American Innovative, Neverlate Executive NL7DEX-US Operating instructions

TM
Neverlate
Executive Alarm Clock
Neverlate ExecutiveTM Alarm Clock
Model No. NL7DEX-US, Instructions for Use
Product Registration
Please visit American Innovative on the web at www.americaninnovative.com/register/
to register your new purchase.
IMPORTANT SAFEGUARDS,
PLEASE READ FIRST!
CAUTION: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient
magnitude
to
constitute a risk of electric
shock to persons.
Page 3
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
THERE ARE NO USER-SERVICEABLE PARTS
INSIDE. PLEASE REFER ANY SERVICING TO
QUALIFIED SERVICE PERSONNEL.
AVERTISSEMENT: RISQUE DE
ÉLECTRIQUE – NE PAS OUVRIR
This symbol is intended to
alert the user to the presence
of important operating and
maintenance
(servicing)
instructions in the literature
accompanying the appliance.
CHOC
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
IMPORTANT SAFETY INSTRUCTIONS
For your protection, please read these safety instructions completely before operating this
product. All operating and use instructions should be followed. All warnings printed on the
device and in the operating instructions should be adhered to. Please keep this manual for
future reference.
Water & Moisture
Do not use this device near water. For example, do not use this device near a bathtub, wash
bowl, kitchen sink or laundry tub. Do not use this device in a wet basement, near a swimming
pool or near any other source of water. Do not place water-filled vessels on this device.
Heat & Open Flame
Do not place this device near any heat sources such as radiators, stoves, amplifiers or other
devices that produce heat. Do not place an open flame on or near this device.
Ventilation
The openings in the cabinet of this device are designed to provide necessary ventilation for
the product’s internal components and to protect it from overheating. Ensure that these
openings remain free of obstructions. Do not situate this device on a bed, sofa, rug, or similar
surface that may block ventilation openings. This product should not be placed in a built-in
installation, such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Power Source
This product should be connected to a power supply only of the type marked on the outside
of the unit. If you are not sure of the type of power supply to your home, please consult your
product dealer or local power company. Where the main plug is used as the disconnect
device, the disconnect device shall remain readily operable. Please refer to the operating
instructions regarding use and replacement of the backup battery.
Grounding or Polarization
Precaution should be taken not to defeat the safety purpose of grounding or polarization.
This product is equipped with a polarized AC power cord plug (one blade is wider than the
other). This plug is designed to fit into the power outlet in only one way. If you are unable to
fully insert the plug into the power outlet, try reversing it. If the plug should still fail to fit, use
a different outlet or contact a certified electrician to have a suitable outlet installed.
Overloading
Do not overload wall outlets, extension cords, etc. beyond their rated capacity.
When Not In Use
Unplug the unit from the wall when not using for prolonged periods of time. When removing
the power cord from the wall, always grasp the plug; do not pull the cord itself.
Page 4
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Power Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by items
placed on or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
Lightning
If the unit is not plugged into an appropriately rated surge protector, unplug the unit from the
wall in the event of a lightning storm in order to protect it from powerline surges. Unplug the
unit if it is to be unused for a long period of time.
Object & Liquid Entry
Never insert objects of any kind into this product, through ventilation openings, as these
objects may touch dangerous voltage points or create a short circuit that could result in a fire
or electric shock. Never spill liquid of any kind on or into the device.
Cleaning
Unplug the unit from the wall before cleaning. Use a soft, damp cloth to wipe down the unit.
Do not use liquid, aerosol or abrasive cleaners.
Servicing & Safety Checks
Do not attempt to service the unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. All servicing should be referred to qualified personnel.
Servicing is required when the unit does not operate properly or has been damaged in any
way, including but not limited to power supply/cord damage, damage as a result of exposure
to moisture, and damage resulting from impact. Upon completion of any service or repairs to
this product, ask the service technician to perform routine safety checks.
Damage Requiring Service
This product should be fixed by qualified service personnel under the following conditions:
1.
2.
3.
4.
5.
6.
When the power supply, cord or plug has been damaged.
If liquid has been spilled, or objects have fallen into the unit.
