Quick Start Guide
KIT MODEL
SDS-P3042 / P4042 / P4082/ P5082 / P5102 / P5122
DVR MODEL
SDR-3102 / 4102 / 5102
SAMSUNG ALL-IN-ONE SECURITY SYSTEM
english
Thank you for purchasing a Samsung DVR Security System.
Follow the simple steps in this guide to set up and start using your new system.
If you have any questions or need help installing your new product please contact our free technical support.
Telephone: 1-877-349-3149
9am - 9pm EST, Monday - Friday
Internet: http://www.samsungsv.com
inStaLLinG YOuR SYSteM
M
` Images may differ depending on the model.
❒ 4ch DVR
Front
POWER
REC
NETWORK
1
Rear
IN1
VIDEO
IN
IN3
AUDIO
IN2
IN
VGA
LAN
IN4
AUDIO
OUT
3
eSATA
HDMI
USB
RS485
DC12V
4
5
2
LAN
1 Connect a mouse
2 Connect a camera
3 Connect a monitor
4 Connect the DC adaptors
5 Connect to a network router
English _1
❒ 8ch DVR
Rear
IN1
VIDEO
IN
IN3
AUDIO
IN2
IN
LAN
VGA
IN4
AUDIO
eSATA
OUT
HDMI
USB
RS485
DC12V
4
3
5
2
16ch DVR
LAN
Rear
VIDEO
IN
IN1
IN2
IN3
AUDIO IN4
IN
VGA
AUDIO
OUT
HDMI
eSATA
RS485
LAN
USB
DC 12
V
3
4
5
2
❒ connecting the DVR to Live monitoring
Front
POWER
REC
NETWORK
1 Connect a mouse
2_ English
Rear
CH1
VIDEO IN
CH2
CH4
IN1
IN2
IN3
IN4
AUDIO IN
eSATA
VGA
HDMI
AUDIO OUT
USB
RS485
English
CH3
LAN
3 Connect the DC adaptors (Camera)
DC 12 V
2 Connect an BNC camera
eSATA
CH1
CH2
CH3
CH4
CH9
CH10
CH11
CH12
CH1
CH2
CH5
CH6
CH5
CH6
CH7
CH8
CH13
CH14
CH15
CH16
CH3
CH4
CH7
CH8
VIDEO IN
IN1
IN2
IN3
IN4
AUDIO IN
LAN
VGA
HDMI
AUDIO OUT
RS485
USB
DC 12 V
LAN
4 Connect a monitor
VIDEO IN
IN1
IN2
IN3
IN4
AUDIO IN
eSATA
VGA
AUDIO OUT
HDMI
USB
RS485
DC 12 V
5 Connect the DC adaptors (DVR)
6 Connect to a network router
English _3
View the Launcher Menu
The Launcher menu appears on the bottom of the live screen.
1. In Live mode, right-click to display the context menu and select
<Show Launcher>.
2. Move the cursor to the bottom and click a desired item in the
2013-01-01
01:10:25
2013-01-01
01:10:25
Launcher menu.
1
2
MM `` If no input is entered for 10 seconds, the menu will disappear.
`` The Launcher menu can be accessed only by using the mouse.
`` Screen mode may vary depending on the DVR supported channel.
1 Date/Time
5 Zoom
3 Menu Expansion Button
7 Alarm
2 Screen Mode
4 Audio
6 PTZ
8 Freeze
SYSTEM SETTING
❒❒ Time Setting
1. Right click on the mouse and select main menu.
2. In the login window, enter the password and click <OK>.
JJ The initial administrator ID is “admin” and the password should be set
when logging in for the first time.
Set password for your wireless network if you use the product with a
wireless router. Being not protected with password or using the default
wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect
personal information and to prevent the damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any
other problems caused by mismanaging a password.
3. Click on Date/Time/Language. Set time and date.
4_ English
9 Play
0 Record
3 4 5 6 7 8 90
4. After filling in the information, Click <OK>.
English
Network Setting
❒❒ Connection Mode
1. Click on Network and select <Connection Mode>.
If there occur a problem with Connection Mode, check the connection
as “Installing your system” on page 1.
If you still have a problem, contact the nearest service center for more
information.
2. Under <Interface> Tab.
Check <IP Type> is set to <DHCP> as default.
If it connected successfully, you can see the success comment
JJ If you know Static IP information from your router, please select
<Static IP> and enter IP address, Gateway, and Subnet Mask etc.
1
MM `` Please refer to the Router Guide in provided CD when you use a static IP.
3. Under <Port> Tab.
JJ Write down <Device Port> and <HTTP Port>.
1 IP Address
2 Device Port
2
3
3 HTTP Port
4. When completing the setting, click <OK>.
English _5
❒❒ SETTING UP SAMSUNG iPOLiS DDNS
Since you will be accessing the DVR remotely, let’s setup your Samsung iPolis account first using the PC.
Go to Your PC
1. Open your browser and go to http://www.samsungipolis.com and click
<LOGIN>.
2. You first need to create an account.
Click <SIGN UP>.
3. Follow-the account registration instructions on the website.
1
2
4. After completing the account registration, login to your account.
JJ Write down your User ID and Password below.
