ES
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
PX120ES1A
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate
the apparatus in a way that secures easy access to the power cord.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the userís authority to operate the
equipment.
Important!
Please note the following important information before using this product.
• Before using the AD-12 Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for
breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-12 adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
CASIO Europe GmbH
Bornbarch 10, 22848 Norderstedt, Germany
PX120_e.book
1 ページ
2007年6月26日 火曜日 午前11時36分
Contents
General Guide ................................... E-2
Installing the Music Stand........................................... E-2
Configuring Settings with the
Keyboard ......................................... E-24
TONE/SETTING Button.............................................. E-3
To configure settings with the keyboard.................... E-24
Saving Settings and Using Operation Lock ................ E-3
Keyboard Keys Used for Configuring Settings.......... E-25
Power Outlet...................................... E-4
Using an AC Adaptor .................................................. E-4
Connections ...................................... E-5
Connecting Headphones ............................................ E-5
Connecting Audio Equipment or an Amplifier ............. E-5
Connecting a Pedal .................................................... E-6
Bundled and Optional Accessories............................. E-6
Playing with Different Tones ........... E-7
Selecting and Playing a Tone ..................................... E-7
Adjusting the Brilliance of a Tone ............................... E-9
Layering Two Tones ................................................... E-9
Using Effects............................................................. E-10
Using the Metronome ............................................... E-10
Playing a Piano Duet ................................................ E-11
Playing Back Built-in Songs .......... E-13
Parameter List........................................................... E-26
Tone selection ....................................................... E-26
Brilliance (BRILLIANCE)........................................ E-26
Reverb (REVERB) ................................................. E-26
Chorus (CHORUS) ................................................ E-26
Song/Rhythm Select (SONG/RHYTHM SELECT)..... E-26
Tempo (TEMPO) ................................................... E-26
Metronome Beat (METRONOME BEAT)............... E-26
Song, Auto Accompaniment volume...................... E-26
Metronome Volume ............................................... E-26
Auto Accompaniment mode (MODE) .................... E-26
Touch Response (TOUCH RESPONSE) .............. E-27
Keyboard Key (TRANSPOSE)............................... E-27
Keyboard tuning (TUNING) ................................... E-27
Send Channel ........................................................ E-28
Local Control.......................................................... E-28
Operation Tone...................................................... E-28
Back Up ................................................................. E-28
Operation Lock ...................................................... E-28
Connecting to the MIDI Terminal .............................. E-29
Playing Back All of the Built-in Songs....................... E-13
Playing Back a Specific Music Library Song............. E-13
Reference......................................... E-30
Practicing with a Music Library Song........................ E-14
Troubleshooting ........................................................ E-30
Playing a Rhythm............................ E-15
Product Specifications............................................... E-31
Operating Precautions .............................................. E-32
Selecting a Rhythm................................................... E-15
Using Auto Accompaniment ..................................... E-16
Appendix............................................ A-1
Tone List ..................................................................... A-1
Recording and Play Back............... E-20
Rhythm List ................................................................. A-1
Tracks ....................................................................... E-20
Song List ..................................................................... A-1
Recording Your Keyboard Play ................................ E-21
Fingered Chord Chart ................................................. A-2
Playing Back from Digital Piano Memory.................. E-22
Deleting Recorded Data ........................................... E-23
MIDI Implementation Chart
Company and product names used in this
manual may be registered trademarks of others.
E-1
PX120_e.book
2 ページ
2007年6月26日 火曜日 午前11時36分
General Guide
1
2
∗1
3
4
∗2
5
6
7
8
9
bk
∗4
∗3
*1
Bottom
bl
*2
Back
bm
bn
bo
*4
Installing the Music Stand
Insert the bottom of the music stand into the groove on
the top of the digital piano’s console.
E-2
*3
Left Side
bp
bq
PX120_e.book
3 ページ
2007年6月26日 火曜日 午前11時36分
General Guide
NOTE
• The names shown here are always indicated in bold when they appear within the text of this manual.
1 VOLUME controller
9 GRAND PIANO (CLASSIC) button
2 SYNCHRO/FILL-IN button
bk TONE/SETTING button
3 X/„ button
bl Pedal connector
4 MUSIC LIBRARY, RHYTHM button
bm DC 12V terminal
5 LR button
bn DAMPER PEDAL jack
6 RECORDER button
bo MIDI OUT/IN terminals
7 METRONOME button
bp POWER button
8 GRAND PIANO (MODERN) button
bq PHONES jack
TONE/SETTING Button
The TONE/SETTING button is used when configuring a variety of different digital piano settings. The following
are TONE/SETTING button basics.
z To change a setting, hold down the TONE/SETTING button
as you press the keyboard key that is assigned the setting
you want to select.
An operation confirmation tone will sound whenever you
press a keyboard key to configure a setting.
Example: “Selecting a Tone Using the Keyboard Keys” on
page E-8.
z For details about operations and settings, see “Configuring Settings with the Keyboard” on page E-24.
Saving Settings and Using Operation Lock
Your digital piano lets you save its current settings, and lock its buttons to protect against operation errors. For
details, see “Parameter List” on page E-26.
E-3
PX120_e.book
4 ページ
2007年6月26日 火曜日 午前11時36分
Power Outlet
Your digital piano runs on standard household power.
Be sure to turn off power whenever you are not using
the digital piano.
Using an AC Adaptor
Use only the AC adaptor that is specified for use with
this digital piano.
Specified AC Adaptor: AD-12
Back
DC 12V terminal
AC adaptor AD-12
Household power
Note the following important precautions to avoid
damage to the power cord.
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
• The power cord should not be stretched tight while
it is in use.
During Movement
• Before moving the digital piano, be sure to unplug
the AC adaptor from the power outlet.
During Storage
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
IMPORTANT!
• Make sure the digital piano is turned off before plugging
in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after very
long use. This is normal and does not indicate
malfunction.
E-4
PX120_e.book
5 ページ
2007年6月26日 火曜日 午前11時36分
Connections
IMPORTANT!
• Whenever connecting something to the digital piano, first
use the VOLUME controller to set the volume to a low
level. After connecting, you can adjust the volume to the
level you want.
Connecting Headphones
Connecting Audio Equipment
or an Amplifier
You can connect audio equipment or a music amplifier
to the digital piano and then play through external
speakers for more powerful volume and better sound
quality.
Pin plug
Left Side
Commercially available
headphones
PHONES jack
Audio amplifier AUX IN jack, etc.
RIGHT
(Red)
LEFT
(White)
Stereo mini plug
To digital
piano’s
PHONES
jack
Pin jack
Pin plug
(red)
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2
Mini plug
Connect commercially available headphones to the
PHONES jack. Connecting headphones to the
PHONES jack cuts off output to the speakers, which
means you can practice even late at night without
bothering others. To protect your hearing, make sure
that you do not set the volume level too high when
using headphones.
NOTE
• Be sure to push the headphones plug into the PHONES
jack as far as it will go. If you don’t, you may hear sound
from only one side of the headphones.
Pin plug
(white)
Standard plug
Connecting Audio Equipment (Figure 1)
Use commercially available connecting cords (mini
Plug × 1, Pin Plugs × 2) to connect as shown in Figure
1. Make sure that the end of the cord that you connect
to the digital piano is a stereo mini plug. A monaural
mini plug will result in output of only one of the two
stereo channels. Normally, you should set the input
selector of the audio equipment to the terminal where
the digital piano is connected (AUX IN, etc.) Adjust
volume using the digital piano’s VOLUME controller.
