Miele CM 5200 Operating instructions

Operating Instructions
Freestanding coffee machine
CM 5200
To prevent accidents
and machine damage
read these instructions
before
installation or use.
en - US
M.-Nr. 09 319 110
Contents
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Button illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Preparing the coffee machine for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning on for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Filling the water tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning the machine On / Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pre-heating cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To switch cup heating on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the coffee dispensers to the cup height. . . . . . . . . . . . . . . . . . . . . . 18
Canceling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Espresso or coffee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Preparing espresso or coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Preparing two portions at one time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making coffee or espresso using ground coffee . . . . . . . . . . . . . . . . . . . . . . . 21
Adding ground coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Making coffee or espresso using ground coffee . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Specialty coffees with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Preparing two portions at one time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
After dispensing milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Preparing hot water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting the grinder setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Grinder setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Adjusting the strength of the coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Pre-brewing the coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Brewing temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting the serving size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2
Contents
The SETTINGS menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Possible setting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Time of day and clock display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Timer functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
To display information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
To lock the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Demo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Rinsing the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Rinsing the milk system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the milk system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Cleaning the stainless steel milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Drip tray and waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Bean container and ground coffee chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Descaling following display reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Selecting Descale from the MAINTENANCE menu . . . . . . . . . . . . . . . . . . . . . . . . 59
Energy saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Evaporating the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
3
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances basic safety precautions should always be
followed, including the following:
Read all instructions before installation or use of the coffee system.
Proper Use
Please read these instructions
carefully to prevent accidents and
machine damage.
This appliance complies with current
safety requirements. Improper use
of the appliance can cause personal
injury and material damage.
Read this safety information carefully
before operating the appliance.
They contain important information
on the safe installation, operation,
and care of your coffee system. To
avoid the risk of personal injury or
damage to the coffee system, it is
important that you carefully read the
instructions.
Keep these instructions in a safe
place and pass the on to any future
user.
4
~ This coffee system is not designed
for commercial use. It is intended for
household use and only, for the
preparation of coffee, cappuccino,
espresso, etc.
Do not use appliance other than for its
intended use. Any other use could be
dangerous.
~ This coffee machine is not intended
for outdoor use.
~ The coffee machine is intended for
household use only for the preparation
of coffee, cappuccino, espresso, latte
macchiato, etc.
Any other use is not supported. Miele
cannot be held liable for damage
resulting from incorrect or improper
use.
~ Persons which lack physical,
sensory or mental abilities or
experience with the machine should not
use it without supervision or instruction
by a responsible person.
IMPORTANT SAFETY INSTRUCTIONS
Children
Caution! The coffee and hot water
dispensers present a danger of
burning or scalding!
Children's skin is very sensitive and
reacts to hot temperatures.
~ Keep the coffee system out of reach
of children.
~ Close supervision is necessary
when the coffee machine is used near
children.
~ Be certain your appliance is
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
~ Do not operate any appliance with a
~ Never let children play with the
coffee machine.
damaged cord or plug, or after the
appliance malfunctions or has been
damaged in any manner. Contact
Miele.
Technical safety
~ Unplug the machine from the power
~ Before installing the coffee machine,
supply immediately if you notice any
damage or smell scorching, for
example.
check for externally visible damage. If
the coffee system is damaged, it may
pose a safety hazard and must not be
used under any circumstances.
~ Before connecting the coffee
machine, check the voltage and
frequency indicated on the data plate
against the voltage and frequency of
the household electrical supply.
The values must correspond in order to
prevent damage to the coffee machine.
If in doubt, consult a qualified
electrician. To disconnect, turn the
main switch at the back of the machine
to 0, then remove the plug from the wall
outlet.
~ Ensure that the power cord will not
be pinched or damaged by any sharp
edges.
~ Ensure that the power cord does not
hang down. Someone could trip over it
and the machine could be damaged.
~ The coffee machine must not be
used in mobile installations such as
ships.
~ The ambient temperature should be
between 50°F (10°C) and 90°F (32°C).
~ Ensure that there is sufficient
ventilation around the coffee machine.
Do not cover the vents on the top.
5
IMPORTANT SAFETY INSTRUCTIONS
~ Do not place the appliance on or
near a hot gas or electric burner, or in a
heated oven.
~ The use of accessory attachments
not recommended by the appliance
manufacturer may result in fire, electric
shock or injury to persons.
~ Protect the coffee machine from
water and water spray.
~ Installation, maintenance and
repairs may only be carried out by
qualified technicians.
~ Repairs must only be performed by
a trained technician in accordance with
national and local safety regulations.
Repairs and other work by
unauthorized persons could be
dangerous and may void the warranty.
~ Defective components should be
replaced by Miele original parts only.
Only with original Miele parts can the
manufacturer guarantee the safety of
the appliance.
~ Unplug from outlet when not in use
and before cleaning and care. Allow to
cool before putting on or taking off
parts, and before cleaning the
appliance.
~ Never open the outer casing of the
appliance. Tampering with electrical
connections or components and
mechanical parts is dangerous and
may cause machine damage.
~ To protect against fire, electric
shock and injury to persons do not
submerge the cord, plugs or coffee
machine in water or other liquids.
6
~ If the coffee system will not be used
for an extended period of time, turn it
off by using the main power switch.
Safety
Caution! The coffee and hot water
dispensers present a danger of
burning or scalding! The liquids and
steam dispensed are very hot.
~ Keep away from the areas under the
coffee dispensers when beverages or
steam are being dispensed.
~ Do not touch hot components. Use
handles or knobs.
~ The spouts can spray hot liquid or
steam. Be sure the cappuccinatore is
fitted correctly and only use it if it is
clean.
~ Do not use the coffee machine to
clean objects.
~ Clean the coffee machine and the
milk flask (depending on model)
thoroughly before using for the first
time. Before first use, flush the coffee
and milk supply lines thoroughly (see
"Cleaning and care").
~ Only fill the water container with
cold, fresh tap water. Warm or hot
water and other liquids can damage the
coffee machine.
~ Change the water every day to
prevent a build-up of bacteria.
~ Do not use mineral water. Mineral
water will cause serious limescale
deposits to build up in your coffee
machine and damage it.
IMPORTANT SAFETY INSTRUCTIONS
~ Fill the bean container only with
roasted whole coffee beans. Do not fill
the bean container with coffee beans
which have been treated or with ground
coffee.
~ Do not reach into the grinder.
~ Only put ground coffee or cleaning
tablets to the ground coffee chute. The
cleaning tablets remove grease from
the brew unit of the coffee machine.
~ Only use plain milk. Flavored milk
products contain substances that can
clog the milk system.
~ Do not use coffee beans which have
been treated with caramel, sugar, or fill
the coffee machine with other
sugar-containing liquids. Sugar
damages the machine!
~ Never place a cup with a burning
alcohol-coffee mixture underneath the
main dispenser. This could cause
plastic parts of the coffee machine to
catch fire and melt.
~ Do not place any open flame, e.g. a
candle, on or near the coffee machine.
The coffee machine could catch fire
and the fire could spread.
~ Disconnect the coffee machine from
the power supply before cleaning.
~ Clean the coffee machine and the
milk flask (depending on model) daily
(for further information see "Cleaning
and Care").
~ Descale the coffee machine
regularly with the appropriate number
of Miele descaling tablets for the water
hardness level in your area. Descale
the machine more frequently in areas
with very hard water. The manufacturer
cannot be held liable for damage
arising from insufficient descaling.
~ Degrease the brew unit regularly
with the supplied Miele cleaning
tablets. Depending on the natural oil
content of the coffee used, the brew
unit can become blocked quite quickly.
~ Used coffee grounds from the waste
container should be disposed of with
organic waste or put on the compost
heap Coffee grounds can clog the sink.
For machines with stainless steel
trim:
~ Do not use sticky notes, transparent
adhesive tape, masking tape or other
types of adhesive on the surface of the
trim. These damage the surface,
causing it to lose its dirt repellent
protective coating.
