DVD Video Player
MODEL
DV-S1(RU)
OPERATION MANUAL
Please read this Operation Manual carefully
before using your DVD Video Player.
The region number for this DVD player is 5.
5
Downloaded From Disc-Player.com Sharp Manuals
NTSC/PAL
DIGITAL VIDEO
SAFETY INFORMATION
•
•
Note:
This Player can be used only where the power supply is
AC 110V-240V, 50/60Hz. It cannot be used elsewhere.
•
CAUTION:
This Player is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT label is located on the
rear cover.
This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product. Refer
all servicing to qualified personnel.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS PLAYER IS
HARMFUL TO THE EYES, DO NOT ATTEMPT TO
DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
AUDIO OUT
DIGITAL
R
VIDEO OUT
COMPONENT
L
Y
CR
VIDEO
CB
S-VIDEO
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
Laser Diode Properties
Material: GaAs
Wave length: DVD 650 nm / CD 780 nm
Emission Duration: Continuous
Laser output: Max. 0.8 mW
CAUTION - VISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.
AVOID EXPOSURE TO BEAM.
Power Cord Protection
To avoid any malfunctions of the Player, and to protect
against electric shock, fire or personal injury, please observe
the following.
• Hold the plug firmly when connecting or disconnecting the
AC power cord.
• Keep the AC power cord away from heating appliances.
• Never put any heavy object on the AC power cord.
• Do not attempt to repair or reconstruct the AC power cord
in any way.
Downloaded From Disc-Player.com Sharp Manuals
–2–
EN
SAFETY INFORMATION
Location and Handling
Service
•
Do not attempt to service this Player yourself. Please refer
any service to the nearest service centre approved by
SHARP.
•
•
•
•
Do not place your Player in enclosed spaces or do not
cover it to prevent excessive temperatures inside the
Player.
Do not place the Player in direct sunlight, or near heat
sources.
Keep the Player away from strong magnetic objects.
Do not place any object containing water or other liquids
on the Player. In the event that liquid should enter the
cabinet, unplug the Player immediately and contact the
retailer or service centre approved by SHARP immediately.
Do not remove the Player cabinet. Touching parts inside
the cabinet could result in electric shock and/ or damage
to the Player. For service and adjustment inside the cabinet, call a qualified dealer or service centre approved by
SHARP.
Nonuse Periods
When the Player is not being used, switch the Player to the
Standby mode.
When left unused for a long period of time, the Player should
be unplugged from the household AC outlet.
No Fingers or Other Objects Inside
Do not put any foreign object on the disc tray.
Stacking
Place the unit in a horizontal position, and do not place anything heavy on it.
Copyright
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Please refer to relevant laws in your
country.
Copy Protection
This Player supports Macrovision copy protection. On DVDs
that include a copy protection code, if the contents of the
DVD are copied using a VCR, the copy protection code prevents the videotape copy from playing normally.
Apparatus Claims of U.S.Patent Nos. 4,631,603,
4,577,216, 4,819,098 and 4,907,093 licensed for limited
viewing uses only.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Condensation
Moisture may form on the pickup lens in the following conditions:
• immediately after a heater has been turned on.
• in a steamy or very humid room.
• when the Player is suddenly moved from a cold environment to a warm one.
If moisture forms inside this Player, it may not operate properly.
In this case, turn on the power and wait about one hour for
the moisture to evaporate.
Cleaning
Unplug your Player before cleaning. Use a damp cloth for
cleaning. Do not use cleaning fluids or aerosols which could
enter the Player and cause damage, fire, or electrical shock.
These substances may also deteriorate the finish of your
Player.
Recommended Measures for Optimum Picture
Excellence
The Player is a precision device that is constructed using
extremely accurate technology.
Soiling or friction affecting the pickup lens or disc drive can
impair the image quality. At the worst, neither video nor
audio will be played back. To obtain optimum picture quality,
the Player should be checked (cleaning and replacement of
some parts) every 1,000 hours. Note that this period varies
depending on the environment (temperature, humidity, dust,
etc.) in which the Player is used. Contact your authorized
Sharp supplier for details.
Do not attempt to clean the pickup lens yourself.
If there is Noise Interference on the TV While a
Broadcast is being Received
Depending on the reception condition of the TV, interference
may appear on the TV monitor while you watch a TV broadcast and the unit is left on. This is not a malfunction of the
Player or the TV. To watch a TV broadcast, turn off the
Player.
Downloaded From Disc-Player.com Sharp Manuals
–3–
EN
PRECAUTIONS
SUPPLIED ACCESSORIES
PLAYABLE DISCS
• Remote control
• Two R6 (AA) batteries
• Operation Manual
• VIDEO/AUDIO cables
This DVD player conforms to the PAL colour system. Also
you can play discs recorded with the NTSC system via a
PAL system TV set.
