Uniden UH-090 Owner`s manual
Add to my manuals16 Pages
Uniden UH-090 is a dual band CB radio that allows communication on both FM and AM frequencies. It features a range of capabilities to enhance your communication experience, including:
- Easy channel selection with a rotary knob and clear LCD display.
- Adjustable squelch control to filter out unwanted noise and improve signal clarity.
- Instant channel recall and programming to quickly access your preferred channels.
- Scanning capabilities to automatically search for active channels and monitor multiple conversations.
- Duplex mode to communicate with repeater stations, extending the range and overcoming obstacles.
advertisement
OWNER’S MANUAL
UNIDEN Model UH-090
Dual Band CB Radio (FM & AM)
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Contents
Introduction
Features
Preventive Maintenance
Troubleshooting
Controls / Connectors / Indicators
Controls and Connectors
Indicators
Included with Your UH-090
5
Operation
Setting the AM Squelch
Setting the FM Squelch
6
Monitor
Selecting a Channel
Transmitting
Call Function (FM Only)
Using Repeater Channels (FM Only)
Operating the UH-090 in Duplex Mode
Scanning
Open Scan (OS) Mode
Group Scan (GS) Mode
Programming Scan Channels
Selecting the Call Ring tone (FM Only)
Roger Beep (FM Only)
Busy Channel Lockout (FM Only)
10
10
10
VOX Operation (optional VOX headset required) (FM Only) 10
Programming the Instant Priority Channel 11
Recalling the Instant Channel
Dual Band Watch
CTCSS (FM Only)
11
11
11
8
9
9
9
6
7
7
7
7
8
8
Frequency Lists
FM UHF - CB Frequency List
AM - CB Frequency List
CTCSS Tone List for FM Mode
12
12
12
13
Specifications
Warranty
Technical Support and Service
13
14
14
2
2
2
3
3
4
1
Introduction
The Uniden UH-090 is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withstanding harsh environments.
We are certain that you will enjoy your UH-090. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit.
Features
Transmitt & Receive FM 40CH (UHF-CB, TX Power
5w)
Transmitt & Receive AM 40CH (AM Band, TX Power
5w)
LCD Display with Backlight
Signal Strength Meter
RF Power Indicator
Speaker Audio Volume Level Meter
One touch FM or AM Mode selectable
Dual Band Watch
Instant Channel programmable separately FM/AM
Modes
One touch Instant Channel recalling
Duplex Capability (from CH01 - CH08 per channel)
FM Only
FM Group Scan and Priority CH Watch
FM Open Scan
AM Group Scan with Priority CH Watch
AM Open Scan
Scan Channel Memory On/Off separately with FM Open
Scan, FM Group Scan, AM Open Scan and AM Group Scan
Rotary Channel Select
Busy CH Lock-out Function - (FM Only)
Roger Beep Function On/Off (FM VOX Mode Only)
2 Different Ring Tones (FM Only)
38 Built-in CTCSS (Continuous Tone Coded Squelch System) codes that are user selectable (FM Only)
2 Levels Preset Squelch (FM Only)
Variable Squelch Level adjust (AM Only)
Volume Control with Power On/Off Switch
VOX (Voice Activated Function) (FM Only)
10 Steps VOX Mic sensitivity adjustment (FM Only)
Memory Backup if power fails
Preventive Maintenance:
The following system checks should be made every six to twelve months:
Check the Standing Wave Ratio (SWR).
Inspect the tightness of all electrical connections.
Inspect the antenna coaxial cable for wear or breaks on the shielding.
Inspect the tightness of all screws and other mounting hardware.
Troubleshooting:
Should the unit malfunction or perform poorly, follow these procedures:
If the transceiver is completely inoperative...
Check the power cord and fuse.
If there is trouble with receiving...
Check the VOLUME control setting. Be sure the SQUELCH is adjusted properly. Possibly the radio is oversquelched.
If there is trouble with transmitting...
Check that the transmission line (coaxial cable) is securely connected to the ANTENNA connector.
Check that the antenna is fully extended for proper operation.
Check that all transmission line (coaxial cable) connections are secure and free of corrosion.
