MX-E750
MX-E751
MX-E760
MX-E761
MX-E770
MX-E771
MINI-Compact System
MP3-CD/WMA-CD/CD-R/RW Playback
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Downloaded From Disc-Player.com Samsung Manuals
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage” inside CAUTION : TO PREVENT ELECTRIC SHOCK, This symbol indicates important instructions
the product that presents a risk of electric shock or MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY accompanying the product.
personal injury.
INSERT.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
• The Mains plug is used as a disconnect device and shall
stay readily operable at any time.
• This apparatus shall always be connected to an AC outlet
with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
• INVISIBLE
LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Accessories
Check for the supplied accessories below.
FM Antenna (Optional)
FM/AM Antenna (Optional)
User's Manual
Toroidal Ferrite core ( 1 EA)
(For Power cable) (Optional)
Remote Control/
Batteries(Optional)
Connector-Adaptor
(Optional)
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
• An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried out.
Symbols
2
Important
Downloaded From Disc-Player.com Samsung Manuals
English
Note
Precautions
• Ensure that the AC power supply in your house complies
with the identification sticker located on the back of your
product.
• Install your product horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7.5~10cm).
• Do not place the product on amplifiers or other equipment
which may become hot. Make sure the ventilation slots are
not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert Hole is
empty.
• In order to disconnect the product completely from the
power supply, remove the AC plug from the wall outlet,
especially when left unused for a long period of time.
• During thunderstorms, disconnect the AC plug from the wall
outlet. Voltage peaks due to lightning could damage the
product.
• Do not expose the product to direct sunlight or other heat
sources. This could lead to overheating and malfunction of
the product.
• Protect the product from moisture, and excess heat or
equipment creating strong magnetic or electric fields (i.e.
speakers.).
• Disconnect the power cable from the AC supply if the
product malfunctions. Your product is not intended for
industrial use.
• Use of this product is for personal use only.
• Condensation may occur if your product or disc has been
stored in cold temperatures. If transporting the product
during the winter, wait approximately 2 hours until the
product has reached room temperature before using.
• The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.
• Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.
• Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.
• Direct the loudspeakers towards the listening area.
Disc Storage
• Do not keep in direct sunlight
• Keep in a cool ventilated area
• Keep in a clean Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the outside of
the disc
• Condensation may form if warm air comes into contact
with cold parts inside the product. When condensation
forms inside the product, it may not operate correctly. If this
occurs, remove the disc and let the product stand for 1 or 2
hours with the power on.
Disc Types And Disc Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minutes as they
may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If
the session is closed but the disc is left open, you may not
be able to fully play the disc.
CD-R MP3 Discs
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture
quality or cause skipping.
Be especially careful not to scratch discs when handling
them.
Holding discs
• Do not touch the playback side of the disc.
• Hold the disc by the edges so that fingerprints will not get
on the surface.
• Do not stick paper or tape on the disc.
Downloaded From Disc-Player.com Samsung Manuals
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format
can be played.
• MP3 file names should contain no blank spaces or special
characters (. / = +).
• Use discs recorded with a compression/decompression
data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be
played.
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback
and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files
encoded in both low bit rate and high bit rate (e.g., 32Kbps
~ 320Kbps), the sound may skip during playback.
• A maximum of 999 tracks can be played per CD.
• Supported Audio Formats:WMA 56~128kbps Bit rate.
English
2
3
Contents
Thank you for buying this SAMSUNG mini-compact system.
Please take time to read these instructions.
They will allow you to operate your system with ease and take full advantage of its features.
Safety Warnings........................................ 2
Programmed Tracks................................. 9
Accessories............................................... 2
Auto Change function............................... 9
Precautions............................................... 3
Playing USB............................................ 10
Cautions on Handling and
To Select a Track from USB Device. 10
Storing Discs............................................. 3
To Search a Folder Quickly............... 10
Disc Types And Disc Format.................... 3
To repeat............................................ 10
Contents.................................................... 4
To Use High Speed Search............... 10
Description................................................ 4
To delete a file.................................... 10
Top Panel(MX-E760/E761/E770/E771 only)...... 4
To skip next 10 tracks....................... 10
Front Panel........................................... 5
Setting the Clock.................................... 11
Rear Panel............................................ 6
Timer Function........................................ 11
Remote Control................................... 7
Cancelling the Timer............................... 11
Attaching the toroidal ferrite core to the
Power cable (optional).............................. 7
Listening a Radio.................................... 12
Display function........................................ 7
Recording Function................................ 12
CD/MP3/WMA-CD Playback................... 8
Recording Speed.................................... 13
Selecting a Track....................................... 8
GIGA SOUND function............................ 13
Searching for a Specific Music
Selecting EQ Mode................................ 13
Passage on a CD...................................... 8
Selecting USER EQ Mode...................... 13
Repeat One or All Tracks on the
Using the DYNAMIC SPOT Mode.......... 13
Compact Discs.......................................... 8
Using the Stadium Mode........................ 14
A-B Repeat Playback............................... 9
Party Function......................................... 14
10 Skip Function....................................... 9
Connecting Microphone......................... 14
CD Programming...................................... 9
Troubleshooting...................................... 14
Checking or Editing the
Specifications.......................................... 15
Selecting a Stored Station...................... 12
Description
Top Panel (MX-E760/E761/E770/E771 only)
1. LED LIGHTING control
2. LED LIGHTING
1
2
You can switch the LED mode to your preference.