•Some discs include region codes as shown below.
SYMBOLS USED IN THIS MANUAL
5
The following symbols appear below in some headings and
notes in this manual, with the following meanings!
DVD
: Description refers to playback of DVD video discs.
CD
•The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format can
only be played back on DVD player with the same region
code.
: Description refers to playback of audio CDs.
MP3
: Description refers to playback of MP3 discs.
VCD
: Description refers to playback of video CDs.
ABOUT THE PBC FUNCTION OF VIDEO CD
This unit conforms to ver.1.1 and ver.2.0 of VIDEO CD standard, with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD.
Ver.2.0 (with PBC function): When using a VIDEO CD with
PBC function, “PBC” appears on the display.
What is PBC? “PBC” stands for the PlayBack Control. You
can play interactive software using a menu screens. Refer
to instructions of VIDEO CD.
For Customer Use:
Read carefully the information located at the bottom of your
DVD player and enter below the Serial No.Retain this information for future reference.
Model No. DVD player
Serial No. __________________________
Downloaded From Disc-Player.com Sharp Manuals
–4–
EN
TABLE OF CONTENTS
Repeat ....................................................................14
REPEAT TITLE/CHAPTER ...............................14
REPEAT TRACK ...............................................14
REPEAT A-B......................................................14
Programme .............................................................14
Random Playback ..................................................14
MP3 Playback.........................................................15
On Screen Information ...........................................15
Track Selection .......................................................15
Random Playback .................................................15
Programmed ...........................................................15
Audio Language .....................................................15
Stereo Sound Mode ...............................................15
Subtitle Language...................................................16
Camera Angle.........................................................16
Changing the On-Screen Display...........................16
Parental Control......................................................16
IF YOU FORGET THE PASSWORD ................16
Parental Level.........................................................17
Marker Setup Screen .............................................17
SAFETY INFORMATION ....................................2
PRECAUTIONS...................................................4
SUPPLIED ACCESSORIES .....................................4
SYMBOLS USED IN THIS MANUAL .......................4
PLAYABLE DISCS....................................................4
FUNCTIONAL OVERVIEW .................................6
FRONT PANEL.........................................................6
REAR VIEW .............................................................6
Display Message ......................................................6
REMOTE CONTROL................................................7
Loading the Batteries ...............................................7
SETTING UP YOUR DVD PLAYER....................8
Connecting to a TV or a stereo TV that has
COMPONENT VIDEO in jacks.................................8
Connecting a TV Equipped with S-VIDEO Input or
VIDEO/AUDIO Input Jacks.......................................9
Connecting to Audio Equipment ...............................9
Playing 2 channel audio ......................................9
Playing Dolby Digital (5.1 channel), DTS or
MPEG audio ......................................................11
DVD SETUP ......................................................18
Audio Setting ..........................................................18
Black Level Setting .................................................18
Display Setting........................................................18
Language Setting ...................................................19
DVD OPERATION .............................................12
Basic Playback .......................................................12
General Features....................................................12
Disc menus.............................................................12
Title Menu ...............................................................12
Pause ....................................................................12
Step by Step playback ..........................................13
Resume ..................................................................13
Fast Forward / Reverse Search .............................13
Slow Motion ............................................................13
Zoom ......................................................................13
Track.......................................................................13
Title/chapter ............................................................14
Time Search ...........................................................14
TROUBLESHOOTING ......................................20
SPECIFICATIONS .............................................21
MAINTENANCE ................................................21
Downloaded From Disc-Player.com Sharp Manuals
–5–
EN
FUNCTIONAL OVERVIEW
FRONT PANEL
2
3
5
4
OPEN/CLOSE
PLAY
STOP
OPERATE
STILL/PAUSE
STILL/
PAUSE
STANDBY
SKIP
REV
9
1
8 7
FWD
6
REAR VIEW
AUDIO OUT
DIGITAL
10
11
R
12
VIDEO OUT
COMPONENT
L
Y
CR
VIDEO
CB
S-VIDEO
13 14 15
1. OPERATE
to switch the player to ON or OFF
2. Disc tray
3. OPEN/CLOSE
to open/close the disc tray
4. PLAY
to start, pause or resume disc playback
5. STOP
to stop playback
6. FWD/SKIP
goes to next chapter or track during playback; press and
hold for three seconds for a forward search
7. SKIP/REV
goes to previous chapter or track during playback; press
and hold for three seconds for a reverse search
8. STILL/PAUSE
to pause the current disc operation
9. Display, Remote Sensor, STANDBY LED
10. MAINS (AC Power Cord)
connect to a standard AC outlet
11. DIGITAL (Digital audio out)
connect to AUDIO inputs of a digital (coaxial) audio
equipment
12. AUDIO OUT (Left/Right)
connect to AUDIO inputs of an amplifier, receiver or
stereo system
13. VIDEO OUT
connect to the Video Input of a TV
14. COMPONENT VIDEO OUT
connect to a TV with Component video in jacks
15. S-VIDEO Out
connect to a TV with S-Video inputs
Caution: Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause permanent
damage to the unit.
