Embedded | User manual | LPC3250 OEM Board Datasheet

Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
LPC3250 OEM Board Feature Highlights
The LPC3250 OEM Board provides a quick and easy solution for
implementing a high-performance ARM ARM926EJ-S based design
around the LPC3250 from NXP.
 Build around NXP's ARM926EJ-S LPC3250 microcontroller
with 256Kbyte internal SRAM
 64MByte external DDR SDRAM, via 16-bit databus
 128 Mbyte NAND FLASH
 4 MByte SPI-NOR FLASH
 100/10Mbps Ethernet interface based on DP83848 ETH-PHY
 On-board ISP1301 USB OTG transceiver
 13.000 MHz and 32.768 kHz crystals for LPC3250
 32Kbyte I2C E2PROM for storing non-volatile parameters
 Buffered 16-bit data bus with voltage translation to external bus
(VCCEXT can be 1.4-3.6V)
 +3.3V powering
 200 pos expansion connector
(as defined in popular SO-DIMM industry standard), 0.6mm pitch
 Compact design with dimensions: 68 x 50 mm
Support Highlights




Access to Embedded Artists support page containing
o Schematics
o User’s Manual
o Sample software applications
o OEM Board Integration Guide
Supported by Developer’s Kit, see picture to right
Volume discount available
Customization service available for optimized high-volume design
Block Diagram of LPC3250 OEM Board
13MHz
32.768kHz
crystals
LPC3250
Adj VCORE
(LTC3447)
SPIFLASH
EthernetPHY
Parallel
NAND (3.3V)
USB OTG
transceiver
I2C-E2PROM
16-bit DDR
SDRAM
(1.8V)
Buffers
1.8V-to-VCCEXT
ETH, USB, I2C, GPIO, Buffered memory bus, power, etc.
NXP Partner
Embedded Artists is a partner of NXP. Together we give engineers an excellent base to work
from when creating advanced embedded systems. We have a close co-operation and know
everything there is to know about the NXP processors. Take advantage of our unique knowledge!
For further information, please contact: [email protected]
Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
Absolute Maximum Ratings
Parameter
Rating
VDD to GND (Supply voltage)
Digital/Analog Input/Output Voltage
Storage temperature
-0.2V to +4V
-0.2V to VDD+0.2V
-40°C to 100°C
Stress above these limits may cause permanent damage to the board.
Technical Data
Parameter
VCC Supply voltage
Ripple with frequency contents < 100kHz
Ripple with frequency contents ≥ 100kHz
VCCEXT Supply voltage
Supply current
- idle, 32kHz RTC active
- low-power mode (13 MHz)
- executing from internal SRAM (266 MHz)
- executing from external SDRAM (266MHz)
- Ethernet+usb active
VBAT current
Operating temperature[1]
- 208 MHz core frequency
- 266 MHz core frequency[2]
Relative Humidity (RH)
0°C < TA ≤ 50°C, non-condensing
50°C < TA ≤ 60°C, non-condensing
60°C < TA ≤ 70°C, non-condensing
Min
Typical
Max
3.10V
3.30V
3.50V
50mV
10mV
3.60V
Max observed
1.40V
TBD
TBD
TBD
TBD
TBD
TBD
0°C
5°C[3]
60°C
40°C[3]
5%
5%
5%
80%
50%
35%
[1]
Extended temperature range can be supplied on request. Subject to minimum order volume.
Requires VDDcore to be 1.35V.
[3] Temperature range planned to be extended after passing Embedded Artists internal qualification process.
[2]
Mechanical Dimensions
Board width according to SO-DIMM standard: 67.6 mm. Board height (top and bottom) according to picture below:
2.6 mm
Top side components
4.8 mm
Bottom side components
1.2 mm
50.0 mm
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can
discharge without detection. Although this product features ESD protection damages may
occur on devices subjected to high energy ESD. Therefore, proper ESD precaution should be
taken to avoid performance degradation or loss of functionality.
Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
Pin Information
Note that each LPC3250 pin can have more functions than indicated in table below. See datasheet for details.