NOTE
Blackening may occur on the Liquid Crystal Display. If the UH-090 has been subjected to extreme high temperature (above . This is not a fault. Normal LCD operation resumes when the temperature stabilizes back to standard operating conditions (0 to 55°C).
2
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Controls / Connectors / Indicators
2 1 3
4
5 6
13
14
Front
Rotary
Channel
Selector
SLCT
STORE
TX FM AM
DUAL DUP SQT INST
SCAN
SLCT
GS MON MEM
BCL
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
VOX
CTCSS
S/RF VOL
VOL
SQ
INST
INST SET
FM SQ
CTCSS
7 8
15
9 10 11 12
16
Rear
EXT.SP.
DC 13.8V
HF ANT.
UHF ANT.
Controls and Connections
Ref. Item
1
2
3
4
5
6
7
8
9
Liquid Crystal Display (LCD)
Page
4
Rotary Channel Selector
On/Off Volume & AM Squelch
Push to Talk (PTT) Switch
Call Button
7
6
7
7
Monitor Button
SLCT - Select Button
FM/AM and Dual Band Watch
Scan On/Off and Open or Group
7
7, 11
8, 9
Ref. Item
10
On/Off
Page
Memory Scan Channels and Duplex 8, 9
11 Instant Channel Recall and Instant
Channel Programming
11
12
13
FM Squelch and CTCSS Tone
Extension Speaker
14
15
16
Power Input (13.8V DC)
HF Antenna Connection (AM) -
-
UHF Antenna Connection (FM) -
6, 11
-
3
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Controls / Connectors / Indicators
23 22
21
20
19
24
25
26
27
TX FM AM
DUAL DUP SQT INST
SCAN
SLCT
GS MON MEM
BCL
30 31
28 29
32 33 34
18
17
VOX
CTCSS
35
S/RF VOL
36 37
Indicators
Ref. Item
16 VOX - Voice Operated Microphone
Page
10
Ref. Item
MON - Monitor
17 CTCSS - Continuous Tone Coded
Squelch System
11
30 SLCT - Select
19 INST - Instant Channel 11
20
21
22
23
24
25
AM - AM Mode
SQT - Tight FM Squelch
BCL - Busy Channel Lockout
FM - FM Mode
TX - Transmit
7
6
7
7
32 - Roger Beep
34 - Channel Number
- CTCSS Tone
DUP - Duplex 8
35
Dual - Dual Band Watch 11
36 S/RF - Receive Signal or
Transmit RF Power
26 GS - Group Scan 9 37 VOL - Receive Audio Volume
27 SCAN - Scan mode 8
Page
7
9
10
10
10
10
7
11
-
-
4
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Included with your UH-090
OWNER’S MANUAL
UNIDEN Model UH-090
Dual Band CB Radio (FM & AM)
UH-090 Owners Manual Microphone
Mounting Bracket, Knobs,
Rubber Washer, Washer Stars and Screws
Microphone Hanger, Screws and Washers
AFFIX
ST
AMP
HERE
Uniden Australia Pty Limited
Attn: Service Division
345 Princes Highway
Rockdale NSW 2216
AUSTRALIA
Warranty Registration Sheet DC Power Cord with Fuse
5
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Setting the AM Squelch
Turn the Unit ON by rotating the volume control clockwise. Select AM by pressing .
AM icon appears.
NOTE
You must select a channel which is not in use before setting the SQUELCH control. (see p. 7)
Rotary
Channel
Selector
SLCT
AM
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
S/RF VOL
INST
INST SET
FM SQ
CTCSS
VOL
SQ
Strong Signals
Medium Signals
Weak Signals
Noise
Strong Signals
Medium Signals
Weak Signals
Noise
Strong Signals
Medium Signals
Weak Signals
Noise
Think of the squelch control as a gate. If you turn Squelch fully clockwise it raises the ‘Squelch
Gate’ so high that no signals get through.
If you turn Squelch fully counterclockwise it lowers the
‘Squelch Gate’ to the extent that all signals get through - weak, medium and strong signals and noise.