Connecting a Music Amplifier (Figure 2)
Connect the connecting cord* to one of the types of
amplifiers shown in Figure 2.
Adjust volume using the digital piano’s VOLUME
controller.
* Digital Piano: Stereo mini plug
Amplifier: Inputs signals for the left and right
channels. Not connecting either plug will
result in output of only one of the two
stereo channels.
E-5
PX120_e.book
6 ページ
2007年6月26日 火曜日 午前11時36分
Connections
SP-30 Pedal Functions
Connecting a Pedal
DAMPER PEDAL jack
Connecting the supplied pedal (SP-3) to the DAMPER
PEDAL jack makes it possible to use the pedal as a
damper pedal.
Pressing the damper pedal while playing will cause the
notes you play to reverberate for a very long time.
• When a GRAND PIANO tone (MODERN, CLASSIC,
VARIATION) is selected as the tone, pressing this
pedal will cause notes to reverberate just like the
damper pedal on an acoustic grand piano.
Back
z Damper Pedal
In addition to the damper pedal functions described
in the column to the left, the SP-30 pedal also
supports half-pedal operation, so pressing the pedal
part way applies only a partial damper effect.
z Soft Pedal
Pressing this pedal suppresses notes played on the
keyboard after the pedal was pressed, and makes
them sound softer.
z Sostenuto Pedal
Only the notes that are played while this pedal are
depressed are sustained until the pedal is released.
DAMPER PEDAL jack
Soft pedal
Damper pedal
Sostenuto pedal
NOTE
• The optional CS-65P or CS-66P stand is required in order
to use the SP-30 Pedal Unit.
SP-3
Bundled and Optional
Accessories
Pedal Connector
You can connect the optionally available 3-Pedal Unit
(SP-30) to the pedal connector on the bottom of the
digital piano. You can then use the pedals for
expression that is similar to that available on an
acoustic piano.
Bottom
Pedal connector
E-6
Use only accessories that are specified for use with this
digital piano.
Use of unauthorized accessories creates the risk of fire,
electric shock, and personal injury.
PX120_e.book
7 ページ
2007年6月26日 火曜日 午前11時36分
Playing with Different Tones
/ METRONOME
TONE/SETTING
POWER
VOLUME
Selecting and Playing a Tone
This digital piano has 11 built-in tones.
* You can select these tones using keyboard keys. The
name of the tones assigned to each keyboard key is
marked above the keys. For details about selecting
these tones, see “Selecting a Tone Using the
Keyboard Keys” on page E-8.
1.
Press the POWER button to turn on the
digital piano.
GRAND PIANO
NOTE
• Grand Piano Tones (MODERN, CLASSIC)
Your digital piano has a total of 11 built-in tones. The
MODERN and CLASSIC tones are stereo sampled tones
that can be selected using the GRAND PIANO buttons.
Try using the GRAND PIANO tones to familiarize
yourself with their distinctive sounds and characteristics.
Tone Name
Characteristics
MODERN
This tone provides a bright and hard
grand piano sound. The volume and
timbre of this tone is quick to
respond to different keyboard
pressures, and it has relatively strong
reverb. This tone is a good choice for
dynamic and lively performances.
CLASSIC
This is a natural piano tone that
closely resembles the sound of an
acoustic grand piano. Though reverb
and other effects are kept to a
minimum, doing so enhances the
impact of operating the piano pedals
(acoustic resonance), for musically
delicate expressions. This tone is a
good choice for lesson and practice
sessions.
POWER button
IMPORTANT!
• When you turn on the piano, it performs a power up
operation in order to initialize its system. During system
initialization, the LR button lamps flash for about six
seconds to let you know that system initialization is in
progress.
2.
Select the tone you want.
• Press one of the GRAND PIANO buttons to select
either a modern sound (MODERN) or a classic sound
(CLASSIC).
• A lamp will light above the currently selected button.
• See “Selecting a Tone Using the Keyboard Keys” on
page E-8 for information about selected other tones.
3.
Use the VOLUME controller to adjust the
volume level.
4.
Try playing something on the digital piano.
E-7
PX120_e.book
8 ページ
2007年6月26日 火曜日 午前11時36分
Playing with Different Tones
Selecting a Tone Using the Keyboard Keys
ʬʊʽ
ɹʳʁʍɹ
MODERN
CLASSIC
ʚʴɲ˂ʁʱʽ
VARIATION
GRAND PIANO
ɺʳʽʓʞɬʘ
1±
²
2
ʝʠʳʟɳʽ
VIBRAPHONE
ʝʠʳʟɳʽ
STRINGS
±
1
²
2
BASS
(LOWER)
ʣ˂ʃ
ᴥͲᬩ᥂ᴦ
ELEC PIANO
ɲʶɹʒʴʍɹʞɬʘ
HARPSICHORD
ʃʒʴʽɺʃ
PIPE
ORGAN
ʃʒʴʽɺʃ
Tone Setting Keys
1.
While holding down the TONE/SETTING
button, press the keyboard key that
corresponds to the tone you want to select.
TONE/SETTING button
Example: Pipe Organ
Bass Tones (BASS 1, BASS 2)
Selecting either of the two bass tones (BASS 1, BASS 2) on the right side of the tone setting keys in step 1 of the above
procedure will assign the selected bass tone to the low range (left side) of the keyboard. The high range (right side)
will be assigned the tone that was selected when you pressed the BASS 1 or BASS 2 key.
• The BASS 1 and BASS 2 keys let you effectively split the keyboard between two different tones.
Split Point
Low Range
High Range
BASS 1
PIPE ORGAN
(Currently selected tone.)
NOTE
• To return the keyboard to a single tone, select any tone other than BASS 1 or BASS 2.
• You cannot select BASS 1 or BASS 2 when recording to Track 2.
E-8
PX120_e.book
9 ページ
2007年6月26日 火曜日 午前11時36分
Playing with Different Tones
Adjusting the Brilliance of a
Tone
1.
While holding down the TONE/SETTING
button, use the BRILLIANCE keys to specify
a brilliance value in the range of –3 to 3.
Layering Two Tones
Use the following procedure to layer two tones, so they
sound at the same time.
1.
While holding down the TONE/SETTING
button, simultaneously press the keyboard
keys that correspond to the two tones that
you want to layer.
Example: To layer HARPSICHORD and STRINGS.
For this type of sound:
Press this keyboard
key:
Mellower and softer
T
Brighter and harder
S
HARPSICHORD
NOTE
• To return a tone to its initial default setting, press T and
S at the same time.
STRINGS
2.
To unlayer the keyboard, select another tone
by pressing the GRAND PIANO button or by
using the procedure under “Selecting a Tone
Using the Keyboard Keys” (page E-8).
NOTE
• You cannot layer the BASS 1 or BASS 2 tone with another
tone.
• You cannot perform the layer operation when recording
to Track 2.
E-9
PX120_e.book
10 ページ
2007年6月26日 火曜日 午前11時36分
Playing with Different Tones
Using Effects
Using the Metronome
Reverb . . . . Makes your notes resonate.
Chorus . . . Adds more breadth to your notes.
To configure reverb and chorus effect
settings
1.
1.
• This starts the metronome.
• The lamp above the X/„ button flash in time with the
metronome beat.
2.
While holding down the TONE/SETTING
button, press the REVERB or CHORUS
keyboard key.
• Reverb Value
Select this setting:
Turn off reverb
OFF
Turn on reverb
1: Room
2: Small Hall
3: Large Hall
4: Stadium
To change the beat, hold down the TONE/
SETTING button as you press one of the
METRONOME BEAT keys to select a beat
setting.