If the unit is exposed to rain or water.
If the product does not operate normally when following the operating instructions.
If the unit has been dropped or damaged in any way.
When the product exhibits a distinct change in performance.
Replacement Parts
In the event that replacement parts are required, ensure that the service technician uses parts
specified by the manufacturer or those deemed to be equivalent. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
Page 5
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
FCC INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to the equipment that are not expressly approved by
the responsible party for compliance could void the user’s authority to operate the equipment.
ABOUT AMERICAN INNOVATIVE™
American Innovative was founded to pursue the development of innovative new products that
should exist, but don't. “Products that make sense.” is our motto and the execution of this
philosophy can be seen throughout the company's product line. Careful attention to the needs
of the user and a keen eye for industrial design and user interface engineering are the secrets
of American Innovative's success. To learn more about American Innovative please visit us on
the web at www.americaninnovative.com.
SERVICE CONTACT INFORMATION
Please check http://www.americaninnovative.com/contact/ for the most up-to-date contact
information and for details regarding product servicing and/or warranty claims. An RMA
(Return Merchandise Authorization) number is required for any product returned to AI.
American Innovative, LLC
Attn: RMA# (note: RMA # must be requested online)
398 Columbus Avenue, Suite 321
Boston, MA 02116 USA
Page 6
p. (617) 395-7831
w. http://www.americaninnovative.com/contact/
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Table of Contents
Setup ............................................................................................................................................9
Setting the Time & Date .................................................................................................................................... 9
Battery Backup (optional) .................................................................................................................................. 9
Using the Radio and Station Presets ..........................................................................................10
Basic Operation ................................................................................................................................................10
Storing Station Presets .....................................................................................................................................10
Recalling Station Presets...................................................................................................................................10
Understanding the Neverlate’s Alarm Features .........................................................................11
Daily Alarm Bank ..............................................................................................................................................11
7-day Alarm Banks ............................................................................................................................................11
Which Alarm Bank(s) Should I (or We) Use? ......................................................................................................11
Setting Alarms ............................................................................................................................12
Customizing the Wake Buzzer Ringtone or Station Preset ................................................................................12
Setting the Alarm Wake Volume .......................................................................................................................12
Using the Nap and Sleep Timers ................................................................................................13
Using the Nap Timer.........................................................................................................................................13
Using the Sleep Timer ......................................................................................................................................13
Setting User Preferences ............................................................................................................14
Advanced Features.....................................................................................................................15
Alarm Skip ........................................................................................................................................................15
“One Time” Alarm Adjust (BETA Feature) ........................................................................................................15
Using Inputs & Outputs ..............................................................................................................16
Auxiliary (AUX) Input.........................................................................................................................................16
Headphone (Line-Out) Output..........................................................................................................................16
Powered USB Port (No Data) ............................................................................................................................16
Other Products from American Innovative .................................................................................17
Onaroo by American Innovative – Smart Products for Children and Their Parents ............................................17
American Innovative – Specialty Timers and Clocks ..........................................................................................17
Page 7
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Page 8
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Setup
Setting the Time & Date
The first time you plug in your Neverlate, use the Setup
Sequence to input the current time and date:
1. Ensure that the MODE knob is in either the “Run” or “All
Off” position. Press and hold the SETUP key for two (2)
seconds to initiate the Setup Sequence.
2. Twist the VALUE collar or use the SEEK | SCAN +/- keys
to adjust the value of each parameter.
3. Press the SETUP key between steps and to complete the
procedure.
TIP: The STATION PRESET
PREV/NEXT keys may be
used to step back and forth
between steps.
TIP: Exit the Setup
Sequence at any time by
pressing the
ON | OFF key.
TIP: The Setup Sequence
exits automatically after
sixty (60) seconds of
inactivity.
Step Name
T-FORM
Description
Time Format (12/24 HR)
TIME
Current Time
Select 12- or 24-hour clock format.
Enter the current time. Note: The SRC | SAVE key may
be used to toggle between AM and PM.
D-FORM
Date Format (MM.DD or DD.MM)
Select Month.Day or Day.Month date format.