~ The surface of the stainless steel
trim is susceptible to scratching. Even
magnets can cause scratches to
appear.
SAVE THESE INSTRUCTIONS
AND REVIEW THEM
PERIODICALLY
~ Do not use a steam cleaner to clean
this machine. The steam could cause a
short circuit.
7
Guide to the machine
a Cup warming surface
h Drip tray cover
b Bean container, ground coffee chute
and rotary selector to control the
fineness of the ground coffee
i Milk tube aperture
c Display and controls
d Hot water spout
e Central spout with integrated
cappuccinatore
f Waste container
g Drip tray
8
j Main switch
k Compartment for quick guide
l Water container
m Milk container
(depending on model)
Guide to the machine
Display and controls
Drink buttons
Rotary selector d
Press these buttons to prepare the
desired drink.
You can select from the different
menu options using the rotary selector.
The symbols mean:
On/Off button - c
.
Espresso b
/
Coffee a
k
Latte Macchiato g
The On/Off button - turns the coffee
machine on and off (Standby), if the
main switch on the back is turned on.
H
Cappuccino f
To prepare a drink, press the
corresponding button once.
For two portions of a drink, press the
corresponding button briefly twice in
succession.
Display h
The display gives information about
current action or status of the coffee
machine.
To specify portion size (programming
amount), hold the drink button down for
more than 3 seconds.
OK button e
With the OK button you confirm display
information and save settings.
9
Guide to the machine
Button illumination
Calling up a menu
When the drink buttons are illuminated,
you are in the main menu and can
prepare drinks. If drink preparation has
commenced, only the corresponding
drink button is illuminated.
^ You can call up menus by holding
the OK button for more than
2 seconds
The semicircle also lights up on the
OK button shortly before the steam is
produced, e.g. for milk froth.
Using the rotary selector, you choose
from
– OTHER DRINKS
– MAINTENANCE
The OK button and the semicircle are
illuminated when a menu is called up,
when an option selection is possible or
if an action requires confirmation.
– SETTINGS
Operation
You will be able to start actions or alter
settings in the selected menu.
You are in the main menu when the
display shows:
Exiting a menu level
SELECT TYPE OF DRINK
r
^ Press the OK button to confirm your
selection.
s
If r and s appear in the display, you
can select further options using the
rotary selector.
^ Turn the rotary selector until BACK
appears in the display.
Press the OK button.
or
^ Press the OK button for 2 seconds .
To select an action or setting
^ Turn the rotary selector until the
action or setting you want appears in
the display.
Press the OK button.
You will be able to identify the current
active setting by the check B.
^ To save a setting, press the
OK button.
10
or
If none of the buttons has been pressed
for a while, the coffee machine will
revert to the main menu.
Preparing the coffee machine for use
Turning on for the first time
Please read the operating
instructions and take the time to
familiarize yourself with the coffee
machine before using it for the first
time.
When you turn the coffee machine on
for the first time, you will be prompted
to set the following after the welcome
screen has appeared:
– Language
Before using for the first time
– Time format
^ Set up the coffee machine and
remove any protective film (see
"Installation").
– Time of day
Clean the coffee machine thoroughly
(see "Cleaning and Care") before
filling it with water and coffee beans.
^ Insert the plug of the coffee machine
into the outlet (see "Electrical
connection").
^ Press the On/Off button -.
The welcome message MIELE WILLKOMMEN will appear in the
display briefly.
To set the language
^ Turn the rotary selector until the
language you require appears in the
display.
Press the OK button.
The setting is now saved.
To set the time format
^ Select 12 H, if you want the time to
be shown as a 12 hour clock.
or
^ Select 24 H, if you want the time to
be shown as a 24 hour clock.
^ Set the main switch at the back of the
coffee machine to "l".
^ Press the OK button.
The setting is now saved.
11
Preparing the coffee machine for use
To set the time of day
Water hardness
^ Turn the rotary selector until the
current hour appears in the display.
Press the OK button.
Water hardness is an indication of the
amount of minerals dissolved in water.
The higher the mineral content, the
harder the water. And the harder the
water, the more often the coffee
machine will need to be descaled.
^ Turn the rotary selector until the
current minutes appear in the
display.
Press the OK button.
The setting is now saved.
SET UP SUCCESSFUL will now appear
in the display.
^ Press the OK button.
In the display you will see:
Set the water hardness level on the
coffee machine to the water hardness
level for the local area to ensure that
the machine functions correctly and is
not damaged. This will ensure that the
reminder to descale the machine will
appear in the display at the correct
time.
FILL WATER CONTAINER
AND PLACE IN MACHINE
^ Fill the water container with cold,
fresh tap water.
TIP Place a suitable container
underneath the hot water spout.
There is a choice of four water
hardness levels:
In the display you will see:
r
SYSTEM FILLING UP
START
The coffee machine monitors the
quantity of water and steam used. The
number of drinks which can be
dispensed before the machine needs to
be descaled will depend on the water
hardness level set.
s
^ Press the OK button.
TIP Continue following the instructions
given in this booklet to set up your
machine and familiarize yourself with it.
– Level 1 (soft):
0 - 3 gr/gal (0 - 3 °dH)
– Level 2 (moderate):
4 - 7 gr/gal (4 - 7 °dH)
– Level 3 (hard):
7 - 15 gr/gal (7 - 14 °dH)
– Level 4 (very hard):
15 - 22 gr/gal (14 - 21 °dH)
12
Preparing the coffee machine for use
Determining the water hardness
Setting the water hardness level
You can test the water hardness with
the supplied test strips. Your local
water supplier will also be able to
advise you on the water hardness in
your area.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
WATER HARDNESS
s
^ Select WATER HARDNESS and press
the OK button.
^ Dip the test strip in water for a
second, then shake off any excess
water. The result will be visible after
about one minute.
^ Turn the rotary selector until the water
hardness level you require appears
in the display.
Press the OK button.
The setting is now saved.
You can now set the water hardness
level for the coffee machine.
13
Filling the water tank
The quality of the water used plays an
important part in the overall quality of
the coffee.
The water tank should be emptied
and filled with fresh, cold tap water.
Hot or warm water, or other liquids
could damage the coffee system.
Do not use mineral water. Mineral
water will cause lime scale deposits
to build up in the machine, possibly
damaging it.
^ Open the lid on the left hand side of
the coffee system a. Pull the water
tank up and out using the handle b.
^ Fill the water tank with fresh, cold tap
water to the "Max." mark.
Be sure the area under the water
tank is clean and free of
obstructions. If the water tank is not
seated correctly the drainage valve
will not be sealed. Clean if
necessary.
^ Replace the water tank. Make sure
the tank fits correctly onto the notch
at the top of the housing.
^ Close the lid.
14
Filling the coffee bean container
Fill the coffee bean container with
roasted espresso or coffee beans.
Important: Only use roasted
espresso or coffee beans in the
container.
Anything else, including ground
coffee, will damage the grinder.
Important: Do not use coffee beans
that have been treated with sugar,
caramel or other substances. Do not
put drinks containing sugar in the
coffee bean container. Sugar will
damage the machine.
^ Open the lid on the right of the coffee
system a. Remove the coffee bean
container lid b.
^ Fill the container c with roasted
coffee beans.
^ Replace the bean container lid, close
the coffee system lid.
TIP Only add enough beans to last for a
few days. Contact with the air causes
the beans to loose their flavor.
15
Turning the machine On / Off
The On/Off button - (Standby) can be
used to turn the coffee system on or off,
if the main switch at the back of the
machine is turned on.
Turning on
When the machine is turned on, it heats
up and rinses out the pipework. This
cleans and heats the pipework ready
for coffee preparation. After rinsing, hot
water will run into the drip tray.
TIP If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container
underneath the coffee dispensers
before preparing the first coffee of the
day.
If the coffee machine still has an
operating temperature higher than
140°F (60°C), rinsing will not take
place.
^ Press the On/Off button -.
The following will appear in the display:
HEATING UP PHASE
The following appears in the display
after heating up:
RINSING
Hot water will flow from the coffee
dispensers.
