Samsung Series 6 6050 User manual

Figuresand illustrationsinthis UserManualareprovidedfor reference onlyand may differfrom actualproductappearance.Productdesignand

spedficationsmay be changedwithout notice,

Important Warranty Information Regarding

Television Format Viewing

'_ See tile warranty card for more information oil warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to vies! wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non- expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station Iogos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture.

To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to vies! different formats as a full screen picture. Be careful in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

- SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED

WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center.

Transportation to and from the Service Center is the responsibility of tile purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

-- In the United States : 1-800-SAMSUNG (1-800-726-7864)

-- In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture flies) or still image elements (such as TV channel Iogos, TV shows or movies in panorama or 4:3 format, stock or news scroll bars, etc.) on the screen. The constant display of still pictures can cause ghosting or image bum-in (image retention) on the LED screen, which will affect image quality. To reduce the risk of this effect, please follow the recommendations below:

- Avoid displaying the same TV channel for long periods.

- Always try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

- Reduce brightness and contrast values to the minimum required to achieve the desired picture quality. Values that exceed the minimum may speed up the bum-in process.

- Frequently use all TV features designed to reduce image retention and screen bum-in. Refer to proper user manual section for details.

P..........................................

Contact SAMSUNG WORLDWIDE

It yOU have any questions or comments relating to Samsung products, plaase contact the SAMSUNG cust0rner care center

Samsung Electronics

Canada Inc., Customer

Service 55 Standish Cour[

Mississauga, Ontario LSR

Samsung Electronics

America, Inc

85 Challenger Road

Ridgefield Park, NJ

07660 2112 i i i

= ............................................

@ 2012 Samsung Electronics Co., Ltd. All rigMs reserved.

a

BN68 04572A 00

To add channels to the Added Channels list, follow these steps:

1. Select one or more channels in the All Channels list using the

A/T buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Add in the Tools menu, and then press the ENTER button.

'_' All deleted channels will be shown on the All Channels list.

You add channels back to the Added Channels list on the

All Channels list.

'_' If you select Everyday or Every Week, the date you select in the Date field becomes the start date for your scheduled viewing. For Everyday, the TV will turn on every day, at the time you selected, starting from that date. For Everyweek, the TV will turn on every week, on the same day of the week as the start date you selected, at the time you selected, from that day on. If you select Once, the TV will turn on once, on the date and time you selected.

5. Press the ENTER _ button on your remote when done.

:_' Only Added Channels can be scheduled.

'_' A gray-colored channel indicates the channel has been deleted from the Added Channels list.

:_' Scheduled programs and channels are displayed in the

Programmed List.

'_' The Add menu option only appears for deleted channels.

[] Add to Favorite/Delete from Favorite: Lets you add channels to and delete channels from your Favorites list.

'_' When you select a digital channel, press the I_ button to view the digital program list. If you highlight a program in the list, and then press the ENTERS(Schedule) you set Timer Viewing for that program directly.

button,

To add channels to the Favorites list, follow these steps:

1. Select one or more channels in the All Channels list using the [] Select All: Select all the channels in the displayed channel list.

A/T buttons and the Yellow Select button on your remote.

[] Deselect All: Deselect all the selected displayed channels.

2. Press the TOOLS button on your remote. The Tools menu appears.

'_' You can only select Deselect All when one or more channels are selected.

3. Select Add to Favorite in the Tools menu, and then press the

ENTER _ button.

To delete channels from the Favorites list, follow these steps:

[] Channel Name Edit: Analog channels only. Lets you assign a name of up to five characters to an analog channel. For example,

Hist, Food, Golf, etc. This makes it easier to find and select a channel.

1. Select one or more channels in the Favorite Channels list

[] Auto Program: See Auto Program under Memorizing Channels.

using the A/_" buttons and the Yellow Select button on your remote.

Programmed List (on the Channel List Screen)

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Delete from Favorite in the Tools menu, and then press the ENTER _ button.

The Programmed list displays the channels and programs you have scheduled for viewing using the Time Viewing function. You can view, modify, or delete a show you have scheduled using the functions on the Programmed List screen Tools menu.

Programmed List Screen Tools Menu

[] Timer Viewing: You can schedule a channel to be displayed automatically at a set time, even when you are watching another channel. You must set the current time first in the Time > Clock function to use Time Viewing.

[] Change Info: Change the scheduling information for a show or channel you have scheduled.

To change the information, follow these steps:

To schedule a channel, follow these steps:

1. Select a channel in the Added Channels list using the A/T buttons and the Yellow Select button on your remote.

1. Select the Programmed List icon on the left side of the

Channel List screen, and then press the ENTER _ button.

2. Press the TOOLS button on your remote. The Tools menu appears.

2. On the Programmed List screen, select the show or channel entry you want to change, and then press the TOOLS button.

The Tools Menu appears.

3. Select Time Viewing in the Tools menu, and then press the

ENTER_ button. The Time Viewing screen appears.

3. Select Change Info, and then press the ENTER_ button.

The Time Viewing screen appears.

4. Use the _1i/1_buttons to move from entry field to entry field and the A/_' buttons to change the entries. Where numbers are displayed, you can also enter numbers directly using the number keypad on your remote.

5. Press the ENTER _ button when done.

4. Use the _1/1_ buttons to move from entry field to entry field and the Jl,/_' buttons to change the entries. Where numbers are displayed, you can also enter numbers directly using the number keypad on your remote.

[] Cancel Schedules: Cancel a show or channel you have scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the Programmed List icon on the left side of the

Channel List screen, and then press the ENTER _ button.

2. On the Programmed List screen, select the show or channel entry you want to cancel, and then press the TOOLS button.

The Tools Menu appears.

3. Select Cancel Schedules, and then press the ENTER_ button. The Cancel Schedule screen appears.

4. Select OK, and then press the ENTER _ button.

_5_

Advanced Settings

Available in Standard and Movie mode only.

Your TV has two kinds of menus, the Main menu and the various

Tools menus. The Main menu gives you access to most or all of the menu options available on your T_ The Tools menus display a selected number of frequently used menu options that change depending on the screen you are viewing. A Tools menu symbol

(_-_) in the lower right side of the screen indicates that a Tools menu is available.

Compared to previous models, new Samsung TVs offer a more precise picture with more precise controls.

'_' When your TV is connected to a PC, you can only make changes to Gamma and White Balance.

The Main menu has seven primary categories: o Picture o Sound

" Input

" Application

[] Color Space (Auto / Native): Auto automatically matches the range of colors available to create pictures to the color range of the video source. Native provides a color range wider than the color range of the video source.

