Audiovox NAV101 - NAV 101 - Navigation System Owner`s manual

VME 9309TS
Thank you for choosing a Audiovox product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few
minutes to look through it, you’ll learn how to use all the features of your new Audiovox VME 9309TS Mobile Multimedia Receiver for maximum
enjoyment.
Preparation
3
Optional Equipment
4
Warning
4
Installation
5
Wiring Diagram
7
Controls and Indicators
8
Remote Control
10
Using the TFT Monitor
13
Operating Instructions
15
Setup Menu
16
Tuner Operation
20
DVD/VCD Video Operation
23
DVD/CD Audio Operation
29
MP3/USB/WMA/Operation
31
Troubleshooting
32
Care and Maintenance
34
Specifications
35
Subject to technical changes
Warranty Card
2
PREPARATION
Congratulations on your purchase of the Audiovox VME 9309TS Mobile Multimedia Receiver.
It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Audiovox VME 9309TS installed by
a reputable installation shop.
Features
DVD
• Aspect Ratio - Cinema, Normal and OFF (Standby)
• Fast Forward, Fast Reverse - 2X, 4X, 8x and 32X
• Slow Forward, Slow Reverse - 2X, 4X, 8x and 32X
• Play, Pause, Stop, Next Chapter and Previous Chapter
CD / MP3 / WMA
• CD-Text Compatible
• ID3 Tag Compatible
• Directory Search (MP3 / WMA Only)
• Direct Track Access via Remote control
• Burn Up To 1500 MP3 and WMA Files onto a DVD+R /RW
• Audible Forward / Reverse Track Search
• Random, Repeat and Intro
• Play, Pause, Stop, Next Track and Previous Track
AM-FM-RDS
• USA/Europe/Latin America/Asia Frequency Spacing
• 30 Station Presets (18 FM, 12 AM)
• Auto Stereo/Mono
• Local/Distance
• Auto Store/Preview Scan
• RDS (Radio Data System)
Chassis
• 1.0 DIN (Import / ISO-DIN Mountable)
• Motorized Flip-Out / Flip-Up LCD Screen
• 8 Character / Segment Type Secondary LCD Display
• 7" TFT Active Matrix LCD w/ Anti-Glare Coating
• 336,960 Sub Pixels (1440W X 234H)
• Pixel Pitch - 0.321W X 0.370H
• Screen Tilt
• Beep Tone Confirmation (On-OFF Option)
• Heat Management System - Forced Air Cooling to keep the chip sets operating at nominal temperatures
• USB 1.0 (500 mA max.)
Subject to technical changes
General
• Navigation Ready (NAV101 or NAV102)
• 44-Key Infrared Remote Control
• One Composite Video Output for Additional Screens
• One Audio / Video Auxiliary Input for Game Console, Camcorder, Navigation, etc.
• Three-Band Tone control (Bass, Mid and Treble) w/ seven Preset EQ Curves
• Front, Rear and Subwoofer Line Output
• Subwoofer Phase Control - 0 ~ 180 degrees
• Programmable Volume Control
• Rear Camera Input (Normal and Mirror Image View)
• Touch Screen Calibration Mode
• 100-Ohm Preamp Line Output - All Audio Channels
• 2VRMS Line Output - All Channels
• Rotary Encoder Audio Control
3
Optional Equipment
• NAV101/NAV102
The VME 9309TS is "navigation ready." Before accessing any navigation features, you must purchase and install the NAV module. All installation
and operating instructions will be included with the NAV navigation module. Once the NAV is connected and operating properly, the NAV source
mode will become active. While the NAV is not installed, the NAV option appears gray, indicating the function is not available.
• Rear Camera
The VME 9309TS is "camera ready." Before accessing any camera features, you must purchase and install a rear video camera. Once the rear camera is connected and operating properly, the CAMERA source mode will become active. While the camera is not installed, the CAMERA option
appears gray, indicating the function is not available.
Tools and Supplies
You will need these tools and supplies to install your VME 9309TS:
• Torx type, flat-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation.
NOTE:
If the VME 9309TS is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the
cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short
circuit.
WARNING! Only connect the unit to a12-volt power supply with proper grounding.
WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while
driving the vehicle. This is a violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water.
WARNING! Never use irregular discs.
WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.
WARNING! Using an improper fuse may cause damage to the unit and result in a fire.
Subject to technical changes
WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or
swivel the monitor manually.
4
INSTALLATION
Pre-installation
1. Press the metal levers on both sides to remove the halfsleeve from the radio.
2. Install the half-sleeve.
a. Install adapter if necessary (optional).
b. Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.
c. Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard
opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.
d. Install support strap to make the unit more stable.
CAUTION! Be careful not to damage the car wiring.
3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.
Wiring
Complete wiring as illustrated in the wiring diagram on page 8. Once the wiring is complete, reconnect the battery negative terminal. If there is no
ACC available, connect the ACC lead to the power supply with a switch.
NOTE:
When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The VME 9309TS uses one 15 amp mini-ATM fuse,
located in the black filter box in-line with the main wire harness.
1. Connect wiring adapter to existing wiring harness.
2. Connect antenna lead.
3. Carefully slide the radio into the half-sleeve, making sure it is right-side-up, until it is fully seated and the spring clips lock it into place.
5
Subject to technical changes
Final Installation
After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not operate, recheck all wiring
until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.
NOTE:
For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation.
4. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten
the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided.
Bend the strap to position it as necessary.
CAUTION! The rear of the radio must be supported witht he strap to prevent damage to the dashboard from the weight of the radio or improper
operation due to vibration.
5. Replace any items you removed from the dashboard.
Subject to technical changes
Final ISO-DIN Installation
1. Remove trim ring.
2. Mount factory brackets on new radio using existing screws from old radio.
3. Slide radio chassis into dash opening and secure.
4. Reinstall dash panel.
6
Subject to technical changes
Wiring Diagram
7
CONTROLS AND INDICATORS
Button Operation
1. OPEN/CLOSE
Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT.
2.
