HI FI COMPONENT SYSTEM
MODEL
XL-DAB151PH(S)
XL-DAB151PH(BK)
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
● XL-DAB151PH(S) Hi Fi Component System consisting of XL-DAB151PH(S) (main unit) and CP-HF151H (speaker
system).
● XL-DAB151PH(BK) Hi Fi Component System consisting of XL-DAB151PH(BK) (main unit) and CP-HF151H (speaker
system).
CD/USB
RDS
DAB
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries. iPad is a trademark
of Apple Inc.
11/8/2
XL-DAB151PH_Front_AUS.fm
Special Notes
Laser Diode Properties
Material: AIGaAs
Wavelength: 790 nm
Emission Duration: continuous
Laser Output: max. 0.7 mW
WARNINGS
● When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the
timer mode or remote control.
● This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
● To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the
apparatus.
● Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying
or broadcasting such material without permission of the
relevant licensees or owners of the copyright is prohibited
by law. SHARP is not in a position to authorise the copying
or broadcasting of copyright materials and nothing in this
OPERATION MANUAL should be implied as giving that
authority.
“Made for iPod,” “Made for iPhone,” and “Made for iPad”
mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad,
respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not
responsible for the operation of this device or its
compliance with safety and regulatory standards. Please
note that the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
For other countries:
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Please refer to the relevant laws in
your country.
NOTE
● Recording and playback of any material may require
consent, which SHARP is unable to give. Please refer
particularly to the provisions of the Copyright Act 1956,
the Dramatic and Musical Performers Protection Act
1958, the Performers Protection Acts 1963 and 1972
and to any subsequent statutory enactments and
orders.
CAUTION
● This product is classified as a CLASS 1 LASER product.
● Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
As the laser beam used in this compact disc player is
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personnel only.
2
11/8/3
01_XLDAB151PH EN_AUS.fm
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
The following accessories are included.
Adaptors for iPhone x 3
Remote control x 1
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar) x 1
DAB/FM aerial x 1
AC power lead x 1
Stand for iPad x 1
CONTENTS
Page
Page
General Information
USB
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Listening to USB mass storage
device/MP3 player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . 16
Preparation for Use
Radio
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . 16 - 17
Using the Radio Data System (RDS) . . . . . . . . . 17 - 19
Listening to the DAB+ . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing the information display . . . . . . . . . . . . . . . . 21
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the clock (Remote control only) . . . . . . . . . . . 8 - 9
Advanced Features
iPod, iPhone and iPad
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 22 - 23
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 24
Listening to the iPod, iPhone or iPad. . . . . . . . . . . . 9 - 11
CD or MP3/WMA disc Playback
References
Listening to a CD or MP3/WMA disc . . . . . . . . . . 11 - 12
Advanced CD or MP3/WMA disc playback . . . . . . 12 - 13
MP3/WMA folder mode (only for MP3/WMA files) . . . . . 14
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . 24 - 25
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3
11/8/3
01_XLDAB151PH EN_AUS.fm
Precautions
■
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental aspects
of battery disposal.
● This unit should only be used within the range of
5°C - 35°C (41°F - 95°F).
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
General
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
10 cm (4")
10 cm (4")
10 cm (4")
10 cm (4")
● Use the unit on a firm, level surface free from vibration.
● Place the speakers at least 30 cm (12") away from any
CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than
60°C (140°F) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for safety.
■
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Controls and indicators
1 2
3
5
6
7
4
8
■
9
10
11 12 13 14 15
Front panel
Page
10. Headphone Socket. . . . . . . . . . . . . . . . . . . . . . . . 24
11. Tuner Preset Down, CD/USB Track Down,
iPod/iPhone Skip Down . . . . . . . . . . . . . . . . . 11, 12
12. Tuner Preset Up, CD/USB Track Up,
iPod/iPhone Skip Up . . . . . . . . . . . . . . . . . . . 11, 12
13. Disc/USB Stop Button . . . . . . . . . . . . . . . . . . . . . 12
14. Disc/USB/iPod/iPhone Play or
Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . 11
Page
1. Remote sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2. Timer indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .22
3. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
4. Docking Station for iPod or iPhone. . . . . . . . . . .10
5. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6. On/Stand-by Button . . . . . . . . . . . . . . .8, 10, 11, 16
7. FUNCTION Button . . . . . . . . . . . . . .8, 10, 11, 15, 15
8. USB Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
9. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . .24
4
11/8/3
01_XLDAB151PH EN_AUS.fm
Controls and indicators (continued)
■
1
2
4
5
6
7
8
27
28
29
9
10
11
12
13
14
15
30
31
32
33
34
35
36
37
38
39
CD/USB
RDS
16
DAB
17
1 23 4
Page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . 7
2. On/Stand-by Button. . . . . . . . . . . . . . . . . . . 8, 10, 11, 22
3. Numeric Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. Tuning Down, Skip Down, Fast Reverse,
Time Down Button . . . . . . . . . . . . . . . . . 8, 11, 14, 16, 22
7. Tuner Preset Up Button,
iPod Cursor Up. . . . . . . . . . . . . . . . . . . . . . . . . 10, 15, 16
8. Volume Down Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
10. Tuner Preset Down Button,
iPod Cursor Down . . . . . . . . . . . . . . . . . . . . . . 10, 15, 16
11. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12. USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13. iPod Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14. iPod Display (TV OUT) Button . . . . . . . . . . . . . . . . . . 10
15. CD/USB Display Button. . . . . . . . . . . . . . . . . . . . . 14, 15
16. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
17. DAB SCAN Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
18. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16
20. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
21. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 8, 22
22. Sleep Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
23. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
24. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
25. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
26. Tuning Up, Skip Up, Fast Forward,
Time Up Button . . . . . . . . . . . . . . . . . . . 8, 11, 14, 16, 22
27. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
28. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 15, 22
29. Demo/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . 6, 8
30. Audio/Line (INPUT) Button . . . . . . . . . . . . . . . . . . . 7, 24
31. Tuner/DAB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
32. iPod Play/Pause Button. . . . . . . . . . . . . . . . . . . . . . . . 10
33. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
34. CD/USB Play/Pause Button. . . . . . . . . . . . . . . 11, 12, 15
35. CD/USB Stop Button . . . . . . . . . . . . . . . . . . . 11, 12, 15
36. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . 17
37. RDS PTY Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
38. DAB Display Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
39. DAB Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
18
19
20
21
22
23
24
25
26
3
5 6
16
17 18 19 20
7 8 9
21
10 12 14
11 13 15
22 23 24 25
Remote control
■
26 27 28
Display
Page
1. USB Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
+
■
1.