To set the ‘Squelch Gate’ to the desired level, turn the squelch knob counterclockwise until you hear noise. Then carefully turn the
Squelch knob clockwise until the noise fades. Now only strong signals get through.
Setting the FM Squelch
The FM Band has Automatic Squelch Control. It requires no adjustment. However, if you are in a very high noise area it may break through. Press
ooooo to select the tight squelch mode.
icon appears
The SQT
NOTE
Note: Selecting tight squelch mode may prevent the reception of weak signals.
FM/AM
DUAL
FM
SQT
SCAN
OS/GS
MEM
DUP
S/RF VOL
INST
INST SET
FM SQ
CTCSS
VOL
SQ
6
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Monitor
Press the MONI button on the microphone to open the squelch and receive all weak signals. Press and hold the MONI button for 2 seconds to hold the squelch open. Press MONI again momentarily to cancel.
MONI
Selecting a Channel
channels. Turn the Rotary Channel Selector to select the desired channel.
Rotary
Channel
Selector
SLCT
STORE
FM
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
S/RF VOL
INST
INST SET
FM SQ
CTCSS
Transmitting
Select the desired channel. Press the Microphone’s PTT button and speak normally into the microphone. Hold it approx. 7cm from your mouth. Release the PTT button to end the transmission and listen for a reply.
Call Function (FM Only)
Press the microphone Call Button. A two second ringing tone will be transmitted.
You may select 2 types of ring tones (see p.10 ).
PTT CALL
Using Repeater Channels (FM Only)
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions. In normal Simplex operation, your radio transmits on one particular frequency and receives on that same frequency. If there is a barrier that partially blocks your transmitted signal, the probability of another radio receiving the signal is very slim. Hills, tall buildings, metallic structures, ... etc. tend to act as a screen between radios.
Repeater Station
Normal Simplex Operation
Transmitting on CH 31
Standard Operation without the aid of a Repeater Station
No Signal being Received
CH 31
Operation with the aid of
Repeater Station (Duplex)
CH 01
7
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Using Repeater Channels (FM Only)
The Signal coming from your radio is received by the Repeater Station and then retransmitted at the same time on another channel. This operation is called "Duplexing".
For example,
CH01 on Duplex Mode will Receive on CH 01 but Transmit on CH31
CH02 on Duplex Mode will Receive on CH 02 but Transmit on CH32 etc ....
If you transmit on CH01 Duplex mode, you are actually transmitting on CH31, the repeater station down-converts your signal and retransmits on CH01.
Operating the UH-090 in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for repeater use.
Press and hold for 2 seconds to switch
Duplex On. The DUP icon appears.
Press and hold again for 2 seconds to switch
Duplex off.
MEM
Only channels 01 - 08 are available for Duplex
FM
DUP
S/RF VOL
VOL
SQ
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
INST
INST SET
FM SQ
CTCSS
NOTE
Check with your loacl Retailer for information on available Repeaters
Scanning
The UH-090 has a scanning feature that allows you to search for active channels automatically.
Furthermore, the UH-090 is designed to have two types of scanning; Open Scanning (OS) and Group Scanning
(GS), to give you flexibility and allow you to use the radio more effectively.
Press and Scanning starts. The SCAN icon appears.
FM
VOL
SQ SCAN MEM
S/RF VOL
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
INST
INST SET
FM SQ
CTCSS
8
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Open Scan (OS) Mode
Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning will stop on that channel.
This example shows CH40 active.
FM VOX
CTCSS
If the received signal ceases, the unit will wait 3 seconds for the signal to return, otherwise scanning resumes.
SCAN MEM
BCL
To skip the active channel, press momentarily. Scanning resumes. To deactivate SCAN, press or the PTT button on the microphone.
NOTE
If SCAN is deactivated while on an active channel, the UH-090 will stay on that active channel. If no other channels are active, the
UH-090 will reinstate the starting channel.
NOTE
SCAN
OS is indicated by the absence of the GS icon.
Group Scan (GS) Mode
Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority channel see p. 11)
To use GS Mode Scanning, press and hold for 2 seconds.
GS icon appears on the display. OS Mode is indicated by the absence of the GS icon.