WIDE/NAV/DISP
When the monitor is retracted the station search function is started in the direction of lower frequencies by pressing button . If button is pres-
sed briefly when the monitor is extended, the image switches between Full and Standby mode for the monitor. If button is pressed and held, the
optionally available navigation module appears and the audio stream from the previously selected source keeps playing in the background. The
touch screen operation for the navigation interface is inactive in this "MIX" mode. In order to be able to execute TS settings you will need to switch
off the "MIX" mode by pressing and holding button again.
3.
/ TILT
When the monitor is retracted the station search function is started in the direction of higher frequencies by pressing .
Pressing the TILT button when the monitor is extended activates the angular adjustment function of the monitor, which can be adapted to requirements by using the volume controller.
4. BAND/PIC
When the monitor is retracted you can switch between FM 1/2/3 and AM1/2 by pressing the BAND button.
When the monitor is extended the brightness and contrast settings can be adjusted by pressing the PIC button.
5. AUDIO/LO/DX
Rotate to adjust the volume. Press and release to enter and/ or confirm audio settings. Press and hold to activate the Local (LOC) setting.
6. SRC
Briefly pressing the SRC button switches on the device. The device is switched off by pressing and holding the SRC button. Briefly pressing the
SRC button while the device is switched on and the monitor is retracted activates the source selection function, which appears on the small
display. Press this button again repeatedly to alternate between the various sources. The source indicated on the display is selected after 3 seconds.
Pressing the SRC button when the monitor is extended displays the source selection menu on the screen, where you are then able to make your
selection via the touch screen function.
7. LCD Display
8. FRONT AV INPUT
The front audio/video input function can be selected via the source selection menu (AUX1).
You can connect portable media devices to this input. For details of the connector assignment please refer to page 9.
9. IR Remote Control Receiver
10. RESET
Press to reset system settings to factory default (except the password and parental lock setting).
11. (
)
Press once for disc insertion/ejection.Press and hold to reset core mechanism position.
12. TFT Display
13. USB connection
Front USB input including "slidable" cover. The USB input can accommodate standard USB media devices that do not exceed a maximum amperage of 500 mA. Audio and video formats can be played back via this input.
Connectable media include e.g. MP3 players, USB sticks and cameras (provided that these cameras save images in JPEG format).
Subject to technical changes
14. DISP
In the CD/DVD mode the DISP (Display) button activates the upper status line which includes additional information relating to the disc, such as the
track number and running time.
8
9
Subject to technical changes
REMOTE CONTROL
Subject to technical changes
NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only.
10
11
31
32
33
34
35
30
29
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
10
1
2
3
4
5
6
7
8
9
Ref. No.
Subject to technical changes
CLEAR
SETUP
SEL
RDM
SCN
EJECT
DISP
PRESET
PRESET
ANGLE
FFW
VOL VOL +
Track back
Enter
Track forward
BAND
GOTO
Rewind
ZOOM
PIC
OPEN/CLOSE
TILT
TILT
WIDE
1,2,3,4,5,6,7,
8,9,0
(Number pad)
MENU
TITLE
MUTE
POWER
AUDIO
REPT A-B
REPT
SRC
SUBTITLE
Name:
Eject disc
Delete entrys or leave to avoid errors
Display SETUP menu
Open EQ menu
Playback all chapter in random order
Fast forward
Decrease volumen
Increase volumen
Track back
Start/ Stop playback/ Enter
Track forward
Stop playback
Activate direct access mode
Fast rewind
Zoom IN/ OUT
Brightness and Contrast adjustment
TFT Monitor IN/ OUT
Monitor angle decreasement
Monitor angle increasement
Picture: CINEMA,NORMAL or Stand By
Jump directly to choosen chapter
DVD
Open Route Menu Disc
Open Title Menu Disc
Mute audio signal
Power the unit ON/ OFF
Change Audio language of disc playback
Repeat from time frame A to B
Repeat of the current chapter
Select Source
Select subtitle language
Show playback information/
Clear entry in direct access mode
Enlarge picture at DVD/DivX or Picture
Reduce picture at DVD/DivX or Picture
Eject disc
Delete entrys or leave to avoid
errors
Display SETUP menu
Open EQ menu
Brightness and Contrast adjustment
TFT Monitor IN/ OUT
Monitor angle decreasement
Monitor angle increasement
Eject disc
Delete entrys or leave to avoid errors
Display SETUP menu
Open EQ menu
Brightness and Contrast adjustment
TFT Monitor IN/ OUT
Monitor angle decreasement
Monitor angle increasement
Decrease volumen
Increase volumen
Select Source
Select Source
Decrease volumen
Increase volumen
Mute audio signal
Power the unit ON/ OFF
TUNER
Mute audio signal
Power the unit ON/ OFF
VCD
Eject disc
Delete entrys or leave to avoid errors
Display SETUP menu
Open EQ menu
Brightness and Contrast adjustment
TFT Monitor IN/ OUT
Monitor angle decreasement
Monitor angle increasement
Decrease volumen
Increase volumen
Select Source
Mute audio signal
Power the unit ON/ OFF
CD/MP3
Eject disc
Delete entrys or leave to avoid errors
Display SETUP menu
Open EQ menu
Playback all tracks in random order
Brightness and Contrast adjustment
TFT Monitor IN/ OUT
Monitor angle decreasement
Monitor angle increasement
Picture: Cinema or Standby
Direct access to selected track
Update title list page down
Update title list page up
Decrease volumen
Increase volumen
Select previous track for playback
Start/ Pause playback
Select next track for playback
Stop playback
Repeat Single/ Folder/ Off
Select Source
Mute audio signal
Power the unit ON/ OFF
USB
USING THE TFT MONITOR
Open/Close TFT Monitor
Open TFT Monitor
Press the OPEN button (1) on the front panel or press the (
panel into the viewing position.
) button (25) on the remote control to activate the mechanism that moves the display
Close TFT Monitor
Press the OPEN button (1) on the front panel or press the (
ment.
) button (25) on the remote control to load the display panel back into the compart-
TFT Monitor Auto Open
If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically moves to the viewing position.
If “TFT Auto Open” is ”off” when the unit is turned on, press the OPEN button (1) or ( ) button (25) on the remote
control to move the monitor into the viewing position.
If “TFT Auto Open” is set to ”Manual”, the TFT will not close when the key is turned off.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the display in relationship to the viewing angle. The monitor angle can be adjusted for optimum viewing using one of the following methods:
Press the Tilt buttom to activate the Tilt function (a yellow symbol appear at the right top corner of the screen).