2.
3.
4.
2. iPod Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
4. DAB+ Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
5. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
7. RDM (Random) Indicator. . . . . . . . . . . . . . . . . . . . . . .13
8. MEM (Memory) Indicator . . . . . . . . . . . . . . . . . . . . . . .13
9. Repeat Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
10. Play/Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 12
11. Tuning FM Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12. FM Stereo Mode Indicator. . . . . . . . . . . . . . . . . . . . . . 16
13. Stereo Station Indicator . . . . . . . . . . . . . . . . . . . . . . . 16
14. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15. PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
16. Muting Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
17. X-bass Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
18. Title Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19. Artist Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
20. Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
21. Album Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
22. File Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
23. Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
24. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 22
25. Once Timer Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . 22
26. Disc Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
27. Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
28. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Speaker system
Tweeter
Woofer
Bass Reflex Duct
Speaker Wire
1
3
2
4
■
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragms when
you remove the speaker grilles.
5
11/8/3
01_XLDAB151PH EN_AUS.fm
System connections
Make sure to unplug the AC power lead before making any connections.
Right
speaker
Video cable
(not supplied)
DAB/FM aerial
TV
To video input socket
Left
speaker
RED
BLACK
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
MODEL NO.
XL-DAB151PH(S)
HI FI COMPONENT SYSTEM
AC 220 - 240V
50/60Hz
45W
FREQUENCY RANGE : FM 87.5 - 108 MHz
DAB 174.928 - 239.200 MHz
Label is located at the
bottom of the unit.
SERIAL NO.
MADE IN CHINA
92Lxxxxxxxxxxx
■
■
Aerial connection
Supplied DAB/FM aerial:
Connect the DAB/FM aerial wire to the DAB/FM terminal
and position the DAB/FM aerial wire in the direction where
the strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
■
Speaker connection
● Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
● Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can damage
the unit.
● Do not mistake the right and the
Incorrect
left channels. The right speaker is
the one on the right side when you
face the unit.
● Do not let the bare speaker wires touch each other.
● Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
● Do not stand or sit on the speakers. You may be
injured.
■
01_XLDAB151PH EN_AUS.fm
Connecting iPod or iPhone to TV
Photo and video files from iPod or iPhone can be viewed
by connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO
OUT socket at the back of the unit and set the TV Out on
the iPod or iPhone unit to “ON” position.
Note:
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple’s homepage for
further information.
6
11/8/3
Demonstration mode
● The first time the unit is plugged in, the unit will enter
the demonstration mode.
● To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power standby mode. The unit will enter the low power consumption
mode.
● If iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed. Demonstration mode
is invalid during charge mode.
● To return to the demonstration mode, press the DEMO/
DIMMER button again.
System connections (continued)
Remote control
■
■
AC power connection
Battery installation
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
1 Open the battery cover.
2 Insert the supplied battery according to the direction
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
indicated in the battery compartment.
When inserting or removing the battery, push it towards the
(–) battery terminals.
3 Close the cover.
■
Line input connection (TV, etc.)
Connect to the TV using an audio cable.
TV
To audio
output sockets
Caution:
● Remove the battery if the unit will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
● Do not use rechargeable battery (nickel-cadmium battery,
etc.).
● Installing the battery incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Notes concerning use:
● Replace the battery if the operating distance is reduced or
if the operation becomes erratic. Purchase a “AA” size
battery (UM/SUM-3, R6, HP-7 or similar).
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat, shock,
and vibrations.
Audio cable
(commercially
available)
Audio signal
Main unit
To LINE
input
sockets
■
Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the
unit. The remote control can be used within the range shown
below:
To select Line In function:
● On main unit: Press FUNCTION button repeatedly until
Line In is displayed.
● On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
Remote sensor
0.2 m - 6 m
(8" - 20' )
CD/USB
RDS
DAB
7
11/8/3
01_XLDAB151PH EN_AUS.fm
General control
■ Bass control
1 Press the BASS/TREBLE button to select “Bass”.
2 Within 5 seconds, press the VOLUME (+ or –) button to adjust the
bass.
- 5 ↔ - 4........↔ + 4 ↔ + 5
■ Treble control
1 Press the BASS/TREBLE button to select “Treble”.
2 Within 5 seconds, press the VOLUME (+ or –) button to adjust the
CD/USB
RDS
DAB
treble.
■
To turn the power on
- 5 ↔ - 4........↔ + 4 ↔ + 5
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
■
■
Function
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
Display brightness control
To dim the display brightness, press the DEMO/DIMMER button on
the remote control.
CD
(Display is dim).
Dimmer 2 (Display gets dimmer).
Dimmer off (Display is bright).
FM STEREO
FM MONO
Dimmer 1
■
DAB
Line In
Volume auto set-in
Volume control
Setting the clock (Remote control only)
Turn the volume knob towards VOLUME +/– (on main unit) or press
VOL +/– (on remote control) to increase or decrease the volume.
■
Audio In
USB
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.
If you turn off and on the main unit with the volume set to 17 or higher,
the volume starts at 16.
■
iPod
Auto power on function
When you press any of the following buttons, the unit turns on.
● iPod, CD, USB, AUDIO / LINE (INPUT), TUNER/DAB on the
remote control: Selected function is activated.
●
/ button on the main unit: The unit turns on and playback of
the last function will start (CD, TUNER/DAB, USB, iPod, AUDIO
IN, LINE IN)
■
Auto power off function
The main unit will enter the stand-by mode (when iPod or iPhone is
not docked) after 15 minutes of inactivity during:
iPod: No connection.
AUDIO IN / LINE IN: No detection of input signal or very low sound
audibility.
CD / USB: In the stop mode.
Note:
However, if iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed during standby mode.