Display Message
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
Downloaded From Disc-Player.com Sharp Manuals
–6–
EN
FUNCTIONAL OVERVIEW
REMOTE CONTROL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
25
OPEN/
OPERATE ON SCREEN DIRECT SKIP CLOSE
24
AUDIO
1
2
3
4
5
6
7
8
9
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
STILL/PAUSE
0
C
+10
SKIP
PLAY
REV
FWD
STOP
SETUP
23
MENU
TITLE
MODE
ENTER
ZOOM
15
RETURN
22
21
20
19
18
17
16
Loading the Batteries
1. Open the battery compartment cover.
2. Insert two R6 (AA) batteries, with each one oriented
correctly.
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
1. ON SCREEN
to access or remove the display screen during DVD or
Audio CD playback
2. OPERATE
switch DVD player ON or OFF
3. AUDIO
to choose audio languages or sound modes
4. SUBTITLE
subtitle language DVD selector
5. ANGLE
select DVD camera angle
6. REPEAT
repeat chapter, track, title, disc
7. A-B REPEAT
repeat a specific segment
8. CLEAR
to reset the setting
9. STILL/PAUSE
pause playback temporarily / frame-by-frame playback
10. h
to view DVD picture in fast reverse motion
11. PLAY
to start a DVD disc playback
12. SETUP
to access or remove the DVD setup menu
13. MODE
to set up programmed or random playback (Audio CD)
to set the black level during DVD playback
14. ZOOM
enlarge DVD video image
15. TITLE
to display title menu of a disc
16. ENTER
acknowledge menu selection
17. RETURN
to return previous or remove setup menu
18. Arrow(L K B s)
(left/right/up/down) select an item in the menu
19. MENU
to display the menu of the DVD disc
20. STOP
to stop a DVD disc playback
21. g
to view DVD picture in fast forward motion
22. SKIP H,G
to skip chapter/tracks
23. 0-9 numerical key pad
select numbered items in a menu
+10
use this button to enter number 10 and above
24. OPEN/CLOSE
to open/close the disc tray
25. DIRECT SKIP
to locate a desired point
Downloaded From Disc-Player.com Sharp Manuals
–7–
EN
SETTING UP YOUR DVD PLAYER
CAUTION:
•
•
•
•
Be sure to turn off the Player and equipment to be connected before connecting.
Read through the operation manual for the equipment to be connected.
Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cables.
Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.
Connecting to a TV or a stereo TV that has component video in jacks
DVD Player
AUDIO OUT
DIGITAL
R
(Red)
VIDEO OUT
COMPONENT
L
Y
CR
VIDEO
CB
S-VIDEO
(White)
To COMPONENT
VIDEO OUT jacks
To ANALOG
AUDIOOUT jacks
COMPONENT cable
(commercially available)
To COMPONENT
VIDEO INPUT jacks
AUDIO cable
(supplied)
TV
To ANALOG
AUDIO INPUT jacks
(White)
(Red)
ANALOG INPUT
R
VIDEO INPUT
COMPONENT
L
Y
CR
CB
CAUTION:
•
Do not connect the Player to a VCR. If you view the
Picture on your TV after making the connections shown
on the right, a picture noise may appear. Connect the
Player to your TV directly.
DVD
Player
VCR
TV
Downloaded From Disc-Player.com Sharp Manuals
–8–
EN
SETTING UP YOUR DVD PLAYER
Connecting a TV Equipped with S-VIDEO Input or VIDEO/AUDIO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector to the Player,
you should use an S-VIDEO cable (commercially available) to connect the TV to the Player.
DVD Player
AUDIO OUT
DIGITAL
R
VIDEO OUT
COMPONENT
L
Y
CR
VIDEO
CB
S-VIDEO
(White) (Yellow)
(Red)
To VIDEO/AUDIO
OUT jacks
To S-VIDEO
OUT jack
VIDEO/AUDIO cables
(supplied)
S-VIDEO cable
(commercially available)
(Red)
(White)
(Yellow)
To S-VIDEO
INPUT jack
To VIDEO/AUDIO
INPUT jacks
L
R
AUDIO
INPUT
VIDEO
INPUT
S-VIDEO
INPUT
TV (with external input jacks)
•
•
When the Player is connected to a TV using both a VIDEO cable and an S-VIDEO cable, only the S-VIDEO connection is
enabled (the VIDEO connection is disabled).
You will not be able to hear all of the sound being output by the Player if you use the VIDEO/AUDIO cables (supplied) to a
monaural TV that has only one AUDIO input jack.
