advertisement
Content
Introduction
Safety Precautions
Important Safety Instructions
Caution
Features
Front Panel and Rear Panel Illustration
Remote Control
Connections
TV set Connecting
Digital Audio Connecting
Advanced Features
Function Operation
SYSTEM setup
Others
Troubleshooting
Specifications
1
9
12
19
20
7
8
4
4
2
3
5
6
AVIS
RISQUE CHOC ELECTRIQUE NE
PAS OUVRIR
2
4.
5.
6.
7.
8.
9.
10.
Please follow it strictly.
11.
12.
13.
16.
17.
14.
15.
3
18.
Please use the original box and packing materials for safe transportation of this product.
It is normal for the cover and rear panel to become warm after the player has been operation for an extended period of time.
Do not move this product during playback. Doing so may cause damage to the pickup and the disc.
Press OPEN/CLOSE on the front panel or remote to open or close the disc tray.
Do not push or touch the tray while it is opening or closing.
Features
Disc formats supported by this player:
BD-ROM
32
Introduction
Subtitle choices
Dolby Digital
DVD video
8 Audio choices
16:9 LB
TV Aspect Ratio modes
R RESTRICTED Parental Lock
9 Multi-angle
This product incorporates copyright protection technology that is protected by method claims of certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intendedfor home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories."Dolby" and the double-D symbol are trademarks of
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)
this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
Front panel
1
1 POWER
2 CABIN DOOR
3 BD LIGHT
4 VFD SCREEN
2 3
5 SENSOR
6 OPEN/CLOSE BUTTON
7 PLAY/PAUSE BUTTON
8 STOP BUTTON
4
Rear panel(2CH Audio output)
5 6 7 8 9 10
9 PREV BUTTON
10 NEXT BUTTON
1 2 3 4 5 6
5
7
1
3
2 CH Audio output(L,R)
Component Video output (Y, Pb, Pr)
Digital Audio OPTICAL output
SERVICE
Rear panel(7.1CH Audio output)
7
2
4
6
COMPOSITE VIDEO output
Digital Audio COAXIAL output
HDMI output
1 2 3 4 5 6 7
1
3
5
7
7.1 CH Audio output
(SR,SL,RR,RL,SW,CEN,FR,FL)
Component Video output (Y, Pb, Pr)
Digital Audio OPTICAL output
SERVICE
2
COMPOSITE VIDEO output
4
6
Digital Audio COAXIAL output
HDMI output
5
Remote Control
Remote Control
32
33
34
STANDBY
ANGLE
POP MENU/TITLE
SECONDARY AUDIO
23
MOVE( )
24
SETUP
20
21
22
STEP
REV
FWD
25
26
27
28
29
VOL+
VOL-
0-9 NUMBER KEY
REPEAT
A-B
RETURN
30
31
32
33
34
STANDBY OPEN/CLOSE
ANGLE
POP MENU/TITLE
SUBTITLE
MENU
AUDIO
RANDOM
SECONDARY
AUDIO
BONUS
VIEW
SECONDARY
SUBTITLE
ENTER
SETUP
STEP SLOW
DISPLAY
REV FWD PREV NEXT
MUTE
+
VOL
STOP
1
4
7
0
REPEAT
2
5
8
GOTO
A-B
3
6
9
RESOLUTION
RETURN
3
4
5
6
1
2
7
8
9
10
11
12
13
14
15
16
17
18
19
Battery installation
1.Open the cover
O
PEN
2.Install batteries
Introduction
OPEN/CLOSE
AUDIO
SUBTITLE
RANDOM
MENU
COLOUR (RED,
GREEN, YELLOW, BLUE)
SECONDARY SUBTITLE
BONUS VIEW
ENTER
DISPLAY
SLOW
NEXT
PREV
PLAY
MUTE
PAUSE
STOP
RESOLUTION
GOTO
3.Close the cover
O
PE
N
Using the remote
Point the remote control at the remote sensor.