Step by Step Angle Adjustment
v
Press the ^
^ or v button on the remote control to adjust the tilt angle of the screen one step at a time.
Continuous Angle Adjustment
v
Press and hold the ^
^ or v button on the remote control to adjust the tilt angle in a continuous motion.
The angle adjustment can be adjusted by the right joystick up and down.
Aspect Ratio
Press the WIDE button (28) on the remote control or WIDE/NAV button (2) on the monitor to adjust the aspect ratio as
follows:
FULL
The entire screen is extended horizontally to the aspect ratio of
16 to 9. The extension ratio is the same at any point.
NORMAL
The conventional display image has a 4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and left sides of the display.
Subject to technical changes
STANDBY
Screen becomes black. Touch screen to resume.
12
Parameter Adjustment Procedure
1. Enter Picture Quality Setting Mode:
Press the PIC button (24) on the remote control or the BAND/PC button (4) on the monitor.
2. Select Item to Set:
Press the AUDIO button (5) on the control panel to select “BRIGHT” or “CONTRAST”.
3. Set Parameters:
Press the +/– buttons (15, 16) on the remote or turn the rotary encoder (5) on the control panel.
4. Exit Picture Quality Setting Mode:
Press the PIC button (24) on the remote control or the BAND/PIC button (4) on the monitor
Table 2: Video Output Modes
Playing Source
Video Output Modes
AM/FM TUNER
RGB Mode
DISC
RGB Mode
AUX 1 + 2
CVBS Mode
NAV
RGB Mode
CAMERA
CVBS Mode
* CVBS - Composite Video Baseband Signal
Parking Brake Inhibit
• When the “PRK SW” cable is connected to the brake switch, the display on the TFT monitor will display video only when the vehicle is applied.
• Parking brake function is overridden when the video source is set to CAMERA.
• When the parking brake inhibit is active, the front monitor displays “Parking Is On”, preventing the driver from watching content while driving.
Rear video screens are not affected.
Mute
Press the MUTE button on the front panel (6) or remote control (3) to mute the volume from the unit. Press the MUTE button again to restore the
volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute function. External peripheral devices can be connected to this unit via RCA output or MediaLink. Select “AUX” mode to access and control connected auxiliary devices.
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or
monitor:
After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnecting the
power.
Obstruction
Self Protection
OPEN Button Pressed
Monitor loading out horizontally Unit stops at obstruction point Monitor fully extended
horizontally
Monitor loading in horizontally
Unit stops at obstruction point Monitor fully extended
horizontally
Power Reconnected
Monitor is automatically loaded into unit
Monitor is automatically loaded into unit
Monitor loading out horizontally Unit stops at obstruction point Monitor swivels back to the unit Monitor swivels back to the unit
Monitor loading in horizontally
Unit stops at obstruction point Monitor swivels back to the unit Monitor swivels back to the unit
Subject to technical changes
Table 3: Monitor Protective Measures
13
OPERATING INSTRUCTIONS
Power On / Off
Press the /SRC button (6) on the unit (or the / POWER button (4) on the remote control) to turn the unit on. The buttons on the front of the unit
light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the OPEN button (1) and opening the TFT
screen.
Press and hold the
button to power off the unit.The monitor is drawn back into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.
Playing Source Selection
Press the SRC button (6) on the front panel or the SRC button (8) on the remote to change between available playing sources in the following order:
AM/FM/RDS, DISC, AUX1, AUX2 and CAMERA (Navigation can be selected if connected). The playing mode is displayed on the TFT and LCD
screens.
Volume Adjustment
To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOL buttons (15, 16) on the remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from “0”
to “40”. The LCD or TFT screen displays the volume level for 3 seconds.
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Press the AUDIO
button (5) on the front panel once to display the audio menu. To adjust an audio feature:
Function
Adjustment option
EQ
User
Rock
Hip Hop
Dance
Latin
Rave Urban Acoustic
FAD-BAL
By push at the gridfield you can adjust the Fader/Balance accordingly.
Adjustment of Bass/Mid/Treble seperately available
By push at the “EQ”-field you can choose between the pre adjusted EQ´s
NOTE: The EQ mode will automatically change to “USER” when individual EQ bands are adjusted.
The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen or press and hold the
AUDIO button (5).
System Reset
To correct a system halt or other illegal operation, use the tip of a pen to press the reset button
(10 ) located on the front bottom-right corner of the unit. After a system reset, the unit restores all
factory default settings.
Line Mute
If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone or when verbal navigation is performed.
14
Subject to technical changes
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete.
SETUP MENU
To access system settings, press the SETUP button (31) on the remote control or touch the button
The “GENERAL” sub-menu appears highlighted in blue.
on the screen to enter the “SETUP” menu.
Accessing Menu Items
Touch the sub-menu name to select a sub-menu (Language, Audio, RDS, etc.).
The features available for adjustment under the highlighted sub-menu option will appear in the center of the screen.
Adjusting a Feature
Subject to technical changes
1. Use the touchscreen or press the /\ or V buttons (14, 22) on the remote control to select the feature to be adjusted.
2. Enter the option field for the feature you want to adjust by using the touchscreen or pressing the >/|| button (18) on
the remote. A submenu appears in a second row with the selected option highlighted in blue.
3. Select a new value by using the touchscreen or pressing the >> or << buttons (14, 22) on the
remote control.
4. Use the touchscreen or press the >/|| button (18) on the remote control to confirm setup.
15
Subject to technical changes
General Sub Menu Features
16
Language Sub-menu Features
If a DVD supports more than 1 Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is
not supported by the DVD, then the default language is used.
Setting
Options
Function
RDS
On
Unit will display Radio Data System
information when available.
Off
TA/Vol
On
Off
Clock timesupported by RDS
Manual Clocktime adjustment
Volumen increasement for traffic
announcements.
17
Subject to technical changes
CT
Rating Sub-menu Features
The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating
system is unlocked. Once setup, the parental lock is released only by entering the correct password. Once the password is entered, rating is
available for setup.
The default password is 0000.
Setting
Options
Function
Password
Rating
Load Factory
Enter a 4-digit password to activate the “Rating” feature.