NOTE:
•
•
•
Be sure that the colours of the jacks and plugs match up when connecting the cable.
Connect the Player directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection function will scramble the picture.
If you want to listen to the audio through audio equipment, connect only the S-VIDEO or VIDEO cable to the TV.
Connecting to Audio Equipment
Connecting the Player to audio equipment provides normal stereo sound plus powerful stereo sound enhanced by Dolby
Digital (5.1 channel), DTS, and MPEG Audio.
Playing 2 channel audio
C Analogue Connection
DVD Player
AUDIO OUT
DIGITAL
R
VIDEO OUT
COMPONENT
L
(Red)
Y
CR
VIDEO
CB
S-VIDEO
(White)
To AUDIO
OUT jacks
AUDIO cable
(supplied)
To amplifier
audio input jacks
Amplifier of stereo system, etc.
ANALOG INPUT
(White)
Jack and Plug Colours
Audio Left: White
Audio Right: Red
L
R
(Red)
Downloaded From Disc-Player.com Sharp Manuals
–9–
EN
SETTING UP YOUR DVD PLAYER
C Digital Connection
You can make this connection using a coaxial digital cable.
DVD Player
AUDIO OUT
DIGITAL
R
VIDEO OUT
COMPONENT
L
Y
CR
VIDEO
CB
S-VIDEO
To DIGITAL AUDIO
(COAXIAL) OUT jack
Coaxial digital cable
(commercially available)
Audio equipment with
coaxial digital input jack
DIGITAL INPUT
To DIGITAL AUDIO
(COAXIAL) INPUT jack
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.
C Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
•
•
Audio CD
Play the disc as you normally would, with the audio mode set to “L+R”. With a digital connection, audio of a disc recorded
with DTS sounds abnormal in this case.
DVD
With a digital connection, audio cannot be produced from a DVD recorded in Dolby Digital (5.1 channel), Dolby Surround
(Pro Logic), DTS or MPEG Audio.
You should use an analogue connection to play Dolby Digital (5.1 channel) and MPEG Audio. (Dolby Surround (Pro Logic)
and DTS audio cannot be produced with an analogue connection).
Discs with linear PCM audio should play normally.
Downloaded From Disc-Player.com Sharp Manuals
– 10 –
EN
SETTING UP YOUR DVD PLAYER
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/DTS/MPEG Audio
surround processor to your Player’s coaxial digital jack provides richer and more powerful audio play.
C Connection to a processor or amplifier with a coaxial digital input jack
You can make this connection using a coaxial digital cable.
y
AUDIO OUT
DIGITAL
R
VIDEO OUT
COMPONENT
L
Y
CR
VIDEO
CB
S-VIDEO
To DIGITAL AUDIO
(COAXIAL) OUT jack
Coaxial digital cable
(commercially available)
Dolby Digital (5.1 ch)/DTS/
MPEG Audio processor or amplifier
DIGITAL INPUT
COAXIAL
To DIGITAL AUDIO
(COAXIAL) INPUT jack
NOTES:
•
This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial digital
input jack.
ANALOG AUDIO OUT of the DVD player is not available on the DTS audio.
•
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s
75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and
video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of
the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable
from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked
“ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE
•
The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
Downloaded From Disc-Player.com Sharp Manuals
– 11 –
EN
DVD OPERATION
Basic Playback
General Features
DVD
CD
VCD
Getting started
•
•
•
Turn on the power of the TV, amplifier and any other components which are connected to the DVD.
Make sure the TV and audio receiver (commercially available) are set to the correct channel.
When you play NTSC disc, the NTSC signal will convert
to a modified PAL signal.
1 Press OPERATE.
• “P-ON” will appear briefly on the display panel.
2 Press OPEN/CLOSE to open disc loading tray.
3 Place the chosen disc in the tray, with the label
facing up.
DVD or Video CDs may contain menus to navigate the disc
and access special features. Press the appropriate numerical
key or use Arrow ( L / K / B / s ) to highlight your selection
in the DVD menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
Cancelling PBC (for playback of a Video CD)
1 Insert a Video CD. (Playback will start automatically.)
2 Press STOP.
3 Enter track number of your choice with numerical
key pad.
4 PBC is now cancelled and the playback of the
Video CD will start.
Disc menus
DVD
4 Press PLAY.
• Playback starts automatically.
5 Press STOP to stop playback.
NOTE:
• DVDs may have a region code. Your DVD player will
not play discs that have a region code different from
the region code of your DVD player.
1 Press MENU.
• The DVD’s main menu will appear.
2 If a title menu is no available,
symbol may
appear on the TV screen.
3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and
other options will appear for selection.
4 Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
Title Menu
DVD
1 Press TITLE.
• The title menu will appear.
