Casio W43CA Instruction manual

Basic
Manual
Contents/Ready
Phone Call
Inputting
Characters
Address Book/
Pair Function
Mail/
Hello Messenger
Camera
EZweb
EZ Navi
EZ FeliCa
EZ・FM
PC Site Viewer
Smart Mode/
Teens Mode
Other Functions
Troubleshooting/
Remote Auto Lock
Index
Introduction
Thank you for purchasing the W43CA.
Before using it for the first time, be sure to read the W43CA Basic Manual (this PDF
manual) so as to know how to use it correctly. After you finish reading this manual, store it
and the printed materials that come with the phone in a safe place for future reference.
Printed Manuals for the W43CA (Japanese)
The W43CA comes with a Basic Manual and an Instruction Manual.
For information about basic
operation
For detailed information
about each function
目次
目次/準備
ご利用の準備
au ICカード
通話
基本操作
ペア機能
文字入力
メール
Hello Messenger
W43CA
アドレス帳/
ペア機能
メール/
Hello Messenger
カメラ
カメラ
by CASIO
データフォルダ
取扱説明書
microSDTM
メモリカード
EZweb
EZナビ
EZweb
au Music
EZナビ
EZアプリ(BREW ®)
EZ FeliCa
EZ FeliCa
EZ・FM
EZ・FM
EZニュースフラッシュ
PCサイトビューアー
au My Page
赤外線通信
スマートモード/
ティーンズモード
PCサイトビューアー
スマートモード
ティーンズモード
その他機能
困ったときは/
遠隔オートロック
便利な機能
機能設定
English(英語)/
(中国語)
auのネットワーク
サービス
索引
付録/索引
クイックガイド
W43CA Basic Manual
W43CA Instruction Manual
Equivalent to this English PDF manual.
English version not available.
The following information is also available on the au website.
• To download the Basic Manual or Instruction Manual
(http://au-pro.kddi.com/phone/torisetu/index.html)
• To access a keyword searchable au online manual
(http://www.au.kddi.com/manual/index.html)
You can also access the au online manual using EZweb.
EZweb Access
EZトップメニュー(EZ Top Menu)
→auお客さまサポート(au Customer Support)
→調べる(Information)
→auオンラインマニュアル(au Online Manual)
The typeface, fonts, and colors of the texts on the screens shown in this manual may differ from
the actual contents. Also, certain icons and the scroll bars may be omitted.
Cellphone Etiquette
Mind your manners!
A cellphone always emits weak radio waves while it is turned on.
Enjoy operation of your cellphone without forgetting to be considerate
of those around you.
Some locations do not allow the use of
cellphones.
■ Using a cellphone while driving is dangerous and
prohibited by Traffic Control Law.
■ Using a cellphone inside of an aircraft is prohibited
by law. Be sure to turn off your cellphone before
takeoff.
Watch out where you use your cellphone,
and keep your voice down.
■ Do not make calls at cinemas, theaters, museums,
libraries, or other similar locations. Turn off the
cellphone or use Manner Mode to ensure that the
ring tone does not disturb others.
■ When in public, move to a location where you will
not be blocking traffic.
■ On the Shinkansen, in a hotel lobby, or in other similar locations, move
to a location where you will not disturb others.
■ Take care to avoid talking on the phone in a loud voice.
■ Before taking the picture of others, be sure to obtain permissions first.
Cellphone radio waves may interfere with
electrical medical equipment.
■ On a train or in other crowded locations, there is
always the possibility that someone nearby may be
wearing a pacemaker. Turn off your cellphone when
you are in a crowded area.
■ Follow the rules of hospitals and other medical
facilities prohibiting the use or possession of cellphones.
1
Cellphone Basics
Features
Camera
Shoot photos and
record movies, and
send them by e-mail.
Page
59
PC Site Viewer
View WEB sites
created for viewing
on PCs.
Page
85
EZ Navi
EZ Navi Walk,
Position Search,
and Area Message
allow you to get
various kinds of
location information.
They are all built-in
functions.
Page
EZ FeliCa
Hello Messenger
Security Setup
Use the cellphone for
shopping by using
e-money, or use it as
member’s cards,
point cards, and so
on.
Enjoy meeting with the
members using our
original cartoon-like
characters.
Select either “Safety
Buzzer” or “Hot Dial”
as reliable setting
function.
Page
55
EZ·FM
Send mail messages
to other cellphones or
to PCs.
Page
Page
Page
102
78
Mail
45
EZweb
Enjoy listening to
EZ•FM programs.
Page
82
Download
“Chaku-Uta® ”,
wallpaper, and other
data.
Page
2
74
66
Manner Mode and Easy Voice Memo
Manner Mode
Easy Voice Memo
Use Manner Mode to turn off the
ring tone so as not to bother
others around you.
While the standby
screen is displayed,
hold down ( for
about one second.
Shhhhhhh!
Page
If you cannot answer a call, Easy
Voice Memo plays an answering
message and records the caller’s
message.
While the standby
screen is displayed,
hold down C for
about one second.
31
Page
32
Checking Power, Signal
Strength, and Battery Level
Normally leave the phone turned on.
Power
on
The phone needs to be turned on to make and receive
calls.
Hold down F for at least 2.5 seconds to turn on W43CA.
After a while, W43CA turns on with tone and the standby
screen appears.
Page 14
You cannot talk on the phone
if it is unable to receive a signal.
Signal strength is low in some areas, even if
they are within the service area.
indicates the current signal strength.
Page
14
Keep an eye on the battery level.
The phone may not function properly if battery
power is low.
indicates the current battery level.
Page
14
3
Never use your cellphone while
driving!
Holding a cellphone in your hand, talking on a cellphone, or
looking at a cellphone display to send mail or to perform any
other operation while driving is prohibited by Japanese law.
(Revised Traffic Control Law, effective November 1, 2004)
× Reading mail or looking
at the display.
× Holding a cellphone in
your hand to talk.
Turn off your cellphone or use Drive Mode while
driving.
Drive Mode
In Drive Mode, the phone will play the message“ただいま車を運転
しています。
・・・”(I am driving right now...), and then ask the caller
to leave a message using Easy Voice Memo.
I’m driving
right now...
While the standby screen is displayed, press (,
and then press 1 (ON). Next, press 2 (Drive
Mode) to enter Drive Mode.
4
Beware of spam and one-ring
calls!
How to Combat Spam
You can set up mail filters to block specific
mail or mail identified as “未承諾広告※”
(unsolicited advertisement), which often
includes spam.
Your cellphone has the following filters to
block spam.
・未承諾広告フィルター
(unsolicited advertisement filter)
・アドレスフィルター (address filters)
−指定拒否設定 (blocks specific mail)
−指定受信設定 (receives specific mail)
Page
52
Beware of one-ring calls!
A “one-ring call” (wan-giri in Japanese)
rings your phone only once, in an attempt
to make you call back to a service that
automatically bills you very high charges.
g
e-rin
On
!
l
l
ca
The
icon at the head
of an incoming record
indicates that the call
rang for only four seconds or less.
This indicates a possible “one-ring call.”
Page
27
5
Disaster Message Board Service
Disaster Message Board
The Disaster Message Board lets you use EZweb to register
information about your well-being in case of a major disaster. The
information you register can be accessed from anywhere in Japan
over EZweb or the Internet.
Registering
the safety
information
Checking
the safety
information
◆ When a major disaster strikes, you can use your au
cellphone to access the “ 災害用伝言板 ” (Disaster Message
Board) on EZweb and register your current condition,
comments, and other information about your well-being.
◆ After you register information, it can be sent by mail to
family, friends, and other individuals you have registered
as a recipient of your Disaster Message Board information.
◆ Disaster Message Board information can be accessed by
inputting the phone number of an individual over EZweb or
the Internet.※
※ Disaster Message Board information can be accessed
from another type of cellphone (except for TU-KA), PHS,
or PC at http://dengon.ezweb.ne.jp/.
R Top Menu 災害用伝言板
(Disaster Message Board)
Access
method
http://dengon.ezweb.ne.jp/
I’m .
OK
6
Registration
Access
Disaster Message
Board top screen
Information screen
Information registration
screen
※ Registration contents are retained for up to 72 hours.
※ You can register up to 10 entries per phone number. Registering a new entry while there are already 10
registered entries, automatically overwrites the oldest entry.
※ You can view a Disaster Message Board demonstration at:
R →Top Menu→ auお客さまサポート
→ 調べる
→災害用伝言板(デモ版)
(au Customer Support)
(Information) (Disaster Message Board (Demo))
※ To view the Disaster Message Board in English, select the “English” option on the Disaster Message Board
top screen.
7
Contents
Cellphone Etiquette
Mind your manners! ........................................................................... 1
Cellphone Basics
Features ............................................................................................
Manner Mode and Easy Voice Memo ................................................
Checking Power, Signal Strength, and Battery Level ........................
Never use your cellphone while driving! ............................................
Beware of spam and one-ring calls! ..................................................
Disaster Message Board Service ......................................................
2
3
3
4
5
6
Contents .................................................................................................................................................. 8
Ready
Checking the Contents of the Package ...........................................
Names of Parts ................................................................................
Charging the Battery Pack ..............................................................
Turning On Power ............................................................................
Initial Values ....................................................................................
Personal Security Code and Passwords .........................................
Selecting English as the Display Language ....................................
Operation Basics .............................................................................
Display Indicators ............................................................................
Main Menu .......................................................................................
Initializing E-mail and EZweb ..........................................................
Looking Up Your Current Phone Number and E-mail Address ........
Changing Your E-mail Address ........................................................
10
11
12
14
14
15
16
18
19
20
22
23
24
Phone Call
Making a Call ...................................................................................
Answering a Call .............................................................................
Redialing(Outgoing Records/Incoming Records) ............................
One-ring Calls .................................................................................
Changing the Ring Tone ..................................................................
Adjusting the Ring Tone Volume ......................................................
Adjusting the Earpiece Volume during a Call ..................................
Turning On Manner Mode ................................................................
Turning On Easy Voice Memo .........................................................
Playing an Easy Voice Memo ..........................................................
26
26
27
27
28
30
31
31
32
33
Inputting Characters ................................................................................................................... 34
Inputting an E-mail Address ............................................................ 35
Inputting Pictographs and Useful Sentences .................................. 36
8
Address Book
Registering an Address Book ..........................................................
Editing an Address Book Record ....................................................
Adding Outgoing or Incoming Record Data to the Address Book ...
Dialing from the Address Book ........................................................
Pair Function
Registering a Pair Partner ............................................................... 43
Making a Phone Call, Sending Mail, Invite a Pair Partner
to a Hello Messenger Meeting ......................................................... 44
Mail
Using E-mail ....................................................................................
Using C-mail ....................................................................................
Creating and Sending E-mail Messages .........................................
Reading Received E-mail Messages ...............................................
Reading an E-mail Message with an Attached Photo or Movie ......
Replying to a Received E-mail Message .........................................
Avoiding Spam ................................................................................
Creating and Sending C-mail Messages .........................................
Reading Received C-mail Messages ..............................................
38
40
41
42
45
46
47
49
50
51
52
53
54
Hello Messenger ............................................................................................................................. 55
Contents
Displays the Hello Messenger Menu ............................................... 56
Invite the Members to the Meeting .................................................. 57
When You Get an Invitation Message to Join .................................. 58
Camera Features ............................................................................................................................ 59
Camera
Shooting a Photo .............................................................................
Recording a Movie ..........................................................................
Viewing Photos and Movies ............................................................
Attaching a Photo or Movie to an E-mail Message .........................
EZweb
Using EZweb ................................................................................... 66
Displaying the EZ Top Menu ............................................................ 67
Bookmarking Sites You Frequently Access ..................................... 68
Viewing Sites saved to the Favorite Sites ....................................... 69
Downloading Chaku-Uta® ................................................................ 70
Downloading Chaku-Uta-Full® .................................................. 71
Checking Charges ........................................................................... 72
EZ Channel-Plus ............................................................................. 73
61
62
64
65
EZ Navi Features ............................................................................................................................ 74
Security Navi Features ............................................................................................................. 76
EZ FeliCa ............................................................................................................................................... 78
Communicating with Reader/Writer ................................................. 79
Setting FeliCa Lock ......................................................................... 80
Using FeliCa-supported EZ apps .................................................... 81
EZ•FM
Before using EZ·FM ......................................................................... 82
Listening to the EZ·FM .................................................................... 83
PC Site Viewer Features .......................................................................................................... 85
PC Site Viewer
Mastering Operation Basics ............................................................ 86
Using Standby Assignment ............................................................. 87
Smart Mode
Entering Smart Mode ......................................................................
Exiting Smart Mode .........................................................................
Using the Smart Mode Main Menu ..................................................
Adding Data to the Address Book in Smart Mode ...........................
Using the Address Book in Smart Mode .........................................
