Sharp HT-SB60 Specifications

ENGLISH
MODEL
HT-SB60
SOUND BAR HOME THEATER SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
HT-SB60 Sound Bar Home Theater system consisting of HT-SB60 (sound bar system) and CP-SW60 (active
subwoofer system).
3D
AUDIO
TREBLE
BASS
Note:
This product is recommended for flat panel TV (LED, LCD and plasma).
TINSEA417AWZZ
12/8/30
EA417EN HT-SB60_Front.fm
12K R AS 1
Accessories
IO
BA
SS
TR
EB
LE
AUD
3
D
The following accessories are included.
Remote Control
Subwoofer Stand x 2
Wall Mount Angle x 2
Pattern Paper
Audio Cable x 1
HDMI Cable x 1
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar) x 1
Special Notes
Warning:
● When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the
timer mode or remote control.
● This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
● To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the
apparatus.
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS, the Symbol,
& DTS and the Symbol together are registered
trademarks & DTS Digital Surround and the DTS logos
are trademarks of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
E-2
2012 September 5
HT-SB60
1
2
3
4
5
6
7
1
9
Precautions
● Do not remove the outer cover, as this may result
General
● Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
10 cm of free space along the sides, top and back of
the equipment.
●
10 cm
10 cm
10 cm
10 cm
●
●
10 cm
10 cm
●
●
in electric shock. Refer internal service to your
local SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
This unit should only be used within the range of 5°C 35°C (41°F - 95°F).
SHARP is not responsible for damage due to improper
use. Refer all servicing to a SHARP authorised service
centre.
Warnings:
● The voltage used must be the same as that specified on
10 cm
● Use the unit on a firm, level surface free from vibration.
● Keep the unit away from direct sunlight, strong
●
●
●
●
●
●
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
If your system does not work properly, disconnect the
AC power lead from the wall socket and replug.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
● In case of repairing, please bring the entire system set
to the service centre.
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels.
Controls and indicators
2
1
3
4
5
6
7
8
9
10
Sound Bar Front Panel
Reference page
1. Left Channel Speakers
2. Right Channel Speakers
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . 10, 13
4. SOURCE Button . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
5. Pairing Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
E-3
2012 September 5
HT-SB60
Reference page
6. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Demo Indicator. . . . . . . . . . . . . . . . . . . . . . . . 10, 14
8. Sound Mode Button. . . . . . . . . . . . . . . . . . . . 11, 13
9. Volume Down Button . . . . . . . . . . . . . . . . . . . . . 11
10. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . 11
1
2
3
4
5
6
7
8
9
Controls and indicators (continued)
Display
1
Subwoofer
FRONT VIEW
2
DIGITAL
REAR VIEW
1
3
3
DIGITAL
2
Reference Page
1. Dolby Digital Indicator . . . . . . . . . . . . . . . . . . . . . 12
2. DTS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Muting Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4
PAIRING
AC INPUT
5
Reference page
1. Power/Pairing Indicator . . . . . . . . . . . . . . . . . . . 10
2. Bass Reflect Duct
3. Woofer
4. Pairing button . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sound Bar Rear Panel
6
4 5
2 3
1
Reference page
1. HDMI OUT (TV ARC) socket. . . . . . . . . . . . . . . . . 8
2. HDMI IN 1 socket . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. HDMI IN 2 socket . . . . . . . . . . . . . . . . . . . . . . . . . 8
E-4
2012 September 5
HT-SB60
Reference page
4. Optical IN socket . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Audio IN Terminal . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1
2
3
4
5
6
7
1
9
Controls and indicators (continued)
Remote Control
1
Reference page
1. Remote Control Transmitter. . . . . . . . . . . . . . . . 10
2. TV ARC Button. . . . . . . . . . . . . . . . . . . . . . . . . 8, 12
3. Music (Sound Mode) Button. . . . . . . . . . . . . . . . 11
4. Cinema (Sound Mode) Button . . . . . . . . . . . . . . 11
5. Sport (Sound Mode) Button . . . . . . . . . . . . . . . . 11
6. BYPASS Button . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. 3D AUDIO Button. . . . . . . . . . . . . . . . . . . . . . . . . 12
8. APC Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. TV Operation Button . . . . . . . . . . . . . . . . . . . . . . 12
10. AV SYNC Down Button . . . . . . . . . . . . . . . . . . . . 11
11. Source Button . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
12. Subwoofer Level Down Button . . . . . . . . . . . . . 11
13. Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
14. On/Stand-by Button. . . . . . . . . . . . . . . . . . . . . . . 10
15. Game (Sound Mode) Button . . . . . . . . . . . . . . . . 11
16. News (Sound Mode) Button . . . . . . . . . . . . . . . . 11
17. Night (Sound Mode) Button . . . . . . . . . . . . . . . . 11
18. Dimmer Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
20. MUTE/Speaker Output Selection
Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
21. AV SYNC Up Button . . . . . . . . . . . . . . . . . . . . . . 11
22. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . 11
23. Subwoofer Level Up Button . . . . . . . . . . . . . . . . 11
24. Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
25. Volume Down Button . . . . . . . . . . . . . . . . . . . . . 11
14
2
3
4
15
16
5
6
7
17
18
19
20
AUDIO
8
9
21
10
11
22
23
12
24
25
13
TV Operation Buttons (Only SHARP TV):
On/Stand-by Sets the TV Input Select
Button
power to
Button (TV)
“ON” or
“STAND-BY”.
