Samsung DVD-R135 Instruction manual

R135-XAA-ENG-01-13
2006.3.11
9:53 AM
Page 1
Instruction Manual
DVD-R135
www.samsung.com
US
AK68-01049A-00
R135-XAA-ENG-01-13
2006.3.11
9:53 AM
Page 2
Getting Started
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: FCC regulations state that any unauthorized
changes or modifications to this equipment may
void the user's authority to operate it.
This symbol indicates important instructions
accompanying the product.
■
This unit can be used only where the power
supply is AC 120V, 60Hz. It cannot be used
elsewhere.
■
This DVD Recorder is designed and
manufactured to respond to the Region
Management Information.
If the Region number of a DVD disc does
not correspond to the Region number of
this DVD Recorder, the DVD Recorder
cannot play the disc.
■
This device is protected by U.S. Patent
Nos.4,631,603;4,577,216;4,819,098;4,907,
093; and 6,516,132.This product
incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights.Use of
this copyright protection technology must
be authorized by Macrovision,and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision.Reverse engineering or
disassembly is prohibited.
NOTE
Do not install this equipment in a confined space such as a
bookcase or similar unit.
WARNING : To prevent damage which may result in fire or
electric shock hazard, do not expose this appliance to rain
or moisture.
CAUTION : DVD RECORDERS USE AN INVISIBLE
LASER BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE RECORDER CORRECTLY AS
INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTIONS
Caution: To prevent electric shock, match wide blade of
plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la
lame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with
electric appliances, such as radios and televisions, use
shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
2 - English
R135-XAA-ENG-01-13
2006.3.11
9:53 AM
Page 3
Precaution
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two
blades with one wider than the other. A groundingtype plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. if the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as a power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Handling Cautions
• Before connecting other components to this
recorder, be sure to turn them all off.
• Do not move the recorder while a disc is being
played, or the disc may be scratched or broken, and
the recorder’s internal parts may be damaged.
• Do not put a flower vase filled with water or any
small metal objects on the recorder.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC
power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for
cleaning.
• Wipe the cabinet with a soft cloth.
Disc Handling
• Use discs with regular
shapes. If an irregular disc
(a disc with a special
shape) is used, this DVD
Recorder may be damaged.
Holding discs
• Avoid touching the surface of a
disc where recording is
performed.
DVD-RAM, DVD-RW and DVD-R
• Clean with an optional DVD-RAM/PD
disc cleaner (LF-K200DCA1 where
available). Do not use cleaners or
cloths for CDs to clean DVD-RAM/DVDRW/DVD-R discs.
DVD-Video, CD
• Wipe off dirt or contamination on the disc with a soft
cloth.
Cautions on handling discs
• Do not write on the printed side with a ball-point pen
or pencil.
English - 3
Getting Started
Important Safety Instructions
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc
tray.
• Exterior interference such as lightning and static
electricity can affect normal operation of this
recorder. If this occurs, turn the recorder off and on
again with the POWER button, or disconnect and
then reconnect the AC power cord to the AC power
outlet.
The recorder will operate normally.
• Be sure to remove the disc and turn off the recorder
after use.
• Disconnect the AC power cord from the AC outlet
when you don’t intend to use the recorder for long
periods of time.
• Clean the disc by wiping in a straight line from the
inside to the outside of the disc.
Getting Started
R135-XAA-ENG-01-13
2006.3.11
10:44 AM
Page 4
• Do not use record cleaning sprays or antistatic. Also,
do not use volatile chemicals, such as benzene or
thinner.
• Do not apply labels or stickers to discs. (Do not use
discs fixed with exposed tape adhesive or leftover
peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers available
on the market.
• Do not load warped or cracked discs.
Disc Storage
Be careful not to harm the disc because the data on
these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
• If you move your DVD Recorder suddenly from a
cold place to a warm place, condensation may
generate on the operating parts and lens and cause
abnormal disc playback. When this occurs, do not
connect the plug to the power outlet. Wait for two
hours, then insert the disc and try to playback again.
It will work properly when condensation has
evaporated.
• Only MP3 files with the ".mp3", ".MP3" extension
can be used.
• For MP3 files recorded with a VBR(Variable Bit
Rates), from 32 Kbps to 320 Kbps, the sound may
cut in out.
• Playable bitrate range is from 56Kbps to 320Kbps.
• The unit can handle a maximum of 1000 files and
folders.
JPEG CD-R/-RW
• Only JPEG files with the ".jpg", ".JPG" extension can
be used.
• The unit can handle a maximum of 1000 files and folders.
• Maximum size of progressive JPEG is 3M pixels.
• MOTION JPEG is not supported.
• DVD-RAM/-RW/-R discs recorded with JPEG files
can be played back.
Using MPEG4 disc
• Disc : CD-R/-RW, DVD-R/-RW
• MPEG4 File with following extensions can be played.
: .avi, .divx, .AVI, .DIVX
• MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x
• Available Audio Format : “MP3”, “MPEG”, “PCM”,
“AC3”, “DTS”
• Supported subtitle file formats: .smi, .srt, .sub, .psb,
.txt, .ass
Disc Specifications
Using CD-R/-RW
DVD-Video
• A digital versatile disc (DVD) can contain up to 135minutes of images, 8-language audio and 32 subtitle
languages. It is equipped with MPEG-2 picture
compression and Dolby 3D surround sound, allowing
you to enjoy vivid and clear theater quality images in
the comfort of your own home.
• When switching from the first layer to the second
layer of a double-layered DVD Video disc, there may
be momentary distortion in the image and sound.
This is not a malfunction of the unit.
• Once a DVD-R/-RW recorded in Video Mode is
finalized, it becomes DVD-Video.
• Use a 700MB(80 minutes) CD-R/-RW disc.
If possible, do not use a 800MB(90 minutes) or
above disc, as the disc may not play back.
• If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, and all recorded files may not play.
• Some CD-R/-RW discs may not be playable with
this unit, depending on the device which was used
to burn them.
For contents recorded on CD-R/-RW media from
CDs for your personal use, playability may vary
depending on contents and discs.
DVD-R Disc Playback and Recording
Audio CD
• An audio disc on which 44.1kHz PCM Audio is
recorded
• Plays CD-DA format audio CD-R and CD-RW discs.
The unit may not be able to play some CD-R or CDRW discs due to the condition of the recording.
CD-R/-RW
MP3 CD-R/-RW
• Only CD-R discs with MP3 files recorded with
ISO9660 or JOLIET format can be played back
4 - English
• Once a DVD-R recorded is finalized, it becomes
DVD-Video.
• You can record onto the available space on the
disc and perform editing functions such as giving
titles to discs and programs and erasing programs
before finalizing.
• When programming is erased from a DVD-R, that
space does not become available. Once an area
on a DVD-R is recorded on, that area is no longer
available for recording, whether the recording is
erased or not.
• It takes about 30 seconds for the unit to complete
recording management information after recording
finishes.
R135-XAA-ENG-01-13
2006.3.11
10:44 AM
Page 5
DVD-RW Disc Playback and Recording
• Recording and playback can be performed on
DVD-RW discs in both the Video and VR Modes.
• Once a DVD-RW recorded in VR Mode or Video
mode is finalized, you cannot perform addtional
recording.
• Once a DVD-RW recorded in Video Mode is
finalized, it becomes DVD-Video.
• In both modes, playback can be performed before
and after finalization, but additional recording,
deleting and editing can not be performed after
finalization.
• If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute format.
Be careful when executing Format because all the
recorded data may be lost.
• A DVD-RW blank disc is initialized to VR Mode
when first initialized.
• DVD-RW (VR mode)
- This is a format that is used for recording data on
DVD-RW disc. You can record multiple titles, edit,
delete, partial delete, create a playlist, etc.
- A disc that is recorded in this mode will not play in
standard DVD players.
• DVD-RW (Video mode)
- This is a format that is used for recording data on
a DVD-RW or DVD-R disc. The disc can be
played by an existing DVD player once it has
been finalized.
- If a disc that has been recorded in Video Mode
by a different maker’s recorder but has not been
finalized, it cannot be played or additionally be
recorded by this recorder.
DVD-RAM Disc Playback
• DVD-RAM discs come with or without a cartridge.
For this product, we recommend DVD-RAM discs
that come without cartridges.
• You cannot play a DVD-RAM in most DVD players
due to compatibility issues.
• Only DVD-RAM standard Version 2.0. discs can be
played in this unit.
• For cartridge type DVD-RAM discs, remove the
cartridge and use the disc only.
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because
of this, you should only connect your DVD Recorder directly
to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected DVD discs.
• This product incorporates copyright protection
technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Protection
This DVD Recorder can allow you to protect the contents of
your discs, as described below.
• Program-protection : See page 75 “Locking a Title”
• Disc-protection : See page 87 “Disc Protection”
✻ DVD-RAM/DVD-RW/DVD-R discs that are incompatible with
the DVD-VIDEO format cannot be played with this product.
✻ For more information on DVD recording compatibility,
consult your DVD-RW/DVD-R manufacturer.
✻ If poor quality DVD-RW/DVD-R discs are used, your
recordings may fail.
Do not use the following discs!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not
be used in this product.
[Note]
Disc types that can be played :
CD/CD-R/CD-RW/MP3/JPEG/DVD-Video/DVDRAM/DVD-RW/ DVD-R.
DVD+R/+RW cannot record, but the finalized +R/+RW
can be played.
For a DVD-R/DVD-RW disc, which has been recorded in Video
Mode on another component, it can play only when finalized.
• Some commercial discs and DVD discs purchased outside
your region may not be playable with this product. When
these discs are played, either “No disc." or "The disc
cannot be played. Please check the regional code of the
disc." will be displayed.
• If your DVD-RAM/DVD-RW/-R disc is an illegal copy or is
not in DVD video format, it may also not be playable.
Disc compatibility
High Speed Recording discs can be used in this unit.
• Not all brands of discs will be compatible with this unit.
• The latest firmware upgrade to improve recording & playback
quality can be downloaded from our web site. (Download
Center at www.samsung.com)
• If disc compatibility problems continue, or there is an issue upgrading
your recorder, contact the Call Center at 1-800-SAMSUNG.
English - 5
Getting Started
• This product optimizes the DVD-R for each recording.
Optimizing is carried out when you start recording
after inserting the disc or turning on the unit.
Recording onto the disc may become impossible if
optimizing is carried out too many times.
• Playback may be impossible in some cases due to
the condition of recording.
• This unit can play back DVD-R discs recorded and
finalized with a Samsung DVD video recorder. It
may not be able to play some DVD-R discs
depending on the disc and the condition of the
recording.
R135-XAA-ENG-01-13
2006.3.11
9:53 AM
Page 6
Connecting to your TV . . . . . . . . . . . . . . . . . . . . . . . . . .21
Getting Started
Contents
Connecting to a stereo amplifier with analog
input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Connecting to an AV amplifier with a digital
input jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Step 4 : Connecting HDMI/ DVI to a TV . . . . . . . . .24
Getting Started
Connecting to a TV with HDMI Jack . . . . . . . . . . . . . . .24
Connecting to a TV with DVI Jack . . . . . . . . . . . . . . . .25
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Step 5 : Connecting External Devices . . . . . . . . . . .26
Connecting a VCR, Set-Top Box(STB)
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
or DVD Player to the AV 1 IN or S-VIDEO IN jacks . . . .26
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . .3
Connecting a Camcorder to the AV 2 IN jacks . . . . . . .27
Handling Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Maintenance of Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . .3
Disc Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Disc Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Connecting a Camcorder to the DV IN jack . . . . . . . . . .28
Step 6 : Connecting the Power Cord . . . . . . . . . . . .29
Step 7 : Preparing the Remote Control . . . . . . . . . .29
Disc Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . .8
System Setup
Before Reading the Instruction Manual . . . . . . . . . .9
How to use the DVD Recorder . . . . . . . . . . . . . . . . .9
Using the Setup Menu . . . . . . . . . . . . . . . . . . . . . . .30
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
1. OSD Language Setup . . . . . . . . . . . . . . . . . . . . . . . .31
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
2. Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3. Channel Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
4. Setting Up the Audio Options . . . . . . . . . . . . . . . . . . .34
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5. Setting Up the TV Aspect . . . . . . . . . . . . . . . . . . . . .36
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . .13
System Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
CM Skip Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Connecting & Setting UP
EP Mode Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . .38
Automatic Chapter Creation . . . . . . . . . . . . . . . . . . . . . .38
Quick Recording Setting . . . . . . . . . . . . . . . . . . . . . . . .39
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Step 1 : Connecting the Antenna cable . . . . . . . . .15
Antenna + DVD Recorder + TV : No Cable box . . . . . .15
Antenna + Cable box + DVD Recorder + TV : Cable box
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . .40
Video (Display) Setting . . . . . . . . . . . . . . . . . . . . . .41
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
with many scrambled channels . . . . . . . . . . . . . . . . . . .16
Antenna + DVD Recorder + Cable box +TV : Cable box
Recording
with a few scrambled channels . . . . . . . . . . . . . . . . . . .17
Step 2 : Connecting the Video Cable . . . . . . . . . . .18
Connecting to a Video input jack . . . . . . . . . . . . . . . . . .18
Connecting to an S-video input jack . . . . . . . . . . . . . . .19
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . .45
Recordable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Recording Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Connecting to Component video input jacks(Y, PB, PR) .20
Record Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Step 3 : Connecting the Audio cable . . . . . . . . . . . .21
Unrecordable video . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
6 - English
R135-XAA-ENG-01-13
2006.3.11
9:53 AM
Page 7
About INFO button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Editing
Checking the available disc space
(Disc Information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
watching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Recording from External Equipment . . . . . . . . . . . .49
Copying from a Camcorder . . . . . . . . . . . . . . . . . . .50
Making a One Touch Recording (OTR) . . . . . . . . . .51
Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . . .74
Renaming(Labeling) a Title . . . . . . . . . . . . . . . . . . . . . .74
Locking(Protecting) a Title . . . . . . . . . . . . . . . . . . . . . . .75
Deleting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Deleting a Section of a Title . . . . . . . . . . . . . . . . . . . . .76
Advanced Editing (Playlist) . . . . . . . . . . . . . . . . . . .78
Setting a Timer Recording . . . . . . . . . . . . . . . . . . . .51
Creating a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Flexible Recording (for Timer Recording only) . . . .53
Playing Entries in the Playlist . . . . . . . . . . . . . . . . . . . .79
Editing the Scheduled Record List . . . . . . . . . . . . .53
Renaming a Playlist Entry . . . . . . . . . . . . . . . . . . . . . . .80
Deleting the Scheduled Record List . . . . . . . . . . . .54
Editing a Scene for the Playlist . . . . . . . . . . . . . . . . . . .81
Recording the Scheduled Record List . . . . . . . . . . .55
Copying a Playlist Entry to the Playlist . . . . . . . . . . . . . .84
Deleting a Playlist Entry from the Playlist . . . . . . . . . . . .85
Playback
Disc Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Editing the Disc Name . . . . . . . . . . . . . . . . . . . . . . . . . .86
Disc Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Before Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Formatting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Region code (DVD-Video only) . . . . . . . . . . . . . . . . . . .56
Deleting All Title Lists . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Disc types that can be played . . . . . . . . . . . . . . . . . . . .56
Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Discs that cannot be played . . . . . . . . . . . . . . . . . . . . . .56
Unfinalizing a Disc (V/VR mode) . . . . . . . . . . . . . . . . .90
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Using the Disc Menu & Title Menu . . . . . . . . . . . . . . . .58
Using the Search Functions . . . . . . . . . . . . . . . . . . . . . .58
Additional Information
Slow Motion Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Step Motion Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
About ANYKEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Solution to Error Message . . . . . . . . . . . . . . . . . . . .95
Using the Repeat Function . . . . . . . . . . . . . . . . . . . . . .60
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Selecting the Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Selecting the Audio language . . . . . . . . . . . . . . . . . . . .62
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . .63
Zooming-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Using Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Using Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Playing an Audio CD/MP3 Disc . . . . . . . . . . . . . . .66
Playing an Audio CD (CD-DA)/MP3 Disc . . . . . . . . . . .66
Playing a Picture Disc . . . . . . . . . . . . . . . . . . . . . . .69
Playing an MPEG4 Disc . . . . . . . . . . . . . . . . . . . . . . . .70
Playing the Title List . . . . . . . . . . . . . . . . . . . . . . . . .71
English - 7
Getting Started
Recording the current TV program you are
R135-XAA-ENG-01-13
2006.3.11
9:53 AM
Page 8
High quality progressive scan
Getting Started
General Features
The DVD-R135 allows you to record and play high quality
digital video on DVD-RW/DVD-R discs. You can record
and edit digital video on DVD-RW/DVD-R discs as if they
were VCR tapes.
High quality digital audio and video recording
and playback
Record up to 8-hours of video or images with a 4.7 GB
DVD-RW/DVD-R disc, depending on the recording mode.
Selectable Record Mode
You can set your recorder to one of five different recording
speeds, each varying in recording quality and length. EP
mode yields the most recording time, LP & SP modes
provide less recording time with higher quality recording,
and XP mode gives you the highest quality recording.
There's also the FR (Flexible Recording) mode that lets
you record with the best picture quality possible for the
recording time and remaining space on the disc in timer
recording.
Automated Quality Adjustment for Timer
Recording
If FR mode is selected, the video quality is adjusted
automatically so that all video for the scheduled time can
be recorded onto the free disc space. (See page 51~52.)
Create a DVD video title using a DVD-RW/DVD-R
disc
With the DVD-R135, you can create your own DVD video
title on 4.7 GB DVD-RW/DVD-R discs.
Copying data from a digital camcorder using
a DV input jack
Record digital camcorder video onto DVD-RW, DVD-R
discs using the DV input jack (IEEE 1394-4pin). (See
page 50.)
8 - English
Progressive scanning provides high resolution and flicker
free video.
The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry
provides the highest video playback and recording quality.
(See page 20.)
A variety of functions with an easy-to-use
user interface
The integrated menu system and the messaging function
allow you to perform desired operations both easily and
conveniently. With a DVD-RW disc, you can edit recorded
images, create a playlist, and edit video in a specific
sequence according to your requirements.
MPEG4 playback
This DVD Recorder can play MPEG4 formats within an
avi file.
DivX Certification
DivX, DivX Certified, and associated
logos are trademarks of DivXNetworks,
Inc and are used under license.
HDMI (High Definition Multimedia Interface)
HDMI reduces picture noise by allowing a pure digital
video/audio signal path from the DVD Recorder to your
TV.
R135-XAA-ENG-01-13
2006.3.11
9:53 AM
Page 9
Make sure to check the following before reading the
user’s manual.
How to use the DVD
Recorder
Step 1
Select the disc type
Icons that will be used in manual
Icon
Term
Definition
DVD
This involves a function available
in DVD or DVD-R/DVD-RW
discs that have been recorded
and finalized in Video Mode.
RAM
This involves a function available
in DVD-RAM.
RW
This involves a function available
in DVD-RW.
R
This involves a function available
in DVD-R.
CD
This involves a function available
in a data CD (CD-R or CD-RW).
JPEG
This involves a function available
in a data picture CD(CD-R or
CD-RW).
MP3
This involves a function available
in a data CD(CD-R or CD-RW
on which MP3 is recorded).
MPEG4
This involves a function available
in a data CD-R/-RW,DVD-R/-RW.
Caution
This involves a case where a
function does not operate or
settings may be cancelled.
NOTE
This involves tips or instructions
on the page that help each
function operate.
One-Touch A function that can be operated
button
by using only one button.
ANYKEY A function that can be operated
button
by using ANYKEY button.
About the use of this Instruction Manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~3)
2) If a problem occurs, check the Troubleshooting.
(See pages 91~94)
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc
or you want to edit the disc after recording, select a
rewritable DVD-RW type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts
formatting when an unused disc is inserted. This is
required for the preparation of disc recording.
Using a DVD-RW
This type of disc can be formatted in either DVDVideo format (Video mode) or DVD-Video Recording
format (VR mode). For an unused disc, a message
that asks whether to initialize or not is displayed.
You can play a Video mode disc in standard DVD
players. A VR mode disc allows more varied
editing.
Using a DVD-R
Initializing disc is unnecessary and only V mode
Recording is supported.
You can play this type of disc on various DVD
components only when they have been finalized.
■
NOTE
■
You can only use either the VR or Video
mode on a DVD-RW, but not both at the
same time.
You can change the DVD-RW format to
another format by reinitializing.
It should be noted that the disc's data will
be lost when changing formats.
Copyright
© 2006 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.
English - 9
Getting Started
Before Reading the
Instruction Manual
Getting Started
R135-XAA-ENG-01-13
Step 3
2006.3.11
9:54 AM
Page 10
Recording
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once(mm/dd), MON-FRI,
Every SAT, etc. as a record mode : XP (high quality
mode), SP (standard quality mode), LP (long
recording mode), and EP (extended mode)
according to the record mode. When recording is
set in the FR mode, the best quality picture is
recorded with regards to the remaining time on the
disc.
Step 6
Finalizing & Playing on
other DVD components
To play your DVD on other DVD components,
finalizing may be necessary. First, finish all editing and
recording operations, then finalize the disc.
When using a DVD-RW disc in VR Mode
Although finalizing is generally unnecessary when
playing the disc on a VR Mode compatible
component, a finalized disc should be used for
playback.
When using a DVD-RW disc in Video Mode
The disc should be finalized first to enable playback
on anything other than this recorder. No more editing
or recording can be made on the disc once it has
been finalized.
Step 4
Playing
You can select the title you want to play in a
displayed menu and then immediately start
playback.
A DVD consists of sections called titles, and sub
sections called chapters.
During recording, a title is created between two
points where you start and stop recording. Chapters
will be created automatically when you finalize
recording on DVD-R / DVD-RW discs in Video
mode. The chapter’s length (interval between
chapters) varies according to the record mode.
Step 5
Editing a recorded disc
Editing on discs is easier than editing on conventional
video tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RW in VR mode)
With this recorder, you can create a new playlist on
the same disc and edit it without changing the original
recording.
10 - English
When using a DVD-R disc
You should finalize the disc to play it on a component
other than this recorder. You cannot edit or record on
the disc once it has been finalized.
R135-XAA-ENG-01-13
2006.3.11
9:54 AM
Page 11
Description
Getting Started
Front panel
1. POWER
Turns the recorder on and off.
2. AV 2 IN
Connect external equipment.
3. DV IN
Connects external digital equipment with a DV
jack. (such as a camcorder)
4. DISC TRAY
Opens to accept a disc.
5. P.SCAN
Selects the progressive scan mode.
6. OPEN/CLOSE
Opens and closes the disc tray.
7. DISPLAY
Displays the playing status, time, etc.
8. CH (
)
Select TV channels.
9. REC
Starts recording.
10. STOP
Stops disc playback.
11. PLAY/PAUSE
Plays a disc or pauses playback.
12. SEARCH
Go to the next title/chapter/track, or goes
back to the previous title/chapter/track.
Front Panel Display
1. Lights when a disc is loaded.
2. Lights in the record mode.
3. Lights to indicate the timer record mode.
4. Lights when a DVD-R/-RW/-RAM disc is
loaded.
5. Alpha/Numeric display.
6. Lights in the progressive scan mode.
English - 11
R135-XAA-ENG-01-13
2006.3.11
9:54 AM
Page 12
Getting Started
Rear Panel
1. ANT IN/ANT OUT (TO TV)
Connect antenna cables.
2. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optical
audio input jack.
3. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
audio input jack.
4. AV AUDIO OUT
Connect to the audio input of external equipment
using audio cables.
5. AV VIDEO OUT(good video quality)
Connects the input of external equipment using a
Video cable.
6. AV S-VIDEO OUT(better video quality)
Connects the input of external equipment using
an S-Video cable.
7. COMPONENT VIDEO OUT(best video quality)
Connect to equipment having Component video
input jacks.
8. AV 1 AUDIO IN
Connect the output of external equipment using
audio cables
9. AV 1 VIDEO IN
Connects the output of external equipment using
a video cable.
10. AV 1 S-VIDEO IN
Connects the output of external equipment using
an S-Video cable.
11. HDMI OUT
■
NOTE
The Antenna connection does not pass
audio/video signals. To watch a DVD on your
TV, you must connect audio/video cables.
Unpacking
Accessories
Check for the supplied accessories below.
