Motorola Mototrbo DM3600 User guide

Professional Digital Two-Way Radio System
DM 3600 / DM 3601
Display Mobile
User Guide
75D06-A.book Page i Thursday, January 4, 2007 8:53 AM
Contents
Important Safety Information . . . . . . . . . . . . . . . . . . v
Product Safety and RF Exposure Compliance . . . v
Computer Software Copyrights . . . . . . . . . . . . . . . vi
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
How to Use This User Guide . . . . . . . . . . . . . . . . . . 1
What Your Dealer/System Administrator
Can Tell You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . . 2
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 2
Identifying Radio Controls . . . . . . . . . . . . . . . . . . . . 3
Radio Controls You Will Be Using . . . . . . . . . . . . . . 3
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . 4
Assignable Radio Functions . . . . . . . . . . . . . . . . . 4
Assignable Settings/Utility Functions . . . . . . . . . . . 5
Accessing the Preprogrammed Functions . . . . . . . . 5
Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . 6
Switching Between Analog and Digital Mode . . . . . . 6
Receiving and Making Calls . . . . . . . . . . . . . . . . . . . 9
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting a Radio Channel, Subscriber Alias
or ID, or Group Alias or ID . . . . . . . . . . . . . . . . . . . 10
Receiving and Responding to a Voice Call . . . . . . . 10
Receiving and Responding to a Group Call . . . . . 10
Receiving and Responding to a Private Call . . . 11
Receiving an All Call . . . . . . . . . . . . . . . . . . . . . . 12
Making a Voice Call . . . . . . . . . . . . . . . . . . . . . . . . 12
Making a Voice Call with the Channel
Rocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Making a Group Call . . . . . . . . . . . . . . . . . . . . . 12
Making a Private Call . . . . . . . . . . . . . . . . . . . . 13
Making an All Call . . . . . . . . . . . . . . . . . . . . . . . 13
Making a Group or Private Call with the
One Touch Call Button . . . . . . . . . . . . . . . . . . . . 14
Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Permanent Monitor . . . . . . . . . . . . . . . . . . . . . . . . . 15
Contents
This User Guide contains all the information you need
to use the MOTOTRBO Series Mobiles.
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Identifying Status Indicators . . . . . . . . . . . . . . . . . . . 7
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Call Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
i
English
Contents
75D06-A.book Page ii Thursday, January 4, 2007 8:53 AM
Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . .
Radio Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending a Radio Check . . . . . . . . . . . . . . . . . . .
Remote Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initiating Remote Monitor . . . . . . . . . . . . . . . . . .
Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing an Entry in the Scan List . . . . . . . . . . . .
Editing the Scan List . . . . . . . . . . . . . . . . . . . . . .
Adding a New Entry to the Scan List . . . . . . . .
Deleting an Entry from the Scan List . . . . . . . .
Setting and Editing Priority for an Entry
in the Scan List . . . . . . . . . . . . . . . . . . . . . . . .
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting and Stopping Scan . . . . . . . . . . . . . . . .
Responding to a Transmission During a Scan . .
Deleting a Nuisance Channel . . . . . . . . . . . . . . .
Restoring a Nuisance Channel . . . . . . . . . . . . . .
Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Group Call from Contacts . . . . . . . . . .
Making a Private Call from Contacts . . . . . . . . .
Call Indicator Settings . . . . . . . . . . . . . . . . . . . . . .
Activating and Deactivating Call Ringers
for Private Calls . . . . . . . . . . . . . . . . . . . . . . . . .
ii
English
15
15
16
17
17
18
18
19
19
19
20
20
21
21
22
22
23
23
23
24
24
Activating and Deactivating Call Ringers
for Text Messaging . . . . . . . . . . . . . . . . . . . . . .
Assigning Ring Styles . . . . . . . . . . . . . . . . . . . .
Escalating Alarm Tone Volume . . . . . . . . . . . . . .
Call Log Features . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . .
Missed Call Screen . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Call from a Call List . . . . . . . . . . . . . .
Call Alert Operation . . . . . . . . . . . . . . . . . . . . . . . .
Receiving and Acknowledging a
Call Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call Alert from the Contacts List . . . . .
Making a Call Alert with the One Touch
Call Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emergency Operation . . . . . . . . . . . . . . . . . . . . . .
Receiving an Emergency Alarm . . . . . . . . . . . . .
Responding to an Emergency Alarm . . . . . . . . .
Sending an Emergency Alarm . . . . . . . . . . . . . .
Sending an Emergency Alarm with Call . . . . . . .
Sending an Emergency Alarm with
Voice to Follow . . . . . . . . . . . . . . . . . . . . . . . . . .
Reinitiating an Emergency Mode . . . . . . . . . . . .
Exiting Emergency Mode . . . . . . . . . . . . . . . . . .
25
25
26
26
26
27
27
28
28
28
29
29
30
30
31
31
32
32
33
75D06-A.book Page iii Thursday, January 4, 2007 8:53 AM
Accessing General Radio Information . . . . . . . . . 43
Checking the Radio ID . . . . . . . . . . . . . . . . . . . 43
Checking the Firmware Version . . . . . . . . . . . . 44
Checking the Codeplug Version . . . . . . . . . . . . 44
Keypad Microphone Features . . . . . . . . . . . . . . . . 44
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Turning Keypad Tones On or Off . . . . . . . . . . . . . 46
Additional Advanced Features . . . . . . . . . . . . . . . . 46
Initiating a Radio Check by Manual Dial . . . . . . . 46
Initiating Remote Monitor by Manual Dial . . . . . . 47
Making a Private Call by Manual Dial . . . . . . . . . 48
Making a Private Call by Alias Search . . . . . . . . 48
Storing an Alias or ID from the Missed
Call List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Sending a Call Alert by Manual Dial . . . . . . . . . . 49
Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Writing and Sending a Text Message . . . . . . . . . 50
Replying to Text Messages from the Inbox . . . . . 50
Editing a Quick Text Message . . . . . . . . . . . . . . . 51
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Radio Disable via Manual Dial . . . . . . . . . . . . . . . 52
Radio Enable via Manual Dial . . . . . . . . . . . . . . . 53
Contents
Text Messaging Features . . . . . . . . . . . . . . . . . . . 33
Sending a Quick Text Message . . . . . . . . . . . . . . 33
Sending a Quick Text Message with the
One Touch Call Button . . . . . . . . . . . . . . . . . . . . 34
Receiving a Text Message . . . . . . . . . . . . . . . . . 34
Reading a Text Message . . . . . . . . . . . . . . . . . . . 34
Managing Text Messages . . . . . . . . . . . . . . . . . . 35
Viewing a Text Message from the Inbox . . . . . 35
Replying to a Text Message with Quick Text . . 35
Deleting a Text Message from the Inbox . . . . . 36
Deleting All Text Messages from the Inbox . . . 37
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Radio Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Radio Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Setting the Squelch Level . . . . . . . . . . . . . . . . . . 39
Setting the Power Level . . . . . . . . . . . . . . . . . . . . 40
Controlling the Display Backlight . . . . . . . . . . . . . 40
Turning Horns/Lights On or Off . . . . . . . . . . . . . . 41
Turning Radio Tones/Alerts On or Off . . . . . . . . . 41
Turning the Talk Permit Tone On or Off . . . . . . . 42
Turning the LED Indicators On or Off . . . . . . . . . 42
Turning the Introduction Screen On or Off . . . . . . 43
iii
English
Contents
75D06-A.book Page iv Thursday, January 4, 2007 8:53 AM
iv
English
75D06-A.book Page v Thursday, January 4, 2007 8:53 AM
Important Safety Information
!
Caution
Before using this product, read the operating
instructions for safe usage contained in the
Product Safety and RF Exposure booklet
enclosed with your radio.
This radio is restricted to occupational use only to
satisfy FCC RF energy exposure requirements.
Before using this product, read the RF energy awareness
information and operating instructions in the Product
Safety and RF Exposure booklet enclosed with your radio
(Motorola Publication part number 6866537D37) to
ensure compliance with RF energy exposure limits.
For a list of Motorola-approved antennas and other
accessories, visit the following website:
http://www.motorola.com/governmentandenterprise
Important Safety Information
Product Safety and RF Exposure Compliance
ATTENTION!
v
English
75D06-A.book Page vi Thursday, January 4, 2007 8:53 AM
Computer Software Copyrights
Computer Software Copyrights
The Motorola products described in this manual may
include copyrighted Motorola computer programs stored
in semiconductor memories or other media. Laws in the
United States and other countries preserve for Motorola
certain exclusive rights for copyrighted computer
programs including, but not limited to, the exclusive right
to copy or reproduce in any form the copyrighted
computer program. Accordingly, any copyrighted
Motorola computer programs contained in the Motorola
products described in this manual may not be copied,
reproduced, modified, reverse-engineered, or distributed
in any manner without the express written permission of
Motorola. Furthermore, the purchase of Motorola
products shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Motorola,
except for the normal non-exclusive license to use that
arises by operation of law in the sale of a product.
vi
English
The AMBE+2TM voice coding Technology embodied in
this product is protected by intellectual property rights
including patent rights, copyrights and trade secrets of
Digital Voice Systems, Inc.
This voice coding Technology is licensed solely for use
within this Communications Equipment. The user of this
Technology is explicitly prohibited from attempting to
decompile, reverse engineer, or disassemble the Object
Code, or in any other way convert the Object Code into a
human-readable form.
U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579,
#5,226,084 and #5,195,166.