Press the
button to
switch the
input source.
Channel Up
and Down
Buttons
Turn up/
down the TV
volume.
Switch up/
down the TV
channels.
Volume Up
and Down
Buttons
Note:
Some models of SHARP TV may not be operable.
E-5
2012 September 5
HT-SB60
1
2
3
4
5
6
7
8
9
Sound bar preparation
To mount the sound bar on the wall
4 Screw the wall mount angle to the wall as shown in
Caution:
● Be very careful to prevent the sound bar 3.6 kg from falling
when mounting on the wall.
● Before mounting, check the wall strength. (Do not put
on the veneer plaster or whitewashed wall. The sound
bar may fall.) If unsure, consult a qualified service
technician.
● Mounting screws are not supplied. Use appropriate
ones.
● Check all wall mount angle screws for looseness.
● Select a good location. If not, accidents may occur or
the sound bar may get damaged.
● SHARP is not responsible for accidents resulting
from improper installation.
the illustration. (Total screw is 8 pieces)
Wall mount angle
Wall mount
angle
Wall
(screws x 4) surface
Wall surface
(screws x 4)
Wall
mount
angle
Wall surface
Note:
Make sure all screws are fully tightened. (screws are not
supplied)
Driving screws
Installing the sound bar
SHARP designed the sound bar so you may hang them on
the wall. Use proper screws (not supplied). See below for
size and type.
1 Align the wall mount slot at the sound bar to the
wall mount angle.
2 Slot the sound bar into the wall mount angle.
3 Fix them securely.
3.2 mm
5 mm
9 mm
Wall surface
Min. 22 mm
Fixing wall mount angle
(Horizontal position)
1 Fix the pattern paper to the wall in horizontal
position as below.
926 mm
Wall surface 44 mm
44 mm
29 mm
Falling prevention
29 mm
Pattern paper
Safety wires (not supplied) are useful to prevent the sound
bar from falling off the table.
2 Make a hole on the wall following the screw point
marks on the pattern paper by using a drill.
32 mm
8-9 mm
Wall surface
3 Fix a wall mount plug (not supplied) into the hole
using a hammer, until it is flush with the wall
surface.
32 mm
8-9 mm
Loop the safety wires (not supplied) into each hole as
shown and tie the safety wires to the LCD TV stand.
Wall surface
E-6
2012 September 5
HT-SB60
1
2
3
4
5
6
7
1
9
Placing the system
Notes:
Installation image:
● As the sound from the system is omni-directional, you can
place the sound bar anywhere you like. However, it is
recommended to place it as close to the TV as possible.
● The front panel of the sound bar is not removable.
TV
Caution:
● Do not change the installation direction when the sound
bar is turned on.
● Do not stand or sit on the sound bar and subwoofer as
you may be injured.
Placing the stand
Place the stand as shown.
Sound Bar
DVD player
VCR
Subwoofer
Place the system as shown.
Remove the protective film covering the sound bar and
subwoofer before turn on the system.
Stand
System connections
Make sure to unplug the AC power lead before making any connections.
