OWNER’S MANUAL
ENGLISH
DEUTSCH
CLP-370/340/330
CLP-S308/S306
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
—Check your power supply—
Make sure that your local AC
mains voltage matches the
voltage specified on the name
plate on the bottom panel. In
some areas a voltage selector
may be provided on the bottom
panel of the main keyboard unit
near the power cord. Make sure
that the voltage selector is set for
the voltage in your area. The
voltage selector is set at 240V
when the unit is initially shipped.
To change the setting use a
"minus" screwdriver to rotate the
selector dial so that the correct
voltage appears next to the
pointer on the panel.
For information on assembling
the keyboard stand, refer to the
instructions at the end of this
manual.
WICHTIG
IMPORTANT
IMPORTANTE
Vergewissern Sie sich, dass die
Spannung in Ihrem örtlichen
Stromnetz mit der Spannung
übereinstimmt, die auf dem
Typenschild auf der Unterseite
des Instruments angegeben ist. In
bestimmten Regionen ist auf der
Unterseite des Keyboards in der
Nähe des Netzkabels ein
Spannungswähler angebracht.
Vergewissern Sie sich, dass der
Spannungswähler auf die
Spannung Ihres lokalen
Stromnetzes eingestellt ist. Dieser
Spannungswähler ist bei
Auslieferung auf 240 V
eingestellt. Sie können die
Einstellung mit einem
Schlitzschraubenzieher ändern.
Drehen Sie dazu den
Wählschalter, bis der Pfeil auf
dem Instrument auf die richtige
Spannung zeigt.
Vérifiez que la tension spécifiée
sur le panneau inférieur
correspond à la tension du
secteur. Dans certaines régions,
l'instrument peut être équipé d'un
sélecteur de tension situé sur le
panneau inférieur du clavier à
proximité du cordon
d'alimentation.
Asegúrese de que tensión de
alimentación de CA de su área
corresponde con la tensión
especificada en la placa de
características del panel inferior.
En algunas zonas puede haberse
incorporado un selector de
tensión en el panel inferior de la
unidad del teclado principal,
cerca del cable de alimentación.
Asegúrese de que el selector de
tensión esté ajustado a la tensión
de su área. El selector de tensión
se ajusta a 240V cuando la
unidad sale de fábrica. Para
cambiar el ajuste, emplee un
destornillador de cabeza "recta"
para girar el selector de modo
que aparezca la tensión correcta
al lado del indicador del panel.
—Überprüfen Sie Ihren
Netzanschluss—
Weitere Informationen über die
Montage des Keyboard-Ständers
erhalten Sie in den Anweisungen
am Ende dieses Handbuchs.
—Contrôler la source
d'alimentation—
Vérifiez que ce sélecteur est bien
réglé en fonction de la tension
secteur de votre région. Le
sélecteur de tension est réglé sur
240 V au départ d'usine. Pour
modifier ce réglage, utilisez un
tournevis à lame plate pour
tourner le sélecteur afin de mettre
l'indication correspondant à la
tension de votre région vis à vis
du repère triangulaire situé sur le
panneau.
Pour obtenir des informations sur
l'assemblage du support du
clavier, reportez-vous aux
instructions à la fin de ce manuel.
—Verifique la alimentación de
corriente—
ESPAÑOL
IMPORTANT
FRANÇAIS
MODE D’EMPLOI
Para información sobre el
montaje del soporte del teclado,
consulte las instrucciones al final
de este manual.
EN
DE
FR
ES
Introduction
SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these
graphics on the enclosure. The explanation of these
graphics appears on this page. Please observe all cautions
indicated on this page and those indicated in the safety
instruction section.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the product.
The lightning flash with arrowhead
symbol, within the equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical
shock.
Battery Notice: This product MAY contain a small non-
rechargable battery which (if applicable) is soldered in
place. The average life span of this type of battery is
approximately five years. When replacement becomes
necessary, contact a qualified service representative to
perform the replacement.
Warning: Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away
from children. Dispose of used batteries promptly and as
regulated by applicable laws. Note: In some areas, the
servicer is required by law to return the defective parts.
However, you do have the option of having the servicer
dispose of these parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and
federal regulations that relate to the disposal of products
that contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates the location of the name plate. The model number,
serial number, power requirements, etc., are located on
this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided
below and retain this manual as a permanent record of
your purchase.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is
properly installed and used in its normal and customary
manner, all foreseeable risks have been eliminated. DO
NOT modify this unit or commission others to do so
unless specifically authorized by Yamaha. Product performance and/or safety standards may be diminished.
Claims filed under the expressed warranty may be denied
if the unit is/has been modified. Implied warranties may
also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves
the right to change or modify any of the specifications
without notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
92-469 1 (bottom)
CLP-370/340/330, CLP-S308/S306
Model
Serial No.
Purchase Date
Thank you for purchasing the Yamaha Clavinova! We recommend that you read this manual carefully so that you can
fully take advantage of the advanced and convenient functions of the Clavinova.
We also recommend that you keep this manual in a safe and handy place for future reference.
About this Owner’s Manual and Data List
The documentation and reference materials for this instrument consist of the following:
Owner’s Manual (this book)
Reference (page 16):
This section explains how to make detailed settings for the Clavinova’s various functions.
Appendix (page 98):
This section introduces reference material.
ENGLISH
Introduction (page 2):
Please read this section first.
Data List
You can download various MIDI-related reference materials, such as the MIDI Data Format and MIDI Implementation
Chart, from the Yamaha Manual Library.
Connect to the Internet, visit the following website, type the model name of your instrument (such as “CLP-370”) in the
Model Name text box, then click the Search button.
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
* The models CLP-370/340/330, CLP-S308/S306 will be referred to as the CLP/Clavinova in this owner’s manual.
* The illustrations and LED displays shown in this owner’s manual are for instructional purposes only and may appear somewhat different from those on your instrument.
* The panel illustrations shown in this owner’s manual are taken from the CLP-370.
* Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited
except for your personal use.
(CLP-370/340, CLP-S308/S306) AVE-TCP™, a TCP/IP protocol stack by ACCESS Co., Ltd., is installed in this product.
Copyright © 1997-2008 ACCESS CO., LTD.
(CLP-370/340, CLP-S308/S306) AVE™-SSL, an encryption module technology by ACCESS Co., Ltd., is installed in this
product.
Copyright © 1997-2008 ACCESS CO., LTD.
COPYRIGHT NOTICE
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has
license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE
data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted
under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
Trademarks:
• Windows is a registered trademark of Microsoft® Corporation in the United States and other countries.
• SmartMedia is a trademark of Toshiba Corporation.
• All other trademarks are the property of their respective holders.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
3
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
ENGLISH
Power supply/Power cord
Water warning
• Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
• Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
• Use only the supplied power cord/plug.
• Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on
it, or place it in a position where anyone could walk on, trip over, or roll anything
over it.
• Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings. If any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.
Fire warning
• Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
Do not open
• Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
If you notice any abnormality
• If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the instrument inspected
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Power supply/Power cord
Location
• When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
• Remove the electric plug from the outlet when the instrument is not to be used
for extended periods of time, or during electrical storms.
• Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
• Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment,
mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
• Do not place the instrument in an unstable position where it might accidentally
fall over.
Assembly
• Before moving the instrument, remove all connected cables.
• Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.
• When setting up the product, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still flowing to the product at the minimum
level. When you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
• Do not place the instrument against a wall (allow at least 3 cm/one-inch from
the wall), since this can cause inadequate air circulation, and possibly result in
the instrument overheating.
(1)B-12
4
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
1/2
• Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Connections
• Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all
components, set all volume levels to minimum. Also, be sure to set the volumes
of all components at their minimum levels and gradually raise the volume
controls while playing the instrument to set the desired listening level.
• Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Using the bench (If included)
• (For polish-finished model) Gently remove dust and dirt with a soft cloth. Do
not wipe too hard since small particles of dirt can scratch the instrument’s
finish.
• When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths.
Handling caution
• Do not place the bench in an unstable position where it might accidentally fall
over.
• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or for any other purpose might result in accident or injury.
• Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
• Do not attempt to adjust the bench height while sitting on the bench, since this
can cause excessive force to be imposed on the adjustment mechanism,
possibly resulting in damage to the mechanism or even injury.
• If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
• Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in any gaps on the key cover or instrument.
• Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
• Do not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
• (For polish-finished model) Bumping the surface of the instrument with metal,
porcelain, or other hard objects can cause the finish to crack or peel. Use
caution.
Saving data
ENGLISH
Maintenance
Saving and backing up your data
• Data in the instrument’s internal memory can be lost due to operational errors or
malfunction. Be sure to save any important data to external media via a
computer connected to the instrument. (page 78)
Backing up the USB Storage device
• To protect against data loss through media damage, we recommend that you
save your important data onto two USB storage devices.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Even when the power is turned off, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you
unplug the power cord from the wall AC outlet.
(1)B-12
2/2
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
5
Accessories
• “50 greats for the Piano” (Music Book)
• Owner’s Manual
This manual contains complete instructions for operating your Clavinova.
• Accessory CD-ROM for Windows
• Accessory CD-ROM for Windows Installation Guide
• Bench
A bench may be included or optional, depending on your locale.
• My Yamaha Product User Registration
ENGLISH
The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
Tuning
Unlike an acoustic piano, the Clavinova does not need to be tuned. It always stays perfectly in tune.
Transporting
If you move to another location, you can transport the Clavinova along with your other belongings. You can move the unit as
it is (assembled) or you can disassemble the unit.
Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument
to excessive vibration or shock.
CAUTION
(CLP-S308/S306) Cover the entire keyboard with the protective sheet (page 87) packaged with the instrument before closing
the key cover. The sheet will protect the keyboard from being scratched when the instrument is transported.
6
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Features
Highly evolved touch and expression: Graded Hammer 3 (GH3) keyboard (CLP-330)
and Graded Hammer 3 (GH3) keyboard with artificial ivory top (CLP-340, CLP-S306)
The Graded Hammer keyboard features natural grand-piano type key weights (heavier in the low range and lighter in
the higher range) providing a pleasant playability that is unmatched by conventional electronic pianos.
Ultimate natural playability: Natural Wood (NW) keyboard with artificial ivory top
(CLP-370, CLP-S308)
ENGLISH
The Graded Hammer keyboard also offers superb playability for legato (without pedal operation) and repetitivestriking techniques, as with a grand piano. The CLP-340 and CLP-S306 feature an “artificial ivory” keyboard top,
which simulates the moderate hygroscopic characteristics of real ivory and offers a less slippery surface, smooth key
movement, and a warm and inviting color.
In addition to the features offered by the GH3 keyboard with artificial ivory top model, the NW keyboard uses natural
wood for the inside of the white keys, as seen on an acoustic piano. This feature provides a heavier weighted touch
that surpasses that of conventional electronic pianos and is closer in feel to a grand piano.
Digital recording of a full-size concert grand piano sound (via AMW Dynamics
Stereo Sampling)
This digital piano offers a rich and versatile range of sounds, which are created using Yamaha's proprietary sampling
tone-generation system, “AWM Dynamic Stereo Sampling.”
AWM (Advanced Wave Memory) is a sampling system that creates sounds close to those of an acoustic instrument by
digitally recording the sounds of an instrument and applying high-quality digital filtering technology to the recorded
audio samples.
The sound waveform created by an acoustic piano differs depending on the player's strength of touch, from
pianissimo to fortissimo.
AWM Dynamic Stereo Sampling can create extremely dynamic nuances by recording samples at various playing
strengths. The greater the number of samples used, the greater the resulting expressiveness of the instrument.
The piano voice “Grand Piano 1” features a totally new sample recorded from a full-size concert grand piano. Each
note in the sample has been adjusted meticulously so that the digital piano will play only the very best piano sounds.
The piano voices are well-separated sounds featuring a fast attack and a satisfying response.
The “Grand Piano 1” voice features multiple wave samples for different velocities (Dynamic Sampling). That is,
different samples are used depending on how fast or strong the player strikes the keys. Therefore, this voice
expresses detailed dynamics and sounds much closer to those of a true acoustic piano.
The CLP-370/340 creates a rich, luxurious sound using “Sustain Sampling,” which is a sample of the soundboard
and the resonance of the strings when the damper pedal is pressed. The instrument also features “Key-off Sampling,”
which is a sample of the very delicate noises that are caused when keys are released.
Internet Direct Connection function (CLP-370/340, CLP-S308/S306)
You can connect these digital piano models to the Internet, enabling you to access and enjoy a broad range of song
data files that are available on a dedicated website.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
7
Table of Contents
ENGLISH
Introduction
About this Owner’s Manual and Data List.............................................................................. 3
Accessories............................................................................................................................... 6
Panel Controls and Terminals ............................................................................................... 10
Before Using the Clavinova................................................................................................... 12
Key Cover ..................................................................................................................................................... 12
Music Rest .................................................................................................................................................... 13
Music Braces (CLP-370/340) ...................................................................................................................... 14
Turning the Power On ................................................................................................................................ 14
Setting the Volume ...................................................................................................................................... 15
Using Headphones....................................................................................................................................... 15
Using the Speaker Switch ............................................................................................................................ 15
Listening to the Demonstration Tunes ................................................................................. 16
Reference
Listening to 50 Piano Preset Songs ...................................................................................... 17
Practicing a One-Hand Part Using the 50 Preset Songs (Part Cancel Function) .................................... 18
A-B Repeat for 50 Preset Songs................................................................................................................... 19
Selecting & Playing Voices .................................................................................................... 20
Selecting Voices............................................................................................................................................ 20
Using the Pedals........................................................................................................................................... 21
Adding Variations to the Sound — [VARIATION] (CLP-370/340)/[BRILLIANCE]/[REVERB]/
[EFFECT]/[DAMPER RES.] ....................................................................................................................... 22
Touch Sensitivity — [TOUCH].................................................................................................................. 24
Transposition — [TRANSPOSE] ............................................................................................................... 25
Combining Two Voices (Dual mode) ........................................................................................................ 26
Splitting the Keyboard Range and Playing Two Different Voices (Split mode) (CLP-370/340) ............ 27
Using the Metronome ................................................................................................................................. 29
Recording Your Performance................................................................................................ 30
Recording a performance quickly............................................................................................................... 30
Playing back a recorded song ...................................................................................................................... 32
Re-recording a previously recorded song................................................................................................... 32
Recording to RIGHT/LEFT parts ............................................................................................................... 33
Changing the Initial Settings (Data recorded at the beginning of a song) ............................................... 35
Handling Songs with a USB Storage Device......................................................................... 36
About Save and Load................................................................................................................................... 36
Saving a Song ............................................................................................................................................... 37
Loading a Song............................................................................................................................................. 38
Deleting Song Files ...................................................................................................................................... 39
Formatting the USB Storage Device ........................................................................................................... 40
Handling the USB Storage Device (USB Flash Memory/Floppy Disk, etc.) ............................................ 41
Handling the Floppy Disk Drive (FDD) and Floppy Disks....................................................................... 42
Playing Back Songs................................................................................................................ 43
Playing Back User/External Songs on the Instrument............................................................................... 44
Playing Back User Songs from a USB Storage Device ............................................................................... 45
Useful Playback Functions .......................................................................................................................... 45
8
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
ENGLISH
Internet Direct Connection (CLP-370/340, CLP-S308/S306) ............................................... 46
Setting up the Instrument for Internet Connection .................................................................................. 46
Connecting the Instrument to the Internet................................................................................................ 48
About the Internet Settings ......................................................................................................................... 49
Checking the field strength (when using a USB wireless LAN adaptor) .................................................. 51
Exporting the Connection Information ..................................................................................................... 52
Other Internet Operations .......................................................................................................................... 53
Listening to the Songs on Internet (CLP-370/340, CLP-S308/S306) ................................... 56
Glossary of Internet Terms.......................................................................................................................... 57
Initializing the data...................................................................................................................................... 58
Detailed Settings — [FUNCTION] ......................................................................................... 59
Basic Procedure in Function Mode ............................................................................................................ 60
About Each Function................................................................................................................................... 62
F1. Fine Tuning of the Pitch.................................................................................................................. 62
F2. Selecting a Scale ............................................................................................................................... 63
F3. Dual Mode Functions...................................................................................................................... 64
F4. (CLP-370/340) Split Mode Functions ............................................................................................ 65
F5. (CLP-370/340) / F4. (CLP-S308/S306, CLP-330) Other Functions .............................................. 66
F6. (CLP-370/340) / F5. (CLP-S308/S306, CLP-330) Metronome Volume ....................................... 67
F7. (CLP-370/340) / F6. (CLP-S308/S306, CLP-330) MIDI Functions .............................................. 67
F8. (CLP-370/340) / F7. (CLP-S308/S306, CLP-330) Backup Functions............................................ 70
F8.5 (CLP-370/340)/ F7.5 (CLP-S308/S306, CLP-330) Character Code ............................................ 70
F9. (CLP-370/340)/ F8. (CLP-S308/S306) LAN Settings ..................................................................... 70
Connections........................................................................................................................... 71
Connectors ................................................................................................................................................... 71
Connection to a USB storage device........................................................................................................... 73
Connecting a Personal Computer .............................................................................................................. 75
Transmitting Song Data between the Computer and the Instrument ................................ 76
Loading Song Data from a Computer to the Instrument.......................................................................... 76
Transmitting Song Data from the Instrument to a Computer ................................................................. 77
Data Backup........................................................................................................................... 78
Message List .......................................................................................................................... 79
Troubleshooting .................................................................................................................... 80
Options .................................................................................................................................. 80
CLP-370: Keyboard Stand Assembly ..................................................................................... 81
CLP-340/330: Keyboard Stand Assembly ............................................................................. 84
CLP-S308/S306: Keyboard Stand Assembly.......................................................................... 87
Installing the Optional Floppy Disk Drive (CLP-370/340) .................................................... 91
Preset Voice List .................................................................................................................... 92
Demo Song List ..................................................................................................................... 95
Index...................................................................................................................................... 96
Appendix
Factory Setting List................................................................................................................ 98
Specifications....................................................................................................................... 100
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
9
Panel Controls and Terminals
Panel Controls and Terminals
The panel illustrations shown are taken from the CLP-370.
2
3
4
5
6
!
8
9
)
@
*
ENGLISH
7
#
$
%
^
(
&
1
SELECT
USB TO DEVICE
CLP-370/340 only
This illustration shown is taken from the
CLP-370.
OFF
ON
NORMAL
HP. SW
SPEAKER
∞
¢
PHONES
Pedal jack for CLP-340/330 is next
to the MIDI jacks.
Pedal jack for CLP-S308/S306 is
next to the LAN Jack.
Front
CLP-370/340/330
¶
OUT
MIDI
L/L+R
AUX IN
º
£
§
CLP-370/
340 only
TO DEVICE
USB
TO HOST
R
IN
L/L+R
R
¡
AUX OUT
THRU
Shows the jacks as seen when viewed
from below the instrument.
™
(
CLP-S308/S306
CLP-370/
340 only
Front
Left
Shows the jacks as seen when viewed from below the
instrument.
10
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Right
™
£
¡
º
§
Panel Controls and Terminals
Adjust the volume level using this slider.
3 [DEMO] button ..............................page 16
Demonstration playback is available for each voice.
4 [TRANSPOSE] button.....................page 25
You can shift the pitch of the entire keyboard up or
down so that the pitch will match that of another
instrument or singer, while you play the same,
unshifted keys.
5 [REC] button .................................page 30
For recording your keyboard performance.
6 [RIGHT], [LEFT] buttons
............................................... pages 18, 33
For turning the left- and right-hand parts on or off as
required so you can practice the corresponding part
(the part that is turned off) on the keyboard.
^ [BRILLIANCE], [REVERB], [EFFECT]
buttons .......................................... page 22
For adjusting the brightness of the sound and adding
reverb effects to the sound.
& [TOUCH] button ............................ page 24
For adjusting the touch response.
* [DAMPER RES.] button ................. page 23
For turning the Damper Resonance function on or
off. When DAMPER RES. is on, the Clavinova simulates the sustain sound that occurs when you press
the damper pedal of a grand piano, as you press the
damper pedal and play the keyboard.
( USB [TO DEVICE] terminals ........... page 72
For connecting the instrument to a USB storage
device, allowing saving/loading of data to and from
the connected device. On the CLP-370 and CLP-340,
there are two TO DEVICE terminals, A and B, which
can be specified using the [SELECT] switch.
7 [PLAY/PAUSE], [STOP] buttons
............................................... pages 16, 44
º AUX OUT [L/ L+R][R] jacks ............ page 71
For playing back the preset songs or your recorded
songs, etc. You can also play back songs from the
Internet over a special website.
¡ AUX IN [L/L+R] [R] jacks ............... page 72
8 [SONG SELECT] button ......... pages 17, 56
For selecting a song to play back or edit.
9 [FILE] button ......................... pages 36, 40
For saving songs to and loading songs from a USB
storage device, as well as managing song files. Also,
lets you format a USB storage device.
) [TEMPO/FUNCTION] button
............................................... pages 29, 60
For changing the song tempo (speed) and selecting
other useful functions (pages 59 – 70).
! [METRONOME] button
............................................... pages 29, 67
For using the metronome.
@ Display............................................page 14
CAUTION
Do not turn off the power to the instrument while
flashing dashes appear in the display (indicating the
operation is in process). Doing so may damage the
data.
# [–/NO], [+/YES] buttons
For setting values or performing file operations.
Pressing both buttons simultaneously for certain
value settings (Transpose, Tempo, etc.) restores the
default value.
$ Voice group buttons ......................page 20
For selecting voices from 14 internal sounds including Grand Piano 1 and 2. You can also combine two
voices and use them together. (Only the CLP-370 and
CLP-340 has the [VARIATION] button.)
ENGLISH
1 [POWER] switch .............................page 14
2 [MASTER VOLUME] slider..............page 15
For outputting the sound of the Clavinova to an
external audio system.
For connecting an external tone generator, allowing
you to play the sound of that device via the Clavinova’s internal sound system and speakers.
™ USB [TO HOST] terminal .............. page 72
For connecting the instrument to your computer,
allowing you to transfer MIDI data between the
Clavinova and the computer.
£ MIDI [IN] [OUT] [THRU] terminals
....................................................... page 72
For connecting external MIDI devices, allowing the
use of various MIDI functions.
¢ [PHONES] jacks, [SPEAKER] switch
....................................................... page 15
For connecting a set of standard stereo headphones,
allowing private practice. The [SPEAKER] switch
turns the internal speakers on or off.
∞ PEDALS........................................... page 21
For producing a range of expressive effects similar to
those produced by the pedals on an acoustic piano.
The left pedal can also be assigned to a variety of
functions.
§ [LAN] jack (CLP-370/340, CLP-S308/S306)
....................................................... page 72
For connecting a LAN cable to access special Internet
websites for this instrument, and playing songs from
the Internet.
¶ [PEDAL] jack .................................. page 83
For connecting a pedal cable.
% [SPLIT] button (CLP-370/340) .......page 27
For playing different voices on the left- and righthand sections of the keyboard.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
11
Before Using the Clavinova
Before Using the Clavinova
Key Cover
CLP-370/340/330
To open the key cover:
Lift the cover slightly, then push and slide it open.
To close the key cover:
ENGLISH
Slide the cover toward you and gently lower the cover over
the keys.
Be careful to avoid catching your
fingers when opening or closing the
cover.
CLP-S308/S306
To open the key cover:
To close the key cover:
1. Hold the front edge of the key cover top with both
hands, then open the key cover slowly.
1. If the music rest is unfolded, fold it back.
CAUTION
Be careful not to pinch your fingers (or those of children)
when opening or closing it.
2. Close the edge of the key cover. (Fold it down so that it
is flat with the cover.)
2. Unfold the edge of the key cover.
3. Hold the key cover with both hands and close it
slowly.
CAUTION
Be careful not to pinch your fingers (or those of children)
when opening or closing it.
12
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Before Using the Clavinova
CAUTION
Be careful not to pinch your fingers or the fingers of child when opening or closing it.
CAUTION
Do not place objects such as a piece of metal or paper on top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the instrument.
CAUTION
Disconnect the optional USB storage device connected to the USB [TO DEVICE] A terminal before closing the key
cover. Closing the cover with the device still connected may damage the device.
