E/CAT.
A-E/CAT.
A-E/CAT.
AMP
SET MENU
MENU
1 SOUND MENU 1/2
1 SOUND MENU 2/2
ADVANCED
OPERATION
SOURCE
SRCH MODE
TV
p
.E)LFE LEVEL
F)DYNAMIC RANGE
G)AUDIO SET
[]/[]:Up/Down
[ENTER]:Enter
p
SET MENU
p
p
.A)SPEAKERSET
B)SPEAKERLEVEL
C)SPDISTANCE
D)EQUALIZER
[]/[]:Up/Down
[ENTER]:Enter
.;AUTOSETUP
;MANUALSETUP
.;SIGNAL INFO
p
p
[ ]/[]:Up/Down
[ENTER]:Enter
85
SET MENU
5
Press u / d repeatedly and then press
ENTER to select and enter the desired
submenu.
The following display is an example where
“SPEAKER LEVEL” is selected.
PRESET/CH
Use this menu to manually adjust any speaker settings or
compensate for video signal processing delays when using
LCD monitors or projectors.
1 SOUND MENU 1/2
PRESET/CH
ENTER
p
A-E/CAT.
1 SOUND MENU 2/2
.E)LFE LEVEL
F)DYNAMIC RANGE
G)AUDIO SET
[]/[]:Up/Down
[ENTER]:Enter
p
A-E/CAT.
p
A-E/CAT.
.A)SPEAKERSET
B)SPEAKERLEVEL
C)SPDISTANCE
D)EQUALIZER
[]/[]:Up/Down
[ENTER]:Enter
p
ENTER
A-E/CAT.
1 SOUND MENU
■ Speaker settings A)SPEAKER SET
B)SPEAKER LEVEL
Use this feature to manually adjust any speaker settings.
-__________+
.FL;;;;;;;;;;
FR;;;;;;;;;;
C;;;;;;;;;;
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Front speakers FRONT SP
Choices: SMALL, LARGE
6
Press u / d to select the desired parameter
and then j / i to change the parameter
settings.
• Press i to increase the value.
• Press j to decrease the value.
PRESET/CH
7
SMALL>LARGE
PRESET/CH
ENTER
A-E/CAT.
FRONT SP
ENTER
A-E/CAT.
A-E/CAT.
A-E/CAT.
Press SET MENU to exit from “SET MENU”.
SET MENU
• Select “SMALL” (small) if you have small front
speakers that do not reproduce low-frequency signals
effectively. The low-frequency signals of the front left
and right channels are directed to the speakers selected
in “LFE/BASS OUT” (see page 88).
• Select “LARGE” (large) if you have large front
speakers that reproduce low-frequency signals
effectively. All the front left and right channel signals
are directed to the front left and right speakers.
MENU
SRCH MODE
Note
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, the stored data will be lost in case the power
cable is disconnected from the AC wall outlet or if the
power supply is cut off for more than one week.
86
If “LFE/BASS OUT” is set to “FRNT” (see page 88), the LFE
signals found in Dolby Digital or DTS sources, the low-frequency
signals of the front left and right channels, and the low-frequency
signals of other speakers set to “SML” (or “SMALL”) or to
“NONE” are all directed to the front left and right speakers
regardless of the “FRONT SP” setting.
SET MENU
Center speaker CENTER SP
Choices: NONE, SML, LRG
CENTER SP
Surround back speakers SUR. B L/R SP
Choices: NONE, SMLx1, SMLx2, LRGx1, LRGx2
SUR. B L/R SP
SMLx1 >SMLx2
NONE>SMLLRG
• Select “NONE” (none) if you did not connect a center
speaker. The low-frequency signals of the center
channel are directed to the speakers selected in “LFE/
BASS OUT”, and the rest of the center channel signals
are directed to the front left and right speakers.
• Select “SML” (small) if you have a small center
speaker that does not reproduce low-frequency signals
effectively. The low-frequency signals of the center
channel are directed to the speakers selected in “LFE/
BASS OUT”.
• Select “LRG” (large) if you have a large center speaker
that reproduces low-frequency signals effectively. All
the center channel signals are directed to the center
speaker.
Surround left/right speakers SUR. L/R SP
Choices: NONE, SML, LRG
SUR. L/R SP
NONE>SMLLRG
Presence speakers PRESENCE SP
Use this feature if you want to use the presence speakers
connected to this unit.
Choices: NONE, YES
PRESENCE SP
>NONEYES
• Select “NONE” (none) if you did not connect presence
speakers.
• Select “YES” (yes) if you connected presence speakers
and want to use them.
87
ADVANCED
OPERATION
• Select “NONE” (none) if you did not connect surround
speakers. This unit is set to the Virtual CINEMA DSP
mode (see page 50) and “SUR. B L/R SP” is
automatically set to “NONE”. The low-frequency
signals of the surround left and right channels are
directed to the speakers selected in “LFE/BASS OUT”.
• Select “SML” (small) if you have small surround left
and right speakers that do not reproduce low-frequency
signals effectively. The low-frequency signals of the
surround left and right channels are directed to the
speakers selected in “LFE/BASS OUT”.
• Select “LRG” (large) if you have large surround left
and right speakers that reproduce low-frequency
signals effectively. All the surround channel signals are
directed to the surround left and right speakers.
• Select “NONE” (none) if you did not connect surround
back speakers. The low-frequency signals of the
surround back channel are directed to the speakers
selected in “LFE/BASS OUT”, and the rest of the
surround back channel signals are directed to the
surround left and right speakers.
• Select “SMLx1” (small x 1) if you have a small
surround back speaker that does not reproduce lowfrequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in “LFE/BASS OUT”
and the rest of the signals are directed to the surround
back left speaker.
• Select “SMLx2” (small x 2) if you have two small
surround back speakers that do not reproduce lowfrequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in “LFE/BASS OUT”.
• Select “LRGx1” (large x 1) if you have a large
surround back speaker that reproduces low-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
speaker.
• Select “LRGx2” (large x 2) if you have two large
surround back speakers that reproduce low-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
and right speakers.
SET MENU
Bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
Choices: SWFR, FRNT, BOTH
LFE/BASS OUT
SWFRFRNT>BOTH
• Select “SWFR” (subwoofer) if you connected a
subwoofer. The LFE signals as well as the lowfrequency signals of other speakers set to “SML” (or
“SMALL”) or to “NONE” are directed to the
subwoofer.
• Select “FRNT” (front) if you did not connect a
subwoofer. The LFE signals, the low-frequency signals
of the front left and right channels, and the lowfrequency signals of other speakers set to “SML” (or
“SMALL”) or to “NONE” are all directed to the front
left and right speakers regardless of the “FRONT SP”
setting (see page 86).
• Select “BOTH” (both) if you connected a subwoofer.
The low-frequency signals of any source are output
from the subwoofer. The LFE signals as well as the
low-frequency signals of other speakers set to “SML”
(or “SMALL”) or to “NONE” are directed to the
subwoofer. The low-frequency signals of the front left
and right channels are directed to the front left and
right speakers and the subwoofer regardless of the
“FRONT SP” setting (see page 86).
Crossover CROSS OVER
Use this feature to select a crossover frequency of all the
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see pages 86 and 87). All frequencies
below the selected frequency will be sent to the subwoofer
or to the speakers set to “LRG” (or “LARGE”) in
“SPEAKER SET” (see pages 86 and 87).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
CROSS OVER
FREQ;;;80Hz
88
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
02ASUBWOOFER PHASE
>NORMALREVERSE
• Select “NORMAL” if you do not want to reverse the
phase of your subwoofer.
• Select “REVERSE” to reverse the phase of your
subwoofer.
Presence/Surround back channel priority
PRIORITY
Use this feature to prioritize either the presence or the
surround back speakers when playing sources that contain
surround back channel signals using the CINEMA DSP
sound field programs.
Choices: PRch, SBch
PRIORITY
PRch
>SBch
• Select “PRch” to use the presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from the
surround speakers.
• Select “SBch” to use the surround back speakers when
a surround back channel signals is detected in a
CINEMA DSP program. The presence channel signals
are output from the front speakers.
SET MENU
■ Speaker level B)SPEAKER LEVEL
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in “SPEAKER SET” (see page 86).
Control range: –10.0 to +10.0 dB
Control step: 0.5 dB
Initial setting: 0 dB
■ Speaker distance C)SP DISTANCE
Use this feature to manually adjust the distance of each
speaker and the delay applied to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
B)SPEAKER LEVEL
-__________+
.FL;;;;;;;;;;
FR;;;;;;;;;;
C;;;;;;;;;;
C)SP DISTANCE
• Select “FL” to adjust the balance of the front left
speaker.
• Select “FR” to adjust the balance of the front right
speaker.
• Select “C” to adjust the balance of the center speaker.
• Select “SL” to adjust the balance of the surround left
speaker.
• Select “SR” to adjust the balance of the surround right
speaker.
• Select “SBL” to adjust the balance of the surround
back left speaker.
• Select “SBR” to adjust the balance of the surround
back right speaker.
• Select “SWFR” to adjust the balance of the subwoofer.
• Select “PL” to adjust the balance of the presence left
speaker.
• Select “PR” to adjust the balance of the presence right
speaker.
Notes
Unit UNIT
Choices: meters (m), feet (ft)
Initial setting:
[U.S.A. and Canada models]: feet (ft)
[Other models]: meters (m)
• Select “meters” to adjust speaker distances in meters.
• Select “feet” to adjust speaker distances in feet.
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft)
• Select “FRONT L” to adjust the distance of the front
left speaker.
Initial setting: 3.00 m (10.0 ft)
• Select “FRONT R” to adjust the distance of the front
right speaker.
Initial setting: 3.00 m (10.0 ft)
• Select “CENTER” to adjust the distance of the center
speaker.
Initial setting: 3.00 m (10.0 ft)
• Select “SUR. L” to adjust the distance of the surround
left speaker.
Initial setting: 3.00 m (10.0 ft)
• Select “SUR. R” to adjust the distance of the surround
right speaker.
Initial setting: 3.00 m (10.0 ft)
• Select “SB L” to adjust the distance of the surround
back left speaker.
Initial setting: 2.10 m (7.0 ft)
• Select “SB R” to adjust the distance of the surround
back right speaker.
Initial setting: 2.10 m (7.0 ft)
• Select “SWFR” to adjust the distance of the subwoofer.
Initial setting: 3.00 m (10.0 ft)
• Select “PRNS L” to adjust the distance of the presence
left speaker.
Initial setting: 3.00 m (10.0 ft)
• Select “PRNS R” to adjust the distance of the presence
right speaker.
Initial setting: 3.00 m (10.0 ft)
89
ADVANCED
OPERATION
• “C”, “SL”, “SR”, “SBL”, “SBR”, “SWFR”, “PL” and “PR”
cannot be adjusted if “CENTER SP” (see page 87), “SUR. L/R
SP” (see page 87), “SUR. B L/R SP” (see page 87), “LFE/
BASS OUT” (see page 88) and “PRESENCE SP” (see page 87)
are set to “NONE” respectively.
• Instead of “SBL” and “SBR”, “SB” is displayed if “SUR. B L/R
SP” is set to either “SMLx1” or “LRGx1” (see page 87).
p
p
. UNIT;;;;;;;;feet
FRONTL;;;10.0ft
FRONTR;;;10.0ft
CENTER;;;;10.0ft
[]/[]:Up/Down
[<]/[>]:Adjust
SET MENU
Notes
• “CENTER”, “SUR. L”, “SUR. R”, “SB L”, “SB R”, “SWFR”,
“PRNS L” and “PRNS R” cannot be adjusted if “CENTER SP”
(see page 87), “SUR. L/R SP” (see page 87), “SUR. B L/R SP”
(see page 87), “LFE/BASS OUT” (see page 88) and
“PRESENCE SP” (see page 87) are set to “NONE”
respectively.
• Instead of “SB L” and “SB R”, “SUR. B” is displayed if “SUR.
B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 87).
■ Center graphic equalizer D)EQUALIZER
Use this feature to select the parametric equalizer or the
graphic equalizer.
Center graphic equalizer CENTER GEQ
When you select “CENTER GEQ” in “EQ TYPE
SELECT”, use this feature to adjust the built-in 5frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz)
graphic equalizer for the center channel so that the tonal
quality of the center speaker matches that of the front left
and right speakers. You can make adjustments while
listening to the currently selected source component or a
test tone.
Control range: –6.0 to +6.0 dB
Control step: 0.5 dB
Initial setting: 0.0 dB
D)EQUALIZER
Equalizer select EQ TYPE SELECT
Use this feature to select the type of equalizer.
Choices: AUTO PEQ, CENTER GEQ, EQ OFF
D)EQUALIZER
EQ TYPE SELECT
.
CENTER GEQ
p
p
/
: CT GEQ
[<]/[>]:Select
• Select “AUTO PEQ” to use the parametric equalizer
adjusted in “AUTO SETUP” (see page 32).
• Select “CENTER GEQ” to adjust the built-in 5frequency band graphic equalizer for the center speaker
so that the tonal quality of the center speaker matches
that of the front left and right speakers.
• Select “EQ OFF” to deactivate the equalizing feature.
Notes
• “AUTO PEQ” is automatically selected when you run “AUTO
SETUP” (see page 32).
• If you press u / d while “CENTER GEQ” is selected, the
OSD changes to the following screen.