Sound Bar
PAIRING
Wall socket
AC 220 - 240 V ~ 50/60 Hz
AC INPUT
Wall socket
AC 220 - 240 V ~ 50/60 Hz
Subwoofer
Sound bar and Subwoofer connection
Caution
● Do not allow any objects to fall into or to be placed in the bass reflex duct.
● Do not stand or sit on the sound bar/subwoofer. You may be injured.
E-7
2012 September 5
HT-SB60
1
2
3
4
5
6
7
8
9
System connections (continued)
HDMI Connection
Caution:
Turn off all other equipment before making this connection.
The illustration below shows the flows of the signals.
Audio and Video signal
DVD/Blu-ray
TV
Digital tuner
1. Method 1
This connection is for HDMI TV with ARC (Audio Return Channel).
TV
To HDMI (TV ARC) input terminal
DVD, Blu-ray disc
player or similar
To HDMI output
terminal
To HDMI input
terminal
Sound Bar
To HDMI OUT (TV ARC) output terminal
2. Method 2
This connection is for HDMI TV without ARC (Audio Return Channel).
To HDMI input terminal
TV
DVD, Blu-ray disc
player or similar
To audio output terminal
To Headphone
terminal
To HDMI output
terminal
Sound Bar
To HDMI OUT (TV ARC) output terminal
To HDMI input terminal
To select HDMI 1, 2 or TV ARC function (Source):
Press SOURCE button repeatedly until “HDMI 1”, “HDMI 2” or “TV ARC” appears on the display, or
press TV ARC button on the remote control to select the TV ARC.
Notes:
● This sound bar supports HDMI which enables ARC (Audio Return Channel).
● To enable ARC make sure to use High Speed HDMI™ cable (with ARC).
● This ARC feature requires TV that supports ARC. Refer the operation manual of the TV to determine which terminal supports ARC.
● To listen to the sound from a non-ARC-compatible TV, connect the audio output from TV to this system’s. (refer page 9)
● This sound bar can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC
(Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation manual of
the respective component on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming for the
CEC. For SHARP LCD TV, it is named as AQUOS LINK.
● CEC is not available during Low power consumption mode.
● To listen to the sound from this system, you will need to press and hold the
(MUTE) button (refer page 12) or adjust
the speaker output settings within the TV menu.
For details, refer to the operation manual of the TV.
● If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV, it is named as AQUOS
AUDIO SP), turn the CEC OFF and ON again.
● To enjoy 3D images, this system must be connected to a 3D-compatible TV and components (3D BD player, etc.) via High Speed
HDMI cables. Put on the 3D glasses, otherwise 3D images may not be viewed properly.
● If you want to use HDMI IN 1 socket, please use the supplied HDMI cable.
E-8
2012 September 5
HT-SB60
1
2
3
4
5
6
7
1
9
Audio connections to TVs, DVD players, VCRs, etc.
Other connection (without HDMI)
The illustration below shows the flows of audio and video signals.
Audio signal
Video signal
TV
DVD/Blu-ray
Disc Player
Digital tuner, etc.
Notes:
● Refer to the operation manual of the equipment to be connected.
● Fully insert the plugs to avoid fuzzy pictures or noises.
● Connecting via this method may disable TV internal speakers.
● In some cases, a small background noise could emit from the sound bar, when you use the RCA audio output terminal
connection from a TV-Set/DVD/Blu-ray Disc Player. In such case, please change the connection to the HDMI/ARC or
headphone terminal connection. This effect depends on the used TV/DVD/Blu-ray Disc Player-Brand, model and age,
and it is not a quality matter from the sound bar.
Connecting a TV, or DVD player, etc.
Connect to the TV using an optical digital cable or an audio cable.
TV
To audio output terminals
or
To optical
digital audio
output
terminal
Optical digital
audio cable
(commercially
available)
Audio signal
Blu-Ray/
DVD player/Digital
Tuner
To
HEADPHONE
terminal
Audio cable
(commercially
available)
To OPTICAL
IN (optical)
input terminal
To AUDIO IN
input terminals
Sound Bar
To select OPTICAL function:
Press SOURCE button repeatedly until “OPTICAL” appears on the display.
To select AUDIO IN function:
Press SOURCE button repeatedly until “AUDIO IN” appears on the display.
