1 Gigaset AL180/AL185/AL280/AL285 The handset at a glance 1 Charge status of the batteries 2 Answer machine icon (AL185/AL285 only) 3 Display keys 1 4 Message key Flashes: new messages received 2 5 AL180/AL185: h Directory key AL280/AL285: d Handsfree key 3 6 Control key (u) 7 Talk key 4 8 AL280/AL285: 5 h Directory key (press 6 down on the control key) 7 8 9 End call key and 9 On/Off key 10 Ringer tone on/off (press and hold in idle status) 11 Keypad lock on/off (press and hold) 12 Recall key 10 11 - Consultation call 12 (flash) 13 - Dialling pause 14 (press and hold) 13 Microphone 14 "Microphone off" key Display key on handset: Pressing a key launches the function that appears above that key in the display. Display INT 11.12. INT ± V 11:56 MENU MENU “ U T ˜ OK Function when pressed Call other registered handp. 10. sets Open main/submenu p. 15). (see Menu tree Go back one menu level. Scroll up/down or adjust volume with u. Move cursor to left/right with u. Backspace deletes one character at a time. Confirm menu function or save entry. ¢ ¢ The base station at a glance AL185/AL285 base station 2 1 Registration/paging key : p. 10) Search for handsets (press briefly, "Paging" p. 10). Register handsets (press and hold 2 On/Off key: activate and deactivate answer machine. Lights up: answer machine is activated. Flashes: there is at least one new message or message is in the process of being recorded. Flashes very quickly for about four seconds: memory is full. 3 Volume keys: (– = quieter; + = louder) During message playback: adjust the speaking volume. While phone is ringing: adjust ringer volume. 4 Play/Stop key: Play back messages from the answer machine, or cancel playback. During message playback: 5 delete current message. 6 Skip to the start of the current message (press once) or go to the previous message (press twice). 7 Skip to next message. ¢ 1 5 6 7 4 3 AL180/AL280 base station 1 ¢ 2 Safety precautions Read this user guide and the safety precautions carefully before use. Explain their contents and the potential hazards associated with using the telephone to your children. $ Only use the mains unit supplied. ¢ Fit only the recommended, rechargeable p. 13), i.e. never use a convenbatteries ( tional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. The operation of medical appliances may be affected. Be aware of the technical conditions in your particular environment, e.g. doctor's surgery. Do not hold the rear of the handset to your ear when it is ringing. Otherwise you risk serious and permanent damage to your hearing. The handset may cause an unpleasant humming noise in hearing aids. Do not install the phone in a bathroom or shower room. The handset and base station are not splashproof. Do not use your phone in environments with a potential explosion hazard, e.g. paint shops. ƒ If you give your Gigaset to someone else, make sure you also give them the user guide. Please remove faulty base stations from use or have them repaired by Service, as they could interfere with other wireless services. Disposal Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority or the dealer you purchased the product from. All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities. If a product displays this symbol of a crossed-out rubbish bin, the product is subject to European Directive 2002/96/EC. The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environment and to health. They are a precondition for the re-use and recycling of used electrical and electronic equipment. For further information on disposing of your used equipment, please contact your local authority, your refuse collection service or the dealer you purchased the product from. ¢ Emergency numbers cannot be dialled if the keypad lock ( p. 1) is activated! Not all of the functions described in this user guide are available in all countries. Care Wipe the base station, charging cradle and handset with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can cause static. Contact with liquid ! If the handset has come into contact with liquid: ◆ Switch off the handset and remove the battery pack immediately. ◆ Allow the liquid to drain from the handset. ◆ Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.). ◆ Do not switch on the handset again until it is completely dry. When it has fully dried out, you will normally be able to use it again. ECO DECT You are helping to protect the environment with your Gigaset AL180/AL185/AL280/AL285. Reduced energy consumption Your telephone has an energy-saving adapter plug and uses less energy. Reduced transmission power The transmission power of your telephone is reduced automatically: The handset's transmission power is reduced depending on the distance to the base station. The transmission