75D06-A.book Page 1 Thursday, January 4, 2007 8:53 AM
Getting Started
How to Use This User Guide . . . . . . . . . . . . . . . . . . . . . page 1
What Your Dealer/System Administrator Can Tell You . page 1
Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . . . . page 2
Adjusting the Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . page 2
How to Use This User Guide
You can consult your dealer or system administrator about the
following:
• Is your radio programmed with any preset conventional
channels?
• Which buttons have been programmed to access other
features?
• What optional accessories may suit your needs?
Getting Started
Take a moment to review the following:
What Your Dealer/System Administrator
Can Tell You
This User Guide covers the basic operation of the MOTOTRBO
Mobiles.
However, your dealer or system administrator may have
customized your radio for your specific needs. Check with your
dealer or system administrator for more information.
Throughout this publication, two icons are used to differentiate
Analog mode and Digital mode only features:
Indicates an Analog Mode only feature.
Indicates a Digital Mode only feature.
For features that are available in both Analog and Digital
modes, no icon is shown.
1
English
75D06-A.book Page 2 Thursday, January 4, 2007 8:53 AM
Powering Up the Radio
Press the On/Off
Button briefly. You
see Powering Up
on the radio’s
display.
Getting Started
The green LED
blinks and the
Home screen
lights up if the
backlight setting is
set to turn on
automatically.
Adjusting the Volume
To increase the
volume, turn the
Volume Knob
clockwise.
On/Off Button
P1
P2
MENU
OK
A brief tone sounds, indicating that the power up test is
successful.
NOTE: There is no power up tone if the radio tones/alerts
function is disabled (see Turning Radio Tones/Alerts
On or Off on page 41).
If your radio does not power up, contact your dealer.
To turn off the radio, press and hold the On/Off Button until you
see Powering Down on the radio’s display.
English
CH+
CH+
To decrease
CH the volume, turn
this knob
counterclockwise.
P3
NOTE: The Home screen does not light up during a power up
if the LED indicators are disabled (see Turning the
LED Indicators On or Off on page 42).
2
Volume Knob
BACK
P4
CH P1
P2
P3
MENU
OK
BACK
P4
75D06-A.book Page 3 Thursday, January 4, 2007 8:53 AM
Identifying Radio Controls
1 On/Off Button
Radio Controls You Will Be Using . . . . . . . . . . . . . . . . .
Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . .
Accessing the Preprogrammed Functions. . . . . . . . . . .
Push-To-Talk (PTT) Button . . . . . . . . . . . . . . . . . . . . . .
Switching Between Analog and Digital Mode . . . . . . . .
page 3
page 4
page 5
page 6
page 6
3 Front Button P1*
4 Display
5 Channel Rocker
6 Speaker
Radio Controls You Will Be Using
1
2 3
4
5
7 Front Button P3*
6
8 Front Button P4*
9 Menu Navigation Buttons
10 Front Button P2*
Identifying Radio Controls
2 Volume Knob
Take a moment to review the following:
11 Accessory Connector
12 LED Indicators
CH+
CH P1
P2
12
11 10
* These buttons are programmable.
P3
MENU
OK
9
BACK
P4
8
7
3
English
75D06-A.book Page 4 Thursday, January 4, 2007 8:53 AM
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
• Press – Pressing and releasing rapidly.
• Long press – Pressing and holding for the preprogrammed
duration (between 0.25 seconds and 3.75 seconds).
Identifying Radio Controls
• Hold down – Keeping the button pressed.
Assignable Radio Functions
Contacts – Provides direct access to the Contacts list.
Emergency – Depending on the programming, initiates or
cancels an Emergency Alarm or Call.
Manual Dial
– Initiates a call by keying in any subscriber
ID. Only available with a keypad microphone.
Nuisance Channel Delete – Temporarily removes an
unwanted channel, except for the Selected Channel, from the
scan list. The Selected Channel refers to the user’s selected
zone/channel combination from which scan is initiated.
One Touch Call
– Directly initiates a predefined Group or
Private Call, a Call Alert or a Quick Text message.
4
English
Permanent Monitor – Monitors a selected channel for all radio
traffic until function is disabled.
Radio Check
– Determines if a radio is active in a system.
Radio Enable
enabled.
– Allows a target radio to be remotely
Radio Disable
disabled.
– Allows a target radio to be remotely
Remote Monitor
– Turns on the microphone of a target
radio without it giving any indicators.
Repeater/Talkaround – Toggles between using a repeater and
communicating directly with another radio.
Scan – Toggles scan on or off.
Telemetry Control
remote radio.
Text Messaging
– Controls the Output Pin on a local or
– Selects the Text Message menu.
Zone – Allows selection from a list of zones.
75D06-A.book Page 5 Thursday, January 4, 2007 8:53 AM
Assignable Settings/Utility Functions
Backlight – Controls the backlight intensity.
You can access various radio functions through one of the
following ways:
Horns/Lights – Toggles horns and lights feature on or off.
• A short or long press of the
relevant programmable buttons.
Power Level – Toggles transmit power level between high and
low.
Squelch
tight.
– Toggles squelch level between normal and
OR
• Use the Menu Navigation Buttons as follows:
1 To access the menu, press the
appropriate Menu Scroll button (
the menu functions.
button. Press the
or
) to access
2 To select a function or enter a sub-menu, press the
button.
3 To go back one menu level, or to return to the previous
screen, press the
Identifying Radio Controls
All Tones/Alerts – Toggles all tones on or off.
Accessing the Preprogrammed Functions
button. Long press the
button to return to the Home screen.
The Menu Navigation Buttons are also available on a keypad
microphone (see Using the Keypad on page 45).
NOTE: Your radio automatically exits the menu after a period
of inactivity and returns to your Home screen.
5
English
75D06-A.book Page 6 Thursday, January 4, 2007 8:53 AM
Push-To-Talk (PTT) Button
The PTT button on the side
of the microphone serves
two basic purposes:
• While a call is in
Identifying Radio Controls
progress, the PTT button
allows the radio to
transmit to other radios in
the call.
PTT Button
Press and hold down PTT
button to talk. Release
the PTT button to listen.
The microphone is activated when the PTT button is pressed.
• While a call is not in progress, the PTT button is used to make
a new call (see Making a Voice Call on page 12).
6
English
If the Talk Permit Tone is enabled (see Turning the Talk
Permit Tone On or Off on page 42), wait until the short
alert tone ends before talking.
Switching Between Analog and Digital
Mode
Each channel in your
radio can be
configured as an
analog channel or a
digital channel. Use
the Channel Rocker
to switch between an
P 1 or a digital
analog
OK
MENU
channel.
P2
Channel Rocker
CH+
CH P3
BACK
P4
When switching from digital to analog mode, certain features
are unavailable. Icons for the digital features (such as
Messages) reflect this change by appearing “grayed out’.
Disabled features are hidden in the menu.
Your radio also has features available in both analog and digital
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
NOTE: Your radio also switches between digital and analog
modes during a dual mode scan (see Scan on
page 20).
75D06-A.book Page 7 Thursday, January 4, 2007 8:53 AM
Power Level
Radio is set at Low power.
Identifying Status Indicators
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio Tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
page 7
page 8
page 8
page 9
Display Icons
The liquid crystal display (LCD) of your radio shows the radio
status, text entries, and menu entries.
or
Radio is set at High power.
Emergency
Radio is in Emergency mode.
Monitor
Selected channel is being monitored.
Scan
Scan feature is activated.
Priority Scan
Radio detects activity on channel/group designated
as Priority 1 (if is blinking) or Priority 2 (if is
steady).
•
•
Talkaround
In the absence of a repeater, radio is currently
configured for direct radio to radio communication.
Identifying Status Indicators
Your radio indicates its operational status through the following:
Unread Message
User has unread message(s) in the Inbox.
The following are the icons that appear on the radio’s display.
Received Signal Strength Indicator (RSSI)
The number of bars displayed represents the radio
signal strength. Four bars indicates the strongest
signal. This icon is only displayed while receiving.
Inbox Full
User’s Inbox is full.
7
English
75D06-A.book Page 8 Thursday, January 4, 2007 8:53 AM
Tones Disable
Tones are turned off.
GPS Available
The GPS feature is enabled. Blinks when receiving
data from the satellite.
Identifying Status Indicators
GPS Not Available/Out of Range
The GPS feature is enabled but is not receiving data
from the satellite.
Call Icons
The following icons appear on the radio’s display during a call.
These icons also appear in the Contacts list to indicate alias or
ID type.
8
English
Private Call
Indicates a Private Call in progress. In the Contacts
list, it indicates a subscriber alias (name) or ID
(number).
Group Call/All Call
Indicates a Group Call or All Call in progress. In the
Contacts list, it indicates a group alias (name) or ID
(number).
LED Indicators
LED indicators show
the operational status
of your radio.
Blinking red – Radio
is receiving an
Emergency
transmission or has
failed the self-test upon
powering up.
Red
Yellow
Green
Solid yellow – Radio
is receiving a request
for a Private Call, or
monitoring a channel.
P1
P2
Blinking yellow – Radio is scanning for activity or receiving a
Call Alert.
Solid green – Radio is transmitting.
Blinking green – Radio is powering up or receiving a call.
MENU
OK
BACK
75D06-A.book Page 9 Thursday, January 4, 2007 8:53 AM
Audio Tones
Receiving and Making Calls
Continuous Tone
Periodic Tone
A monotone sound. Sounds
continuously until termination.
Sounds periodically depending on the
duration set by the radio. Tone starts,
stops, and repeats itself.