1.
2.
3.
4.
5.
6.
7.
8.
Kid Safe
G
PG
PG-13
PG-R
R
NC-17
Adult
Reset
Select the apprpriate rating level for the intended audience.
You may override higher ratings by using your password.
Select “Reset” to restore the
To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the
“Password” field and enter a new one.
NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is
unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please
refer to the disc description.
Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves
into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is
retracted back inside unit.
Setting
Camera In
Options
TFT Auto Open
On
Off
Manual
Function
Normal
Mirror
The TFT panel automatically opens when the unit is turned on.
You must press the OPEN button (1) to open the TFT panel.
When the ignition is turned OFF, the TFT panel DOES NOT retract if it was previously out.
If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the
monitor return to its original input mode.
P.VOL Sub-menu Features
Setting
Options
Function
Source
DISC
RADIO
AUX 1
AUX 2
NAV
Choose a sourcefor which you would like
to increase the relative volume (LEVEL).
Use the +/- buttons to increase relative
volume for specified source up to 6 decibels.
USB
TS Cal (Screen Calibration)
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the SETUP button (31) on the remote control or touch the BACK button on the screen.
18
Subject to technical changes
To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option.
After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one
second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed.
1. Current radio band indicator
2. Radio frequency indicator
3. Clock
4. Stereo broadcasting indicator
5. Strong Local signal broadcasting indicator
6. Preset radio stations: Touch to recall preset stations
7. RDS Information: PS (Program Service), PTY (Program Type), RT (Radio Text)
8. Touch for quick access to Equalizer level settings
9. Touch to access the direct entry screen
10. Current preset station indicator
11. |<<: Touch to seek backward
12. >>|: Touch to seek forward
13. v
v Touch to tune backward one step
14. ^ Touch to tune forward one step
^
15. BAND: Touch to change between AM/FM bands
16. AS: Touch to automatically store stations
17. Touch to view the SOURCE MENU and select a new playback source
18. MEM: View screen used to enter current channel into preset memory
19. 1/2 or 2/2: Touch this page button to view a second page of on-screen buttons
20. :
Touch to view the SETUP menu
21. PS (Preview Scan): Touch to scan all stations available, stopping for 5 seconds at each and continuing until a
station is selected
22. LOC: Touch to tune to strong local stations
23. PTY: When PTY is pressed, the Program Type categories are listed, allowing listeners to find similar
programing by genre. When a PTY category is selected from the touch screen menu, the radio will start scanning
for the selected category.
24. Indicates the PTY function is activated
25. Indicates the RDS function is activated
26. TA: (Traffic Announcement) indicator
27. TP: (Traffice Program) indicator
28. Broadcaster information stored at the preset
19
Subject to technical changes
TUNER OPERATION
Tuner TFT Display
Switch to Radio Tuner source
• Touch the top left corner of the screen (the RADIO circle) to view the SOURCE MENU. Touch “Radio”.
• Press the SRC button (6) on the front panel or remote control (8) to switch to the AM/FM or RADIO source.
Select FM/AM Band
Touch the BAND button (15) on the screen, or press the BAND button on the unit (4) or remote control (20) to change between the following
bands: FM1, FM2, FM3, AM1, and AM2
NOTE: The BAND button on the unit only works when the TFT is closed.
Seek Tuning
To seek the next higher station:
• Touch the >>| button on screen.
• Press the >>| button (19) on remote control.
To seek the next lower station:
• Touch the |<<| button on screen.
• Press the |<< button (17) on the remote control.
Manual Tuning
To increase or decrease the tuning frequency one step:
v
• Touch the ^
^ or v buttons on screen.
• Press the >> or << buttons (14, 22)on the remote control.
Direct Tuning
To enter a radio station directly, touch the
button.
Enter the desired radio station using the on-screen numberpad. Press the enter button (arrow) to tune to the selected
station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear.
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current
band appear on the screen.
Storing a Station
Subject to technical changes
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (18) to open the preset screen.
3. Touch the preset number in which you would like to store the current station (or press EXIT to cancel
and close the menu). The preset number and station appears highlighted.
20
Recalling and Storing broadcaster using the presets and the Automatic Storing ( AS) Function:
Recalling a Station
1. Select a band (if needed)
2. Touch an on-screen button (P1- P6) to select the corresponding stored station.
Manual Storing of a Station
1.
2.
3.
4.
Please manual tune to the desired broadcaster (Frequency)
Push the MEM on-screen button and then select the desired preset (P1- P6)
The broadcaster will be stored at the selected one
Instead of the frequency the Program Service ID (i.e. BBC) will be stored
Automatic Storing (AS) of the strongest Stations
1.
2.
3.
4.
Push the Automatic Storing (AS) on-screen button for 2 seconds
The VME start scanning the available broadcasters (which take a while)
Once scanning is finished the 6 strongest ones will be stored at P1- P6
During Automatic Storing (AS) only the frequencys will be stored at P1- P6 to
decrease the scanning/ storing time
5. If you now manually select P1- P6, then the PS information will be finally stored
for the selected preset (i.e. P2: BBC)
Radio Text message bar
1. The Radio Text (RT) information is a part of the RDS signal which is supplied by
the broadcaster. This information will be shown at the lower bar (i.e. ABCD)
2. Not all broadcaster support this additional information or all the time
Preview Scan (PS)
To scan the AM or FM band for a preview of available stations in your particular area, touch the 1/2 button to access the second screen of menu
options touch the PS button (21). Touch again to stop preview scan.
Local Radio Station Seeking (LOC)
Subject to technical changes
When the Local function is on, only radio stations with a strong local radio signal are played. To activate the Local function in AM/FM tuner mode,
touch the 1/2 button to access the second screen of menu options, and then touch the onscreen LOC button. Touch the LOC button again to turn
Local off. When the Local function is active, the LOC indicator at the top of the screen is illuminated.
21
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play
a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the OPEN button (1). The unit beeps and then opens.
Closing the TFT Screen
Press the OPEN button (1) again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing.
Insert/Eject Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “General Sub-menu Features” on page 24 ) .
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.
Ejecting a Disc
Press the
button (11) on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the
to reset the loading mechanism. Normal operation resumes.
button (11) on the unit or remote control (35)
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the SRC button (6) on the front panel or remote
control (8) until “DISC” appears at the bottom of the screen.
