Datasheet | Asko T761 Technical data

2004 Product & Design Guide

Version 3.0

# 1

IN MORE WAYS

THAN ONE

1

TA B L E O F C O N T E N T S

Dishwashers

Key Selling Features..............................2

New Features ........................................3

Standard Configurations

D3121/D3121XL....................................4

D3331XL ...............................................4

D3451XL ...............................................4

Handle Configurations

D3251XLHD...........................................5

D3531XLHDSS ......................................5

Fully Integrated Configurations

D3251FI ................................................6

D3251XLFI ............................................6

D3251XLFIWS .......................................6

D3531XLFI ............................................6

Planning & Design

Dishwashers

D3121 .................................................16

D3251FI ..............................................16

D3121XL .............................................17

D3331XL .............................................17

D3451XL .............................................17

D3251XLHD.........................................17

D3531XLHD.........................................17

D3251XLFI ..........................................18

D3531XLFI ..........................................18

Fitting the D3251XLFI and D3531XLFI

Custom Door Panel (4-in Toe Kick) ....19

Fitting the D3251FI Custom Door

Panel (6-in Toe Kick) .........................20

D3251XLFI, D3531XLFI & D3251FI

Custom Panel Installation Options .....21

Laundry: Washers

W6021 ................................................22

W6461 ................................................22

W6761 ................................................23

Laundry: Combination Washer/Dryer

WCAM1812 .........................................23

Accessories ...........................................7

EasyInstall Dishwashers ........................8

Laundry: Washers

Key Selling Features..............................9

W6021 ................................................10

W6461 ................................................10

W6761 ................................................11

Laundry: Combination

Washer/Dryer

WCAM1812 .........................................11

Laundry: Dryers

Key Selling Features............................12

T711 ...................................................13

T721 ...................................................13

T731 ...................................................14

T761/T781 ..........................................14

Laundry Accessories ...........................15

Laundry: Dryers

T711 ...................................................24

T731 ...................................................24

T761 ...................................................24

T721 ...................................................25

T781 ...................................................25

Stacked Pair Installations

W6021/T711, W6461/T731,

W6761/T761 .....................................26

W6021/T721, W6461/T721,

W6761/T781 .....................................27

Cabinet/Closet Installations

Stacked Installations ...........................28

Single Unit Installations .......................29

Side-by-side Installations ....................30

D3000 Dishwashers

D3530FI Dishwasher

ASKO dishwashers and washers meet the Energy Star ® requirements.

D I S H WA S H E R S

Key Selling Features of Every ASKO Dishwasher

(

♦

Exclusive ASKO Features)

♦

20-year life expectancy

♦

Exclusive EasyInstall system makes installations quicker and easier. Now with a rear foot that’s adjustable from the front

♦

The Quiet System TM ensures this is the quietest line of dishwashers – D3000 series is even 12% quieter than previous models

♦

Uses 50% less electricity than any other dishwasher, as few as 181 kWh

♦

Lowest water consumption, using under 4 gallons in a Normal program and as little as 2.4 gallons in the Quick Wash program

♦

Patented Self Cleaning System produces sparkling results without hand pre-rinsing

♦

Anti-jam, auto-reversing drain pump reduces service calls

♦

More 18:9 surgical quality stainless steel components than any other dishwasher

(tank filters, spray arms, entire tank, inner door and guide rails)

♦

One-piece, sealed, galvanized-steel base pan

♦

Self-cleaning triple filtration system

♦

AquaSafe TM containment system helps to prevent damage to property

• FlexiRacks TM that hold 12+ International place settings

• Stainless steel ball bearings in the upper rack glides

• Nylon-coated baskets with double-coated tines

• Deep upper rack holds salad plates and tall ice tea glasses as well as stemware

• Lower rack holds 12” plates

• True random loading because there is no space-stealing water tower to limit loading

• Removable cutlery basket with lidded, hide-away small items compartment

• Separate drain and circulation pumps and motors reduce noise and energy and water consumption

• Adjustable rinse agent dispenser with indicator

• Lower rack rolls completely out of unit for easy access

• Balanced door remains in whatever position is most convenient, e.g., open just far enough to load/unload the top rack

• Energy saving programs

• Adjustable toe kick to line up with cabinetry

• D3121 and D3251FI are height adjustable from 32-1/4" to 35-1/2", and are ADA

(Americans with Disabilities Act) height-compliant

• D3251FI, D3251XLFI, D3251XLFIWS and D3531XLFI accept custom door panels

• Fully Integrated models come with adjustable door springs that accommodate most custom panels

• Every unit 100% factory tested

2

3

N E W F E AT U R E S

*

XL models feature a new tall tank.

♦

Auto wash (D3531XL) – No-worry wash adjusts temperatures and wash times automatically for sparkling dishes. And, first dishwasher that automatically controls dryness.

♦

SensiDry TM (D3531XL) automatically dries dishes to match humidity in the room

♦

Mix wash (D3531XL) – Wash pots & pans in the lower rack and delicates in the upper rack at the same time

♦

7Spray TM or 8Spray TM wash systems ensure that water reaches everywhere in the tank, corner to corner and top to bottom

♦

PowerZone TM Pots and Pans ensures that the toughest soil gets removed better than if done by hand

♦

PowerZone TM Cutlery Basket thorougly cleans everything in the cutlery basket

♦

AquaLevel TM sensor adds water automatically if a bowl or glass turns over and collects water (except D3121 and D3121XL)

♦

CoolTouch (D3531XL) cools dishes to room temperature so hot dishes won’t hurt hands

♦

Counter-saving trim strip (XL models)

• Upper rack holds 9-1/2" plates (XL models)

• End-of-program signal for FI and Handle units

• SensiClean TM (D3531XL) sensor in Auto Wash program detects the amount of soil in water and adjusts program temperature and time

• Express Wash reduces time and energy usage

• 1/2-load Wash allows you to wash either the upper or lower rack separately; ideal for small loads

• In-line, hidden heating element. No risk of melting plastic items

• Check valve prevents drain flowback

• Movable cutlery basket increases loading flexibility

• Accepts second cutlery basket, so stainless steel and silver items can be washed separately

• China Guard (D3531XL)

• One-piece door look (XL models)

★ ★

★ ★ ★

★

Warranty:

3 YEARS: All parts and labor

5 YEARS: Parts for solid state controls, timers, motors, pumps and racks

LIFETIME: Stainless steel tank

(See Warranty Certificate for complete details.)