SCAN
FM
INST
VOX
CTCSS
GS
GS Scanning checks the Instant Priority Channel for activity regularly.
If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority Scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel, UH-090 will continue monitoring the Priority Channel for activity while listening to the active one. To deactivate SCAN, press the button or the PTT button.
NOTE
If SCAN is deactivated while tuned to an active channel, the UH-090 will stay on that active channel.
If none of the channels are active, the UH-090 will reinstate the Instant
Priority Channel
Rotary
Channel
Selector
SCAN
FM
GS
S/RF VOL
NOTE
If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start.
SLCT
STORE
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
INST
INST SET
FM SQ
CTCSS
Programming Scan Channels
Select which Scanning Mode you wish to use
- OS or GS (see p. 9). Select the channel you want to store.
FM
Rotary
Channel
Selector
SCAN GS MEM
NOTE
OS is indicated by the absence of the GS icon.
Press to store. MEM icon appears and a short tone beep is heard.
To remove the channel from Memory, press
once more. A short beep is heard and the MEM icon disappears.
SLCT
STORE
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
S/RF VOL
INST
INST SET
FM SQ
CTCSS
9
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Selecting the Call Ring tone (FM Only)
Press once. Turn the Rotary Channel
Selector to either or . Press and hold
Rotary
Channel
Selector
NOTE
If a button is not pressed within 10 seconds the UH-090 will automatically exit Select Mode.
SLCT
STORE
Roger Beep (FM VOX Only)
A Roger Beep may be added to the end of an
FM VOX transmission.
Turn the Channel Selector to display .
Press and hold for 2 seconds to store the new setting.
SLCT
NOTE
If a button is not pressed within 10 seconds the UH-090 will automatically exit Select Mode.
Rotary
Channel
Selector
SLCT
STORE
Busy Channel Lockout (FM Only)
If the channel is already in use, you can prevent the UH-090 from transmitting .
Press 3 times. Turn the Rotary Channel
Selector to display . Press and hold
Rotary
Channel
Selector
NOTE
If a button is not pressed within 10 seconds the UH-090 will automatically exit Select Mode.
SLCT
STORE
SLCT
FM/AM
DUAL
SCAN
OS/GS
SLCT
FM/AM
DUAL
SCAN
OS/GS
SLCT
FM/AM
DUAL
FM
FM
FM
BCL
SCAN
OS/GS
MEM
DUP
MEM
DUP
MEM
DUP
INST
INST SET
FM SQ
CTCSS
INST
INST SET
FM SQ
CTCSS
INST
INST SET
FM SQ
CTCSS
VOX Operation (optional VOX headset required) (FM Only)
Press 4 times. Turn the Rotary
Channel Selector to select the desired VOX sensitivity (1 - 9).
FM
Rotary
Channel
Selector the new setting. Connect the VOX headset.
SLCT
NOTE
If a button is not pressed within 10 seconds the UH-090 will automatically exit Select Mode.
SLCT
STORE
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
VOX
S/RF VOL
INST
INST SET
FM SQ
CTCSS
10
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Programming the Instant Priority Channel
Select FM or AM by pressing . . Turn the Rotary Channel Selector to select the channel you prefer.
FM/AM
Press and hold for 2 seconds to store the new setting (you may select one Instant
Channel for both FM and AM bands). INST icon appears.
Rotary
Channel
Selector
SLCT
STORE
FM/AM
DUAL
FM
INST
SCAN
OS/GS
MEM
DUP
S/RF VOL
INST
INST SET
FM SQ
CTCSS
Recalling the Instant Channel
Dual Band Watch
Select the first channel and band you wish to receive.
Press and hold for 2 seconds. DUAL icon appears.
FM/AM
The UH-090 will now continuosly receive this channel and monitor, every 1.5 seconds, the
‘Instant’
Channel on the opposite band.
If a signal is received on this Instant Channel, the UH090 will beep once and flash AM or FM continuously until the signal stops.
CTCSS (FM Only)
Select the desired channel to use CTCSS.
Press and hold for 2 seconds. CTCSS icon appears.
