Bosch DDC KIT Installation guide

Bosch Diagnostics: KTS 570 Installation Guide
Congratulations for making a decision to invest
in Vetronix-Bosch products, the world-wide
leader in Automotive Diagnostics!
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
Bosch Diagnostics: KTS 570 Installation Guide
!!! Attention !!!
Thank you for purchasing one of the finest
diagnostic tools available. Please take the time to
read this guide to assist you in the initial setup and
usage of this tool.
The Quick Start Guide will assist you in the initial
setup and configuration to make sure that your
initial experience will be as smooth as possible.
If you find that the kit is missing any components,
please call Customer Support.
Toll Free: 800-321-4889 ext 4
If you are experiencing any difficulty during the
initial setup phase please call Technical Support.
Toll Free: 800-321-4889 ext 21
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
KTS 570
ESI[tronic] Software Installation Instructions
Before you get started:
•
•
•
•
Save the Packing Slip that came with your KTS 570 as it has account information
you will need during the release process.
Please disable any Bluetooth drivers on your laptop or pc where you are loading
ESI[tronic]
Verify your computer’s date and time is accurate (incorrect dates can adversely
affect the software security release process)
Close all Windows programs, turn off screen-savers, and disable any anti-virus
software.
CAUTION! Do not forget to enable your anti-virus software after
installation and software security release code activation are complete.
Step 1: INSTALLING THE BOSCH APPLICATIONS MENU
1.
2.
3.
4.
Insert the ESI[tronic] DVD 200x/1 (e.g., 2006/1) into the DVD drive of your PC.
Double click My Computer on the desktop.
Locate and double click the DVD Drive in the Folders list (typically D).
Double click the folder baa.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
5. Double click RBSetup.
6. In the upper right corner, confirm language is set to English (or to the language of
your Windows operating system). Use the up and down arrows to make your
selection.
7. Press F12 on your keyboard or double click the icon next to F12 on the screen to
continue.
8. Read the installation agreement and click Accept.
9. Read the liability statement and click Accept.
10. The Setup Completed message appears. Leave the DVD in the DVD drive and
click OK or press Enter. The PC will be restart.
11. The Bosch Applications Menu has now been successfully loaded.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
STEP 2: INSTALLING ESI[tronic] SOFTWARE
1. After the system restarts, connect the KTS 570 to the PC via USB cable and
supply external power to the KTS.
2. Double click Software Installation in the Bosch Applications Menu.
3. In the Welcome window, confirm that the language setting is correct and Click
Continue.
The Kind/type of installation window appears.
4. Select Local installation (standalone) radio button.
5. Select by highlighting (clicking on) User Defined as the Installation type.
6. Click Continue.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
The Directories window appears.
7. Specify the directories in which the program files and data will be stored and click
Continue. See below figure for recommended settings. (Note: the software will
automatically default to the recommended settings as shown below).
The ESI[tronic] program components window appears.
IMPORTANT STEP!
8. Confirm the appropriate settings are checked, as in the figure below and Click
Continue. ESI[tronic] program, KTS 5xx/650 program [CAS], and Datadownload must be selected; Screen saver is optional.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
The Data-download update window appears.
9. These steps download data from the software DVD to your hard-drive. To add a
module, use your mouse to drag the module name from the left column to the
right column. Only those modules subscribed to will function. The example
below is for customers who subscribed to A, C12 Diagnostic Software.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
The example below is for customers who subscribed to modules A, C, M, P – both
Diagnostic Software and Information Software subscriptions.
NOTE: The 3000+ MB of data in the Archive DVD can be loaded on to your hard
drive (provided there is space) or accessed directly from the DVD when needed. If
you wish to load the Archive information to your hard drive, drag it from the left
column to the right column at this time. You will be prompted by the software later in
the installation process to insert the Archive disc.
10. Once the correct modules have been dragged from the left column to the right
column, Click Continue.
The Start Copying window appears.
11. Confirm that the proper components will be installed to the correct drive on your
PC and Click Continue.
ESI]tronic] will now begin loading on your PC. Depending on the speed of your computer
and the amount of data being transferred, loading times will vary.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
FIRMWARE UPDATE: During the software installation ESI[tronic] will attempt to
update the firmware in the KTS 570. If the KTS 570 was connected to the PC via USB
as instructed previously, the Firmware Update will be successful. If a Firmware Update
Error Message appears, verify the KTS 570 is connected to the PC via USB and is
powered up (verify by blinking green light on end of unit). Click OK and click green check
mark if provided.