(The pictures below are for reference only.)
STANDBY OPEN/CLOSE
ANGLE SUBTITLE
POP MENU/TITLE MENU
AUDIO
RANDOM
SECONDARY
AUDIO
BONUS
VIEW
SECONDARY
SUBTITLE
ENTER
SETUP
STEP SLOW
DISPLAY
REV FWD PREV NEXT
MUTE
+
VOL
STOP
7
0
1
4
2
5
3
6
8
GOTO
9
RESOLUTION
REPEAT A-B RETURN
6
Notes:
Point the remote control directly at the player's remote sensor.
Do not leave the remote control in an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Inserting the 2AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.
Connections
Y
U
V
HDMI
R
L
VIDEO
AUDIO IN
VIDEO IN
YPbPr IN
HDMI IN
CONNECT BD PLAYER TO TV SET BY AV CABLE
Connect the BD player s L and R jack to the audio input jack on the TV.
Connect the BD player s video out jack to the video input jack of TV.
CONNECT THE BD PLAYER TO TV SET USING THE Y/Pb/Pr JACKS
Use the COMPONENT Cable(not supplied) to connect BD player to your TV.
Set the [Primary output] to [Component].
Connect the BD player s L and R jack to the audio input jack on the TV.
Notes: The BD player component output supports 1080i, 720P, 576P and 576i.
You can press RESOLUTION key on the remote controller to set the BD player component output. If your TV does not accept your resolution setting, an abnormal picture appears on the screen. Please read TV s owner s manual then set the resolution that your TV can accept.
CONNECT THE BD PLAYER TO TV SET USING THE HDMI OUTPUT
Use the HDMI cable (not supplied) to connect BD player to your TV.
Notes: The player supports video resolution up to 1080p 60Hz on HDMI output. If the player is set to a resolution the TV cannot support, picture will become abnormal.
Press the RESOLUTION button under STOP status to change the output resolution.
The player can also perform auto detection of supported TV resolution via EDID in order to avoid the setting of unsupported resolution.
7
Connections
Connecting to an AV Amplifier with Digital Audio Input or
Coaxial Optical
Digital Amplifier
Notes:
1. Select the Coaxial or Optical digital audio output.
2. Set the digital Amplifier to the AV input connected to the BD player.
8
FUNCTION OPERATION
OPEN/CLOSE
To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE again.
AUDIO
During BD, DVD playback, press AUDIO can select different audio language.
During VCD playback, press AUDIO button to switch between LEFT/RIGHT/STEREO channels.
SUBTITLE
Press the button to choose different captions(Requires support from disc).
RANDOM
During CD playback, press RANDOM button for random sequence playing.
MENU
During BD, DVD playback, press MENU to display the disc menu of the current title.
Note: This function is subject to the disc.
During VCD playback, press MENU to control PBC ON/OFF.
COLOUR( RED/GREEN/YELLOW/BLUE)
Use the buttons as indicated by the video display during BD-ROM disc playback.
DISPLAY
Press the button to show the information of the current playing disc.
A-B
During playback, press A-B to select point A, press it again to select point B. The player will repeat the section from A to B automatically. Press A-B a third time to cancel A-B repeat and clear points A and B.
Note: During CD/VCD playback, points A and B must be within the same track. During BD,
DVD playback, points A and B can be selected from different chapters.
ENTER
Press the button to confirm your choice on screen.
RETURN
When VCD disk playing, press RETURN button to return to Main menu (PBC ON only).
During BD/DVD playback, it acts like RESUME
SLOW
During BD, DVD, VCD or SVCD playback, press SLOW for slow motion playback. One you press SLOW, the disc will play at different speed. Press PLAY to resume normal playback.
9
FUNCTION OPERATION
NEXT
During BD, DVD,CD or VCD playback, press NEXT toplay the next chapter, title or track.
PREV
During BD, DVD, CD or VCD playback, press PREV to play the previous chapter, title or track.