The main menu will then appear in the
display:
SELECT TYPE OF DRINK
You can now prepare drinks.
16
Turning off
^ Press the On/Off button -.
The coffee machine rinses the coffee
pipework before turning off.
If you have made a drink with milk, the
following message appears in the
display:
RINSE THE
MILK SYSTEM
^ Press the OK button to rinse the milk
system.
^ Follow the instructions given in the
display.
The milk system is rinsed out.
If the milk system is not rinsed
before turning off, the message
RINSE THE MILK SYSTEM or CLEAN
THE MILK SYSTEM will appear in the
display next time the machine is
turned on.
Follow the instructions in the display
next time the machine is turned on
(see "Rinsing the milk system").
TIP To save energy, use the main
switch at the back of the coffee
machine to turn it off if it is not going to
be used for a long period of time,
e.g. during holidays.
Please note that the time of day will not
be saved and must be entered again
the next time the coffee machine is
turned on.
Pre-heating cups
Cups should always be pre-heated to
allow the flavor of espresso and other
coffee drinks to develop and be
retained.
The smaller the volume of
coffee/espresso and the thicker the
cup, the more important it is to pre-heat
the cup.
You can use the cup heating surface on
the top of the coffee machine to
pre-heat coffee cups and glasses. The
cup heating function must be turned
on.
To switch cup heating on or off
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
CUP HEATING
s
^ Select CUP HEATING and press the
OK button.
^ To turn cup heating on, turn the
rotary selector until YES appears in
the display.
or
^ To turn cup heating off, turn the
rotary control until NO appears in the
display.
^ Press the OK button.
^ Arrange the cups or glasses on the
cup heating surface on the top of the
coffee machine.
The cup heating surface will be heated
continually until the coffee machine is
turned off.
17
Adjusting the coffee dispensers to the cup height
The coffee dispensers can be raised or
lowered to the height of your cup. If the
dispensers are closer the beverage will
not cool down as quickly and the crema
will have a better consistency.
^ Pull the coffee dispenser down to the
same level as the rim of the cup.
or
^ Push the dispenser up until there is
enough room to fit a larger cup or
mug underneath.
18
Canceling preparation
Preparation can be canceled while
STOP is showing in the display.
To cancel the preparation of coffee or
espresso,
^ press the OK button.
Drink preparation will be canceled.
To cancel the preparation of specialty
coffees with milk or two portions of a
drink, you can cancel
– the preparation of the ingredients
individually or
– the preparation of the entire drink.
To cancel an individual stage, e.g. milk
froth,
^ press the OK button once.
To cancel preparation of a whole drink,
^ press the OK button twice.
or
^ press and hold the OK button.
Drink preparation will be canceled.
TIP During the grinding and heating up
phases, preparation of the whole drink
can be canceled with one press of the
button.
19
Espresso or coffee
Preparing espresso or coffee
When the . or / buttons are pressed,
the coffee system automatically grinds
the beans to brew the coffee.
SELECT TYPE OF DRINK will appear in
the display.
^ Place a cup under the coffee
dispensers.
^ To make an espresso press the .
button.
or
^ To make a coffee press the / button.
The chosen beverage will now be
dispensed.
To ensure that any residues from the
factory testing process are removed
from the brewing system, please
discard the first two cups of coffee
when using the machine for the first
time.
20
Preparing two portions at one
time
You can request two portions of
espresso or coffee at once in one cup
or in two separate cups simultaneously.
To prepare two cups of coffee or
espresso at the same time:
^ Place a cup under each coffee
dispenser.
^ Press the button for the desired drink
twice.
Two portions of the desired drink will be
dispensed from the coffee dispensers.
Making coffee or espresso using ground coffee
To make espresso or coffee using
ready ground coffee, add a portion of
ground coffee to the ground coffee
chute.
This allows you to prepare a
decaffeinated coffee, if the bean
container is already filled with regular
coffee beans for example.
The coffee machine will automatically
recognize that ground coffee has been
placed in the chute.
Only one portion can be prepared at a
time when using ready ground coffee.
Adding ground coffee
Use the scoop supplied with the
machine to ensure the correct amount
of ground coffee is used.
Do not add more than one level
scoop of ground coffee to the coffee
chute. If too much ground coffee is
added to the ground coffee chute
the brew unit cannot process it.
The coffee machine uses all the
coffee powder which is put in to
dispense the next drink.
^ Open the lid on the right hand side of
the coffee machine a.
^ Open the lid of the ground coffee
chute b. Add one level scoop of
ready ground coffee into the ground
coffee chute c.
^ Close both lids.
The following message appears in the
display:
r
GROUND COFFEE
YES B
s
^ To prepare the coffee/espresso using
ground coffee, confirm with the
OK button.
or to cancel preparation with ground
coffee:
^ Turn the rotary selector until NO
appears in the display.
^ Press the OK button.
The ground coffee will be directed into
the waste container.
21
Making coffee or espresso using ground coffee
Making coffee or espresso
using ground coffee
You can now select whether you want
to dispense a coffee or an espresso
made with ground coffee.
If no button is pressed within
approx. 15 seconds, the ground coffee
is emptied into the waste container.
The following message appears in the
display:
SELECT DRINK
USE GROUND COFFEE
^ Place a cup under the coffee
dispensers.
^ To make an espresso press the .
button.
or
^ To make a coffee press the / button.
The desired coffee drink is prepared.
22
Specialty coffees with milk
You can choose from a variety of
specialty coffees. with milk
Cappuccino consists of about
two-thirds milk froth and one-third
espresso.
Stainless steel milk flask
(depending on the model)
The stainless steel milk container helps
keep the milk cold for longer. Cold milk
gives best results for milk froth.
Latte macchiato consists of one-third
each of hot milk, milk froth and
espresso.
Caffè latte consists of hot milk and
coffee.
Hot milk or milk froth can also be
prepared just as easily.
TIP For best results use cold milk for
making milk froth.
Preparation
^ Connect the stainless steel suction
tube to the inside of the lid. Make
sure that the slanted end is pointing
downwards, as shown.
^ Fill the flask with milk up to a
maximum of 3/4"( 2 cm) below the
rim. Place the lid on the flask.
^ Connect the stainless steel angled
end of the milk tube to the top of the
lid until it clicks into place.
^ Place a container with sufficient milk
beside the coffee machine on the left
hand side.
^ Place the milk flask on the left hand
side of the coffee machine. Connect
the other end of the milk tube to the
cappuccinatore.
^ Insert the milk tube into the container.
Make sure that the milk tube is
sufficiently submerged in the milk.
23
Specialty coffees with milk
Making specialty coffees with
milk
Caution! Danger of burning and
scalding from hot steam coming out
of the cappuccinatore. The liquids
and steam dispensed are very hot.
The coffee machine heats up when a
button is pressed to request a drink.
HEATING-UP PHASE will appear in the
display.
Steam is then used to heat the milk in
the cappuccinatore. It can also be
frothed if milk froth is required.
If you have not prepared any milk
drinks for some time, rinse the milk
system before preparing the first
drink. This will remove any bacteria
which may have built up in the milk
tube.
Caffè latte, milk froth or hot milk
SELECT TYPE OF DRINK will appear in
the display.
^ Place a suitable container under the
coffee dispensers.
^ Press the OK button until MENU
appears in the display.
r
MENU
OTHER DRINKS
s
^ Turn the rotary selector until OTHER
DRINKS appears in the display.
Press the OK button.
^ Use the rotary selector to select the
drink you want:
– CAFFÈ LATTE
– MILK FROTH
– HOT MILK
^ Press the OK button.
Cappuccino or latte macchiato
The desired coffee drink is prepared.
Use a cup for cappuccino or a glass for
latte macchiato.
Preparing two portions at one
time
SELECT TYPE OF DRINK will appear in
the display.
^ Place a suitable container under the
coffee dispensers.
^ To make an espresso press the H
button.
or
^ To make a latte macchiato press the
k button.
