Wyrestorm SW-1102 Operating instructions

Model No: SW-1102
11 Input to 2 HDMI Output
Switcher & Scaler
Operating Instructions
Thank you for purchasing this Wyrestorm product.
Please read this instruction manual carefully
before use.
Introduction
With retrofit installations can be complex and difficult to manage due
to, customer requirements for multiple devices to connect via single
HDMI, with numerous formats and connections to be catered for.
Wyrestorm Switchers and Scalers overcome that problem by
providing multi-format plug and play solutions to get you connected
quickly and easily.
The SW-1102 is a multi-function switcher and scaler that allows the
conversion of up to 11 multi-format inputs to 2 HDMI outputs up to
full HD 1080p video and HD audio.
•
•
•
•
•
•
•
Inputs supported include:
1 x VGA source
1 x S-Video source
2 x AV sources with stereo audio
2 x YPbPr sources with analog audio
4 x HDMI sources (with one supporting 5.1 multichannel
digital audio)
1 x DVI-I source with analog audio and digital audio via
optical*
The SW-1102 also allows upscaling and switching from standard
definition/high definition sources to resolutions up to 720p or 1080p,
with both outputs working simultaneously - some VESA formats can
be bypassed by using VGA and DVI-I ports.
2
The unit also automatically amplifies and equalizes signals to
ensure the optimum HD transmission over the length of the HDMI
cable without any loss in quality of picture or audio.
Whatever the project requirements, if multiple formats, devices and
connectors are an issue, Wyrestorm Switcher and Scaler products
can provide the perfect “Get out of jail” solution.
3
Contents
Introduction ........................................................................................ 2/3
Features ............................................................................................. 5/6
Safety Precautions ................................................................................ 7
Package Contents................................................................................. 8
Panel Descriptions (front) ..................................................................... 8
Panel Descriptions (rear) ...................................................................... 9
IR Remote ........................................................................................... 10
On-Screen Menu (OSM) ..................................................................... 11
Input/Output Format ............................................................................ 12
Connection & Operation ................................................................ 12/13
Typical Application .............................................................................. 13
Specification ........................................................................................ 14
IR Extender .................................................................................... 14/15
RS232 ................................................................................................. 15
Maintenance ....................................................................................... 16
Product Service: Provided Service ..................................................... 16
Product Service: Mail-in Service .................................................... 16/17
Product Service: Warranty, Warranty Limits & Exclusions ............ 17/18
Wyrestorm Contact Details ................................................................. 19
4
Product Overview – SW-1102
■ Features
Inputs supported:
•
1 x VGA source
•
1 xS-Video source
•
2 x AV sources with stereo audio
•
2 x YPbPr sources with analog audio
4 x HDMI sources (with one supporting 5.1 multichannel
digital audio)
1 x DVI-I source with analog audio and digital audio via
optical*
•
•
*Should both analog and digital audio be connected, the digital audio has
priority. Analog audio from the input is digitized and output to both the HDMI
connection and the digital audio outs. HDMI outputs also have separate
analog audio outputs.
•
•
•
HDMI outputs also have separate analog audio outputs.
Allows display to view any source at anytime
Supports bypass function with VGA and DVI-I ports
5
•
•
•
•
•
•
•
•
•
DVI-I supports both analog and digital formats with L/R and
optical audio input
Detached audio output by L/R and optical
Delivers uncompressed digital video with zero signal loss
Supports high definition resolutions 1080p, 1080i, 720p and
standard video formats
Scales to 720p or 1080p
Can by-pass scaling and output as source
10-bit triple-ADC for RGB/YPbPr
Dual switching option: IR control with remote handset and
manual front panel control
Additional Remote control function with RS232 connectivity
6
■ Safety Precautions
Wyrestorm reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
Warning
To reduce the risk of fire, electric shock or product damage:
1. Do not expose this apparatus
to rain, moisture, dripping or
splashing and that no objects
6. Clean this apparatus
only with dry cloth.