SODIMM
pins
1
2
3
4
5
6
7
8
9
10
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
I/O, Application Details
Connected to
A, Ethernet TXP
A, Ethernet RXP
A, Ethernet TXN
A, Ethernet RXN
P, VDD3_3A
P, GND
OD, ETH-LED1
OD, ETH-LED2
P, VBAT-IN
O, ONSW
I, RESET-IN
O, RESET-OUT
I, ETH-PHY-PD
I, DBGEN
I, TCK
O, RTCK
I, TRST
I, TMS
I, TDI
O, TDO
P, V3A
NC
P, VSSA
P, GND
O, GPO
O, GPO
O, GPO
O, GPO
O, GPO
O, GPO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
I, GPI
I, GPI
P, VCC
P, GND
P, VCC
P, GND
NC
A, USB2-DP
NC
A, USB2-DM
O
O
O
I, GPI
O
I, GPI
O, GPO
Ethernet-PHY
Ethernet-PHY
Ethernet-PHY
Ethernet-PHY
Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Ethernet-PHY
Ethernet-PHY
LPC3250, RTC powering
LPC3250,ONSW
LPC3250, RESET via buffer
LPC3250, RESOUT
Ethernet-PHY, power down
LPC3250, dbgen
SPIFI
CS control
LPC3250,
jtag-tck
LPC3250, jtag-rtck
LPC3250, jtag-trst
LPC3250, jtag-tms
LPC3250, jtag-tdi
LPC3250, jtag-tdo
LPC3250, vdda
LPC3250, vssa
LPC3250, GPO_10
LPC3250, GPO_12
LPC3250, GPO_13
LPC3250, GPO_15
LPC3250, GPO_16
LPC3250, GPO_18
LPC3250, P0.2
LPC3250, P0.3
LPC3250, P0.4
LPC3250, P0.5
LPC3250, GPI_01
LPC3250, U7_HCTS
LPC3250, USB-D+
LPC3250, USB-DLPC3250, GPO_06
LPC3250, PWMOUT2
LPC3250, U6_IRTX
LPC3250, U6_IRRX
LPC3250, U5_TX
LPC3250, U5_RX
LPC3250, GPO_02
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
SODIMM
pins
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
I/O, Application Details
P, GND
P, GND
B
B
B
B, GPIO
B, GPIO
I, GPI
B, I2C-SDA
O, I2C-SCL
I, GPI
I, GPI
A
I
O
B, GPIO
B, GPIO
B, GPIO
I, GPI
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
O, GPO
O, GPO
P, GND
P, GND
O, Buffered Address bus 15
O, Buffered CS3
O, Buffered Address bus 14
O, Buffered CS2
O, Buffered Address bus 13
O, Buffered CS1
O, Buffered Address bus 12
O, Buffered CS0
O, Buffered Address bus 11
O, Buffered BLS1
O, Buffered Address bus 10
O, Buffered BLS0
O, Buffered Address bus 9
O, Buffered WE
O, Buffered Address bus 8
O, Buffered OE
O, Buffer Address bus 7
O, Buffer Address bus 23
O, Buffer Address bus 6
O, Buffer Address bus 22
O, Buffer Address bus 5
Connected to
LPC3250, I2S1TX_CLK
LPC3250, I2S1TX_SDA
LPC3250, I2S1TX_WS
LPC3250, P0.0
LPC3250, P0.1
LPC3250, GPI_00
LPC3250, I2C2_SDA
LPC3250,I2C2_SCL
LPC3250, GPI_04
LPC3250, GPI_06
ISP1301, USB_ID
LPC3250, POWER_ON Vcore
LPC3250, TST_CLK2
LPC3250, P2.7
LPC3250, GPIO_00
LPC3250, GPIO_01
LPC3250, GPI_07
LPC3250, P2.0
LPC3250, P2.1
LPC3250, P2,2
LPC3250, P2.3
LPC3250, P2.4
LPC3250, P2.5
LPC3250, P2.6
LPC3250,GPO_07
LPC3250,GPO_21
LPC3250, A15 via buffer
LPC3250, CS3 via buffer
LPC3250, A14 via buffer
LPC3250, CS2 via buffer
LPC3250, A13 via buffer
LPC3250, CS1 via buffer
LPC3250, A12 via buffer
LPC3250, CS0 via buffer
LPC3250, A11 via buffer
LPC3250, BLS1 via buffer
LPC3250, A10 via buffer
LPC3250, BLS0 via buffer
LPC3250, A9 via buffer
LPC3250, WE via buffer
LPC3250, A8 via buffer
LPC3250, OE via buffer
LPC3250, A7 via buffer
LPC3250, A23 via buffer
LPC3250, A6 via buffer
LPC3250, A22 via buffer
LPC3250, A5 via buffer
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development – made Easy™
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
O, GPO
O, GPO
O, GPO
O
O
O
I, GPI
I
O, GPO
O, GPO
O
O, GPO
B
B
O, GPO
O, GPO
A
A
A
A
A
O, GPO
B, I2C-SDA