■
CD/USB
RDS
DAB
In this example, the clock is set for the 24-hour (00:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the ENTER button. To adjust the day,
Muting
press the
or
button and then press the ENTER
button.
4 Press the
or
button to select 24-hour or 12-hour
display and then press the ENTER button.
The volume is muted temporarily when pressing the MUTE button on
the remote control. Press again to restore the volume.
■
X-Bass control
The 24-hour display will appear.
(00:00 - 23:59)
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and “X-BASS” will
appear. To cancel the extra bass mode, press the X-BASS button on
the remote control.
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
8
11/8/3
01_XLDAB151PH EN_AUS.fm
Setting the clock (Remote control
only) (continued)
■
iPod, iPhone and iPad connection
(USB only)
1 Insert the connector to the iPod, iPhone or iPad.
5 To adjust the hour, press the
or
button
or
and then press the ENTER button. Press the
button once to advance the time by 1 hour. Hold
it down to advance continuously.
6 To adjust the minutes, press the
or
button
or
and then press the ENTER button. Press the
button once to advance the time by 1 minute.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
iPad
Connector
Note:
When power supply is restored after unit is plugged in again
or after a power failure, reset the clock (pages 8 - 9).
To readjust the clock:
Perform “Setting the clock” from step 2.
2 Place the iPad to the stand for iPad.
iPad
To change the 24-hour or 12-hour display:
Perform “Setting the clock” from step 2 onwards.
Stand for
iPad
Listening to the iPod, iPhone or iPad
Made for:
● iPod touch (4th generation)
● iPod touch (3rd generation)
● iPod touch (2nd generation)
● iPod touch (1st generation)
● iPod classic
● iPod nano (6th generation)
● iPod nano (5th generation)
● iPod nano (4th generation)
● iPod nano (3rd generation)
● iPod nano (2nd generation)
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPad
Caution:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s
homepage to download the latest version for your iPod,
iPhone and iPad.
Notes:
● Charging terminal for iPod, iPhone and iPad:
Condition
DOCK
USB
USB function
NO
YES
Other function
YES
NO
Stand-by
YES
NO
3 Connect the iPod, iPhone or iPad to the unit via USB
connector.
USB
Note:
USB terminal do not support VIDEO out.
■ iPod, iPhone or iPad playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the USB button on the remote control or FUNCTION button
repeatedly on the main unit to select USB function.
3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” will
appear.
4 Press the / (CD/USB
● The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
● This product is made for iPhone. To prevent random
interference when iPhone is docked, the headphone
output is disabled, and “HP INVALID” will be
displayed. You may also experience brief audio
interference during incoming calls.
■
01_XLDAB151PH EN_AUS.fm
iPod and iPhone connection (Dock only)
Note:
Docking station is not recommended for iPad connection.
Adaptor for iPod and iPhone connection
Notes:
● Please use the adaptor supplied with your iPod or iPhone unit.
● You can use an audio cable to connect your iPod to the AUDIO
IN socket if:
1. your iPod adaptor does not fit into the iPod dock on the
main unit.
2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
9
11/8/3
/ ) button to start playback.
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad playback.
Listening to the iPod, iPhone or iPad (continued)
Adaptor
No.
12
15
15
19
■
iPhone
Description
iPhone
iPhone 3G
iPhone 3GS
iPhone 4
Capacity
4GB & 8GB & 16GB
8GB & 16GB
16GB & 32GB
16GB & 32GB
To insert adaptor for iPod or iPhone
1 Open the docking station for iPod and iPhone by pulling
up.
CD/USB
RDS
DAB
2 Insert the adaptor for iPod and iPhone into unit and
■
connect your iPod or iPhone.
iPhone (bottom)
iPhone playback
● Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately 10
seconds.
● Incoming calls will pause the playback.
● Once the calls are answered, the conversation can only be
heard through the built-in iPhone speaker. Turn on the
iPhone speaker or undock the iPhone to start conversation.
iPhone
Dock connector
Adaptor for iPhone
■
To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking station or
iPad from USB terminal. It is safe to do so even during
playback.
Dock for iPhone
Connector for iPhone
■
Watching videos on a TV connected to
iPod or iPhone
Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
1 Press the DISPLAY (TV OUT) button for more than 2
■
2 Press the ENTER button to start playback.
seconds. “TV Display” will appear on display.
To remove adaptor for iPod or iPhone
Insert the tip of a screwdriver (“–” type,
small) into the adaptor hole as shown
and lift upward to remove.
■
Notes:
● If the TV Out setting is already turned on at video menu, the
video is automatically displayed on the TV screen when
ENTER key is pressed.
● TV out display is not support through USB terminal. (iPad)
● To return to watching video on iPod or iPhone screen, press
the MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds until
“iPod Display” appears.
● During iPod or iPhone video playback, pressing the DISPLAY
(TV OUT) button will not toggle video out display between
iPod and TV.
iPod or iPhone playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.
3 Insert iPod or iPhone unit in iPod dock of main unit. “Dock
Ok” will appear.
4 Press the / (iPod
Caution:
● Unplug all accessories for the iPod or iPhone before inserting
it into the docking station.
● Stop button ( ) at main unit is invalid during iPod function.
/ ) button to start playback.
10
11/8/3
01_XLDAB151PH EN_AUS.fm
Listening to the iPod, iPhone or iPad (continued)
■
Navigating the iPod, iPhone or iPad
menus
Function
Main unit
Dock/USB
Remote control
Dock
USB
iPod
iPod
____
Enter
____
Press to confirm the
selection.
Cursor
Up/Down
____
Press to select in
the iPod menu.
1 Press the iPod MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to previous
menu.
2 Use the PRESET ( or ) button to select an item on the
menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by pressing the VOL (+ or –)
button on the main unit or the remote control. Adjusting the
volume on the iPod, iPhone or iPad units give no effect.
Operation
Menu
Press to view the
iPod menu during
iPod function.
Listening to a CD or MP3/WMA disc
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod ,
iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod,
iPhone or connected iPad unit will automatically turn to stand-by
mode.