Controlling Playback
Subject to technical changes
To access the on-screen controls, touch the screen. Touch the 1/2 button to view a second page of controls.
22
Stopping Playback
Touch the stop button () on the screen or press the / BAND button (20) on the remote control to stop DVD play.
Pausing Playback
Touch the pause button (||) on the screen (or press the >/|| button on the remote control) to suspend disc playback. Press the > button on the screen
to resume disc playback.
Slow Motion Playback
Press the << button (22) on the remote control or the << button on the screen to play the current title in slow motion. Keep pressing and releasing
the button to increase the rate from “2X” to “4X”, “8X”, and “20X”. Press >/|| (18) on the remote control or touch the onscreen play button (>) to
resume normal play.
Fast Forward Playback
Press the >> button (14) on the remote control or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase
the rate from “2X” to “4X”, “8X”, and “20X”.
Press >/|| (18) on the remote control or touch the onscreen play button (>) to resume normal play.
Repeat Playback
Press the REPT button (7) on the remote control or the
following:
• DVD: Repeat Chapter, Repeat TItle, Repeat Off
• VCD (PBC Off): Repeat Single, Repeat Off
button on screen to alter repeat mode according to the
NOTE: For VCD play, the repeat function is not available if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
• Press the RPT A-B button (6) on the remote control (or the A-B button on screen) to set the start point (A) of the
repeated section.
• Press the RPT A-B button again once you reach the
desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously.
• Press the RPT A-B button again to cancel the A-B section setting and stop repeat play.
NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off.
Random Playback
With a DVD, VCD, or CD playing, press the RDM button (33) on the remote control to activate random playback and play all chapters/tracks in
random order. “On” appears on the screen. Press the >>| button (19) on the remote control to play the next random track.
Press the RDM button again to turn random play off.
Subject to technical changes
NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off.
23
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the main DVD menu.
Press the TITLE button (2) on the remote control or on screen to select a different title for playback.
Press the >/|| button (18) on the remote control to confirm your selection and begin playback. You can also select a title using the touch screen.
Moving Through Chapters
Press the >>| button (19) on the remote control or the >>| button on screen to advance to the next chapter on the DVD. Press the |<< button (17)
on the remote control or the |<< button on screen to move to the previous chapter.
Goto Search
During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc:
1. Press the GOTO button (21) on remote control to enter “GO TO” mode.
2. Press the >> or << buttons (14, 22) on the remote control to select a category (highlighted in blue).
• For DVD mode, you can choose Time or Title/ Chapter search.
• For VCD mode, press the GOTO button to choose between Track Search, Disc Search and Exit.
VCD Track Search
DVD Search
Time – Go to specific time in current title
Title/Chapter – Go to specific time in a chapter
Time – Go to specific time in the current track
Track – Go to specific track
VCD Disc Search
Time – Go to specific time on disc
Track – Go to specific track
Direct Chapter / Track Selection
Remote Control Direct Entry
During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly.
3. Enter a time into the field using the numeric keypad (29) on the remote control.
4. Press the >/|| button (18) on the remote control to go to the specified location on the disc.
Subject to technical changes
5. Press the GOTO button again to exit.
24
Touch Screen Direct Entry
To select a chapter/track directly, touch the button
on screen control to display the direct entry menu.
• Title (Titel): _/#
• Chapter (Kapitel): _ _/##
• Time (Zeit): _ _:_ _:_ _
Enter the desired chapter/track using the on-screen number pad. Press the enter button (arrow) to tune to the selected station. To exit the screen
without changing the station, touch Exit. To clear your entry and start over, touch Clear.
Viewing an Alternate Picture Angle (DVD Only)
Some DVDs contain scenes that have been shot simultaneously from different angles. For discs recorded with
multiple angles, press the ANGLE button (13) on the remote control to toggle available angles of the on-screen image.
Zooming
Press the ZOOM button (23) on the remote control to enlarge and pan through the video image using the following options: “Q1”, “Q2”, “Q3”, and
“OFF”.
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages, press the AUDIO button (5) on the
remote control to choose a language.
Changing Subtitle Language
Subject to technical changes
If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the
language in which you would like the subtitles to appear.
25
NOTE: During VCD playback, press the AUDIO button (5) on the remote control to choose between Left Channel, Right Channel, and Stereo.
PBC (Play Back Control - VCD Only)
For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback.
Press the MENU button (1) on the remote control to toggle the PBC function “On”/”Off”. Once PBC is on, playback starts from track one of the
play list.
NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. Repeat and direct track selection are not available.
When PBC is activated, selecting random, scan, or search playback automatically deactivates PBC.
Playback Information
During DVD and VCD playback, press the DISP button on the control panel (14) or remote control (10) to display playback information on the screen,
including the media playing and current playback time.
DVD Playback Information
The following information is displayed at the top of the screen during DVD playback:
• Title: 05/08 – “05/08" indicates the fifth of 8 titles on the DVD is currently playing.
• C : 2/16 – “2 / 16" indicates that the second of 16 titles on the DVD is currently playing.
00:41:28 – “00:41:28” indicates the playback time of the current title.
•
2 / 6 Eng – The language display information indicates the second language out of 6 (English) is currently
being used.
VCD Playback Information
The following information is displayed at the top of the screen during VCD playback:
• VCD2.0 – Format of current disc.
• T: 6/18 – “6/18” indicates the sixth of 18 tracks on the VCD is currently playing.
Subject to technical changes
00:02:18 – “00:02:18” indicates the playback time of the current track.
26
Subject to technical changes
Regional Coding:Both the DVD-Player and discs are
coded by region. These region codes must match in
order for the disc to play. If the codes do not match,
the disc won’t play. This unit’s code is 2. DVD’s with
other region codes cannot be played in this unit.
27
DVD/CD AUDIO OPERATION
Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VME 9309TS will play music or other audio files from the following disc media:
• CD-DA
• CD-R/RW
• DVD
• DVD+R/RW
• DVD-R/RW
Upon inserting a disc with the TFT screen open, the disc and track title (if available), along with the track number and playing time appear on the
screen.