Each time you press the LED LIGHTING button on main unit, the LED
mode will change as following:
OFF ; MODE 1 ; MODE2
• If you select the LED OFF, all of the LED Lightings will turn off.
• If you select the MODE 1, the front LED will turn on and the top LED
LIGHTING will turn off.
• If you select the MODE 2, the front LED will turn on and the top LED
LIGHTING will turn on.
4
Downloaded From Disc-Player.com Samsung Manuals
English
Description
Front Panel
1
2
29
28
3
27
MX-E760/E761
MX-E770/E771
Only 4
MX-E760/E761
26 MX-E770/E771
Only
5
6
25
7
23
8
22
24
9
10
21
20
11
12
13
14
15
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
POWER button
• Press this button to switch your mini-compact system.
PARTY button (only for MX-E750/MX-E751) LED LIGHTING button (only for MX-E760/MX-E761/ MX-E770/MX-E771)
AUTO CHANGE button (only for MX-E750/MX-E751)
PARTY button (only for MX-E760/MX-E761/ MX-E770/MX-E771)
MASTER VOLUME button
EQ button
Search/Skip button
STOP/Tuning Mode button
RETURN button
DELETE button
USB 1 button
MP3/CD button
TUNER/AUX button
USB 1 jack
MIC jack
Disc Tray
REC SPEED
AUX IN 1 jack
Connecting an External Component such as an MP3
player.
• Connect AUX IN 1 on the front panel of the MINI
COMPACT to the Audio Out of the external component/
Downloaded From Disc-Player.com Samsung Manuals
19
18
17
16
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
MP3 player.
• Press the TUNER/AUX button to select the AUX 1 input.
You can select AUX 1 by pressing the FUNCTION button
on the remote control.
USB 2 REC jack
USB 2 REC button
OPEN/CLOSE button
USB 2 button
ENTER button
PLAY/PAUSE button
Search/Skip button
USER EQ button
Window display
STADIUM button (only for MX-E750/MX-E751)
AUTO CHANGE button (only for MX-E760/MX-E761/ MX-E770/MX-E771)
DYNAMIC SPOT button
GIGA SOUND BLAST button
English
4
5
Rear Panel
MX-E750/E751/E760/E761
1. 2.1CH Speaker Connector Terminals
(MX-E750/E751/E760/E761)
4.2CH Speaker Connector Terminals
(MX-E770/E771)
The speakers connector terminals are located on the
rear of the system.
1. To achieve the correct sound quality, insert those
speaker connector cables to the speaker connector terminals of the system.
• Left speaker (marked L).
• Right speaker (marked R).
MX-E760/E761
Only
1
2
2. ONLY FOR SERVICE
3
3. AUX IN 2 Terminals
• This jack is just for testing, please don't use it.
1. Use the Audio Cable (not supplied) to connect
AUX IN 2 on the product to Audio Out on the
external analog component.
• Be sure to match connector colors.
• If the external analog component has only one
Audio Out jack, connect either left or right.
4
4
5
• Press the TUNER/AUX button to select the AUX 2
input.
• You can select AUX 2 by pressing the FUNCTION
button on the remote control.
MX-E770/E771
4. FM/AM(optional) Antenna Connector
Terminal
The position of FM antenna connector terminal may
differ depending on your region.
This product may not support the AM function
depending on your region.
☛☛ If this product does not receive AM broadcasts.
Connect the FM antenna:
1. Connect the FM antenna (optional) to the FM
Antenna jack.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
3. If reception is poor, you may need to install an
outdoor antenna. To do so, connect an outdoor
FM antenna to the FM socket on the rear of the
system using a 75Ω coaxial cable (not supplied).
If this product can receive AM broadcasts. (Optional)
1
2
3
☛☛
Connect the FM/AM antenna:
4
4
1. Plug the connector on the FM/AM antenna
(optional) into the FM/AM terminal on the rear
of the system.