90
0dB
0dB
0dB
0dB
0dB
p
p
.TEST>OFFON
-______+
100Hz ;;;;;;
300Hz ;;;;;;
1kHz ;;;;;;
3kHz ;;;;;;
10kHz ;;;;;;
[]/[]:Up/Down
[<]/[>]:Adjust
y
Press u / d to select a frequency band and j / i to adjust the
selected frequency band.
Test tone TEST
Use this feature to make adjustments of “CENTER GEQ”
while listening to a test tone.
Choices: OFF, ON
• Select “OFF” to stop test tones and output the currently
selected source component.
• Select “ON” to output test tones from the front left and
center speakers, and adjust the tonal quality of the
center speaker.
SET MENU
■ Low-frequency effect level E)LFE LEVEL
■ Audio settings G)AUDIO SET
Use this feature to adjust the overall audio settings of this
unit.
G)AUDIO SET
.MUTING TYPE;FULL
AUDIO DELAY;;0ms
TONE BYPASS;AUTO
p
[]/[]:Up/Down
[<]/[>]:Select
p
Use this feature to adjust the output level of the LFE (lowfrequency effect) channel according to the capacity of
your subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
Control range: –20 to 0 dB
Control step: 1 dB
E)LFE LEVEL
.SPEAKER;;;;;;0dB
HEADPHONE;;;;0dB
p
p
[]/[]:Up/Down
[<]/[>]:Adjust
Speaker SPEAKER
Adjusts the speaker LFE level.
Headphone HEADPHONE
Adjusts the headphone LFE level.
Note
Depending on the settings of “LFE/BASS OUT” (see page 88),
some signals may not be output at the SUBWOOFER OUTPUT
jack.
■ Dynamic range F)DYNAMIC RANGE
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when this unit is
decoding Dolby Digital and DTS signals.
Muting type MUTING TYPE
Use this feature to adjust how much the mute function
reduces the output volume (see page 40).
Choices: FULL, –20dB
• Select “FULL” to completely mute all the audio
output.
• Select “–20dB” to reduce the current volume by 20 dB.
Audio delay AUDIO DELAY
Use this feature to delay the sound output and synchronize
it with the video image. This may be necessary when
using certain LCD monitors or projectors.
Control range: 0 to 160 ms
Control step: 1 ms
Tone bypass TONE BYPASS
Use this feature to select whether audio output bypasses
tone control circuitry when “TREBLE” and “BASS” are
set to 0 dB (see page 39).
Choices: AUTO, OFF
• Select “AUTO” if you want signals to bypass tone
control circuitry to provide the purest signal possible.
• Select “OFF” if you do not want signals to bypass tone
control circuitry.
F)DYNAMIC RANGE
ADVANCED
OPERATION
.SP:MINSTD>MAX
HP:MINSTD>MAX
p
p
[]/[]:Up/Down
[<]/[>]:Select
Speaker SP
Adjusts the speaker compression.
Headphone HP
Adjusts the headphone compression.
Choices: MIN, STD, MAX
• Select “MIN” (minimum) if you regularly listen at low
volume levels.
• Select “STD” (standard) for general use.
• Select “MAX” (maximum) to preserve the greatest
amount of dynamic range.
91
SET MENU
2 INPUT MENU
Use this menu to reassign the input/output jacks, select the
input mode or rename the input source.
2 INPUTMENU
p
p
.A)I/OASSIGNMENT
B)INPUTMODE
C)INPUTRENAME
D)VOLUME TRIM
[]/[]:Up/Down
[ENTER]:Enter
For OPTICAL INPUT jacks 2, 3 and 4
OPTICAL IN (2)
OPTICAL IN (3)
OPTICAL IN (4)
Choices: (2) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
VCR, DVR
(3) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
VCR, DVR
(4) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
VCR, DVR
OPTICALIN
■ Input/output assignment
A)I/O ASSIGNMENT
Use this feature to assign the input/output jacks according
to the component to be used if the initial settings of this
unit do not correspond to your needs. Change the
following parameters to reassign the respective jacks and
effectively connect more components.
Once the input/output jacks are reassigned, you can select
the corresponding component by using the INPUT
selector on the front panel (or the input selector buttons on
the remote control).
For COMPONENT VIDEO jacks A, B and C
CMPNT-V INPUT [A]
CMPNT-V INPUT [B]
CMPNT-V INPUT [C]
Choices: [A] DVD, DTV/CBL, V-AUX, VCR, DVR
[B] DVD, DTV/CBL, V-AUX, VCR, DVR
[C] DVD, DTV/CBL, V-AUX, VCR, DVR
.(2);;;;;MD/CD-R
(MD/CD-R)
(3);;;;; DVD
(DVD )
(4);;;;;DTV/CBL
(DTV/CBL )
For COAXIAL INPUT jacks 5 and 6
COAXIAL IN (5)
COAXIAL IN (6)
Choices: (5) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
V-AUX, VCR, DVR
(6) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
V-AUX, VCR, DVR
COAXIALIN
.(5);;;;;
(
(6);;;;;
(
CD
CD
DVD
DVD
)
)
CMPNT-VINPUT
.[A];;;;;DVD
(DVD)
[B];;;;;DTV/CBL
(DTV/CBL)
[C];;;;; DVR
( DVR )
For OPTICAL OUTPUT jack 1 OPTICAL OUT (1)
Choices: PHONO, CD, MD/CD-R, DVD, DTV/CBL,
V-AUX, VCR, DVR
OPTICALOUT
.(1);;;;;MD/CD-R
(MD/CD-R )
92
Notes
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the DIGITAL INPUT
(COAXIAL) and DIGITAL INPUT (OPTICAL) jacks, priority
is given to the signals input at the DIGITAL INPUT
(COAXIAL) jack.
SET MENU
■ Input mode B)INPUT MODE
Use this feature to set this unit to reset “INPUT MODE”
back to “AUTO” (see page 41) regardless of the previous
setting or to recall the last input mode (“AUTO”, “DTS”
or “ANALOG”) used for that source whenever you turn on
this unit.
Choices: AUTO, LAST
2
Set the component selector switch to AMP
and then press j / i on the remote control to
place the “_” (underscore) under the space
or the character you want to edit.
PRESET/CH
AMP
SOURCE
B)INPUTMODE
ENTER
TV
A-E/CAT.
>AUTOLAST
A-E/CAT.
[<]/[>]:Select
[ENTER]:Return
3
• Select “AUTO” to reset “INPUT MODE” back to
“AUTO” (see page 41) regardless of the previous
setting whenever you turn on this unit. This unit
automatically selects input signals in the following
order:
(1) Digital signals
(2) Analog signals
• Select “LAST” to set this unit to automatically recall
the last input mode (“AUTO”, “DTS” or “ANALOG”)
used for that source whenever you turn on this unit.
Press u / d to select the character you want
to use and then press j / i to move to the
next space.
PRESET/CH
PRESET/CH
ENTER
ENTER
A-E/CAT.
A-E/CAT.
A-E/CAT.
A-E/CAT.
■ Input rename C)INPUT RENAME
Notes
Use this feature to change the name of the input source
that appears in the OSD and in the front panel display.
• You can use up to 8 characters for each input.
• Press d to change the character in the following order, or
press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)
C)INPUTRENAME
DVD->
DVD
________
4
Repeat steps 1 through 3 to rename each
input source.
5
Press SET MENU on the remote control to
exit from “INPUT RENAME”.
Press one of the input selector buttons on
the remote control to select the input source
you want to change the name of.
MD
CD
CD-R
ADVANCED
OPERATION
1
p
p
[<]/[>]:Position
[]/[]:Chara.
SET MENU
MENU
SRCH MODE
SLEEP
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
PHONO
93
SET MENU
Use this menu to adjust the optional system parameters.
3 OPTIONMENU 1/2
3 OPTIONMENU 2/2
.E)XM RADIO SET
p
.A)DISPLAYSET
B)MEMORYGUARD
C)PARAM.INI
D)MULTI ZONESET
[]/[]:Up/Down
[ENTER]:Enter
p
[]/[]:Up/Down
[ENTER]:Enter
p
D)VOLUME TRIM
DVD->0.0dB
3 OPTION MENU
p
■ Volume Trim D)VOLUME TRIM
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: PHONO, CD, MD/CD-R, TUNER, DVD,
DTV/CBL, V-AUX, VCR, DVR
Control range: –6.0 to +6.0 dB
Control step: 0.5 dB
Initial setting: 0.0 dB
■ Display settings A)DISPLAY SET
[<]/[>]:Adjust
[RETURN]:Exit
A)DISPLAYSET
p
p
.DIMMER;;;;;;;;;0
VIDEOCONV.;;;ON
OSD SHIFT;;;;;;0
GRAY BACK;;;AUTO
[]/[]:Up/Down
[<]/[>]:Select
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: – 4 to 0
Control step: 1
• Press j to make the front panel display dimmer.
• Press i to make the front panel display brighter.
Video conversion VIDEO CONV.
Use this feature to set whether to convert the video signals
input at the VIDEO and S VIDEO jacks.
Choices: ON, OFF
• Select “ON” to convert composite and S-video signals
interchangeably and up-convert composite and S-video
signals to component video signals.
• Select “OFF” not to convert any signals.
Notes
• The converted video signals are only output at the MONITOR
OUT jacks. When recording a video source, you must make the
same type of video connections between each component.
• When composite video or S-video signals from a VCR are
converted to component video signals, the picture quality may
suffer depending on your VCR.
• You must set “VIDEO CONV.” to “ON” to display the OSD.
• Unconventional signals input at the composite video or S-video
jacks cannot be converted or may be output abnormally. In such
cases, set “VIDEO CONV.” to “OFF”.
94
SET MENU
OSD shift OSD SHIFT
Use this feature to adjust the vertical position of the OSD.
Control range: –5 (upward) to +5 (downward)
Control step: 1
Initial setting: 0
• Press j to raise the position of the OSD.
• Press i to lower the position of the OSD.
Gray back GRAY BACK
Use this feature to display a gray background in the OSD
when there is no video signal being input.
Choices: AUTO, OFF
• Select “AUTO” to display a gray background in the
OSD when there is no video signal being input.
• Select “OFF” not to display any background in the
OSD.
■ Parameter initialization C)PARAM. INI
Use this feature to initialize the parameters of each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
factory settings.
Press the corresponding sound field program selector
buttons on the remote control to select the sound field
program that you want to initialize.
An asterisk (*) appears to the left of the sound field
program names that have been changed from their initial
factory settings.
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE THEATER, STANDARD
C)PARAM.INI
Notes
• Depending on the video signals being input or the system
setting of your video monitor (NTSC or PAL), the OSD may be
displayed abnormally. In such cases, set “GRAY BACK” to
“OFF”.
• Even when “GRAY BACK” is set to “OFF”, the OSD may not
be displayed correctly depending on the conditions of the
picture.
■ Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
STEREO
*MUSIC
ENTERTAINMENT
MOVIE THEATER
*STANDARD
Press DSP key
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any sound field program groups when
“MEMORY GUARD” is set to “ON” (see page 95).
B)MEMORYGUARD
>OFFON
[<]/[>]:Select
[ENTER]:Return
ADVANCED
OPERATION
• Select “OFF” to turn off the “MEMORY GUARD”
feature.
• Select “ON” to protect:
– DSP program parameters
– all “SET MENU” items
– all speaker levels
Note
When “MEMORY GUARD” is set to “ON”, you cannot select
and adjust any other “SET MENU” items.
95
SET MENU
■ Zone set D)MULTI ZONE SET
Use this feature to specify the location of speakers
connected to the SPEAKERS B terminals of this unit.
■ XM Radio setting E)XM RADIO SET
(U.S.A. model only)
Speaker B setting SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
E)XM RADIO SET
.XM DISPLAY;;;10S
XM ANTENNA;;NONE
SCROLL;;;;;;CONT
[<]/[>]:Select
[ENTER]:Return
D)MULTI ZONESET
.SPB;;;;;;;FRONT
[<]/[>]:Select
[ENTER]:Return
• Select “FRONT” to turn on or off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main zone.
• Select “ZONE B” if the speakers connected to the
SPEAKERS B terminals are set in another zone. If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers including the subwoofer in
the main zone are muted and this unit outputs sound at
the SPEAKERS B terminals only.
Notes
• If you connect headphones to the PHONES jack of this unit, the
sound is output from both headphones and the SPEAKERS B
terminals when “SP B” is set to “ZONE B”.
• If a DSP program is selected when “SP B” is set to “ZONE B”,
this unit automatically enters the Virtual CINEMA DSP mode
(see page 50).
XM Radio information display time XM DISPLAY
Use this feature to set the time to display the XM Satellite
Radio information in the OSD after pressing DISPLAY on
the front panel or on the remote control.
Choices: ON, 10S, 30S, OFF
• Select “ON” to display the XM Satellite Radio
information while this unit is tuned into a channel.
• Select “10S” to display the XM Satellite Radio
information for 10 seconds.
• Select “30S” to display the XM Satellite Radio
information for 30 seconds.
• Select “OFF” not to display the XM Satellite Radio
information.
XM Radio antenna XM ANTENNA
Use this feature to check the current reception level of the
XM Connect-and-Play digital antenna accessory
connected to the XM jack of this unit (see page 59). For
the best reception, orient the XM Connect-and-Play digital
antenna accessory so that a value of 60% or more is
displayed here.
Display status: NONE, 0 to 100%
Notes
• “NONE” is displayed if the XM Connect-and-Play digital antenna
accessory is not connected to this unit. In this case, check the
antenna connections (see page 59).
• The “XM ANTENNA” parameter cannot be adjusted by using
the remote control. Instead, you need to adjust the orientation of
the XM Connect-and-Play digital antenna accessory connected
to the XM jack of this unit for a better percentage of the
reception level.
