MD-MT285E(UK) TINSE0539AWZZ
PORTABLE MINIDISC
RECORDER
Thank you for purchasing this SHARP product.
For the best performance, read this manual carefully.
It will guide you in operating your SHARP product.
MODEL
MD-MT285E
OPERATION MANUAL
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
TINSE0539AWZZ
03G R AO 1
E
1
Important Introduction
-Accessories/Optional Accessories-
MD-MT285E
Accessories
Earphones x 1
Connection Cable (for analogue recording) x 1
AC Adaptor (RADPA8058AWZZ) x 1
Connection cable (for digital recording) x 1
Carrying Bag x 1
Notes:
! Parts and equipment mentioned in this operation manual other than those detailed above are not included.
! The AC adaptor may be different from the one in the drawing.
Optional Accessories
! FM/AM tuner remote control (AD-TRC1)
2
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_1.fm
TINSE0539AWZZ (UK)
! Car adaptor (AD-CA20X)
! Cassette adaptor (AD-CT14)
! Connection cable (for digital recording) (AD-M2DC)
MD-MT285E(UK) TINSE0539AWZZ
Contents
MD-MT285E
" Useful Features
Special Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Names of Controls and Indicators . . . . . . . . . . . . 6 - 7
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Advanced Playback . . . . . . . . . . . . . . . . . . . . . . 23 - 24
Advanced Recording . . . . . . . . . . . . . . . . . . . . . 25 - 30
Checking Displays . . . . . . . . . . . . . . . . . . . . . . . 31 - 33
" Power Source
" Advanced Features
Using with the AC Adaptor . . . . . . . . . . . . . . . . . . . . .9
Using with the Alkaline Battery . . . . . . . . . . . . . . . . . .9
Titling a MiniDisc . . . . . . . . . . . . . . . . . . . . . . . . 34 - 37
Editing a Recorded MiniDisc . . . . . . . . . . . . . . 38 - 40
Changing Default Settings . . . . . . . . . . . . . . . . . . . . 41
Listening through Another System . . . . . . . . . 42 - 43
" Preparation
Inserting a MiniDisc . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Hold Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
" Basic Operation
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 15
MD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 18
Listening to the Radio . . . . . . . . . . . . . . . . . . . . 19 - 20
Memorising a station . . . . . . . . . . . . . . . . . . . . . 21 - 22
1
Page
" References
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 44
MiniDisc System Limitations . . . . . . . . . . . . . . . . . . 45
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . 46 - 47
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 48 - 50
TERMS OF GUARANTEE . . . . . . . . . . . . . .Back cover
You can listen to the radio by connecting the optional
FM/AM tuner remote control (AD-TRC1) to the main
unit.
2
3
TINSE0539AWZZ (UK)
3
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_1.fm
4
5
-Contents-
Page
Important Introduction
" Important Introduction
2
6
7
8
9
MD-MT285E
Special Notes
" Warnings
-Special Notes-
Important Introduction
NOTES FOR USERS IN THE U.K. AND
IRELAND
SERVICE INFORMATION
In the unlikely event of your equipment requiring repair, please use the supplied postage paid label to
send your unit to the Sharp repair centre or contact
the dealer or supplier from whom it was purchased.
Where this is not possible, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
Please note; all calls will be charged at local rate.
Certain replacement parts and accessories may be
obtained from our main parts distributor.
WILLOW VALE ELECTRONICS LTD.
0121 766 5414
! The supplied AC adaptor contains no user serviceable
parts. Never remove covers unless qualified to do so.
It contains dangerous voltages, always remove the
mains plug from the main outlet socket before any
service operation or when not in use for a long period.
! The AC adaptor supplied with the MD-MT285E must
not be used with other equipment.
! To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing liquids. No objects
filled with liquids, such as vases, shall be placed on
the apparatus.
! Never use an AC adaptor other than the one specified.
Otherwise, problems or serious hazards may be created.
" Caution
! When recording important selections, make a preliminary test to ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
TINSE0539AWZZ (UK)
In the unlikely event of this equipment requiring repair during the guarantee period, you will need to
provide proof of the date of purchase to the repairing
company. Please keep your invoice or receipt, which
is supplied at the time of purchase.
4
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_1.fm
MD-MT285E
! Recording and playback of any material may require
consent, which SHARP is unable to give. Please refer
particularly to the provisions of the Copyright Act
1956, the Dramatic and Musical Performers Protection
Act 1958, the Performers Protection Acts 1963 and
1972 and to any subsequent statutory enactments
and orders.
! This equipment complies with the requirements of
Directives 89/336/EEC and 73/23/EEC as amended
by 93/68/EEC.
! US and foreign patents licensed from Dolby Laboratories.
! The letters in brackets contained in the model number
indicate the colour of the product only. Operation and
specifications are unaffected.
2
3
TINSE0539AWZZ (UK)
5
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_1.fm
4
5
-Special Notes-
Laser Diode Properties
! Material: GaAIAs
! Wavelength: 785 nm
! Pulse time:
Read mode: 0.8 mW Continuous
Write mode: max 10 mW 0.5S
min cycle 1.5S
Repetition
1
" Notes
Important Introduction
! At full volume, prolonged listening to a personal stereo
may damage the user's hearing. This model complies
with the law if used with the correct earphones (model
number RPHOH0004AWZZ). If the earphones are
damaged in any way, please order using the model
number given above.
! This product is classified as a CLASS 1 LASER
PRODUCT.
! Use the Portable MiniDisc Recorder only in accordance with the instructions given in this manual and do
not attempt to interfere with the interlock switch or
make any other adjustment as this may result in exposure to hazardous radiation.
6
7
8
9
MD-MT285E
Names of Controls and Indicators
Important Introduction
-Names of Controls and Indicators-
" Main unit
2
1
3
4
5
6
12
7
8
9
11
10
1
2 3
4
5
6
7
9 10 11
12
13
" Display panel
1. Level Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2. Random Indicator . . . . . . . . . . . . . . . . . . . . . . . . 24
3. Repeat Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 24
4. Long-play/Recording Mode Indicator . . . . . . . . 25
5. Monaural Mode Indicator . . . . . . . . . . . . . . . . . . 25
6. Battery Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 33
7. Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8. Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9. Disc Name Indicator . . . . . . . . . . . . . . . . . . . . . . 32
10. Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 14
11. Synchro Recording Indicator . . . . . . . . . . . . . . 27
12. Character/Time Information Indicator . . . . 14, 31
13. TOC Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
14. Track Number Indicator . . . . . . . . . . . . . . . . . . . 14
6
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_1.fm
TINSE0539AWZZ (UK)
8
14
Reference page
1. Open Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. Battery Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. Menu/Enter Button . . . . . . . . . . . . . . 14, 24, 34, 41
4. Stop/Power Off/Hold Button . . . . . . . . . 12, 15, 17
5. Play/Pause Button . . . . . . . . . . . . . . . . . 15, 17, 28
6. Bass/Delete/Synchro Button . . . . . . . . . 18, 27, 35
7. Remote Control/Earphones/
Line Output Socket . . . . . . . . . . . . . . . . . . . . 16, 42
8. Volume/Cursor Buttons . . . . . . . . . . . . . . . . 17, 36
9. Optical/Line Input Socket . . . . . . . . . . . . . . . . . 11
10. Record/Track Mark Button . . . . . . . . . . . 14, 27, 29
11. 5 V DC Input Socket . . . . . . . . . . . . . . . . . . . . 9, 42
12. Fast Forward/Fast Reverse/Recording Level/
Menu Select/Name Select Buttons . . . 14, 23, 25, 34
MD-MT285E
1
" Optional FM/AM tuner remote control:
AD-TRC1
6
11 12 13 14
3
7
8
15
4 5
9
Reference page
1. Earphones Socket . . . . . . . . . . . . . . . . . . . . . . . . 16
2. Hold Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Volume Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4. Display/FM Mode Button . . . . . . . . . . . . . . . 20, 31
5. Tuner On/Band Button . . . . . . . . . . . . . . . . . . . . 19
6. Play/Pause Button . . . . . . . . . . . . . . . . . . 15, 17, 28
7. Stop/Power Off Button . . . . . . . . . . . . . . . . . 15, 17
8. Fast Reverse/Tuning Down/
Tuner Preset Down Button . . . . . . . . . . . 19, 21, 23
9. Fast Forward/Tuning Up/
Tuner Preset Up Button . . . . . . . . . . . . . . 19, 21, 23
10. Bass/Memory Button . . . . . . . . . . . . . . . . . . 18, 21
10
16
18 19 20 21
17
TINSE0539AWZZ (UK)
11. Play Indicator
12. Record Indicator
13. TOC Indicator
14. Total Track Number Indicator
15. Track Number/Tuner Preset Number Indicator
16. Character/Time Information/Tuner Frequency
Indicator
17. Battery Indicator
18. Pause Indicator
19. Repeat Indicator
20. Random Indicator
21. Recording Mode Indicators
(MONO: FM Monaural Indicator)
2
3
Important Introduction
2
7
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_1.fm
-Names of Controls and Indicators-
1
4
5
6
7
8
9
-Precautions-
Important Introduction
MD-MT285E
Precautions
" Important
" Storing the unit
! Do not wear your earphones when you are crossing
streets or near traffic.