S TA N DA R D C O N F I G U R AT I O N S

D3121/D3121XL*

COLORS

SKUs

SHIPPING WT

XL

Black

D3121B

D3121XLB

96 lb

104 lb

White

D3121W

D3121XLW

96 lb

104 lb

Bisque

D3121Q

D3121XLQ

96 lb

104 lb

Stainless Steel

D3121SS

D3121XLSS

96 lb

104 lb

Key Features

(

♦

Unique ASKO Features)

♦

Unique push-button controls

• 7Spray TM wash system delivers superior cleaning

• Upper rack holds 9-1/2" plates

(D3121XL)

• Cycle progression indicator

• KidLock TM prevents child from opening door

• Five temperatures: 85°, 120°, 130°,

140°, and 160° F

• Four wash programs

D3331XL*

COLORS

SKUs

SHIPPING WT

Black

D3331XLB

104 lb

White

D3331XLW

104 lb

Stainless Steel

D3331XLSS

104 lb

Step-Up Features

(

♦


♦

Unique push-button LCD controls

• Turbo Fan Drying System

• Aqua level sensor

• Seven temperatures: 85°, 105°, 120°,


• SteamSafe TM controls escaping steam

• Remaining time indicator

• Adjustable stemware rack

130°, 140°, 160°, and 170° F

• Six wash programs

• Pulse Wash

• Delay start: 1–12 hours

D3451XL*

COLORS

SKUs

SHIPPING WT

Black

D3451XLB

107 lb

White

D3451XLW

107 lb

Step-Up Features

• 8Spray TM wash system

• Safe & Handy TM Upper Cutlery Basket

• Hidden push-button controls

• 1/2 Load washing, upper or lower basket only


Stainless Steel

D3451XLSS

107 lb

• Express Wash reduces program time and saves energy

• End-of-program signal

• Sleek, easy-to-clean control panel

• 5-hour delay

4

5

H A N D L E C O N F I G U R AT I O N S

D3251XLHD*

COLORS

SKUs

SHIPPING WT

Black

D3251XLHDB D3251XLHDW D3251XLHDSS

116 lb 116 lb 116 lb

Key Features

• AquaLevel TM Sensor monitors water level



• Curved handle in black or white

• Straight towel bar handle in stainless steel


• Rinse aid indicator light on control panel

• Knife Guard



• KidSafe TM prevents child from changing programs

• Seven temperatures: 85˚, 105˚,120˚,

130˚, 140, 160˚, and 170˚ F





• Delay start: 5 hours


D3531XLHD* Stainless Steel

COLOR

SKU

SHIPPING WT

Stainless Steel

D3531XLHDSS

125 lb

Step-Up Features

(

♦


♦

CoolTouch system cools items after dry cycle

♦

Mixed Load cycle washes delicate items on top and pots and pans on


• Safe & Handy TM Upper Cutlery Basket

• 8Spray TM wash system

• Stainless steel door with straight bottom

♦

SensiClean TM – sensor-controlled washing program (Auto Wash)

♦

SensiDry TM – sensor-controlled drying program

♦

Interior light

♦

LCD display towel bar handle

• Split cup shelf

• China guard

• Adjustable tines in upper and lower racks

• Eight wash programs

• Delay start: 1/2 to 24 hours

F U L LY I N T E G R AT E D C O N F I G U R AT I O N S

D3251FI / D3251XLFI*

(Fully integrated models)

Optional Panel COLORS

SKU

SHIPPING WT

Optional Panel Optional Panel

D3251FI D3251XLFI

101 lb 108 lb 111 lb

Key Features

• AquaLevel TM Sensor monitors wash water



• Available with water softener

(D3251XLFIWS)

• Accepts owner-supplied one-piece custom door panel

• Accepts optional one-piece door, as shown (see accessories)

• KidSafe TM prevents child from changing programs


• Rinse aid indicator light on panel



(XL Models)

• Knife Guard

• Seven temperatures: 85°, 105°,120°,

130°, 140°, 160°, and 170° F





• Delay start: 5 hours


D3531XLFI*

(Fully integrated model)

COLORS

SKU

SHIPPING WT

Optional Panel

D3531XLFI

117 lb

Step-Up Features

(

♦


♦

Mixed Load cycle washes delicate items on top and pots and pans on bottom

♦

Safe & Handy TM Upper Cutlery Basket

♦

CoolTouch system cools items after dry cycle

♦

Interior light

♦

SensiDry TM – sensor-controlled drying program

♦

SensiClean TM – sensor-controlled washing program (Auto Wash)

♦

LCD display


• 8Spray TM wash system delivers superior cleaning with minimal water usage

• Accepts owner-supplied one-piece custom door panel

• Eight wash programs

• China guard

• Adjustable tines in upper & lower racks

• Split cup shelf

• Accepts optional one-piece door, as shown (see accessories)

• Delay start: 1/2 to 24 hours

6

7

O P T I O N A L D I S H WA S H E R A C C E S S O R I E S

Curved Handle for Fully Integrated Dishwashers

8073718-0 White

8073718-84 Bisque

8073718-29 Black

8073718-82 Brass-Like 8073718-95 Stainless Steel

One-Piece Door with Handle

Only available for D3251XLFI, D3531XLFI and D3531XLFIWS.

One-piece door with matching one-piece, curved handle.

8076697-0 White

8076697-86 Black

8076697-95 Stainless Steel

European Toe Kick (Two Pieces)

8070121-0 Extension 8057528–0 Toe Kick

White European toe kick to accommodate 6" toe space on models

D3250FI and D3530FI. Two pieces are 23-1/2" wide.

8070121-86 Extension 8057528–29 Toe Kick

Black toe kick for same installation. Two pieces are 23-1/2" wide.

European Toe Kick

2.5" Toe Kicks

For special installations (D3121, D3251FI).

805SC-W White 805SC-B Black 805SC-M Stainless Steel

Dishwasher Tip Guard

8070851

Secures dishwasher when it’s not possible to attach it to cabinetry or counter top. Sold individually.