XM Radio information display scroll SCROLL
Use this feature to set whether to display the XM Satellite
Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at
once (see page 68).
Choices: CONT, ONCE
• Select “CONT” to display the XM Satellite Radio
information in the front panel display in a continuous
manner.
• Select “ONCE” to display the XM Satellite Radio
information in the front panel display by 14
alphanumeric characters at once.
96
ADVANCED SETUP
ADVANCED SETUP
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Notes
• The settings you make are reflected next time you turn on this unit by pressing STANDBY/ON on the front panel (or POWER on the
remote control) (see page 31).
• Only STANDBY/ON, STRAIGHT (EFFECT) and the PROGRAM selector are effective while you are using the advanced setup
menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.
(U.S.A. model)
3
VOLUME
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
DISPLAY
CATEGORY
EDIT
NEXT
LEVEL
+
PROGRAM
PHONES
MAN'L/AUTO FM
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
VIDEO
L
AUDIO
R
OPTICAL
Rotate the PROGRAM selector on the front
panel to select the parameter you want to
adjust.
The name of the selected parameter appears in the
front panel display.
See page 98 for a complete list of available
parameters.
PROGRAM
1-2,5
1
2,4 3
Press STANDBY/ON on the front panel to set
this unit to the standby mode.
Currently selected
parameter
Currently selected
parameter setting
STANDBY
/ON
SP IMP.-8 MIN
2
4
Press STRAIGHT (EFFECT) on the front
panel repeatedly to change the selected
parameter setting.
ADVANCED
OPERATION
Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
STRAIGHT
While holding
down
EFFECT
STRAIGHT
STANDBY
/ON
EFFECT
5
Press STANDBY/ON on the front panel to
save the new setting and set this unit to the
standby mode.
STANDBY
/ON
y
The settings you made are reflected next time you turn on
this unit.
97
ADVANCED SETUP
■ Speaker impedance SP IMP.
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8ΩMIN, 6ΩMIN
• Select “8ΩMIN” to set the speaker impedance to 8 Ω .
• Select “6ΩMIN” to set the speaker impedance to 6 Ω .
SP IMP.
Speaker
Impedance level
If you use one set (A or B),
the impedance of each
speaker must be 8 Ω or
higher.
Front
If you use two sets (A and
B), the impedance of each
speaker must be 16 Ω or
higher.*
8ΩMIN
Center
Surround
The impedance of each
speaker must be 8 Ω or
higher.
■ Remote control AMP ID REMOTE AMP
Use this feature to set the AMP ID of this unit for remote
control recognition (see page 102).
Choices: ID1, ID2
• Select “ID1” when the remote control AMP ID library
code is set to “00001”.
• Select “ID2” when the remote control AMP ID library
code is set to “00002”.
Note
You need to set the corresponding remote control AMP library
code for the remote control (see page 102).
■ Remote control TUNER ID REMOTE TUN
Use this feature to set the TUNER ID of this unit for
remote control recognition (see page 102).
Choices: ID1, ID2
• Select “ID1” when the remote control TUNER ID
library code is set to “81916”.
• Select “ID2” when the remote control TUNER ID
library code is set to “81917”.
Surround back
Note
If you use one set (A or B),
the impedance of each
speaker must be 4 Ω or
higher.
Front
If you use two sets (A and
B), the impedance of each
speaker must be 8 Ω or
higher.
6ΩMIN
Center
Surround
The impedance of each
speaker must be 6 Ω or
higher.
You need to set the corresponding remote control TUNER library
code for the remote control (see page 102).
■ Remote control XM ID REMOTE XM
(U.S.A. model only)
Use this feature to set the XM ID of this unit for remote
control recognition (see page 103).
Choices: ID1, ID2
• Select “ID1” when the remote control XM ID library
code is set to “81918”.
• Select “ID2” when the remote control XM ID library
code is set to “81919”.
Surround back
Note
*
The Canada model cannot use two separate speaker systems
(A and B) simultaneously when “SP IMP.” is set to “8ΩMIN”.
■ Factory presets PRESET
Use this feature to reset all the parameters of this unit to
the initial factory settings (see page 106).
Choices: CANCEL, RESET
• Select “CANCEL” not to reset any parameters of this
unit.
• Select “RESET” to reset the parameters of this unit.
Notes
• This setting completely resets all the parameters of this unit
including the “SET MENU” parameters. However, the
advanced setup menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on
this unit.
98
You need to set the corresponding remote control XM library
code for the remote control (see page 102).
REMOTE CONTROL FEATURES
REMOTE CONTROL FEATURES
In addition to controlling this unit, the remote control can also operate other audiovisual components made by YAMAHA
and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code
for each input source (see page 101).
Controlling this unit, a TV, or other components
■ Controlling this unit
■ Controlling a TV
Set the component selector switch to AMP to control this
unit.
Set the component selector switch to TV to control your
TV. To control your TV, you must set the appropriate
remote control code for DTV/CBL or PHONO (see
page 101). When you set the remote control codes for both
DTV/CBL and PHONO, priority is given to the one set for
DTV/CBL.
CODE SET
TRANSMIT
POWER
POWER
TV
AV
STANDBY
POWER
MD
SLEEP
CD-R
CD
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
PHONO
CODE SET
AMP
*1
TRANSMIT
POWER
POWER
TV
AV
CD
CD-R
SOURCE
TV VOL
TV CH
STANDBY
POWER
MD
VOLUME
TV
SLEEP
XM
MULTI CH IN
CBL
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
*1
DVD
DTV
TUNER
V-AUX
DVR
VCR
TV VOL
TV CH
VOLUME
PHONO
AMP
EXTD SUR. PURE DIRECT
7
SPEAKERS
ENHANCER
9
0
NIGHT
10
8
STRAIGHT
PRESET/CH
TV
ENT.
EFFECT
LEVEL
SOURCE
SET MENU
TITLE
MENU
BAND
SRCH MODE
*2
TV MUTE
TV INPUT
MUTE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
ENTER
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
EXTD SUR. PURE DIRECT
10
AUDIO
ENT.
EFFECT
PRESET/CH
DISC SKIP
LEVEL
SET MENU
TITLE
MENU
BAND
SRCH MODE
*2
ENTER
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
REC
AUDIO
DISC SKIP
(U.S.A. model)
ADVANCED
OPERATION
Notes
*1
These buttons always control this unit regardless of the
component selector switch position.
*2 These buttons control this unit only when the component
selector switch is set to AMP.
(U.S.A. model)
Notes
*1
These buttons always control your TV regardless of the
component selector switch position.
Remote control
*2
Digital TV/Cable TV
TV POWER
Turns on or off the power.
TV VOL +/–
Increases or decreases the volume
level.
TV CH +/–
Changes the channel number.
TV MUTE
Mutes the audio output.
TV INPUT
Changes the input source.
These buttons control your TV only when the component
selector switch is set to TV. For details, see the “Digital TV/
Cable TV” column on page 100.
99
REMOTE CONTROL FEATURES
■ Controlling other components
Set the component selector switch to SOURCE to control
other components selected with the input selector buttons.
You must set the appropriate remote control code for each
input source (see page 101). The following table shows
the function of each control button used to control other
components assigned to each input selector button. Be
advised that some buttons may not correctly operate the
selected component.
U
1
CODE SET
POWER
TRANSMIT
POWER
TV
AV
CD
CD-R
STANDBY
POWER
MD
DTV
TUNER
V-AUX
DVR
VCR
PHONO
AMP
SOURCE
TV CH
U
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
EXTD SUR. PURE DIRECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
10
MULTI CH IN
CBL
DVD
TV VOL
2
SLEEP
XM
U
STEREO
VOLUME
EFFECT
3
4
5
TV
TV INPUT
MUTE
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
PRESET/CH
LEVEL
TITLE
SET MENU
MENU
SRCH MODE
BAND
7
8
ENTER
A-E/CAT.
A-E/CAT.
RETURN
DISPLAY
XM MEMORY
ON SCREEN
9
REC
6
TV MUTE
STEREO
ENT.
AUDIO
DISC SKIP
(U.S.A. model)
Remote
control
DVD
player/
recorder
1
2
AV POWER
Power *1
Power *1
Power *2
Power *1
Power *1
Power *1
1-9, 0, +10
Numeric
buttons
Numeric
buttons
Numeric
buttons
Numeric
buttons
Numeric
buttons
Numeric
buttons
3
4
TITLE
Title
5
6
7
8
9
VCR
Digital TV/
LD player
Cable TV
CD player
MD/CD
recorder
Tuner
iPod®
Preset stations
(1-8)
Band
PRESET/CH
Up
u
VCR channel
up
Up
Preset up (1-8) Up
PRESET/CH
Down
d
VCR channel
down
Down
Preset down
(1-8)
Down
A-E/CAT. j
Left
Left
Preset down
(A-E)
A-E/CAT. i
Right
Right
Preset up
(A-E)
ENTER
Enter
Enter
RETURN
Return
Return
REC/
DISC SKIP
Disc skip
(player)
Rec *3
Rec (recorder)
*3
Rec *2*3
p
Play
Play
Play *2
w
Search
backward
Search
backward
Search
backward *2
f
Search forward Search forward
Search forward
Search forward Search forward Search forward
*2
AUDIO
Audio
Audio
Audio *2
Sound
e
Pause
Pause
Pause *2
Pause
b
Skip backward
Skip backward Skip backward
Skip backward Skip backward Skip backward
*2
a
Skip forward
Skip forward
Skip forward
*2
Skip forward
Skip forward
Skip forward
Skip forward
s
Stop
Stop
Stop *2
Stop
Stop
Stop
Stop
ENT.
Title/Index
Enter
Enter
Chapter/Time
Index
Index
MENU
Menu
DISPLAY
Display
Display
Display
Display
Display
Display
Subsequent
menu
Disc skip
Rec *3
Play
Play
Play
Play
Search
backward
Search
backward
Search
backward
Search
backward *4
Pause
Pause
Menu
Search forward
*4
Pause
Skip backward
Previous menu
Display
Notes
*1
This button is operational only when the original remote control supplied with the component has a POWER button.
These buttons control your VCR or DVD recorder only when you set the appropriate remote control code for DVR (see page 101).
*3 When you use this button to record a source, press it twice repeatedly to prevent a malfunction.
*4 Press and hold to search backward or forward.
*2
100
REMOTE CONTROL FEATURES
Setting the remote control code
1
You can control your TV and other components by setting
the appropriate remote control code for each input source.
For a complete list of available remote control codes, refer
to “LIST OF REMOTE CONTROL CODES” at the end of
this manual.
Press one of the input selector buttons to
select the component you want to set up.
MD
CD
CD-R
SLEEP
XM
MULTI CH IN
CBL
DVD
DTV
TUNER
V-AUX
DVR
VCR
PHONO
The following table shows the default component in the
“Library (component category)” column and the remote
control code for each input source.
2
Remote Control Code Default Settings
Input
source
Library
(component
category)
Manufacturer
Default
code
CD
CD
YAMAHA
61907
MD/CD-R
MD
YAMAHA
70888
XM
TUNER
YAMAHA
81918
DVD
DVD
YAMAHA
40539
DTV/CBL
–
–
–
TUNER
TUNER
YAMAHA
81916
V-AUX
–
–
–
DVR
DVR
YAMAHA
51544
VCR
–
–
–
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
TRANSMIT
CODE SET
Flashes
3
Press the numeric buttons (0 to 9) to enter
the five-digit remote control code for the
component to be used.
The TRANSMIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is set.
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
TRANSMIT
PHONO
–
–
–
Note
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
10
Flashes
ENT.
EFFECT
y
Refer to “LIST OF REMOTE CONTROL CODES” at the
end of this manual.
Notes
• If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step
3, the setup process is canceled. If this happens, repeat the
setup procedure.
• If you enter the code number “9980”, the remote control
code previously set for the selected component is cleared.
101
ADVANCED
OPERATION
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is initially set as listed above.
In this case, try setting other YAMAHA remote control codes.
EXTD SUR. PURE DIRECT
REMOTE CONTROL FEATURES
■ Setting remote control TUNER ID library
codes
Setting library codes
You can operate multiple YAMAHA receivers or
amplifiers in the same room with the supplied remote
control simultaneously. Set the appropriate library code to
select and operate the desired component with the
supplied remote control.
Select one of the following codes to set the remote control
TUNER ID library code for the component you want to
use.
1
■ Setting remote control AMP ID library
codes
Press TUNER to select “TUNER” as the input
source.
TUNER
Select one of the following codes to set the remote control
AMP ID library code for the component you want to use.
1
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
TRANSMIT
CODE SET
TRANSMIT
CODE SET
Flashes
Flashes
2
Press the numeric buttons to enter the code
number “00001” or “00002”.
The TRANSMIT indicator on the remote control
flashes twice, and the AMP ID library code is
changed.
3
Press the numeric buttons to enter the code
number “81916” or “81917”.
The TRANSMIT indicator on the remote control
flashes twice, and the TUNER ID library code is
changed.
STEREO
MUSIC
ENTERTAIN
MOVIE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
1
2
3
4
STANDARD
SELECT
STANDARD
SELECT
5
6
7
8
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
9
0
EXTD SUR. PURE DIRECT
10
ENT.
TRANSMIT
Flashes
Function
00001
To operate this unit using
(initial setting) the default code.
00002
*1
*2
To operate this unit using
an alternative code.
10
ENT.