Repetitive Tone
A single tone that repeats itself until it is
terminated by the user.
Momentary Tone
Sounds only once for a short period of
time defined by the radio.
Once you understand how your MOTOTRBO Mobile is
configured, you are ready to use your radio.
Use this navigation guide to familiarize yourself with the basic
Call features:
Selecting a Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Selecting a Radio Channel, Subscriber Alias or ID,
or Group Alias or ID . . . . . . . . . . . . . . . . . . . . . . . . . page 10
Receiving and Responding to a Voice Call . . . . . . . . . page 10
Making a Voice Call . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12
Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Permanent Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15
Selecting a Zone
A zone is a group of channels. Your radio supports up to a
maximum of 50 zones.
Receiving and Making Calls
Alert tones provide you with audible indications of the radio’s
status or the radio’s response to data received.
9
English
75D06-A.book Page 10 Thursday, January 4, 2007 8:53 AM
Use the following procedure to select a zone.
Receiving and Responding to a Voice Call
Receiving and Making Calls
Procedure:
Press the preprogrammed Zone button and proceed to step 3.
OR
Follow the procedure below.
10
1
to access the menu.
2
or
calls.
to Zone and press
to select.
3 The current zone is displayed and indicated by a .
4
or
to the required zone and press
to select.
5 The display shows <Zone> Selected momentarily and
returns to the selected zone screen.
Selecting a Radio Channel, Subscriber
Alias or ID, or Group Alias or ID
Procedure:
Once the required
zone is displayed (if
you have multiple
zones in your radio),
press the Channel
Rocker to select the
P1
channel,
subscriber
alias
or group OK
P2 or ID, MENU
alias or ID.
English
Once the channel, subscriber
alias or ID, or group alias or ID
is displayed, you can proceed
to receive and respond to
Channel Rocker
The green LED lights up
while the radio is transmitting
and blinks when the radio is
receiving.
Green
LED
P1
P2
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio must be
configured as part of that group.
Procedure:
When you receive a Group Call (while on the Home screen):
1 The green LED blinks.
2 The first line of the display shows the caller alias or ID, and
CH+
CH -
the RSSI icon. The second line displays the group alias or
ID, and the Group Call icon (in Digital mode only).
3 Press the PTT button to respond to the call. The green LED
P3
BACK
P4
lights up.
MENU
OK
BACK
75D06-A.book Page 11 Thursday, January 4, 2007 8:53 AM
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
6 If there is no voice activity for a predetermined period of
time, the call ends.
See Making a Group Call on page 12 for details on making a
Group Call.
NOTE: If the radio receives a Group Call while not on the
Home screen, it remains on its current screen prior to
answering the call.
1 Depending on how your radio is programmed:
The yellow LED lights up momentarily. Then, the green LED
blinks.
OR
The green LED blinks.
2 The first line of the display shows the subscriber alias or ID,
and the RSSI icon. The second line displays Private Call
and the Private Call icon.
3 Press the PTT button to respond to the call. The green LED
lights up.
Long press the
button to go to Home screen to
view the caller alias before replying.
4 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
Receiving and Responding to a Private Call
A Private Call is a call from an individual radio to another
individual radio.
There are two types of Private Calls. The first type, where a
radio presence check is performed prior to setting up the call,
while the other sets up the call immediately.
When your radio is checked, the yellow LED lights up
momentarily. Only one of these call types can be programmed
to your radio by your dealer.
5 Release the PTT button to listen.
6 If there is no voice activity for a predetermined period of
Receiving and Making Calls
5 Release the PTT button to listen.
Procedure:
When you receive a Private Call:
time, the call ends.
7 You hear a short tone. The display shows Call Ended.
See Making a Private Call on page 13 for details on making a
Private Call.
11
English
75D06-A.book Page 12 Thursday, January 4, 2007 8:53 AM
Receiving an All Call
An All Call is a call from an individual radio to every radio on the
channel. It is used to make important announcements requiring
the user’s full attention.
Procedure:
When you receive an All Call:
1 A tone sounds and the green LED blinks.
Receiving and Making Calls
2 The first line of the display shows the caller alias, and the
RSSI icon. The second line displays All Call and the All
Call icon.
3 Once the All Call ends, the radio returns to the previous
screen before receiving the call.
You cannot respond to an All Call.
See Making an All Call on page 13 for details on making an All
Call.
NOTE: The radio stops receiving the All Call if you switch to a
different channel while receiving the call.
During an All Call, you will not be able to continue with
any menu navigation or editing until the call ends.
12
English
Making a Voice Call
You can select a channel, subscriber alias or ID, or group alias
or ID by using:
• The Channel Rocker
• A preprogrammed One Touch Call button
• The Contacts list (see Contacts Settings on page 23)
• Manual Dial (via Contacts) – This method is for Private Calls
only and is dialed using a keypad microphone (see Making a
Private Call by Manual Dial on page 48)
Making a Voice Call with the Channel Rocker
Making a Group Call
To make a call to a group of users, your radio must be
configured as part of that group.
Procedure:
1 Press the Channel Rocker to select the channel with the
active group alias or ID.
2 Press the PTT button to make the call. The green LED lights
up. The display shows the group alias or ID, and the Group
Call icon.
75D06-A.book Page 13 Thursday, January 4, 2007 8:53 AM
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
responds, the green LED blinks. You see the Group Call
icon, the group alias or ID, and transmitting radio alias
or ID on your display.
5 If there is no voice activity for a predetermined period of
time, the call ends.
6 Radio returns to the previous screen you were on prior to
receiving the call.
You can also make a Group Call via Contacts (see Making a
Group Call from Contacts on page 23).
Making a Private Call
Procedure:
1 Press the Channel Rocker to select the channel with the
active subscriber alias or ID.
2 Press the PTT button to make the call. The green LED lights
responds, the green LED blinks.
5 If there is no voice activity for a predetermined period of
time, the call ends.
6 You hear a short tone. The display shows Call Ended.
You can also make a Private Call via Contacts (see Making a
Private Call from Contacts on page 23), manually dial a
Private Call (see Making a Private Call by Manual Dial on
page 48) or perform a quick alphanumeric search for the
required target alias via a keypad entry (see Making a Private
Call by Alias Search on page 48).
Making an All Call
This feature allows you to transmit to all users on the channel.
Your radio must be programmed to allow you to use this feature.
Procedure:
1 Press the Channel Rocker to select the channel with the
active All Call group alias or ID.
up. The first line displays the subscriber alias or ID. The
second line displays Private Call and the Private Call
icon.
2 Press the PTT button to make the call. The green LED lights
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
Receiving and Making Calls
4 Release the PTT button to listen. When the target radio
4 Release the PTT button to listen. When the target radio
up. The display shows the All Call group alias or ID, and the
All Call icon.
clearly into the microphone.
Users on the channel cannot respond to an All Call.
13
English
75D06-A.book Page 14 Thursday, January 4, 2007 8:53 AM
Making a Group or Private Call with the One Touch
Call Button
The One Touch Call feature allows you to make a Group or
Private Call to a predefined alias or ID easily. This feature can
be assigned to a short or long programmable button press.
Receiving and Making Calls
You can ONLY have one alias or ID assigned to a One Touch
Call button. Your radio can have multiple One Touch Call
buttons programmed.
14
Procedure:
Talkaround
You can continue to communicate when your repeater is not
operating, or when your radio is out of the repeater’s range but
within talking range of other radios. This is called “talkaround”.
Procedure:
Press the preprogrammed Repeater/Talkaround button to
toggle between talkaround and repeater modes.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Utilities and press
2 Press the PTT button to make the call. The green LED lights
3
or
to Radio Settings and press
up. The display shows the group/subscriber alias or ID, and
the Group/Private Call icon.
4
or
to Talkaround and press
1 Press the preprogrammed One Touch Call button to make
a Group or Private Call to the predefined alias or ID.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
5 If there is no voice activity for a predetermined period of
time, the call ends.
6 Radio returns to the screen you were on prior to receiving
the call.
For a Private Call, you hear a short tone when the call ends.
English
to select.
to select.
to select.
5 You see Turn On if the radio is currently in Repeater mode.
OR
You see Turn Off if the radio is currently in Talkaround
mode.
6 Press
to select.
7 The display shows Talkaround On.
OR
The display shows Talkaround Off.
8 The screen automatically returns to the previous menu.
The Talkaround setting is retained even after powering down.
75D06-A.book Page 15 Thursday, January 4, 2007 8:53 AM
Permanent Monitor
Procedure:
1 Press the preprogrammed Permanent Monitor button.
2 Radio sounds an alert tone, the yellow LED lights up, and
the display shows Permanent Monitor On. The monitor
icon appears on the display.
3 Press the preprogrammed Permanent Monitor button to
exit Permanent Monitor mode.
4 Radio sounds an alert tone, the yellow LED turns off, and
display shows Permanent Monitor Off.
Advanced Features
Use this navigation guide to learn more about advanced
features available with your mobile:
Radio Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15
Remote Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17
Scan Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23
Call Indicator Settings . . . . . . . . . . . . . . . . . . . . . . . . . page 24
Call Log Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 26
Call Alert Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . page 28
Emergency Operation . . . . . . . . . . . . . . . . . . . . . . . . . page 29
Text Messaging Features . . . . . . . . . . . . . . . . . . . . . . . page 33
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 37
Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 39
Advanced Features
Use the Permanent Monitor feature to continuously monitor a
selected channel for activity.