• You can specify a beat value of 0, 2, 3, 4, or 6 as the
beat. Specifying 0 as the setting plays a straight click,
without any chime. This setting lets you practice with
a steady beat.
Example: Selecting Reverb 4
To do this:
Press the METRONOME button.
3.
While holding down the TONE/SETTING
button, use the TEMPO keys to specify a
tempo value in the range of 20 to 255 beats
per minute.
• Chorus Value
To do this:
Select this setting:
Turn off chorus
OFF
Turn on chorus
1: Light Chorus
2: Medium Chorus
3: Deep Chorus
4: Flanger (Whooshing effect)
• Each press of the + or – key raises or lowers the
tempo value by 1.
• You can use the value input keys (0 to 9) to enter a
specific value. Be sure to input all three digits.
Example: To enter “96”, press keys 0, 9, 6.
E-10
PX120_e.book
11 ページ
2007年6月26日 火曜日 午前11時36分
Playing with Different Tones
4.
Press the METRONOME button or X/„
button to turn off the metronome.
Playing a Piano Duet
NOTE
You can use the Duet Mode to split the piano’s
keyboard in the center so two people can play a duet.
The left and right side keyboards have virtually the
same range. If you have the optionally available SP-30
Pedal Unit installed, the left pedal operates as the left
side damper pedal, while the right pedal is the right
side damper pedal.
The Duet Mode is the perfect way to conduct lessons,
with the teacher playing on the left side as the student
playing the same song on the right side.
• You can perform the following procedure at any time,
regardless of whether or not the metronome is sounding.
Keyboard
NOTE
• To return the tempo setting to the default tempo of the
currently selected Music Library tune or the tempo
recommended for the rhythm you are using, press the +
and – keys at the same time in step 3.
To adjust the metronome volume
1.
Split point
While holding down the TONE/SETTING
button, use the METRONOME VOLUME
keys to specify a volume value in the range of
0 to 42.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” on page E-25.
• Each press of the T orS key raises or lowers the
metronome volume value by 1.
Left keyboard
C3
C4
C5
Right keyboard
C6
C3
(middle C)
C4
C5
C6
(middle C)
Pedals
z Using the Optional SP-30 Pedal Unit
NOTE
Right side damper pedal
Left side damper pedal
• To return to the initial default setting, press T and S at
the same time.
Left and right side
damper pedal
NOTE
• Only the right-side damper pedal supports half-pedal
operation.
z Using the Optional SP-3 Pedal Unit
Right side damper pedal
NOTE
• Does not support half-pedal operation.
• Cannot be used for left-side damper pedal operation.
1.
Press one of the GRAND PIANO buttons
(MODERN or CLASSIC) to select the piano
tone you want to use for the duet.
NOTE
• You can use only the MODERN or CLASSIC tone for a
duet.
2.
Press the MODERN and CLASSIC GRAND
PIANO buttons at the same time.
• This will enter the Duet Mode and split the keyboard.
The GRAND PIANO lamp will flash momentarily to
let you know when the Duet Mode is entered.
E-11
PX120_e.book
12 ページ
2007年6月26日 火曜日 午前11時36分
Playing with Different Tones
3.
To exit the Duet Mode, press either the
MODERN or CLASSIC GRAND PIANO
button.
IMPORTANT!
• The digital piano also will exit the Duet Mode if you use
the TONE/SETTING button and tone setting keyboard
keys to select a tone in step 3.
• You cannot use the Duet Mode while using Auto
Accompaniment or while recording.
Changing the Octaves of the Keyboards
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings. This comes in handy, for example, if the initial
default range is not enough when one person is
playing the left hand part and another person is
playing the right hand part.
1.
While holding down the MODERN and
CLASSIC GRAND PIANO buttons, press the
keyboard key of C that you want located at
C4 (middle C) of the left keyboard.
Example: Press the keyboard key of the leftmost C will
assign the range shown below.
Left keyboard
C4
C5
C6
Right keyboard
C7
C3
C4
C5
C6
(Pressed key)
1 octave higher than initial
setting
2.
Unchanged
While holding down the MODERN and
CLASSIC GRAND PIANO buttons, press the
keyboard key of C that you want located at
C4 (middle C) of the right keyboard.
NOTE
• You can return the keyboards to their initial default
ranges by exiting and then re-entering the Duet Mode.
E-12
PX120_02_e.fm
13 ページ
2007年6月28日 木曜日 午後1時54分
Playing Back Built-in Songs
MUSIC LIBRARY
LR
/ IMPORTANT!
• After you select a built-in song, it can take a number of
seconds for the song data to be loaded. While the data is
being loaded, the keyboard keys and button operations
will be disabled. If you are playing something on the
keyboard, the following operation will cause output to
stop.
TONE/SETTING
Playing Back a Specific Music
Library Song
1.
Playing Back All of the Built-in
Songs
Your digital piano comes with a Music Library of 60
built-in tunes. You can play all 60 tunes in sequence,
from beginning to end.
1.
While holding down the MUSIC LIBRARY
button, press the X/„ button.
• This will start repeat demo playback of the built-in
songs in sequence, from 01 through 60.
• The MUSIC LIBRARY button and X/„ button lamps
flash during playback.
• You can play along with a song on the keyboard as it
is playing. The tone assigned to the keyboard is the
one that is preset for the song that is playing.
• You can select a specific song during demo playback.
For details, see step 2 under “Playing Back a Specific
Music Library Song”.
2.
Press the MUSIC LIBRARY button so the
lamp above the button is lit.
• Each press of the button toggles between the upper
lamp and lower lamp.
2.
Find the song number of the song you want to
play in the song list on page A-1.
3.
To change to another song, hold down the
TONE/SETTING button as you use the
SONG/RHYTHM SELECT keys to specify a
song number.
Press the X/„ button again to stop built-in
song play.
NOTE
• The tune selection and playback stop operations
described above are the only operations that are possible
during demo tune play.
• Each press of the + or – key raises or lowers the song
number by 1.
• You can use the value input keys (0 to 9) to enter a
specific song number. Be sure to input both digits.
Example: To select song 08, enter 0 and then 8.
E-13
PX120_02_e.fm
14 ページ
2007年6月28日 木曜日 午後1時54分
Playing Back Built-in Songs
IMPORTANT!
• Be sure to allow a bit of time between + and – key
operations. Performing a series of + and – key operations
too quickly can cause some of the operations to be
skipped. When selecting a song, use the number input
keys instead of the + and – keys if the song number you
want to select is far from the current selected song
number.
4.
Press the X/„ button.
• This starts the playback of the song.
5.
To stop playback, press the X/„ button
again.
• Playback will stop automatically when the end of the
song is reached.
NOTE
• Pressing the + and – keys at the same time will select
song number 01.
• You also can adjust the playback tempo and volume of
the song. See “Configuring Settings with the Keyboard”
on page E-24 for more information.
Practicing with a Music
Library Song
You can turn off the left hand part or right hand part of
a song and play along on the piano.
NOTE
• The Music Library includes duet tunes (song numbers
12, 37, and 45). While a duet is selected, you can turn off
the first piano <Primo> or second piano <Secondo> tone
and play along with the song.
• A number of tunes have tempo changes part way
through in order to produce specific musical effects.
PREPARATION
• Select the song you want to practice and adjust the
tempo. See “Configuring Settings with the Keyboard” on
page E-24.
1.
Use the LR button to turn off a part.