B, I2C-SCL
P, GND
P, GND
B
B
O, GPO
B
B
B
B
B, GPIO
O, GPO
I, GPI
B, GPI
O
B, GPIO
B, GPIO
O, GPO
B
B
B, GPI
B, GPIO
B
A
I, GPI
100
O, GPO
LPC3250, GPO_03
LPC3250, GPO_08
LPC3250, GPO_09
LPC3250, PWMOUT1
LPC3250, HICORE
LPC3250, U1_TX
LPC3250, U1_RX
ISP1301, USB_VBUS_CTRL
LPC3250, GPO_17
LPC3250, GPO_20
LPC3250, SPI1_CLK
LPC3250, GPO_04
LPC3250, SPI1_DATIN
LPC3250, SPI1_DATIO
LPC3250, GPO_05
LPC3250, GPO_11
LPC3250, TS_XP
LPC3250, TS_YP
LPC3250, AIN1
LPC3250, AIN2
LPC3250, AIN3
LPC3250, GPO_00
LPC3250, I2C1_SDA
LPC3250, I2C1_SCL
LPC3250, MCICLK
LPC3250, MCICMD
LPC3250, GPO_01
LPC3250, MCIDAT0
LPC3250, MCIDAT1
LPC3250, MCIDAT2
LPC3250, MCIDAT3
LPC3250, GPIO_05
LPC3250, GPO_14
LPC3250, GPI_03
LPC3250, U7_RX
LPC3250, U7_TX
LPC3250, P0.6
LPC3250, P0.7
LPC3250, GPO_22
LPC3250, SYSCLKEN
LPC3250, SPI2_DATIO
LPC3250, SPI2_DATIN
LPC3250, GPIO_04
LPC3250, SPI2_CLK
ISP1301, USB_VBUS
LPC3250, GPI_02
LPC3250, GPO_19 connected
to NAND flash WP
I/O legend
O: output
I: input
B: Bidirectional
P: Power
A: Analog
Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Document status: Preliminary
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
O, Buffer Address bus 21
O, Buffer Address bus 4
O, Buffer Address bus 20
O, Buffer Address bus 3
O, Buffer Address bus 19
O, Buffer Address bus 2
O, Buffer Address bus 18
O, Buffer Address bus 1
O, Buffer Address bus 17
O, Buffer Address bus 0
O, Buffer Address bus 16
NC
I, ABUF_EN
P, Buffer-VCC
P, GND
B, Buffer Data bus 15
I, GPI
B, Buffer Data bus 14
O, GPO
B, Buffer Data bus 13
I, GPI
B, Buffer Data bus 12
I, GPI
B, Buffer Data bus 11
B, GPIO
B, Buffer Data bus 10
B, GPIO
B, Buffer Data bus 9
B, GPIO
B, Buffer Data bus 8
B, GPIO
B, Buffer Data bus 7
B, GPIO
B, Buffer Data bus 6
I, GPI
B, Buffer Data bus 5
O
B, Buffer Data bus 4
I, GPI
B, Buffer Data bus 3
I, GPI
B, Buffer Data bus 2
I, GPI
B, Buffer Data bus 1
I, GPI
B, Buffer Data bus 0
O
P, Buffer-VCC
200
P, GND
LPC3250, A21 via buffer
LPC3250, A4 via buffer
LPC3250, A20 via buffer
LPC3250, A3 via buffer
LPC3250, A19 via buffer
LPC3250, A2 via buffer
LPC3250, A18 via buffer
LPC3250, A1 via buffer
LPC3250, A17 via buffer
LPC3250, A0 via buffer
LPC3250, A16 via buffer
Connected to GND on board
LPC3250, D15 via buffer
LPC3250, GPI_08
LPC3250, D14 via buffer
LPC3250, GPO_23
LPC3250, D13 via buffer
LPC3250, GPI_09
LPC3250, D12 via buffer
LPC3250, GPI_19
LPC3250, D11 via buffer
LPC3250, P2.8
LPC3250, D10 via buffer
LPC3250, P2.9
LPC3250, D9 via buffer
LPC3250, P2.10
LPC3250, D8 via buffer
LPC3250, P2.11
LPC3250, D7 via buffer
LPC3250, P2.12
LPC3250, D6 via buffer
LPC3250, GPI_28
LPC3250, D5 via buffer
LPC3250, U2_TX
LPC3250, D4 via buffer
LPC3250, GPI_17
LPC3250, D3 via buffer
LPC3250, GPI_05
LPC3250, D2 via buffer
LPC3250, GPI_16
LPC3250, D1 via buffer
LPC3250, GPI_18
LPC3250, D0 via buffer
LPC3250, U3_TX
OD: Open-drain output
GPIO: General purpose I/O
GPI: General purpose input
GPO: General purpose output
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC3250 OEM Board v1.5 DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
Disclaimers
Embedded Artists reserves the right to make changes to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
Customer is responsible for the design and operation of their applications and products using Embedded Artists’ products,