! Do not use your earphones whilst driving a motor vehicle, it may create a traffic hazard and may be illegal.
Remember to obey all of the safety
rules in your area.
! Do not play the unit at a high volume.
Hearing experts advise against extended listening at high volume levels.
! If you experience ringing in your ears, reduce the volume or discontinue use.
! No naked flame sources, such as lighted candles,
should be placed on the apparatus.
! Attention should be drawn to the environmental aspects of battery disposal.
! The apparatus is designed for use in moderate climate.
! This portable MD should only be used within the range
of 0°C - 40°C (32°F - 104°F).
Avoid using or leaving the unit in the following
places.
! Places exposed to direct sunlight for many hours
(especially in cars with the doors and windows closed)
or near heaters. (The cabinet may deform, change
colour or the unit may malfunction.)
! Places exposed to excessive dust.
! Places exposed to water.
! Places where temperatures are excessively high or
low.
! Places (bathrooms) where the humidity is extremely
high.
! Places with strong magnetic fields such as TVs or
loudspeakers.
! Places exposed to vibration.
! Places where sand can easily enter the inside of the
unit (beaches etc.).
! If the unit is used near another radio tuner or TV, noise
and/or picture interference may result. If you experience these problems, move the unit away from such
devices.
It is not recommended to put the
portable MD into a rear pocket, as
this may damage the product when
sitting.
Using this unit near mobile phones
may cause noise pickup. If it occurs, move it away from them.
8
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_1.fm
TINSE0539AWZZ (UK)
To avoid accidental electric shock or other possible
problems, observe the precautions listed below.
! Do not disassemble or modify the unit.
! Do not drop or subject the unit to shock.
! Do not use the unit near open flames.
! Do not spill liquid on the unit.
! Do not use an external power supply, other than the
5V DC supplied with this unit, as it may damage it.
! SHARP is not responsible for damage due to improper
use. Refer all servicing to a SHARP authorised service centre.
Using with the AC Adaptor
MD-MT285E
1
Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 5V socket.
AC 230V,
50/60 Hz
Caution:
! Insert the plugs firmly.
! When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.
3
To the wall socket
Using with the Alkaline Battery
Use one commercially available alkaline battery (LR6,
"AA" size).
1
2
3
Push and slide the battery cover.
Open the battery cover.
Insert an alkaline battery according to the
direction indicated in the battery compartment.
When inserting or removing the battery, push it towards the battery terminal.
4
TINSE0539AWZZ (UK)
1
Note:
Close the battery cover.
2
Caution:
! Do not replace the battery during operation.
! Do not use a rechargeable battery (nickel-cadmium battery etc.).
! Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due
to battery leakage.
! Installing the battery incorrectly may cause the unit to
malfunction.
Power Source
To the DC IN 5V socket
For information about the battery life, see "Specifications"
on page 49.
3
9
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_2.fm
-AC Adaptor/Alkaline Battery-
Note:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise,
playback may start automatically when electricity resumes.
2
4
5
6
7
8
9
MD-MT285E
Inserting a MiniDisc
1
Slide the OPEN lever to release the compartment door.
2
3
Lift up the compartment door.
Notes:
! Do not place the MiniDisc under the holder.
Insert a MiniDisc.
Insert according to the direction arrow.
Preparation
-Inserting a MiniDisc-
4
Close the compartment door.
1
2
3
4
! If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resistance is felt, remove the MiniDisc and reload it.
! The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 13.
! When you record on a MiniDisc, check that the erase
prevention tab is set to the "Recordable" position.
Recordable
Recording
prevented
TINSE0539AWZZ (UK)
10
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_2.fm
MD-MT285E(UK) TINSE0539AWZZ
Connections
3
MD-MT285E
1
You can record your favourite CDs or tapes to MD.
When recording, it is recommended to use the AC adaptor and also install the battery. Should the power failure occur,
the power source would be automatically switched to the battery.
HT
Supplied
connection
cable
LEFT
RIG
Red : to right
White : to left
3
■ To connect to a stereo system with "LINE OUT" or
"AUDIO OUT" sockets (analogue connection)
4
If the audio system has only one pair of sockets, they
are usually for input only and recording via this
connection is not possible.
5
AC 230V,
50/60 Hz
UT
O
ITAL
DIG
Supplied
connection cable
To the OPTICAL/
LINE IN socket
UT
O
ITAL
DIG
To the DC IN
5V socket
-Connections-
LEFT
Preparation
HT
RIG
2
To the
wall socket
■ To connect to a stereo system with a "DIGITAL OUT" or
"OPTICAL OUT" socket (digital connection)
TINSE0539AWZZ (UK)
Optional
connection cable
AD-M2DC
When compared with an analogue connection recording, using a
digital connection will give higher quality.
Some audio systems do not have a DIGITAL OUT socket.
Check before connecting.
11
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_2.fm
6
7
8
9
MD-MT285E
Hold Function
The operation can be kept even if other buttons are accidentally pressed in a place such as a crowded train. (The main
unit and remote control operate independently.)
-Hold Function-
Preparation
Optional FM/AM tuner remote control: AD-TRC1
Hold down the HOLD button for 3 seconds or more.
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Orange mark
Hold
Release
Hold
Release
To cancel the hold mode
Move the HOLD switch away from the safety position (the
opposite direction of the arrow).
To cancel the hold mode
Press and hold down the HOLD button for 3 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.
12
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_2.fm
TINSE0539AWZZ (UK)
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
Before Recording
" About the TOC
After any recording or editing function, "TOC" (Table Of
Contents) is displayed. To finalise the recording or editing
function, turn the power off. During this process, "TOC"
will flash and "TOC EDIT!" will be displayed. During any
recording or editing function, the MiniDisc unit lid is
locked, and the MiniDisc cannot be removed until the
process is finalised.
MD-MT285E
1
" To prevent recorded MiniDiscs from
being erased accidentally
2
Slide the accidental erase prevention tab, located on the
side of the MiniDisc, in the direction indicated by the
arrow.
The MiniDisc will then be protected against accidental
erasure.
3
4
Warning:
If the power is removed (Battery/AC adaptor) whilst
"TOC" is displayed, the MiniDisc unit lid will remain
locked until the battery/main power is restored and
the unit is turned on. Your new recordings or edited
changes will be lost and your MiniDisc may become
unusable.
Caution:
Whilst "TOC" or "TOC EDIT!" is displayed, follow the
instructions below.
-
Do not jerk or bump the unit.
Do not unplug the AC adaptor.
Do not remove the battery.
Do not subject the unit to shock.
TINSE0539AWZZ (UK)
Otherwise, tracks may not be recorded properly.
Recordable
Recording
prevented
To add a recording to such a MiniDisc, slide the accidental erase prevention tab back to its original position.