Creating and Sending E-mail Messages in Smart Mode ................
Shooting a Photo in Smart Mode ....................................................
Viewing Photos in Smart Mode .......................................................
Teens Mode
Using Teens Mode ......................................................................... 100
Turning on Teens Mode ................................................................. 101
Other Functions
Security Setup Features ................................................................ 102
Extension Mode ............................................................................. 103
Troubleshooting
............................................................................................................................ 105
If you lose your W43CA ................................................................. 106
89
90
91
92
94
95
97
98
Index ....................................................................................................................................................... 108
9
Ready
All
Before using the W43CA, check the contents
of the package comes with your W43CA.
You should also familiarize yourself with
basic operations, like how to charge the
battery, how to turn the power on, etc.
set?
Checking the Contents of the Package
● W43CA
● Battery pack
(43CAUAA)
● Desktop holder ● Casio round-type
(43CAPUA)
earphone jack
conversion adaptor
01 (01CAQNA)
W43CA
● MDR-E0931
(sample) by SONY
● Casio USB cable 01
(01CAHUA)
● CD-ROM
● Warranty (Japanese)
● Operating Precautions
● Osaifu Keitai® Basic
(Japanese)
Manual
● Global Expert User’s
● LISMO! Announcement
Guide (Japanese)
● Basic Manual (Japanese)
● Instruction Manual (Japanese)
目次
目次/準備
ご利用の準備
au ICカード
通話
基本操作
ペア機能
メール
Hello Messenger
文字入力
アドレス帳/
ペア機能
メール/
Hello Messenger
カメラ
EZweb
W43CA
カメラ
by CASIO
データフォルダ
取扱説明書
microSDTM
メモリカード
EZweb
EZナビ
au Music
EZナビ
EZアプリ(BREW ®)
EZ FeliCa
EZ・FM
EZ FeliCa
EZ・FM
EZニュースフラッシュ
PCサイトビューアー
au My Page
赤外線通信
スマートモード/
ティーンズモード
PCサイトビューアー
その他機能
スマートモード
ティーンズモード
困ったときは/
遠隔オートロック
便利な機能
機能設定
English(英語)/
(中国語)
索引
auのネットワーク
サービス
付録/索引
クイックガイド
◎ The microSDTM memory card is not included.
◎ An AC adaptor is not included. It is up to you to purchase a common AC
adaptor 01 (option).
10
Names of Parts
■ Back
Infrared port
Earpiece
Camera lens
Photo light/
Standby light/Incoming/
Charge indicator(LED)/
Camera start indicator
W43CA
Main display
Ready
■ Front
Sub display
Center key
Cursor key
Stereo speaker
Optical sensor
Application
key
Charging terminals
Address book key
EZ/AF lock key
Mail key
Answer/
Pair key
Memo/Clear key
End/Power key
Battery pack/cover
Number keys
FeliCa mark
Microphone
Lock cancellation button
Built-in antenna ※
Strap eyelet
※ Take care to avoid covering the built-in
antenna with your hand when using the
phone, using EZweb, and when
accessing GPS information.
※Do not take out this card if
au IC card ※
not necessary as your
number is recorded on it.
■ Side
Flat-type earphone-microphone jack
Shutter key
Manner key
Light key
External
connection
jack
microSD memory card slot
11
Charging the Battery Pack
The battery pack that comes with the phone is not fully charged when
you purchase it. Be sure to charge the battery pack before using the
W43CA for the first time. Charging takes about 150 minutes.
You should recharge the battery pack whenever the battery level icon
or .
shows
Check the shape of the connectors
to ensure they are aligned correctly
when you connect them.
• Charging
: LED indicator
is lit red.
• Charging
complete
: LED indicator
goes out.
Connector
You can also use the
plug by extending the
prongs like this.
◎ You must purchase a common AC adaptor 01 (option) for charging. Note
that the configuration of the AC adaptor may be different from that shown
in the illustration above.
◎ Pull out the connector of the common AC adaptor 01 (option) straight so
as to be parallel to the W43CA or the desktop holder connector terminal
when you connect them.
12
Check the shape of the connectors to ensure they are aligned correctly before
you connect.
Trying to force a connection may damage the connectors.
Ready
Connect the common AC adaptor 01 (option) to the
desktop holder.
Fold out the power plug of the common AC adaptor 01
(option), and then plug it into a 100V AC power outlet.
Insert the W43CA into the desktop holder.
This will make the W43CA LED indicator light red, and the battery level icon to
change according to the following pattern:
➔
➔
➔
When charging is completed, the battery level icon will show
and the LED
indicator will go out.
To remove the W43CA from the desktop holder, holding the holder by hand and
remove W43CA.
※ You can connect the common AC adaptor 01 (option) to the W43CA directly to
charge the battery pack.
W4
3CA
Check the shape of the connector ends to
ensure they are aligned correctly (shown
above) when connecting.
13
Turning On Power
Hold down F for at
least 2.5 seconds.
The standby screen appears.
icon
Signal
Strength
Strong Medium
Weak
Very
Weak
Out of
Range
• Communication is not possible while the signal strength
icon is
(Out of Range).
• Communication may not be possible while the signal
strength icon is
(Very Weak).
Standby screen
icon
Battery
Level
Fully
Charged
High
Medium
Low
Fully
Extension Mode※
Discharged
• During charging, the battery level icon will change
according to the following pattern: ➔ ➔ ➔ .
• The battery level icon (Fully Charged) only shows
during charging.
※ Using Extension Mode
Using the Extension Mode, W43CA automatically shuts down the
radio wave after issuing the Low Battery Alert. This is quite a useful
function that you can still check Outgoing/Incoming Records,
Content of e-mail, Address Book, Schedule and so on when
necessary. In this case, you can only use the functions which needs
no radio wave.
Page
103
■ Turning off power
Hold down F for about one second.
Initial Values
The initial values are as follows.
Lock No.
Teens Lock No.
Caller ID
Incoming Display
Profile
14
1234
1234
ON
ON
Blank
Font Size
Add Book Char
Input
Mail Char
EZweb Char
Data Folder Char
Text Memo Char
Middle
Middle
Middle
Small
Middle
Middle
The W43CA lets you use the numbers and passwords described below.
Be sure to take steps so you do not to forget your numbers and
passwords. You will need them to perform various operations and to
access subscription services.
Ready
Personal Security Code and
Passwords
Personal Security Code
① For remote operation of the Voice Mail and Call Transfer from a
standard phone
Usage Examples ② For inquiries, applications, and service modifications using au
Customer Service Center voice guidance, au website, and EZweb
③ For changing e-mail settings
Initial Values
4-digit number you entered on your subscription contract
Lock No.
Usage Examples For modifying various phone settings
Initial Values
1234
Teens Lock No.
Usage Examples For modifying various phone settings in Teens Mode
Initial Values
1234
EZ Password
Usage Examples For entering and canceling subscriptions for EZweb fee-based content
Initial Values
4-digit number you registered for your first fee-based content subscription
Premium EZ Password
① For entering and canceling subscriptions for EZweb fee-based content
Usage Examples
paid for using “まとめてau支払い ” (combined au payment service)
② For purchasing products from EZweb sites that use “まとめてau支払い ”
(combined au payment service)
Initial Values
4 to 8-digit number you registered for your first “まとめてau支払い ”
(combined au payment service) payment
When your initial subscription date or change date for additional EZweb
options is after September, 2006, the EZ password and the premium EZ
password will be any 4-digit number you entered on your subscription contract.
15
Selecting English as the Display
Language
While the standby screen
is displayed, press c.
Use a to select “ 機能設定 ”
(Settings), and then press
c (OK).
Press 3 ( 画面表示/照明 )
(ScreenSetup/DisplayLighting).
16
5 (Set Language).
Ready
2 (English).
This selects English as the display
language.
Even if English is selected as the display language, schedule and other
dates are displayed in the format year/month/day. Folder names inside of
the Data Folder are also displayed in year/month/day format.
17
Operation Basics
u • Selects news flash telop,
■ Key functions
•
l • Displays incoming records.
r • Displays outgoing records.
Returns to the previous
menu screen.
• Selects an item.
•
Scrolls forward one menu
screen.
• Selects an item.
•
d • Displays the standby
•
%
L
•
•
•
news flash window.
Selects an item.
shortcut icon.
Selects an item.
c • Displays the main menu.
Displays the EZ apps
menu.
&
•
Applies an item.
•
Displays the address book.
Creates a new address
book (hold down for about
one second).
•
E-mail
C-mail (hold down for
about one second)
R
N • Dials/answers a phone call.
• Displays the Pair function.
•
Displays the EZ menu.
F • Toggles power on and off.
• Hangs up.
• Terminates a function.
• Returns to the standby
screen.
C • Memo
• Toggles Easy Voice Memo
on and off (hold down for
about one second).
• Deletes a character.
• Returns to the previous
menu screen.
0 ∼ 9*#
• Inputs phone number.
• Inputs text character.
■ Side key functions
( • Toggles Manner Mode on and off
(hold down for about one second).
)
v • Shutter release
•
Starts photo (hold down for about one second).
Standby light illuminates when held down for
more than one second.
• Photo light illuminates when shooting a photo.
•
◎ If you lose track of where you are or if you make a mistake
18
Press C to scroll back to the previous screen.
Press F to return to the standby screen.
◎ When
is in the lower right corner of the photo or movie screen,
pressing 0 will display key help.
◎ Holding down c for about one second toggles side key’s disabling
feature on and off while W43CA is folded. To cancel the side key’s
disabling feature, follow the above procedure with W43CA opened.
Display Indicators
12 34 5 678 9
!
1
Signal strength
2
Battery level
3
The microSDTM memory card (commercial item)
is inserted into the cellphone.
4
During a call
)
5
/
6
7
~
"
# $% &
Main display
1 2
EZ apps (BREW®)/Hello Messenger on
Unread mail
/ /
au Music Player/SD-Audio Player/EZ•FM on
8
Key guidance on the EZweb screen
(while browsing) or the EZ Channel-plus
program screen (while playback), etc.
9
Current time
The date and time are set automatically.
!
FeliCa Lock on
"
Selects the user defined icons such as calculator,
Mobile Dictionary, Emission Off Mode, Mode
Settings, Extension Mode, Note Pad 01,
“カシオからのご案内” (information from Casio),
Note Pad 02, “auからのご案内”(information from au),
by pressing d and a
#
Easy Voice Memo on
$
Manner Mode on
%
Ring tone off
&
Vibrator on
(
EZ Channel-Plus is in use.
(
9
!#
)
ー
News flash telop
Sub display
(When phone is folded)
~
ー
News flash window
67
Ready
The following explains the main icons that appear on the standby screen.
■ Key symbols used in this manual
The cursor key described in this manual using the key
symbols shown below.
u or d key: j
l or r key: s
u, d, l or r key: a
19
Main Menu
Pressing c while the standby screen is displayed displays the main menu.
Use a to select the icon, and then press c (OK) to access the
function associated with the icon.
Camera
Music
microSD Menu
Hello Messenger
Data folder
EZ FeliCa Menu
Function/Setup
W-Scene Settings
Watch/Calendar
Accessories
PC site viewer Menu
EZ·FM
■ Using the Main Menu
Example: To display the setting screen from the main menu.
Press a to select
“Settings,” and
c
then press c (OK).
C returns to the
Standby screen
previous screen.
C returns to the
Main menu
previous screen.
F returns to the standby screen.
20
Setting screen
■ Using Soft Keys
Left
Center Right
Left soft key
%
Center soft key c
Right soft key
&
Ready
Soft keys are the keys you use to execute the functions along with the bottom
of the screen. The table below explains how to assign the soft keys to the onscreen functions. Note that the function of each soft key depends on the
currently displayed screen.
Executes the function on the left.
Executes the function on the center.
Executes the function on the right.
■ Using Menus
Pressing the soft key that corresponds to the “Menu” at the bottom of the
display will display a menu of various operations related to the function you
are currently using.
Example: To open the photo monitor menu screen from photo monitor screen.
Press a, to select
c
“Camera,” and then
press c (OK).
C returns to the
C returns to the
previous screen.
previous screen.
Main menu
Standby screen
Camera menu
screen
C returns
to the
previous
screen.
C returns to
the previous screen.
Or, & (Close).
F returns to the
standby screen
& (Menu)
Photo monitor
menu screen
1 (Photo)
Photo monitor
screen
21
Initializing E-mail and EZweb
An EZweb subscription is required to use e-mail and EZweb. If you did
not subscribe when you purchased your phone, contact your nearest
au shop or the au Customer Service Center.
※You will be assigned an e-mail address automatically when you perform the
EZweb initialization procedure.
While the standby screen
is displayed, press L.
Press c (OK).
Wait until the phone connects to the
server for initialization.
After your automatically
assigned e-mail address
appears, press c (OK).
Pressing R/% also allows you to make initial settings.