TRANSMIT
Flashes
EFFECT
EFFECT
AMP ID
library code
*1
EXTD SUR. PURE DIRECT
Remote
control AMP
ID *2
TUNER ID
library code
*1
ID1
(initial setting)
81916
To operate this unit using
(initial setting) the default code.
81917
ID2
The remote control setting
The setting of this unit (see page 98)
*1
*2
Function
To operate this unit using
an alternative code.
Remote
control
TUNER ID *2
ID1
(initial setting)
ID2
The remote control setting
The setting of this unit (see page 98)
Notes
Notes
• You need to set the corresponding remote control AMP ID
of this unit in the advanced setup (see page 98).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
• You need to set the corresponding remote control TUNER
ID of this unit in the advanced setup (see page 98).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
102
REMOTE CONTROL FEATURES
■ Setting remote control XM ID library
codes (U.S.A. model only)
Select one of the following codes to set the remote control
XM ID library code for the component you want to use.
1
Press XM to select “XM” as the input source.
Resetting all remote control codes
Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.
1
XM
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
TRANSMIT
CODE SET
Press the numeric buttons to enter the code
number “81918” or “81919”.
The TRANSMIT indicator on the remote control
flashes twice, and the XM ID library code is changed.
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
10
ENT.
Function
81919
*1
*2
To operate this unit using
an alternative code.
Press the numeric buttons to enter the code
number “9981”.
The TRANSMIT indicator on the remote control
flashes twice, and all the remote control codes
previously set are cleared and reset to the initial
factory settings.
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
10
ENT.
TRANSMIT
Flashes
EFFECT
Flashes
y
If you do not press any buttons within 30 seconds after step
2, the clearing process is canceled. In this case, repeat the
clearing procedure.
Remote
control XM
ID *2
ADVANCED
OPERATION
81918
To operate this unit using
(initial setting) the default code.
Flashes
TRANSMIT
EFFECT
XM ID
library code
*1
TRANSMIT
CODE SET
2
Flashes
3
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
ID1
(initial setting)
ID2
The remote control setting
The setting of this unit (see page 98)
Notes
• You need to set the corresponding remote control XM ID
of this unit in the advanced setup (see page 98).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
103
USING IPOD®
USING iPod®
Once you have stationed your iPod in a YAMAHA iPod universal dock (such as YDS-10 sold separately) connected to
the DOCK terminal of this unit (see page 24), you can enjoy playback of your iPod using the supplied remote control.
You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression
artifacts (such as the MP3 format) stored on your iPod (see page 43).
Notes
•
•
•
•
•
Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
Compatibility with your iPod may vary depending on the software version of your iPod.
The controls on your iPod are not operational when you operate your iPod using the OSD of this unit.
There are some characters that cannot be displayed in the front panel or in the OSD of this unit.
The name of the song being played appears in the front panel display up to 14 alphanumeric characters.
y
• For a complete list of the remote control functions used to control your iPod, see the “iPod” column in “Controlling other
components” on page 100.
• For a complete list of status messages that appear in the front panel display and in the OSD, see the “iPod” section in
“TROUBLESHOOTING” on page 111.
Setting the remote control code
You need to first assign the remote control code to V-AUX
on the remote control to control your iPod when “V-AUX”
is selected as the input source.
1
Press V-AUX on the remote control to select
“V-AUX” as the input source.
Press CODE SET on the remote control using
a ball point pen or a similar object.
The TRANSMIT indicator on the remote control
flashes twice.
TRANSMIT
CODE SET
Flashes
3
Press the numeric buttons to enter the code
number “81981”.
The TRANSMIT indicator on the remote control
flashes twice, and the remote control code for V-AUX
is set.
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
EXTD SUR. PURE DIRECT
10
ENT.
EFFECT
104
Once the remote control code is assigned to V-AUX on the
remote control, you can control your iPod when “V-AUX”
is selected as the input source. The operations of your iPod
can be done with or without the aid of the OSD of this
unit.
■ Controlling iPod without using the OSD
Once “V-AUX” is selected as the input source, you can
perform the basic operations of your iPod (see page 100)
using the supplied remote control without the aid of the
OSD of this unit.
V-AUX
2
Controlling iPod
TRANSMIT
Flashes
Note
Operations can be also done with the controls on your iPod.
y
For a complete list of the remote control buttons used to control
your iPod, see the “iPod” column in “Controlling other
components” on page 100.
USING iPod®
■ Controlling iPod using the OSD
Once “V-AUX” is selected as the input source, you can
perform the advanced operations of your iPod using the
supplied remote control with the aid of the OSD of this
unit. You can also browse the songs stored on your iPod in
the OSD. Further, you can change or adjust settings for
your iPod to suit your personal preferences.
Notes
• Operations cannot be done with the controls on your iPod.
• The YAMAHA logo appears in the display window of your
iPod.
• The “Setup” parameters can be changed or adjusted only in the
OSD.
• Press ENTER on the remote control to toggle between the
“Setup” parameter settings.
• You cannot browse the photos or video clips stored on your
iPod in the OSD. Instead, you must use the controls on your
iPod to select the desired photos or video clips. For details, see
“Controlling iPod without using the OSD” on page 104.
y
• Press MENU on the remote control to move back to the
previous menu level.
• For a complete list of the remote control buttons used to control
your iPod, see the “iPod” column in “Controlling other
components” on page 100.
• A character that cannot be recognized by this unit will be
replaced with an underscore “_”.
1
Press DISPLAY on the remote control.
The following display appears in the OSD.
iPod
DISPLAY
ON SCREEN
>
>
>
>
>
>
>
Press u / d on the remote control to select
the desired menu and then press ENTER to
enter the selected menu.
PRESET/CH
PRESET/CH
ENTER
A-E/CAT.
ENTER
A-E/CAT.
A-E/CAT.
Shuffle Shuffle
Use this feature to set this unit to play songs or albums in a
random order.
Choices: Off, Songs, Albums
• Select “Off ” to deactivate this feature.
• Select “Songs” to set this unit to play songs in a
random order.
• Select “Albums” to set this unit to play albums in a
random order.
Note
When “Shuffle” is set to a setting other than “Off ”, the
highlighted letter “S” appears in the top right corner while songs
or albums are being shuffled.
Repeat Repeat
Use this feature to set this unit to repeat one song or a
sequence of songs.
Choices: Off, One, All
• Select “Off ” to deactivate this feature.
• Select “One” to set this unit to repeat one song.
• Select “All” to set this unit to repeat a sequence of
songs.
A-E/CAT.
Choices: Playlists (playlists), Artists (artists),
Albums (albums), Songs (songs),
Genres (genres), Composers (composers),
Setup (setup)
When “Repeat” is set to a setting other than “Off ”, the
highlighted letter “R” appears in the top right corner while one
song or a sequence of songs are being repeated.
On-screen display time Onscreen
Use this feature to set the amount of time for which the
OSD is displayed after you perform a certain operation on
your iPod.
Choices: Always, 5s, 10s
• Select “Always” to display the OSD unceasingly while
you are operating your iPod.
• Select “5s” to turn off the OSD 5 seconds after you
perform a certain operation on your iPod.
• Select “10s” to turn off the OSD 10 seconds after you
perform a certain operation on your iPod.
Front panel display scroll FL Scroll
Use this feature to set whether to display the iPod
operation status in the front panel display in a continuous
manner or by 14 alphanumeric characters at once.
Choices: Cont, Once
• Select “Cont” to display the iPod operation status in
the front panel display in a continuous manner.
• Select “Once” to display the iPod operation status in
the front panel display by 14 alphanumeric characters
at once.
105
ADVANCED
OPERATION
2
Playlists > Songs
Artists > Albums > Songs
Albums > Songs
Songs
Genres > Artists > Albums > Songs
Composers > Albums > Songs
Setup > Shuffle, Repeat, Onscreen, FL Scroll
Note
Top
Playlists
Artists
Albums
Songs
Genres
Composers
Setup
•
•
•
•
•
•
•
RESETTING THE SYSTEM
RESETTING THE SYSTEM
Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
• This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup
menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press STANDBY/ON on the front panel (or STANDBY
on the remote control) to set this unit to the standby mode.
(U.S.A. model)
3
Rotate the PROGRAM selector on the front
panel to select “PRESET”.
VOLUME
PROGRAM
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
SEARCH MODE
OPTIMIZER
MIC
A/B/C/D/E
PRESET/TUNING/CH
MEMORY
TUNING MODE
DISPLAY
CATEGORY
EDIT
NEXT
LEVEL
+
PROGRAM
PHONES
MAN'L/AUTO FM
AUTO/MAN'L
INPUT
SPEAKERS
A
VIDEO AUX
B
STRAIGHT
TONE CONTROL
INPUT MODE
MULTI CH
INPUT
EFFECT
S VIDEO
SILENT CINEMA
1-2,5
1
VIDEO
L
AUDIO
R
OPTICAL
2,4 3
PRESET-CANCEL
Press STANDBY/ON on the front panel to set
this unit to the standby mode.
4
STANDBY
/ON
Press STRAIGHT (EFFECT) on the front
panel repeatedly to select “RESET”.
STRAIGHT
2
Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
EFFECT
PRESET-RESET
While holding
down
STRAIGHT
y
STANDBY
/ON
Select “CANCEL” to cancel the initialization procedure
without making any changes.
EFFECT
5
Press STANDBY/ON on the front panel to
confirm your selection and set this unit to the
standby mode.
STANDBY
/ON
106
TROUBLESHOOTING
TROUBLESHOOTING
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, set this unit to the standby mode, disconnect the power cable, and contact the
nearest authorized YAMAHA dealer or service center.
■ General
Problem
This unit fails to turn
on or enters the
standby mode soon
after the power is
turned on.
No sound
Remedy
See
page
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable firmly.
—
The speaker impedance setting is
incorrect.
Set the speaker impedance to match your speakers.
30
The protection circuitry has been
activated.
Make sure that all speaker wire connections on this
unit and on all speakers are secure and that the wire
for each connection does not touch anything other
than its respective connection.
13
This unit has been exposed to a strong
external electric shock (such as lightning
or strong static electricity).
Set this unit to the standby mode, disconnect the
power cable, plug it back in after 30 seconds and then
use it normally.
—
Incorrect input or output cable
connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
19-27
“INPUT MODE” is set to “DTS” or
“ANALOG”.
Set “INPUT MODE” to “AUTO”.
No appropriate input source has been
selected.
Select an appropriate input source with the INPUT
selector on the front panel (or the input selector
buttons on the remote control) and MULTI CH
INPUT on the front panel (or MULTI CH IN on the
remote control).
Speaker connections are not secure.
Secure the connections.
13
The front speakers to be used have not
been selected properly.
Select the front speakers with SPEAKERS A and/or
B on the front panel or SPEAKERS on the remote
control.
38
The volume is turned down.
Turn up the volume.
—
The sound is muted.
Press MUTE or VOLUME +/– on the remote control
to resume audio output and then adjust the volume.
40
“INPUT MODE” is set to “ANALOG”
while playing a source encoded in DTS.
Set “INPUT MODE” to “AUTO” or “DTS”.
41
Signals this unit cannot reproduce are
being input from a source component,
such as a CD-ROM.
Play a source whose signals can be reproduced by this
unit.
—
The output and input for the picture are
connected to different types of video
jacks.
Set “VIDEO CONV.” to “ON”.
94
41
38, 44
107
ADDITIONAL
INFORMATION
No picture
Cause
TROUBLESHOOTING
Problem
The sound suddenly
goes off.
Cause
See
page
Check that the speaker impedance setting is correct.
30, 98
Check that the speaker wires are not touching each
other and then turn this unit back on.
—
The sleep timer has set this unit to the
standby mode.
Turn on this unit, and play the source again.
—
The sound is muted.
Press MUTE or VOLUME +/– on the remote control
to resume audio output.
40
Sound is heard from
the speaker on one
side only.
Incorrect cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
13
Incorrect settings in “SPEAKER
LEVEL”.
Adjust the “SPEAKER LEVEL” settings.
89
Only the center
speaker outputs
substantial sound.
When playing a monaural source with a
CINEMA DSP program, the source signal
is directed to the center channel, and the
front and surround speakers output effect
sounds.
No sound is heard
from the center
speaker.
“CENTER SP” in “SET MENU” is set to
“NONE”.
Set “CENTER SP” to “SML” or “LRG”.
87
One of the HiFi DSP programs (except for
“7ch Stereo”) has been selected.
Try another sound field program.
70
No sound is heard
from the surround
speakers.
“SUR. L/R SP” in “SET MENU” is set to
“NONE”.
Set “SUR. L/R SP” to “SML” or “LRG”.
87
This unit is in the “STRAIGHT” mode
and a monaural source is being played
back.
Press STRAIGHT (EFFECT) on the front panel so
that “STRAIGHT” disappears from the front panel
display.
45
No sound is heard
from the surround
back speakers.
“SUR. L/R SP” in “SET MENU” is set to
“NONE” and “SUR. B L/R SP” is
automatically set to “NONE”.
Set “SUR. L/R SP” and “SUR. B L/R SP” to a setting
other than “NONE”.
87
“SUR. B L/R SP” in “SET MENU” is set
to “NONE”.
Set “SUR. B L/R SP” to a setting other than
“NONE”.
87
“LFE/BASS OUT” in “SET MENU” is
set to “FRNT” when a Dolby Digital or
DTS signal is being played.
Set “LFE/BASS OUT” to “SWFR” or “BOTH”.
88
“LFE/BASS OUT” in “SET MENU” is
set to “SWFR” or “FRNT” when a 2channel source is being played.
Set “LFE/BASS OUT” to “BOTH”.