[] White Balance: Adjusts the color temperature of the picture so that white objects look white (instead of, for example, slightly pink or slightly yellow) and the overall color of the picture looks natural.

o Channel - Support o Setup

To vies! the Main menu, press the MENU button on your remote. To view a Tools menu, press the TOOLS button on your remote.

'_' The menu options that appear in the Main menu depend on the Source you have selected. For example, if you have selected the HDMI source, the Channel category will not appear. To see the Channel category, you must first select TV in the Source List.

R-Offset / G-Offset / B-Offset: Adjusts each color's (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color's (red, green, blue) brightness.

Reset: Resets the White Balance to it's default settings.

[] Gamma: Adjusts the primary color intensity.

[] Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast.

The Menu options are presented below, arranged by Main menu categories. A Tools button symbol (_l_l'_n ) next to an option name indicates the option is also available in one of the Tools menus.

[] Black Tone (Off / Dark / Darker / Darkest): Selects the black level to adjust the screen depth. Darker settings make blacks look darker.

[] Flesh Tone: Adjusts the amount of red in skin tones.

[] Motion Lighting (Off / On): When on, the TV automatically adjusts the brightness of the screen in response to the brightness of the room. In bright light, the screen brightens. In dim light, the screen dims.

_' Available in Standard mode only.

Mode

Picture Options

Select your preferred picture mode.

'_' When your TV is connected to a PC, you can only select

Entertain and Standard.

[] Dynamic: Brightens the screen. Suitable for a bright room.

[] Standard: Suitable for a normal.

[] Movie: Darkens the screen, making it less glary. Suitable for watching movies in a darkened room.

[] Entertain: Sharpens the picture. Suitable for games.

_ Only available when the TV is connected to a PC.

Backlight / Contrast / Brightness / Sharpness /

'_' When the TV is connected to a PC, you can only make changes to the Color Tone, Size and HDMI Black Level.

[] Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes the picture bluer (cooler). Warm 1 and Warm 2 make the picture redder (warmer).

'_' Warm1 and Warm2 are deactivated when the picture mode is set to Dynamic.

[] Size: Set the size and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use the TVs 16:9 mode most of the time.

Color / Tint (G/R)

[] Backlight: Adjusts the brightness of the screen by adjusting the brightness of the individual pixels.

[] Contrast: Increases or decreases the contrast between dark and light areas of the picture.

[] Brightness: Adjusts the brightness of the screen. Not as effective as Backlight.

[] Sharpness: Sharpens or dulls the edges of objects.

[] Color: Adjusts the color saturation. The higher the Color setting, the more intense the color. Los! settings remove color and the picture becomes black, white and gray.

[] Tint: Adjusts the amount of green and red in the picture. As you increase the amount of green, the amount of red decreases and vice versa.

'_' When the TV is connected to a PC, you can only make changes to Backlight, Contrast, Brightness, and

Sharpness.

16:9: Sets the picture to the 16:9 wide screen format.

Zoom1 : Provides moderate magnification of the picture. Sides, top, and bottom are cut off.

Zoom2: Provides larger magnification of the picture. Sides, top, and bottom are cut off.

Wide Fit: Enlarges the aspect ratio of the picture so the picture fits the entire screen.

4:3: Sets the picture to the old, 4:3 format and puts black or gray borders on the right and left of the picture.

'_' Do not watch your TV in the 4:3 format for a long time.

Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which is not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when your TV is inputting HDMI (720p / 1080i / 1080p) or Component

(1080i/1080p) HD signals.

'_' HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

_2_

_' You can adjust and store settings for each external device you have connected to an input on the TV. Picture Sizes available by Input Source are listed below:

[] Information: Display the information for a show or channel you have scheduled. You can also change the schedule Information.

1. Select the Programmed List icon on the Idt side of the

Channel List screen, and then press the ENTER _ button.

2. On the Programmed List screen, select the show or channel entry you want information for, and then press the TOOLS button. The Tools Menu appears.

3. Select Information, and then press the ENTER_ button.

The Time Viewing Information screen appears.

4. Select Change Info and press the ENTER _ button to change information, or select Close and press the

ENTER _ button to close the Information screen.

[] Select All / Deselect All: You can select or deselect all channels in the channel list.

_3 Other Channel Menu Functions

Channel Mode (Added Channels/Favorite

Channels)

Lets you select the channel list displayed when you press the

ACHV (Channel) button on your remote. For example, if you select Favorite Channels, you will only see Favorite channels when you press the ACHV button.

Fine Tune

Analog channels only.

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.

'_' Select the channel, and then select Fine Tune.

'_' Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner.

'_' To reset fine-tuning, select the channel, select Fine Tune, and then select Reset on the Fine Tune screen.

Plug & Play

Lets you re-run the Plug & Play initial setup procedure. For instructions, see your Quick Start Guide.

Language

Set the menu language.

:_' Choose between English, Espa6ol, and Francais.

_3 Setting the Time

Time

'_' The time you set will appear when you press the INFO button.

[] Clock: Set the clock so you can use the various timer features of the T_

'_' If you disconnect the power cord, you have to set the clock again.

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press ENTER_ and select Auto or Manual, and then press

ENTER _ again.

If you selected Auto:

The TV will automatically download the correct time from a digital channel.

Select Time Zone, and then press the ENTER _ button.

Use theA/_" buttons to select your Time Zone, and then press ENTER _.

Select DST (Daylight Savings Time), and then press

ENTER _.

Select On if you want to turn the DST adjustment on and off manually. Select Off to turn off the

DST adjustment. Select Auto if you want the TV to adjust to DST automatically. Press ENTER_ when done.

'_' DST and Time Zone function are only available when the Clock Mode is set to Auto.

If you selected Manual:

The Clock Set screen appears. Use the A/_" buttons to change the values in each field or use the number buttons to enter the values directly. Use the _1/!_ buttons to move from field to field. When done with all the fields, press ENTER _.

'_' Available only when Clock Mode is set to Manual.

[] Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

'_' To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you select. You can set three different on/off timer settings.

'_' You must set the clock first.

[] On Time / Off Time: Set the hour, minute, am/pm, and

Activate/Inactivate fields for the On Time and Off Time. Use the

_1i/1_buttons to move from field to field. Use the _/_" buttons to change the values in each field. To activate the timer with the setting you have chosen, set the Activate/Inactivate field to

Activate.

[] Volume: Set the desired loudness.

[] Contents: To select what will be turned on when the timer setting is activated. You can set the TV to turn on a specific channel or play back contents such as photo or audio files.

Use the _1i/1_-buttons to move to move to the Contents field, and then press the ENTER _ button. The Contents screen appears. Use the _1i/1_buttons to move from field to field. Use the _/_r buttons to change the values in each field.

- TV/USB: Select "IV or USB. The USB device must be connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, folios! these steps to select a folder containing MP3 (Music) or JPEG (Photo) files on the USB device:

'_' The maximum displayed number of files, including sub folders, in one folder of USB storage device is 2000.