and Embedded Artists accepts no liability for any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Embedded Artists’ product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks associated with their applications and products.
Embedded Artists does not accept any liability related to any default, damage, costs or problem which is based on any
weakness or default in the customer’s applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using
Embedded Artists’ products in order to avoid a default of the applications and the products or of the application or use by
customer’s third party customer(s). Embedded Artists does not accept any liability in this respect.
Embedded Artists does not accept any liability for erratas on individual components.
All Embedded Artists’ products are sold pursuant to Embedded Artists’ terms and conditions of sale:
http://www.embeddedartists.com/sites/default/files/docs/General_Terms_and_Conditions.pdf
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If
any part of this document refers to any third party products or services it shall not be deemed a license grant by Embedded
Artists for the use of such third party products or services, or any intellectual property contained therein or considered as a
warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property
contained therein.
UNLESS OTHERWISE SET FORTH IN EMBEDDED ARTISTS’ TERMS AND CONDITIONS OF SALE EMBEDDED
ARTISTS DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF
EMBEDDED ARTISTS PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF
ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY THE CEO OF EMBEDDED ARTISTS, PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, NUCLEAR, LIFE
SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR
MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL
DAMAGE.
Resale of Embedded Artists’ products with provisions different from the statements and/or technical features set forth in this
document shall immediately void any warranty granted by Embedded Artists for the Embedded Artists’ product or service
described herein and shall not create or extend in any manner whatsoever, any liability of Embedded Artists.
This document as well as the item(s) described herein may be subject to export control regulations. Export might require a
prior authorization from national authorities.
Definition of Document Status
Preliminary – The document is a draft version only. The content is still under internal review and subject to formal approval,
which may result in modifications or additions. Embedded Artists does not give any representations or warranties as to the
accuracy or completeness of information included herein and shall have no liability for the consequences of use of such
information. The document is in this state until the product has passed Embedded Artists product qualification tests.
Approved – The information and data provided define the specification of the product as agreed between Embedded Artists
and its customer, unless Embedded Artists and customer have explicitly agreed otherwise in writing.
Embedded Artists AB
Södra Promenaden 51
SE-211 38 Malmö
Sweden
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php