MONTH
Month (1 – 12)
DAY
Day (1 – 31)
Enter the numeric month.
Enter the day.
YEAR
Year (2000 – 2099)
Enter the year.
Battery Backup (optional)
Your Neverlate uses one CR2032 button cell battery to retain its
memory. Install the battery with the positive side ( + ) facing
out. In the event of a power outage the LCD display is not
illuminated but the time, alarm settings and other preferences
will be retained until the power is restored.
WARNING: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
Page 9
TIP: This feature is also
convenient should you wish
to relocate your Neverlate
from one room to another.
TIP: The CR2032 button
cell battery is available for
purchase at your local drug
or electronics store.
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Using the Radio and Station Presets
The Neverlate Executive contains a high-quality FM/AM digital
tuner and can store up to twenty (20) station presets.
Basic Operation
Turn the radio on or off using the ON | OFF key. Note that the
radio cannot be toggled on or off while the MODE knob is in
any of the alarm set positions.
Use the SRC | SAVE key to cycle the audio source between FM,
AM and AUX (See Using Inputs & Outputs on page 16 for more
information on using the auxiliary audio input).
Use the VOLUME +/- keys to adjust the digital volume control.
Use the SEEK | SCAN +/- keys to adjust the radio frequency.
Press and hold these keys for one (1) second to scan to the next
strong station automatically.
Storing Station Presets
Your Neverlate can store up to 20 station presets. To store a
station preset:
1. Locate the station you would like to store.
2. Press and hold the SRC | SAVE key for two (2) seconds.
The next available station preset location flashes in the
display.
3. If desired, change the preset location using the STATION
PRESET PREV/NEXT keys.
4. Press the SRC | SAVE key to lock in the new station
preset. The station preset location stops flashing.
NOTE: If the location selected has been stored previously, it will
be overwritten.
TIP: The FM antenna is
integrated into the
power cord. If you are
having trouble
receiving FM
broadcasts, try
reorienting the position
of the cord.
TIP: The radio volume is
independent of the
alarm wake volume.
See Setting the Alarm
Wake Volume on page
12.
TIP: The Neverlate does
not utilize the concept
of an “AM Bank” or
“FM Bank” of presets.
Any station from either
band can be stored in
any preset location.
TIP: To remove a
station preset from a
previously stored
location, press and hold
the SNOOZE key for
two (2) seconds while
that station preset is
displayed.
Recalling Station Presets
Use the STATION PRESET PREV/NEXT keys to step through the
presets that you have already stored. Empty station preset
locations are not recalled.
Page 10
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Understanding the Neverlate’s Alarm Features
The Neverlate Executive contains three “banks” of alarms: One
“Daily” alarm bank (alarms sound every day) and two “7-day”
alarm banks (day-specific alarms sound on a weekly schedule).
Daily Alarm Bank
Up to seven Daily alarms may be set.
The Daily alarm bank works just like any other alarm clock you
may be familiar with. Any Daily alarms that are set (as many as
seven) sound every day at the appointed time. This is similar to
a standard “dual alarm clock” except there are seven. Daily
alarms do not correlate to the days of the week – they will go off
at the appointed time every single day.
7-day Alarm Banks
7-day Alarm bank #1. i.e. “His”.
7-day Alarm bank #2. i.e. “Hers”.
Each 7-day alarm bank is a set of seven alarms – one for each
day of the week. A different wake time may be set for each day
of the week.
TIP: The Daily alarm
bank is useful for other
purposes besides
waking. For example, if
you take medication
four times a day, set
any four daily alarms for
those times.
TIP: When
programming alarms, a
specific alarm may be
set (alarm time visible
on the display) but then
made “inactive” so it
does not sound (--:-visible on the display).
This effectively stores
an alarm time for later
use and it may be easily
toggled on and off.
Please see Setting
Alarms step #3 on the
next page.
Which Alarm Bank(s) Should I (or We) Use?
I’m just one person and I get up at the same time each day …
Use the Daily bank: Set Daily-1 to the time you get up each morning.