• Each press of the LR button cycles through the part
settings as shown below. The indicator lamps above
the button show which part is turned off.
Left hand
Right hand
Both parts
on
2.
Right hand
part off
Left hand
part off
Press the X/„ button.
• This starts playback, without the part you turned off
in step 1.
3.
4.
E-14
Play the missing part on the keyboard.
To stop playback, press the X/„ button
again.
PX120_e.book
15 ページ
2007年6月26日 火曜日 午前11時36分
Playing a Rhythm
RHYTHM
SYNCHRO/FILL-IN
/ Selecting a Rhythm
You can select from among 20 built-in rhythms.
1.
Press the RHYTHM button so the lamp below
it is lit.
TONE/SETTING
NOTE
• Pressing the + and – keys at the same time will select
rhythm number 01.
4.
Press the X/„ button.
• This will start the rhythm.
5.
Press the X/„ button again to stop the
rhythm.
• Each press of the button toggles between the upper
lamp and lower lamp.
2.
Find the rhythm number of the rhythm you
want to use in the Rhythm List on page A-1.
3.
To change to another rhythm, hold down the
TONE/SETTING button as you use the
SONG/RHYTHM SELECT keys to specify a
rhythm number.
• Each press of the + or – key raises or lowers the
rhythm number by 1.
• You can use the value input keys (0 to 9) to enter a
specific rhythm number. Be sure to input all twodigits.
Example: To select rhythm 03, enter 0 and then 3.
E-15
PX120_e.book
16 ページ
2007年6月26日 火曜日 午前11時36分
Playing a Rhythm
To adjust playback tempo
1.
While holding down the TONE/SETTING
button, use the TEMPO keys to specify a
tempo value in the range of 20 to 255 beats
per minute.
Using Auto Accompaniment
With Auto Accompaniment, the digital piano
automatically plays rhythm, bass, and chord parts in
accordance with chords you select using simplified
keyboard fingerings, or chords you play. Auto
Accompaniment makes it feel like you have your own
private backup group with you all the time.
NOTE
• Each press of the + or – key raises or lowers the
tempo value by 1.
• You can use the value input keys (0 to 9) to enter a
specific value. Be sure to input all three digits.
Example: To enter “96”, press keys 0, 9, 6.
NOTE
• Pressing the + and – keyboard keys at the same time will
return to the recommended tempo for the currently
selected rhythm.
E-16
• With the rhythms listed below, make sure that CASIO
CHORD, FINGERED, or FULL RANGE CHORD is
selected before you try playing chords. The percussion
sounds will sound at lower volume while no chord is
fingered on the keyboard.
10
ROCK’N’ROLL
14
ARPEGGIO 1
15
ARPEGGIO 2
16
MARCH 1
17
MARCH 2
18
STRIDE PIANO
19
WALTZ 1
20
WALTZ 2
PX120_e.book
17 ページ
2007年6月26日 火曜日 午前11時36分
Playing a Rhythm
To play with Auto Accompaniment
PREPARATION
• Use the procedures under “Selecting a Rhythm” to select
the rhythm you want to use and adjust the tempo.
1.
While holding down the TONE/SETTING
button, press a MODE keyboard key to select
a chord mode.
Example: Fingered
NOTE
• See “Configuring Settings with the Keyboard” on page
E-24 for information about adjusting accompaniment
volume.
How to Play Chords
The way you finger chords depends on the current
Auto Accompaniment mode. If you want to play
without Auto Accompaniment, use the NORMAL
mode.
„ CASIO CHORD
CASIO
CHORD
NORMAL
FULL RANGE
CHORD
Even if you do not know how to play chords normally,
this mode lets you play four different types of chords
using simplified fingerings in the accompaniment
keyboard range of the keyboard. The following shows
where the accompaniment keyboard range is located,
and explains how to finger chords in the CASIO
CHORD mode.
FINGERED
MODE
CASIO CHORD Mode Keyboard
Accompaniment
keyboard range
• See “How to Play Chords” on page E-17 for details
about Auto Accompaniment modes and their chord
fingerings.
2.
Melody keyboard range
IMPORTANT!
• In the CASIO CHORD mode, the keys in the
accompaniment keyboard range of the keyboard operate
as “chord switches” only. You cannot use the keys in this
keyboard range to play notes.
Press the SYNCHRO/FILL-IN button.
• This configures the digital piano so rhythm and
chord accompaniment will start automatically when
you press any keys within the accompaniment
keyboard range.
• This will cause the lamp above the X/„ button to
light.
3.
Finger the first chord within the
accompaniment keyboard range.
• The rhythm pattern starts to play automatically.
4.
Finger other chords on the keyboard.
• See “How to Play Chords” on page E-17 for
information about how to finger chords within the
different Auto Accompaniment modes.
• The lamp above the X/„ button will flash along with
the beat.
5.
To stop accompaniment, press the X/„
button.
E-17
PX120_e.book
18 ページ
2007年6月26日 火曜日 午前11時36分
Playing a Rhythm
„ FINGERED
Chord Types
Example:
Major Chords
Pressing a single
accompaniment keyboard
range key in the CASIO
CHORD mode will play
the major chord whose
name is marked above the
key. All of the
accompaniment keyboard
range keys that are
marked with the same
chord name play exactly
the same chord.
C (C Major)
Minor Chords
To play a minor chord,
press the accompaniment
keyboard range key that
corresponds to the major
chord, while also pressing
one other accompaniment
keyboard range key to the
right.
Cm (C Minor)
Seventh Chords
To play a seventh chord,
press the accompaniment
keyboard range key that
corresponds to the major
chord, while also pressing
two other accompaniment
keyboard range keys to
the right.
C7 (C Seventh)
Minor Seventh Chords
To play a minor seventh
chord, press the
accompaniment keyboard
range key that
corresponds to the major
chord, while also pressing
three other
accompaniment keyboard
range keys to the right.
Cm7 (C Minor Seventh)
Note names J
C C#DE b E F F#GAb A Bb B C C#DE b E F
In the FINGERED mode, you play standard chord
fingerings in the accompaniment keyboard range to
play chords. To finger a C chord, for example, you
would press the C-E-G keys.
FINGERED Mode Keyboard
Accompaniment
keyboard range
C C#DE b E F F#GAb A Bb B C C#DE b E F
C C#DE b E F F#GAb A Bb B C C#DE b E F
C C#DE b E F F#GAb A Bb B C C#DE b E F
Melody keyboard range
IMPORTANT!
• In the FINGERED mode, the keys in the accompaniment
keyboard range of the keyboard operate as “chord
switches” only. You cannot use the keys in this keyboard
range to play notes.
C
Cm
Cdim
Caug *1
Csus4
C7 *2
Cm7 *2
CM7 *2
Cm7b5
C7b5 *1
C7sus4
Cadd9
Cm add9
CmM7 *2
Cdim7 *1
NOTE
NOTE
• When playing a minor, seventh, or minor seventh chord,
it makes no different whether the additional keys you
press are black or white.
• See the “Fingered Chord Chart” on page A-2 for
information about fingering chords with other roots in
the accompaniment keyboard range.
*1 Inverted fingerings (see “Fingered Chord Notes” on
page E-19) are not supported for these chords. The
lowest note fingered is used as the root.
*2 For these chords, the same chord is specified even if
the G fifth is not fingered
E-18
PX120_e.book
19 ページ
2007年6月26日 火曜日 午前11時36分
Playing a Rhythm
Fingered Chord Notes
• Except for the chords whose names have *1 after
them in the above examples, you also can use
inverted fingerings. This means that fingering either
E-G-C or G-C-E will produces a C chord.