5
5. Voltage Selector (Optional)
Check the position of the voltage selector on the rear
of the system(optional).
This product may not support the Voltage Selector
function depending on your region.
6
6. Cooling fan (MX-E770/E771 only)
The fan always turns when the power is on. Secure a minimum 10 cm of clear space from all sides of the fan
when installing the product.
6
Downloaded From Disc-Player.com Samsung Manuals
English
Remote Control
33
1
32
2
3
1.
2.
3.
4.
31
During playback,
press the desired
track number. The
selected track is
played.
4
5
6
30
29
7
8
9
10
11
12
13
14
15
16
17
18
28
27
26
25
24
23
22
21
20
19
POWER
DISPLAY
USB
Number(0~9) button
5.
6.
7.
8.
9.
10.
-10
Skip, RDS PTY *
STOP
PLAY
DELETE
SOUND
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
ENTER
VOLUME TUNING/ALBUM .
MO/ST
TIMER ON/OFF
TIMER SET
SLEEP
Set a sleep time
to shut off the
product.
MY KARAOKE
MIC VOLUME -, +
REPEAT A-B
REPEAT
TUNING MODE
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
VOLUME +
TUNING/ALBUM ,
EQ
CD REC SPEED
USB REC
PAUSE
SEARCH, RDS DISPLAY*
+10
CD DISC SKIP*
FUNCTION
MUTE
Turn off the sound
temporarily.
* This product is not used the RDS PTY and RDS DISPLAY function printed
the [, ) button above.
* This product is not used the DISC SKIP function printed the CD button above.
Installing batteries in the Remote Control
`` Place batteries in the remote control
so they match the polarity : (+) to (+)
and (–) to (–).
`` Always replace both batteries at the
same time.
`` Do not expose the batteries to heat
or a flame.
`` The remote control can be used up
to approximately 23 feet (7 meters) in
a straight line.
Attaching the toroidal ferrite core to
the Power cable (optional)
If you attach a Toroidal ferrite core to the Power
cable, it will help to prevent RF interference from
radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open
it.
2. Attach the Toroidal ferrite core to the Power cable
as shown and press it until it clicks.
Installing Toroidal ferrite to Power cable
Lift up to release the lock and open the core.
* Battery size: AAA
Display function
You can view all functions available on the display,
adjust the brightness of the display and select the
Display/LED either on or off.
Each time you press the DISPLAY button on the
remote control, the display mode will change as following:
◆◆ The Demo function
All functions available on the system appear on the
front panel display.
◆◆ The Dimmer function
The Dimmer function is selected and the display
darkens.
◆◆ LED OFF
The LED is turned off while the dimmer function .
is working.
◆◆ Clock ON
The Clock you set is displayed.
◆◆ LED/Display ON
ALL Display and LED turned on.
Make two rounds on the coil with the cable.
Press to lock it back
Downloaded From
Disc-Player.com Samsung Manuals
English
6
7
CD/MP3/WMA-CD Playback
You can play 12 cm compact disc without an adapter.
☛☛This product is designed to play an audio CD, CD, CD-R, CD-RW, MP3/WMA-CD.
• G
ently open or close the CD tray and do not apply
excessive force.
• Do not put force or place a heavy object on the product.
• Do not insert an out-of-spec. shape of CD such as a
heart or octangle shaped CD. Otherwise, the product
may be damaged.
• Care must be taken about maintenance of the compact
discs.
1. Press
the OPEN/CLOSE button to open the disc tray.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the OPEN/CLOSE button to close the disc tray,
the disc will be played automatically.
• For MP3/WMA-CD audio, it may take several minutes
to complete scanning the disc tracks.
• If you play a file with an English name or a MP3/WMACD medium in an English title, the song title will be
shown in the display. (Other languages besides English
may not be indicated.)
• An English-titled track containing a special character
will not show the title in the display.
<CD/MP3/WMA-CD PlaybackDisplay>
Track Indicator
Playtime Indicator
4. A
djust the volume according to needs with the
following procedures.
• Tuning the VOLUME knob.
• Press the Vol + or – button of the remote control.
The volume level can be adjust in 31 steps(VOLUME
MIN, VOLUME01- VOLUME 29, and VOLUME MAX).
5. Main Unit
To pause playback temporarily, press the p button.
Press p again to continue playing the disc.
Remote control
To pause playback temporarily, press the PAUSE(#)
button.
Press PLAY(+) button to continue playing the disc.
6. To end playing, press the STOP (@) button.
• If there is not one CD inserted in the DISC tray, it is indicated as
“NO DISC”.
• The quality of MP3/WMA-CD playback may vary depending
on the condition of the disc containing the music files or the
condition of the recorder with which the disc was created.