E-9
2012 September 5
HT-SB60
Note:
Make sure that the audio cable end
with ferrite core is connected to the
sound bar AUDIO IN terminal.
Ferrite core
1
2
3
4
5
6
7
8
9
Remote control
General control
Battery installation
1 Open the battery cover.
2 Insert the supplied battery according to the terminal
indicated in the battery compartment.
When inserting or removing the battery, push it towards
the
battery terminals.
3 Close the battery cover.
Caution:
● Remove the battery if the sound bar will not be used for
a long period of time. This will prevent potential damage
due to battery leakage.
● Do not use rechargeable battery (nickel-cadmium
battery, etc.).
● Installing the battery incorrectly may cause the sound
bar to malfunction.
● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
Notes concerning use:
● Replace the battery if the operating distance is reduced
or if the operation becomes erratic. Purchase a “AA”
size battery (UM/SUM-3, R6, HP-7 or similar).
● Periodically clean the transmitter on the remote control
and the sensor on the sound bar with a soft cloth.
● Exposing the sensor on the sound bar to strong light
may interfere with operation. Change the lighting or the
direction of the sound bar.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
AUDIO
Make sure to enable the HDMI CEC when making
HDMI connection. For details, refer to the operation
manual of the TV.
To turn the power on
Press the ON/STAND-BY button on the sound bar or the
remote control.
● The power turns on and the subwoofer indicator turns
blue. If the power does not turn on, check whether the
AC power lead is plugged in properly.
● The system will automatically power on if TV or similar
component which supports HDMI CEC, is turned on.
To set the sound bar to stand-by mode:
Press the ON/STAND-BY button again on the main unit or
the remote control and the subwoofer indicator turns red.
Notes:
● A slight audio delay after TV is turned ON does not
mean that the system is faulty. This is normal.
speaker is enabled” message will be
displayed if SHARP LCD TV does not detect HT-SB60
during power on. However the message “AQUOS audio
with AQUOS LINK is enabled” will be displayed soon as
HT-SB60 is detected. These messages may vary for
other TV model.
● “AQUOS
Test of the remote control
Point the remote control directly at the remote sensor on
the sound bar.
The remote control can be used within the range
shown below:
Demonstration mode
● The first time the sound bar is plugged in, the sound bar
will enter the demonstration mode.
● To cancel the demonstration mode, press the DEMO
Remote sensor
button on the remote control during power stand-by
mode.
● To enter to the low power consumption mode, press
and hold the DEMO button (Demo indicator turns off).
Connecting the wireless Subwoofer
0.2 m - 6 m
15° 15°
The sound bar and subwoofer will link automatically
(wirelessly) when turned on as it is already pre-linked at
the factory. If the link cannot be established, please set the
connection by the following method.
1. Press and hold the PAIRING button on the sound bar for
more than 3 seconds.
2. Within 2 minutes, press and hold the PAIRING button on
the subwoofer for more than 3 seconds.
● During pairing process:
E-10
2012 September 5
HT-SB60
On sound bar:
“PAIRING” will blink.
On subwoofer:
indicator will blink in blue.
1
2
3
4
5
6
7
1
9
General control (continued)
● When pairing is successful:
Muting
On sound bar:
“PAIRING” disappears.
On subwoofer:
indicator turns blue.
The volume is muted temporarily when pressing the (MUTE)
button on the remote control. Press again to restore the volume.
Note:
When the sound bar is turned off and back on again,
muting is cancelled.
Subwoofer
Sound Bar
Sound Mode
PAIRING
Notes:
● If a device such as microwave oven, wireless LAN card,
Bluetooth device or any other device that uses the
same 2.4GHz frequency near the system, some sound
interruption may be heard due to interference.
● The transmission distance of the wireless signal
between the subwoofer and sound bar is about 10m,
but may vary depending on your operating
environment. If a steel-concrete or metallic wall is
between the subwoofer and the sound bar, the system
may not operate at all, because the wireless signal
cannot penetrate metal.
Sound bar operation:
To change to a different mode, press the SOUND MODE
button repeatedly until the desired sound mode is
displayed.
Remote control operation:
Press the desired sound mode button on the remote
control.