Play
In pause state or stop state, press the button, the player will be in playing state.
MUTE
Press MUTE to turn off the audio, press MUTE again to resume normal sound.
Pause
In play state, press the button for the first time and the player will be in pause state.
STOP
Press the button once and the player will be in memory stop state. Continuously press this button twice and the player will be in complete stop state.
RESOLUTION
In the STOP/OPEN TRAY/NO DISC state, Press RESOLUTION key, you can select different output resolution for HDMI and component.
GOTO
During BD/DVD playback, press GOTO button to choose the desired title or chapter, and search the desired title time or chapter time.
During VCD playback, press GOTO button to search the desired disk time or track time, and choose the desired track.(only valid on PBC off)
During CD playback, press GOTO button to search desired track
STANDBY
Press the button to switch the power between normal work mode and standby mode.
ANGLE
Press ANGLE button to view the scene from different angles, this function is disc dependent.
Bonus View
Press Bonus View button to play the secondary video.
(Picture in picture mode, this function is disc dependent).
Secondary Subtitle
Press Secondary Subtitle button to choose subtitle language of the secondary video (this function is disc dependent).
Secondary Audio
Press Secondary Audio button to choose audio language for the secondary audio (this function is disc dependent).
10
FUNCTION OPERATION
POP MENU/TITLE
Press the button to enter the appointed title.(Requires disc support)
During BD playback, press the button to display the disc s popup menu.
REPEAT
Each press of the REPEAT button will change the repeat mode.
During VCD, CD playback, there are three modes: repeat Single, repeat ALL and Off.
During BD, DVD playback, there are three modes: Repeat Chapter, Repeat Title and OFF.
Note: During VCD playback, the PBC mode must be set to Off.
Direction key(UP/DOWN/RIGHT/LEFT)
Press the keys to move the highlighted bar or cursor on any menu to your selection.
SETUP
Press the button to enter the system setting menu. Press the button again to exit the menu.
STEP
Press STEP to step a single frame/ picture forward during playback. Press STEP several times to step several frames/ pictures forward. Press play to resume playback.
REV:
During BD, DVD, CD or VCD playback, press REV to scan in reverse. The player will review the disc at different times speed. Press PLAY/PAUSE to resume normal playback.
FW D disc at different speed. Press PLAY/PAUSE to resume normal playback.
VOLUME+/-
Press VOL+ to increase volume and press VOL- to decrease volume.
0-9 keys
These keys are used to input the time, as well as title, chapter and track numbers. When a numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and press ENTER to confirm. When a VCD is playing(with PBC off), press the 0-9 keys to select a track directly.
11
SYSTEM SETUP
BD Player Setup Menu
Press SETUP button on remote controller under STOP or TRAY OPEN status to enter Main menu. In Main menu, press UP/DOWN button to select desired sub-menus and press
ENTER button to switch to other sub-menus. In sub-menus, LEFT/RIGHT button are used to change options for desired items which will be highlighted.
A. Main setup menu for 2 channel player
Language Menu
Display Menu
Audio Menu
Parental Password Menu
Diagnostic Menu
EXIT
ENTER: switch menu item : make choice
B. Main setup menu for multi-channel player
Language Menu
Display Menu
Audio Menu
Parental Password Menu
Speaker Menu
Diagnostic Menu
EXIT
ENTER: switch menu item : make choice
1. LANGUAGE SETUP
Select Language in the setup menu, and display the Language submenu:
Language Menu
Audio Language Auto
Subtitle Language None
Menu Language Auto
OSD Language English
BACK To Index Menu
ENTER: switch menu item : make choice
1.1 Audio Language : Select default audio language for BD/DVD
1.2 Subtitle Language: Select default subtitle for BD/DVD.
12
SYSTEM SETUP
1.3 Menu Language: Select default menu language for BD/DVD.
1.4 OSD Language: Select your language for player OSD.
1.5 BACK: Return to main setup menu.
2. DISPLAY SETUP
Select Video in the setup menu, and display the Video submenu:
Display Menu
TV Type NTSC
TV Aspect 16:9
Resolution 1080i
Color Space xvYCC
Film Mode off
BACK To Index Menu
ENTER: switch menu item : make choice
2.1 TV Type: Select TV type.
2.2 TV Aspect:: Select display configuration for disc.
16:9: Content presented in 16:9 geometry for widescreen TVs.