• If different types of files or unnecessary folders are on the same
disc, you will have problems with playback.
• Keep the tray closed whenever you are not using it, to prevent
dust from entering.
• You can load or unload compact disc when the radio, usb or
auxiliary source function is selected, and when you press the
OPEN/CLOSE button, all of the other functions will be changed
to MP3/CD mode.
• If no buttons are pressed on the product or remote control for
more than 3 minutes when the product is in Pause mode, it will
be changed to Stop mode.
• If no buttons are pressed on the product or remote control for
more than 25 minutes when the product is in Stop mode, the
power will automatically turn off.
8
Downloaded From Disc-Player.com Samsung Manuals
English
Selecting a Track
You can select a desired track while the disc is
being played.
To play the previous track
Press the [ button within 3 seconds after the current
track started playing.
Press the [ button twice at least 3 seconds after the
current track started playing.
To play the next track
Press the ] button.
To play the current track
Press the [ button 3 seconds later after the current
track started playing.
To play the track of your choice
Press the [ or ] button to move to a desired track.
• You can also use the Number(0~9) button on the
remote control to select a track.
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a specific music passage on a track.
To search for...
Press ...
Forwards..................................... )
Backwards................................... (
You can also press and hold the [, ] button on
the main unit to automatically scan for a track.
Repeat One or All Tracks on the
Compact Discs
You can repeat playing CD unlimitedly:
• CD containing a specific track.
• Whole tracks of a selected CD.
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as following:
MP3: OFF➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
CD: OFF➝ TRACK ➝ ALL ➝ RANDOM
2. When you wish to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected
folder.
• ALL: Repeatedly plays the entire disc.
• RANDOM : Plays tracks in random order.
A-B Repeat Playback
You can repeatedly play back a designated section
of a CD.
1. Press the REPEAT A-B button at the beginning
of desired part.
• 'RPT A' will be displayed.
2. Press the REPEAT A-B button at the ending of
desired part.
• 'RPT AB' will be displayed.
3. To cancel REPEAT A-B function, press the
REPEAT A-B button again.
• 'OFF' will be displayed.
REPEAT A-B function is available within a track.
➣➣
10 Skip Function
Press the +10 or -10 button while in playback mode.
This will skip the tracks as many as 10 or -10 from
the current track.
CD Programming
This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
Checking or Editing the
Programmed Tracks
You can check a list of programmed tracks and
edit them as you want.
1. If a programmed track is being played, press the
STOP (@) button once.
2. Press the ENTER (
the message below:
) button twice to display
(C=Check, 01= program number)
➣➣If a total of 24 tracks are already programmed, “C” will be displayed rather
than “P” in the display.
3. Repeat pressing the ENTER (
the desired track is displayed.
) button until
4. Press the [ or ] button to select a different
track.
5. Press the ENTER (
selection.
) button to confirm your
6. To play the programmed tracks, press the
PLAY (+) button.
Auto Change Function
• However, you must stop playing the CD before
selecting tracks.
You can circularly play between the disc and the USB.
1. W
hile in CD playback mode, press the STOP(@)
button to stop playing the CD.
1. Press the AUTO CHANGE button on the main unit.
Each time press this button, the mode will switch as
following:
2. Press the ENTER (
message below:
) button to display the
(01= program number, --= track number)
3. Use the [ or ] button to move to a desired
track.
• Press [ to move to the previous track.
• Press ] to move to the next track.
4. Press the ENTER (
) button to confirm your
selection, the selection is stored and
is displayed.
5. To select a different track, following the steps 3 to 4 above.
6. Press the PLAY (+) button to play the
programmed tracks.
7. Press the STOP(@) button to stop playing the
programmed tracks, Press the STOP (@) button
again to cancel playing the programmed tracks.
AUTO CHANGE OFF ; AUTO CHANGE ON
• When the auto change mode is "ON", the music will
be played on DISC➝USB1➝USB2 continuously.
• When the auto change mode is "ON", if you press
the POWER button, function change button or the
OPEN/CLOSE button, the auto change function
automatically switches to "OFF" mode.
• When USB is playing, if you disconnected the USB,
the auto change function automatically switches to
"OFF" mode.
• When the auto change mode is "ON", the recording
can't work.
• When the auto change mode is "ON", the REPEAT,
SLEEP function can't work and automatically changes
to OFF.
• When the auto change mode is "ON", the REC
SPEED, USB 2 REC, REPEAT, PROGRAM, DELETE
and SLEEP function can't work.
• If there's no USB 1, it will jump to USB 2.
• If there's no USB 2, it will jump to DISC or USB 1.
• If you open the disc tray or turn off the
product, your programming will be canceled.