CINEMA
Caution:
● Keep the subwoofer away from water and moisture.
● To get the optimum listening performance, make sure
the area around the sound bar and subwoofer is clear
of any obstacles.
Display brightness control
Press the DIMMER button to adjust the brightness of the
display.
Dimmer 1
(Display is dim)
Dimmer 2
(Display gets dimmer)
Dimmer Off
(Display is bright)
(for standard sound effect)
GAME
(for game sound effect)
SPORT
(for sport broadcasting)
NEWS
(for news)
NIGHT
(for night)
BYPASS
(for flat sound effect)
Bass and Treble Control
Bass and Treble control is applicable during BYPASS
mode only.
Bass Control
1. Press the BASS button.
2. Within 5 seconds, press the VOL (+ or –) button to adjust
the bass.
Treble Control
1. Press the TREBLE button.
2. Within 5 seconds, press the VOL (+ or –) button to adjust
the bass.
Subwoofer level control
Volume auto fade-in
If you turn off and on the sound bar with the volume set to
80 or higher, the volume starts at 40 and fades in to the last
set level.
Volume control
Sound bar operation:
Press the VOLUME +
button to increase the
volume and the VOLUME –
Min 1 2 ..... 99 Max
button for decreasing.
Remote control operation:
Press the VOL + button to increase the volume and the
VOL – button to decrease the volume.
The subwoofer level can be
adjusted.
To increase the level,
–5 –4 ..... +4 +5
press the SW LEVEL
button.
To decrease the level, press the SW LEVEL
button.
Notes:
● When sound from the speaker is distorted, decrease
the subwoofer level.
● When changing the subwoofer level, the output level of
the subwoofer is also changed.
AV SYNC level control
The AV SYNC (Audio Video
Synchronization) level can
be adjusted.
To increase the level, press
0 +1 ..... +3
the AV SYNC + button.
To decrease the level, press the AV SYNC – button.
E-11
2012 September 5
(for cinema sound effect)
MUSIC
HT-SB60
1
2
3
4
5
6
7
8
9
General control (continued)
General control (continued)
Press the 3D AUDIO button repeatedly to select:
Speaker output selection (HDMI connection)
3D AUDIO 1 : Sound effect that emphasizes 3D
sound.
Press and hold
(MUTE) button on the remote control
until “TV SPEAKER” or “SB SPEAKER” appears on the
display to toggle sound output between this sound bar or
TV.
3D AUDIO 2 : Sound effect that maintains the 3D
sound and improve vocal clarity.
Function
HDMI 1
HDMI 2
TV ARC
OPTICAL
AUDIO IN
3D AUDIO OFF : 3D sound effect off.
When pressing the SOURCE button, the input source will
change. Press the SOURCE button repeatedly to select
desired input source, or
press TV ARC button on the remote control to select TV ARC.
This product incorporates decoders supporting the Dolby
Digital system and DTS system.
DTS (Digital
Theatre
Systems)
One of the digital audio systems for theatrical
use. As the sound quality is emphasized, you
can enjoy the realistic sound effect in the home
theatre system.
Lights up when detecting DTS signal.
Dolby Digital One of the digital audio systems for theatrical
use. You can also enjoy the stereophonic effect
in the home theatre system.
Lights up when detecting Dolby Digital signal.
PCM
This is a general term for digitally encoded audio
(Pulse Code signals on a CD or DVD.
Modulation) This sound bar lets you enjoy playback of digital
signals from sources such as CD or DVD.
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
APC (Auto Power Off Control)
This sound bar can be set to turn off automatically if no signal is
detected.
1. Press the APC button repeatedly to select the time.
APC 20 min
APC 15 min
APC 5 min
APC 10 min
2. The sound bar will enter the power stand-by mode automatically
if no signal is detected after the preset time has elapsed.
Audio Return Channel (ARC) (Audio
Return Channel submenu)
Operating the TV with the remote
control
You can operate Sharp TVs with this system’s remote
control.
The audio return channel (ARC) function enables an HDMI
ARC-capable TV to send the audio stream to the HDMI OUT
socket of the receiver. To use this function, you must select
the TV ARC input and your TV must supports the ARC.
Watching TV
Point the remote control at the TV.
1 Press the TV ( ) ON/STAND-BY button to turn on
the TV.