The desired coffee drink is prepared.
24
You can select two portions of
cappuccino or latte macchiato at the
same time.
^ Place a suitable container under
each coffee dispenser.
^ Press the button twice for your choice
of cappuccino H or latte macchiato
k.
The drinks will be dispensed.
Specialty coffees with milk
Specialty coffees using ground After dispensing milk
coffee
You can also make cappuccino, latte
macchiato or caffè latte from ground
coffee.
^ Fill the ground coffee chute with
ground coffee (see "Espresso or
coffee from ground coffee").
When SELECT TYPE OF DRINK USE
GROUND COFFEE appears in the
display,
^ you can make cappuccino or latte
macchiato at the touch of a button.
Warning! Bacteria can cause
infection.
It is important to clean and rinse the
milk system regularly to avoid the
risk of bacteria building up.
The milk system should be rinsed if
more than an hour has elapsed since
the last preparation of a milk drink (see
"Rinsing the milk system") . If not done,
the milk system can become clogged
with milk residues.
For caffè latte from ground coffee:
^ Press the OK button to call up the
OTHER DRINKS menu and then
prepare caffe latte as described
above.
25
Preparing hot water
You can make hot drinks or preheat
cups using the hot water function.
Caution! Danger of scalding and
burns. The water dispensed is very
hot.
SELECT TYPE OF DRINK will appear in
the display.
^ Place a suitable container under the
hot water spout.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until OTHER
DRINKS appears in the display.
Press the OK button.
^ Select HOT WATER with the rotary
control.
Press the OK button.
Hot water is dispensed into the
container under the spout.
26
To stop dispensing water,
^ press the OK button.
Drink preparation will be canceled.
Adjusting the grinder setting
You can customize the coffee machine
to suit the type of coffee used.
You can:
To avoid damaging the grinder:
– adjust the grinder setting,
only ever adjust the grinder by one
setting at a time.
– change the amount of coffee,
– pre-brew the freshly ground coffee,
and
Grind the coffee beans again if you
want to adjust the grinder to the next
setting.
– set the brewing temperature.
Grinder setting
^ Place a suitable container under the
coffee dispensers.
You can adjust the grinder setting to
suit the type of coffee you are using
^ Open the lid on the right hand side of
the coffee machine.
When the beans are ground correctly
the coffee or espresso will flow evenly
into the cup and have a good crema.
^ Press the . or the / button.
The ideal crema has an hazelnut-brown
color.
There are various ways to tell whether
the coffee grinder is set correctly.
The coffee is ground too coarse, if
– espresso or coffee flows into the cup
too quickly.
– the crema is very pale and uneven.
Set a finer grinder setting.
The coffee is ground too fine, if
– espresso or coffee flows into the cup
very slowly.
– the crema is dark brown.
Set a coarser grinder setting.
^ Turn the grinder control
counter-clockwise, if you want the
beans to be ground more finely.
or
^ Turn the rotary selector for the
grinder setting clockwise, if you want
the beans to be ground more
coarsely.
27
Adjusting the strength of the coffee
Amount of coffee
The coffee machine can grind and
brew 6-14 g of coffee per cup. The
greater the quantity, the stronger the
coffee or espresso.
There are various ways to tell whether
the amount of coffee is set correctly.
The amount of coffee is too low, if
– espresso or coffee flows into the cup
too quickly.
– the crema is very pale and uneven.
– the espresso or coffee lacks body.
Increase the amount of coffee so that
more ground coffee is brewed.
The amount of coffee is too high, if
– espresso or coffee flows into the cup
very slowly.
– the crema is dark brown.
– the espresso or coffee tastes bitter.
Decrease the amount of coffee so that
less ground coffee is brewed.
You can alter the amount of coffee by
selecting a different setting. There is a
choice of three settings.
– mild
– normal
– strong
You can alter the amount of coffee for
espresso, coffee, cappuccino, latte
macchiato and caffè latte individually.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
AMOUNT OF COFFEE
^ Select AMOUNT OF COFFEE and
press the OK button.
^ Use the rotary selector to select the
drink for which you want to set the
coffee amount.
^ Turn the rotary selector until the
setting you want appears in the
display.
Press the OK button.
The setting is now saved.
28
s
Pre-brewing the coffee
Pre-brewing the coffee
When the pre-brewing function is
switched on, the freshly ground coffee
is first moistened with a little hot water.
Then the remaining water is forced
through the moistened coffee at high
pressure. This helps release the flavor
of the coffee.
The pre-brewing function can be turned
on or off. The machine is delivered with
pre-brewing switched off.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
PRE-BREWING
s
^ Select PRE-BREWING and press the
OK button.
^ To turn pre-brewing on, turn the
rotary selector until YES appears in
the display.
or
^ To turn pre-brewing off, turn the
rotary selector until NO appears in
the display.
^ Press the OK button.
The setting is now saved.
29
Brewing temperature
Brewing temperature
The ideal brewing temperature
depends on the type of coffee, and
whether espresso or coffee is being
prepared.
You can set different temperatures for
espresso and coffee There is a choice
of three brewing temperatures:
– low
– normal
– high
TIP Not all types of coffee can
withstand a high temperature. Certain
types are too delicate - the crema on
top would not be as good and the taste
would be impaired.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
TEMPERATURE
^ Select TEMPERATURE and press the
OK button.
^ Use the rotary selector to select the
drink for which you want to set the
brew temperature
^ Turn the rotary selector until the brew
temperature you want appears in the
display.
Press the OK button.
The setting is now saved.
30
s
Setting the serving size
The coffee machine is equipped with
portion programing. You can program
the amount of water used for each
portion of espresso, coffee or hot water
to suit your taste and cup size.
For drinks prepared with milk, you can
also set the duration of the steam used
for heating or frothing the milk. You can
also program the amount of hot milk
and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum portion size possible for
that type of drink will then be saved.
There are two ways to program the
portion amount; either:
Setting the serving size when
making a drink
Press the ., /, H or k button for at least
3 seconds to program the amount for
that particular drink.
For caffè latte, milk froth, hot milk and
hot water you can start portion size
programming by pressing the
OK button for at least 3 seconds after
selecting the drink
Setting portion size for espresso and
coffee
^ Place the desired cup under the main
dispenser.
– when preparing a drink, or
^ Press and hold the . or / button until
PROG. THE AMOUNT appears in the
display.
– if you call up PROG. THE AMOUNT
in the SETTINGS menu.
The selected drink will be prepared and
SAVE will appear in the display.
If there is insufficient water in the
water container, the process will be
stopped. The portion size will not be
saved.
TIP You can cancel programming the
amount as long as CANCEL is visible in
the display.
^ Press the OK button when the cup
has been filled to the level you want.
The portion size programmed will now
be dispensed every time that particular
drink is selected.
31
Setting the serving size
Setting portion size for cappuccino
and latte macchiato
Setting portion size for caffè latte,
milk froth, hot milk and hot water
^ Place the desired cup under the main
dispenser.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the H or k button for at least
3 seconds.
^ Place a suitable container under the
main dispenser.
The ingredients of the drink are now
displayed and their respective
quantities can be changed.
^ Press the OK button until MENU
appears in the display.
Cappuccino: milk froth, espresso
Latte macchiato: hot milk, milk froth,
espresso
^ Using the rotary selector select all
ingredients for which you wish to alter
the portion size. Confirm your
selection by pressing the OK button.
You can see from the check B next to
the relevant ingredient that portion size
can be set for this.
^ Turn the rotary selector until START
appears in the display.
Press the OK button.
The coffee machine starts making the
drink. When SAVE appears in the
display, portion sizes can be set for
each selected ingredient.
^ Press the OK button when the cup
has been filled to the level you want.
^ Save the portion size required for
selected ingredients.
The portion size and ingredients
programmed will now be dispensed
every time that particular drink is
selected.
32
^ Turn the rotary selector until OTHER
DRINKS appears in the display.
Press the OK button.
^ Use the rotary selector to select the
program you want.
^ Press the OK button until PROG. THE
AMOUNT appears in the display.