88
No sound is heard
from the subwoofer.
The protection circuitry has been activated
because of a short circuit, etc.
Remedy
The source does not contain lowfrequency signals.
108
TROUBLESHOOTING
Problem
Cause
Remedy
See
page
Dolby Digital or DTS
sources cannot be
played. (Dolby Digital
or DTS indicator in
the front panel
display does not light
up.)
The connected component is not set to
output Dolby Digital or DTS digital
signals.
Make an appropriate setting following the operating
instructions for your component.
—
“INPUT MODE” is set to “ANALOG”.
Set “INPUT MODE” to “AUTO” or “DTS”.
41
A humming sound is
heard.
Incorrect cable connections.
Connect the audio cables firmly. If the problem
persists, the cables may be defective.
—
The volume level is
low while a record is
being played.
The record is being played on a turntable
with an MC cartridge.
Connect your turntable to this unit through an MChead amplifier.
23
The volume level
cannot be increased,
or the sound is
distorted.
The component connected to the AUDIO
OUT (REC) jacks of this unit is turned
off.
Turn on the power of the component.
—
The sound effect
cannot be recorded.
It is not possible to record the sound effect
with a recording component.
A source cannot be
recorded by a digital
recording component
connected to the
DIGITAL OUTPUT
jack.
The source component is not connected to
the DIGITAL INPUT jacks of this unit.
A source cannot be
recorded by an
analog component
connected to the
AUDIO OUT (REC)
jacks.
The source component is not connected to
the analog AUDIO IN jacks of this unit.
Connect the source component to the analog AUDIO
IN jacks.
23
The sound field
parameters and some
other settings of this
unit cannot be
changed.
“MEMORY GUARD” in “SET MENU”
is set to “ON”.
Set “MEMORY GUARD” to “OFF”.
95
This unit does not
operate properly.
The internal microcomputer has been
frozen by an external electric shock (such
as lightning or excessive static electricity)
or by a power supply with low voltage.
Disconnect the power cable from the AC wall outlet
and then plug it in again after about 30 seconds.
—
“CHECK SP WIRES”
appears in the front
panel display.
Speaker cables are short-circuited.
Make sure all speaker cables are connected correctly.
13
There is noise
interference from
digital or radio
frequency equipment.
This unit is too close to the digital or highfrequency equipment.
Move this unit further away from such equipment.
—
The picture is
disturbed.
The video source uses scrambled or
encoded signals to prevent dubbing.
This unit suddenly
enters the standby
mode.
The internal temperature becomes too
high and the overheat protection circuitry
has been activated.
Wait about 1 hour for this unit to cool down and then
turn it back on.
—
Connect the source component to the DIGITAL
INPUT jacks.
20, 23
Some components cannot record the
Dolby Digital or DTS sources.
ADDITIONAL
INFORMATION
109
TROUBLESHOOTING
■ Tuner
Problem
Cause
FM stereo reception is
noisy.
FM
AM
■
Remedy
The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.
See
page
Check the antenna connections.
28
Try using a high-quality directional FM
antenna.
—
Use the manual tuning method.
53
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multi-path interference.
Adjust the antenna position to eliminate
multi-path interference.
—
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is too weak.
Use a high-quality directional FM antenna.
—
Use the manual tuning method.
53
Previously preset
stations can no longer
be tuned into.
This unit has been disconnected for a
long period.
Set preset stations
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak or the antenna
connections are loose.
Tighten the AM loop antenna connections
and orient it for the best reception.
—
Use the manual tuning method.
53
There are continuous
crackling and hissing
noises.
Noises result from lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.
Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
—
There are buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV set.
—
54, 55
XM Satellite Radio (U.S.A. model only)
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
Status message
Cause
Remedy
See
page
CHECK ANTENNA
The XM Connect-and-Play digital antenna
accessory is not connected to the XM jack
of this unit or does not work properly.
Check the XM Connect-and-Play digital antenna
accessory connections and orient it for the best
reception level.
59
UPDATING
The XM user encryption code is being
updated.
Wait until the encryption code is updated.
—
NO SIGNAL
The signal is too weak.
Check the XM Connect-and-Play digital antenna
accessory connections and orient it for the best
reception level.
59
LOADING
It takes longer than four seconds for audio
or text data to be decoded.
Wait until the decoding process has finished.
—
OFF AIR
The XM Satellite Radio channel you
selected is not currently broadcasting any
signals.
Check the channel number again or select another
XM Satellite Radio channel.
—
<XM> - - -
The Channel Station ID (SID) is no longer
available.
- - -
No artist name or song title is available.
Select another channel category by pressing
CATEGORY on the front panel (or A-E/CAT. j / i on
the remote control) repeatedly.
64
/
- - -
<CAT> - - -
110
No channels are available for the selected
category.
TROUBLESHOOTING
■ Remote control
Problem
The remote control
does not work nor
function properly.
Cause
Remedy
See
page
Wrong distance or angle.
The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel.
8
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
—
The batteries are weak.
Replace all batteries.
3
The remote control code is not correctly
set.
Set the remote control code correctly using “LIST OF
REMOTE CONTROL CODES” at the end of this
manual.
101
Try setting another code for the same manufacturer
using “LIST OF REMOTE CONTROL CODES” at
the end of this manual.
101
The library code of the remote control and
the remote control ID of this unit do not
match.
Match the remote control ID of this unit with the
corresponding remote control library code.
98, 102
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
■ iPod
Note
In case of a transmission error without a status message appearing in the front panel and in the OSD, check the connection to your iPod
(see page 24).
Status message
Loading...
Cause
Remedy
See
page
This unit is in the middle of recognizing
the connection with your iPod.
This unit is in the middle of acquiring
song lists from your iPod.
Connect error
There is a problem with the signal path
from your iPod to this unit.
Set this unit to the standby mode and reconnect the
YAMAHA iPod universal dock to the DOCK
terminal of this unit.
24
Try resetting your iPod.
—
Only iPod (Click and Wheel), iPod nano, and iPod
mini are supported.
—
The iPod being used is not supported by
this unit.
iPod connected
Your iPod is properly stationed in a
YAMAHA iPod universal dock (such as
YDS-10 sold separately) connected to the
DOCK terminal of this unit, and the
connection between your iPod and this
unit is complete.
Disconnected
Your iPod was removed from a YAMAHA
iPod universal dock (such as YDS-10 sold
separately) connected to the DOCK
terminal of this unit.
Station your iPod back in a YAMAHA iPod universal
dock (such as YDS-10 sold separately) connected to
the DOCK terminal of this unit.
24
Unable to play
This unit cannot play back the songs
currently stored on your iPod.
Check that the songs currently stored on your iPod
are playable.
—
Store some other playable music files on your iPod.
—
111
ADDITIONAL
INFORMATION
Unknown type
TROUBLESHOOTING
■ AUTO SETUP
Before AUTO SETUP
Error message
Connect MIC!
Unplug HP!
Cause
Optimizer microphone is not connected.
Headphones are connected.
Remedy
See
page
Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel.
32
Unplug the headphones.
—
During AUTO SETUP
Error message
E-1:NO FRONT SP
Cause
Remedy
See
page
Front L/R channel signals are not detected.
Select the front speakers with SPEAKERS
A or B.
38
Check the front L/R speaker connections.
13
E-2:NO SURR.SP
A surround channel signal is not detected.
Check the surround speaker connections.
13
E-3:NO PRNS SP
A presence channel signal is not detected.
Check the presence speaker connections.
13
E-4:SBR->SBL
Only right surround back channel signal is
detected.
Connect the surround back speaker to the
LEFT SURROUND BACK SPEAKERS
terminal if you only have one surround
back speaker.
13
Background noise is too loud.
Try running “AUTO SETUP” in a quiet
environment.
—
Turn off noisy electric equipment like air
conditioners or move them away from the
optimizer microphone.
—
E-5:NOISY
E-6:CHECK SUR.
Surround back speakers are connected,
though surround L/R speakers are not.
Connect surround speakers when you use
surround back speakers.
13
E-7:NO MIC
The optimizer microphone was unplugged
during the “AUTO SETUP” procedure.
Connect the supplied optimizer microphone
to OPTIMIZER MIC jack on the front
panel.
32
The optimizer microphone does not detect
test tones.
Check the microphone setting.
32
Check the speaker connections and
placement.
13
E-8:NO SIGNAL
E-9:USER CANCEL
The “AUTO SETUP” procedure was
cancelled due to user activity.
Run “AUTO SETUP” again.
E-10:INTERNAL ERROR
An internal error occurred.
Run “AUTO SETUP” again.
112
32
32
TROUBLESHOOTING
After AUTO SETUP
Warning message
W-1:OUT OF PHASE
Cause
Remedy
See
page
Speaker polarity is not correct. This
message may appear depending on the
speakers even when the speakers are
connected correctly.
Check the speaker connections for proper
polarity (+ or –).
W-2:OVER 24m (80ft)
The distance between the speaker and the
listening position is over 24 m (80 ft).
Bring the speaker closer to the listening
position.
—
W-3:LEVEL ERROR
The difference of volume level among
speakers is excessive. (No level correction
is made.)
Readjust the speaker installation so that all
speakers are set in locations with similar
conditions.
—
Check the speaker connections.
13
Use speakers of similar quality.
—
Adjust the output volume of the subwoofer.
33
13
Notes
•
•
•
•
If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “AUTO SETUP” again.
If warning “W-1” appears, corrections are made, but they may not be optimal.
If warning “W-2” or “W-3” appears, no corrections are made.
If error “E-10” occurs repeatedly, please contact a qualified YAMAHA service center.
ADDITIONAL
INFORMATION
113
GLOSSARY
GLOSSARY
Audio information
■ Dolby Digital
Dolby Digital is a digital surround sound system that gives
you completely independent multi-channel audio. With 3
front channels (front L/R and center), and 2 surround
stereo channels, Dolby Digital provides 5 full-range audio
channels. With an additional channel especially for bass
effects, called LFE (Low Frequency Effect), the system
has a total of 5.1-channels (LFE is counted as 0.1
channel). By using 2-channel stereo for the surround
speakers, more accurate moving sound effects and
surround sound environment are possible than with Dolby
Surround. The wide dynamic range from maximum to
minimum volume reproduced by the 5 full-range channels
and the precise sound orientation generated using digital
sound processing provide listeners with unprecedented
excitement and realism. With this unit, any sound
environment from monaural up to a 5.1-channel
configuration can be freely selected for your enjoyment.
■ Dolby Digital EX
Dolby Digital EX creates 6 full-bandwidth output
channels from 5.1-channel sources. This is done using a
matrix decoder that derives 3 surround channels from the
2 in the original recording. For the best results, Dolby
Digital EX should be used with movie sound tracks
recorded with Dolby Digital Surround EX. With this
additional channel, you can experience more dynamic and
realistic moving sound especially with scenes with “flyover” and “fly-around” effects.
■ Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to
decode vast numbers of existing Dolby Surround sources.
This new technology enables a discrete 5-channel
playback with 2 front left and right channels, 1 center
channel, and 2 surround left and right channels instead of
only 1 surround channel for conventional Pro Logic
technology. There are three modes available: “Music
mode” for music sources, “Movie mode” for movie
sources and “Game mode” for game sources.
■ Dolby Pro Logic IIx
Dolby Pro Logic IIx is a new technology enabling discrete
multi-channel playback from 2-channel or multi-channel
sources. There are three modes available: “Music mode”
for music sources, “Movie mode” for movie sources (for
2-channel sources only) and “Game mode” for game
sources.
114
■ Dolby Surround
Dolby Surround uses a 4-channel analog recording system
to reproduce realistic and dynamic sound effects: 2 front
left and right channels (stereo), a center channel for dialog
(monaural), and a surround channel for special sound
effects (monaural). The surround channel reproduces
sound within a narrow frequency range. Dolby Surround is
widely used with nearly all video tapes and laser discs,
and in many TV and cable broadcasts as well. The Dolby
Pro Logic decoder built into this unit employs a digital
signal processing system that automatically stabilizes the
volume on each channel to enhance moving sound effects
and directionality.
■ DTS 96/24
DTS 96/24 offers an unprecedented level of audio quality
for multi-channel sound on DVD video, and is fully
backward-compatible with all DTS decoders. “96” refers
to a 96 kHz sampling rate compared to the typical 48 kHz
sampling rate. “24” refers to 24-bit word length. DTS 96/
24 offers sound quality transparent to the original 96/24
master, and 96/24 5.1-channel sound with full-quality fullmotion video for music programs and motion picture
soundtracks on DVD video.
■ DTS (Digital Theater Systems)
Digital Surround
DTS digital surround was developed to replace the analog
soundtracks of movies with a 6.1-channel digital sound
track, and is now rapidly gaining popularity in movie
theaters around the world. Digital Theater Systems Inc.
has developed a home theater system so that you can enjoy
the depth of sound and natural spatial representation of
DTS digital surround in your home. This system produces
practically distortion-free 6.1-channel sound (technically,
front left and right, center, surround left and right, and
LFE 0.1 (subwoofer) channels for a total of 5.1 channels).
This unit incorporates a DTS-ES decoder that enables 6.1channel reproduction by adding the surround back channel
to the existing 5.1-channel format.
■ ITU-R
ITU-R is the radio communication sector of the ITU
(International Telecommunication Union). ITU-R
recommends a standard speaker placement which is used
in many critical listening rooms, especially for mastering
purposes.
GLOSSARY
■ LFE 0.1 channel
This channel reproduces low-frequency signals. The
frequency range of this channel is from 20 Hz to 120 Hz.