Downloaded From Disc-Player.com Samsung Manuals
English
8
9
Playing USB
Connect an external storage device such as USB
flash memory or external HDD (Hard Disk Drive)
to the product. You can play files in MP3/WMA
format.
Before you begin! • Connect the external USB storage device to your product.
• Select the USB mode by pressing the USB 1 or USB 2
button on the main unit or select the USB 1 or USB 2 by
pressing the FUNCTION button on the remote control.
• The first track of the first directory plays automatically, and
the play order is as below:
If you select USB1, USB1 ➝ STOP.
If you select USB2, USB2 ➝ STOP.
To Use High Speed Search
You can search the desired section quickly during
the play.
the (,) button.
➣➣•Press
Each time you press the button, you will move
forward/backward fast.
☛☛The sound will not output in fast playback mode.
To delete a file
You can delete a file on your USB device.
1. Play a file you want to delete.
2. Press the DELETE button.
➣➣To stop playing
3. Press [,] on the remote control to select YES.
• To cancel the selection, press the RETURN button on
the main unit.
➣➣To remove the USB device
4. Press the ENTER button on the remote control.
The selected file will be deleted.
Press the STOP ( @ ) button to stop playing.
If you press the STOP ( @ ) button once
again, you can remove the USB device safely.
☛☛Do not connect a USB recharger to the USB port
of this product. Otherwise, the product may be
damaged.
To Select a Track from USB Device
You can select an MP3 file during the play.
f you want to move the next/previous(track), press the
➣➣I[,]
buttons shortly.
• It moves the next/previous file within the directory.
• If you press the [,] buttons more times than the
number of the files in the directory, it will move over to
the next directory.
To Search a Folder Quickly
1. P
ress the TUNING/ALBUM button on the remote
control to move to the previous/next folder.
2. When the searching is done, you will see the previous/
next folder name. The track will start playing.
To repeat
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the repeat
mode will change as following:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2. W
hen you wish to stop the Repeat function, press the
REPEAT button until "OFF" is displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
10
Downloaded From Disc-Player.com Samsung Manuals
English
☛☛The NTFS file system is not supported.
To skip next 10 tracks
1. Press the +10 or -10 button while in playback
mode.
This will skip the tracks as many as 10 or -10
from the current track.
Read through the instructions below before using
the USB storage
• Some USB devices may not work properly with this
product.
• This product supports only an external HDD that is
formatted in FAT file system.
• USB 2.0 HDD should be connected to a separate power
source. Otherwise, the USB 2.0 HDD will not work at all.
• If an USB external storage is connected to multiple
devices, only the MP3 files in the first HDD will be played.
• DRM-applied files are not supported. Digital Right
Management:This will restrict unauthorized access to a
DRM file so that the copyright of the file is protected from
piracy.
• Even if the extension of the file is .mp3, the file cannot be
played if it is formatted in MPEG layer1 or 2.
• Do not use an unrecognized USB hub.
• Only the first 15 characters of a MP3/WMA file are
displayed.
• Only removable HDDs with less than 160GB are
supported. Depending on the device, a 160GB- or more
removable HDD may not be supported.
• It will take several minutes to recognize the files in the
selected USB device.
• The USB device (USB HDD, in particular) may cause a
delay to move to the next track.
• The USB storage supporting only USB VER1.1 may
perform a slow access or may not recognize the file
properties.
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
(
) button.
2. Press the TIMER SET button and then press the
ENTER (
) button, "CLOCK" is displayed.
3. Press the ENTER (
) button, the hour flashes.
• Increase the hours: ,
• Decrease the hours: .
4. When the correct hour is displayed, press the
ENTER (
) button, the minutes flashes.
• Increase the minutes: ,
• Decrease the minutes: .
5. When the correct minute is displayed, press the
ENTER (
) button, " TIME" appears in the
display.
• The current time is now set.
• You can display the time, even when you are using
another function, by pressing the TIMER SET button
once.
• You can also use ] or [ on the front panel instead
of TUNING/ALBUM , or . button in step 3,4.
Timer Function
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, check that the current time
is correct.
• For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
• If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
Example: You wish to wake up to music every morning.
1. Switch the system on by pressing the POWER (
)
button.
2. Press the TIMER SET button until TIME is displayed.
3. Press the ENTER (
) button.
Result: ON is displayed for a few seconds, you can
set the timer switch-on time.
4. Set the timer switch-on time.
a
b
c
d
ress the TUNING/ALBUM , or . button to P
set the hours.
Press the ENTER (
) button.
Result: The minutes flash.
Press the TUNING/ALBUM , or . button to set the minutes.
Press the ENTER (
) button.