2.5" Toe Kick

Heavy-Duty Door Springs for FI Dishwashers

8060232-77 (Yellow), 3-12 lbs.

8076163-77 (Blue), 16-24 lbs.

Provide additional support for custom panels. Sold individually.

Replacement Dishwasher Baskets

8801236–36

Upper basket for all models; has a split cup rack and a stemware rack.

8801237–36

Lower basket for all models; has adjustable tines.

8801239–77

Cutlery basket for all models.

Extension

E A S Y I N S TA L L ™ D I S H WA S H E R S

ASKO’s dishwashers come with all the connections you need. We’ve eliminated the need to get into the electrical and mechanical area, which makes installation simple and quick. If a dishwasher is being installed in an area for the first time, most of the cabinetwork, plumbing, and electrical has to be done before you move the machine into place. If you are replacing an old dishwasher, you must check the plumbing connection and wiring before you install the new dishwasher.

This system has these components which have been approved by regulatory authorities (cUL):

• Over 5' of Pex hose that replaces the water-inlet copper tubing. It has a 3/8"-compression fitting that mates with a 3/8" shut-off valve.

Length: 5'2" from back of unit.

• Over 6' of drain hose with an adaptable drain connection. The high loop is built into this hose on the back of the unit.

Length: 6'6" from back of unit.

• A 6' long electrical cord with standard, 3-pronged, 120V plug.

This eliminates the need to wire anything under the unit.

• Front-adjustable rear leg. You can raise or lower the rear leg from the front of the unit simply by using a flat-head screwdriver to rotate the adjusting screw.

Pex hose with 3/8" brass fitting.

Already wired with a standard three-pronged plug.

Front-adjustable rear leg.

Back of ASKO dishwasher with EasyInstall system.

Drain hose with multiple size adaptor.

8

9

C L OT H E S WA S H E R S

Key Selling Features Of Every ASKO Washer

(

♦

Exclusive Features)

♦


♦

Large, easy-access door opening

♦

Quick Wash program washes smaller or lightly-soiled loads in only 34 minutes, yet uses as little as 5.7 gallons of water and 0.3kWh (2¢) of electricity

♦

Normal program washes full loads and rinses three times in only 45 minutes with only 9.3 gallons of water and 0.9kWh (6¢) of electricity.

♦

Quattro TM , four-shock suspension,

Automatic Load Balancing System, cast-iron counterweights, and heavyduty bearings control load balancing and provide virtually vibration-free spin cycles for quiet operation – also prevent walking and allow for stacking of units

♦

Solid rubber SmartSeal TM door gasket eliminates troublesome bellows gasket seal that can leak and collect detergent and soil residue

♦

Uses less electricity than most other washers (according to DOE and FTC test procedures)

♦

Multiple, adjustable programs

• Additional plug or wiring is unnecessary because ASKO dryer has 220V receptacle for ASKO washer. This eliminates the need to purchase an expensive dual-outlet splitter box or to have an additional 220V line run for the washer.

• Capacity as large as any top-loader: up to 14 bath towels

• Smaller exterior size and quiet operation allow for installation in more convenient locations, e.g., in closets or under counters in bathrooms, utility rooms, and kitchens

• Tumble action, precise temperature controls, optimal wash time, less detergent and elimination of bleach produce significantly cleaner, freshersmelling laundry and extend the life and beauty of clothing

• High-lift ribs raise laundry to optimal height before dropping into water, increasing wash action effectiveness.

Ribs also shower laundry with water to enhance cleaning action

• Sensor Level Control System automatically determines the correct amount of water for every load

• Can save 15,000 gallons of water annually. Quick Wash uses 5.7 gallons per load on average; Normal Wash uses 15. Typical old-style agitators use an average of 44 and domestic front loaders use 28.

• An ASKO washer can save over $200 annually in water, electricity, detergent, and bleach costs.

• Stainless steel, electro-polished interior drum is snag-free, more gentle to clothes, and more durable than porcelain or plastic

• Built-in water heater provides optimal temperatures (Cold, 85° – 205° F) for better cleaning and energy savings by eliminating need to use home’s lessefficient water heater

• Cold-water fill helps remove protein stains, such as blood, as well as wine and grape juice

• High spin speeds (up to 1,600 rpm) remove up to 94% of water that can be extracted by centrifugal force

(spinning) – reducing time and energy consumed by dryer and extending life and beauty of clothing

• Up to seven rinses remove virtually every trace of detergent and soil

• Both units can run off a single, standard 30 amp circuit

• Child-proof controls and electronic door latch

• Dual, internal fuse protection

• Easy-to-reach, out-front controls

• Anti-jam, auto-reversing drain pump reduces service calls

• Rust- and chip-proof stainless steel inner and outer tanks

• Automatic detergent and fabric softener dispenser

• Removable, washable detergent compartment

• Stackable when paired with ASKO dryer (kit included with dryer)

• Every unit 100% factory tested for a minimum of 2-1/2 hours

• cUL approved

W660 Washer & T760 Dryer

2001


2002

★ ★

★ ★ ★

★

Warranty:


5 YEARS: Parts for electronic controls, timers, motors & pumps

LIFETIME: Stainless steel drum


ASKO dishwashers and washers meet the Energy Star ® requirements.

Start

Stop

W6021

(DR)

COLORS

SKUs

Shipping Wt

White

W6021

161 lb

Titanium

W6021T

161 lb

Titanium Stainless

W6021TS

161 lb

205

175

160

Temperature ˚F

85

Drain

Spin

105 Rinse

120

Hand/

Delicate

Wool

140

Programs

Sani

Heavy

Normal+

Perma press

Normal

Quick

Key Features

• Six-way Aqua Block Water Containment System

• Electronic dial and push-button controls

• 800 and 1200 rpm spin speeds

• Adjustable water temperature: Cold, 85° – 205° F

• Child-proof temperature lock

• Programs printed around knob on control panel

• Large tub door opening

• Removable pin trap

• No-spin option

• Separate Wool and Hand Wash programs

• Drop-down door

Drain

Spin

Rinse

Hand/

Delicate

Wool

Programs

Sani

Heavy

Normal+

Perma press

Normal

Quick

W6461

COLORS

SKUs

White

W6461

SHIPPING WT 174 lb

Titanium

W6461T

174 lb

Titanium Stainless

W6461TS

174 lb

Step-Up Features

(

♦

Unique Features)

♦

EasyControl™ system with program dial, option buttons and LED window

♦

11 programs are printed around knob on control panel.