This channel is counted as 0.1 because it only enforces a
low-frequency range compared to the full-range
reproduced by the other 5/6 channels in Dolby Digital or
DTS 5.1/6.1-channel systems.
■ Neo:6
Neo:6 decodes the conventional 2-channel sources for 6channel playback by the specific decoder. It enables
playback with the full-range channels with higher
separation just like digital discrete signal playback. There
are two modes available: “Music mode” for music sources
and “Cinema mode” for movie sources.
■ Neural Surround
Neural Surround™ represents the latest advancement in
surround technology and has been adopted by XM
Satellite Radio for digital radio broadcast of surround
recordings and live events in surround sound. Neural
Surround™ employs psychoacoustic frequency domain
processing which allows delivery of a more detailed sound
stage with superior channel separation and localization of
audio elements. System playback is scalable from 5.1 to
7.1 multi-channel surround playback.
■ PCM (Linear PCM)
Linear PCM is a signal format under which an analog
audio signal is digitized, recorded and transmitted without
using any compression. This is used as a method of
recording CDs and DVD audio. The PCM system uses a
technique for sampling the size of the analog signal per
very small unit of time. Standing for “Pulse Code
Modulation”, the analog signal is encoded as pulses and
then modulated for recording.
Video information
■ Component video signal
With the component video signal system, the video signal
is separated into the Y signal for the luminance and the PB
and PR signals for the chrominance. Color can be
reproduced more faithfully with this system because each
of these signals is independent. The component signal is
also called the “color difference signal” because the
luminance signal is subtracted from the color signal. A
monitor with component input jacks is required in order to
output component signals.
■ Composite video signal
With the composite video signal system, the video signal
is composed of three basic elements of a video picture:
color, brightness and synchronization data. A composite
video jack on a video component transmits these three
elements combined.
■ S-video signal
With the S-video signal system, the video signal normally
transmitted using a pin cable is separated and transmitted
as the Y signal for the luminance and the C signal for the
chrominance through the S-video cable. Using the
S VIDEO jack eliminates video signal transmission loss
and allows recording and playback of even more beautiful
images.
■ Sampling frequency and number of
quantized bits
ADDITIONAL
INFORMATION
When digitizing an analog audio signal, the number of
times the signal is sampled per second is called the
sampling frequency, while the degree of fineness when
converting the sound level into a numeric value is called
the number of quantized bits. The range of rates that can
be played back is determined based on the sampling rate,
while the dynamic range representing the sound level
difference is determined by the number of quantized bits.
In principle, the higher the sampling frequency, the wider
the range of frequencies that can be played back, and the
higher the number of quantized bits, the more finely the
sound level can be reproduced.
115
GLOSSARY
Sound field program information
■ CINEMA DSP
Since the Dolby Surround and DTS systems were
originally designed for use in movie theaters, their effect
is best felt in a theater having many speakers designed for
acoustic effects. Since home conditions, such as room
size, wall material, number of speakers, and so on, can
differ so widely, it is inevitable that there are differences in
the sound heard. Based on a wealth of actually measured
data, YAMAHA CINEMA DSP uses YAMAHA original
sound field technology to combine Dolby Pro Logic,
Dolby Digital and DTS systems to provide the audiovisual
experience of movie theater in the listening room of your
own home.
■ SILENT CINEMA
YAMAHA has developed a natural, realistic sound effect
DSP algorithm for headphones. Parameters for
headphones have been set for each sound field so that
accurate representations of all the sound field programs
can be enjoyed on headphones.
■ Virtual CINEMA DSP
YAMAHA has developed a Virtual CINEMA DSP
algorithm that allows you to enjoy DSP sound field
surround effects even without any surround speakers by
using virtual surround speakers. It is even possible to
enjoy Virtual CINEMA DSP using a minimal two-speaker
system that does not include a center speaker.
116
SPECIFICATIONS
SPECIFICATIONS
AUDIO SECTION
VIDEO SECTION
• Minimum RMS Output Power for Front, Center, Surround,
Surround back
1 kHz, 0.7% THD, 8 Ω ...................................................... 115 W
• Video Signal Type ........................................................ PAL/NTSC
• Dynamic Power (IHF)
8/6/4/2 Ω ....................................................... 135/170/200/245 W
• Damping Factor (IHF)
20 Hz to 20 kHz, 8 Ω .................................................120 or more
• Frequency Response
CD terminal to Front L/R .................... 10 Hz to 100 kHz, –3 dB
• Total Harmonic Distortion
PHONO to REC OUT (20 Hz to 20 kHz, 1 V) ..... 0.02% or less
CD, etc. to Front L/R
(20 Hz to 20 kHz, 50 W, 8 Ω) ............................ 0.06% or less
• Signal to Noise Ratio (IHF-A Network)
Phono (5 mV) to REC OUT
[Australia model] ................................................... 81 dB or more
[U.S.A. and Canada models] ................................. 86 dB or more
CD (250 mV) to Front L/R, Effect Off ................ 100 dB or more
• Residual Noise (IHF-A Network)
Front L/R .............................................................. 150 µV or less
• Channel Separation (1 kHz/10 kHz)
PHONO (shorted) to Front L/R ................. 60 dB/55 dB or more
CD (5.1 kΩ terminated) to Front L/R ........ 60 dB/45 dB or more
• Signal to Noise Ratio .............................................. 50 dB or more
• Frequency Response (MONITOR OUT)
Component ............................................. 5 Hz to 60 MHz, –3 dB
FM SECTION
• Tuning Range
[U.S.A. and Canada models] ......................... 87.5 to 107.9 MHz
[Australia model] ...................................... 87.50 to 108.00 MHz
• Usable Sensitivity (IHF)...................................... 1.0 µV (11.2 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo ............................................................ 76 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo ............................................................... 0.2%/0.3%
• Stereo Separation (1 kHz) ..................................................... 42 dB
• Frequency Response ........................ 20 Hz to 15 kHz, +0.5, –2 dB
AM SECTION
• Tuning Range
[U.S.A. and Canada models] ............................. 530 to 1710 kHz
[Australia model] .............................................. 531 to 1611 kHz
• Usable Sensitivity ............................................................ 300 µV/m
• Tone Control (Front L/R)
BASS Boost/Cut ..................................................... ±6 dB/50 Hz
BASS Turnover Frequency ............................................... 350 Hz
TREBLE Boost/Cut .............................................. ±6 dB/20 kHz
TREBLE Turnover Frequency ......................................... 3.5 kHz
GENERAL
• Phones Output ......................................................... 150 mV/100 Ω
• Power Consumption
[U.S.A. and Canada models] ................................ 400 W/500 VA
[Australia model] .............................................................. 440 W
• Input Sensitivity/Input Impedance
PHONO ................................................................. 3.5 mV/47 kΩ
CD, etc. ................................................................ 200 mV/47 kΩ
MULTI CH INPUT .............................................. 200 mV/47 kΩ
• Output Level/Output Impedance
REC OUT ........................................................... 200 mV/1.2 kΩ
PRE OUT .................................................................... 2 V/1.2 kΩ
SUBWOOFER ........................................................... 4 V/1.7 kΩ
• Power Supply
[U.S.A. and Canada models] ............................ AC 120 V, 60 Hz
[Australia model] ............................................. AC 240 V, 50 Hz
• Standby Power Consumption ..................................... 0.1 W or less
• AC Outlets
[Australia model] .............................. 1 (Total 100 W maximum)
[U.S.A. and Canada models]............... 2 (Total 100 W maximum)
• Dimensions (W x H x D) ................................. 435 x 171 x 419 mm
(17.1 x 6.7 x 16.5 in)
• Weight .................................................................. 11.8 kg (26.0 lbs)
ADDITIONAL
INFORMATION
117
LIST OF REMOTE CONTROL CODES
CABLE TV RECEIVER
ABC
10003, 10008,
10014, 10017,
10033
AMERICAST 10899
BELL & HOWELL
10014
BELL SOUTH 10899
CLEARMASTER
10883
CLEARMAX 10883
COOLMAX
10883
DIGEO
11187
DIGI
10637
DIRECTOR
10476
DUMONT
10637
GENERAL INSTRUMENT
10003, 10276,
10476, 10810
GOLDSTAR 10144
HAMLIN
10009, 10273
I3 MICRO
11602
JERROLD
10003, 10012,
10014, 10276,
10476, 10810
MACOM
10033
MEMOREX
10000
MOTOROLA 10014, 10276,
10476, 10810,
11187, 11254,
11376
MULTITECH 10883
MYRIO
11602
PACE
10008, 10237,
11877
PANASONIC 10000, 10107
PANTHER
10637
PARAGON
10000
PHILIPS
10317, 11305
PIONEER
10144, 10533,
10877, 11877
PULSAR
10000
QUASAR
10000
RADIOSHACK
10883
RCA
11256
REGAL
10273, 10279
RUNCO
10000
SAMSUNG
10144
SCIENTIFIC ATLANTA
10008, 10017,
10477, 10877,
11877
SEJIN
11602
SONY
11006
STARCOM
10003
SUPERCABLE
10276
SUPERMAX 10883
THOMSON
11256
TOCOM
10012
TORX
10003
TOSHIBA
10000
TRISTAR
10883
V2
10883