3D sound mode
S+ 3D technology creates 3D sound through speakers
regardless of the type of sound source, whether it is
monaural, stereo or multichannel. It simulates sound
transmission characteristics using digital signal processing
to create a widening effect on the sound in the ambient
space around the sound source.
2 Pressing the TV CH
channel switching.
volume.
Other operable button
E-12
HT-SB60
button enables TV
3 Press the TV VOL + or – button to adjust the TV
By using this technology, multichannel surround sound can
be produced from 2.1ch source.
2012 September 5
or
Input Select Button
1
2
3
4
5
6
7
1
9
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service centre.
Symptom
● Wireless connection
cannot be established.
General
Symptom
● No sound is heard.
Possible cause
●
●
● The sound from
subwoofer is not well
balanced.
● Power turns off
suddenly.
set properly?
Is the volume level set to “Min”?
Is muting activated?
Is HDMI compliant equipment
being used?
Is the HDMI cable connected
correctly?
Connect the HDMI cable
correctly and then perform the
reset procedure. (refer this
page)
Do not connect or disconnect
an HDMI cable whilst power is
on. This may lead to operation
problems.
● The power is not turned
● Is the sound bar unplugged?
● The protection circuit may be
any computers or mobile
phones.
by mode and then turn it back
on.
● Background noise
appears when
connecting with RCA
audio output terminal
connection from a TVset/ DVD/Blu-ray Disc
Player.
● Wireless connection
cannot be established.
front of the sound bar?
● Is there a strong light shining
on the remote sensor?
● Is the remote control for
another equipment used
simultaneously?
● The sound bar cannot
be turned on with the
remote control.
sound bar plugged in?
● Is the battery inserted?
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet or
on the transmitter on the remote control. Condensation can cause
the sound bar to malfunction. If this happens, leave the power on
until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the
sound bar.
If problem occurs during operation
● Depending on the TV and
Video component, 3D images
may not be displayed.
Check the operation manual of
the respective component.
● HDMI cable not support 3D
image.
If such a problem occurs, do the following:
1. Set the sound bar to the stand-by mode and turn the power on
again.
2. If the sound bar is not restored in the previous operation, unplug
and plug in the sound bar again, and then turn the power on.
Factory reset, clearing all memory
● Please change to HDMI/ARC
or headphone terminal from
TV-Set/DVD/Blu-ray Disc
Player. This effect may occur
depending on TV/DVD/Blu-ray
Disc Player-Brand, model and
age, and it is not the sound bar
problem.
Make sure to disconnect all output and input cables attached to the
sound bar before performing the factory reset.
1. Press the ON/STAND-BY button to enter the power stand-by
mode.
2. Whilst pressing the SOUND MODE button, press and hold the
ON/STAND-BY button until “RESET” appears.
● Check the distance between
the sound bar and subwoofer
(less than 10m (32 feet)).
● Make sure there is no other
wireless devices near the unit.
Caution:
This operation will erase all data stored in memory.
E-13
2012 September 5
● Is the AC power lead of the
When this product is subject to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
activated. Unplug and plug in
the power lead again after 5
minutes or more.
on the TV.
incorrect?
Condensation
correctly? Connect the HDMI
cable correctly and then
perform the reset procedure.
● Set the sound bar to the stand-
● 3D images not displayed
Possible cause
● Is the battery polarity correct?
● Is the battery dead?
● Is the distance or angle
● Are there any obstructions in
● Is the HDMI cable connected
● When a button is
on.
not operate properly.
minimum or maximum level?
● Move the speaker away from
pressed, the sound bar
does not respond.
Symptom
● The remote control does
● Is the subwoofer level set to the
● Noise is heard during
playback.
(especially metal) blocking
between the sound bar and
subwoofer.
● Manually re-link the sound bar
and subwoofer (refer page 10).
Remote control
● Is the input signal (selection)
●
●
●
Possible cause
● Make sure there is no obstacles
HT-SB60
1
2
3
4
5
6
7
8
9
Specifications
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
● Do not apply oil to the inside of each component. It may
cause malfunctions.
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes
for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production unit. There maybe some deviations
from these values in individual unit.
Error indicators and warnings
When you fail to perform operations properly, the following
messages are displayed on the sound bar.