We’re two people and we each get up at the same time each
day, but my spouse/partner gets up before I do …
Use the Daily bank: Set any Daily alarm (i.e. Daily-1) to the time you wake and
another Daily alarm (i.e. Daily-2) to the time your spouse/partner wakes.
I’m just one person and I have a varied morning wake
schedule …
Use one of the 7-day banks: Input your schedule accordingly.
We’re two people with two different morning wake schedules …
TIP: Although common
use cases are described
at left, any combination
of alarms from different
banks may be utilized
to suit your specific
wake and/or reminder
needs. In other words,
all three alarm banks
are designed to be
used simultaneously, if
desired.
Use both 7-day banks simultaneously: Input your weekly schedule into one
7-day bank and your spouse or partner’s weekly schedule into the other.
Page 11
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Setting Alarms
In this manual, the term “active” is used to describe alarms that
will sound and “inactive” is used to describe alarms that are
disabled. Regardless of the alarm bank(s) used, all alarms are
set in the same manner:
1. Position the inner MODE knob to any one of the seven (7)
alarm set positions. The words
appear.
2. Use the BANK key to toggle the alarm bank between:
,
,
and
3. Press the ON | OFF key to toggle the active state of the
alarm you are setting. Active alarms display horizontal
bars, as shown in these examples:
NOTE: All alarms are inactive until set the first time.
4. Adjust the wake time using the VALUE collar.
5. Reposition the MODE knob to another alarm set position
and repeat the process for any/all alarms that you would
like to activate.
6. When finished, position the MODE knob to “Run” (active
alarms sound) or “All Off” (no alarms sound).
NOTE: In RUN mode, press the SNOOZE | REVIEW key to
review the details of the next upcoming alarm.
Customizing the Wake Buzzer Ringtone or Station Preset
Any alarm you set may be assigned its own buzzer ringtone or
radio station preset. By default, all active alarms are assigned
buzzer ringtone 01. To change this:
1. Use the SRC | SAVE key to select whether you would like
to wake to a buzzer ringtone or radio preset.
2. Use the STATION PRESET PREV/NEXT keys to change
the buzzer ringtone or radio station preset number.
Setting the Alarm Wake Volume
The alarm volume is independent of the master volume control.
This feature is useful if you like to play the radio softly in the
evening but require a louder volume to arise in the morning.
Change the alarm volume from any alarm set position by using
the VOLUME +/- keys.
Page 12
TIP: By default, all
alarms are inactive until
set the first time.
TIP: Moving the VALUE
collar will also
automatically activate
an alarm that is
currently inactive.
TIP: Use the ALL OFF
position if you plan to
be away on vacation.
When you return,
simply position the
MODE knob back to
RUN and all of your
usual alarm settings will
be resumed.
TIP: The alarm set
interval (default: 5 mins)
and the review duration
may be customized.
See Setting User
Preferences on page
14.
TIP: This customizable
feature allows, for
example, you and your
spouse to wake up to
different radio stations.
TIP: The alarm volume
is global to all alarm
settings.
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Using the Nap and Sleep Timers
Using the Nap Timer
The nap timer provides an easy way to take a power nap
without having to disrupt any of your other alarm settings. To
use the nap timer:
1. Press the NAP key. If the radio is on, it turns off
automatically. The nap icon and the current nap duration
(default: 0:20 mins) appear in the display.
2. If desired, adjust the nap timer duration using the VALUE
collar. By default, the nap timer duration adjusts in
5-minute increments up to 2:00 hours.
3. The nap timer starts automatically and counts down until
it reaches 0:00 at which point it sounds.
Cancel the nap timer mid-operation by pressing the NAP key or
the ON | OFF key at any time.
Using the Sleep Timer
The purpose of the sleep timer is to turn the radio off
automatically if you tend to fall asleep at night with the radio on.
To use the sleep timer:
1. Press the SLEEP key. If the radio is off, it turns on
automatically. The sleep icon and the current sleep
duration (default: 1:00 hour) appear in the display.
TIP: The Neverlate
automatically
remembers the last nap
and sleep timer values
entered for the next
time.