• Except for the chords whose names have *2 after
them in the above examples, you need to press all of
the indicated keys in order to finger a chord. Failure
to include even a single note may produce a chord
that is different from the one you want.
„ FULL RANGE CHORD
The FULL RANGE CHORD mode lets you play a total
of 38 different types of chords (the same chords
available in the FINGERED mode plus 23 more). FULL
RANGE CHORD recognizes the pressing of three or
more keyboard keys anywhere on the keyboard as a
chord fingering. Anything else (pressing one or two
keys, or playing any group of notes that does not form
a chord fingering that is recognized by the keyboard) is
treated as melody notes.
FULL RANGE CHORD Mode Keyboard
Accompaniment Keyboard/Melody Keyboard
z Recognized Chords
Type
Chord Types
FINGERED
Mode Chords
15 (See “FINGERED” on page E-18.)
23
For example, the following are chords
that have C as the bass note.
Other Chords
C6, Cm6, C69
Db D E F G Ab Bb
C, C, C, C, C, C, C,
B Dbm Dm Fm Gm Am Bbm
C, C, C, C, C, C, C,
Ddim Ab7 F7 Fm7 Gm7 Abadd9
C, C, C, C, C, C
Example: C Major or C chord
E
1
E
E G
C
G
C
2
1....
2....
Chord C
Chord C
E
NOTE
• When there are at least six semitones between the lowest
note and the next note to the right, the lowest note is
assumed to be the bass note.
E-19
PX120_e.book
20 ページ
2007年6月26日 火曜日 午前11時36分
Recording and Play Back
LR
RECORDER
/ You can store the notes you play in digital piano
memory for later playback.
Tracks
A track is a container of recorded data, and a song
consists of two tracks: Track 1 and Track 2. You can
record each track separately and then combine them so
they play back together as a single song.
Track 1
Record
While playing
back. . .
Song
Track 2
Record
Recording Data Storage
• Starting a new recording deletes any data that was
previously recorded in memory.
• Should power fail during recording, all of the data in
the track you are recording will be deleted.
IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no responsibility
for any damages, lost profits, or claims by third parties
arising from the deletion of recorded data due to
malfunction, repair, or for any other reason.
Using the RECORDER Button
Each press of the RECORDER button cycles through
the recording options in the sequence shown below.
Playback
Standby
Record
Standby
Normal
Memory Capacity
• You can record approximately 5,000 notes in digital
piano memory.
• The RECORDER lamp will flash at high speed
when memory runs low.
• Recording stops automatically if the number of
notes in memory exceeds the maximum.
Recorded Data
• Keyboard play
• Tone used
• Pedal operations
• Effect setting*
• Tempo setting*
• Layer setting*
• Rhythm Patterns*
• Chord fingering*
• Fill-in operations*
* Track 1 only
E-20
Lit
Flashing
Off
PX120_e.book
21 ページ
2007年6月26日 火曜日 午前11時36分
Recording and Play Back
Recording Your Keyboard Play
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
To record to a specific track of a song
1.
Press the RECORDER button twice so its
lamp is flashing.
• At this time the L lamp will flash to indicate that the
digital piano is standing by for recording to Track 1.
2.
4.
Start playing something on the keyboard.
• Recording will start automatically.
NOTE
• When recording to Track 1 with rhythm or Auto
Accompaniment: Press the X/„ button to start recording.
You also can start recording by pressing the SYNCHRO/
FILL-IN button, and then play a chord.
• When recording to Track 1 without rhythm or Auto
Accompaniment: Recording will start as soon as you
play anything on the keyboard.
5.
To stop recording, press the X/„ button
again.
• This will cause the RECORDER button and LR
button lamps to change from flashing to lit.
• To play back the track you just recorded, press the
X/„ button.
6.
After you are finished recording or playing
back, press the RECORDER button so its
lamp goes out.
Use the LR button to select the track to which
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example: Track 1 Selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording, and set the
tempo you want. If you are recording to
Track 1, you also can select a rhythm and
accompaniment mode.
• Tone (page E-7)
z Track 1 only
• Effect (page E-10)
• Tempo (page E-16)
• Rhythm (page E-15)
• Mode (page E-16)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings, and
then press the METRONOME button. See “Using the
Metronome” on page E-10 for more information.
E-21
PX120_e.book
22 ページ
2007年6月26日 火曜日 午前11時36分
Recording and Play Back
To record to one track of a song while
listening to the playback of the other
track
1.
Press the RECORDER button so its lamp is
lit.
2.
Press the LR button until the lamp of only the
track to which you want to play back is lit.
3.
Press the RECORDER button so its lamp is
flashing.
• This will cause the L lamp to flash.
4.
Use the LR button to select the track to which
you want to record.
Press the RECORDER button so its lamp is
lit.
NOTE
• When a song has something recorded in both tracks, you
can turn off one track and play back just the other track,
if you want. Whether a track is on or off is indicated by
the lamps above the LR button. Each press of the LR
button cycles through the different possible track on/off
settings.
2.
Press the X/„ button.
• This starts playback of the song and/or track you
selected.
NOTE
Example: To listen to playback of Track 1 as you record
to Track 2
• You can change the tempo setting as a track is playing.
• Press the X/„ button again to stop playback.
Flashing (Record Standby)
5.
Select the tone and effects (Track 1 only) you
want to use for your recording.
6.
Press the X/„ button or play something on
the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
E-22
1.
• Make sure that the indicator lamp for the record track
is flashing.
Lit (Play)
7.
Playing Back from Digital
Piano Memory
To stop recording, press the X/„ button.
PX120_e.book
23 ページ
2007年6月26日 火曜日 午前11時36分
Recording and Play Back
Deleting Recorded Data
The following procedure deletes a specific track of a
song.
IMPORTANT!
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot be
undone. Check to make sure you really do not need the
data in digital piano memory before you perform the
following steps.
1.
Press the RECORDER button so its lamp is
lit.
2.
Press the RECORDER button again so its
lamp is flashing.
3.
Use the LR button to select the track you
want to delete.
• This causes the lamp of the selected track to flash.
4.
Keep the RECORDER button depressed until
its lamp changes from flashing to lit.
Example: To delete Track 2
5.
Press the LR button.
• This deletes the selected track and enters playback
standby.
• To cancel the delete operation, press the RECORDER
button in place of the LR button.
NOTE
• Only the digital piano’s LR button and RECORDER
button are operational from step 4 until you actually
perform the delete operation in step 5. No other button
operation can be performed.
E-23
PX120_03_e.fm
24 ページ
2007年7月2日 月曜日 午前10時32分
Configuring Settings with the Keyboard
TONE/SETTING
In addition to selecting tones and Music Library tunes,
you also can use the TONE/SETTING button in
combination with the keyboard keys to configure
effect, keyboard touch, and other settings.
To configure settings with the
keyboard
4.
Release the TONE/SETTING button to
complete the setting procedure.
NOTE
• You can configure the digital piano so no operation tone
sounds in step 3. For details, see “bq Operation Tone”
under “Parameter List” on pages E-26 – E-28.
Keyboard Setting Operation Types
1.
Use the “Parameter List” on page E-26 to find
the setting you want to configure, and note its
details.
2.
Use “Keyboard Keys Used for Configuring
Settings” on page E-25 to find the location on
the keyboard for configuring the setting you
want.
3.
While holding down the TONE/SETTING
button, press the keyboard key for the setting
you want to configure.