2 If a title menu is no available,
symbol may
appear on the TV screen.
3 Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
VCD
1 The title menu will appear.
2 Press numerical key pad to select the menu.
Playback will start.
Pause
DVD
CD
VCD
1 During playback, press PAUSE.
• Playback will pause and sound will be muted.
2 To continue playback, press PLAY.
Downloaded From Disc-Player.com Sharp Manuals
– 12 –
EN
DVD OPERATION
Step by Step playback
Zoom
DVD
VCD
DVD
VCD
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
1 During playback, press PAUSE.
• Playback will pause and sound will be muted.
2 The disc goes forward by one frame each time
1 Press ZOOM during playback.
• Playback will continue.
2 Press ZOOM repeatedly to select the required
PAUSE is pressed.
3 To exit step by step playback, press PLAY.
zoom factor: x2, x4 or OFF.
Resume
3 Use Arrow ( L / K / B / s ) to move the zoomed
picture across the screen.
DVD
CD
VCD
4 To exit zoom mode, press ZOOM to OFF in the
menu bar.
1 During playback, press STOP.
• Resume message will appear on the TV screen.
2 Press PLAY, playback will resume from the point
Track
at which playback was stopped.
CD
• To cancel resume, press STOP twice.
NOTE
• Some Video CDs with PBC function resume playback
from the beginning of the track.
VCD
There are three ways to begin playback on an Audio CD at a
specific Track.
Using the Numerical key pads
1 Press numerical key pad to enter the desired
Track number.
Fast Forward / Reverse Search
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
• To play track 26, press +10, 2, 6 on the numerical key
pad.
DVD
1 During playback, press g or h repeatedly to
select the required forward or reverse speed: x2,
x8, x30, x60.
2 To return to normal playback, press PLAY.
Using the DIRECT SKIP
VCD
• During playback, press g or h repeatedly to select
the required forward or reverse speed: x2, x8, x30.
CD
1 Press DIRECT SKIP.
• The track search display appears.
2 Within 30 seconds, select a desired track number using
numerical key pad.
• Playback will start at the selected track.
NOTE:
• DIRECT SKIP doesn’t function when you play the
Video CD with PBC function.
• Use g or h to select the required forward or
reverse at x16 the normal playback speed.
Using the SKIP H G
Slow Motion
DVD
VCD
1 During playback, press PAUSE.
2 Press g.
• Slow motion playback will begin and sound will be
muted.
3 Press g repeatedly to select the required speed:
1/16, 1/8, 1/2 of the normal playback.
4 To return to normal playback, press PLAY.
1 Press SKIP G to move to the next track.
2 Press SKIP G or H repeatedly to skip subsequent or
to return of the current tracks.
• Track number will appear briefly on the DVD display
panel.
• When playback is paused, pressing SKIP will start the
track playing automatically.
NOTE:
• SKIP H G are not available when playback is
stopped.
Downloaded From Disc-Player.com Sharp Manuals
– 13 –
EN
DVD OPERATION
Title/chapter
Programme
DVD
CD
You may determine the order in which tracks will play.
1 In stop mode, press MODE.
• The programme screen will appear.
1 Press DIRECT SKIP to display the Title/Chapter
Search on the TV screen.
2 Enter the desired title/chapter number using
numerical key pad.
PROGRAM
TIME
0:00:00
1/1
--
Time Search
DVD
CD
VCD(without PBC function)
START: PLAY
RANDOM: MODE
DELETE: CLEAR
EXIT: RETURN
1 During playback, press DIRECT SKIP twice to dis-
play the Time Search on the TV screen.
2 Enter the desired track numbers using numerical
2 Within 30 seconds, enter a desired disc time using
numerical key pad.
key pad.
3 Press PLAY to play the programmed tracks.
• Playback will start at the specified time.
3 Press CLEAR to erase the incorrect input.
Repeat
Random Playback
• REPEAT are available only during playback.
REPEAT TITLE/CHAPTER
CD
DVD
•
•
•
To repeat the current chapter, press REPEAT.
REPEAT CHAPTER appears on the TV screen.
To repeat the current title, press REPEAT twice.
REPEAT TITLE appears on the TV screen.
To exit Repeat mode, press REPEAT three times.
REPEAT OFF appears on the TV screen.
This shuffles the playing order of tracks instead of playback
in the sequence.
1 In stop mode, press MODE twice.
• RANDOM screen appears.
2 Press PLAY to start random playback.
REPEAT TRACK
CD
•
•
•
VCD
To repeat the current track, press REPEAT.
REPEAT TRACK appears on the TV screen.
To repeat the entire disc, press REPEAT twice.
REPEAT ALL appears on the TV screen.
To exit Repeat mode, press REPEAT three times.
REPEAT OFF appears on the TV screen.