■
Various iPod, iPhone and iPad functions
Function
Main unit
Dock/USB
Play
Remote control
Dock
USB
iPod
CD/USB
iPod
Pause
CD/USB
Track up/
down
Fast
forward/
reverse
____
Operation
CD/USB
Press in the pause
mode.
DAB
Press in the
playback mode.
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the /
button to start the
desired track.
Press and hold
down in the
playback mode.
Release the button
to resume
playback.
Press for more than
2 seconds to toggle
the video out
display between
iPod or TV.
TV Display
____
Repeat
____
Press to toggle
repeat mode.
Shuffle
____
Press to toggle
shuffle mode.
iPod
RDS
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was used
for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which
is processed by significant compression from the original
audio source with very little loss in sound quality.
● This system supports MPEG 1 Layer 3 and VBR files.
● During VBR file playback, time counter in the display may
differ from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
● “MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
● Bitrate which is supported by WMA is 64 ~ 160 kbps.
■
Disc playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
11
11/8/3
01_XLDAB151PH EN_AUS.fm
Listening to a CD or MP3/WMA disc
Advanced CD or MP3/WMA disc
playback
(continued)
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the / (CD/USB / ) button to start playback. After
CD/USB
RDS
the last track is played, the unit will stop automatically.
DAB
Caution:
● Do not place two discs in one disc tray.
● Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
● Do not push the disc tray whilst it is moving.
● If the power fails whilst the tray is open, wait until the power
is restored.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● Be sure to place 8 cm (3") disc in the middle of the disc tray.
● Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Notes for CD or MP3/WMA disc:
Rewritable multi-session discs with unfinished writing, can
still be played.
■
■
Direct track search
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track whilst playing the selected disc.
● The Numeric buttons allow you to select up to number 9.
● When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
Selected track number
B. For example, to choose 130
Various disc functions
Function
Play
Stop
Pause
Track
up/
down
Fast
forward/
reverse
Main
unit
Remote
control
CD/USB
CD/USB
CD/USB
1
2
3
4
Operation
Press in the stop mode.
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the (CD/USB ) button.
Press in the playback
mode.
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
■
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the REPEAT button repeatedly until “Repeat One”
appears. Press the / (CD/USB / ) button.
To repeat all tracks:
Press the REPEAT button repeatedly until “Repeat All”
appears. Press the / (CD/USB / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on next
page and then press the REPEAT button repeatedly until
“Repeat All” appears.
To cancel repeat play:
Press the REPEAT button repeatedly until “
” disappears.
Caution:
After performing repeat play, be sure to press the (CD/
USB ) button. Otherwise, the disc will play continuously.
Note:
During repeat play, random play is not possible.
12
11/8/3
01_XLDAB151PH EN_AUS.fm
Advanced CD or MP3/WMA disc playback (continued)
■
■
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM button on the remote control until “Random”
appears. Press the / (CD/USB / ) button.
To cancel random play:
Press the RANDOM button until “RDM” indicator disappears.
Notes:
● If you press the
button during random play, you
can move to the track selected next by the random
operation. On the other hand, the
button does not
allow you to move to the previous track. The beginning of
the track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
● During random play, repeat play is not possible.
■
Programmed play (MP3/WMA)
1 Whilst in the stop mode, press the MEMORY button to
enter the programming save mode.
2 Press the PRESET (
or
) button on the remote
control to select the desired folder.
or
button on the remote
Then press the
control to select the desired tracks.
3 Press the MEMORY button to save the folder and track
number.
Programmed play (CD)
You can choose up to 32 selections for playback in the order
you like.
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5 Press the
/ (CD/USB
/ ) button to start playback.
1 Whilst in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
To cancel the programmed play mode:
During programmed stop mode, press the (CD/USB )
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.
2 Press the
or
buttons on the remote control
to select the desired track.
Selected track number
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. If you make a
mistake, the programmed tracks can be cleared by
pressing the CLEAR button.
5 Press the
/ (CD/USB
/ ) button to start playback.
13
11/8/3
01_XLDAB151PH EN_AUS.fm
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow steps 2 - 3 to add tracks.
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
● Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
CD/USB
RDS
DAB
■
About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
These folders can be selected by the FOLDER button on
the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next
folder will be selected.
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
■
Procedure to playback MP3/WMA disc with
folder mode on
To play back CD-R/RW.
1 Press the CD button, and load an MP3/WMA disc.
Press the FOLDER button and disc info will be
displayed.
1 ROOT folder is set as folder 1.
MP3 indicator
WMA indicator
2 As for folders inside ROOT folder (Folder A and Folder
TOTAL indicator
B), the folder which is recorded earlier on the disc will be
set as folder 2 and folder 3.
3 As for folder inside Folder A (Folder C and Folder D), the
Total number of folder
folder which is recorded earlier on the disc will be set as
folder 4 and folder 5.
or ) button to select desired
playback folder. (Folder mode on)
4 Folder E that is inside Folder D will be set as folder 6.
FOLDER
indicator
● The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
● For CD MP3/WMA, 99 numbers of folders and 999 files
inclusive of the folders which have non playable files
can be read.
FOLDER number
FOLDER A
(FOLDER 2)
FOLDER C
(FOLDER 4)
FOLDER D
(FOLDER 5)
FOLDER B
(FOLDER 3)
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)
First track number
in the folder
3 Select desired file to be played back by pressing the
Folder mode on/off can be operated by the FOLDER
button on the remote control. Files that are played when
folder mode is set to the on position, may differ from those
played back when folder mode is turned off.
ROOT
(FOLDER 1)
Total number of files
2 Press the PRESET (
or
button.
4 Press the / (CD/USB / ) button. Playback will start
and file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded on the disc.
● In case of playback with the folder mode on, press
the PRESET ( or ) button, and the folder can be
selected even though it is in playback/pause mode.
It will continue playback/pause mode in the 1st track
of the selected folder.
● Display content can be changed by pressing the
CD/ USB DISPLAY button.
FILE 9
FILE 10
File name display
FILE 1
FILE 2
Counter display
Album display
Folder display
Title display
Artist display
Note:
If “Not Supported” is displayed, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
14
11/8/3
01_XLDAB151PH EN_AUS.fm
Listening to USB mass storage device/MP3 player
2 Press the FOLDER button, and press the PRESET (
or ) button to select desired playback folder. To start
playback with folder mode on, go to step 4. To change
the playback folder, press the PRESET (
or
)
button to select another folder.