ENGLISH
CAUTION
(CLP-S308/S306) When transporting the instrument, cover the entire keyboard with the protective sheet (page 87)
before closing the key cover. The sheet will protect the keyboard from being scratched.
Music Rest
CLP-370/340/330
To raise the music rest:
1. Pull the music rest up and toward yourself as far as it will go.
2. Flip down the two metal supports at the left and right on the rear
of the music rest.
3. Lower the music rest so that it rests on the metal supports.
To lower the music rest:
1. Pull the music rest toward yourself as far as it will go.
2. Raise the two metal supports (at the rear of the music rest).
3. Gently lower the music rest backward until it is all the way down.
CAUTION
Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from the music rest
until it is all the way down.
CLP-S308/S306
Unfold the music rest
When opening the key cover, unfold the music rest.
Fold the music rest
When closing the key cover, fold the music rest.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
13
Before Using the Clavinova
Music Braces (CLP-370/340)
These braces are for holding the pages of music books in place.
To open
To close
ENGLISH
Turning the Power On
1.Connect the power cord.
Insert the plugs at the ends of the cord, one into the AC IN on the Clavinova, and the other into a standard AC outlet.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
1-1
CLP-370/340/330
Shows the AC IN as
seen when viewed from
below the instrument.
(bottom surface)
1-2
(The shape of plug differs
depending on locale.)
CLP-S308/S306
AC IN is located on the
rear of the instrument.
WARNING
Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used (voltage rating appears on
the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main
keyboard unit near the AC IN. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to
the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard!
Use only the AC power cord supplied with the Clavinova. If the supplied cord is lost or damaged and needs to be replaced,
contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
The type of AC power cord provided with the Clavinova may be different depending on the countr y in which it is purchased.
(In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT
modify the plug provided with the Clavinova. If the plug will not fit the outlet, have a proper outlet installed by a qualified
electrician.
2.Turn the power on.
Press the [POWER] switch.
• The display located in the center of the front panel and the power indicator located below the left end of the keyboard lights up.
[POWER] switch
Power indicator
Display
Normally indicates tempo.
When you’re ready to turn off the power, press the [POWER] switch again.
• The display and the power indicator turn off.
NOTE
Power indicator
If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is
still on.
14
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Before Using the Clavinova
Setting the Volume
Initially set the [MASTER VOLUME] slider about halfway between the “MIN” and “MAX” settings. Then, when you
start playing, re-adjust the [MASTER VOLUME] slider to the most comfortable listening level.
The level decreases.
The level increases.
CAUTION
Do not use the Clavinova at a high volume level for a long period of time; doing so may damage your hearing.
TERMINOLOGY
MASTER VOLUME:
NOTE
You can also adjust the [PHONES] output level and the AUX OUT level using the [MASTER VOLUME] slider.
Using Headphones
Connect a pair of headphones to one of the
[PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones,
you can plug them into either jack.)
ENGLISH
The volume level of the entire keyboard sound.
bottom surface
OFF
ON
NORMAL
HP. SW
SPEAKER
standard
stereo
phone plug
PHONES
Using the Headphone Hanger
A headphone hanger is included in the Clavinova package so that you can conveniently hang the headphones
on the Clavinova. Install the headphone hanger using
included two screws (4 x 10mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on
the hanger. Doing so may damage the Clavinova or the
hanger.
Using the Speaker Switch
OFF
This switch turns the internal speakers on or off.
NORMAL (HP. SW) ......... The speakers produce sound as long as a pair of
headphones is not connected.
ON ....................................... The speakers always produce sound.
OFF ...................................... The speakers produce no sound.
ON
NORMAL
HP. SW
SPEAKER
PHONES
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
15
Reference
Listening to the Demonstration Tunes
Listening to the Demonstration Tunes
Demonstration tunes are provided that effectively demonstrate each of the Clavinova’s voices.
1
2 4
4
3
3
CLP-370
ENGLISH
Procedure
1. Turn the power on.
(In case the power is not turned ON) Press the [POWER] switch.
When the power is turned ON, one of the voice button LEDs will light.
Initially set the [MASTER VOLUME] slider about half way between the “MIN”
and “MAX” settings. Then, when you start playing, re-adjust the [MASTER
VOLUME] slider to the most comfortable listening level.
2. Engage Demo mode.
Press the [DEMO] button to engage Demo mode. The voice button indicators
will flash in sequence.
3. Play a Voice demo.
Press one of the voice buttons to start playback of all songs starting from the
corresponding voice demo tune — featuring the voice normally selected by that
voice button. (If you press the SONG [PLAY/PAUSE] button instead of a voice
button or only waiting (not press any keys) a short while, the GRAND PIANO 1
demo tune will begin playback.)
4. Stop the Voice demo and exit from Demo mode.
Press the [DEMO] or SONG [STOP] button.
NOTE
For a list of the demo songs, see
page 95.
NOTE
MIDI reception is not possible in
Demo Song mode.
Demo song data is not transmitted
via the MIDI terminals.
NOTE
Demo mode cannot be engaged
during User song recording
(page 30) or file operations (page
36).
TERMINOLOGY
Mode:
A mode is a status under which
you can execute a certain function.
In Demo mode, you can play back
demonstration tunes.
NOTE
You cannot adjust the tempo of
demo songs.
You cannot use the part cancel
function (page 18) or the song
A-B repeat function (page 19) in
Demo mode.
NOTE
On the CLP-370/340, you can
demo the piano voices with various effects by pressing the
[VARIATION] button, then pressing the desired voice button.
Refer to the “Piano Voice Demo
Description” on page 95 for the
complete list of demo sounds for
the piano voices with various
effects.
16
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Listening to 50 Piano Preset Songs
Listening to 50 Piano Preset Songs
The Clavinova provides performance data of 50 piano songs. You can simply listen to these songs
or use them for practice (page 18). You can also refer to the included “50 greats for the Piano” that
contains scores for the 50 piano preset songs.
3 2 -2 1 4
2 -1
ENGLISH
CLP-370
Procedure
1. Engage Preset Song mode.
Press the [SONG SELECT] button a few times until the “PRESET” indicator
lights.
2. Play any of the 50 preset songs.
2-1
2-2
Press the [–/NO], [+/YES] buttons to select a number of the tune you want to
play (the number will appear on the LED display) or select a playing method.
1 – 50:
Select a preset song number and play only the song.
r n d:
Play all preset songs continuously in random order.
ALL:
Play all preset songs in sequence.
Press the SONG [PLAY/PAUSE] button to start playback.
Adjust the Volume
You can play the keyboard along
with the preset song. You can
change the voice playing on the
keyboard.
Adjust the Tempo
3. Stop playback.
TERMINOLOGY
Song:
Performance data is called a
“Song.” This includes demonstration tunes and piano preset tunes.
NOTE
Use the [MASTER VOLUME] control to adjust the volume.
You can use the [TEMPO/FUNCTION ▼,
▲] buttons to adjust the playback tempo
as required. The default tempo can be
recalled by simultaneously pressing the
[▼] and [▲] buttons.
NOTE
Preset Song mode cannot be
engaged while the unit is in Demo
Song mode (page 16) or during
song playback (page 44), User
song recording (page 30), or file
operations (page 36).
NOTE
This produces a relative tempo variation, with a range from “–50” through
“0” to “50” at maximum; the range will
differ depending on the selected
song.
Playback will stop automatically when the selected preset song has finished. To
stop the song during playback (or continuous playback), press the SONG
[STOP] button. You can also pause playback by pressing the SONG [PLAY/
PAUSE] button.
• To play back another song continuously, see procedure 2 above.
4. Exit from Preset Song mode.
Press the [SONG SELECT] button to exit Preset Song mode. The indicator
turns off, and the unit returns to normal play mode.
How to use the practice functions
You can turn the left- and right-hand parts on or off as required so you can practice the
corresponding part (part cancel function) and continuously repeat a specified phrase
within a song (song A-B repeat function). For more information, see pages 18–19.
You can adjust the Brilliance control (page 22) and Reverb type
(page 22) that is applied to preset
song playback.
You can change the Effect settings (page 23) and Touch sensitivity (page 24) for the keyboard
voice you play.
NOTE
The default tempo “0” is automatically selected whenever a new
preset song is selected, or when
playback of a new preset song
begins during “ALL” or “r n d”
playback.
NOTE
When you select a different song
(or a different song is selected
during chained playback), appropriate reverb and effect types will
be selected accordingly.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
17
Listening to 50 Piano Preset Songs
Practicing a One-Hand Part Using the 50 Preset Songs
(Part Cancel Function)
The 50 preset songs have separate left- and right-hand parts on individual parts. You can turn the
left- and right-hand parts on or off as desired, in order to practice the corresponding part (the part
that is turned off) on the keyboard. The right-hand part is played by [RIGHT] and the left-hand part
is played by [LEFT].
ENGLISH
3 1 2
CLP-370
Procedure
1. Turn off the playback part you wish to practice.
After you select a song to practice, press the [RIGHT] or [LEFT] button to turn
off the corresponding part.
When you first select a song, both [RIGHT] and [LEFT] indicators light up, indicating that you can play back both parts. When you press one of the buttons to
turn off playback, the corresponding button indicator turns off and the corresponding part playback is muted.
• Pressing the buttons repeatedly toggles playback between on and off.
NOTE
The Preset Song Part Cancel
function cannot be used during
“ALL” or “r n d” (page 17) playback.
NOTE
The parts can be turned on or off
even during playback.
2. Start playback and playing.
Press the SONG [PLAY/PAUSE] button to start playback. Play the part you
just turned off.
Starting playback automatically as you start playing the keyboard
(Sync Start)
When the Sync Start function is engaged, playback of the selected preset song will
begin automatically as soon as you start playing on the keyboard.
To engage the Sync Start function, simultaneously hold down the SONG [STOP]
and press the [PLAY/PAUSE] button.
(Repeat the previous operation to disengage the Sync Start function.)
Playback will then start as soon as you begin playing on the keyboard.
Left Pedal Play/Pause
The left pedal can be assigned to play and pause preset song playback via the
“Left Pedal Mode” function described on page 66.
3. Stop playback.
When playback is complete, it automatically stops and the Clavinova locates the
top of the song. If you wish to stop playback in the middle of a song, press the
SONG [STOP] button. You can also pause playback by pressing the SONG
[PLAY/PAUSE] button.
18
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
Both parts are automatically
turned ON whenever a new song
is selected.
Listening to 50 Piano Preset Songs
A-B Repeat for 50 Preset Songs
The A-B Repeat function can be used to continuously repeat a specified phrase within a preset song.
Combined with the Part Cancel function described on page 18, this provides an excellent way to
practice difficult phrases.
2
1
ENGLISH
CLP-370
Procedure
1. Specify the beginning (A) and the end (B) of the
phrase, and start practicing.
Select and play a preset song, then press the [TEMPO/
FUNCTION] button at the beginning of the phrase
you want to repeat.
This sets the “A” point (
play).
NOTE
The A-B Repeat function cannot
be used during “ALL” or “r n d”
(page 17) playback.
will appear on the dis-
NOTE
To specify the end (B) of the phrase, press the
[TEMPO/FUNCTION] button a second time at the
end of the phrase.
• To set the “A” point at the very
beginning of the song, press
the [TEMPO/FUNCTION] button before starting playback.
• You can have the B point automatically be set to the song’s
end, by setting the A point and
letting the song play to the end.
This sets the “B” point (
will appear on the display).
At this point, repeat playback will begin between the
specified A and B points.
NOTE
An automatic lead-in (to help
guide you into the phrase) starts
at the A point of the song.
2. Stop playback.
Press the SONG [STOP] button to stop playback while retaining the specified
A and B points. A-B repeat playback will resume if you press the SONG [PLAY/
PAUSE] button.
To cancel the A and B points, press the [TEMPO/FUNCTION] button once.
NOTE
The A and B points are automatically canceled when a new song
is selected.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
19
Selecting & Playing Voices
Selecting & Playing Voices
Selecting Voices
Voice buttons
ENGLISH
CLP-370
Procedure
Select the desired voice by pressing one of the Voice buttons.
Then, when you start playing, re-adjust the [MASTER VOLUME] slider for the most
comfortable listening level.
NOTE
To learn characteristics of the
voices, listen to demo songs for
each voice (page 16). Refer to
“Preset Voice List” on page 92 for
more information on the characteristics of each preset voice.
TERMINOLOGY
Voice:
On the Clavinova, a voice means
a “tone” or “tonal color.”
NOTE
You can control the loudness of a
voice by adjusting the force with
which you strike the keys,
although different playing styles
(touch sensitivities) have little or
no effect with certain musical
instruments.
Refer to “Preset Voice List” on
page 92.
20
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Selecting & Playing Voices
Using the Pedals
The Clavinova has three foot pedals that produce a range
of expressive effects similar to those produced by the
pedals on an acoustic piano.
Sostenuto (Center) Pedal
If you play a note or chord on the keyboard and press the
sostenuto pedal while the note(s) are held, those notes
will sustain as long as you hold the pedal (as if the
damper pedal had been pressed) but all subsequently
played notes will not be sustained. This makes it possible
to sustain a chord, for example, while other notes are
played “staccato.”
When you press the damper
pedal here, the notes you
play before you release the
pedal have a longer sustain.
TERMINOLOGY:
Half-pedal:
While playing the piano with Sustain and you want to slightly mute
the sustained sound, release the
damper pedal from maximum
position to half position.
NOTE
The depth of the effect produced
by the “Sustain Samples” can be
adjusted via the “Sustain Sample
Depth” (page 66) in Function
mode.
ENGLISH
Damper (Right) Pedal
The damper pedal functions in the same way as a
damper pedal on an acoustic piano. When the damper
pedal is pressed, notes sustain longer. Releasing the pedal
immediately stops (damps) any sustained notes.
The damper pedal also features a naturally expressive
half-pedal function.
When DAMPER RES. is on, the Clavinova simulates the
sustain sound that occurs when you press the damper
pedal of a grand piano, as you press the damper pedal
and play the keyboard.
NOTE
If the damper pedal doesn’t work,
make sure that the pedal cord is
properly plugged into the jack
(pages 83, 86).
NOTE
Organ, string and choir voices will
continue to sound for as long as
the sostenuto pedal is depressed.
When you press the sostenuto pedal here while holding the note, the note will
sustain as long as you hold
the pedal.
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of notes played while
the pedal is pressed. The soft pedal will not affect notes that are already playing when it
is pressed.
NOTE
The left pedal can be assigned to
song play/pause operation or
variation function (CLP-370/340)
via the “Left Pedal Mode”
described on page 66.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
21
Selecting & Playing Voices
Adding Variations to the Sound — [VARIATION]
(CLP-370/340)/[BRILLIANCE]/[REVERB]/[EFFECT]/
[DAMPER RES.]
[–/NO] [+/YES]
buttons
[VARIATION] button
[REVERB]
button
[DAMPER RES.]
button
ENGLISH
CLP-370
[BRILLIANCE]
button
[EFFECT]
button
[VARIATION] (CLP-370/340)
Lets you alter another aspect of the effect, depending on the selected type.
Refer to “Preset Voice List” on page 92 for more information on the characteristics of
each variation.
Procedure
Pressing the [VARIATION] or selected voice button toggles the variation on and off.
The indicator lights (ON) when [VARIATION] is enabled.
[BRILLIANCE]
This control can be used to change the tonality or “timbre” of the sound output.
BRIGHT:
NORMAL:
MELLOW:
Bright tone
Standard tone
Soft and mellow tone
NOTE
Normal setting = OFF
TERMINOLOGY
Normal setting:
The “Normal setting” refers to the
default setting (factory setting)
obtained when you first turn on
the power to the Clavinova.
NOTE
The left pedal can be assigned to
ON or OFF the variation via the
“Left Pedal Mode” function
described on page 66.
NOTE
Normal setting = NORMAL
Procedure
To select a brilliance type, press the [BRILLIANCE] button a few times until the indicator corresponding to the desired type lights (the indicator lights in sequence each time
you press the [BRILLIANCE] button). Brilliance can be selected among five types. When
two adjacent indicators are lit, the type that is between the two indicated types is
selected. For example, when both NORMAL and MELLOW are lit, the brilliance setting between NORMAL and MELLOW is selected. This parameter affects the entire
sound of the instrument.
NOTE
When the BRILLIANCE is set to
BRIGHT, the overall sound will be
slightly louder. If the MASTER
VOLUME is set at a high level the
sound may become distorted. If
so, lower the MASTER VOLUME
level.
[REVERB]
This control enables you to select various digital reverb effects that would add extra
depth and expression to the sound to create a realistic acoustic ambience.
OFF:
ROOM:
HALL 1:
HALL 2:
STAGE:
22
When no reverb effect is selected, no REVERB indicator is lit.
This setting adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a small-size concert hall.
For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall.
Simulates the reverb of a stage environment.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
The default reverb type (including
OFF) and depth settings are different for each voice.
NOTE
Releasing the [REVERB] button
changes the reverb type.
If you have changed the reverb
depth, releasing the [REVERB]
button will not change the reverb
type.
Selecting & Playing Voices
Procedure
To select an reverb type, press the [REVERB] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time you
press the [REVERB] button). No effect is produced when all indicators are off.
NOTE
Depth 0: no effect
Depth 20: maximum reverb depth
[EFFECT]
The [EFFECT] button allows you to select an effect to give your sound greater depth
and animation.
OFF:
CHORUS:
PHASER:
TREMOLO:
ROTARY SP:
When no effect is selected, no EFFECT indicator is lit.
A shimmering, broadening effect
Adds a sweeping effect to the sound.
Tremolo effect
Adds the vibrato effect of a rotary speaker.
NOTE
The default effect type (including
OFF) and depth settings are different for each voice.
ENGLISH
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by using the [–/NO] [+/YES] buttons
while holding the [REVERB] button. The depth range is from 0 through 20. The current depth setting appears on the LED display while the [REVERB] button is held.
NOTE
Releasing the [EFFECT] button
changes the effect type.
If you have changed the depth
settings, releasing the [EFFECT]
button will not change the effect
type.
Procedure
To select an effect type, press the [EFFECT] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time you press
the [EFFECT] button). No effect is produced when all indicators are off.
Adjusting Effect Depth
You can adjust the effect depth for the selected voice by using the [–/NO] and [+/YES]
buttons while holding the [EFFECT] button.
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the [EFFECT] button is held.
NOTE
Depth 0: no effect
Depth 20: maximum effect depth
NOTE
Default depth settings are different for each voice.
[DAMPER RES.]
The Damper Resonance lets you hear a simulation of the sustain sound of the damper
pedal on a grand piano, as you press the damper pedal and play the keyboard.
This effect is applied to the entire sound of the instrument.
NOTE
Procedure
Normal setting = ON
Pressing the [DAMPER RES.] button repeatedly toggles the Damper Resonance on and
off.
Adjusting DAMPER RES. Depth
You can adjust the Damper Resonance depth by using the [–/NO] and [+/YES] buttons
while holding the [DAMPER RES.] button.
The depth range is from 0 through 20. The current depth setting appears on the LED
display while the [DAMPER RES.] button is held.
NOTE
Depth 0: no effect
Depth 20: maximum depth
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
23
Selecting & Playing Voices
Touch Sensitivity — [TOUCH]
You can select four different types of keyboard touch sensitivity — HARD, MEDIUM, SOFT or FIXED
— to match different playing styles and preferences.
HARD:
MEDIUM:
SOFT:
FIXED:
Requires that the keys be played quite hard to produce maximum loudness.
Produces a fairly “standard” keyboard response.
Allows maximum loudness to be produced with relatively light key pressure.
All notes are produced at the same volume no matter how hard the keyboard
is played. (No indicators are lit.) The fixed volume can be changed.
NOTE
This setting does not change the
weight of the keyboard.
NOTE
Normal setting = MEDIUM
NOTE
ENGLISH
The touch sensitivity type will
become the common setting for
all voices. However, the touch
sensitivity settings may have little
or no effect with certain voices
that are not normally responsive
to keyboard dynamics. (Refer to
the “Preset Voice List” on page
92.)
[–/NO] [+/YES] buttons
[TOUCH] button
CLP-370
Procedure
To select a touch sensitivity type press the [TOUCH] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time
the [TOUCH] button is pressed). No indicator is lit when “FIXED” is selected.
Changing the volume when FIXED is selected
When you select FIXED, you can set the volume for notes played
in FIXED mode by using the [–/NO] and [+/YES] buttons while
you hold the [TOUCH] button. The current volume level
appears on the display. The volume range is from 1 through 127.
The default setting is 64.
NOTE
1: minimum volume
127: maximum volume
Volume range
NOTE
The touch volume set in FIXED
mode will become the common
setting for all voices.
NOTE
Releasing the [TOUCH] button
changes the touch type.
If you have changed the volume,
releasing the [TOUCH] button will
not change the touch type.
(FIXED mode will remain
selected.)
24
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Selecting & Playing Voices
Transposition — [TRANSPOSE]
The Clavinova’s Transpose function makes it possible to shift the pitch of the entire keyboard up or
down in semitone intervals to facilitate playing in difficult key signatures, and to let you easily
match the pitch of the keyboard to the range of a singer or other instruments. For example, if you
set the transposition amount to “5,” playing a C key produces a pitch of F. In this way, you can play
a song as though it were in C major, and the Clavinova will transpose it to F major.
[–/NO] [+/YES] buttons
CLP-370
Procedure
Use the [–/NO] and [+/YES] button while holding the
[TRANSPOSE] button to transpose down or up as required.
The amount of transposition appears on the LED display
while the [TRANSPOSE] button is held. The default transpose
setting is “0.”
ENGLISH
[TRANSPOSE] button
TERMINOLOGY
Transposition
The [TRANSPOSE] button indicator remains lit when a transpose setting other than “0”
is selected. If a value other than “0” is selected, the [TRANSPOSE] button can be
switched the transpose function ON or OFF at any time.
Transpose:
Change the key signature of a
song. On the Clavinova, transposing shifts the pitch of the entire
keyboard.
NOTE
The transposition range:
–12: –12 semitones (down one
octave)
0: normal pitch
12: 12 semitones (up one octave)
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
25
Selecting & Playing Voices
Combining Two Voices (Dual mode)
You can play two voices simultaneously across the entire range of the keyboard. In this way, you
can simulate a melody duet or combine two similar voices to create a thicker sound.
1 2
ENGLISH
CLP-370
Procedure
1. Engage Dual mode.
NOTE (CLP-370/340)
Press two voice buttons at the same time (or press one voice button while holding
another). The voice indicators of both selected voices will light when Dual mode
is active.
• According to the voice numbering
priority shown in the diagram on
the right, the lower value voice
number will be designated as Voice
1 (the other voice will be designated as Voice 2).
Voice numbering priority
1
2
3
4
5
6
7
8
9
10
11
12
13
14
The Function mode provides access to a number of other Dual mode functions,
such as volume balance setting or octave setting (page 64). (If you do not set
Dual mode functions, the appropriate setting will be set in each voice by
default.)
2. Exit Dual mode and return to normal play mode.
To return to the normal single-voice play mode, press any single voice button.
Dual and Split (page 27) modes
cannot be engaged at the same
time.
NOTE
[VARIATION] in Dual Mode
(CLP-370/340)
The [VARIATION] button’s indicator will light if the variation is
engaged for either or both of the
Dual mode voices. While Dual
mode is engaged, the [VARIATION] button can be used to turn
the variation for both voices on or
off. To turn the variation on or off
for only one of the voices, hold
the voice button for the other
voice and press the button of the
voice for which you want to
change the variation.
NOTE
[REVERB] in Dual Mode
The reverb type assigned to
Voice 1 will take priority over the
other. (If the reverb is set to OFF,
Voice 2 reverb type will be in
effect.)
NOTE
[EFFECT] in Dual Mode
Depending on the conditions, one
effect type may take priority over
the other. Depth will be decided
according to the depth default
value of the voice combination.
However, using function F3 (page
64) you can adjust the depth
value for each voice to your liking.
26
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Selecting & Playing Voices
Splitting the Keyboard Range and Playing Two Different
Voices (Split mode) (CLP-370/340)
Split mode enables you to play two different voices on the keyboard — one with the left hand and
another with the right hand. For example, you can play a bass part using the Wood Bass or Electric
Bass voice with the left hand, and a melody with the right hand.