'_' The media may not be playing smoothly when using the device lower than USB 2.0.

1.

Use the _/_, buttons to move to the field under Music or the field under Photo, and then press the ENTER button. The TV displays a single folder (the Root folder) and the type or name of the device.

_6_

iiiiiiiiiii!iiiii!iii!iii i iii iii i! i i i Language

Digital channels only.

ATV, AV,Component (480i, 480p)

DTV (1080i, 1080p), Component (1080i,

16:9, Zoom1, Zoom2,

4:3

16:9, Wide Fit, 4:3,

DigitaFTV broadcasts can transmit many audio tracks simultaneously (for example, simultaneous translations of a program into foreign languages).

1080p), HDMI (720p, 1080i, 1080p) Screen Fit

'_' You can only select a language from among the ones being broadcast.

[] Digital Noise Filter (Off / Low / Medium / High / Auto) : If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

'_' When the signal is weak, try all the Digital Noise Filter options until the TV displays the best picture.

Multi-Track Sound (MTS)

Analog channels only.

[] Mono: Select for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.

[] Stereo: Select for channels that are broadcasting in stereo.

[] HDMI Black Level (Normal / Low) : For HDMI signals, select the black level to adjust the screen depth. Los! make blacks look darker.

[] SAP: Select to listen to the Separate Audio Program, which is usually a foreign-language translation.

'_' Available only in HDMI mode (RGB signals).

[] Film Mode (Off / Auto) : Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.

'_' Available in ATV, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i/1080i).

[] Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /

Demo): Enhances motion in fast moving scenes.

'_' The info screen on your TV displays the resolution and frequency of the incoming video signal (60Hz). This displayed frequency is not what the TV is displaying by using the Auto Motion Plus function.

[] LED Motion Plus (Off/On): Removes drag from fast scenes with a lot of movement to provide a clear picture.

'_' Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater.

Picture Reset

Because each station has its own broadcasting conditions, the volume may fluctuate each time you change the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

[] Picture Reset (Reset Picture Mode/Cancel): Resets the picture settings to their factory defaults.

Mode

[] Audio Format (POM/Dolby Digital): You can select the Digital

Audio output (SPDIF)format. The available Digital Audio output format may differ depending on the input source.

'_' By connecting the TV to a receiver or home theater with

Dolby Digital and 5.1ch speakers and selecting Dolby

Digital, you can maximize your interactive 3D sound experience.

[] Standard: Selects the normal sound mode.

[] Music: Emphasizes music over voices.

[] Movie: Provides the best sound for movies.

[] Clear Voice: Emphasizes voices over other sounds.

[] Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired.

[] Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTER _ when done (0ms _ 250ms).

Speaker Settings

Equalizer

Available itsStandard sound mode only.

[] Balance L/R: Adjusts the balance between the right and left speaker.

[] 100Hz / 300Hz / 1 KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the loudness of specific bandwidth frequencies.

[] Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

Available in Standard sound mode only.

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content through two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

[] Speaker Select (External Speaker / TV Speaker)

If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV's speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.

'_' When you set Speaker Select to External Speaker, the

TV's speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Select to TV Speaker both the TV's speakers and the external speakers are on. You will hear sound through both.

'_' When Speaker Select is set to External Speaker, the

VOLUME and MUTE buttons will not operate and the sound settings will be limited.

'_' If there is no video signal, both the TV's speakers and the external speakers will be mute.

Sound Reset

[] Reset All: Resets all sound settings to the factory defaults.

_3_

2.

Press the ENTER_ button. A list of folders on the device appears.

'_' If there are no folders on your device, press the

Yellow select button to select the Root folder, and then press the RETLJRN button. The Timer screen re-appears.

3.

Use the &/T buttons to highlight a folder that contains music or photos, and then press the Yellow select button to select the folder.

4.

Press the RETURN button. The Timer screen re-appears.

[] Repeat: Select Once, Everyday, Mon~Fri, Mort~Sat, Sat-Sun or Manual. If you select Manual, you can select the days you want to activate the timer by using the _1i/_, buttons to highlight the day, and then pressing the ENTER _ button. To unselect a day, highlight it, and then press the ENTER _ button.

When you finished making all your selections on the Timer screen, press either the ENTER _ or RETURN button.

_3 Other Features

Program Ratinq Lock

The Program Rating Lock feature lets you block programs you've determined are inappropriate for your children based on the program's ratings. To access the Program Rating Lock feature and make any changes, you must enter a PIN (personal identification number). To watch a blocked program, you must also enter the same PIN.

'_' Program Rating Lock is not available in HDMI or

Component mode.

'_' The default PIN number of a new TV set is "0-0-0-0".

You can set your own PIN using the Change PIN function.

How It Works

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same way for each option. Each option displays a grid or table. All the tables have ratings listed on the left. The TV Parental Guidelines option also has kinds of content listed across the top: ALL: Lock all

TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation

/ L: Adult Language / D: Sexually Suggestive Dialog.

To IocWblock movies or shows with certain ratings and/or kinds of content, click the square next to the rating and/or under the kind of content. A lock appears. To unlocWunblock, click the square again.

When you click a low rating, all the ratings above it will also display locks. You can also Allow All or Lock All. When done, press the

RETURN button on your remote.

[] Change PiN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter them in Enter New PIN fields.

Re-enter the same 4 digits in Confirm New PiN fields. When the

Change PIN screen disappears, press the OK button. The TV has memorized your new PIN.

'_' If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to "0-0-0-0" :

POWER (off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on)

Game Mode (On/Off)

When you connect a game console such as a PlayStation

TM or Xbox

TM to your T_, you can enjoy a more realistic gaming experience by turning on the Game Mode function.

'_' Precautions and limitations for game mode:

* Before you disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

* If you display the TV menu in Game Mode, the screen shakes slightly.

'_' Game Mode is not available when the input source is set to

TV.

'_' After connecting the game console, set Game Mode to On.

You may notice slightly reduced picture quality.

When you access the Program Rating Lock Menu functions for the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen closes and the Program Rating Lock Menu appears. Every time you access the Program Rating Lock functions, the PIN screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating

Lock, and then press ENTER _.

Select On, and then press the

ENTER _ key again. Depending on what type of programs or movies you want to block, select one of the options on the screen, and then press the ENTER _ button. The options are listed below:

[] TV Parental Guidelines: You can block TV programs based on their ratings. This function allows you to control what your children are watching.

[] MPAA Rating: You can block movies based on their MPAA ratings. The Motion Picture Association of America (MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children.

[] Canadian English: You can block TV programs based on their

Anglophone Canadian ratings.