• The digital piano will sound an operation tone after it
configures the setting.
Example: To lower the transpose setting by one
semitone by pressing the T keyboard key
once
There are three types of operations that you can
perform while configuring settings with the keyboard
keys: Type A, Type B, and Type C.
Type A: Direct input
Example: Pressing the STRINGS keyboard key to
select the STRINGS tone
Type B: Raising or lowering a setting using the + and
– or T and S keyboard keys
• Holding down a key raises or lowers the setting at
high speed.
• To return to the initial default setting, press both
keys at the same time.
Type C: Value input using the numeric keys (0 to 9)
Example: To enter “120”, press keys 1, 2, 0.
NOTE
• You can find out what operation type applies to each
setting by checking the “Operation Type” in the
“Parameter List” on page E-26.
E-24
PX120_e.book
25 ページ
2007年6月26日 火曜日 午前11時36分
Configuring Settings with the Keyboard
Keyboard Keys Used for Configuring Settings
• The numbers 1 through bs correspond to the same numbers in the “Parameter List” on page E-26.
[Left keyboard]
7Metronome Beat
6Tempo
9Metronome Volume
8Song, Auto Accompaniment volume
bkAuto Accompaniment mode
[Overall]
[Center keyboard]
5Song/Rhythm Select
1Tone selection
blTouch Response
[Right keyboard]
3Reverb
4Chorus
−
+
OFF ON
OFF ON OFF ON OFF
ON
2Brilliance
bmKeyboard Key (Transpose)
bnKeyboard tuning (Tuning)
boSend Channel
bpLocal Control
bqOperation tone
brBack Up
bsOperation lock
E-25
PX120_03_e.fm
26 ページ
2007年7月2日 月曜日 午前10時33分
Configuring Settings with the Keyboard
Parameter List
■ Tones
Parameter
Settings
Operation
Type
(page E-24)
Description
1 Tone selection
See page E-7.
Default: GRAND
PIANO
(MODERN)
A
Assigns a tone to the
keyboard.
(page E-7)
2 Brilliance
(BRILLIANCE)
–3 to 0 to 3
Default: 0
B
Specifies the brilliance of
notes.
(page E-9)
3 Reverb
(REVERB)
Off (OFF), 1 to 4
Default: 2
A
Specifies the reverb of
notes.
(page E-10)
4 Chorus
(CHORUS)
Off (OFF), 1 to 4
Default: Off
A
Controls the breadth of
notes.
(page E-10)
Remarks
• Chorus is not available in the Duet Mode.
• When tones are layered, Chorus is
applied only to the second tone you select
for layering.
• Turning on Chorus while a bass tone is
selected will apply the effect to the bass
tone only. Chorus will not be applied to
the high-range tone.
■ Song/Rhythm/Metronome
Parameter
Settings
Operation
Type
(page E-24)
Description
Remarks
5 Song/Rhythm
Select (SONG/
RHYTHM
SELECT)
01 to 60 (Tunes)
B (+/–)
01 to 20 (Rhythms) C (0 to 9)
Default: 01
Selects a Music Library
tune or rhythm.
(page E-13)
6 Tempo
(TEMPO)
020 to 255
Default: 120
B (+/–)
C (0 to 9)
Specifies the tempo of
• Always enter three digits when using the
Music Library songs, the
number keys (0 to 9) to input a value.
metronome, recording and
Example: To input 90, enter 0, 9, 0
playback, etc.
(leading zero required).
(page E-10)
A
Turns the metronome on or • The metronome beat setting cannot be
off.
changed while playback of a Music
(page E-10)
Library tune is in progress.
7 Metronome Beat 0, 2, 3, 4, 6
(METRONOME Default: 4
BEAT)
8 Song, Auto
00 to 42
B
Accompaniment Defaults:
volume
42 (Tunes)
38 (Accompaniments)
Specifies the volume of
rhythm and chord
accompaniment and builtin songs, independent of
overall volume control.
9 Metronome
Volume
Specifies the metronome
volume.
(page E-10)
00 to 42
Default: 36
B
bk Auto
NORMAL, CASIO A
Accompaniment CHORD,
mode (MODE) FINGERED, FULL
RANGE CHORD
Default: NORMAL
E-26
Specifies the Auto
Accompaniment mode.
(page E-17)
• Always enter two-digits when using the
number keys (0 to 9) to input a value.
Example: To input 8, enter 0, 8 (leading
zero required).
PX120_e.book
27 ページ
2007年6月26日 火曜日 午前11時36分
Configuring Settings with the Keyboard
■ Keyboard
Parameter
Settings
Operation
Type
(page E-24)
Description
Remarks
bl Touch Response Off (OFF), 1 to 3
(TOUCH
Default: 2
RESPONSE)
A
Specifies the relative touch
of the keyboard keys.
Setting a smaller value
causes lighter touch to
produce more powerful
sound.
bm Keyboard Key
(TRANSPOSE)
–12 to 0 to 12
Default: 0
B
Raises or lowers the tuning • The transpose setting cannot be
of the digital piano in
configured while Music Library playback
semitone steps.
is in progress and in the Duet Mode.
• Raising the key of the digital piano can
cause notes the highest notes in the range
of a tone to become distorted.
bn Keyboard tuning –99 to 0 to 99
(TUNING)
Default: 0
B
Raises or lowers the overall
pitch of the digital piano in
• The pitch setting cannot be changed while
1-cent steps (100 cents =
playback of a Music Library tune is in
1 semitone) from the
progress.
standard pitch of A4 =
440 Hz.
E-27
PX120_e.book
28 ページ
2007年6月26日 火曜日 午前11時36分
Configuring Settings with the Keyboard
■ MIDI and Other Settings
Parameter
Settings
Operation
Type
(page E-24)
Description
Remarks
bo Send Channel
01 to 16
Default: 01
B
Specifies one of the MIDI
channels (1 through 16) as
the Send Channel, which is
used for sending MIDI
messages to an external
device.
bp Local Control
Off, On
Default: On
A
Selecting “Off” for Local
Control cuts off the digital
piano’s sound source, so no
sound is produced by the • The Local Control setting cannot be
digital piano when keys are changed while playback of a Music
Library tune is in progress.
pressed. Turn off local
control when you want to
sound only the connected
MIDI device.
bq Operation Tone Off, On
Default: On
A
Selecting “Off” disables
• This setting is retained even when the
digital piano is turned off.
sounding of the operation
tone whenever a keyboard • The operation tone setting cannot be
key is pressed while the
changed while Music Library playback is
TONE/SETTING is
in progress, while a rhythm or the
depressed.
metronome is sounding, and during
recording.
br Back Up
A
When “On” is selected for
this setting, the digital
piano will remember its
current settings*1, and
restore them when it is
turned on again.
When “Off” is selected,
settings*2 are reset to their
initial defaults whenever
the digital piano is turned
on.
bs Operation Lock
E-28
Off, On
Default: Off
Off, On
Default: Off
A
• The back up setting cannot be changed
while Music Library playback is in
progress, while a rhythm or the
metronome is sounding, in the Duet
Mode, and during recording.
*1 The following settings are not
remembered.
• Duet Mode
• Tune LR (part) setting
• Local Control
*2 Except for the operation tone on/off
setting.
Selecting “On” for this
setting locks the digital
piano’s buttons (except for
the power button and the • The operation lock setting cannot be
buttons required for
changed while Music Library playback is
unlock), so no operation
in progress, while a rhythm or the
can be performed.
metronome is sounding, and during
Turn on operation lock
recording.
when you want to protect
against unintentional
button operations.