NOTE:
•
Repeat playback is not available when you play the Video
CD with PBC function.
REPEAT A-B
DVD
CD
VCD
1 Press Repeat A-B at your chosen starting point.
REPEAT A- appears briefly on the TV screen.
2 Press Repeat A-B again at your chosen end point.
• REPEAT A-B appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit the sequence, press Repeat A-B.
•
Downloaded From Disc-Player.com Sharp Manuals
– 14 –
EN
DVD OPERATION
MP3 Playback
Random Playback
MP3
When a CD with MP3 files in the DVD player, the MP3 menu
will appear on the TV screen.
1 In stop mode, press K or L to select the desired
MP3
1 Press MODE twice during playback is stopped.
2 Press PLAY to play the tracks in random order.
Album or Track.
• To play a chosen track, press PLAY or ENTER.
• To play a chosen album, press K or L to select the
desired track,then press PLAY or ENTER.
• Choose FIRST PLAY to start playback from the beginning of the listed tracks.
• Press TITLE to return to the first item.
2 Press STOP to stop playback.
NOTE:
•
Programmed
MP3
1 Press MODE during playback is stopped.
2 Press K or L to select a track, then press ENTER.
• Press CLEAR to erase the incorrect input.
Folders are known as Albums; files are known as Tracks.
PROGRAM - ALBUM01
+ALBUM11
+ALBUM12
TRACK11
TRACK12
TRACK13
1/11
On Screen Information
MP3
START: PLAY
RANDOM: MODE
You can check the MP3 files during playback.
1 Press ON SCREEN.
• The playing track will be highlighted.
2 Press ON SCREEN again to show the elapsed
TRACK11
1/1
DELETE: CLEAR
EXIT: RETURN
3 Press PLAY to start programmed playback.
playing time appear at the top of the display.
•
will be displayed when the repeat play has been
selected.
T - indicates Track repeat
A - indicates Album (folder) repeat
D - indicates Disc repeat
Audio Language
DVD
The DVD player allows you to select a language during DVD
disc (if multi language available) playback.
1 Press AUDIO during playback.
2 Press AUDIO repeatedly to select your desired
3 Press ON SCREEN again to exit.
Track Selection
language.
MP3
1 Press DIRECT SKIP during playback.
• The SEARCH menu will appear.
• The current track will be highlighted.
NOTE:
• When a DVD disc with MPEG 5.1CH Audio is played
back, MPEG 6.0CH might appear instead of MPEG
5.1CH on the screen.
2 Press K or L to select a desired track.
Stereo Sound Mode
CD
ALBUM NAME
+ALBUM01
TRACK11
TRACK12
TRACK13
TRACK14
SELECT:
RETURN:
/
VCD
1 Press AUDIO repeatedly during playback to select
between AUDIO STEREO, AUDIO L-CH or AUDIO
R-CH.
1/15
ENTER:
START: PLAY
3 Press PLAY to start playing
4 Press RETURN or DIRECT SKIP to exit.
AUDIO STEREO - both right and left channels are active
(stereo)
AUDIO L-CH - only left channel is active
AUDIO R-CH - only right channel is active
Downloaded From Disc-Player.com Sharp Manuals
– 15 –
EN
DVD OPERATION
Subtitle Language
Parental Control
DVD
The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.
1 Press SUBTITLE during playback.
2 Press SUBTITLE repeatedly to select your desired
subtitle language.
• The available languages appears on the right of the
subtitle display.
3 To turn off subtitles, press s / B or SUBTITLE
DVD
Password
Parental Control limits the disc viewing that exceed your settings with a password or playback will stop.
The ‘Parental Control’ feature allows you to prevent discs
from being played by your children or to have certain discs
played with alternative scenes.
1 Press SETUP during playback is stopped.
repeatedly until OFF appears.
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
Camera Angle
SELECT:
EXIT:
DVD
/
SETUP
SET:
ENTER
CANCEL: RETURN
2 Press K or L to select PARENTAL, then press
ENTER.
Some DVD discs contain scenes which have been shot
simultaneously from various angles.
SET-UP
1 Press ANGLE during playback.
2 Press ANGLE repeatedly to select your desired
PARENTAL CONTROLS
PASSWORD
different angle appears on the right of the angle
display.
Please enter a 4-digit password.
----
EXIT: SETUP
Changing the On-Screen Display
DVD
You can check information about the current disc by pressing
the ON SCREEN on the remote control.
1 Press ON SCREEN during playback to show cur-
rent Chapter.
3 Enter your four-digit password.
• If for the first time, enter any four digits, then press
ENTER.
• To change the password, press K or L to select
CHANGE, then press ENTER. Enter the four-digit
password, then press ENTER.
4 Press SETUP to exit.
• The elapsed and remaining playing time of the current
chapter will be displayed.