[] Canadian French: You can block TV programs based on their

French Canadian ratings.

[] Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

Caption

(On-Screen Text Dialogue)

[] Caption: You can switch the caption function or] or off. If captions are not available, they will not be displayed on the screen.

'_' The Caption feature does not work in Component or

HDMI mode.

[] Caption Mode: You can select the desired caption mode.

Default / OO1~004 / Text1 ~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the

TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1 ~Service6 / OO1~004 / Text1 ~Text4:

(Digital channels only) The Digital Captions function works with digital channels.

'_' Service1~6 may not be available in digital caption mode depending on the broadcast.

[] Digital Caption Options: (Digital channels only)

Size: Options include Default, Small, Standard and Large. The default is Standard.

Font Style: Options include Default and Styles 0 to 7. The default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letters. The default is White.

_3 Memorizing Channels

When you first set up your TV using Plug & Play, the TV memorized the channels that were available over the air or through your cable system and added them to the Channel List. The Antenna and

Auto program functions described below let you re-run the channel memorization function without having to re-run the Plug & Play procedure.

_3 Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've scheduled for viewing. Add or delete Favorite channels, add or delete channels from the Added Channels list, schedule channels or programs for viewing. Watch a channel by selecting the channel in the All Channels, Added Channels, or Favorite screen, pressing the A / _' buttons, and then pressing the ENTER_ button.

Antenna (Air / Cable)

Before your television can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable.

Select Menu >Channel > Antenna > Air or Cable. After you have selected the signal source, go on to the Auto Program function.

'_' Selecting the signal source using the Antenna function also determines the signal source the TV is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture.

Auto Program

The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List.

To start Auto Program, follow these steps:

1. Push MENU riTI _ Channel _ Auto Program _ ENTER_ on your remote. The Antenna Source screen appears.

2. On ttqe Antenna Source screen, select ttqe source of your TV signal.

Air

If your TV is connected to an antenna ctqoose Air, and then press

ENTER _.

The TV will automatically start memorizing ctqannels.

Cable

If your TV is connected to a cable outlet, choose Cable, and then press ENTER _.

Go to Step 3.

Auto

Channel List Screens icons are listed on the left side. Select an icon using the _/T buttons to view each list.

[] \_ All Channels: Shows all currently available channels including those you deleted from the Added Channels list.

[] _ Added Channels: Shows all Added Channels. These are the channels that appear when you press the CH button.

[] _ Favorite: Shows all favorite channels.

[] _ Programmed: Shows all channels and programs currently scheduled using Timer Viewing.

'_' Remote control buttons active on the Channel List screen.

° Green (Zoom): Enlarges or shrinks a channel number.

° Yellow (Select): Move the cursor to a channel.

Press the Yellow button to select the channel.

A -,/ mark appears.

Repeat to select additional channels.

Then, open the Tools menu and apply a function to the channels you selected.

o r] (Tools): Displays the Channel menus may differ depending

List Tools on the situation.) menu.

(The Tools

Display

Icons Used in the Channel List Screens

If you choose Auto, and then press ENTER _, the TV will automatically select the correct Antenna source.

Go to

Step 3.

3. On the Cable Type screen, use the _Ii/I_-/_/T buttons to select the type of digital and analog cable systems you have: STD, HRC, or IRC. Most systems are STD (Standard). When done, select

Start, and then press ENTER _.

The TV will start memorizing channels.

'_' Channel memorization can take up to 45 minutes, depending on your cable system.

'_' Memorized channels are added to the Added Channels list. These are the channels you will see when you use the

Channel buttons on your remote.

Clear Scrambled Channel

This function filters out scrambled channels after Auto Program is completed. This process may take up to 20_30 minutes.

'_' Press the ENTER_

Channel.

button to stop the Clear Scrambled

'_' This function is only available in Cable mode.

,_/

(_)

I:_

A selected channel.

A Favorite channel.

A reserved program.

A program cur_ntly being broadca_.

_3 The Channel List Tools Menu

The Channel List Fbols menu contains most of the functioRS you can use on the All Channel, Added Channels, and Favorite List screens. '[b view, select a list screen, select a channel, and then press the TOOLS button.

[] Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

To delete channels from ttqe Added Channels list, follow these steps:

1. Select one or more channels in the Added Channels list using ttqe _/_' buttons and the Yellow Select button on your remote.

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Select Delete in the Tools menu, and ttqen press ttqe ENTER button.

_4_

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the captions. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

'_' Digital Caption Options are available only when you can select Default and Service1 ~ Service6 in Caption Mode.

'_' The Foreground and Background cannot be set to the same color.

Melody

Lets you control whether a melody plays when the TV is turned on or off.

'_' The Melody does not play:

° When no sound is output from the TV because the MUTE button has been pressed.

° When no sound is output from the TV because the volume has been reduced to minimum with the VOL _ button.

° When the TV is turned off by the Sleep Timer function.

[] Reset: Reset all settings to the factory defaults.

'_ The PIN input screen appears before the setup screen.

'_' Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest firmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this informationwhen connecting external devices to the

TV.

Contact Samsung

Vies! this informationwhen your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.

Enjoy photos, music and/or movie files saved on a

USB Mass Storage Class (MSC) device.

Auto Protection Time

[] Auto Protection Time (Off / 10 min / 20 rain / 40 rain / 1 hour):

If the screen remains idle with a still image for a certain period of time you define, the screen saver is activated to prevent the formation of ghost images on the screen.

Eco Solution

[] Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

[] Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.

'_' If you adjust the Backlight, the Eco Sensor will be set to

Off.

Min. Backlight: When Eco Sensor is On, the minimum screen brightness can be adjusted manually.

'_' If Eco Sensor is On, the display brightness may change

(become slightly darker in most cases) depending on the surrounding light intensity.

[] No Signal Power Off (Off / 15 rain. / 30 min. / 60 min.): Sets how quickly the TV switches to standby mode, if no picture is being received.

'_' Disabled when the PC is in power saving mode.

[] Auto Power Off (Off / On): The TV will be automatically turned off when no user operation is received for 4 hours.

Self Diagnosis

[] Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen.

[] Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen.

[] Signal Strength: (Digital channels only) An HD channel's reception quality is either perfect or the channels are unavailable.

Adjust your antenna to increase signal strength.

Cl Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie files to the USB jack on the back of tt_e TV. A pop up window appears.

3. Press the MED_A.P button on your remote. The Media Play menu appears.

_3 Using the Media Play Menu

To open Media Play in the Menu, follow these steps:

1. Press the MENU button. Then, press the • or _' button to select Application on the left, and then press the ENTER button.

2. Press the ,k or T button to select Media Play (USB), and then press the ENTER _ button.

3. Press the _! or _- button to select an icon (Videos, Music,

Photos, Settings), and then press the ENTER _ button.