" Helpful tip when attaching a label
Preparation
TOC display
When attaching a label to an MiniDisc cartridge, be sure
to note the following. If the label is not attached properly,
the MiniDisc may jam inside the unit and you may not be
able to remove it.
! If the label peels off or partially lifts
away, replace it with a new one.
! Do not put a new label on top of an existing one.
! Attach the label only in the specified
location.
-Before Recording-
5
13
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_2.fm
6
7
8
9
MD-MT285E
Recording
Radio programmes can be received with the FM/AM
tuner remote control, however, they cannot be
recorded on MD.
3
Press the REC LEVEL
or
adjust the recording level.
button to
Adjust the recording level so that the maximum
sound volume from the
source makes the reading swing somewhere
between -4 dB and 0 dB.
-Recording-
Basic Operation
Analogue recording (connecting with analogue
cable)
0 - 30
Digital recording (connecting with digital cable)
You can adjust the level
in 1 dB increments between + 10 dB and - 10
dB.
Once you adjust the recording level, the setting is retained even after the recording stops. (For cancellation instructions for the digital recording level, see
page 41.)
Before recording
Cancel the hold mode.
The portable MD does not work whilst in the hold mode.
As for the details, see page 12.
Press the REC button.
Begin playback on the stereo system connected to this portable MD.
The sound from the earphones does not change
even if the digital recording level is adjusted.
4
Press the PAUSE button on the stereo system to enter the playback pause mode.
Here, you can search for the track to be recorded.
14
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
TINSE0539AWZZ (UK)
1
2
+ 10 dB to - 10 dB
MD-MT285E
Press the MENU/ENTER button.
To interrupt recording
Press the
or
button repeatedly to select the recording mode (page 25).
Press the
button.
! To resume recording, press the
button again.
! The track number will be increased by one each time
the recording is interrupted.
SP
9
(Stereo recording)
(2 times long recording)
(4 times long recording)
(Monaural recording)
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
10Press the
button to start the MiniDisc
unit recording.
11Begin playback on the stereo system, the
output will be recorded.
To stop recording
Press the :OFF/HOLD button.
Notes:
! Whilst "TOC" is displayed, the MiniDisc recorded contents are not yet updated.
! To prevent the new recording from being lost, it is not
possible to remove the MiniDisc whilst "TOC" is displayed.
2
3
4
5
-Recording-
7
8
Press the
or
button repeatedly to select "REC MODE".
! Complete the operation within 7 seconds whilst selecting the menus.
! Changing the volume level whilst recording does not
affect the recording.
! You cannot adjust the bass level whilst recording.
Press the MENU/ENTER button.
Basic Operation
5
6
1
Notes:
TOC display
To update the recorded contents of the
MiniDisc
TINSE0539AWZZ (UK)
Press the :OFF/HOLD button whilst in the stop mode.
The power turns off after recorded contents have been
updated on the MiniDisc.
15
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
6
7
8
9
MD-MT285E
MD Playback
Left
channel
R
Optional FM/AM tuner
remote control (AD-TRC1)
-MD Playback-
Basic Operation
L
Right
channel
To the REMOTE/
PHONES socket
TINSE0539AWZZ (UK)
Note:
To operate without the FM/AM tuner remote control, connect earphones to the REMOTE/PHONES socket.
16
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
MD-MT285E
1
To interrupt playback
Press the
button.
To resume playback, press the
button again.
2
To stop playback
3
Press the :OFF/HOLD button.
The power will turn off automatically after 2 minutes if the
unit is left in the stop mode.
Insert the earphone plug firmly into the earphone socket on the remote control.
2
Plug the remote control into the REMOTE/
PHONES socket on the unit.
3
4
Insert a MiniDisc (page 10).
Press the
Press the :OFF/HOLD button whilst in the stop mode.
Notes:
! Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your
usual expectations of noise, high volume may damage
your hearing.
! The sound escaping from your earphones may annoy
people around you. In particularly crowded places
(such as on trains or buses), reduce the volume.
button.
5
-MD Playback-
1
To turn off the power
Basic Operation
12
4
" Volume control
Press the VOL. + button to increase the volume and the
VOL. - button to decrease the volume.
TINSE0539AWZZ (UK)
Playback starts automatically with a playback only MiniDisc or a MiniDisc which is protected against accidental erasure (Auto-play function).
Volume (0 - 30)
17
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
6
7
8
9
MD-MT285E
MD Playback (continued)
" Bass control
BASS 1
Emphasised slightly.
BASS 2
Emphasised more.
BASS 3
Emphasised fully.
BASS OFF
Cancelled. (Default setting)
1
During playback, press the MENU/ENTER
button.
2
Press the
or
button repeatedly to select "SOUND ADJ" and then press the
MENU/ENTER button.
3
Press the
or
button repeatedly to select
bass setting, and the
VOL. + or VOL. - button
to select "B3".
" To customise low and high levels
You can set 3 types of bass settings (BASS 1 - BASS 3)
by adjusting low (Lo) and high (Hi) boost for each setting.
Emphasising low (Lo) and high (Hi) sound of BASS 3.
BASS 3
Sound
level
-MD Playback-
Basic Operation
Each time the BASS/SYNC button is pressed (Remote
control: BASS/MEMORY button is pressed), the bass
response will be switched as follows.
Lo3
After selecting "Lo" or
"Hi" with the
or
button, press the VOL. +
or VOL. - button to adjust
the low or high sound
setting.
5
Press the MENU/ENTER button.
Hi3
Hi
Frequency
Repeat steps 1 - 5 to change the other bass setting.
Hi5
Sound
level
Lo5
BASS 3
4
Default
Lo
Frequency
Hi
Notes:
! If you set the volume to 23 or more, the bass boost will
be adjusted automatically.
! When you make the setting of "To customise low and
high levels" with the volume level set to 23 or more,
the volume level will be reduced to 22 automatically.
18
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
TINSE0539AWZZ (UK)
Lo
B3
MD-MT285E(UK) TINSE0539AWZZ
Listening to the Radio
1
! During MD recording or editing, the TUNER/
BAND button does not work.
2
Press the
or
desired station.
button to tune in to the
Manual tuning:
Press the
or
button as many times as required to tune in to the desired station.
Auto tuning:
When the
or
button is pressed for 1 second or
more, scanning will start automatically and the tuner
will stop at the first receivable broadcast station.
TINSE0539AWZZ (UK)
In the tuner mode, you can use the remote control. Buttons on the main unit are disabled (except the :OFF,
and REC buttons).
3
! If you switch to the tuner whilst playing MD, playback automatically stops.
R
To the REMOTE/
PHONES socket
2
Press the TUNER ON/BAND button until
"FM" or "AM" appears in the display.
! The power turns on.
Right
channel
L
1
" Tuning
4
Basic Operation
Left
channel
MD-MT285E
-Listening to the Radio-
You can listen to the radio by connecting the optional
FM/AM tuner remote control (AD-TRC1) to the main
unit.
Notes:
! When radio interference occurs, auto scan tuning may
stop automatically at that point.
! Auto scan tuning will skip weak signal stations.
! To stop auto tuning, press the
or
button again.
After use:
Press the :OFF button. The power turns off.
19
MD-MT285E TINSE0539AWZZ
4
03/7/15
MD_MT285E_3.fm
5
6
7
8
9
MD-MT285E
Listening to the Radio (continued)
FM/AM aerial:
Basic Operation
-Listening to the Radio-
! The earphone lead works as
an FM aerial. Keep it as
straight as possible.
! An AM aerial is installed in the
remote control. Change the direction for optimum reception.
About contrast adjustment:
FM
AM
In the tuner mode, display contrast gets darker or weaker
by temperature changes. If this should happen, you can
adjust the contrast.
Whilst holding down the DISPLAY/FM MODE button,
press the
or
button to adjust the contrast.
0 - 15
Note:
Receiving FM stereo broadcasts in the monaural mode:
! If FM stereo signals are weak, press the DISPLAY/FM
MODE button to light the "MONO" indicator. The
reception changes to monaural, and the sound
becomes clearer.
Contrast adjustment is not possible during MD playback.