For Caffè latte the quantities for
individual ingredients – hot milk, coffee
– can be altered as described in
"Setting portion size for cappuccino
and latte macchiato".
For milk froth, hot milk and hot water,
proceed as described in "Setting
portion size for espresso and coffee.
Setting the serving size
Setting the serving size from
the SETTINGS menu
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
PROG. THE AMOUNT
s
^ Select PROG. THE AMOUNT and
press the OK button.
^ Use the rotary selector to select the
drink for which you want to set the
portion size.
^ Turn the rotary selector until START
appears in the display. Press the
OK button.
From now on the drink will be prepared
according to the portion sizes set.
33
The SETTINGS menu
You can use the SETTINGS menu to
customize the coffee machine to suit
your personal requirements.
Calling up the SETTINGS menu
^ Press the OK button for 2 seconds.
r
MENU
SETTINGS
s
^ Turn the rotary selector until
SETTINGS appears in the display.
^ Press the OK button.
Now you can adjust the settings,
display information or check current
settings.
Options which are currently selected
will have a check B next to them.
TIP If the coffee machine is turned off
at the On/Off - switch, you can also
call up the SETTINGS menu in Standby.
Press the OK button for 2 seconds to
do so.
34
The SETTINGS menu
Possible setting options
The factory setting for the currently selected option is shown in bold.
Option
Available settings
Language
English, German and other languages
Time of day
(available in Comfort mode)
Time format
12 H/ 24 H
Set
Timer
(available in Comfort mode)
Set
switch on at / switch off after (1:00) / switch off at
Activate
Switch on at (yes / no) / switch off at (yes / no)
Program the amount
Espresso
Coffee
Cappuccino
Latte Macchiato
Caffè Latte
Milk froth
Hot Milk
Hot water
Amount of coffee
Espresso
mild / normal / strong
Coffee
mild / normal / strong
Cappuccino
mild / normal / strong
Latte Macchiato
mild / normal / strong
Caffè Latte
mild / normal / strong
Pre-brewing
Yes / No
Temperature
Espresso
low / normal / high
Coffee
low / normal / high
Cappuccino
low / normal / high
Latte Macchiato
low / normal / high
Caffè Latte
low / normal / high
Operating mode
Eco mode
Comfort mode
35
The SETTINGS menu
Option
Available settings
Info
Total portions
Coffee drinks
Espresso
Coffee
Cappuccino
Latte Macchiato
Caffè Latte
Milk froth
Hot Milk
Hot water
No. portions until descaling
Water hardness
Soft 1
Medium 2
Hard 3
Very hard 4
System lock
Yes / No
Cup heating
Yes / No
Demo mode
(only available in Standby)
Yes / No
Factory default
Reset
36
The SETTINGS menu
Language
Time of day and clock display
SELECT TYPE OF DRINK will appear in
the display.
If you are operating the coffee machine
in Comfort mode you can set the time of
day and the time format in the clock
display in the SETTINGS menu.
^ Press the OK button until MENU
appears in the display.
The clock can be displayed as:
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
LANGUAGE F
– 24 hour clock
– 12 hour clock
s
^ Select LANGUAGE F and press the
OK button.
^ Select the desired language and
confirm with the OK button.
The setting is now saved and the
display will revert to the previous
screen.
The display will now appear in the
language you have set.
If you select the wrong language by
mistake, find the LANGUAGE option via
the flag symbol F again.
The time of day has to be set for the
timer to work, however it will not be
visible in the display.
You will need to reset the time of day
if there is a power cut or you switch
the coffee machine off with the main
switch.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
TIME OF DAY
s
^ Select TIME OF DAY and press the
OK button.
You can now set the clock display and
the time of day:
To set the clock display
^ Select CLOCK DISPLAY and press
the OK button.
37
The SETTINGS menu
^ Select 24 H, if you want the time to
be shown as a 24 hour clock.
or
^ Select 12 H, if you want the time to
be shown as a 12 hour clock.
^ Press the OK button.
The setting is now saved.
To set the time of day
^ Select SET and press the OK button.
^ Turn the rotary selector until the
current hour appears in the display.
Press the OK button.
^ Turn the rotary selector until the
current minutes appear in the
display.
Press the OK button.
The setting is now saved.
Timer functions
The timer is only available if you are
operating the coffee machine in
Comfort mode.
You can set the timer so that
the coffee machine:
– turns on at a particular time, e.g. in
the morning for breakfast (SWITCH
ON AT).
– turns off at a particular time (SWITCH
OFF AT).
– turns off after a particular length of
time if none of the buttons have been
pressed and no drinks have been
prepared (SWITCH OFF AFTER).
The timer will only work correctly if:
- the time of day has been set
correctly,
- the coffee machine was turned off
using the ON / Off button -.
For "Switch on at" and "Switch off at",
the timer must be activated.
With "Switch off at" and "Switch off
after", remember:
the milk system is not automatically
rinsed out if a milk drink is prepared.
Follow the instructions in the display
next time you switch on (see
"Rinsing the milk system").
38
The SETTINGS menu
Setting the timer
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
TIMER
s
^ Select TIMER and press the
OK button.
^ Turn the rotary selector until SET
appears in the display.
Press the OK button.
The timer function must be activated
for the coffee machine to switch on at
the desired time (see "To activate and
deactivate the timer").
If the coffee machine has turned itself
on automatically 3 times and no drinks
have been dispensed, the machine will
not turn itself on again automatically.
This prevents the coffee machine from
turning itself on unnecessarily, for
example while you are away on holiday.
The programmed times will, however,
remain in memory and will be
reactivated after manually turning the
machine on again.
Switch off at
You can now choose the timer function
you want to set.
^ Select SWITCH OFF AT and press
the OK button.
Switch on at
You can now enter the hours and
minutes.
Please note that the coffee machine
will not switch on at the required
time if you have activated the
system lock.
^ Turn the rotary selector until the hour
you want appears in the display.
Press the OK button.
^ Select SWITCH ON AT and press the
OK button.
^ Turn the rotary selector until the
minutes you want appears in the
display.
Press the OK button.
You can now enter the hours and
minutes.
The setting is now saved.
^ Turn the rotary selector until the hour
you want appears in the display.
Press the OK button.
The timer function must be activated
for the coffee machine to switch off at
the desired time (see "To activate and
deactivate the timer").
^ Turn the rotary selector until the
minutes you want appears in the
display.
Press the OK button.
The setting is now saved.
39
The SETTINGS menu
Switch off after
To activate and deactivate the timer
If none of the buttons has been pressed
or no drink has been prepared, the
coffee machine will turn itself off after
one hour to save energy.
If you have activated the "Switch on at"
option for the timer, c will appear in the
display when the coffee machine is in
Standby mode.
You can change this timer function
setting for "Switch off after" to another
time between 15 minutes and 9 hours.
Proceed as follows:
^ Select SWITCH OFF AFTER and
press the OK button.
You can now enter the hours and
minutes.
^ Turn the rotary selector until the hour
you want appears in the display.
Press the OK button.
^ Turn the rotary selector until the
minutes you want appears in the
display.
Press the OK button.
The setting is now saved. The coffee
machine will now turn itself off after the
set time.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
^ Select TIMER and press the
OK button.
r
TIMER
ACTIVATE
s
^ Turn the rotary selector until
ACTIVATE appears in the display.
Press the OK button.
^ Select SWITCH ON AT to activate or
deactivate this timer function.
or
^ Select SWITCH OFF AT to activate or
deactivate this timer function.
^ Press the OK button.
The setting is now saved.
40
The SETTINGS menu
Operating modes
To select the operating mode
You can operate the coffee machine in
Eco mode or in Comfort mode.
SELECT TYPE OF DRINK will appear in
the display.
The Eco mode is an energy-saving
mode. The coffee machine will switch to
energy saving mode if it has not been
used to prepare a drink for some time.
The coffee machine will heat up again
when a button is pressed. The "Switch
on at" and "Switch off at" timer functions
are not available in Eco mode.