power on the base station is reduced to virtually zero when only one handset is registered and the handset is in the base station. You can reduce the transmission power of the handset and base station even more by using Eco Mode/Eco Mode+ (see Menu tree p. 16): ◆ Eco Mode: 80% transmission power reduction in standby mode and during a call (the range of the base station is reduced). ◆ Eco Mode+: 100% transmission power deactivation in standby mode (top left display icon ½). Press and hold the talk key c to check that the base station can be reached. You will hear the ringing tone if the base station can be reached. ¢ 3 First steps Check the pack contents ◆ ◆ ◆ ◆ ◆ ◆ ◆ One Gigaset AL180/AL185/AL280/AL285 base station, one mains adapter, one Gigaset AL18H/AL28H handset, one phone cord, two batteries, one battery cover, one user guide. If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover and a charging cradle with mains adapter for each additional handset. Setting up the base station and charging cradle (if included) The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to +45 °C. Set up the base station at a central location on a flat, non-slip surface in your house or apartment. ¤ Please note Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. p. 16). The range is reduced when Eco Mode is activated ( ¢ The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out. You can also mount the base station and charging cradle on the wall. Please note: ◆ Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices. ◆ Protect your Gigaset from moisture, dust, corrosive liquids and vapours. Connecting the base station ¤ First connect the mains adapter 1. ¤ Then connect the telephone jack 2 and insert the cables into the cable ducts. Please note: ◆ The mains adapter must always be connected, as the phone will not operate without mains connection. ◆ Only use the mains adapter and phone cord supplied. Pin connections on telephone cables can vary. 2 1 1 1 4 Connecting the charging cradle (if included) 2 1 ¤ Connect the flat plug from the power supply 1. ¤ Plug the mains adapter into the plug socket 2. 2 If you need to disconnect the plug from the charging cradle, press the release button 1 and disconnect the plug 2. 1 Setting up the handset for use The display is protected by a plastic film. Please remove the protective film! Inserting the batteries and closing the battery cover Warning Use only the rechargeable batteries recommended by Gigaset Communicatons GmbH ( p. 13). Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. For example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type. ¢ * *Gigaset Communications GmbH is a trademark licensee of Siemens AG. 5 ¤ Insert the batteries the right way round. The polarity is indicated in/on the battery compartment. a b ¤ First insert the battery cover at the top a. ¤ Then press the cover b until it clicks into place. If you need to open the battery cover, for instance to replace the batteries, place your fingertip in the cavity on the casing and pull the battery cover upwards. Placing the handset in the base station and registering V Put into base Before you can use the phone, you must first register the handset to the base station. MENU ¤ Place the handset with the display facing up in the base station. V Registering V INT MENU The handset registers automatically. Registration can take up to 5 minutes. Do not remove the handset from the base station during this time. After successful registration, the idle screen is displayed. Charge status of the batteries: – = e V (flat to full) – = flashes: batteries almost flat – e V flashes: charging If you have purchased a model with multiple handsets, repeat the registration process for each individual handset. Handsets are assigned the lowest available internal number (1-4). If more than one handset is registered to the base station, the internal handset number appears in the top left of the display, e.g. 2. If the internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten. 6 Please note ◆ Each key press interrupts the automatic registration. ◆ If automatic registration does not work, the handset will have to be registered manually ( ¢ p. 10). ◆ Only place the handset in the base station or charging cradle that is intended for it. Initial charging and discharging of the batteries The correct charge level can only be displayed if the batteries are first fully charged and discharged. ¤ Place the handset in the base station or charging cradle for eight hours. ¤ Then remove the handset from the base station or charging cradle and 8h do not replace it until the batteries are completely discharged. Please note ◆ After the first battery charge and discharge you may replace your handset in the base station or