FM SQ
Turn the Rotary Channel Selector to select the desired CTCSS code. Press once to store the new setting.
FM SQ
Channels 05 and 35 are Emergency Channels and channel 11 is a calling channel. CTCSS cannot be selected on these channels.
Rotary
Channel
Selector
SLCT
STORE
DUAL
FM
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
S/RF VOL
INST
INST SET
FM SQ
CTCSS
Rotary
Channel
Selector
SLCT
STORE
FM
FM/AM
DUAL
SCAN
OS/GS
MEM
DUP
VOX
CTCSS
S/RF VOL
INST
INST SET
FM SQ
CTCSS
NOTE
If a button is not pressed within 10 seconds the
UH-090 will automatically exit Select Mode.
11
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Frequency Lists
CH No.
FM UHF - CB Frequency List
Australia & New Zealand
(MHz) DUP (MHz)
AM - CB Frequency List
Australia ONLY
(MHz)
N Z ONLY
(MHz)
13
14
15
16
09
10
11
12
05
06
07
08
01
02
03
04
476.425
476.450
476.475
476.500
476.525
476.550
476.575
476.600
476.625
476.650
476.675
476.700
476.725
476.750
476.775
476.800
477.175 CH31
477.200 CH32
477.225 CH33
477.250 CH34
477.275 CH35
477.300 CH36
477.325 CH37
477.350 CH38
26.965
26.975
26.985
27.005
27.015
27.025
27.035
27.055
27.065
27.075
27.085
27.105
27.115
27.125
27.135
27.155
26.330
26.340
26.350
27.370
26.380
26.390
26.400
26.420
26.430
26.440
26.450
26.470
26.480
26.490
26.500
26.520
17
18
19
20
476.825
476.850
476.875
476.900
27.165
27.175
27.185
27.205
26.530
26.540
26.550
26.570
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
476.925
476.950
476.975
477.000
477.025
477.050
477.075
477.100
477.125
477.150
477.175
477.200
477.225
477.250
477.275
477.300
477.325
477.350
477.375
477.400
27.215
27.225
27.255
27.235
27.245
27.265
27.275
27.285
27.295
27.305
27.315
27.325
27.335
27.345
27.355
27.365
27.375
27.385
27.395
27.405
26.580
26.590
26.620
26.600
26.610
26.630
26.640
26.650
26.660
26.670
26.680
26.690
26.700
26.710
26.720
26.730
26.740
26.750
26.760
26.770
NOTE: FM Channel 05 and 35 are Emergency Channels and FM Channel 11 is a calling channel.
12
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
CTCSS Tone List for FM Mode
Tone
No.
Tone
Frequency (Hz)
Tone
No.
Tone
Frequency (Hz)
Tone
No.
Tone
Frequency (Hz)
00 (’oF’)
01
02
03
04
05
06
07
08
09
10
11
12
OFF
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
17
18
19
20
13
14
15
16
21
22
23
24
25
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
26
27
28
29
30
31
32
33
34
35
36
37
38
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
NOTE: This List is for FM Channels ONLY. FM Channels 05, 11 and 35 are not CTCSS programmable.