CD Player User Interface
The on-screen indicators and touch key areas for CD playback are outlined below.
Subject to technical changes
1. Current track and total number of tracks on disc
2. Elapsed playing time
3. Current time
4. Track titles
5. Disc title
6. Touch to play/pause disc playback
7. Touch to stop disc playback
8. >>|: Touch to move to next track
9. |<<: Touch to move to previous track
10. >>: Touch to fast forward current track
11. <<: Touch to rewind current track
12. Touch to activate/deactivate Repeat play mode
13. Touch to open sub page
14. Touch to access the direct entry screen
15.
: Touch to view the SETUP menu
16. Touch for quick access to Equalizer level settings
17. Touch to view the SOURCE MENU and select a new playback source
18. Touch and slide to show next track or page
25. Clock time
28
Controlling Playback
Stopping Playback
Touch thebutton on screen or press the/BAND button (20) on the remote control to stop disc play.
To resume playback, touch thebutton on screen or press the >/|| button on the remote control (18).
Pausing Playback
Touch the button on screen to suspend or resume disc playback.
Moving Through Tracks
Press the >>| button (19) on the remote control or on screen to advance to the next track on the disc. Press the |<< button (17) on the remote
control or on screen to move to the previous track.
Repeat Playback
Touch the
•
•
•
•
button on screen, press the RPT button on the remote control (7) to alter repeat mode according to the following:
DVD: Repeat Chapter, Repeat Title, Repeat Off
CD-DA: Repeat One, Repeat All, Repeat Off
CD-R/RW: Repeat One, Repeat All, Repeat Off
DVD-R/RW: Repeat One, Repeat All, Repeat Off
Track Scan Select (CD-DA discs only)
During disc play, press the SCN button on the remote control (34) to play the first 10 seconds of each track. When a desired track is reached,
press the SCN button again to cancel the function and play the selected track.
Random Play Select
While disc play is stopped, press the RDM button on the remote control (33) to play the tracks on the disc in a random, shuffled order. Touch
the RDM button again to cancel Random Play mode.
NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
Fast Forward/Fast Rewind
Touch the button on screen >> to fast forward and the button << to fast rewind. Keep pressing and releasing the button to increase the rate from
“2X” to “4X”, “6X”, “8X” and “20X”
Direct Track Entry
To select a track directly, touch
the button on screen to display the direct entry menu.
Subject to technical changes
Enter the desired track number using the on-screen number pad, and then press the Enter button. To exit the screen without making a selection,
touch Exit. To clear your entry and start over, touch Clear.
29
MP3/USB/WMA-Operation
Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics.
MP3/WMA Media and File Requirements
This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make
sure it is formatted using the full method and not the quick method to prevent illegal disc operation. Up to 1500 songs/files can be burned onto a
disc for a MEGA DVD music mix. Do not exceed this number of songs/files or disc readability problems may occur.
MP3 Format Compatibility
The file naming formats listed below are compatible with this unit:
• ISO 9660 – file name: 12 characters, file extension: 3 characters
• ISO 9660 – file name: 31 characters, file extension: 3 characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file system standards, it may not be displayed or played back correctly. Use the following
settings when compressing audio data for your MP3 disc:
• Transfer Bit Rate: 128kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to maximum disc capacity, use
the "Disc at once" setting.
MP3 Playing Order
When selected for play, files and folders (Folder Search, File Search or Folder Select) are accessed in the order they were written by the CD writer.
As a result, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set
the order in which MP3/WMA files are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99".For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder
Select, as shown below.
Subject to technical changes
The VME 9309TS player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the
unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the
fourth level.
30
MP3 User Interface
The on-screen indicators and touch key areas for MP3 playback are outlined below.
1. Current track and total number of tracks on root of disc
2. Elapsed playing time, track length
3. Current time
4. Track titles
5. ID3 information
6. II : Touch to play/pause disc playback
7. DIR-: to previous directory
8. >>|: Touch to move to next track
9. |<<: Touch to move to previous track
10.
/ >>: Touch to navigate playlist
11.
/<<: Touch to navigate playlist
12. DIR -: Touch to view the previous folder
13. DIR +: Touch to view the next folder
14. Touch to access the direct entry screen
15. Touch to view the SETUP menu
16. Touch for quick access to Equalizer level settings
17. Touch to view the SOURCE MENU and select a new playback source
18. Folder name
19. 1/2 or 2/2: Touch to stop disc playback
20. DIR+: to next directory
Controlling Playback
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the sequence of the “Root’ directory.
NOTE: When burning MP3 / WMA files onto a DVD disc, use the 2X or 4X burning option, if available. This slower burning speed will help eliminate buffer errors and increase disc reading reliability. Also, use folders when burning large numbers of songs / files to a disc for easy music navigation. Select the "Disc at Once" option and close your disc.
Stopping Playback
Touch the button on screen or press the / BAND button (20) on the remote control to stop disc playback.
To resume playback, touch the button on screen or press the >/|| button (18) on the remote control.
Pausing Playback
Touch the button on screen or press the >/|| button (18) on the remote control to suspend or resume disc playback.
Moving Through Tracks
Subject to technical changes
Press the >>| button (19) on the remote control or on screen or to advance to the next track on the disc. Press the |<< button (17) on the remote
control or on screen to move to the previous track.