22
My phone
number and
mail address
Ready
Looking Up
Your Current Phone
Number and E-mail
Address
While the standby screen
is displayed, press c.
Use a to select “Settings,”
and then press c (OK).
Press 0 (Profile).
Your current phone number and e-mail
address appear.
You can also look up your phone number and e-mail address by pressing
c, and then 0 while the standby screen is displayed.
23
Changing Your E-mail Address
E-mail address
△△△@ezweb.ne.jp
Part you can change
Domain name
While the standby screen
is displayed, press L.
Press 0 (E-Mail Setup).
Press 7 (Other Setup).
When the EZweb connection
confirmation screen appears, press
1 (Yes).
Press 1 (E メールアドレ
スの変更 ) (Change E-mail
Address).
24
Ready
Enter your Security Code,
press c (OK), use j to
select “ 送信 ” (Send), and then
press c (Select). Use j to
select “ 承諾する ” (Accept),
and then press c (Select).
Use j to select the text
box, and then press
c (Edit). Enter the e-mail
address you want, and
then press c (OK).
To input an e-mail address
→ “Inputting an E-mail Address” (page 35)
Use j to select “ 送信 ”
(Send), and then press
c (Select).
The e-mail address confirmation screen
appears.
Press j to select “OK,”
and then press c (Select).
The message “ 正常に変更されました。
”
(Update is complete.) appears to indicate
that your e-mail address has been
changed.
◎ Your Security Code is the 4-digit number you entered on your
subscription contract. If the wrong Security Code is entered three times a
day, the setting operation will be disabled until the following day.
◎ If your e-mail address won’t change in step 7:
The new e-mail address you entered may be registered by someone else
already. Try entering a different address.
25
Phone Call
Making a Call
While the standby screen is displayed, use
the number keys (0 to 9) of the keypad
to enter the phone number you want to call.
When calling a standard phone, you need to enter the area code.
Press N.
After you finish a call, press F to hang up.
Send Methods
Displayed when you press c (Call) in step 2.
Call
: Your phone number is provided to the party you are calling in
accordance with the caller ID setting of your phone.
184 Add : Your phone number is not provided to the party you are calling.
186 Add : Your phone number is provided to the party you are calling.
Answering a Call
Press N to answer an incoming call.
After you finish a call, press F to hang up.
Display for Incoming Calls
If the caller’s name is in your address book, it appears on the
display. If not, only the caller’s phone number is displayed.
A message appears when the phone number of the caller is
not provided for some reason.
ID Unsent : The caller’s phone refused to send its phone
number.
Pay Phone : The call is from a pay phone.
Not Support : The call is from a phone that does not support
caller ID.
Missed Call Notification
The message “ Call X” appears on the display if you did
not answer one or more calls. Press c (OK) to check
incoming records (caller phone number, etc.).
To redial a number
→“Redialing (Outgoing Records/Incoming Records)” (page 27)
26
Redialing
(Outgoing Records/
Incoming Records)
Phone Call
While the standby screen
is displayed, press s.
r : Displays outgoing records.
l : Displays incoming records.
Use j to select the
record whose number you
want to dial, and then
press N.
The phone stores up to 50 records each for the outgoing records and
incoming records. When a record is created while there are already 50
records in memory, the oldest current record is deleted automatically to
make room for the new one.
One-ring Calls
■ What is a “one-ring call”?
A “one-ring call” is an incoming call that rings your phone only once, which
aims it to be stored in your incoming records. If you redial the number
shown in your incoming records, often you are connected to a dating
service or some other service that may bills you very high charges. Always
keep in mind that it is a good idea to avoid calling back unfamiliar numbers.
■ One-ring call indicator
The icon indicates an incoming call you did not answer.
The icon indicates an incoming call that rang for four
seconds or less.
These calls may be one-ring call with high possibility.
27
Changing the Ring Tone
While the standby screen
is displayed, press c.
Use a to select “Settings,”
and then press c (OK).
Press 2 (Sound/Vib/
LED).
Press 1 (Incoming Call).
28
Press 2 (Melody).
To hear the currently selected ring tone,
press % (Check).
Phone Call
Press 1 (Fixed Sound).
Use j to select the ring
tone you want, and then
press c (OK).
The ring tone is set.
◎ The initial setting is “Incoming Tone1.”
◎ You can also download a “Chaku-Uta®” from the Internet and use it for
your ring tone.
→“Downloading Chaku-Uta®” (page 70)
29
Adjusting the Ring Tone
Volume
To adjust the ring tone volume, perform steps 1
through 3 under “Changing the Ring Tone” (page 28),
and then continue with the following steps.
Press 1 (Incoming Call).
Press 1 (Volume).
To hear the ring tone at the current
volume setting, press % (Play).
Use j to adjust the ring
tone volume, and then
press c (OK).
u : Increases volume.
d : Decreases volume.
Step-up : Ring tone volume gradually increases.
Step-down: Ring tone volume gradually decreases.
Mute
: Ring tone does not sound.
To display the “Step-up” and “Step-down” settings, select volume level 5,
and then press u.
To display the “Mute” setting, select volume level 1, and then press d.
30
Beep,
beep . . .
Adjusting the Earpiece
Volume during a Call
Hello?
Phone Call
During a call, use j to
adjust the volume.
u: Increases volume.
d : Decreases volume.
You can adjust the earpiece volume (level 1-6).
When you set the maximum volume (level 6),
is displayed on the screen.
Turning On Manner Mode
While Manner Mode is set to on, the phone alerts you
to incoming calls by vibrating.
While the standby screen
is displayed, hold down
( for about one second.
This turns on Manner Mode, the
icon appears on the display while
Manner Mode is turned on.
Turning on Manner Mode also turns on Easy Voice Memo, which is indicated
by
on the display.
While Manner Mode is set to on, the phone vibrates without sounding its ring tone.
To turn off Manner Mode, hold down ( for about one second.
31
Turning On Easy Voice
Memo
While the standby screen
is displayed, hold down
C for about one second.
This turns on Easy Voice Memo, the
icon appears on
the display while Easy Voice Memo is turned on.
You can use Easy Voice Memos (up to 4 memos), and each memo can contain
up to 20 seconds recording time.
If a new Easy Voice Memo is recorded when there are already four memos in
memory, the oldest, unprotected memo that has already been played back is
deleted automatically to make room for the new one. Protected Easy Voice
Memos are not deleted.
To turn off Easy Voice Memo, hold down C for about one second.
Using the Voice Mail
The Voice Mail can be used to answer the phone and take messages when
the phone is turned off, or when you are in a location where signal
reception is not possible.
32
Playing an Easy Voice
Memo
Phone Call
When there is a recorded Easy
Voice Memos
The message “ Call” and
“ EasyVoiceMemo” appear on the
standby screen.
Select “ Call,” and then
press c (OK).
The incoming records list appears.
Use j to select the
record with the icon,
and then press c (Disp).
The incoming record detail screen
appears.
Use j to select
“ EasyVoiceMemo,” and
then press c (Play).
The easy voice memo plays back.
To delete an Easy Voice Memo, press C42 while the standby
screen is displayed. Select the Easy Voice Memo you want to delete, press
& (Menu), and then 1 (Delete). Next press 1 (Delete One), and then
press 1 (Yes).
33
Inputting Characters
Input characters using keypad keys 0
through 9.
The table below shows the characters each
key cycles through when you press it.
d
e
f
Number of Presses
1
2
3
4
5
6
7
8
1
.
@
-
_
/
:
~
1
2
a
b
c
A
B
C
2
Key
3
d
e
f
D
E
F
3
4
g
h
i
G
H
I
4
5
j
k
l
J
K
L
5
6
m
n
o
M
N
O
6
7
p
q
r
s
P
Q
R
8
t
u
v
T
U
V
8
9
w
x
y
z
W
X
Y
0
0 . @ - _ / : ! ? ~ ( )
*
Toggles between upper case and lower case (Example: a ⇔ A).
#
Returns to the previous character.
N
Undoes the last delete operation.
*#
9
S
7
Z
9
+ , ^ ; < = > $ ¥ % & [ ] ’ ` { } ˝
• In order to input consecutive characters that are assigned to the same key, press r to
move the cursor (highlighted), then press the same key to input next character.
Allowable Characters in Your E-mail Address
Your e-mail address (the part at the left of “@”) can contain up to 30 characters,
including single-byte English lower case letters, hyphens (-), periods (.) and
underbars (_).
A period (.) or a zero (0) cannot be used as the first character.
Characters and symbols that are shaded in the above table cannot be used at
the left of “@” in the address format “△△△@ezweb.ne.jp.”
You can input a period (.) or “at” symbol (@) by pressing 1.
34
Inputting an E-mail
Address
mark@
■ Inputting “mark@ezweb.ne.jp”
In this example, we will input “mark@ezweb.ne.jp” for
“<E-Mail Add1>.” To input “<E-Mail Add1>,” perform
steps 1 through 6 under “Registering an Address Book”
(page 38), and then perform the following steps.
To input “m”: Press 6 once.
To input “a”: Press 2 once.
To input “r”: Press 7 three times.
To input “k”: Press 5 twice.
Inputting Characters
Input “mark.”
Press & (Menu).
Press 1 (Emoticon/Useful
Sentence), and then 2
(Useful Sentence).
Use j to select
“@ezweb.ne.jp,” and then
press c (OK).
“mark@ezweb.ne.jp” is inputted.
You could also input “@ezweb.ne.jp” by
pressing 02.
35
Inputting Pictographs
and Useful Sentences
The following procedure shows how to input
pictographs and useful sentences into the body
text when creating a new e-mail message.
Press % (Char), and then
6 (Pictograph).
You can also select a pictograph by
pressing #.
Use a to select the
pictograph you want, and
then press c (Select).
Use L and R to scroll through the
various categories of pictographs.
To input consecutive pictographs, press
& (Serial).
Press & (Menu), 1
(Emoticon/Useful Sentence),
and then 2 (Useful
Sentence).
36
Use j to select the useful
sentence you want, and
then press c (OK).
Here we will select “Happy birthday!.”
You can also input “Happy birthday!” by
pressing 17.
Inputting Characters
The following shows the input screens for symbols (double-byte) and
emoticons.
Symbol (Double-byte) Input
In step 1 of the above procedure, press % (Char), and
then 5 (&@) to display the “FullSym” (double-byte
symbol menu).
Emoticon Input
In step 3 of the above procedure, press
1 (Emoticon) in place of 2 (Useful Sentence) to
display the emoticon menu.
You can also display the emoticon menu by pressing
* in place of & (Menu) in step 3.
37
Address Book
Registering an Address
Book
While the standby screen
is displayed, hold down &
for about one second.
Select “ <Name>,” and
then press c (Edit).
Enter the name, and then
press c (OK).
The
<Reading> is generated
automatically when you enter a name.
To input text
→ “Inputting Characters” (page 34)
Use j to select
“ <Phone Number1>,”
and then press c (Edit).
38
Enter the phone number,
and then press c (OK).
When entering the number of a standard
phone, be sure to include the area code.
If you do not want to enter an e-mail
address, jump to step 8.
Enter the e-mail address,
and then press c (OK).
Address Book
Use j to select
“ <E-Mail Add1>,” and
then press c (Edit).
To input an e-mail address
→ “Inputting an E-mail Address”
(page 35)
Press & (Reg).
◎ The Address Book can contain up to 700 records.
◎ Address Book Records are numbered from 000 through 699. A new
record is automatically assigned to the lowest available unused record
number.
◎ An Address Book Record can also contain a keyword, website URL,
street address, birthday, and other personal information.
39
Editing an Address
Book Record
Address...
Birthday...
Group...
Example: To edit the phone number of “Tom Carter”
While the standby screen
is displayed, press &, use
a to select the record
you want to edit, and then
press & (Menu).
Press 3 (Modify), and
then 1 (Overwrite).
Use j to select
“ 0900006XXXX,” and
then press c (Edit).
Make the changes you
want, press c (OK), and
then & (Reg).
To delete characters, press C.
40
Adding Outgoing or
Incoming Record Data
to the Address Book
r: Displays outgoing records.
l: Displays incoming records.
Address Book
While the standby screen is
displayed, press s, use
j to select the phone
number you want to save,
and then press & (Menu).
Press 4 (Reg Add Book).
Press 1 (Reg New).
To enter the name, use the procedure
starting from step 2 under “Registering
an Address Book” (page 38).
41
Dialing from the Address
Book
While the standby screen is
displayed, press &, and
then use a to select the
record whose phone
number you want to dial.
Press c (Disp).
The details screen of the record
appears.
Use j to select the
phone number, and then
press N.
42
Hello?
Pair Function
You can save up to five phone numbers (like
frequently used ones from the address book).
You can make calls, send mails to or use Hello
Messenger with these saved numbers (called Pair
Partners) more easily.
Registering a Pair Partner
If the Pair partner is not registered, the
confirmation screen appears. Press c (OK).