3 Select desired file to be played back by pressing the
or
button.
4 Press the
/ (CD/USB / ) button. Playback will start
and the file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the CD/
USB DISPLAY button.
■
CD/USB
RDS
To remove USB memory device
DAB
1 Press the
Note:
This product is not compatible with MTP and AAC file
systems from USB mass storage device or MP3 player.
■
(CD/USB
) button to stop playback.
2 Disconnect USB memory device from the USB terminal.
To play back USB/MP3 player with folder
mode off
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Select desired file to be played back by pressing the
or
button.
3 Press the / (CD/USB / ) button. Playback will start
and the file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
CD/USB DISPLAY button.
Note:
To pause playback:
Press the / (CD/USB
■
/ ) button.
To play back USB/MP3 player with folder
mode on
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
15
11/8/3
01_XLDAB151PH EN_AUS.fm
Notes:
● SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
● This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, “Not
Supported” is indicated and the file will be automatically
skipped. This will take a few seconds. If abnormal
indications appear on the display due to the unspecified
file, turn off the unit and then turn it on again.
● This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
● During CD function, MP3 player will not be charging.
Advanced USB playback
Listening to the radio
The following functions are the same as CD
operations:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . . 13
Note:
If USB memory device is not connected, “USB No Media”
will be shown on the display.
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
● Playlists are not supported on this unit.
● This unit can display Folder Name or File Name up to
32 characters.
● Maximum total number of MP3/WMA files is 999.
● Total number of folders read is 99 including folder with
non-playable file. However, the display shows only
folder with MP3 files.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
CD/USB
RDS
DAB
■
Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER/DAB button repeatedly to select FM
Stereo or FM Mono.
3 Press the TUNING (
or
) button on the remote
control to tune in to the desired station.
● Manual tuning:
) button repeatedly to
Press the TUNING ( or
tune in to the desired station.
● Auto tuning:
When the TUNING ( or ) button is pressed for
more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING ( or )
button again.
● When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light up. Finally, the station name will
appear.
● Full auto tuning can be achieved for RDS stations
“ASPM”, see page 18.
To receive an FM stereo transmission:
● Press the TUNER/DAB button to select stereo mode
and “ST” indicator will be displayed. “
” and “ ” will
appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER/DAB
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
16
11/8/3
01_XLDAB151PH EN_AUS.fm
Listening to the radio (continued)
Using the Radio Data System (RDS)
■
RDS is a broadcasting service which a growing
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“PTYI” (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received.
Memorising a station
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in “Tuning”.
2 Press the MEMORY button.
3 Within 30 seconds, press the PRESET (
or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
4 Within 30 seconds, press the MEMORY button to store
that station in memory. If the “MEMORY” and preset
number indicators disappear before the station is
memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
■
You can control the RDS by using the buttons on the
remote control only.
■
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
To recall a memorised station
1 Press the PRESET (
or ) button for less than 0.5
seconds to select the desired station.
■
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
CD/USB
RDS
1 Press the PRESET (
or ) button for more than 0.5
seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for 5
seconds each.
2 Press the PRESET (
or
desired station is located.
DAB
) button again when the
Station name (PS)
■
Programme type (PTY)
To erase entire preset memory
1 Press the TUNER/DAB button on remote control or
press the FUNCTION button on main unit repeatedly to
select Tuner function.
2 In Tuner function, press the CLEAR button until “Tuner
Clear” appears.
17
11/8/3
01_XLDAB151PH EN_AUS.fm
Frequency
Radio text (RT)
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
No PS
No PTY
FM 98.80 MHz
No RT
Using the Radio Data System (RDS) (continued)
■
Notes for radio text:
● The first 14 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
● If you tune in to an RDS station which is not
broadcasting any radio text, “No RT” will be displayed
when you switch to the radio text position.
● Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
Using the Auto Station Programme
Memory (ASPM)
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
■
1 Press the TUNER/DAB button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme type
(news, sports, traffic programme, etc. ... see page 19) from
the stations in memory.
2 Press and hold down the RDS ASPM button on the
remote control.
1 After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
1 Press the TUNER/DAB button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 Press the RDS PTY button on the remote control.
2 When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
“SELECT” and “PTY TI” will appear alternately for
about 6 seconds.
3 After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
3 Within 6 seconds, press the
4 Whilst the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
Notes:
● Any station which has the same frequency as the one
stored in memory will not be stored.
● If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
● If no station have been stored in memory, “END” will
appear for about 4 seconds.
● If the RDS signals are very weak, station names may
not be stored in memory.
● The same station name can be stored in different
channels.
● In a certain area or during certain time periods, the
station names may temporarily be different.
After the selected programme type has been lit for 2
seconds, “SEARCH” will appear, and the search
operation will start.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about
8 seconds, and then the station name will remain it.
● If you want to listen to the same programme type of
another station, press the RDS PTY button whilst the
channel number or station name is flashing. The unit
will look for the next station.
● If no station can be found, “Not Found” will appear for 4
seconds.
Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
● “PS”, “No PS” and a station name appear alternately,
and the unit does not operate properly.
● If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
● When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
● “No PS”, “No PTY” or “No RT” will flash for about 5
seconds, and then the frequency will be displayed.
18
11/8/3
button to
Each time the button is pressed, the programme type
will appear.
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept
there.
■
or
select the programme type.
01_XLDAB151PH EN_AUS.fm
Using the Radio Data System (RDS) (continued)
Descriptions of the PTY (Programme Type) codes
You can search for and receive the following PTY signals.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
Short accounts of facts, events and
publicly expressed views, reportage and
actuality.
Topical programme expanding or
enlarging upon the news, generally in
different presentation style or concept,
including debate, or analysis.
Programmes whose purpose is to impart
advice in the widest sense.
Programme concerned with any aspect
of sport.
Programme intended primarily to
educate, of which the formal element is
fundamental.
All radio plays and serials.
Programmes concerned with any aspect
of national or regional culture, including
language, theatre, etc.