Radio Check
If enabled, this feature allows you to determine if another radio
is active in a system without disturbing the user of that radio. No
audible or visual notification is shown on the target radio.
This feature is only applicable for subscriber aliases or IDs.
15
English
75D06-A.book Page 16 Thursday, January 4, 2007 8:53 AM
Sending a Radio Check
3
4
1 Press the preprogrammed Radio Check button
5 The display shows Radio Check: <Subscriber Alias or
or
to the required subscriber alias or ID and press
to select.
3 The display shows Radio Check: <Subscriber Alias
or ID>, indicating that Radio Check is in progress. The
green LED lights up.
4 Wait for acknowledgement.
5 If the target radio is active in the system, a tone sounds and
Advanced Features
to the required subscriber alias or ID and press
Procedure:
Using the preprogrammed Radio Check button.
2
16
or
to select.
the display briefly shows Target Radio Available.
OR
If the target radio is not active in the system, a tone sounds
and the display briefly shows Target Radio Not
Available.
6 Radio returns to the subscriber alias or ID screen.
Procedure:
Using the menu.
to access the menu.
2
or
English
to Contacts and press
to Radio Check and press
to select.
ID>, indicating that Radio Check is in progress. The green
LED lights up.
6 Wait for acknowledgement.
7 If the target radio is active in the system, a tone sounds and
the display briefly shows Target Radio Available.
OR
If the target radio is not active in the system, a tone sounds
and the display briefly shows Target Radio Not
Available.
8 Radio returns to the subscriber alias or ID screen.
If the
button is pressed when the radio is waiting for
acknowledgement, a tone sounds, and the radio terminates all
retries and exits Radio Check mode.
You can also initiate Radio Check via manual dial (see
Initiating a Radio Check by Manual Dial on page 46).
OR
1
or
to select.
75D06-A.book Page 17 Thursday, January 4, 2007 8:53 AM
Remote Monitor
6 If successful:
Your radio must be programmed to allow you to use this feature.
Initiating Remote Monitor
Procedure:
Using the preprogrammed Remote Monitor button.
OR
1 Press the preprogrammed Remote Monitor button.
Procedure:
Using the menu.
2
1
to access the menu.
2
or
to Contacts and press
3
or
to the required subscriber alias or ID and press
or
to the required subscriber alias or ID and press
to select.
3 Radio sounds an alert tone and the green LED blinks.
4 Wait for acknowledgment.
5 The display shows Remote Monitor Successful.
OR
The display shows Remote Monitor Failed.
Advanced Features
The radio starts receiving audio from the monitored radio for
a preprogrammed duration.
Once the timer expires, the radio sounds an alert tone and
the green LED turns off. The display shows Remote
Monitor Ended.
OR
If unsuccessful:
The radio repeats the attempt until the preprogrammed
number of tries expires.
Use the Remote Monitor feature to turn on the microphone of a
target radio (subscriber IDs only). No audible or visual indication
is given to the target radio. You can use this feature to monitor,
remotely, any audible activity surrounding the target radio.
to select.
to select.
4
or
to Remote Mon. and press
to select.
5 Radio sounds an alert tone and the green LED blinks.
6 Wait for acknowledgment.
17
English
75D06-A.book Page 18 Thursday, January 4, 2007 8:53 AM
7 The display shows Remote Monitor Successful.
OR
The display shows Remote Monitor Failed.
8 If successful:
Advanced Features
The radio starts receiving audio from the monitored radio for
a preprogrammed duration.
Once the timer expires, the radio sounds an alert tone and
the green LED turns off. The display shows Remote
Monitor Ended.
OR
If unsuccessful:
The radio repeats the attempt until the preprogrammed
number of tries expires.
You can also manually select a target radio address (see
Initiating Remote Monitor by Manual Dial on page 47).
18
English
Scan Lists
Scan lists are created and assigned to individual channels/
groups. Your radio scans for voice activity by cycling through the
channel/group sequence specified in the scan list for the current
channel/group.
Your radio can support up to 32 scan lists, with a maximum of
16 members in a list. Each scan list supports a mixture of both
analog and digital entries.
You can add, delete, or prioritize
scan list.
channels by editing a
Viewing an Entry in the Scan List
Procedure:
1
to access the menu.
2
or
to Scan and press
3
or
to View/Edit List and press
4 Use
or
to select.
to select.
to view each member on the list.
The priority icon appears left of the member’s alias, if set,
to indicate whether the member is on a Priority 1 or Priority
2 channel list. You cannot have multiple Priority 1 or
Priority 2 channels in a scan list.
There is no priority icon if priority is set to None.
75D06-A.book Page 19 Thursday, January 4, 2007 8:53 AM
Editing the Scan List
Deleting an Entry from the Scan List
1
to access the menu.
2
or
to Scan and press
3
or
to View/Edit List and press
4
or
to the required alias or ID and press
5
or
to Delete? and press
Procedure:
1
to access the menu.
2
or
to Scan and press
3
or
to View/Edit List and press
4
or
to Add Member and press
5
or
to the required alias or ID and press
6
or
to the required priority level (Priority 1 or Priority 2
to select.
to select.
to select.
to select.
is ONLY applicable when in Analog mode) and press
select.
to
7 The display shows Entry Saved, followed immediately by
Add Another?.
8
or
to Yes and press
to select, to add another
entry, and repeat steps 5 and 6.
OR
or
to No and press
to select to save the current
list.
to select.
to select.
to select.
to select.
6 At Delete Entry?,
or
to Yes and press
to
select, to delete the entry. The display shows Entry
Deleted.
OR
or
to No and press
to select to return to the
previous screen.
Advanced Features
Procedure:
Adding a New Entry to the Scan List
7 Repeat steps 4 to 6 to delete other entries.
After deleting all required aliases or IDs, long press
return to the Home screen.
to
19
English
75D06-A.book Page 20 Thursday, January 4, 2007 8:53 AM
Setting and Editing Priority for an Entry in the Scan
Scan
List
When you start a scan, your radio cycles through the
preprogrammed scan list for the current channel looking for
voice activity.
Advanced Features
Procedure:
1
to access the menu.
2
or
to Scan and press
3
or
to View/Edit List and press
4
or
to the required alias or ID and press
5
or
to Edit Priority? and press
6
or
to the required priority level (Priority 1 or Priority 2
The yellow LED blinks and you see the scan icon on the display.
to select.
to select.
to select.
to select.
is ONLY applicable when in Analog mode) and press
select.
7 The display shows Entry Saved before returning to the
previous screen.
8 The priority icon appears left of the member’s name.
There is no priority icon if priority is set to None.
20
English
During a dual mode scan, if you are on a digital channel, and
your radio locks onto an analog channel, it automatically
switches from digital mode to analog mode for the duration of
the call. This is also true for the reverse.
There are two ways of initiating scan:
to
• Main Channel Scan (Manual): Your radio scans all the
channels/groups in your scan list. On entering scan, your
radio may – depending on the settings – automatically start
on the last scanned “active” channel/group or on the channel
where scan was initiated.
• Auto Scan (Automatic): Your radio automatically starts
scanning when you select a channel/group that has Auto
Scan enabled.
75D06-A.book Page 21 Thursday, January 4, 2007 8:53 AM
Responding to a Transmission During a Scan
Procedure:
Press the preprogrammed Scan button to start or stop Scan.
OR
Follow the procedure below.
During scanning, your radio stops on a channel/group where
activity is detected. The radio stays on that channel for a
preprogrammed time period known as “hang time”.
1 Use the Channel Rocker to select a channel
preprogrammed with a scan list.
2
to access the menu.
3
or
to Scan and press
1 Press the PTT button during hang time. The green LED
lights up.
2 Wait for the Talk Permit Tone to finish (if enabled) and speak
to select.
4 The display shows Turn On if scan is disabled.
OR
The display shows Turn Off if scan is enabled.
5 Press
Procedure:
clearly into the microphone.
3 Release the PTT button to listen.
4 If you do not respond within the hang time, the radio returns
Advanced Features
Starting and Stopping Scan
to scanning other channels/groups.
to select.
6 The yellow LED blinks and the scan icon is displayed when
Scan is enabled.
OR
The LED turns off and the scan icon is not displayed when
Scan is disabled.
While scanning, the radio will only accept data (e.g. text
message, location, telemetry, or PC data) if received on its
Selected Channel.
21
English
75D06-A.book Page 22 Thursday, January 4, 2007 8:53 AM
Deleting a Nuisance Channel
Restoring a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
Procedure:
To restore the deleted nuisance channel, do one of the
following:
This capability does not apply to the channel designated as the
Selected Channel.
• Power the radio off and then powering it on again, OR
Procedure:
1 When your radio “locks on to” an unwanted or nuisance
channel, press the preprogrammed Nuisance Channel
Delete button until you hear a tone.
2 Release the Nuisance Channel Delete button. The
Advanced Features
nuisance channel is deleted.
Deleting a “nuisance” channel is only possible through the
preprogrammed Nuisance Channel Delete button. This feature
is not accessible through the menu.
22
English
• Stop and restart a scan via the preprogrammed Scan button
or menu, OR
• Change the channel via the Channel Rocker.
75D06-A.book Page 23 Thursday, January 4, 2007 8:53 AM
Contacts Settings
Additionally, each entry, depending on context, associates with
one of five types of calls: Group Call, Private Call, All Call, PC
Call or Dispatch Call.
Procedure:
1
2
3
to access the menu.
or
to Contacts and press
are alphabetically sorted.
or
to select.The entries
to the required group alias or ID.