charging cradle after every call. ◆ Always repeat the charging and discharging procedure if you remove the batteries from the handset and reinsert them. ◆ The batteries may warm up during charging. This is not dangerous. ◆ After a while, the charge capacity of the batteries will decrease for technical reasons. Setting the date and time Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used. ¢ ¢ ¢ ¢ MENU Settings OK Date/Time OK Date: ~ (enter the day, month and year in 6-digit format) OK Time: ~ (enter hours and minutes in 4-digit format) OK (display message: Saved) a (press and hold to return to idle status) ¢ ¢ ¢ ¢ ¢ ¢ ¢ Please note When entering the time and date, you can move the position of an entry to the left or right by pressing the control button up or down. Display in idle status Once the phone is registered and the time set, the idle display is shown as in this example. If the answer machine is activated (AL185/AL285), the answer machine icon × will be displayed in the header. Your answer machine is set with a pre-recorded announcement. ± 11.12. INT V 11:56 MENU Activating/deactivating the handset Press and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station or charging cradle, it will automatically activate. Your phone is now ready for use. If you have any questions about using your phone, please read the tips on troubleshooting p. 13) or contact our Customer Care team p. 14. ("Questions and answers" ¢ ¢ 7 Making calls Handsfree (AL280/AL285 only) Making external calls and ending calls Activating while dialling: Enter the number ~ and press the handsfree key d. External calls are calls using the public telephone network. ~ (Enter the phone number) c. The phone number is dialled. (Or you can first press and hold c [dial tone] and then enter the number.) During the call you can adjust the earpiece volume using t and set the volume with u. End the call/cancel dialling: Press the end call key a. You can automatically insert a network provider dialling code before any phone number p. 16). (see Menu tree "Preselection" ¢ ¢ Switching between earpiece and handsfree mode: During a call and when listening to the answer machine (AL285 only), press the handsfree key d to activate or deactivate handsfree talking. During a call, use t to activate the menu for setting the handsfree volume and use u to set the volume. Using the directory and lists Accepting a call Directory The handset indicates an incoming call by ringing and by a display on the screen. Press the talk key c to accept the call. When Auto Answer is activated (see Menu tree p. 16), simply remove the handset from the base station/charging cradle. In idle status, use t to activate the menu for setting the call volume and use u to set the volume. To open the directory: press h. You can save up to 40 (AL180/AL185) or 80 (AL280/285) phone numbers (max. 32 digits) with corresponding names (max. 14 characters). Enter p. 12. letters/characters ¢ Calling Line Identification When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory. Preconditions: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). ® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if CLI has not been requested. Muting You can mute your handset when making external calls. Your caller can no longer hear you. Press the "Microphone off" key m during the call to activate/deactivate the function. ¢ Saving the first number in the directory h ¢ New Entry? ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter number) ¢ OK Storing a number in the directory h ¢ MENU ¢ New Entry ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter number) ¢ OK Selecting a directory entry Open the directory with h. You have the following options: ◆ Use u to scroll through the entries until the required name is selected. ◆ Enter the first character of the name and scroll to the entry with u, if required. Dialling with the directory h ¢ u (select entry) ¢ c Using other functions h ¢ u (select entry) ¢ MENU 8 The following functions can be selected with u: New Entry Save new phone number. Show Number Display the phone number. Use Number Edit or add to the number. Then dial or use other functions with MENU. Edit Entry Edit selected entry. Delete Entry Delete selected entry. Send Entry Send a single entry to another p. 8). handset ( Delete List Delete all directory entries. Send List Send the complete list to p. 8). another handset ( Shortcut For shortcuts, assign the current entry to a key. ¢ ¢ Using shortcut keys You can assign directory entries to the keys 0 and 2–9: h ¢ u (select entry) ¢ MENU ¢ Shortcut ¢ OK ¢ ~ (press the key you want to assign the entry to) To dial, press and hold the required shortcut key. Sending the directory to another handset Preconditions: ◆ The sending