'_' Media Play might not work properly with unlicensed multimedia files.

'_' Need-to-Know List before using Media Play (USB)

° The file system supports FAT16, FAT32 and NTFS.

° Certain types of USB Digital camera and audio devices may not be compatible with this TV.

° Media Play only supports USB Mass Storage Class (MSC) devices.

MSC is a Mass Storage Class Bulk-Only Transport device.

Examples of MSC are Thumb drives and Flash Card

Readers.

Devices should be connected port.

USB HDD is not supported.

directly to the TV's USB

_7_

toprevent

"The device from besupported.

"Do please upyour

(more 0.SA) disconnect device itisloading.

image, onthe

"Ifafile cannot does with support

,, Supported

Management

External

Subtitle Formats

MPEG4 timedtext

SAMI

SubRip

SubViewer

MicroDVD

SubStationAlpha

AdvancedSubStationAlpha

management providers, managing devices settlements.

"Ifanover-power rights device not interests connecting

"Ifthe aUSB while are be during time inAuto

Intemal

Xsub

AdvancedSubStationAlpha

Protection

"The the mode ormay beable connect the iscorrupted, inthe them files device.

recognized,

" Supported

*mp4

SubStationAlpha

SubRip

MPEG4Timed text

Video Formats

MP4

DivX

3 11/4x/5 1

/60

H264

connection.

use from PC permanently

°Photos supports

Videos number and folders

°The not not saved files when run folders not displayed offiles, device including is2000.

media not using device

*avi

*inky

AVl,

MK'V

ASF

Ave

MJPEG

DivX

3 11/4x/5 1

/60

MPEG4 SP

/ ASP

H264

MJPEG

DivX 311

/ 4x/5,1

/ 60

MPEG4 SP

/ASP

1920x1080

1920x1080

1920x1080

640x480

1920x1080

1920x1080

1920x1080

640x480

1920x1080

1920x1080

AVI

MK'V

MK'V

MK'V

MP4

6-+30

6-+30

6-+30

6-+30

6-+30

6-+30

6-+30

6-+30

6-+30

6-+30

Videos

H,264

MPEG2 *,ts

1920x1080

1920x1080

6-+30

6-+30

,ttxt

Sml srt sub sub or txt ssa ass

PictureFormat

TextFormat

TextFormat

TextFormat

TextFormat

30Mbps

30Mbps

30Mbps

10Mbps

30Mbps

30Mbps

30Mbps

10Mbps

30Mbps

30Mbps

30Mbps

3OMbps

MP3 /

ADPCM /

AAC

MP3/

AC3 /

LPCM /

ADPCM

/ DTS

Core

1. In the Media Play menu, press the 4 or _ button to select

Videos, and ttlen press tile ENTER _ button.

2. Press the _/_/A/_" buttons to select a video in the file list.

3. Press the ENTER _ button or [_ (Play) button.

The file name is displayed on the top of the screen with the playing time.

If video time information is unknown, playing time and the progress bar are not displayed.

During video playback, you can search using the _1and buttons.

'_' In this mode, you can play movie clips contained in a game, but you cannot play the game itself.

*m2ts

*dat

*mpg

*mpeg

*rob

*3gp

*,fly

*swf

TS

PS

3GPP flash formats

H, 264 BP

/ MP / HP

MPEG1

MPEG2

H, 264 BP

/ MP / HP

MPEG4 SP

/ASP

H,264

H,264

1920x1080

1920x1080

1920x1080

1920x1080

1920x1080

1920x1080

1920x1080

1920x1080

6-+30

24/25/30

24/25/30

6-+30

6-+30

6-+30

6-+30

6-+30

3OMbps

30Mbps

3OMbps

3OMbps

30Mbps

3OMbps

3OMbps

3OMbps

M P3 /

AC3 /

LPCM /

ADPCM

/WMA

/ WMA

Pro

AC3/

AAC /

MP3 /

DD+ /

HE AAC

AC3/

MPEG /

LPCM /

AAC

MP3

MP3

+9+

Trouble Powering On

Stand Assembly

Cannot find a channel

Peer Picture

The TV image does not leek as good as it did in the store,

The picture is distorted: macroblock error, small block, dots, pixelLzation,

Cobr is wrong er missing.

There is poor color or brightness.

There is a detted line en the edge ef the screen.

The picture is black and white.

When changing channels, the picture freezes or is distorted or delayed,

Sound Problems

There is no sound or the sound is too low at maximum velume.

The picture is good, but there is ne sound,

Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button on the TV or remote and the light should blink about 5 times before the TV turns on.

Ifyou find that yeu are having treuMe pewering on your Samsung television, there are a number of things te check it before making a call to the service department.

• If you happen to be using the TV as a monitor and the stand+by light enly blinks for a few seconds when you press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the mouse. Then try turning your TV on.

Ifyou're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have a cable or satellite box, your TV may appear te be off because the cable or satellite box is not outputting a signal. To test the signal output ef your cable or satellite box, press the guide or info button en the cable or satellite box remote contrel. Ifthe screen displays the guide or infe data, the preblem is caused by the box.

+ If you have any treuMe assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.

+ Remun Plug & Play or run Auto Program. (ge to MENU + Channel - Auto Program)

First, perform the Picture Test and to see if YOUrTV is displaying the test image ProPerly.

_o to MENU _ Support - Self Diagnosis = Picture Test

Ifthe test image is properly displayed, the poor picture may be caused by the source or signal.

+ If you have an analog cable/satellite bex, upgrade to a digital set top bex. Use HDMI or Component cables to deliver HD (high definition) picture quality.

+ Cable/Satellite subscribers: Try HD channels from the channel line up.

+ Air/Cable Antenna connection: Try HD channels after running Auto Program.

=& Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality ef up scaled SD content is lew.

+ Adjust the Cable/Set top box video output resolution te 1080i or 720p.

+ Compression ef video contents may cause picture distortion, especially en fast meving pictures such as those in sports and action movies.

+ A weak signal can cause picture distortion. This is net a TV problem.

+ Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

+ If you're using a component connection, make sure the component cables are connected te the correct jacks.

Incorrect er bose connections may cause color problems er a blank screen.

+ Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

+ Adjust the Energy Saving option in the TV menu. (go to MENU + Setup + Eco Solution + Energy Saving )

+ Try resetting the picture to the default picture settings. (go to MENU + Picture + Picture Reset)

+ If the picture size is set to Screen Fit, change it te 16:9.

+ Change the cable/satellite box resolutien.

+ If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1 en the TV.

+ If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box rebeots, it may take up to 20 minutes)

+ Set the output resolution of the cable bex to 1080i er 720p.

Perform the Sound Test to confirm that your TV audio is properly operating.