PC Call and Dispatch Call are data-related. They are only
available with the applications. Refer to the data applications
documentation for further details.
4 Press the PTT button to make the call. The green LED lights
Your radio supports two Contacts lists, one for Analog contacts
(with a maximum of 128 members) and one for Digital contacts
(with a maximum of 256 members).
5 Wait for the Talk Permit Tone to finish (if enabled) and speak
up. The display shows the group alias or ID, and the Group
Call icon.
clearly into the microphone.
6 Release the PTT button to listen. When any user in the
Each entry within Contacts displays the following information:
group responds, the green LED blinks. You see the Group
Call icon, the group alias or ID, and that user’s alias or ID
on your display.
• Call Type
• Call Alias
7 If there is no voice activity for a preprogrammed period of
• Call ID
NOTE: You can add, delete, or edit subscriber aliases or IDs
for the Digital Contacts list.
For the Analog Contacts list, you can only view the list
and initiate a Call Alert. Adding, deleting, and editing
capabilities can only be performed by your dealer.
Advanced Features
Contacts provides “address-book” capabilities on your mobile.
Each entry corresponds to an alias or ID that you use to initiate
a call.
Making a Group Call from Contacts
time, the call ends.
Making a Private Call from Contacts
Procedure:
1
to access the menu.
23
English
75D06-A.book Page 24 Thursday, January 4, 2007 8:53 AM
2
or
to Contacts and press
are alphabetically sorted.
3
or
Call Indicator Settings
to select.The entries
to the required subscriber alias or ID.
Activating and Deactivating Call Ringers for
Private Calls
4 Press the PTT button to make the call. The green LED lights
up. The first line displays the subscriber alias or ID. The
second line displays Private Call and the Private Call
icon.
5 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
6 Release the PTT button to listen. When the target radio
Advanced Features
responds, the green LED blinks and the display shows the
transmitting user's alias or ID.
7 If there is no voice activity for a preprogrammed period of
time, the call ends.
8 You hear a short tone. The display shows Call Ended.
NOTE: If you release the PTT button while the radio is setting
up the call, it exits without any indication and returns to
the previous screen.
24
English
Your radio may be programmed to perform a radio
presence check prior to setting up the Private Call. If
the target radio is not available, you hear a short tone
and see Party Not Available on the display.
The radio returns to the menu prior to initiating the
radio presence check.
You can turn on or off the ringing tones for a received Private
Call.
Procedure:
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Tones/Alerts and press
to select.
5
or
to Call Ringers and press
to select.
6
or
to Private Call and press
to select.
7 The display shows Turn On. Press
to select.
to select.
to enable Call
Ringers for Private Calls. The display shows Private Call
Ringer On.
OR
The display shows Turn Off. Press
to disable Call
Ringers for Private Calls. The display shows Private Call
Ringer Off.
75D06-A.book Page 25 Thursday, January 4, 2007 8:53 AM
Activating and Deactivating Call Ringers for Text
Messaging
Assigning Ring Styles
You can program your radio to sound one of ten predefined
ringing tones when receiving a Call Alert or a Text Message
from a particular contact.
Procedure:
Procedure:
1
to access the menu.
1
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Tones/Alerts and press
to select.
5
or
to Call Ringers and press
to select.
6
or
to Text Message and press
to select.
to select.
to select.
7 The current tone is indicated by a .
8
or
to the preferred tone and press
to select. The
display shows Tone <Number> Selected and a appears
left of the selected tone.
OR
or
to Turn Off and press
to select. The display
shows Text Message Ringer Off and a appears left of
Turn Off.
2
to access the menu.
or
to Contacts and press
are alphabetically sorted.
to select.The entries
3
or
to the required alias or ID and press
4
or
to Ring Style and press
to select.
to select.
Advanced Features
You can turn on or off the ringing tones for a received Text
Message.
5 A indicates the current selected tone.
6
or
to the required tone and press
to select.
7 The display shows Contact Saved.
The radio sounds out each ring style as you navigate through
the list.
25
English
75D06-A.book Page 26 Thursday, January 4, 2007 8:53 AM
Advanced Features
Escalating Alarm Tone Volume
Call Log Features
You can program your radio to continually alert you when a
radio call remains unanswered. This is done by automatically
increasing the alarm tone volume over time. This feature is
known as Escalert.
Your radio keeps track of all recent outgoing, answered, and
missed Private Calls. Use the call log feature to view and
manage recent calls.
Procedure:
You can perform the following tasks in each of your call lists:
1
to access the menu.
• Store alias or ID to Contacts
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Tones/Alerts and press
5
or
to Escalert and press
6 The display shows Turn On. Press
The display shows Escalert On.
OR
The display shows Turn Off. Press
The display shows Escalert Off.
26
English
to select.
to select.
to select.
to select.
to enable Escalert.
to disable Escalert.
• Delete
Viewing Recent Calls
The lists are Missed, Answered, and Outgoing.
Procedure:
1
to access the menu.
2
or
to Call Log and press
3
or
to preferred list and press
to select.
to select.
4 The display shows the most recent entry at the top of the
list.
5
or
to view the list.
Press the PTT button to start a Private Call with the current
selected alias or ID.
75D06-A.book Page 27 Thursday, January 4, 2007 8:53 AM
Deleting a Call from a Call List
Whenever a call is missed, your radio displays a missed call
message. Select View? to view it immediately or View Later?
to view at a later time.
Procedure:
1
to access the menu.
NOTE: The radio exits the Missed Call screen and sets up a
Private Call if you press the PTT button while viewing
a missed call number.
2
or
to Call Log and press
3
or
to the required list and press
Procedure:
4
or
to the required alias or ID and press
1 The display shows Missed Calls, along with the number of
5
or
to Delete Entry? and press
6
or
to Yes and press
calls missed and View?.
2 Press
to view the missed call alias or ID. The missed
call log list appears on display.
Press
to store or delete the entry.
OR
or
to View Later? and press
return to the Home screen.
to select.
to select.
to select.
to select.
to select.
7 The display shows Entry Deleted.
Advanced Features
Missed Call Screen
The display shows List Empty when you select a call list and it
contains no entries.
to select. You
To store/save an alias or ID from the Missed Call list, see
Storing an Alias or ID from the Missed Call List on page 49.
27
English
75D06-A.book Page 28 Thursday, January 4, 2007 8:53 AM
Call Alert Operation
Call Alert paging enables you to alert a specific radio user to call
you back when they are able to do so.
This feature is applicable for subscriber aliases or IDs only and
is accessible through the menu via Contacts or manual dial.
Making a Call Alert from the Contacts List
Procedure:
1
to access the menu.
2
or
to Contacts and press
3
or
to the required subscriber alias or ID and press
Receiving and Acknowledging a Call Alert
When you receive a Call Alert page, you see Call Alert that
alternates with the alias or ID of the calling radio on the display.
Procedure:
Advanced Features
2 Press and release the PTT button to acknowledge the alert.
OR
28
English
to select.
4
or
to Call Alert and press
to select.
5 The display shows Call Alert: <Subscriber Alias or
ID>, indicating that the Call Alert has been sent.
1 You hear a repetitive tone. The yellow LED blinks.
Press
to select.
to exit the Call Alert.
6 The green LED lights up when your radio is sending the Call
Alert.
7 If the Call Alert acknowledgement is received, a tone
sounds and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgement is not received, a tone
sounds and the display shows Call Alert Failed.
You can also send a Call Alert by manually dialing the
subscriber ID (see Sending a Call Alert by Manual Dial on
page 49).
75D06-A.book Page 29 Thursday, January 4, 2007 8:53 AM
Making a Call Alert with the One Touch Call
Button
1 Press the preprogrammed One Touch Call button to make
An Emergency Alarm is used to indicate a critical situation. You
are able to initiate an Emergency at any time on any screen
display even when there is activity on the current channel.
a Call Alert to the predefined alias or ID.
2 The display shows Call Alert: <Subscriber Alias or
ID>, indicating that the Call Alert has been sent.
3 The green LED lights up when your radio is sending the Call
Alert.
4 If the Call Alert acknowledgement is received, a tone
sounds and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgement is not received, a tone
sounds and the display shows Call Alert Failed.
Your radio supports 3 Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
In addition, each alarm has the following types:
Advanced Features
Procedure:
Emergency Operation
• Regular – Radio transmits an alarm signal and shows audio
and/or visual indicators.
• Silent – Radio transmits an alarm signal without any audio or
visual indicators.
Only one of the Emergency Alarms above can be assigned to
the preprogrammed Emergency button or the Emergency
footswitch.
29
English
75D06-A.book Page 30 Thursday, January 4, 2007 8:53 AM
Receiving an Emergency Alarm
Responding to an Emergency Alarm
Procedure:
Procedure:
1 When receiving an Emergency Alarm, the display shows the
When receiving an Emergency Alarm:
Emergency icon, the number of alarms received, and Alarm
Rcvd, which alternates with the alias or ID of the sender.
2 A tone sounds and the red LED blinks.
3 If enabled, your radio automatically acknowledges the
Emergency Alarm.
Advanced Features
When your radio receives an Emergency Alarm, it displays the
Emergency Alarm received indications until acknowledgement
is sent and you exit the Emergency mode.
You will not be able to receive any other indications or displays
for any other calls until you exit the Emergency Alarm received
screen.
NOTE: Short press
, then long press the preprogrammed
Emergency button to clear the Emergency Alarm
received indications and exit Emergency mode.
30
English
1 Press any button to stop all Emergency Alarm received
indications.