filled with liquids, such as vases,
shall be placed on the apparatus.
2. Do not install or place this unit
7. Unplug this apparatus
in a bookcase, built-in cabinet or
during lightning storms or
in another confined space.
when unused for long
Ensure the unit is well ventilated.
periods of time.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
9. Only use attachments /
accessories specified by
the manufacturer.
that produce heat.
5. Do not place sources of naked
10. Refer all servicing to
flames, such as lighted candles,
qualified service
on the unit.
personnel.
7
■
Package Contents
① Main unit. Wyrestorm SW-1102 Switcher & Scaler
② 5vDC mains power supply
③ 1x remote control handset (Battery type: CR2025 3V).
④ Product Manual - Printed and digital copies (digital copy also
downloadable from website)
⑤ IR Extension cable
■ Panel Descriptions
Front
1.
Inputs source LED indication numbered 1-11
2.
Input selector – turn left or right to scroll through connected sources
3.
Power standby
4.
Output resolution selection – press to scroll between 720p, 1080p and
Bypass (Bypass option used for VGA and DVI inputs)
5.
IR window
6.
720p selection indicator (LED lit when selected)*
7.
Power standby (LED lit when unit is in standby)
8.
1080p selection indicator (LED lit when selected)*
9.
Power switch
*
Bypass selection indicated by neither LEDs lit
8
Rear
1.
Composite AV inputs 1 & 2
2.
Composite AV 1 & 2 stereo audio input (L/R)
3.
VGA input
4.
S-Video input
5.
Component YPbPr inputs 1 & 2
6.
Component YPbPr 1 & 2 stereo audio input (L/R)
7.
DVI-I input
8.
Optical audio input
9.
Stereo audio (L/R)
10. HDMI Inputs 1-4
11. HDMI input including 5.1 audio support
12. HDMI Output 1 &2
13. Analog audio output (L/R)
14. Optical audio output
15. IR Extension
16. 5vDC Power Input
17. RS232 Port
9
■ IR REMOTE
①
STANDBY: press to enter and exit standby mode.
②
INFO: view input and output messages from the SW-1102
③
INPUT SOURCE: press for direct selection of specific input source.
④
UP/DOWN: Scroll numerically through inputs.
⑤
UP/DOWN/LEFT/RIGHT: UP/DOWN to move highlighter bar to desired
parameter in On-Screen Menu (OSM) menu. Press LEFT/RIGHT to
increase/decrease setting value of selected parameters.
⑥
MENU: Activates OSM (on-screen menu)
⑦
PC BYPASS: Enters bypass mode (for VGA and DVI inputs)
⑧
720p: Select to directly output 720p resolution.
⑨
1080p: Select to directly output 1080p resolution.
10
■ (OSM) ON-SCREEN MENU
PICTURE
PC
OSD
Contrast
0~100 of contrast level
Brightness
0~100 of bright level
Saturation
0~100 of saturation level
Sharpness
0~100 of sharpness level
Hue
0~100 of sharpness level
picture mode
Standard/ dynamic/ soft /personal
Scale
Full/ overscan/ underscan/ letterbox/ panscan
NR
High/ mid /low/ auto/ off
Reset
Reset the above parameters to default factory settings.
Contrast
0~100 contrast level
Brightness
0~100 of bright level
H-position
0~100 of H position level
V-position
0~100 of V position level
H-size
0~20 of H size level
V-size
0~20 of V size level
Reset
Reset the above parameters to default factory settings.
H-position
0~100 of H position level
V-position
0~100 of V position level
Duration
5s/ 15s/ 30s/ 60s
Halftone
0~8 of halftone level
Reset
Reset the above parameters to the default factory settings
11
■ INPUT/OUTPUT FORMAT
INPUT
AV/SV
PAL, NTSC
480i, 480p, 576i, 576p, 720p@[50/60], 1080i@[50/60],
YPBPR/HDMI
1080p@[50/60]
800x600@60, 1024x768@60, 1152x864@60,
VGA/DVI(RGBHV)
1280 x768@60, 1280 x960@60, 1280x1024@60,
1440 x900@60, 1400 x1050@60, 1600 x1200@60,
800x600@60, 1024x768@60, 1280x1024@60,
VESA-BYPASS
1280 x960@60, 1440 x900@60, 1600 x1200@60
OUTPUT
AV/SV/YPBPR/HDMI/VGA/DVI
720p@[50/60] 1080p@[50/60]
800x600@60,1024x768@60,1280x1024@60,
VESA-BYPASS
1280 x960@60,1440 x900@60,1600 x1200@60
 NOTE: RS485 port and LAN port are for matrix control. The LAN port is connected to
the computer via direct UTP and connected to the router via cross UTP.
■
1)
Connection & Operation
Connect your multi-format digital or analog AV input sources to the
SW-1102 Switcher and Scaler, ensuring device format, cables and
connectors are supported by the unit and suitable for the chosen port.
2)
Using good quality HDMI cables no longer than 15m/49ft in length,
connect the SW-1102 to HDMI output devices (
such as HD-LCD
display or HD-DLP).
3)
Power on sources to be used – we recommend keeping unused inputs
switched off so as not to interfere with normal display.
4)
Connect the SW-1102 to the power supply included and choose your
12
display output.
5)
Select sources by using the input selector or remote handset.– turn left or
 NOTE1: VGA and AV2 share the same L/R audio input, S-video and YPBPR2 share
the same L/R audio.
Attention
1. SW-1102 memory - when restarting the unit, input/output selection will resume as
per previous selection.
2. Under bypass mode, when switching from VGA or DVI-I to other inputs, the output
will be set to 1080p.
3. Output will be set to 1080p when powered from Bypass mode.
4. Bypass function is for VGA and DVI-I input s only.
5. Other than VESA, output will be automatically set to 1080p.