♦

Six option features (buttons) are denoted on detergent drawer: temperature, spin speed, delay start, Super rinse, high water and anti-crease.

♦

LED window shows temperature, estimated remaining time, spin speeds, and available options.

• New Anti-Crease program (first ever in a washer) greatly reduces wrinkles before clothing goes in the dryer. After the last spin, the tank rotates for three seconds every minute for up to two hours or until the door is opened.

• Remembers last program used and automatically repeats program unless changed.

• Time delay start (1-24 hours)

• Seven wash temperature options (85° F to 205° F)

• 400-1600 rpm spin speeds, adjustable

• SensiSave water & energy saving system

• Program interrupt, add-an-item feature

10

11

P1 P2

Start

Stop

P3 P4

Menu Enter

W6761

COLORS

SKUs

White

W6761W

SHIPPING WT 183 lb

Stainless Steel

W6761SS

193 lb

Step-Up Features

(

♦

Unique Features)

♦

Quiet Package

♦

EasyControl™ system with four-button operation

♦

Seven-way Aqua-Block Water Containment System with float-activated shut-off valve

♦

Programs can be altered permanently or for one-time use

♦

Communicates in 11 languages

• Available with stainless steel exterior with matching control panel and inner cabinet

• Adjustable spin speeds (400 – 1600 rpm) for a spin about twice as fast as an oldstyle agitator or domestic front-loader

WCAM1812

combination washer/dryer

COLORS

SKUs

White

WCAM1812

SHIPPING WT 195 lb

Key Features

• Independent controls provide wash-only, dry-only or combo wash/dry options

• Large capacity

• Three spin speeds: 550, 800 and 1200 rpm

• Easy controls – fully electronic

• Stainless steel inner and outer tank

• Internal water heater with temperature boost to 140º F

• Four shock absorber suspension

• Three rinses plus extra rinse option

• Seamless transition from washing to drying

• Condensation drying – no external venting required

• 110/115 volts, 15 amp

• Cycle progression indicator light

• ADA height compliant


2001


2002

★ ★

★ ★ ★

★

C L OT H E S D RY E R S

(All units are electric)

Key Selling Features Of Every ASKO Dryer

(

♦

Exclusive Features)

♦


♦

Butterfly Drying™ System’s offset paddles help move clothing from front-to-back and back-to-front in drum to prevent wrinkles. One-direction rotation also extends motor life

♦

Cleanable air-flow fan

♦

Adjustable cool down for every heated cycle

• Additional plug or wiring is unnecessary because ASKO dryer has 220V receptacle for ASKO washer. This eliminates the need to purchase an expensive dual-outlet splitter box or to have an additional 220V line run for the washer. (Dryer power cord not supplied.)

• Stainless steel, electro-polished interior drum is snag-free, more gentle to clothes, and more durable than porcelain or plastic

• Anti-crease program reduces wrinkles

• Large capacity drum also reduces wrinkles

• Can be stacked when paired with ASKO washer – stacking kit included

• Up to 90 minute, time-controlled drying program

• Air, low and normal temperature programs

• End-of-program buzzer

• Air (fluff) drying program

• Three-way venting increases installation options

• Easy-to-reach, out-front controls

• Easy-access, double lint filter

• Flush, swing-out door can be hinged on left or right

• Only needs one 220V, 30 amp outlet (like any standard US dryer)

• Every unit 100% factory tested for a minimum of 2-1/2 hours

• cUL approved

Laundry Warranty:


5 YEARS: Parts for electronic controls, timers, motors and pumps

LIFETIME: Stainless steel drum


Do not pair with a top-loading washer; those washers spin too slowly to remove enough moisture to allow for efficient drying.

12

13

T711

COLORS

SKUs

SHIPPING WT

White

T711

86 lb

Titanium

T711T

86 lb

Titanium Stainless

T711TS

86 lb

Start

Air fluff

Temperature

Normal

Low

Air fluff

Timed dry

30 min

60 min

90 min

Programs

Heavy

Normal

Key Features

• Timed and automatic drying programs

• Electro-mechanical knob and push-button controls

• Vented (3 ways)

• Reversible door on all models

• Programs denoted around knob on control panel

• Three temperatures: Normal, Low and Air

• Four drying programs: Heavy, Normal, Timed Dry and Air (Fluff) Dry

• Two cool-down options: Normal and Quick

T721

COLORS

SKUs

White

T721

SHIPPING WT 104 lb

Titanium

T721T

104 lb

Titanium Stainless

T721TS

104 lb

Step-Up Features

(

♦

Unique Features)

♦

Five-way water containment system

• Internal moisture condenser eliminates need for external wall venting

• Two drying programs: Timed Dry and Air (Fluff) Dry

• Programs printed around knob on control panel

Start

Air fluff

Temperature

Normal

Low

Air fluff

Programs

Timed dry

180 min

150 min

120 min

90 min

60 min

30 min

Iron dry

Timed dry

Air fluff

Programs

Heavy

Normal

Delicate

P1 P2 P3 P4

Start Stop

T731

COLORS

SKUs

SHIPPING WT

White

T731W

86 lb

Titanium

T731T

86 lb

Titanium Stainless

T731TS

86 lb

Step-Up Features

(

♦

Unique Features)

♦

EasyControl™ system with program dial, option buttons and LED window

♦

Six programs are printed around knob on control panel.

♦

Six option features (buttons) are identified on sticker inside door: timed drying

(5-90 mnts.), Anti-Crease, Delay Start (1-24 hours), temperature (low-normal), end-of-program buzzer, and cool-down cycle

♦

LED window shows: SensiDry™ program selected, time when a timed-drying program selected, number of minutes when Air Fluff selected, “End” when program is completed, and “C” when in cool-down cycle.

• Remembers last program used and automatically repeats program unless changed.