VIEWMASTER10883
VISION
10883
VORTEX VIEW10883
ZENITH
10000, 10525,
10899
APPENDIX-i
CABLE/PVR
COMBINATION
AMERICAST 10899
DIGEO
11187
GENERAL INSTRUMENT
10476, 10810
JERROLD
10476, 10810
MOTOROLA 10476, 10810,
11187, 11376
PACE
10237, 11877
PIONEER
10877, 11877
RCA
11256
SCIENTIFIC ATLANTA
10877, 11877
SONY
11006
SUPERCABLE
10276
THOMSON
11256
ZENITH
10899
DBS/PVR
COMBINATION
DIRECTV
10099, 10392,
10639, 11076,
11142, 11377,
11392, 11442,
11443, 11444,
11640
DISH NETWORK SYSTEM
10775, 11505
DISHPRO
10775, 11505
ECHOSTAR
10775, 11170,
11505
EXPRESSVU 10775
HUGHES NETWORK SYSTEMS
11142, 11442,
11443, 11444
JVC
11170
MOTOROLA 10869
PHILIPS
11142, 11442
PROSCAN
10392
RCA
11392
SAMSUNG
11442
SONY
10639, 11640
STAR CHOICE
10869
SATELLITE RECEIVER
ALPHASTAR 10772
CHAPARRAL 10053, 10216
CROSSDIGITAL
11109
DIRECTV
10099, 10247,
10392, 10566,
10639, 10724,
10749, 10819,
11076, 11108,
11109, 11142,
11377, 11392,
11414, 11442,
11443, 11444,
11609, 11639,
11640, 11749,
11856
DISH NETWORK SYSTEM
10775, 11005,
11170, 11505,
11775
DISHPRO
10775, 11005,
11505, 11775
ECHOSTAR
10269, 10280,
10775, 11005,
11170, 11505,
11775
EXPRESSVU 10775, 11775
GE
10392, 10566
GENERAL INSTRUMENT
10869
GOI
10775, 11775
GOODMANS 11246
HISENSE
11535
HITACHI
10819, 11250
HOMECABLE 10238
HTS
10775, 11775
HUGHES
10749, 11442,
11749
HUGHES NETWORK SYSTEMS
10749, 11142,
11442, 11443,
11444, 11749
ILO
11535
IQ
10210
IQ PRISM
10210
JERROLD
10869
JVC
10775, 11170,
11775
LEGEND
10269
LG
11226, 11414
MAGNAVOX 10722, 10724
MEMOREX
10269, 10724
MITSUBISHI 10749
MOTOROLA 10856, 10869
NEC
11270
NEXT LEVEL 10869
PANASONIC 10247, 10701
PAYSAT
10724
PHILIPS
10099, 10722,
10724, 10749,
10819, 11076,
11142, 11442,
11749
PIONEER
11442
PROSCAN
10392, 10566
PROTON
11535
RADIOSHACK
10869
RCA
10143, 10392,
10566, 10855,
11392
REALISTIC
10052
SAMSUNG
11108, 11109,
11142, 11276,
11377, 11442,
11609
SANYO
11219
SONY
10639, 11639,
11640
STAR CHOICE 10869
STS
10210
TIVO
11142, 11442,
11443, 11444
TOSHIBA
10082, 10749,
10790, 10819,
11285, 11749
ULTIMATETV 11392, 11640
UNIDEN
US DIGITAL
USDTV
VOOM
ZENITH
10052, 10074,
10238, 10722,
10724
11535
11535
10869
11856
HDTV DECORDER
ACCURIAN
11653
EPSON
11563, 11650
LG
11415
MACRO IMAGE TECHNOLOGY
11383
MOTOROLA 11363
MYHD
11383
PANASONIC 11120
PIONEER
11010
PRINCETON 10113, 10295
SAMSUNG
11190, 11490
SASEM
11641
SENSORY SCIENCE
11126
SHARP
11010
SYLVANIA
11563
TELEMANN 11604
VIEWSONIC 11329
VIZIO
11126
OTHER VIDEO
ACCESSORIES
ABS
11272
ACCURIAN
11653
ALIENWARE 11272
CYBERPOWER
11272
D-LINK
11554
ECS
11553
EPSON
11563, 11650
GATEWAY
11272
HEWLETT PACKARD
11267, 11272
HOWARD COMPUTERS
11272
HP
11272
HUSH
11272
IBUYPOWER 11272
INTERVIDEO 11393
KEYSPAN
11344
KWORLD
11403
LEADTEK
11614
LG
11415
LINKSYS
11272, 11365
MACRO IMAGE TECHNOLOGY
11383
MEDIA CENTER PC
11272
MICROSOFT 11272
MIND
11272
MOTOROLA 11363
MYHD
11383
NIVEUS MEDIA
11272
NORTHGATE 11272
PANASONIC 11120
PINNACLE SYSTEMS
11268
PIONEER
11010
PRINCETON 10113, 10295
RICAVISION 11272
ROKU
11486
SAMSUNG
11190, 11490
SASEM
11641
SENSORY SCIENCE
11126
SHARP
11010
SMC
11456
SONY
11272, 11324,
11364
STACK 9
11272
STREAMZAP 11309
SYLVANIA
11563
SYSTEMAX 11272
TAGAR SYSTEMS
11272
TELEMANN 11604
TOSHIBA
11272
TOUCH
11272
VIEWSONIC 11272, 11329
VIZIO
11126
VOODOO
11272
ZT GROUP
11272
TV
ADMIRAL
ADVENT
20093, 20463
20761, 20783,
20815, 20817,
20842, 21933
AIKO
20092
AIWA
20701
AKAI
20030, 20060,
20672, 20702,
20812, 21903
ALBATRON 20700, 20843
AMERICA ACTION
20180
AMPRO
20751
ANAM
20180
AOC
20030
APEX DIGITAL
20156, 20748,
20765, 20767,
20879, 21943
AUDIOVOX
20092, 20180,
20451, 20623,
20802, 20875,
21937, 21951,
21952
AVENTURA 20171
AXION
21937
BELL & HOWELL
20154
BENQ
21032
BOXLIGHT
20893
BRADFORD 20180
BROKSONIC 20180, 20236,
20463, 21929,
21935, 21938
CANDLE
20030
CARNIVALE 20030
CARVER
20054
CELEBRITY 20000
CELERA
20765
CHANGHONG
20765
CITIZEN
20030, 20060,
20092, 21928
CLARION
20180
COMMERCIAL SOLUTIONS
20047, 21447
CONTEC
20180
CRAIG
20180
CROSLEY
20054
CROWN
20180
CURTIS MATHES
20030, 20047,
20054, 20060,
20093, 20145,
20154, 20166,
20451, 20466,
20702, 21147,
21347, 21919
CXC
20180
DAEWOO
20092, 20451,
20623, 20661,
20672, 21661,
21928
DELL
21080, 21178,
21454
DENON
20145, 20511
DUMONT
20017
DURABRAND 20171, 20178,
20180, 20463,
21034
DWIN
20093, 20720,
20774
ELECTROBAND
20000
ELECTROGRAPH
21755
EMERSON
20038, 20154,
20171, 20178,
20180, 20236,
20451, 20463,
20623, 21928,
21929, 21944
ENVISION
20030, 20813
EPSON
20833, 20840
ESA
20171, 20812
FISHER
20154
FUJITSU
20683, 20809,
20853
FUNAI
20171, 20180,
21904
FUTURETECH
20180
GATEWAY
21755, 21756
GE
20047, 20051,
20178, 20451,
21147, 21347,
21447, 21917,
21919, 21922
GIBRALTER 20017, 20030
GO VIDEO
20886
GOLDSTAR 20030, 20178,
21926
GOODMANS 20360
GRUNDIG
20683
GRUNPY
20180
HAIER
21034
HALLMARK 20178
HARLEY DAVIDSON
21904
HARMAN/KARDON
20054
HARVARD
20180
HAVERMY
20093
HELIOS
20865
HELLO KITTY
20451
HISENSE
20748
HITACHI
20038, 20145,
20151, 20413,
21145, 21904,
21960
HYUNDAI
20849
INFINITY
20054
INTEQ
20017
JBL
20054
JCB
JENSEN
JVC
KEC
KENWOOD
KLH
KTV
LG
LLOYD'S
LOEWE
LXI
20000
20761, 20815,
20817, 21933
20053, 20069,
20160, 20169,
20731, 21253
20180
20030, 20859
20765, 20767,
21962
20030, 20180
20178, 20442,
20700, 20856,
21178, 21265
21904
20136
20047, 20054,
20154, 20156,
20178
PENNEY
PHILCO
PHILIPS
PILOT
PIONEER
POLAROID
PORTLAND
PRIMA
PRINCETON
PRISM
PROSCAN
MAGNASONIC
21928
20030, 20054,
20706, 20802,
21254, 21454,
21904, 21931,
21944
MARANTZ
20030, 20054,
20704, 20854,
20855, 21154,
21454
MATSUSHITA 20250, 20650
MAXENT
21755
MEGAPOWER
20700
MEGATRON 20145, 20178
MEMOREX
20150, 20154,
20178, 20463,
21926
MGA
20030, 20150,
20155, 20178
MIDLAND
20017, 20047,
20051
MITSUBISHI 20014, 20093,
20150, 20155,
20178, 20331,
20358, 20836,
20868, 21250,
21917
MONIVISION 20700, 20843
MOTOROLA 20093
MTC
20030, 20060
MULTITECH 20180
NAD
20156, 20178,
20866
NEC
20030, 20497,
20882, 21704
NETTV
21755
NIKKO
20030, 20092,
20178
NORCENT
20748, 20824
NTC
20092
ONWA
20180
OPTIMUS
20154, 20166,
20250, 20650
OPTOMA
20887
OPTONICA
20093
ORION
20236, 20463,
21463, 21929
PANASONIC 20051, 20226,
20250, 20650,
20863, 21410,
21919, 21941,
21946, 21947
MAGNAVOX
PROTON
PULSAR
QUASAR
20030, 20047,
20051, 20060,
20156, 20178,
21347, 21919,
21926
20030, 20054
20054, 20690,
21154, 21454
20030
20038, 20166,
20679, 20866
20765, 20865
20092
20761, 20783,
20815, 20817,
21933
20700, 20717
20051
20047, 20466,
21347, 21447,
21922
20178, 20466
20017
20051, 20250,
20650, 21919
RADIOSHACK
20030, 20047,
20154, 20178,
20180, 21904
RCA
20038, 20047,
20090, 20679,
21047, 21147,
21247, 21347,
21447, 21547,
21917, 21919,
21922, 21948,
21953, 21958
REALISTIC
20030, 20154,
20178, 20180
RUNCO
20017, 20030,
20497, 20603
SAMPO
20030, 21755
SAMSUNG
20030, 20060,
20178, 20587,
20702, 20766,
20812, 20814,
21060, 21903,
21959
SANSUI
20463, 21904,
21929, 21935
SANYO
20088, 20154,
20484, 20799,
20893
SCOTCH
20178
SCOTT
20178, 20180,
20236
SEARS
20047, 20054,
20154, 20156,
20171, 20178,
21904, 21926
SHARP
20093, 20153,
20491, 20688,
20689, 20818,
20851, 21917
SHENG CHIA 20093
SOLE
20813
SONY
20000, 20011,
20080, 20111,
20810, 20834,
20867, 21100,
21904, 21925
SOUNDESIGN
20178, 20180
SOVA
21952
APPENDIX-ii
SQUAREVIEW
20171
SSS
20180
STARLITE
20180
STUDIO EXPERIENCE
20843
SUPERSCAN 20093, 20864
SUPREME
20000
SVA
20587, 20748,
20865, 20870,
20871, 20872
SYLVANIA
20030, 20054,
20171, 21931,
21944
SYMPHONIC 20171, 20180,
21904
TANDY
20093
TATUNG
21756
TECHNICS
20051, 20250
TECHVIEW
20847
TECHWOOD 20051
TEKNIKA
20054, 20060,
20092, 20150,
20180
TELEFUNKEN
20702
THOMAS
21904
TMK
20178
TNCI
20017
TOSHIBA
20060, 20154,
20156, 20650,
20832, 20845,
21156, 21256,
21265, 21356,
21656, 21704,
21918, 21935,
21936, 21945
TVS
20463
VECTOR RESEARCH
20030
VICTOR
20053
VIDIKRON
20054
VIDTECH
20178
VIEWSONIC 20857, 20864,
20885, 21755
VIZIO
20864, 20885,
21756
WARDS
20030, 20054,
20080, 20111,
20178, 20866,
21156
WAYCON
20156
WESTINGHOUSE
20451, 20889
WHITE WESTINGHOUSE
20463, 20623
YAMAHA
20030, 20650,
20769, 20833,
20839, 21405,
21406, 21407
ZENITH
20017, 20092,
20178, 20463,
21145, 21904,
21929
PVR
ABS
31972
ALIENWARE 31972
CYBERPOWER31972
DELL
31972
DIRECTV
30739
GATEWAY
31972
HEWLETT PACKARD
31972
APPENDIX-iii
HOWARD COMPUTERS
31972
HP
31972
HUGHES NETWORK SYSTEMS
30739
HUMAX
30739
HUSH
31972
IBUYPOWER 31972
LG
32010
LINKSYS
31972
MEDIA CENTER PC
31972
MICROSOFT 31972
MIND
31972
NIVEUS MEDIA
31972
NORTHGATE 31972
PANASONIC 30616, 31807,
31808, 31809
PHILIPS
30618, 30739
RCA
30880
REPLAYTV
30614, 30616
SONIC BLUE 30614, 30616
SONY
30636, 31972
STACK 9
31972
SYSTEMAX 31972
TAGAR SYSTEMS
31972
TIVO
30618, 30636,
30739
TOSHIBA
31008, 31972
TOUCH
31972
VIEWSONIC 31972
VOODOO
31972
ZT GROUP
31972
VCR
ABS
ADMIRAL
31972
30048, 30209,
30479
AIKO
30278
AIWA
30037
AKAI
30041
ALIENWARE 31972
AMERICA ACTION
30278
AMERICAN HIGH
30035
ASHA
30240
AUDIOVOX
30037, 30278
BEAUMARK 30240
BELL & HOWELL
30104
BROKSONIC 30002, 30121,
30184, 30209,
30479
CALIX
30037
CANON
30035
CARVER
30081
CCE
30072, 30278
CITIZEN
30037, 30278
COLT
30072
CRAIG
30037, 30047,
30072, 30240
CURTIS MATHES
30035, 30041,
30060, 30162
CYBERNEX 30240
CYBERPOWER
31972
DAEWOO
30045, 30278
DELL
31972
DENON
30042
DIRECTV
30739
DURABRAND
30038, 30039
ELECTROHOME
30037, 30043
ELECTROPHONIC
30037
EMEREX
30032
EMERSON
30002, 30037,
30043, 30121,
30184, 30209,
30278, 30479,
30593, 31593
FISHER
30047, 30104
FUJI
30033, 30035
FUNAI
30593, 31593
GATEWAY
31972
GE
30035, 30060,
30240
GO VIDEO
30240, 30432
GOLDSTAR
30037, 30038
HARMAN/KARDON
30038, 30081
HARWOOD
30072
HEWLETT PACKARD
31972
HI-Q
30047
HITACHI
30041, 30042
HOWARD COMPUTERS
31972
HP
31972
HUGHES NETWORK SYSTEMS
30042, 30739
HUMAX
30739, 31988
HUSH
31972
IBUYPOWER 31972
JENSEN
30041
JVC
30041, 30067,
31162
KEC
30037, 30278
KENWOOD
30038, 30041,
30067
KLH
30072
KODAK
30035, 30037
LG