Voice buttons
[SPLIT] button
ENGLISH
CLP-370
Procedure
1. Engage Split mode.
Press the [SPLIT] button so that its indicator lights. The default setting (WOOD
BASS) will be selected for the left-hand voice at first.
The Function mode provides access to a number of other Split mode functions
(page 65). (If you make no settings for Split mode functions, the appropriate
setting will be set in each voice by default.)
NOTE
Dual (page 26) and Split modes
cannot be engaged simultaneously.
2. Specify the split point (the border between the
right-and left-hand range).
(The split point is initially set at the F#2 key by default. If you do not need to
change the split point, skip this procedure.)
You can change the split point to any other key by pressing the key while holding the [SPLIT] button (the name of the current split-point key appears on the
LED display while the [SPLIT] button is held).
An example of split-point key display
F2
NOTE
A specified “split point” key is
included in the left-hand range.
The split point can also be
changed by simultaneously holding down the [SPLIT] button and
pressing the [–/NO] or [+/YES]
button.
The default split point can be
recalled by simultaneously holding down the [SPLIT] button and
pressing both the [–/NO] and [+/
YES] buttons together.
followed by a high bar if sharp
F#2
NOTE
The split point can also be set via
Function 4 (page 65).
Eb2
followed by a low bar if flat
A -1
C1
C2
F#2
C3
C4
C5
C6
C7
Normal setting=F#2
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
27
Selecting & Playing Voices
3. Select a voice for the right hand.
Press a voice button.
4. Select a voice for the left hand.
Press the corresponding voice button while holding the [SPLIT] button. (The
indicator of the Left Voice button will light while the [SPLIT] button is pressed.)
To turn the variation on or off for the split voice, hold the [SPLIT] button and
press the [VARIATION] button or the currently-selected voice button.
5. Exit Split mode and return to normal play mode.
NOTE
[VARIATION] in Split Mode
You can turn the variation on or off
for Split mode voices. Normally,
the voice indicator of the right
voice lights in Split mode. The
[VARIATION] can be used to turn
the variation for the right voice on
or off as required. While the
[SPLIT] button is held, however,
the voice indicator of the left voice
lights. In this state the [VARIATION] button turns the variation
for the left voice on or off.
Press the [SPLIT] button again so that its indicator goes out.
ENGLISH
NOTE
[REVERB] in Split Mode
The reverb type assigned to the
right voice will take priority over
the other. (If the reverb of the right
voice is set to OFF, the left voice’s
reverb type will be in effect.)
NOTE
[EFFECT] in Split Mode
Depending on the conditions, one
effect type will take priority over
the other. The depth will be
decided according to the depth
default value of the voice combination. However, using function
F4 (page 65) you can change the
depth value for each voice as you
like. Effect depth setting via the
panel controls (i.e. pressing the
[–/NO] or [+/YES] buttons while
holding the [EFFECT] button —
will be applied to the right voice
only.
28
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Selecting & Playing Voices
Using the Metronome
The Clavinova features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing.
1 2
[–/NO] [+/YES] buttons
CLP-370
ENGLISH
[TEMPO/FUNCTION ▲▼] buttons
Procedure
1. Start the metronome.
The metronome sound is turned on by pressing
the METRONOME [ON/OFF] button.
The beat indicator flashes
at the current tempo.
Adjusting the tempo
The tempo of the metronome and user song recorder playback (the recorder is
described in the next section) can be set from 32 to 280 beats per minute by
using the [TEMPO/FUNCTION ▼, ▲] buttons (when the [TEMPO/FUNCTION
▼, ▲] button’s [TEMPO] indicator is lit).
Adjusting the time signature
The time signature (beat) of the metronome can be
set by using the [–/NO] and [+/YES] buttons while
holding the METRONOME [ON/OFF] button. You
can set the beat from 0 to 15. The current setting
Beat
appears on the LED display while you are holding
the METRONOME [ON/OFF] button.
A beat setting of “0” plays a low click sound for all beats, while a setting of “1”
plays a high click sound for all beats; other beat settings play a high click for the
first beat in a measure and a low click for all following beats.
NOTE
If the [TEMPO/FUNCTION] button’s [TEMPO] indicator is not lit,
press the [TEMPO/FUNCTION]
button to light the [TEMPO] indicator.
NOTE
The volume of the metronome can
be adjusted via the Metronome
Volume function in Function mode
(page 67).
2. Stop the metronome.
Turn off the metronome by pressing the METRONOME [ON/OFF] button.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
29
Recording Your Performance
ENGLISH
Recording Your Performance
The ability to record and play back what you’ve played on the instrument can be an effective practice aid. You can, for example, record just
the left-hand part, and then practice the right-hand part while playing
back the recorded left-hand part. Or, since you can record up to two
parts separately, you could record the left-and right-hand parts separately, or record both parts of a duet and hear how they sound when
played back. The two-part Song Recorder on the instrument allows the
recording of up to three User songs (U01 – U03) to the instrument.
User songs can be saved to an optional USB storage device.
Recording a performance quickly
This convenient and simple recording method lets you quickly record your performance without
specifying the recording parts — useful, for example, in recording solo piano pieces.
In this way, the performance is automatically recorded to right part.
24 4
3
CLP-370
CAUTION
To avoid erasing previously recorded song(s):
If the song contains data, the part indicator lights up green when you select a song.
Note that recording new data on this part will erase the existing data.
You cannot record the performance to the connected USB storage device directly. The
recorded songs are saved to the instrument automatically. If you want to save data to
the device, perform the Save operation (page 37) after stopping recording.
TERMINOLOGY
Recording vs. Saving:
The format of performance data recorded on a cassette tape differs from that of data recorded on the
Clavinova. A cassette tape records audio signals. The Clavinova “saves” information regarding note
timing, voices, and a tempo value, but not audio signals. When you play back recorded songs, the
Clavinova produces sound based on the saved information. Therefore, recording on the Clavinova
may be more accurately called “saving information.” However, this book often uses the word “recording” because it seems to make more sense.
30
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Recording Your Performance
Procedure
1. Make all the initial settings.
Before you begin to record, select the voice you want to record (or voices if you
will be using Dual or Split mode). Make any other desired settings (reverb,
effect, etc.) as well. You might also want to set the volume.
You can also adjust the playback volume using the [MASTER VOLUME] slider.
2. Engage Record Ready mode.
NOTE
When the instrument is in Demo
Song mode or during a file operation, Record mode cannot be
engaged.
Press the [REC] button to engage Record Ready mode. This automatically selects
an empty song for recording and makes the RIGHT part active. If an empty
song does not exist, Song U01 will be selected. Recording does not actually start
yet.
The SONG [PLAY/PAUSE] indicator will flash at the current METRONOME
tempo setting.
You can turn on the metronome in this step, and adjust the tempo by using the
If you have selected the LEFT
part previously in the same song,
the LEFT part will automatically
be made active when pressing
the [REC] button in step 2.
ENGLISH
NOTE
Recording capacity
You can record up to a maximum
three songs, or up to a maximum
of about 100KB (11,000 Notes) in
each song on the instrument
depending on pedal usage and
other factors.
NOTE
[TEMPO/FUNCTION ▼, ▲] buttons. (Range: 32 – 280)
Record Ready mode can be disengaged before recording by pressing the [REC]
button again.
3. Start recording.
Recording will begin automatically as soon as you play a note on the keyboard
or press the SONG [PLAY/PAUSE] button. The current measure’s number will
appear on the display while recording.
NOTE
If the metronome was on when
you started recording, you’ll be
able to keep time with the metronome while recording, but the
metronome sound will not be
recorded.
NOTE
For more recording information,
see page 34.
NOTE
The left pedal can be assigned to
start recording via the “Left Pedal
Mode” function described on
page 66.
4. Stop recording.
Press either [REC] or SONG [STOP] button to stop recording. When recording is
stopped, dashes appear in the display in succession to indicate that the recorded
data is being saved to the instrument automatically. After the data is saved, the
song name (U01 – U03) appears in the display. The recorded part’s indicator
will glow green to indicate that it now contains data. (Record mode is disengaged automatically.)
NOTE
If the memory becomes full during recording, “FUL” will appear
on the display and recording will
stop automatically. (All recorded
data up to that point will be
retained.)
CAUTION
Do not turn off the power of the instrument when dashes appear in the display in succession. Doing so may delete all song data in the instrument, including external songs
(page 43).
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
31
Recording Your Performance
Playing back a recorded song
Procedure
1. Play back the recorded performance.
Press the SONG [PLAY/PAUSE] button to play back the recorded performance.
ENGLISH
2. Stop the performance.
To stop playback in the middle of a song, press the SONG [STOP] button.
Re-recording a previously recorded song
This section explains how to record again in case your performance
was not satisfactory.
Procedure
1. Select a voice or voices (and other settings) for
recording, if necessary.
Repeat Step 1 on page 31 if you wish to change the previous settings.
For more information of the recorded data see page 34.
2. Re-engage Record Ready mode.
Press the [REC] button, again.
The selected part’s indicator lights in red.
Follow the procedure from Step 3 in “Recording a performance quickly” on
page 31 to re-record.
Deleting a selected part
Pressing the SONG [PLAY/PAUSE] button to start recording, then pressing the SONG
[STOP] button to stop recording will erase all previously recorded data on the selected
part.
32
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
If you want to change the tempo,
reverb type, or effect type when
re-recording a part or when
recording to another part, do so
after you engage Record Ready
mode.
You cannot re-record in the middle of a song.
Recording Your Performance
Recording to RIGHT/LEFT parts
This lets you record the right and left parts separately. Since you can record the left part while playing back the right, this is useful for recording both parts of a duet.
NOTE
Procedure
Part button indications
Off: Contains no data
On (green): Contains data
On (red): Part is enabled for
recording
1. Make all the initial settings.
2. Select a song to record.
Press the [SONG SELECT] button to light “USER” indicator on, then press the
[–/NO][+/YES] buttons to select a song for recording.
Recording capacity
You can record up to a maximum
three songs, or up to a maximum
of about 100KB (11,000 Notes) in
each song on the instrument
depending on pedal usage and
other factors.
ENGLISH
NOTE
Same as step 1 in “Recording a performance quickly” on page 31.
NOTE
CAUTION
To avoid erasing previously recorded song(s):
If the song contains data, the part indicator lights up green when you select a song.
Note that recording new data on this part will erase the existing data.
3. Engage Record Ready mode.
If the metronome was on when
you started recording, you’ll be
able to keep time with the metronome while recording, but the
metronome sound will not be
recorded.
NOTE
Press the [REC] button and press the [RIGHT]/[LEFT] button to engage
Record Ready mode. Recording does not actually start yet.
The SONG [PLAY/PAUSE] indicator will flash at the current METRONOME
tempo setting.
Record Ready mode can be disengaged before recording by pressing the [REC]
button again.
4. Start and stop recording.
Same as step 3 – 4 in “Recording a performance quickly” on page 31.
If you want to change the time
signature, make sure to change it
before entering Record Ready
mode.
If you want to change the tempo,
reverb type, or effect type when
rerecording a part or when
recording to another part, do so
after entering Record Ready
mode.
The Time Signature of a recorded
song cannot be changed. If you
want to record a song with
another Time Signature, first save
a song to USB storage (see page
37), and delete the recorded
both parts of the song (see page
32, Deleting a selected part), then
set the desired time signature,
and begin a new recording.
NOTE
If you don’t want to hear the previously recorded part while you
record (for example, when you
want to record a song different
from what you recorded on the
previous part), press the playback part button before pressing
the [REC] button so that its indicator is turned off.
For more information on recording, see page 34.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
33
Recording Your Performance
ENGLISH
The user song recorder records the following data:
Data in addition to the notes and voices you play is recorded.
This data includes “Individual Parts” and “Entire Song.” See below.
Individual Parts
• Notes played
• Voice selection
• [VARIATION] ON/OFF (CLP-370/340)
• Pedal (Damper/Soft/Sostenuto)
• [REVERB] depth
• [EFFECT] depth
• Dual mode voices
• Dual balance (F3)
• Dual detune (F3)
• Dual octave shift (F3)
• Split mode voices (F4: CLP-370/340)
• Split balance (F4: CLP-370/340)
• Split octave shift (F4: CLP-370/340)
Entire Song
• Tempo
• Time signature (beat)
• [REVERB] type (including OFF)
• [EFFECT] type (including OFF)
34
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Recording Your Performance
Changing the Initial Settings (Data recorded at the
beginning of a song)
The initial settings (data recorded at the beginning of a song) can be changed after the recording.
For example, after recording, you can change the voice to create a different ambience or adjust the
song tempo to your taste.
You can change the following initial settings.
ENGLISH
Individual Parts
• Voice selection
• [VARIATION] ON/OFF (CLP-370/340)
• [REVERB] depth
• [EFFECT] depth
• Dual mode voices
• Split mode voices (CLP-370/340)
• Damper/soft pedal depth
Entire Song
• Tempo
• [REVERB] type (including OFF)
• [EFFECT] type (including OFF)
1. Change the settings via the panel controls.
For example, if you wish to change the recorded voice from [E. PIANO 1] to
[E. PIANO 2], press the [E. PIANO 2] button.
2. Engage Record mode and select a part to change the initial settings.
The indicator glows red. (Data shared by two parts can be changed via either part.)
CAUTION
Be careful not to press the SONG [PLAY/PAUSE] button or a key on the keyboard, either
of which will start recording and erase all previously-recorded data on the selected part.
3. Press the [REC] button to exit Record mode.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
35
Handling Songs with a USB Storage Device
Handling Songs with a USB Storage
Device
You can handle User songs (save, load, and delete) with a USB storage
device. You can also format the device or media.
ENGLISH
Before using a USB device, read the “Precautions when using the USB TO
DEVICE terminal” section on page 41.
NOTE
For details on connecting a USB
storage device, see page 73.
NOTE
Before handling songs with a
USB storage device, make sure
that the device is not protected.
If the device is protected, you
cannot access it.
About Save and Load
Save
You can save three User songs in the instrument to the USB storage device as SMF song
files. These songs can be saved to a “container” (or memory location) in the USB storage device. 100 containers are available — S00 – S99.
Since the User songs are saved in SMF format, they can be played back on other instruments, including other Clavinovas.
Memory location
User song
(Internal memory)
NOTE
If there is not enough capacity left
on the USB storage device to
save or export the data, an appropriate message will appear on the
display and you will not be able to
save or export the data. Delete
unwanted files from the device to
make more memory available
(page 39), or use another device.
USB storage device
NOTE
Save
User Song 1 (U01)
SMF Song 0 (S00)
User Song 2 (U02)
SMF Song 1 (S01)
User Song 3 (U03)
SMF Song 2 (S02)
The file numbers which can be
handled in this instrument are 100
files.
• SMF song numbers: S00 – S99
SMF Song 99 (S99)
Load
If you want to only play the song in the USB storage device, the following operation is
not necessary. For instructions on playing the song, see “Playing Back User Songs from
a USB Storage Device” on page 45. The Load operation can be used if you want to edit
the recorded song on the instrument. Data can be loaded to User Song 3 (U03).
Memory location
User song
(Internal memory)
User Song 1 (U01)
USB storage device
Load
SMF Song 0 (S00)
User Song 2 (U02)
SMF Song 1 (S01)
User Song 3 (U03)
SMF Song 2 (S02)
SMF Song 99 (S99)
36
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
The “S” indication at the top of the
User file name represents “SMF.”
TERMINOLOGY
SMF (Standard MIDI File):
The SMF (Standard MIDI File)
format is one of the most common
and widely compatible sequence
formats used for storing sequence
data. There are two variations:
Format 0 and Format 1.
A large number of MIDI devices
are compatible with SMF Format 0,
and most commercially available
MIDI sequence data is provided in
SMF Format 0. The SMF format for
sequence files allows you to
exchange song data between
different sequencers. User songs
recorded on the Clavinova are
SMF Format 0.
Handling Songs with a USB Storage Device
Saving a Song
1 23
1 2
CLP-370
NOTE
1. Select a User song to save.
Select a User song to save by using the [SONG SELECT] and [–/NO][+/YES] buttons.
2. Select a song container in the device and save the
User song.
If the selected song has no data,
the song will not be saved (you
cannot select a container for SMF
songs — S00 – S99). Confirm that
the selected song has data by
making sure that the indicator of
[RIGHT] or [LEFT] is turned on.
ENGLISH
Procedure
After making sure that the USB storage device is connected to the instrument, press
the [FILE] button (the “SAVE TO USB” indicator lights). Then, while holding the
[FILE] button, simultaneously press the [–/NO][+/YES] buttons to select a container
(S00 – S99). After releasing the [FILE] button, “n y” (no/yes) appears in the display.
Press the [+/YES] button to save the songs. The song is saved into the “USER FILES”
folder and named as “USERSONGxx.MID.”
Overwriting the song
If you select a container which contains an SMF song, three dots appear in the
display (ex., “S.0.0.”). If you do not want to overwrite the file, press the [–/NO]
button when “n y (no or yes)” appears in the display and select another container.
If you want to overwrite the song, press the [+/YES] button. After “n-y” appears in
the display again to confirm whether you wish to overwrite the file or not, press
the [+/YES] button once more.
CAUTION
While the instrument is accessing data (such as during Save, Load, Delete and
Format operations) or is mounting the USB storage device (shortly after the connection:
until the FILE LOAD LED flash stops), do NOT unplug the USB cable, do NOT remove
the media from the device, and do NOT turn the power off to either devices. Doing so
may corrupt the data on either or both devices.
3. Exit from the file operation mode.
Press the [FILE] button several times to exit the file operation mode. (The FILE
indicators turn off.)
Play the recorded song (see page 43).
CAUTION
Do not rename User files on a computer. If the file name is changed in this way, the file
cannot be loaded to the instrument.
NOTE
If you move an SMF song from the
“USER FILES” folder to the top
folder using a computer, the file
type will be changed — from a
SMF song (S00 – S99) to an
External song.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
37
Handling Songs with a USB Storage Device
Loading a Song
13
12
CLP-370
ENGLISH
Procedure
CAUTION
If the User file (U03) on the instrument already contains data, this operation can result in
overwriting of the data. Make sure to save important data to your computer beforehand.
1. Select a song container in the device.
After making sure that the USB storage device is connected to the instrument,
press the [FILE] button (the “LOAD TO USER.” indicator lights). Then, while
holding the [FILE] button, press the [–/NO][+/YES] buttons to select a song
(S00 – S99). Data saved on the instrument can only be loaded back to the
instrument.
2. Load a song to User Song (U03).
“n y” (no/yes) appears in the display. Press the [+/YES] button to load a song.
The file will automatically be loaded into the User Song (U03).
The indication “-” moves from left to right in display, indicating that save operation is in process.
CAUTION
While the instrument is accessing data (such as during Save, Load, Delete and Format
operations) or is mounting the USB storage device (shortly after the connection: until
the LOAD TO USER LED flash stops), do NOT unplug the USB cable, do NOT remove
the media from the device, and do NOT turn the power off to either devices. Doing so
may corrupt the data on either or both devices.
CAUTION
Do not manually change the file name on the USB storage device by using a computer;
doing so will render the file unplayable or unable for loading on the instrument.
CAUTION
Do not turn off the power to the instrument while flashing dashes appear in the display
(indicating the operation is in process). Doing so may damage the data.
When loading is completed, the “End” indication appears in the display, and the
song is loaded into the User Song (U03).
3. Exit from the load operation mode.
Press the [FILE] button to exit the load operation mode. (The “FILE” indicators
turn off.)
38
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Handling Songs with a USB Storage Device
Deleting Song Files
13
12
CLP-370
NOTE
Procedure
1. Select a song file to be deleted.
Press the [FILE] button. (The “DEL/FORMAT” indicator lights.) Then, hold the
[FILE] button, simultaneously press the [–/NO][+/YES] buttons to select a file to
be deleted. Two types of files will be displayed in order:
• Sxx....... SMF songs
• xxx....... External songs (commercially available songs or songs which have
been edited on a computer)
2. Delete the file.
After releasing the [FILE] button, “n y (no or yes)” appears in the display. If you
want to delete the file, press the [+/YES] button. After “n-y” appears in the display again to confirm whether you wish to delete the file or not, press the
[+/YES] button once more.
If you do not want to delete the song, press the [–/NO] button.
CAUTION
While the instrument is accessing data (such as during Save, Delete, Load and
Format operations) or is mounting the USB storage device (shortly after the connection: until the LOAD TO USER LED flash stops), do NOT unplug the USB cable, do NOT
remove the media from the device, and do NOT turn the power off to either devices.
Doing so may corrupt the data on either or both devices.
NOTE
Only files which contain data will
be displayed.
ENGLISH
Audition the song to be deleted
before deleting. Songs cannot be
played back after engaging the
Delete mode.
NOTE
The following types of songs cannot be deleted. If you try to delete
the song, “Pro” (Protected)
appears in the display.
• Protected songs (extension:
Cxx, Exx or SME)
• Disklavier Piano Soft songs
NOTE
For SMF songs (Sxx), the song
numbers are fixed and not
changed by deleting files.
However, the song numbers of
External songs are not fixed and
may be changed by deleting
External songs.
3. Exit from the file operation mode.
Press the [FILE] button to exit the file operation mode. (The FILE indicators
turn off.)
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
39
Handling Songs with a USB Storage Device
Formatting the USB Storage Device
CAUTION
If data is already saved to the USB storage device, be careful not to format it.
If you format the device, all the previously saved data will be deleted.
13
12
ENGLISH
CLP-370
Procedure
1. Engage the format mode.
Press the [FILE] button. (The “DEL/ FORMAT” indicator lights.) Then, while
holding the [FILE] button, simultaneously press the [–/NO] and [+/YES] buttons. When “For” (Format) appears in the display, release the [FILE] button to
display “n y” (no/yes).
2. Execute the format operation.
After “n y” (no/yes) appears in the display, press the [+/YES] button. After “n-y”
appears in the display again to confirm whether you wish to format the device
or not, press the [+/YES] button once more. If you do not want to format the
device, press the [–/NO] button.
CAUTION
While the instrument is accessing data (such as during Save, Delete, Load and Format
operations) or is mounting the USB storage device (shortly after the connection: until
the LOAD TO USER LED flash stops), do NOT unplug the USB cable, do NOT remove
the media from the device, and do NOT turn the power off to either devices. Doing so
may corrupt the data on either or both devices.
3. Exit from the format mode.
Press the [FILE] button to exit the file operation mode. (The FILE indicators
turn off.)
40
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Handling the USB Storage Device (USB Flash Memory/
Floppy Disk, etc.)
NOTE
For more information about the handling of USB devices, refer to the
owner’s manual of the USB device.
Compatible USB devices
USB storage devices (flash memory, floppy disk drive,
hard disk drive, etc.)
The instrument does not necessarily support all commercially available USB devices. Yamaha cannot guarantee
operation of USB devices that you purchase. Before purchasing a USB device for use with this instrument, please
visit the following web page:
http://music.yamaha.com/download/
NOTE
Other USB devices such as a computer keyboard or mouse cannot
be used.
Connecting USB device
When connecting a USB device to the USB [TO DEVICE]
terminal, make sure that the connector on the device is
appropriate and that it is connected in the proper direction.
CAUTION
When connecting a USB device to the USB [TO DEVICE] terminal on the top panel, remove it before closing the key cover. If
the key cover is closed with the USB device connected, the USB
device may be damaged.
Using USB Storage Devices
By connecting the instrument to a USB storage device,
you can save data you’ve created to the connected device,
as well as read data from the connected device.
NOTE
Although CD-R/RW drives can be used to read data to the instrument, they cannot be used for saving data.
The number of USB storage device to be
used
Only one USB storage devices can be connected to the
USB [TO DEVICE] terminal.
Formatting USB storage media
When a USB storage device is connected or media is
inserted, a message may appear prompting you to format
the device/media. If so, execute the Format operation
(page 40).
CAUTION
The format operation overwrites any previously existing data.
Make sure that the media you are formatting does not contain
important data.
To protect your data (write-protect)
To prevent important data from being inadvertently
erased, apply the write-protect provided with each storage device or media. If you are saving data to the USB
storage device, make sure to disable write-protect.