31
TROUBLESHOOTING
Problem
Cause
Corrective Action
Unit will not power on
Radio Fuse blown
Car battery fuse blown
Illegal operation
Install new fuse with correct rating
Install new fuse with correct rating
Press the RESET button located in the
bottom right corner of the front panel
Remote control does not function
Battery depleted
Battery installed incorrectly
Replace battery with new one
Remove battery and install correctly
No/low audio output
Improper audio output connection
Volume set too low
Improper “MUTE” connection
Check wiring and correct
Increase volume level
Review wiring diagram and check
“MUTE” connection
Replace speakers
Adjust the channel balance to the center
position
GENERAL
Speakers damaged
Heavily biased volume balance
Speaker wiring is in contact with metal
part of car
Insulate all speaker wiring connections
Poor sound quality or distortion
Pirated disc is in use
Speaker power rating not compatible with unit
Speaker is shorted
Use original copy
Connect proper speakers
Check speaker contact
Tel-Mute malfunction
“MUTE” wire is grounded
Check that the “MUTE” connection is not
grounded and that it’s properly insulated
Unit resets itself when engine is off
Incorrect connection between
ACC and positive battery wire
Check wiring and correct
TFT Auto Open is turned off
Turn TFT Auto Open on
Incorrect connection to parking brake wire
PRK SW is activated, parking brake is not engaged
Check wiring and correct
Stop vehicle in safe place and apply parking brake
TFT MONITOR
Monitor does not open
automatically
No image
Flashing image or interference
appears on screen
Prolonged image or improper
height/width ratio display
DVD is not compatible with current TV system settings
Change setup to accommodate disc
Improper video signal connections
Check wiring and correct
Improper aspect ratio setup
Use correct aspect ratio setting
Monitor stops at incorrect position Moving path is blocked
Press OPEN key to restart monitor
movement
Weak station searching
Auto antenna is not fully extended
Disc region code is not compatible with unit
Connect the auto antenna control cable
properly
Connect the auto antenna control cable
properly
Turn LOCAL function Disc does not play back
Use disc in good condition
Clean disc with soft cloth
Clean laser pickup with cleaning disc
Use compatible disc
Change Parental Lock settings to lower
restriction
Use disc with proper region code
Disc is inserted upside down
Insert disc with label side up
Auto antenna not properly connected
LOCAL function is activated
Disc is warped or scratched
Disc is dirty or wet
Laser pickup is dirty
Incompatible disc is used
Disc rating exceeds Parental Lock rating limit
32
Subject to technical changes
TUNER
Image blurred, distorted, or dark
Disc is illegally copied
Use original disc
PCB cannot be used during
VCD playback
PCB is not available on the disc
No repeat or searching
while playing VCD
PCB is on Turn PCB off
Disc is dirty or scratched
File is damaged/bad recording
Clean disc or replace
Recreate disc with good files
MP3
Interruption occurred
during playback
Incorrect playback message
displayed
Message is longer than LCD can display
Message Displayed
Cause
Loading
Disc is being read
No Disc
Disc is dirty
Disc is upside down
Disc not present in loading compartment
Clean disc with soft cloth
Insert disc with label side up
Insert disc
Bad Disc
Disc is dirty
Disc is upside down
Clean disc with soft cloth
Insert disc with label side up
Unknown disc
Disc format is not compatible with this unit
Region Error
DVD is not compatible with region code of unit
Error
Illegal mechanism operation
Corrective Action
Subject to technical changes
Press EJECT key for 5 seconds to reset
loading mechanism
33
Care and Maintenance
1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent
(such as alcohol) may result in scratching or discoloration.
2. Do not get water or cleaning fluids on the unit.
3. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool
before operating the player again.
4. Never insert anything other than a 5” (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects.
5. Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without an adaptor, as damage to the player and/or disc may occur.
Such damage is not covered by the Warranty on this product.
6. The CD player may not operate properly in extreme hot or cold. If such conditions occur, allow the interior of the vehicle to reach a normal
temperature before using player.
7. When the vehicle warms up during cold weather or under damp conditions, condensation may appear on the LCD panel. Should this occur,
the screen will not operate properly until the moisture has evaporated.
Subject to technical changes
8. We suggest you use a cleaning disc in this unit more frequently than in the unit in your home due to the environmental conditions of the
vehicle.
34
SPECIFICATIONS
DVD/CD Player
Compatible Disc Media:
DVD + R / RW (Single and Dual Layer) and CD-R / RW
Compatible Media Formats:
CD-DA, MP3, WMA, VCD, SVCD, AVI, MPEG1 / 2, XviD, DivX and Kodak
picture CD (JPEG).
Signal to Noise Ratio:
>95dBA
Dynamic Range:
>95dB
Frequency Response:
20Hz to 20 kHz, -3dB
Channel Separation:
> 60dB @ 1 kHz
D/A Converter:
High performance 24-bit / 192 kHz sample rate,
Multi-Bit Sigma-Delta Modulator
Video
Format:
Output:
Input:
NTSC, PAL (auto-detection)
1Vp-p (75-ohm)
1Vp-p (75-ohm)
FM Tuner
Tuning Range:
Mono Sensitivity (-30dB):
Quieting Sensitivity (-50dB):
Alternate Channel Selectivity:
Signal to Noise Ratio @ 1 kHz:
Image Rejection:
Stereo Separation @ 1 kHz:
Frequency Response:
87.5MHz - 107.9MHz
9dBf
15dBf
70dB
58dB
80dB
>30dB
30Hz - 15 kHz, -3dB
AM Tuner
Tuning Range:
Sensitivity (-20dB):
Signal to Noise Ratio @ 1 kHz:
Image Rejection:
Frequency Response:
530 kHz - 1720 kHz
15uV
50dB
60dB
50Hz - 2 kHz, -3dB
Monitor
Screen Size:
Screen Type:
7.0" (Measured diagonally), 16:9 Widescreen
6.06" (154.1mm) W X 3.42" (87mm) H
TFT Liquid Crystal Display (LCD) active matrix
Response Time:
30mSec rise time, 50mSec fall time
Resolution:
• 336,960 sub pixels, 1440 (W) X 234 (H)
Viewing angle:
• 65 degrees left or right
• 40 degrees up
• 65 degrees down
10k
11 to 16VDC, negative ground
500 mA max, current limited protection
500 mA max. current
Subject to technical changes
General
Auxiliary Input impedance:
Power Supply:
Power Antenna (Blue):
USB 1.0
35
D
Wir gratulieren Ihnen! Durch Ihre kluge Wahl sind Sie Besitzer eines AUDIOVOX Mobile Video-Produktes geworden.
AUDIOVOX Mobile Video-Produkte erfreuen sich aufgrund der hohen Qualität eines ausgezeichneten Rufes weltweit. Dieser hohe
Qualitätsstandard ermöglicht es für AUDIOVOX Mobile Video-Produkte 2 Jahre Garantie zu gewähren.