(go to MENU : Support = Self Diagnosis t Sound Test)

Ifthe audio is OK, the sound problem may be caused by the source or signal.

+ Check the volume of the device (Cable/Sat Box, DVD, Blu+ray, etc.) connected to your TV.

The speakers are making an inappropriate neise.

No Picture, No Video

The TV will not turn on.

The TV turns eft automatically.

'

+ If you are using an external device, check the device's audio output option Ex. you may need to change your cable bex's audio optien to HDMI if the box is connected to your TV using an HDMI cable.

+ Reboot the connected device by reconnecting the device's power cable.

+ Check the cable connections.

Make sure a video cable is not connected to an audio input.

+ For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

+ Perform the Sound Test as explained above.

+ Make sure the AC power cord is securely plugged into the wall outlet and the TV.

+ Make sure the wall outlet is working.

+ Try pressing the POWER button on the TV to make sure the problem is not the remote.

If the TV turns en, refer te 'Remote contrel does net work' belew.

+ Ensure the Sleep Timer is set to Off in the Time menu.

+ tf your PC is connected to the T_, check your PC power settings.

+ Make sure the AC power cord is plugged securely into the wall outlet and the TV.

+ When yeu are watching TV connected to an antenna or cable connection, the TV will turn eft after 10 + 15 minutes if there is no signal.

+13+

Other Restrictions

+ Video content will not play, or not play correctly, if there is an error in the content or the container.

+ Sound or video may not work if the contents have a standard bit ratd frame rate above the compatible Frame/sec listed in the

Supported Video Formats table.

+ If the Index Table erroneous, the Seek (Jump) function is not supported.

+ The menu may take longer to appear if the video's bit rate exceeds 10Mbps.

+ Video content can not be played if there are many contents in one file.

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

MPEG4 SP, ASP :

- Below 1280 x 720:60 frame max

- Above 1280 x 720:30 frame max

H.263 is not supported.

GMC is not support.

Photos

1. In the Media Play menu, press the _ or !_ button to select

Photos, then press the ENTER _ button.

2. Pressthe _li/_-/A/_" buttons to setect a pt_oto in thefile list.

3. Press the ENTER _

_' NOTE button or [_ (Play) button.

* While a photo list is displayed, press the [_ (Play) / ENTER_ button on the remote control to start a slide show.

* All files in the file list section will be displayed in the slide show.

* During the slide show, files are displayed in order.

* During the slide show, you can adjust the slide show speed using ([_) (REW) or (_) (FF) button.

* You can move to other files using _ or _- button.

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not supported)

WMA Lossless is not supported.

Music

_z Media Play can play Music files automatically during a Slide

Stqow if Background Music is set to On.

_ You cannot change the Mode in Background Music until the

Background Music file has finished loading.

,, Supported Photo Formats

Base4ine

JPEG

Progressive

Other Restrictions

., CMYK, YCCK Color space JPEG are not supported.

15360 x 8704

1024 x 768

1. In the Media Play menu, press the _li or _ button to select

Music, and then press the ENTER _ button.

2. Press the _/_/A/T file list.

buttons to select the desired Music in the

3. Press the ENTER _ button or _ (Play) button.

'_' During music playback, you can search using the _li and

_- button.

_' _ (REW) and _ (FF) buttons do not function during play.

_' Media Play only displays files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB device.

_' If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)

Playing Multiple Files

Playing selected video/music/photo files

1. On the File List screen, highlight a file, and then press the Yellow button on your remote.

2. Repeat Step 1 to select multiple files.

_' NOTE

* A _ mark appears to the left of the selected files.

* To cancel a selection, press the Yellow button again.

* To deselect all selected files, press the TOOLS button, select

Deselect All, and then the ENTER _ button.

3. Press the TOOLS button, select Play Selected then press the ENTER _ button.

Playing a video/music/photo folder

Contents, and

1. With the folders on your USB device displayed,

_/_-/A/T buttons to highlight a folder.

2. Press the TOOLS button, select Play Folder,

ENTER_ button.

use the and then press the

+10+

There is no picture/video.

+ Check the cable connections.

(Remove and reconnect all cables connected to the TV and external devices).

+ Set your external device's (Cable/Sat Box, DVD, Blu+ray etc) video outputs to match the cennectiens to the TV input. For example, if an external device's output is HDMI, it sheuld be connected to an HDMI input on the TV.

+ Make sure your connected devices are powered on.

+ Be sure to select the correct input source by pressing the ,>OURCE button en the remote control.

+ Rebeot the connected device by reconnecting the device's power cable.

RF (Cable/Antenna} Connection

The TV is not receiving all channels.

No Caption en digital channels.

The picture is distorted: macroblock, error, small block, dots, pixelization,

+ Make sure the coaxial cable is connected securely.

+ Run Auto Program to add available channels to the channel list.

go to MEN_J +Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRC and _RC)

+ Verify the antenna is positioned correctly.

+ Check the Caption Setup menu. Try changing Caption Mode Service t to CCt.

+ Some channels may not have caption data.

+ Compression ef video contents may cause picture distortion, especially en fast moving pictures such as those in sports and action movies.

+ A weak signal can cause picture distertion. This is net a TV preblem.

Others

Purple/green relling horizontal bars and buzzing noise from the TV speakers with

Component cable connection.

The picture will not display in full screen.

+ Remove the left and right audio connectiens from the set+top+bex. If the buzzing stops, this indicates that the set+ top+box has a grounding issue. Replace the Component video cables with an HDMI connection.

The remote control does not work.

+ HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

+ Black bars on the top and bettom appear when mevies that have aspect raties different from your TV play on the

TV.

+ Adjust the picture sLzeoptien on your external device or change the TV te full screen.

+ Replace the remote control's batteries. Mako sure you insert them with the polarity ( i/ ) correct.

+ Clean the transmission window located on the tep of the remote control.

+ Try peinting the remote directly at the TV from 5,_6 feet away.

+ Program the Cable/Set top bex remote control to operate the TV. Refer te the Cable/Set top bex user manual fer the SAMSUNG TV code.

The cable/set top box remote control does not turn the TV on or off, or adjust the velume.

A "Mode Not Supported" appears,

Caption message en the TV menu is greyed eut.

You see small particles when yeu look closely at the edge ef the frame ef the %/.

POP (TV'S internal banner ad) appears on the screen.

+ Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to reselution settings in this manual.

+ You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

Component.

+ Caption must be activated on the external device.

+ This smell is normal and will dissipate in a few days.

+ This functien is only available for digital channels received through an Antenna / RF/Ceax connection.

There is a plastic smell from the TV.

TV Signal Strength is unavailable in the

Self Diagnosis Test menu.

TV is tilted te the right er left side.

The Channel menu is grey out

(unavailable).