ENGLISH
Precautions when using the USB [TO DEVICE]
terminal
This instrument features a built-in USB [TO DEVICE] terminal. When connecting a USB device to the terminal, be
sure to handle the USB device with care. Follow the
important precautions below.
Connecting/removing USB storage device
Before removing the media from the device, make sure
that the instrument is not accessing data (such as in the
Save, Copy and Delete operations).
CAUTION
Avoid frequently turning the power on/off to the USB storage
device, or connecting/disconnecting the device too often. Doing
so may result in the operation of the instrument “freezing” or
hanging up. While the instrument is accessing data (such as during Save, Copy, Delete, Load and Format operations) or is
mounting the USB storage device (shortly after the connection),
do NOT unplug the USB connector, do NOT remove the media
from the device, and do NOT turn the power off to either device.
Doing so may corrupt the data on either or both devices.
Precautions when using the USB [TO HOST]
terminal
When connecting the computer to the USB [TO HOST]
terminal, make sure to observe the following points.
Failing to do so risks freezing the computer and corrupting
or losing the data. If the computer or the instrument
freezes, restart the application software or the computer
OS, or turn the power to the instrument off then on again.
CAUTION
• Use an AB type USB cable of less than about 3 meters.
• Before connecting the computer to the USB [TO HOST] terminal, exit from any power-saving mode of the computer (such
as suspended, sleep, standby).
• Before turning on the power to the instrument, connect the
computer to the USB [TO HOST] terminal.
• Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/from
the USB [TO HOST] terminal.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing notes on the keyboard or playing back a song.)
• While a USB device is connected to the instrument, you should
wait for six seconds or more between these operations: (1)
when turning the power of the instrument off then on again,
or (2) when alternately connecting/disconnecting the USB
cable.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
41
Handling the Floppy Disk Drive (FDD) and Floppy
Disks
An optional floppy disk drive can be connected to the
USB jack. (CLP-370/340) For instructions on installing
a Yamaha UD-FD01 floppy disk drive, see page 91.
ENGLISH
The floppy disk drive lets you save original data you’ve
created on the instrument to floppy disk, and allows you
to load data from floppy disk to the instrument.
Be sure to handle floppy disks and treat the disk drive
with care. Follow the important precautions below.
Floppy Disk Compatibility
• 3.5” 2DD and 2HD type floppy disks can be used.
Inserting/Removing Floppy Disks
Inserting a Floppy Disk into the Disk Drive:
Hold the disk so that the label of the disk is facing upward
and the sliding shutter is facing forward, towards the disk
slot. Carefully insert the disk into the slot, slowly pushing
it all the way in until it clicks into place and the eject button pops out.
NOTE
Never insert anything but floppy disks into the disk drive. Other
objects may cause damage to the disk drive or floppy disks.
Removing a Floppy Disk
• After checking that the instrument is not accessing*
the floppy disk (checking that the use lamp on the
floppy disk drive is off), firmly press the eject button at
the upper right of the disk slot all the way in.
When the floppy disk is ejected, pull it out of the drive.
If the floppy disk cannot be removed because it is
stuck, do not try to force it, but instead try pressing the
eject button again, or try re-inserting the disk and
attempt to eject it again.
* Access of the disk indicates an active operation, such as
recording, playback, or deletion of data.
If a floppy disk is inserted while the power is on, the disk is
automatically accessed, since the instrument checks
whether the disk has data.
CAUTION
Do not remove the floppy disk or turn off the instrument
itself while the disk is being accessed.
Doing so may result not only in loss of data on the disk
but also damage to the floppy disk drive.
• Be sure to remove the floppy disk from the disk drive
before turning off the power. A floppy disk left in the
drive for extended periods can easily pick up dust and
dirt that can cause data-read and -write errors.
42
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Cleaning the Disk Drive Read/
Write Head
• Clean the read/write head regularly. This instrument
employs a precision magnetic read/write head which,
after an extended period of use, will pick up a layer of
magnetic particles from the disks used that will eventually cause read and write errors.
• To maintain the disk drive in optimum working order
Yamaha recommends that you use a commerciallyavailable dry-type head cleaning disk to clean the head
about once a month. Ask your Yamaha dealer about
the availability of proper head cleaning disks.
About Floppy Disks
Handle floppy disks with care, and follow these
precautions:
• Do not place heavy objects on a disk or bend or apply
pressure to the disk in any way. Always keep floppy
disks in their protective cases when they are not in use.
• Do not expose the disk to direct sunlight, extremely
high or low temperatures, or excessive humidity, dust
or liquids.
• Do not open the sliding shutter and touch the exposed
surface of the floppy disk inside.
• Do not expose the disk to magnetic fields, such as
those produced by televisions, speakers, motors, etc.,
since magnetic fields can partially or completely erase
data on the disk, rendering it unreadable.
• Never use a floppy disk with a deformed shutter or
housing.
• Do not attach anything other than the provided labels
to a floppy disk. Also make sure that labels are attached
in the proper location.
To Protect Your Data (Write-protect Tab):
• To prevent accidental erasure of important data, slide
the disk’s write-protect tab to the “protect” position
(tab open). When saving data, make sure that the disk’s
write-protect tab is set to the “overwrite” position (tab
closed).
Write-protect tab open
(protect position)
Playing Back Songs
Playing Back Songs
You can play back songs recorded using the Record function (pages 30 – 35) or commercially available songs. You can also play the keyboard along with the playback.
Playing the voice demo tune.
• 50 Piano Preset Songs .............................................................................. page 17
50 Piano Preset Songs in the instrument.
• User songs in the instrument .................................................................... page 44
User songs which you recorded to the instrument by using the record function (pages
30 – 35).
• External songs in the instrument .............................................................. page 44
Songs transferred from a computer (including commercially available songs and
songs which have been edited on a computer). Songs can be transferred (saved) to
the instrument by using the Musicsoft Downloader software (refer to the included
“Accessory CD-ROM Installation Guide”). The songs are saved to an area of the
internal memory separate from the area for recorded User songs. Up to 255 songs can
be played back on this instrument (numbers 001 – 255).
• User Songs saved from the instrument in the USB storage device.......... page 45
SMF songs which have been saved from the instrument to a USB storage device (page
37).
• External songs in the USB storage device................................................. page 45
Commercially available songs or songs which have been edited on a computer, etc.
and stored to a USB storage device. Up to 999 songs can be played back on this
instrument (numbers 001 – 999).
• Internet songs from the website (CLP-370/340, CLP-S308/S306) ........... page 46
Connect the instrument to the Internet and play back from the Internet.
NOTE
When playing back songs containing various voices or parts
(such as XG or GM songs), the
voices may not sound correct or
as intended on the original. You
may be able to remedy this and
make the playback sound more
natural or appropriate by changing the Song Channel Selection
setting (page 66) to “1&2,” so that
only channels 1 and 2 will play
back.
NOTE
ENGLISH
• The Demo Songs ....................................................................................... page 16
If the song cannot be selected or
loaded, you may need to change
the Character Code setting (page
70).
NOTE
Song data is not transmitted via
the MIDI connections. However,
channels 3 – 16 of Disklavier
Piano Soft songs and non-protected External songs will be
transmitted via the MIDI connections when the Song Channel
Selection is set to “1&2” (page
66).
NOTE
For the USB storage device,
folder directories on this instrument can be recognized up to
two levels. However, the level is
not displayed and song numbers
001 – 999 are displayed whichever level the song contains.
NOTE
Sequence formats that can be played
• SMF (Standard MIDI File) Formats 0 and 1
The SMF format is one of the most common and widely compatible sequence formats used for storing sequence data. There are two variations: Format 0 and Format
1. A large number of MIDI devices are compatible with SMF Format 0, and most
commercially available MIDI sequence data is provided in SMF Format 0. The SMF
format for sequence files allows you to exchange song data between different
sequencers. User songs recorded in this instrument are saved as SMF Format 0.
If the metronome is being used
during playback, the metronome
will automatically stop when playback is stopped.
NOTE
If the REVERB type is changed
via the panel controls during playback, both the playback and keyboard reverb effects will be
changed.
NOTE
• ESEQ
This sequence format is compatible with many of Yamaha’s MIDI devices, including
the Clavinova series instruments. This is a common format used with various
Yamaha software.
Among ESEQ files, Disklavier Piano Soft songs can be played back on this instrument.
If the EFFECT type is changed via
the panel controls during playback, the playback effect may be
switched off in some cases.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
43
Playing Back Songs
Playing Back User/External Songs on the Instrument
321
1
CLP-370
ENGLISH
Procedure
1. Select the desired song.
Press the [SONG SELECT] button (the USER indicator lights). Then press the
[–/NO] [+/YES] buttons to select a song. The User songs are displayed as “Uxx*”
and External songs in the instrument are displayed as “xxx.”
*The “U” indication in the User song name means “User.” The letters “xx” represent the song number.
2. Start playback.
Press the SONG [PLAY/PAUSE] button.
The current measure number appears on the display during playback.
NOTE
User song playback cannot be
started when the recorder contains
no data.
NOTE
• You can play the keyboard while the Clavinova is playing back a song. You
can also play the notes in a voice different from the playback voice by selecting a voice from the panel.
You can also enjoy playing duets
with yourself by recording one
part of a duet or a song for two
pianos, then playing the other
part while the recorded part plays
back.
Adjust the volume
Use the [MASTER VOLUME] slider to adjust the volume.
Adjust the tempo
You can use the [TEMPO/FUNCTION ▼, ▲] buttons to adjust the playback
tempo as required before or during playback. The default tempo (the song’s
original tempo) is set when you press the [▼] and [▲] buttons simultaneously.
3. Stop playback.
When playback is complete, the Clavinova automatically stops and locates the
top of the song. To stop playback in the middle of a song, press the SONG
[STOP] button. You can also pause playback by pressing the SONG [PLAY/
PAUSE] button.
44
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
If you have External songs in the
instrument, you can use the
repeat function.
ALL: Play all External songs in
sequence.
rnd: Play all External songs continuously in random order.
NOTE
For instructions about how to load
the songs from the computer
(refer on page 76).
Playing Back Songs
Playing Back User Songs from a USB Storage Device
21
1
CLP-370
Procedure
ENGLISH
1. Select the desired song in the USB storage device.
After making sure that the device is connected to the instrument, press the
[SONG SELECT] button (the USB indicator lights). Then press the [–/NO] [+/
YES] buttons to select a number of the song you want to play (the number will
appear on the LED display “Sxx*” or “xxx*”), or select the playing method
RND* or ALL*.
*The “S” indication in the display represents “SMF” songs. The letters “xx” represent the song number.
*The “xxx” indication in the display represents External songs.
RND (r n d)*: Play all preset songs continuously in random order.
ALL*: Play all preset songs in sequence.
2. Start and stop playback.
Same as steps 2 and 3 in “Playing Back User/External Songs on the Instrument”
on page 44.
Useful Playback Functions
Turning part playback on and off
When you select a song on the Clavinova, the indicators for parts that contain data
(one of [RIGHT] [LEFT] or both) are lit in green. While the Clavinova is playing or
stopped, pressing these part buttons turns off the indicators, and the data on those
parts is not played. Pressing the part buttons toggles part playback on and off.
Starting playback automatically when you start playing the keyboard
(Sync Start)
You can start playback as soon as you start playing the keyboard. This is called the
“Sync Start” function.
To engage the Sync Start function, press the SONG [PLAY/PAUSE] button while holding down the SONG [STOP] button. The SONG [PLAY/PAUSE] lamp will flash at the
current tempo.
(Repeat the previous operation to disengage the Sync Start function.)
Playback will then start as soon as you begin playing on the keyboard.
This function is useful when you wish to match the timing of the beginning of the playback sound and the start of your own performance.
NOTE
Parts can be turned on or off
before or during playback.
TERMINOLOGY
Sync:
Synchronized; occurring at the
same time
Assigning the PLAY/PAUSE function to the left pedal
The left pedal can also be assigned to song play/pause operation via the “Left Pedal
Mode” (page 66). This is convenient for starting playback of the song anytime after you
have started playing.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
45
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Internet Direct Connection (CLP-370/
340, CLP-S308/S306)
This feature lets you directly connect your instrument to the Internet. A service in the special Yamaha website enables you
to play back a range of songs (song data) in various musical genres as background music.
Here in this section, you may come across some unfamiliar terms and phrases related to computers and online communications. To look up the meaning of these terms, refer to the “Glossary of Internet Terms” on page 57.
ENGLISH
Setting up the Instrument for Internet Connection
You can connect the instrument to a full-time online connection (ADSL, optical fiber,
cable Internet, etc.) via a router or a modem equipped with a router. For the latest services and the specific instructions on connecting (as well as information on compatible
devices etc.), refer to the Yamaha website:
http://music.yamaha.com/idc/
Use a computer to connect to the Internet and get online before connecting the instrument,
since no modem or router settings can be made from the instrument itself.
To use the Internet connection, you will first need to subscribe to an Internet service or
provider.
Connection example 1: Connecting by cable (using a modem without router)
Modem*
No router capability
Router
Cable type
LAN cable
[LAN] port
* Here, “modem” refers to an ADSL modem, optical network unit (ONU) or cable modem.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
Connect the LAN cable to the
[LAN] port.
NOTE
Some types of modems require
an optional Ethernet hub network
for simultaneously connecting to
several devices (such as computer, musical instrument, etc.).
NOTE
LAN cable
46
NOTE
Depending on the Internet connection, you may not be able to
connect to two or more devices
(for example, a computer and the
instrument), depending on the
contract with the provider. This
means you cannot connect with
the instrument. If in doubt, check
your contract or contact your provider.
Due to EU regulations, users
within Europe should use an STP
(shielded twisted pair) cable to
prevent electromagnetic interference.
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Connection example 2: Connecting by cable (using a modem with
router)
NOTE
Modem*
Router capability
LAN cable
Connect the LAN cable to the
[LAN] port.
LAN cable
[LAN] port
ENGLISH
* Here, “modem” refers to an ADSL modem, optical network unit (ONU) or cable modem.
Connection example 3: Wireless connection (using a wireless game
adaptor)
NOTE
Modem*
Connect the wireless game adaptor to the [LAN] port.
Access point
NOTE
In addition to the modem or an
access point, this connection
requires a router.
[LAN] port
Wireless Game Adaptor
* Here, “modem” refers to an ADSL modem, optical network unit (ONU) or cable modem.
Connection example 4: Wireless connection (using a USB wireless
LAN adaptor)
NOTE
Modem*
Connect the USB wireless LAN
adaptor to the USB [TO DEVICE]
terminal.
Access point
NOTE
In addition to the modem or an
access point, this connection
requires a router.
USB Wireless LAN Adaptor
USB [TO DEVICE] terminal
NOTE
* Here, “modem” refers to an ADSL modem, optical network unit (ONU) or cable modem.
This instrument is encrypted in
WEP format only.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
47
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Connecting the Instrument to the Internet
If you are using a connection by cable (using DHCP):
ENGLISH
You do not need to make settings on the instrument. You can access the Internet simply
by connecting a router or a modem equipped with a router to the instrument via a LAN
cable.
Once the instrument is successfully connected to the Internet, currently selected channel
will be shown on the display when you select the “INTERNET” lamp with the [SONG
SELECT] button.
You can play back the songs on the Internet using the service. For instructions on playing
back songs, see “Listening to the Songs on Internet” on page 56.
If you are using a connection by cable (using static IP
address, proxy server):
You need to make Internet settings on the instrument.
For instructions on making Internet settings, see “About the Internet Settings” on page 49.
If you are using a wireless LAN (using a wireless
game adaptor):
You do not need to make settings on the instrument.
You can access the Internet simply by connecting a wireless game adaptor to the instrument.
* The wireless game adaptor requires settings such as the access point. For information about how to make
settings, read the owner’s manual for the product you are using.
Once the instrument is successfully connected to the Internet, currently selected channel
will be shown on the display when you select the “INTERNET” lamp with the [SONG
SELECT] button.
You can play back the songs on the Internet using the service. For instructions on playing
back songs, see “Listening to the Songs on Internet” on page 56.
If you are using a wireless LAN (using a USB wireless
LAN adaptor):
You need to make Internet settings from a computer; settings cannot be made on the
instrument.
For instructions on making Internet settings, see “About the Internet Settings” on page 49.
48
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
The most common routers and
modems equipped with a router
have a DHCP function.
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
About the Internet Settings
You can conveniently make Internet settings for your instrument from the special
Yamaha website.
If you select a wireless connection using the USB wireless LAN adaptor or a connection
by cable (using static IP address or proxy server), you need to make Internet settings
explained as follows.
NOTE
You do not need to make the
Internet settings here if you are
using a connection by cable
(using DHCP) or a wireless LAN
(using a wireless game adaptor).
Internet Settings
Access the
special Yamaha
website
ENGLISH
When you use the Internet Direct Connection (IDC) for the first time, you should
make the Internet settings according to the following illustration flow.
This flow is shown to make you easily understand how to load the setting file created by
the computer to your instrument. By following this flow, you won’t need to make
difficult settings such as typing various data on your instrument.
USB Flash
Memory
Save the file
Create the Internet to USB flash
memory
setting file
Load the file to
the instrument
For details, refer to the Yamaha webpage:
http://music.yamaha.com/idc/
Creating the Internet Setting Files
You need to create the Internet setting files on the special Yamaha webpage using your
computer before making the Internet settings.
For information about how to create the Internet setting files, read the instructions on
the Yamaha webpage:
http://music.yamaha.com/idc/
NOTE
The Internet settings will be
backed up.
Loading the Internet Setting Files
This procedure lets you make Internet settings by loading the Internet setting files
created on the special Yamaha webpage to the instrument.
5
1
24
3 5
CLP-370
NOTE
Procedure
You can create the Internet
setting files (named “config.n21”)
on the special Yamaha webpage.
1. Engage the Function mode.
Make sure that the USB flash memory device containing the saved Internet
setting file named “config.n21” is connected to the instrument, and then press
the [TEMPO/FUNCTION] button so that the [FUNCTION] indicator lights.
NOTE
The Load mode cannot be
engaged while voice demo song
playback is in use, when the
[REC] button is on, or when user
song playback is active.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
49
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
2. Select Function F9.y (on the CLP-370/340) or F8.y
(on the CLP-S308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.y (CLP-370/
340) or F8.y (CLP-S308/S306).
3. Enter the Sub-modes Selection mode following the
F9 or F8.
Press the [+/YES] button to enter the Sub-modes Selection mode.
ENGLISH
4. Select Function F9.1 (on the CLP-370/340) or F8.1
(on the CLP-S308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.1 (CLP-370/
340) or F8.1 (CLP-S308/S306).
If you do not want to load the file, press the [–/NO] button.
5. Start loading.
Press the [+/YES] button.
After “n-y” appears in the display again to confirm whether you wish to load the
file or not, press the [+/YES] button once more.
If you do not want to load the file, press the [–/NO] button.
When loading from the USB flash memory device is
completed, an “End” message will appear on the display. Press [–/NO] or [+/YES] button to exit from this
display.
Once loading is completed, you are now ready to access the Internet.
Once the instrument is successfully connected to the Internet, currently selected
channel will be shown on the display when you select “INTERNET” lamp with
the [SONG SELECT] button.
For instructions on listening to the songs, see “Listening to the Songs on Internet” on page 56.
50
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
If loading is not successfully completed, an “Err” message and the
error code will appear alternately
on the display.
To return to the previous indication, press the [–/NO] or
[+/YES] button.
NOTE
Error Code
You can check the description for
the error code on the Yamaha
website:
http://music.yamaha.com/idc/
NOTE
Yamaha recommends that you
back up the Internet setting files
(page 78).
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Checking the field strength (when using a USB wireless
LAN adaptor)
You can check the field strength on the display, if you are using a USB wireless LAN
adaptor (Connection example 4 on page 47).
Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
NOTE
The field strength can be displayed after making the Internet
connection.
NOTE
Procedure
1. Select Function F9.3 (on the CLP-370/340) or F8.3
ENGLISH
If you are using a wireless game
adaptor, the display pattern for
“No wireless LAN is used” will
appear.
(on the CLP-S308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.3 (CLP-370/
340) or F8.3 (CLP-S308/S306).
2. Press the [–/NO] or [+/YES] button
The field strength indication will appear on the display for about three seconds.
Field Strength Indications
Radio Status
Display
No signal is present.
Field strength: Weak
Field strength: Medium
Field strength: Strong
No wireless LAN is used.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
51
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Exporting the Connection Information
This procedure lets you export the detailed information on the current connection as a
text file to a USB flash memory device. You can check the information on your computer.
Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
NOTE
The connection information file
does not allow you to manually
make Internet settings. The connection information file is set to
“read only” and cannot be edited.
ENGLISH
Procedure
1. Select Function F9.2 (on the CLP-370/340) or F8.2
(on the CLP-S308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.2 (CLP-370/
340) or F8.2 (CLP-S308/S306).
2. Turn on the Export mode.
Press the [+/YES] buttons so that “OUt” appears on the display.
If you do not want to export the file, press the [–/NO]
button.
NOTE
The export mode cannot be
engaged while voice demo song
playback is in use, when the
[REC] button is on, or when user
song playback is active.
NOTE
If exporting has not successfully
been completed, an “Err” message and the error code will
appear alternately on the display.
NOTE
3. Start exporting.
Press the [+/YES] button.
A “n y” appears in the display to confirm whether you wish to export the file or
not, press the [+/YES] button again.
If you do not want to export the file, press the [–/NO] button.
A “n–y” message will appear on the display if a USB flash memory device contains a file with the same name as the one you are attempting to export.
Press the [+/YES] button to execute the overwriting operation. Press the [–/NO]
button to cancel exporting.
When exporting to the USB flash memory device is
completed, an “End” message will appear on the display. Press [–/NO] or [+/YES] button to exit from this
display.
After exporting, connect the USB flash memory device to your computer, and
then open the text file named “ConnectionInfo.txt” in the root directory of the
USB flash memory device to check the detailed connection information.
52
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Error Code
You can check the description for
the error code on the Yamaha
website:
http://music.yamaha.com/idc/
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Other Internet Operations
Checking the version number of the instrument
You can check the version number of this instrument.
Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
1. Select Function [F9.4] (on the CLP-370/340) or F8.4 (on the CLPS308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.4 (CLP370/340) or F8.4 (CLP-S308/S306).
2. Call up the version number.
Press the [+/YES] button so that the version number appears on the display.
A “PrG” message and version number “x.xx” will appear alternately on the
display.
ENGLISH
Procedure
3. Return to the Sub-modes Selection mode
Press the [+/YES] button to exit from the sub-modes.
4. Exit from the Function mode
Press the [TEMPO/FUNCTION] button to exit from function modes.
Checking the version number of the LAN Port driver
You can check the version number of the LAN Port driver.
Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
Procedure
1. Select Function F9.5 (on the CLP-370/340) or F8.5 (on the CLPS308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.5 (CLP370/340) or F8.5 (CLP-S308/S306).
2. Call up the version number.
Press the [+/YES] button so that the version number appears on the display.
A “L-P” message and version number “x.x.x” will appear alternately on the
display.
3. Return to the Sub-modes Selection mode
Press the [+/YES] button to exit from the Sub-modes.
4. Exit from function mode
Press the [TEMPO/FUNCTION] button to exit from the Function modes.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
53
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Checking the version number of the USB-LAN
Adapter driver
You can check the version number of the USB-LAN Adapter driver.
Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
ENGLISH
Procedure
1. Select Function F9.6 (on the CLP-370/340) or F8.6 (on the CLPS308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.6 (CLP370/340) or F8.6 (CLP-S308/S306).
2. Call up the version number.
Press the [+/YES] button so that the version number appears on the display.
A “L-A” message and version number “x.x.x” will appear alternately on the
display.
3. Return to the Sub-modes Selection mode
Press the [+/YES] button to exit from the Sub-modes.
4. Exit from function mode
Press the [TEMPO/FUNCTION] button to exit from the Function modes.
54
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
Initializing Internet Settings
You can initialize the Internet settings.
Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
NOTE
1. Select Function F9.7 (on the CLP-370/340) or F8.7 (on the CLPS308/S306).
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.7 (CLP370/340) or F8.7 (CLP-S308/S306).
The settings of the Internet are not
initialized when using the “Initializing the data” on page 58.