Use s to select the 1 through 5 tab
where you want to register the Pair partner.
Pair Function
While the standby screen
is displayed, press N.
Use j to select “Register •
Check,” and then press
c (OK).
Press 1 (Register).
Use a to select the
address book record for the
person you want to register
as a Pair partner, and then
press c (Select).
When there is more than one phone number/e-mail address registered in the address
book, the Pair function phone number/e-mail address selection screen will appear.
Press c (Reg).
43
Making a Phone Call,
Sending Mail, Invite a
Pair Partner to a Hello
Messenger Meeting
While the standby screen
is displayed, press N.
Use s to select the Pair
partner.
Use j to select “Call,”
and then press c (OK).
Selecting “Send E-Mail”/“Send C-Mail,” and then pressing c (OK) will display
a screen for composing and sending an e-mail/a C-mail message. Next,
continue from step 5 of the procedure under “Creating and Sending E-mail
Messages” (page 47)/“Creating and Sending C-mail Messages” (page 53).
After selecting “Hello Messenger,” pressing c (OK) will display the screen for
inviting a Pair partner to a Hello Messenger meeting. Next, continue from step
4 of the procedure under “Invite the Members to the Meeting” (page 57).
In order to register a person as a Pair partner, that person’s name, phone
number, and other information need to be registered in the address book
beforehand. Use the procedure under “Registering an Address Book” (page
38) to create the required record before trying to register a person as a Pair
partner.
44
Mail
EZweb subscription required
Your W43CA supports two types of mail:
e-mail and C-mail.
Using E-mail
Mail
To use e-mail, you need to subscribe to an EZweb service. If you did
not subscribe when you purchased your phone, contact your nearest
au shop or the au Customer Service Center.
In addition to an EZweb subscription, you also need to perform an
initialization procedure before you can use e-mail. If you have not
performed initialization yet, refer to “Initializing E-mail and EZweb”
(page 22).
E-mail makes you possible to exchange mails with a PC and with
another cellphone that supports e-mail function.
You can send mail messages that contain up to 5,000 double-byte
characters (10,000 single-byte characters), and you can attach photos
and movies to e-mail messages.
Page 47
※You can send an e-mail up to five addressees at a time.
※You can send up to 1,000 e-mail messages (each addressee counts as a
separate message) per day.
※The sending and receiving operations may take longer when a mail message
has data attached.
W43
CA
Internet
W43CA
Sent using an e-mail address.
Example: △△△ @ezweb.ne.jp
E-mail can be sent to
another au cellphone or
cellphone of other
manufacturer’s.
E-mail can be sent to a PC.
45
Using C-mail
C-mail lets you exchange text messages that
contain up to 50 double-byte characters (100
single-byte characters) with another au
Page 53
cellphone that supports C-mails.
W43CA
C-mail Center
Cente
W43
CA
Sent using a phone number.
Example: 090-0001-XXXX
Received using a phone number.
Example: 090-0002-XXXX
C-mail can be sent to
another au cellphone.
About C-mail safe block function
・C-mail safe block function blocks C-mails that contain accessing
URLs (http://△△△, https://△△△) or phone numbers in its body text.
C-mail safe block function is set to on by default. If you want to
receive C-mails that contain accessing URLs or phone numbers
in their body texts, you can disable this function to receive such
C-mails.
46
Creating and Sending
E-mail Messages
While the standby screen
is displayed, press L, and
then press
1 (Create New).
Mail
Select
, and then press
c (Edit).
: Address to which the e-mail will
be sent.
You can send an e-mail up to five
addressees at a time.
Press 1 (Address Book),
use a to select an
addressee, and then press
c (Select).
You can select an addressee from
sending records, receiving records, or My
Address, or you can enter an address.
Use j to select the e-mail
address you want to enter,
and then press c (OK).
Continued on the next page 47
Use j to select
, and
then press c (Edit).
: Subject of the e-mail message.
Enter the subject, and
then press c (OK).
Use j to select
, and
then press c (Edit).
: Body of the e-mail message.
Enter the body text, and
then press c (OK).
Press % (Send) or N.
The message “Sent.” appears on the
display after the e-mail message is sent.
48
Reading Received
E-mail Messages
When you receive an e-mail
The message “ E-Mail” and
appear on the standby screen.
Received
e-mail icon
Mail
Select “ E-Mail,” and
then press c (OK).
Press c (OK).
: Indicates an unread message.
: Indicates an already read message.
Use j to select the unread
e-mail you want to view, and
then press c (Disp).
The received e-mail message appears.
If all of the message cannot be
displayed, press d to scroll.
Use L and R to scroll between messages.
Press C to return to the e-mail message list.
49
Reading an E-mail Message
with an Attached Photo or
Movie
Example: To see a photo attached to an e-mail.
Use j to select the
e-mail message, and then
press c (Disp).
Use j to select a file name,
and then press c (Play).
◎ Depending on the size of the photo or movie file, the file may not appear
within the mail in step 2 of the above procedure. If this happens, select
the file name and press c (Rcv), c (Play).
◎ The sending and receiving operations may take longer when a mail
message has data attached.
◎ Certain signal conditions may also cause e-mail sending and receiving to
take longer time than normal.
50
Replying to a Received
E-mail Message
ly
Rep
To reply to an e-mail message, perform steps 1
through 3 under “Reading Received E-mail
Messages” (page 49), and then perform the
following steps.
Press % (Reply).
Mail
Press c (Edit), and then
enter the body text.
is prefixed with “Re:,” and the
body text of the e-mail is quoted.
For the remainder of this procedure
→ Perform the procedure starting from
step 7 under “Creating and Sending
E-mail Messages” (page 47).
51
Avoiding Spam
It is recommended that you use our mail filter
function to block spam.
You can use “Supportive settings” to easily
configure mail filter settings by answering
questions that appear on the display.
■ Configuring Mail Filter Settings
Example: To access the “サポート設定 ” (Supportive settings)
1 While the standby screen is displayed, press L.
2 Press 0(E-Mail Setup)
6(Mail Filter)
1(Yes).
3 Use j to select “ 次へ ” and then press c(Select).
4 Enter your Security Code, press c(OK).
Use j to select “ 送信 ” and then press c(Select).
Next, follow the instructions that appear on the display.
■ “ カンタン設定 ” (Simple Settings)
“ サポート設定 ”
(Supportive settings)
You can choose filtering options by
answering our questions
It is recommendable for those who want to
check the filtering conditions one by one.
“ フィルターレベル(高)”
(Filter level (Strict))
You can block the all incoming mails from
PC.
It is recommendable for those who use
only cellphones to send e-mails.
You can block the incoming e-mails from
specified senders.
It is recommendable for those who are
bothered by specified spam senders.
You can block the incoming e-mails
containing “ 未承諾広告※ ” (Unsolicited
advertisement) in their titles, and “ なりす
ましメール ” (Spoof e-mail)
It is recommendable for all e-mail users.
“ フィルターレベル(中)”
(Filter level (Medium))
“ フィルターレベル(低)”
(Filter level (Normal))
You can prevent spam by changing your e-mail address. See “Changing
Your E-mail Address” (page 24) for information about how to change your
e-mail address.
52
Creating and Sending
C-mail Messages
Hold down
...
While the standby screen is
displayed, hold down L for
about one second, and then
press 1 (Create New).
Mail
Select
, and then press
c (Edit).
Press 1 (Address
Book), use a to select an
addressee, and then press
c (Select).
You can also select a phone number
from sending records or receiving
records, or you can enter an address.
Use j to select the phone
number you want to enter,
and then press c (OK).
Continued on the next page
53
Use j to select
, and
then press c (Edit).
Enter the body text, and
then press c (OK).
Press % (Send) or N.
When the C-mail reaches the other
party, the message “Completed.”
appears, and the message is stored in
your sending records.
Reading Received C-mail Messages
When you receive a C-mail.
The message “ C-Mail” and
appear on the standby screen.
Select “ C-Mail,” and
then press c (OK).
: Indicates an unread message.
Use j to select the unread
C-mail you want to view, and
then press c (Disp).
The received C-mail message appears.
Use L and R to scroll between messages.
Press C to return to the C-mail message list.
54
Received
C-mail icon
Hello Messenger
“Hello Messenger” is like a portable chat room which allows you
to send text, sound and photo in real time to all the chatters (using
au cellphone supporting this service).
All chatters are represented by cartoon-style characters they
selected. The host can invite up to 4 people from the address book
entries.
Hello
Host
Hello
Hello Messenger
Member 1
Send text messages.
W43CA
Member 2
Voice call
Member 4
Member 3
Shoot and send the photos.
Send text messages.
◎Due to the conditions like frequent use, location, or signal conditions, the
time you can use for meeting may become shorter than usual.
◎Two to five people can use this service at the same time.
55
Displays the Hello Messenger Menu
While the standby screen
is displayed, press c.
Use a to select “Hello
Messenger,” and then
press c (OK).
When you start Hello Messenger for the
first time, press c (OK) and select your
own cartoon-style character, then press
c ( 設定 )(Setting).
Item
スタート (Start)
コメントログ (Comment log)
ヒント (Hint)
オプション (Option)
Hello Messenger
menu
Outline
Select the members to invite to the meeting
Displays Comment log (meeting records)
Displays operations basics
Makes various settings
■ Character list
From these 12 original characters, you can select the one as your own character.
56
©Yamashita Kohei/mountain mountain
Invite the Members to the Meeting
You can invite the members to start the meeting. To start the meeting,
perform steps 1 through 2 under “Displays the Hello Messenger
Menu” (page 56), and then continue with the following steps.
Use j to select “ スター
ト ” (Start), and then press
c ( 選択 )(Select).
Hello Messenger
Use j to select
“ アドレス帳 ” (Address
Book), and then press
c ( 選択 )(Select).
Use a to select the
members.
To select the members from the address book entries,
perform steps 1 through 2 under “Dialing from the Address Book” (page 42).
Press c (Select).
“Select Phone Number” screen appears
and select the phone number and press
c (OK).
The member list appears.
Your name is shown on the top of the list (or “ 私 ” (Me) is
shown when your name is not registered in the profile).
Your name or “ 私 ” (Me) cannot be changed or deleted.
“ 私 ” (Me) is shown on the list when your name is not registered in the profile.
To add members, select the blank column and press
c ( 選択 )(Select) , and repeat steps 2 through 3.
Press & ( お誘い )(Invite).
The member registered in your list gets
an invitation message.
When you see “ ○○さんが参加しまし
た ” (XX joined) appears on the display,
you can start meeting with the member.
Continued on the next page 57
◎You can register the member from “ハローランキング” (Hello Ranking) or
“グループ” (Group).
◎You can activate Hello Messenger from address book, outgoing/incoming
records, phone number input screen to start the meeting.
When You Get an Invitation
Message to Join
When you get an invitation message to join, ring tones sounds or
your cellphone vibrates. The invitation screen (inviting you to join
the meeting) appears. When you set “ 着信モード ” (Incoming
Mode) to “ 自動応答モード ” (Auto Response), no ring tone sounds,
and you can start meeting without any operation.
When you get an invitation message to join
The message (inviting you to join the
meeting) appears on the display.
Use j to select “ 参加 ”
(Join), and then press
c(OK).
On the incoming screen, you can see
the host’s name, total number of the
members, and the time of acceptance.
◎With Manner Mode set, no ring tone sounds from speaker or earphones.
◎Even with Manner Mode set, vibrator setting for “ハロー着信音” (The
Ring Tone for Hello Messenger) has the priority over the Manner Mode.
58
Camera Features
Your W43CA comes with a built-in 2.1-megapixel, 2.07-million
effective pixel camera to shoot photos and record movies.
You can attach the photos and movies that you shot/recorded to
e-mail messages.
Using the Camera
Shooting a Photo (page 61)
1
Recording a Movie (page 62)
Use your images for W43CA functions!
2
W43CA
Camera
You can use photos you shot for
the standby screen, for the
image that appears while the
ring tone is sounding, and in
your address book.
W43
CA
Send images by e-mail!
Within 500KB※, you can send a photo or a
movie (shot or recorded with Mail Mode) as
an e-mail attachment.
※ Certain signal conditions may cause e-mail
sending and receiveing to take longer time
than normal.
59
Tips for Better Photos
Shooting a VGA, SXGA, or UXGA size image
Do not cover the lens or
optical sensor with your
hands. Hold the camera
securely with both hands.
Use your thumb to press
c (Shutter) to release the
shutter.
Do not cover the lens or optical sensor
with your hands. Hold the camera
securely with both hands.
Use the index finger of your right hand to
press b to release the shutter.
W43CA
Shooting a Phone, Wallpaper size, etc. image
Tips for Avoiding Hand Movement
● Remain steady by keeping your arms lightly against your sides and standing with your feet about
shoulder width apart. Having your arms away from your side or extended in front of you can cause
blurred images.