According to temperature changes, contrast is adjusted
for best visibility.
FM monaural mode indicator
! To return to the FM stereo reception mode, press the
DISPLAY/FM MODE button again. The "MONO" indicator goes out.
TINSE0539AWZZ (UK)
20
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
Memorising a station
You can store 10 AM and 30 FM stations in memory and
recall them at the push of a button.
MD-MT285E
1
2
Whilst holding down the BASS/MEMORY
button, press the
button for 1 second or
more. Auto scan starts.
2
3
1 The preset number flashes
and scanning starts.
3 When scanning reaches the
end, the preset number returns to "P1" and remains
displayed.
Optional FM/AM tuner remote control: AD-TRC1
" Presetting stations with auto scan
! Auto scan stops when memory number reaches
10 (AM stations) or 30 (FM stations), or when the
last frequency is reached.
The unit automatically stores the strongest stations in
memory, from preset number 1.
1
Press the TUNER ON/BAND button until "FM" or "AM" appears in the display.
Make sure the preset number is turned off before scanning. If the preset number remains lit,
press the BASS/MEMORY button to turn it off.
3
To save stations in another band, perform
steps 1 and 2.
-Memorising a station-
2 When a station is found, the
preset number appears for 1
second and it is stored.
Scanning resumes.
Basic Operation
4
The stations previously stored are cleared and new
ones are memorised.
TINSE0539AWZZ (UK)
21
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
5
6
7
8
9
MD-MT285E
Memorising a station (continued)
" Presetting stations manually
You can manually save stations which are not received
with auto scan. It is also possible to change the stored
stations.
-Memorising a station-
Basic Operation
1
Tune in to the desired station. (Perform
steps 1 - 2 in "Tuning" on page 16.)
2
Hold down the BASS/MEMORY button for 1
second to enter the preset tuning saving
mode.
3
Within 10 seconds,
press the
or
button to select the preset
channel number.
4
Within 10 seconds,
press the BASS/MEMORY button to store
that station in memory.
" To recall a memorised station:
1
2
3
Press the TUNER ON/BAND button.
Press the BASS/MEMORY button.
Press the
or
sired station.
button to select the de-
If the preset number indicator goes out before the
station is memorised, repeat the operation from step
2.
Repeat steps 1 - 4 to set other preset stations, or to change a preset station.
TINSE0539AWZZ (UK)
5
When a new station is stored in memory, the station
previously memorised will be erased.
22
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_3.fm
Advanced Playback
! To locate the desired portion
MD-MT285E
1
! To locate the beginning of a track
2
To move to the beginning of the next track:
Press the
button during playback.
3
To restart the track being played:
button during playback.
To locate the next track:
Press the
button whilst the unit is stopped.
To locate the previous track:
Press the
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
or
but" Normal playback will resume when the
ton is released.
" When the end of the last track is reached during fast
forward, the unit will enter the pause mode. When the
beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
button whilst the unit is stopped.
" To skip a number of tracks at one time, press the
or
button repeatedly until the desired track number
is shown.
button, playback starts from
" When you press the
the beginning of the track.
-Advanced Playback-
4
Useful Features
Press the
TINSE0539AWZZ (UK)
23
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
5
6
7
8
9
MD-MT285E
Advanced Playback (continued)
! Random play or repeat play
[On the main unit]
1
-Advanced Playback-
Useful Features
2
3
4
During playback, press the MENU/ENTER
button.
Press the
or
button repeatedly to select "PLAY MODE".
Press the MENU/ENTER button.
Press the
or
button repeatedly to select the desired playback mode.
RANDOM :
Random play
RANDOM REP : Repeat play of tracks in random order
ALL REPEAT : Repeat play of all of the tracks
1Tr REPEAT : Repeat play of a single track
NORMAL :
Normal playback
5
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
Note:
Complete the operation within 7 seconds whilst selecting
the menus.
[On the optional FM/AM tuner remote control: ADTRC1]
During playback, hold down the DISPLAY/FM MODE
button for 2 seconds or more.
Playback mode changes each time you press the DISPLAY/FM MODE button for 2 seconds or more.
RND:
Random play
RND :
Repeat play of tracks in random order
:
Repeat play of all of the tracks
1 :
Repeat play of a single track
No display:
Normal playback
Notes:
24
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
TINSE0539AWZZ (UK)
" If the playback mode is selected whilst stopped, press
the
button to start playback.
" When "TOC" is displayed, random play or repeat play
is impossible.
" In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.) After all of the tracks are played once in random order, the unit will stop automatically.
" During random, random repeat, or single track repeat
play, you can forward or reverse the MiniDisc only
within the track being played.
" During random play, the unit cannot find the beginning
of any track which has been played.
" Repeat play lasts until you stop the unit.
" When you stop and resume random play, the rest of
tracks are played starting from the last played track. If
you turn the power off and resume random play, all the
tracks are played in random order starting from the
interrupted track.
Advanced Recording
Press the
or
button repeatedly to select the desired recording mode.
Stereo recording (SP)
Monaural recording
In monaural, you can record twice as long as the stereo
recording.
2
2 times long recording (LP2)
3
4
Monaural recording (MONO)
5
4 times long recording (LP4)
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
6
Start recording.
-Advanced Recording-
2 times and 4 times long recording
Double or quadruple time of stereo recording is possible.
1
4
Useful Features
! Long-play recording
MD-MT285E
Notes:
1
TINSE0539AWZZ (UK)
2
3
When recording is paused, press the MENU/
ENTER button.
Press the
or
button repeatedly to select "REC MODE".
Press the MENU/ENTER button.
" Complete the operation within 7 seconds whilst selecting the menus.
" The recording mode remains unchanged until a new
mode is selected.
25
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
5
6
7
8
9
-Advanced Recording-
Useful Features
MD-MT285E
Advanced Recording (continued)
Notes:
" In monaural recording, the sound on the right and left
channels is mixed even if the input source is in stereo.
Although you can hear the stereo sound from the earphones, the recorded sound is monaural.
" Tracks recorded in 2 times long recording and 4
times long recording modes cannot be played with
the unit that does not support these modes. On
such a unit, no sound is heard. (The operation may
vary depending on the unit.)
" Tracks recorded in monaural cannot be played if
equipment do not support monaural playback.
! About ATRAC
The ATRAC (Adaptive TRansform Acoustic Coding) system compresses the sound data into 1/5 by cutting out
the inaudible sound. Since the sound is selected based
on psychoacoustics masking, the sound quality is not
impaired. This unit is equipped with the ATRAC3 compressing system that can reduce the sound data to 1/10
or 1/20 of its original size. By employing this system, 2
times and 4 times long recordings are enabled in stereo
mode.
! About the recording mode
You can select the recording mode from stereo recording,
2 times long recording, 4 times long recording, and monaural recording. Recordable time varies depending on
the recording mode. If the tracks are recorded on an 80minute MiniDisc, its recording time changes as follows:
Indication
Recording mode
Recording
time
SP
Stereo
MAX. 80 min.
LP2
2 times long (stereo)
MAX. 160 min.
LP4
4 times long (stereo)
MAX. 320 min.
MONO
Monaural
MAX. 160 min.
! Caution for 4 times long recording
(LP4)
Special compression methods are used to achieve 4
times long recording. This may cause some noise to be
recorded occasionally. When the highest quality is
required, stereo or LP2 recording is recommended.
TINSE0539AWZZ (UK)
26
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
MD-MT285E
! Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (Synchronised recording).
1
7
8
Press the MENU/ENTER button.
2
Select the recording mode (step 4, page 25)
and press the MENU/ENTER button.
3
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
1
2
3
4
Press the REC button.
Begin playback on the stereo system connected to this portable MD.
Press the
or
button to adjust the recording level (see page 14).
Press the PAUSE button on the stereo system to enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
TINSE0539AWZZ (UK)
5
6
Press the MENU/ENTER button.
Press the
or
button repeatedly to select "REC MODE".
" The BASS/SYNC button can be used instead of
steps 9 - 11.