Programmes about the natural sciences
and technology.
Used
for
mainly
speech-based
programmes
usually
of
lightentertainment nature, not covered by
other categories. Examples include:
quizzes, panel games, personality
interviews.
Commercial
music,
which
would
generally be considered to be of current
popular appeal, often featuring in current
or recent record sales charts.
Contemporary modern music, usually
written and performed by young
musicians.
Current contemporary music considered
to be “easy-listening”, as opposed to
Pop, Rock or Classical, or one of the
specialised music styles, Jazz, Folk or
Country. Music in this category is often
but not always, vocal, and usually of
short duration.
Classical music for general, rather than
specialist appreciation. Examples of
music in this category are instrumental
music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and
including Grand Opera.
Musical styles not fitting into any of the
other categories. Particularly used for
specialist music of which Rhythm &
Blues and Reggae are examples.
Weather reports and forecasts and
meteorological information.
Stock Market reports, commerce,
trading, etc.
For programmes targeted at a young
audience, primarily for entertainment
and interest, rather than where the
objective is to educate.
Programmes about people and things
that influence them individually or in
groups. Includes: sociology, history,
geography, psychology and society.
Any aspect of beliefs and faiths, involving
a God or Gods, the nature of existence
and ethics.
19
11/8/3
01_XLDAB151PH EN_AUS.fm
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
Involving members of the public
expressing their views either by phone or
at a public forum.
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas and
opportunities.
Not
for
use
for
announcements about problems, delays,
or roadworks affecting immediate travel
where TP/TA should be used.
Programmes
concerned
with
recreational activities in which the
listener might participate. Examples
include, Gardening, Fishing, Antique
collecting, Cooking, Food & Wine, etc.
Polyphonic,
syncopated
music
characterised by improvisation.
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
Current Popular Music of the Nation or
Region in that country's language, as
opposed to International “Pop” which is
usually US or UK inspired and in English.
Music from the so-called “golden age” of
popular music.
Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
Programme concerned with factual
matters, presented in an investigative
style.
Broadcast when testing emergency
broadcast equipment or receivers.
Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
Listening to the DAB+
■
After the scan:
The stations will be stored in alphanumeric order and the
first station on the list will be selected and you will hear it
through the speakers.
About DAB+ (Digital Audio Broadcasting)
Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more
stations (services). Each station contains a primary
service and there may be one or more secondary services.
This allows several programmes or services to be
transmitted on a single frequency.
● To listen to other stations, see “Selecting a station in
the station list” on page 20.
Notes:
● If no station is found, “No Service” appears.
■
DAB + SIGNAL
Selecting a station in the station list
Once a DAB+ station is received, you can select stations
in the station list.
MULTIPLEX
(ENSEMBLE)
1 Press the TUNER/DAB button until “DAB” appears
on the display.
2 Whilst receiving a DAB+ station, press the TUNING
( or ) to select the desired station.
SERVICES
SERVICES
COMPONENTS
(STATIONS)
■
Display current station
The name of the station
being selected
Auto Scan
3 Within 10 seconds, press the DAB ENTER button on
the remote control to tune into the desired station.
■
Manual tune
CD/USB
You can manually store stations which Auto Scan cannot
find. If reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto Scan. Perform
Auto Scan first.
RDS
DAB
When turned on for the first time, the unit scans radio
stations automatically to create a station list. You can make
the Auto Scan again when you move the unit to other areas
or add multiplex channels to the station list.
1 Press the TUNER/DAB button until “DAB” appears
on the display.
2 Press the DAB SCAN button
once.
1 Press the TUNER/DAB button until “DAB” appears on
the display.
3 Within 10 seconds, press the
TUNING (
or
) to select
the DAB+ frequency.
2 Press DAB SCAN button on the remote control for
more than 3 seconds. Scanning begins.
4 Within 10 seconds, press the
DAB ENTER button.
+
(G: Good, B: Bad)
The number of received The scanning progress
station
● Reception sensitivity appears. The percentage
number indicate the current level.
● If the level is too low, move the aerial or unit to
improve reception.
The number of stations found and the scanning process
are shown on the display.
5 Press the DAB ENTER button again to store the
station and exit manual tune.
20
11/8/3
01_XLDAB151PH EN_AUS.fm
Changing the information display
You can switch DAB+ display information.
Press the DAB DISPLAY button.
Each time the button is pressed, the information display
changes in the following order.
When “No Service” appears, the DAB DISPLAY button
does not allow you to change the display.
■
Memorising a station
You can store 40 DAB stations in memory and recall them
at the push of a button. (Preset tuning)
1 Tune to the desired DAB station.
2 Press the MEMORY station.
[Station Name]
3 Within 30 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
[Signal quality]
[Scrolling text]
4 Within 30 seconds, press the MEMORY button to store
that station in memory. If the "MEMORY" and preset
number indicators dissapear before the station is
memorised, repeat the operation from step 2.
[Mode]
5 Repeat steps 1 - 4 to set other stations, or to change a
[Programme type]
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
[Channel/Frequency]
[Multiplex name]
■
[Station Name]
Station name is displayed. (set by default)
DAB Frequency table (BAND III)
Frequency
Label
Frequency
174.928 MHz
5A
208.064 MHz
Label
9D
176.640 MHz
5B
209.936 MHz
10A
178.352 MHz
5C
211.648 MHz
10B
[Scrolling text]
Information scrolls across the display when sent from the
station.
180.064 MHz
5D
213.360 MHz
10C
181.936 MHz
6A
215.072 MHz
10D
183.648 MHz
6B
216.928 MHz
11A
[Programme type]
A description of the type of content being broadcast by
the station.
185.360 MHz
6C
218.640 MHz
11B
187.072 MHz
6D
220.352 MHz
11C
188.928 MHz
7A
222.064 MHz
11D
190.640 MHz
7B
223.936 MHz
12A
192.352 MHz
7C
225.648 MHz
12B
194.064 MHz
7D
227.360 MHz
12C
195.936 MHz
8A
229.072 MHz
12D
197.648 MHz
8B
230.784 MHz
13A
199.360 MHz
8C
232.496 MHz
13B
201.072 MHz
8D
234.208 MHz
13C
202.928 MHz
9A
235.776 MHz
13D
204.640 MHz
9B
237.488 MHz
13E
206.352 MHz
9C
239.200 MHz
13F
[Multiplex name]
The name of the multiplex (ensemble) which provides the
current service.