If you are unable to connect the KTS 570 at this time, you may process the Firmware
Update at a later time. Click the red circle with a line through it to bypass the Firmware
Update For instructions, go to the FIRMWARE UPDATE section later in this guide.
Firmware Update Error Message:
To perform the Firmware Update at a later time, click the red circle with the line through
it to bypass the Firmware Update and continue the software download:
When the ESI[tronic] software installation is complete an Installation was successful
window will appear.
12. Make sure that the Yes, restart computer now radio button is selected and click
Restart.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
UPDATING ESI[tronic] SOFTWARE
NOTE: If your KTS 570 came with an update DVD (it would be labeled U 200x/2,
200x/3, or 200x/4), it must be loaded at this time. If your KTS 570 did not come with
an update DVD, go to the Obtaining a Release Code section.
WARNING: If the most recent update you have received is U 2006/3, make sure
the DVD has a blue “U*” with an asterisk and there is a red box with the word
“wireless” in it. If you do not have this DVD, contact Customer Support at: 800-3214889 x 4 immediately. The DVD you should use looks like the graphic below. If your
most recent DVD is 2006/4 or later, please continue with that DVD.
U* 2006/3 For KTS 570
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
To update the software, do the following:
1. Ensure the KTS 570 is connected to the PC via USB and supply power to the
KTS.
2. Insert the U (update) DVD into your DVD drive.
3. On the Bosch Applications Menu Double Click Software Installation.
The Update – installation type window appears.
NOTE: At this point you may select Yes, update automatically. HOWEVER
it is recommended you follow the instructions below as they allow you to
confirm the original installation was done correctly.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
4. Select the radio button No, perform user-defined update and Click Continue.
The Data-download window will appear.
5. If your subscription is for Diagnostic software only (A, C12) your update screen
should look like this:
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
If your subscription is for Diagnostic Software and Information Software (A, C, M, P)
your update screen should look like this:
6. Verify the correct modules are in the right column and Click Continue.
The ESI[tronic] update software will now begin loading.
NOTE: During this portion of the installation, the software will “uninstall” the older
version of the KTS and load the newer version. This is a necessary step, do not
stop the download – let the process continue.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
The next window will look like this:
When the software update installation is complete you will be asked to restart your
computer.
ESI[tronic] Software is now loaded on the PC. Follow the instructions below for
Bluetooth® installation and then go to section OBTAINING A RELEASE CODE to “unlock” the secured software.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
KTS 570 BLUETOOTH® INSTALLATION & SETUP
To utilize the Bluetooth wireless functionality, follow the instructions below:
WARNING: Prior to installing the Bluetooth® application you must disable any
Bluetooth® drivers that are already installed on your laptop / PC. For instructions please
consult your laptop / PC instructions or contact the manufacturer.
1. Ensure the KTS 570 is connected to the PC via USB and external power is
supplied to the KTS.
2. Ensure that any internal Bluetooth devices are disabled. Note: The KTS must
use the external Bluetooth dongle for the wireless connection to work.
3. Open the Bosch Diagnostic Device Configuration (DDC) Icon from the
Control Panel.
Win 2000: Click Start > Settings > Control Panel. Double Click the DDC Icon.
Win XP: Click Start> Control Panel
4. Click New.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
5. With Automatic configuration selected, Click Configure USB link.
6. The USB link to the KTS 570 will now be confirmed:
7. Click OK to Continue
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
8. Click New to Start the Bluetooth wireless configuration
9. Click Configure Bluetooth Link
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
10. Click Yes to install the Bluetooth driver software.
11. Select English and Click OK
12. Click Next to install the Bluetooth Stack.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
13. Click the Radio Button to accept the license agreement and then Click Next
14. Click Next to start the Bluetooth Stack installation.
15. Click Yes to start the Install process.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
16. Plug The KTS Bluetooth Dongle into the USB port at this time. Click OK to
continue.
17. Click Yes to restart the computer. Note: Leave the Bluetooth dongle plugged
into the USB Port
18. After the system reboots you should have the Bluetooth Manager Icon displayed
on your desktop. Note: This icon will only be displayed when the Bluetooth
dongle is plugged in.
19. Go to the Control Panel and Double Click the Bosch DDC Control Panel Icon.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
20. Click the New button to add the new Bluetooth connection.
21. Click Yes to install the Bluetooth link.
NOTE: Confirm the USB cable is still plugged into the KTS 570.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
22.
The Bluetooth device will now assign a Bluetooth address to the KTS 570
through the USB cable.
23.
Remove the USB cable from the KTS 570 Module. Click OK
24.
The KTS 570 Bluetooth activation process will now be completed.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
25.
Click Accept and then OK to complete the installation.