Attention: Insert / Extract cables gently.
 NOTE2: SW-1102 accepts AV，SV, VGA, YPBPR，DVI-I and HDMI inputs.
■
Typical Application
13
■
Specifications
Operating Temperature Range
-5 to +35°C (-41 to +95 °F)
Operating Humidity Range
5 to 90 % RH (no condensation)
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Output Video
HDMI1.2
Maximum Transmission Distance
<15m/49ft (If needed, HDMI extender
is optional)
Power Consumption
15wtts (Max.)
Power Supply
5VDC
Dimensions
Mass (Main unit)
430mmW×48mmH×200mmD/16.9''W
×1.9''H×7.9''D
2.4kgs/5.3lb
 Note: Specifications are subject to change without notice. Mass and dimensions are
approximate.
■
IR extender control
14
Users can use the included IR receiver cable to change the IR receiver
position should IR signals become obstructed by the location of the unit (such
as positioned in a rack or cupboard).
If controlling the SW-1102 through the 1/8” (3.5 mm) input jack on the rear
panel, connect the IR cable directly to the IR EXT port.
■
RS232 remote control.
Com port setting:
Baud rate
9600 bps
Data bits
8 bits
Parity
None
Stop bits
1 bit
Flow control
None
15
■
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine
to clean this unit.
■ Product Service
● Provided Service
1)
Damage Requiring service: The unit should be serviced by qualified
service personnel if:

The DC power supply cord or AC adaptor has been damaged;

Objects or liquids have gotten into the unit;

The unit has been exposed to rain;

The unit does not operate normally or exhibits a marked change in
performance;

2)
The unit has been dropped or the cabinet damaged.
Servicing Personnel: Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to
authorized servicing personnel.
3)
Replacement parts: When parts need replacing ensure the service uses
parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result
in fire, electric shock, or other hazards.
4)
Safety check: After repairs or service, ask the service to perform safety
checks to confirm that the unit is in proper working condition.
● Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured
and preferably in the original carton. Include a letter detailing the complaint and
16
provide a daytime phone and/or email address where you can be reached.
If repair is needed during the limited warranty period the purchaser will be
required to furnish a sales receipt/proof of purchase indicating date of
purchase, amount paid and place of purchase. Customer will be charged for
the repair of any unit received without such proof of purchase.
● Warranty
If your product does not work properly because of a defect in materials or
workmanship, Wyrestorm (referred to as “the warrantor”) will, for the length of
the period indicated as below, （Parts (2) Year， Labor(90) Days）which starts
with the date of original purchase (“Limited Warranty period”), at its option
either (a) repair your product with new or refurbished parts, or (b) replace it
with a new or a refurbished product. The decision to repair or replace will be
made by the warrantor.
During the “Labor” Limited Warranty period there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts. You must
mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers product purchased as
new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
● Warranty Limits and Exclusions
1)
This Limited Warranty ONLY COVERS failures due to defects in
materials or workmanship, and DOES NOT COVER normal wear and
tear or cosmetic damage. The Limited Warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result
from accidents, misuse, abuse, neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of
17
consumer controls, improper maintenance, power line surge, lightning
damage, modification, or service by anyone other than a Factory Service
Center or other Authorized Service, or damage that is attributable to acts
of God.
2)
There are no express warranties except as listed under “limited
warranty coverage”. The warrantor is not liable for incidental or
consequential damages resulting from the use of this product, or
arising out of any breach of this warranty. (As examples, this excludes
damages for lost time, cost of having someone remove or re-install an
installed unit if applicable, travel to and from the service location, loss of
or damage to media or images, data or other recorded content. The items
listed are not exclusive, but are for illustration only.)
3)
Parts and service, which are not covered by this limited warranty,
are the responsibility of the purchaser.
18
Thank you for your purchase.
Please contact us with your questions or comments.
US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133
Tel: + 901 384 3575 Fax: + 901 384 3574
European Office: Unit 22, Ergo Business Park, Kelvin Road, Greenbridge,
Swindon, SN3 3JW
Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583
Email:
[email protected] (North America)
[email protected] (ROTW)
Website: www.wyrestorm.com