Result: O
FF is displayed for a few seconds, you can
now set the timer switch-off time.
5. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to set the hours.
b Press the ENTER (
) button.
Downloaded From
Disc-Player.com
Samsung Manuals
Result:
The minutes flash.
Press the TUNING/ALBUM , or . button to set the minutes.
d Press the ENTER (
) button.
Result: V
OL XX is displayed, where XX corresponds to the volume already set.
6. Press the TUNING/ALBUM , or . button to adjust
c
the volume level and press the ENTER (
)button.
Result: The source to be selected is displayed.
7. Press the TUNING/ALBUM , or . button to select
the desired source to be played when the system
switches on.
If you select...
You must also...
FM/AM (radio) . .......... a
P ress the ENTER (
) button.
b S
elect a preset station by
pressing the TUNING/ALBUM
, or . button.
CD/MP3 (compact disc) ........Load one compact disc.
USB1/USB 2..............Connect the USB device.
8. Press the ENTER (
) button.
Result: CHKREC (Do you want to record?) is displayed.
9. Press the ENTER (
) button.
Result: REC N is displayed, you can press the TUNING/ALBUM , or . button to select the REC Y or
REC N, and then press ENTER (
) button.
1)If you select the REC N, it will cancel tuner timing
recording even if you have already set the tuner timing
recording.
2)If you select the REC Y, you can set the tuner timing
recording.
) button.
a.Press the ENTER (
Result: ON is displayed for a few seconds, you can
set the tuner timing recording switch-on time.
) button.
b.Press the ENTER (
Result: OFF is displayed for a few seconds, you can
set the tuner timing recording switch-off time.
• The maximal tuner timing recording time is 5 hours.
• If the timer switch on and off times are identical, the word
ERROR is displayed.
• You may use ], [ buttons on the main unit to instead of
the TUNING/ALBUM , or . button to adjust in step 4 to 9.
• If the switch-on or -off time is the same as the timing recording
time, only the switch-on or -off time is effective, and the timing
recording time is not applied.
• If the auto timer is turned on,the MP3/CD or USB function
may require an additional step to be activated depending on
the disc(or device). So it is better for you to select the tuner
function instead.
Cancelling the Timer
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you
no longer wish to use the timer, you must cancel it.
To...
Press the TIMER ON/OFF button....
Cancel the timer .......... Once.
Result:
is no longer displayed.
Restart the timer .......... Twice.
Result:
is displayed again.
• When you select the TIMER OFF mode, the TIMER
RECORDING and TIME function are not available. English
10
11
Recording Function
Listening a Radio
You can store up to:
15 FM stations, 15 AM stations (optional).
You can record sound of the CD, the Radio Broadcasting or sound from the external source into the
USB storage device.
1. Select FM or AM by pressing the TUNER/AUX
button on the main unit.
You can select FM or AM by pressing the FUNCTION button on the remote control.
1. C
onnect the external USB storage device you want to
record to the USB 2 (
) on your product.
2. Play a Disc, adjust the Radio frequency or connect
the external source to your product.
CD
• Press the MP3/CD on the main unit to select the CD
function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use the CD selection ( [ or ] ) buttons to select the
desired song.
Tuner
2. To search for a station
Press TUNING MODE button
Preset.................... Once or more times until PRESET
is displayed.
You can search the stored frequencies in the Preset mode.
Manually ............... Once or more times until MANUAL
is displayed.
You can search the frequencies one
by one in the Manual mode.
3. Select the station to be stored by:
• Pressing the TUNING/ALBUM , or . button on the
remote control button to select the preset station.
• Press and hold the TUNING/ALBUM , or . button
on the remote control to automatically search for active
broadcasting stations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
• This applies only when listening to an FM station. 5. If you do not want to store the radio station found,
revert to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store any other radio frequencies required, repeat
Steps 3 to 4.
mode
➣➣In• Tuner
In the Manual mode, you can use [ or ] button on
the main unit to manual search a radio station.
• In the Preset mode, you can use [ or ] button on
the main unit to search a stored radio station.
Selecting a Stored Station
You can listen to a stored radio station as following:
1. Select FM or AM by pressing the TUNER/AUX button
on the main unit.
You can select FM or AM by pressing the FUNCTION
button on the remote control.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. Press [,] button on the main unit or TUNING/
ALBUM , , . on the remote control to select a
desired preset number.
12
Downloaded From Disc-Player.com Samsung Manuals
English
• Select TUNER by pressing the TUNER/AUX button
on the main unit.
• Adjust the Radio frequency you want to record.
External Source
• Connect an External Component/MP3 player to your
product.
• Press the TUNER/AUX button to select <AUX> input.
• Play a song from the external device.
USB 1
• Connect an USB to USB 1 jack of your product.
• Press the USB 1 button to select USB 1.
• Play a song from the USB 1.
3. P
ress the USB REC button on the remote control or the
USB 2 REC button on the main unit to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button on the remote
control or press and hold the USB 2 REC button on
the main unit to start recording the all tracks of Disc.
"FULL CD RECORDING" is displayed.
• If you play the MP3/WMA file, the file is copied into the
USB device totally. “CHECK FILE”“COPY xx”“COPY END” is displayed. When the recording is done, “STOP” will be
displayed.
• If there is the same file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORDING is displayed.
4. T
o stop recording, press the STOP (@) button and
then automatically create and save as the MP3 file.
5. To remove the USB device safely, press the STOP (@) button once again. After the recording, a directory
named “RECORDING”(CD), “CD COPY”(MP3 CD),
“TUNER RECORDING” or “AUX RECORDING” will be
created in your device.
• Do not disconnect the USB or the AC Cord during the
recording as this may cause file damage.
• If you disconnected USB device during the recording, the
main unit will be power off and you may not delete the
recorded file, In this case, please connect the USB device
to the PC and backup the USB data on the PC first and
then format the USB device.
Selecting EQ Mode
• When the USB memory is not enough, it will be displayed
“NOT ENOUGH MEMORY”.
• The recording works if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system is
not supported.)
• When you use CD high speed search function, the CD
recording can’t work.
• Sometimes, the recording time may be longer with some
USB devices.
• In the program mode, you can't use the CD recording
function.
• When the CD recording, the EQ and GIGA SOUND
functions can not work and automatically change to OFF.
• When the CD recording, the REPEAT function can not
work and automatically changes to OFF.
• If you use the MIC function during the CD recording, the
voice from the microphone will be recorded.
• You can not record the radio when searching or no
available frequencies in the Tuner mode.
• Note that setting the input level too loud when recording
music from an external device through the AUX and USB
channel may introduce noise into the recording. In that
case, lower the external device’s volume level.
Recording Speed
You can select the recording speed before recording.
Your mini-compact system supports the
predefined equalizer settings between high and
low frequencies to be in harmonious with the
current music genre.
1. Press the EQ button.
Each time you press this button, the sound mode will .
switch as following:
OFF;FLAT;RANCHA;SAMBA;CUMBIA;HABANA
;BOOMBA;REGGAE;PARTY;POP ;HIPHOP
;ROCK;JAZZ;CLASS;STA+EQ;DYN+S;MP3+
;VIR+S;U1 B 0 ; U2 B 0 ; U3 B 0
2. Set the BASS, MIDDLE, TREBLE level.
Press the ENTER button when you select the U1 B 0
; U2 B 0 ; U3 B 0
Result: The BASS level flash.
Press the TUNING/ALBUM , or . button to select
from -06 to 06.
Press the ENTER button.
Result: The MIDDLE level flash.
Press the TUNING/ALBUM , or . button to select
from -06 to 06.
Press the ENTER button.
Result: The TREBLE level flash.
Press the TUNING/ALBUM , or . button to select
from -06 to 06.
Press the ENTER button.
Result: setting is completed.
Selecting USER EQ Mode
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as following:
You can directly select the user EQ mode by press
the USER EQ button.
RECORD SPD x 1;RECORD SPD x 4
• While the Tuner or External Source is recording, the
recording speed does not supported.
• When you select RECORD SPD x 4, the audio sound will
not be output.
• If you connected the Microphone, you just have one recording
speed mode: RECORD SPD x 1.
• During recording, if you disconnect the Microphone, the
recording will stop, even if you reconnect the Microphone, it
will still stop.
1. Press
the USER EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode will switch as following:
OFF ; U1 B 0 ; U2 B 0 ; U3 B 0
GIGA SOUND function
The GIGA Sound Function amplifies bass and improves
bass twice as much for you to appreciate powerful real
sound.
2. You can refer the above to set the BASS, MIDDLE,
TREBLE level.
• When CD Recording, the EQ/USER EQ function can't work
and the EQ/USER EQ automatically switches to "OFF"
mode.
• If no buttons is pressed within 8 seconds, your settings will
automatically be cancelled and the previous settings will be
saved.
• The EQ mode may be different depending on your region.
Using the DYNAMIC SPOT Mode
1. P
ress the GIGA SOUND BLAST button on the
main unit or the SOUND button on the remote
control. Each time press this button, the sound will
switch as following:
You can directly select the Dynamic spot mode for
listening music.
ADAPTIVE ; OFF ; GIGA SOUND
2. T
o cancel this function, press the GIGA SOUND
BLAST button until the “OFF” is displayed.
1. Press the DYNAMIC SPOT button on the main unit.
Each time you press this button, the sound mode will
switch as following:
DYN+S ; OFF
• The GIGA SOUND mode may be different
depending on your region.
Downloaded From Disc-Player.com Samsung Manuals
• The DYNAMIC SPOT mode may be different
depending on your region.
English
12
13
Using the Stadium Mode
Party function
You can directly select the Stadium mode for
listening music. (MX-E750/E751 only)
1. Press the STADIUM button on the main unit.
Each time you press this button, the mode will switch .
as following: STA+EQ ; OFF
• The STADIUM mode may be different depending on your
region.
You can choose a desired party mode.
1. P
ress the PARTY button. Each time press this
button, the party mode will switch as following:
MX-E750/E751:
PARTY 1 ; PARTY 2 ; PARTY 3 ; OFF
MX-E760/E761/E770/E771:
PARTY 1 ; PARTY 2 ; PARTY 3
Connecting Microphone
You can also insert microphone to sing along with your favorite CDs.
1. Connect the microphone to the MIC jack on the front of the product.
`` If your microphone with a larger jack than 3.5ø MIC jack, you need a Connector-Adaptor(optional) to complete the connection.
• First, connect the Connector-Adaptor to the MIC jack on the front of the product,
• Second, connect the microphone (with larger jack) to the Connector-Adaptor.
2. Press the MIC VOL-, + button to adjust the volume of the microphone.
3. Press the MY KARAOKE button to suppress the Vocal. Each time the button is pressed, the selection is changed as follows:
MIN ➞ MAX ➞ OFF.
`` If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away from the speakers.
Turning down the microphone's volume or the speaker volume is also effective.
`` The microphone does not operate in the AUX, TUNER mode.
`` If you connect with the Microphone, GIGA SOUND will automatically turn off. Even if you remove the microphone, it will not turn on.
`` After setting my karaoke, EQ/GIGA SOUND does not work.
`` After the stop operation, the setting of my karaoke will disappear.
`` Only when connected with a Microphone, the MY KARAOKE function is available.
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing
is not listed below or if the instruction below does not help, turn off the unit, disconnect the power
cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback.
• Are the speakers connected properly? Is the speaker setup correctly
customized?
• Is the disc severely damaged?
• Is the remote control being operated within its operation range of angle
and distance?
• Are the batteries drained?
• The product is not working.
• While “NO DISC” message appears on the display of the product, press
(Example: The power goes out or
and hold the STOP (@) button on the main unit for longer than
the front panel key doesn't work
5 seconds with no disc (reset function).
or a strange noise is heard.)
Using the RESET function will erase all stored settings.
• The product is not working
Do not use this unless necessary.
normally.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
Downloaded From Disc-Player.com Samsung Manuals
The remote control does not
work.
14
English
Specifications
General
FM Tuner
AM Tuner
(optional)
CD Disc
Weight (MX-E750/E751)
Dimensions (MX-E750/E751)
Weight (MX-E760/E761)
Dimensions (MX-E760/E761)
Weight (MX-E770/E771)
Dimensions (MX-E770/E771)
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
CD : 12 cm (COMPACT DISC)
3.54 Kg
233 (W) x 351 (H) x 300 (D) mm
4.2 Kg
233 (W) x 373 (H) x 300 (D) mm
4.26 Kg
233 (W) x 373 (H) x 300 (D) mm
+5°C~+35°C
10 % to 75 %
55 dB
12 dB
0.6 %
35 dB
70 dB
4%
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
MX-E750/E751- 480 Watts (MAX. THD)
Front speaker output
Subwoofer
160 W/CH (4 Ω/100 Hz)
160 W (5 Ω/100 Hz)
MX-E760/E761- 650 Watts (MAX. THD)
Front speaker output
Subwoofer
Amplifier
200 W/CH (6 Ω/100 Hz)
250 W (5 Ω/100 Hz)
MX-E770/E771- 1000 Watts (MAX. THD)
Front speaker output
190 W/CH (6 Ω/100 Hz)
Rear speaker output
95 W/CH (12 Ω/100 Hz)0
Subwoofer
215 W/CH (5 Ω/100 Hz)
Frequency range
20 Hz~20 KHz
S/N Ratio
75 dB
Channel separation
50 dB
Input sensitivity
(AUX)800 mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
Downloaded From Disc-Player.com Samsung Manuals
English
14
15
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
Contact Center
WebSite
Area
Contact Center
WebSite
0-800-555-555
0-88-555-55-55
8-10-800-500-55-500
0-800-61440
Code No. AH68-02453B(Rev 0.0)
Downloaded From Disc-Player.com Samsung Manuals