[Channel/Frequency]
The DAB+ channel and frequency for the station.
(Frequency is displayed to two decimal places)
[Mode]
The data transfer speed and channel type (stereo or
mono) appear.
[Signal quality]
The signal quality is displayed as a number (0 - 100).
[85-100: Good, 70-84: Fair, 0-69: Poor]
*
21
11/8/3
01_XLDAB151PH EN_AUS.fm
Frequencies are displayed to two decimal places on
this unit.
Timer and sleep operation (Remote control only)
■
Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 8 - 9). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
CD/USB
RDS
DAB
1 Press the ON/STAND-BY button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER/DAB, USB, iPod, AUDIO IN, LINE IN) at a preset
time.
3 Within 10 seconds, press the
or
button to
select “Once” or “Daily”, and press the ENTER button.
4 Within 10 seconds, press the
or
button to
select “Timer Set”, and press the ENTER button.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).
5 To select the timer playback source (CD, TUNER/DAB,
or
USB, iPod, AUDIO IN, LINE IN), press the
button. Press the ENTER button.
When you select the tuner, select a station by pressing
or
button, and then press the ENTER
the
button. If a station has not been programmed, “No
Preset” will be displayed and timer setting will be
cancelled.
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
(“DAILY” indicator).
6 To adjust the day, press the
or
button and
then press the ENTER button.
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
7 Press the ENTER button to adjust the hour. Press the
or
button and then press the ENTER
button.
1 Set the daily timer (pages 22 - 23).
8 To adjust the minutes, press the
or
button
and then press the ENTER button.
2 Set the once timer (pages 22 - 23).
9 Set the time to finish as in steps 7 and 8 above.
1 minute or more
Start
10 Adjust the volume using the VOLUME control, and then
press the ENTER button. Do not turn the volume up too
high.
Once timer
Daily timer
Stop
Start
Stop
11 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
12 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during
timer playback.
22
11/8/3
01_XLDAB151PH EN_AUS.fm
Timer and sleep operation (Remote control only) (continued)
13 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time for every day. It will
continue until the daily timer setting is cancelled. Cancel
the daily timer when it is not in use.
■
Sleep operation
The radio, compact disc, iPod, USB, Audio In and Line In
can all be turned off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the Numeric button to set the
time. (1 minute ~ 99 minutes)
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, select
“USB” or “AUDIO IN” or “LINE IN” in step 5.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
Checking the timer setting:
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to
select “Timer Call”, and press the ENTER button.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the “0” button twice until
Cancelling the timer setting:
“SLEEP 00” appears.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to
select “Timer Off”, and press the ENTER button. Timer
will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to
select “Timer On” , and press the ENTER button.
4 Press the ON/STAND-BY button to enter the power
stand-by mode.
23
11/8/3
01_XLDAB151PH EN_AUS.fm
■
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 22).
Sleep timer
setting
Timer playback
setting
1-99 minutes
Sleep operation will
automatically stop
End
time
Desired time
Timer playback
start time
Enhancing your system
Troubleshooting chart
The connection lead is not included. Purchase a
commercially available lead as shown below.
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service
centre.
■
General
Symptom
Portable audio
player, etc.
● Did a power failure occur?
Reset the clock. (Refer
page 8 - 9)
● When a button is
pressed, the unit
does not respond.
● Set the unit to the power
stand-by mode and then
turn it back on.
● If the unit still malfunctions,
reset it. (Refer page 25)
● No sound is heard.
● Is the volume level set to
“Min”?
● Are the headphones
connected?
● Are the speaker wires
disconnected?
Audio cable (not supplied)
■
Listening to the playback sounds of
portable audio player, etc.
■
1 Use a connection lead to connect the portable audio
Possible cause
● The clock is not set
to the correct time.
CD player
player etc. to the AUDIO IN socket. When using video
equipment, connect the audio output to this unit and the
video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO/LINE (INPUT) button on the remote
control or FUNCTION button repeatedly on main unit to
select AUDIO IN function.
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase the
volume of the connected device.
● Playback sounds are ● Is the unit located near
skipped, or stopped
excessive vibrations?
in the middle of a
● Is the disc very dirty?
track.
● Has condensation formed
inside the unit?
Note:
To prevent noise interference, place the unit away from the
television.
■
■
Symptom
● Playback does not
start.
● Playback stops in
the middle or is not
performed properly.
Headphones
Remote control
Symptom
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphone,
reduce the volume.
● Be sure your headphone has a 3.5 mm (1/8") diameter
plug and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
● Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
● The remote control
does not operate.
■
Symptom
11/8/3
01_XLDAB151PH EN_AUS.fm
Possible cause
● Is the AC power lead of the
unit plugged in?
● Is the battery polarity
correct?
● Are the batteries dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong
light?
Tuner
● The radio makes
unusual noises
continuously.
24
Possible cause
● Is the disc loaded upside
down?
● Does the disc satisfy the
standards?
● Is the disc distorted or
scratched?
Possible cause
● Is the unit placed near the
TV or computer?
● Is the DAB/FM aerial
placed properly? Move the
aerial away from the AC
power lead if it is located
nearby.
Troubleshooting chart (continued)
■
If such a problem occurs, do the following:
USB
Symptom
● Device cannot
be detected.
● Playback does
not start.
● Wrong time
display.
● Wrong file name
display.
■
Possible cause
● Is there any MP3/WMA file
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain AAC
file only?
● Is it a copyright protected
WMA file?
● Is it a false MP3 file?
● Is Variable Bitrate file being
played back?
● Is the File Name written in
Chinese or Japanese
characters?
and plug in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
■
●
●
●
●
●
●
●
● iPod, iPhone or
iPad will not
charge.
● “This accessory
is not made to
work with
iPhone” or “This
accessory is not
supported by
iPhone” appears
on iPhone
screen.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the AUDIO/LINE (INPUT) button on the remote
control or FUNCTION button repeatedly on the main unit
to select LINE IN function.