Video/Audio Cable
(AC39-00073A)
12 - English
RF Cable for TV
(AC39-42001J)
Remote Control
(AK59-00055A)
Batteries for Remote
Control (AAA Size)
(AC43-12002H)
Instruction Manual
(AK68-01049A)
Quick Guide
(AK68-01051A)
R135-XAA-ENG-01-13
2006.3.11
9:54 AM
Page 13
10. MENU Button
Tour of the Remote Control
Brings up the DVD recorder’s setup menu.
11. ENTER/DIRECTION Buttons
29
27
30
1
16
17
2
(UP/DOWN and LEFT/RIGHT Buttons)
This button functions as a toggle switch.
12. TITLE LIST/DISC MENU Button
Use this to enter the View Recording list/Disc menu.
13. ANYKEY Button
Use this to view the status of the disc that is being played.
14. REC Button
Use to make a recording on DVD-RW/-R discs.
3
4
5
6
7
8
18
Use this to set the desired Recording time and picture quality.
(XP/SP/LP/EP)
19
20
9
10
11
15. REC MODE Button
16. SUBTITLE Button
Press this to switch the DVD’s subtitle language.
17. OPEN/CLOSE Button
To open and close the disc tray.
21
22
18. ANGLE Button
19. PLAY/PAUSE Button
Press to play/pause a disc or pause the recording.
20. CH Button
Use this to select a TV channel.
12
13
14
23
24
25
15
26
21. AUDIO Button
Use this to access various audio functions on a disc.
22. RETURN Button
23. PLAY LIST/TITLE MENU Button
Use this to return to the Title menu, or to view the recorded
Playlist.
24. CANCEL Button
25. TIMER Button
1. POWER Button
2. NUMBER Buttons
3. 100+ Button
Press this to select channel 100 or higher.
4. REVERSE/FORWARD SKIP Buttons
Press to skip a disc backwards or forwards.
5. REVERSE/FORWARD STEP Buttons
Press to play frame by frame.
6. REVERSE/FORWARD SEARCH Buttons
Press to search a disc backwards or forwards.
7. STOP Button
Press to directly enter the Timer Recording Mode menu.
26. INFO Button
This will display current setting or disc status.
27. REPEAT Button
Allows you to repeat a title, chapter, track or disc.
28. REPEAT A-B Button
Allows you to repeat a certain section.
29. ZOOM Button
30. INPUT SEL. Button
Selects line input signal in external input mode. (Tuner, AV1,
AV2 or DV)
Press to stop a disc or to stop the recording.
8. CM SKIP Button
The unit can be set to automatically skip a portion of the
program during playback of a DVD disc.
9. MARKER Button
Use this to bookmark or mark a position while playing a disc.
❋ This is a special remote control for the visually impaired, and has Braille points on the POWER(
PLAY( ) buttons.
), STOP(
) and
English - 13
Getting Started
28
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 14
Connecting &
Setting Up
Connecting &
Setting Up
Quick Overview
A Quick Overview presented in this guide will give
you enough information to start using the recorder.
This section involves various methods of
connecting the DVD Recorder to other external
components and setting required initial modes.
Step 1 : Connecting the Antenna Cable
†
Step 2 : Connecting the Video Cable
†
Step 3 : Connecting the Audio Cable
†
Step 4 : Connecting HDMI/ DVI to a TV
†
Step 5 : Connecting External Devices
†
Step 6 : Connecting the Power Cord
†
Step 7 : Preparing the Remote Control
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Step 1 : Connecting the Antenna Cable . . . . . . . .15
Step 2 : Connecting the Video Cable . . . . . . . . . .18
Step 3 : Connecting the Audio Cable . . . . . . . . . .21
Step 4 : Connecting HDMI/ DVI to a TV . . . . . . . .24
Step 5 : Connecting External Devices . . . . . . . . . .26
Step 6 : Connecting the Power Cord . . . . . . . . . . .29
Step 7 : Preparing the Remote Control . . . . . . . . .29
14 - English
• Note to CATV system installer: : This reminder is
provided to call CATV system installer’s attention to
Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I),
that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall
be connected to the grounding system of the
building as close to the point of cable entry as
practical.
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 15
Step 1: Connecting the Antenna Cable
There are several ways to connect your DVD Recorder. Select one of the Antenna connections on the following pages.
You can record non-scrambled channels by selecting the channel on the DVD Recorder. Also use this method if you
watch channels without cable box.
■
NOTE
The VHF/UHF ANT (RF) OUT jack of this
product sends only signals received through
the antenna. It does not output Audio/Video
signals. You must connect Audio/Video cables
to view Video from the unit.
(i.e. DVD playback)
English - 15
Connecting &
Setting Up
Antenna + DVD Recorder + TV : No Cable box
Connecting &
Setting Up
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 16
Antenna + Cable box + DVD Recorder + TV : Cable box with many scrambled
channels
You can record channels by selecting the channel on the cable box. You cannot record one channel while watching
another channel. Be sure that the cable box is turned on.
■
NOTE
16 - English
The VHF/UHF ANT (RF) OUT jack of this
product sends only signals received through
the antenna. It does not output Audio/Video
signals. You must connect Audio/Video cables
to view Video from the unit.
(i.e. DVD playback)
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 17
You can record non-scrambled channels by selecting the channel on the DVD Recorder. You cannot record scrambled
channels that require a cable box.
■
NOTE
The VHF/UHF ANT (RF) OUT jack of this
product sends only signals received through
the antenna. It does not output Audio/Video
signals. You must connect Audio/Video cables
to view Video from the unit.
(i.e. DVD playback)
English - 17
Connecting &
Setting Up
Antenna + DVD Recorder + Cable box + TV : Cable box with a few scrambled
channels
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 18
Step 2 : Connecting the Video Cable
Connecting &
Setting Up
There are several ways to connect your DVD Recorder. Select one of the video connections on the following pages.
You must use one of the following audio/video connections on this unit.
Connecting to a Video input jack
Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder and VIDEO(yellow) IN jack on
the TV (or AV amplifier).
• You will enjoy normal quality images.
• Connect audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on your TV(or AV amplifier).
(See pages 21 ~ 23)
18 - English
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 19
Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN jack on
your TV (or AV amplifier).
• You will enjoy high quality images. S-Video separates
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular
video input mode.
• Connect audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV(or AV amplifier).
(See pages 21 ~ 23)
■
NOTE
S-Video or Component video outputs are
available only if your TV supports S-Video
input or Component video input, respectively.
If S-Video or Component video output does
not work, check the TV connections and the
TV input selection settings.
English - 19
Connecting &
Setting Up
Connecting to an S-Video input jack
Connecting &
Setting Up
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 20
Connecting to Component video input jacks (Y,PB,PR)
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,PB,PR) jacks on
DVD Recorder and COMPONENT IN(Y,PB,PR) jacks
on your TV (or AV amplifier).
2. If the connected TV supports Progressive Scan,
press the P.SCAN button on the front of the DVD
Recorder to enjoy best quality video.
Pressing the P.SCAN button switches Progressive
(480p) / Interlace (480i) scan mode in turn.
■
NOTE
■
• You will enjoy best quality accurate color reproduction
images. Component video separates the picture
element into black and white(Y), blue(PB), red(PR)
signals to present clear and clean images.
• Connect audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV(or AV amplifier).
(See pages 21 ~ 23)
20 - English
■
Compared to standard interlaced video, progressive
scan doubles the amount of video lines fed to your
TV, resulting in a more stable, flicker-free, and clear
image than interlaced video. The progressive scan
video output jack is used in progressive output
mode. This is only available with TVs that support
progressive scan.
Progressive Scan Output (480p).
Not all high definition television sets are fully
compatible with this product. If the 480p progressive
scan picture is not satisfactory, press the P.SCAN
button on the unit to switch to the Interlace mode.
If there are questions regarding TV set compatibility
with this model, please contact our customer
service center at 1-800-SAMSUNG.
The Component jacks will not output video
resolutions above 480p. To view 720p and 1080i,
connect the DVD-R135 to your TV with the supplied
HDMI-HDMI cable. With HDMI connected, press the
P.SCAN button to alternate between all available
resolutions. (See page 42)
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 21
Step 3 : Connecting the Audio Cable
There are several ways to connect your DVD Recorder. Select one of the audio connections on the following pages.
Connecting &
Setting Up
Connecting to your TV
This connection will use your TV’s speakers.
English - 21
Connecting &
Setting Up
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 22
Connecting to a stereo amplifier with analog input jacks
If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks.
22 - English
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 23
If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy Dolby
Digital or DTS sound, you will need to set up the audio settings. (See pages 34~35)
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
English - 23
Connecting &
Setting Up
Connecting to an AV amplifier with a digital input jack
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 24
Step 4 : Connecting HDMI/DVI to a TV
Connecting &
Setting Up
If your TV has a HDMI/DVI input, connect HDMI/DVI cable to a TV. You will enjoy the best quality images and sounds.
Connecting to a TV with HDMI Jack
Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of
your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV
screen.
HDMI OUT
■
Caution
■
To watch through the HDMI output, set the digital
audio output to PCM.(See page 34~35)
Depending on the HDMI device(TV/HDMI Receiver)
you use, audio may not be supported. If TV does
not support Dolby digital/DTS, Audio output is not
available when you set Digital output as Bitstream
or select DTS On in Audio setup menu. In this case,
set the digital audio ouput to PCM or DTS Off.
24 - English
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 25
Connecting to a TV with DVI Jack
Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder to the DVI
IN terminal of your TV.
Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD Recorder to the
AUDIO (red and white) IN terminals of your TV. Turn on the DVD Recorder and TV.
Press the input selector on your TV remote control until the DVI signal from the DVD Recorder appears on your TV
screen.
Connecting &
Setting Up
HDMI OUT
■
NOTE
■
■
To change HDMI output resolution, see page 42.
HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of
video and audio data with just a single connector. Since
HDMI is based on DVI, it is completely compatible with
DVI. The only difference between HDMI and DVI is that
HDMI supports multi-channel audio.
Using HDMI, the DVD recorder transmits a digital video
and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
HDMI connection description
HDMI connector - Both uncompressed video data and
digital audio data (LPCM or Bit Stream data).
- Though the DVD recorder uses a HDMI cable, the DVD
recorder outputs only a pure digital signal to the TV.
- If TV does not support HDCP (Highbandwidth Digital
Content Protection), snow noise appears on the screen.
■
■
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal.
However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter
(in the DVD Recorder) or an analog-to-digital converter (in
the TV) is required. During this conversion, the picture
quality is degraded due to noise and signal loss. HDMI
technology is superior because it requires no D/A
conversion and is a pure digital signal from the DVD
recorder to your TV.
What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a
system for protecting DVD content outputted via HDMI
from being copied. It provides a secure digital link between
a video source (PC, DVD. etc) and a display device (TV,
projector. etc). Content is encrypted at the source device
to prevent unauthorized copies from being made.
English - 25
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 26
Step 5 : Connecting External Devices
Connecting &
Setting Up
This allows you to connect your DVD Recorder to other external devices and view or record their outputs.
Connecting a VCR, Set-Top Box(STB) or DVD Player to the AV 1 IN or S-VIDEO IN
jacks
Connecting a VCR or external device to the AV 1 IN jacks of the DVD Recorder.
You can record from connected equipment (VCR, STB or DVD Player).
26 - English
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 27
You can also use the AV 2 IN jacks on the front panel of the DVD Recorder. You can record from connected
equipment, such as a camcorder.
When an input source is inserted into AV 2 while watching TV, the input will be switched to AV 2 automatically.
AUDIO/VIDEO
Cable
Camcorder
English - 27
Connecting &
Setting Up
Connecting a Camcorder to the AV 2 IN jacks
Connecting &
Setting Up
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 28
Connecting a Camcorder to the DV IN jack
If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder.
DV Cable
(not supplied)
Camcorder
■
NOTE
■
28 - English
(See page 50)
If the input is not selected automatically, press the
INPUT SEL. button on the remote control to select
the DV input.
Check your camcorder's owner's manual to see
how to use the camcorder in this mode.
R135-XAA-ENG-14-29
2006.3.11
9:54 AM
Page 29
Step 6 : Connecting the
Power Cord
After all connections are complete, plug the power cord
in the wall outlet.
Connecting &
Setting Up
“Auto” appears in the panel display. This means
that the current time is being set automatically
(Auto Program) through the antenna under
connection and also the channel is being set.
The setup may take a few minutes.
When the DVD Recorder operates normally, the current time
is automatically set and displayed in the front panel display.
■
NOTE
After the current time is set automatically, the
recorder will perform Auto Channel Memory for
about 3 minutes. If power is on before finishing
the Auto Channel Memory process, Auto
Channel Memory will stop.
In this case, do Auto Channel Memory from
MENU(see page 33).
Step 7 : Preparing the
Remote Control
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Replace the battery cover.
If the remote control does not operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
English - 29
R135-XAA-ENG-30-44
2006.3.11
9:55 AM
Page 30
System
Setup
Using the Setup Menu
For ease of use, we recommend that you perform the initial
setup before using the product.
1
With the unit in Stop mode/No Disc mode, press the
MENU button on the remote control.
Menu items differ depending on the disc type.
DVD-Recorder
Timer Record
System Setup
No Disc
Timer Rec.
Timer Record
√
Setup
Scheduled Record List
√
MOVE
2
ENTER
RETURN
EXIT
Select Setup using the …† buttons, then press the
ENTER or √ button.
Setup menu will be displayed.
DVD-Recorder
Setup
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
Using the Setup Menu........................................................30
Initial Setup..........................................................................31
System Setting ....................................................................37
Language Setting................................................................40
Video (Display) Setting .......................................................41
Parental Control ..................................................................42
30 - English
ENTER
√
RETURN
EXIT
• System
Setup of the General Options.
- CM Skip Time, EP Mode Time, Chapter Creator, Quick Recording
• Clock Set
- Auto Clock Set, Manual Clock Set
• Channel Set
- Antenna/ Cable TV, Auto Channel Memory, Chanel Add/ Delete
• Language
Setup of the Language Options.
- Audio, Subtitle, Disc Menu, On-Screen Menu
• Audio
Setup of the Audio Options
- Digital Output , DTS, Dynamic Compression
• Video
Setup of the Display Options. Use to select which type of
screen you want to watch and several display options.
- TV Aspect, Input Level, Black Level, 3D Noise Reduction
• Parental Control
Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those
with violence, adult subject matter, etc.
- Password, Rating Level,Change Password
R135-XAA-ENG-30-44
2006.3.11
9:55 AM
Page 31
Initial Setup
Auto Clock Set
1
With the unit in Stop mode/No Disc mode, press the
MENU button.
If you connected an external Audio System, turn on your
Audio System and select AUX, CD or DVD.
The OSD (On-Screen Display) displayed on the screen
may vary depending on conditions such as the disc type
and whether the disc has been inserted or not.
DVD-Recorder
Timer Record
No Disc
Timer Rec. Timer Record
√
Setup
√
Scheduled Record List
1. OSD Language Setup
MOVE
After plugging in the recorder, the first time you press the
POWER button, the screen shown below appears.
DVD-Recorder
Press the POWER button.
Setup
No Disc
Timer Rec. System
Setup
Clock Set
Touche 2 pour Français
Pulse 3 para Español
√
Channel Set
√
Language
√
Audio
√
Video
√
MOVE
3
Press a number button to select the language.
NOTE
√
Parental Control
MACROVISION DS01
ENTER
√
RETURN
EXIT
Select Clock Set using the …† buttons, then press
the ENTER or √ button.
Clock Set menu will be displayed.
DVD-Recorder
■
EXIT
Select Setup using the …† buttons, then press the
ENTER or √ button.
Press 1 for English
2
RETURN
Clock Set
No Disc
If the language for the startup screen is not set,
the settings may change whenever you turn the
power on or off. Therefore, make sure that you
select the language you want to use.
Timer Rec.
Auto Clock Set
√
Setup
Manual Clock Set
√
2. Clock Set
MOVE
This menu is used to set the current time. You need to
set the time first to use timer recording.
You must have the antenna/cable connected to
set the Auto Clock. See pages 15~17 for
Antenna connections(Method 1, 2 and 3).
Method 1 or 3
If you have the antenna connected via Method 1 or 3 on
pages 15,17, the DVD Recorder automatically sets the
clock by searching for a channel that carries a time
signal and sets your time zone and daylight saving(if
applicable).
4
ENTER
RETURN
EXIT
Select Auto Clock Set using the …† buttons, then
press the ENTER or √ button.
■
The Menus are slightly different depending on
whether a disc is inserted or not. The menus
described on the next few pages are with no
disc in the unit.
■
The menus are not available during playback
or recording.
NOTE
Method 2
If you have the antenna connected via Method 2 on
page 16, you have to set the clock manually.
See “Manual Clock set” on pages 32.
English - 31
System Setup
1
2
ENTER
R135-XAA-ENG-30-44
5
2006.3.11
9:55 AM
Page 32
Select the sub menu(Clock Data CH, Time Zone
or Daylight Saving) using the …† buttons, then
press the ENTER or √ button.
DVD-Recorder
Manual Clock Set
If your clock cannot be set automatically, set the clock
manually.
Auto Clock Set
No Disc
Timer Rec.
Clock Data CH
: Automatic
√
Setup
Time Zone
: Automatic
√
Daylight Saving
: Automatic
√
To setup, follow steps 1 to 3 in page 31.
4
MOVE
ENTER
RETURN
Select Manual Clock Set using the …† buttons,
then press the ENTER or √ button.
EXIT
DVD-Recorder
Clock Data CH
Clock set
No Disc
Select a channel that carries a time signal using the
…† buttons then press the ENTER button.
Timer Rec.
Auto Clock Set
√
Setup
Manual Clock Set
√
System Setup
• Select Auto to set the clock data channel automatically.
DVD-Recorder
Clock Data CH
No Disc
MOVE
ENTER
RETURN
EXIT
…
Timer Rec.
Select channel :
Setup
Auto
†
5
MOVE
ENTER
RETURN
EXIT
Time Zone
Select the time zone of your area using the …† buttons
then press the ENTER or √ button.
• Select Automatic to set the time zone automatically.
Select the current date and current time (Month,
Day, Year, Hour, Minute and AM/PM) using the
…†œ √ or number buttons and then press the
ENTER button.
When the current time is stored in memory and then
the set is powered off, the current time will appear in
the front panel display.
DVD-Recorder
Manual Clock Set
No Disc
Timer Rec.
DVD-Recorder
Auto Clock Set
Setup
No Disc
Clock Data CH
Setup
Time Zone
Daylight Saving
MOVE
ENTER
01
Automatic
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Year
Hour
01
2006
12
Minute AM/PM
MOVE
RETURN
EXIT
• Select Automatic to set the daylight saving
automatically.
DVD-Recorder
Auto Clock Set
No Disc
Timer Rec.
Clock Data CH
: Automatic
√
Setup
Time Zone
: Automatic
√
Daylight Saving
ENTER
Automatic
Yes
No
RETURN
00
AM
SUN
Select Yes, No or Automatic using the …† buttons,
then press the ENTER or √ button.
32 - English
Day
†
Daylight Saving
MOVE
Month
…
Timer Rec.
EXIT
ENTER
RETURN
EXIT
…† : Sets the value
You can set the value using the number (0~9)
buttons.
œ √: Moves to items
R135-XAA-ENG-30-44
2006.3.11
9:56 AM
Page 33
3. Channel Set
5
Auto Channel Memory
Select Antenna or Cable TV(depending on the
hookup you’ve selected) using the …† buttons,
then press the ENTER or √ button.
If you have the antenna connected via Method 1 or 3 on
pages 15, 17, select Antenna. Otherwise, select Cable
TV.
You can set the Antenna/Cable TV settings automatically.
DVD-Recorder
Channel Set
No Disc
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
DVD-Recorder
Timer Rec. Antenna/Cable TV
Setup
Auto Channel Memory
Antenna
Cable TV
Channel Add/Delete
√
√
Timer Record
No Disc
Timer Rec.
Timer Record
√
Setup
Scheduled Record List
√
2
ENTER
RETURN
EXIT
6
ENTER
RETURN
EXIT
Select Auto Channel Memory using the …†
buttons, then press the ENTER or √ button.
Auto Channel Memory will be displayed.
The memorizing process may take a few minutes.
Select Setup using the …† buttons, then press
the ENTER or √ button.
Auto Channel Memory
DVD-Recorder
Setup
Total channel numbers : 04/125
Saved channel :
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
3
ENTER
5%
Stop
√
RETURN
EXIT
Select Channel Set using the …† buttons, then
press the ENTER or √ button.
DVD-Recorder
Setup
■
NOTE
If you want to stop Auto Channel Memory,
press the ENTER button.
The confirmation message will be displayed.
Select YES using the œ √ buttons, then press
the ENTER button
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
4
ENTER
√
RETURN
EXIT
Select Antenna/Cable TV(Signal Source) using the
…† buttons, then press the ENTER or √ button.
DVD-Recorder
Channel Set
No Disc
Timer Rec.
Antenna/Cable TV : Antenna
√
Setup
Auto Channel Memory
√
Channel Add/Delete
√
MOVE
ENTER
RETURN
EXIT
English - 33
System Setup
MOVE
MOVE
R135-XAA-ENG-30-44
2006.3.11
10:46 AM
Page 34
4. Setting Up the Audio Options
Manual Channel Set
Manual Channel Set can be used after you have
performed Auto Channel Memory.
Use the Manual Channel Setting to delete unnecessary
channels after finishing the Auto Channel Memory
process.
To setup, follow steps 1 to 3 in page 33.
4
You can connect the DVD-R135 to an external audio
amplifier or a Home Theater system.
Allows you to setup the audio device and sound status
settings depending on the audio system in use.
1
Select Channel Add/Delete using the …†
buttons, then press the ENTER or √ button.
DVD-Recorder
With the unit in Stop mode/No Disc mode, press
the MENU button on the remote control.
DVD-Recorder
Timer Record
No Disc
Timer Rec.
Timer Record
√
Setup
Scheduled Record List
√
Channel Set
System Setup
No Disc
Timer Rec.
Antenna/Cable TV : Antenna
√
Setup
Auto Channel Memory
√
Channel Add/Delete
√
MOVE
MOVE
5
ENTER
RETURN
ENTER
RETURN
EXIT
EXIT
Select the channels you want to add or delete on
the “Select channel” screen using the …† or
number buttons. Then, press the ENTER button.
2
Select Setup using the …† buttons, then press
the ENTER or √ button.
DVD-Recorder
Setup
No Disc
DVD-Recorder
Channel Add/Delete
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Timer Rec.
Setup
Select channel :
Add
9
Delete
MOVE
0~9 NUMBER
ENTER
RETURN
ENTER
RETURN
EXIT
• Using CH(
) buttons for channel selection
allows the user to add/delete one channel at a time.
• Using …† buttons for channel selection jumps to
the next channel memorized in Auto Channel
Memory.
3
Select Audio using the …† buttons, then press
the ENTER or √ button.
DVD-Recorder
Setup
No Disc
Timer Rec. System
Setup
6
Select Add or Delete using the œ √ buttons,then
press the ENTER button.
• The message 'Channel is added.' or 'Channel is
deleted.' will be displayed in the center of the
screen.
• Continue to add or delete as many channels as you
want to memorize or delete. This can be used to
add channels not stored automatically due to weak
signal strength.
• Press the RETURN button to return to the previous
menu. Press the MENU button to exit the menu.
34 - English
EXIT
√
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
ENTER
√
RETURN
EXIT
R135-XAA-ENG-30-44
2006.3.11
9:56 AM
Page 35
Dynamic Compression
4
Select the sub menu(Digital Output, DTS,
Dynamic Compression) using the …† buttons,
then press the ENTER or √ button.
Select the item that matches the audio
connection you’ve selected on pages
21~23(Method 1, 2 and 3).
This is only active when a Dolby Digital signal is detected.
• On : When movie soundtracks are played at low volume
or from small speakers, the system can apply
appropriate compression to make low-level content more
intelligible and prevent dramatic passages from getting
too loud.
• Off : You can enjoy the movie with standard Dynamic
Range.
DVD-Recorder
DVD-Recorder
Audio
No Disc
Audio
No Disc
Timer Rec.
Digital Output
: PCM
√
Setup
DTS
: Off
√
Timer Rec.