1 ID
2 Password
5. Add your DVR to your account. Click <PRODUCT REGISTRATION>.
6. Create a name (Product ID) for your DVR. Use 4 to 20 alphanumeric
characters without spaces. Select classification, model number of the
DVR and click <REGISTRATION>.
JJ Model Number
4CH DVR : SDR-3102 (SDS-P3042)
8CH DVR : SDR-4102 (SDS-P4042, SDS-P4082)
16CH DVR : SDR-5102 (SDS-P5082, SDS-P5102, SDS-P5122)
7. After registration, you should see your product in the list.
JJ Write down the product ID below.
3 Product ID
8. Click <LOGOUT> to close the Web Page.
6_ English
sdr-5102HOME
sdr-5102
3
sdr-5102HOME sdr-5102
Go back to DVR
1. From network tab, click on <DDNS>.
English
2. Under DDNS Site, select <iPOLiS>.
3. Under Product ID, enter the product ID you created on the Samsung
iPOLiS website.
Under Quick Connect, select <Use> and click <OK>.
JJ Write down the DDNS Host address:.
1
1 DDNS Host Address
If the connection was not successful, your router may not be
supporting UPNP.
For more information on enabling UPNP on your router, please see
User manual.
English _7
REMOTE MONITORING
From a Windows computer
1. Open Windows Internet Explorer and go to http://www.samsungipolis.
com and click <LOGIN>.
2. Login with the user ID and password you wrote down earlier.
3. Click <
>.
4. You will be asked to install the active X plug-in.
5. Enter the user ID and password for the DVR.
JJ If the screen to the bottom right does not appear, check if the DVR set is
connected properly with a valid IP address.
6. Now, you can install the cameras and place the cameras where they are
needed.
8_ English
sdr-5102HOME sdr-5102
USING A SMARTPHONE
❒❒ For Android Phone
SDR-3100
SDR-5102
www.samsungipolis.com/sdr-5102
80
4524
admin
2 Search for Samsung iPOLiS.
3 L aunch the iPOLiS mobile app add the
DVR.
Tap on the menu icon and tap <Add
Device>.
4 R egister the DVR to the iPOLiS mobile.
JJ Name : Create a name for the DVR you are adding
Model : Select the DVR
Host : If you are using Samsung iPOLiS DDNS, enter the DDNS Host Address you
wrote down earlier. (Page 6, 7)
It should be www.samsungipolis.com/Product ID
HTTP Port : Enter the HTTP Port you wrote down earlier.
RTSP Port : Enter the last port number of Device Port you wrote down earlier.
ID : Default ID is <admin>. If you change before, please enter changed ID.
Password : If you changed before, please enter changed Password.
Camera : Select the cameras you want to view.
JJ The initial administrator ID is “admin” and the password should be set when
logging in for the first time.
Set password for your wireless network if you use the product with a wireless
router. Being not protected with password or using the default wireless router
password may expose your video data to potential threat.
Please change your password every three months to safely protect personal
information and to prevent the damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any other
problems caused by mismanaging a password.
English _9
English
1 V isit Play Store to Download the
Samsung iPOLiS mobile app.
❒❒ For iPhone
SAMSUNG TECHWIN C...
Utilities
Install
1 V isit App Store to Download the
Samsung iPOLiS mobile app.
2 Search for Samsung iPOLiS.
4 Register the DVR to the iPOLiS mobile.
3 L aunch the iPOLiS mobile app add the
DVR.
At the Add Device pop-up, tap <OK>.
MM `` For more information of each item, refer to “For Android Phone”.
SDR-5102
DVR
www.samsungipolis.com/s...
80
4524
RECORDING AND PLAYBACK
1. Press the [MENU] button on the remote control.
Use the left/right button (◄►) to select <Record>.
Use the up/down buttons (▲▼) to move to <Recording Schedule>,
and press [ENTER] button.
2. Set each of the Record Schedule options.
To change the setting, set the channel then select the time and date you
want to record and click <OK>.
The default is as shown.
Color
Part Names
Functions
White
No Recording
No schedule / event recording
Blue
Event
Event recording only
Orange
Green
10_ English
Continuous
Both(Cont&Evnt)
Scheduled recording only
Both scheduled / event recordings
To change the record quality & resolution, select <REC Quality &
Resolution>.
System
NTSC
Possible FPS
OFF, 1~30
English
PAL
Record Size
CIF 352 × 240
2CIF 704 × 240
4CIF 704 × 480
WD1: 960 x 480
CIF 352 × 288
2CIF 704 × 288
4CIF 704 × 576
WD1: 960 x 576
OFF, 1~25
3. In Live mode, click <Search> in the right-click menu.
Select <Time Search> in the <Search> menu.
Select a desired date in the calendar, and a desired timeline in the Time
bar, and press the <Play> button if you want to watch the recorded
video.
JJ The colored line indicates types of the recording data.
If you want to play a time specific data, enter an exact time.
4. If you have set the event recording, you can play a desired scene using
the <Event Search> function. In Live mode, click <Search> in the rightclick menu. Select <Event Search> in the <Search> Menu.
Set a desired date in the calendar and the result will be listed on the
table. Select one you wish to view and press the <Play> button.
5. You can change the play speed or channel, or stop the playback using
the onscreen button bar.
English _11