● When you press the shutter button, remain still until your shutter tone finishes sounding. This is
especially important when shooting where lighting is dim.
● A self-timer is also provided for shooting photos. With the self-timer, you do not need to press the
shutter button to shoot a photo, so there is less chance of a blurred image caused by accidental
movement of the phone. Auto focus つ い て
オ ートフォーカスに
W43CA has built-in auto focus function. You can shot photos with the subject properly
focused simply by pressing the shutter key.
Photo and Movie Sizes
The following shows the sizes of the photos and movies that can
be recorded with your W43CA.
Photo Sizes
Phone
Wallpaper ※
WideWallpaper
VGA
SXGA
WIDE
UXGA
120 × 160
240 × 320
240 × 400
640 × 480
1280 × 960
1600 × 960
1600 × 1200
※ The image size is the same as “Wallpaper” when Coupling
Shot, Updown Shot, Serial Shot, or Wallpaper is selected
as the recording mode.
Movie Sizes
Mail Mode
Video Mode
60
Standard S
Standard M
High Quality M
High Quality L
QVGA
96 × 80
128 × 96
176 × 144
320 × 240
Camera
Shooting a Photo
While the standby screen
is displayed, press c, use
a to select “Camera,” and
then press c (OK).
Camera
Press 1 (Photo).
Point the lens at the
subject, and then press
c (Shutter).
The phone emits a shutter sound.
Note that the phone emits the shutter sound even if it is in
Manner Mode.
You can also press b in place of c.
Check the subject through the monitor screen (within the
), and release the shutter.
area indicated as
Press c (Save).
The display shows the message
“Saved to data folder (Phone).,” and
then returns to the photo monitor
screen.
Photos you shot are saved to the “Photo
Folder,” which is in the Data Folder.
61
Recording a Movie
While the standby screen
is displayed, press c. Use
a to select “Camera,” and
then press c (OK).
Press 2 (Movie), point
the lens at the subject, and
then press c (Rec).
The phone emits a shutter sound to
signal the start of recording.
Note that the phone emits the shutter
sound to signal the start of recording
even if it is in Manner Mode.
You can also press b in place of c.
To stop recording, press
c (End).
Even if you do not press c (End),
recording will stop automatically after
about 15 seconds.
The phone emits a shutter sound when
recording stops.
Press c (Save).
The display shows the message “Saved
to data folder (Phone).,” and then
returns to the movie monitor screen.
Movies you recorded are saved to the
“Movie Folder,” which is in the Data Folder.
62
■ Meanings of the Photo Titles
The initial photo mode setting when you purchase your W43CA is “Phone
Mode (Wallpaper 240×320)”.
Meanings of the Photo Titles in the “Photo Folder,” which is in the Data Folder.
Example of a Photo Title 061024_1123
Date: October 24, 2006
∼0001
Serial Number
Time: 11:23 a.m.
When You Shot Photos Mistakenly
If the shot photo is not what you want, press C or l in step 4 of the
above procedure.
Next, repeat step 3 to reshoot.
Camera
Displaying Key Help
(key help icon) is displayed in the lower right corner of the
While
screen, press 0 to display key help.
Press 0 again to exit key help.
■ Meanings of the Movie Titles
The initial movie mode setting when you purchase your W43CA is “Mail Mode
(High Quality L 176×144)”. The maximum recording time in “Mail Mode” is
15 seconds.
Meanings of the Movie Titles in the “Movie Folder,” which is in the Data Folder.
∼0001
Example of a Movie Title 061024_1123
Date: October 24, 2006
Time: 11:23 a.m.
Serial Number
※ “S_” is added to the beginning of the movie title when the movie size is
“Standard S.”
When You Recorded Movies Mistakenly
If the recorded movie is not what you want, press C or l, and then
press 1 (Cancel) in step 4 of the above procedure.
Next, repeat step 2 to rerecord.
Displaying Key Help
(key help icon) is displayed in the lower right corner of the
While
screen, press 0 to display key help.
Press 0 again to exit key help.
63
Viewing Photos and
Movies
While the standby screen
is displayed, press c,
use a to select “Data
folder,” and then press
c (OK).
Use j to select “Photo
Folder,” or “Movie Folder,”
and then press
c (Detail).
Selecting “All Data” displays a list of all
photos and movies in the “Photo
Folder” or “Movie Folder.”
Use j to select the dated
(by recording date) folder,
and then press
c (Detail).
A list of all movies that were recorded
on that day are displayed.
Use a to select the
photo or movie you want
to play, and then press
c (Disp/Play).
The photo or movie displays/plays.
※ To pause movie playback, press c ( ).
Playback will stop automatically when the movie ends.
64
Attaching a Photo or Movie
to an E-mail Message
Perform the procedure from step 1 to 3 under “Shooting a Photo” (page
61) or “Recording a Movie” (page 62), and then perform the following
steps.
Press % (E-Mail), and
then press 1 (Attach).
Photos you shot are stored in the
“Photo Folder” and movies are stored in
the “Movie Folder,” (those folders are in
the Data Folder).
Camera
Perform the procedure starting from step 2 under
“Creating and Sending E-mail Messages” (page 47) to
create an e-mail message.
※ A movie attached to an e-mail can be played only on the cellphone that
supports movie playback or on a PC.
65
EZweb
EZweb subscription required
Using EZweb
To use EZweb, you need to subscribe to an
EZweb beforehand. If you did not subscribe
when you purchased your phone, contact your
nearest au shop or the au Customer Service
Center.
In addition to an EZweb subscription, you also need to perform an
initialization procedure before you can use EZweb. If you have not
performed initialization yet, refer to “Initializing E-mail and EZweb”
(page 22).
EZweb allows you to access to Chaku-Uta®, the latest news, and other
web-based contents.
While the standby
screen is displayed
Internet
W43CA
Wallpaper
R ➔ c(OK)
Games
Latest news
Weather reports
Chaku-Uta®
66
Traffic reports
Chaku-Uta-Full®
Displaying the EZ Top Menu
While the standby screen is displayed,
press R, use s to select “EZweb,” and
then press 1 (Top Menu).
1
1
2
3
2
3
4
4
5
5
6
6
8
7
8
9
!
"
#
$
%
&
(
9
!
"
ビジネス&ニュース(Business & News)
Provides the latest information such as news, weather,
share prices, and other information beneficial for business
エリア(Area)
Provides district information such as weather or map
ショッピング&オークション(Shopping & Auctions)
Provides information about shopping malls where you can
purchase goods with your cellphone and the information
about the net auction where you can sell or buy easily
ライフ(Daily life)
Provides useful information for daily life
ホビー&カルチャー(Hobbies & Culture)
Provides the latest information about games, fortunetelling, music, e-books, and information about hobby and
entertainment trends
au style
Introduces au-recommended information and sites
とくする情報(Valuable Information)
Provides gifts and useful information exclusively for EZweb
service subscribers for free
#
EZサービスで探す(Search by useful EZ services)
Introduces useful, amusing and recommended services
special to EZweb
$
auお客さまサポート(au Customer Support)
Provides phone bills, procedures, au information, and au online manuals
%
&
(
EZweb
7
キーワード検索機能(Search by keyword)
Provides information search function by keywords
カテゴリで探す(Search by category)
Searches for a site by category
トップニュース(Top News)
Provides the automatically-updated latest top news
最新情報(Latest Information)
Introduces the list of new special features or contents
started at EZweb
カンタンアクセス・オープンサイト(Simple Access and Open Site)
Introduces Simple Access and Open Site
災害用伝言板(Disaster Message Board)
Registers/checks the safety information in disasters
ENGLISH
Introduces English sites
◎ The layout and contents of the EZweb screens are example. These are
subject to change.
◎ Some sites may charge you for the content in addition to call charges.
67
Bookmarking Sites You
Frequently Access
Bookmark
it!
Display favorite sites you
want to bookmark, and
press & (BrowserMenu).
Press 1 (New bookmark).
※ You may not be able to bookmark
some sites.
Press & (Reg).
Use j to select a folder,
and then press c (OK).
The message “Registered” appears
when completed.
You can have up to 100 sites bookmarked in the Favorite Sites.
68
’s go
et
e!
he r
L
Viewing Sites saved
to the Favorite Sites
While the standby screen
is displayed, press R.
EZweb
Use s to select “EZweb,”
and then press 2
(Favorite Site).
Use j to select a site or
folder, and then press
c (OK).
If you selected a folder, use j to
select a site, and then press c (OK).
69
Downloading Chaku-Uta®
To download a Chaku-Uta®, perform step 1
under “Displaying the EZ Top Menu” (page 67),
and then perform the following steps.
Use j to select “ カテゴリで
探す ” (Search by Category),
and then press c (OK).
Use j to select “ 着うた ”
(Chaku-Uta®), and then
press c (Select).
Select the content (desired information site), and download it.
In order to use fee-based contents, you need to enter your EZ password or
premium EZ password.
EZ Password:
This is the 4-digit number you specified when you first subscribed to the feebased contents.
Premium EZ Password:
This is the 4 to 8-digit number you registered for your first “ まとめて au 支払
い ” (combined au payment service) payment.
Input the required password according to the instructions that appear on the
display. The first time you use a site, register the password you want to use.
To download information, follow the instructions that appear on the display.
Downloaded data is stored in the Data Folder.
In addition to call charges, you will be charged according to the pricing policy
of each site to download Chaku-Uta® and other contents from a fee-based site.
◎ Perform the same procedure to download wallpaper and use it for the
standby screen background.
◎ When your initial subscription date or change date for additional EZweb
70
options is after September, 2006, the EZ password and the premium EZ
password will be any 4-digit number you entered on your subscription contract.
Downloading
Chaku-Uta-Full®
While the standby screen is
displayed, press R, use s
to select “au Music.”
Press 2 “Jump to EZ
Music!.”
EZweb
This operation connects the phone to
“EZ Music!.” For the operations after
connecting, follow the instructions
displayed on the screen.
You can also download Chaku-Uta-Full® by selecting “着うたフル” (ChakuUta-Full®) in step 2 under “Downloading Chaku-Uta®” (page 70).
71
Checking Charges
You can check call and transmission charges.
While the standby screen
is displayed, press
c11.
When the EZweb connection
confirmation screen appears, press
1 (Yes).
Use j to select the item
you want to check, and
then press c (Select).
72
EZ Channel-Plus
EZweb subscription required
EZ Channel-Plus provides the latest programs you registered to
download. Each updated content is automatically downloaded to your
W43CA.
■ Displaying EZ Channel-Plus Menu
Use s to select
„
“ EZ Channel-plus.
Press R.
Standby screen
EZweb memu
EZ ChannelPlus memu
■ Enjoying EZ Channel-Plus
① Register the programs you are interested in.
You can register up to 16 programs from “Jump to
Program Guide.” ※
© KDDI
② Playback the program.
You can watch the program saved in “My Channel”
whenever you want.
© KDDI
③ Save the program.
e
When a registered program is updated, the program is overwritten with new one.
You should save the programs you do not want to delete in “Multi Folder” etc.
※In some cases, you may not be able to save a program because of
copyright protection.
Sav
EZweb (EZ Channel-Plus)
Registered programs are downloaded
automatically since late at night to early morning,
and then saved in “My Channel.”
※The number of programs you can save may
vary according to Data Folder memory status.
◎ You need to perform an initialization procedure before you can use
EZ Channel Plus. If you have not performed initialization yet, refer to
“Initializing E-mail and EZweb” (page 22).
◎ With EZ Channel-Plus/EZ Channel service, you may get a large data by each
program (maximum of approximately 5MB). Only subscribers to Packet
Transmission Flat Rate Service can download programs using this service.
◎ When the scheduled delivery time comes, the programs are
automatically downloaded. Turn on the cellphone with its battery pack
full, and put it in the area with good reception.
◎ The display layout and contents are examples. These are subject to change.
73
EZ Navi Features
EZweb subscription required
EZ Navi uses global positioning system (GPS) information to
provide you with useful information.
You can use various sites such as “EZ Navi Walk” that navigates
you to your destination, “Position Search” that allows you to check
where your child is, and “Area Message” that lets you know when
your child is coming close to the destination.
Use s to
select “ EZnavi.”
PressR.
Standby screen
EZweb menu
EZ Navi menu
Checking your route: “EZ助手席ナビ” (Passenger seat Navi)
This service provides route information (by voice and map) to a person in passenger’s
seat.
When you check where your child is: “安心ナビ位置確認”
(Position Search)
This is a service that you can check the location of an au cellphone
supporting “Position Search” by operating W43CA. There are two kinds
of services: “いつでも位置確認” (Auto Position Search) (paid) and “位置
確認メール” (Position Search Mail) (free).
Receiving an e-mail alert whenever another phone enters or exits
a particular area during a specific time of day: “安心ナビエリア
通知” (Area Message)
Alert mail is sent to a particular au phone whenever another phone enters (or is inside of)
or exits (or is outside of) a preset area.