Digital Output
: PCM
√
Setup
DTS
: Off
√
Dynamic Compression OnOff
√
On
Dynamic Compression: On
MOVE
MOVE
ENTER
RETURN
RETURN
EXIT
EXIT
Select PCM if your amplifier system is stereo and/or
Dolby Prologic.
5
• Bitstream : Outputs Bitstream (original format) such as
Dolby or DTS.
Select Bitstream if your amplifier system has multi
channel digital audio surround decoding (Dolby Digital
and/or DTS).
■
NOTE
Audio
Select the desired item(PCM, Bitstream, DTSOff, DTS-On, Dynamic Compression-Off or
Dynamic Compression-On) using the …†
buttons
Then press the ENTER or √ button.
Press the RETURN or œ button to return to
the previous menu.
Press the MENU button to exit the menu.
No Disc
Timer Rec.
Digital Output
: PCM
PCM
√
Setup
DTS
Bitstream
: Off
√
Dynamic Compression: On
MOVE
ENTER
RETURN
√
EXIT
DTS
• On : Outputs DTS bitstream. (via Digital Audio
Output)
Select DTS when connecting to a digital amp with
DTS decoder.
• Off : Doesn’t output DTS bitstream (original format).
• When DTS soundtrack is played, sound is not output
from Analog Audio Output.
DVD-Recorder
Audio
No Disc
Timer Rec. Digital Output
Setup
MOVE
: PCM
√
: OffOff
√
Dynamic Compression: OnOn
√
DTS
ENTER
RETURN
EXIT
English - 35
System Setup
Digital Output
• PCM : Converts to PCM(2CH) 48kHz audio.
DVD-Recorder
ENTER
√
R135-XAA-ENG-30-44
2006.3.11
9:56 AM
Page 36
5. Setting Up the TV Aspect
This allows you to set up the TV screen settings.
5
Select the desired item(4:3 Letter Box, 4:3 PanScan or 16:9 Wide) using the …† buttons.
Then press the ENTER or √ button.
DVD-Recorder
Video
No Disc
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
DVD-Recorder
Timer Rec.
TV Aspect
: 16:9
4:3 Wide
Letter Box √
Setup
Input Level
4:3 Pan-Scan
: Darker
√
Black Level
16:9
Wide
: 7.5
IRE
√
3D Noise Reduction
: Off
√
HDMI/DVI Resolution
: 480P
√
Timer Record
No Disc
DivX(R) Registration
Timer Rec. Timer Record
√
Setup
√
Scheduled Record List
System Setup
MOVE
2
ENTER
RETURN
EXIT
MOVE
ENTER
√
RETURN
EXIT
If you have a 4:3 standard TV
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
Select Setup using the …† buttons, then press
the ENTER or √ button.
DVD-Recorder
Setup
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
3
ENTER
√
RETURN
EXIT
Select Video using the …† buttons, then press
the ENTER or √ button.
DVD-Recorder
• 4:3 Pan-Scan : Select this for a conventional size TV
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
Setup
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
4
ENTER
√
RETURN
EXIT
Select TV Aspect using the …† buttons, then
press the ENTER or √ button.
DVD-Recorder
Video
No Disc
Timer Rec.
TV Aspect
: 16:9 Wide
√
Setup
Input Level
: Darker
√
Black Level
: 7.5 IRE
√
3D Noise Reduction
: Off
√
HDMI/DVI Resolution
: 480P
√
DivX(R) Registration
MOVE
36 - English
ENTER
√
RETURN
EXIT
If you have a wide screen TV or 4:3 standard TV
with a wide-screen mode
• 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
R135-XAA-ENG-30-44
2006.3.11
9:56 AM
Page 37
4
System Setting
Select CM Skip Time using the …† buttons, then
press the ENTER or √ button.
CM Skip Time will be displayed.
DVD-Recorder
System
DVD-RW(VR)
Title List
CM Skip Time
: 15 Sec
√
Playlist
EP Mode Time
: 6 Hours
√
Chapter Creator
: Off
√
Quick Recording
: Off
√
Disc Manager
Timer Rec.
Setup
CM Skip Time Setting
When a program recorded on a DVD-RAM, a DVD-RW,
or a DVD-R is played, the unit can be set to
automatically skip a portion of the program
corresponding to a CM(commercial) Skip Time set by
the user.
MOVE
5
ENTER
RETURN
EXIT
Select the desired time using the …† buttons, then
press the ENTER or √ button.
DVD-Recorder
System
DVD-RW(VR)
Title List
CM Skip Time
:1515Sec
Sec
√
Playlist
EP Mode Time
√
Chapter Creator
:306 Sec
Hours
Sec
:60Off
Quick Recording
: Off
√
Disc Manager
√
Timer Rec.
DVD-Recorder
Title List
Setup
DVD-RW(VR)
Title List
Title List
√
MOVE
Playlist
ENTER
RETURN
EXIT
Disc Manager
Timer Rec.
6
Setup
MOVE
ENTER
RETURN
EXIT
If you press the CM SKIP button during playback, the
section corresponding to the set time is skipped, and
then the next section is played.
CM SKIP
2
Select Setup using the …† buttons, then press the
ENTER or √ button.
You can't use the Setup functions while playing a disc.
DVD-Recorder
Setup
DVD-RW(VR)
Title List
System
√
Playlist
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Disc Manager
Timer Rec.
Setup
■
NOTE
MOVE
3
ENTER
RETURN
EXIT
Select System using the …† buttons, then press the
ENTER or √ button.
System menu will be displayed.
DVD-Recorder
System
■
Title List
CM Skip Time
Playlist
: 15 Sec
√
EP Mode Time
: 6 Hours
√
Chapter Creator
: Off
√
Quick Recording
: Off
√
Timer Rec.
■
Setup
MOVE
■
■
DVD-RW(VR)
Disc Manager
■
ENTER
RETURN
EXIT
■
CM Skip can be performed only during
normal playback.
When the time set is less than a remaining
time of a current title: The next title is
played from the beginning.
When the time set is less than a remaining
time of a playlist, the next scene is played.
CM Skip does not work in a still picture
mode.
When a set time is less than a remaining
time of a scene, a last title, or a last track
that is displayed currently, a prohibition
mark appears.
CM Skip releases Repeat (including
Repeat A-B, Chapter, and Title).
CM Skip may not operate with some DVDVideo discs.
English - 37
System Setup
1
With a disc inserted and the unit in Stop mode, press
the MENU button on the remote control.
R135-XAA-ENG-30-44
2006.3.11
9:56 AM
Page 38
5
EP Mode Time Setting
You can set the EP (Extended Play) mode’s time to 6 or
8 hours.
1
Select the desired time using the …† buttons, then
press the ENTER or √ button.
DVD-Recorder
System
DVD-RW(VR)
With a disc inserted and the unit in Stop mode, press
the MENU button on the remote control.
Title List
CM Skip Time
: 15 Sec
√
Playlist
EP Mode Time
√
Chapter Creator
: 66Hours
Hours
Hours
: 8Off
Quick Recording
: Off
√
Disc Manager
√
Timer Rec.
Setup
DVD-Recorder
Title List
DVD-RW(VR)
Title List
MOVE
Title List
ENTER
RETURN
EXIT
√
Playlist
Disc Manager
Timer Rec.
Automatic Chapter Creation
Setup
System Setup
MOVE
2
ENTER
RETURN
EXIT
Select Setup using the …† buttons, then press the
ENTER or √ button.
You can't use the Setup functions while playing a disc.
This function works for DVD-RW (Video) and DVD-R
discs only.
1
With a disc inserted and the unit in Stop mode, press
the MENU button on the remote control.
DVD-Recorder
DVD-Recorder
Setup
DVD-RW(VR)
Title List
Title List
System
√
Playlist
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Disc Manager
Timer Rec.
Setup
Parental Control
Title List
3
ENTER
√
Disc Manager
Timer Rec.
Setup
√
MOVE
MOVE
Title List
DVD-RW(V)
RETURN
ENTER
RETURN
Select System using the …† buttons, then press the
ENTER or √ button.
2
Select Setup using the …† buttons, then press the
ENTER or √ button.
You can't use the Setup functions while playing a disc.
System menu will be displayed.
DVD-Recorder
DVD-Recorder
Setup
DVD-RW(V)
System
DVD-RW(VR)
Title List
System
√
Title List
CM Skip Time
: 15 Sec
√
Disc Manager Clock Set
√
Playlist
EP Mode Time
: 6 Hours
√
√
Chapter Creator
: Off
√
Quick Recording
: Off
√
Timer Rec. Channel Set
Language
Setup
Audio
Disc Manager
Timer Rec.
√
√
Parental Control
MOVE
MOVE
ENTER
RETURN
√
RETURN
EXIT
3
Select System using the …† buttons, then press the
ENTER or √ button.
System menu will be displayed.
EP Mode Time will be displayed.
DVD-Recorder
ENTER
EXIT
Select EP Mode Time using the …† buttons, then
press the ENTER or √ button.
System
DVD-Recorder
System
DVD-RW(V)
DVD-RW(VR)
Title List
CM Skip Time
: 15 Sec
√
Title List
Playlist
EP Mode Time
: 6 Hours
√
Disc Manager EP Mode Time
Chapter Creator
: Off
√
Timer Rec.
Quick Recording
: Off
√
Disc Manager
√
Video
Setup
4
EXIT
EXIT
Timer Rec.
CM Skip Time
: 15 Sec
√
: 6 Hours
√
Chapter Creator
: Off
√
Quick Recording
: Off
√
Setup
Setup
MOVE
38 - English
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
R135-XAA-ENG-30-44
4
2006.3.11
9:56 AM
Page 39
Select Chapter Creator using the …† buttons, then
press the ENTER or √ button.
Chapter Creator items will be displayed.
DVD-Recorder
System
DVD-RW(V)
Title List
CM Skip Time
: 15 Sec
√
: 6 Hours
√
Chapter Creator
: Off
√
Quick Recording
: Off
√
Disc Manager EP Mode Time
Timer Rec.
Setup
MOVE
ENTER
RETURN
Quick Recording Setting
It takes about 10 seconds for a disc to load (initialize)
every time you turn on the unit. To bypass this
initialization process, you can set the Quick Recording
feature to On. This enables you to record immediately
without having to wait for the disc to load.
1
With a disc inserted and the unit in Stop mode, press
the MENU button on the remote control.
DVD-Recorder
EXIT
Title List
DVD-RW(VR)
Title List
Title List
√
Playlist
Disc Manager
5
DVD-Recorder
System
Timer Rec.
Setup
MOVE
2
CM Skip Time
: 60 Sec
√
Disc Manager EP Mode Time
: 6 Hours
√
Timer Rec. Chapter Creator
Quick Recording
Setup
: Off
:On
On
√
DVD-Recorder
RETURN
Setup
DVD-RW(VR)
Title List
System
√
Playlist
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
√
Timer Rec.
ENTER
Setup
EXIT
Parental Control
MOVE
■
NOTE
■
Set the chapter creator to on and then
start recording. Stopping the recording will
automatically create a chapter menu.
This function only works for normal recording.
3
To display the created chapters, finalize
the disc and then press the DISC MENU
button. The chapters menu appears.
ENTER
√
RETURN
EXIT
Select System using the …† buttons, then press the
ENTER or √ button.
System menu will be displayed.
- After the recording has begun, the “Do you
want to create the chapter menu after this
recording?” message appears for 10 seconds.
Select Yes or No.
- Selecting Yes will create a new chapter menu
while selecting No will not.
- A new chapter is created according to the
selected recording mode. A chapter will be
about 5 minutes long in XP and SP, and about
15 minutes long in LP and EP mode.
■
EXIT
Select Setup using the …† buttons, then press the
ENTER or √ button.
Disc Manager
MOVE
RETURN
You can't use the Setup functions while playing a disc.
DVD-RW(V)
Title List
ENTER
DVD-Recorder
System
DVD-RW(VR)
Title List
CM Skip Time
: 15 Sec
√
Playlist
EP Mode Time
: 6 Hours
√
Chapter Creator
: Off
√
Quick Recording
: Off
√
Disc Manager
Timer Rec.
Setup
MOVE
4
ENTER
RETURN
EXIT
Select Quick Recording using the …† buttons, then
press the ENTER or √ button.
Quick Recording menu will be displayed.
■
CAUTION
The Automatic Chapter Creation function
does not work during Timer Recording or
when you turn the power off.
DVD-Recorder
System
DVD-RW(VR)
Title List
CM Skip Time
: 15 Sec
√
Playlist
EP Mode Time
: 6 Hours
√
Chapter Creator
: Off
√
Quick Recording
: Off
√
Disc Manager
Timer Rec.
Setup
MOVE
ENTER
RETURN
EXIT
English - 39
System Setup
Select On using the …† buttons, then press the
ENTER button.
• Off : Select this option when you do not want to create
chapters.
• On : Select this option when you want to create
chapters.
R135-XAA-ENG-30-44
5
2006.3.11
9:56 AM
Page 40
Select On using the …† buttons, then press the
ENTER or √ button.
3
Select Language using the …† buttons, then press the
ENTER or √ button.
Language setup menu will be displayed.
DVD-Recorder
System
DVD-Recorder
DVD-RW(VR)
Title List
CM Skip Time
: 15 Sec
√
Playlist
EP Mode Time
: 6 Hours
√
Chapter Creator
: Off
√
Quick Recording
: Off
On
√
Disc Manager
Setup
No Disc
Timer Rec.
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
On
Setup
Parental Control
MOVE
■
System Setup
NOTE
ENTER
RETURN
EXIT
MOVE
The Quick Recording is set to Off as
default.
With the unit in Stop mode/No Disc mode, press the
MENU button on the remote control.
Language
Timer Rec.
Audio
: Original
√
Setup
Subtitle
: Automatic
√
Disc Menu
: English
√
On-Screen Menu : English
√
4
ENTER
RETURN
using the …† buttons.
• Audio : For the disc audio language.
• Subtitle : For the disc subtitles.
• Disc Menu : For the disc menu contained on the disc.
• On-Screen Menu : For the unit menu of your DVD recorder.
5
Select the desired language using the …† buttons, then
press the ENTER or √ button.
Timer Record
Timer Record
√
Setup
Scheduled Record List
√
Timer Rec.
Audio
Setup
Subtitle
MOVE
MOVE
2
ENTER
RETURN
■
NOTE
■
Setup
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
40 - English
ENTER
√
RETURN
√
: Original
Original
English
: Automatic
Français
Disc Menu
: English
Deutsch
On-Screen Menu : English
Español
Italiano
Nederlands
Korean
ENTER
RETURN
√
√
√
EXIT
EXIT
Select Setup using the …† buttons, then press the
ENTER or √ button
DVD-Recorder
Language
No Disc
No Disc
Timer Rec.
EXIT
Select the sub menu(Audio, Subtitle, Disc Menu,
On-Screen Menu) and press the ENTER or √ button
DVD-Recorder
DVD-Recorder
EXIT
No Disc
MOVE
If you set the On-Screen menu, Disc menu, Audio and
Subtitle language in advance, they will come up
automatically every time you watch a movie.
If the selected language is not recorded on the disc, the
original pre-recorded language is selected.
√
RETURN
DVD-Recorder
Language Setting
1
ENTER
EXIT
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
The selected language will only appear if it
is supported on the disc.
R135-XAA-ENG-30-44
2006.3.11
12:40 PM
Page 41
Video (Display) Setting
4
Select the sub menu(TV Aspect,Input Level,
Black Level, 3D Noise Reduction, HDMI/DVI
Resolution or DivX(R) Registration) using the …†
buttons, then press the ENTER or √ button.
TV Aspect: see page 36
Input Level: Adjusts the level of the input signal.
This allows you to set up the TV screen settings.
DVD-Recorder
1
Video
No Disc
With the unit in Stop mode/No Disc mode, press the
MENU button on the remote control.
Timer Rec. TV Aspect
: 16:9 Wide
Black Level
DVD-Recorder
Timer Record
No Disc
√
Darker
: Darker
Lighter
: 7.5 IRE
Input Level
Setup
√
√
3D Noise Reduction
: Off
√
HDMI/DVI Resolution
: 480P
√
DivX(R) Registration
Timer Rec. Timer Record
√
Setup
√
Scheduled Record List
MOVE
√
ENTER
RETURN
EXIT
MOVE
2
ENTER
RETURN
EXIT
Select Setup using the …† buttons, then press the
ENTER or √ button.
• Lighter : If you feel the screen is too dark and you
want to make the screen lighter.
Black Level: Adjusts the black level of the screen.
DVD-Recorder
DVD-Recorder
Setup
Video
No Disc
No Disc
Timer Rec.
TV Aspect
: 16:9 Wide
√
Setup
Input Level
: Darker
√
√
Black Level
0 :IRE
7.5 IRE
√
Channel Set
√
3D Noise Reduction
7.5: Off
IRE
√
Language
√
HDMI/DVI Resolution
Audio
√
Video
√
Timer Rec.
System
√
Setup
Clock Set
Parental Control
ENTER
√
DivX(R) Registration
√
√
MOVE
MOVE
: 480P
RETURN
ENTER
RETURN
EXIT
EXIT
• 0 IRE : Select this when you want to make the screen
darker.
3
Select Video using the …† buttons, then press the
ENTER or √ button.
Video option menu will be displayed.
• 7.5 IRE : Select this when you want to make the
screen lighter.
■
DVD-Recorder
Setup
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
√
NOTE
Black level function is not available in the
progressive scan mode.
3D Noise Reduction (motion adaptive noise
reduction)
DVD-Recorder
MOVE
ENTER
RETURN
Video
EXIT
No Disc
DVD-Recorder
Video
Timer Rec.
TV Aspect
: 16:9 Wide
√
Setup
Input Level
: Darker
√
Black Level
: 7.5 IRE
√
No Disc
Setup
Off: Off
HDMI/DVI Resolution On: 480P
√
DivX(R) Registration
√
3D Noise Reduction
Timer Rec. TV Aspect
: 16:9 Wide
√
Input Level
: Darker
√
Black Level
: 7.5 IRE
√
3D Noise Reduction
: Off
√
HDMI/DVI Resolution
: 480P
√
DivX(R) Registration
MOVE
ENTER
RETURN
√
EXIT
√
• On : Select to remove noise from the screen.
MOVE
ENTER
RETURN
EXIT
• Off : Normal
English - 41
System Setup
• Darker : If you feel the screen is too light and you
want to make the screen darker.
01049A-R135-XAA-ENG-30-44
2006.3.14
10:3 AM
Page 42
HDMI/DVI Resolution
This setting is used when the unit is connected by
HDMI or DVI with Display devices (TV, projector, etc).
DVD-Recorder
Parental Control
Video
No Disc
Timer Rec.
TV Aspect
: 16:9 Wide
√
Setup
Input Level
: Darker
√
Black Level
: 7.5 IRE
√
3D Noise Reduction
: Off
√
HDMI/DVI Resolution
480P
: 480P
720P
DivX(R) Registration
√
√
1080i
MOVE
ENTER
RETURN
The Parental Control function works in conjunction with
DVDs that have been assigned a rating - which helps you
control the types of DVDs that your family watches. There
are up to 8 rating levels on a disc.
EXIT
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
Output selection
1
With the unit in Stop mode/No Disc mode, press the
MENU button on the remote control.
System Setup
DVD-Recorder
Connect the DVD-R135 to your TV via HDMI or
DVI. Set your TV's input to HDMI or DVI.
• Press the P.SCAN button while the unit is in stop
mode to select the output resolution.
- If your TV is connected the HDMI or DVI cable, the
output resolution mode changes in the following
sequence each time you press the P.SCAN button:
➞ 480p ➞ 720p ➞ 1080i
- If your TV is connected the AV or component
cables (without HDMI/DVI cable), the output
resolution mode toggles 480p/480i in turn.
Timer Record
No Disc
Timer Rec.
Timer Record
√
Setup
Scheduled Record List
√
MOVE
2
ENTER
RETURN
Select Setup using the …† buttons, then press the
ENTER or √ button.
DVD-Recorder
■
NOTE
Even if HDMI/DVI cable is connected to
your TV, the AV connection outputs only
480i and the component connection
outputs only 480p irrespective of the on
screen display.
Setup
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
DivX(R) Registration
Please use the Registration code to register your DVD
Recorder with the DivX(R) Video On Demand format.
To learn more, visit www.divx.com/vod
5
Use the …† buttons to select the desired item. Then
press the ENTER or √ button.
■
NOTE
■
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
IRE: Short for the Institute of Radio
Engineers. An IRE unit is a relative unit of
measure equaling 1/140th of the peak-topeak (p-p) video amplitude.
42 - English
EXIT
MOVE
3
ENTER
√
RETURN
EXIT
Select Parental Control using the …† buttons, then
press the ENTER or √ button.
DVD-Recorder
Setup
No Disc
Timer Rec.
System
√
Setup
Clock Set
√
Channel Set
√
Language
√
Audio
√
Video
√
Parental Control
MOVE
ENTER
√
RETURN
EXIT
R135-XAA-ENG-30-44
4
2006.3.11
9:56 AM
Page 43
The first time the Parental Control is accessed, the
‘Create the Password’ message will be displayed.
Create a 4-digit password using the 0 to 9 buttons on the
remote control.
DVD-Recorder
Parental Control
Setting the Rating Level
1
Select Rating Level using the …† buttons.
No Disc
DVD-Recorder
Timer Rec.
No Disc
Setup
Create the password
Parental Control
Timer Rec.
Password
: On
√
Setup
Rating Level
: Level 1 Kids
√
Change Password
0~9 NUMBER
ENTER
RETURN
EXIT
MOVE
5
The Re-enter Password screen appears to confirm
the password. Enter your password again.
2
Confirm the password
ENTER
RETURN
The Parental Control screen appears.
DVD-Recorder
Parental Control
No Disc
Password
Password
√
Setup
Rating Level
√
■
NOTE
√
3
ENTER
RETURN
EXIT
Select the desired Level you want using the …†
buttons, then press the ENTER or √ button.
For example, if you select up to Level 6, discs that
contain Level 7, 8 will not play. A higher number indicates
that the program is intended for adult use only.
√
On
Setup
MOVE
Off
Level 8 Adults
: On
Level 7
: Level 1 Kids
Level 6
Change Password Level 5
Level 4
Level 3
Level 2
Level 1 Kids
Timer Rec.
EXIT
Press the ENTER or √ button, and then select On
using the …† buttons.
Timer Rec.
Parental Control
No Disc
MOVE
6
EXIT
Press the ENTER or √ button.
DVD-Recorder
Timer Rec.
0~9 NUMBER
RETURN
Parental Control
No Disc
Setup
ENTER
ENTER
RETURN
EXIT
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
English - 43
System Setup
DVD-Recorder
√
R135-XAA-ENG-30-44
2006.3.11
9:56 AM
Page 44
Changing the Password
■
NOTE
1
Select Change Password using the …† buttons.
DVD-Recorder
Parental Control
No Disc
Timer Rec.
Password
: On
√
Setup
Rating Level
: Level 1 Kids
√
Change Password
MOVE
System Setup
2
ENTER
√
RETURN
EXIT
Press the ENTER or √ button.
The “Enter the password” message will be displayed.
DVD-Recorder
Change Password
No Disc
Timer Rec.
Setup
0~9 NUMBER
3
Enter the password
ENTER
RETURN
EXIT
Enter the 4-digit password using the 0 to 9 buttons on
the remote control.
DVD-Recorder
Change Password
No Disc
Timer Rec.
Setup
Enter the password
* * * *
0~9 NUMBER
4
ENTER
RETURN
EXIT
The “Confirm the password” message will be
displayed.
Enter your password again using the 0 to 9 buttons on
the remote control.
DVD-Recorder
Change Password
No Disc
Timer Rec.
Setup
Confirm the password
* * * *
0~9 NUMBER
44 - English
ENTER
RETURN
EXIT
See page 94 if you forgot your password.
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 45
Recording
This section shows various DVD recording
methods.
Before Recording
This unit can record on various types of discs. Before
recording, read the following instructions and select the
disc type according to your preference.
Recordable discs
This recorder can record on the following discs.
DVD-RW
DVD-R
• DVD-RWs are rewritable.