Display
Meaning
● When there is no input signal.
●
●
(Display blinks)
●
●
●
Play back the connected
equipment.
Nonstandard signal. Cannot
be recognized.
Signals other than DOLBY
DIGITAL, DTS, Linear PCM
cannot be recognized.
Poor connection of the digital
audio input terminal.
Turn off the sound bar and
check if the cable is
connected properly.
When the protection circuit is
activated.
Demo indicator
(blinks red)
Sound Bar
Power source
Power
consumption
Dimension
Weight
Output power
AC 220 - 240 V ~ 50/60 Hz
Power on: 38 W
Power standby: 0.4 W
Width: 1385 mm
Height: 73 mm
Depth: 68 mm
3.6 kg
MPO: 160W (80W + 80W) (10% T.H.D.)
RMS: Total 160 watts
RMS: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 120 W (60 W + 60 W) (1% T.H.D.)
Output
HDMI™ output: (audio/video support up
terminal
to 1080p) x 1
Input terminal analogue input (AUDIO IN): x 1
500 mV / 47 kohms
Optical digital input (OPTICAL):
Square type x 1
HDMI input: (audio/video support up to
1080p) x 2
Type
2 Way speaker system
5.7 cm woofer
2.5 cm Soft Dome
Maximum
160 W
input power
Rated input
80 W
power
Impedance
4 ohms
Subwoofer
Power source
Power
consumption
Output power
Type
Maximum
input power
Rated input
power
Impedance
Dimensions
Weight
E-14
2012 September 5
HT-SB60
AC 220 - 240 V ~ 50/60 Hz
33 W
MPO: 150W (10% T.H.D.)
RMS: 150 W (10% T.H.D.)
RMS: 120 W (1% T.H.D.)
Subwoofer system
16 cm woofer
300 W
150 W
3 ohms
Width: 144 mm
Height: 430 mm
Depth: 306 mm
6.1 kg
1
2
3
4
5
6
7
1
9
For Australia and New Zealand customers
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.au
OR CALL SHARP CUSTOMER CARE
1300 135 022
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
FOR LOCATION ENQUIRIES WITHIN
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.nz
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(AUGUST 2011)
EA417EN HT-SB60_Back.fm
2012September18
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in material and manufacture for the
period as stated in the table below.
If service is required during the warranty period, please contact your nearest Sharp
Approved Service Centre. These repairs would be carried out at no charge to the
owner, subject to the conditions specified herein.
This warranty does not extend to defects or injuries caused by or resulting from causes
not attributable to faulty parts or the manufacture of the product, including but not
limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of
maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation,
software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a
warranty claim. This warranty is in addition to and in no way limits, varies or excludes
any implied rights and remedies under any relevant legislation in the country of sale.
This warranty does not cover transportation to and from the Sharp Approved Service
Centre. Goods presented for repair may be replaced by refurbished goods of the same
type rather than being repaired. Refurbished parts may be used to repair the goods.
The repair of your goods may result in the loss of user generated data, please ensure
that you have saved this data elsewhere prior to repair.
WARRANTY PERIODS
Home Theatre Projector
Audio/Home Theatre
Microwave Oven
Steam Oven
Refrigerator
DVD/Blu-ray
Air Conditioner
Portable Air Conditioner
LCD Television
Air Purifier
Vacuum Cleaner
S
A HA
A US RP
1 BN TRA CO
Hu Hun 40 LIA RP
nt tin 003 P OR
in g
gw wo 03 TY. ATI
oo od 9 4 LIM ON
0
d
O
NS Driv 5 ITE F
D
W e
S
21
N HAR
48
59 EW P
Pe Hu ZEA COR
nr go L PO
os J AN R
e, oh D A
Au ns LI TIO
ck ton MIT N
lan D E OF
d riv D
e
Australian customers: Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount
to a major failure. The criteria of a major failure is defined in the Australian
Consumer Law. Should you require any assistance with a major failure please
contact Sharp Customer Care.
12 months (excluding lamps and air filters)
12 months
12 months
12 months
24 months
12 months
60 months
12 months
12 months
12 months
24 months
SPform 040 (JUNE 2012)
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
SHARP CORPORATION
04/1/28
EA417EN HT-SB60_Back.fm
2012September18