74
“EZnaviwalk”
A menu of useful options you can use while you are out.
The latest news and featured information
※ “おためしナビ”(Navi Demo) provides the demonstration
of voice navigation or Voice input function.
★
Searchable source of train transfer and timetable
乗換検索
(Transfer Search)
information
★
ナビ (Navigation) Voice navigation to a specific destination, and “ My Spot ”
registration
オススメ (New)
現在地
(Current Location)
道路情報
(Traffic Information)
設定登録
(Setups and Registrations)
Searchable source of maps, shops, and other information
about your current location
Searchable source of real-time nationwide traffic
information
Setups, membership registration, etc.
The star symbol shows that you can use your voice to enter search
terms. This is called “Voice input” function.
“Return to Home”
“My Spot”
Select “ルート
案内開始”
(Start Route
Guidance)c
→“はい” (OK)
c
Just register destinations you often visit,
your home location, and your favorite
destinations for quick and simple
navigation.
“View My Position”
“Mail My Position”
EZ Navi
Search result screen
Simply preset the your home location for
easy navigation back there from any
location.
Your initial location is
indicated by
.
Changes in your
location are indicated in
real time by
. Map screen
Simply select View My Position to display
your current location on a map in real
time.
You can e-mail a map of your current
location to another phone.
Navigation engine by NAVITIME JAPAN 地図:昭文社/住友電工
◎ In addition to packet transmission fee, you may be charged some other
fees for using EZ Navi.
◎ The display layout and contents are examples. These are subject to change.
75
Security Navi Features
EZweb subscription required
Position Search Features
When your child does not come home early and you are worried if your child may
be lost, you can check the current location of your child by a map with a simple
operation. There are two kinds of services of “Position Search”: “Auto Position
Search” and “Position Search Mail”.
1
“いつでも位置確認” (Auto Position Search)
Features
re is
Whe oy?
my b
Park
Example: When the mother sent a mail
to her child:
2
• You must register each other’s
information in both cellphones
beforehand. When mother searches
for child’s position, W43CA
automatically shows the child’s
current position without operations
from the child.
Notice: The monthly fee is charged separately.
“位置確認メール” (Position Search Mail)
Features
Co
ho ming
me
ou
Did y
ol ?
scho
finish
Example: When the mother sent a mail
to her child:
76
• By sending e-mail from mother to
child, she can confirm the child’s
position.
When child’s number is saved in
Address Book, mother can confirm
the child’s position easily without
membership registration.
Notice: When confirming, this service requires
child’s operations.
Area Message Features
This service lets you configure two au phones with specific areas and specific
times. Whenever a child carrying one of the phones approaches (or is inside of) the
specified area during the specified a time period, an e-mail alert is sent to the other
phone. Area Message can also be configured so an e-mail alert is sent when the
child leaves (or is outside of) a specified area.
“エリア通知” (Area Message)
Features
He’s arrived
at cram school.
Cram School
• When your child goes to Juku
(cram school) or culture lesson
and you are worried about of your
child’s way home, the child’s
cellphone automatically informs
the mother’s cellphone that the
child has passed the usual route.
Example: When the mother checks the
area her child is in:
◎ Security Navi services are available only among the cellphones
EZ Navi
supporting these feature.
◎Before you can use Security Navi, the phone numbers of the cell phones
must be recorded in the address books of both of the cell phones.
◎Before you can use Security Navi, you need to agree the terms of use that
appears the first time you start it up and you must register a password.
Agreement of the terms of use is required for both sides.
◎The wrong location may be displayed in areas where GPS reception is poor,
underground, inside of a building, or in areas surrounded by buildings.
◎Area Message may not be able to send alerts properly in cases where
correct location information cannot be obtained.
◎ When the other party is out of range, set to “reject,” no application,
operating, or using a cellphone not supporting this service, you cannot
check the location.
◎ The screen is an example, and may differ from the actual display.
◎Security Navi features cannot be used while C-mail is disabled or when EZ
apps Restrict is selected.
◎ Free calling time provided by your service plans can be applied to EZ
apps transmission charges. However, Family C-mail Service or Packet
Transmission Discount Service does not apply to EZ apps transmission
charges.
◎ The packet transmission fee is charged for obtaining information or
displaying map separately.
77
EZ FeliCa
EZweb subscription required
EZ FeliCa is a service available for the cellphones loading the
technology of contact-free IC cards called FeliCa. Simply by
holding W43CA over reader/writer (external device)※, you can use
W43CA for shopping by using e-money or use it as member’s
cards, point cards, and so on.
When you use EZ FeliCa, you need to download the applications
from the provider of the service you want to use.
“QUICPayTM” (クイックペイ) is prepared at the time of purchasing.
→ “Using FeliCa-supported EZ apps” (page 85).
※Devices on the electronic cash registers at stores, etc, that exchange data
between FeliCa chips
EZ FeliCa Features
Shopping
Member’s Card
au network
You can shop using the e-money or
credit card functions of your cellphone.
Available as member’s cards
or point cards.
W43CA
Transportation Ticket
With your W43CA, you only
need your cellphone for the
use of public transportation.
W43CA
flc-01
You can check the history
of use or the balance on the
display of the cellphone.
You can make online charge or
perform various procedures
anytime, anywhere.
■ Notes on Using EZ FeliCa
● Keep your W43CA safe. In case your cellphone is lost, please contact the service
company for details about EZ FeliCa-supported service.
● We recommend that you set FeliCa Lock or Remote Auto Lock in case of loss or theft.
● We accept no responsibility for loss or damage of your data caused by theft, loss
or malfunction of your W43CA.
● Your security codes and passwords needs to be highly confidential and protected.
● Contact the service company for further details about FeliCa-supported EZ apps.
● Even when your W43CA supports EZ FeliCa service itself, some services may be
unavailable. For details, contact your nearest au shop or the au Customer Service
Center.
● Some of the EZ FeliCa service are subscription dependant.
● For details about each service, contact the EZ FeliCa service provider.
● Contents provided by each service are subject to change without notice.
● Cellphones supporting each service are subject to change without notice.
78
Communicating
with Reader/Writer
You can use EZ FeliCa simply by holding the
FeliCa mark over reader/writer.
Hold the FeliCa mark of W43CA over reader/writer.
FeliCa
mark
EZ FeliCa
◎ You can use EZ FeliCa without starting FeliCa-supported EZ apps.
◎ EZ FeliCa is available even when the power is turned off. However, while
FeliCa Lock is active, or the battery level is very low, you may not be able
to use EZ FeliCa.
◎ FeliCa antenna is built-in Battery pack cover. To use EZ FeliCa function,
always attach Battery pack cover to W43CA.
◎ Be careful not to bump the FeliCa mark against reader/writer when
holding over.
79
Setting FeliCa Lock
You can restrict the use of EZ FeliCa by setting FeliCa Lock on. You can
temporarily release the FeliCa Lock and use EZ FeliCa for a certain
period of time by holding down r for about one second while the
standby screen is displayed and entering the lock No. (quick release).
While the standby screen
is displayed, press c4
141.
Press 1 (ON), enter the
lock No., and then press
c (OK).
The FeliCa Lock is set.
If the battery discharges while the FeliCa Lock is on, you will be unable to
release the FeliCa Lock. Be careful of the battery level. When your battery is
discharged, recharge the battery then release the FeliCa Lock to use EZ FeliCa.
◎ When FeliCa Lock is set,
appears on the standby screen.
◎ In case you lost W43CA, you can set the FeliCa Lock by
setting Remote Auto Lock. Remote Auto Lock requires
the initial setup beforehand.
◎ Even if you set Auto Lock, the FeliCa Lock will not be set.
■ Releasing FeliCa Lock temporarily (quick release)
When the FeliCa Lock is on, hold down r for about one second while the standby
screen is displayed, enter the lock No., and then press c (OK).
The vibrator works, “FeliCa Lock Quick releasing” is displayed and the FeliCa Lock
is temporarily released.
◎ If you press F or when “Quick Release” (about 5 minutes is set at the
time of purchasing) elapses, W43CA returns to FeliCa Lock status.
◎ You cannot start FeliCa-supported EZ apps while FeliCa Lock is
80
temporarily released.
Using FeliCa-supported EZ apps
“QUICPayTM” ( クイックペイ ) is prepared as FeliCa-supported EZ apps
in W43CA at the time of purchase.
■ Starting FeliCa-supported EZ apps
While the standby screen
is displayed, press c.
Use a to select “EZ FeliCa,”
and then press c (OK).
EZ FeliCa menu appears.
EZ FeliCa
menu
The list of the FeliCa-supported EZ
apps saved in W43CA is displayed.
Select the EZ apps you want to start.
EZ FeliCa
Press 1 ( アプリ一覧 )
(EZ apps List).
81
EZ•FM
EZweb subscription required
The W43CA allows you to listen to the FM radio.
Before using EZ•FM
■ Connecting Casio round-type earphone jack conversion
adaptor 01 and MDR-E0931 by SONY
Open W43CA flat type earphone terminal cover, connect a Casio round-type
earphone jack conversion adaptor 01 and MDR-E0931 by SONY.
W43
CA
Casio round-type
earphone jack
conversion adaptor 01
MDR-E0931 by SONY
■ To listen to the EZ•FM clearly
In places like an indoor room where reception condition is not good, you may not be
able to listen to the EZ•FM. In such case, try the measures below.
● The cable of Casio round-type earphone jack conversion adaptor 01 and MDRE0931 by SONY works as an antenna. Connect Casio round-type earphone jack
conversion adaptor 01 and MDR-E0931 by SONY to W43CA, extend the cable
as long as possible, and try to find the best direction for listening to the EZ•FM.
● Radio wave comes from outside, so try to listen to the EZ•FM as close as
possible by the window.
82
Listening to the EZ•FM
While the standby screen
is displayed, press c,
use a to select “EZ•FM,”
and then press c (OK).
The precautions appear. Read the
precautions, and then select
“ 承諾する ” (Accept). If you select “ 承
諾(次回から非表示)” (Not display
hereafter), they will not appear after the
next time.
Frequency
area
Radio station/
Song title area
EZ • FM screen
Press C.
You can switch between Frequency
area and Radio station/Song title area.
EZ • FM
◎When you use EZ•FM for the first time, area selection screen appears.
Select an area where you use the EZ•FM.
◎No packet transmission fees are charged for listening EZ•FM. However,
you will be charged for using Display the song title service provided by
EZ•FM apps.
◎The specification is subject to change without notice.
Continued on the next page
83
■ Adjusting the volume
Press j on the EZ•FM screen to adjust the
volume.
u : Increases volume.
d : Decreases volume.
※ There are 20 levels for the volume.
■ Tuning the radio frequency
Press C on the EZ•FM screen, and then
select the frequency area.
s : Tuning (by 0.1MHz)
s (hold down for about one second): Automatic tuning
When you select the song title area, using s key allows you to
select the radio station.
■ Displaying the song title
You can obtain the information such as the name of the tune, the
artist and the broadcasting station of the currently air-played tune.
Press c ( 曲名表示 )(Display the Song
Title) on the EZ•FM screen.
The name of the tune, the artist, etc, will be scroll-displayed. This
information may not be displayed depending on the program.
■ Switching the speakers
Press &44 on the EZ•FM screen,
and then press 1 ( スピーカー/イヤホン
切替 ) (Speaker/Earphone).
You can set to “イヤホン” (Earphone) or “スピーカー” (Speaker).
■ Suspending/Stopping the EZ•FM
Suspends/stops the EZ•FM apps. Even after suspending the EZ•FM apps, you can
listen to the EZ•FM as a BGM.
Press F on the EZ•FM screen, and then
press 1 (Suspend) or 2 (Stop).
Suspend : Suspends the EZ•FM apps. However, you can
continue listening to the EZ•FM.
Stop
: Stops the EZ•FM.
84
PC Site Viewer Features
EZweb subscription required
To use the PC site viewer, an EZ WIN course subscription is required.
If you did not subscribe when you purchased your cellphone, contact
your nearest au shop or the au Customer Service Center.
Using the PC site viewer, you can comfortably view the WEB sites
just like those you usually view with your PC, by high speed
packet transmission of 2.4 Mbps down at maximum.
1
You can view WEB sites for PC with W43CA
A WEB site for PC
The content displayed is an example, and it
may differ from the contents that actually
appear on the display of your phone.
2
Viewing a site with PC site viewer
If you set the “表示モー
ド” (Display Mode) to
“スモールスクリーン”
(Small Screen), a WEB
site is displayed
adjusted to the size of
W43CA screen, and you
can view the site with
simple j operations.
If you set the “表示
モード” (Display
Mode) to “PCスクリー
ン” (PC Screen), the
portion of the page
laid out by PC screen
is displayed, and you
can view the site with
a operations.