and receiving handsets must both be registered to the same base station. ◆ The other handset and the base station can send and receive directory entries. Calls list/answer machine (network mailbox) list An advisory tone sounds and the message key flashes as soon as a new entry appears in the calls list/answer machine list. A message appears in the display. When you press the f key, all the lists are displayed. If only one list contains new messages, this will be opened automatically. Please note: If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made (depending on your network provider). Calls list ¢ Precondition: CLIP ( p. 7) Depending on the type of list set, the calls list conp. 16) tains ( ◆ answered calls ◆ missed calls ◆ calls recorded by the answer machine (AL185/ AL285 only) Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved. The calls list is displayed as follows: ¢ CallsList 01+02 Number of new entries + number of old, read entries h ¢ u (select entry) ¢ MENU ¢ Send Entry / Send List ¢ OK ¢ ~ (enter the internal number of the Open the calls list f ¢ CallsList 01+02 ¢ OK Last number redial list Using other functions receiving handset) ¢ OK This list contains the ten last dialled numbers. Dialling from the last number redial list c (press briefly) ¢ u (select entry) ¢ c Managing entries in the last number redial list c (press briefly) ¢ u (select entry) ¢ MENU The last incoming call is displayed. If necessary, use u to select another entry. u (select entry) ¢ MENU The following functions can be selected with u: Delete Entry Delete current entry. Copy to Dir. Copy an entry to the directory. Date/Time Call date and time (if set). Status New Call: new missed call. Old Call: entry already read. Answ.: call taken. Delete List Warning! All old and new entries will be deleted. You can select the following settings: Use Number Edit or add to the number. Then dial or use other functions with MENU. Copy to Dir. Copy an entry to the directory. Delete Entry Delete selected entry. Delete List Delete all entries. Calling back a caller from the calls list f ¢ CallsList 01+02 ¢ OK ¢ u (select entry) ¢c 9 Answer machine list (AL185/AL285 only) You can use the answer machine list to listen to the messages that are on the answer machine. The answer machine list is displayed as follows: VoiceMail 01+02 Please note: Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking of more than 2 seconds. Playing back or deleting announcements ¢ p. 15. Number of new messages + number of old, played back messages See Menu tree Opening the answer machine list f ¢ VoiceMail 01+02 ¢ OK Playing/deleting messages If you have new messages, playback will start with the first new message, otherwise with the first old message. Using other functions u (Select entry) ¢ MENU The following functions can be selected with u: Open the answer machine list to play back messages. Stopping and controlling playback During message playback: 2 t Stop playback. Press 2 again to resume. 2xt Skip to the previous message. Go to the start of the current message. Continue Resume paused playback. v Skip to the next message. Volume Set the volume. 2xv Skip to the next message but one. Copy to Dir. Copy an entry to the directory. Delete all old Delete all old messages. Operating the answer machine (AL185/AL285) The answer machine can be operated from the handset or by using the key on the base station p. 1). ( The telephone is supplied with a pre-recorded announcement. You can only record your own announcement messages using the handset. This pre-recorded announcement is used if no personal announcement is available. If the memory is full, the answer machine switches itself off automatically. It activates again automatically when you delete old messages. ¢ Activating/deactivating the answer machine ¢ MENU Voice Mail OK (‰ = on) ¢ ¢ OK ¢ Answer Mach. When you switch on the answer machine, the ± icon appears in the display. Recording your own announcement ¢ ¢ OK ¢ Announcements ¢ OK ¢ OK ¢ Speak after OK ¢ OK MENU Voice Mail Rec announce ¢ You hear the ready tone (short tone). Now speak your announcement (at least 3 sec.). Press OK to confirm or press a or ” to reject your recording. After recording, the announcement is played back for you to check. Deleting individual messages While playback is paused, press the ˜ display key. Deleting all old messages During playback or pause: MENU ¢ Delete all old ¢ OK (Confirm the security prompt) Picking up a call from the answer machine You can still accept a call while the answer machine is recording the message by pressing c . Recording stops and you can speak to the caller. Setting up the answer machine The answer machine has already been preset at the factory. Make individual settings using the handset. Details on how to set a delay time, after which the answer machine is to answer a call, as well as details on how to set the recording length and activate call screening during the recording, are availp. 