Specifications
General
Channels
Microphone
Speaker
Antenna Connector
Jacks & Connectors
Operating Temperature
Power Requirements
Antenna Impedence
Transmitter (FM)
Frequency Tolerance at 25 C
(5 minutes after turning on) carrier Power
Spurious Emission
Current Drain
Modulation Frequency Response
(1 kHz, 0 dB reference at 1 kHz deviation)
Lower at 500 Hz
Upper at 2.0 kHz
Microphone Sensitivity for
3 kHz Deviation
Maximum Deviation at 1 kHz at 6 kHz
Receiver (FM)
Sensitivity at 12dB SINAD
Overall Audio Fidelity
(1 Khz, 0 dB reference)
Lower at 500 Hz
Upper at 2 kHz
: 40
: 600 ohm,
Dynamic Type
: 8 ohm, 3w
: M -Type
: EXT SP 3.5mm
: 0 to + 55 C
: 13.8 VDC Nominal
: 50 ohms
Receiver (FM) - cont’d
Adjacent Ch Selectivity (+/-25 kHz): 64dB
Max. Audio Output Power : 3W
Audio Output Power at 10% HD : 3W
Hum and Noise Ratio at Input 1 mV: 45 dB
Squelch Sensitivity at Threshold : 0.19 uV
Squelch Sensitivity at Tight
Image Rejection Ratio
IF Rejection Ratio
Oscillator Dropout Voltage
Current Drain at NO Signal
Current Drain at Max. Output
: 1 uV
: 60 dB
: 85 dB
: 9V
: 350mA
: 730 mA
: +/- .5 kHz
: 5W (max)
: -40 dBm
: 1.5 Amps
Transmitter (AM)
Power Output
Modulation
: Max. Legal Output
Power
: Class B
( Amplitude
Modulation)
: -6dB
: +5 dB
: 5mV
: +/- 4.5 kHz
: +/-1.5 kHz (max)
: 0.23 uV or better
: +5 dB
: -7 dB
Receiver (AM)
Sensitivity
Selectivity
Image Rejection
Automatic Gain Control
Squelch
: 0.5 uV for 10dB;(S
+ N) /N typical
: 6dB @ 7KHz, 55dB
@ 10KHz typical
: 65 dB typical
: (AGC) - less than
10dB change in
audio output for
input from 10 to
50,000 microunits
: Adjustable;
threshold less than
0.5 uV
13
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Warranty
ONE YEAR LIMITED WARRANTY
IMPORTANT: Evidence of the original purchase is required for warranty service.
WARRANTOR: Uniden New Zealand Limited. Uniden Australia Pty Ltd. ACN 001 865 498
ELEMENTS OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty its UH-090 hereinafter referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only is only valid in the original country of purchase and shall be of no further effect 12 months after the date of original retail sale. This warranty will be deemed invalid if the Product is: (A) Damaged or not maintained as reasonable and necessary, (B) Modified, altered or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) Improperly installed, (D) repaired by someone other than an authorised Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as a part of a system not manufactured by Uniden. (F) Where the Serial No. label of the product has been removed or damaged beyond recognition.
PARTS COVERED: This warranty covers for one (1) year, the UH-090 tranceiver only. All accessories (Mounting bracket, Microphone etc.) are covered for 90 days only.
STATEMENT OF REMEDY: In the event that the Product does not conform to this warranty at any time while this warranty is in effect, the warrantor, at its discretion, will repair the defect or replace the Product and return it to you without charge for parts and service. THIS WARRANTY
DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT
IN ANY WAY AFFECT YOUR RIGHTS UNDER THE CONSUMER ACT.
WARRANTY CARD: If a Warranty Card has been included with this Product, please complete and return to us within 14 days of purchase. Your name and the serial number of the Product will then be registered in our database and this will help us process your claim with greater speed and efficiency should you require warranty service.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: in the event that the Product does not conform to this warranty, the Product should be shipped or delivered, freight prepaid, with evidence of original purchase (e.g. a copy of the sales docket) to the warrantor at:
Technical Support & Service
Should you find it desirable or necessary to service your UH090, we suggest you contact the Uniden Dealer where your purchase was made. Your dealer will be able to assist you with complete service information.
If you require service that is within the terms of your warranty you should present a copy of your receipt to your dealer to authenticate your claim.
If you find it inconvenient to obtain service assistance from a dealer, please pack your radio in a suitable container that will provide adequate protection. Enclose a note describing the problem and a copy of your receipt, and send the radio transportation prepaid to:
UNIDEN AUSTRALIA PTY LIMITED
SERVICE DIVISION
345 Princes Highway,
Rockdale, NSW 2216
AUSTRALIA
Ph: (02) 9599-3100
Fax: (02) 9599-3278
Toll Free: 1300 36 895 www.uniden.com.au
UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION
150 Harris Road,
East Tamaki,
Auckland,
NEW ZEALAND
Ph: (09) 273 8383
Fax: 274 0009
Toll Free: 0800 486 4336 www.uniden.co.nz
14
Printed in the Philippines
PPC: UTZZ01879ZZ
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project