TIP: The buzzer
ringtone or station
preset that the nap
timer sounds to may be
customized using the
PREFS key. See
Setting User
Preferences on page
14.
TIP: The ALMINT
setting under PREFS
also affects the nap and
sleep timer intervals.
TIP: When using the
sleep timer the radio
station can still be
adjusted. Presets may
be recalled the same as
usual.
2. If desired, adjust the sleep timer duration using the
VALUE collar. By default, the sleep timer duration adjusts
in 5-minute increments up to 2:00 hours.
3. The sleep timer starts automatically and counts down
until it reaches 0:00 at which point the radio turns off.
Cancel the sleep timer mid-operation by pressing the SLEEP key
or the ON | OFF key at any time.
Page 13
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Setting User Preferences
Advanced users may wish to customize one or more aspects of
the way their Neverlate behaves:
1. Press and hold the PREFS key for two (2) seconds to
initiate the Preferences Sequence.
2. Twist the VALUE collar or use the SEEK | SCAN +/- keys
to adjust the value of each parameter.
3. Press the PREFS key between steps and to complete the
procedure.
Step Name
SNZLEN
Description
Snooze Duration (0:01 – 0:30 mins)
SNZTYP
Snooze Type (NORM, DESC or OFF)
TIP: The STATION
PRESET PREV/NEXT
keys may be used to
step back and forth
between steps.
TIP: Exit the
Preferences Sequence
at any time by pressing
the ON | OFF key.
Select the duration that the Neverlate snoozes for.
Select the behavior of the snooze function:
Normal: The alarm sounds again after SNZLEN minutes.
Repeatable indefinitely.
Descending: Each time the Neverlate is “snoozed” the
snooze duration is halved.
Off: The Snooze key does not respond.
GRAD
Gradual Wake (ON or OFF)
On: Audible alarms start quietly and slowly raise in
volume until the full alarm volume is reached.
Off: Disabled.
ALMINT
Alarm Adj. Interval (0:01, 0:05, 0:10 or 0:15)
Select the alarm adjustment interval – the number of
minutes that each “click” of the VALUE collar represents
when inputting alarm, sleep and nap settings.
GLOW
Backlight Level (OFF, LOW, MED, HIGH)
Select the brightness level of the backlight at steady
state. The backlight temporarily illuminates HIGH for 15
seconds any time a control is touched.
REVLEN
Alarm Review Duration (0:00 – 0:15 secs)
Select the duration that the “Alarm Review” feature is
displayed for. Select 0:00 to disable this feature.
ALMLEN
Audible Alarm Duration (0:01 min – 2:00 hrs)
Select the duration that audible alarms sound for before
shutting off automatically.
NAPTON
Nap Buzzer Ringtone or Radio Station Preset
Select how the nap timer sounds. Use the SRC | SAVE
key to toggle between buzzer ringtone or station
preset. Use the VALUE collar to choose the preset
number.
Page 14
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Advanced Features
Alarm Skip
The alarm skip feature is provided as a convenience for
individuals who tend to wake up before their alarm sounds in
the morning. To easily skip the next upcoming alarm just once:
TIP: Turning the MODE
knob to “ALL OFF” also
cancels the alarm skip
feature.
1. Press and hold the ON | OFF key for two (2) seconds.
The word “SKIP” appears in the display. The upcoming
alarm does not sound.
2. Once the appointed alarm time is reached, the word
“SKIP” disappears and that alarm is enabled for the next
time.
NOTE: Once enabled, the alarm skip feature may be cancelled
at any time by tapping the ON | OFF key. The word “SKIP”
disappears and the skip feature is cancelled.
“One Time” Alarm Adjust (BETA Feature)
The purpose of this feature is simple - if there is a one-time
variation in your morning routine the "One Time" alarm adjust
may be used to temporarily alter the wake time of the next,
upcoming alarm. After it sounds, the temporarily adjusted alarm
reverts back to its ordinary setting. To make a "One Time"
adjustment:
1. Press the SNOOZE | REVIEW key to invoke the "alarm
review" feature. The next upcoming alarm is displayed.