2 Press ON SCREEN again to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3 Press ON SCREEN the third time.
• The BIT RATE, layer number (if available) and the current repeat setting will be displayed.
4 Press ON SCREEN the fourth time to remove the
display.
CD
CANCEL: RETURN
IF YOU FORGET THE PASSWORD
1 Press SETUP during playback is stopped.
2 Press K or L to select PARENTAL, then press
ENTER.
3 Enter the 4, 7, 3, 7.
• Password will be cleared and parental level will be set
ALL.
4 Press SETUP to exit.
VCD
1 Press ON SCREEN during playback, the current
Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press ON SCREEN again to show current Total
Track.
• The elapsed and remaining playing time of the current
total track will be displayed.
3 Press ON SCREEN the third time to remove the
display.
Downloaded From Disc-Player.com
Sharp Manuals
– 16 –
EN
DVD OPERATION
Parental Level
Marker Setup Screen
DVD
Parental Level allows you to set the rating level of your DVD
discs. Playback will stop if the disc’s ratings exceed the level
you set.
1 Press SETUP during playback is stopped.
2 Press K or L to select PARENTAL, then press
ENTER.
3 Enter your four-digit password.
4 Press K or L to select PARENTAL LEVEL, then
press ENTER.
SET-UP
DVD
VCD(without PBC function)
Use markers to memorise your favourite places on a disc.
1 Press DIRECT SKIP three times during playback.
• The display screen and Markers will appear on the TV
screen.
2 Press s or B to select 1, 2, 3, 4 or 5 and ensure
that “NOT SET” appears in the display.
3 When reaches the desired point, press ENTER.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4 To return to the Marker later, press DIRECT SKIP
three times during playback and s or B to choose
the desired marker, then press ENTER.
PARENTAL CONTROLS
1.PARENTAL LEVEL
2.CHANGE
CD
ALL
NOTE:
SELECT:
EXIT:
/
SETUP
• Opening the disc tray or turning off the power or select
AC at step 2 and press ENTER will erase all Markers.
SET:
ENTER
CANCEL: RETURN
5 Press K or L to select the desired level.
6 Press SETUP to exit.
Downloaded From Disc-Player.com Sharp Manuals
– 17 –
EN
DVD SETUP
Audio Setting
Display Setting
Choose the appropriate Audio settings for your equipment as
it only affect during the playback of DVD discs of the DVD
player.
NOTE:
•
These audio settings are effective only when using a digital connection. Although you may change the settings from
the on-screen display, these audio settings do not actually
affect the sound when using an analogue connection.
1 Press SETUP during playback is stopped.
2 Press K or L to select AUDIO, then press ENTER.
3 Press K or L to choose the below items and press
You can change certain aspects of the DVD’s display
screens, on-screen messages and the display panel on the
front of the DVD player.
1 Press SETUP during playback is stopped.
2 Press K or L to select DISPLAY, then press
ENTER.
3 Press K or L to select the below items, then press
ENTER.
TV Aspect:
• Press K or L for an item selection, then press
ENTER.
• Select 4:3 LETTER BOX for a black bars appears on
the top and bottom of the screen.
• Select 4:3 PAN & SCAN for a full height picture with
both sides trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.
• The default setting is 4:3 LETTER BOX.
ENTER repeatedly to turn the setting ON or OFF.
Dynamic Range Control (DRC):
• The default setting is OFF.
• To compress the range of sound volume.
Dolby Digital :
• The default setting is BITSTREAM.
(BITSTREAM : Output by Dolby Digital)
(DPCM : Convert the Dolby Digital to D-PCM)
Set to BITSTREAM when the unit is connected to Dolby
Digital Decoder.
Panel Display:
• Press K or L to select BRIGHT, DIMMER and AUTO,
then press ENTER.
• This adjust the brightness of the display panel with the
factory default BRIGHT.
• When AUTO is selected, the display dims only during
playback.
DTS:
• The default setting is OFF.
Set to ON when the unit is connected to DTS Decoder.
(ON: Output by DTS)
Angle Icon:
• Press ENTER repeatedly to turn Angle icon ON or
OFF.
• The default setting is ON.
MPEG:
• The default setting is OFF.
(ON : Output by MPEG sound)
(OFF: Convert the MPEG to PCM)
Set to ON when the unit is connected to MPEG Decoder.
Auto Power Off:
• Press ENTER repeatedly to turn Auto Power ON or
OFF.
• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.
DOWN SAMPLING:
• The default setting is AUTO.
• Press ENTER, then K or L to select AUTO, 48kHz or
96kHz. Press ENTER again to confirm selection.
• Select 96kHz if the disc was recorded in PCM 96kHz,
otherwise select 48kHz.
4 Press SETUP to exit.
4 Press SETUP to exit.
Black Level Setting
Adjust the Black Level Settings to make the black parts of
the picture as bright as you prefer.