31037, 32010
LINKSYS
31972
LOGIK
30072
LXI
30037
MAGNASONIC
30593
MAGNAVOX 30035, 30039,
30081, 30149,
30563, 30593
MAGNIN
30240
MARANTZ
30035, 30081
MARTA
30037
MATSUSHITA 30035, 30162,
31162
MEDIA CENTER PC
31972
MEI
30035
MEMOREX
30035, 30037,
30039, 30047,
30048, 30104,
30162, 30209,
30240, 30479,
31037, 31162,
31262
MGA
30043, 30240
MGN TECHNOLOGY
30240
MICROSOFT 31972
MIND
31972
MINOLTA
30042
MITSUBISHI 30043, 30067
MOTOROLA 30035, 30048
MTC
MULTITECH
NEC
30240
30072
30038, 30041,
30067, 30104
NIKKO
30037
NIVEUS MEDIA
31972
NOBLEX
30240
NORTHGATE 31972
OLYMPUS
30035
OPTIMUS
30037, 30048,
30104, 30162,
30432, 30593,
31048, 31062,
31162, 31262
ORION
30002, 30184,
30209, 30479
PANASONIC 30035, 30162,
30616, 31062,
31162, 31244,
31262, 31562,
31807, 31808,
31809
PENNEY
30035, 30037,
30038, 30042,
30240
PENTAX
30042
PHILCO
30035
PHILIPS
30035, 30081,
30618, 30739,
31081, 31181
PILOT
30037
PIONEER
30067
POLK AUDIO 30081
PROFITRONIC
30240
PROSCAN
30060
PROTEC
30072
PULSAR
30039
QUASAR
30035, 30162,
31162
RADIOSHACK
31037
RADIX
30037
RANDEX
30037
RCA
30042, 30060,
30149, 30240,
30880
REALISTIC
30035, 30037,
30047, 30048,
30104
REPLAYTV
30614, 30616
RICAVISION 31972
RUNCO
30039
SAMSUNG
30045, 30240,
30739
SANKY
30039, 30048
SANSUI
30041, 30067,
30209, 30479
SANYO
30047, 30104,
30240
SCOTT
30043, 30045,
30121, 30184
SEARS
30035, 30037,
30042, 30047,
30104
SHARP
30048, 30848
SHINTOM
30072
SHOGUN
30240
SINGER
30072
SONIC BLUE 30614, 30616
SONY
30032, 30033,
30035, 30636,
31032, 31972
STACK 9
31972
STS
SYLVANIA
30042
30035, 30043,
30081, 30593,
31593
SYMPHONIC 30593, 31593
SYSTEMAX 31972
TAGAR SYSTEMS
31972
TATUNG
30041
TEAC
30041
TECHNICS
30035, 30162
TEKNIKA
30035, 30037
TIVO
30618, 30636,
30739, 31503
TMK
30240
TOSHIBA
30043, 30045,
30209, 31008,
31972, 31988
TOTEVISION 30037, 30240
TOUCH
31972
UNITECH
30240
VECTOR
30045
VECTOR RESEARCH
30038
VIDEO CONCEPTS
30045
VIDEOMAGIC 30037
VIDEOSONIC 30240
VIEWSONIC 31972
VOODOO
31972
WARDS
30035, 30042,
30047, 30048,
30060, 30072,
30081, 30149,
30240
WHITE WESTINGHOUSE
30072, 30209
XR-1000
30035, 30072
YAMAHA
30038
ZENITH
30033, 30039,
30209, 30479,
31139
ZT GROUP
31972
DVD PLAYER
ADCOM
41094
ADVENT
41016
AIWA
40641
AKAI
40899, 41089
ALCO
40790
ALLEGRO
40869
AMPHION MEDIA WORKS
40872
AMW
40872
APEX DIGITAL
40672, 40717,
40755, 40794,
40796, 40797,
40830, 41004,
41020, 41061,
41100
ASPIRE DIGITAL
41407
AUDIOVOX
40790, 41041,
41071, 41072,
41121, 41122
AXION
41071, 41072
B&K
40655, 40662
BEL CANTO DESIGN
41571
BLAUPUNKT 40717
BLUE PARADE40571
BROKSONIC 40695, 40868
CALIFORNIA AUDIO LABS
40490
CINEVISION 40833, 40869,
40876
CITIZEN
41277
COBY
40778, 40852,
41107, 41177,
41351
CURTIS MATHES
41087
CYBERHOME
40816, 40874,
41023, 41024,
41117
DAEWOO
40705, 40833,
40869, 41169,
41172, 41234,
41242
DAYTEK
40872
DENON
40490
DESAY
41407
DISNEY
40675, 41270
DUAL
41068, 41085
DURABRAND
41127
DVD2000
40521
EMERSON
40591, 40675,
40821, 41268
ENTERPRISE 40591
FUNAI
40675, 41268
GATEWAY
41073, 41077
GE
40522, 40717,
40815
GO VIDEO
40715, 40741,
40744, 40783,
40833, 40869,
41044, 41075,
41099
GO VISION
41071, 41072
GOLDSTAR 40741
GPX
40699, 40769
GRADIENTE 40490
GREENHILL 40717
GRUNDIG
40539
HARMAN/KARDON
40582, 40702
HITACHI
40573, 40664,
41247
HITEKER
40672
INITIAL
40717
INTEGRA
40571, 40627
JATON
41078
JBL
40702
JENSEN
41016
JSI
41423
JVC
40558, 40623,
40867
JWIN
41049, 41051
KAWASAKI
40790
KENWOOD
40490, 40534,
40682, 40737
KLH
40717, 40790,
41020, 41149,
41261
KONKA
40711
KOSS
40651, 41423
LANDEL
40826
LASONIC
40798, 41173
LECSON
41533
LENOXX
41127
LG
40591, 40741,
40801, 40869
LOEWE
40511
MAGNAVOX 40503, 40539,
40675, 40821
MALATA
MARANTZ
MCINTOSH
MEMOREX
MICROSOFT
MINTEK
MITSUBISHI
MOMITSU
MYRYAD
NAD
40782, 41159
40539
41273, 41533
40695, 41270
40522
40717, 40839
40521, 41521
41082
40894
40591, 40692,
40741
NAKAMICHI 41222
NEC
40785
NESA
40717
NEXT BASE 40826
NORCENT
40872, 41003,
41107, 41265
ONKYO
40503, 40627,
40792, 41627
ORITRON
40651
PANASONIC 40490, 40503,
40632, 40703,
41762
PHILIPS
40503, 40539,
40675, 40854,
41260, 41267,
41354
PIANODISC 41024
PIONEER
40525, 40571,
40632, 41571
POLAROID
41020, 41061
POLK AUDIO 40539
PRIMA
41016
PRINCETON 40674
PROCEED
40672
PROSCAN
40522
PROVISION
40778
QWESTAR
40651
RCA
40522, 40571,
40717, 40790,
40822, 41022,
41132, 41193
RIO
40869
RJTECH
41360
ROTEL
40623, 41178
ROWA
40823
SAMPO
40698, 40752
SAMSUNG
40490, 40573,
40744, 40820,
40899, 41044,
41075
SANSUI
40695
SANYO
40695, 40873
SHARP
40630, 40675,
40752, 41256
SHARPER IMAGE
41117
SHERWOOD 40633, 41043,
41077
SHINSONIC 40533, 40839
SIGMA DESIGNS
40674
SONIC BLUE 40869, 41099
SONY
40533, 40864,
41017, 41033,
41533
SOVA
41122
SUNGALE
41074
SUPERSCAN 40821
SVA
40860, 41105
SYLVANIA
40675, 40821,
41268
SYMPHONIC 40675, 41268
TAG MCLAREN
40894
TEAC
40790, 40809
TECHNICS
40490, 40703
TECHNOSONIC
40730
TECHWOOD 40692
THETA DIGITAL
40571
TOSHIBA
40503, 40695,
41154
TREDEX
40799, 40800,
40803, 40804
URBAN CONCEPTS
40503
US LOGIC
40839
VENTURER 40790
VIZIO
41064, 41226
XBOX
40522
YAMAHA
40490, 40539,
40545, 41543
YAMAKAWA 40872
ZENITH
40503, 40591,
40741, 40869
ZOECE
41265
LD PLAYER
AIWA
CARVER
DENON
DISCO VISION
40203
40064, 40194,
40323
40059, 40172
40023
FUNAI
40203
HARMAN/KARDON
40194
HITACHI
40023
MAGNAVOX 40194, 40217
MARANTZ
40064, 40194
MITSUBISHI 40059
NAD
40059
OPTIMUS
40059
PANASONIC 40204
PHILIPS
40064, 40194
PIONEER
40023, 40059
POLK AUDIO
40194
QUASAR
40204
REALISTIC
40203
SAMSUNG
40323
SEGA
40023
SONY
40193, 40201
TECHNICS
40204
THETA DIGITAL
40194
YAMAHA
40217
DVD RECORDER
APEX DIGITAL
51056
ASPIRE DIGITAL
51168
COBY
51086
CYBERHOME
51129
FUNAI
50675, 51334
GATEWAY
51073, 51158
GO VIDEO
50741, 51158,
51304, 51730
ILO
51348
JVC
51164, 51275
LG
50741
LITEON
51158, 51416,
51440
MAGNAVOX 50646
APPENDIX-iv
PANASONIC
50490, 51010,
51011
PHILIPS
50646
PIONEER
50631, 51475,
51476
POLAROID
51086
RCA
50522
SAMSUNG
50490
SENSORY SCIENCE|
51158
SHARP
50675, 51550,
51556, 50630
SONY
51033, 51069,
51070, 51431
SYLVANIA
50675
TOSHIBA
51510
VICTOR
51275
YAMAHA
51544
ZENITH
50741
CD PLAYER
AIWA
60157
ARCAM
60157
BURMESTER 60420
CALIFORNIA AUDIO LABS
60029, 60303
CARVER
60157, 60179
DENON
60003, 60034
DKK
60000
DMX ELECTRONICS
60157
FISHER
60179
GARRARD
60393, 60420
GENEXXA
60032
HARMAN/KARDON
60157
HITACHI
60032
INTEGRA
60101
JVC
60072
KENWOOD
60028, 60190,
60626
KLH
61318, 61372,
61711
KRELL
60157
LINN
60157
MAGNAVOX 60038, 60157
MARANTZ
60029, 60038,
60157, 60180,
60435, 60626
MCINTOSH
60256, 60290,
60660
MCS
60029
MIRO
60000
MISSION
60157
MTC
60420
NSM
60157
ONKYO
60101, 61327
OPTIMUS
60000, 60032,
60087, 60179,
60420, 60468
PANASONIC 60029, 60303,
60388, 60752
PARASOUND 60420
APPENDIX-v
PHILIPS
60157, 60274,
60626
PIONEER
60032, 60468,
61062
POLK AUDIO 60157
PROCEED
60420
PROTON
60157
QED
60157
QUAD
60157
QUASAR
60029
RCA
60032, 60053,
60179, 60420,
60468, 61062
REALISTIC
60179, 60180,
60420
ROTEL
60157, 60420
SAE
60157
SANSUI
60157
SANYO
60087, 60179
SHARP
60180
SHERWOOD 60180
SONIC FRONTIERS
60157
SONY
60000, 60490
SUGDEN
60157
TAG MCLAREN
60157
TASCAM
60420
TEAC
60180, 60378,
60393, 60420
TECHNICS
60029, 60303
VICTOR
60072
WARDS
60053, 60157
YAMAHA
60036, 60490,
61907
CD RECORDER
HARMAN/KARDON
71202
JVC
71294
KENWOOD
70626
KLH
71373
LG
71208
MARANTZ
70626
PHILIPS
70626
PIONEER
71062, 71087
RCA
70053, 70420
SONY
70000, 70100,
71364
TDK
71208
TEAC
70420
YAMAHA
70888, 71292
MD RECORDER
DENON
KENWOOD
ONKYO
OPTIMUS
PIONEER
SHARP
SHERWOOD
SONY
YAMAHA
70873
70681, 70826
70868
71063
71063
70861
71067
70490
70490, 70888,
71909
TAPE DECK
AIWA
70029, 70197
CARVER
70029
DENON
70076
HARMAN/KARDON
70029, 70182
JVC
70244, 70273
KENWOOD
70070
MAGNAVOX 70029
MARANTZ
70029
ONKYO
70135, 70282
OPTIMUS
70027, 70220
PANASONIC 70229
PHILIPS
70029
PIONEER
70027, 70099,
70220
POLK AUDIO
70029
RCA
70027, 70220
SANSUI
70029
SONY
70170, 70243,
70291
TECHNICS
70229
VICTOR
70273
WARDS
70027
YAMAHA
70094, 70097,
70524
TUNER
ADC
ADCOM
80531
80616, 81616,
81617
AIWA
80121, 80158,
80189, 81405
AMC
81077
AMPLIFIER TECHNOLOGIES
81584
ANAM
81074, 81609
ARCAM
81189
ATLANTIC TECHNOLOGY
81487
AUDIOTRONIC
81189
AUDIOVOX
81627
B&K
80701, 80820,
80840
BEL CANTO DESIGN
81584
BK
80702
BOSE
81933
BOSTON ACOUSTICS
81918
BRIX
81602
CAPETRONIC 80531
CARVER
80008, 80121,
80189, 80360,
81189
CLASSE
81916
DELPHI
81414
DENON
80121, 81360
EMERSON
80424
FISHER
80219, 80360
FOSGATE
81487
GARRARD
80424
GATEWAY
81567
HARMAN/KARDON
80110, 80189,
80891, 81304
INTEGRA
80135, 81320
JBL
80110
JVC
80074, 81058,
81811
KENWOOD
80027, 80077,
81313, 81569,
81570
KLH
81428
KOSS
80424
LEXICON
81076
LINN
80189
MAGNAVOX 80189, 80531,
81189, 81269
MARANTZ
80039, 80189,
80200, 81189,
81269
MCS
80039, 80346
MICROMEGA 81189
MITSUBISHI 81393
MYRYAD
81189, 81918
NAD
80320
NAKAMICHI 80347, 81313,
81555, 81919
NIRO
81908
ONKYO
80135, 81320
OPTIMUS
80177, 80219,
80531, 80670,
81023, 81074
OUTLAW
81487
OUTLAW AUDIO81487
PANASONIC 80039, 80309,
81308, 81518
PHILIPS
80189, 81189,
81269
PIONEER
80014, 80150,
80531, 80630,
81023
POLK AUDIO 80189, 81414
QUASAR
80039
RCA
80054, 80346,
80360, 80531,
81023, 81074,
81154, 81609
REALISTIC
80163
SAMSUNG
81304
SANSUI
80189, 80346,
81189
SANYO
80219
SCOTT
80163, 80322
SHERWOOD 81077, 81423,
81567, 81918
SIRIUS
81602, 81627,
81811
SONY
80158, 81058,
81406, 81759
SOUNDESIGN
80670
STEREOPHONICS
81023
SUNFIRE
81313
TEAC
TECHNICS
80163, 81074
80039, 80309,
81308, 81518
THORENS
81189
TOSHIBA
80135
VICTOR
80074
WARDS
80014, 80054,
80158, 80189
XM
81406, 81414
YAMAHA
80176, 81176,
81276, 81331,
81375, 81908,
(TUNER ID1)
81916
(TUNER ID2)
81917
(XM ID1)
81918
(XM ID 2)
81919
OTHER AUDIO
ACCESSORIES
YAMAHA (iPod)
81981
APPENDIX-vi
HTR-5960_U_cv.fm Page 1 Friday, December 2, 2005 1:57 PM
U
HTR-5960
HTR-5960
AV Receiver
© 2006
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
OWNER’S MANUAL
Printed in Malaysia
WG73830