15. able from the Menu tree ¢ Setting a different language You can change the language used for voice prompts and the pre-recorded announcement. MENU ¢ 4 3 9 2 1 (starts the procedure). Selecting the language: 0 (English), 1 (French), 2 (Arabian). The display shows Saved. 10 Assigning key 1 for fast access to the answer machine (network mailbox) Simply press and hold key 1 on the handset and you will be connected directly to the answer machine (network mailbox). p. 15. See Menu tree ¢ Remote operation when on the move You can check and activate your answer machine from any other telephone (hotel, pay phone etc.). Preconditions: ◆ You have set a system PIN other than 0000 p. 16. ◆ The phone you are using for remote operation has touch tone dialling (DTMF), i.e. you hear different tones when you press the keys. ¢ Calling the answer machine and playing back messages ~ (Dial your own number) ¢ while listening to your announcement: press the 9 key and enter the system PIN The following keys are used for operation: A Go to the start of the current message. Press twice to go back to the previous message. B 3 0 Stop playback. Press again to resume. Skip to next message. Delete current message. Activating the answer machine ~ (Enter your own number and allow the phone to ring until you hear the message: "Please enter PIN") ~ enter system PIN ¢ Your answer machine is activated. It tells you how much memory time is left. The messages are now played back. The answer machine cannot be deactivated remotely. Locating a handset ("paging") You can locate your handset using the base station. ◆ Briefly press the registration/paging key on the p. 1). base station ( ◆ All handsets will ring simultaneously ("paging"), even if the ringer tones are deactivated. End paging: briefly press the register/paging key p. 1) or the talk key c on on the base station ( a handset. ¢ ¢ Registering handsets You can register up to four handsets on your base station (Gigaset AL18H/AL28H) recommended). Please note: Each additional handset must be registered on the base station in order for it to work properly! For automatic registration of handsets to Gigaset AL180/AL185/AL280/AL285, see ¢ p. 5. Manual registration of handsets to Gigaset AL180/AL185/AL280/AL285 ¢ Settings ¢ OK ¢ Handset ¢ OK ¢ Register HS ¢ Enter the system PIN of the base station (default is 0000) ¢ OK. 1. On the handset: MENU Registering flashes in the display. 2. On the base station: within 60 sec. of entering the system PIN, press and hold the registration/ p. 1) (min. 3 sec.). paging key ( Registration takes approx. 1 minute. ¢ De-registering handsets Handsets can only be de-registered by resetting the base station to its default settings. This will p. 11. also reset every other setting If you have only registered handsets for other GAPcompatible devices, these can only be de-regisp. 11. tered with a hardware reset ¢ ¢ Using several handsets Making internal calls Internal calls are free calls to other handsets that are registered to the same base station. To make a call to other handsets, press ◆ INT ¢ ¢ ¢ ~ (1...4, enter internal number of the OK, the handset is called or handset) ◆ INT star key P OK, all handsets are called. When a participant answers you can speak to them. To end the call, press a. ¢ 11 Internal consultation call/connecting a call You are in conversation with an external participant. Press the INT key and call one or all handsets. The external participant hears the hold music. ◆ Before the internal participant has answered, press the end call key a; the call is diverted to the participant who answers the call. ◆ After the internal participant has answered, you can talk to him. Press the end call key a; the call is diverted, or press the display key ; you are reconnected to the external participant. Listening in to an external call You are conducting an external call. An internal participant can listen in on this call and take part in the conversation (conference). Precondition: The Listening in function must be activated. Activating/deactivating listening in ¢ ¢ ¢ ¢ MENU Settings OK Base Listening in OK (‰ = on) ¢ ¢ OK Phone settings For details on how to make audio settings, see p. 15. Menu tree For details on how to set the system PIN on the p. 16. base station, see the Menu tree ¢ ¢ Changing the display language ¢ ¢ ¢ ¢ ¢ ¢ MENU Settings OK Handset OK Language OK select the language ¢ The current language is indicated by ‰. ¢ OK If you accidentally choose a language you do not understand: MENU ¢ 4 2 1 (press the keys one after the