" "SYNC" will flash.
" To cancel the operation, press the :OFF/HOLD
button.
12Begin playback on the stereo system.
Recording will begin automatically.
To interrupt recording
" When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, recording will also resume.
" If a silence lasts for 3 seconds or more, recording will
be paused (pause function does not work for approximately 10 seconds after recording starts). When the
unit receives sound again, recording automatically
starts.
" A new track number is created when recording
resumes.
-Advanced Recording-
lect "SYNC ON".
11Press the MENU/ENTER button.
4
Useful Features
9 Press the MENU/ENTER button.
10Press the or button repeatedly to se-
27
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
5
6
7
8
9
MD-MT285E
Advanced Recording (continued)
! To start recording from the middle of a
track
1
You can erase a portion of a track and make a new
recording.
All of the tracks that follow the newly recorded track will
be erased.
2
During playback, press the
button at the
point where you want to begin recording.
Press the REC button.
3
-Advanced Recording-
Useful Features
To cancel the operation, press the :OFF/HOLD button.
Press the MENU/ENTER button.
All of the tracks and track names will be erased, following the point where the playback is paused.
4
5
6
7
8
Press the MENU/ENTER button again.
Press the
or
button repeatedly to select "REC MODE".
Press the MENU/ENTER button.
Press the
or
button repeatedly to select the recording mode (step 4, page 25).
Press the
button.
Recording will start.
Notes:
28
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
TINSE0539AWZZ (UK)
" Complete the operation within 7 seconds whilst selecting the menus.
" To keep a track after the point you want to make a new
recording, move the track and then make recording
after that point. (See "Editing a Recorded MiniDisc",
page 40.)
MD-MT285E
1
! To create your own track numbers
! Recording tracks as a single track
You can create your own track numbers at any point.
You can record several pieces of music as a single track
by disabling the auto marker function.
2
When recording is paused or whilst recording...
3
1
2
4
In stereo recording
Within 40 seconds
In 2 times long recording
Within 80 seconds
In 4 times long recording
Within 160 seconds
In monaural recording
Within 80 seconds
3
4
5
Press the
or
button repeatedly to select "MARK".
Press the MENU/ENTER button.
Press the
OFF".
or
button to select "MARK
Press the MENU/ENTER button.
Notes:
" Complete the operation within 7 seconds whilst selecting the menus.
" When making digital recordings using a CD player or
an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker
function.
-Advanced Recording-
Numbering restriction
If you try to number more than 10 tracks in certain
amount of time, "SORRY" will be displayed and the operation will be disabled.
In that case, wait until the next operation can be
resumed.
Press the MENU/ENTER button.
Useful Features
Whilst recording, press the REC button at the point
where you want to create track numbers.
The track number will be increased by one.
One track number will be added every time the REC button is pressed.
TINSE0539AWZZ (UK)
29
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
5
6
7
8
9
MD-MT285E
Advanced Recording (continued)
! About track numbers
-Advanced Recording-
Useful Features
1. Track numbers are created automatically during recording via the analogue connection when a silence of
1 second or more is detected (Auto marker function).
A series of tracks can be recorded as one by disabling
the auto marker function (see page 29).
About
1 second
Silence
First track
" When recording, if a programmed playback is performed by the source or playback is performed by
selecting tracks manually, the MiniDisc track numbers
may not be the same as on the source.
" Track numbers may not be created properly, depending on the connected stereo system.
! About sampling rate converter
Second track
2. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the
same points as on the CD or MiniDisc (Synchro marker function).
Playback
side
First track
Track A
Second track Third track
Track B
Track C
Recording
side
First track
Track A
Second track Third track
Track C
Track B
! Note for digital recording
You cannot copy a MiniDisc that you recorded from digital
inputs to another MiniDisc or DAT. It is prevented by the
SCMS (Serial Copy Management System). Recording
from analogue inputs is not affected.
Digital signals
CD player,
MiniDisc
player,
etc.
Digitally recorded Cannot record
MiniDisc
Digital
connection
Digital
connection
TINSE0539AWZZ (UK)
" Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
" The track numbers on the playback side may not
match the track numbers recorded on the MiniDisc.
This portable MD incorporates a sampling rate converter
so that it can record from digital radios or DAT tape
recorders.
30
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
Checking Displays
MD-MT285E
B
A
Track name
2
Elapsed playback time
Notes:
" If the disc name or the track name was not originally
recorded on the MiniDisc, "NO NAME" will be displayed.
" Elapsed playback time and remaining playback time
may be different from the actual time.
" The selected display will not change even after the
disc is replaced.
D
C
[On the optional FM/AM tuner remote control: ADTRC1]
During playback or whilst in the pause mode, each time
the DISPLAY/FM MODE button is pressed, the display
will change as follows.
A
B
3
Remaining playback time
4
-Checking Displays-
[On the main unit]
1 During playback or whilst in the pause mode,
press the MENU/ENTER button.
2 Press the
or
button repeatedly to select
"DISPLAY".
3 Press the MENU/ENTER button.
4 Press the
or
button.
Each time the
or
button is pressed, the display
will change as follows.
1
Track number
Useful Features
! To check the elapsed time and remaining time of the track
C
TINSE0539AWZZ (UK)
D
31
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
5
6
7
8
9
MD-MT285E
Checking Displays (continued)
-Checking Displays-
Useful Features
! To check the remaining recording time
and the total playing time
[On the main unit]
1 Whilst in the stop mode, press the MENU/ENTER
button.
2 Press the
or
button repeatedly to select
"DISPLAY".
3 Press the MENU/ENTER button.
4 Press the
or
button.
Each time the
or
button is pressed, the display
will change as follows.
A
Disc name
Total number of tracks
Total playing time
Remaining recording time
Notes:
" Remaining recording time varies depending on the set
recording mode.
" Remaining recording time will not be displayed with a
playback only MiniDisc.
B
C
D
[On the optional FM/AM tuner remote control: ADTRC1]
Whilst in the stop mode, each time the DISPLAY/FM
MODE button is pressed, the display will change as follows.
B
C
A
TINSE0539AWZZ (UK)
D
32
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
MD-MT285E
! To display the playing time of an individual track
4
5
6
B
2
3
How to read the battery indicator
4
Press the MENU/ENTER button.
Press the
or
button repeatedly to select
"DISPLAY".
Press the MENU/ENTER button.
Press the
or
button
C
to select the playing time.
Press the MENU/ENTER button.
[On the optional FM/AM tuner remote control: ADTRC1]
1 Whilst in the stop mode, select a track by pressing the
or
button.
2 Press the DISPLAY/FM MODE button.
A
The remaining amount of battery level is shown by the
battery indicator (
) during operation.
B
C
Track name
When the battery
level is high
When the battery
level is very low
" When the battery level is very low, the battery indicator
will flash. Replace the alkaline battery with a new one.
" When the battery has run out completely, "BATT
EMPTY" will appear. Then, the power will be disconnected automatically.
Notes:
" The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
" When the AC adaptor or a optional car adaptor is
used, the battery indicator will not be shown.
" The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
" In the tuner mode, the battery indicator does not light.
-Checking Displays-
2
3
A
1
Useful Features
[On the main unit]
1 Whilst in the stop mode,
press the
or
button
to display the track
number and track name.
! Checking the remaining amount of battery level
TINSE0539AWZZ (UK)
Track number
Playing time
33
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_4.fm
5
6
7
8
9
MD-MT285E
Titling a MiniDisc
! Creating disc and track names
Load a MiniDisc to be named. A playback only or recording prevented MiniDisc cannot be edited.
2
-Titling a MiniDisc-
Advanced Features
1
3
4
5
<Disc name>
Whilst in the stop
mode, press the MENU/
ENTER button.
<Track name>
Whilst in the pause
mode, press the MENU/
ENTER button.
Press the
or
button repeatedly to select "EDIT".
Press the MENU/ENTER button.
<Disc name>
Press the
or
button repeatedly to select
"DISC NAME".
6
<Track name>
Press the
or
button repeatedly to select
"TRACK NAME".