2 Press PTT button to initiate a call with the emergency
initiating radio. The green LED lights up. Your radio remains
in the Emergency mode.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen. When the emergency
initiating radio responds, the green LED blinks. You see the
Group Call icon, the group alias or ID, and transmitting radio
alias or ID on your display.
5 Once your call ends, short press
, then long press the
preprogrammed Emergency button to clear the Emergency
Call received indications and exit Emergency mode.
6 The radio returns to the Home screen.
75D06-A.book Page 31 Thursday, January 4, 2007 8:53 AM
Sending an Emergency Alarm with Call
This feature allows you to send an Emergency Alarm, a nonvoice signal, which triggers an alert indication on another radio.
This feature allows you send an Emergency Alarm to another
radio. Upon acknowledgement, both radios can communicate
over a preprogrammed Emergency channel.
Procedure:
1 Press the preprogrammed Emergency button or the
Emergency footswitch.
2 The display shows Sending Alarm, which alternates with
your radio ID. The green LED lights up and the Emergency
icon appears on the Home screen display.
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the green LED blinks. The
display shows Emergency Alarm Successful.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a tone sounds and the display shows
Emergency Alarm Failed.
4 Radio exits the Emergency Alarm mode and returns to the
Home screen.
Procedure:
1 Press the preprogrammed Emergency button or the
Emergency footswitch.
2 The display shows Sending Alarm, which alternates with
your radio ID. The green LED lights up and the Emergency
icon appears on the Home screen display.
3 When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds and the green LED blinks. The
display shows Emergency Alarm Successful.
Advanced Features
Sending an Emergency Alarm
4 Press PTT button to make the call. The green LED lights up
and the group icon appears on the display.
5 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
6 Long press the preprogrammed Emergency button to exit
the Emergency mode.
7 The radio returns to the Home screen.
31
English
75D06-A.book Page 32 Thursday, January 4, 2007 8:53 AM
Sending an Emergency Alarm with Voice to
Follow
Advanced Features
This feature allows you to send an Emergency Alarm to another
radio. Upon acknowledgement, your radio’s microphone is
automatically activated, allowing you to communicate with the
other radio without pressing the PTT.
3 Once the display shows Emergency Alarm Successful,
speak clearly into the microphone. When hot mic has been
enabled, the radio automatically transmits without a PTT
press until the hot mic duration expires.
4 While transmitting, the green LED lights up and the
Emergency icon appears on the display.
This activated microphone state is also known as “hot mic”.
5 Once the hot mic duration expires, the radio automatically
If you press the PTT button during the preprogrammed hot mic
transmission period, the radio ignores the PTT press and
remains in Emergency mode.
If the Emergency Alarm request fails, the radio returns to the
Home screen.
NOTE: If you press the PTT button during hot mic, and
continue to press it after the hot mic duration expires,
the radio continues to transmit until you release the
PTT button.
Procedure:
1 Press the preprogrammed Emergency button or the
Emergency footswitch.
2 The display shows Sending Alarm. The green LED lights
up and the Emergency icon is displayed.
32
English
stops transmitting. To transmit again, press the PTT button.
Reinitiating an Emergency Mode
There are two instances where this can happen:
• You change the channel while the radio is in Emergency
mode. This exits the Emergency mode. If Emergency Alarm is
enabled on this new channel, the radio reinitiates Emergency.
• You press the preprogrammed Emergency button during an
Emergency initiation/transmission state. This causes the
radio to exit this state, and to reinitiate Emergency.
75D06-A.book Page 33 Thursday, January 4, 2007 8:53 AM
Exiting Emergency Mode
Text Messaging Features
Sending a Quick Text Message
• Emergency Alarm acknowledgement is received (for
Your radio supports a maximum of ten (10) Quick Text
messages as programmed by your dealer.
Emergency Alarm only), OR
• All retries to send the alarm have been exhausted, OR
• The preprogrammed Emergency button is long pressed (not
applicable for Emergency Alarm with Voice to Follow).
NOTE: If your radio is powered off, it exits the Emergency
mode. The radio will not reinitiate the Emergency
mode automatically when it is turned on again.
Procedure:
Press the preprogrammed Text Messaging button and proceed
to step 3.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Messages and press
3
or
to Quick Text and press
4
or
to the required Quick Text and press
to select.
5
or
to the required alias or ID and press
to select.
Advanced Features
Your radio exits Emergency mode when one of the following
occurs:
to select.
to select.
6 The display shows Text Message: <Subscriber/Group
Alias or ID>, confirming your message is being sent.
7 If the message is sent successfully, a tone sounds and the
display shows Message Sent.
OR
If the message cannot be sent, the display shows Message
Sent Failed.
33
English
75D06-A.book Page 34 Thursday, January 4, 2007 8:53 AM
Sending a Quick Text Message with the One Touch
Call Button
1 Press the preprogrammed One Touch Call button to send a
predefined Quick Text message to a predefined alias or ID.
2 The display shows Text Message: <Subscriber/Group
Alias or ID>, confirming your message is being sent.
3 If the message is sent successfully, a tone sounds and the
display shows Message Sent.
OR
If the message cannot be sent, the display shows Message
Sent Failed.
Advanced Features
Only applicable when sending to subscriber aliases or IDs:
If the target radio successfully receives the Quick Text
message, a tone sounds and the display shows Message Ack
Rcvd.
OR
If the target radio fails to receive the Quick Text message, a
tone sounds and the display shows Message Ack Failed.
NOTE: While Quick Text messages are preprogrammed, you
can edit each message before sending it (see Editing
a Quick Text Message on page 51).
34
English
Receiving a Text Message
When receiving a message, the display shows the alias or ID of
the sender and the message icon at the far left of the screen.
You can select one of the following options when receiving a
text message:
• Read
• Read Later
• Delete
NOTE: The radio exits the Text Message alert screen and sets
up a Private or Group Call if the PTT button is pressed
when the radio is displaying the alert screen.
Reading a Text Message
Procedure:
1
or
to Read and press
to select.
2 Selected message in the Inbox opens.
3 Press
to return to the Inbox.
OR
Press
to reply, forward, or delete the text message.
Selecting Read Later returns you to the screen you were on
prior to receiving the text message. Selecting Delete deletes
the text message.
75D06-A.book Page 35 Thursday, January 4, 2007 8:53 AM
3
or
to Inbox and press
Use the Inbox to manage your text messages. The Inbox is
capable of storing a maximum of 30 messages.
4
or
to view the messages.
Your radio supports the following options for text messages:
5 Press
to select the current message, and press
again to reply, forward, save, or delete that message.
OR
• Reply (via Quick Text)
Long press
• Forward
• Save
to select.
to return to the Home screen.
Replying to a Text Message with Quick Text
• Delete
• Delete All
Text messages in the Inbox are sorted according to the most
recently received.
NOTE: Press
at any time to return to the previous
Procedure:
Press the preprogrammed Text Messaging button and proceed
to step 3.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Messages and press
Viewing a Text Message from the Inbox
3
or
to Inbox and press
Procedure:
4
or
to the required message and press
1
to access the menu.
5 Press
once more to access the sub-menu.
2
or
6
to Reply and press
screen or long press
screen.
to return to the Home
to Messages and press
to select.
or
Advanced Features
Managing Text Messages
to select.
to select.
to select.
to select.
35
English
75D06-A.book Page 36 Thursday, January 4, 2007 8:53 AM
7
or
to Quick Text and press
8
or
to the required message and press
Deleting a Text Message from the Inbox
to select.
to select.
9 The display shows Text Message: <Subscriber/Group
Alias or ID>, confirming your message is being sent.
10 If the message is sent successfully, a tone sounds and the
display shows Message Sent.
OR
If the message cannot be sent, the display shows Message
Sent Failed.
Advanced Features
Only applicable when sending to subscriber aliases or IDs:
If the target radio successfully receives the Quick Text
message, a tone sounds and the display shows Message Ack
Rcvd.
OR
If the target radio fails to receive the Quick Text message, a
tone sounds and the display shows Message Ack Failed.
NOTE: If you are using a keypad microphone, you can also
write and send a new message (see Writing and
Sending a Text Message on page 50) or modify a
Quick Text message before sending it (see Editing a
Quick Text Message on page 51).
36
English
Procedure:
Press the preprogrammed Text Messaging button and proceed
to step 3.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Messages and press
3
or
to Inbox and press
4
or
to the required message and press
5 Press
once more to access the sub-menu.
6
to Delete and press
or
7 At Delete Message?,
or
to select.
to select.
to select.
to Yes and press
select.
8 The display shows Message Deleted.
9 The screen returns to the Inbox.
to select.
to
75D06-A.book Page 37 Thursday, January 4, 2007 8:53 AM
Deleting All Text Messages from the Inbox
Security
1
to access the menu.
2
or
to Messages and press
3
or
to Inbox and press
4
or
to Delete All and press
5 At Delete Message?,
or
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled.
Radio Disable
to select.
Procedure:
Using the preprogrammed Radio Disable button.
to select.
to select.
to Yes and press
You can enable or disable any radio in the system. For example,
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered.
1 Press the preprogrammed Radio Disable button.
to
select.
6 The display shows Inbox Cleared.
The display shows List Empty when you select the Inbox and
it contains no text messages.
NOTE: Additional text messaging features are available with a
keypad-enabled microphone. Refer to Text
Messaging on page 50 for more details.
2
or
Advanced Features
Procedure:
Press the preprogrammed Text Messaging button and proceed
to step 3.