other) Select the correct language with u and press OK. Resetting the handset You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's registration to the base station will be retained. ¢ MENU Settings Reset Handset ¢ ¢ OK ¢ Handset ¢ OK ¢ OK Internal listening in (conference) Cancel the reset with a. You want to listen in to an existing external call. Briefly press and hold the c key. You can listen in to the call. All participants hear a signal tone. To end: press the end call key a. All participants hear a signal tone. If the first internal participant presses the end call key a, the handset that has "listened in" remains connected to the external participant. Restoring the base station to the factory settings Setting the alarm clock When restoring factory settings: ◆ All handsets are de-registered ◆ Individual settings are reset ◆ All lists are deleted ◆ The system PIN is reset to the original code 0000 Only the date and time are retained. Activating/deactivating the alarm clock Software reset ¢ MENU Alarm Clock OK (‰ = on) ¢ ¢ OK ¢ Activation When activated: ¢ Set the wake-up time ¢ OK When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon 9 will appear on the screen and the wake-up time will be displayed instead of the date. Setting the wake-up time MENU ¢ Alarm Clock ¢ OK ¢ Wake-up time ¢ OK Enter the wake-up time in hours and minutes, then press OK. ¢ ¢ ¢ Base ¢ OK ¢ MENU Settings OK Base Reset OK ¢ Hardware reset Disconnect the power cord from the base station. p. 1) Hold down the registration/paging key ( on the base station while reconnecting the power cable to the base station. Release the key after approximately 5 seconds. ¢ Repeater mode With a repeater you can increase the range of your base station. You will need to activate repeater p. 16). Repeater mode and Eco mode or mode ( p. 1) cancel each other out. Eco mode+ ( ¢ ¢ 12 Operating the base station on the PABX The following settings are only necessary when your PABX requires them, see the user guide for your PABX. When entering the digits, enter them slowly one after the other. Changing the dialling mode MENU ¢ 4 I O 1 1 ¢ The number for the set dialling mode flashes: 0 = touch tone dialling (DTMF); 1 = dial pulsing (DP) enter number OK. ¢ ¢ Setting recall MENU ¢ 4 I O 1 2 ¢ The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; enter number OK. 7 = 800 ms ¢ ¢ Changing pause after line seizure You can set the length of the pause inserted between pressing the talk key c and sending the phone number. ¢ ¢ ¢ MENU 4IO1O The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec. enter number OK. ¢ Changing the pause after the recall key MENU ¢ 4 I O 1 4 ¢ The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms enter number OK. ¢ ¢ Appendix Entering letters/characters Press the relevant key the number of times indicated. Briefly press the hash key # to switch from "Abc" to "123" mode, from "123" to "abc"mode and from "abc" to "Abc" mode. Standard characters 1 2 I 4 5 L M N O Q P # 1x 2x 1) 1 a b d e g h j k m n p q t u w x . , * / Abc --> 123 123 --> abc 3x £ c f i l o r v y ? ( # 4x $ 2 3 4 5 6 s 8 z ! ) @ 5x ¥ ä ë ï 6x 7x 8x 9x 10x 11x 12x 13x 14x ¤ á à â ã ç é è ê í ì î ö ñ ó ò ô 7 ß ü ú ù û 9 ÿ ý æ ø 0 + - : ¿ < = > % \ & § õ å ¡ " ’ ; _ 1) Space Arabic 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 1 2 I 4 5 L M N O Q 1) . P * # Abc --> 123 1) Space 1 $ , / 123 --> abc 2 a b c 3 4 g h i 5 j k l 6 m n o 7 p q r 8 t u 9 w x y ? ! 0 + - : ( ) < = > % # @ \ & d e f s v z “ ; ‘ _ 13 Specifications Recommended batteries Technology: Nickel-metal-hydride (NiMH) Size: AAA (Micro, HR03) Voltage: 1.2 V Capacity: 400–800 mAh We recommend the following types of battery: ◆ GP 550/700 mAh ◆ Yuasa Phone 700/800 mAh ◆ Peacebay 550/650 mAh (Valid at the time of going to press) The handset is supplied with recommended batteries. approx. 1.3 W approx. 1.3 W approx. 1.5 W General specifications DECT standard GAP standard Range Base station power supply Environmental conditions in operation is supported is supported up to 300 m outdoors up to 50 m indoors 230 V ~/50 Hz +5 °C to +45 °C, 20% to 75% elative humidity Questions and answers If you have any queries about the use of your telephone, visit our website at www.gigaset.com/customercare for 24-hour support. The table below contains a list of common problems and possible solutions. Problem Cause Nothing appears in the display. The handset is not switched on. Cause You cannot hear a ringer/ dialling tone from the fixed line network. The phone cord supplied has not been used or has been replaced by a new cord with the wrong jack connections. Solution Please always use the phone cord supplied or ensure that the pin connections are correct when purchasing from a retailer: 3-4 assignment of telephone leads/ EURO CTR37. Reset the system PIN The system PIN Error tone sounds after you have entered to the default 0000 p. 11. system PIN is incorrect. All handsets are prompt. de-registered. All PIN forgotten. settings are reset. All lists are deleted. ¢ Authorisation Base station power consumption In standby mode – Handset in base station – Handset outside base station During a call Problem Solution Press the end call key a for approx. 