• DVD-Rs are non-rewritable
Disc Types
Recording Recording Device Finalizing Additional Recording
format
in Samsung Recorder
Samsung
VR Mode
Other Company
DVD-RW
Samsung
V Mode
Other Company
Samsung
V Mode
DVD-R
Other Company
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . .45
finalized
not finalized
finalized
not finalized
finalized
not finalized
finalized
not finalized
finalized
not finalized
finalized
not finalized
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Not recordable
Not recordable
Recordable
Not recordable
Not recordable
Recording the current TV program
■
you are watching . . . . . . . . . . . . . . . . . . . . . . . . . .47
NOTE
Recording from External Equipment . . . . . . . . . . .49
■
Copying from a Camcorder . . . . . . . . . . . . . . . . . .50
Making a One Touch Recording (OTR) . . . . . . . . .51
Setting a Timer Recording . . . . . . . . . . . . . . . . . . .51
Flexible Recording (for Timer Recording only) . . .53
Editing the Scheduled Record List . . . . . . . . . . . .53
Deleting the Scheduled Record List . . . . . . . . . . .54
Finalize
- This closes the DVD-R/-RW and no
additional recording can be done.
Unfinalize
- This allows additional recording on a
DVD-RW disc originally recorded on the
DVD-R135.
- A DVD-RW disc that has been recorded
by DAO(Disc At once) in a PC cannot be
unfinalized.
- A DVD-RW disc that has been recorded
in Video Mode of another manufacturer's
recorder cannot be unfinalized.
- A DVD-R disc cannot be unfinalized.
Recording the Scheduled Record List . . . . . . . . . .55
English - 45
Recording
Compatibility between Samsung and Other Companies'
Recorders
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 46
Record Mode
Recording Formats
Since available functions differ depending on the disc
type, select a disc that best fits your preference; When
you insert an unused disc, the following message
appears.
DVD-RW: When a blank disc is first inserted, the
message “Uninitialized Disc Do you want to
initialize this disc?” will appear. If you select
Yes, initializing will be start.
Select one of four record modes by pressing the REC
MODE button repeatedly for the desired recording time
and picture quality while the unit is in Stop mode.
In general, picture quality improves as the recording
time decreases.
In FR mode, the most suitable record mode is selected
automatically according to the remaining time on the
disc and length of the timer recording set.
Mode
Uninitialized Disc
Do you want to initialize this disc?
Yes
No
In case of DVD-RW disc, you can change the
mode, Refer to Fomatting a Disc on page 87.
DVD-Recorder
Disc Manager
Characteristic
Recording Times Data Rates
Select when the video
XP
(high quality mode) quality is important.
Approx. 1 hour
about 8 Mbps
Select to record in
SP
(standard quality mode) standard quality.
Approx. 2 hours
about 4 Mbps
Approx. 4 hours
Select when a long
LP
(long recording mode) recording time is required. about 2 Mbps
Select when a longer Approx. 6 hours/
EP
about 1.2 Mbps
recording time is
(extended mode)
Approx. 8 hours/
required.
about 0.8 Mbps
for timer recording only Approx 60 to 480 Min
FR
(Flexible Recording) see page 53.
Approx 0.8 to 8Mbps
Recording
DVD-RW(VR)
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Format : format
DVD-VR
ChooseDisc
the recording
for DVD-RW
Disc Manager
Disc Finalize
Timer Rec.
Delete
All Title Lists
DVD-VR
DVD-V
Setup
√
MOVE
ENTER
RETURN
√
√
EXIT
Unrecordable video
Video with copy protection cannot be recorded on this
DVD Recorder. When the DVD Recorder receives a copy
guard signal while recording, recording stops and the
following message appears on the screen.
DVD-R : Formatting the DVD is unnecessary.
You cannot record copy protected movie.
DVD-RW(Video mode)/-R
• Chapters will be created automatically when you finalize
recording on DVD-R / DVD-RW discs in Video mode.
The chapter’s length (interval between chapters) varies
according to the recording mode.
• Simple editing (erasing titles/changing title name)
DVD-RW(VR mode)
• This mode allows multiple editing functions (such as
deletion of the whole title, partial deletion of a title, etc.)
• Various editing options using a created Playlist
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have
one of the following three signal types, COPY-Free, CopyOnce and Copy-Never. If you want to record a copy-once
type program, use DVD-RW with CPRM in VR Mode.
Signal type
Media
DVD-RW(Ver.1.1)
Copy-Free
Copy-Once
Copy-Never
O
-
-
O*
DVD-RW(Ver.1.1)
with CPRM
VR mode
O
Video mode
O
-
-
DVD-R
O
-
When a “Copy Once” recording has been made, recording
cannot be done anymore.
46 - English
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 47
Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the media on
which it is recorded. It is supported by some DVD recorders,
but not by many DVD players. Each blank recordable DVD
has a unique 64-bit media ID etched in the BCA(Burst Cutting
Area). When protected content is recorded onto the disc, it can
be encrypted with a 56-bit C2 (Cryptomeria) cipher derived
from the media ID.
During playback, the ID is read from the BCA and used to
generate a key to decrypt the contents of the disc.
If the contents of the disc are copied to other media, the ID will
be absent or wrong and the data will not be decryptable.
Recording the current TV
program you are watching
Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
About the INFO button
Checking the available disc space
(Disc Information)
Press the OPEN/CLOSE button and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
DVD-RW
If an unused DVD-RW disc is inserted, you will be
prompted to initialize first. Make your selection using
the œ √ buttons, then press ENTER.(See page 46)
Recording
The INFO function allows you to view the current status
and progress of playback and recording. Depending on
the disc type and status, the displayed screen may be
different.
1
Uninitialized Disc
Do you want to initialize this disc?
Yes
No
When recording on a used disc, make sure that there is
enough disc space for recording. With DVD-RWs, you
can free up disc space by erasing titles.
• Press the INFO button.
The disc information display window appears.
Items in the display differ depending on the disc type
or the recording format.
!
#
DVD-RW(VR)
Disc Name
$
%
^
Total Title
Total Playlist
Recordable Time
Protection
Screen
JAN 01 2006 SUN
&
Disc Info
@
12:00 AM
*
Disc
1
None
01: 12 XP
Not Protected
CH 11 [Mono]
! Disc Type
@ Current information display status
# Disc Name
$ Total Title : Total number of titles
% Total Playlist : Total number of Playlists
^ Recordable Time : The longest continuous
recording time in each of the record
modes(approximate)
& Date : Current date
* Time : Current time
English - 47
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 48
3
Press the CH ( / ) or number ( ~ ) buttons
to select the current program you want to record.
4
Press the REC MODE button repeatedly, (or press the
REC MODE button and then press the …† button) to
select the recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
Record Mode
XP (01:11)
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RW/DVD-R discs, the message
‘Updating the information of disc. Please wait for a
moment.’ is displayed.
To pause recording
Press the PLAY/PAUSE (
recording in progress.
) button to pause
Press the PLAY/PAUSE (
recording.
) button again to resume
■
You can not change the record mode and
the channel during recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
If you are using a Cable Box(no antenna),
you cannot watch a different cable TV
program from the one you're recording.
■
DVD-RW discs must be formatted before
starting to record. Most new discs are sold
unformatted.
■
Do not use DVD-R authoring discs with
this unit.
NOTE
5
Press the REC button.
Information concerning the channel is displayed on the
screen and then recording begins. Icon( ) is displayed
on the front panel.
Recording
Recording : CH10 [Mono]
To view the current status of the disc and progress of recording :
Press the INFO button, and the information about the disc will
appear.
DVD-RW(VR)
Disc Name
Disc
Disc Info
Total Title
Total Playlist
Recordable Time
Protection
Screen
JAN 01 2006 SUN
7
None
01: 11 XP
Not Protected
Recording : CH 10 [Mono]
12:00 AM
Press the INFO button once again to view information about the
recording.
DVD-RW(VR)
Name
Recording Info
JAN/01/2006 12:00 AM
CH 10
Recording Title 7
Created Time
JAN/01/2006 12:00 AM
Recording Time 00:00:41
JAN 01 2006 SUN
12:00 AM
48 - English
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 49
Recording from External
Equipment
5
Press the REC button.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
• When using DVD-RW/DVD-R discs, the message
‘Updating the information of disc. Please wait for a
moment.’ is displayed.
Before you start
Check that the disc has enough available space for the
recording. Adjust the record mode.
You can not change the record mode and
input source during recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RW discs must be formatted before
starting to record. Most new discs are sold
unformatted.
■
Do not use DVD-R authoring discs with
this unit.
NOTE
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
3
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is inserted, the message
“Uninitialized Disc Do you want to initialize this disc?” will
appear (See page 46)
Press the INPUT SEL. button to select the input
source according to the connection you made.
The front panel display changes in the following
sequence:
➞ Channel Number ➞ AV1 ➞ AV2 ➞ DV
If you’ve connected a digital camcorder, press the
INPUT SEL. button to select DV. (See page 48)
4
Press the REC MODE button repeatedly, (or press
the REC MODE button and then press the …†
button) to select the recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
Record Mode
XP (01:11)
English - 49
Recording
■
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 50
Copying from a Camcorder
5
Select the PLAY ( √ ) icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
6
To start recording, select REC( ● ) icon in the top side
of the screen using the œ √ buttons, then press the
ENTER button.
You may control a Digital Camcorder using the IEEE1394
(DV) interface.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
Before you start
Check that the disc has enough available space for the
recording. Adjust the record mode. See pages 27~28 to
see how to connect the camcorder to your DVD recorder.
1
Recording
2
3
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
If an unused DVD-RW disc is inserted, whether to
initialize or not will be asked first. (See page 46)
Press the REC MODE button repeatedly (or press
the REC MODE button and then press the …†
button) to select the recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
Record Mode
4
XP (01:11)
Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables Digital camcorder control appears on the top
of the screen.
DV
The DV device is connected
MOVE
50 - English
SELECT
RETURN
• When using DVD-RW/DVD-R discs, the message
‘Updating the information of disc. Please wait for
a moment’ is displayed.
■
You can not change the record mode and
input source while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
DVD-RW discs must be formatted before
starting to record. Most new discs are sold
unformatted.
■
Do not use DVD-R authoring discs with
this unit.
■
To access on-screen controls during
recording, press the œ or √ buttons.
■
When copying from a camcorder and the
end of the tape is reached (no Video), the
screen may turn blue or purple.
NOTE
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 51
Press the INFO button once again. Then you can check
the information about the title being recorded
Making a One Touch
Recording (OTR)
You can set the DVD Recorder to record in preset
increments by pressing the REC button repeatedly.
1
If you want to record a TV channel, use the CH( / )
buttons or number buttons to select a desired channel.
If you want to record from a connected external
component, press the INPUT SEL. button to select an
appropriate external input(AV1, AV 2 or DV).
DVD-RW(VR)
Name
Recording Info
JAN/01/2006 12:00 AM
CH 10
Recording Title 7
Created Time
JAN/01/2006 12:00 AM
Recording Time 00:00:41
12:00 AM
JAN 01 2006 SUN
To stop recording
Press the STOP ( ) button. The message “Press
STOP button once more to cancel Timer Record.” is
displayed.
• CATV channels: 1 to 125
• TV channels: 2 to 69
Press STOP button once more
to cancel Timer Record.
Example 1) Selecting Channel 120
+
+
Example 2) Selecting Channel 9
+
2
Press the REC button to start recording.
3
Press the REC button to adjust the recording time.
) button again to stop recording.
Setting a Timer Recording
➞ 0:30 ➞ 1:00 ➞ 1:30 ➞ 2:00 ➞ 3:00 ➞ 4:00➞ off
You need to set the Clock (Setup – Clock Set) before
proceeding with a timer recording. (See page 31)
■
NOTE
The timer counter decreases to 0:00, then
the DVD Recorder stops recording.
After finishing recording, the DVD
Recorder will be turned off automatically.
To view the current status of the disc and the progress of
recording : Press the INFO button, and information about
the disc will appear.
DVD-RW(VR)
Disc Name
Disc
Disc Info
Total Title
Total Playlist
Recordable Time
Protection
Screen
JAN 01 2006 SUN
7
None
01: 11 XP
Not Protected
Recording : CH 10 [Mono]
12:00 AM
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc
tray.
3
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is inserted, whether to
initialize or not will be asked first. (See page 46.)
Press the MENU button in Stop mode.
You can also set a timer recording via the TIMER button.
English - 51
Recording
Press the STOP (
R135-XAA-ENG-45-55
4
2006.3.11
9:57 AM
Page 52
Press the …† buttons to select Timer Rec., and
then press the ENTER or √ button.
DVD-Recorder
Timer Record
DVD-RW(VR)
Title List
Timer Record
√
Playlist
Scheduled Record List
√
Disc Manager
• Start/End Time: Start and end time of the timer
recording
• Mode (Record mode)
XP : Approx. 1 hour
SP : Approx. 2 hours
LP : Approx. 4 hours
EP : Approx. 6 hours or 8 hours.
FR : See page 53.
Timer Rec.
■
Setup
NOTE
MOVE
5
ENTER
RETURN
EXIT
Press the …† buttons to select Timer Record,
and then press the ENTER or √ button.
When you are recording at EP mode on a
DVD-RW(V)/-R disc, it may not record the full 6
or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a Program with a lot
of action, it uses a higher bit rate which in turn
consumes more disc memory.
The Timer Record Input items are displayed.
Scheduled Record List
DVD-Recorder
DVD-RW(VR)
Current Time 12:03 AM
No. Source Date
Start
End
7
Press the ENTER button.
Mode Edit
Date
Scheduled Record List
DVD-Recorder
No. 01
Source
DVD-RW(VR)
Start
End
Current Time 12:03 AM
Mode
No. Source Date
CH 11
01/01
12:03 AM
02:03 AM
SP
01
02
Recordable Time : 01:59 SP
CH 11
01/ 01
/
Start
05:00 AM
:
End
Mode Edit
07:00 AM
:
SP
√
√
Recordable Time : 01:59 SP
MOVE
ENTER
RETURN
EXIT
Recording
Recordable Time : 01:59 SP
6
Fill in the items using the …† œ √ buttons.
œ √ : Moves to the previous/next item,
…† 0~9 : Sets a value.
• Source: Select the video input source (AV 1, AV 2) or the
broadcasting channel you want to make a timer recording
of. When selecting channels to be recorded, the …† buttons
on the remote control can let you select only the channels
that have been memorized during Auto Channel Memory.
For the selection of other channels, use the number buttons.
• Date: Date that the timer recording starts
- There are three options when setting the date. see below:
MOVE
■
NOTE
…† or number buttons until the date you want
appears.
No. 01
Date
CH 11
01/01 12:03 AM
Start
End
Mode
02:03 AM
SP
@ To make a recording at the same time every day
(Mon-Fri), press the …† buttons until Mon-Fri
appears:
No. 01
Source
CH 11
Date
Start
Mon~Fri 12:03 AM
End
Mode
02:03 AM
SP
Recordable Time : 01:59 SP
# To make a recording on a specific day of the
week(Sun’s-Sat’s), press the …† buttons until
Sun’s….Sat’s appears:
No. 01
Source
Date
CH 11
Sun’s
Start
12:03 AM
Recordable Time : 01:59 SP
52 - English
■
■
Recordable Time : 01:59 SP
End
Mode
02:03 AM
SP
RETURN
EXIT
• ( ) and Timer Set will appear on the front panel
display. This means that a timer recording is set.
• Recording is automatically performed when the set time
is reached.
! To make a recording on a specific date, press the
Source
ENTER
If the timer settings overlap
The programs are recorded in order of priority.
If timer recording is set for the first program
and then again for the second program and
both programs overlap, the following message
will appear on the screen: ‘This setting is
identical with 1.’ The message shows that the
first program has priority.
After recording of the first program is complete,
the second program starts being recorded.
To exit without saving the current setting
Press the MENU or TIMER button.
To return to the previous menu
Press the RETURN button if you don't want to
set a timer recording.
R135-XAA-ENG-45-55
■
NOTE
■
2006.3.11
9:57 AM
Page 53
The timer recording time may differ from the
set time depending on the disc and the
overall timer recording status (for example,
recording times overlapping, or when the
previous recording ends within 3 minutes of
the start of the next recording.)
will start blinking if Timer Recording is not
ready to start.
3
Press the …† buttons to select Scheduled
Record List, and then press the ENTER or √
button.
Scheduled Record List
DVD-Recorder
DVD-RW(VR)
Current Time 12:03 AM
No. Source Date
01
02
03
CH 11
CH 7
01/ 01
01/03
/
Start
05:00 AM
12:06 AM
:
End
Mode Edit
07:00 AM
02:06 AM
:
SP
SP
√
√
√
Recordable Time : 01:59 SP
Flexible Recording (for
Timer Recording only)
MOVE
4
ENTER
RETURN
EXIT
Press the …† buttons to select the number of the
Scheduled Record List you want to edit, and then
press the ENTER or √ button.
The Edit and Delete items are displayed.
Scheduled Record List
DVD-Recorder
In FR mode, the most suitable record mode is selected
automatically, according to remaining time on the disc
and length of the timer recording set.
DVD-RW(VR)
Current Time 12:03 AM
No. Source Date
01
02
03
The FR mode recording setup is the same as Timer
Recording setup. When setting the mode in step 6,
select FR Mode.(See page 52.)
CH 11
CH 7
01/ 01
01/03
/
Start
05:00 AM
12:06 AM
:
End
Mode Edit
07:00 AM
02:06 AM
:
SP
SP
Edit√
Delete
√
√
Recordable Time : 01:59 SP
MOVE
5
RETURN
EXIT
Press the …† buttons to select Edit, and then
press the ENTER or √ button.
The Timer Record Input item is displayed.
Scheduled Record List
DVD-Recorder
DVD-RW(VR)
Current Time 12:08 AM
No. Source Date
Start
End
Mode Edit
No. 01
You can change timer record settings using the
scheduled record list menu.
Source
Date
Start
CH 11
01/01
05:00 AM
End
07:00 AM
Mode
SP
Recordable Time: 01:59 SP
Recordable Time : 01:59 SP
MOVE
1
Press the MENU button in STOP mode.
2
Press the …† buttons to select Timer Rec., and
then press the ENTER or √ button.
DVD-Recorder
Timer Record
DVD-RW(VR)
Title List
Timer Record
√
Playlist
Scheduled Record List
√
ENTER
RETURN
EXIT
Edit the items you want to modify. See the Timer
Record section for more information on Timer Record
Input items. (See page 52.)
6
Move through the items with the œ √ buttons and
change the settings with …† or number buttons
and press the ENTER button.
7
Press the MENU button after the operation is
finished.
Disc Manager
Timer Rec.
Setup
MOVE
ENTER
RETURN
The menu screen will disappear.
EXIT
English - 53
Recording
Editing the Scheduled
Record List
ENTER
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 54
Deleting the Scheduled
Record List
4
Press the …† buttons to select the number of the timer
recording you want to delete, and then press the ENTER
or √ button.
The Edit and Delete items are displayed.
Scheduled Record List
DVD-Recorder
DVD-RW(VR)
Current Time 12:03 AM
No. Source Date
01
02
03
CH 11
CH 7
01/ 01
01/03
/
Start
05:00 AM
12:06 AM
:
End
Mode Edit
07:00 AM
02:06 AM
:
SP
SP
Edit√
Delete
√
√
You can delete timer record list using the scheduled
record list menu.
Recordable Time : 01:59 SP
MOVE
1
2
ENTER
RETURN
EXIT
Press the MENU button in Stop mode.
Press the …† buttons to select Timer Rec., and then
press the ENTER or √ button.
DVD-Recorder
5
Press the …† buttons to select Delete, and then press
the ENTER or √ button.
You will be prompted with the delete confirmation
message, For example : “Do you want to delete
‘No.01’?”.
Timer Record
DVD-RW(VR)
Title List
Timer Record
√
Playlist
Scheduled Record List
√
Scheduled Record List
DVD-Recorder
DVD-RW(VR)
Disc Manager
Current Time 12:08 AM
No. Source Date
Timer Rec.
Source
Recording
Setup
Date
Start
No.01
01
No.
Start
End
Mode Edit
End
Mode
Do you want to delete ‘No.01’?
CH 11
01/01
05:00 AM
Yes
MOVE
ENTER
RETURN
Recordable Time: 01:59 SP
EXIT
07:00 AM
SP
No
Recordable Time : 01:59 SP
MOVE
3
ENTER
RETURN
EXIT
Press the …† buttons to select Scheduled Record
List, and then press the ENTER or √ button.
DVD-Recorder
Timer Record
DVD-RW(VR)
Title List
Timer Record
√
Playlist
Scheduled Record list
√
Disc Manager
Timer Rec.
Setup
MOVE
ENTER
RETURN
6
Press the œ √ buttons to select Yes, and then press the
ENTER button.
7
Press the MENU button after the operation is finished.
The menu screen will disappear.
The selected entry will be deleted from the list.
EXIT
■
NOTE
Scheduled Record List
DVD-Recorder
DVD-RW(VR)
Current Time 12:03 AM
No. Source Date
01
02
03
CH 11
CH 7
01/ 01
01/03
/
Start
05:00 AM
12:06 AM
:
End
Mode Edit
07:00 AM
02:06 AM
:
SP
SP
√
√
√
Recordable Time : 01:59 SP
MOVE
54 - English
ENTER
RETURN
EXIT
You can not delete programs that are
currently being recorded.
R135-XAA-ENG-45-55
2006.3.11
9:57 AM
Page 55
Recording the
Scheduled Record List
When the start time in the Scheduled Record List is
reached while the unit is powered off, the unit will
automatically power on and start recording.
1
When the scheduled recording is operating, the
program being recorded will not display on TV.
• Power on TV using the TV remote control.
• Power off TV using the TV remote control if you don’t
want to see the program being recorded.
To stop recording
Press the STOP ( ) button. The message “Press
STOP button once more to cancel Timer Record.” is
displayed.
Recording
Press STOP button once more
to cancel Timer Record.
Press the STOP (
■
NOTE
) button again to stop recording.
If a copy protection signal is received during
recording, recording will stop.
You cannot record copy protected movie.
■
If there is no free disc space or the disc is
not recordable, recording will not operate.
(You can record after replacing the disc.)
English - 55
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 56
Before Playing
Playback
Read the following information before playing a disc.
This section introduces basic playback functions
and playback by disc type.
Region code (DVD-Video only)
Both the DVD recorder and the discs are coded by region.
These regional codes must match in order for the disc to play.
If the codes do not match, the disc will not play. The Region
Number for this recorder is described on the rear panel of the
recorder.
Disc types that can be played
Disc Types
Disc Logo Recorded content
DVD-VIDEO
AUDIO-CD
JPEG CD-R/-RW
MP3 CD-R/-RW
MPEG4 CD-R/-RW
Playback
DVD-RAM
D I G I TA L
Dolby Digital
DIGITAL OUT
DTS
Stereo
Digital Audio
NTSC broadcast
system in U.S.A,
Canada, Korea,
Japan,etc.
DVD-RW
DVD-R
■
NOTE
DivX
MP3
Before Playing.....................................................................56
Playing a Disc......................................................................57
Playing an Audio CD/MP3 .................................................66
Depending on the disc type, it may take
up to 20 seconds to load.
Discs that cannot be played
•
•
•
•
Playing a Picture CD...........................................................69
Playing an MPEG4 Disc.....................................................70
•
Playing the Title List ............................................................71
•
•
•
56 - English
Disc Shape Max. Playing Time or minute
Single sided(5”)
240
VIDEO
Double sided(5”)
480
AUDIO
Single sided(3.5”)
80
Double sided(3.5”)
160
Single sided(5”)
74
AUDIO
Single sided(3.5”)
20
Single sided(5”)
JPEG Images
Single sided(3.5”)
Single sided(5”)
MP3 Audio
Single sided(3.5”)
Single sided(5”)
MPEG4 Movie
Single sided(3.5”)
1hr (XP: Excellent Quality)
Single sided(5”) 2hrs (SP: Standard Quality)
(4.7GB) 4hrs (LP: Long Playback)
VIDEO
6 or 8hrs(EP:Extended)
AUDIO
2hrs (XP: Excellent Quality)
Double sided(5”) 4hrs (SP: Standard Quality)
(9.4GB) 8hrs (LP: Long Playback)
12 or 16hrs (EP:Extended)
1hr (XP: Excellent Quality)
VIDEO
5” (4.7GB) 2hrs (SP: Standard Quality)
AUDIO
4hrs (LP: Long Playback)
6 or 8hrs (EP:Extended)
1 (XP: Excellent Quality)
VIDEO
5” (4.7GB) 2hrs (SP: Standard Quality)
4hrs (LP: Long Playback)
AUDIO
6 or 8hrs(EP:Extended)
DVD-Video with a region number other than “1” or “ALL”
5” 2.6 GB and 5.2 GB DVD-RAM
3.9 GB DVD-R Disc for Authoring.
DVD-RW(VR mode) not recorded following the Video Recording
Standard
Unfinalized DVD-R,unfinalized DVD-RW(V mode) recorded on
other equipment.