Press the
button repeatedly to select the
type of characters.
(Capital letters) (Lower-case letters) (Numbers and symbols)
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
7
Press the
or
lect the letter.
8
Press the MENU/ENTER button to enter it.
button repeatedly to se-
Press the MENU/ENTER button.
Position where the next letter will be entered
Cursor
" The unit will enter the character input mode.
" To cancel the operation, press the :OFF/HOLD
button.
Note:
Complete the operation within 7 seconds whilst selecting
the menus.
TINSE0539AWZZ (UK)
34
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
MD-MT285E
! To enter a space
" "TOC" will be displayed. To write the updated contents to the MiniDisc, press the :OFF/HOLD button.
" You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the recorded contents have been updated.
Space
! Characters (symbols)
Capital letters
D
L
A B C D E F G H
S T U V W X Y Z .
I
J
,
/
g h i
z . ,
/
K L M N O P Q R
Lower-case letters
D
L
s
a
b
c
e
f
t
u
v w x
d
y
j
Press the VOL. + button to move the cursor to the right.
k
l
m n
o
p q
r
Notes:
" One disc name and up to 255 track names can be created per disc (a maximum of 100 characters for the
disc and each track name and a total of about 1,700
characters can be entered).
" If you enter "LP:" at the beginning of a name, "LP:"
may not be displayed.
2
3
4
5
-Titling a MiniDisc-
press and hold down the MENU/ENTER button for 2 seconds or more.
Press the VOL. + or VOL. - button to move the cursor to
the character you want to erase, and then press the
BASS/SYNC button.
You can also erase a character by selecting "DL" and
pressing the MENU/ENTER button.
Advanced Features
9 To enter more letters, repeat steps 6 - 8.
10When the name is completely entered,
1
! To erase a character
Numbers and symbols
D
L
)
D
L
1
*
2 3 4 5
+ ,
.
6
/
7
:
8 9 0
; < =
! " # $ % &
> ? @ _ `
'
(
TINSE0539AWZZ (UK)
(Delete) : erases a character.
(Space) : indicates a space.
35
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
6
7
8
9
MD-MT285E
Titling a MiniDisc (continued)
! To add characters
! Stamping titles from another MiniDisc
1
Before stamping
Put the unit in the character input mode.
(Perform steps 1 - 5 on page 34.)
Press the VOL. + or VOL. - button to move
the cursor to the character before which you
want to add a new character.
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the Master MiniDisc to another
MiniDisc (for stamping).
1. What is a master MiniDisc?
-Titling a MiniDisc-
Advanced Features
2
3
Select the character to add.
(Perform steps 6 - 8 on page 34.)
4
Press and hold down the MENU/ENTER button for 2 seconds or more.
A recordable MiniDisc that contains tracks and character information. (You cannot transfer the information
from a playback-only MiniDisc.)
2. What is a MiniDisc for stamping?
" "TOC" will be displayed. To write the updated contents to the MiniDisc, press the :OFF/HOLD button.
" You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the recorded contents have been updated.
A MiniDisc that contains the same tracks in the same order as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)
TINSE0539AWZZ (UK)
36
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
MD-MT285E
Master MiniDisc operation
Operation of the MiniDisc for stamping
1
9
Insert a master MiniDisc.
1
Load a MiniDisc for stamping.
2
Do not mistake the master MiniDisc for the target one.
4
5
6
Press the
or
button repeatedly to select "NAME STAMP".
Press the MENU/ENTER button.
The unit will finish recording the character information
and enter the stop mode.
Note:
If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display "Can'tSTAMP" and turn off.
To cancel the operation, press the :OFF/HOLD button.
7
8
Press the MENU/ENTER button.
3
10Press the MENU/ENTER button.
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
When the unit displays "CHANGE MD", remove the master MiniDisc.
4
5
-Titling a MiniDisc-
3
Whilst in the stop mode, press the MENU/
ENTER button.
Press the
or
button repeatedly to select "EDIT".
Press the MENU/ENTER button.
Advanced Features
2
Remove it without turning off the power. Or, the operation will be cancelled.
TINSE0539AWZZ (UK)
37
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
6
7
8
9
MD-MT285E
Editing a Recorded MiniDisc
! To erase one track at a time
! To erase all of the tracks at once
1
1
Advanced Features
-Editing a Recorded MiniDisc-
2
3
4
5
Start playing the track to be erased, and
press the
button.
Press the MENU/ENTER button.
Press the
or
button repeatedly to select "EDIT".
Press the MENU/ENTER button.
Press the
or
lect "ERASE".
2
3
4
button repeatedly to se-
5
6
Press the
or
button repeatedly to select "ALL ERASE".
Press the MENU/ENTER button.
Press the MENU/ENTER button.
To cancel the operation, press the :OFF/HOLD button.
7
Whilst in the stop mode, press the MENU/
ENTER button.
Press the
or
button repeatedly to select "EDIT".
Press the MENU/ENTER button.
To cancel the operation, press the :OFF/HOLD button.
6
Press the MENU/ENTER button again.
Press the MENU/ENTER button again.
The track will be erased.
8
To erase other tracks, repeat steps 1 - 7.
Caution:
Once a track has been erased, it cannot be recovered. Check the track number before erasing it.
38
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
TINSE0539AWZZ (UK)
Note:
Complete the operation within 7 seconds whilst selecting
the menus.
All of the tracks will be erased.
MD-MT285E
! To divide a track
! To combine tracks
1
1
6
Press the
or
lect "DIVIDE".
button repeatedly to se-
6
Press the
or
lect "COMBINE".
button repeatedly to se-
Press the MENU/ENTER button.
Press the MENU/ENTER button.
To cancel the operation, press the :OFF/HOLD button.
7
4
5
Press the
or
button repeatedly to select "EDIT".
Press the MENU/ENTER button.
Press the MENU/ENTER button again.
The track will be divided into two tracks, and the unit
will be paused at the beginning of the second of the
two new tracks.
To cancel the operation, press the :OFF/HOLD button.
7
Press the MENU/ENTER button again.
3
Advanced Features
4
5
Press the
or
button repeatedly to select "EDIT".
Press the MENU/ENTER button.
2
3
2
Start playing the latter of the two tracks to be
combined, and press the
button.
Press the MENU/ENTER button.
The two tracks will be combined, and the unit will be
paused at the beginning of the combined track.
-Editing a Recorded MiniDisc-
2
3
Start playing the track to be divided into two.
Press the
button at the point where you
want to divide the track.
Press the MENU/ENTER button.
1
TINSE0539AWZZ (UK)
39
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
4
5
6
7
8
9
MD-MT285E
Editing a Recorded MiniDisc (continued)
! To move a track
1
Advanced Features
-Editing a Recorded MiniDisc-
2
3
4
5
6
Play the track to be moved, and press the
button.
Press the MENU/ENTER button.
Press the
or
button repeatedly to select "EDIT".
Press the MENU/ENTER button.
Press the
or
lect "MOVE".
button repeatedly to se-
Press the MENU/ENTER button.
To cancel the operation, press the :OFF/HOLD button.
7
Press the
tion.
8
Press the MENU/ENTER button again.
or
button to select the direc-
Total number of tracks that can be divided:
Each disc can hold up to 255 tracks. However, even if the
number of assigned tracks has not reached 255, it might
not be possible to make any further divisions of tracks.
To combine two non-adjacent tracks:
First, put the two tracks next to each other in the order
you want using the MOVE function. Then combine them
using the COMBINE function.
When one or both tracks to be combined have a
name:
The first track name will be used. However, when the first
track does not have a name, the second track name will
be used.
In the following cases, tracks may not be combined.
" Tracks recorded by different input modes/sources cannot be combined.
Example:
Digital recorded track and analogue recorded track.
Different recording modes (stereo recording, 2 times
long recording, 4 times long recording, monaural recording).
" Tracks whose recording time is less than 12 seconds.
40
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
TINSE0539AWZZ (UK)
The track will be moved, and the unit will be paused at
the beginning of the track.