2. While review is active, adjust the displayed alarm time
using the value collar. The words ONE TIME appear in
the display to indicate that the "One Time" alarm adjust
feature is active.
NOTE: Once enabled, the “One Time” alarm adjust may be
cancelled at any time by tapping the ON | OFF key. The word
“ONE TIME” disappears and the “One Time” feature is
cancelled.
Page 15
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Using Inputs & Outputs
The rear panel of the Neverlate contains three jacks.
Auxiliary (AUX) Input
The AUX jack is used to play an MP3 player or any other lowpowered external audio source through the internal speaker:
1. Plug your audio source into the AUX jack.
2. Use the SRC | SAVE key to toggle the input source to AUX.
TIP: Use a dual-sided
(male-male) 1/8” audio
cable (not included) to
make the connection
between most lowpowered audio devices
and your Neverlate.
3. Press play on your external audio device.
NOTE: The sleep timer will work in conjunction with an external
audio source. When the sleep timer expires the Neverlate shuts
off and the external audio source will no longer be heard.
However, the Neverlate is unable to automatically power down an
external device. Use your external device’s timed shutoff function
to ensure that its batteries are not depleted overnight.
Headphone (Line-Out) Output
Listen to the Neverlate without disturbing your spouse or partner
by using a pair of headphones with a standard 1/8” stereo male
connector.
Alternatively, connect an external, powered speaker to the
Neverlate using the same jack.
Powered USB Port (No Data)
Use the Neverlate’s USB port to power some external USB
devices such as a laptop-type lamp or fan.
Page 16
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Other Products from American Innovative
Please visit us on the web at www.americaninnovative.com.
Onaroo by American Innovative – Smart Products for Children and Their Parents
Teach Me Time!
Talking Alarm Clock & Night-Light
OK to Wake!
Alarm Clock & Night-Light
OK to Wake! Owl With Night-Light & Music
Personal Baby Assistant (PBA)
American Innovative – Specialty Timers and Clocks
Chef’s Quad-Timer
Professional
Page 17
American Innovative
Limited Edition Nixie Clock
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
American Innovative, LLC * Limited Warranty
Coverage
American Innovative, LLC warrants this product against defects in original material and
workmanship for a period of ninety (90) days, under normal use and conditions.
Non-Coverage
This warranty does not cover customer instruction, installation, set up or signal reception
problems. This warranty does not cover cosmetic damage or damage resulting from acts of
God, accident, misuse, abuse, negligence, commercial application (or rental), or modification
(including the antenna). This warranty does not cover damage due to improper operation or
maintenance, connection to an improper voltage supply, or attempted repair by anyone other
than American Innovative, LLC or American Innovative, LLC authorized service facilities. This
warrantee does not cover products sold “as is” or “with all faults”. This warrantee is valid only
in the United States and is invalid if the product serial number has been altered or removed.
Making a Warranty Claim
Please check http://www.americaninnovative.com/contact/ for the latest information
pertaining to warranty claims. At the company’s discretion, American Innovative will repair or
replace the defective unit. Proof of purchase in the form of a bill of sale or receipted invoice
which is evidence that the unit is within the warranty period must be presented to obtain
warranty service.
Other Information
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. ANY APPLICABLE IMPLIED WARRANTEES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE
EXPRESSED WARRANTY AS PROVIDED ABOVE, BEGINNING WITH THE ORIGINAL DATE OF
PURCHASE. NO WARRANTEES, WHETHER EXPRESSED OR IMPLIED, SHALL APPLY TO THE
PRODUCT THEREAFTER. WE MAKE NO WARRANTY AS TO THE FITNESS OF THE
PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY EXCEED THE
PURCHASE PRICE PAID BY THE PURCHASER. UNDER NO CIRCUMSTANCES WILL WE BE
LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS PRODUCT.
Applicability of State Law
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, BUT YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW
LIMITATIONS ON IMPLIED WARRANTIES OR EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGE, SO THESE RESTRICTIONS MAY NOT APPLY TO YOU.
Page 18
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.
Printed in China.
Neverlate Executive Product Manual v3.0 (US)
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.