PAL discs
DVD-ROM/PD/MV-Disc, etc.
Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
R135-XAA-ENG-56-72
■
NOTE
■
■
■
■
2006.3.11
9:58 AM
Page 57
This DVD recorder can only operate with
discs that are compatible with DVD-RAM
Standard Version 2.0.
Playback and/or recording may not work for
some types of discs, or when specific
operations, such as angle change and
aspect ratio adjustment, are being
performed. Information about the discs is
written in detail on the box. Please refer to
this if necessary.
Do not allow the disc to become dirty or
scratched. Fingerprints, dirt,dust,scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the
disc for recording.
DVD-RAM/-RW/-R discs may not be able to
play on some DVD players, depending on
the player, disc and the condition of the
recording.
Discs with PAL programs recorded on them
can not be recorded on using this product.
Playing a Disc
1
Press the OPEN/CLOSE button.
2
Place a disc gently into the tray with the disc’s
label facing up.
The tray opens.
For DVD-RAM discs, insert the printed side facing up.
3
Press the OPEN/CLOSE button to close the disc
tray.
• Your DVD Recorder closes the disc tray and loads the
disc automatically.
• When the recorder is powered on and a disc is in the
tray, the unit will be activated and wait in Stop mode.
• Press PLAY( ) button to start playback.
• If you want the unit to play automatically when it is
powered off with a disc in the unit, power on with the
PLAY( ) button.
4
Press the STOP(
■
NOTE
■
■
■
■
■
■
■
When you stop playing the disc, the Recorder
remembers where you stopped. When you press PLAY
button again, it will pick up where you left off. (unless
the disc is removed or the recorder is unplugged, or if
you do not press the STOP button twice.) This function
is only applicable to DVD-VIDEO, DVD-RAM, DVDRW, DVD-R or audio CDs (CD-DA).
Do not move your DVD recorder while
playing, as this may cause damage to the
disc.
Make sure to press the OPEN/CLOSE
button to open or close the disc tray.
Do not push the disc tray while it is being
opened or closed, as this may cause a
product malfunction.
Do not place foreign materials on or in the
disc tray.
Some functions may perform differently or be
disabled depending on the disc type.
If this occurs, refer to the instructions written
on the disc case.
Be especially careful that children's fingers
are not caught between the disc tray and the
tray chassis when it closes.
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the
DVD player.
English - 57
Playback
Caution
) button to stop playback.
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 58
Using the Search Functions
Using the Disc Menu & Title Menu
Some discs contain a dedicated menu system that allow
you to select special functions for the title, such as chapters,
audio track, subtitles, film previews, information on
characters, etc.
For DVD-VIDEO discs
1
Press the DISC MENU button to enter the disc's
menu.
Searching through a Chapter or Track
• Move to the setup menu related to the playback
operation.
• You can select the audio language and the subtitles
provided by the disc.
2
Press the TITLE MENU button to move to the title
menu of the disc.
• Use this button if the disc contains more than one title. Some
During playback, press the SEARCH(
on the remote control.
1
) button
type of discs may not support the title menu function.
For DVD-RAM/-RW/-R discs
Playback
1
Press the TITLE LIST button to move to the Title
List.
■
NOTE
■
Title List : The Title List is simply a list of
titles on a disc. If a title is
deleted, that title cannot be
played again.
Playlist (DVD-RAM/-RW(VR)) :
A playlist is a custom-made list of titles.
When one playlist is played, only the titles
within the playlist will play and then stop.
Even if that playlist is deleted, the original
recording will not be deleted.
58 - English
DVD-VIDEO/
DVD-RAM/
DVD-RW/DVD-R
Fast 1(X 2) ➞
Fast 3(X 8) ➞
Fast 5(X 32) ➞
Fast 1(X 2)
Fast 2(X 4) ➞
Fast 4(X16) ➞
Fast 6(X128) ➞
MPEG4
AUDIO CD
(CDDA)
Fast 1 ➞
Fast 2 ➞
Fast 3
Fast X 2 ➞
Fast X 4 ➞
Fast X 8 ➞
Fast X 2
• You can scan the program in reverse.
To return to normal speed playback, press the
PLAY( ) button.
• When you press and hold the SEARCH(
)
button, playback is done at the default speed of fast 2.
If you release the SEARCH(
) button, playback
is performed at a normal speed.(Except CD-DA)
• The speed marked in this function may be different
from the actual playback speed.
■
NOTE
■
No sound is heard during Scan(Search)
mode except fast playback (1.7X speed)
mode.
For CD(CD-DA), You can hear sound
during Scan mode.
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 59
Searching Chapters or Tracks
About ANYKEY
• During playback, you can search quickly
through a chapter or track.
During playback, press the SKIP(
) button on
the remote control.
• If you press the SKIP( ) button, it moves to the
beginning of the chapter or track or marker(DVDRW(VR mode)).
Pressing the button once again within 3 seconds
returns to the beginning of the previous chapter or
track or marker(DVD-RW(VR mode)).
• If you press the SKIP( ) button, it moves to the
next chapter or title or marker(DVD-RW(VR mode)).
1
Slow Motion Play
1
Moving to a scene directly using the ANYKEY
In Pause mode, press the SEARCH (
the remote control.
• If you press the SEARCH(
Slow 1(1/2)➞
Slow 1(1/2)➞
) button on
• If you want to move to a title or chapter to find
a desired scene.
) button,
Slow 2(1/4) ➞
• If you press the SEARCH(
The ANYKEY function allows you to easily search for a
desired scene by accessing title, chapter, track, and
time. You can also change the subtitle and audio
settings and set some features including Repeat, Angle,
and Zoom.
Slow 3(1/8)
1
) button,
Slow 2(1/4) ➞
Slow 3(1/8)
DVD-VIDEO
• To return to normal speed playback, press the
) button.
Title
1/2
Chapter
1/20
Time
00:00:00
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
Press and hold the SEARCH( ) button during pause,
and the disc will play slowly at a 1/2 speed. If the button
is released, the pause operation will resume.
■
NOTE
■
The speed marked in this function may be
different from the actual playback speed.
Slow motion operates only in the forward
direction on MPEG 4 discs.
MOVE
2
D 2CH
Playback
PLAY(
Press the ANYKEY button during playback.
CHANGE
Press the …† buttons to select the Title or Chapter.
DVD-VIDEO
Step Motion Play
Title
1/2
Chapter
1/20
Time
00:00:00
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
MOVE
1
CHANGE
Press the STEP(
) button on the remote
control in the still mode.
• Each time the button is pressed, a new frame will appear.
When STEP(
) is pressed, the previous frame will be activated.
When STEP(
) is pressed, the next frame will be activated.
• To return to normal speed playback, press the PLAY(
■
NOTE
D 2CH
) button.
Step motion operates only in the forward
direction on MPEG 4 discs.
3
Press the œ √ buttons or number (0~9) buttons
to select the desired scene and then press the
ENTER button.
English - 59
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 60
• If you want to move to a desired time to help you
find a scene.
1
Press the ANYKEY button during playback.
Using the Repeat Function
Playing Repeatedly(Repeat Playback)
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:33
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
MOVE
Using the REPEAT button
D 2CH
CHANGE
1
Press the REPEAT button during playback.
Repeat
2
Off
Press the …† buttons to select the Time.
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:09:20
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
D 2CH
MOVE 0~9 NUMBER
Playback
3
2
Enter the time in the sequence of hours,
minutes, and seconds using the number buttons
and then press the ENTER button.
■
NOTE
■
Press the REPEAT button or press the …†
buttons to select the Title or Chapter you want
to play repeatedly.
Press the ENTER button.
Repeat
Title
The Time Search function does not
operate in some discs.
To make the screen disappear, press the
ANYKEY again.
Chapter : Repeats the chapter that is playing.
Title : Repeats the title that is playing.
To return to normal playback
3
Press the REPEAT button and select Off by
using …† or REPEAT button.
Press the ENTER or CANCEL button to return to normal
playback.
60 - English
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 61
Using the ANYKEY button
1
Playing a Certain section Repeatedly(A-B Repeat Playback)
Press the ANYKEY button during playback.
Using the ANYKEY button
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:33
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
MOVE
D 2CH
1
Press the ANYKEY button during playback.
DVD-VIDEO
CHANGE
Title
1/2
Chapter
1/20
Time
00:00:33
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
2
Press the …† buttons to select Repeat and
press the œ √ buttons to select the Title or
Chapter you want to play repeatedly.
2
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:01:05
Subtitle
Off
ENG
Audio
Angle
Title
1/3
Zoom
Off
Repeat
MOVE
MOVE
D 2CH
DVD-VIDEO
SELECT
Title
1/2
Chapter
1/20
Time
00:01:05
Subtitle
Off
ENG
Angle
A-B
1/3
Zoom
Off
Repeat
MOVE
Press the ENTER button.
D 2CH
SELECT
To make the menu screen disappear, press the
ANYKEY or RETURN button.
■
DVD-RAM, DVD-RW(VR mode),
unfinalized DVD-R and unfinalized DVDRW (Video mode) do not repeat a chapter.
3
Press the ENTER button.
4
Press the ENTER button at the point where you
want the repeat play to start (A) and press it
again at the point where you want the repeat
play to stop (B).
Repeat playback of the A-B section starts.
■
NOTE
■
■
If you set point (B) before five seconds
has lapsed, the prohibition mark ( ) will
appear.
You can also activate Normal Playback by
pressing the CANCEL button.
Audio CDs(CD-DA) and MP3 discs do not
support the Repeat A-B function.
English - 61
Playback
NOTE
CHANGE
Press the …† buttons to select Repeat and
press the √ button to select A-B.
Audio
3
D 2CH
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 62
Selecting the Audio language
Selecting the Subtitle
Subtitle languages may not work depending on the
disc type. This is only available during playback.
Audio languages may not work depending on the disc
type. This is only available during playback.
(VR mode)
Using the SUBTITLE button
(VR mode)
Using the AUDIO button
1
Press the SUBTITLE button during playback.
Subtitle
Off
1
Press the AUDIO button during playback.
Audio
2
ENG Dolby Digital 2CH
Press the SUBTITLE button or …† buttons to
select the desired subtitle language.
To make the menu screen disappear, press the
CANCEL or RETURN button.
2
Press the AUDIO button or …† buttons to
select the desired audio language.
Using the ANYKEY button
1
Press the ANYKEY button during playback.
Using the ANYKEY button
Playback
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:33
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
1
D 2CH
DVD-VIDEO
CHANGE
MOVE
Press the ANYKEY button during playback.
Title
1/2
Chapter
1/20
Time
00:00:33
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
2
Press the …† buttons to select Subtitle and
press the œ √ buttons to select the desired
subtitle language.
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:10
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
MOVE
■
NOTE
■
■
2
CHANGE
Press the …† buttons to select Audio and
press the œ √ buttons to select the desired
audio language.
D 2CH
CHANGE
The subtitle display may be different depending
on the disc type.
If the subtitles overlap, disable the caption
function on your TV.
Some discs allow you to select the language for
the disc menu only.
62 - English
MOVE
D 2CH
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:10
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
MOVE
D 2CH
CHANGE
R135-XAA-ENG-56-72
■
NOTE
■
2006.3.11
9:58 AM
Page 63
Audio languages may be different because
they are disc-specific.
Some discs allow you to select the audio
language for the disc menu only.
■
NOTE
■
This function is disc-dependent, and may
not work all DVDs.
This function does not work when a DVD
has not been recorded with a multicamera angle system.
Changing the Camera Angle
Zooming-In
When a DVD-VIDEO contains multiple angles of a
particular scene, you can select the Angle function.
This is only available during playback.
If the disc contains multiple angles, the ANGLE mark
appears on the screen.
1
DVD-Video
Using the ANGLE button
1
Press the ANYKEY button during playback or pause.
Press the ANGLE button during playback.
Title
1/2
Chapter
1/20
Time
00:00:33
Subtitle
Off
Audio
ENG
Repeat
Angle
Off
1/3
Zoom
Off
D 2CH
MOVE 0~9 NUMBER
Angle
2
1/3
Press the ANGLE button or …† buttons to select
the desired angle.
2
Press the …† buttons to select Zoom, and then
press the ENTER button.
( ) will be displayed.
3
Press the …† œ √ buttons to move to the area
you want to enlarge.
4
Press the ENTER button. The screen will be
enlarged to twice the normal size.
Using the ANYKEY button
Playback
1
Press the ANYKEY button during playback.
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:33
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
MOVE
2
D 2CH
CHANGE
Press the …† buttons to select Angle and press
the œ √ buttons or number(0~9) buttons to
select the desired angle.
If you press the ENTER button once again after the screen
is enlarged to twice the normal size, the screen size will be
enlarged to four times the normal size.
Off➞ 2X➞ 4X➞ 2X ➞ Off
DVD-VIDEO
Title
1/2
Chapter
1/20
Time
00:00:11
Subtitle
Off
ENG
Audio
Angle
Off
1/3
Zoom
Off
Repeat
MOVE
D 2CH
CHANGE
English - 63
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 64
Playing
Back a the
Bookmark
Selecting
Audio language
Using Bookmarks
This feature lets you bookmark sections of a DVD-Video,
DVD-RAM or DVD-R/-RW(V mode), so you can quickly find them.
Bookmarking with a DVD-Video/DVD-RAM/DVD-RW(Video mode)/DVD-R disc
(V mode)
1
1
Press the MARKER button during playback.
2
Press the œ √ buttons to select a bookmarked
scene.
Press the MARKER button during playback.
- - - - - - - - - --
Bookmark
MOVE
MOVE
2
1 2 - - - - - - - --
Bookmark
SELECT
PLAY
CANCEL
RETURN
RETURN
Press the MARKER button during
playback.Press the ENTER button when the
desired scene appears.
3
Press the ENTER or PLAY( ) button to start
playing from the selected scene.
The number 1 is displayed and the scene is memorized.
1 - - - - - - - - --
Bookmark
Playback
MOVE
3
PLAY
CANCEL
Clearing a Bookmark
1
Press the MARKER button during playback
2
Press the œ √ buttons to select a bookmarked
scene.
RETURN
Press the œ √ button to move to the next position.
Bookmark
4
1 2 3 4 5 6 - - - --
Press the ENTER button when the desired
scene appears.
The number 2 is displayed and the scene is memorized.
Bookmark
1 2 - - - - - - - --
MOVE
3
MOVE
PLAY
CANCEL
PLAY
CANCEL
RETURN
Press the CANCEL button to delete the
selected bookmark.
RETURN
Bookmark
1 2 - 4 5 6 - - - --
• Repeat above to bookmark other positions.
• You can bookmark up to 10 scenes.
■
NOTE
■
When the disc tray is opened and then
closed, bookmarks will disappear.
The button display may differ depending
on the disc type.
64 - English
MOVE
SELECT
RETURN
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 65
Playing Back a Marker
Using Markers
Marking with a DVD-RW(VR mode) disc
1
Press the MARKER button during playback.
2
Press the œ √ buttons to select a bookmarked
scene.
(VR mode)
1
Press the MARKER button during playback.
Marker
-- -- -- -- -- -- -- -- -- --
SELECT
2
N:0
RETURN
MOVE
Press the ENTER button when the desired scene
appears.
The number 01 is displayed and the scene is
memorized.
Marker
Marker
01 -- -- -- -- -- -- -- -- --
N:1
3
01 02 -- -- -- -- -- -- -- --
PLAY
CANCEL
N:2
RETURN
Press the ENTER or PLAY( ) button to start
playing from the selected scene.
• If you press the SKIP( )button, it moves to the beginning of
the marker. Pressing the button once again within 3 seconds
returns to the beginning of the previous marker.
• If you press the SKIP( )button, it moves to the next marker.
Clearing a Marker
MOVE
PLAY
CANCEL
RETURN
Press the œ √ button to move to the next position.
4
Press the ENTER button when the desired scene
appears.
The number 02 is displayed and the scene is memorized.
Marker
MOVE
01 02 -- -- -- -- -- -- -- --
PLAY
CANCEL
Press the MARKER button during playback.
2
Press the œ √ buttons to select a bookmarked
scene.
Press the CANCEL button to delete the selected
bookmark.
Marker
01 02 03 04 05 06 07 08 09 10 √ N : 10
Marker
01 02 03 04 05 06 07 08 09 --
N:2
N:9
RETURN
MOVE
• DVD-RW (VR Mode) discs have the Marker
function instead of the Bookmark function. The
Marker function allows you to mark up to 99
scenes. Since the scenes may be displayed as
many different pages, numbering is necessary. If a
disc in use is encoded with Disc Protect, Markers
cannot be set or deleted. Only playback is available.
PLAY
CANCEL
RETURN
• When a marker is cleared while DVD-RW (VR mode) is
playing, marker numbers will change. For example, if the
7th marker is cleared after ten markers are registered, the
marker numbers after the eighth will automatically move
ahead by one and the 8th marker becomes the 7th.
English - 65
Playback
3
1
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 66
Buttons on the Remote Control used for CD playback
Playing an Audio
CD/MP3 Disc
Playing an Audio CD (CD-DA)/MP3
$
*
^
%
&
^
Each disc has a variety of menu functions available.
Playing an Audio CD(CD-DA)
1
Insert an audio CD (CD-DA) into the disc tray.
CD
√ 0:00:01
TRACK 1
CDDA
PLAY MODE
Playback
@
!
Music List
TRACK 1
2
!
The audio CD menu appears and the tracks (songs) are
played automatically.
No.
Title
Length
001
002
TRACK 1
TRACK 2
00:03:50
00:04:00
003
004
005
006
007
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
00:03:49
00:03:47
00:04:29
00:03:44
00:03:44
MOVE
ENTER
RETURN
(
1. …† : Selects a track (song).
2. √ : Plays the selected track (song).
3. ENTER(
) button : Plays the selected track (song).
EXIT
Press the …† buttons to select the track you want to
hear, and then press the ENTER button or √ button.
4. SKIP(
) button : Plays the next track.
5. SKIP(
) button : Returns to the beginning of the
current track when pressed during
playback. If pressed again, your
DVD recorder moves to and plays
the previous track. If you press this
button within three seconds after
playback starts, the previous track
will be played.
If you press this button after three
seconds, the current track will be
replayed from the beginning.
Audio CD(CD-DA) Screen Elements
!
CD
@
Music List
TRACK 1
$
√ 0:00:01
TRACK 1
CDDA
PLAY MODE
01/15
No.
Title
Length
001
002
TRACK 1
TRACK 2
00:03:50
00:04:00
003
004
005
006
007
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
00:03:49
00:03:47
00:04:29
00:03:44
00:03:44
MOVE
ENTER
RETURN
EXIT
#
%
^
1. PLAY MODE icon
2. Current track (song) : Displays the number of the track
currently being played.
3. Displays the current play index and total track number.
4. Shows the operating state of a disc and the current
playback time.
5. Displays the track list (song list) and the playing time of
each track.
6. Button display.
66 - English
#
01/15
6. SEARCH(
7. STOP(
/
) button : Fast Play (X2, X4, X8)
) : Stops a track(song).
8. PLAY/PAUSE( ) : Plays a track(song) or pauses
playback.
9. ANYKEY: To select the top menu on screen display
(Repeat or Play Option).
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 67
Buttons on the Remote Control used for MP3 playback
Playing an MP3 Disc
1
Insert an MP3 disc into the disc tray.
And press the …† buttons to select Disc
Navigation, and then press the ENTER or √ button.
DVD-Recorder
Disc Navigation
MP3
Disc
Navigation
Photo
√
Timer Rec.
Music
√
%
*
^
&
Setup
MOVE
ENTER
RETURN
EXIT
$
!
2
Press the …† buttons to select Music, and then
press the ENTER or √ button.
The MP3 menu appears and the tracks(songs) are
played automatically.
MP3
!
√ 0:00:15
SONGO1
3.5MB
2004/08/26
MP3
PLAY MODE
(
01/11
No.
Title
001
002
ROOT
SONGO1
SONGO2
003
004
005
006
SONGO3
SONGO4
SONGO5
SONGO6
MOVE
ENTER
RETURN
1. …† : Selects a track (song).
2. √ : Plays the selected track (song).
3. ENTER( ) button : Plays back the selected track
(song) or displays the files in
the selected folder.
EXIT
Press the …† buttons to select the track (song) you
want to hear, and then press the ENTER button or √
button.
4. RETURN(
) button : Moves to the folder to which
the current song belongs.
) button : Plays the next track.
6. SKIP(
) button : Returns to the beginning of the
current track when pressed while
playing. If pressed again, your
DVD recorder moves to and
plays the previous track. If you
press this button within three
seconds, the previous track will
be played. If you press this
button after three seconds, the
current track will be replayed
from the beginning.
%
7. STOP(
) : Stops a track(song).
^
8. PLAY/PAUSE( ) : Plays a track(song) or pauses
playback.
9. ANYKEY : To select the top menu on screen display
(Repeat or Play Option).
!
MP3
Music List
01/11
SONGO1
$
√ 0:00:11
#
SONGO1
3.5MB
2004/08/26
MP3
PLAY MODE
No.
Title
001
002
ROOT
SONGO1
SONGO2
003
004
005
006
SONGO3
SONGO4
SONGO5
SONGO6
MOVE
ENTER
RETURN
EXIT
1. PLAY MODE icon
2. Current track (song) : Displays the name of the track
being played.
3. MP3 file information.
4. Shows the operating state of a disc and the current
playback time.
5. Displays the information for the folder and its tracks.
6. Button display.
English - 67
Playback
5. SKIP(
MP3 Screen Elements
@
#
Music List
SONGO1
3
@
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 68
Playing Repeatedly(Repeat Playback)
Select the desired repeat mode (TRACK or DISC)
using œ √ buttons, and then press the ENTER
button.
For MP3 discs, you can select Folder, Track or
Disc.
2
Using the REPEAT button
1
Press the REPEAT button during playback.
The TRACK repeat mode icon ( ) appears and the
selected track is played repeatedly.
CD
Music List
TRACK 1
Title
Length
001
TRACK 1
00:03:50
002
003
004
005
006
007
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
00:04:00
00:03:49
00:03:47
00:04:29
00:03:44
00:03:44
TRACK 1
CDDA
2
Select Off in play mode window using œ √ buttons,
and then press the ENTER button.
3
01/15
No.
√ 0:00:15
PLAY MODE
To return to normal playback
MOVE
ENTER
RETURN
EXIT
Press the REPEAT button once more to play the
entire disc repeatedly.
The DISC repeat mode icon ( ) appears and the
inserted disc is played repeatedly.
Play Option Mode
The Play Option can be used with an audio CD in the Play
or Stop mode.
Press the ANYKEY button in the Stop mode.
Play Option will be highlighted.
1
CD
Music List
TRACK 1
01/15
No.
CD
Music List
TRACK 1
01/15
No.
Title
Length
001
TRACK 1
00:03:50
002
003
004
005
006
007
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
00:04:00
00:03:49
00:03:47
00:04:29
00:03:44
00:03:44
» 0:00:19
TRACK 1
CDDA
Playback
PLAY MODE
MOVE
ENTER
RETURN
EXIT
To return to normal playback
3
Press the REPEAT button repeatedly until the
repeat mode icon disappears, or press the
CANCEL button.
Press the ANYKEY button during playback.
The play mode window appears.
CD
Music List
TRACK 1
01/15
No.
√ 0:00:20
TRACK 1
CDDA
PLAY MODE
68 - English
TRACK 1
CDDA
PLAY MODE
Length
001 MODE
TRACK 1
PLAY
002
TRACK 2
Repeat : Off
003
TRACK 3
Play option
:
Normal
004
TRACK 4
005
TRACK 5
006
TRACK 6
007
TRACK 7
MOVE
ENTER
00:03:50
00:04:00
00:03:49
00:03:47
00:04:29
00:03:44
00:03:44
RETURN
EXIT
• During Playback, Repeat Mode will be highlighted.