Your settings are lost after 30 minutes er every time the %/is turned off.

You have intermittent loss ef audie or videe.

+ Remove the stand base from the TV and reassemble it.

+ The Channel menu is only available when you select the TV source.

+ If %/is in the Store Demo mode, it will reset audie and picture settings every 30 minutes. Please change from

Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button te select

TV mode, go to MENU _ Setup _ Plug & Play _ ENTER E_.

+ Check the cable connections and reconnect them.

+ Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If meunting the %/to the wall, we recommend using cables with 90 degree connectors.

+ This is part ef the product's design and is not a defect.

+ Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

'_' This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

'_' Watch these troubleshooting on video at www.samsung.com/spsn.

'_' Some functions and pictures shown in this manual are available on specific models only.

'_' You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com

Support _ Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.

+14+

Media Play - Additional Functions

[] Videos/Music/Photos Play Option menus

Wtqen playing a file, press the TOOLS button.

Title

You can select another video file

Io play directly.

iYou can play movie and music

Repeat Mode ifiles repeatedly.

Picture Size You can adjust the picture size to

your preference.

Picture Mode iYou can adjust the picture setting.

Auto Motion

Plus

You can enhance motion in fast moving scenes.

Sound Mode iYou can adjust the sound setting.

Subtitle

Setting i Yeu can play the video with

Subtitles. This function only works i if the subtitles have the same file qame as the video.

Audio Format You can select the digital audio autput format.

Audio

Language

Stop Slide

Show /

Start Slide

Show

Slide Show

Speed iYou can change the audio i language if the video has more i than one language.

You can start or stop a Slide i Show.

Background

Music

You can select the slide show speed during the slide show.

Yeu can set and select i background musicwhen iwatching a Slide Show.

You can zoom into images in full screen mode.

Zoom

Rotate

_nformation

You can rotate images in full screen mode.

i You can see detailed informatien abeut the played file.

,,/

,,/

,,/

,,/

,,/

,,/

,,/

,,/

,,/

,,/

,,/

,,/

,,/

,,/

'_' NOTE

° Standard dimensions below.

for wall mount kits are shown in the table

* When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

* Do not use screws that do not comply with the VESA standard screw specifications.

* Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

* For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

* Do not fasten the screws too firmly.

This may damage the product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

* Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

* Do not mount the TV at more than a 15 degree tilt.

* Always have two people mount the TV on a wall.

LED+%/

19_22

26

32,_40

46_60

75X 75

100X 100

200 X 200

400 X 400

M6

M8

Do not install your Wall Mount Kit while your

%/is turned on.

It may result in personal injury due to electric shock.

Securing the TV to the Wall

M4

Settings

Using the Setup Menu

[] DivX@ Video On Demand authorized

: Shows for the TV. If you connect the registration to the DivX web code site and register with the 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed.

'_' For more information corn".

on DivX@ VOD, visit "http://vod.divx.

[] Information: Select to view information about the connected

USB device.

Installing the Wall Mount Kit

The wall mount kit (sold separately) the wall.

allows you to mount the TV on

For detailed information the instructions provided technician for assistance about installing the wall mount, see with the wall mount items.

Contact a when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

Wall Mount Kit Specifications (VESA)

'_' The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor.

When attaching to other building materials, please contact your nearest dealer. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

+11+ z_ Caution: Pulling, pushing, or Clirnbing onto the +iV may Cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fal! device for safety purposes, as follows.

To prevent the TV from falling

=z Since the necessary brackets, screws, and string or cable are not supplied, please purctqase these separately.

1. hqsertthe screws into the wall brackets and firmly fasten them to the wall. Make sure ttqe screws are firmly fixed to the wall.

=z We strongly recommend you drive the screws into a stud.

2. Using screws, insert the screws through the TV brackets, and then fasten the screws to the top VESA screw holes on ttqe back of the TV.

3. Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or cable tightly to the brackets.

'_' Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

'_ Install the TV dose to the wall so that it does not fall.

'_' Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on the TV.

Untie the string or cable before moving the TV.

'_' To purcase a TV Holder kit, contact Samsung customer care.

Kensington Lock

The Kensington Lock is not supplied by Samsung.

It is a device used to physically fix the system when using it in a public place.

Refer to the information manual on proper provided use.

with the Kensington Lock for additional

_s, Please find a "_" icon on the rear of the TV. The Kensington slot is beside the "_" icon.

,s, The position and color may differ depending on the model.

Assembling the Wire Holder stand

Display Modes (HDMI/DVI Input)

Optimal resolution is 1920 x 1080@60Hz.

IBM

MAC

640 x 350

720 x 400

640 x 480

832 x 624

1152 x 870

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1152 x 864

1280 x 720

1280 x 800

1280 x 1024

1280 x 1024

1366 x 768

1440 x 900

1600 x 900RB

1680 x 1050

1920 x 1080

31 469

31 469

35000

49726

68681

31 469

67500

45000

49702

63981

79976

47712

55935

60000

65290

67500

37861

37500

37879

48077

46875

48363

56476

60023

70 086

70 087

66667

74551

75 062

59 940

75 000

60 000

59810

60020

75 025

59790

59 867

60000

59954

60000

72809

75000

60 317

72186

75 000

60 004

70069

75029

25 175

28322

30240

57284

100000

25 175

108000

74 250

83500

108000

135000

85500

106500

108000

146250

148500

31 500

31 500

40000

50000

49500

65000

75000

78750

+/+

+/+

/+

+/+

+/+

+/+

/+

+/+

/+

+/+

+/+

/

/

+/+

/

/

+/+

+/+

/

/

/

/

Troubleshooting

If the TV seems to have a problem, samsung.com, then click on Support, first review this list of possible problems customer service and solution.

at 1-800-SAMSUNG.

If none of tiqese troubleshooting tips apply, visit

Flickering and Dimming

Component Connections /

Screen Celor

Screen Brightness

Unwanted Pewering off

Ifyour Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient features like the Eco Sensor er the Energy Saving feature. Fellow the steps below with your remote to turn these features off or on.

Energy saving : Menu _ Setup _ Eco Solution _ Energy Saving _Setect Settings

Eco Sensor : Menu _ Setup _ Eco Solution _ Eeo Sensor _Select Settings

Ifyou find that the color on your Samsung television 'Sscreen is not correct or black and white, first run a Self

Diagnosis Test on the %/to make sure there are no device issues.

Self Diagnosis : User Menu _ Support _ Self Diagnosis _ Picture Test

If the test is ek, try making sure ;

Your connections are all consistent. For example, if you've used the AV In jack on your T_, make sure you have used the AV Out jack on your video source.

Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your %/and video source, make sure yeu have connected the blue Pb jack on the video source to the blue Pb jack on the T_, the red Pr jack on the source to the red Pr jack on the %/.