T761

COLORS

SKUs

SHIPPING WT

White

T761W

86 lb

Stainless Steel

T761SS

96 lb

Step-Up Features - T761

(

♦

Unique Features)

♦

Available with stainless steel exterior with matching control panel and inner cabinet

♦

EasyControl™ system with four-button operation

♦

Programs can be altered permanently or for one-time use

♦

Communicates in 11 languages

• 1–24 hour delay start option

• SensiDry™ program prevents over-drying

• Six drying programs: Extra Dry, Dry, Normal Dry, Iron Dry, Air (Fluff) Dry, and Timed Dry

• 1–3 hour anti-crease option

• Fault indicator

• Epoxy-coated buttons reduce normal wear

T781

COLORS

SKUs

White

T781W

SHIPPING WT 104 lb

Stainless Steel

T781SS

114 lb

Step-Up Features - T781

(

♦

Unique Features)

♦

Five-way Aqua-Block Water Containment System

• Internal moisture condenser system eliminates need for exterior wall venting

14

15

L A U N D RY A C C E S S O R I E S

White Space Trim Kit

8063981

Installs between stacked pair to provide a single unit appearance

Slide-Out Shelf

8061907-0 White

8061907-81 Titanium

Installs between stacked pair

Extends 15" from units

Steel Laundry Platform

8052000-1 White

8052000-3 Titanium

Will raise a washer or a dryer (one machine per platform) 12" off the floor.

Has four adjustable feet.

ecoVantage Laundry Detergent

1800902

Superior Formula and Performance

• The only laundry detergent that has an oxygenated cleaning agent in a perfume- and dye-free (sensitive) formula

• Environmentally friendly

• Front-loader compatible

• HE (High Efficiency)

• Money-back guarantee

• Easy to handle, easy to store

• Seven-pound plastic pail with handle

• Will do approximately 120 loads

Planning & Design: Dishwashers

D3121, D3251FI

Unit Dimensions

HEIGHT

WIDTH

DEPTH: D3121

D3251FI

US

32-1/4"–35-1/2"

24"

23-5/8"

22-7/8"

DEPTH W/DOOR OPEN 46-5/8"

WEIGHT: D3121

D3251FI

96 lb

101 lb

24"

610 mm

METRIC

819–902 mm

610 mm

600 mm

581 mm

1184 mm

44 kg

46 kg

(D3121) 23-5/8"; 600 mm

(D3251) 22-7/8"; 581 mm

S TA N DA R D TA N K M O D E L S

46-5/8"

1184 mm

Technical Data

Electricity

Water pressure

120V, 60Hz, 15 amp

18-176 psi

Heating element 1200 watt

Max loading 1300 watt

Door

2"

50 mm

Cutout Dimensions

US

HEIGHT 32-1/4"–35-1/2"

WIDTH

DEPTH

24"

23-5/8"

METRIC

819–902 mm

610 mm

600 mm

*This depth allows a 1" (25 mm) space for the high-loop drain hose.

NOTE: Maintain a 1/8" (3 mm) minimum clearance between unit and cabinet.

The electrical and water supplies should enter through the area indicated by the shaded area. Preferably, they should come through the right side of the machine. The access hole must be round and smooth and no bigger than 2" in diameter.

2"

50 mm

6-1/4" to 8-1/4"

159 to 210 mm

23-5/8"

600 mm

24"

610 mm

6-1/4"

159 mm

2-1/4"

57 mm

4"

Specifications are subject to change without notice. See installation instructions for additional details.

16


D3121XL, D3331XL, D3451XL, D3251XLHD, D3531XLHD

TA L L TA N K

M O D E L S

Unit Dimensions

HEIGHT

WIDTH

DEPTH

US

34"–37"

24"

23-5/8"

DEPTH W/HANDLE (HD) 25-3/8"


WEIGHT: D3121XL 104 lb

D3331XL

D3451XL

104 lb

107 lb

D3251XLHD 116 lb

D3531XLHD 125 lb

24"

610 mm

METRIC

864–939 mm

610 mm

600 mm

645 mm

1184 mm

47 kg

47 kg

49 kg

53 kg

57 kg

(HD models) 25-3/8"

645 mm

23-5/8"

600 mm

46-5/8"

1184 mm

Technical Data

Electricity

Water pressure

120V, 60Hz, 15 amp

18-176 psi



Door

2"

50 mm

Cutout Dimensions

US

HEIGHT 34"–37"

WIDTH

DEPTH

24"

23-5/8"

METRIC

864–939 mm

610 mm

600 mm

*This depth allows a 1" (25 mm) space for the high-loop drain hose.



2"

50 mm

6-1/4" to 8-1/4"

159 to 210 mm

23-5/8"

600 mm

24"

610 mm

17


6-1/4"

159 mm

2-1/4"

57 mm

4"


D3251XLFI, D3531XLFI

Unit Dimensions

HEIGHT

WIDTH

DEPTH

US

34"–37"

24"

22-7/8"*


WEIGHT: D3251XLFI

D3531XLFI

108 lb

117 lb

24"

610 mm

METRIC

864–939 mm

610 mm

581 mm

1184 mm

49 kg

53 kg

46-5/8"

1184 mm

22-7/8"

581 mm

TA L L TA N K M O D E L S

Technical Data

Electricity

Water pressure

120V, 60Hz, 15 amp

18-176 psi



Door

2"

50 mm

*Does not include the depth of a custom or optional door. If an ASKO optional door is used, add 2-1/2" to the depth.

Custom Front Panels

The D3251XLFI and D3531XLFI can only be installed with a fullyintegrated custom door panel that extends from the toe kick to the counter top. A one-piece custom door panel with a curved handle is available (see page 7).

Refer to page 19 for instructions on how to install the custom panels.

Cutout Dimensions

US

HEIGHT 34"–37"

WIDTH

DEPTH

24"

23-5/8"

METRIC

864–939 mm

610 mm

600 mm



2"

50 mm

6-1/4" to 8-1/4"

159 to 210 mm


23-5/8"

600 mm

24"

610 mm

6-1/4"

159 mm

2-1/4"

57 mm

4"

18


FITTING THE D3251XLFI AND D3531XLFI CUSTOM DOOR PANEL –

4-INCH TOE KICK

The D3251XLFI and D3531XLFI can only be installed with a fully-integrated, buyer-supplied custom door panel that extends from the toe kick to the counter top. The unit comes with everything needed to make installing the door panel easy. The door is predrilled for the panel’s mounting screws.