-1 Select a desired play option (Normal, Random, Intro
or Playlist) using the œ √ buttons. Press the
ENTER button.
2
• Normal : Tracks on a disc are played in the order in
which they were recorded on the disc.
Using the ANYKEY button
1
√ 0:00:01
Title
Title
Length
001 MODE
TRACK 1
PLAY
002
TRACK 2
Repeat : Off
003
TRACK 3
Play 004
option : TRACK
Normal4
005
TRACK 5
006
TRACK 6
007
TRACK 7
MOVE
ENTER
00:03:50
00:04:00
00:03:49
00:03:47
00:04:29
00:03:44
00:03:44
RETURN
EXIT
• Random : The Random option plays the disc’s tracks in
random order. After a random list is generated
and played completely, another random list is
generated and played.
Random Play is continued until the play option
is changed.
• Intro : The first 10 seconds of each track will be played. If
you want to listen to the music that you have
selected, press the ENTER button or PLAY( )
button. The play option will be changed to Normal
Play. When Intro Play is completed, Normal Play
is performed.
• Playlist : The Playlist playback option allows you to
select the order in which you want tracks to
play.
R135-XAA-ENG-56-72
2006.3.11
9:58 AM
Page 69
To Program Tracks
Playing a Picture Disc
You can register a maximum of 30 tracks in the playlist.
1
Press the ANYKEY button during playback, then
select Play option using …† buttons.
CD
Music List
TRACK 1
01/15
No.
0:00:01
TRACK 1
CDDA
PLAY MODE
2
Title
Length
001 MODE
TRACK 1
PLAY
002
TRACK 2
Repeat : Off
003
TRACK 3
Play option
004 : Normal
TRACK 4
005
TRACK 5
006
TRACK 6
007
TRACK 7
MOVE
ENTER
00:03:50
00:04:00
1
DVD-Recorder
00:03:49
00:03:47
00:04:29
00:03:44
00:03:44
RETURN
Select tracks in the order in which you want them to
play using the …† buttons.
Press the ENTER button.
2
TRACK 1
001
TRACK 1
TRACK 2
002
TRACK 3
TRACK 3
003
TRACK 4
CDDA
TRACK 4
004
TRACK 7
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
CDDA
ENTER
RETURN
EXIT
Press the …† buttons to select Disc Navigation, and
then press the ENTER or √ button.
Disc Navigation
JPEG
Disc
Navigation
Photo
√
Timer Rec.
Music
√
Setup
MOVE
ENTER
RETURN
EXIT
TRACK 8
PLAY MODE
MOVE
EXIT
ENTER
If you playlisted a wrong track, press the √ button,
then press the …† buttons to select wrong track and
press the CANCEL button.
The wrong track will be removed.
3
Press the …† buttons to select Photo, and then
press the ENTER or √ button.
4
Press the …† œ √ buttons to select a picture.
JPEG
JPEG01
CD
Photo List
01/08
Playlist
03/03
CDDA
TRACK 1
001
TRACK 1
CDDA
TRACK 2
002
TRACK 3
CDDA
TRACK 3
003
TRACK 4
CDDA
TRACK 4
CDDA
TRACK 5
CDDA
TRACK 6
CDDA
TRACK 7
CDDA
TRACK 8
PLAY MODE
MOVE
ENTER
CANCEL
ROOT
JPEG01
JPEG02
JPEG03
JPEG04
JPEG05
JPEG06
JPEG07
Slide Show
MOVE
ENTER
RETURN
EXIT
EXIT
• To see the next 8 pictures, press the SKIP(
) button.
• To see the previous 8 pictures, press the SKIP(
4
Press the PLAY(
) button.
) button to playback the playlist.
English - 69
Playback
3
√
DVD-Recorder
07/15
CDDA
√
Music
MOVE
Playlist
CDDA
Photo
Timer Rec.
EXIT
The Playlist screen will appear.
CDDA
Disc Navigation
JPEG
Disc
Navigation
Setup
Select Playlist using the œ √ buttons, and then
press the ENTER button.
CD
Insert an JPEG disc into the disc tray.
R135-XAA-ENG-56-72
2006.3.11
9:59 AM
-1 If you press the PLAY(
screen will appear.
Page 70
) button, the Slide show
5
Playing an MPEG4 Disc
The picture interval (Slide show speed) must be set.
DVD-RW(VR)
Slide Show Speed
Slow
Normal
MPEG4 File is used to contain the audio and video data.
MPEG4 File with following extensions can be played.
- .AVI, .DIVX, .avi, .divx
Fast
JPEG01
MOVE
PHOTO
ENTER
RETURN
1
Insert a MPEG4 Disc into the disc tray.
DVD-Recorder
-2 Press the ENTER button with a picture selected in
the Album screen. Select a display mode (Album
screen (
), Slide show (
), Rotation (
)
or Zoom (
)) using the œ √
buttons, then press the ENTER button.
5
CD
Disc
Navigation
Disc Navigation
DivX
√
Programme Photo
Music
Setup
DVD-RW(VR)
MOVE
2
√
√
ENTER
RETURN
EXIT
Press the …† buttons to select the Disc Navigation,
and then press the ENTER or √ button.
JPEG01
MOVE
PHOTO
ENTER
DVD-Recorder
RETURN
Playback
CD
Disc
Navigation
: Returns to the Album screen.
: The unit enters slide show mode.
Before the slide show can begin, the picture interval
(Slide show speed) must be set.
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
: Each time the ENTER button is pressed, the
picture is enlarged up to 4X.
(Normal ➞ 2X ➞ 4X ➞ 2X ➞ Normal)
Disc Navigation
DivX
√
Programme Photo
Music
Setup
MOVE
3
• Press the ANYKEY button to display or clear menus.
√
√
ENTER
RETURN
EXIT
Press the …† buttons to select the DivX, and then
press the ENTER or √ button.
CD
DivX
00/02
ROOT
No.
001
002
0:00:00
Title
ROOT
DIVX01
DIVX02
Size
70.8MB
73.6MB
MPEG4
ROOT
MOVE
70 - English
ENTER
RETURN
EXIT
4
Press the …† buttons to select the avi file (DivX),
then press the ENTER, √ or PLAY button.
5
When MPEG4 file is played, you can use following
functions.
Pressing the STOP button once during playback will
display the file list, pressing the button again will exit the
menu screen.
R135-XAA-ENG-56-72
2006.3.11
9:59 AM
Page 71
MPEG4 Function Description
Function
Description
Skip
( or )
During playback, press the SKIP ( or )
button, it moves forward or backward 5 minutes.
Search
( or )
During playback, press the SEARCH ( or )
button and press again to search at a faster speed.
(2X, 4X, 8X)
Using the MENU button
1
Press the MENU button.
DVD-Recorder
Title List
DVD-RW(VR)
Slow Motion In pause or step mode, press the SEARCH ( )
button on the remote control. (1/8X, 1/4X, 1/2X)
Play
Title List
Title List
√
Playlist
Disc Manager
Step Motion Press the STEP( ) button on the remote
Play
control in the still mode.
NOTE
■ This DVD Recorder can play the following video
compression formats,
- MPEG4 Codec format : DivX 3.11 DivX 4.x
DivX 5.x
- Audio format : .MP3, .MPEG, .PCM, .AC3
■ Supported subtitle file formats: .smi, .srt, .sub, .psb,
.txt, .ass (The subtitle file should have exactly the
same name to corresponding MPEG4 file name)
■ Some MPEG4 files created on a personal
computer may not be play back.
That is why Codec Type, Version and Higher
resolution over specification is not supported.
Timer Rec.
Setup
MOVE
2
ENTER
RETURN
EXIT
Press the …† buttons to select Title List, and then
press the ENTER or √ button twice.
The Title List screen is displayed.
DVD-RW(VR)
Title List
APR/19/2006
1/6
No.
APR/21/2006 12:00 AM CH1
APR/21/2006
SP
Playing the Title List
MOVE
3
Title
01 APR/19/2006
02 APR/19/2006
03 APR/20/2006
04 APR/20/2006
05 APR/21/2006
06 APR/21/2006
ENTER
LengthEdit
12:00
12:30
12:00
12:30
12:00
12:30
RETURN
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
EXIT
Press the …† buttons to select Title, and then
press the ENTER or √ button.
The Edit menu is displayed on the right.
Title List
APR/21/2006
5/6
No.
01 APR/19/2006
02 APR/19/2006
03 APR/20/2006
APR/21/2006 12:00 AM CH1 04 APR/20/2006
05 APR/21/2006
APR/21/2006
06 APR/21/2006
SP
Using the TITLE LIST button
1
LengthEdit
12:00
12:30
12:00
12:30
12:00
12:30
00:00:21
00:00:03
Play
00:00:15
Rename
00:00:16
Delete
00:06:32
Edit
00:08:16
Protection
√
√
√
√
√
√
Press the TITLE LIST button.
MOVE
The Title List screen is displayed.
DVD-RW(VR)
Title List
APR/19/2006
1/6
No.
Title
01 APR/19/2006
02 APR/19/2006
03 APR/20/2006
04 APR/20/2006
APR/19/2006 12:00 AM CH1
05 APR/21/2006
APR/19/2006
06 APR/21/2006
SP
MOVE
2
Title
ENTER
ENTER
RETURN
EXIT
(Rename, Delete, Edit, Protection : See pages 74~77)
LengthEdit
12:00
12:30
12:00
12:30
12:00
12:30
RETURN
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
√
√
√
√
√
√
EXIT
4
Press the …† buttons to select Play to play the title
list and then press the ENTER button.
The selected entry (title) will be played back.
√ Play
Press the …† buttons to select an entry you want to play
from Title List, and then press the PLAY( ) button.
The selected entry (title) will be played back.
3
To stop playing the title, press the STOP( ) button.
To return the title list screen, press the TITLE LIST button.
English - 71
Playback
DVD-RW(VR)
Follow these instructions to play back a scene from the Title List.
R135-XAA-ENG-56-72
2006.3.11
9:59 AM
Page 72
To view the current status of the disc and the
progress of playback : Press the INFO button, and
the information about the disc will appear.
DVD-RW(VR)
Disc Name
Disc
Total Title
Total Playlist
Recordable Time
Protection
Screen
6
2
00: 28 SP
Not Protected
Playback
Title List Screen Elements
# $
Disc Info
JAN 01 2006 SUN
DVD-Recorder
!
Press the INFO button once again. Then you can
check the information about the title under playback.
Playing Info
APR/01/2006 12:00 AM
CH11
5/6
APR/01/2006 12:00 AM
00: 01: 43 SP
00: 00: 08
Not Protected
JAN 01 2006 SUN
5
12:00 AM
To stop playing the title, press the STOP(
button.
)
Playback
You can also play a recorded program by
pressing the ANYKEY button during
playback.
DVD-RW(VR)
Title
10/19
Time
00: 00: 08
Subtitle
Off
Audio
ENG
Repeat
Off
Zoom
Off
MOVE
■
■
D 2CH
CHANGE
Press the …† buttons to select Title.
Press the œ √ or number buttons to select to
play the title list and then press the ENTER
button.
72 - English
LengthEdit
No. Title
ENTER
MOVE
RETURN
ENTER
EXIT
5/6
LengthEdit
12:00 00:00:21
12:30Play
00:00:03
12:00Rename
00:00:15
12:30 00:00:16
Delete
12:00 00:06:32
Edit
12:30 00:08:16
Protection
RETURN
√
√
√
√
√
√
EXIT
! Playback screen for recorded entries
@ Information window for the selected entry : Title
name, recording date, lock status, record mode
# Recorded entry No.
$ Recorded entry title
% Recording length (i.e., the playing time)
^ Title list edit items
Play : Plays the selected entry.
Rename : Renames the title of a selected entry.
Delete : Deletes the selected entry from the list.
Edit : Deletes a section.
Protection : Locks or unlocks the selected entry.
& Button display
■
NOTE
■
Title
Title List
^
&
To return the title list screen, press the TITLE LIST
button.
NOTE
5/6
√
01 APR/19/2006 12:00 00:00:21
01 APR/19/2006
√
02 APR/19/2006 12:30 00:00:03
02 APR/19/2006
√
03 APR/20/2006 12:00 00:00:15
03 APR/20/2006
√
04
APR/20/2006
12:30
00:00:16
04
APR/20/2006
01/APR/2006 12:00 AM CH1
APR/21/2006 12:00 AM CH1
√
05 APR/21/2006 12:00 00:06:32
05 APR/21/2006
01/APR/2006
APR/21/2006
√
06 APR/21/2006 12:30 00:08:16
06 APR/21/2006
XP
SP
MOVE
Title
Created Time
Length
Playing Time
Title Protection
Title List
DVD-RW(VR)
No.
@
DVD-RW(VR)
Name
DVD-Recorder
APR/21/2006
12:00 AM
%
■
This may depend on the the disc type.
DVD-R/DVD-RW(Video) has limited
editing function.
R135-XAA-ENG-73-90
2006.3.11
10:0 AM
Page 73
Editing
This section introduces basic functions of DVD
editing.
Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . .74
Advance Editing (Playlist) . . . . . . . . . . . . . . . . . . .78
Disc Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Recording or editing might not be completed if an
error such as a sudden power failure occurs.
Please be aware that material that has been
damaged cannot be retrieved.
English - 73
Editing
• Title List
A title is a section of recorded video and audio.
Title List shows a list to help you select a title.
Since the title list consists of the information on
stream that is actually recorded, if one title is deleted,
that title cannot be played again.
• Playlist
This refers to a unit of playback, which is made by
selecting a desired scene in the entire Title List.
When one playlist is played, only the scene selected
by the user will play and then stop. Since only the
information necessary for playing a desired scene is
included in a playlist, even if that playlist is deleted,
the original recorded title will not be deleted.
R135-XAA-ENG-73-90
2006.3.11
10:0 AM
Page 74
Rename
DVD-Recorder
Basic Editing (Title List)
DVD-RW(VR)
APR / 21 / 2006 12:00 AM CH11
Save
Back Space
MOVE
Renaming (Labeling) a Title
Follow these instructions to rename a title list entry, i.e.,
to edit the title of a recorded program.
4
Space
ENTER
Delete
Clear
RETURN
EXIT
Select the desired characters using the …† œ √
buttons, press the ENTER button.
DVD-Recorder
Rename
DVD-RW(VR)
Using the TITLE LIST button
1
Sports(A1)
Press the TITLE LIST button.
The Title List screen is displayed.
Save
Back Space
Or use the MENU button.
MOVE
• Press the MENU button.
• Press the …† buttons to select Title List, then
press the ENTER or √ button twice.
DVD-RW(VR)
1/6
No.
Title
LengthEdit
01 APR/19/2006
02 APR/19/2006
03 APR/20/2006
04 APR/20/2006
APR/19/2006 12:00 AM CH1
05 APR/21/2006
APR/19/2006
06 APR/21/2006
SP
MOVE
2
ENTER
12:00
12:30
12:00
12:30
12:00
12:30
RETURN
√
√
√
√
√
DVD-RW(VR)
5/6
APR/21/2006 12:00 AM CH1
APR/21/2006
Title
01 APR/19/2006
02 APR/19/2006
03 APR/20/2006
04 APR/20/2006
05 APR/21/2006
06 APR/21/2006
SP
5
ENTER
LengthEdit
12:00 00:00:21
12:30
Play00:00:03
12:00
00:00:15
Rename
12:30
00:00:16
Delete
12:00
Edit00:06:32
12:30 00:08:16
Protection
The changed title name is displayed on the title item of
the selected Title list entry.
RETURN
DVD-RW(VR)
01 APR/19/2006 12:00
02 APR/19/2006 12:30
03 APR/20/2006 12:00
04 APR/20/2006 12:30
05 Sports(A1)
06 APR/21/2006 12:30
√
√
√
√
Sports(A1)
APR/03/2006
SP
5/6
No.
APR/21/2006 12:00 AM CH1
APR/21/2006
SP
74 - English
ENTER
Title
01 APR/19/2006
02 APR/19/2006
03 APR/20/2006
04 APR/20/2006
05 APR/21/2006
06 APR/21/2006
Length Edit
12:00 00:00:21
12:30
Play 00:00:03
12:00
00:00:15
Rename
12:30
Delete00:00:16
12:00
Edit 00:06:32
12:30 00:08:16
Protection
RETURN
Title
Length Edit
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
EXIT
Title List
APR/21/2006
5/6
No.
√
The Rename screen is displayed.
DVD-RW(VR)
Title List
Sports(A1)
√
Press the …† buttons to select Rename, and then
press the ENTER or √ button.
MOVE
EXIT
Press the …† œ √ buttons to select Save, and then
press the ENTER button.
MOVE
3
Clear
RETURN
Title List
No.
MOVE
Delete
EXIT
Press the …† buttons to select an entry you want to
rename from the Title List, and then press the
ENTER or √ button.
APR/21/2006
Editing
√
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
00:08:16
ENTER
• Back Space : Deletes the character before the
cursor.
• Space : Enters a blank and moves the cursor one
forward (to the right).
• Delete : Deletes the character at the cursor
position.
• Clear : Deletes all the character inputs.
• Save : Registers the character inputs.
Title List
APR/19/2006
Space
EXIT
√
√
√
√
√
√
ENTER
RETURN
EXIT
√
√
√
√
√
√
R135-XAA-ENG-73-90
2006.3.11
10:0 AM
Page 75
Locking (Protecting) a Title
Follow these instructions to lock an entry to protect it
from accidental deletion.
4
Press the œ √ buttons to select On, and then press
the ENTER button. The key icon on the information
window for the selected entry changes to the locked
status. ( ➝ )
If you want to unlock the title entry, select the protected title
and set the Protection function to Off.
Using the TITLE LIST button
Title List
DVD-RW(VR)
Sports(A1)
1
5/6
No.
Title
Press the TITLE LIST button.
01
02
Drama
Music
The Title List screen is displayed.
03
Sports
04
Movie
05 Sports(A1)
06
Sports(A1)
Or use the MENU button.
APR/21/2006
• Press the MENU button.
• Press the …† buttons to select Title List, and then
press the ENTER or √ button twice.
Drama
APR/19/2006
MOVE
ENTER
Edu 1
Edit
00:00:21
00:00:03
√
√
00:00:15
00:00:16
00:06:32
√
√
√
00:08:16
√
RETURN
EXIT
Title List
DVD-RW(VR)
Drama
SP
Length
1/6
No.
Title
01
02
Drama
Music
Length
Edit
00:00:21
00:00:03
√
√
03
Sports
04
Movie
05 Sports(A1)
00:00:15
00:00:16
00:06:32
√
√
√
06
00:08:16
√
Edu 1
Deleting a Title
Follow these instructions to delete an entry from the Title List.
SP
MOVE
2
ENTER
RETURN
EXIT
Press the …† buttons to select an entry you want to
protect from the Title List, and then press the
ENTER or √ button.
DVD-RW(VR)
Title List
Sports(A1)
Sports(A1)
APR/21/2006
SP
MOVE
3
Using the TITLE LIST button
1
5/6
No.
Title
01
02
Drama
Music
03
Sports
04
Movie
05 Sports(A1)
06
ENTER
Edu 1
• Press the MENU button.
• Press the …† buttons to select Title List, and then
press the ENTER or √ button twice.
√
√
√
00:00:15
Rename
√
00:00:16
Delete
√
00:06:32
Edit
√
00:08:16
Protection
RETURN
The Title List screen is displayed.
Or use the MENU button.
Length Edit
00:00:21
00:00:03
Play
Press the TITLE LIST button.
Press the …† buttons to select Protection, and then
press the ENTER or √ button.
Drama
APR/19/2006
SP
DVD-RW(VR)
SP
MOVE
Title
Length
Edit
01
02
Drama
Music
00:00:21
00:00:03
√
√
03
Sports
04
Movie
05 Sports(A1)
00:00:15
00:00:16
00:06:32
√
√
√
06
00:08:16
√
Edu 1
MOVE
5/6
No.
Title
01
02
Drama
Music
03
Sports
04
Movie
05 Sports(A1)
06
ENTER
Edu 1
Length
Edit
00:00:21
00:00:03
Play
√
√
√
00:00:15
Rename
√
00:00:16
Delete
√
00:06:32
Edit
√
00:08:16
Protection
RETURN
EXIT
2
ENTER
RETURN
EXIT
Press the …† buttons to select an entry you want to
delete from the Title List, and then press the ENTER
or √ button.
DVD-RW(VR)
Title List
5/6
Sports(A1)
DVD-RW(VR)
Title List
Sports(A1)
5/6
Sports(A1)
Title Protection:
APR/21/2006
SP
Sports(A1)
On
No.
Title
01
02
Drama
Music
03
Sports
04
Movie
05 Sports(A1)
06
Edu 1
Length
Edit
00:00:21
00:00:03
Play
√
√
√
00:00:15
Rename
√
00:00:16
Delete
√
00:06:32
Edit
√
00:08:16
Protection
Off
MOVE
APR/21/2006
ENTER
RETURN
EXIT
SP
MOVE
ENTER
RETURN
EXIT
English - 75
Editing
APR/21/2006
1/6
No.
Title List
Sports(A1)
Sports(A1)
Title List
DVD-RW(VR)
Drama
EXIT
R135-XAA-ENG-73-90
3
2006.3.11
10:0 AM
Page 76
Press the …† buttons to select Delete, and then press
the ENTER or √button.
DVD-RW(VR)
Title List
APR/21/2006
SP
MOVE
Follow these instructions to delete a section of a Title List
entry.
5/6
Sports(A1)
Sports(A1)
Deleting a Section of a Title
No.
Title
01
02
Drama
Music
03
Sports
04
Movie
05 Sports(A1)
06
ENTER
Edu 1
Length
Edit
00:00:21
00:00:03
Play
√
√
√
00:00:15
Rename
√
00:00:16
Delete
√
00:06:32
Edit
√
00:08:16
Protection
RETURN
Using the TITLE LIST button
EXIT
You will be prompted with the confirmation message.
DVD-RW(VR mode): Since Playlist is present, the
message “Do you want to delete?(Related playlists may
be deleted.)” is displayed.
DVD-RW(VR)
(VR mode)
1
Or use the MENU button.
• Press the MENU button.
• Press the …† buttons to select Title List, and
then press the ENTER or √ button twice.
Title List
Sports(A1)
Press the TITLE LIST button.
The Title List screen is displayed.
5/6
Do you want to delete?
(Related playlists
may be deleted.)
Sports(A1)
Yes
1/6
No
APR/21/2006
SP
MOVE
ENTER
RETURN
EXIT
Drama
APR/21/2006
SP
DVD-RW(Video mode), DVD-R: Since Playlist is not
present, the message “Do you want to delete?” is
displayed.
• The message may be different depending on the
type of disc.
Title List
DVD-RW(VR)
Drama
MOVE
2
No.
Title
01
02
Drama
Music
Length
Edit
00:00:21
00:00:03
√
√
03
Sports
04
Movie
05 Sports(A1)
00:00:15
00:00:16
00:06:32
√
√
√
06
00:08:16
√
ENTER
Edu 1
RETURN
Press the …† buttons to select an entry you want to
edit from the Title List, and then press the ENTER or
√ button.
DVD-RW(VR)
4
Sports(A1)
APR/21/2006
Editing
NOTE
SP
You cannot delete a protected entry.
If you want to delete a protected entry, select
“Off” in the Title Protection menu.
■
Once an entry is deleted from the Title List, it
cannot be recovered.
■
Once a DVD-R or DVD-RW is finalized, it
cannot be deleted.
■
With DVD-R, titles are only deleted from the
menu, however, the Title remains physically
on the disc.
Title List
5/6
Sports(A1)
Press the œ √ buttons to select Yes, and then press
the ENTER button
■
MOVE
3
No.
Title
01
02
Drama
Music
03
Sports
04
Movie
05 Sports(A1)
06
ENTER
Edu 1
Length
Edit
00:00:21
00:00:03
Play
√
√
√
00:00:15
Rename
√
00:00:16
Delete
√
00:06:32
Edit
√
00:08:16
Protection
RETURN
EXIT
Press the …† buttons to select Edit, and then press
the ENTER or √ button.
Edit Title List
DVD-RW(VR)
Title List No. 05
Start
End
00:00:00
00:00:00
00:00:00
√
Start
End
MOVE
76 - English
EXIT
Delete
ENTER
Return
RETURN
EXIT
R135-XAA-ENG-73-90
4
2006.3.11
10:0 AM
Page 77
Press the ENTER button at the starting point.