Congratulations, you have successfully set up the wireless Bluetooth installation.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
FIRMWARE UPDATE
If your KTS 570 was not connected to the PC during software and firmware
installation you will need to do a Firmware Update as described below.
1. Connect the KTS 570 with the PC via USB and supply external power to the
KTS. Verify power with blinking green light on end of unit. Firmware Update will
not work wirelessly – unit must be connected via USB.
2. Open the Bosch Diagnostic Device Configuration (DDC) from the Control
Panel
3. Double Click the DDC icon.
4. Select the "Firmware Update" tab. Click Refresh
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
5. The firmware will now be updated. When complete, Click OK
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
OBTAINING A RELEASE CODE – 3 METHODS
To Release / Enable / Activate the ESI[tronic] software, follow the
instructions below.
Method 1 – Internet (fastest)
1. On the web go to: https://www.bosch-esitronic.com
NOTE: Ensure the web address is entered exactly as it is written above as this is a
“secure” site as signified by “https”.
Any PC can be used to generate a release code – it does NOT have to be the KTS
570 PC.
2. At the top of the page select English from the Language menu.
3. Click Register.
4. Type the Customer Number and Password (found on the packing slip of the
KTS 570)
5. Type the email address you would like to use for this account.
6. Click register in the right corner.
7. Follow the onscreen instructions to generate a release code.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
8. Enter the ID No. from the ESItronic software. To access this number, do the
following:
9. Open ESI[tronic] by Double Clicking ESI[tronic] from the Bosch Applications
Menu:
10. In the ESI[tronic] screen Click: Settings > Release > Execute
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
11. The ID no. is now displayed (the ID no. below is an example. Use the ID no.
exactly how it appears on your PC).
13. On the website, Type the ID no. and Click Generate Release Code at the
bottom right.
NOTE: When entering the ID. No. into the given space on the ESI[tronic] website do
NOT add spaces or decimal points – only enter the alpha-numeric ID number.
14. The release code will be generated and emailed to the address entered during
registration. To immediately access the release code without checking email,
Click the Back button (lower right corner) and the release code will appear
alongside the ID no. entered.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
15. Cut and Paste or Type the release code into the area provided in ESI[tronic]
(release code below is an example). Enter your Customer No. Click OK.
16. Modules subscribed to and released will be displayed. The information units
displayed will vary depending on the software subscribed to.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
Method 2 – Email
Send an email to: esitronic@bosch-serviceline.com
Include:
• ESI[tronic] Customer Number (from packing slip)
• ID No. from ESI[tronic] (see steps 10-11 above)
• Company name, address, phone number (with area code)
• Contact Name
An email will be sent to the sender with a release code typically within 1 business day.
Enter the release code in ESI[tronic] as described above.
Method 3 – Fax
Send a fax to the ESI[tronic] Serviceline in Germany.
Dial from the US: 011-49-1805-81-23-10
Include:
• ESI[tronic] Customer Number (from packing slip)
• ID No. from ESI[tronic] (see steps 10-11 above)
• Company name, address, phone number (with area code), fax number (with area
code)
• Contact Name
A fax will be sent to the sender with a release code typically within 1 business day.
Enter the release code in ESI[tronic] as described above.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
LOCKING IN A RELEASE CODE
If you have a Network, high speed internet, or if your laptop has a wireless LAN card, it
is highly recommended that you follow the steps below so your ESI[tronic] Release Code
is recognized on-network and off-network. These steps should be done after the
software is released on the PC.
1. Insert the DVD 200X/1 (e.g., 2006/1) into the DVD drive.
2. Double click My Computer on the Desktop.
3. Locate and double click the DVD drive in the Folders list (typically D).
4. Double click the Docs folder.
5. Double click the misc folder.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
26. Double click Mac_New.reg.
27. Click Yes when prompted:
28. Click OK when prompted. Process is now complete.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
Start the training! Getting Started DVD
•
The Getting Started Guide puts you on a path to
effectively utilizing all the functionality of your
diagnostic tool.
•
The training is an animated and narrated guide
that walks you through all of the basic functions
and settings of your new tool.
Launch The Getting Started Application!
•
•
•
•
Insert the DVD and let it “autorun” (If DVD will not
“autorun” then open the DVD and click on the file
called “training.exe”).
From the Main Menu click on” KTS Series” in the
lower section of the menu
This will launch the KTS Getting Started Training.
Note: A sound card must be installed for the
program to operate correctly.
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE
Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
Robert Bosch Corp.
Copyright © 2006
Printed in USA 11/2006
F00E900050
KTS 570 / ESI[tronic] INSTALLATION GUIDE