OR
Follow the procedure below.
to the required subscriber alias or ID and press
to select.
3 The display shows Radio Disable: <Subscriber Alias
or ID> and the green LED lights up.
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.
37
English
75D06-A.book Page 38 Thursday, January 4, 2007 8:53 AM
OR
Radio Enable
Procedure:
Using the menu.
Procedure:
Using the preprogrammed Radio Enable button.
1
1 Press the preprogrammed Radio Enable button.
2
to access the menu.
or
to Contacts and press
are alphabetically sorted.
3
or
to select. The entries
2
or
to Radio Disable and press
green LED blinks.
3 The display shows Radio Enable: <Subscriber Alias
or ID> and the green LED lights up.
to select. The
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display shows Radio
Advanced Features
5 The display shows Radio Disable: <Subscriber Alias
38
Enable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Enable Failed.
or ID> and the green LED lights up.
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.
Do not press
during the Radio Disable operation as you
will not get an acknowledgement message.
You can also access this feature using manual dial (see Radio
Disable via Manual Dial on page 52).
English
to the required subscriber alias or ID and press
to select.
to the required subscriber alias or ID and press
to select.
4
or
OR
Procedure:
Using the menu.
1
2
to access the menu.
or
to Contacts and press
are alphabetically sorted.
to select. The entries
75D06-A.book Page 39 Thursday, January 4, 2007 8:53 AM
3
or
Utilities
to the required subscriber alias or ID and press
to select.
or
to Radio Enable and press
green LED blinks.
to select. The
5 The display shows Radio Enable: <Subscriber Alias
or ID> and the green LED lights up.
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display shows Radio
Enable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Enable Failed.
Do not press
during the Radio Enable operation as you
will not get an acknowledgement message.
You can also access this feature using manual dial (see Radio
Enable via Manual Dial on page 53).
Setting the Squelch Level
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
Press the preprogrammed Squelch button to toggle squelch
level between normal and tight.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Squelch and press
Advanced Features
4
to select.
to select.
to select.
5 Choose either Tight or Normal and press
to select.
6 Screen returns to the previous menu.
39
English
75D06-A.book Page 40 Thursday, January 4, 2007 8:53 AM
Setting the Power Level
Controlling the Display Backlight
You can customize your radio’s power setting to high or low for
each channel.
You can set the radio’s display backlight intensity to either Low,
Medium, High, or Off, to light up the display and the Menu
Navigation Buttons backlighting accordingly. The setting also
affects the keypad backlighting on a keypad microphone.
Settings: High enables communication with radios located at
a considerable distance from you. Low enables communication
with radios in closer proximity.
Advanced Features
Procedure:
Press the preprogrammed Power Level button to toggle
transmit power level between high and low.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Power and press
to select.
to select.
to select.
5 Change your current setting as prompted on the display.
6 Press
40
English
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Backlight and press
to return to the Home screen. The power level
to select.
to select.
to select.
5 A indicates the current setting.
6
to select a new power level.
7 Screen returns to the previous menu.
Long press
icon is visible.
Procedure:
Press the preprogrammed Backlight button to set the backlight
intensity. Each press changes the display backlight setting to a
new setting.
OR
Follow the procedure below.
or
to the required setting and press
to select.
7 The display lights up accordingly and the screen returns to
the previous menu.
The display backlight, buttons and/or keypad backlighting are
automatically turned off if the LED indicators are disabled (see
Turning the LED Indicators On or Off on page 42).
75D06-A.book Page 41 Thursday, January 4, 2007 8:53 AM
Turning Radio Tones/Alerts On or Off
Your radio is able to notify you of an incoming call via the horns
and lights feature. When activated, an incoming call sounds
your vehicle's horn and turns on its lights.
You can enable and disable all radio tones and alerts (except for
the incoming Emergency alert tone) if needed.
This feature needs to be installed through your radio’s rear
accessory connector by your dealer.
Procedure:
Press the preprogrammed Horns/Lights button to toggle horns
and lights feature on or off.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Horns/Lights and press
5 The display shows Turn On. Press
to select.
to select.
to select.
to enable the horns
and lights feature. The display shows Horns and Lights
On.
OR
The display shows Turn Off. Press
to disable the
horns and lights feature. The display shows Horns and
Lights Off.
Procedure:
Press the preprogrammed All Tones/Alerts button to toggle all
tones on or off.
OR
Follow the procedure below.
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Tones/Alerts and press
5
or
to All Tones and press
to select.
to select.
Advanced Features
Turning Horns/Lights On or Off
to select.
to select.
6 The display shows Turn On. Press
to enable all tones
and alerts. The display shows All Tones On.
OR
The display shows Turn Off. Press
to disable all tones
and alerts. The display shows All Tones Off.
41
English
75D06-A.book Page 42 Thursday, January 4, 2007 8:53 AM
Turning the Talk Permit Tone On or Off
Turning the LED Indicators On or Off
You can enable and disable the Talk Permit Tone if needed.
You can enable and disable the LED Indicators if needed.
Procedure:
Procedure:
1
to access the menu.
1
to access the menu.
2
or
to Utilities and press
2
or
to Utilities and press
3
or
to Radio Settings and press
3
or
to Radio Settings and press
4
or
to Tones/Alerts and press
4
or
to LED Indicator and press
5
or
to Talk Permit and press
to select.
to select.
to select.
to select.
Advanced Features
6 Select Turn On. Press
to enable the Talk Permit Tone.
The display shows Talk Permit Tone On.
OR
Select Turn Off. Press
to disabled the Talk Permit
Tone. The display shows Talk Permit Tone Off.
42
English
to select.
to select.
to select.
5 Select Turn On. Press
to enable the LED Indicators.
The display shows All LEDs On.
OR
Select Turn Off. Press
to disable the LED Indicators.
The display shows All LEDs Off.
The display backlight, buttons and/or keypad backlighting are
automatically turned off if the LED Indicators are disabled (see
Controlling the Display Backlight on page 40).
75D06-A.book Page 43 Thursday, January 4, 2007 8:53 AM
Accessing General Radio Information
You can enable and disable the Introduction Screen if needed.
Your radio contains information on the following:
Procedure:
• Radio ID
1
to access the menu.
• Software Version
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Intro Screen and press
to select.
to select.
• Codeplug Version
NOTE: Press
or long press
to select.
5 The display shows Turn On. Press
to enable the
Introduction Screen. The display shows Intro Screen On.
OR
The display shows Turn Off. Press
to disable the
Introduction Screen. The display shows Intro Screen
Off.
at any time to return to the previous screen
to return to the Home screen.
Checking the Radio ID
Displays the ID of your radio.
Advanced Features
Turning the Introduction Screen On or Off
Procedure:
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Info and press
4
or
to My Number and press
to select.
to select.
to select.
5 The radio ID is displayed.
43
English
75D06-A.book Page 44 Thursday, January 4, 2007 8:53 AM
Checking the Firmware Version
Keypad Microphone Features
Displays the firmware version on your radio.
The following additional features for your mobile are available
with a keypad-enabled microphone:
Keypad Microphone Features
Procedure:
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Info and press
4
or
to Firmware Ver. and press
to select.
to select.
to select.
5 The current firmware version is displayed.
Checking the Codeplug Version
Displays the codeplug version on your radio.
Procedure:
1
to access the menu.
2
or
to Utilities and press
3
or
to Radio Info and press
4
or
to CP Ver. and press
to select.
to select.
to select.
5 The current codeplug version is displayed.
44
English
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 45
Additional Advanced Features. . . . . . . . . . . . . . . . . . . page 46
Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 50
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 52
75D06-A.book Page 45 Thursday, January 4, 2007 8:53 AM
Using the Keypad
Number of Times Key is Pressed
Key
1
2
3
4
5
6
7
8
9
10
11
12
13
1
.
,
?
!
@
&
‘
%
-
:
*
#
A
B
C
2
D
E
F
3
G
H
I
4
J
K
L
5
M
N
O
6
P
Q
R
S
T
U
V
8
W
X
Y
Z
0
* or del
# or space
7
Keypad Microphone Features
You can use the 3 x 4 alphanumeric keypad on the keypad microphone (Motorola part number: RMN5065_) to access your radio’s
features. You can use the keypad to enter subscriber aliases or IDs, and text messages. Many characters require that you press a key
multiple times. The table below shows the number of times a key needs to be pressed to generate the required character.
9
NOTE: Press to enter “0” and long press to activate the CAPS lock. Another long press to turn off the CAPS lock.
NOTE: Press during text entry to delete the character. Press during numeric entry to enter a “*”.
NOTE: Press during text entry to insert a space. Press during numeric entry to enter a “#”.
45
English
75D06-A.book Page 46 Thursday, January 4, 2007 8:53 AM
Turning Keypad Tones On or Off
Additional Advanced Features
Keypad Microphone Features
You can enable and disable Keypad Tones if needed.
Procedure:
Initiating a Radio Check by Manual Dial
1
to access the menu.
Procedure:
2
or
to Utilities and press
3
or
to Radio Settings and press
4
or
to Tones/Alerts and press
5
or
to Keypad Tones and press
1
to access the menu.
2
or
to Contacts and press
to select.
3
or
to Manual Dial and press
to select.
4 If there is a previously dialed subscriber ID, the ID appears
to select.
to select.
to enable keypad
tones. The display shows Keypad Tone On.
OR
46
English
to select.
along with a blinking cursor.