6
The image and starting point time are displayed on the
section deletion starting point window.
Press the œ √ buttons to select Delete, and then press
the ENTER button.
The message “Do you want to delete?(Deleted part will
not be restored)” is displayed.
Edit Title List
DVD-RW(VR)
Edit Title List
DVD-RW(VR)
Title List No. 05
Start
End
Title List No. 05
Start
End
00:00:05
00:00:00
00:00:05
√
Start
End
MOVE
Delete
ENTER
00:00:05
Return
RETURN
00:10:15
Start
EXIT
End
Delete
MOVE
Edit Title List Screen Elements
➂
00:10:15
»
ENTER
Return
RETURN
EXIT
Edit Title List
DVD-RW(VR)
$
Title List No. 05
Start
End
Do you want to delete?
Edit Title List
DVD-RW(VR)
(Deleted part will not be restored.)
00:00:20
②
Title List No. 05
Start
End
Yes
Start
MOVE
00:00:05
①
Delete
ENTER
00:00:20
Return
RETURN
EXIT
00:00:00
00:00:05
√
Start
End
MOVE
Delete
ENTER
Return
RETURN
EXIT
7
1 Playback bar
2 Title List No.
3 Section deletion starting point window and time
4 Section deletion end point window and time
• Select the start and end points of the section
you want to delete using the playback related
buttons.
• Playback related buttons (
5
End
No
,
,
,
,
Press the ENTER button at the end point.
,
Press œ √ buttons to select Yes, and then press the
ENTER button.
The selected section is deleted.
To return to the Title List screen, press the œ √ buttons
to select Return.
The length of the section to be deleted must
be at least 5 seconds long.
)
■
If the length of the section to be deleted is
less than 5 seconds, you will be prompted
with the message “The range is too short.”.
■
If the end time precedes the starting point,
you will be prompted with the message “End
point cannot be marked earlier than start
point”.
■
The section cannot be deleted when it
includes a still picture.
■
Press the MENU button after the operation
has finished.
The Edit Title List screen will disappear.
The image and end point time are displayed in the
Section deletion ending point window.
Edit Title List
DVD-RW(VR)
Title List No. 05
Start
End
00:00:05
Start
MOVE
00:10:15
00:10:15
»
End
Delete
ENTER
Return
RETURN
EXIT
English - 77
Editing
■
NOTE
R135-XAA-ENG-73-90
2006.3.11
10:0 AM
Page 78
• The yellow-colored selection bar moves to the End
item.
Advanced Editing
(Playlist)
• Select the starting point of the section from which
you want to create a new scene using the playback
,
).
related buttons ( , , ,
,
,
Creating a Playlist
Follow these instructions to create a new playlist entry from
a recorded title.
5
Press the ENTER button at the end point.
DVD-Recorder
Make Scene
DVD-RW(VR)
Scene No. 001
Start
End
(VR mode)
Title List : 1/6
00:00:10
00:10:00
»
1
With the unit in Stop mode, press the MENU button
on the remote control.
2
Press the …† buttons to select Playlist, and then
press the ENTER or √ button.
DVD-Recorder
Playlist
DVD-RW(VR)
Title List
New Playlist
√
Playlist
Edit Playlist
√
Start
Timer Rec.
ENTER
RETURN
A new Scene will be added to the current Playlist.
A new Make Scene screen is displayed.
Repeat the above steps to create further scenes.
■
3
NOTE
■
The Make Scene screen is displayed.
DVD-Recorder
EXIT
To make a new playlist
Press the œ √ buttons to select Make, and then
press the ENTER button.
EXIT
Press the …† buttons to select New Playlist, and
then press the ENTER or √ button.
Return
RETURN
• The yellow-colored selection bar moves to the Make
item.
Setup
MOVE
Make
ENTER
• The image and end point time are displayed on the
End window.
6
Disc Manager
End
MOVE
00:10:00
If you want to make a new playlist, go to
MENU ➞ new playlist.
You can check and see all the scenes on
Edit Playlist screen.
Make Scene
DVD-RW(VR)
Scene No. 001
Start
End
Title List 1/6
00:00:00
00:00:00
√
To return to Edit Playlist menu
7
The Edit Playlist screen is displayed.
00:00:00
Start
End
MOVE
Make
ENTER
Press the œ √ buttons to select Return, and then
press the ENTER button.
Return
RETURN
DVD-RW(VR)
EXIT
Edit Playlist
1/5
Editing
APR/23/2006
No.
4
Press the ENTER button at the start point.
DVD-Recorder
APR/23/2006 12:00 AM
1 Scene
APR/23/2006 12:00 AM
Make Scene
Title
01 APR/23/2006
02 APR/23/2006
03 APR/24/2006
04 APR/24/2006
05 APR/25/2006
LengthEdit
12:00
12:30
12:00
12:30
12:00
00:00:21
00:00:03
00:00:15
00:00:16
00:06:32
√
√
√
√
√
DVD-RW(VR)
MOVE
Scene No. 001
Start
End
Title List 1/6
00:00:10
00:00:00
00:00:10
√
Start
MOVE
End
Make
ENTER
RETURN
EXIT
RETURN
EXIT
■
You can create up to 99 playlist entries.
■
Depending on the disc type, the displayed
screen may look slightly different.
■
Press the MENU or PLAY LIST button after
the operation has finished.
The Edit Playlist screen will disappear.
Return
• The image and starting point time are displayed on
the Start window.
78 - English
NOTE
ENTER
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 79
3
Playing Entries in the Playlist
Press the …† buttons to select Play, and then select
the ENTER button.
The playlist entries will be played.
Follow these instructions to play the playlist entries.
DVD-RW(VR)
Edit Playlist
3/5
APR/24/2006
(VR mode)
1
No.
With the unit in stop mode, press the PLAY LIST
button.
APR/24/2006 12:00 AM
1 Scene
APR/24/2006 12:00 AM
The Edit Playlist screen is displayed.
MOVE
DVD-RW(VR)
01 APR/23/2006
02 APR/23/2006
03 APR/24/2006
04 APR/24/2006
05 APR/25/2006
Length Edit
12:00 00:00:21
12:30Play
00:00:03
12:00Rename
00:00:15
12:30Edit
00:00:16
Scene
12:00Copy
00:06:32
√
√
√
√
√
Delete
RETURN
EXIT
Edit Playlist
1/5
APR/23/2006
No.
APR/23/2006 12:00 AM
1 Scene
APR/23/2006 12:00 AM
MOVE
ENTER
Title
ENTER
Title
01 APR/23/2006
02 APR/23/2006
03 APR/24/2006
04 APR/24/2006
05 APR/25/2006
√ Play
Length Edit
12:00
12:30
12:00
12:30
12:00
RETURN
00:00:21
00:00:03
00:00:15
00:00:16
00:00:32
√
√
√
√
√
EXIT
Or use the MENU button.
• Press the MENU button in the stop mode.
• Press the …† buttons to select Playlist, and then
press the ENTER or √ button.
• Press the …† buttons to select Edit Playlist, and
then press the ENTER or √ button.
• To view the current status of the disc and the
progress of playback : Press the INFO button,
and the information about the disc will appear.
DVD-RW(VR)
Disc Name
DVD-Recorder
Disc Info
Playlist
Total Title
Total Playlist
Recordable Time
Protection
Screen
DVD-RW(VR)
Title List
New Playlist
√
Playlist
Edit Playlist
√
Disc Manager
JAN 01 2006 SUN
19
5
01: 09 XP
Not Protected
Playback[Playlist]
12:00 AM
Timer Rec.
Setup
MOVE
2
ENTER
RETURN
EXIT
• Press the INFO button once again. Then you can
check the information about the playlist currently
being played back.
Press the …† buttons to select the title you want to
edit from the Playlist, and then press the ENTER or
√ button.
DVD-RW(VR)
Name
Playlist
Created Time
Length
Playing Time
Total scene
JAN 01 2006 SUN
Playing Info
APR 24 2006 12:00 AM
CH11
3/5
APR 24 2006 12:00 AM
00: 01: 36 XP
00: 00: 15
1
12:00 AM
• The screen returns to the Edit Playlist screen
when the playback has finished.
4
Press the STOP( ) button to stop playing.
The screen returns to the Edit Playlist screen.
English - 79
Editing
The Edit Playlist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete.
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 80
4
Renaming a Playlist Entry
Follow these instructions to rename a playlist entry,
i.e. to edit the title of a playlist entry.
Enter the desired characters using the …† œ √
buttons.
DVD-Recorder
Rename
DVD-RW(VR)
Dolphin
(VR mode)
1
With the unit in stop mode, press the PLAY LIST
button.
Save
The Edit Playlist screen is displayed.
DVD-RW(VR)
1/5
No.
APR/23/2006 12:00 AM
1 Scene
APR/23/2006 12:00 AM
MOVE
Title
01 APR/23/2006
02 APR/23/2006
03 APR/24/2006
04 APR/24/2006
05 APR/25/2006
ENTER
Length Edit
12:00
12:30
12:00
12:30
12:00
00:00:21
00:00:03
00:00:15
00:00:16
00:00:32
RETURN
√
√
√
√
5
EXIT
• Press the MENU button in the stop mode.
• Press the …† buttons to select Playlist, and then
press the ENTER or √ button.
• Press the …† buttons to select Edit Playlist, and
then press the ENTER or √ button.
Press the …† buttons to select the title you want to
edit from the Playlist, and then press the ENTER or
√ button.
The Edit Playlist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete.
DVD-RW(VR)
Edit Playlist
APR/24/2006
3/5
No.
APR/24/2006 12:00 AM
1 Scene
APR/24/2006 12:00 AM
Editing
MOVE
3
Title
01 APR/23/2006
02 APR/23/2006
03 APR/24/2006
04 APR/24/2006
05 APR/25/2006
Length Edit
12:00 00:00:21
12:30
Play 00:00:03
12:00
00:00:15
Rename
12:30
Edit 00:00:16
Scene
12:00
Copy00:00:32
√
√
√
√
√
Delete
ENTER
RETURN
EXIT
Press the …† buttons to select Rename, and then
press the ENTER button.
DVD-RW(VR)
Edit Playlist
APR/24/2006
3/5
No.
APR/24/2006 12:00 AM
1 Scene
APR/24/2006 12:00 AM
MOVE
80 - English
ENTER
Title
01 APR/23/2006
02 APR/23/2006
03 APR/24/2006
04 APR/24/2006
05 APR/25/2006
Length Edit
Play
12:00 00:00:21 √
Rename
12:30 00:00:03 √
Edit Scene
12:00 00:00:15 √
Copy
12:30 00:00:16 √
Delete
12:00 00:00:32 √
RETURN
EXIT
MOVE
ENTER
Delete
Clear
RETURN
EXIT
√
Or use the MENU button.
2
Space
• This function is the same as the Rename function in
renaming the title list. (See page 74.)
• The maximum number of characters that can be
entered is 31. All 31 characters can be displayed
by pressing the INFO button.
Edit Playlist
APR/23/2006
Back Space
Press the …† œ √ buttons to select Save, and then
press the ENTER button.
The changed title name is displayed on the title item of
the selected playlist entry.
DVD-RW(VR)
Edit Playlist
Dolphin
3/5
No.
Dolphin
1 Scene
APR/24/2006 12:00 AM
MOVE
ENTER
Title
01 APR/23/2006
02 APR/23/2006
03 Dolphin
04 APR/24/2006
05 APR/25/2006
Length Edit
12:00 00:00:21 √
12:30 00:00:03 √
00:00:15 √
12:30 00:00:16 √
12:00 00:00:32 √
RETURN
EXIT
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 81
Editing a Scene for the Playlist
DVD-Recorder
DVD-RW(VR)
Scene No.
1/7
Edit Scene
Playlist No.
Follow these instructions to edit scenes for a playlist
3
Play
Modify
01 00:00:26
02 00:00:07
03 00:00:04
04 00:00:03
05 00:00:11
06 00:00:04
Move
Add
(VR mode)
MOVE
1
ENTER
Delete
RETURN
EXIT
With the unit in stop mode, press the PLAY LIST
button.
The Edit Playlist screen is displayed.
DVD-RW(VR)
Edit Playlist
Science
1/4
No.
Title
01
02
03
04
Science
Sky
Dolphin
Natural
Length Edit
00:00:17
00:00:06
00:00:06
00:00:37
√
√
√
4
Science
7 Scene
APR/24/2006 10:43 AM
MOVE
Playing a Selected Scene
√
ENTER
RETURN
Press the …† œ √ buttons to select the scene you
want to play, and then press the ENTER button.
The playlist entry to be played is selected.
EXIT
Or use the MENU button.
DVD-Recorder
DVD-RW(VR)
Scene No.
2/7
• Press the MENU button in the stop mode.
• Press the …† buttons to select Playlist, and then
press the ENTER or √ button.
The Edit Playlist menu is displayed:Play, Rename, Edit
Scene, Copy, Delete.
3
Modify
01 00:00:26
02 00:00:07
03 00:00:04
04 00:00:03
05 00:00:11
06 00:00:04
Move
Add
MOVE
Press the …† buttons to select the title you want to
edit from the Playlist, and then press the ENTER or
√ button.
Playlist No.
Play
• Press the …† buttons to select Edit Playlist, and
then press the ENTER or √ button.
2
Edit Scene
5
ENTER
Delete
RETURN
EXIT
Press the ENTER button.
The selected scene is played.
√ Play
DVD-RW(VR)
Edit Playlist
Dolphin
3/4
No.
Title
01
02
03
04
Science
Sky
Dolphin
Natural
Length Edit
Play
00:00:17 √
Rename
00:00:06 √
Edit Scene
00:00:06 √
Copy
00:00:37 √
Delete
Dolphin
7 Scene
APR/24/2006 10:43 AM
ENTER
RETURN
EXIT
• To stop scene play, press the STOP(
3
) button.
Press the …† buttons to select Edit Scene, and then
press the ENTER button.
The Edit Scene screen is displayed.
DVD-RW(VR)
Edit Playlist
Dolphin
3/4
No.
Title
01
02
03
04
Science
Sky
Dolphin
Natural
Dolphin
7 Scene
Length Edit
Play
00:00:17 √
Rename
00:00:06 √
Edit00:00:06
Scene √
Copy
00:00:37 √
Delete
APR/24/2006 10:43 AM
MOVE
ENTER
RETURN
EXIT
English - 81
Editing
MOVE
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 82
Modifying a Scene (Replacing a Scene)
7
Press the ENTER button at the end point of the
scene.
DVD-Recorder
To setup, follow steps 1 to 3 in page 81.
Modify Scene
DVD-RW(VR)
Scene No. 002
Start
End
4
Press the …† œ √ buttons to select the scene you
want to modify, and then press the ENTER button.
Title List : 5/6
Start
DVD-Recorder
DVD-RW(VR)
Scene No.
2/7
Edit Scene
Playlist No.
00:00:25
00:00:30
00:00:30
»
End
Change
MOVE
ENTER
Cancel
RETURN
EXIT
3
Play
• The image and ending point time are displayed on
the End window.
Modify
01 00:00:26
02 00:00:07
03 00:00:04
04 00:00:03
05 00:00:11
06 00:00:04
Move
Add
MOVE
5
ENTER
RETURN
Delete
EXIT
Press the …† buttons to select Modify, and then
press the ENTER button.
8
Press the œ √ buttons to select Change, and then
press the ENTER button.
DVD-Recorder
DVD-RW(VR)
Scene No.
2/7
Edit Scene
Playlist No.
3
Play
Modify
DVD-Recorder
Modify Scene
01 00:00:26
02 00:00:07
03 00:00:04
04 00:00:03
05 00:00:11
06 00:00:04
DVD-RW(VR)
Add
Scene No. 002
Start
End
MOVE
Title List : 5/6
00:00:00
00:00:00
End
MOVE
6
Change
ENTER
Cancel
RETURN
EXIT
Press the ENTER button at the start point of the
scene.
DVD-Recorder
Modify Scene
DVD-RW(VR)
Scene No. 002
Start
End
Title List : 5/6
00:00:25
Editing
00:00:00
00:00:25
√
Start
MOVE
End
Change
ENTER
Cancel
RETURN
EXIT
• The image and starting point time are displayed
on the Start window.
• Select the starting or ending point of the
section you want to modify using the playback
related buttons ( , , ,
,
, , ).
82 - English
ENTER
RETURN
Delete
EXIT
00:00:00
√
Start
Move
• The scene you want to modify is changed with the
selected section.
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 83
Moving a Scene (Changing the Position of a Scene)
■
NOTE
Depending disc type, the displayed screen
may look slightly different.
To setup, follow steps 1 to 3 in page 81.
4
Press the …† œ √ buttons to select the scene you
want to move (change the position), and then press
the ENTER button.
Adding a Scene
To setup, follow steps 1 to 3 in page 81.
DVD-Recorder
DVD-RW(VR)
Scene No.
3/7
Edit Scene
Playlist No.
3
Play
4
Modify
01 00:00:26
02 00:00:07
03 00:00:04
A yellow selection window is displayed on the scene to
be added as the new scene.
Move
Add
04 00:00:03
05 00:00:11
MOVE
ENTER
Press the …† œ √ buttons to select the scene that
will have a new scene inserted before it, and then
press the ENTER button.
Delete
06 00:00:04
RETURN
DVD-Recorder
DVD-RW(VR)
Scene No.
4/7
EXIT
Edit Scene
Playlist No.
3
Play
5
Press the …† buttons to select Move, then press the
ENTER button.
Modify
01 00:00:26
02 00:00:07
03 00:00:04
04 00:00:03
05 00:00:11
06 00:00:04
Move
Add
DVD-Recorder
Edit Scene
Delete
DVD-RW(VR)
Scene No.
3/7
Playlist No.
MOVE
3
ENTER
RETURN
EXIT
Play
Modify
01 00:00:26
02 00:00:07
03 00:00:04
Move
5
Add
04 00:00:03
05 00:00:11
MOVE
ENTER
Delete
06 00:00:04
RETURN
EXIT
Press the …† buttons to select Add, then press the
ENTER button.
DVD-Recorder
Add Scene
DVD-RW(VR)
Scene No. 004
Start
End
• A yellow selection window is displayed on the scene to
be moved.
Title List : 4/6
6
Press the …† œ √ buttons to select the position to
which you want to move the selected scene, and
then select the ENTER button.
DVD-Recorder
00:00:00
00:00:00
Start
End
MOVE
Add
ENTER
Cancel
RETURN
EXIT
Edit Scene
DVD-RW(VR)
Scene No.
00:00:00
√
6/7
Playlist No.
3
Play
6
Press the ENTER button at the starting point of the
scene.
Modify
01 00:00:26
05 00:00:11
MOVE
ENTER
03 00:00:04
Move
DVD-Recorder
Add
DVD-RW(VR)
Add Scene
Scene No. 004
Start
End
Delete
06 00:00:04
RETURN
EXIT
Title List : 4/6
• The selected scene is moved to the selected position.
00:00:00
00:00:15
Start
MOVE
DVD-Recorder
00:00:15
√
End
Add
ENTER
Cancel
RETURN
EXIT
Edit Scene
DVD-RW(VR)
Scene No.
5/7
Playlist No.
Play
Modify
01 00:00:26
02 00:00:04
03 00:00:03
Move
Add
04 00:00:11
MOVE
05 00:00:04
ENTER
06 00:00:04
RETURN
Delete
3
• The image and starting point time are displayed on
the Start window.
• Select the end point of the section where you want
to add the new scene using the playback related
buttons ( , ,
).
,
,
,
,
EXIT
English - 83
Editing
04 00:00:03
02 00:00:07
R135-XAA-ENG-73-90
7
2006.3.11
10:1 AM
Page 84
Press the ENTER button at the end point of the scene.
DVD-Recorder
Add Scene
Copying a Playlist Entry to the
Playlist
DVD-RW(VR)
Scene No. 004
Start
End
Using the PLAY LIST button
Title List : 4/6
00:00:15
00:00:35
00:00:35
»
Start
End
Add
MOVE
ENTER
Cancel
RETURN
1
EXIT
• The image and end point time are displayed in the
End window.
Press the PLAY LIST button.
The Edit Playlist screen is displayed.
DVD-RW(VR)
Edit Playlist
1/4
Science
• To cancel, press the œ √ buttons to select Cancel
and then press the ENTER button.
8
Press the œ √ buttons to select Add, and then press
the ENTER button.
DVD-Recorder
No.
Title
Length Edit
01
Science
00:00:17
√
02
Sky
00:00:06
√
03
Dolphin
00:00:06
√
04
Natural
00:00:37
√
Science
1 Scene
APR/23/2006 06:43 AM
Edit Scene
MOVE
ENTER
RETURN
EXIT
DVD-RW(VR)
Scene No.
4/8
Playlist No.
3
Play
Or use the MENU button.
Modify
01 00:00:26
02 00:00:07
03 00:00:04
• Press the MENU button in the stop mode.
• Press the …† buttons to select Playlist, and
then press the ENTER or √ button.
• Press the …† buttons to select Edit Playlist,
and then press the ENTER or √ button.
Move
Add
04 00:00:20
05 00:00:03
MOVE
ENTER
Delete
06 00:00:11
RETURN
EXIT
• The section you want to add is inserted prior to the
scene selected in step 4.
Deleting a Scene
2
The Edit Playlist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete
To setup, follow steps 1 to 3 in page 81.
4
Press the …† œ √ buttons to select the scene you
want to delete, and then press the ENTER button.
DVD-Recorder
Press the …† buttons to select the title you want to
copy to the Playlist, and then press the ENTER or √
button.
DVD-RW(VR)
Edit Playlist
3/4
Dolphin
Edit Scene
DVD-RW(VR)
Scene No.
2/7
Playlist No.
3
No.
Title
01
Science
02
Sky
03
Dolphin
04
Natural
Length Edit
Dolphin
7 Scene
APR/23/2006 06:43 AM
Play
02 00:00:07
03 00:00:04
Move
MOVE
√
√
√
√
Copy
Delete
Modify
01 00:00:26
00:00:17
00:00:06
Play
00:00:06
Rename
00:00:37
Edit Scene
ENTER
RETURN
EXIT
Editing
Add
04 00:00:03
05 00:00:11
MOVE
5
ENTER
Delete
06 00:00:04
RETURN
EXIT
3
Press the …† buttons to select Delete, and then press
the ENTER button.
DVD-Recorder
Edit Scene
Playlist that has been selected will be copied.
DVD-RW(VR)
Edit Playlist
Dolphin
DVD-RW(VR)
Scene No.
Press the …† buttons to select Copy, and then
press the ENTER button.
2/6
Playlist No.
3/4
3
Play
Modify
01 00:00:26
03 00:00:04
04 00:00:03
Move
Add
05 00:00:11
MOVE
84 - English
06 00:00:04
ENTER
06 00:00:05
RETURN
No.
Title
01
Science
02
Sky
03
Dolphin
04
Natural
Dolphin
7 Scene
APR/23/2006 06:43 AM
Length Edit
Play
00:00:17 √
Rename
00:00:06 √
Edit Scene
00:00:06 √
Copy
00:00:37 √
Delete
Delete
EXIT
MOVE
ENTER
RETURN
EXIT
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
DVD-RW(VR)
Edit Playlist
5/5
Dolphin
No.
Dolphin
7 Scene
APR/23/2006 06:43 AM
MOVE
■
NOTE
■
Page 85
01
02
03
04
05
ENTER
Title
Length Edit
Science
Sky
Dolphin
Natural
Dolphin
00:00:17
00:00:06
00:00:06
00:00:37
00:00:06
RETURN
3
√
Press the …† buttons to select Delete, and then
press the ENTER button.
DVD-RW(VR)
√
Edit Playlist
5/5
Dolphin
√
√
No.
√
01
02
03
04
05
EXIT
Dolphin
7 Scene
APR/23/2006 06:43 AM
MOVE
The playlist can contain up to 99 playlist
entries (titles).
Press the MENU button after the operation
has finished.
The Edit Playlist screen will disappear.
Title
Length Edit
Science
Sky
Dolphin
Natural
Dolphin
00:00:17
Play00:00:06
00:00:06
Rename
00:00:37
Edit Scene
00:00:06
Copy
ENTER
RETURN
EXIT
5/5
MOVE
Edit Playlist
No.