4:3: Content presented in 4:3 geometry with horizontal black bars on top and bottom for conventional TVs.
4:3 Pan and Scan: Content cropped to fit within 4:3 geometry for conventional Tvs.
Note: Under HD(720P / 1080i / 1080P) mode, just 16:9 is available.
2.3 Resolution: Select desired resolution.
2.4 Color Space
User can select the best color space the TV supported for best color effect xvYCC: player implements a fallback algorithm in which the flow is xvYCC->YCC->RGB base on EDID information via HDMI
YCC: player implements a fallback algorithm in which the flow is YCC->RGB base on EDID information via HDMI
RGB: player will output video using RGB color space
Note: Color space setting only affects HDMI video output. Choose correct option here if you know the color space feature of TV, choose xvYCC option to let player decide for you. For some special case, e.g. the TV has wrong EDID information, please change color space to
RGB.
2.5 Film Mode
On: player will output disk content recorded at 24 frames per second directly
Off: player will convert 24frams/sec content to 1080p 60Hz output
Note: This item is only affect HDMI output, if no HDMI connect to player or TV do not support
1080p24Hz, it will be locked to “Off” option.
2.6 BACK: Return to main setup menu.
13
SYSTEM SETUP
3. Audio setup menu
A. For 2 channel player
Audio Menu
Digital Output PCM
PCM Downsampling 48KHz
Dynamic Range Control Off
BACK To Index Menu
ENTER: switch menu item
B. For multi-channel player
: make choice
ENTER: switch menu item : make choice
3.1Digital Output
Choose preferred option for digital output base on receiver connected to player
PCM: Output PCM audio data for receiver not support Dolby and DTS decoding (mixed primary audio, secondary audio and effect audio if available in disk)
Bitstream: Output raw data for receiver support Dolby and DTS decoding (primary audio only).
Re-encoded DTS: Output DTS data format for receiver if it support DTS decoding (mixed p rimary audio, secondary audio and effect audio if available in disk)
Note: Not setting this item properly may result in noise.
Dolby Digital, Dolby Digital Plus, Dolby Digital True HD
DTS and DTS HD
Audio Menu
Digital Output PCM
PCM Downsampling 48KHz
Dynamic Range Control Off
Bass Crossover Freq Off
BACK To Index Menu
14
SYSTEM SETUP
3.2 PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as some SPDIF receivers do not support 192 kHz or even 96 kHz).
48 kHz: Downsample audio with sample rates over 48 kHz.
96 kHz: Downsample audio with sample rates over 96 kHz.
Off : No downsampling on SPDIF output.
3.3 Dynamic Range Control: Reduces loudness difference between soft and loud parts of the audio track.
On: Enables dynamic range control for all codecs.
Follow: Enables dynamic range control for all codecs. MLP streams use the
DRC level embedded in the audio stream itself.
Off: Turns off dynamic range control.
3.4 Bass Crossover Freq(only for multi-channel player)
Use this item to indicate BD player your Subwoofer's frequency response (off / 80Hz /
100Hz / 120Hz)
3.5 BACK: Return to main setup menu.
4. Parental control menu:
Please Input 4-Digital parental password
ENTER: switch menu item : make choice
Enter right password to enter parental control menu.
Parental Menu
Parental Country USA
Parental Control Off
Parental Level 1.
Kid Safe
Parental Password Default
BACK To Index Menu
ENTER: switch menu item : make choice
Note: Factory default password is 6666.
15
SYSTEM SETUP
4.1 Parental Country: Select the movie intended for your residential area.
USA: Parental country set to USA.