Die Produkte werden während des gesamten Fertigungsvorganges laufend kontrolliert und geprüft. Im Servicefall beachten Sie
bitte folgendes:
1. Die Garantiezeit beginnt mit dem Kauf des Produktes und gilt nur für den Erstbesitzer.
2. Während der Garantiezeit beseitigen wir etwaige Mängel, die nachweislich auf Material- oder Fabrikationsfehler beruhen, nach
unserer Wahl durch Austausch oder Nachbesserung der defekten Teile. Weitergehende Ansprüche, insbesondere auf Minderung,
Wandlung, Schadenersatz oder Folgeschäden sind ausgeschlossen. Die Garantiezeit wird von einer Garantieleistung durch uns
nicht berührt.
3. Am Produkt dürfen keine unsachgemäßen Eingriffe vorgenommen worden sein.
4. Bei Inanspruchnahme der Garantie wenden Sie sich bitte zunächst an Ihren Fachhändler. Sollte es sich als notwendig erweisen, das Produkt an uns einzuschicken, so sorgen Sie bitte dafür, dass • das Produkt in einwandfreier Originalverpackung verschickt wird, • die Kontrollkarte ausgefüllt dem Produkt beiliegt, • die Kaufquittung beigefügt ist.
5. Von der Garantie ausgenommen sind: • Leuchtmittel • Verschleißteile •Transportschäden, sichtbar oder unsichtbar (Reklamationen für solche Schäden müssen umgehend bei der Transportfirma, Bahn oder Post eingereicht werden.) • Kratzer in Metallteilen, Frontabdeckungen u.s.w. (Diese Defekte müssen innerhalb von 5 Tagen nach Kauf direkt bei Ihrem Händler reklamiert werden.) • Fehler, die durch fehlerhafte Aufstellung, falschen Anschluss, unsachgemäße Bedienung (siehe Bedienungsanleitung),
Beanspruchung oder äußere gewaltsame Einwirkung entstanden sind. • Unsachgemäß reparierte oder geänderte Geräte, die von
anderer Seite als von uns geöffnet wurden. • Folgeschäden an fremden Geräten • Kostenerstattung bei Schadensbehebung durch
Dritte ohne unser vorheriges Einverständnis.
GB
Congratulations! You have made a wise selection in becoming the owner of a AUDIOVOX Mobile Video equipment. Due
to high quality AUDIOVOX products have earned an excellent reputation through the western world. And this high quality standard enables us to grant a 2-years warranty for AUDIOVOX Mobile Video products.
The equipments are checked and tested continously during the entire production process. In case you have problems with your
AUDIOVOX Mobile Video equipment, kindly observe the following:
1. The guarantee period commences with the purchase of the component and is applicable only to the original owner.
2. During the guarantee period we will rectify any defects due to faulty material or workmanship by replacing or repairing the defective part at our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damages or subsequential damages, are excluded. The guarantee period is not altered by the fact that we have carried out guarantee work.
3. Unauthorized tampering with the equipment will invalidate this guarantee.
4. Consult your authorized dealer first, if guarantee service is needed. Should it prove necessary to return the component to the
factory, please insure that • the component is packed in original factory packing in good condition • the quality control card has
been filled out and enclosed with the component, • your enclose your receipt as proof of purchase.
5. Excluded from the guarantee are: • Illuminates • Wear parts • Shipping damages, either readily apparent or concealed (claims
for such damages must be lodged immediately with forwarding agent, the railway express office or post office). • Scratches in
cases, metal components, front panels, etc. (You must notify your dealer directly of such defects within three days of purchase.)
• Defects caused by incorrect installation or connection, by operation errors (see operating instructions), by overloading or by external force. • Equipments which have been repaired incorrectly or modified or where the case has been opened by persons other
than us. • Consoquential damages to other equipments. • Reimbursement of cools, without our prior consent, when repairing damages by third parties.
F
Toutes nos félicitations!
Vouz avez bien choisi et êtes le propriétaire heureux d’un produit AUDIOVOX. Les produits AUDIOVOX ont une excellente réputation pour leur bonne qualité. Pour cette raison, nous accordons 2 ans de garantie sur les produits AUDIOVOX.
Les appareils sont soumis pendant toutes les opérations de fabrications à des contrôles et vérifications constants. Si, pourtant,
vous rencontrez des difficulés avec votre appareil AUDIOVOX veuillez tenir compte de ce qui suit:
1. La garantie débute avec l’achat de l’appareil et est valable uniquement pour le premier propriétaire.
2. Pendant la période de garantie nous réparons les dommages provenant des défauts de matériel ou de fabrication et nous procédons, à notre guise, à l’échange ou à la réparation des pièces défectueuses.
3. Aucune réparation impropre ne doit avoir été effectuée à l’appareil.
4. Lors d’une demande de garantie, veuillez vous adresser en premier lieu à votre distributeur. Si ce dernier décide que l’appareil doit nous être retourné, veuillez tenir compte que: • l’appareil soit expédié dans son ermballage d’origine, • la carte de contrôle dûment remplie soit jointe, • le bon d’achat soit joint.
5. Ne sont pas compris dans la garantie: • Matériel d’eclairage • Pièces d’usure • Avaries de transport, visibles ou non (de telles
réclamations doivent être faites immédiatement auprès du transporteur, du chermin de fer ou de la poste). • Des rayures sur le
boîtier, pièces métalliques, couvercles etc. (ces dommages doivent être signalés directement à votre distributeur dans les trois
jours suivant l’achat). • Dommages résultant d’un raccordement incorrect, maniement incorrect (voir instructions de service), surcharge ou application de force extérieure. • Appareils réparés non conformément ou modifiés et qui ont été ouverts par une personne autre que nous. • Dommages ultérieurs à d’autres appareils. • Remboursement des frais à des tiers ayant effectué les réparations sans notre accord préalable.
GARANTIEKARTE
WARRANTY CARD
Typ/ Type
Serien-Nr./Serial-No.
Name und Anschrift des Händlers /Stempel
Name and address of the dealer/stamp
Käufer/Customer
Name/Name
Straße/Street
PLZ, Ort /City
Land /Country
Kaufdatum / buying date
Nur gültig in Verbindung mit Ihrer Kaufquittung!
No warranty without receipt!
Audiovox Audio Produkte GmbH
Lise-Meitner-Str. 9 • D-50259 Pulheim • Germany
Tel. ++49 (0) 2234 807-0 • Fax++49 (0) 2234 807-399
www.audiovox-germany.de