ENGLISH
Procedure
2. Enter the Initializing mode.
Press the [+/YES] buttons.
A “CLr” message will appear on the display.
3. Confirm the initialization.
Press the [+/YES] button.
A “n y” appears in the display to confirm whether you wish to initialize or
not.
If you do not want to initialize, press the [–/NO] button.
4. Execute the initialization.
Press again the [+/YES] buttons.
Start the initialization.
When initialization is completed, an “End” message appears on the display.
NOTE
Information of the cookies will be
initialized at the same time.
5. Return to the Sub-modes Selection mode
Press the [+/YES] button to exit from the Sub-modes.
6. Exit from function mode
Press the [TEMPO/FUNCTION] button to exit from the Function modes.
CAUTION
Initializing restores the instrument to the factory-programmed settings for all Internet
settings. Yamaha recommends you that you back up the Internet settings before initializing.
Internet Initial Settings List
The following are the default settings of this instrument.
DHCP
ON (available)
Wireless LAN
OFF (no settings)
Proxy server
OFF (no settings)
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
55
Listening to the Songs on Internet (CLP-370/340, CLP-S308/S306)
Listening to the Songs on Internet (CLP370/340, CLP-S308/S306)
Yamaha provides a special website with data service that enables you to play back a range of songs (song data) in various
musical genres as background music on your instrument.
Before connect the instrument to the Internet, be sure to read “Internet Direct Connection” on page 46.
ENGLISH
43
1
2
CLP-370
Procedure
1. Turn on the “INTERNET” lamp.
Make sure that the instrument is connected to the Internet, then press the
[SONG SELECT] button (the INTERNET indicator lights). The “INTERNET”
access lamp flashes in red during Internet access.
2. Change the Channel.
Press the [–/NO] or [+/YES] button to change the channel. The current channel
setting appears on the display.
NOTE
You cannot select the “INTERNET” lamp while voice demo
song playback is in use or the
[REC] button is on.
NOTE
The LED displays shown in this
owner’s manual are for instructional purposes only and may
appear somewhat different from
those on your instrument.
NOTE
3. Start playback.
Press the SONG [PLAY/PAUSE] button to start playback (the “INTERNET”
access lamp flashes in red during Internet access).
4. Stop playback.
Press the SONG [STOP] button.
You can adjust the Effect Type
(page 23) that is applied to the
voice you play on the keyboard
as well as for the song on Internet
playback. The Touch sensitivity
(page 24) for the keyboard voice
can also be adjusted to your liking. You can also change the Brilliance type (page 22) and Reverb
type (page 22) that are applied to
Internet song playback.
NOTE
When you select a different song
(or a different song is selected
during chained playback), an
appropriate Reverb Type will be
selected accordingly.
NOTE
Song data from the Internet is not
transmitted via the MIDI connectors.
NOTE
The Synchro start function, Part
settings and A-B Repeat function
becomes effective after you play
back the song once.
56
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Listening to the Songs on Internet (CLP-370/340, CLP-S308/S306)
Access point
A device that acts as a communication hub for multiple wireless devices, and conventionally enables both
wired and wireless LAN connections.
Broadband
An Internet connection technology/service (such as ADSL and optical fiber) that allows for high-speed, highvolume data communication.
Browser
The software used to search for, access, and view web pages. For this instrument, this refers to the display
that shows the contents of the web pages.
Cookie
A system that records certain information that the user transfers when visiting a website and using the Internet. The function is similar to a preference file in a conventional computer program, in that it “remembers” certain information such as your user name and password, so you don’t have to re-enter the information each
time you visit the site.
DHCP
This is a standard or protocol by which IP addresses and other low-level network configuration information
can be dynamically and automatically assigned each time connection is made to the Internet.
Download
Transferring data over a network, from a larger “host” system to a smaller “client” system’s hard drive or other
local storage device—much like copying files from your hard disk drive to a floppy disk. For this instrument,
this refers to the process of transferring Song and other data from a website to the instrument.
Home page
The first page shown when opening a browser and connecting to the Internet. This phrase is also used to
mean the “front screen” or top page of a website.
Internet
A huge network made up of networks, the Internet allows high-speed data transfer among computers, mobile
phones and other devices.
IP address
A string of numbers assigned to each computer connected to a network, and indicating the device’s location
on the network.
LAN
Short for Local Area Network, this is a data-transfer network that connects a group of computers at a single
location (such as an office or home) by means of a special cable.
Link
Location information in other sentences and images, etc. that are under buttons and character strings on a
web page. When the place with the link is clicked, the page selection jumps to the relevant link.
Modem
A device which connects and allows data transfer between a conventional telephone line and a computer. It
converts the digital signals from the computer to analog audio for sending over the phone line, and vice versa.
Provider
A communications business that offers Internet connection services. In order to connect to the Internet, it is
necessary to contract to a provider.
Proxy
A proxy server is a server that all computers on a local network have to go through before accessing information on the Internet. It intercepts all or designated requests to the real server to see if it can fulfill the requests
itself. If not, it forwards the request to the real server. Proxy servers are used to improve performance and
speed, and to filter requests, usually for security and to prevent unauthorized access to an internal network.
Router
A device for connecting multiple computer networks. For example, a router is necessary when connecting
several computers in a house or office, and allow them to all access the Internet and share data. A router is
usually connected between a modem and a computer, although some modems have a built-in router.
Server
A hardware system or computer used as a central point for a network, providing access to files and services.
Site
Short for “website,” this refers to the group of web pages that are opened together. For example, the collection
of web pages whose addresses begin with “http://www.yamaha.com/” is referred to as the Yamaha site.
SSL
Short for Secure Sockets Layer, a standard for transmitting confidential data such as credit card numbers over
the Internet.
URL
Short for Uniform Resource Locator, a string of characters used to identify and link to specific websites and
pages on the Internet. A complete URL usually starts with the characters “http://.”
Web page
Refers to each individual page that makes up a website.
WEP
Short for Wired Equivalent Privacy, a security protocol for wireless networks. WEP protects communication
contents from being intercepted.
Wireless LAN
A LAN connection that allows data transfer through a wireless, cable-free connection.
Wireless Game
Adaptor (Wireless
Ethernet Converter
or Bridge)
Device that allows easy wireless connection with digital consumer electronic devices, printers, and game
machines, etc. equipped with [LAN] ports.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
ENGLISH
Glossary of Internet Terms
57
Listening to the Songs on Internet (CLP-370/340, CLP-S308/S306)
Initializing the data
CAUTION
When you initialize the data, all panel settings and song data will be erased and reset to
the default settings. Yamaha recommends you that you back up the data before initializing (refer on page 78).
ENGLISH
Turn off the power to the instrument. Then turn the power on
while holding the C7 key (highest key).
58
CAUTION
Do not turn off the power to this instrument while data in internal memory is being initialized (in other words, while the “CLr” indication is shown). Doing so may corrupt the
all data on the instrument.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Detailed Settings — [FUNCTION]
Detailed Settings — [FUNCTION]
You can set various parameters to make the best use of Clavinova functions, such as fine tuning the pitch or selecting a
scale, etc.
The following parameters are available.
The CLP-370/340 has nine main functions, and the CLP-330 has seven main functions, and the CLP-S308/S306 has eight
main functions.
Some of these main functions consist of a set of sub-modes.
Function
Sub-Mode
CLP-370/
340
CLP-330
CLP-S308/
S306
Reference
page
F1
F1
F1
62
Fine tuning of the pitch
—
Selecting a scale
Scale
F2.1
F2.1
F2.1
63
Base Note
F2.2
F2.2
F2.2
63
Dual Balance
F3.1
F3.1
F3.1
64
Dual Detune
F3.2
F3.2
F3.2
64
Voice 1 Octave Shift
F3.3
F3.3
F3.3
64
Voice 2 Octave Shift
F3.4
F3.4
F3.4
64
Voice 1 Effect Depth
F3.5
F3.5
F3.5
64
Voice 2 Effect Depth
F3.6
F3.6
F3.6
64
Reset
F3.7
F3.7
F3.7
64
Split Point
F4.1
—
—
65
Split Balance
F4.2
—
—
65
Right Voice Octave Shift
F4.3
—
—
65
Left Voice Octave Shift
F4.4
—
—
65
Right Voice Effect Depth
F4.5
—
—
65
Left Voice Effect Depth
F4.6
—
—
65
Damper Pedal Range
F4.7
—
—
65
Dual mode functions
Split mode functions
Other Functions
Reset
F4.8
—
—
65
Left Pedal Mode
F5.1
F4.1
F4.1
66
Soft Pedal Effect Depth
F5.2
F4.2
F4.2
66
Sustain Sample Depth
F5.3
—
—
66
Keyoff Sample Volume
F5.4
—
—
66
Song Channel Selection
F5.5
F4.3
F4.3
66
F6
F5
F5
67
Metronome volume
—
MIDI Functions
MIDI Transmit Channel Selection
F7.1
F6.1
F6.1
67
MIDI Receive Channel Selection
F7.2
F6.2
F6.2
68
Local Control ON/OFF
F7.3
F6.3
F6.3
68
Program Change ON/OFF
F7.4
F6.4
F6.4
68
Control Change ON/OFF
F7.5
F6.5
F6.5
68
Panel/Status Transmit
F7.6
F6.6
F6.6
69
Initial Setup Send
F7.7
F6.7
F6.7
69
Voice
F8.1
F7.1
F7.1
70
MIDI
F8.2
F7.2
F7.2
70
Tuning
F8.3
F7.3
F7.3
70
Others
F8.4
F7.4
F7.4
70
—
F8.5
F7.5
F7.5
70
Backup Functions
Character Code
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
ENGLISH
Parameter List
59
Detailed Settings — [FUNCTION]
CLP-370/
340
CLP-330
CLP-S308/
S306
Reference
page
Loading Internet Setting File
F9.1
—
F8.1
49
Exporting The Connection Information
F9.2
—
F8.2
52
Checking the Field Strength
F9.3
—
F8.3
51
Program Version
Program Version
F9.4
—
F8.4
53
LAN Functions
LAN port driver version
F9.5
—
F8.5
53
USB-LAN Adapter version
F9.6
—
F8.6
54
Initializing Internet Settings
F9.7
—
F8.7
55
Function
ENGLISH
LAN Settings
Sub-Mode
Basic Procedure in Function Mode
Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
1 5
2 4
34
CLP-370
Procedure
1. Engage the Function mode.
Press the [TEMPO/FUNCTION] button so that its [FUNCTION] indicator lights.
will appear on the display. (The indication of “
the status of the unit and usage.)
” varies depending on
2. Select a function.
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select the desired function from
F1 – F9 (CLP-370/340), F1 – F7 (CLP-330), F1 – F8 (CLP-S308/S306).
NOTE
Functions cannot be selected
during Demo/Song Select/ file
operation mode or when the user
song recorder is in operation.
NOTE
To exit the Function mode, press
[FUNCTION] button any time.
3. Use the [–/NO] [+/YES] buttons.
If the function does not include sub-modes, jump to Step 4.
If the function includes sub-modes, press the [+/YES] button once to enter the
respective sub-mode.
60
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
After you select the function, the
current setting will be displayed
when the [–/NO] or [+/YES] button is pressed for the first time.
Detailed Settings — [FUNCTION]
4. Operate the desired function using the following
two buttons.
[TEMPO/FUNCTION ▼, ▲]
Operation Example 1 (F1. Fine tuning of the pitch)
LED indication
Engage the Function mode.
Select a desired function.
LED indication
ENGLISH
Selects the desired function/sub-mode.
[–/NO] or [+/YES]
After you select the desired function or sub-mode, set the ON/OFF, select the
type, or change the value, accordingly.
Depending on the setting, the default setting (which is used when you first turn
on the power to the Clavinova) is recalled by pressing the [–/NO] and [+/YES]
buttons simultaneously.
Change the value.
Operation Example 2 (F3.1 “Dual Balance”)
LED indication
Engage the Function mode.
Select a desired function.
LED indication
Engage the respective
sub-mode.
Select a desired sub-mode.
LED indication
Change the value.
5. After using the function, exit the function mode.
To exit the Function mode, press the [TEMPO/FUNCTION] button so that its
[TEMPO] indicator lights.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
61
Detailed Settings – [FUNCTION]
About Each Function
NOTE
F1. Fine Tuning of the Pitch
You can fine tune the pitch of the entire instrument.
This function is useful when you play the Clavinova
along with other instruments or CD music.
1. Engage the Function mode and select
.
ENGLISH
2. Use the [–/NO] and [+/YES] buttons to lower or
raise the pitch of the A3 key in approximately
0.2 Hz increments.
You can also tune in about 1Hz steps (in any mode other
than Function mode).
To tune down or up, respectively, in approximately 1 Hz
increments: Hold the A -1, B -1 and C0 keys (three white keys at
the left end) or A -1, B -1 and C#0 keys (two white keys and a
black key) simultaneously and press the [–/NO] or [+/YES] button.
To restore standard pitch: Hold the A -1, B -1 and C0 keys
(three white keys at the left end) or A -1, B -1 and C#0 keys (two
white keys and a black key) simultaneously and press the [–/NO]
[+/YES] buttons simultaneously.
C#0
A#-1
The value appears two-digit number and one decimal
place.
Ex. 440.2Hz is shown as 40.2 on the display.
C0
Display
Value
440.0
Setting range:
440.2
427.0 – 453.0 (Hz)
440.4
Normal setting:
440.6
440.0 (Hz)
440.8
TERMINOLOGY
Hz (Hertz):
This unit of measurement refers to the frequency of a sound and
represents the number of times a sound wave vibrates in a second.
NOTE
You can also use the keyboard to set the pitch (in any mode
other than Function mode).
To tune up (in about 0.2Hz steps): Hold the A -1, B -1 and C0
keys (three white keys at the left end) simultaneously and press
any key between C3 and B3.
To tune down (in about 0.2Hz steps): Hold the A -1, B -1 and
C#0 keys (two white keys and a black key) simultaneously and
press any key between C3 and B3.
To restore standard pitch: Hold the A -1,B -1, C0 and C#0
(three white keys and a black key) simultaneously and press any
key between C3 and B3.
Each key has a note name; for example, the lowest (farthest left)
key on the keyboard corresponds to A -1, and the highest
(farthest right) key to C7.
During the procedure described above, the display indicates a
value in Hz <
…
>. After the procedure, the display
returns to the previous indication.
62
C3
B3
B -1
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
A -1
During the procedure described above, the display indicates a
value in Hz <
…
>. After the procedure, the display
returns to the previous indication.
Detailed Settings – [FUNCTION]
You can select various scales.
Equal Temperament is the most common
contemporary piano tuning scale. However,
history has known numerous other scales,
many of which serve as the basis for certain
genres of music. You can experience these
tunings with
the Clavinova.
Equal Temperament
1. Engage the Function mode and select
2. Press the [+/YES] button to engage the scale
function’s sub-mode, then use the [TEMPO/
FUNCTION ▼, ▲] buttons to select the
desired sub-mode.
Press the [–/NO] and [+/YES] buttons to select
the number of the desired tuning.
Sub-mode
F2.1: Scale
Setting range:
One octave is divided into twelve equal intervals.
Currently the most popular piano tuning scale.
Pure Major/Pure Minor
Based on natural overtones, three major chords using
these scales produce a beautiful, pure sound.
Pythagorean
This scale, designed by Pythagoras, a Greek philosopher,
is based on the interval of a perfect 5th.
The 3rd produces swells, but the 4th and 5th are beautiful and suitable for some leads.
Mean Tone
This scale is an improvement of the Pythagorean in that
the swell of the 3rd has been eliminated. The scale
became popular during the late 16th century through the
late 18th century, and was used by Handel.
Werckmeister/Kirnberger
These scales combine Mean Tone and Pythagorean in
different ways. With these scales, modulation changes the
impression and feel of the songs. They were often used in
the era of Bach and Beethoven. They are often used today
to reproduce the music of that era on harpsichords.
.
1: Equal Temperament
2: Pure Major
3: Pure Minor
4: Pythagorean
5: Mean Tone
6: Werckmeister
7: Kirnberger
ENGLISH
F2. Selecting a Scale
Normal setting: 1: Equal Temperament
F2.2: Base Note
If you select a scale other than Equal Temperament, you
need to specify the root. (You can specify the root note
with Equal Temperament selected, but it is not effective.
The base note setting is effective for tunings other than
the Equal Temperament tuning.)
Setting range:
Normal setting:
• Root indication example
(F)
(G)
followed by
a high bar if sharp
(A )
followed by
a low bar if flat
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
63
Detailed Settings – [FUNCTION]
F3. Dual Mode Functions
You can set various parameters for Dual mode
to optimize the settings for the songs you play,
such as adjusting the volume balance between
two voices.
Dual mode function settings are set individually for each voice combination.
ENGLISH
1. Select the voices in Dual mode, then engage
the Function mode and select
.
2. Press the [+/YES] button to engage the Dual
mode function’s sub-mode, then use the
[TEMPO/FUNCTION ▼, ▲] buttons to select
the desired sub-mode. Press the [–/NO] [+/
YES] button to assign values.
NOTE
If Dual mode is not engaged,
will appear instead of
and you will be unable to select Dual mode functions.
In this case, you can switch to the Dual mode by selecting two
voices.
F3.1: Dual Balance
Setting range: –1, 0, 1
Normal setting: Different for each voice combination.
You can shift the pitch up and down in octave steps for
Voice 1 and Voice 2 independently. Depending on which
voices you combine in Dual mode, the combination may
sound better if one of the voices is shifted up or down an
octave.
F3.5: Voice 1 Effect Depth
F3.6: Voice 2 Effect Depth
Setting range: 0 – 20
Normal setting: Different for each voice combination.
These functions make it possible to individually set the
depth of the effect for Voices 1 and 2 for Dual mode.
(The effect depth settings cannot be changed unless the
[EFFECT] is ON. Function mode must be exited before
the [EFFECT] can be turned ON.)
F3.7: Reset
Setting range:
0 – 20 (A setting of “10” produces an
equal balance between the two Dual
mode voices. Settings below “10”
increase the volume of Voice 2 in
relation to Voice 1, and settings
above “10” increase the volume of
Voice 1 in relation to Voice 2.)
Normal setting: Different for each voice combination.
You can set one voice as the main voice, and another
voice as a softer, mixed voice.
F3.2: Dual Detune
-20 – 0 – 20 (With positive values,
the pitch of Voice 1 is raised and the
pitch of Voice 2 is lowered. With negative values, the pitch of Voice 1 is
lowered and the pitch of Voice 2 is
raised.)
NOTE
The available setting range is wider in the lower range (± 60 cents
for A -1), and narrower in the higher range (± 5 cents for C7). (100
cents equal one semitone.)
Normal setting: Different for each voice combination.
Detune Voice 1 and Voice 2 for Dual mode to create a
thicker sound.
64
F3.4: Voice 2 Octave Shift
• “Voice 1” and “Voice 2” are explained on page 26.
Sub-mode
Setting range:
F3.3: Voice 1 Octave Shift
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
This function resets all Dual mode functions to their
default values. Press the [+/YES] button to reset the values.
NOTE
SHORTCUT:
You can jump directly to the Dual mode functions
by pressing
the [TEMPO/FUNCTION] button while holding the two Dual mode
voice buttons.
To exit Function mode, you still need to press the [TEMPO/FUNCTION]
button so that the TEMPO indicator lights up.
Detailed Settings – [FUNCTION]
This menu enables you to make various
detailed settings for Split mode.
By changing the split point or other setting,
you can optimize the settings for the songs
you play.
1. Select the voices in Split mode, then engage
the Function mode and select
.
2. Press the [+/YES] button to engage the Split
mode function’s sub-mode, then use the
[TEMPO/FUNCTION ▼, ▲] buttons to select
the desired sub-mode. Press the [–/NO] [+/
YES] button to assign values.
NOTE
If Split mode is not engaged,
will appear instead of
and you will be unable to select Split mode functions. Also note
that you must exit Function mode before you can engage Split
mode.
Sub-mode
F4.1: Split Point
Setting range: The entire keyboard
Normal setting: F 2
Set the point on the keyboard that separates the right and
left-hand sections (split point). The pressed key is
included in the left-hand range.
• Instead of pressing the [–/NO] [+/YES] buttons, you
can engage the split point by pressing the appropriate
key on the keyboard.
• If Function mode is not engaged, you can change the
split point to any other key by pressing the key while
holding the [SPLIT] button (page 27).
• An example of a key name indication for a split point
(F2)
followed by
a low bar if flat
F4.2: Split Balance
Setting range:
F4.3: Right Voice Octave Shift
F4.4: Left Voice Octave Shift
Setting range: –1, 0, 1
Normal setting: Different for each voice combination
You can shift the pitch up and down in octave steps for
the Right Voice and Left Voice independently. Make a
setting depending on the note range of the songs you
play. You can make this setting for each combination of
voices individually.
F4.5: Right Voice Effect Depth
F4.6: Left Voice Effect Depth
Setting range: 0 – 20
Normal setting: Different for each voice combination
These functions make it possible to individually set the
depth of the effect for the left and right Split mode
voices.
The effect depth settings cannot be changed unless the
[EFFECT] is ON. You must exit Function mode before
you can turn on an [EFFECT].
You can make this setting for each combination of voices
individually.
F4.7: Damper Pedal Range
Setting range:
ALL (for both voices)
1 (for the right Voice)
2 (for the left Voice)
Normal setting: ALL
The Damper Pedal Range function determines whether
the damper pedal affects the right voice, the left voice, or
both the left and right voices in Split mode.
F4.8: Reset
This function resets all Split mode functions to their
default values. Press the [+/YES] button to reset the values.
(G2)
followed by
a high bar if sharp
The volume level of the two voices combined in Split
mode can be adjusted as required. You can make this
setting for each combination of voices individually.
ENGLISH
F4. (CLP-370/340)
Split Mode Functions
0 – 20 (A setting of “10” produces an
equal balance between the two Split
mode voices. Settings below “10”
increase the volume of the left voice
in relation to the right voice, and settings above “10” increase the volume
of the right voice in relation to the
left voice.)
Normal setting: Different for each voice combination.
NOTE
SHORTCUT:
You can jump directly to Split mode functions
by pressing the
[TEMPO/FUNCTION] button while holding the [SPLIT] button.
To exit Function mode, you still need to press the [TEMPO/FUNCTION] button so that the TEMPO indicator lights up.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
65
Detailed Settings – [FUNCTION]
F5. (CLP-370/340) / F4. (CLP-S308/S306, CLP-330)
Other Functions
This section provides a variety of other functions,
including letting you assign the operation of the
left pedal to one of several modes, and allowing
you to select specific song channels for playback.
ENGLISH
1. Engage the Function mode and select
(CLP-370/340)/
(CLP-S308/S306, CLP330).
2. Press the [+/YES] button to engage the other
functions’ sub-mode, then use the [TEMPO/
FUNCTION ▼, ▲] buttons to select the desired
sub-mode.
Press the [–/NO] or [+/YES] button to select
the desired pedal function or assign the values.
Sub-mode
F5.1 (CLP-370/340)/F4.1
Left Pedal Mode
(CLP-S308/S306, CLP-330)
Setting range:
1. Soft Pedal
The soft pedal reduces the volume and slightly
changes the timbre of notes played while the pedal is
pressed. The soft pedal will not affect notes that are
already playing.
2. Song Play/Pause
This mode allows you to start or pause song playback.
In this mode, the Left Pedal functions in the same
manner as the SONG [PLAY/PAUSE] button on the
panel.
3. Variation (CLP-370/340)
This mode enables you to switch the Voice’s variation
on or off. In this mode, the left pedal functions in the
same manner as the [VARIATION] button on the
panel.
Normal setting: 1 (Soft Pedal)
F5.2 (CLP-370/340)/F4.2 (CLP-S308/S306, CLP-330)
Soft Pedal Effect Depth
Setting range: 1 – 5
Normal setting: 3
This function sets the depth of the soft pedal effect.
66
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
F5.3 (CLP-370/340)
Sustain Sample Depth
Setting range: 0 – 20
Normal setting: 12
The GRAND PIANO 1 voice features special “Sustain
Samples” that recreate the unique resonance of an acoustic
grand piano’s soundboard and strings when the damper
pedal is pressed. This function lets you adjust the depth of
this effect.