^ Press the OK button until MENU
appears in the display.
In Comfort mode the coffee machine
will remain heated and all functions are
available without restriction. The
amount of energy used in Comfort
mode is considerably higher than that
used in Eco mode.
^ Select OPERATING MODE and press
the OK button.
When the coffee machine is operated in
Eco mode, the following will appear in
the display while the machine is heating
up:
r
HEATING UP PHASE
ECO MODE
s
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
OPERATING MODE
s
^ Select ECO MODE to operate the
coffee machine in energy-saving
mode.
or
^ Select COMFORT MODE to operate
the coffee machine in Comfort mode.
^ Press the OK button.
The setting is now saved.
The coffee machine is delivered with
Eco mode preset.
41
The SETTINGS menu
To display information
To lock the coffee machine
In the menu option INFO the number of
portions prepared for each individual
drink can be displayed.
You can lock the coffee machine to
prevent it being used without your
knowledge, by children, for example.
You can also see whether more than 50
portions can be dispensed before the
machine needs to be descaled (NO.
PORTIONS UNTIL DESCALING).
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
SETTINGS
INFO
^ Press the OK button until MENU
appears in the display.
s
^ Select INFO and press the
OK button.
^ Turn the rotary selector until the
information you want appears in the
display.
To return to the previous menu,
^ press the OK button.
When the system lock is activated,
the "Switch on at" option for the timer
will not work. The timer symbol c will
not appear in the display.
SELECT TYPE OF DRINK will appear in
the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
To activate and deactivate the
system lock
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
SYSTEM LOCK
s
^ Select SYSTEM LOCK and press the
OK button.
^ Select ON, to activate the system
lock.
or
^ Select OFF, to deactivate the system
lock.
^ Press the OK button.
The setting is now saved.
42
The SETTINGS menu
When the coffee machine is switched
off it is locked and drinks cannot be
dispensed.
To deactivate the system lock
temporarily
You can deactivate the system lock
temporarily, if you want to prepare
drinks, for example.
^ Press the OK button for 3 seconds .
You can now prepare drinks.
As soon as you turn the coffee
machine off, the system lock will be
activated again and the coffee
machine is locked again.
Factory default
You can restore the settings back to the
ones which were set when the coffee
machine was delivered - the factory
default settings.
Please refer to the "Possible setting
options" chart for the factory settings
which are shown in bold.
Please note that the following
settings will not be reset:
-
Language
Time of day
Number of drinks dispensed
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
SETTINGS appears in the display.
Press the OK button.
r
SETTINGS
FACTORY DEFAULT
s
^ Select FACTORY DEFAULT and
press the OK button.
^ Turn the rotary selector until
RESTORE appears in the display.
Press the OK button.
The settings are then reset to the
default.
43
The SETTINGS menu
Demo mode
Do not activate this setting for
domestic use.
The coffee machine can be
demonstrated in the showroom or at
exhibitions in "demo mode". In this
mode the machine lights up, but no
drinks are prepared or actions carried
out.
To activate demo mode
^ Follow the instructions given in the
display.
^ Confirm the messages DEMO MODE
ACTIVE and MACHINE HEATING
DEACTIVATED with the OK button.
Demo mode is active.
To deactivate demo mode
^ Turn the coffee machine off with the
main switch. Wait a short while and
then turn the machine on again.
^ Press the OK button to call up MENU.
The coffee machine cannot be
switched off with the
On/Off button - when demo mode
is activated.
^ Press the On/Off button - to turn off
the machine (Standby).
^ Press the OK button to call up MENU.
^ Select SETTINGS and press the
OK button.
^ Select DEMO MODE and press the
OK button.
^ Turn the rotary selector until YES
appears in the display.
Press the OK button.
The following will appear in the display:
DEMO MODE
FOR SHOWROOMS ONLY
^ Press the OK button.
44
^ Select SETTINGS and press the
OK button.
^ Select DEMO MODE and press the
OK button.
^ Turn the rotary selector until NO
appears in the display.
Press the OK button.
The following will appear in the display:
DEMO MODE ACTIVE
FOR SHOWROOMS ONLY
^ Press the OK button.
^ Follow the instructions given in the
display.
^ Confirm the messages DEMO MODE
DEACTIVATED and MACHINE
HEATING ACTIVATED with the
OK button.
The showroom demo program has now
been deactivated.
Cleaning and care
Quick guide
The coffee system must be cleaned regularly to prevent a build-up of bacteria.
Recommended frequency
What do I have to do?
Each time milk is prepared, if more Rinsing the milk system
than one hour has passed since the
last time milk was prepared
Clean the water container
Daily
(before you turn the coffee machine
Clean the waste container
off)
Clean the drip tray and the drip tray cover
Clean
the stainless steel milk flask (depending on the model)
Once a week
Cleaning the milk system
Remove the brew unit and wash by hand
Approx. every 200 portions
Degrease the brew unit (with cleaning tablets)
When prompted
Descale the coffee machine
When necessary
Clean the coffee bean container
Clean the exterior (especially right after descaling)
Some components of the coffee machine are dishwasher safe. Cleaning these
in the dishwasher frequently can however cause them to become discolored
due to regular contact with food residues (e.g. tomatoes) in the dishwasher.
The surface can also become damaged.
Clean by hand only
Dishwasher-safe
–
–
–
–
–
–
–
–
Brew unit
Drip tray
Coffee bean container lid
Stainless steel milk flask
(depending on the model)
Waste container
Drip tray cover
Water container
Integrated cappuccinatore with milk tube
45
Cleaning and care
Danger of burning and scalding on
hot components or by hot liquids!
Always allow the coffee machine to
cool down before cleaning. Note
that the water in the drip tray can be
very hot.
Do not use a steam cleaner to clean
the coffee machine. The steam
could cause a short circuit.
To avoid damage to the surface do
not use the following:
– cleaning agents containing soda,
ammonia, acid or chloride,
– Solvent-based cleansers
– limescale removers,
– stainless steel cleaners,
– dishwasher detergent,
– oven cleaner,
– abrasive cleaning agents,
e.g. powder or cream cleansers,
pumice stones,
– scouring pads, such as pot
scrubbers and sponges, or used
sponges that still contain abrasive
cleanser residue,
– eraser sponges,
– sharp metal scrapers,
46
In the MAINTENANCE menu you can
call up the different care programs and
change care settings.
Calling up the MAINTENANCE menu
^ Press the OK button for more than 2
seconds.
r
MENU
MAINTENANCE
s
^ Turn the rotary selector until
MAINTENANCE appears in the
display.
^ Press the OK button.
TIP If the coffee machine is turned off
at the On/Off - switch, you can also
call up the MAINTENANCE menu in
Standby. Press the OK button for more
than 2 seconds to do so.
Cleaning and care
Rinsing the system
Rinsing the milk system
The coffee machine rinses itself when it
is turned on. This means that the pipes
are pre-heated with warm water ready
for you to prepare a delicious coffee
drink immediately.
If a coffee drink has been prepared, the
coffee machine also rinses itself before
turning off. This removes any remaining
coffee residue.
Rinsing the system manually
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
You should rinse the milk system after
every milk drink preparation, or at least
if more than an hour elapses between
preparation of milk drinks. Milk residue
can clog up the milk pipes.
If milk has been prepared, the coffee
machine reminds you to rinse the milk
system on turning off.
^ Select RINSE THE SYSTEM and
press the OK button.
The following will appear in the display:
r
The milk system consists of the
integrated cappuccinatore in the coffee
dispensers and the milk tube.
Rinsing does not replace cleaning
of the milk system.
^ Turn the rotary selector until
MAINTENANCE appears in the
display.
Press the OK button.
RINSE THE SYSTEM
START
Caution! Bacteria can cause
infection.
It is important to rinse the milk
system regularly to avoid the risk of
bacteria building up.
s
^ Press the OK button.
The piping will now be rinsed through.
The water used for the rinsing process
will run out of the coffee dispensers.
TIP Place a suitable container
underneath the coffee dispensers.