When a track has a name before dividing:
The two new tracks will have the same name. However, in
the "TOC FULL" condition, the second track may not be
named.
Changing Default Settings
MD-MT285E
1
! Beep sound
1
With a MiniDisc inserted, press the MENU/
ENTER button for 2 seconds or more. "SET
UP" will appear.
You can eliminate the confirmation sound that beeps
when you press a button.
2
When you release the button, "BEEP" will flash.
! Auto play
You can make the unit not play automatically when you
insert a playback-only MiniDisc or an accidental erasure
protected MiniDisc.
3
4
5
Press the
or
button to select the menu.
Press the MENU/ENTER button to display
the setting item.
Press the
or
button to select the setting items.
Press the MENU/ENTER button.
! Auto power save
When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the
auto power save function. (Battery will drain faster.)
What is auto power save function?
MENU
SETTING ITEM
During playback, maximum 40 seconds (in stereo) of
musical information is stored. Auto power save function
automatically adjusts the storage time between 5 and 40
seconds to reduce the power consumption. If this function is cancelled, the storage time cannot be adjusted.
" If this unit is used with the AC adaptor, the storage
time will be 40 seconds regardless of the settings.
" The storage time varies depending on the recording
mode.
TINSE0539AWZZ (UK)
BEEP (Confirmation
sound)
BEEP ON*
Beep
BEEP OFF
Silent
AUTO PLAY (Auto
play)
A-PLAY ON*
Set.
A-PLAY OFF
Cancelled.
POWER SAVE (Auto
power save)
AUTO Psave* Set.
Psave OFF
Cancelled.
! Digital recording level
D-LEVEL (Digital recording level)
D.L MODE 1*
Setting retained.
D.L MODE 2
Cancelled.
"D.L MODE 1"
The digital recording level you set will be kept even after
cancelling recording.
"D.L MODE 2"
Every time you cancel recording, the level will return to
[D.L 0dB].
(*) indicates default setting.
4
-Changing Default Settings-
2
3
Advanced Features
Whilst in the stop mode ...
41
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
5
6
7
8
9
MD-MT285E
Listening through Another System
! Listening through a stereo system
Advanced Features
-Listening through Another System-
To the LINE INPUT sockets White:
To the left
Red:
To the right
! Listening through a car stereo
Optional cassette
adaptor (AD-CT14)
Optional
FM/AM tuner
remote control
(AD-TRC1)
Optional
car adaptor
(AD-CA20X)
Optional FM/AM
tuner remote control
(AD-TRC1)
To the
REMOTE
/PHONES socket
To the DC IN 5V socket
Notes:
" Adjust the volume of both this portable MD and a car
stereo.
" Do not operate this portable MD whilst you drive a car. It
may distract your attention and cause a traffic accident.
" Do not use any car adaptor except for the optional ADCA20X.
" Remove the battery when you power the unit from the
car battery.
" To operate without AD-TRC1 (option), connect the
cable to the REMOTE/PHONES socket.
42
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_5.fm
TINSE0539AWZZ (UK)
Notes:
" It is recommended that the volume level of the
MiniDisc unit be set to maximum when listening
through a stereo system.
" When recording with a stereo system, eliminate the
confirmation sound (page 41). Otherwise, it will also
be recorded.
" The recording will be made in the analogue mode.
" Character information will not be recorded.
" To operate without AD-TRC1 (option), connect the
cable to the REMOTE/PHONES socket.
To the
REMOTE
/PHONES
socket
Troubleshooting
! Resuming auto play
When you stop and then re-start playback, without
removing the disc, playback will resume from the point at
which the disc was stopped.
Stopping
Stopped track
3
The unit does not turn on.
" Is the AC adaptor disconnected?
4
Stopping
Stopped track
Playing
" Is the unit in the hold mode?
5
" Has condensation formed inside the unit?
" Is the unit being influenced by mechanical shock or
by static electricity?
No sound is heard from the earphones.
The unit provides the following functions when you
use it with the optional car adaptor (AD-CA20X)
(when the battery is removed):
1. When you turn off the engine, the power of this portable
MD also turns off. (It may not work with some types of
cars.)
2. When you restart the engine, playback starts from the
beginning of the stopped track.
Stopping
TINSE0539AWZZ (UK)
Stopped track
Playing
" Is the volume set too low?
" Is the earphones plugged in?
References
Once you remove the MiniDisc, playback starts from the
first track.
First track
2
" Is the battery exhausted?
Playing
First track
1
Many potential "problems" can be resolved by the owner
without calling a service technician. If something seems
to be wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
-Troubleshooting-
First track
MD-MT285E
" Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music?
When the operation buttons are pressed, the unit
does not respond.
" Is the unit in the hold mode?
" Is the battery exhausted?
" Is the earphones plug inserted firmly?
43
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
6
7
8
9
MD-MT285E
Troubleshooting (continued)
Some sounds are skipped.
" Is the battery exhausted?
" Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected.
References
-Troubleshooting-
" Has the track number or character information been
written on the disc yet?
" Is the unit in the recording or editing mode?
Recording and editing are impossible.
" Is the MiniDisc protected against accidental erasure?
" Has the recording level been properly adjusted?
" Is the unit connected properly to the other equipment?
" Is the AC adaptor unplugged or did a power failure
occur whilst recording or editing?
" Is the unit in the hold mode?
" Is an optical signal being output from the stereo system? Read the operation manual for the stereo system.
When this product is subjected to strong external interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Unplug the AC adaptor from the wall socket.
2. Remove the battery.
3. Leave the unit completely unpowered for approximately
30 seconds.
4. Plug the AC adaptor back into the wall socket and reoperate the unit.
! Moisture condensation
When the unit has condensation inside, the disc signals
cannot be read, and the unit may not function properly.
In the following cases, condensation may form inside the
unit.
" Shortly after turning on a heater.
" When the unit is placed in a room where there is
excessive steam or moisture.
" When the unit is moved from a cool place to a warm
place.
To remove condensation:
Remove the MiniDisc and leave the unit for approximately 1 hour. The condensation should evaporate and
the unit will work properly.
" Is a TV or computer near the unit?
44
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
TINSE0539AWZZ (UK)
The radio makes unusual noises continuously.
! If trouble occurs
MiniDisc System Limitations
MD-MT285E
1
The unit may have the following symptoms whilst recording or editing. The unit is not out of order.
2
LIMITATIONS
More than 255 tracks (maximum) cannot be recorded regardless of
the recording time. If the MiniDisc is recorded or edited repeatedly or
if it has scratches (recording skips scratched parts), you may not be
able to record the maximum tracks above.
The remaining recording time does not
increase even though you erased
tracks.
The unit does not count non-recorded portions that last 12 or fewer
seconds to display the remaining recording time. The time may not
increase even if you erase short tracks.
The total of the recorded time and the
remaining time does not match the maximum recordable time.
One cluster (approximately 2 seconds) is the minimum unit for recording. For example, a 3-second track uses 2 clusters (approximately 4 seconds). Therefore, the actual recordable time may be shorter
than the displayed time.
Combine function does not work.
A MiniDisc on which recording and editing are repeated may not allow the combine function.
Sound skips in fast reverse/forward.
If one track is divided and recorded in separate places on a repeatedly recorded or edited MiniDisc, sound may skip.
A track number is created in the middle
of a track.
A track number may be created if there are scratches or dust on the
MiniDisc.
3
References
"DISC FULL" or "TOC FULL" appears
even though the MiniDisc still has recording time left.
-MiniDisc System Limitations-
SYMPTOM
TINSE0539AWZZ (UK)
45
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
4
5
6
7
8
9
MD-MT285E
Error Messages
ERROR MESSAGES
MEANING
BATT EMPTY " The battery has run down.
BLANK MD
References
-Error Messages-
Can't COPY
ERROR MESSAGES
Can'tSTAMP
" Nothing is recorded.
(Check the number of tracks.)
Can'tWRITE
" You tried to record from a copy prohibited MiniDisc.
" Cannot save the TOC information
correctly to a MiniDisc.
DEFECT!
" The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a recordable one.)