F5.4 (CLP-370/340)
Keyoff Sample Volume
Setting range: 0 – 20
Normal setting: 10
You can adjust the volume of the keyoff sound (the subtle sound produced when the keys are released) for voices
[GRAND PIANO1], [HARPSICHORD], [E.CLAVICHORD]
(including their variations).
F5.5 (CLP-370/340)/F4.3 (CLP-S308/S306, CLP-330)
Song Channel Selection
Setting range: ALL, 1&2
Normal setting: ALL
The setting here only affects Disklavier Piano Soft songs,
and non-protected External songs. You can specify which
song channels will play back on this instrument. When
“ALL” is selected, channels 1 – 16 will be played back.
When “1&2” is selected, only channels 1 and 2 will be
played back, while channels 3 – 16 will be transmitted via
MIDI.
Detailed Settings – [FUNCTION]
You can change the volume of the metronome
sound.
Use this function to adjust the metronome volume.
1. Engage the Function mode and select
(CLP-370/340)/
(CLP-S308/S306, CLP330).
2. Use the [–/NO] and [+/YES] buttons to set the
metronome volume as required.
Setting range: 1 – 20
Normal setting: 10
NOTE
SHORTCUT:
You can jump directly to the metronome functions
(CLP-370/
340)/
(CLP-S308/S306, CLP-330) by pressing the [TEMPO/
FUNCTION] button while holding the METRONOME [ON/OFF] button.
To exit the Function mode, you still need to press the [TEMPO/
FUNCTION] button so that the TEMPO indicator lights up.
F7. (CLP-370/340) / F6. (CLP-S308/S306, CLP-330)
MIDI Functions
You can make detailed adjustments to MIDI
settings.
For more information about MIDI, see the
“About MIDI” section (page 72).
All MIDI settings described below will affect the MIDI signal
in and out of the USB [TO HOST] connector.
1. Engage the Function mode and select
(CLP-370/340)/
(CLP-S308/S306, CLP330).
2. Press the [+/YES] button to engage the MIDI
function’s sub-mode, then use the [TEMPO/
FUNCTION ▼, ▲] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to set a
selected parameter.
ENGLISH
F6. (CLP-370/340) / F5. (CLP-S308/S306, CLP-330)
Metronome Volume
Sub-mode
F7.1: (CLP-370/340)/F7.1: (CLP-S308/S306, CLP-330)
MIDI Transmit Channel Selection
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer.
This parameter enables you to specify the channel on
which the Clavinova transmits MIDI data.
Setting range: 1 – 16, OFF (not transmitted)
Normal setting: 1
NOTE
In Dual mode, Voice 1 data is transmitted on its specified channel.
In Split mode (CLP-370/340), right voice data is transmitted on its
specified channel. In Dual mode, Voice 2 data is transmitted on the
next greater channel number relative to the specified channel. In
Split mode (CLP-370/340), left voice data is transmitted on the next
greater channel number relative to the specified channel. In either
mode, no data is transmitted if the transmit channel is set to “OFF.”
NOTE
Song data is not transmitted via the MIDI connections. However,
channels 3 – 16 of Disklavier Piano Soft songs, and non-protected
External songs will be transmitted via the MIDI connections depending on the Song Channel Selection setting (page 66).
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
67
Detailed Settings – [FUNCTION]
F7.2: (CLP-370/340)/F7.2: (CLP-S308/S306, CLP-330)
MIDI Receive Channel Selection
F7.4: (CLP-370/340)/F7.4: (CLP-S308/S306, CLP-330)
Program Change ON/OFF
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer. This parameter enables you to
specify the channel on which the Clavinova receives
MIDI data.
Setting range: ALL, 1&2, 1 – 16
Normal setting: ALL
Normally the instrument will respond to MIDI program
change numbers received from an external keyboard or
other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel
(the keyboard voice does not change). The instrument
will normally also send a MIDI program change number
whenever one of its voices is selected, causing the correspondingly-numbered voice or program to be selected
on the external MIDI device if the device is set up to
receive and respond to MIDI program change numbers.
This function makes it possible to cancel program
change number reception and transmission so that
voices can be selected on the instrument without affecting the external MIDI device.
ENGLISH
NOTE
ALL:
“Multi-timbre” Receive mode. This allows simultaneous reception of
different parts on all 16 MIDI channels, enabling the Clavinova to
play multi-channel song data received from F7.6 (CLP-370/340)/
F6.6 (CLP-S308/S306, CLP-330) or sequencer.
1&2:
“1&2” Receive mode. This allows simultaneous reception on channels 1 and 2 only, enabling the Clavinova to play 1 and 2 channel
song data received from a music computer or sequencer.
NOTE
Program change and other like channel messages received will not
affect the instrument’s panel settings or the notes you play on the
keyboard.
NOTE
No MIDI reception occurs when Demo mode is engaged or during
file operations.
F7.3: (CLP-370/340)/F7.3: (CLP-S308/S306, CLP-330)
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the keyboard controls its internal tone generator, allowing the
internal voices to be played directly from the keyboard.
This situation is “Local Control On,” since the internal
tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the
keyboard does not play the internal voices, but the
appropriate MIDI information is still transmitted via the
MIDI OUT terminal when notes are played on the keyboard. At the same time, the internal tone generator
responds to MIDI information received via the MIDI IN
terminal.
Setting range: ON/OFF
Normal setting: ON
NOTE
For information on program change numbers for each of the Instrument’s voices, Refer to MIDI Data Format on the web site.
http://www.yamaha.co.jp/manual/
Setting range: ON/OFF
Normal setting: ON
F7.5: (CLP-370/340)/F7.5: (CLP-S308/S306, CLP-330)
Control Change ON/OFF
Normally the CLP-370/340/330, CLP-S308/S306 will
respond to MIDI control change data received from an
external MIDI device or keyboard, causing the voice on
the corresponding channel to be affected by pedal and
other “control” settings received from the controlling
device (the keyboard voice is not affected).
The CLP-370/340/330, CLP-S308/S306 also transmits
MIDI control change information when the pedal or
other appropriate controls are operated.
This function makes it possible to cancel control change
data reception and transmission so that, for example, the
CLP-370/340/330, CLP-S308/S306’s pedal and other
controls can be operated without affecting an external
MIDI device.
NOTE
For information on control changes that can be used with the CLP370/340/330, CLP-S308/S306, refer to the MIDI Data Format in our
manual library at the following website.
http://www.yamaha.co.jp/manual/
Setting range: ON/OFF
Normal setting: ON
68
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Detailed Settings – [FUNCTION]
F7.6: (CLP-370/340)/ F7.6: (CLP-S308/S306, CLP-330)
Panel/Status Transmit
F7.7: (CLP-370/340)/F7.7: (CLP-S308/S306, CLP-330)
Initial Setup Send
This function causes all the current instrument panel settings (selected voice, etc.) to be transmitted via the MIDI
OUT terminal.
This function lets you send the data of the panel settings
to a computer. By transmitting the panel settings and
recording them on the MIDI sequence recorder prior to
the actual performance data, the instrument will be
automatically restored to the same settings when the performance is played back. You can also use this function to
change the settings of a connected tone generator to the
same settings as the instrument.
Procedure
1. Set up the panel controls as desired.
2. Connect the Clavinova to a sequencer via MIDI, and
set up the sequencer so it can receive the setup data.
3. Engage the Function mode and select
(CLP-
370/340)/
(CLP-S308/S306, CLP-330).
4. Press the [+/YES] button to transmit the panel/status
data.
will appear on the LED display when the data has
been successfully transmitted.
NOTE
For a list of the “Panel Data Contents” transmitted by this function,
refer to our manual library at the following website.
http://www.yamaha.co.jp/manual/
NOTE
Receiving the transmitted data:
1. Connect the Clavinova via MIDI to the device to which the setup
data was transmitted previously.
2. Start sending the setup data from the device.
The Clavinova automatically receives the setup data, which will be
reflected in the panel settings.
(For the data to be accepted, the Clavinova that receives the setup
data should be the same model as the one that transmitted the
setup data to the sequencer.)
Procedure
1. Set up the panel controls as desired.
2. Connect the Clavinova to a sequencer via MIDI, and
set up the sequencer so it can receive the setup data.
3. Engage the Function mode and select
(CLP-
370/340)/
(CLP-S308/S306, CLP-330).
4. Press the [+/YES] button to transmit the panel/status
data.
ENGLISH
TERMINOLOGY
Setup Data:
Data that contains a set of panel settings for the Clavinova.
will appear on the LED display when the data has
been successfully transmitted.
The following data can be sent.
• Voice selection
• [REVERB] type
• [REVERB] depth
• [EFFECT] type
• [EFFECT] depth
• Split point
• Tuning (F1)
• Dual detune (F3.2)
NOTE
For more information on transmitting and receiving setup data via
MIDI, refer to the owner’s manual for the connected MIDI device.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
69
Detailed Settings – [FUNCTION]
F8. (CLP-370/340) / F7. (CLP-S308/S306, CLP-330)
Backup Functions
TERMINOLOGY
ENGLISH
Backup:
You can back up some settings, such as voice selection and reverb
type, so that they will not be lost when you turn off the power to the
Clavinova.
If the backup function is turned on, the settings at power off are
effective. If the backup function is turned off, the settings in memory
are erased when you turn off the power. In this case, when you turn
on the power to the unit, the default settings (the initial settings) will
be used. (The factory setting default list is found on page 98.)
However, the backup settings themselves, the contents of
the user song recorder memory, character code settings
and internet settings are always backed up.
You can turn the backup function on or off for
each function group (each of the following
sub-mode functions).
1. Engage the Function mode and select
(CLP-370/340)/
(CLP-S308/S306, CLP330).
2. Press the [+/YES] button to engage the
backup function’s sub-mode, then use the
[TEMPO/FUNCTION ▼, ▲] buttons to select
the desired sub-mode.
Press the [–/NO] or [+/YES] button to turn the
backup function on or off.
Sub-mode
F9.1: (CLP-370/340)/F8.1: (CLP-S308/S306, CLP-330)
Voice
Description of sub-modes
F9.1: (CLP-370/340)/F7.1: (CLP-S308/S306, CLP-330)
Voice
• Voice (Keyboard, Dual, and Split <CLP-370/340>)
• Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
• Split (CLP-370/340) (ON/OFF, Voice, and Split Functions for each voice combination)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
• Variation (CLP-370/340) (for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume <
(CLP-370/340)/
(CLP-S308/S306, CLP-330) settings>)
F9.2: (CLP-370/340)/F7.2: (CLP-S308/S306, CLP-330)
MIDI
The MIDI functions (
<CLP-370/340>/
<CLP-S308/S306, CLP-330> settings)
(expect for the F7.6 and F7.7 <CLP-370/340>/
and
<CLP-S308/S306, CLP-330>)
F9.3: (CLP-370/340)/F7.3: (CLP-S308/S306, CLP-330)
Tuning
• Transpose
• Tuning (
settings)
• Scale (including base note) (
settings)
F9.4: (CLP-370/340)/F8.4: (CLP-S308/S306, CLP-330)
Others
• Other functions (
<CLP-370/340>/
<CLP-S308/S306, CLP-330> settings)
• BRILLIANCE setting
• DAMPER RES. ON/OFF and Depth
F9.2: (CLP-370/340)/F8.2: (CLP-S308/S306, CLP-330)
MIDI
F9.3: (CLP-370/340)/F8.3: (CLP-S308/S306, CLP-330)
Tuning
F9.4: (CLP-370/340)/F8.4: (CLP-S308/S306, CLP-330)
Others
Setting range: ON/OFF
Normal setting: Voice: OFF
MIDI – Others: ON
F8.5 (CLP-370/340)/ F7.5 (CLP-S308/S306, CLP-330)
Character Code
If the song cannot be loaded, you may need to change the
character code setting.
Setting range: Int (English)/JA (Japanese)
Normal setting: Int
F9. (CLP-370/340)/ F8.
LAN Settings
(CLP-S308/S306)
For details on how to set the LAN, see on pages 46 – 53, 58.
70
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Connections
Connections
Connectors
CAUTION
Before connecting the Clavinova to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to
the components may result.
CLP-370/340/330
SELECT
IN
L/L+R
5
CLP-370/340 only
6
4
3
TO DEVICE
TO HOST
R
USB TO DEVICE
USB
CLP-370/340 only
ENGLISH
OUT
MIDI
L/L+R
AUX IN
1
On the left of the panel
R
2
AUX OUT
THRU
Show the jacks as seen when
viewed from below the instrument.
3
CLP-370/340 only
CLP-S308/S306
Left
Right
5
4
2
1
6
1 AUX OUT [L/L+R][R] jacks
You can connect these jacks to a Keyboard amplifier system to monitor your playing. Refer to the diagram below and use cables to make the connections. The Master volume affects the AUX OUT signal. If you want to turn off the sound of the
internal speakers, use the speaker switch (page 15).
NOTE
Use cables and plugs with no
resistance.
CAUTION
When the Clavinova’s AUX OUT jacks are connected to an external audio system, first turn on the
power to the Clavinova, then to the external audio system. Reverse this order when you turn the
power off.
Clavinova
Keyboard amplifier
AUX OUT
R
NOTE
Do not input the sound from the
AUX OUT jacks to the AUX IN
jacks. This may cause a feedback
loop, and the output sound may
be excessively loud.
L/L+R
AUX OUT
AUX IN
Phone plug
Phone plug
NOTE
If you want to take a mono signal
via the AUX OUT jack, connect a
cable to the [L/L+R] jack.
Cable
The sound via the internal speakers and headphones is set to the proper condition automatically (see below).
Speakers sound
Speakers do not sound
No plugs to connected to AUX OUT jacks
Plugs connected to AUX OUT jacks
Speakers On
Speakers Normal
(Headphones Switch)
Speakers Off
Speakers On
Speakers Normal
(Headphones Switch)
Speakers Off
Headphones
connected
Optimum equalization for
speakers applied
Flat
Flat
Flat
Flat
Flat
Headphones
not connected
Optimum equalization for
speakers applied
Optimum equalization for
speakers applied
Flat
Flat
Flat
Flat
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
71
Connections
2 AUX IN [L/L+R][R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the Clavinova’s
speakers. Refer to the diagram below and use audio cables to make the connections.
CAUTION
When the Clavinova’s AUX IN jacks are connected to an external device, first turn on the power to
the external device, then to the Clavinova. Reverse this order when you turn the power off.
NOTE
The Clavinova’s [MASTER VOLUME] slider setting affect the
input signal from the AUX IN
jacks, but the [BRILLIANCE],
[REVERB], and [EFFECT] settings do not.
NOTE
Clavinova
Phone plug
(standard)
R
L/L+R
AUX IN
ENGLISH
If you connect the Clavinova to a
monaural device, use only the
AUX IN [L/L+R] jack.
OUTPUT
AUX IN
Phone plug
(standard)
Tone Generator
Audio cable
Plug shape depends on
the device.
AUX IN
Phone plug
(standard)
LINE OUT
Audio cable
Tone Generator
3 USB [TO DEVICE] terminal
This terminal allows connection to USB storage devices.
Refer to “Connection to a USB storage device” on page 73.
4 USB [TO HOST] terminal
This terminal allows direct connection to a personal computer. Refer to “Connecting a Personal Computer” on page 75 for more information.
5 MIDI [IN] [OUT] [THRU] terminals
Use MIDI cables to connect external MIDI devices to these connectors.
MIDI [IN]: Receives MIDI data.
MIDI [OUT]: Transmits MIDI data.
MIDI [THRU]: Transmits data received at the MIDI [IN] terminal as it is.
About MIDI
MIDI (Musical Instrument Digital Interface) is a standard format for data transmission/
reception. It enables the transfer of performance data and commands between MIDI devices
and personal computers. Using MIDI, you can control a connected MIDI device from the
Clavinova, or control the Clavinova from a connected MIDI device or computer.
6 [LAN] terminal (CLP-370/340, CLP-S308/S306)
Connect to the internet (see page 46).
72
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
NOTE
There are two different types of
USB terminals on the instrument:
USB [TO DEVICE] and USB [TO
HOST]. Take care not to confuse
the two terminals and the corresponding cable connectors. Be
careful to connect the proper plug
in the proper direction.
NOTE
MIDI performance data and commands are transferred in the form
of numeric values.
NOTE
Since MIDI data that can be
transmitted or received varies
depending on the type of MIDI
device, check the “MIDI Implementation Chart” to find out what
MIDI data and commands your
devices can transmit or receive.
Refer to the MIDI Implementation
Chart in the Data Format on the
website.
For information on how to access
and obtain the Data Format list,
see page 3.
Direct URL:
http://www.yamaha.co.jp/manual/
Connections
Connection to a USB storage device
By connecting the instrument to a USB storage device with a standard USB cable, you can save data
you’ve created to the connected device, as well as read data from the connected device.
Compatible USB storage devices
The instrument does not necessarily support all commercially available USB storage devices. Yamaha cannot guarantee operation of USB storage devices that you purchase. Before purchasing USB storage devices,
please consult your Yamaha dealer, or an authorized Yamaha distributor (see list at end of the Owner’s Manual) for advice, or visit the following web page:
http://music.yamaha.com/download/
NOTE
CD-ROM drive
Although CD-R/RW drives can be
used to read data to the instrument, they cannot be used for
saving data.
NOTE
Do not use a non-ID SmartMedia
card.
NOTE
CAUTION
Avoid frequently turning the power on/off to the USB storage device, or connecting/disconnecting the cable too often. Doing so may result in the operation of the instrument “freezing” or
hanging up. While the instrument is accessing data (such as during Save, Delete, Load and Format
operations) or is mounting the USB storage device (shortly after the connection: until the “LOAD
TO USER” LED flash stops), do NOT unplug the USB cable, do NOT remove the media from the
device, and do NOT turn the power off to either devices. Doing so may corrupt the data on either
or both devices.
Connection to a USB storage device
The CLP-370/340 has two USB [TO DEVICE] terminals; one on the left of the panel and
one on the terminal at the bottom.
USB [TO DEVICE] terminal A
Select the desired terminal
Number of USB storage devices
Only one USB storage device can
be connected to the USB [TO
DEVICE] terminal. This instrument can recognize only a single
drive in a USB storage device. If
one storage device contains more
than one drive, only one drive will
be automatically selected and
recognized.
ENGLISH
A USB storage device, such as a floppy disk drive, hard disk drive, CD-ROM drive, flash
memory reader/writer, etc., can be connected to the USB [TO DEVICE] terminal. Other
USB devices such as a computer keyboard or mouse cannot be used.
NOTE
(CLP-370/340) If you connect
USB storage devices to both USB
[TO DEVICE] terminals, the
devices may not operate properly.
NOTE
Do not connect a USB hub to the
instrument.
SELECT
USB TO DEVICE
NOTE
USB [TO DEVICE] terminal B
Both are the same terminal; however, both cannot be used at the same time. Use the
[SELECT] switch to select the desired terminal. Switching to “A” selects the terminal on
the left of the panel, while switching to “B” selects the terminal panel at the bottom.
When the device is mounting, the FILE “LOAD TO USER” indicator flashes. When the
mounting operation is completed, the indicator goes off.
CAUTION
Remove the USB storage device
from the instrument before you
switch the A/B terminals.
NOTE
Though the instrument supports
the USB 1.1 standard, you can
connect and use a USB 2.0 storage device with the instrument.
However, note that the transfer
speed is that of USB 1.1.
While the instrument is accessing data (such as in the Save, Export, Load, Delete or Format operations) or is mounting the USB storage device (shortly after the connection: until the FILE LOAD
LED flash stops), do NOT use the [SELECT] switch. Doing so may corrupt the media or data.
CAUTION
Disconnect the optional USB storage device connected to the [USB TO DEVICE] A terminal before
closing the key cover. Closing the cover with the device still connected may damage the device.
Formatting USB storage media
When executing a file-related operation with a connected USB storage device, a “For”
message may appear, indicating that the device or media may be unformatted. If this
happens, format the media (page 40).
CAUTION
The format operation overwrites any previously existing data. Proceed with caution.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
73
Connections
To protect your data (write-protect):
To prevent important data from being inadvertently erased, apply the write-protect provided with each
storage device or media. If you are saving data to the USB storage device, make sure to disable write-protect.
To display the data in the USB storage device
To view the data of the USB storage device on the CLP display, press the [SONG
SELECT] button a few times until the “USB” indicator lights (page 45).
Backing up your data to a computer
ENGLISH
■ Backing up the instrument data to a computer
Once you’ve saved data to a USB storage device, you can copy the data to the hard disk of your
computer, then archive and organize the files as desired. Simply reconnect the device as
shown below.
Saves internal data to a USB storage device.
Instrument
USB [TO DEVICE] terminal
USB storage
device
Disconnect the USB storage device from the instrument and connect it
to the computer.
Backing up data to a computer and organizing files/folders.
Computer
USB storage device
■ Copying files from a computer hard disk to a USB storage device
Files contained on the hard disk of a computer can be transferred to the instrument by first
copying them to the storage media, then connecting/inserting the media to the instrument.
Not only files created on the instrument itself but also Standard MIDI files created on other
devices can be copied to a USB storage device from the hard disk of the computer.
Once you’ve copied the data, connect the device to the USB [TO DEVICE] terminal of the
instrument, and play back the data on the instrument.
Copying the files of the hard disk of the computer to the
USB storage device.
Computer
USB storage device
Disconnect the USB storage device from the computer and connect it
to the instrument.
Reading files on the USB storage device from the instrument.
USB [TO DEVICE] terminal
USB storage
device
74
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Instrument
Connections
Connecting a Personal Computer
By connecting a computer to the Clavinova’s USB [TO HOST] terminal, you can transfer data
between the instrument and the computer via MIDI. To do this, install the USB-MIDI driver and
Musicsoft Downloader software (refer to the included “Accessory CD-ROM Installation Guide”).
CAUTION
CAUTION
If you are not using the connection between the Clavinova and your computer, you must disconnect the cable from the USB [TO HOST] terminal. The Clavinova may not operate correctly if a
cable is left connected.
Use a USB cable to connect the USB port on your computer to the USB [TO HOST]
terminal on the Clavinova.
Instrument
USB
TO DEVICE
TO HOST
USB [TO HOST] terminal
TERMINOLOGY
Driver:
A driver is software that provides
a data-transfer interface between
the computer’s operating system
and a connected hardware
device. You need to install a USB
MIDI driver to connect the computer and the instrument.
NOTE
• The instrument will begin transmission a short time after the
USB connection is made.
• When using a USB cable to
connect the instrument to your
computer, make the connection directly without passing
through a USB hub.
• For information on setting up
your sequence software, refer
to the owner’s manual of the
relevant software.
ENGLISH
When connecting the Clavinova to a personal computer, first turn off the power to both the Clavinova and the computer before connecting any cables. After making connections, turn on the
power to the computer first, then to the Clavinova.
USB cable
Computer
Precautions when using the USB [TO HOST] terminal
When connecting the computer to the USB [TO HOST] terminal, make sure to observe the
following points. Failing to do so risks freezing the computer and corrupting or losing the
data. If the computer or the instrument freezes, restart the application software or the computer OS, or turn the power to the instrument off then on again.
CAUTION
• Use an AB type USB cable of less than about 3 meters.
• Before connecting the computer to the USB [TO HOST] terminal, exit from any power-saving mode of the computer (such as suspended, sleep, standby).
• Before turning on the power to the instrument, connect the computer to the USB [TO
HOST] terminal.
• Execute the following before turning the power to the instrument on/off or plugging/
unplugging the USB cable to/from the USB [TO HOST] terminal.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from the instrument. (Data is transmitted
only by playing notes on the keyboard or playing back a song.)
• While the computer is connected to the instrument, you should wait for six seconds or
more between these operations: (1) when turning the power of the instrument off then on
again, or (2) when alternately connecting/disconnecting the USB cable.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
75
Transmitting Song Data between the Computer and the Instrument
Transmitting Song Data between the
Computer and the Instrument
In addition to the demo songs and the 50 piano preset songs stored in this instrument,
you can play data for other song by loading it from a connected computer. To be able to
use this function, you must first download Musicsoft Downloader from Yamaha website, and install it on your computer (refer to “Accessory CD-ROM for Windows Installation Guide”).
ENGLISH
System requirement for Musicsoft Downloader
• OS
: Windows 2000/XP Home Edition/XP Professional/Vista
*For XP and Vista, the 32-bit version is supported, but not the 64-bit version.
• CPU
• Display
: Intel® Pentium® or Celeron® chip of 233MHz or Higher (500 MHz or higher is recommended) or higher
: 64MB or more (256MB or more is recommended)
: at least 128MB of free space (at least 512MB of free space is recommended)
disk capacity
: 800 x 600 High Color (16-bit)
• Others
: Microsoft® Internet Explorer® version 5.5 or higher
• Memory
• Available hard
Loading Song Data from a Computer
to the Instrument
You can load piano song data from a computer to this instrument. Also, after you
record your performance on this instrument and save the recording to a computer, you
can load the recording back to the instrument.
This instrument can read MIDI data in SMF Format 0. However, if such data includes
any information for functions that are not supported by this instrument, the instrument will not play the data correctly.
For more information on loading song data from a computer to this instrument, please
refer to “Transferring Data Between the Computer and Instrument (for unprotected
data)” in the Help file that came with Musicsoft Downloader.
NOTE
You can download free Musicsoft
Downloader from the Yamaha
website.
NOTE
Do not manually change the file
name by using a computer; doing
so will render the file unable for
loading on the instrument.
NOTE
SMF (Standard MIDI File)
This file features a popular
sequence format (for recording
performance data). This file is
sometimes called a “MIDI file.”
The file extension is MID.
You can play the SMF format
song using music software or a
sequencer that supports SMF.
This instrument also supports
SMF.
Requirements for song data that can be loaded from a computer to this instrument
• Songs
• Maximum data size
• Data format
:
:
:
:
user songs (loaded from instrument), SMF Format 0 songs
748KB
SMF Format 0
Backuped data (loaded from instrument)
File name
08CLP-M.BUP (CLP-370/340)
08CLP-ML.BUP (CLP-330)
08CLP-S.BUP (CLPS308/S306)
You can play the loaded Songs (page 44).
NOTE
CAUTION
Do not turn off the power to this instrument or unplug the instrument during data transmission.
Otherwise, the data being transmitted will not be saved. Furthermore, flash memory operation
may become unstable, causing the entire memory to be erased when you turn the power to the
instrument on or off.
76
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Before you use this instrument,
close the Musicsoft Downloader
window and quit the application.
Transmitting Song Data between the Computer and the Instrument
Transmitting Song Data from the
Instrument to a Computer
Musicsoft Downloader enables you to transfer the user song in this instrument to a
computer. For more information on transferring song data from this instrument to a
computer, please refer to “Transferring Data Between the Computer and Instrument
(for unprotected data)” in the Help file that came with Musicsoft Downloader.
Data you can transfer from this instrument to a computer
ENGLISH
• User song
: your recorded songs
• Back up data
: panel settings
• Song data (once it has been loaded from the computer)
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
77
Data Backup
Data Backup
For maximum data security Yamaha recommends that you save your important data to your computer by using the application Musicsoft Downloader (MSD). This provides a convenient backup if
the internal memory is damaged (refer to the “Accessory CD-ROM for Windows Installation
Guide”).
ENGLISH
Data that can be saved
• Panel settings and recorded User songs
Panel settings are the same data that can be backed up using the Backup Functions
(page 70). You can save the panel settings and recorded User songs as one file.
NOTE
The file described in #1 at left
cannot be saved to a USB storage device (CLP-370/340).
• External songs received via computer.
This includes external songs saved from the computer by using Musicsoft Downloader.
Procedure
1. Install the USB MIDI driver and the MSD to your
computer (Windows), then connect the computer
and the instrument.
For installation, see the separate Installation Guide.
For connection, see page 75.
2. Move the data to the computer.
By using the MSD, save the “CLP-xxx.BUP” file from “System Drive” under
“Electronic Musical Instruments” to the computer.
The “CLP-xxx.BUP” file contains the panel settings and recorded User songs.
Also, if you store the external songs in the instrument from the computer, move
the songs from “Flash Memory” under “Electronic Musical Instruments” to the
computer via the MSD.
For instruction on using the MSD, see the Help in the MSD.
To recall the settings and load the songs to the instrument, move the “CLPxxx.BUP” file and the External songs under the folders to which you saved the
files.
NOTE
When MSD is started on a computer connected to the instrument, “con (computer
connection)” appears in the display. When this indication
appears, you cannot operate the
instrument.
NOTE
The Musicsoft Downloader cannot be used when the instrument
is in the following state:
• During Demo mode.
• During song playback.
• During Record mode.
• During file operation (one of the
[FILE] button indicators is lit).
NOTE
The panel settings and User
songs (CLP-xxx.BUP file) remain
in the instrument after being
saved to the computer.
78
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Message List
Message List
Message
CLr
Comment
Displayed after factory presets are recalled.
CAUTION
con
Displayed when Musicsoft Downloader is started on a computer connected to the instrument.
When this message appears, you cannot operate the instrument.
E01
Indicates failure in accessing the USB storage device because the device or media is damaged.
E02
Displayed when the song data is damaged or not recognized.
E04
Indicates that the song data is too large to be loaded.
End
Displayed when the current operation is completed.
Err
Displayed when the MIDI/USB cable is disconnected while starting Musicsoft Downloader on a computer connected to the instrument.
FCL
Indicates that internal memory has been cleaned up. Recorded songs, panel settings and external songs
which have been loaded from a computer are cleared, because the power has been turned off before the song
save or load operations were completed.
ENGLISH
Do not turn off the power of the instrument when “CLr” appears in the display. Doing so may delete all song
data in the instrument, including external songs (page 44).
CAUTION
Do not turn off the power of the instrument when “FCL” appears in the display.
For
Indicates that the instrument has engaged format mode for the USB storage device.
FUL
Displayed when internal memory becomes full during song recording.
Displayed when the USB storage device becomes full and the song cannot be saved.
Displayed when the total amount of files has become too large.
Lod
Displayed when a protected song is loading.
ny
Confirms whether each operation is executed or not.
n–y
Reconfirms whether the overwriting, delete or format operation is executed or not.
Pro
Indicates that the USB storage device or media is protected.
* Regarding the messages (and their explanations) for Internet Direct Connection, refer to the Yamaha web site:
http://services.music.yamaha.com/
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
79
Troubleshooting
Troubleshooting
ENGLISH
Problem
Possible Cause and Solution
The Clavinova does not turn on.
The Clavinova has not been plugged in properly. Securely insert the female plug into
the socket on the Clavinova, and the male plug into a proper AC outlet (page 14).
A click or pop is heard when the power is
turned on or off.
This is normal when electrical current is being applied to the instrument.
Noise is heard from the speakers or headphones.
The noise may be due to interference caused by the use of a mobile phone in close
proximity to the Clavinova. Turn off the mobile phone, or use it further away from the
Clavinova.
The overall volume is low, or no sound is
heard.
• The Master Volume is set too low; set it to an appropriate level using the [MASTER
VOLUME] control.
• Make sure a pair of headphones is not connected to the headphones jack (when the
SPEAKER switch is set to the “NORMAL” position). If the SPEAKER switch is set to
the “OFF” position, set it to “NORMAL” or “ON” (page 15).
• Make sure that Local Control (page 68) is ON.
The speakers do not switch off when a pair of
headphones is connected.
The SPEAKER switch may be switched “ON.” Set the SPEAKER switch to the “NORMAL” position (page 15).
The damper pedal has no effect, or the sound
continuously sustains even when the damper
pedal is not pressed.
The pedal cable/plug may not be properly connected. Make sure to securely insert the
pedal plug into the proper jack (pages 83, 86).
The speaker sound is changed.
The AUX OUT jack may be connected. Make sure to disconnect the plug (see page 71).
Even though a USB storage device is connected, the SONG SELECT “USB” indicator
does not turn on when pressing the [SONG
SELECT] button.
The USB storage device may not be recognized by the instrument, depending on the
device itself or the timing of the recognition.
1. (CLP-370/340) cheek the [SELECT] switch.
Switching to “A” selects the terminal on the left of the panel, while switching to “B”
selects the terminal panel at the bottom.
2. Check that the device is not damaged.
Check that the FILE “LOAD TO USER” indicator flashes after connecting the USB
storage device. If the indicator does not flash, the device may be damaged.
3. Check that the compatibility of the device has been confirmed by Yamaha (page 73).
4. Select SONG SELECT “USB” again.
It may take a while for the instrument to recognize the USB storage device. Press
the [SONG SELECT] button again to turn the “USB” indicator on.
The USB storage device has hung up
(stopped).
• The USB storage device is not compatible with the instrument. Only use the devices
whose compatibility has been confirmed by Yamaha (page 73).
• Turn the instrument off and disconnect the device, then turn it back on and reconnect the device.
The three LEDs of “SAVE TO USB,” “LOAD
TO USER” and “DEL/FORMAT” at the [FILE]
button flash simultaneously when a storage
device is connected.
Disconnect the USB storage device and turn the power of the instrument off. The USB
storage device is not compatible with the instrument.
The three LEDs of “SAVE TO USB,” “LOAD
TO USER” and “DEL/FORMAT” at the [FILE]
button flash simultaneously for five seconds
when the USB storage device is operated.
Try disconnect the USB storage device once, then reconnect it.
Nothing is indicated in the LED display.
Press the [–/NO] or [+YES] button and try again the operation again.
Options
BC-100 Bench
A comfortable bench styled to match your Yamaha Clavinova.
HPE-160 Stereo Headphones
High-performance lightweight dynamic headphones with extra-soft ear pads.
UD-FD01 USB-FDD Unit
Floppy disk drive for connecting to the instrument and saving/loading data.
80
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
CLP-370: Keyboard Stand Assembly
CLP-370: Keyboard Stand Assembly
CAUTION
• Assemble the unit on a flat floor surface.
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble the
unit in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect
screws can cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of the unit.
• To disassemble the unit, reverse the assembly sequence given below.
ENGLISH
Have a Philips-head (+) screwdriver of the appropriate size ready.
Remove all parts from the package and make sure you have all of the items.
Assembly Parts
A
6 x 25 mm long screws x 4
4 x 20 mm tapping
screws x 4
6 x 16 mm short screws x 6
Cord holders x 2
Foamed styrol pads
Remove foamed styrol pads from the package, position them
on the floor, then place A on top of them.
Position the pads so that they will not block the speaker box
on the bottom of A.
4 x 12 mm thin screws x 2
B
Headphone hanger
4 x 10 mm thin screws x 2
C
Headphone hanger
A bundled pedal cord is attached to the reverse side.
Power cord
D
E
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
81
CLP-370: Keyboard Stand Assembly
1.
3.
Attach C to D and E.
D
Mount A.
Make sure that you mount the main unit by
holding the front bottom in areas that are at least
15 cm towards the center from either end and by
the handles on the rear panel.
C
A
E
1-2
ENGLISH
1-1
1-1
Untie and straighten out the bundled pedal cord.
Do not discard the vinyl tie. You will need it later
in step 5.
1-2
Attach D and E to C by tightening four long
screws (6 x 25 mm).
2.
2-1
2-2
2-3
15 cm or further in
Align the screw
holes.
Attach B.
Depending on the model of Clavinova you purchased, the surface color of one side of B may be
different from the other side. In this case, position B so that the side of the surface color most
similar to D and E faces you (as you would play
the instrument)
Align the screw holes on the upper side of B with
the bracket holes on D and E, then attach the
upper corners of B to D and E by finger-tightening two thin screws (4 x 12 mm).
Secure the bottom end of B using four tapping
screws (4 x 20 mm).
CAUTION
Be extra careful not to drop or let your fingers be pinched by the
main unit.
CAUTION
Do not hold the main unit in any position other than the position specified above.
4.
Secure A.
4-1
Adjust the position of A so that the left and right
ends of A will project beyond D and E equally
(as seen from the front).
4-2
Secure A by tightening six short screws (6 x 16
mm) from the front.
4-1
Securely tighten the screws on the top of B that
were attached in Step 2-1.
A
Projection of A
2-1
2-3
E
A
B
D
2-2
82
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
4-2
CLP-370: Keyboard Stand Assembly
5.
7.
Connect the pedal cord.
5-1
Pass the pedal cord from the rear and insert the
plug into the pedal connector.
5-2
Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
5-3
Use a vinyl tie to take up any slack in the pedal
cord.
PE
DA
5-1
L
Attach the headphone hanger.
Use the included two screws (4 x 10 mm) to
attach the hanger as shown in the illustration.
ENGLISH
8.
Set the adjuster.
Rotate the adjuster until the pedal box comes in
firm contact with the floor surface.
110
127
220
6-2
240
6-1
After completing the assembly, please check the following.
• Are there any parts left over?
Review the assembly procedure and correct any
errors.
5-2
5-3
• Is the instrument clear of doors and other movable
fixtures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise when you
shake it?
Tighten all screws.
• Does the pedal box rattle or give way when you step
on the pedals?
Turn the adjuster so that it is set firmly against the floor.
6.
6-1
• Are the pedal and power cords inserted securely into
the sockets?
Check the connection.
Connect the power cord.
Set the voltage selector (for models that feature a
voltage selector).
Voltage Selector
Before connecting the AC power cord, check the setting
of the voltage selector which is provided in some
areas. To set the selector for 110V, 127V, 220V or 240V
main voltages, use a “minus” screwdriver to rotate the
selector dial so that the correct voltage for your region
appears next to the pointer on the panel. The voltage
selector is set at 240V when the unit is initially
shipped. After the proper voltage has been selected,
connect the AC power cord to the AC IN and an AC
wall outlet. A plug adaptor may be also provided in
some areas to match the pin configuration of the AC
wall outlets in your area.
6-2
Pass the power cord from the rear and insert the
plug into the power connector.
• If the unit creaks or is otherwise unsteady when you
play on the keyboard, refer to the assembly diagrams
and retighten all screws.
CAUTION
When moving the instrument after assembly, always hold
instrument by the lower surface in the front of the main unit
and by the handles in the rear of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper handling
can result in damage to the instrument or personal injury.
Top portion
Key cover
Hold here.
Do not hold
here.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
83
CLP-340/330: Keyboard Stand Assembly
CLP-340/330: Keyboard Stand Assembly
ENGLISH
CAUTION
• Assemble the unit on a flat floor surface.
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please
assemble the unit in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of
incorrect screws can cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of the unit.
• To disassemble the unit, reverse the assembly sequence given below.
Have a Philips-head (+) screwdriver of the appropriate size ready.
Remove all parts from the package and make sure you have all of the items.
Assembly Parts
6 x 25 mm long screws x 4
4 x 20 mm tapping
screws x 4
6 x 16 mm short screws x 4
Cord holders x 2
A
Foamed styrol pads
Remove foamed styrol pads from the package, position
them on the floor, then place A on top of them.
Position the pads so that they will not hide the connectors
on the bottom of A.
4 x 12 mm thin screws x 2
Headphone hanger
B
4 x 10 mm thin screws x 2
C
A bundled pedal cord is attached to the reverse side.
Power cord
D
84
E
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Headphone hanger
CLP-340/330: Keyboard Stand Assembly
1.
3.
Attach C to D and E.
D
C
E
A
15 cm or
further in
1-2
1-1
Untie and straighten out the bundled pedal cord.
Do not discard the vinyl tie. You will need it later
in step 5.
1-2
Attach D and E to C by tightening four long
screws (6 x 25 mm).
2.
15 cm or
further in
ENGLISH
1-1
Mount A.
Be sure to place your hands at least 15 cm from
either end of the main unit when positioning it.
CAUTION
Attach B.
Depending on the model of Clavinova you purchased, the surface color of one side of B may be
different from the other side. In this case, position B so that the side of the surface color most
similar to D and E faces you (as you would play
the instrument).
Be extra careful not to drop or let your fingers be pinched by the
main unit.
CAUTION
Do not hold the main unit in any position other than the position specified above.
4.
Secure A.
2-1
Place the lower side of B on each foot of D and E,
then align the screw holes on the upper side of B
with the bracket holes on D and E.
4-1
Adjust the position of A so that the left and right
ends of A will project beyond D and E equally (as
seen from the front).
2-2
Attach the top corners of B to D and E by fingertightening two thin screws (4 x 12 mm).
4-2
Secure A by tightening the short screws (6 x 16
mm) from the front.
2-3
While pushing the lower part of D and E from
outside, secure the bottom end of B using four
tapping screws (4 x 20 mm).
2-4
Securely tighten the screws on the top of B that
were attached in Step 2-2.
4-1
Projection
of A
A
2-2
2-4
2-1
E
Place the bottom end of the
rear panel on
each foot.
B
D
4-2
Insert the screw in the front of
these two holes.
2-3
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
85
CLP-340/330: Keyboard Stand Assembly
5.
Connect the pedal cord and power cord.
Pass the pedal cord from the rear and insert the
plug into the pedal connector.
5-2
Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
5-3
Use a vinyl tie to take up any slack in the pedal
cord.
P
E
D
A
L
5-1
7.
8.
Set the adjuster.
Rotate the adjuster until the pedal box comes in
firm contact with the floor surface.
Attach the headphone hanger.
Use the included two screws (4 x 10 mm) to
attach the hanger as shown in the illustration.
S
NE
O
PH
ENGLISH
5-1
5-3
After completing the assembly, please check the following.
• Are there any parts left over?
Review the assembly procedure and correct any
errors.
5-2
6-2
6.
6-1
6-1
Connect the power cord.
Set the voltage selector (for models that feature a
voltage selector).
Voltage Selector
Before connecting the AC power cord, check the setting
of the voltage selector which is provided in some
areas. To set the selector for 110V, 127V, 220V or 240V
main voltages, use a “minus” screwdriver to rotate the
selector dial so that the correct voltage for your region
appears next to the pointer on the panel. The voltage
selector is set at 240V when the unit is initially
shipped. After the proper voltage has been selected,
connect the AC power cord to the AC IN and an AC
wall outlet. A plug adaptor may be also provided in
some areas to match the pin configuration of the AC
wall outlets in your area.
6-2
• Is the instrument clear of doors and other movable
fixtures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise when you
shake it?
Tighten all screws.
• Does the pedal box rattle or give way when you step
on the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted securely into
the sockets?
Check the connection.
• If the unit creaks or is otherwise unsteady when you
play on the keyboard, refer to the assembly diagrams
and retighten all screws.
CAUTION
When moving the instrument after assembly, always hold the
bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper handling
can result in damage to the instrument or personal injury.
Top portion
Pass the power cord from the rear and insert the
plug into the power connector.
Key cover
Do not hold
here.
Hold here.
Do not hold
here.
86
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
CLP-S308/S306: Keyboard Stand Assembly
CLP-S308/S306: Keyboard Stand Assembly
ENGLISH
CAUTION
• Assemble the unit on a flat floor surface.
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please
assemble the unit in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of
incorrect screws can cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of the unit.
• To disassemble the unit, reverse the assembly sequence given below.
Have a Philips-head (+) screwdriver of the appropriate size ready.
Remove all parts from the package and make sure you have all of the items.
A
Assembly Parts
Protective
sheet
6 x 20 mm long screws x 10
4 x 20 mm tapping
screws x 5
6 x 16 mm short screws x 6
Cord holders x 2
Connector panel
Foamed styrol pads
Remove foamed styrol pads from the package, position
them on the floor, then place A on top of them.
Position the pads so that they will not hide the connectors
on the bottom of A.
4 x 14 mm thin screws x 5
CAUTION
Please keep the protective sheet for later use. It will be used to
protect the keyboard from being scratched when the instrument
is transported. The protective sheet should be spread over the
entire keyboard before closing the key cover.
Headphone hanger
4 x 10 mm thin screws x 2
Headphone hanger
B
Power cord
C
Pedal cord
D
E
F
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
87
CLP-S308/S306: Keyboard Stand Assembly
1.
3.
Attach D to E and F.
1-1
1-3
F
Mount A.
3-1
Place your hands at least 15 cm from either end
of A to mount it.
3-2
Position A so that the stopper-wood on the rear
side of the bottom of A will be located behind the
front panel, then slide A slowly toward the rear
while lightly pushing E and F toward the center.
* Be sure to slide the guide pins 1 on each side of
A into the guide slots 2 on E and F respectively.
E
D
1
ENGLISH
1-2
1-1
A
2
Attach D to E and F by using four long screws
(6 x 20 mm).
1-2
Secure D from the rear using two long screws
(6 x 20 mm).
1-3
Remove the twist tie from the folded pedal cord.
Do not remove the twist tie that is located next to
the hole.
15cm
or
further in
3-1
F
3-2
15cm
E
or
further in
1
2
CAUTION
2.
2-1
2-2
Be extra careful to avoid pinching your fingers or dropping A.
Temporarily mount B.
CAUTION
Insert B between E and F as shown in the illustration.
Align and attach B to the front side of D, E and F.
2-1
2-2
F
B
Do not hold the keyboard in any position other than the position shown in the illustration.
4.
4-1
Secure A from the rear using two short screws
(6 x 16 mm).
4-2
Secure A from the rear using two thin screws
(4 x 14 mm).
4-3
Secure A from the front using four short screws
(6 x 16mm).
E
D
Secure A.
4-2
2-3
Temporarily secure B by finger-tightening four
long screws (6 x 20mm).
* Insert four screws into the larger holes (all four
holes) on the brackets.
2-4
Secure B using a thin screw (4 x 14 mm).
* Insert the screw into the smaller hole on the
bracket.
2-4
2-3
88
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
A
4-1
4-4
4-3
Firmly tighten the screws you temporarily
fastened on B in steps 2-3 above.
4-4
CLP-S308/S306: Keyboard Stand Assembly
5-1
5-2
Connect the speaker cord.
8.
Remove the twist tie attaching the speaker cord.
8-1
For models that feature a voltage selector: Set the
voltage selector to an appropriate voltage.
Insert the speaker cord plug into the connector
so that the protruding tab on the plug faces
toward right when viewed from the rear.
5-2
6.
Connect the power cord.
Connect the pedal cord.
6-1
Insert the pedal cord plug into the [PEDAL] connector.
6-2
Attach the cord holders to the instrument as
shown, then clip the cord into the holders. At this
time, be careful not to allow too much slack in
the pedal cord between the plug and cord holder.
Voltage Selector
Before connecting the AC power cord, check the setting
of the voltage selector which is provided in some
areas. To set the selector for 110V, 127V, 220V or 240V
main voltages, use a “minus” screwdriver to rotate the
selector dial so that the correct voltage for your region
appears next to the pointer on the panel. The voltage
selector is set at 240V when the unit is initially
shipped. After the proper voltage has been selected,
connect the AC power cord to the AC IN and an AC
wall outlet. A plug adaptor may be also provided in
some areas to match the pin configuration of the AC
wall outlets in your area.
ENGLISH
5.
WARNING
An improper voltage setting can cause serious damage to the
Clavinova or result in improper operation.
6-1
8-2
6-2
E
9.
Insert the AC power cord plug into the [AC IN]
connector.
Set the adjuster to secure the pedals.
Rotate the adjuster until the pedal box comes in
firm contact with the floor surface.
7.
Attach C.
7-1
Place on D, the stopper-wood in the bottom
corners of C, then attach the top of C.
7-2
Secure upper right and left of C using two thin
screws (4 x 14 mm).
7-3
Secure upper center and bottom of C using five
tapping screws (4 x 20 mm).
10.
Attach the headphone hanger.
Use the included two screws (4 x 10 mm) to
attach the hanger as shown in the illustration.
7-2
7-1
D
C
C
7-3
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
89
CLP-S308/S306: Keyboard Stand Assembly
After completing the assembly, please check the following.
• Are there any parts left over?
Review the assembly procedure and correct any
errors.
• Is the instrument clear of doors and other movable
fixtures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise when you
shake it?
Tighten all screws.
ENGLISH
• Does the pedal box rattle or give way when you step
on the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted securely into
the sockets?
Check the connection.
• If the unit creaks or is otherwise unsteady when you
play on the keyboard, refer to the assembly diagrams
and retighten all screws.
CAUTION
When moving the instrument after assembly, always hold the
bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper handling
can result in damage to the instrument or personal injury.
CAUTION
When transporting the instrument, cover the entire keyboard
with the protective sheet (page 87) before closing the key cover.
The sheet will protect the keyboard from being scratched.
Top portion
Key cover
Do not hold
here.
Hold here.
90
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Installing the Optional Floppy Disk Drive (CLP-370/340)
Installing the Optional Floppy Disk Drive
(CLP-370/340)
The optional UD-FD01 floppy disk drive can be installed to the bottom of the instrument by using
the included floppy disk drive case and screws.
ENGLISH
For the CLP-330 and CLP-S308/S306: The disk drive can be used with the instrument but cannot be
attached as described here. When using the floppy disk drive with these models, simply put the
drive on the top panel. Make sure to remove the connected disk cable before you close the key
cover.
Have a Phillips-head (+) screwdriver ready.
1.
Remove the three backing papers from
the adhesive tape in the case, and fit the
floppy disk drive into the case.
3.
Attach the drive and case assembly to the
left underside of the instrument, using the
included four screws (4mm x 10mm).
Insert the drive to the case, with the side having
the rubber stoppers facing the case.
4.
Connect the USB cable to the USB [TO
DEVICE] terminal.
Dual-sided adhesive tape
2.
Fold the USB cable inside the case as
shown.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
91
Preset Voice List
Preset Voice List
: Yes
: No
CLP-370/340
Voice Name
Stereo
Sampling
Touch
Response
Dynamic
Sampling*1
GRANDPIANO 1
ENGLISH
VARIATION
GRANDPIANO 2
VARIATION
E.PIANO 1
VARIATION
E.PIANO 2
VARIATION
HARPSICHORD
VARIATION
E. CLAVICHORD
VARIATION
VIBRAPHONE
VARIATION
CHURCH ORGAN
Voice Descriptions
Recorded samples from a full concert grand piano. Also
includes four levels of dynamic sampling, sustain samples,
and key-off samples for exceptionally realistic acoustic
grand piano sound. Perfect for classical compositions as
well as any other style that requires acoustic piano.
Warm and mellow piano. Good for classical compositions.
Spacious and clear piano with bright reverb. Good for popular music.
Bright, spacious piano. Good for popular or rock music.
An electronic piano sound created by FM synthesis.
Extremely “musical” response with varying timbre according
to keyboard dynamics. Good for standard popular music.
A synth-generated type electronic piano sound often heard
in popular music. Used in the DUAL mode it blends well with
an acoustic piano voice.
The sound of an electric piano using hammer-struck metallic
“tines.” Soft tone when played lightly, and an aggressive tone
when played hard.
A slightly different electric piano sound often heard in rock
and popular music.
The definitive instrument for baroque music. Since harpsichord uses plucked strings, there is no touch response.
There is, however, a characteristic additional sound when
the keys are released.
Mixes the same voice an octave higher for a more brilliant
tone.
A hammer-struck keyboard instrument that utilizes an electric pickup that is often heard in funk and soul music. Its tone
is noted for the unique sound produced when the keys are
released.
Includes a unique preset effect.
Vibraphone played with relatively soft mallets. The tone
becomes more metallic the harder you play.
Stereo-sampled, spacious, and realistic marimba.
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet).
Good for sacred music from the Baroque period.
VARIATION
This is the organ’s full coupler sound often associated with
Bach’s “Toccata and Fugue.”
JAZZ ORGAN
The sound of a “tonewheel” type electric organ. Often heard
in jazz and rock idioms.
VARIATION
Uses a rotary speaker effect with a different speed. The variations speed is faster. If the variation is selected while holding a chord, the speed of the effect will gradually change.
STRINGS
VARIATION
CHOIR
VARIATION
92
Key-Off
Sampling*2
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Stereo-sampled, large-scale strings ensemble with realistic
reverb. Try combining this voice with piano in the DUAL
mode.
Spacious strings ensemble with a slow attack. Try combining
this voice with a piano or electric piano in the DUAL mode.
A big, spacious choir voice. Perfect for creating rich harmonies in slow pieces.
A choir voice with a slow attack. Try combining this voice
with a piano or electric piano in the DUAL mode.
Preset Voice List
GUITAR
VARIATION
WOOD BASS
VARIATION
E.BASS
VARIATION
Stereo
Sampling
Touch
Response
Dynamic
Sampling*1
Key-Off
Sampling*2
Voice Descriptions
Warm and natural-sounding nylon guitar. Enjoy the quiet
ambience of nylon strings.
Bright, brilliant steel guitar. Suitable for popular music.
An upright bass played fingerstyle. Ideal for jazz and Latin
music.
Adds a cymbal voice to the bass sound. Ideal for walking
bass lines in jazz tunes.
Electric bass for a wide range of music styles, jazz, rock,
popular, and more.
A fretless bass good for styles such as jazz, fusion, etc.
*1. Dynamic Sampling provides multiple velocity-switched samples to accurately simulate the timbral response of
an acoustic instrument.
*2. Contains a very subtle sample that is produced when the keys are released.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
ENGLISH
Voice Name
93
Preset Voice List
: Yes
: No
CLP-330, CLP-S308/S306
ENGLISH
Voice Name
Stereo
Sampling
Touch
Response
Dynamic
Sampling*1
Key-Off
Sampling*2
Voice Descriptions
GRANDPIANO 1
Recorded samples from a full concert grand piano. Perfect
for classical compositions as well as any other style that
requires acoustic piano.
GRANDPIANO 2
Spacious and clear piano with bright reverb. Good for popular music.
E.PIANO 1
An electronic piano sound created by FM synthesis. Good
for standard popular music.
E.PIANO 2
The sound of an electric piano using hammer-struck metallic
“tines.” Soft tone when played lightly, and an aggressive tone
when played hard.
HARPSICHORD 1
The definitive instrument for baroque music. Since harpsichord uses plucked strings, there is no touch response.
There is, however, a characteristic additional sound when
the keys are released.
HARPSICHORD 2
Mixes the same voice an octave higher for a more brilliant
tone.
VIBRAPHONE
Vibraphone played with relatively soft mallets. The tone
becomes more metallic the harder you play.
CHURCH ORGAN 1
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet).
Good for sacred music from the Baroque period.
CHURCH ORGAN 2
This is the organ’s full coupler sound often associated with
Bach’s “Toccata and Fugue.”
JAZZ ORGAN
The sound of a “tonewheel” type electric organ. Often heard
in jazz and rock idioms.
STRINGS 1
Stereo-sampled, large-scale strings ensemble with realistic
reverb. Try combining this voice with piano in the DUAL
mode.
STRINGS 2
Spacious strings ensemble with a slow attack. Try combining
this voice with a piano or electric piano in the DUAL mode.
CHOIR
A big, spacious choir voice. Perfect for creating rich harmonies in slow pieces.
GUITAR
Warm and natural-sounding nylon guitar. Enjoy the quiet
ambience of nylon strings.
*1. Dynamic Sampling provides multiple velocity-switched samples to accurately simulate the timbral response of
an acoustic instrument.
*2. Contains a very subtle sample that is produced when the keys are released.
94
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Demo Song List
Demo Song List
: Included
: Not included
CLP-370/340
CLP-330,
CLP-S308/
S306
Title
GRAND PIANO1
Albumbard, Lyriske stykker
IV, op.47-2
HARPSICHORD
Concerto a cembalo obbligato,
2 violini, viola e continuo
No.7, BWV.1058
HARPSICHORD1
HARPSICHORD2
Gigue, Französische Suiten
Nr.5, BWV.816
CHURCH ORGAN
CHURCH ORGAN1
Herr Christ, der ein’ge GottesSohn, BWV.601
CHURCH ORGAN2
Triosonate Nr.6, BWV.530
Composer
E. H. Grieg
J. S. Bach
ENGLISH
Voice Name
The demonstration pieces listed above are short rearranged excerpts of the original compositions.
All other songs are original (©2008 Yamaha Corporation).
Piano Voice Demo Description (CLP-370/340)
Voice Name
Piano Voice Demo
GRAND PIANO1
Stereo sampling
GRAND PIANO2
Monaural sampling
E.PIANO1
With sustain sampling
E.PIANO2
Without sustain sampling
HARPSICHORD
With key-off sampling
E.CLAVICHORD
Without key-off sampling
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
95
Index
Index
Numerics
50 greats for the Piano .....................................................17
50 Piano Preset Songs ......................................................17
A
ENGLISH
A-B Repeat .......................................................................19
Adjust
Tempo (50 Piano Preset Songs) ...............................17
Tempo (Recorded Songs) .........................................44
Volume (50 Piano Preset Songs) ..............................17
Volume (Metronome) ..............................................67
ALL (LED display) .....................................................17, 45
Assembly ..........................................................................81
Equal Temperament ........................................................ 63
Export .............................................................................. 36
F
Factory Setting List .......................................................... 98
[FILE] button .................................................................. 37
Fine Tuning of the Pitch ................................................. 62
Floppy Disk Drive ........................................................... 42
Installation................................................................. 91
Format ................................................................. 40, 41, 42
Function........................................................................... 62
Basic Procedure......................................................... 60
Parameter List ........................................................... 59
AUX IN [L/L+R][R] jacks ...............................................72
AUX OUT [L/L+R][R] jacks...........................................71
H
Half-pedal ........................................................................ 21
B
Hz (Hertz) ....................................................................... 62
Backup (Data) ..................................................................78
Backup Functions ............................................................70
I
[BRILLIANCE] button ....................................................22
Internet Direct Connection ............................................ 46
Internet Settings .............................................................. 49
C
Internet song.................................................................... 56
Character Code ................................................................70
Combining Two Voices (Dual mode) ............................26
K
Connecting a Personal Computer.......................75, 76, 77
Key Cover ........................................................................ 12
Connection to a USB storage device ...............................73
Keyboard Stand ............................................................... 81
Connections .....................................................................71
Computer.......................................................75, 76, 77
USB storage device ....................................................73
Keyoff Sample Volume ................................................... 66
Connectors .......................................................................71
L
D
LAN Port driver ............................................................... 53
Damper Pedal ..................................................................21
[LAN] terminal................................................................ 72
Damper Pedal Range .......................................................65
[LEFT] button ........................................................... 18, 33
[DAMPER RES.] button .................................................23
Left Pedal ......................................................................... 21
Damper Resonance ..........................................................23
Left Pedal Mode............................................................... 66
Delete ...............................................................................39
Demonstration Tunes .....................................................16
List
Factory Setting........................................................... 98
Functions ................................................................... 59
Preset Voice ............................................................... 94
Display .............................................................................14
Load ..................................................................... 36, 38, 45
[DEMO] button...............................................................16
Demo Song List................................................................95
Kirnberger........................................................................ 63
LAN Settings .............................................................. 49, 70
Dual mode .................................................................26, 64
M
96
E
[MASTER VOLUME] slider ........................................... 15
[EFFECT] button.......................................................22, 23
Mean Tone....................................................................... 63
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Index
Message List .....................................................................79
[SELECT] switch ............................................................. 73
Metronome ......................................................................29
SMF (Standard MIDI File).............................................. 36
METRONOME [ON/OFF] button ...........................67, 29
Soft Pedal ................................................................... 21, 66
Metronome Volume ........................................................67
Soft Pedal Effect Depth ................................................... 66
MIDI ................................................................................72
Song ................................................................................. 17
MIDI Functions ...............................................................67
SONG [PLAY/PAUSE] button ........................... 16, 17, 44
MIDI [IN] [OUT] [THRU] terminals ............................72
[SONG SELECT] button .......................................... 17, 44
Music Braces (CLP-370/340) ..........................................14
SONG [STOP] button............................................... 17, 44
Music Rest ........................................................................13
[SPEAKER] switch .......................................................... 15
Musicsoft Downloader ....................................................78
Specifications ................................................................. 100
[SPLIT] button ................................................................ 27
Normal setting .................................................................22
Split mode .................................................................. 27, 65
Split Point .................................................................. 27, 65
P
Part Cancel .......................................................................18
Part Playback On and Off................................................45
[PEDAL] jack ...................................................................83
Pedal Play/Pause ..............................................................45
Sustain Sample Depth ..................................................... 66
Sync (Synchronized) ....................................................... 45
ENGLISH
SPLIT (CLP-370/340) (Function) .................................. 65
N
Sync Start ......................................................................... 18
T
Pedals ...............................................................................21
[TEMPO/FUNCTION] button ................................ 29, 60
[PHONES] jacks ..............................................................15
[TOUCH] button ............................................................ 24
Piano Voice Demo Description ......................................95
Touch Sensitivity ............................................................. 24
[PLAY/PAUSE] button..............................................16, 17
Transporting ...................................................................... 6
Play/Pause playback
Useful Playback Functions........................................45
[TRANSPOSE] button .................................................... 25
Playing Back Songs ....................................................43, 44
Troubleshooting .............................................................. 80
Transposition .................................................................. 25
[POWER] switch .............................................................14
Practicing a One-Hand Part Using the 50 Preset Songs.18
U
Preset Song .......................................................................17
USB Storage Device ................................................... 40, 73
Preset Voice List.........................................................92, 94
USB [TO DEVICE] terminal .................................... 72, 73
Program version number ................................................53
USB [TO HOST] terminal ........................................ 72, 75
Pure Major .......................................................................63
USB-LAN Adapter........................................................... 54
Pure Minor.......................................................................63
Pythagorean .....................................................................63
R
V
[VARIATION] button .................................................... 22
Voice ................................................................................ 20
[REC] button ...................................................................31
Voice group buttons........................................................ 20
Recording .........................................................................30
Initial Settings............................................................35
RIGHT/LEFT parts....................................................33
W
Re-recording ..............................................................32, 34
Werckmeister................................................................... 63
[REVERB] button ............................................................22
[RIGHT] button ........................................................18, 33
Right Pedal .......................................................................21
rnd (LED display) ......................................................17, 45
S
Save.............................................................................36, 37
Scale..................................................................................63
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
97
Appendix
Factory Setting List / Liste der Vorgabeeinstellungen /
Liste des réglages / Lista de ajustes de fábrica
Backup Group
Default
Voice
Variation (CLP-370/340)
F7.1
OFF
—
OFF
Split Mode (CLP-370/340)
OFF
F8.1
NORMAL
Reverb Type
Preset for each voice
Reverb Depth
Preset for each voice
Effect Type
Preset for each voice
Effect Depth
Preset for each voice
Touch Sensitivity
F7.1
—
WOOD BASS
Brilliance
CLP-330,
CLP-S308/
S306
GRAND PIANO 1
Dual Mode
Split Mode Left Voice (CLP-370/340)
CLP-370/
340
F8.4
F7.4
F8.1
F7.1
MEDIUM
Volume in the FIXED Mode
64
DAMPER RES.
ON
F8.4
—
6
F8.4
—
DAMPER RES. Depth
Metronome
Metronome Time Signature
OFF
—
—
0 (no accent)
—
—
Tempo
Transpose
120
—
—
0
F8.3
F7.3
Function
CLP-370/
340
Function
Default
F1
F1
Tuning
A3=440Hz
F2.1
F2.1
Scale
1 (Equal Temperament)
F2.2
F2.2
Base Note
C
F3.1
F3.1
Dual Balance
Preset for each voice combination
F3.2
F3.2
Dual Detune
Preset for each voice combination
F3.3, F3.4
F3.3, F3.4
Dual Octave Shift
Preset for each voice combination
F3.5, F.3.6
F3.5, F.3.6
Dual Effect Depth
F4.1
—
Split Point
Preset for each voice combination
F2
F4.2
—
Split Balance
Preset for each voice combination
F4.3, F4.4
—
Split Octave Shift
Preset for each voice combination
F4.5, F4.6
—
Split Effect Depth
Preset for each voice combination
F4.7
—
F5.1
F4.1
F5.2
F4.2
F5.3
—
F5.4
98
Backup Group
CLP-330,
CLP-S308/
S306
—
Damper Pedal Range
ALL
Left Pedal Mode
1 (Soft Pedal)
Soft Pedal Effect Depth
3
Sustain Sample Depth
12
Keyoff Sample Volume
10
F5.5
F4.3
Song Channel Selection
ALL
F6
F5
Metronome Volume
10
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
CLP-370/
340
CLP-330,
CLP-S308/
S306
F8.3
F7.3
F8.1
F7.1
F8.4
F7.4
F8.1
F7.1
CLP-370/
340
Backup Group
CLP-330,
CLP-S308/
S306
Function
Default
F7.1
F6.1
MIDI Transmit Channel
1
F7.2
F6.2
MIDI Receive Channel
ALL
F7.3
F6.3
Local Control
ON
F7.4
F6.4
Program Change Send &
Receive
ON
F7.5
F6.5
Control Change Send &
Receive
ON
F8
F7
Backup
Voice: OFF
MIDI – Others: ON
F8.5
F7.5
Character Code
Int
CLP-370/
340
CLP-330,
CLP-S308/
S306
F8.2
F7.2
Always backed up
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
99
Specifications / Technische Daten /
Caractéristiques techniques / Especificaciones
CLP-370
Size /
Weight
CLP-340
CLP-330
CLP-S308
Width
1408 mm (55-7/16")
1449 mm (57-1/16")
Height
[For models with
polished finish]
917 mm (36-1/8")
[920 mm (36-1/4")]
[977 mm (38-7/16")]
Height with music
rest
[For models with
polished finish]
Depth
Weight
[For models with
polished finish]
1018 mm (40-1/16")
[1019 mm (40-1/8")]
511mm (20-1/8")
1019 mm (40-1/8")
[1021 mm (40-3/16")]
—
514mm (20-1/4")
430 mm (16-15/16")
78 kg (171lbs., 15 oz.) 69 kg (152lbs., 2 oz.) 65 kg (143lbs., 5 oz.)
[81 kg (178lbs., 9 oz.)] [71 kg (156lbs., 8 oz.)] [68 kg (149lbs., 15 oz.)]
Number of Keys
[78 kg (171lbs., 15 oz.)]
88
NW
Keyboard Type
Control
Interface
NW
(Natural Wood)
with
Synthetic ivory
keytops
(Wood is used for the
white keys)
GH3
(Graded Hammer 3)
with Synthetic ivory
keytops
Number of Pedal
3
7-Segment LED
Sliding
Music Rest
Yes
—
AWM Dynamic Stereo Sampling
Stereo Sustain
Samples
Yes
—
Key-off Samples
Yes
—
Number of Polyphony
(Max.)
128
14 x 2
variations
14
Reverb
4 types
Brilliance
5 types
Chorus
Yes
Dual
Yes
Split
100
Folding
Yes
Tone Generation
Technology
Number of Voices
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
GH3
(Graded Hammer 3)
with Synthetic ivory
keytops
Damper (with half-pedal effect), Sostenuto, Soft
Key Cover Style
Music Clips
(Natural Wood)
with
Synthetic ivory
keytops
(Wood is used for
the white keys)
Yes
Display
Effect
(Graded Hammer 3)
Yes
Pedal Functions
Voices
GH3
Touch Sensitivity
Half Pedal
Cabinet
CLP-S306
Yes
—
CLP-370
CLP-340
CLP-330
Number of Preset
Songs
Songs
Recording
Compatible
Data
Format
Number
of Songs
3
Number
of Tracks
2
Data
Capacity
User songs (100KB X 3 (ca.11,000 notes X 3)),
External songs (447KB)
Playback
SMF (Format 0 & 1)
Recording
SMF (Format 0)
Yes
Tempo Range
32-280
Transpose
-12 to 0, 0 to +12
Tuning
Storage
Yes
Scale Type
7 types
Floppy Disk Drive
Optional
Internal Memory
User songs 300KB, External songs 447KB
External Device
Optional
Headphones
x2
MIDI
Connectivity
[IN][OUT][THRU]
AUX IN
[L/L+R][R]
AUX OUT
[L/L+R][R]
x2
(selectable)
USB [TO DEVICE]
x1
USB [TO HOST]
Yes
Yes
—
Yes
Amplifiers
40W x 2
20W x 2
40W x 2
Speakers
(16cm + 5cm) x 2
16cm x 2
(16cm + 5cm) x 2
[LAN]
Amplifiers/
Speakers
Speaker Boxes
Bundled
Software
CLP-S306
50
Metronome
Functions
CLP-S308
Yes
Yes
—
CD-ROM
Yes
Accessories Included Accessories
Owner’s Manual, Accessory CD-ROM for Windows,
Accessory CD-ROM for Windows Installation Guide,
“50 greats for the Piano” Score Collection,
My Yamaha Product User Registration,
Bench (included or optional depending on locale)
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify
products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please
check with your Yamaha dealer.
* Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich das Recht vor,
Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da die technischen Daten, das
Gerät selbst bitte mit Ihrem Yamaha-Händler in Verbindung.
* Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se réserve le droit de
changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fait que les caractéristiques techniques, les
équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur Yamaha le plus proche.
* Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha Corp. se reserva el
derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin previo aviso. Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información a su distribuidor Yamaha.
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
101
MEMO
102
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
MEMO
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
103
MEMO
104
CLP-370/340/330, CLP-S308/S306 Owner’s Manual
Explanation of Graphical Symbols
CAUT I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
The above warning is located on the bottom of the unit.
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(UL60065_03)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your
FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable
level of assurance that your use of this product in a
residential environment will not result in harmful interference with other electronic devices. This equipment
generates/uses radio frequencies and, if not installed
and used according to the instructions found in the
users manual, may cause interference harmful to the
operation of
other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur
in all installations. If this product is found to be the
source of interference, which can be determined by turning the unit “OFF” and “ON,” please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Corporation
of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE
: NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured makings
identifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN must be connected
to the terminal which is marked with the letter L or
coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
• This applies only to products distributed by
Yamaha Music U.K. Ltd.
(2 wires)
(class B)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park,
Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Piano
Model Name : CLP-370/340/330, CLP-S308PE/
S306PE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See user manual instructions if interference to radio reception
is suspected.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
NORTH AMERICA
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
Para detalles sobre productos, contacte su tienda Yamaha más cercana
o el distribuidor autorizado que se lista debajo.
THE NETHERLANDS/
BELGIUM/LUXEMBOURG
Yamaha Music Central Europe GmbH,
Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
FRANCE
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
CENTRAL & SOUTH AMERICA
MEXICO
Yamaha de México S.A. de C.V.
Calz. Javier Rojo Gómez #1149,
Col. Guadalupe del Moral
C.P. 09300, México, D.F., México
Tel: 55-5804-0600
BRAZIL
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha Música Ibérica, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,
CEP 04534-013 Sao Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Olga Cossettini 1553, Piso 4 Norte
Madero Este-C1107CEK
Buenos Aires, Argentina
Tel: 011-4119-7000
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
EUROPE
THE UNITED KINGDOM
Yamaha Music U.K. Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
IRELAND
Danfay Ltd.
61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin
Tel: 01-2859177
GERMANY
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH,
Branch Switzerland
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Central Europe GmbH,
Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/SLOVAKIA/
HUNGARY/SLOVENIA
Yamaha Music Central Europe GmbH,
Branch Austria, CEE Department
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-602039025
POLAND
Yamaha Music Central Europe GmbH
Sp.z. o.o. Oddzial w Polsce
ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland
Tel: 022-868-07-57
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1, Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 6A, DK-2730 Herlev, Denmark
Tel: 44 92 49 00
ASIA
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
25/F., United Plaza, 1468 Nanjing Road (West),
Jingan, Shanghai, China
Tel: 021-6247-2211
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 080-004-0022
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-78030900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
FINLAND
Yamaha Music Asia Pte., Ltd.
#03-11 A-Z Building
140 Paya Lebor Road, Singapore 409015
Tel: 747-4374
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
TAIWAN
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1, N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland
Tel: 525 5000
RUSSIA
Yamaha Music (Russia)
Office 4015, entrance 2, 21/5 Kuznetskii
Most street, Moscow, 107996, Russia
Tel: 495 626 0660
OTHER EUROPEAN COUNTRIES
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
AFRICA
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
MIDDLE EAST
TURKEY/CYPRUS
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LOB 16-513, P.O.Box 17328, Jubel Ali,
Dubai, United Arab Emirates
Tel: +971-4-881-5868
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
4, 6, 15 and 16th floor, Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: 02-215-2626
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
OCEANIA
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
EKB45
DIC 2164
Yamaha Home Keyboards Home Page
http://music.yamaha.com/homekeyboard/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2008 Yamaha Corporation
WN75950 109MWAP*.*-**B1
Printed in China