PX120_e.book
29 ページ
2007年6月26日 火曜日 午前11時36分
Configuring Settings with the Keyboard
Connecting to the MIDI
Terminal
What is MIDI?
MIDI is a standard for digital signals and connectors
that allows musical instruments, computers, and other
devices, regardless of manufacturer, to exchange data
with each other.
NOTE
• For details about MIDI implementation, visit:
http://world.casio.com/
MIDI Connections
Connecting your computer or other external MIDI
device to the digital piano’s MIDI OUT/IN terminals
makes it possible for them to exchange MIDI messages
and record and playback keyboard notes on the
connected device.
MIDI Cable
Rear
MIDI OUT
MIDI IN
MIDI Settings
You can use the procedure in “Configuring Settings
with the Keyboard” (page E-24) to configure MIDI
settings. See page E-28 for a description of the settings
and information about how to configure them.
E-29
PX120_03_e.fm
30 ページ
2007年7月2日 月曜日 午前10時34分
Reference
Troubleshooting
Problem
No sound is
produced when I
press a keyboard
key.
The pitch of the
digital piano is off.
Cause
Action
1. The VOLUME controller is set to
“MIN”.
2. Headphones are connected to the
digital piano.
3. MIDI Local Control is turned off.
4. Check the current accompaniment
mode setting. Normally, the
accompaniment keyboard range will
not produce any note while CASIO
CHORD or FINGERED is selected as
the Auto Accompaniment mode.
1. Rotate the VOLUME controller more
towards “MAX”.
2. Unplug the headphones from the
digital piano.
3. Turn on the Local Control setting.
4. Change the accompaniment mode to
NORMAL.
) E-7
1. The digital piano’s key setting is
something other than “0”.
1. Change the key setting to “0”, or turn
digital piano power off and then back
on again.
2. Adjust digital piano tuning, or turn the
digital piano off and then back on
again.
) E-27
2. Digital piano tuning is incorrect.
See Page
) E-5
) E-28
) E-17
) E-27
No sound is
produced when I try
to play back a built-in
song or a recorded
song.
1. The VOLUME controller is set to
“MIN”.
2. Headphones are connected to the
digital piano.
1. Rotate the VOLUME controller more
towards “MAX”.
2. Unplug the headphones from the
digital piano.
) E-7
When I play
something on the
digital piano, my
connected external
MIDI sound source
does not sound.
1. The digital piano’s send channel is
different from the send channel of the
external MIDI sound source.
1. Change the send channel settings of
the digital piano and/or the external
MIDI sound source so they are the
same.
2. Adjust the volume and expression
settings of the external sound source.
) E-28
A tone’s quality and
volume sounds
slightly different
depending where it is
played on the
keyboard.
This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.
* Multiple digital samples are taken for the low range, middle range, and high range of the original
musical instrument. Because of this, there may be a very slight difference in tonal quality and
volume between sample ranges.
When I press a
button, the note that
is sounding cuts out
momentarily or there
is a slight change in
how effects are
applied.
This happens when the sounds of multiple parts are sounding at the same time while using layer,
using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of these
conditions exists will cause the effect setting that is built into the tone to change automatically, which
causes the notes to cut out momentarily or causes a slight change in how effects are being applied.
E-30
2. The volume or expression setting of
the external sound source is “0”.
) E-5
) External
sound
source
user’s guide
PX120_03_e.fm
31 ページ
2007年7月2日 月曜日 午後3時57分
Reference
Product Specifications
Model
PX-120
Keyboard
88-key piano keyboard, with Touch Response
Maximum Polyphony
128 notes
Tones
11
• Layer (excluding bass tones)
• Split (Low-range bass tones only)
Effects
Brilliance (–3 to 3), Reverb (4 types), chorus (4 types), Acoustic Resonance
Metronome
• Beats: 0, 2, 3, 4, 6
• Tempo Range: 20 to 255
Duet
Adjustable tone range (–1 to 2 octaves)
Music Library
• Number of Songs: 60
• Song volume: Adjustable
• Part On/Off: L, R
Auto Accompaniment
•
•
•
•
•
Number of Rhythms: 20
Tempo Range: 20 to 255
Controllers: START/STOP, SYNCHRO/FILL-IN
Auto Accompaniment modes: NORMAL, CASIO CHORD, FINGERED, FULL RANGE CHORD
Accompaniment Volume Level: Adjustable
Recorder
•
•
•
•
•
Functions: Real-time recording, playback
Number of Song: 1
Number of Tracks: 2
Capacity: Approximately 5,000 notes total
Recorded Data Protection: Built-in flash memory
Pedals
Damper (Soft and sostenuto pedal operations enabled by the optional SP-30 Pedal Unit.)
Other Functions
•
•
•
•
MIDI
16-channel multi-timbre receive
Inputs/Outputs
• PHONES jack: Stereo mini jacks × 2
Output impedance: 170Ω
Output Voltage: 5.5V (RMS) MAX
• Damper Pedal Jack: Standard jack
• Power: 12V DC
• MIDI OUT/IN terminals
• Pedal connector (for optional SP-30 only)
Speakers
(12cm × 6cm oval) × 2 (Output: 8.0W + 8.0W)
Power Requirements
AC Adaptor: AD-12
Power Consumption
12V
Dimensions
132.2 (W) × 27.8 (D) × 13.4 (H) cm (52 1/16 × 10 15/16 × 5 1/4 inch)
Weight
Approximately 11.4 kg (25.1 lbs)
Touch Select: 3 types, Off
Transpose: ±1 octave (–12 to 0 to 12)
Tuning: A4 = 440.0 Hz ±99 cents (variable)
Operation Lock
18W
• Specifications and designs are subject to change without notice.
E-31
PX120_e.book
32 ページ
2007年6月26日 火曜日 午前11時36分
Reference
Operating Precautions
Be sure to read and observe the following operating
precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high
humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of
the product, but interference from the product can
cause audio or video interference of a nearby
device.
■ User Maintenance
• Never use benzene, alcohol, thinner, or other
chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a
soft cloth moistened in a weak solution of water
and a mild neutral detergent. Wring all excess
moisture from the cloth before wiping.
■ Included and Optional Accessories
Use only accessories that are specified for use with
this product. Use of unauthorized accessories creates
the risk of fire, electric shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product.
These are “weld lines” that result from the plastic
molding process. They are not cracks or scratches.
■ Musical Instrument Etiquette
Always be aware of others around you whenever
using this product. Be especially careful when
playing late at night to keep the volume at levels that
do not disturb others. Other steps you can take when
playing late at night are closing the window and
using headphones.
E-32
• Any reproduction of the contents of this manual,
either in part or its entirety, is prohibited. Except
for your own, personal use, any other use of the
contents of this manual without the consent of
CASIO is prohibited under copyright laws.
• IN NO EVENT SHALL CASIO BE LIABLE FOR
ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS
OF PROFITS, BUSINESS INTERRUPTION, LOSS
OF INFORMATION) ARISING OUT OF THE USE
OF OR INABILITY TO USE THIS MANUAL OR
PRODUCT, EVEN IF CASIO HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
• The contents of this manual are subject to change
without notice.