The custom panel should be a minimum of 3/4" (19 mm) thick.

Items Provided With The Unit

• Two 3/8" screws

• Four 1-3/4" screws

CUSTOM PANEL DIMENSIONS

WIDTH

HEIGHT

23-1/2" (597 mm)*

30-1/8" (765 mm)

(Measured from the top of the panel to the lower edge of the kitchen cabinet.)

THICKNESS 3/4" (19 mm)

WEIGHT Up to 18 lb

Up to 24 lb with accessory spring

Installing The Custom Panel – 4-Inch Toe Kick

Before fitting the custom panel, the dishwasher must be installed underneath the cabinet. After you’ve made the required measurements, pull the machine out again to install the panel.

Refer to the illustration at right for instruction references.

1. Fit the handle (A) onto the panel according to the manufacturer’s instructions. (NOTE: A handle should be used rather than a knob, because a knob does not provide enough grip.)

WARNING! The custom panel must not obstruct the fan exhaust vent; otherwise, moisture from the vent could eventually damage the cabinet and create drying problems.

D

D

2. The two short screws (B) go into the back of the panel, 16-9/16"

(411 mm) from the upper edge of the panel and 5/8" from the outer edges. Insert the short screws into the panel, leaving 1/8" (3 mm) of space between the screw head and the panel.

3. Hook the panel screws (D) into the keyholes (C) on the dishwasher door.

4. Pull the panel upwards until the lower edge aligns with the lower edge of the cabinets and secure the screws.

5. Open the door and use the four screws (D) supplied to secure the panel to the door.

NOTE: If the door panel weighs more than 18 pounds, you may need to order the heavy-duty door springs. (See page 7.)

*

Adjusting The Door Springs

Before you push the dishwasher into the cabinet opening, test the door to make sure it stays in place at any angle. If it tends to fall down, pull out the machine and adjust the tension of the door springs on the sides of the machine by moving them one hole farther back or by twisting the spring to make it shorter.

Shorten

19

*If a wider door panel is required, the side trim strips must be removed.



FITTING THE D3251FI (STANDARD TANK) CUSTOM DOOR PANEL –

6-INCH TOE KICK

The D3251FI can only be installed with a fully-integrated, buyer-supplied custom door panel that extends from the toe kick to the counter top. The unit comes with everything needed to make installing the door panel easy. The door is predrilled for the panel’s mounting screws.

The custom panel should be a minimum of 3/4" (19 mm) thick.

Items Provided With The Unit

• Two 3/8" screws

• Four 1-3/4" screws

CUSTOM PANEL DIMENSIONS

WIDTH

HEIGHT

23-1/2" (597 mm)

28-1/8" (714 mm)

(Measured from the top of the panel to the lower edge of the kitchen cabinet.)

THICKNESS 3/4" (19 mm)

WEIGHT Up to 18 lb

Up to 24 lb with accessory spring

Installing The Custom Panel – 6-Inch Toe Kick

Before fitting the custom panel, the dishwasher must be installed underneath the cabinet. After you’ve made the required measurements, pull the machine out again to install the panel.

Refer to the illustration at right for instruction references.

1. Fit the handle (A) onto the panel according to the manufacturer’s instructions. (NOTE: A handle should be used rather than a knob, because a knob does not provide enough grip.)

WARNING! The custom panel must not obstruct the fan exhaust vent; otherwise, moisture from the vent could eventually damage the cabinet and create drying problems.

D

D

2. The two short screws (B) go into the back of the panel, 16-3/16"

(411 mm) from the upper edge of the panel and 5/8" from the outer edges. Insert the short screws into the panel, leaving 1/8" (3 mm) of space between the screw head and the panel.

3. Hook the panel screws (D) into the keyholes (C) on the dishwasher door.

4. Pull the panel upwards until the lower edge aligns with the lower edge of the cabinets and secure the screws.

5. Open the door and use the four screws (D) supplied to secure the panel to the door.

NOTE: If the door panel weighs more than 18 pounds, you may need to order the heavy-duty door springs. (See page 7.)

Adjusting The Door Springs

Before you push the dishwasher into the cabinet opening, test the door to make sure it stays in place at any angle. If it tends to fall down, pull out the machine and adjust the tension of the door springs on the sides of the machine by moving them one hole farther back or by twisting the spring to make it shorter.

Shorten


20


D3251XLFI AND D3531XLFI CUSTOM PANEL INSTALLATION OPTIONS

4-inch Toe Kick Installations

Custom panels that extend to cabinet top

The preferred installation option for a 4" toe kick is to extend the custom panel to the cabinet top (as illustrated). A one-piece custom door panel with a curved handle is available for 4-inch toe kick installations (see page 12).

Panel extends from toe kick to cabinet top.

23-1/2"*

597 mm

4-inch toe kick

*If a wider door panel is required, the side trim strips must be removed.

D3251FI CUSTOM PANEL INSTALLATION OPTIONS

6-inch Toe Kick Installations

For 6" toe kick installations, no decorative fill strips or support strips are necessary.

Panel extends from toe kick to cabinet top.

21


Planning & Design: Washers

W6021, W6461

Unit Dimensions

HEIGHT

WIDTH

DEPTH

US

33-1/2"–34-1/2"

23-7/16"

24-7/16" *


WEIGHT 167 lb

*Includes 1" for control knob.

METRIC

850–876 mm

595 mm

621 mm

1080 mm

73 kg

Technical Data

Supply voltage

Water Pressure

Heating element

Internal Fuse

Power cord

(attached)

Single-phase

230 V, 60 Hz

15-146 psi

2000 W

15 A

220 V, 20 Amp

Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to an ASKO dryer, which is equipped with a matching receptacle. If the washer is used separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.

Second-floor (above grade) installations must meet all local building codes.

When placing the washer next to a wall or cabinet, be sure to leave 1/2" (12 mm) of space between the washer and the wall or cabinet.

See pages 26–27 for stacked washer/dryer dimensions.

See pages 28–30 for cutout dimensions for closet and under-cabinet installations.