" You tried to record signals other than
music (such as data).
" A track cannot be edited.
(Change the stop position of the track
and then edit it.)
Can't LOCK
" You tried to remove the MD whilst recording or editing.
Can't PLAY
" You tried to play back a track that
cannot be played with this equipment.
Can't READ
(*)
DISC FULL
" The disc is out of recording space.
Er-MD (**)
" The microprocessor has reported a
system fault and the unit is out of order.
(To have it repaired, go to the distributor
where you purchased the unit.)
HOLD
" The unit is in the hold mode.
LOCKED
" You removed a MiniDisc whilst recording or editing.
" The disc data cannot be read because the disc is damaged.
" Recording cannot be performed correctly due to vibration or shock.
(Turn off the power before removing the
MiniDisc.)
NO DISC
" A disc has not been loaded.
A number or symbol appears in (*) position.
46
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
TINSE0539AWZZ (UK)
(Reload the Minidisc or replace it with
another one.)
Can't REC
" Stamp function does not work.
(Replace the disc with a recorded disc.)
(Record using the analogue cable.)
Can't EDIT
MEANING
MD-MT285E
1
ERROR MESSAGES
" Poor connection of the digital cable.
TEMP OVER
" No output signal comes out from the
connected unit.
(Use the AC power for the connected
unit.)
" The input signal has improper sampling frequency.
PLAY MD
" You tried to record on a playbackonly disc.
POWER ?
" AC adaptor other than specified.
TOC FORM
(**)
TOC FULL
Tr. Protect
PROTECTED " The write protection tab of a MiniDisc
is set to the protected position.
SORRY
" Since a track number is currently being located or updated, the unit cannot accept your command.
(Wait a while and try the operation
again.)
MEANING
2
" The temperature is too high.
(Turn off the power, and wait a while.)
3
" There is an error in the recording signal.
4
(Erase all of the tracks, and then record
again.)
5
" There is no space left for recording
character information (track names,
disc names, etc.).
" The track has been protected from
being erased.
(Edit the track with the device on which
it was recorded.)
? DISC
" A disc which contains data other
than music was played.
References
NO SIGNAL
MEANING
-Error Messages-
ERROR MESSAGES
(A disc which contains nonmusic data
cannot be played.)
" There is an error in the signal recorded on the disc.
TINSE0539AWZZ (UK)
A number or symbol appears in (*) position.
47
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
6
7
8
9
MD-MT285E
Maintenance
Specifications
References
-Maintenance/Specifications-
! Cleaning
When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external surfaces only).
Clean the plugs and the connecting
sockets.
If the plugs or sockets are dirty, noise
may be heard. Cleaning will prevent
noise.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause
malfunctions.
Note:
When the battery cover comes
off, attach the cover back as
shown below.
1
2
As a part of our policy of continuous improvement,
SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some
deviations from these values in individual units.
! Portable MiniDisc recorder: MD-MT285E
Power source:
DC 5 V:
48
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
TINSE0539AWZZ (UK)
AC adaptor (AC 230
V, 50/60 Hz)
DC 1.5 V: Commercially available, "AA" size (LR6),
alkaline battery x 1
DC 4.5 V: Optional car adaptor,
AD-CA20X (for cars
with a 12-24 V DC
negative earth electrical system)
Power consumption: 7 W (AC adaptor)
Output power:
RMS: 20 mW (10 mW + 10 mW)
(0.2 % T.H.D.)
Dimensions:
Width: 83 mm (3-9/32")
Height: 28 mm (1-1/8")
Depth: 77 mm (3-1/32")
Weight:
110 g (0.24 lbs.) without battery
Input socket:
Line/optical digital
Output socket:
Earphones (impedance: 32
ohms)/remote control
Type:
Portable MiniDisc recorder
Signal readout:
Non-contact, 3-beam semiconductor laser pickup
MD-MT285E
Input sensitivity:
LINE
Reference input
level
Input impedance
100 mV
20 k ohms
Output level:
TINSE0539AWZZ (UK)
Specified
output
Maximum
output level
Load impedance
Earphones
-
10 mW + 10
mW
32 ohms
LINE
250 mV (-12
dB)
-
10 k ohms
1
Battery life:
When using a commercially available, high capacity, "AA"
size (LR6), alkaline battery
Stereo
2
Continuous recording: Approx. 8.5 hours
3
Continuous play: Approx. 33 hours
2 times
long
Continuous recording: Approx. 12 hours
4 times
long
Continuous recording: Approx. 18 hours
4
Continuous play: Approx. 44 hours
Continuous play: Approx. 52 hours
" The continuous recording time is for analogue inputs
when the volume level is set to "VOL 0".
" The continuous play time shows the value when the
volume level is set to "VOL 15".
" The above values are the standard values when the
unit is used at an ambient temperature of 25°C (77°F).
" The operating time when using an alkaline battery
may be different, depending on the type and manufacturer of the battery, and on the operating temperature.
5
-Specifications-
Stereo 2 channels/monaural 1
channel
Frequency response: 20 - 20,000 Hz ( 3 dB)
Rotation speed:
Approx. 400 - 1,800 rpm CLV
Error correction:
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
Coding:
ATRAC/ATRAC3 (Adaptive
TRansform Acoustic Coding),
24-bit computed type
Recording method: Magnetic modulation overwrite
method
Sampling frequency: 44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz,
and then recorded.)
Wow and flutter:
Unmeasurable (less than 0.001
% W. peak)
References
Audio channels:
49
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
6
7
8
9
MD-MT285E
Specifications (continued)
! Optional FM/AM tuner remote control:
AD-TRC1
-Specifications-
References
The following values are obtained with the FM/AM tuner
remote control connected to MD-MT285E.
Radio output power: RMS: 10 mW (5 mW + 5 mW)
(5 % T.H.D.)
Dimensions:
Width: 92 mm (3 - 5/8")
Height: 21 mm (27/32")
Depth: 20 mm (13/16")
Weight:
34 g (0.07 lbs.)
Frequency range:
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Preset channel:
FM 30 / AM 10 preset memory
Battery life when tuning in the radio:
When using a commercially available, high capacity, "AA"
size (LR6), alkaline battery
FM
41 hours (Continuous reception)
AM
74 hours (Continuous reception)
" The above values are the standard values when the
unit is used at an ambient temperature of 25°C (77°F).
" The operating time when using an alkaline battery
may be different, depending on the type and manufacturer of the battery, and on the operating temperature.
TINSE0539AWZZ (UK)
50
MD-MT285E TINSE0539AWZZ
03/7/15
MD_MT285E_6.fm
MEMO
MD-MT285E (TINSE0539AWZZ)
TERMS OF GUARANTEE
Subject to the terms listed below, Sharp Electronics (U.K.)
Ltd. (hereinafter called “the Company”) guarantee to provide for the repair of, or at its option replace this Sharp
Equipment, or any component thereof, (other than batteries), which is faulty or below standard, as a result of
inferior workmanship or materials.
The conditions of this guarantee are:
1. The guarantee shall only apply to defects which occur
within one year from the date of purchase, provided
that this equipment is sent to the repair address within
this period.
2. This guarantee covers equipment intended for private
domestic use only. This guarantee does not apply to
equipment used in the course of a business, trade or
profession.
3. The guarantee does not cover MiniDiscs or batteries.
4. This guarantee does not cover any faults or defects
caused by accident, misuse, fair wear and tear, neglect,
tampering with the equipment, or any attempt at adjustment or repair other than by a Service Facility appointed by Sharp.
5. In the unlikely event of a defect occuring, the product
must be returned to the Company’s repair centre with
proof of purchase. A postage paid label and a fault report form are supplied with the product for this purpose.
It is your responsibility to ensure that the packaging is
adequate, and to obtain proof of posting.
Further details of the repair service, which is available
after the guarantee period on a chargeable basis, and
additional report forms and labels can be obtained by
telephoning 0870 738 0000.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to
the consumer’s statutory rights and does not affect
these rights in any way.
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE0539AWZZ
03G R AO 1
E