SELECT TYPE OF DRINK will appear in
the display.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
MAINTENANCE appears in the
display.
Press the OK button.
^ Select RINSE MILK SYSTEM and
press the OK button.
47
Cleaning and care
The following will appear in the display:
RINSING THE MILK SYSTEM
START
^ Press the OK button.
Cleaning the milk system
Caution! Bacteria can cause
infection.
It is important to clean the milk
system regularly to avoid the risk of
bacteria building up.
There are two options:
– You can remove and dismantle the
integrated cappuccinatore and either
wash it in the dishwasher or by hand
with hot water and liquid dish soap
– or clean the milk system with the
CLEAN THE MILK SYSTEM program
and Miele cleaner.
^ Place the milk tube into the left-hand
opening in the drip tray, when
instructed in the display.
^ Press the OK button.
The milk system is rinsed out.
The coffee machine will remind you to
clean the milk system at the correct
time.
The following will appear in the display:
CLEAN THE
MILK SYSTEM
^ Press the OK button.
When you confirm the message
CLEAN THE MILK SYSTEM with the
OK button, the internal cleaning
interval counter is reset.
You will not be reminded again.
^ Clean the milk system.
48
Cleaning and care
Dismantling and cleaning the milk
system
The milk system can be cleaned in the
dishwasher or by hand using hot water
and liquid dish soap.
Place the individual components in the
dishwasher for thorough cleaning.
^ Pull the coffee dispensers all the way
down.
^ Dismantle the integrated
cappuccinatore. Clean all
components thoroughly.
If the milk tube is blocked, clean under
running water with the brush supplied.
^ Insert the brush into the milk tube
and move it back and forth until there
are no more no milk residues in the
tube.
^ Lift the cover forward and off.
^ Pull the integrated cappuccinatore
down and remove it.
49
Cleaning and care
Now re-assemble the cappuccinatore:
^ Reassemble the integrated
cappuccinatore.
^ Turn the rotary selector until
MAINTENANCE appears in the
display.
Press the OK button.
^ Select CLEAN MILK SYSTEM and
press the OK button.
^ Select START and press the
OK button.
^ Push the integrated cappuccinatore
into the central spout. Push hard until
the dispensers are correctly located
under the spout edge.
^ Replace the stainless steel cover and
then push the central spout back up
into position.
Cleaning the milk system with
detergent
The milk system detergent was
developed specifically for this coffee
machine. It is available from Miele.
SELECT TYPE OF DRINK will appear in
the display.
^ Place a suitable container under the
main dispenser.
^ Put the detergent in a container with
approx. 5 oz. (150 mL) of lukewarm
water. Place the container beside the
coffee machine.
^ Press the OK button until MENU
appears in the display.
50
^ Place the milk tube into the container
when prompted to do so in the
display. Make sure that the milk tube
is sufficiently submerged in the
cleaning solution.
^ Follow the instructions given in the
display.
^ When PROGRAM FINISHED appears
in the display, press the OK button.
The milk system has been cleaned.
Cleaning and care
Cleaning the stainless steel
milk flask
(depending on the model)
The milk flask should be taken apart
and cleaned every day.
^ Clean all parts by hand only using
hot water and liquid dish soap. If
necessary, a small brush can be
used to remove any stubborn milk
deposits.
^ Rinse all parts carefully under
running water. Traces of dish soap
can affect the taste and quality of the
milk froth. Dry all parts thoroughly.
^ Reassemble the milk flask.
Water container
Change the water every day to prevent
a build-up of bacteria.
Make sure that the valve, the
underside of the water container and
the water container niche are clean.
Otherwise the water container will
not sit correctly.
^ The water container can be cleaned
in the dishwasher or by hand using
hot water and liquid dish soap. After
cleaning, dry the water container.
^ Clean the surface the water container
sits on, particularly the slots,
carefully.
51
Cleaning and care
Drip tray cover
^ Remove the drip tray cover from the
drip tray.
^ The drip tray cover can be cleaned in
the dishwasher or by hand using hot
water and liquid dish soap.
^ Dry the drip tray cover thoroughly
Drip tray and waste container
Clean the drip tray and waste
container every day every day to
avoid unpleasant smells and
mildew.
The waste container is located in the
drip tray.
The coffee machine will alert you via the
display when the drip tray and/or waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container then.
TIP If the coffee machine has just been
rinsed, wait a while before removing the
drip tray. Rinse water will run out of the
coffee dispensers.
^ Replace the cover onto the drip tray.
Ensure that the milk tube aperture is
on the left.
Drip tray
^ Push the coffee dispensers up as far
as they will go.
^ Remove the drip tray together with
the waste container by pulling the
drip tray forward.
^ Empty the drip tray and waste
container.
^ Clean the drip tray by hand using
warm water and liquid dish soap.
Clean the waste container, if
necessary (see "Waste container").
^ Dry the drip tray.
52
Cleaning and care
Waste container
Make sure that the metal contact
discs on the drip tray are cleaned
and dried properly. The discs will
not be able to detect that the drip
tray is full if they are dirty or damp.
The waste container will usually contain
some residual water from the rinsing
process
^ Push the coffee dispensers up as far
as they will go.
^ Clean the space under the drip tray.
^ Replace the waste container in the
drip tray and push the drip tray back
into the coffee machine.
Make sure the drip tray has been
pushed into its niche as far as it will
go.
^ Remove the drip tray together with
the waste container by pulling the
drip tray forward.
^ Empty the waste container and the
drip tray, if necessary. Used coffee
grounds should be disposed of with
organic waste or put on the compost
heap.
^ The waste container can be cleaned
in the dishwasher or by hand using
hot water and liquid dish soap. Clean
the drip tray, if necessary (see "Drip
tray").
^ Dry the waste container.
^ Replace the waste container in the
drip tray and push the drip tray back
into the coffee machine.
53
Cleaning and care
Bean container and ground
coffee chute
Disconnect the coffee machine from
the power supply before cleaning.
TIP Use a vacuum cleaner to remove
any dry coffee residues from the bean
container and the ground coffee chute.
Brew unit
Clean the brew unit by hand only
using hot water. Do not use soap.
The moving parts of the brew unit
are lubricated. Soap will damage the
brew unit.
Clean the brew unit once a week.
^ Open the lid on the right hand side of
the coffee machine. Remove the
coffee bean container lid.
Remove the brew unit and wash by
hand
^ Remove any coffee beans.
The brew unit can be removed for
cleaning.
^ Clean the bean container with a dry,
soft cloth.
The coffee bean container can now be
refilled.
^ Pull out the two flaps on the right
hand side of the coffee machine.
Turn the flaps 90° clockwise. Open
the door.
^ Replace the coffee bean container
lid.
If necessary, clean the ground coffee
chute:
^ Open the lid of the ground coffee
chute.
^ Remove any ground coffee.
^ Close the lid of the ground coffee
chute.
^ Close the lid on the right hand side of
the coffee machine.
54
^ Press the button on the end of the
handle of the brew unit a and while
doing so turn the handle
counterclockwise b.
Cleaning and care
^ Carefully pull the brew unit out of the
coffee machine.
To replace the brew unit, repeat the
previous steps in the reverse order:
If you cannot remove the brew unit
easily, the brew unit is not in the correct
position (see "Frequently asked
questions").
^ Push the brew unit back into the
coffee machine, making sure it is
straight.
After the brew unit has been
removed, do not alter the position of
the brew unit handle.
This would displace the brew unit
and it would not fit back into the
coffee machine.
^ Clean the brew unit by hand under
hot running water without soap.
^ Press the button on the end of the
handle of the brew unit a and while
doing so turn the handle clockwise
b.
^ Close the door. Turn the flaps 90°
counterclockwise. Lower the flaps.
^ Wipe any coffee from the two filters.
One filter is located in funnel a and
the other to the left of funnel b.
^ Dry funnel area a to prevent ground
coffee sticking to it.
^ Clean the inside of the coffee
machine Use your vacuum cleaner to
remove dry coffee grounds.