Science
1 Scene
APR/23/2006 06:43 AM
01
02
03
04
05
ENTER
Title
Science
Sky
Dolphin
Natural
Dolphin
No
RETURN
EXIT
Press the œ √ buttons to select Yes, and then press
the ENTER button.
You automatically returned to the Edit Playlist screen
after the deletion operation has finished.
DVD-RW(VR)
00:00:17
00:00:06
00:00:06
00:00:37
00:00:06
Dolphin
RETURN
√
5/5
√
Deleting...
(Please wait)
√
√
Dolphin
7 Scene
APR/23/2006 06:43 AM
EXIT
MOVE
The Edit Playlist menu is displayed : Play, Rename, Edit
Scene, Copy, Delete.
ENTER
RETURN
EXIT
Edit Playlist
DVD-RW(VR)
Natural
4/4
No.
01
02
03
04
Title
Science
Sky
Dolphin
Natural
Length Edit
00:00:17
00:00:06
00:00:06
00:00:37
√
√
√
√
Natural
1 Scene
APR/23/2006 06:43 AM
MOVE
ENTER
RETURN
EXIT
Edit Playlist
5/5
Dolphin
No.
Dolphin
7 Scene
APR/23/2006 06:43 AM
ENTER
01
02
03
04
05
Title
Science
Sky
Dolphin
Natural
Dolphin
Length Edit
00:00:17
Play00:00:06
00:00:06
Rename
00:00:37
Edit Scene
00:00:06
Copy
√
√
√
√
√
Delete
RETURN
EXIT
English - 85
Editing
Press the …† buttons to select the title you want to edit
from the Playlist, and then press the ENTER or √ button.
DVD-RW(VR)
Edit Playlist
√
• Press the MENU button in the stop mode.
• Press the …† buttons to select Playlist, and then
press the ENTER or √ button.
• Press the …† buttons to select Edit Playlist, and
then press the ENTER or √ button.
MOVE
ENTER
Length Edit
Or use the MENU button.
2
4
Yes
1/5
Science
MOVE
√
Do you want to delete?
Using the PLAYLIST button
DVD-RW(VR)
√
Edit Playlist
DVD-RW(VR)
Dolphin
7 Scene
APR/23/2006 06:43 AM
The Edit Playlist screen is displayed.
√
• You will be prompted with the delete confirmation
message “Do you want to delete?”.
Deleting a Playlist Entry from the
Playlist
With the unit in Stop mode, press the PLAY LIST
button.
√
Delete
Dolphin
1
√
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 86
4
Disc Manager
Enter the desired characters using the …† œ √
buttons.
DVD-Recorder
Rename
DVD-RW(VR)
Disc
Editing the Disc Name
Save
Back Space
Follow these instructions to give a name to a disc.
MOVE
1
Title List
DVD-RW(VR)
Title List
Title List
√
ENTER
Delete
Clear
RETURN
EXIT
• This function is the same as the Rename function in
renaming the title list. (See page 74.)
• The maximum number of characters that can be
entered is 31. All 31 characters can be displayed by
pressing the INFO button.
With the unit in Stop mode, press the MENU button
on the remote control.
DVD-Recorder
Space
5
Press the …† œ √ buttons to select Save, and then
press the ENTER button.
A disc name is given to the disc.
Playlist
Disc Manager
Timer Rec.
DVD-Recorder
Setup
MOVE
ENTER
RETURN
EXIT
Title List
Disc Name : Disc
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Timer Rec.
Setup
2
Disc Manager
DVD-RW(VR)
Press the …† buttons to select Disc Manager, then
press the ENTER or √ button.
DVD-Recorder
MOVE
ENTER
RETURN
EXIT
Disc Manager
DVD-RW(VR)
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Timer Rec.
Setup
Editing
MOVE
3
ENTER
RETURN
EXIT
Press the …† buttons to select Disc Name, then
press the ENTER or √ button.
The Rename screen is displayed.
DVD-Recorder
Rename
DVD-RW(VR)
Save
Back Space
MOVE
86 - English
Space
ENTER
Delete
RETURN
Clear
EXIT
■
You may need to clear disc protect before
beginning editing.(see page 87.)
■
Depending on the kind of disc, the displayed
screen may be different.
NOTE
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 87
Disc Protection
DVD-Recorder
Disc Manager
DVD-RW(VR)
Disc Protection allows you to protect your discs from
being formatted or deleted due to unintended
operations
Title List
Disc Name :
√
Playlist
Disc Protection : Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Timer Rec.
Setup
MOVE
1
ENTER
RETURN
EXIT
With the unit in Stop mode, press the MENU button
on the remote control.
Formatting a Disc
DVD-Recorder
Title List
DVD-RW(VR)
Title List
Title List
√
Use these instructions to format a disc.
The disc protection should be cleared.
Playlist
Disc Manager
Timer Rec.
Setup
MOVE
ENTER
RETURN
EXIT
1
With the unit in Stop mode, press the MENU button
on the remote control.
DVD-Recorder
2
Press the …† buttons to select Disc Manager, and
then press the ENTER or √ button.
Title List
√
Disc Manager
Disc Manager
Timer Rec.
DVD-RW(VR)
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Timer Rec.
Setup
MOVE
ENTER
RETURN
EXIT
Setup
MOVE
2
DVD-RW(VR)
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Timer Rec.
Setup
ENTER
RETURN
EXIT
Press the …† buttons to select Protected, then
press the ENTER button.
DVD-Recorder
Disc Manager
DVD-RW(VR)
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Disc Manager
Disc Format : DVD-VRProtected
√
Disc Finalize
√
Delete All Title Lists
√
ENTER
Not Protected
RETURN
Setup
MOVE
3
ENTER
RETURN
EXIT
Press the …† buttons to select Disc Format, and
then press the ENTER or √ button.
DVD-Recorder
Disc Manager
DVD-RW(VR)
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Setup
Disc Protection :
MOVE
√
Disc Protection : Not Protected
√
Playlist
Setup
Disc Name :
Playlist
Timer Rec.
Disc Name :
Timer Rec.
Title List
√
Title List
Disc Manager
MOVE
ENTER
RETURN
EXIT
EXIT
English - 87
Editing
MOVE
EXIT
Press the …† buttons to select Disc Manager, and
then press the ENTER or √ button.
Timer Rec.
Disc Name :
RETURN
DVD-RW(VR)
Disc Manager
Title List
ENTER
DVD-Recorder
Press the …† buttons to select Disc Protection,
then press the ENTER or √ button.
DVD-Recorder
4
Title List
Playlist
DVD-Recorder
3
Title List
DVD-RW(VR)
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 88
DVD-RW
• You will be prompted with the confirmation message
“Choose the recording format for DVD- RW”
2
Press the …† buttons to select Disc Manager, and
then press the ENTER or √ button.
DVD-Recorder
DVD-Recorder
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
√
Timer Rec.
Disc Finalize
√
√
Delete All Title Lists
√
DVD-RW(VR)
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
Format : format
DVD-VR
ChooseDisc
the recording
for DVD-RW
Disc Manager
Disc Finalize
Timer Rec.
Delete
All Title Lists
DVD-VR
DVD-V
Setup
Setup
√
√
MOVE
MOVE
4
ENTER
RETURN
3
• You will be prompted again with the message “All
data will be deleted. Do you want to continue?”
Disc Protection : Not Protected
Disc Manager
All data
will :be
deleted.
Disc
Format
DVD-VR
Do you want to continue?
Disc Finalize
Timer Rec.
Setup
Delete
Yes All Title Lists
No
MOVE
5
ENTER
RETURN
√
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Setup
√
√
MOVE
√
EXIT
DVD-Recorder
RETURN
EXIT
Disc Manager
DVD-RW(VR)
DVD-VR and DVD-V are defined according to their
recording format.
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc
Format
: DVD-VR
Do you
want
to delete
all title lists?
Disc Manager
Disc Finalize
Timer Rec.
Delete
Yes All Title Lists
No
Setup
DVD-V
DVD-RW
DVD-RW
ENTER
• You will be prompted with the confirmation message
“Do you want to delete all title lists?”.
The disc is formatted.
DVD-VR
Disc Manager
Title List
Timer Rec.
Press the œ √ buttons to select Yes, and then press
the ENTER button.
DISC
Press the …† buttons to select Delete All Title
Lists, and then press the ENTER or √ button.
√
Playlist
EXIT
DVD-RW(VR)
Disc Manager
Disc Name :
RETURN
DVD-Recorder
DVD-RW(VR)
Title List
ENTER
EXIT
Press the œ √ buttons to select desired mode, then
press the ENTER button.
DVD-Recorder
Disc Manager
DVD-RW(VR)
Disc Manager
MOVE
ENTER
RETURN
√
√
√
EXIT
DVD-R
• When Protected Entry exists: The Delete All Title List
function will not operate. If you want to delete a
protected entry, disable Protection for it on the Lock
item. (See page 73)
Deleting All Title Lists
Editing
The disc protection should be cleared first.
4
Press the œ √ buttons to select Yes, and then press
the ENTER button.
All title lists are deleted.
1
With the unit in Stop mode, press the MENU
button on the remote control.
DVD-Recorder
Title List
DVD-RW(VR)
Title List
Title List
√
Playlist
Disc Manager
Timer Rec.
Setup
MOVE
88 - English
ENTER
RETURN
EXIT
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 89
You will be prompted with the message “Do you want
to finalize disc?”.
Finalizing a Disc
After you record titles onto a DVD-RW/DVD-R disc with
your DVD recorder, it needs to be finalized before it can
be played back on external devices.
DVD-Recorder
Disc Manager
DVD-RW(VR)
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
DVD-VRdisc?
youFormat
want to: finalize
Disc Manager DoDisc
Disc Finalize
Timer Rec.
Delete
Yes All Title Lists
No
Setup
1
With the unit in Stop mode, press the MENU button
on the remote control.
DVD-Recorder
MOVE
Title List
Title List
RETURN
√
√
EXIT
If you select Yes, you will be prompted again with the
message “Disc will be finalized. Do you want to
continue?”.
DVD-RW(VR)
Title List
ENTER
√
√
Playlist
Disc Manager
Timer Rec.
DVD-Recorder
Setup
MOVE
ENTER
RETURN
EXIT
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc
will be: finalized.
Disc
Format
DVD-VR
Do you want to continue?
Disc Finalize
Timer Rec.
Setup
2
Disc Manager
DVD-RW(VR)
Press the …† buttons to select Disc Manager, and
then press the ENTER or √ button.
DVD-Recorder
Delete
Yes All Title Lists
No
MOVE
ENTER
RETURN
√
√
√
EXIT
Disc Manager
DVD-RW(VR)
Title List
Disc Name :
√
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
Delete All Title Lists
√
Timer Rec.
Setup
MOVE
ENTER
RETURN
4
Press the œ √ buttons to select Yes, and then press
the ENTER button.
The disc is finalized.
EXIT
Once a disc is finalized, you cannot delete
entries from the record list.
3
Press the …† buttons to select Disc Finalize, and
then press the ENTER or √ button.
■
After being finalized, the DVD-R/DVDRW(video mode) operates in the same
manner as a regular DVD disc and is
playable in standard DVD players.
DVD-Recorder
Disc Manager
DVD-RW(VR)
Title List
Disc Name :
√
■
Depending on disc type, the displayed
screen may appear slightly different.
Playlist
Disc Protection : Not Protected
√
Disc Manager
Disc Format : DVD-VR
√
Disc Finalize
√
■
Finalizing time may be different depending
on the amount of data recorded on the disc.
Delete All Title Lists
√
Timer Rec.
Setup
■
Data on the disc will be damaged if the
recorder is powered off during finalizing
process.
MOVE
ENTER
RETURN
DVD-Recorder
EXIT
Disc Manager
DVD-R(V)
Title List
Disc Name :
√
Disc Manager
Disc Protection : Not Protected
√
Disc Finalize
√
Delete All Title Lists
√
Timer Rec.
Setup
MOVE
ENTER
RETURN
EXIT
English - 89
Editing
■
NOTE
R135-XAA-ENG-73-90
2006.3.11
10:1 AM
Page 90
Unfinalizing a Disc (V/VR mode)
4
Press the œ √ buttons to select Yes, and then press
the ENTER button.
The disc is unfinalized.
1
With the unit in Stop mode, press the MENU button
on the remote control.
DVD-Recorder
■
NOTE
Unfinalize
DVD-RW(V)
Additional recording, protection
Operation Same as DVD-Video
and deletion are possible.
Title List
DVD-RW(VR:F)
Title List
A DVD-RW can be finalized or unfinalized in
Video mode.
Mark
Title List
√
Playlist
Disc Manager
Finalize
DVD-Video(RW)
Timer Rec.
Setup
■
MOVE
2
ENTER
RETURN
EXIT
Press the …† buttons to select Disc Manager, and
then press the ENTER or √ button.
DVD-Recorder
Operation
Title List
Disc Name :
√
Playlist
Disc Format : DVD-VR
√
Disc Manager Disc Unfinalize
√
Timer Rec.
Setup
MOVE
ENTER
RETURN
EXIT
Press the …† button to select Disc Unfinalize, and
then press the ENTER or √ button.
You will be prompted with the message “Do you want to
unfinalize disc?”.
Disc Manager
DVD-Recorder
DVD-RW(VR:F)
Title Menu
Disc Name :
√
Disc Menu
Disc Format : DVD-VR
√
you want
to unfinalize disc?
Unfinalize
Disc ManagerDo Disc
√
Timer Rec.
Editing
Setup
MOVE
Yes
No
ENTER
RETURN
EXIT
If you select Yes, you will be prompted again with the
message “Disc will be unfinalized. Do you want to
continue?”.
Disc Manager
DVD-Recorder
DVD-RW(VR:F)
Title Menu
Disc Name :
√
Disc Menu
Disc Format : DVD-VR
√
Disc Manager
Disc
DiscUnfinalize
will be unfinalized.
√
Timer Rec.
Setup
MOVE
90 - English
Mark
Disc Manager
DVD-RW(VR:F)
3
A DVD-RW can be finalized or unfinalized in
VR mode.
Do you want to continue?
Yes
No
ENTER
RETURN
EXIT
Finalize
Unfinalize
DVD-RW(VR:F)
DVD-RW(VR)
Additional recording,
Additional recording,
deletion, editing, and
deletion, editing, and
protection are impossible. protection are possible.
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 91
Additional
Information
Troubleshooting
If your product malfunctions, go through the
checkpoints below before contacting a Samsung
authorized service center.
Power
The input is displayed for a while when the
power is turned on.
Checkpoint 1
The DVD recorder requires some time
to initialize and the input will be
displayed for approx. 10 seconds after
it is turned on.
Recording
Cannot record TV programs.
Checkpoint 1
Check whether the power cord is
securely plugged into the power outlet.
Checkpoint 2
Did you set the DVD recorder channel
settings correctly?
Checkpoint 3
Check the free space on your DVDRW/DVD-R discs.
I pressed the REC button but there is no response.
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Recording is possible for DVD-RW/
DVD-R discs only. If a program is copy
protected, it cannot be recorded.
Solutions to Error Message . . . . . . . . . . . . . . . . . .95
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
English - 91
Additional
Information
Checkpoint 1
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 92
Playback
Cannot play the disc.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Check whether the disc is inserted
correctly with the label facing up.
You cannot use this operation or
function due to one of the following
reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support
this feature (for example: angles)
(3) The feature is not available at the
moment.
(4) You've requested a title, chapter, or
scan time that is out of range.
Additional
Information
The disc does not support all selected
functions. In this case, some settings
configured in the settings menu may
not work properly.
Cannot change the aspect ratio.
Checkpoint 1
The angle operation is available only
when the disc contains images
captured from different angles.
This DVD recorder cannot play some
types of discs. (See pages 5, 56.)
Play mode settings are different from the settings
configured in the Settings menu.
Checkpoint 1
Checkpoint 1
Check the regional code of the DVD
disc.
icon appears on the screen.
Checkpoint 1
The angle operation does not work while playing a
DVD disc.
The aspect ratio is fixed for DVD
discs. (See page 36.)
92 - English
The selected audio and/or subtitle language is not
played.
Checkpoint 1
Audio and subtitle languages are discspecific. Only the sound and subtitle
languages contained on the DVD disc
are available and displayed in the disc
menu.
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 93
Video
Timer Recording
The disc revolves, but no image or bad quality
images are displayed.
Timer lamp flickers.
Checkpoint 1
Check whether there is damage to or
any foreign material on your disc.
Checkpoint 2
Some low quality discs may not play
properly.
Checkpoint 3
Checkpoint 1
Check if there is enough space in the
disc for recording.
Checkpoint 2
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Timer recording does not work properly.
Sound
Checkpoint 1
Re-check the recording time and the
end time settings again.
Checkpoint 2
Recording will be cancelled, if the
power is disconnected due to a
power failure or other similar reason,
while recording.
No sound.
Checkpoint 1
Are you watching a program in scan
mode?
If you are playing a program at a
speed other than normal and fast1
speed, the sound will not be heard.
Checkpoint 2
Check the connections and settings.
Checkpoint 3
Check whether the disc is damaged.
Clean the disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
HDMI
No HDMI output.
Checkpoint 1
Check the Video output is HDMI
enabled.
Checkpoint 2
Check the connection between the
TV and the HDMI jack of the DVD
Recorder.
Checkpoint 3
See if your TV supports this
480p/720p/1080i DVD Recorder.
No audio output.
Checkpoint 1
Abnormal HDMI output screen.
Checkpoint 1
If snow noise appears on the screen,
it means that TV does not support
HDCP (High-bandwidth Digital
Content Protection).
English - 93
Additional
Information
Check whether you have selected
the correct digital output options in
the Audio Output Options menu.
(See page 34~35.)
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 94
HDMI output Jitter
Other
I forgot my password for parental supervision.
Checkpoint 1
Check your TV system setup
correctly.
Checkpoint 2
Screen Jitter may occur when the
frame rate is converted from 50Hz to
60Hz for 720p/1080i HDMI (High
Definition Multimedia Interface)
Output.
Checkpoint 3
Please refer to the user's manual of
your TV.
Remote Control Unit
Checkpoint 1
Press the ( ) and ( ) buttons on
your DVD recorder simultaneously
when the power is on. All settings
including the password will revert to
the factory settings. Do not use this
unless absolutely necessary.
(Note that this function is possible only
when no disc is inserted.)
Is it possible to change a subtitle and an audio
signal on a recorded disc?
The remote control doesn't work.
Checkpoint 1
Point the remote control at the remote
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder
and the remote control.
Checkpoint 2
Check whether the batteries are
empty.
Additional
Information
Checkpoint 1
94 - English
A recorded disc is played with only
the subtitle and the audio signal
which were selected during recording.
Other problems
Checkpoint 1
Read the table of contents and then
find and read the section describing
your problem, and follow the
instructions given.
Checkpoint 2
Turn your DVD recorder off and on.
Checkpoint 3
If the problem still persists, contact a
nearby Samsung service center.
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 95
Solution to Error Message
Before contacting a Samsung authorized service center, perform the following simple checks.
Error Message
You cannot record a copy protected movie.
Solution / Explanation
You can’t record the video since it is protected by copyright.
Disc you are using is protected. To record on this disc or
use this function, cancel the disc protection function. Refer
to page 87.
The disc does not match the regional code for your area
and cannot be played on this device.
Make sure there are no scratches or dirt on the disc.
The disc is PAL format and cannot be played on this
unit.
Make sure there are no scratches or dirt on the disc.
You can’t use the disc because it contains errors from
previous recordings.
Use the disc after formatting.
You cannot record. This disc is protected.
This disc cannot be formatted (the disc is
protected).
This disc cannot be renamed
(the disc is protected).
The disc cannot be finalized (the disc is
protected).
This [Menu] is not available (the disc is
protected).
The disc cannot be played,
Please check the regional code of the disc.
This disc cannot be formatted.
Please check the disc.
You could not format the disc
because of error detection.
You could not finalize the disc
because of error detection.
You could not unfinalize the disc
because of error detection.
The disc cannot be played,
Please check the TV system.
The disc can be neither played nor recorded.
The disc cannot be played, Please check the disc.
English - 95
Additional
Information
If the disc has invalid information,
no more titles can be recorded.
Please format the disc beforehand.
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 96
Solution to Error Message
Error Message
Solution / Explanation
You can’t use the disc because it contains errors from
previous recordings.
Use the disc after formatting.
When operating, errors happen. Turn off the device.
(To turn off, press and hold the power button on the front
of the device for 10 seconds.)
After turning off, press the Open button and remove the
disc from the device.
Make sure the DV device is connected properly to the DV
connection Jack.
If it is connected properly, turn it off and on once again.
Error is detected on the disc.
System error is found.
Please try it again after turning off the power.
The DV device is not connected.
If you are unable to solve the problem after reading the above instructions, note:
The model and serial number on the rear of your DVD Recorder
The warranty information
A clear description of the problem
Additional
Information
Then contact your nearest SAMSUNG authorized service center. Call 1-800-SAMSUNG for a center near you.
96 - English
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 97
Specifications
Power requirements
120V AC, 60Hz
Power consumption
19 Watts
5.5 lb
Weight
General
16.9 in(W) x 8.5 in(D) x 1.9 in(H)
Dimensions
Operating temp.
+41°F to +95°F
Other conditions
Keep level when operating. Less than 75% operating humidity
1.0 V p-p at 75Ω load, sync negative
Video (1,2)
S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ω load)
Audio(1,2)
Max.Audio Input Level : 2Vrms
DV Input
IEEE 1394(4p) compatible jack
Input
Regular TV broadcasting: VHF (2~13), UHF (14~69)
Receivable Channels
Cable TV broadcasting: 1~125
Analog output jacks 1, 2
Optical/Coaxial digital audio output
Audio
Full scale Analog output level : 2Vrms
Output
Video output jack 1
S-Video output 1 (Y:1.0Vp-p, C:0.286Vp-p at 75Ω load)
Video
Component output 1 (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75Ω load)
HDMI/DVI output 1 (480p, 720p, 1080i)
Picture Compression format
MPEG-II
Audio Compression format
Dolby Digital 2ch/256kbps
Recording
XP (about 8 Mbps), SP (about 4 Mbps), LP (about 2 Mbps),
Recording Quality
EP (about 1.2 Mbps or about 0.8 Mbps)
Audio Frequency Response
For DVD discs, audio signals recorded at 96kHz sampling
frequency are converted and output at 48kHz.
Disc Type
DVD
AUDIO CD(CDDA)
Analog Audio Output
48 / 96kHz
44.1kHz
Digital Audio Output
48kHz
44.1kHz
Additional
Information
Audio Output
20 Hz ~ 20 kHz
English - 97
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 98
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA,
INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is
warranted by SAMSUNG against manufacturing defects in materials and workmanship for the following
limited warranty period:
One (1) Year Parts / Ninety Days (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and
used in the United States, and does not include transportation, installation, removal or reinstallation.
Warranty repairs must be performed by SAMSUNG’s authorized service center. To receive warranty
service, the original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG
or SAMSUNG’s authorized service center. Transportation to and from the service center is the
responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned
parts, if found to be defective during the limited warranty period specified above. The product must be
returned during the warranty period with transportation charges prepaid to SAMSUNG’s designated service
center. Prior to returning any product for warranty service, the purchaser must contact SAMSUNG for
problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free
operation of the product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
Additional
Information
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,
noncommercial use of this product and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; applications and uses for which this product was not intended; failures
or problems which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse,
abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage,
fluctuations or surges; damage caused by improper or faulty installation; improper connection with any
peripheral; product alteration or modification; improper or unauthorized repair; cosmetic damage or exterior
finish; product with altered serial numbers; failure to follow operating instructions, customer adjustments,
maintenance and environmental instructions that are covered and prescribed in the instruction book; use of
non-SAMSUNG or unauthorized parts, supplies, accessories or equipment which damage this product or
result in service problems; failures or problems due to incompatibility with other equipment.
98 - English
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 99
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Region
North America
Latin America
Europe
CIS
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
INDIA
Asia Pacific
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
Middle East & Africa
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
Customer Care Center ☎
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (0,15€/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282
1600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
Web Site
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.ru
www.samsung.com/ur
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
R135-XAA-ENG-91-100
2006.3.11
10:2 AM
Page 100
HEADQUARTERS
105 Challenger Road, Ridgefield Park,
N.J.07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-7267864)
www.samsung.com
US
AK68-01049A-00