You can display/automatically-update a portion of
WEB site information. “Using Standby Assignment” (page 87)
Registering to “待受指定” (Standby Assignment)
Displaying as “Standby screen”
PC Site Viewer
Select a portion of a WEB site page
beforehand, and then register it to
“ 待受指定 ” (Standby Assignment).
Display a portion of a WEB site page, and
you can automatically-update it at specified
intervals.
If you press & (接続) (Connect) while “待受指定” (Standby Assignment) is displayed, you can display from
the top of the page with a full-screen and operate the PC site viewer in the same way as the usual browsing.
85
PC Site Viewer
Mastering Operation Basics
While the standby screen
is displayed, press c.
Use a to select “PC site
viewer,” press c (OK),
and then press & (OK).
Warning message on packet
transmission appears.
Press 1 (トップページ)
(Top Page).
The initial setting is “Duogate”
(http://duogate.jp/).
※ The contents displayed on the right is
an example, and it may differ from the
contents that actually appear on the
display of your phone.
Press s.
The display scrolls.
Use j to select the links on the screen.
If you select a link and press c ( 選択 ) (Select), the linked page appears.
In step 2 of the above procedure, search tool appears.
You can enter keywords in search window, and select
“検索” (Search) to find the desired page.
86
Using Standby Assignment
It’s
updated.
You can set a portion of a WEB site as the standby
screen. You can set it to be automatically-updated
at specified intervals.
When a specified time elapses on the standby
screen, the WEB site selected by “ 待受指定 ”
(Standby Assignment) is displayed.
To use “ 待受指定 ” (Standby Assignment), perform steps 1 through 4
under “Mastering Operation Basics” (page 86), and then perform the
following steps.
Display your favorite page,
and then press & (メニュー)
(Menu).
Press 5 (待受指定)
(Standby Assignment).
Press & (オプション)
(Option), and then press
1 (新規作成) (Create New).
PC Site Viewer
Press c (OK) twice.
If you press a, you can shrink the area
displayed by “ 待受指定 ” (Standby
Assignment).
If you press & (拡大) (Widen) and press
a, you can enlarge the display area.
※ If you press & (縮小) (Narrow) again,
you can shrink the display area.
Continued on the next page
87
Press c (編集) (Edit),
enter the title, and then
press c (OK).
Press & (登録) (Register),
and then press & (設定)
(Setting).
Use j to select the
interval to update the
standby screen.
If you select the interval to automatically-update the page displayed as the
standby screen from among “ 24時間/12時間/8時間/4時間/2時間/1時間/30分/
更新しない ” (24 hours/12 hours/8 hours/4 hours/2 hours/1 hour/30 minutes/no
update), and press c (OK), then “ 待受指定警告表示 ” (Standby Assignment
Warning Display) appears.
Press & (OK), and then press c (OK) to complete the setting.
◎ Precautions for using packet transmission for PC site viewer
We recommend that you subscribe to Packet Transmission Discount
Service as the transmission fee may be quite high by performing a
large-size communication such as viewing homepages that include large
images.
Also, be careful that packet transmission fee will be charged for each
updating if you set automatic-update by “待受指定” (Standby Assignment).
◎ Checking your packet transmission fee
You can use Charge Reference Service (This service estimates this
month’s packet transmission fee with no discount. It shows the rough
number that was billed 1 or 2 days ago.).
PC ⇒ http://my.kddi.com/(MyKDDI)
※ Subscription is required before you can start using this service.
au phone ⇒ R → “Top Menu” → “auお客さまサポート” (au Customer
Support)
88
Smart Mode
Be
e p !!
Smart Mode lets you limit operations to the
telephone function, address book, camera,
e-mail, C-mail, EZweb, and other frequently
used functions, which simplifies operations.
Entering Smart Mode
While the standby screen is
displayed, press c, use
a to select “Settings,” and
then press c (OK).
Press 5 (User Support),
3 (OperationSupport),
and then 3 (Mode Setup).
Press 2 (Smart Mode).
Smart Mode
◎ The lock No. is required when changing from Teens Mode to Smart Mode.
◎ When you enter Smart Mode, settings configured in Usual Mode are
automatically changed to those configured in Smart Mode.
89
Exiting Smart Mode
While the standby screen
is displayed, press c.
Use j to select
“SETTINGS,” and then
press c (Select).
Press 0
(SmartModeOFF).
Press 1 (Yes).
This returns to Usual Mode.
90
Using the Smart Mode
Main Menu
Smart Mode has its own main menu.
You can switch between the two available Smart Mode main menu styles
by pressing & (Switch).
&(Switch)
&(Switch)
Menu
Description
CALL
For using the address book, outgoing records and incoming records, and
for registering data in the address book
MAIL
For composing and reading E-mail and C-mail messages, and for changing
E-mail addresses
CAMERA
For selecting the photo or movie recording, and the correction method
NEWS
For checking the latest news information
MUSIC/RADIO
For using au Music Player and EZ·FM
DATA FOLDER
For viewing and deleting data in the Data Folder or microSDTM memory card
TOOLS
For using the calendar, calculator, and other tools
SETTINGS
For changing the incoming tone, wallpaper, and character size, for
turning Manner Mode on and off, and for turning Smart Mode off
MY NUMBER
For displaying your current phone number and e-mail address
Smart Mode
91
Adding Data to the
Address Book in
Smart Mode
While the standby screen
is displayed, press &,
press 2 (Register), and
then press c (Fix).
Enter the name, and then
press c (OK).
To input text
→ “Inputting Characters” (page 34)
Check the reading of the
name you inputted, press
c (OK), and then press
3 (Input by Myself).
You can also select data in incoming
records or outgoing records.
To go without saving the telephone
number, press 4 (Not Input) and
perform step 5.
Enter the phone number,
and then press c (OK).
When entering the number of a
standard phone, be sure to start with
the area code.
92
Tom
Press 3 (Input by Myself).
You can also select data in sending
records or receiving records.
To go without saving e-mail address,
press 4 (Not Input) and perform
step 7.
Enter the e-mail address,
and then press c (OK).
To input an e-mail address
→ “Inputting an E-mail Address”
(page 35)
Press 2 (Not Register).
The confirmation screen appears.
Press c (OK).
Press c (Reg).
“E-Mail Add1,” and “Image” data into an address book record.
◎ You can press 1 (Register) in step 7 to select a photo in the Data
Smart Mode
◎ In Smart Mode, you can only input “Name,” “Reading,” “Phone Number1,”
Folder and assign it to the address book record.
◎ Pressing & (Reedit) in step 8, and then pressing 1 (Change) returns
to step 2 from which you can edit the contents of the record.
93
Using the Address
Book in Smart Mode
Example: To view a record in address book
While the standby screen is
displayed, press & , and
then press 1 (Look).
Use a to select the address
book record you want to view,
and then press c (Select).
Press 4 (Read Data).
The address book record appears.
Use j to select the phone number,
and press c (Call). You can make a
phone call or start Hello Messenger.
Use j to select the e-mail address,
and press c (E-Mail). You can create
an e-mail message.
94
1(Call): Dials the number of the selected record.
2(Send Mail): Selects to compose an e-mail message and send it to the
address of the selected record.
To create an e-mail message
→ Perform the procedure starting from step 3 under “Creating and Sending
E-mail Messages in Smart Mode” (page 95).
3(Hello Messenger): Invites the selected member to the meeting.
5(Delete Data): Deletes the selected address book record.
6(Edit Data): Selects to edit the selected address book record.
7(Send via Ir): Sends the selected address book record via infrared.
Creating and Sending
E-mail Messages in
Smart Mode
Bee
p
p
Bee
Beep
While the standby screen
is displayed, press L,
1 (E-Mail), and then
1 (Create Mail).
Press 1 (Address Book),
use a to select an
addressee, and then press
c (Select) twice.
You can select an addresses from
sending/receiving records, or you can
manually enter an address.
When you have already registered two or more e-mail addresses in
the address book (in Usual Mode/Teens Mode), Setting to Smart
Mode displays only the e-mail address you usually use.
Press c (Fix), enter the
subject, and then press
c (OK).
To input text
→ “Inputting Characters” (page 34)
Smart Mode
Press c (Fix).
Continued on the next page
95
Enter the body text, and
then press c (OK).
To input text
→ “Inputting Characters” (page 34)
Press 3 (Not Attach).
The confirmation screen appears.
Press c (OK).
1 (Data Folder):
You can select a photo saved in the
Data Folder and attach it to the email message.
2(microSD):
You can select a photo saved in the microSDTM memory card and attach it
to the e-mail message.
In Smart Mode, an e-mail message can have only one attachment.
After checking the content of
the e-mail, press c (Send).
The message “E-Mail is sent.” appears
on the display after the e-mail message
is sent.
Pressing & (Reedit) instead of c (Send) in step 7 returns to step 2, from
which you can edit the contents of the e-mail message.
96
Shooting a Photo in
Smart Mode
Clic
k!
While the standby screen is
displayed, press c, use
j to select “CAMERA,”
and then press c (Select).
Press 1 (Photo), and
then press 1 (Photo1).
Photo 1
Photo 2
Photo 3
Wallpaper 240×320
WideWallpaper 240× 400
VGA 640×480
Point the lens at the
subject, and then press
c (Shutter).
The phone will emit a shutter sound.
You can also press b in place of c.
Press & (Save).
Smart Mode
Pressing c (Menu) in step 4, and then pressing 2 (Send Mail) will
display a screen for composing an e-mail message with attached photo.
To create an e-mail message
→ Perform the procedure starting from step 2 under “Creating and Sending
E-mail Messages in Smart Mode” (page 95).
97
Viewing Photos in
Smart Mode
While the standby screen is
displayed, press c, use j
to select “DATA FOLDER,”
and then press c (Select).
Press 1 (Data Folder).
Use j to select “Photo
Folder,” and then press
c (Select).
Selecting “All Data” displays a list of all
photos in the Photo Folder.
Use j to select the dated
(by shooting date) folder,
and then press c (Select).
A list of all photos that were shot on
that day are displayed.
98
Use a to select the photo
you want to view, and then
press c (Menu).
Press 1 (Play).
The photo appears.
2 (Delete): Deletes data.
3(Attach E-Mail):
Displays a screen for composing an e-mail message
with an attachment.
To create an e-mail message
→ Perform the procedure starting from step 2 under “Creating and
Sending E-mail Messages in Smart Mode” (page 95).
4(MoveTo microSD): Moves the data to microSDTM memory card.
5 (Send via Ir): Sends your data via infrared.
Smart Mode
99
Teens Mode
Teens Mode can be used to block spam, and
to block inadvertent access to phone
numbers and URLs included inside mail
messages. Teens Mode can also be used to
restrict call time and the number of sending
mail.
Using Teens Mode
■ Teens Mode can be used to restrict mail reception and
display contents.
When the sender is
a Pair partner
Receipt is allowed.
When the sender is
included in the
address book
Receipt is allowed. However, the phone numbers, e-mail
addresses or URLs contained in the body of the mail message can
not be used.
When the sender is
not either of the above
E-mail: Only the sender’s name and subject are received.
Body text and attached data are not received.
C-mail: Not received.
■ Turning on “Teens Restrict” and Teens Mode makes it
possible to restrict call time and the number of sending mail.
● Making a Call
To someone who is
a Pair partner
No restriction
To someone who is
not a Pair partner
Call time is restricted. Further calling is not possible if the call time
exceeds the “Teens Restrict” setting.
● Sending a Mail
100
To someone who is
a Pair partner
No restriction
To someone who is
not a Pair partner
The number of sendings is restricted. Further mailing is not possible if
the number of sendings exceeds the “Teens Restrict” setting.
Turning on Teens Mode
While the standby screen is
displayed, press c, use
a to select “Settings,” and
then press c (OK).
Press 5 (User Support), and
then 3 (OperationSupport).
Press 3 (Mode Setup),
and then 3 (Teens
Mode).
Press 1 (Switch
TeensMode), and enter the
lock No., and press
c (OK).
Teens Mode
The lock No. is required when changing from Teens Mode to Usual Mode
or Smart Mode.
101
Other Functions
Security Setup Features
With Security Setup, you can make a phone call to preregistered
numbers or use high-volume buzzer just holding down 0 for about
one second.
Safety Buzzer
You can use W43CA as high-volume emergency
buzzer by holding down 0 for about one
second while the standby screen is displayed.
■ To turn on Safety Buzzer
While the standby screen is displayed, press c5351,
input the lock No., and then press c (OK).
■ To stop Safety Buzzer
To stop Safety Buzzer, input the lock No., and then press
c (OK).
※You cannot turn off W43CA or perform any other operation while the
Safety Buzzer is sounding. The Safety Buzzer will continue to sound until
you input the lock No. or the battery fully discharges.
Hot Dial
With Hot Dial, holding down 0 for about one second will dial a
preset phone number.