PX120_e.book
1 ページ
2007年6月26日 火曜日 午前11時36分
Appendix/Apéndice
Tone List/Lista de tonos
Song List/Lista de canciones
Program
Change/
Cambio de
programa
Bank Select
MSB/
MSB de
selección de
banco
Maximum
Polyphony/
Polifonía
máxima
GRAND PIANO
(MODERN)
0
48
GRAND PIANO
(CLASSIC)
0
GRAND PIANO
(VARIATION)
0
ELEC PIANO 1
ELEC PIANO 2
Tone Name/
Nombre de tonos
No./Nº
Song Name/Nombre de canciones
01
Nocturne Op.9-2
02
Fantaisie-Impromptu Op.66
03
Étude Op.10-3 “Chanson de l’adieu”
64
04
Étude Op.10-5 “Black Keys”
05
Étude Op.10-12 “Revolutionary”
49
64
06
Étude Op.25-9 “Butterflies”
07
Prélude Op.28-7
50
128
08
Valse Op.64-1 “Petit Chien”
4
48
128
09
Valse Op.64-2
5
48
64
10
Moments Musicaux 3
HARPSICHORD
6
48
128
11
Impromptu Op.90-2
VIBRAPHONE
11
48
128
12
Marche Militaire 1 (Duet)
PIPE ORGAN
19
48
128
13
Frühlingslied [Lieder Ohne Worte Heft 5]
STRINGS
49
48
128
14
Fröhlicher Landmann [Album für die Jugend]
BASS 1
32
48
128
15
Von fremden Ländern und Menschen [Kinderszenen]
BASS 2
32
49
64
16
Träumerei [Kinderszenen]
17
Tambourin
18
Menuet BWV Anh.114 [Clavierbüchlein der Anna Magdalena
Bach]
Rhythm List/Lista de ritmos
No./Nº
Rhythm Name/Nombre de ritmo
19
Inventio 1 BWV 772
20
Inventio 8 BWV 779
21
Inventio 13 BWV 784
22
Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]
01
02
8 BEAT
PIANO BALLAD 1
03
PIANO BALLAD 2
04
EP BALLAD 1
25
Sonatina Op.36-1 1st Mov.
05
EP BALLAD 2
26
Sonatine Op.20-1 1st Mov.
06
07
BLUES BALLAD
JAZZ COMBO 1
27
Sonate K.545 1st Mov.
28
Sonate K.331 3rd Mov. “Turkish March”
08
09
JAZZ COMBO 2
RAGTIME
29
Rondo K.485
30
Für Elise
10
11
ROCK’N’ROLL
BOOGIE WOOGIE
31
Marcia alla Turca
32
Sonate Op.13 “Pathétique” 1st Mov.
12
13
BOSSA NOVA
GOSPEL
33
Sonate Op.13 “Pathétique” 2nd Mov.
34
Sonate Op.13 “Pathétique” 3rd Mov.
14
15
ARPEGGIO 1
ARPEGGIO 2
35
Sonate Op.27-2 “Moonlight” 1st Mov.
36
Rhapsodie 2
16
17
MARCH 1
MARCH 2
18
19
STRIDE PIANO
WALTZ 1
20
WALTZ 2
23
Le Coucou
24
Gavotte
37
Waltz Op.39-15 (Duet)
38
Liebesträume 3
39
Blumenlied
40
La Prière d’une Vierge
41
Csikos Post
42
Humoresque Op.101-7
43
Melodie [Lyrische Stücke Heft 2]
44
Sicilienne Op.78
45
Berceuse [Dolly] (Duet)
46
Arabesque 1
47
La Fille aux Cheveux de Lin [Préludes]
48
Passepied [Suite bergamasque]
49
Gymnopédie 1
50
Je Te Veux
51
Salut d’Amour
52
The Entertainer
53
Maple Leaf Rag
54
L’arabesque [25 Etüden Op.100]
55
La Styrienne [25 Etüden Op.100]
56
Ave Maria [25 Etüden Op.100]
57
Le retour [25 Etüden Op.100]
58
La chevaleresque [25 Etüden Op.100]
59
No.13 [Études de Mécanisme Op.849]
60
No.26 [Études de Mécanisme Op.849]
A-1
A-2
F
#
F /(Gb )
G
#
(G )/Ab
A
#
(A )/B b
B
#
F /(Gb )
G
#
(G )/Ab
A
#
(A )/B b
B
Chord
Type
F
Root
E
m7 b 5
E
dim
#
(D )/E b
M7
#
(D )/E b
dim7
D
m7
D
7
#
C /(D b)
m
#
C /(D b)
M
C
Chord
Type
aug
sus4
7sus4
m add9
mM7
7b5
add9
2 ページ
C
Root
PX120_e.book
2007年6月26日 火曜日 午前11時36分
Appendix/Apéndice
Fingered Chord Chart/Cuadro de acordes digitados (Fingered)
MIDI Implementation Chart
Model PX-120
Function...
Transmitted
Recognized
Basic
Channel
Default
Changed
1 - 16
1 - 16
1 - 16
1 - 16
Mode
Default
Messages
Altered
Mode 3
X
Mode 3
X
21 - 108
0 - 127
0 - 127*1
O 9nH v = 1 - 127
X 8nH v = 64
O 9nH v = 1 - 127
X 9nH v = 0.8nH V =**
X
X
X
O
X
O
O
X
O
X
X
X
X
X
X
X
O
O
O
X
X
X
X
X
X
X
X
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O 0 - 127
O 0 - 127
System Exclusive
O
O
System
Common
: Song Pos
: Song Sel
: Tune
X
X
X
X
X
X
System
Real Time
: Clock
: Commands
O
O
X
X
Aux
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
X
O
X
X
X
O
O
X
Note
Number
True voice
Velocity
Note ON
Note OFF
After
Touch
Key’s
Ch’s
Pitch Bender
0,32
1
6, 38
7
10
11
16
17
18
19
64
66
67
76
77
78
80
81
82
83
91
93
100, 101
120
121
Control
Change
Program
Change
Messages
Version : 1.0
Remarks
*1: Depends on tone
*1: Depende del tono.
**: no relation
**: sin relación
Bank select
Modulation
Data entry
Volume
Pan
Expression
DSP Parameter0*2
DSP Parameter1*2
DSP Parameter2*2
DSP Parameter3*2
Damper
Sostenuto
Soft pedal
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4*2
DSP Parameter5*2
DSP Parameter6*2
DSP Parameter7*2
Reverb send
Chorus send
RPN LSB, MSB*3
All sound off
Reset all controller
:True #
Remarks
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
*2
*2
*3
*3
*4
*4, *5
:
:
:
:
:
For details, see MIDI Implementation at http://world.casio.com/.
Si desea más información, vea Implementación MIDI en http://world.casio.com/.
Pitch Bend Sensitivity, Fine Tune, Coarse Tune, Modulation Depth, Null
Sensibilidad de inflexión de tono, afinación precisa, afinación poco precisa, profundidad de modulación, nulo
Universal Real-time Exclusive Messages: Master Volume, Master Balance, Master Fine Tuning, Master Coarse Tuning, Reverb Parameter,
Chorus Parameter, GM System Message
*4 : Mensajes exclusivos de sistemas universales en tiempo real: Volumen maestro, balance maestro, afinación precisa maestra, afinación
poco precisa maestra, parámetro de reverberación, parámetro de coro, mensaje de sistema GM
*5 : This model’s System Exclusive Message
• For details about footnotes 3 through 5, see MIDI Implementation at http://world.casio.com/.
*5 : Mensaje exclusivo del sistema de este modelo
• Si desea más información sobre los pies de página 3 a 5, vea Implementación MIDI en http://world.casio.com/.
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O : Yes
X : No
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
C
MA0707-A Printed in China
PX120ES1A