5 seconds or place the handset in the base station. The batteries are Charge or replace the batteries. flat. The handset is Move the handset No wireless outside the range closer to the base connection to the base of the base stastation. station, tion. Base flashes The handset is not Register the handset p. 10. in the display. registered. The base station is Check the mains connector on the base not turned on. p. 3. station ¢ ¢ This device is intended for connection to analogue networks outside the EEA (with the exception of Switzerland) depending on national type approval. Country-specific requirements have been taken into consideration. We, Gigaset Communications GmbH, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/CE. A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address: www.gigaset.com/docs. 14 Service (Customer Care) You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: www.gigaset.com/customercare This site can be accessed at any time wherever you are. It will give you 24/7 support for all our products. It also a list of FAQs and answers plus user guides for you to download. You will also find frequently asked questions and answers in the Questions and Answers section of this user guide in the appendix. If the device needs to be repaired, please contact one of our Customer Care Centers: Abu Dhabi. . . . . . . . . . . . .97 12 62 23 800 Argentina . . . . . . . . . . . . . 0800-888-9878 Australia . . . . . . . . . . . . . . . .1300 665 366 Austria . 05 17 07 50 04 (0,065 Euro/Min.) Bahrain . . . . . . . . . . . . . . .97 31 73 11 173 Belgium . . . . . . . . . . . . . . . . 0 78 15 66 79 Bosnia Herzegovina . . . . . . . . 033 276 649 Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grande Capitais e Regiões Metropolitanas: . . . . . . . . . . . . . . . . . . . . . (11) 4003 3020 . . . . . . . . . . . . . . . . . .R$ 0,14 (US$ 0,069) Demais localidades: . . . . . 0800 888 3020 . . . . . . . . . . . . . . . . . .R$ 0,20 (US$ 0,098) Bulgaria. . . . . . . . . . . . . . . . . 02 873 94 88 Canada . . . . . . . . . . . . . . . . .866 247 8758 China . . . . 0 21 400 670 6007 (RMB 0.11) Croatia . . . . . . . . 01 / 2456 555 (0,23 Kn) Czech Republic . . . . . . . . . . . . 233 032 727 Denmark . . . . . . . . . . . . . . . . . 35 25 86 00 Dubai . . . . . . . . . . . . . . . .97 14 39 69 944 Egypt. . . . . . . . . . . . . . . . . . . 202 7623441 Finland . . . . . . . . . . . . . . . . 09 23 11 34 25 France. . . 01 56 38 42 00 (Appel national) Germany . . . . . . . . . . . . . . .01805 333 222 (0,14 Euro/Min. aus dem Festnetz der Deutschen Telekom. Für Anrufe aus den Mobilfunknetzen können abweichende Preise gelten) Greece . . . . . . 801 1000 500 (0,026 Euro) Hong Kong . . . . . . . . . . . . . . . . 2763 0203 . . . . . . . . . . . . . . . . . . . . . . . . . 2389 7285 Hungary . . . . . . . . . 06 14 71 24 44 (27 Ft) India . . . . . . . . . . . . . . .Please refer to your . . . . . . . . . . . . . . . . . . . local warranty card Ireland . . . . . . . . . . . . . . . . 18 50 77 72 77 Israel . . . . . . . . . . . . . . . . . . 1 700 700 727 Italy. . . . . . . . . . . . . . . . . . . . 184.108.40.206 Jordan . . . . . . . . . . . 00962 6 5625460/1/2 Kuwait . . . . . . . . . . . . . . . 00965-2464993 Latvia . . . . . . . . . . . . . . . . . . . . . 7 50 11 18 Lebanon. . . . . . . . . . . . . . 00961-1236110 Luxembourg . . . . . . . . . . . 40 66 61 56 40 Malaysia. . . . . . . . . . . . . . . .603 77124304 Malta . . . . . . . . . . . . . . +353 21 4940 632 Mexico . .01800 999 4442738 (01800 999 Gigaset) Netherlands . . . . . . . . .0900-3333102 (0,25 Euro/min.) New Zealand . . . . . . . . . . . 08 00 27 43 63 Norway . . . . . . . . . . . . . . . . . . 22 70 84 00 Oman. . . . . . . . . . . . . . . . 96 82 47 09 281 Poland . . . . . . . . . . . . . . . . . 0 801 140 160 Portugal . . . . . . . . . . . . (351) 808 781 223 Romania . . . . . . . . . . . . +4.021.529.7114. Russia. . . . . . . . . . . . . . . 8 (495) 228 1312 Serbia. . . . . . . . . . . . . . . . . . 0800 222 111 Singapore . . . . . . . . . . . . . . . . . 6735 9100 Slovak Republic . . . . . . . . . . . . . 02 59 68 22 66 (4,428 sk) Slovenija . . . . . . . . . . . . . . . 0 14 74 63 36 South Africa. . . . . . . . . . . . 08 60 10 11 57 Spain . . . . . . . . . . . . . . . . . . . . 