6 The display shows Turn On. Press
The display shows Turn Off. Press
to disable keypad
tones. The display shows Keypad Tone Off.
to select.
Use the keypad to edit the ID. Press
OR
to select.
Use the keypad to enter a new subscriber ID. Press
select.
5
or
to Radio Check and press
to
to select.
6 The display shows Radio Check: <Subscriber ID>,
indicating that Radio Check is in progress. The green LED
lights up.
7 Wait for acknowledgement.
75D06-A.book Page 47 Thursday, January 4, 2007 8:53 AM
8 If the target radio is active in the system, a tone sounds and
9 Radio returns to the subscriber ID screen.
Initiating Remote Monitor by Manual Dial
Procedure:
to access the menu.
2
or
to Contacts and press
3
or
to Manual Dial and press
or
to Remote Mon. and press
to select.
6 Wait for acknowledgment.
7 The display shows Remote Monitor Successful.
OR
The display shows Remote Monitor Failed.
8 If successful:
If the
button is pressed when the radio is waiting for
acknowledgement, a tone sounds, and the radio terminates all
retries and exits Radio Check mode.
1
5
to select.
to select.
Once the timer expires, the radio sounds an alert tone and
the green LED turns off. The display shows Remote
Monitor Ended.
OR
If unsuccessful:
The radio repeats the attempt until the preprogrammed
number of tries expires.
Keypad Microphone Features
the display briefly shows Target Radio Available.
OR
If the target radio is not active in the system, a tone sounds
and the display briefly shows Target Radio Not
Available.
4 If there is a previously dialed subscriber ID, the ID appears
along with a blinking cursor.
Use the keypad to edit the subscriber ID. Press
select.
OR
Use the keypad to enter a new subscriber ID. Press
select.
to
to
47
English
75D06-A.book Page 48 Thursday, January 4, 2007 8:53 AM
Making a Private Call by Manual Dial
Making a Private Call by Alias Search
Procedure:
You can also use alias or alphanumeric search to retrieve the
required subscriber alias.
1
2
to access the menu.
This feature is only applicable while in Contacts.
or
to Contacts and press
are alphabetically sorted.
Keypad Microphone Features
3
or
to Manual Dial and press
to select.The entries
to select.
4 If there is a previously dialed subscriber ID, the ID appears
along with a blinking cursor.
Use the keypad to edit the subscriber ID.
OR
Use the keypad to enter a new subscriber ID.
5 Press the PTT button to make the call. The green LED lights
up. The first line displays the target radio’s ID. The second
line displays Private Call and the Private Call icon.
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
7 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
8 If there is no voice activity for a preprogrammed period of
time, the call ends.
9 You hear a short tone. The display shows Call Ended.
48
English
Procedure:
1
2
to access the menu.
or
to Contacts and press
are alphabetically sorted.
to select. The entries
3 Key in the first character of the alias.
4
or
to the required alias.
5 Press the PTT button to make the call. The green LED lights
up. The first line displays the target radio’s ID. The second
line displays Private Call and the Private Call icon.
6 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone
7 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
8 If there is no voice activity for a preprogrammed period of
time, the call ends.
9 You hear a short tone. The display shows Call Ended.
75D06-A.book Page 49 Thursday, January 4, 2007 8:53 AM
Sending a Call Alert by Manual Dial
Procedure:
Procedure:
1
to access the menu.
1
to access the menu.
2
or
to Call Log and press
2
or
to Contacts and press
3
or
to Missed and press
3
or
to Manual Dial and press
4
or
to the required missed call alias or ID and press
to select.
to select.
or
to send the Call Alert to and press
to Store? and press
to select.
6 A blinking cursor appears. If needed, key in the alias for that
ID and press
.
7 The display shows Contact Saved.
to select.
4 A blinking cursor appears. Enter the subscriber ID you want
to select.
5
to select.
5
or
to Call Alert and press
.
to select.
6 The display shows Call Alert: <Subscriber ID>,
confirming that the Call Alert has been sent.
7 The green LED lights up when your radio is sending the Call
Alert.
You can also store an ID without an alias.
8 If the Call Alert acknowledgement is received, a tone
sounds and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgement is not received, a tone
sounds and the display shows Call Alert Failed.
Keypad Microphone Features
Storing an Alias or ID from the Missed Call List
49
English
75D06-A.book Page 50 Thursday, January 4, 2007 8:53 AM
OR
Text Messaging
or
NOTE: Press
to return to the Home
Procedure:
Press the preprogrammed Text Messaging button and proceed
to step 3.
OR
Follow the procedure below.
to access the menu.
2
or
to Messages and press
3
or
to Write and press
to select.
to select.
4 Use the keypad to type your message.
Press
to move one space to the left.
Press
or the # key to move one space to the right.
Press the * key to delete any unwanted characters.
5 Press
once message is composed.
6
to the required subscriber alias or ID and press
50
English
or
to select.
.
7 The display shows Text Message: <Subscriber Alias
8 If the message is sent, a tone sounds and the display shows
Message Sent.
OR
If the message is not sent, the display shows Message Sent
Failed.
The maximum length of characters for a text message is 140.
1
to select.
or ID>, confirming your message is being sent.
Writing and Sending a Text Message
Keypad Microphone Features
Key in the subscriber ID and press
at any time to return to the previous
screen or long press
screen.
to Manual Dial and press
Only applicable when sending to subscriber aliases or IDs:
If the target radio successfully receives the Quick Text
message, a tone sounds and the display shows Message Ack
Rcvd.
OR
If the target radio fails to receive the Quick Text message, a
tone sounds and the display shows Message Ack Failed.
Replying to Text Messages from the Inbox
Procedure:
Press the preprogrammed Text Messaging button and proceed
to step 3.
OR
Follow the procedure below.
1
to access the menu.
75D06-A.book Page 51 Thursday, January 4, 2007 8:53 AM
or
to Messages and press
3
or
to Inbox and press
4
or
to the required message and press
to select.
5 Press
once more to access additional options.
6
to Reply and press
7
or
Only applicable when sending to subscriber aliases or IDs:
to select.
to select.
to select.
or
to Write and press
to select.
A blinking cursor appears. Use the keypad to type your
message.
Press
to move one space to the left.
Press
or the # key to move one space to the right.
Press the * key to delete any unwanted characters.
8 Press
once message is composed.
If the target radio successfully receives the Quick Text
message, a tone sounds and the display shows Message Ack
Rcvd.
OR
If the target radio fails to receive the Quick Text message, a
tone sounds and the display shows Message Ack Failed.
Editing a Quick Text Message
Procedure:
Press the preprogrammed Text Messaging button and proceed
to step 3.
OR
Follow the procedure below.
1
to access the menu.
Alias or ID>, confirming your message is being sent.
2
or
to Messages and press
10 If the message is sent, a tone sounds and the display shows
3
or
to Quick Text and press
Message Sent.
OR
If the message is not sent, a tone sounds and the display
shows Message Sent Failed.
4
or
to the required Quick Text and press
9 The display shows Text Message: <Group/Subscriber
to select.
to select.
Keypad Microphone Features
2
to select.
5 A blinking cursor appears. Use the keypad to edit the
message.
Press
to move one space to the left.
Press
or the # key to move one space to the right.
Press the * key to delete any unwanted characters.
51
English
75D06-A.book Page 52 Thursday, January 4, 2007 8:53 AM
6 Press
7
Security
once message is composed.
or
to the required subscriber alias or ID and press
to select.
OR
Procedure:
or
to Manual Dial and press
Key in the subscriber ID and press
to select.
.
8 The display shows Text Message: <Subscriber Alias
Keypad Microphone Features
Radio Disable via Manual Dial
1
2
or ID>, confirming your message is being sent.
9 If the message is sent, a tone sounds and the display shows
Message Sent.
OR
If the message is not sent, a tone sounds and the display
shows Message Sent Failed.
Only applicable when sending to subscriber aliases or IDs:
If the target radio successfully receives the Quick Text
message, a tone sounds and the display shows Message Ack
Rcvd.
OR
If the target radio fails to receive the Quick Text message, a
tone sounds and the display shows Message Ack Failed.
NOTE: You will not be able to save modified preprogrammed
messages.
52
English
3
to access the menu.
or
to Contacts and press
are alphabetically sorted.
or
to Manual Dial and press
Key in the subscriber ID and press
4
to select. The entries
to select.
.
or
to Radio Disable and press
green LED blinks.
to select. The
5 The display shows Radio Disable: <Subscriber ID> and
the green LED lights up.
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.
Do not press
during the Radio Disable operation as you
will not get an acknowledgement message.
75D06-A.book Page 53 Thursday, January 4, 2007 8:53 AM
Radio Enable via Manual Dial
1
2
3
to access the menu.
or
to Contacts and press
are alphabetically sorted.
or
to Manual Dial and press
Key in the subscriber ID and press
4
to select. The entries
to select.
.
or
to Radio Enable and press
green LED blinks.
to select. The
5 The display shows Radio Enable: <Subscriber ID> and
the green LED lights up.
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.
Keypad Microphone Features
Procedure:
Do not press
during the Radio Enable operation as you
will not get an acknowledgement message.
53
English
Keypad Microphone Features
75D06-A.book Page 54 Thursday, January 4, 2007 8:53 AM
54
English
MOTOROLA and the Stylized M Logo are
registered in the U.S. Patent and Trademark Office.
All other product or service names are the property
of their respective owners.
© 2007 Motorola, Inc.
All rights reserved. March 2007.
www.motorola.com/mototrbo
@6866575D06@
6866575D06-A