1 Press MODE during playback.
2 Press ENTER repeatedly to select ON or OFF.
ON: makes the dark parts brighter.
OFF: shows the original picture as recorded.
Downloaded From Disc-Player.com Sharp Manuals
– 18 –
EN
DVD SETUP
Language Setting
Language options are not available with some discs.
1 Press SETUP during playback is stopped.
2 Press K or L to select LANGUAGE, then ENTER
to confirm.
• The setup screen will be displayed.
SET-UP
LANGUAGE CONTROLS
1.AUDIO
2.SUBTITLE
3.DISC MENU
4.PLAYER MENU
SELECT: /
EXIT: SETUP
ORIGINAL
OFF
ORIGINAL
ENGLISH
SET:
ENTER
CANCEL: RETURN
3 Press K or L to select AUDIO, SUBTITLE, DISC
MENU or PLAYER MENU, then ENTER to confirm.
4 Press K or L to select a setting, then press
ENTER.
• If OTHER is selected in the AUDIO, SUBTITLE or
DISC MENU screen, press four-digit number to enter
the code for the desired language.
• Only the languages supported by the disc can be
selected.
5 Press SETUP to exit.
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Code
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
Language
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Code
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Language
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3 letter language code, the code will be displayed everytime you change
the Audio or Subtitle language setting on pages 15 and 16. If you choose any other languages, ‘---’ will be disinstead.
(3Manuals
letter language code is written in bracket.)
Downloaded From played
Disc-Player.com
Sharp
– 19 –
EN
TROUBLESHOOTING
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the
system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.
Problem
Solution
No power
No picture
–Check if the AC power cord is properly connected.
–Check if the TV is switched on.
–Check the video connection.
–Sometimes a small amount of picture distortion may appear.This is
not a malfunction.
–Connect DVD player directly to the TV.
–Make sure the disc is compatible with the DVD player.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
–Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
–Check that the VIDEO/AUDIO cables are connected to the correct
device. (See Connecting to a TV)
–Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from centre to edge.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Reset the unit by switching the player off, then on
again.
–Aim the remote control directly at the sensor on
the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD player for repair.
Distorted picture
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
No audio at digital output
No DTS audio at analog output
No sound and picture
Picture freezes momentarily
during playback
Disc can’t be played
No return to start-up screen when
disc is removed
The player does not respond to
the remote control
Buttons do not work or player stops
responding
Player does not respond to some
operating commands during playback.
DVD player cannot read
CDs/DVDs
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
Downloaded From Disc-Player.com Sharp Manuals
– 20 –
EN
SPECIFICATIONS
PRODUCT TYPE
DVD Player
CONNECTIONS
Video output
One RCA connector, 1 Vpp (75 ohm)
Component video output One pin jack (Y), 1 Vpp (75 ohm)
Two pin jacks CR/CB, 700m Vpp
(75 ohm)
S-Video output
Mini DIN 4-pin jack (75 ohm)
Analog audio output
Two RCA connectors (one left
channel, one right channel)
2 Vrms (47 kilo-ohm)
Coaxial digital audio output One pin jack, 500mVpp (75 ohm)
DISCS
DVD video
Audio CD
Video CD
CD-R
CD-RW
OUTPUT SIGNAL FORMAT
PAL colour
FREQUENCY RESPONSE
DVD (linear sound) : 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD :
20 Hz to 20 kHz
SIGNAL-TO-NOISE RATIO (S/N RATIO)
CD :
110 dB (JEITA)
POWER SOURCE
110-240 V ~ +/- 10%, 50/60 Hz +/- 0.5%
POWER CONSUMPTION
14 W (standby: 3.8W)
OPERATING TEMPERATURE
5°C to 40°C
DYNAMIC RANGE
DVD (linear sound) : 95 dB
CD :
94 dB (JEITA)
DIMENSIONS
W 435mm
H 75mm
D 211mm
TOTAL DISTORTION FACTOR
CD :
0.005% (JEITA)
WEIGHT
Approx 2.1kg
WOW AND FLUTTER
Below the measurement limitation (+/-0.001% W PEAK)
(JEITA)
• Designs and specifications are subject to change
without notice.
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analogue
records.
Cleaning the disc lens
• After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens
with CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with the cleaner.
Make your contribution to the environment!!!
• Spent batteries do not belong in the dustbin.
• You can dispose of them at a collection point for spent batteries or special waste.
Contact your council for details.
Downloaded From Disc-Player.com Sharp Manuals
– 21 –
EN
MEMO
Downloaded From Disc-Player.com Sharp Manuals
– 22 –
EN
MEMO
Downloaded From Disc-Player.com Sharp Manuals
– 23 –
EN
Downloaded From Disc-Player.com Sharp Manuals
0VMN03292