Ifyou find that the colors on your Samsung %/are correct but just a little too dark or bright, there are some settings you should check before calling for a repair.

• Backlight, Contrast, Brightness, Sharpness, Celor, Tint and so on. Ge to "Picture" in the Menu, and then try adjusting these options.

Ifyour Samsung %/appears to turn off by itself, there may be an issue with either your Timer settings er your Eco friendly No Signal Power Off feature.

First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the %/still on knowing that it will turn off after a certain period of time and not waste energy.

• Sleep Timer : User Menu _ Setup _ Time _ Sleep Timer

Ifthe Sleep Timer is not activated, yeu may have engaged the No Signal Power Off or Auto Power Off feature.

• No Signal Power Off : User Menu _ Setup _ Eco Solution _ No Signal Power

• Auto Power Off : User Menu _ Setup _ Eco Solution _ Auto Power Off

+12+

Storage and Maintenance

_' If a sticker was attached to the TV screen, some debris can remain after _ou remove the sticker. Please clean it before watching the TV.

'_' The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.

product.

Any liquid that goes into the product may Cause a failure, fire, or

Do not Spray Water directly onto the electric Shock.

Clean the product With a soft cloth dampened with in a small amount of water. Do not use a flamrnab!e liquid

(e.g. benzene, thinners) or a cleaning agent,

License

srs_

TheaterSound

TheaterSound, SRS and the _ symbol are trademarks of SRS Labs, Inc.

TheaterSound technology licence from SRS Labs, Inc.

is incorporated under

SRS TheaterSound surround speakers, delivering r_ provides the most immersive sound experience while maintaining from the ,_/'s built-in steady rich bass and clear dialog.

volume and

_|

HD

V_[,.

DivX Certified@ to play DivX@ video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX@is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX

Certified@ device that plays DivX video. Visit divx. corn for more information and software tools to convert your files into DivX videos.

ABOUT DIVX VDEO-ON-DEMAND: This DivX Certified@ device must be registered in order to play purchased DivX Video-ore

Demand (VOD) movies. To obtain your registration code, locate the DivXVOD section in your device setup menu. Go to vod. divx.

corn for more information on hoM!to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673;

7,460,668; 7,515,710; 7,519,274 DivX@, DivX Certified@ and associated Iogos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

[]_ DOLBY

DIGITAL PLUS ]

Manufactured under license from Dolby Laboratories. Dolby and ttqe double-D symbol are trademarks of

Dolby Laboratories.

@ _

2.0+Di_ita_ Out

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All

Rights Reserved.

_ _ _

[]

The terms HDMI and HDMI High-Definition Multimedia later[ace, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License

Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email ([email protected]).

I_ This product uses some software programs which are distributed under the Independent JPEG Group.

ICU License - ICU 1.8.1 and later

COPYRIGHT AND PERMISSION NOTICE

Copyright (c) 1995-2008 International Business Machines Corporation and others All rights resewed.

Permission is hereby granted, free ef charge, to any person obtaining a copy ef this software and associated documentation files (the "Software"), to deal in the Software without restriction, including witheut limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Seftware, and to permit persons to whom the Software is furnished to do se, provided that the above copyright notice(s) and this permission notice appear in all copies ef the Seftware and that both the above cepydght notice(s) and this permission notice appear in supperting decumentatien.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESSOR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITy, FITNESS FORA PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT

HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FORANY CLAIM, OR ANY SPECIAL INDIRECTOR CONSEQUENTIAL DAMAGES, OR ANY

DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

Environmental

Considerations

OperafingTemperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-coedensing

+4°F to 113°F (-20°C to 45°C )

5% to 95%, non+condensing

Display Resolution

Screen Size

(Diagonal)

Sound

Output

Dimensions

_/x DxH)

Body

Withstand

40" Class

(40.0" measured diagonally)

46" Class

(45.9" measured diagonally)

50" Class

1920 x 1080

(49.5" rneasured diagenally)

55" Class

(54.6" measured

10W x 2 diagonally)

60" Class

(60.0" measured diagonally)

65" Class

(64.5" measured diagonally)

36.SX3.6X21.Sinches

(927.6X93.3X555.5

(mm))

36.5XS.9X23.Sinches

(927.6X227.6X606.5

(mm))

41.7X3.7X24.7inches

(1059.SX94.3X629.4

(mm))

41.7XS.9X26.7inches

1059.SX227.6X680.3

(mm))

44.7X3.7X26.Sinches

(1137.6X94.5X673.4

(mm))

44.7XS.9X28.5inches

49.2X3.TX28.9inches

(1250.6X94.3X735.7

(mm))

49.2X8.9X3t.0incP_s

(1137.6X227.6X725.0

(1250.6X227.6X789.2

(mm)) (mm))

54.0X3.7X31.7inches

58.4X3.SX34.4incP_s

(1374.1X94.3XS07.0

(ram))

(1484.5X96.3X873.8

(mm))

54.0X12.9X33.8inches58.4Xt2.9X36.4inches

(1374.1X329.SX859.0

(1484.5X329.8X926.5

(ram)) (mm))

Without Stand

With Stand

20.2 tbs (9.2 kg)

24.6 Ibs (11.2 kg)

26.4 tbs (12.0 kg)

30.8 tbs (14.0 kg)

34.3 tbs (t 5.6 kg)

40.1 tbs (18.2 kg)

45.6 Ibs (20.7 kg)

51.3 Ibs (23.3 kg)

54.6 Ibs (24.8 kg)

60.4 Ibs (27.4 kg)

62.3 Ibs (28.3 kg)

71.6 Ibs (32.5 kg)

Design and specifications are subject to change without prior notice.

This device is a Class B digital apparatus.

For information about power supply, and more about power consumption, refer to the label attached to the product.

Typical power consumption is measured according to Energy Star Program requirements for Televisions.

Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung,com/recyclingdirect or call, (877) 278-0799.

[] JACK PANEL DETAIL / REAR VIEW

(Unit: inches)

UN40EH6000/UN40EH6050

UN46EH6000/UN46EH6050

UN50EH6000/UN50EH6050

UN55EH6000/UN55EH6050

UN60EH6000/UN60EH6050

UN65EH6000/UN65EH6050

9.6

11.6

12.5

15.5

16.7

19.0

5.8

5.2

6.8

6.1

8.6

10.7

7.6

8.8

9.5

5.8

7.3

8.1

24.1

29.8

31.3

36.4

38.5

41.8

7.8

15.7

15.7

15.7

15.7

15.7

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your T_ Not responsible for typograpt_ical or printed errors.

© 2012 Samsung Electronics America, Inc

7.8

15.7

15.7

15.7

15.7

15.7

+15+ +16+