902 103935 Sweden . . . . . . . . . . . . . . . . . 08 750 99 11 Switzerland . . . . . . . . . . 0848 212 000 (0,08 SFr./Min.) Taiwan . . . . . . . . . . . . . . . . . 02 266 24343 Thailand. . . . . . . . . . . . . . . . . 02 722 1118 Turkey . . . . . . . . . . . . . . . .0216 459 98 59 Ukraine . . . . . . . . . . . .+380-44-451-71-72 United Arab Emirates . . . . . 0 43 66 03 86 United Kingdom . . . . . . . 0 84 53 67 08 12 USA . . . . . . . . . . . . . . . . . 1-866 247-8758 . . . . . . . . . . . . . . . . . . . . . . . . . . . (toll free) Please have your record of purchase ready when calling. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers. 15 Menu tree Your phone has an extensive range of features. These are offered in the form of menus. To select a function while the phone is in idle status, press MENU (open menu), use the t and v keys to scroll to the function you require and press OK to confirm. To return to idle status: press and hold the a key. 1 MENU ¢ 4 1 ¢ OK Alarm Clock 1-1 Activation Activating/deactivating the alarm clock 1-2 Wake-up time Input format: HHMM 2 As an alternative to selecting functions using the t and v buttons, you can also enter the digit combination that is in front of the function in the menu tree. For setting the time and date, for example: Audio Settings 2-1 Handset Volume Can be set to one of 3 levels (AL180/AL185) 2-1 Handset Volume 2-2 Ringer Volume 2-3 Ringer Melody 2-4 Advis. Tones 2-5 Battery Low 3 2-1-1 Earpiece Can be set to one of 3 levels (AL280/AL285) 2-1-2 Speaker Can be set to one of 5 levels (AL280/AL285) 5 levels + "crescendo" available 2-3-1 External Calls 10 ringer tones available for external calls 2-3-2 Internal Calls 10 ringer tones available for internal calls 2-3-3 Alarm Clock 10 ringer tones available for alarm clock During a conversation 2-5-1 Off Warning tone to indicate battery is almost flat: never 2-5-2 On always 2-5-3 During Call only during a call Voice Mail 3-1 Set Key 1 (all devices) (Devices with answer machine only) 3-2 Answer Mach. 3-3 Call Screening 3-4 Announcements 3-1-1 Netw. Mailbx Assign key 1 with network mailbox and enter the network mailbox number (in idle status, press and hold key 1 to dial). Netw. Mailbx: your network provider's answer machine; must be requested separately. The network mailbox list can be displayed if your network provider supports this function and if key 1 has been assigned with the network mailbox. 3-1-2 Answer Mach. Assign key 1 with answer machine (in idle status, press and hold to dial). Activating/deactivating the answer machine 3-3-1 Handset You can use the loudspeaker on the handset to screen a message that is being recorded (AL285 only). 3-3-2 Base You can use the loudspeaker on the base station to screen a message that is being recorded. 3-4-1 Rec announce ¢ p. 9 3-4-2 Play announce Play your announcement 3-4-3 Del announce Delete your announcement 16 3-5 Message Length 3-6 Ring Delay 4 3-5-1 Maximum Do not limit the recording time for each call. 3-5-2 1 Minute Limit the recording time to 1 minute per call. 3-5-3 2 Minutes Limit the recording time to 2 minutes per call. 3-5-4 3 Minutes Limit the recording time to 3 minutes per call. 3-6-1 Immediately Call is answered immediately. 3-6-2 10 sec Call is answered after 10 seconds. 3-6-3 18 sec Call is answered after 18 seconds. 3-6-4 30 sec Call is answered after 30 seconds. 3-6-5 Auto If there are no new messages, the answer machine answers a call after 18 seconds. If new messages are present, the answer machine answers a call after just 10 seconds. Settings 4-1 Date/Time 4-2 Handset 4-3 Base Enter date (DDMMYY format), then time (HHMM format) 4-2-1 Language Set the display language ¢ p. 11 4-2-2 Auto Answer Automatically activate/deactivate auto answer 4-2-3 Register HS Manually register the handset 4-2-4 Reset Handset Reset the handset 4-3-1 Audio Settings (AL185/AL285 only) 4-3-2 Call list type ¢ p. 11 ¢ p. 10 4-3-1-1 Ringer Volume 5 level settings + "crescendo" + "off" 4-3-1-2 Ringer Melody 10 selectable melodies 4-3-2-1 Missed Calls 4-3-2-2 All Calls ¢ p. 8 ¢ p. 8 4-3-3 System PIN Change system PIN (default is 0000) 4-3-4 Base Reset Restore factory settings 4-3-5 Additional 4-3-6 Listening in 4-3-7 Preselection ¢ p. 7 ¢ p. 11 ¢ p. 11 ¢ p. 2 4-3-5-3 Eco Mode Activating/deactivating ¢ p. 2 Activate/deactivate the function ¢ p. 11 4-3-5-1 Repeater Activating/deactivating 4-3-5-2 Eco Mode+ Activating/deactivating 4-3-7-1 Presel. Number Network provider dialling code, should be inserted automatically before the dialled phone number. 4-3-7-2 With Preselect First digits of the dialling codes, should be dialled with preselection. 4-3-7-3 Without Presel First digits of dialling codes, should be dialled without preselection.