International: Parental country set to others
4.2 Parental Control: Activate parental control.
Off: Turn off parental control.
On: Turn on parental control.
4.3 Parental Level Select parental control level, disc cannot be played if preset level on disc exceeds the level user set.
1.Kid Safe
2.G
3.PG
4.PG-13
5.PG-R
6.R
7.NC-17
8.Adult
4.4 Parental Password: Set parental password.
Default: Reset to default password
User Define: Setup user define password
User defined password setting for parental control.
Please set 4-Digital Parental password: ----
ENTER: switch menu item : make choice
4.5 BACK
Select this item, then press ENTER to return to main setup menu.
5.Speaker Menu(only for multi-channel player)
Set this menu properly for analog audio output.
If there are only 2 speakers, just keep Front L-R as “large”, set others to “Off”
If there are more speakers connected through amplifier, Front L-R set to “Large”, others you can set to “Large” or “Small”, and turn Subwoofer to “On”. Only when the source content with 5.1CH or 7.1CH audio stream, player can output 5.1CH or 7.1
CH analog audio
16
SYSTEM SETUP
Speaker Menu
Front L-R Large
Center Large
Surround L-R Large
Rear L-R Large
Subwoofer On
BACK To Index Menu
ENTER: switch menu item : make choice
Reload Default Setting? (Okay/Canel) OKAY
Erase nonvolatile storage OKAY
ENTER: switch menu item : make choice
Use UP/DOWN to select item, than use LEFT/RIGHT key to change option (OKAY or Cancel).
Reload Default Setting? (Okay/Canel)
Loading factory default setting for all items in setup menu
Erase nonvolatile storage
Erase storage partition function base on BD-J requirement
7.File Disk Playback ----- WMA/MP3/JPEG(WMJ) files in disk
After read out the device with WMJ files, player will list all directories and files in root directory as below picture shown. Press TITLE key to bring out help messages, press MENU key to bring up a pop up menu which guide you for special features, press LEFT button to exit pop up menu, press NAVIGATION buttons on remote controller to select desired item for playback or enter next level directory.
17
SYSTEM SETUP
For music files, in pop up menu, user can add current file into playlist as favorite songs, and set current file as background music while JPEG slide show.
Play
Add Play List
Set As BGM
For Playlist operation, in pop up menu, user can set play mode, audio mode, and remove songs which have been added into playlist.
Play
Set Play Mode
Set Audio Mode
Play list
For JPEG files, in pop up menu, user can choose to play current JPEG or slide show
JPEG files
Play
Start Slide Show
Properties
For single JPEG file playback, user can change to slide show mode with different transition effects, rotate current picture or choose “Properties” to see detail file
information.
Start Slide Show
Rotate
Properties
For JPEG slide show operation, user can set time interval or transition effects for
JPEG slide show and enable background music playback while JPEG slide show.
Start Slide Show
Slide Show Duration
Slide Show BGM
Blend
Film
Shutter
Fade
Curtain
None
18
Ensure you have entered the correct AV input for your TV.
enter
Make sure the Main unit’s POWER button is on.
19
Specifications
Power requirements: AC 100-240 Volt, 50/60Hz
Power consumption: 35W
Unit Weight: 2.5kg
Discs COMPATIBILITY:
BD,DVD,DVD+/-R/RW,VCD,CD-DA,CD-R/RW.
Video out
Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin jack x 1
Audio out
2 channel out: RCA pin jackx2
7.1 channel out: RCA pin jackX8 (optional)
Coaxial out: 0.5V(p-p)75 , RCA pin Jack x l
Frequency response: 20Hz to 20kHz
S/N ratio:>90dB
Total harmonic distortion: <-65dB
[Accessories]
Video/ Audio cable x 1
Remote Control x 1
User s Manual x 1
Battery x 2
Specifications are subject to change without notice.
Weight and dimensions are approximate.
20
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project