22

Planning & Design: Washers

W6761

Unit Dimensions

HEIGHT

WIDTH

DEPTH

US

33-1/2"–34-1/2"

23-7/16"

23-7/16"


WEIGHT 174 lb

METRIC

850–876 mm

595 mm

595 mm

1080 mm

79 kg

Technical Data

Supply voltage

Water Pressure

Heating element

Internal Fuse

Power cord

(attached)

Single-phase

230 V, 60 Hz

15-146 psi

2000 W

15 A

220 V, 20 Amp

Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to an ASKO dryer, which is equipped with a matching receptacle. If the washer is used separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.

Second-floor (above grade) installations must meet all local building codes.

When placing the washer next to a wall or cabinet, be sure to leave 1/2" (12 mm) of space between the washer and the wall or cabinet.

See pages 26–27 for stacked washer/dryer dimensions.


Planning & Design: Combination Washer/Dryer

WCAM1812

Unit Dimensions

HEIGHT

WIDTH

DEPTH

US

33-1/4"

23-3/8"

23-1/8"


WEIGHT 195 lb

23-3/8"

594 mm

23-1/8"

587 mm

38-3/4"

984 mm

METRIC

845 mm

594 mm

587 mm

984 mm

88 kg

5-5/8"

143 mm

Po w er cord

Technical Data

Supply voltage

Water Pressure

Heating element

Single-phase

115 V, 60 Hz

15-142 psi

1400 W on dryer

1200 W on washer

115 V, 15 Amp

6-5/8"

168 mm

3-5/8"

92 mm

Power cord

(attached)

Dr ain hose

4-1/2"

102 mm

23


Planning & Design: Dryers

T711, T731, T761 vented dryers

Unit Dimensions

HEIGHT

WIDTH

DEPTH: T711, T731

T761

US

33-1/2"–34-1/2"

23-7/16"

24-7/16" *

23-7/16"


WEIGHT 86 lb


METRIC

850–876 mm

595 mm

621 mm

595 mm

1170 mm

39 kg

Technical Data

Supply voltage Single-phase

230 V, 60 Hz

Heating element 2500 W

(3000 W for T711)

Internal Fuse 15 A

(Except T711)

NOTE: When on a separate outlet, use

220 V, 20 Amp single-phase circuit. When an ASKO washer is connected, use 220 V,

30 Amp single-phase circuit.

The door hinges on ASKO dryers are shipped left-hinged, but they are reversible. See the Dryer Use and Care

Guide for more information.

When placing the dryer next to a wall or cabinet, be sure to leave 1/2" (12 mm) of space between the dryer and the wall or cabinet.

See page 26 for stacked washer/dryer dimensions.


NOTE: Power cord not supplied with unit.

Venting Requirements

WARNING! To reduce the risk of fire, vented dryers must be exhausted

OUTDOORS or the equivalent.

Never cover the end of the dryer stub or vent hose with anything to catch lint, except for a UL-approved vent basket.

The exhaust hose should be run with as few bends as possible to the point of discharge. If necessary, it can be extended to a maximum of 20 feet (610 cm) of 4 in

(10 cm) diameter ridged pipe. Make any bends as gentle as possible. A maximum of four 90° bends may be fitted in the hose, otherwise the performance of the dryer will be impeded. Subtract 4 feet of exhaust hose for every 90° elbow.

If the exhaust hose is taken to a wall outlet, a ventilation grill should be fitted to prevent reverse flow of cold air. Fit the ventilation grill to the outside or inside of the wall.

This appliance should not be exhausted into a chimney, a wall, a ceiling, or a concealed space of a building. Only a metal ventilation grill should be used.

Installation

Examples

Subtract 4 feet

(122 cm) for every 90° elbow.


24

Planning & Design: Dryers

T721, T781 condenser dryers

Unit Dimensions

HEIGHT

WIDTH

DEPTH: T721

T781

US

33-1/2"–34-1/2"

23-7/16"

24-7/16" *

23-7/16"


WEIGHT 103 lb


METRIC

850–876 mm

595 mm

621 mm

595 mm

1170 mm

47 kg

Technical Data

Supply voltage

Heating element

Internal Fuse

Single-phase

230 V, 60 Hz

2500 W

15 A

NOTE: When on a separate outlet, use

220 V, 20 Amp single-phase circuit. When an ASKO washer is connected, use 220 V,

30 Amp single-phase circuit.

The door hinges on ASKO dryers are shipped left-hinged, but they are reversible.

See the Dryer Use and Care Guide for more information.

When placing the dryer next to a wall or cabinet, be sure to leave 1/2" (12 mm) of space between the dryer and the wall or cabinet.

See page 27 for stacked washer/dryer dimensions.


Condensation Drain Requirements

If possible, you should install the dryer so the condensed water will continuously flow into a drain or sink. To do this, follow the instructions below:

1. Disconnect the short hose (1) from the blue connection.

(It’s okay to let the hose hang down.)

2. Connect the rubber hose supplied with the dryer to the blue nipple (2).

3. Run the hose to a drain or sink, as illustrated.

NOTE: Power cord not supplied with unit.

NOTE: The drain hose must not be more than 40" above the floor or the bottom of the unit.

1

Back of dryer

3

2

3

40"

(1016 mm) maximum height

25


Planning & Design: Stacked Laundry Pairs

W6021/T711, W6461/T731, W6761/T761

(vented dryers)

Dimensions

HEIGHT

WIDTH

US

67"–69"

23-7/16"

DEPTH: W6021, W6461 24-7/16" *

WEIGHT

W6761 23-7/16"

253–258 lb


METRIC

1702–1753 mm

595 mm

621 mm

595 mm

115–117 kg

Any ASKO dryer can be mounted on top of any matching ASKO washer.

Stacking kits are provided with the dryer.

Refer to the ASKO Dryer Use and Care

Guide for stacking instructions.

Every ASKO washer is delivered readyfitted with a plug and is intended for connection to an ASKO dryer, which is equipped with a matching receptacle.

When an ASKO washer is connected to the dryer, use 220 V, 30 Amp singlephase circuit. When the dryer is on a separate outlet, use

220 V, 20 Amp single-phase circuit. If the washer is used separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.

When placing a stacked set next to a wall or cabinet, be sure to leave 1/2" (12 mm) of space between the washer and the wall or cabinet.