3 In LINE IN function, press the
then press and hold the
●
●
●
●
●
■
Before transporting the unit
Remove the iPod, USB memory device and disc from the
unit. Then, set the unit to the power stand-by mode. Carrying
the unit with iPod or USB memory device left docked or discs
left inside might damage the unit.
■
Care of compact discs
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a CD
is dirty or does not play properly, clean it with a soft, dry
cloth, wiping straight out from the centre, along the radius.
NO
YES
Correct
Maintenance
■
Condensation
If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
25
11/8/3
button on the main unit
button until “RESET” appears.
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
Possible cause
The iPod, iPhone or iPad is not
playing.
The iPod, iPhone or iPad is not
properly connected to the unit.
Is the AC power lead of the
unit plugged in?
The video cable is not properly
connected.
The TV/monitor’s input
selection is not properly set.
The iPod TV out feature has
not been set to output video.
USB terminal do not support
video.
The iPod, iPhone or iPad is not
making full contact with the
connector.
Using iPod (3rd generation).
The iPod or iPhone is not
supported. Refer to page 9 for
compatible models.
The iPhone battery is low.
Please charge the iPhone.
iPhone is not properly docked.
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■
Factory reset, clearing all memory
iPod, iPhone or iPad
Symptom
● No sound is
produced.
No image
appears on the
TV/monitor.
■
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug
01_XLDAB151PH EN_AUS.fm
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
■
Cleaning the CD pickup lens
Poor performance during CD playback (skipping or jumping)
can be caused by a dirty or contaminated CD laser pick up
lens. If this happens then the use of a commercially
available CD lens cleaning disc may restore normal
operation. Contact your supplier or local CD software dealer
to obtain CD lens cleaning discs. Ensure all included
instructions/documentation are carefully followed.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
■
USB host interface ● Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage
Class.
● Support Bulk only and CBI
protocol.
Support file
● MPEG 1 Layer 3
● WMA (Non DRM)
Bitrate support
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
Other
● Maximum total number of
MP3/WMA files is 999.
● Maximum total number of
folders is 99 INCLUSIVE of
root directory.
● The ID3TAG information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1
and version 2.
File system
● Support USB devices with
Microsoft Windows/DOS/FAT
support
12/FAT 16/ FAT 32.
● 2 kbyte block length for sector.
General
Power source
AC 220 - 240 V ~ 50/60 Hz
Power
consumption
Power on: 45 W
Power stand-by: 0.4 W (*)
Dimensions
Width: 215 mm
Height: 96 mm
Depth: 335 mm
Weight
3.4 kg
( * ) This power consumption value is obtained when the
demonstration mode is cancelled in the power standby mode. Refer to page 6 to cancel the demonstration
mode.
■
Amplifier
Output power
MPO: 60 W (30 W + 30 W)
(10% T.H.D.)
RMS: 30 W (15 W + 15 W)
(10% T.H.D.)
RMS: 24 W (12 W + 12 W)
(1% T.H.D.)
■
Output terminals Speakers: 4 ohms
20Hz - 20kHz
Subwoofer Pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Video output: 1 Vp-p
Headphones: 16 ohms
(recommended: 32 ohms)
Input terminals
■
CD player
Single disc multi-play compact disc
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
26
11/8/3
01_XLDAB151PH EN_AUS.fm
Tuner/DAB
Frequency range
FM: 87.5 - 108 MHz
DAB: 174.928 - 239.200 MHz
Preset
40 (FM station)
40 (DAB)
■
Audio In (audio signal):
500 mV/47 k ohms
Line in (Analogue input):
500 mV/47 k ohms
Type
USB
Speaker
Type
2-way type speaker system
5 cm (2") Tweeter
10 cm (4"-3/4") woofer
Maximum input
power
30 W
Rated input power
15 W
Impedance
4 ohms
Dimensions
Width: 132 mm
Height: 262 mm
Depth: 175 mm
Weight
1.8 kg/each
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.au
OR CALL SHARP CUSTOMER CARE
1300 135 022
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
FOR LOCATION ENQUIRIES WITHIN
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.nz
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
XL-DAB151PH_AUS Back.fm
2011July29
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in material and manufacture for the
period as stated in the table below.
If service is required during the warranty period, please contact your nearest Sharp
Approved Service Centre. These repairs would be carried out at no charge to the
owner, subject to the conditions specified herein.
This warranty does not extend to defects or injuries caused by or resulting from causes
not attributable to faulty parts or the manufacture of the product, including but not
limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of
maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation,
software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a
warranty claim. This warranty is in addition to and in no way limits, varies or excludes
any implied rights and remedies under any relevant legislation in the country of sale.
This warranty does not cover transportation to and from the Sharp Approved Service
Centre. Goods presented for repair may be replaced by refurbished goods of the same
type rather than being repaired. Refurbished parts may be used to repair the goods.
The repair of your goods may result in the loss of user generated data, please ensure
that you have saved this data elsewhere prior to repair.
Australian customers: Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount
to a major failure. The criteria of a major failure is defined in the Australian
Consumer Law. Should you require any assistance with a major failure please
contact Sharp Customer Care.
WARRANTY PERIODS
12 months (excluding lamps and air filters)
12 months
12 months
12 months
24 months
12 months
24 months
12 months
12 months
12 months
24 months
S
A HA
AB UST RP
1 N RA CO
Hu Hun 40 LIA RP
nt tin 003 P OR
in g
gw wo 03 TY. ATI
oo od 9 4 LIM ON
0
d
O
NS Driv 5 ITE F
D
W e
S
21
N HAR
48
59 EW P C
Pe Hu ZEA OR
nr go L PO
os J AN R
e, oh D A
Au ns LI TIO
ck ton MIT N
lan D E OF
d riv D
e
Home Theatre Projector
Audio/Home Theatre
Microwave / Steam Oven
Slow Juicer
Refrigerator
DVD/Blu-ray
Washing Machine
Portable Air Conditioner
LCD Television
Air Purifier
Vacuum Cleaner
SPform 040 (SEPT 2013)
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand