Yamaha MY8-DA96 Specifications

For details please contact:
www.yamahaproaudio.com
This document is printed on
chlorine-free (ECF) paper with soy ink.
Printed in Japan
A N e w Hi gh Poi nt i n Digit al Live So un d
Since its introduction in 2004 the Yamaha PM5D Digital Mixing
System. Although the PM5D was always expandable via
Console has become a common sight at concerts and live
Yamaha’s MY-series expansion cards and integration with
venues throughout the world. In fact, more than 2,000 units
digital systems such as DME64N and AD8HR, the DSP5D takes
have been shipped since that time. The reason? Simply that it’s
system scalability to a totally new level. In essence the DSP5D is
one of the most versatile, practical, reliable, and great-sounding
a complete PM5D without the control surface, doubling your
digital mixers in it’s class. But technology must evolve to meet
processing power and I/O capacity while allowing direct,
the changing needs of the field it serves, and the PM5D is no
seamless control from the PM5D V2 control surface. In fact you
exception. Over the years that the PM5D has been in service
can add up to two DSP5D units for a total of 144 mono and 24
the discerning pros who use it came up with quite a few
stereo input channels, and even use the DSP5D units on-stage,
valuable suggestions as to how it might be improved
connected to the console via a single Ethernet cable.
and expanded. The PM5D V2 is the result, loaded with new
features ranging from subtle refinements to seriously notable
The PM5D is a great live sound console, as attested to by its
innovations. And owners of the original PM5D aren’t excluded
popularity. But now with new features grounded in actual day-
from the good news: a free firmware update that is
to-day use, and scalability that makes it an excellent choice for
downloadable from Yamaha’s Pro Audio website will bring you
much larger applications, the PM5D V2 is poised to become an
right up to speed.
industry standard.
But there’s been another important development that makes
the PM5D V2 a major system player: the DSP5D Digital Mixing
2
3
Enhanced Features and Scalabilit y
The PM5D V2* includes numerous refinements and
innovations that significantly improve both its operability and
functionality. Almost all of these have been implemented on
the basis of feedback from experienced professionals in the
field, and provide improved functionality and performance
that makes a difference in real-world applications. PM5D V2
also offers full compatibility with Yamaha’s new DSP5D Digital
Mixing System units can not only double or triple the I/O
capacity of the PM5D V2 console with seamless control
integration, but also function as high-performance remote
mixing engines and stage boxes connected to the console via
a single Cat-5 Ethernet cable.
32-bit Internal Processing
Like the PM5D itself, all analog inputs and outputs are directly accessible via
DSP5D as a remote I/O with powerful DSP function the DCU5D Digital Cabling Unit
The PM5D V2 will handle 24-bit/96kHz audio without compromise. You won’t
standard XLR type connectors. After a few simple connections the DSP5D becomes
lets you locate the DSP5D as far as 120 meters* from the PM5D console,
sacrifice channels or any other processing capabilities whether the PM5D is run at
an integral part of the PM5D console, and can be controlled from the PM5D
connected only by one Cat-5 Ethernet cable. This dramatically reduces cabling
44.1, 48, 88.2 or 96-kHz. Internal processing is all 32-bit (using 58-bit
control surface in the same way as the internal functions. So although you have
requirements while maintaining solid audio and control reliability over extended
accumulators) to ensure that absolutely no loss of audio quality occurs at any
significantly upgraded the system, you can simply plug in your sources and output
distances.
point in the signal path.
devices and use it right away without having to work through another learning
curve. You can directly connect the DSP5D to a PM5D via standard cascade cables
High-capacity, Versatile Mix Performance
if they are to be used in relatively close proximity. But if you want to use the
* Refer to http://www.ethersound.com/technology/compatibility.php
DSP5D and DCU5D utilize EtherSound technologies. But because bandwidth is fixed exclusively for DSP5D and
DCU5D, they cannot be controlled by ES monitor.
The PM5D V2 can accommodate a total of 130 input connections (48 channel
inputs, four stereo inputs, five 2 TR IN’s plus four mini-YGDAI slots), and can
handle up to 64 inputs simultaneously. The 64 input mixing channels are
configured by default as 48 mono input channels, 4 stereo inputs, and 4 stereo
effect returns. By utilizing the internal patch bay and expansion slots you can
* Owners of the original PM5D or PM5D-RH can download the version-2 firmware
update from the Yamaha Pro Audio website at: http://www.yamahaproaudio.com/
instantly scene-switch between totally separate stage setups. In terms of busrouting capability you have 24 mix buses that can function as submasters or
auxiliary sends, in addition to the stereo A and B (or LCR) and CUE buses. There’s
also an 8- output mix matrix that is invaluable for setting up submixes for a variety
Choose the Front End that Suits Your Needs
of applications. Any of the input channels, mix buses, and matrix buses can be
Customers have a choice of two front-end configurations. The PM5D V2 includes
assigned to the console’s 8 DCA faders for extraordinarily flexible group control.
48 XLR/balanced TRS analog mono inputs with manual mic preamps, plus
mono inputs with recallable mic preamps with 4 stereo inputs that will accept mic
DSP5D Digital Mixing System Compatibility for
Doubled or Tripled Capacity
level signals. The choice will depend on your needs and budget, and whether you
If you need more I/O capacity and processing power than the PM5D V2 provides
need to store and recall the analog gain settings in the same way as other
alone, you can add Yamaha DSP5D Digital Mixing System units that provide
parameters. Whichever model you choose, you are assured of the best sound
essentially all the functionality of a PM5D-RH V2 in a rack-mountable unit that can
quality available. Both superb mic preamps convey the most delicate nuances of
be seamlessly controlled from a PM5D (RH) V2 console. Up to two DSP5D units
the input signal right down to the smallest details. In this brochure “PM5D V2”
can be used with a single PM5D V2 console. A PM5D V2 plus one DSP5D gives you
refers to features common to both configurations, unless otherwise noted.
a total of 96 mono and 16 stereo input channels, while adding two DSP5D units to
additional 4 stereo line level inputs. The PM5D-RH V2 includes 48 XLR analog
a PM5D V2 provides 144 mono and 24 stereo input channels to comfortably
Easily Manageable Size and Weight for Touring or
Installations
handle large-scale applications. And of course your processing power is doubled
PM5D-RH V2
or tripled, respectively.
On the surface the PM5D V2 may look like a streamlined 24-channel console, but
it is actually much, much more: a total of 130 input connections, simultaneous
In terms of I/O capacity and processing capability a single DSP5D offers:
PM5D V2
mixing of up to 64 inputs to stereo or LCR stereo, and 24 mix buses with
4
extraordinary versatility, all with 500-scenes of total recall. Plus you have the
■ 48 mono and 4 stereo inputs.
equivalent of several racks full of first-rate processing gear onboard (56 Gates, 92
■ 24 Mix buses (cascaded to the PM5D V2 mix buses).
Comps, 97 Delays, 12 GEQs, 8 units of SPX2000 class multi effects, and more).
■ 8 Matrix buses.
Add advanced digital patching capability, sophisticated monitoring, surround
■ 24 Omni Outputs.
panning from 3-1 to 6.1, and a wealth of features that contribute to unprecedented
■ Full channel functionality: gain, EQ and filters, dynamics, sends.
operational ease and efficiency. The fact that all of this is housed in a 950mm x
■ 8 effect processors and 12 graphic equalizers.
1551mm foot print console that weighs less than 98kg, powered by a 3U external
■ 2 mini-YGDAI expansion card slots.
power supply that weighs only 10kg, is simply staggering. If you’ve been touring
■ Full compatibility with DSP5D Editor computer software.
with traditional equipment you’ll appreciate the dramatically reduced setup time
■ The ability to function as a remote DSP processor and I/O expansion
and effort required by this groundbreaking console. If you’re equipping an
unit via the DCU5D Digital Cabling Unit. The ability to function as a
installation you’ll love the reduced installation and maintenance costs, as well as
remote DSP processor and I/O expansion unit via the DCU5D Digital
all the space you’ll save.
Cabling Unit.
DCU5D
DSP5D
5
All the Effects and Processing You’ll Need Onboard
Scene Recall
Expansion Slots for Added Connectivity
Extra EQ
The PM5D V2 offers every processing facility you’ll ever need onboard. Every input
On the PM5D V2, all parameters are recallable in up to 500 scenes, so you can
Four rear-panel mini-YGDAI expansion slots allow you to use a range of MY series
The PM5D’s eight SPX2000-class internal effect processors offer a vast amount of
channel has 4 band EQ plus a high pass filter, a separate gate and compressor, and
instantly key to the perfect mix. This type of repeatability is particularly important
expansion cards to enhance the PM5D V2 in a number of ways. You can, for
DSP power. But since not every application requires full use of eight powerful
delay of up to 1000 milliseconds. The stereo and mix outs have 8-band EQ,
in high-turnover applications where you might need to accommodate a number of
example, use the added I/O capability to connect to and remotely control high-
effect processors, some of that power may go unused. In version 2 that potential
compressor, and delay. The matrix outs have 4 band EQ, compressor and delay.
totally different acts every day. It can also make life much easier in one-act touring
performance Yamaha AD8HR 8-channel A/D with microphone preamplifiers. You
can be put to good use in providing additional graphic and parametric EQ units.
The cue and monitor outs also include delay. But the PM5D V2 doesn’t stop there!
applications, leaving you more time to optimize the mix for individual venues.
could also significantly expand your audio processing capabilities by cascading to
The PM5D V2 offers a plentiful supply of independent equalizers for input and
It features twelve 31-band GEQs and eight independent SPX2000- class multi-effect
There is also a flexible recall safe function that enables on-the-spot cancellation
a DME64N Digital Mixing Engine. You can have 64 matrix outs, and control
output processing, but every engineer runs up against situations in which no
processors that can be patched into any of the console’s input, stereo, mix, or
and alteration of the pre-programmed settings.
additional GEQ, Master fader, Cross Over, Delay and Matrix Mixer components
amount of EQ seems to be enough. That’s where the expanded EQ capability
created on DME64N from PM5D. Or you could cascade-connect to another PM5D
provided by this new feature will really shine.
matrix channels, offering a comprehensive range of reverb, delay, modulation, and
combination effects. The PM5D V2 also comes with Yamaha’s incomparable ADD-
HA Library
V2 bi-directionally (up to 4 units uni-directionally) to create a huge system, or
ON EFFECTS built in! You have immediate access to acclaimed REV-X Reverb
Another important feature on the PM5D V2 is an HA library that, on the PM5D-RH
other Yamaha digital mixers such as the DM2000 or DM1000 for submix
Solid Security
programs as well as the Compressor276, Compressor260 and EQ601 programs
V2, allows the gain and other parameters of the internal microphone preamplifier
applications.
Although the original PM5D offered plenty of security-oriented features, version 2
from the AE-011 Channel Strip package and the Open Deck programs from the AE-
to be recalled in one operation. The HA library is also an advantage on both the
021 Master Strip package.
PM5D V2 and PM5D-RH V2 when remotely-controllable preamplifiers such as the
Virtual Soundcheck
widest possible range of applications. A new Load Lock function, for example,
Yamaha AD8HR are connected via the console’s expansion slots.
Here’s a perfect example of a version-2 feature that has been implement in
makes it impossible to inadvertently load data that might change critical settings
response to feedback from the field. With a multi-track recording system such as
from external memory or the PM5D Editor. There’s also an Output Isolation
Advanced, Intuitive User Interface
provides even greater security that will keep the system operating properly in the
The PM5D V2 features interface technology developed and refined through an
Surround Ready
Steinberg’s Nuendo DAW, the PM5D V2 can not only be used to make top-quality
feature that allows full input channel control while preventing scene recall
impressive lineup of digital consoles, including the PM1D. Here are a few
The PM5D V2 is equipped with 3-1, 5.1 and 6.1 surround modes. You can easily
live recordings, but a live recording made during a rehearsal or performance can
operations from changing output compression, delay, EQ, fader, patching, and
highlights:
set up surround channels on the mix buses, and panning can be controlled via
be temporarily patched to the console’s inputs and used for setup and adjustment
other output parameters that needs to remain constant even through band or
the track pad or by using dedicated control devices connected via the MIDI or
when the musicians or performers aren’t available. The results of this “Virtual
program material changes. You can specify any or all of the output parameters you
GPI port.
Soundcheck” can then be directly saved to a scene without the need for complex
want protected. And you can now assign “read-only” status to specific scenes to
channel strip is assigned to the console’s SELECTED CHANNEL controls for real-time
re-patching or fear of accidental changes to setting. And unlike similar features
prevent them from being overwritten by store, load, or edit operations.
adjustment of a dazzling array of parameters. When you edit a parameter via a
found in other consoles, the PM5D V2 lets you assign individual channels to the
SELECTED CHANNEL control block, the corresponding display is automatically called to
Virtual Soundcheck function as required, so you can keep sound effect or BGM
Channel Move Function
the console’s large LCD display for even further editing precision and versatility.
channels alive while doing a sound check.
This seemingly simple function can be a huge advantage when revising a channel
Selected Channel: Press the SEL key on any input or master channel and that
layout plan. Mono and stereo input channel setups can be “moved” to any other
Mix Send Select: With the PM5D V2 “vertical” and “horizontal” signal control
Expanded Dynamics Capability
channel in one simple operation so you don’t have to spend time re-entering all of
corresponding to channel and buss flow on a conventional analog console is intuitive
Next to level control and equalization, dynamics processing is one of the most
the related channel settings, including patch and HA settings.
and efficient. For example; Press the MIX SELECT key corresponding to the desired mix
critical requirements for achieving optimum mix quality. That’s why the original
SURROUND SETUP
bus, and the send levels to the selected bus can be adjusted directly via the channel
PM5D console included sophisticated compressors, expanders, and companders
strip encoders. If the MIX MASTER MIX SEND key is engaged, the send level from the
on every channel. The PM5D V2 goes a step further by adding flexible de-essers
current SELECTED CHANNEL input to all 24 mix busses can be adjusted via the MIX
L
R
L
C
master encoders.
L
C
R
LFE
S
Encoder Mode: The input channel encoders can be assigned to mix send level,
panning, input gain, or alternate layer input level, enabling the operator to adjust all
R
STEREO
3-1
L
C
R
isolating and compressing vocal sibilance.
LFE
Ls
Rs
5.1
Ls
that can significantly enhance the quality of vocal and speech channels by precisely
Bs
Rs
6.1
input channel levels without changing layers.
Flip: When this key is engaged the functions of the input strip faders and encoders are
reversed ... this is great when you want to use the faders for fine control of a parameter
normally assigned to the encoders, which is ideal when using PM5D V2 for monitor
applications. The interface advantages are extensive, and extend to details that can
make a significant difference to work efficiency and comfort. Also there are connectors
for mouse and keyboard: great assistance when you have to type in numerous
characters while setting up patches and scenes.
6
7
Elegant, Efficient, and Eminently Prac tical
Everything you need for hands-on mix control is right where you need it. The PM5D V2 physical control surface offers direct access
to all of the major functions you’re likely to need for just about any real-world application. And if you’re using one or two DSP5D
Digital Mixing System units for I/O and DSP expansion, you get seamless, comprehensive control directly from the PM5D V2 panel.
@RCL and MUTE SAFE Indicators
#Channel Fader
$CUE Key
The RCL SAFE LED lights when the channel is set to the
recall safe mode so that it will not be affected by scene
recall operations. The MUTE SAFE mode prevents the
channel from being affected by mute group operations.
These very smooth and quiet 100mm motorized faders
control and display the channel input level, or the send level
to the selected mix bus when the FADER FLIP mode is on.
Sends the channel signal to the cue bus for monitoring
according to the currently selected cue mode: LAST CUE,
MIX CUE, or SOLO and various function settings.
Mic Preamp Controls
Input Patching
Stereo Input Channels
While the PM5D V2 manual microphone preamplifiers have
physical phantom power, pad, gain, and insert switching
controls, the PM5D-RH’s recallable mic preamplifiers allow
access to the same parameters via the console’s encoders
and software. Both models offer peak and signal indication
LEDs for easy visual input level monitoring. If you’re
connected to a DSP5D Digitial Mixing System you have
complete control of its mic preamps directly from the
PM5D V2 console as well.
Although physical input jacks 1 through 48 on the rear panel of the PM5D
are connected to the corresponding internal channels by default, digital
patching provides total assignment freedom. You won’t have to run around to
physically re-patch cables whenever you need to reconfigure the system. The
same goes for the inputs on a connected DSP5D Digital Mixing System. Onscreen patch displays allow the system’s inputs and outputs to be patched to
appropriate I/O points and you can also assign and display channel names
for easy identification. Patch setups you might want to use again can be
stored in the patch library for instant recall at any time.
The stereo input channels are essentially the
same as the mono input channels, except that
they have stereo level meters, and ST IN 1-4 and
FX RTN 1-4 keys that assign the strips for stereo
input channel or stereo effect return operation.
ENCODER MODE & FADER
FLIP Keys
The ENCODER MODE keys determine the
function of the rotary encoders at the top of the
console’s channel strips: send level to each of
24 mix buses, channel pan, input gain of the
recallable head amps in the PM5D-RH V2 (or
connected remote recallable head amplifiers)
or attenuation after A/D conversion, and input
fader level of alternate (unselected) layer. The
FADER FLIP key swaps the functions assigned to
encoders and faders. For example, if you
engage the FADER FLIP key when MIX SEND is
selected, the channel-strip faders adjust the mix
send level while the encoders adjust the
channel input level.
INPUT PATCH
Channel Strip Controls
3
2
4
1
6
SELECTED CHANNEL Controls
5
1EQUALIZER & HPF
7
8
A flexible 4-band equalizer section with high and low bands switchable for shelving or
peaking response, variable frequency and Q on all bands, and an independent variablefrequency HPF. Since 8-band EQ is provided for output channels, UPPER and LOWER keys
are provided to assign control to the upper or lower four bands.
9
1Layer Select Keys
The CH 1-24 and CH 25-48 layer select keys
Turns encoder assigned functions on or off. For
example, it can be used to switch the send to the
mix bus on or off.
The TO STEREO indicator lights when the
channel signal is feeding the stereo mix bus. The
GATE indicator lights when the channel gate is
closed, lights dimly during gate attack or decay,
and goes out when the gate is open. The COMP
indicator lights when the channel compressor is
applying gain reduction, lights dimly during
compressor attack or decay, and goes out when
no gain reduction is being applied.
3PRE Key
6SEL Key
Selects pre or post mix send.
Assigns the corresponding channel to the
console’s SELECTED CHANNEL control section
and to the built-in LCD display. The SEL keys can
also be used to assign channels as stereo pairs.
determine whether the console’s 24 physical mono
channel strips control channels 1 through 24 or 25
through 48. Additional layers can be accessed when
#
)
the PM5D is connected to one or two DSP5D units.
2ENCODER ON Key
!
@
$
8
5 TO STEREO, GATE, and COMP
Indicators
4Rotary Encoder
The function of the channel strip rotary
encoders is determined by the ENCODER MODE
keys (Refer to the Encoder Mode & Fader Flip
Keys at the opposite page). They can function as
mix send level controls, channel pan controls,
head amplifier gain or attenuation controls, or
as alternate-layer level controls.
7Channel Name Display
This 4-character display shows the assigned
name for the corresponding channel. The name
dims when the channel is muted.
2STEREO
8CH ON Key
The STEREO section allows the currently selected channel signal (input, stereo input, effect
return, mix) to be routed to the stereo bus with pan control.
Turns the corresponding input channel on
or off.
3COMPRESSOR
9Meter
This is a full-featured compressor/expander/compander/de-esser module with independent
threshold, range, attack, release, knee and ratio parameters. Like the noise gate section, the
compressor section includes a six-segment gain reduction meter for convenient visual
monitoring.
A 6-point LED meter displays the channel
input level.
)DCA Indicators
The console’s input channels can be
assigned to any of 8 DCA. The DCA LEDs
indicate the DCA faders to which the channel
is assigned.
!MUTE Indicators
Input channels can be assigned to eight
mute groups for versatile mute control. The
MUTE LEDs indicate the mute groups to
which the corresponding channel is
assigned.
4DELAY
6NOISE GATE
Turns the channel delay on or off, and sets the delay time
from 0 to 1,000 milliseconds for the selected input
channel.
Extremely versatile noise gate provides effective noise
suppression, ducking, and other gate functions. Extensive
control is provided with independent threshold, range,
attack, hold, and decay parameters, as well as key-ins and
key-in filters.
5GAIN/ATTENUATION/Ø
When the GAIN/ATT key is on the encoder adjusts the gain
of a recallable microphone preamplifier patched to the
input of the selected channel. When the GAIN/ATT key
indicator is off the encoder adjusts attenuation for the
selected channel. The Ø key inverts the phase of the
selected channel.
7GROUP
This section controls channel to DCA and MUTE group
assignments. The DCA keys assign the currently selected
input channel to one or more of the DCA faders, while the
MUTE keys assign the currently selected input channel to
one or more of the eight available mute groups. The
GROUP section also includes RECALL SAFE and MUTE
SAFE assign keys that engage or disengage recall safe
and/or mute safe status for the currently selected input
channel.
8CHANNEL SELECT
This section can be used to select the channel to which the
SELECTED CHANNEL controls will apply. COPY and PASTE
function are also included, making it easy to copy all
parameters from one channel to any other channel.
9
Flexible M ixing For Any Application
Co m p re h e n s i ve M o n i to r i n g Fa c i l i t i e s
In addition to dual stereo mix buses that can be used together for LCR send, the PM5D V2 offers 24 independent mix buses that
you can use for submix, auxiliary, effect, or just about any other type of send your application requires ... all with master mix control
as well as individual mix send level control from all available inputs. All mix buses have 8-band EQ, compression, and delay that you
can control via the SELECTED CHANNEL controls to optimize your submix signals. And if that isn’t enough, there’s also an 8-output
matrix mix for the mix and stereo buses (also equipped with EQ, compression and delay!) on the PM5D V2, plus an additional 8
matrix buses on each DSP5D unit you use. Once you’ve created all the submixes you need, you can group them, as well as the input
channels, by assigning them to the very versatile DCA faders.
Staying in touch with your sound is vital to create the perfect mix. The PM5D’s in-depth cue, monitor and metering facilities let you
hear what’s happening at any point in the mix with maximum ease and efficiency.
MIX Send/Master Controls
Independent MIX control blocks are provided for the mix buses. When the MIX SEND key is
engaged, the MIX encoders adjust the send level from the selected channel to the
corresponding mix buses. When the MIX MASTER key is engaged the encoders function as
master level controls for the corresponding mix buses. You can still use the channel-strip
encoders to adjust mix send level by using the MIX SEND SELECT keys to specify the
destination mix bus. The MIX blocks also include ON keys to turn the corresponding send on
or off, TO STEREO and TO MTRX LEDs to indicate assignment to the stereo and matrix
busses, PAIR LEDs that indicate paired mix sends, and CUE and SEL keys that assign the
corresponding MIX signal to the SELECTED CHANNEL controls when the MIX MASTER mode
is engaged. When an odd-even numbered pair of mix bus sends is assigned as a stereo pair,
the odd-numbered encoder functions as a pan/balance control while the even-numbered
encoder sets the send level for the pair. The MIX controls can be assigned to DCA groups 7
and 8, so a pair of DCA assignment indicators is also provided.
DCA Faders
A complete set of level meters is provided on the console panel. Layer select keys let you
monitor any input channel layer plus the stereo inputs or effect returns. The MIX/MATRIX
key allows visual monitoring of the mix buses and matrix outputs. Individual stereo meters
are also provided for the STEREO A, STEREO B, and CUE buses. A PEAK HOLD key engages or
disengages the meter peak hold function. In addition, a comprehensive range of meter
facilities are provided via the LCD display showing all inputs, outputs, input gain reduction
and output gain reduction. Flat meters won’t obstruct the engineer’s view of the stage.
MONITOR
The PM5D V2 MONITOR section offers a range of monitor source selection keys: 2 Track In
Analog 1 and 2, 2 Track In Digital 1 through 3 (all with sample rate converters), STEREO A
and B for the console’s stereo busses (these buttons can be pressed simultaneously to allow
LCR monitoring), and a DEFINE key that can be assigned to select any source. Also USER
DEFINED KEYS can be assigned for this purpose, so you can monitor-select as many sources
as you like at the touch of a button. Individual level controls are provided for the MONITOR
OUT and PHONES outputs.
Right of LCD
MATRIX/ST ROUTING
STEREO Faders
MIX to MATRIX VIEW
Any input or output channels can be assigned
to any of the console’s eight DCA faders for
convenient grouping. Each DCA strip also
includes a four-character name display as
well as MUTE and CUE keys for convenient
muting and cue monitoring of the
corresponding DCA signal. The faders can
also be used to control individual bands of
the internal graphic equalizers. In fact, you
DCA GROUP ASSIGN (In)
can assign a variety of functions to the DCA
faders that can be instantly recalled via the FADER MODE keys. You could, for example,
assign input channel level control to the DCA faders so you have simultaneous control of 32
channels instead of the normal 24. Or you could assign mix master levels, matrix levels ...
whatever you need to work in the most productive, efficient manner for the job at hand.
10
Level Meters
The PM5D V2 provides three cue and solo modes: Mix Cue, Last Cue, and Solo. The PM5D V2
cue system additionally provides four types of cue monitoring: INPUT CUE, DCA CUE,
OUTPUT CUE, and EFFECT or GATE KEY IN CUE with various function settings. There is also a
CUE INTERRUPT function that lets you select whether the MONITOR OUT signal will be
affected by cue/solo operation or not. This last function can be extremely useful in broadcast
applications.
Left of LCD
MATRIX Controls
The MATRIX controls comprise an 8-channel
submix matrix from the mix and stereo buses.
Each matrix module features a level encoder,
ON key, CUE key, and SEL key which assigns
that channel to the SELECTED CHANNEL
controls. Like the MIX bus controls, the
MATRIX controls can be assigned to DCA
groups 7 and 8, so a pair of DCA assignment
indicators is provided. PAIR LEDs indicate
paired matrix controls. When an odd-even
numbered pair of matrix controls is assigned
as a stereo pair, the odd-numbered encoder
functions as a pan/balance control while the
even-numbered encoder sets the send level
for the pair.
CUE & SOLO
The master stereo faders control the output
from the console’s STEREO A and STEREO B
buses. In addition to the faders the STEREO
strips include channel ON keys, TO MTRX and
COMP LEDs, CUE keys, and SEL keys which
assign the corresponding STEREO bus signal
to the SELECTED CHANNEL controls. The
DCA GROUP ASSIGN (Out)
STEREO OUTPUT block also features RECALL
SAFE and MUTE SAFE LEDs similar to those on the input and output channels, and DCA 7 and
8 LEDs that indicate assignment to the corresponding DCA faders. The STEREO B strip
additionally features a MONO key that sums the STEREO B channels to a mono signal that
can serve as the center channel for LCR configurations.
MONITOR
TALKBACK
In addition to the talkback microphone signal, the PM5D V2 TALKBACK setup display allows
the signals from any one of the AD inputs to be mixed with the microphone signal, and the
TALKBACK destination can be assigned freely to any of the output ports. The TALKBACK ON
button can be set for latched or unlatched operation.
Output Patching
As with input patching, all outputs can be conveniently patched to just about anywhere you
need them via the LCD display screen patch matrix without having to physically re-patch
cables. The mix outputs, stereo outputs, matrix outputs, mono and stereo channel insert and
direct outs, oscillator output, talkback output, and monitor outputs can be patched to the
console’s mix outputs, cascade outputs, option slot outputs, and any of the three 2TR digital
outputs. Send to internal effects can be patched anywhere from the MIX outputs and INSERT
OUT points. Inputs and outputs on connected DSP5D units can be patched directly from the
PM5D V2 in the same way and just as easily as the console’s own inputs and outputs.
TALKBACK
11
E x tens i ve Ana l og and Digit al Co n n ec t ivit y
The PM5D V2, PM5D-RH V2, and the DSP5D all provide comprehensive analog and digital connectivity that makes it easy to set up
just about any type of system without requiring external interfacing. Flawlessly bridging the gap between the analog and digital
worlds are high-performance analog-to-digital and digital-to-analog converters that provide totally transparent conversion.
・ ST IN Connectors
The PM5D-RH V2 and DSP5D ST IN connectors accept both line and microphone input,
while the PM5D V2 ST IN connectors accept line-level input only.
PM5D V2 Connectors
ST IN Connectors
DSP5D Connectors
WORD CLOCK Connectors
Input/Insert Connectors
MIX OUT Connectors
* MIX OUT Connectors of PM5D V2 can be used as OMNI OUT connectors.
2TR IN ANALOG Connectors
OUTPUT Connectors
POWER INPUT
MONITOR/CUE/STEREO A, B/MATRIX
Connector
MIDI Connectors
RS422 Connector
GPI Connector
HA REMOTE Connector
TO HOST (USB) Connector
PM5D-RH V2 Connectors
Master Phantom On/Off Switch
2TR OUT DIGITAL Connectors
2TR IN DIGITAL Connectors
CASCADE IN/OUT
(D-sub 68pin)
INPUT
ST IN
OMNI OUT
Expansion Slots for mini-YGDAI cards
CASCADE IN Connector
CASCADE OUT Connector
TIME CODE Connector
Input Connectors
ST IN Connectors
WORD CLOCK
IN/OUT
NETWORK Connector
DC POWER INPUT
CASCADE IN/OUT (CAT 5)
Expansion Slots for mini-YGDAI cards
DCU5D Digital Cabling Unit
PW800W Power Supply
PSL120 Power Supply Link Cable
You can directly connect the DSP5D to a PM5D V2 via standard cascade cables if they are to be used in relatively close proximity. But if you want to use the DSP5D as a powerful on-stage DSP and
I/O expansion unit the DCU5D Digital Cabling Unit lets you locate the DSP5D as far as 120 meters* from the PM5D V2 console, connected only by one Cat-5 Ethernet cable. The DCU5D converts the
PM5D V2 cascade signals (68-pin D-sub connector) to and from Cat-5 audio, dramatically reducing cabling requirements while maintaining solid audio and control reliability over extended
distances. For maximum power reliability the DCU5D also features a 4-pin XLR connector that will accept standard external power supplies for failsafe redundant operation.
The PM5D V2 is reliably powered by an external power supply unit. The PW800W is extremely
compact and lightweight (3U, 10kg). Thanks to its high efficiency, the low speed cooling fans
are extremely quiet. PW800W accepts 100 - 240 volts so it can be universally used. The
PW800W can also be used as a secondary “redundant” power supply for the DSP5D.
Two PW800W units can be serially connected using the optional PSL120 cable for failsafe
operation.
* Refer to http://www.ethersound.com/technology/compatibility.php
DSP5D and DCU5D utilize EtherSound technologies. But because bandwidth is fixed exclusively for DSP5D and DCU5D, they cannot be controlled by ES monitor.
Front
12
Rear
13
E n h a n ce d E f f i c i e n c y & O p e ra b i l i t y
DIRECT RECALL/
MUTE MASTER
These are the features that make a difference in workflow and efficiency. On the PM5D V2 they attest to the fact that Yamaha has
really listened to feedback from the field, and implemented refinements that make sense in real-world applications.
These eight keys can be used either to directly recall
assigned scene numbers, or to mute the
corresponding mute groups. The DIRECT RECALL
and MUTE MASTER LEDs indicate which function the
keys are currently assigned to.
Lamp Dimmer and LED, LCD Brightness Control
The lamp dimmer controls the brightness of the LA1L gooseneck
lamps. Parameter visibility can be an issue, depending on your work
environment. The PM5D V2 lets you control the brightness of the LCD
screen and also all of the LEDs on the control surface in 8 steps. At
outdoor events, you might want to turn the brightness of the PM5D V2
indicators up high. Lower brightness is more appropriate in dark venues, where a bright
display may distract nearby audience members. PM5D V2 even has a “Panel Assistance
Mode” in which “off” LEDs are dimly lit to assist the operator to see the surrounding keys
and signs in a very dark operational environment (where the use of gooseneck lamps are
prohibited).
SCENE MEMORY
Scene recall has become one of the most indemand features of digital consoles because of
the enormous boost in productivity it can
provide. The PM5D V2 offers storage and
recall capacity for up to 500 scenes. Scenes
can be recalled via the SCENE MEMORY
section keys, the DIRECT RECALL keys, the
USER DEFINED KEYS, the scene management
display, or external control such as MIDI or
GPI. Scenes can be protected so that they can’t
be inadvertently overwritten. Recall safe
function can be applied to parameters you
don’t want to be affected by scene recall
operations, or alternatively you can make
Selective Recall to recall the wanted
parameters only. There’s a PREVIEW mode
that lets you visually confirm the contents of
recalled scenes before actually applying the
changes to the console, and an UNDO key lets
you quickly undo an unwanted scene recall.
SCENE
RECALL SAFE
Large LCD Display
Although PM5D V2 can be operated without relying on the LCD display, the 10.2inch 600 x 800 dot color LCD display provides easy-to-read graphics and multiple
parameter views. It is particularly useful when you want to dig in and do in-depth
programming and editing to take full advantage of this remarkable console’s
capabilities, as well as when changing patch, utility, and other settings.
Event List
USER DEFINED KEYS
DISPLAY ACCESS Keys
The DISPLAY ACCESS keys determine which type of data will be shown on the LCD
panel. A total of 24 categories are provided in logical groups, letting you access a
particular type of data directly. If you want to set up an input patch, for example,
simply press the PATCH key in INPUT group to call up the appropriate display.
These 25 keys can be assigned to control just about any functions you choose, for example, to
individually mute outputs, bookmark LCD display menu, for external machine control or effect tap
tempo. USER DEFINED KEY number 25 is located separately from the other 24 keys, next to the FADER
MODE buttons, and is conveniently assigned to scene increment operation ... but you can reassign it to
perform any function you require.
TRACKING RECALL
The Event List allows existing scenes to be
freely assigned as events in a list. This not only allows scenes to be lined up for recall in any
required order, but it also allows the scenes to be recalled at specified times in a time code
signal generated by external equipment or by the PM5D V2 itself.
Data Entry Controls
PCMCIA Card Slot
Set up your mixes, dump your data to a Compact Flash memory card using PCMCIA adapters
and you can easily transfer it to another PM5D V2 console, or keep it safe for reloading into
the same console at a different time or venue. Engineers can travel worldwide with just one
memory card in their pocket! The PCMCIA card slot will also be used for future firmware
updates.
This section includes cursor keys,
INC/DEC keys, data wheel, and a
trackpad for versatile, easy data
entry when editing via the LCD
display. If you prefer to work with
a keyboard and mouse,
appropriate connectors are
conveniently provided under the
front armrest pad.
USER DIFINED KEY
14
15
Libraries
Internal Effect Processors
Acclaimed VCM & REV-X Effects Built In
HA REMOTE Control Output
Setting up the entire PM5D V2 system from scratch can be a formidable task, so Yamaha has
provided an extensive selection of presets in a range of libraries that can simply be selected
and used as they are or modified to suit specific requirements. Of course, your own setups
can be added to the libraries for instant recall whenever they are needed. Here’s a list of the
available libraries:
The PM5D V2 is equipped with eight SPX-class and VCM (Virtual Circuit Modeling) effect
processors that can be patched into any of the console’s input, stereo, mix, or matrix channels,
offering a comprehensive range of reverb, delay, modulation, and combination effects.
Previously available as options for Yamaha digital mixing consoles, a number of our topperformance Add-on Effects programs are now provided in the PM5D V2. You can edit, store
and recall the Add-on Effects on the console in the same way as the standard internal effects.
In addition, a special GUI is available in the PM5D editor to manage these effects.
The extraordinary quality of many of the Add-on Effects is due to the innovative VCM
technology they employ. VCM (Virtual Circuitry Modeling) technology actually models the
characteristics of analog circuitry - right down to the last resistor and capacitor. VCM
technology goes well beyond simply analyzing and modeling electronic components and
emulating the sound of old equipment, and is capable of capturing subtleties that simple
digital simulations cannot even approach.
This connector provides control signals for remote control
of an external microphone preamplifier such as the Yamaha
AD8HR 8-channel A/D microphone preamplifier. The
AD8HR’s mic preamp gain can be remotely controlled in
steps of 1dB directly from the PM5D V2. There’s also a high
pass filter and phantom power supply integrated into each
channel that can be turned on and off by remote control.
The filter’s cut-off frequency is also remotely adjustable. This
Head Amp Remote Control function makes it possible for the
AD8HR to be used as a stage box. In addition to the many
advantages that this offers, digital connection of the AD8HR
and PM5D V2 using an AES/EBU cable reduces analog wiring
requirements to the bare minimum.
Name
Scene Memory
Input Patch Library
Output Patch Library
Input Channel Library
Output Channel Library
Input EQ Library
Output EQ Library
GATE Library
COMP Library
Effect Library
GEQ Library
HA Library
Number
Preset 1 + User 500
Preset 1 + User 99
Preset 1 + User 99
Preset 1 + User 199
Preset 1 + User 199
Preset 40 + User 159
Preset 3 + User 196
Preset 4 + User 195
Preset 36 + User 163
Preset 55 + User 144
Preset 1 + User 199
Preset 1 + User 199
Total
501
100
100
200
200
199
199
199
199
199
200
200
■ Effect List
REVERB HALL
REVERB ROOM
REVERB STAGE
REVERB PLATE
EARLY REF.
GATE REVERB
REVERSE GATE
MONO DELAY
■ CHANNEL STRIP Compressor Programs (Effect No.49~53)
STEREO DELAY
CHORUS
MOD. DELAY
FLANGE
DELAY LCR
SYMPHONIC
ECHO
PHASER
Graphic Equalizers
The PM5D V2 provides twelve dedicated 31-band graphic equalizers for output processing,
and more are available via the internal effects when necessary. The graphic equalizers are
ideal for use whether you need a subtle overall response adjustment or a more dramatic
boost or cut in a limited frequency range. Each equalizer also features a spectrum analyzer
display. For easy setup the console’s DCA faders can be assigned to directly adjust the GEQ
bands in 8-band groups via the FADER MODE keys.
AUTO PAN
TREMOLO
HQ PITCH
DUAL PITCH
ROTARY
RING. MOD.
MOD.FILTER
DISTORTION
This group of effects includes 5 models that employ VCM (Virtual Circuitry Modeling)
technology to recreate the sound and characteristics of several classic compression and EQ
units from the 70’s. Compressor 276 (mono) and Compressor 276S (stereo) recreate the
fast response, frequency characteristics, and tube-amp saturation of the most in-demand
analog compressors for studio use. Compressor 260 (mono) and Compressor 260S (stereo)
feature faithful modeling of the solid-state VCA and RMS detection circuitry of the late 70’s
for live sound reinforcement applications. And Equalizer 601 delivers the unique
characteristics of 70’s analog EQ circuitry, featuring graphical editing capability on both the
console and PC displays.
Compressor 260 (mono) /
Compressor 260S
Compressor 276 (mono)
Compressor 276S
EQ601
AMP SIMULATE
REV+CHORUS
GEQ PARAMETER
DYNA.FILTER
REV->CHORUS
DYNA.FLANGE
REV+FLANGE
DYNA.PHASER
REV->FLANGE
GEQ ASSIGN
REV+SYMPHO.
REV->SYMPHO.
REV->PAN
DELAY+ER
DELAY->ER
DELAY+REV
DELAY->REV
DIST->DELAY
■ MASTER STRIP Open Deck Programs (Effect No.54)
Virtual Circuitry Modeling technology is employed to recreate both the analog circuitry and
tape characteristics that shaped the sound of open-reel tape machines from the “golden age”
of recording. Models of four machine types are included: Swiss ’70, Swiss ’78, Swiss ’85, and
American ’70. You can even combine different record and playback decks for a wider range
of variation. You also have a choice of “old” and “new” tape types, tape speed, bias, and EQ
settings that can vary the “focus” of the sound, distortion, and saturation characteristics.
American ’70 with New
Swiss ’85 with New
Swiss ’70 with New
■ REV-X Reverb Programs (Effect No.46~48)
MULTIFILTER
FREEZE
STEREO REVERB
M.BAND DYNA
M.BAND COMP
REV-X HALL
REV-X ROOM
REV-X PLATE
The REV-X programs feature the richest reverberation and smoothest decay available, based
on the REV-X algorithms first introduced in Yamaha’s SPX2000 Professional Multi Effect
Processor. The Hall and Room programs have a very open sound, while Plate delivers a
brighter tonality that is ideal for vocals.
HA
HA LIBRARY
Operation Lock
The Operation Lock function prevents accidental or
inadvertent operation by requiring a password for access.
Internal Oscillator
The internal oscillator provides 100Hz, 1kHz, and 10kHz
sine-wave signals as well as pink and burst noise. Sine waves
of different frequencies can be sent to the left and right
channels for effective setup checks.
SECURITY
GPI Interface
A 4-input 12-output General Purpose Interface is provided
on PM5D V2 to provide control interoperability with a wide
range of sound and studio equipment - fader start and talk
back on/off are just two examples. The USER ASSIGNABLE
KEYS can be assigned to trigger appropriate output signals,
and continuous input capability allows the PM5D V2 to be
controlled by external equipment.
GPI
MS Decoding
Built-in MS decoding eliminates the need for external matrix
transformers for MS microphones when working with MSencoded source material.
Mix Minus
M/S DECODE
Mix Minus makes it possible to instantly remove a specified
channel from the mix - a common example from the
broadcast field would be removing an announcer from a
mix. Vertical Pairing In addition to standard odd-even
channel pairing, the PM5D V2 allows “vertical pairing” in
which adjacent channels on different layers can be operated
in tandem - channels 1 and 25, for example.
Word Clock
COMP276
COMP276S
COMP260
COMP260S
REV-X HALL
EQUALIZER601
16
OPENDECK
DE-ESSOR
REV-X ROOM
REV-X PLATE
* Note: The names of programs or menus incorporated in the Add-on Effects are for
descriptive purposes only. Reference to product names, trademarks, artists and songs is
made for the sole purpose of identifying products and sounds studied for modeling and
describing the sound nuances Yamaha attempted to create through use of its
proprietary technology. Such reference does not constitute representations that they
physically possess equal qualities, and does not imply any cooperation or endorsement
by such manufacturers or artists. The products, trademarks are the property of their
respective owners.
The PM5D V2 can be used as either word clock master or
slave to allow effective integration with any type of digital
audio system up to 96-kHz.
MIDI Remote
WORD CLOCK
The PM5D V2 features MIDI IN, OUT and THRU connectors
that can be connected to external MIDI equipment to allow
transmission and reception of MIDI control signals.
17
Complete Sof t ware Control
Optio ns
As with other Yamaha digital consoles, editor application software is provided to PM5D V2 users. The PM5D Editor is designed for
the offline programming and on-line control, with comprehensive analog-style visual representation of the PM5D V2 controls.
A separate DSP5D Editor application is provided for control of the DSP5D. The PM5D Editor will run on Windows XP and Mac OSX
(10.2 or later) compatible computers connected to the PM5D V2 via USB. The DSP5D Editor runs on a Windows computer
connected to the DSP5D via an Ethernet network cable. The PM5D Editor works within the Yamaha Studio Manager Host
environment for smooth integration with other Yamaha digital systems. It would not be possible to introduce all of the PM5D V2
software parameters and displays in the space available here, but here are a few examples.
The PM5D V2’s real I/O versatility comes in the form of four mini-YGDAI expansion slots. The expansion slots are 24 bit/96 kHz
compatible, so you can select mini YGDAI plug-in cards to create the input/output configuration that’s perfect for your needs.
mini-YGDAI Cards
■ Digital I/O Cards
Layer Window
Selected Channel Window
Almost a complete virtual mixer, this window shows all PM5D V2 input channel parameters
“in-line” as they might appear on an analog console. This is a comprehensive overview
designed for fast, efficient editing of the most essential mix elements.
This very useful overview window
shows all parameters available via
the console’s SELECTED CHANNEL
section in easy-to-grasp graphic
form, as well the controls in the
selected channel strip itself, and the
MIX SEND controls.
The PM5D Editor will also include the following windows for total console management :
Master Windows (Mix, Matrix, DCA, Stereo)
These windows provide an informative overview of fader levels as well as other parameters
including EQ, compressor gain reduction, delay, and more.
■ Effect Window
■ Meter Window
■ DCA/Mute Group Window
■ Patch Editor
■ Effect Window
■ Library Window
■ GEQ Window
■ Scene Window
■ Surround Editor Window
■ Setup Window
MY16-AE
MY16-AT
MY16-TD
MY16-CII
MY16-C
16 channel AES/EBU format I/O
16 channel ADAT format I/O
16 channel TDIF format I/O
16 channel CobraNet™ I/O
16 channel CobraNet™ I/O
MY8-AE96
MY8-AE96S
MY8-AE
MY8-AEB
MY8-TD
8 channel AES/EBU format I/O
8 channel AES/EBU format I/O
(w/Sample rate converter)
8 channel AES/EBU format I/O
8 channel AES/EBU format I/O
8 channel TDIF format I/O
■ AD/DA Card
■ AD Cards
MY8-AT
MY8-ADDA96
MY8-AD96
MY8-AD24
MY4-AD
8 channel ADAT format I/O
8 channel Analog I/O
8 channel Anolog Input Card
8 channel Analog Input Card
4 channel Analog Input Card
■ DA Cards
18
■ Third Party Cards
MY8-DA96
MY4-DA
AVIOM 16/o-Y1
AuviTran AVY16-ES
Audio-Service MY16MADI64
8 channel Anolog Output Card
4 channel Anolog Output Card (20bit)
16 channel AVIOM A-Net Output Card
16 channel EtherSound I/O
MADI I/O
PW800W
PSL120
Power Supply
Power Supply Link Cable
19
3. Concerts Using the DSP5D as a Remote I/O
Application Examples
If the console needs to be located a significant distance from the stage you can add
1. Remote Microphone Preamplifier Control
a DCU5D Digital Cabling Unit so that the DSP5D can be located on stage and
Using MY-series expansion cards and the PM5D’s HA REMOTE output, it is possible to receive input from and remotely control up to eight high-performance Yamaha AD8HR
DCU5D is connected to the console via a pair of D-sub 68-pin cascade cables. In
8-channel A/D converter with remote preamp.
addition to the 48 inputs and 24 outputs provided by the PM5D V2 itself, you now
The AD8HR’s mic preamp gain can be remotely controlled in steps of 1dB directly from the PM5D. There’s also a high pass filter and phantom power supply integrated into
have another 48 microphone/line inputs and 24 omni outputs on stage. (Totally 24
each channel that can be turned on and off by remote control. The filter’s cut-off frequency is also remotely adjustable.
Mix Buses, 16 Matrix buses, 48 OMNI outs). Of course, all DSP5D functions can
This Head Amp Remote Control function makes it possible for the AD8HR to be used as a stage box. In addition to the many advantages that this offers, digital connection of
be controlled directly from the PM5D V2 console. You could also add one or two
the AD8HR and PM5D using an AES/EBU cable reduces analog wiring requirements to the bare minimum.
MY-card output interfaces such as the MY8-DA96 to the DSP5D, and use them to
DSP5D
Stage
connected via a “digital snake” consisting of a single CAT5 Ethernet cable. The
CASCADE
drive an on-stage power amp rack for monitors and FOH speakers.
D-sub 68pin (male) Cable
CAT5 Cable
HA Remote
AD8HR
HA Remote
AD8HR
CASCADE
ADE IN
OUT
CASCADE
CASC
ASCADE
ADE IN
OUT
Slot 1
DCU5D
Slot 2
HA Remote
Slot 3
AD8HR
HA Remote
Slot 4
AD8HR
PM5D (RH)
PM5D
2. F.O.H for Concerts
4. Dual DSP5D for Theater and Performance
If the DSP5D will be located near the PM5D V2 at the front-of-house position, you
If you need more on-stage I/O capability for complex staging, for
DCU5D-2
can connect it to the console via a pair of D-sub 68-pin cascade cables. In the
CASCADE
OUT
example, add a second DCU5D and DSP5D as shown in the system below.
Stage
setup shown here, with a single DSP5D cascaded to a PM5D V2, you have 96
The second DCU5D is connected to the first DSP5D via a pair of D-sub
microphone inputs and 48 omni outputs (24 Mix buses, 16 Matrix buses). Other
68-pin cascade cables, and an Ethernet cable connects to the second
peripheral gear such as a playback device for BGM and/or effects can be mounted
DSP5D. In this example each DSP5D drives a power amplifier and FOH
in the same rack as the DSP5D.
speaker - a fast and easy setup for theaters that don’t have a built-in
sound system that will handle the job. Monitors could also be easily
CASCADE
WIRELESS SYSTEM
DSP5D
T5n
Stage
DSP5D
T5n
accommodated if required. Wireless receivers can be connected directly
D-sub 68pin (male) Cable
to the DSP5D units for reliable performer mic pickup. This setup gives
IF2115
IF2115
IS1218
IS1218
you 96 microphone/line inputs and 48 omni outputs (24 Mix buses and
16 Matrix buses) on stage.
D-sub 68pin (male) Cable
CASCADE
CAT5 Cable
XLR Cable
(male)
CASCADE IN
OUT
CASCADE IN
(female)
OUT
Speakon Cable
CASCADE
CASC
ASCADE
ADE IN
OUT
CASCADE
CASC
ASCADE
ADE IN
OUT
DCU5D-1
DSP5D
PM5D (RH)
PM5D (RH)
20
21
PM5D V2, PM5D-RH V2 GENERAL SPECIFICATIONS
5. Opera House with Orchestra Pit and Stage DSP5D Units
D-sub 25pin (male) Cable
In this system, which is designed primarily for an opera-house type situation, one DSP5D unit is located in the orchestra
pit while the second DSP5D unit is located on stage. A DCU5D is connected to the console at the rear of the house via
32-bit (Accumulator 58-bit)
Sampling Frequency
Internal
External
44.1kHz, 48kHz, 88.2kHz, 96kHz
Normal rate: 44.1kHz — 48kHz
Double rate: 88.2kHz — 96kHz
PM5D
Less Than 2.3ms INPUT to STEREO A, B (@ Fs = 48kHz)
Less Than 1.15ms INPUT to STEREO A, B (@ Fs = 96kHz)
Less Than 2.5ms INPUT to STEREO A, B (@ Fs = 48kHz)
Less Than 1.25ms INPUT to STEREO A, B (@ Fs = 96kHz)
Signal Delay
connected to the first DSP5D via a second DCU5D using D-sub 68pin cable and CAT5 cables, as shown in the diagram.
PM5D-RH
CAT5 Cable
This makes 48 microphone/line inputs available in the orchestra pit, and another 48 microphone/line inputs available
on stage. The DSP5D head amps can be controlled directly from the PM5D V2 console. A pair of DME64N units
a back-stage speaker system. The orchestra pit DSP5D directly feeds powered monitors for the musicians in the pit.
Internal Signal Processing
D-sub 68pin (male) Cable
D-sub 68-pin cables. That DCU5D then connects to the first DSP5D unit via a single CAT5 cable. A second DSP5D unit is
connected to the stage DSP5D outputs perform processing and distribution for the FOH speakers, box-seat speakers, and
All faders are nominal when measured. Output impedance of signal generator:150Ω
XLR Cable
(male)
(female)
Accessories
*1 Hum & Noise is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite
dB/octave attenuation.
*2 Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz
3
* Dynamic range is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite
dB/octave attenuation.
*4 Crosstalk is measured with a 30 dB/octave filter @22 kHz
AVIOM A16-II
AVIOM 16/o-Y1
IF2108
Total
Preset 1 + User 500
501
Input Patch Library
Preset 1 + User 99
100
Output Patch Library
Preset 1 + User 99
100
110 typ. DA Converter (STEREO A, B OUT)
(@Sampling frequency = 44.1kHz or 48kHz)
108 typ. AD + DA (to STEREO A, B OUT),
GAIN: Min., PAD: ON (@Sampling frequency = 44.1kHz or 48kHz)
110 typ. DA Converter (STEREO A, B OUT) (@Sampling frequency = 96kHz)
106 typ. AD + DA (to STEREO A, B OUT),
GAIN: Min., PAD: ON (@Sampling frequency= 88.2kHz or 96kHz)
Input Channel Library
Preset 1 + User 199
200
Output Channel Library
Preset 1 + User 199
200
Input EQ Library
Preset 40 + User 159
199
Output EQ Library
Preset 3 + User 196
199
GATE Library
Preset 4 + User 195
199
Hum & Noise*1
Rs = 150 Ω
Input Gain = Max.
Input Pad = 0dB
Input sensitivity = -60dB
-128dBu Equivalent Input Noise (20Hz — 20kHz) STEREO A, B OUT
-86dBu Residual Output Noise, ST Master Off.
COMP Library
Preset 36 + User 163
199
Effect Library
Preset 55 + User 144
199
GEQ Library
Preset 1 + User 199
200
HA Library
Preset 1 + User 199
200
Maximum Voltage Gain
@1kHz
84dB INPUT 1 — 48 to STEREO A, B OUT, Rs = 150 Ω, Input Gain: Max., PAD: Off
84dB INPUT 1 — 48 to MIX OUT/MATRIX OUT/CUE OUT/MONITOR OUT
(via STEREO Bus)
32-bit (Accumulator 58-bit)
Power Requirements
Sampling Frequency
Internal
External
Dimensions
W x D x H (mm)
480 x 355 x 132 (3U)
DC Output
Voltage
24V
Current
23A (Max.)
Less Than 2.5ms INPUT to OMNI OUT (@ Fs = 48kHz)
Less Than 1.25ms INPUT to OMNI OUT (@ Fs = 96kHz)
Total Harmonic Distortion*2
Input Gain = Min.
Frequency Response
IF2108
OUT
CASCADE IN
OUT
IF2108
DCU5D-1
22
1000W (Max.), 100 — 240V, 50/60Hz
Net Weight
10kg
Less Than 0.05% 20Hz - 20kHz @+4dBu into 600Ω
INPUT 1 — 48ch to OMNI OUT 1-24ch
(@ Sampling frequency = 44.1kHz or 48kHz)
Less Than 0.05% 20Hz - 20kHz @+4dBu into 600 Ω
INPUT 1 — 48ch to OMNI OUT
(@Sampling frequency = 96kHz)
Operation Temperature Range
10 — 35°C
Storage Temperature Range
-20 — 60°C
1.0, -3.0dB 20Hz — 20kHz @1kHz into 600 Ω
INPUT 1 — 48ch to OMNI OUT
(@ Sampling frequency = 44.1kHz or 48kHz)
1.0, -3.0dB 20Hz — 40kHz @1kHz into 600 Ω
INPUT 1 — 48ch to OMNI OUT
(@ Sampling frequency = 96kHz)
Output Terminal
110 typ. DA Converter (OMNI OUT)
(@ Sampling frequency = 44.1kHz or 48kHz)
108 typ. AD + DA (to OMNI OUT)
GAIN; Min., PAD: ON (@ Sampling frequency = 44.1kHz or 48kHz)
110 typ. DA Converter (OMNI OUT)
(@ Sampling frequency = 96kHz)
106 typ. AD + DA (to OMNI OUT)
GAIN; Min., PAD: ON (@ Sampling frequency = 96kHz)
DCU5D GENERAL SPECIFICATIONS
PW800W OUTPUT SPECIFICATIONS
DC OUTPUT
Format
Level
Connector
—
DC 24V
JL05-2A22-14PC 24pin (Male)
Sampling Frequency
Nomal rate; 44.1kHz - 48kHz
Double rate; 88.2kHz - 96kHz
Power Requirements
12W, 100-240V 50/60Hz
DC IN; XLR-4-32 type (4pin=+12V, 1pin=GND), 11.4V-15V, 1.5A
Hum & Noise*1
Rs=150Ω, Input Gain = Max.
-128dBu Equivalent Input Noise (20Hz - 20kHz)
-86dBu Residual Output Noise, OMNI OUT
Dimensions W x D x H (mm)
480 x 150 x 44
Net Weight
2.3kg
Crosstalk @1kHz
-100dB*4, -80dB adjacent input channels
-100dB*4, -80dB input to output
Operation free-air Temperature Range
10 — 35°C
Storage Temperature Range
-20 — 60°C
Power Requirements
300W, AC 100 — 240V 50/60Hz
Dimensions W x D x H (mm)
480 x 460 x 440 (11U) + 13 (leg)
Net Weight
38kg
Operation free-air Temperature Range
10 — 35˚C
Storage Temperature Range
-20 — 60˚C
Accessories
PM5D (RH)
44.1kHz, 48kHz, 88.2kHz, 96kHz
Normal rate: 44.1kHz — 48kHz
Double rate: 88.2kHz — 96kHz
Signal Delay
CASCADE
CASCADE IN
PW800W GENERAL SPECIFICATIONS
Internar Signal Processing
Dynamic Range*3
IF2108
LIBRARIES
Number
DSP5D GENERAL SPECIFICATIONS
DSP5D-1
IF2108
1.0, -3.0dB 20Hz — 20kHz @1kHz into 600 Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 44.1kHz or 48kHz)
1.0, -3.0dB 20Hz — 40kHz @1kHz into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 88.2kHz or 96kHz)
Scene Memory
AVIOM A16-II
IF2108
PM5D-RH
Goothneck Lamp x 3, Power Supply cable (3.6m), Cover
DSP5D-2
DCU5D-2
AVIOM A16-II
0.5, -1.5dB 20Hz — 20kHz @1kHz into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 44.1kHz or 48kHz)
0.5, -2d B 20H z — 40kH z @1kH z in to 600 Ω
INPUT 1 — 48ch to STEREO A,B OUT
(@Sampling frequency = 88.2kHz or 96kHz)
-20 — 60˚C
Name
Ochestra Pit
HEADPHONE
PM5D
T5n
IS1218
HEADPHONE
10 — 35˚C
Less Than 0.05% 20Hz — 20kHz @+4dBu into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT (@Sampling frequency = 44.1kHz or 48kHz)
Less Than 0.05 % 20Hz — 40kHz @+4dBu into 600Ω
INPUT 1 — 48ch to STEREO A,B OUT (@Sampling frequency = 88.2 kHz or 96kHz)
DME64N
HEADPHONE
PM5D: 98kg, PM5D-RH: 97kg
Operation free-air Temperature Range
+10 — -138, - ∞ dB All Faders
MY8-DA96
IS1218
1551 x 950 x 283
Net Weight
Total Harmonic Distortion*2
Dynamic Range*3
(Max. level to noise level)
IF2115
Dimensions W x D x H (mm)
480W DC 24V 20A (Use PW800W Only)
528W DC 24V 22A (Use PW800W Only)
Fader Resolution
AMP Rack
Stage
PM5D
PM5D-RH
Storage Temperature Range
Frequency Response
IF2115
Power Requirements
Moterized, Stroke: 100mm All Faders
Input Gain = Min.
Dressing Room
-100dB*4, -80dB adjacent input channels
-100dB*4, -80dB input to output
Fader
Speakon Cable
T5n
Crosstalk
@1kHz
D-sub 68pin cable 10m x 2
*1 Hum & Noise is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite
dB/octave attenuation.
*2 Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz
*3 Dynamic range is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite
dB/octave attenuation.
*4 Crosstalk is measured with a 30 dB/octave filter @22 kHz
23
PM5D V2/PM5D-RH V2 SLOT (1-4) CHARACTERISTICS
PM5D V2 ANALOG INPUT CHARACTERISTICS
GAIN SW *4
26
STEREO INPUT 1 – 4 [L, R]
3kΩ
-16dB
-34dB
50-600Ω Mics & 600Ω Lines
—
Sensitivity *1
-80dBu (0.0775mV)
Input Level
Nominal
-60dBu (0.775mV)
-36dBu (12.3mV)
-16dBu (123mV)
+4dBu (1.23V)
-10dBu (245mV)
+10dBu (2.45V)
+30dBu (24.51V)
-54dBu (1.55mV)
-34dBu (15.5mV)
-14dBu (155mV)
-10dBu (245mV)
+10dBu (2.54V)
+30dBu (24.51V)
4kΩ
600Ω Lines
—
INSERT IN 1 – 48
10kΩ
600Ω Lines
—
-16dBu (123mV)
+4dBu (1.23V)
+24dBu (12.28V)
2TR IN ANALOG 1, 2 [L, R]
10kΩ
600Ω Lines
+24dB (default)
-6dBu (388mV)
+4dBu (1.23V)
+24dBu (12.28V)
+18dB
-12dBu (195mV)
-2dBu (0.616V)
+18dBu (6.16V)
TALKBACK
3kΩ
50-600Ω Mics & 600Ω Lines
—
-60dBu (0.775mV)
-50dBu (2.45mV)
-30dBu (24.5mV)
10dB
Connector
Max. Before Clip
-40dBu (7.75mV)
Card Name
XLR-3-31 Type (Balanced) *2
XLR-3-31 Type (Balanced)
*2
Phone Jack (TRS) (Balanced) *3
XLR-3-31 Type (Balanced) *2
Actual Load
Impedance
GAIN
-62dB
INPUT 1 – 48
3kΩ
+10dB
-62dB
STEREO INPUT 1 – [L, R]
3kΩ
+10dB
For Use With Nominal
50-600Ω Mics & 600Ω Lines
50-600Ω Mics & 600Ω Lines
2TR IN ANALOG 1, 2 [L, R]
10kΩ
600Ω Lines
TALKBACK
3kΩ
50-600Ω Mics & 600Ω Lines
GAIN SW *4
—
—
Sensitivity *1
-82dBu (61.6µV)
Input Level
Nominal
-62dBu (0.616mV)
Max. Before Clip
-42dBu (6.16mV)
-10dBu (245mV)
+10dBu (2.45V)
+30dBu (24.5V)
-82dBu (61.6µV)
-62dBu (0.616mV)
-42dBu (6.16mV)
-10dBu (245mV)
+10dBu (2.45V)
+30dBu (24.5V)
+24dB (default)
-6dBu (388mV)
+4dBu (1.23V)
+24dBu (12.28V)
+18dB
-12dBu (195mV)
-2dBu (0.616V)
+18dBu (6.16V)
—
-60dBu (0.775mV)
-50dBu (2.45mV)
-30dBu (24.5mV)
Connector
XLR-3-31 Type (Balanced) *2
XLR-3-31 Type (Balanced) *2
GAIN SW *4
Output Level
+24dB (default)
Nominal
+4dBu (1.23 V)
Max. Before Clip
+24dBu (12.28 V)
+18dB
-2dBu (616mV)
+18dBu (6.16V)
+24dB (default)
+4dBu (1.23 V)
+24dBu (12.28 V)
+18dB
-2dBu (616mV)
+18dBu (6.16V)
+24dB (default)
+4dBu (1.23 V)
+24dBu (12.28 V)
XLR-3-32 Type (Balanced) *1
150Ω
600Ω Lines
CUE OUT [L, R]
150Ω
600Ω Lines
+18dB
-2dBu (616mV)
+18dBu (6.16V)
MATRIX OUT 1 – 8
150Ω
600Ω Lines
+24dB (default)
+4dBu (1.23 V)
+24dBu (12.28 V)
+18dB
-2dBu (616mV)
+18dBu (6.16V)
MIX OUT 1 – 24
150Ω
600Ω Lines
+24dB (default)
+4dBu (1.23 V)
+24dBu (12.28 V)
+18dB
-2dBu (616mV)
+18dBu (6.16V)
INSERT OUT 1 – 48
150Ω
10kΩ Lines
—
+4dBu (1.23 V)
+24dBu (12.28 V)
PHONES (x2)
15Ω
8Ω Phones
—
75mW *6
150mW
Stereo Phone Jack (TRS)
40Ω Phones
—
65mW *6
150mW
(Unbalanced) *3
ANALOG IN
4 IN
—
4
MY8-AT
ADAT
8 IN
8 OUT
4
8 IN
—
4
MY8-TD
TASCAM
8 IN
8 OUT
4
MY8-AD96
ANALOG IN
8 IN
—
4
MY8-AE
AES/EBU
8 IN
8 OUT
4
MY4-DA
ANALOG OUT
—
4 OUT
4
MY16-AT
ADAT
16 IN
16 OUT
4
MY8-DA96
ANALOG OUT
—
8 OUT
4
MY16-TD
TASCAM
16 IN
16 OUT
4
MY8-AE96
AES/EBU
8 IN
8 OUT
4
MY16-AE
AES/EBU
16 IN
16 OUT
4
MY8-AE96S
AES/EBU
8 IN
8 OUT
4
MY16-CII*
CobraNet
16 IN
16 OUT
4
GAIN
XLR-3-32 Type (Balanced) *1
XLR-3-32 Type (Balanced) *1
XLR-3-32 Type (Balanced) *1
XLR-3-32 Type (Balanced) *1
Phone Jack (TRS) (Balanced) *2 *5
-62dB
+10dB
3kΩ
ST IN 1 – 4 [L, R]
-62dB
+10dB
3kΩ
Actual Source Impedance
*1. XLR-3-32 type connectors are
balanced. (1 = GND, 2 = HOT,
3 = COLD)
*2. Phone jack are balanced.
(Tip = HOT, Ring = COLD,
Sleeve = GND)
*3. PHONES stereo phone jack is
unbalanced. (Tip = LEFT,
Ring = RIGHT, Sleeve = GND)
*4. There are switches inside the
body to preset the maximum
output level.
*5. INSERT OUTs are only provided
for PM5D.
*6. The position of the level control is
10dB lowered from Max.
• In these specifications,
0dBu = 0.775 Vrms.
• All output DA converters are 24bit,
128times (@48kHz) oversampling.
AES/EBU
Professional Use
24bit *1
RS422
3 COAXIAL
IEC-60958
Consumer Use
24bit *1
0.5Vpp/75Ω
—
—
RS422
CASCADE OUT
XLR-3-31 Type
(Balanced) *2
XLR-3-31 Type
(Balanced) *2
OUT
MIDI
—
DIN-5pin
THRU
MIDI
—
DIN-5pin
TIME CODE IN
SMPTE
SMPTE
0.3Vpp (min.)/10Vpp (max.), 10kΩ
XLR-3-31 type
WORD CLOCK
IN
—
TTL/75Ω (ON/OFF)
BNC
OUT
—
TTL/75Ω
BNC
GPI
—
—
D-sub 25pin (female)
HA REMOTE
—
RS422
D-sub 9pin (male)
REMOTE
—
RS422
D-sub 9pin (female)
KEYBOARD
PS/2
—
DIN 6pin
MOUSE
]
PS/2
—
DIN 6pin
LAMP 1,2,3
—
2.5V-11.5V
XLR-4-31 type
MEMORY CARD
—
—
PCMCIA (CF)
XLR-3-32 Type (Balanced) *1
Connector
D Sub Half Pitch Connector 68P (Female)
Ether Con
• CASCADE cable max. 200m@48KHz, 50m@96KHz.
Unit: mm
865
XLR-3-32 Type (Balanced) *2
2 AES/EBU
DIN-5pin
+18dBu
100 Base-TX (RJ-45)
0.5Vpp/75Ω
—
-2dBu
• CASCADE cable max. 200m@48KHz, 50m@96KHz.
24bit
MIDI
+18dB
—
100 Base-TX (RJ-45)
IEC-60958
*3
Connector
Connector
—
—
MIDI
IN
+24dBu
CASCADE OUT
—
XLR-3-31 Type (Balanced) *1
B type USB Connector
+4dBu
Ether Con
CASCADE IN
RS422
Connector
—
Max. Before Clip
+24dB (default)
Level
24bit
Level
Nominal
RS422
AES/EBU
Format
Output Level
GAIN SW*2
—
PM5D V2
XLR-3-32 Type (Balanced) *2
+30dBu
Data Length
TO HOST
Connector
-42dBu
+10dBu
—
Terminal
Level
-62dBu
-10dBu
Format
RS422
Connector
RS422
-82dBu
600Ω Lines
CASCADE OUT
—
XLR-3-31 Type (Balanced) *1
24bit *1
50-600Ω Mics. &
Terminal
—
Level
Data Length
+30dBu
D Sub Half Pitch Connector 68P (Female)
CASCADE IN
RS422
Format
+10dBu
DSP5D DIGITAL OUTPUT CHARACTERISTICS
Level
24bit
2TR OUT
AES/EBU
1 AES/EBU
DIGITAL
Professional Use
-10dBu
Connector
Data Length
Data Length
USB1.1
600Ω Lines
Format
Format
Terminal
600Ω Lines
Terminal
AES/EBU
PM5D V2/PM5D-RH V2 DIGITAL OUTPUT CHARACTERISTICS
Max. Before Clip
-42dBu
DSP5D DIGITAL INPUT CHARACTERISTICS
2TR IN 1 AES/EBU
DIGITAL 2 AES/EBU
*2
D-Sub Half Pitch Connector 68P (Female)
Output Level
Nominal
-62dBu
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2. There are switches inside the body to preset the maximum output level.
• All output DA converters are 24bit, 128times (@48kHz) oversampling.
Terminal
USB
For Use With Nominal
150Ω
Dimensions
RS422
50-600Ω Mics. &
Sensitivity*1
-82dBu
For Use With Nominal
DSP5D ANALOG OUTPUT CHARACTERISTICS
PM5D V2/PM5D-RH V2 CONTROL INPUT/OUTPUT CHARACTERISTICS
RCA Pin Jack
Actual Load Impedance
INPUT 1 – 48
PM5D V2/PM5D-RH V2 DIGITAL INPUT CHARACTERISTICS
*1. XLR-3-31 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
*2. With Sampling Rate Converter.
PM5D-RH V2
Unit: mm
283
283
271
271
260
260
RCA Pin Jack
D-Sub Half Pitch Connector 68P (Female)
*1. Dither :word length 16/20/24 bit
*2. XLR-3-32 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
*3. With Sampling Rate Converter.
24
Connector
MONITOR OUT [L, R, C]
—
The Number Of
Usable Cards
ANALOG IN
OMNI OUT – 24
600Ω Lines
—
Output
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (all faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
• All input AD converters are 24bit linear, 128times (@48kHz) oversampling.
• +48V DC (phantom power) is supplied to INPUT (1 – 48) XLR type connectors via one master software controled switch and each individual software controled switches.
• There are switches inside the body to preset the maximum input level.
XLR-3-31 Type (Balanced) *2
150Ω
CASCADE IN
Input
MY4-AD
Input Terminals
XLR-3-31 Type (Balanced) *2
STEREO A, B [L, R]
3 COAXIAL
Function
DSP5D ANALOG INPUT CHARACTERISTICS
PM5D V2/PM5D-RH V2 ANALOG OUTPUT CHARACTERISTICS
For Use With Nominal
Card Name
MY8-AD24
Output Terminals
Actual Source
Impedance
The Number Of
Usable Cards
Output
*Only SLOT1 has a Serial Interface.
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced. (1 = GND, 2 = HOT, 3 = COLD)
*3. Phone jacks are balanced. (Tip = HOT, Ring = COLD, Sleeve = GND)
*4. There are switches inside the body to preset the maximum input level.
• In these specifications, 0dBu = 0.775 V rms.
• All input AD converters are 24bit linear, 128times (@48kHz) oversampling.
• +48V DC (phantom power) is supplied to INPUT (1 – 48) XLR type connectors via each individual switch.
Output Terminals
Input
XLR-3-31 Type (Balanced) *2
PM5D-RH V2 ANALOG INPUT CHARACTERISTICS
Input Terminals
Function
950
For Use With Nominal
-60dB
0
INPUT 1 – 48
Actual Load
Impedance
GAIN
865
PAD
950
Input Terminals
Each I/O SLOT accepts a Digital Interface card.
1450
1450
1551
1551
Specifications and appearance are subject to change without notice.
All trademarks and registered trademarks are property of their respective owners.
25
Sys te m Leve l D i a g ra m
B l o c k D i a g ra m
PM5D(NotRecallable HA)
OFF
0
26
INSERT OUT
+10
+4
0
0
-10
-20
-30
-10
-40
-20
-50
-30
-60
-40
-70
-50
-80
-60
-90
-70
-80
-100
-110
-90
-120
-100
-130
-110
-140
-120
-150
-130
-160
-140
-170
-150
-180
-160
-190
-170
-200
-180
-210
-190
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1 Max. Input [+30dBu]
INSERT IN
IN
IN
IN
IN
IN
IN
IN
IN
Digital Clipping Level
Max. Output
[+24dBu]
2 Max. Input [+24dBu]
CASCADE OUT
CASCADE IN
1 Nominal
Input [+10dBu]
OUT
OUT
OUT
OUT
OUT
OUT
+30
+24
+20
2 Nominal [+4dBu]
Input
PHONES
Max Output
(150mW@8Ω)
3 Max. Input [-14dBu]
Nominal Output
(75mW@8Ω)
[The position of the level
control is 10dB lowered
from Max]
5 Max. Input [-30dBu]
3 Nominal Input [-34dBu]
4 Max. Input [-40dBu]
ATT
OUT
OUT
METER METER
GR
GR
INSERT
METER METER
INSERT
4BAND
EQ
HPF
INPUT 1-48
GATE
SIGNAL
AD
ST IN L
INSERT IN
ST IN 1-4 L
ON
KEYIN
METER
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
CH1-8 Post EQ/
CH9-16 Post EQ/
...
CH41-48 Post EQ
LINK ON/OFF
INSERT
FIXED MIX PAN
POST
TO ST
FOLLOW
PAN
MIX1
PreEQ/
PreFader/
PostON
-10
+48V MASTER
PreEQ/
PostEQ/
PreDelay/
PostFader
x4
[ST IN]
(1-4)
-30
OFF
FX RTN 1-4
ON
PreGate PreATT
Pair configuration of Mono channel
PEAK
default setting
4 Nominal Input [-60dBu]
INSERT OUT 1-48
1 INPUT 1-48 (GAIN MIN.,PAD ON)
ST IN (GAIN MIN.)
To
SLOT1
-70
SLOT2
SLOT3
SLOT4
-90
SLOT3 1-16
16
SLOT4 1-16
FOLLOW
PAN
MIX1
Pre EQ/
PreFader/
PostON
16
TO
External
CUE
SELECT
30
METER
-110
MIX 1~24
INSERT OUT
VARI
LEVEL
OSC(L)
OSC(R)
Pink Noise
Burst Noise
FX4 OUT L/R
FX5 OUT L/R
ON
FX7 OUT L/R
FX8 IN L/R
Lch
METER
AES/EBU
2TR IN DIGITAL 3
COAXIAL
Same as the matrix master 1
USE IN (1-48)
AS TALKBACK
METER
LEVEL
IN 1-48
SRC
2TR IN D2 L/R
SRC
2TR IN D3 L/R
ON
CUER
From CASCADE IN SELECT
TALKBACK
SELECT
AD
2TR IN A1 L/R
31BAND
GEQ
INSERT OUT
R
INSERT IN
12
L
-180
AD
2TR IN DIGITAL 5
SELECT
SPECTRUM
ANALYZER
STEREO A
STEREO B
MIX1-24
MATRIX1-8
DIRECT OUT 1-STIN-4R
INSERT OUT
OSC OUT(Lch)
TB OUT
MONITOR L,R,C
2TR IN A2 L/R
R
10
INPUT PATCH
-190
To MONITOR SELECT
L
CUE OUT
R
DA
PHONES
LEVEL
OUT ATT.
DA
CUE/SOLO LOGIC
DA
PHONES
DA
OUTPUT PATCH
1
CUE OUT
LEVEL
DA
ON
MONITOR
SELECT
CASCADE
OUT
ON/OFF
METER
From 2TR IN DIGITAL1-3,
ANALOG1-2
OUT ATT.
2
SLOT1 1 6
DITHER
2
SLOT2 1 6
SLOT1
DITHER
24
SLOT3 1 6
SLOT4 1 6
MIX1-24
MATRIX1-8
SLOT2
DITHER
8
SLOT3
DITHER
56
DA
INSERT
MONITOR
LEVEL
2
STEREO A
STEREO B
2TR IN D1
2TR IN D2
2TR IN D3
2TR IN A1
2TR IN A2
L
2TR IN DIGITAL 4
-170
CUE OUT
DELAY
INPUT/
OUTPUT/
DCA
TRIM
30
32
CASCADE OUT
METER
CUE OUT
DELAY
30
DIGITAL
CUE
LEVEL
METER
BYPASS
CUE L
BI DIRECTION
CASCADE
IN
ON/OFF
To OUTPUT PATCH
GEQ 1(...12)
-160
Max. DSP Noise Floor
METER
From
CASCADE IN
SELECT
SLOT1-4(1-16)
TB OUT
8
To OUTPUT
PATCH
External CUE
SELECT
ON
AD
TALKBACK
2TR IN D1 L/R
DA
OSC OUT To OUTPUT PATCH
FX8 OUT L/R
SRC
2
To OUTPUT PATCH
OUT ATT.
ON
Rch
METER
2
2TR IN DIGITAL 2
[MATRIX OUT]
(1~8)
INSERT OUT
PreEQ/
PostEQ/
PreFader/
PostOn
PFL/
PostON
Same as the above
METER
AES/EBU
1
DA
To OUTPUT PATCH
STEREO B-L
STEREO B-R
OFF
FX6 OUT L/R
FX7 IN L/R
2
OUTPUT
DELAY
HPF LPF
+48V
FX6 IN L/R
-140
PostDelay
OUT ATT.
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
Stereo A,B,Matrix1-8 Post EQ
LINK ON/OFF
MIX24
Same as the above
FX3 OUT L/R
EFFECT
1-8
FX5 IN L/R
ON
PostON
INSERT
COMP
STEREO A-R
MIX PAIR
FX2 OUT L/R
FX4 IN L/R
-130
-150
4BAND
EQ
METER
PostFader
MIX1
MIX24
FX1 OUT L/R
FX3 IN L/R
2TR IN DIGITAL 1
MIX 24
To OUTPUT PATCH
PreFader PreEQ
KEYIN METER
IN
OUT
OUT
METER METER
METER
GR
INSERT METER INSERT LEVEL/
DCA7-8
To METER
CUE
24
95
To OUTPUT PATCH
IN
METER
INSERT
EFFECT
FX2 IN L/R
-120
PreEQ/
PostEQ/
PreFader/
PostOn
PFL/
PostON
STEREO A-L
FX1 IN L/R
5 TALKBACK
LEVEL69
ON
FIX
MIX2
To BUS SUMMING
4 INPUT 1-48 (GAIN MAX.,PAD OFF)
To OUTPUT PATCH
PreON/
PostON
Same as the mix master 1
TO ST
LCR
16
16
MIX 1
ON
PreFader/
PostFader/
PostON
CUE
FIXED MIX PAN
POST
TO ST
SLOT2 1-16
16
PostDelay
OUTPUT
DELAY
INSERT OUT
CUE
ON
CSR
PAN
4BAND
EQ
ATT HPF
16
32
-100
PFL/
AFL/
POST PAN
SLOT1 1-16
16
CASCASE IN
3 ST IN (GAIN MAX.)
ON
LEVEL/
DCA1-8
CASCADE IN SELECT
16
[STEREO A]
R
OUT
METER
IN
METER
GAIN
-60
-80
2 INSERT IN 1-48
2TR IN ANALOG 1,2 [L,R] (default setting)
PreAT
T
METER
ST IN 1-4 R
L
OUT ATT.
PostON
ON
MIX to STEREO
METER
PreFader
PostFader
PostON
SIGNAL
AD
ST IN R
DA
[STEREO A]
METER
PostFader
INSERT
PAN
LCR
LEVEL/
DCA7-8
INSERT
COMP
to MATRIX
ON
CSR
INSERT METER
8BAND
EQ
ON
ST IN 1-4 L
OFF
-50
GR
To METER
BI DIRECTION
Same as the above
SIGNAL
R
KEYIN METER Keyin
To OUTPUT PATCH
Self Pre EQ/Self Post EQ/Mix21-24 OUT/
OUT
IN
To MONITOR SELECT
OUT
Mix1-12 Post EQ/Mix13-24 Post EQ
METER METER
PreFaderPreEQ
METER LINK ON/OFF
IN
METER
INSERT
GAIN
STEREO A,B[L,R]
MONITOR OUT[L,R,C]
CUE OUT[L,R]
MATRIX OUT1-8
MIX OUT1-24
DIRECT OUT
ON
GAIN
DA
DA
To OUTPUT PATCH
KEYIN CUE
ON
5 Nominal Input [-50dBu]
ON
Same as the monaural input
AD
-40
Same as the stereo master A
PostON
PreFader
PreEQ
PreHPF
PreATT
INPUT 1-48
ON
L
To OUTPUT PATCH
To MONITOR SELECT
PEAK
ST IN L
DA
To OUTPUT PATCH
To MONITOR SELECT
Same as the stereo master L
Pair configuration of Mono channel
SIGNAL
AD
ON
PostDelay
OUT ATT.
OUTPUT
DELAY
PFL/
PostON
ON
VARI
ST IN 1-4
+48V
ON
INSERT
PreFader/
PostFader/
PostON
MIX24
To OUTPUT PATCH
PEAK
OFF
INPUT
ON
COMP
to MATRIX
CUE
ON
LEVEL/
DCA7-8BAL
PostON
OUT ATT.
TO TALKBACK
ON
-20
8BAND
EQ
To OUTPUT PATCH
METER
PostFader
MIX PAIR
INSERT OUT
x 48 OFF ON
[INPUT]
(1-48)
INSERT OUT
PreEQ/
PostEQ/
PreFader/
PostOn
PreFader PreEQ
ST IN 1-4 R
TO TALKBACK SELECT
+48V
To METER
ON
BI DIRECTION
FIX
METER
OUT
IN
OUT
METER METER
METER
GR
INSERT METER
INSERT
IN
METER
From
CASCADE IN
SELECT
LCR
MIX2
AD
PM5D RH(Recallable HA)
TO ST
PAN
SIGNAL
GAIN
ST IN R
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
Stereo A,B,Matrix1-8 Post EQ
LINK ON/OFF
KEYIN
ON
CSR
PEAK
+10
+4
0
STB
(C) CUE
CUE
INSERT
LEVEL/
DCA1-8
INPUT
DELAY
COMP
METER
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
Keyin Filter
CH1-8 Post EQ/
CH9-16 Post EQ/
...
CH41-48 Post EQ
LINK ON/OFF
InsertIn
METER
PEAK
GAIN
OUT
Nominal Output
[+4dBu]
OUT
METER
IN
METER
INSERT
ON
x4
STA
MIX1-24
PFL/
AFL/
Post PAN
PostON
KEYIN
AD
INSERT IN
[ST IN]
(1-4)
SELECT
+30
+24
+20
METER
PostFader
To METER
MSDECODE
TO TALKBACK SELECT
INSERT
OFF
PreFader
IN
METER
PreAT
T
METER
To
METER
PAD
INPUT
dBu
CH 1(...48)
SIGNAL
GAIN
MONO
Bit
PreATT
PreGate
PEAK
+48V
ON
DIM
x 48
[INPUT]
(1-48)
Analog
MONITOR
DELAY
2
2
2
MONITOR
DELAY
2
2
L
DA
R
DA
C
24
2
METER
8
METER
DEFINE
SLOT4
MONITOR OUT
INSERT
MONITOR
DELAY
2
DA
INSERT
DIM
AD
Analog
BUS
EQ
MASTER
DCA MASTER
OUTPUT
PAN
INSERT
INSERT COMP INSERT
BAL
INSERT DELAY
DA
Adder
(x8/4)
LEVEL
(x2)
ON
PATCH
MONO
GAIN
DCA
MSEQ
INSERT ON
PHASE ATT.
HPF INSERT
INSERT GATE COMP INSERT DELAY LEVEL
DECDE
(x4)
(x8)
MONO
dBFS
PAD
INPUT
PATCH
MATRIX1
MATRIX2
MATRIX3
MATRIX4
MATRIX5
MATRIX6
MATRIX7
MATRIX8
dBu
Digital
Digital
Digital
Analog
Analog
DIGITAL
MONITOR
LEVEL
To OUTPUT PATCH
ON
OUT ATT.
METER
95
DITHER
SRC
2
1
2TR OUT DIGITAL 1
AES/EBU
1
DITHER
SRC
DITHER
SRC
2
3
2TR OUT DIGITAL 2
AES/EBU
2TR OUT DIGITAL 3
2
COAXIAL
STEREO A
STEREO B
MIX1-24
MATRIX1-8
[0dBu = 0.775Vrms]
[0dBFS = Full Scale]
PM5D V2 / PM5D-RH V2
INPUT
PATCH
PHASE ATT.
Analog
IN
METER
PreATT
METER
dBu
Bit
-10
+10
+4
0
-20
-10
-40
-30
-20
-50
-30
-60
-40
-70
-50
-80
-60
-70
-90
-100
-80
-110
-90
-120
-100
-130
-110
-140
-120
-150
-130
-140
-160
-170
-150
-180
-160
-190
-170
-200
-180
-190
-210
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1 Max. Input [+30dBu]
INSERT IN
IN
IN
IN
IN
IN
IN
IN
Digital Clipping Level
IN
Max. Output
[+24dBu]
CASCADE OUT
2 Max. Input [+24dBu]
CASCADE IN
1 Nominal
Input [+10dBu]
OUT
OUT
OUT
OUT
MSDECODE
OUT
OUT
OUT
METER METER
GR
INSERT
INSERT GR
METER METER
ATT
4BAND
EQ
HPF
GATE
METER
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
Keyin Filter
CH1-8 Post EQ/
CH9-16 Post EQ/
...
CH41-48 Post EQ
LINK ON/OFF
InsertIn
METER
OUT
Nominal Output
[+4dBu]
2 Nominal [+4dBu]
Input
PHONES
Max Output
(150mW@8Ω)
4 Max. Input [-30dBu]
3 Max. Input [-42dBu]
+10
+4
0
-20
[The position of the level
control is 10dB lowered
from Max]
-30
KEYIN
METER
LEVEL/
DCA1-8
STEREO A,B[L,R]
MONITOR OUT[L,R,C]
CUE OUT[L,R]
MATRIX OUT1-8
MIX OUT1-24
ON
ON
CSR
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
Stereo A,B,Matrix1-8 Post EQ
LINK ON/OFF
TO ST
PAN
From
CASCADE IN
SELECT
LCR
FOLLOW
PAN
MIX1
PreEQ/
PreFader/
PostON
FIX
MIX2
ON
BI DIRECTION
+48V
[INPUT]
(1-48)
TO TALKBACK SELECT
PostON
PreFader
PreEQ
PreHPF
PreATT
OFF
PostDelay
OUTPUT
DELAY
AD
x4
OFF
ON
PFL/
PostON
STEREO A-R
STEREO B-L
ON
STEREO B-R
To OUTPUT PATCH
KEYIN METER Keyin
To OUTPUT PATCH
Self Pre EQ/Self Post EQ/Mix21-24 OUT/
OUT
IN
OUT
Mix1-12 Post EQ/Mix13-24 Post EQ
METER METER
METER LINK ON/OFF
PreFader PreEQ
GR
METER
LEVEL/ PostFader
INSERT
INSERT METER
INSERT
To METER
PostON
IN
METER
BI DIRECTION
Same as the above
AD
ST IN 1-4 L
AD
ST IN 1-4 R
FX RTN 1-4
Pair configuration of Mono channel
PreFader
IN
METER
GAIN
16
SLOT1 1-16
LEVEL/D
CA1-8
ATT HPF
PFL/
AFL/
POST PAN
ON
CSR
PAN
4BAND
EQ
16
16
32
ON
FOLLOW
PAN
MIX1
Pre EQ/
PreFader/
PostON
SLOT3 1-16
LEVEL
MIX2
SLOT4 1-16
16
32
32
From CASCADE OUT
4BAND
EQ
MIX24
VARI
-110
-130
FX3 IN L/R
FX5 IN L/R
FX6 IN L/R
FX7 IN L/R
-140
FX8 IN L/R
OSC(L)
OSC(R)
Pink Noise
Burst Noise
FX3 OUT L/R
FX4 IN L/R
EFFECT
1-8
PostDelay
OUTPUT
DELAY
MATRIX 1
To OUTPUT PATCH
INSERT OUT
PreEQ/
PostEQ/
PreFader/
PostOn
PFL/
PostON
To OUTPUT PATCH
CUE
FX2 OUT L/R
24
92
PostON
INSERT
COMP
STEREO B-R
Same as the above
FX1 OUT L/R
FX2 IN L/R
MIX 1~24
INSERT OUT
METER
PostFader
STEREO B-L
MIX24
CUE SELECT
To OUTPUT PATCH
PreFader PreEQ
LEVEL/
DCA7-8 ON
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
Stereo A,B,Matrix1-8 PostEQ
LINK ON/OFF
STEREO A-R
MIX PAIR
EFFECT
FX1 IN L/R
To OUTPUT PATCH
MIX 24
KEYIN METER
IN
OUT
OUT
METER METER
METER
GR
INSERT To METER INSERT METER INSERT
IN
METER
To BUS SUMMING
METER
PreEQ/
PostEQ/
PreFader/
PostOn
MIX1
ON
FIX
To External
-120
INSERT OUT
STEREO A-L
16
16
32
CASCADE IN D-SUB
PreON/
PostON
Same as the mix master 1
TO ST
FIXED MIX PAN
POST
TO ST
SLOT2 1-16
CASCADE IN SELECT
16
MIX 1
To OUTPUT PATCH
PFL/
PostON
CUE
CUE
LCR
16
SLOT2
PAN
PostDelay
OUTPUT
DELAY
OUT
METER
To METER
SLOT1
-100
INSERT
ON
PreFader/
PostFader/
PostON
MIX to STEREO
METER
PostFader
PostON
PreATT
METER
ON
COMP
to MATRIX
LCR
PreGate PreATT
ON
ST IN R
CASCADE IN RJ-45
8BAND
EQ
ON
CSR
ON
ST IN L
-70
DCA7-8
ON
INPUT 1-48
GAIN
ON
STEREO A-L
To OUTPUT PATCH
Same as the stereo master L
KEYIN CUE
CASCADE OUT RJ-45
4 TALKBACK
PostON
INSERT
PreFader/
PostFader/
PostON
To OUTPUT PATCH
ST IN 1-4
Pair configuration of Mono channel
+48V
ON
INPUT
[ST IN]
(1-4)
32
3 INPUT 1-48 (GAIN MAX.)
ST IN (GAIN MAX.)
ON
COMP
to MATRIX
VARI
DIRECT OUT
+48V MASTER
-60
-90
LEVEL/
DCA7-8BAL
To OUTPUT PATCH
PreEQ
METER
PostFader
Same as the stereo master A
To OUTPUT PATCH
TOTALKBACK
x 48 OFF
ON
-50
-80
INSERT OUT
PreEQ/
PostEQ/
PreFader/
PostOn
PreFader
MIX PAIR
-40
2 2TR IN ANALOG 1,2 [L,R] (default setting)
8BAND
EQ
CUE
ON
Same as the monaural input
1 INPUT 1-48 (GAIN MIN.)
ST IN (GAIN MIN.)
KEYIN
METER
OUT
IN
OUT
METER METER
METER
GR
INSERT
INSERT METER
INSERT
To METER
IN
METER
MIX24
GAIN
PM5D-RH V2 / DSP5D
ST B
(C) CUE
CUE
FIXED MIX PAN
POST
TO ST
Keyin
Self Pre EQ/
Self Post EQ/
Mix21-24 OUT/
CH1-8 Post EQ/
CH9-16 Post EQ/
...
CH41-48 Post EQ
LINK ON/OFF
PreEQ/
PostEQ/
PreDelay/
PostFader
OFF
3 Nominal [-62dBu]
Input
ST A
MIX1-24
PFL/
AFL/
Post PAN
INSERT
INSERT OUT
-10
Nominal Output
(75mW@8Ω)
default setting
4 Nominal [-50dBu]
Input
METER
PostFader
PostON
INPUT
DELAY
COMP
KEYIN
+30
+24
+20
FX4 OUT L/R
FX5 OUT L/R
LEVEL
FX7 OUT L/R
MATRIX 8
Same as the matrix master 1
ON
Rch
METER
TALKBACK
TALKBACK
IN 1-48
SELECT
FX6 OUT L/R
Lch
METER
Same as the above
OSC OUTTo OUTPUT PATCH
To OUTPUT PATCH
HPF LPF
METER
ON
SLOT1-2(1-16)
TB OUT
BYPASS
CUE L
BI DIRECTION
CASCADE
IN
ON/OFF
To OUTPUT PATCH
FX8 OUT L/R
METER
From
CASCADE IN
SELECT
External CUE
SELECT
ON
CUE R
32
From CASCADE IN SELECT
INPUT PATCH
-150
INPUT/
OUTPUT/
DCA
TRIM
32
CUE OUT
DELAY
CUE OUT
DELAY
METER
DIGITAL
CUE
LEVEL
ON
L
CUE
R
To OUTPUT PATCH
CASCADE OUT D-SUB
GEQ 1(...12)
-160
METER
METER
32
To CASCADE IN/OUT RJ-45
Max. DSP Noise Floor
-170
INSERT OUT
31BAND
GEQ
-180
-190
SELECT
1
OUTPUT PATCH
SPECTRUM
ANALYZER
STEREO A
STEREO B
MIX1-24
MATRIX1-8
DIRECT OUT 1-STIN-4R
INSERT OUT
OSC OUT(Lch)
TB OUT
CUE L,R
STEREO A
STEREO B
MIX1-24
MATRIX1-8
DSP5D
CASCADE
OUT
ON/OFF
INSERT IN
12
[0dBu = 0.775Vrms]
[0dBFS = Full Scale]
26
OUT
METER
INSERT
INSERT IN
OUT
3
To METER
SELECT
0
PreFader
IN
METER
To METER
+30
+24
+20
1
PreATT
PreGate
CH 1(...48)
Analog
MSEQ
DCA
EQ
BUS
MASTER
DCA MASTER
OUTPUT
HPF INSERT
INSERT GATE COMP INSERT DELAY LEVEL
INSERT ON PAN
INSERT
INSERT COMP INSERT
BAL
INSERT DELAY
DA
DECDE
(x4)
(x8)
(x8/4)
Adder
LEVEL
(x2)
ON
PATCH
1
MONO
AD
[MIX OUT]
(1~24)
DA
8
95
DIM
dBFS
GAIN
OUT ATT.
MATRIX1
MATRIX2
MATRIX3
MATRIX4
MATRIX5
MATRIX6
MATRIX7
MATRIX8
dBu
Digital
Digital
Digital
Analog
Analog
2
MONO
PM5D V2
INSERT OUT
OSC OUT(Lch)
TB OUT
MONITOR L,R,C
2
24
INSERT OUT
OSC OUT(Lch)
TB OUT
CUE L,R
2
OUT ATT.
SLOT1 16
DITHER
SLOT1
DITHER
SLOT2
2
SLOT2 16
24
SLOT3 16
DITHER
8
SLOT4 16
56
DITHER
92
1
1
2
2
2
24
OMNIOUT24
DA
[OMNI OUT](1-24)
8
92
1
1
2
27