See page 24 for venting requirements.

See pages 29 for stacked cabinet or closet dimensions.

WARNING! Never stack a washer on top of a dryer!

WARNING! To reduce the risk of fire, vented dryers must be exhausted

OUTDOORS or the equivalent.



26

Planning & Design: Stacked Laundry Pairs

W6021/T721, W6461/T721, W6761/T781

(condenser dryers)

Dimensions

HEIGHT

WIDTH

DEPTH: W6021/T721

W6761/T781

WEIGHT


US

67"–69"

23-7/16"

24-7/16"*

23-7/16"

270–275 lb

METRIC

1702–1753 mm

595 mm

621 mm

595 mm

122–125 kg

Any ASKO dryer can be mounted on top of any matching ASKO washer.

Stacking kits are provided with the dryer.

Refer to the ASKO Dryer Use and Care

Guide for stacking instructions.

Every ASKO washer is delivered readyfitted with a plug and is intended for connection to an ASKO dryer, which is equipped with a matching receptacle.

When an ASKO washer is connected to the dryer, use 220 V, 30 Amp singlephase circuit. When the dryer is on a separate outlet, use 220 V, 20

Amp single-phase circuit. If the washer is used separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.

When placing a stacked pair next to a wall or cabinet, be sure to leave 1/2" (12 mm) of space between the washer and the wall or cabinet.

ASKO condenser dryers can be installed to continuously drain through a hose attached to the rear of the machine. To ensure proper drainage, the drain must not be higher than 40" above the bottom of the dryer.

See page 25 for condensation drain requirements.

See page 29 for stacked cabinet or closet installation dimensions.

WARNING! Never stack a washer on top of a dryer!

27


Planning & Design: Laundry

STACKED CABINET OR CLOSET INSTALLATIONS

ASKO’s front panel controls make it possible to install the washers and dryers under a cabinet or in a closet. Make sure there is a 1/2" (12 mm) minimum clearance between units and between units and cabinet or wall. To ensure proper ventilation, we recommend louvered doors, particularly for condenser dryers.

Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to an ASKO dryer, which is equipped with a matching receptacle. When an ASKO washer is connected to the dryer, use 220 V, 30 Amp single-phase circuit. When the dryer is on a separate outlet, use 220 V, 20 Amp single-phase circuit. If the washer is used separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.

Cutout Dimensions

US

HEIGHT 68"–70"

METRIC

1727–1778 mm

WIDTH 24-1/2" minimum

622 mm

DEPTH 25" 635 mm

Vented Dryer Opening

T711 and T731 dryers can be vented from the rear or the left or right side. The cabinet cutout illustrated below gives the dimensions for a rear exhaust. See page 24 for venting requirements.

Condenser Dryer Opening

ASKO condenser dryers can be installed to continuously drain through a hose attached to the rear of the machine.

To ensure proper drainage, the drain must not be higher

than 40" above the bottom of the dryer. See page 25 for condensation drain requirements.

NOTE: To avoid crimping the electrical and water connections, do not install the hookups between the area of 26" to 35" from the floor (as indicated by shaded area in illustrations above).

For stacked installations, we recommend a 6-foot cord.

WARNING! To reduce the risk of fire, vented dryers must be exhausted OUTDOORS or the equivalent.



28


SINGLE UNIT CABINET INSTALLATIONS

ASKO’s front panel controls make it possible to install the washers and dryers under a cabinet or in a closet. Make sure there is a 1/2" (12 mm) minimum clearance between units and between units and cabinet or wall.


Cutout Dimensions

US

HEIGHT 34"–35-1/2"

METRIC

864–902 mm


622 mm

DEPTH 25" 635 mm

NOTE: For these installations, a custom countertop may be required.

Vented Dryers

ASKO vented dryers can be vented from the rear or the left or right side. The cabinet cutout illustrated below gives the dimensions for a rear or left exhaust.

See page 24 for venting requirements.

WARNING! To reduce the risk of fire, vented dryers must be exhausted OUTDOORS or the equivalent. See page 24 for venting requirements.


Washer Opening

Condenser Dryers

ASKO condenser dryers can be installed to continuously drain through a hose attached to the rear of the machine. To ensure proper drainage, the drain must not be higher than 40" above the bottom of the dryer.

See page 25 for condensation drain requirements.

Vented Dryer Opening Condenser Dryer Opening

29



SIDE-BY-SIDE UNDER-COUNTER INSTALLATIONS



Cutout Dimensions

US METRIC

HEIGHT 34"–35-1/2" 864–902 mm


1232 mm

DEPTH 25" 635 mm

NOTE: For these installations, a custom countertop may be required.


Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to an ASKO dryer, which is equipped with a matching receptacle. When an ASKO washer is connected to the dryer, use 220 V, 30 Amp single-phase circuit.

When the dryer is on a separate outlet, use 220 V,

20 Amp single-phase circuit. If the washer is used separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase circuit.

NOTE: To avoid crimping the electrical and water connections, do not install the hookups between the area of 26" to 35" from the floor.

Vented Dryer Opening

Washer and Vented Dryer

T711, T731 and T761 dryers can be vented from the rear or the left or right side. The cabinet cutout illustrated at right gives the dimensions for a rear and left exhaust. See page 24 for venting requirements.

WARNING! To reduce the risk of fire, vented dryers must be exhausted OUTDOORS or the equivalent.

Never cover the end of the dryer stub or vent hose with anything to catch lint, except for a ULapproved vent basket.

Condenser Dryer Opening

Washer and Condenser Dryer

ASKO condenser dryers can be installed to continuously drain through a hose attached to the rear of the machine. To ensure proper drainage, the drain must not be higher than 40" above the bottom of the dryer. See page 25 for condensation drain requirements.


30

B U I LT T O L A S T L O N G E R www.askousa.com

© 2004 ASKO Inc. Form #0760170804 P.O. Box 851805, Richardson, Texas 75085-1805

ASKO Inc. retains the right to vary the model specifications at any time. All facts were accurate at time of printing. Before purchasing any ASKO product, read important energy cost and efficiency information available from retailer.

No results