■ To turn on Hot Dial
While the standby screen is displayed, press
c5352, input the lock No., and then press c (OK).
Next, input the phone number you want to preset, and then press
c (Reg).
102
While connected with Casio round-type earphone jack conversion adaptor
01 and MDR-E0931 by SONY/Casio flat-type stereo earphones 03 (option)/
flat-type stereo earphone-microphone (option), Safety Buzzer sounds
through W43CA speaker.
Extension Mode
Using the extension mode, W43CA automatically shuts down the radio
wave after issuing the Low Battery Alert. This is quite a useful function
that you can still check Outgoing/Incoming Records, Content of e-mail,
Address Book, Schedule and so on when necessary. In this case, you
can only use the functions which needs no radio wave.
■ To turn on Extension Mode
While the standby screen is displayed,
press c5341.
Display example when you switch to Extension Mode
Other Functions
103
In addition to the functions covered in this Basic Manual, your W43CA
also has the following features.
Global Expert
EZ apps (BREW®)
W43CA supports Global Expert based
on au IC card.
Global Expert is an international
roaming service for the customers to
use the phone replacing its au IC card
with GSM cellphone for overseas use.
No special application procedure or
daily/monthly fee are needed, and the
call charge is added up to domestic
call, so the pay procedure is simple.
Enjoy downloaded games and other
softwares.
au Music
You can use au Music Player to enjoy
a Chaku-Uta Full® or your favorite CD
tracks. Also, you can download a
Chaku-Uta Full® or purchase CD
tracks by accessing “EZ Music!.”
Barcode Reader & Maker
You can use the camera to read QR
codes and barcodes. Also, you can
create your own barcodes directly
from your address book entries.
au My Page
You can upload and backup various
data in your W43CA (in Address
Book, E-mail, Data Folder) to au My
Page on server to manage/check
them.
Infrared communication
You can exchange the data saved in
your address book, Schedule, or Data
Folder between au cellphones
supporting infrared communication.
104
Macro Mode
(Photo and Movie)
Pressing * allows you to take
close-up photos of food, flowers, and
other subjects (closest focusing
distance: 10 cm).
Serial Shot
(Photo)
You can shoot up to nine consecutive
images and store all of them or only
selected images in memory.
Post Recording/ Telop
(Movie)
After recording a movie, you can add
audio or text. You can select 24 colors
or 169 colors for text or background.
Mail Recipe
(E-mail)
Simply follow the steps provided for
quick and easy composing of Basic
Mail without attachments, Photo Mail,
Doodle Mail, Movie Mail, and Exciting
Mail.
EZ News Flash
You can check latest news report on
your standby screen. With this total
new “information delivery service,” you
can select news flash telop or news
flash window to browse various news
information.
Troubleshooting
Symptom
The phone
does not
turn on.
I can’t make
calls.
I can’t
receive calls.
What to check
What to do
Page
Is the battery pack
installed correctly ?
Correctly install the battery pack.
Is the battery pack
charged ?
Charge the battery pack.
P.12
Are you holding down
F for at least 2.5
seconds ?
Hold down F for at least 2.5
seconds to turn on the phone.
P.14
Is
(Out of Range) on
the display ?
Wait until you are in a location
is not displayed before
where
trying to make a call.
P.14
Are you including the
area code?
When making a call to a standard
phone, you need to input the area
code, and then the phone number.
P.26
Is the phone turned on?
Hold down F for at least 2.5
seconds to turn on the phone.
P.14
Did you press N ?
After inputting the phone number,
press N to dial it.
P.26
Is Emission OFF Mode
turned on?
Turn off Emission OFF Mode.
Is
(Out of Range) on
the display?
Is the phone turned on?
Move to a location where
is not
on the display.
Hold down F for at least 2.5
seconds to turn on the phone.
−
−
P.14
P.14
Is Emission OFF Mode
turned on?
Turn off Emission OFF Mode.
Nothing
happens when I
press the keys.
Is the phone turned on?
Hold down F for at least 2.5
seconds to turn on the phone.
P.14
The phone
emits a warning
tone, and then
turns off.
Is battery pack power
low?
Charge the battery pack.
P.12
The phone
answers
calls
automatically.
Is Easy Voice Memo
turned on?
Hold down C for about one
second to turn off Easy Voice Memo.
P.32
Is Drive Mode turned
on?
Hold down ( for about one
second to turn off Drive Mode.
P.4
I can’t hear
the caller.
Is the earpiece volume
level too low?
During a call, press u to increase
earpiece volume.
P.31
Is the earpiece covered
with your ear?
Make sure to place the earpiece to
the center of your ear.
−
−
Troubleshooting
105
If you lose your W43CA
Turning on Remote Auto Lock makes it possible
for you to set Auto Lock and FeliCa Lock on from
a remote location. These lock function keeps
others from using your W43CA.
Auto
Lock
OK!
■ Configuring Remote Auto Lock Settings
You can set Auto Lock and FeliCa Lock on by making calls several times from the
registered phone number to your W43CA within the specified period of time.
While the standby screen
is displayed, press
c413, input the
lock No., and then press
c (OK).
Press 6 (Caller ID List).
Use j to select a
registration number,
press % (Edit), input the
phone number, and then
press c (Reg).
Press C twice and advance to the next
step.
You can also press & (Menu) before inputting a phone number, and select the
number from the address book, outgoing records, or incoming records, or you
can specify a pay phone.
You can register up to three different phone numbers.
106
Press 1 (ON/OFF Setup),
and then press 1 (ON).
Press 2 (Specified
Time), input the period
you want to specify, and
then press c (OK).
You can set the time period (the time
intervals from the first call to the last call
you should make to activate Remote Auto
Lock).
You can set the time period between 1 to 10 minutes.
Press 3 (Num of
Incoming), input the number
of calls you want to specify,
and then press c (OK).
You can set how many times you
should repeat making a call to activate
Remote Auto Lock.
You can set it from 3 to 10 calls.
■ Setting Auto Lock and FeliCa Lock on
After repeating a call (3 to 10 calls you have specified), Remote Auto Lock
turns active, and you hear an announcement letting you know Auto Lock and
FeliCa Lock has been set.
After Remote Auto Lock turns active, your W43CA is automatically turned off,
and turned on again.
Remote Auto Lock
Make a call to your W43CA from the registered phone
number within the period of time which has been specified in
“Configuring Remote Auto Lock Settings” (page 106).
◎ Remote Auto Lock cannot be activated while your W43CA is turned off
or outside of the service area.
◎ When you purchase the W43CA, its initial value in “Erase Data” setting is
“Not Erase,” and its initial value in “Rel Phone Lock” setting is “Valid.”
107
Index
A
Address Book ...................................
Adding outgoing or incoming record
data to the address book .............
Dialing from the address book ........
Editing .............................................
Registering an address book ..........
Adjusting the earpiece volume
during a call ...................................
Adjusting the ring tone volume .......
38
41
42
40
38
31
30
B
Battery level ...................................... 14
Battery pack ................................. 10, 11
C
Camera .............................................. 59
Recording a movie .......................... 62
Shooting a photo ............................. 61
Viewing photos and movies ............ 64
Casio round-type earphone jack
conversion adaptor 01 and
MDR-E0931 by SONY ................ 10, 82
Chaku-Uta®
Downloading ................................... 70
Chaku-Uta-Full®
Downloading ................................... 71
Changing the ring tone .................... 28
Charging the battery pack ............... 12
Checking charges ............................. 72
C-mail ................................................. 46
C-mail safe block function ............... 46
Create New ..................................... 53
Creating and sending C-mail messages ... 53
Reading received C-mail messages ... 54
D
Desktop holder ............................ 10, 12
Disaster Message Board Service ...... 6
Display indicators ............................. 19
Display language .............................. 16
Domain name .................................... 24
Drive Mode .......................................... 4
E
Index
108
Earpiece volume ...............................
Easy Voice Memo
Delete ..............................................
Playback ..........................................
Turning on .......................................
E-mail .................................................
31
Create New ..................................... 47
Creating and sending e-mail messages ... 47
E-mail address .................... 22, 23, 24
E-Mail Setup ................................... 52
Initial settings .................................. 22
Reading an e-mail message with
an attached photo or movie ......... 50
Reading received e-mail messages ... 49
Replying to a received e-mail message ... 51
Subject ............................................ 48
To .................................................... 47
Extension Mode .............................. 103
EZ Channel-Plus ............................... 73
EZ FeliCa ........................................... 78
Communicating with reader/writer ..... 79
FeliCa mark ..................................... 79
Setting FeliCa Lock ......................... 80
EZ•FM ................................................. 82
Listening to the EZ•FM .................... 83
Suspending/stopping the EZ•FM ..... 83
EZ Navi ............................................... 74
EZweb ................................................ 66
Bookmarking sites ........................... 68
Downloading .............................. 70, 71
EZ Password ................................... 70
EZ Top Menu ................................... 67
Viewing Sites saved to the Favorite
Sites ............................................ 69
H
Hello Messenger ............................... 55
Invite the members to the meeting ... 57
When you get an invitation
message to join ........................... 58
I
Included items ...................................
Incoming records ..............................
Initial settings
E-mail and EZweb ...........................
Initial values ......................................
Inputting characters .........................
Inputting an e-mail address .............
Inputting pictographs .......................
Inputting useful sentences ..............
10
27
22
14
34
35
36
36
K
Key functions .................................... 18
33
33
32
45
M
Mail
C-mail .............................................. 46
E-mail .............................................. 45
Mail filter ......................................... 5, 52
Main menu .................................... 20, 91
Manner Mode
Turning on ....................................... 31
Vibrator ............................................ 31
microSDTM memory card ............. 11, 19
Mind your manners! ........................... 1
Movie
Movie Folder ................................... 64
Recording a movie .......................... 62
Rerecording a movie ....................... 63
Sending a movie by e-mail .............. 65
Viewing movies ............................... 64
N
Names of parts .................................. 11
Notify caller ID .................................. 26
O
One-ring calls ................................. 5, 27
Operation basics .............................. 18
Other functions ............................... 102
Outgoing records .............................. 27
Own e-mail address
Changing ......................................... 24
Viewing ............................................ 23
P
Pair Function .....................................
Making a phone call, sending mail,
invite a pair partner to a Hello
Messenger meeting .....................
Registering a Pair partner ...............
PC Site Viewer ...................................
Mastering Operation Basics ............
Using Standby Assignment .............
Personal Security Code and
passwords .....................................
Phone Call .........................................
Answering a call ..............................
Dialing a person who called you
(incoming records) .......................
Making a call ...................................
Missed call notification ....................
Redialing a person you called
(outgoing records) .......................
Photo
Photo Folder ....................................
Reshooting a photo .........................
Sending a photo by e-mail ..............
Shooting a photo .............................
Viewing photos ................................
Playback
Easy Voice Memo ............................
Movie ...............................................
Photo ...............................................
43
44
43
85
86
87
15
26
26
R
Ready ................................................. 10
Redial
From incoming records ................... 27
From outgoing records .................... 27
Remote Auto Lock .......................... 106
S
Security Navi ..................................... 76
Security Setup ................................ 102
Safety Buzzer ................................ 102
Hot Dial ......................................... 102
Signal strength ................................. 14
Site .......................................... 67, 68, 69
Smart Mode ....................................... 89
Adding data to the address book .... 92
Creating and sending e-mail
messages .................................... 95
Entering Smart Mode ...................... 89
Exiting Smart Mode ......................... 90
Shooting a photo ............................. 97
Using the address book .................. 94
Using the Main Menu ...................... 91
Viewing shot photos ........................ 98
Soft keys ............................................ 21
Spam ............................................... 5, 52
Standby screen ................................. 14
T
Teens Mode ..................................... 100
Troubleshooting .............................. 105
Turning on power .............................. 14
Turning off power ............................ 14
U
Unsolicited advertisements .......... 5, 52
Using Menus ..................................... 21
V
Viewing your phone number ........... 23
27
26
26
27
64
63
65
61
64
33
64
64
For inquiries, call:
au Customer Service Center (General Information)
From EZweb site:
How to access
5 5 7 5 6
or
EZ → Top Menu →お客さまサポート (au Customer
Support) →お問い合わせ (Inquiries)
※Menu structure is subject to change without notice.
From regular phones:
フリーコール
0077-7-111
(toll free)
From au cellphones:
157area code not required
(toll free)
Pressing "zero" will connect you to an operator,
after calling "157" on your au cellphone.
古紙パルプ配合率100%再生紙を使用
Cellphone and PHS operators collect and
recycle unused telephones, batteries and
battery chargers at stores bearing the
logo regardless of brand and
manufacturer to protect the environment
and reuse valuable resources.
Sales: KDDI Corporation
Okinawa Cellular Telephone Company
CASIO COMPUTER CO., LTD.
MN7300YAA-1
August 2006, 1st Edition
Read this to access to the
au online manual