advertisement
StorConn GUI User’s Manual
User’s Manual
Notice
Product features and specifications described in this manual are subject to change without notice.
The manufacturer shall not be liable for any damage, or for the loss of information resulting from the performance or use of the information contained herein.
Trademarks
Accusys and the names of Accusys products and logos referenced herein are trademarks and/or service marks or registered trademarks and/or service marks of Accusys, Inc.
Microsoft, Windows, Windows NT, MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation. Intel and Pentium are registered trademarks of Intel Corporation. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners.
All contents of this manual are copyrighted by Accusys, Inc.
The information contained herein is the exclusive property of Accusys, Inc. and shall not be copied, transferred, photocopied, translated on paper, film, electronic media, or computer-readable form, or otherwise reproduced in any way, without the express written permission of Accusys Inc.
Manual version is 1.2
© Copyright 2008 Accusys, Inc.
All rights reserved. http://www.accusys.com.tw
1
User’s Manual
About this manual
Congratulations on your selection of the StorConn GUI (graphical user interface). StorConn supports web-based real time local or remote monitoring of a RAID. It is designed to be used in conjunction with Accusys DeskRAID/InneRAID linked to each host. This manual covers all the information in detail.
Intended user
This manual is designed and written for users installing and using StorConn. The intended user should have working knowledge of RAID planning and data storage.
Organization of the manual
Chapter 1: Introduction to StorConn provides details of key features, checklists of requirements and pre-installation assumptions.
Chapter 2: Setting up StorConn in Windows guides users through the entire setup process. In addition to installation of the GUI, this chapter explains how to view the history log.
Chapter 3: Setting up StorConn in Mac OS guides Mac users through the entire setup process. In addition to installation of the GUI, this chapter explains how to view the history log and configure email alert settings. Users of other operating systems should skip this chapter.
Chapter 4: Setting up StorConn in Linux guides Linux users through the entire setup process. In addition to installation of the GUI, this chapter explains how to view the history log and configure email alert settings. Users of other operating systems should skip this chapter.
Chapter 5: Trouble shooting lists all of event messages and the possible solution for trouble shooting during using StorConn.
Appendix C: Contact Accusys lists contact details of Accusys business units around the world.
Guide to conventions
Important information that users should be aware of is indicated with the following icons:
Caution
This icon indicates the existence of a potential hazard that could result in personal injury, damage to your equipment or loss of data if the safety instruction is not observed
Note
This icon indicates useful tips on getting the most from your
RAID controller. http://www.accusys.com.tw
2
User’s Manual
N OTICE 1
T RADEMARKS ......................................................................................................................................................1
A BOUT THIS MANUAL ...........................................................................................................................................2
G UIDE TO CONVENTIONS ......................................................................................................................................2
1. INTRODUCTION TO STORCONN ................................................................................................5
1.1.
K EY FEATURES ..............................................................................................................................................5
GUI...................................................................................................................................................5
Multi-interface..................................................................................................................................5
Remote monitoring ...........................................................................................................................5
Event notification..............................................................................................................................5
1.2.
O PERATING SYSTEMS SUPPORTED LIST ..........................................................................................................6
1.3.
I NSTALLATION PREREQUISITES ......................................................................................................................6
Hardware requirements ....................................................................................................................6
Software requirements ......................................................................................................................6
Assumptions......................................................................................................................................6
2. SETTING UP STORCONN IN WINDOWS ....................................................................................7
2.1.
I NSTALLATION FLOWCHART ...........................................................................................................................7
2.2.
S OFTWARE I NSTALLATION .............................................................................................................................8
2.3.
C ONFIGURE S TOR C ONN ................................................................................................................................9
2.3.1. Menu options: .......................................................................................................................10
2.4.
M ONITORING RAID STATUS WITH S TOR C ONN ............................................................................................13
2.4.1.
R EMOTELY MONITOR S TOR C ONN .............................................................................................13
2.5.
M ANAGEMENT ............................................................................................................................................14
2.5.1.
RAID CAPACITY EXPANSION AND LEVEL MIGRATION ..................................................................14
2.5.2.
RAID C ONFIGURATION ...........................................................................................................15
2.5.3.
E NVIRONMENT INFO ................................................................................................................16
2.6.
U NINSTALL S TOR C ONN ...............................................................................................................................17
3. SETTING UP STORCONN ON MAC ...........................................................................................18
3.1.
I NSTALLATION FLOWCHART .........................................................................................................................18
3.2.
S OFTWARE INSTALLATION ...........................................................................................................................19
3.3.
L AUNCHING S TOR C ONN S ERVER ................................................................................................................21
3.4.
R EMOTELY ACCESSING S TOR C ONN .............................................................................................................22
4. SETTING UP STORCONN IN LINUX..........................................................................................24
4.1.
I NSTALLATION FLOWCHART .........................................................................................................................24
4.2.
S OFTWARE I NSTALLATION ...........................................................................................................................25
4.3.
L AUNCHING S TOR C ONN S ERVER ................................................................................................................27
http://www.accusys.com.tw
3
User’s Manual
4.4.
R EMOTELY ACCESSING S TOR C ONN .............................................................................................................28
5. TROUBLE SHOOTING ..................................................................................................................30
6. CONTACT ACCUSYS.....................................................................................................................33
A CCUSYS , I NC ....................................................................................................................................................33
A CCUSYS U.S.A., I NC . .......................................................................................................................................33
A CCUSYS C HINA , I NC . .......................................................................................................................................33
A CCUSYS EU B.V ..............................................................................................................................................34
A CCUSYS K OREA , I NC . ......................................................................................................................................34
http://www.accusys.com.tw
4
1. Introduction to StorConn
User’s Manual
This chapter introduces the features and capabilities of StorConn.
You will find:
1.1. Key features: Details of key features
1.2. Operating systems supported list: A checklist of operating systems supported
1.3. Installation prerequisites: A checklist of pre-installation assumptions
1.1. Key features
StorConn is designed to be used in conjunction with Accusys DeskRAID/InneRAID.
Supports up to four RAID boxes per host z Graphical User Interface (GUI) z Fault tolerant z Multi-platform and Operating System support z Multi-interface support z Remote monitoring z Web-based environment z Event notification
GUI
The graphical user interface enables easy monitoring of the status of a RAID in an intuitive graphical format.
Multi-interface
StorConn support in-band (SATA) and out-band (RS-232) connection.
Remote monitoring
StorConn can be accessed from any web-enabled terminal.
Event notification
Email and popup-window event notification keeps the administrator informed of the status of the RAID box. http://www.accusys.com.tw
5
1.2. Operating systems supported list
z Windows 2000 z Windows XP z Windows 2003 z Windows Vista z Windows 2008 z Mac OSX z Linux Fedora/Red hat
User’s Manual
1.3. Installation prerequisites
StorConn is designed to be used in conjunction with Accusys DeskRAID/InneRAID (up to four RAID boxes per host). Users require the following:
Hardware requirements
z Accusys DeskRAID/InneRAID
DeskRAID: ACS-77100, ACS-77101, ACS-77110, ACS-77111, ACS-78100
InneRAID: InneRAID Slim, InneRAID Duo, InneRAID Pro, ACS-75170, ACS-76130 z RS232 cable backup connection from RAID box to host computer (optional) z Monitor display resolution of 800 x 600 (recommended)
Software requirements
z StorConn GUI program (Download from Accusys website: http://www.accusys.com.tw) z Supported operating system z Java-enabled web browser
Assumptions
Before the RAID and StorConn can be used, you must: z Connect the RAID box to your computer. z Install StorConn on your host computer. z Initialize the array. z These steps are described in detail in the RAID box User’s Manual. http://www.accusys.com.tw
6
2. Setting up StorConn in Windows
User’s Manual
This chapter details the installation, setup and configuration process for StorConn on a
Windows XP/2000/2003/Vista/2008 operating system. The screens shown are taken from
Windows XP.
.
2.1. Installation flowchart
The set up process follows these steps:
Install
StorConn
. z Install StorConn.
Configure
StorConn z Launch StorConn. z Configure mail alert settings.
Remotely access
StorConn z Install web server software on the host machine. z Obtain your IP address. (if you do not already have it) z Make StorConn to be the default website on the host machine. http://www.accusys.com.tw
7
2.2. Software Installation
User’s Manual
Install StorConn
The StorConn program can be downloaded from http://www.accusys.com.tw. The below steps will guide you to install the program.
1. Double click the Setup.exe file to start to install StorConn. The Welcome dialog box will appear.
2. Click Next to continue with the setup.
3. Read the license agreement carefully.
Select Agree if you accept the terms of the agreement to continue the setup.
4. The setup program will install StorConn to the default location as C:\Program
Files\StorConn. To install to a different location, either type in the new path or click Change and select a new location.
5. Once you have confirmed the setup location, click Next to continue.
6. The setup program will add shortcut icons to the default folder as “StorConn”.
If you do not want to use the default folder, you can either type a new name, or select an existing folder from the list.
7. Once you have confirmed the shortcut icon location, click Next to continue.
Installation will commence.
8. You will be prompted to Click Finish to complete the setup. http://www.accusys.com.tw
8
9. Two shortcut icons will be created on desktop after software installation.
StorConn Server is to launch StorConn
GUI program.
Monitor Window is to open StorConn monitor window.
User’s Manual
2.3. Configure StorConn
1. To launch StorConn Server, go to Start > Programs > StorConn> StorConnServer.
2. The Detect Option dialog box will appear prompting you to scan the RAID box. StorConn supports in-band and out-band connection. Select “No” for not detect COM port device if you want to use in-band connection.
Note
StorConn Server can obtain RAID system information through the SATA connection or through the RS232 (COM port) connection. The program always checks first for the SATA connection, then the RS232 connection. If both connections are present, COM port is used.
1. RAID detection will commence to obtain information from the RAID box via SATA or RS232.
The Detect Process dialog box shows the progress of the system’s detection of RAID box. http://www.accusys.com.tw
9
2. Once the scan is finished, The StorConn RAID
Information dialog box appears. This identifies the properties of the RAID box detected and its current status.
RAID information includes:
Serial Number: the serial number of the RAID box.
Product ID: the product ID of the RAID box.
Type: the port that StorConn program uses to communicate with the RAID box.
Port: specifying the port detected.
Baud Rate: the number of times per second a signal in a communications channel changes, or makes a transition between states (for COM port only).
After confirming the information, click OK to exit.
3. The StorConn server icon appears on the task bar at the bottom right of the desktop. You can single click right bottom for option menu.
User’s Manual
Menu options:
Run at Windows startup
Allows StorConn to execute automatically when Windows startup. (Default is unexecuted)
Enable / disable warning message
Allows StorConn Server to pop up warning message window when event occur (Default is disable) http://www.accusys.com.tw
10
User’s Manual
Configure Setup
Configure mail alert setting. The mail alert settings should be configured so that, in the event of a RAID failure, the RAID administrator will be notified at once. The mail alert settings allow this to be done via email, so the administrator can passively monitor RAID status from anywhere, without having to keep monitoring StorConn.
The steps below will guide you to configure the mail alert settings:
1. Click Config.Setup. The System
Configuration Setup dialog box will open.
2. Enter the following values:
Mail Server: Enter the host name of the mail server in your network or its FQDN (e.g. accusys.com.tw). If no Mail Server information is added, the mail alert function will be disabled.
IP Address: Enter the IP address of the mail server in your network or its FQDN (Entries in the top two fields should be identical)
Administrator’s Emails: Enter email addresses for two administrators.
Delay Time (Minute): If a RAID failure occurs, an alert email will be sent immediately to each of the email addresses entered in the above field. Alert emails will continue to be sent until the problem is resolved. The Email will notify events which are disk status (off line, fails, rebuilding, rebuild OK, have bad sector, SMART warning) and RAID fails. Also enclosure events, fan fail, temperature fail, battery abnormal (ACS-75170, ACS-75200, ACS-76130 and ACS-76200 only) and power abnormal (ACS-78100 only)
Enter here the desired time lapse between successive emails (minimum = 1 minute)
Web Server Port: You can input any figure between 1 and 65535
3. Click Save to save the new configuration.
History log
View the history log. All malfunctions and events triggering an alert email are recorded in the history log. Select the History Log menu can view the log of error message. http://www.accusys.com.tw
11
Open monitor window
User’s Manual
Monitor your RAID box with StorConn. Click this option to open the monitor window on local computer. The StorConn browser window displays the following information:
1. RAID box tab: Allow customer to select which RAID to monitor.
2. RAID box information: Lists model name, serial number and current RAID level.
3. Disk status: Allows you to monitor the status of each of the disk drives.
4. Disk information: Lists model name, capacity of each of the disk drives and disk
remap number (this function will support RAID level 5 of all products, but now it only
support ACS-76130 ). If the disk remap exceeds ten times, it will reveal with red. The controller can support disk remap is 15.
5. Re-build / initialize progress: Tracks the re-building or initialization process.
6. Fan Status: Display the status of fan.
7. Thermometer status: Display the status of system thermometer.
8. Message window: Provides RAID box number, date, time, message when event occur.
9. Read SMART data of disk: Allow customer to read SMART states of disk. (Click disk icon,
SMART information of the disk will display on the screen)
Open Web Server
Allow you to monitor the status of your remotely RAID in real time. (Default is unexecuted) http://www.accusys.com.tw
12
2.4. Monitoring RAID status with StorConn
User’s Manual
The StorConn browser allows you to remotely monitor the status of your RAID in real time.
2.4.1. Remotely monitor StorConn
Open a browser on an Internet-connected computer.
Enter the url http://ip:web server port where ip is the IP address determined in Installing
StorConn above, web server port is the System Configuration Setup.
Note
Java Runtime Environment must be installed for StorConn to be successfully displayed on a browser and JRE version must be
5.0 or later. If JRE is not already installed, the application can be downloaded free from http://java.sun.com/downloads/
The StorConn browser window displays the following information:
1. RAID box tab: Allow customer to select which RAID to monitor.
2. RAID box information: Lists model name, serial number and current RAID level.
3. Disk status: Allows you to monitor the status of each of the disk drives.
4. Disk information: Lists model name and capacity of each of the disk drives.
5. Re-build / initialize progress: Tracks the re-building or initialization process.
6. Fan Status: Display the status of fan. http://www.accusys.com.tw
13
7. Thermometer status: Display the status of system thermometer.
User’s Manual
8. Message window: Provides RAID box number, date, time, message when event occur.
9. Read SMART data of disk: Allow customer to read SMART states of disk. (Click disk icon,
SMART information of the disk will display on the screen)
2.5. Management
The StorConn support RAID capacity expansion and level migration (76200 only) and allows you to do RAID configuration and display the environment info. (Only for ACS-78100)
2.5.1 RAID capacity expansion and level migration
1. Click Expand Setting form Monitor
Windows and the Expansion dialog box pops out on the screen.
2. Adjust the following settings:
Manual Setting: a. Allow you to select which available RAID level that you want to change.
b. Click OK to process the RAID expansion.
3.
Please follow the steps of Message to let
Array expand effective
Note
Controller will scan the spare disk before start expanding to make sure the drive is healthy, if the spare disk has bad sector, it will be kicked off. http://www.accusys.com.tw
14
User’s Manual
Caution
During the expansion process, please don’t turn off the system or pull out disk.
Note
If set up the state of the disk into a Dynamic disk, the expand function only can be use in 2R0 to R5.
2.5.2 RAID Configuration
1. Click Configuration form Monitor Windows and the Enter Password dialog box pops out on the screen.
2. You will be prompted to enter the
Password. The default password is 0000
(four zeros). Click Ok, the Configure
Setting dialog box will appear.
3. Configure Setting include Quick Setup
RAID and Change password.
2.5.2.1 Quick Setup RAID
1. Click Quick Setup RAID and the RAID level setting dialog box will appear.
Current RAID level : RAID level at present
Current controller no : RAID Box number
Select stripe size : stripe size at present
Supported RAID Level : Display which RAID
level you can select.
Click OK to process the Quick Setup RAID. http://www.accusys.com.tw
15
2. Please shutdown host to let new RAID can be created.
Two ways can be shutdown the host.
3. If you select “Yes”, the host will shut down automatically in 15 seconds.
4. Please operate according to the content of message to let array effective
5. If you select “No” to shutdown the host by manual. Please follow the steps of
Message to let Array effective.
2.5.2.2 Change password
1. Click Change password and the Change
PassWord dialog box pops out on the screen.
2. Key in New password, then click OK. (the password limit four word)
3. You will be prompted to Click Ok and restart GUI program to complete the change password.
2.5.3 Environment info:
1. Click Environment Info form Monitor
Windows and the environment info of
RAID will display on the screen.
Environment info has included fan, temperature, and voltage states. The revealing value is blue under the normal condition, otherwise reveal is red http://www.accusys.com.tw
User’s Manual
16
2.6 Uninstall StorConn
User’s Manual
This section details the software un-installation process for StorConn on a Windows
XP/2000/2003 operating system. The screens shown are taken from Windows XP.
The steps below will guide you to uninstall StorConn Server in Windows:
1. Go to Start > Programs >StorConn> Uninstall StorConn
2. The uninstaller dialog box will appear, chick Next to continue.
3. You will be prompted to Click Finish to complete the un-installation and exit. http://www.accusys.com.tw
17
3. Setting up StorConn on Mac
User’s Manual
This chapter details the software installation, setup and configuration process for
StorConn on a Mac operating system. The screens shown are taken from Mac Pro.
3.1Installation flowchart
The set up process follows these steps:
Install
StorConn z In a Mac OS X Server environment there is no need to first install a Web Server. You can begin installing StorConn right away. z The Installation procedure of StorConn in Mac OS X Server and workstation are the same.
Configure
StorConn alerts z The administrator must enter an email address to which alert emails will be sent automatically in the event of malfunction.
Launch
StorConn z The history log displays error messages. z Once these set-up steps are completed, you are ready to access StorConn. http://www.accusys.com.tw
18
Software installation
Follow the steps below to install StorConn on a Mac OS X operating system.
1. Insert the GUI program CD-ROM that delivered with RAID box package.
User’s Manual
2. Extract Mac_StorConn.pkg.zip from CD-ROM to Desktop or a directory prefer.
3. Click on Mac_StorConn.pkg to begin installation of the StorConn GUI program on Mac system.
4. Choose the drive that you want to install the program and Click on
Continue to next step. http://www.accusys.com.tw
19
5. Configuring mail alert settings.
Before installing StorConn, you must set the mail alert values. In the event of a RAID malfunction, an alert email will be sent to the
RAID administrator at a specified address.
6. Enter the following values:
Mail Server:
Enter the IP address of the mail server in your network
Sender: Enter an email address to identify the source of the alert email
Receiver: Enter up to three e-mail addresses to which an email will be sent. Please add semicolon between mail address.
Notify time (minutes): Enter the interval time between successive alert email dispatches (minimum value: 1 / maximum value:
65536)
COM Port 1~4:
Mac users should keep the default setting
.
7. After fill up the above information, click on Save to go to next step.
8. Click on Close to complete the installation.
User’s Manual http://www.accusys.com.tw
20
Launching StorConn Server
1. Find and access into the /Application folder.
2. Find StartGUI and click on it to run the program.
User’s Manual
3. As the StorConn launches, the program will automatically scan for RAID box connected. A response similar to that beside should appear. Once the scan is completed, details of the Accusys RAID subsystems found will be listed. You will be asked Accept?!!<y\n>. If all controllers have been located, type y.
4. You can check if the server activate by typing command ps http://www.accusys.com.tw
21
Remotely accessing StorConn
User’s Manual
Note
Java Runtime Environment must be installed for StorConn to be successfully displayed on a browser and JRE version must be
5.0 or later. If JRE is not already installed, the application can be downloaded free from http://java.sun.com/downloads/
1. Open a browser on an
Internet-connected computer.
Enter the URL http://ip:3128/ where the IP is the IP address of the host machine and the port number is fixed at
3128.
The browser will automatically display the StorConn interface. Turn to Chapter
6 Monitoring with StorConn to learn about its capabilities. http://www.accusys.com.tw
22
User’s Manual
1. RAID box tab: Allow customer to select which RAID to monitor.
2. RAID box information: Lists model name, serial number and current RAID level.
3. Disk status: Allows you to monitor the status of each of the disk drives.
4. Disk information: Lists model name and capacity of each of the disk drives.
5. Re-build / initialize progress: Tracks the re-building or initialization process.
6. Fan Status: Display the status of fan.
7. Thermometer status: Display the status of system thermometer.
8. Message window: Provides RAID box number, date, time, message when event occur. http://www.accusys.com.tw
23
4. Setting up StorConn in Linux
User’s Manual
This chapter details the software installation process for StorConn on a Linux operating system. The screens shown are taken from Fedora code 6.
Installation flowchart
The set up process follows these steps: z In a Linux environment there is no need to first install a
Install
StorConn
Personal Web Server. You can begin installing StorConn right away. z The administrator must enter an email address to which alert emails will be sent automatically in the event of malfunction.
Configure
StorConn alerts
Launch
StorConn z z
The history log displays error messages.
Once these set-up steps are complete, you are ready to access StorConn. http://www.accusys.com.tw
24
Software Installation
1. Insert the GUI program CD-ROM.
2. ExtractStorConn_Linux-1.0-1.i38
6.rpm from CD-ROM to Desktop or a directory preferred.
3. Click on
StorConn_Linux-1.0-1.i386.rpm to begin installation of the
StorConn GUI program on Linux system.
4. Choose the drive that you want to install the program and Click on
Continue to next step.
5. Configuring mail alert settings.
Before installing StorConn, you must set the mail alert values. In the event of a RAID malfunction, an alert email will be sent to the
RAID administrator at a specified address.
User’s Manual http://www.accusys.com.tw
25
6. Enter the following values:
Mail Server:
Enter the IP address of the mail server in your network
Sender: Enter an email address to identify the source of the alert email
Receiver: Enter up to three e-mail addresses to which an email will be sent. Please add semicolon between mail address.
Notify time (minutes): Enter the interval time between successive alert email dispatches (minimum value: 1 / maximum value:
65536)
COM Port 1~4:
Mac users should keep the default setting
.
7. After fill up the above information, click on Save to go to next step.
8. Click on Close to complete the installation. http://www.accusys.com.tw
User’s Manual
26
4.3 Launching StorConn Server
1. Find and access into the
/Application/Accessories/terminal
. Open a terminal console.
2. Text in StartGUI on command line of terminal to launch the StorConn program.
3. As the StorConn launches, the program will automatically scan for RAID subsystems. A response similar to that beside should appear. Once the scan is completed, details of the Accusys RAID subsystems found will be listed. You will be asked Accept?!!<y\n>. If all controllers have been located, type y. http://www.accusys.com.tw
User’s Manual
27
4.4 Remotely accessing StorConn
User’s Manual
Note
Java Runtime Environment must be installed for StorConn to be successfully displayed on a browser and JRE version must be
5.0 or later. If JRE is not already installed, the application can be downloaded free from http://java.sun.com/downloads/
1. Open a browser on an
Internet-connected computer.
Enter the URL http://ip:3128/ where the IP is the IP address of the host machine and the port number is fixed at
3128.
The browser will automatically display the StorConn interface. Turn to Chapter
6 Monitoring with StorConn to learn about its capabilities. http://www.accusys.com.tw
28
User’s Manual
1. RAID box tab: Allow customer to select which RAID to monitor.
2. RAID box information: Lists model name, serial number and current RAID level.
3. Disk status: Allows you to monitor the status of each of the disk drives.
Open a browser on an Internet-connected computer.
Enter the url http://ip/ where ip is the IP address of the host machine.
4. Disk information: Lists model name and capacity of each of the disk drives.
5. Re-build / initialize progress: Tracks the re-building or initialization process.
6. Fan Status: Display the status of fan.
7. Thermometer status: Display the status of system thermometer.
8. Message window: Provides RAID box number, date, time, message when event occur. http://www.accusys.com.tw
29
5. Trouble shooting
User’s Manual
This chapter details the event messages and the possible solution for trouble shooting during using StorConn.
The StorConn displays following error screens. Please find follow information for trouble shooting or connect Accusys Internet Support Center as http://support.accusys.com.tw.
RAID Fail
If one disk drive in a RAID 0 array fails, or two disk drives in a RAID 5 or RAID 1 array, all data on the array is lost and cannot be recovered.
What to do if there is a RAID Fail
A RAID failure results in all data on the array being lost. Please refer to your RAID box user manual to create a new RAID, or call your vendor. http://www.accusys.com.tw
30
Controller Fail
If a COM Port fails, StorConn displays one of the following screens:
1. No Controller Connected: RAID box is not connected to the host
User’s Manual
What to do if there is this message?
A. Please check your COM port and RS232 cable.
2. Network Connect Fail: Server & applet network connection doesn’t work, or server was terminated.
What to do if there is this message?
A. Restart the StorConn software program. http://www.accusys.com.tw
31
3. Controller Fail: Controller shutdown or connection error.
User’s Manual
What to do if there is this message?
A. Re-boot RAID box and re-start the StorConn server.
Other Messages
Event Message
Fan is abnormal!
Battery is abnormal
Disk <No> failed!
Disk <No> is rebuilding!
Disk <No> rebuild OK!
Description
FAN Abnormal
Battery Abnormal
Disk Fail
Disk Rebuild Start
Action for solve
Call your vendor.
Call your vendor.
Replace the file disk.
Just notice that the disk is start to rebuilding.
Disk Rebuild Completed Just notice that the disk is rebuild done.
Disk <No> has Bad Sector
Notification!
Disk has bad sector
Disk <No> SMART Warning! Disk SMART warning
Just notice that the disk has bad sector, you can replace the disk.
Just notice that the disk has SMART warning, you can replace the disk. http://www.accusys.com.tw
32
6. Contact Accusys
User’s Manual
Accusys, Inc.
• 5F, No. 38, Taiyuan St , Jhubei City, Hsinchu County 30265, Taiwan R.O.C.
• Tel : +886-3-560-0288
• Fax : +886-3-560-0299
• Website: www.accusys.com.tw
• Sales : [email protected]
• Support: [email protected]
Accusys U.S.A., Inc.
• 46710 Fremont Blvd. Fremont, CA 94538, U.S.A.
• Tel:+1-510-661-0800
• Fax:+1-510-661-9800
• Toll-free number:+1-866-277-5888
• Website: www.accusysusa.com
• Sales : [email protected]
• Support: [email protected]
Accusys China, Inc.
• 1701, Blk B, Horizon International Tower, No. 6 Zhichun Street, Haidian District, Beijing, postcode 100088, China.
• Tel : +86-10-82800080 /81 /82 /83
• Fax : +86-10-82800784
• Website: www.accusys.com.cn
• Sales: [email protected]
• Support: [email protected] http://www.accusys.com.tw
33
Accusys EU B.V
User’s Manual
• Columbusstraat 22-26, Distripark Eemhaven, 3165 AD Rotterdam, Netherlands
• Tel : +31-10-4284117
• Fax : +31-10-4284114
• Website: www.accusyseu.com
• Sales : [email protected]
• Support: [email protected]
Accusys Korea, Inc.
• Baegang B/D 5F Shinsa-Dong 666-14 Kanggnam-Gu, Seoul, Korea
• Tel : (02)6245-9050
• Fax : (02)3443-9050
• Website: www.accusys.co.kr
• Email : [email protected] http://www.accusys.com.tw
34
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project