55
Cleaning and care
Cleaning the brew unit
Depending on the natural oil content of
the coffee used, the brew unit can
become blocked quite quickly. Use the
cleaning tablets supplied to clean the
brew unit.
These have been specially formulated
for use in the coffee maker to optimize
the degreasing. They are available
from Miele.
TIP Place a suitable container
underneath the coffee dispensers. Then
you don't have to empty the drip tray so
often.
When DROP CLEANING TAB IN
GROUND COFFEE CHUTE appears:
^ Open the lid on the right hand side of
the coffee machine.
After 200 portions have been
dispensed, CLEAN THE BREW UNIT
will appear in the display. This
message will be displayed until the
cleaning program has been carried out.
The cleaning process takes about
10 minutes.
It is important to degrease the brew
unit regularly.
^ Press the OK button until MENU
appears in the display.
^ Turn the rotary selector until
MAINTENANCE appears in the
display.
Press the OK button.
^ Select CLEAN THE BREW UNIT and
press the OK button.
^ Turn the rotary selector until START
appears in the display.
Press the OK button.
Follow the instructions about
degreasing the brew unit that appear in
the display.
56
^ Open the lid of ground coffee chute
a. Drop a cleaning tablet into
ground coffee chute b.
^ Close both lids.
^ Follow the instructions given in the
display.
^ When PROGRAM FINISHED appears
in the display, press the OK button.
The brew unit has now been
degreased.
Cleaning and care
Exterior
Remove any soiling promptly. The
surfaces can become discolored or
otherwise altered if soiling is not
removed right away.
Make sure that no water gets in
behind the display.
The exterior surfaces are
susceptible to scratching. Contact
with unsuitable cleaning agents
could cause discoloration.
Do not dry the mat surfaces of black
machines with a tea towel or similar.
The surface can become darker and
more shiny.
Ensure that any splashes during the
descaling process are wiped off immediately.
^ Turn the machine off using the On/Off
button -.
^ Clean the housing with a clean, soft
sponge and warm water and liquid
dish soap.
57
Descaling
Limescale builds up in the coffee
machine during use. The limescale
buildup in the machine will depend on
the hardness of your local water supply.
Limescale must be removed regularly.
The machine will guide you through the
descaling process. Various instructions
will appear in the display, e.g. you will
be prompted to empty the drip tray, fill
the water container, etc.
Descaling must be carried out. The
program takes approx. 30 minutes.
During the descaling program, water
containing descaling agent will run out
of the hot water spout. This is followed
by an activation period before a little
more descaling agent is dispensed.
The coffee system will remind you when
the descaling program needs to be
carried out. NO. PORTIONS UNTIL
DESCALING: 50 will appear in the
display. The remaining number of
drinks that can be made before
descaling will show in the display after
each drink is made.
^ Confirm the message with the
OK button.
When 0 is reached the coffee system
will lock. START THE DESCALING
PROGRAM will appear in the display.
You can turn the coffee machine off if
you do not want to run the descaling
program at this time. However, no more
drinks can be prepared until the
descaling program has been
completed.
58
If the coffee system is hot, it will need to
cool down for approx. 10 minutes
before the descaling program can
begin.
TIP Place a suitable container
underneath the coffee dispensers. Then
you don't have to empty the drip tray so
often.
Descaling following display
reminder
^ Press the OK button to start the
descaling program.
The descaling program cannot be
canceled once is has started. The
program has to be carried through
to the end.
Descaling solution
The descaling tablets supplied have
been specially formulated for use with
this coffee machine. More descaling
tablets are available from Miele.
You will need one descaling tablet to
descale the machine.
Only use the Miele descaling tablets
supplied. Other types of descaling
agents can damage the machine
and affect the taste.
^ Fill the water container to the "0.5 l"
mark with lukewarm water.
^ Place 1 descaling tablet in the water.
Descaling
Be sure to mix water and descaling
tablets in the right proportions. It is
important that you fill the water
container with enough water. Too
little water can cause the descaling
program to be stopped prematurely.
After descaling the machine carefully,
rinse the water container and the drip
tray to remove all traces of descaling
agent.
Selecting Descale from the
MAINTENANCE menu
^ Replace the water container in the
coffee machine.
^ Press the OK button until MENU
appears in the display.
Various messages will appear in the
display.
^ Turn the rotary selector until
MAINTENANCE appears in the
display.
Press the OK button.
^ Follow the instructions given.
When FILL WATER CONTAINER AND
PLACE IN MACHINE appears in the
display,
^ Rinse the water container carefully
with clean water. Be sure that no
descaling agent is left in the water
container. Fill the water container
with cold, clean tap water up to the
"max." mark.
PROGRAM FINISHED will appear in the
display when the descaling process
has been completed.
^ Press the OK button.
^ Empty the drip tray.
^ Select DESCALE and press the
OK button.
The following will appear in the display:
r
DESCALE
START
s
The descaling program cannot be
canceled once is has started. The
program has to be carried through
to the end.
^ Press the OK button.
The descaling process will begin.
The descaling program is now
complete and drinks can be prepared
in the machine again.
When descaling the machine be
sure to wipe away any splashes of
descaling agent immediately. These
could damage the surfaces.
59
Energy saving mode
Eco-Mode
Turning off
When using Eco Mode the coffee
system will save energy.
If the machine will not be used for an
extended period of time, turn it off using
the main switch at the back of the
machine.
The coffee system will switch to Eco
mode if it has not been used to prepare
a drink in some time. When in Eco
mode the heat function is not on
constantly, therefore reducing energy
usage.
The coffee system will heat up again
when a drink is selected.
Pre-warming the cups with hot water
If you only need to pre-heat cups
occasionally, the cup warming surface
can be turned off.
Hot water from the cappuccinatore can
be used to pre-heat the cups instead.
60
Frequently asked questions
,Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Do not open the outer casing of the coffee system.
You can easily resolve many of the minor problems yourself.
In some cases, an appropriate message appears in the display. To address the
fault, follow the instructions on the display.
Messages in the display
Message
Possible cause and solution
FAULT - 1
The coffee machine has overheated.
^ Turn the machine off with the On/Off - button. Wait
approx. one hour and then turn it on again.
FAULT - 2
FAULT - 82
^ If the fault still appears, contact Miele Technical Service.
FAULT - 28
There is too much ready ground coffee in the ground
coffee chute.
If more than one level scoop is put into the ground coffee
chute the brew unit cannot process it. The ground coffee
will be directed into the waste container, and a Fault will
appear in the display.
^ Turn the machine off with the On/Off - button. Wait
approx. 2 minutes and then turn it on again.
FAULT - 73
The brew unit cannot be positioned correctly.
^ Turn the coffee system off using the main switch at the
back of the machine. After a few seconds turn the coffee
system back on.
^ Press the . and / buttons at the same time. Then press
the OK button twice.
This will initialize the brew unit motor and put in back into
the start position.
^ If the fault message appears in the display again,
contact Miele Technical Service.
61
Frequently asked questions
Message
Possible cause and solution
FAULT - 74
^ Turn the machine off and then back on again.
If the fault message appears in the display again,
^ contact Miele Technical Service.
The following
appears in the
display, even
though the drip tray
is empty:
The drip tray is not seated correctly
EMPTY THE DRIP
The metal contacts are dirty.
^ Clean and dry the contacts.
TRAY
^ Push the drip tray into the coffee system into it clicks into
place.
or
or
^ The drip tray sensor is not working correctly.
^ Turn the coffee machine off and then n again with the
main switch.
^ If the fault still appears, contact Miele Technical Service.
Noises can be
heard from the
pump and the
display shows:
The coffee system is trying to draw in water, even though
the water tank is empty. Air is present in the pipework.
FILL WATER
SYSTEM FILLING UP - START will appear in the display.
CONTAINER AND
^ Press the OK button.
PLACE IN THE
MACHINE
62
^ Fill the water container with cold, fresh tap water.
Frequently asked questions
Message
Possible cause and solution
The following
appears in the
display although the
water container is
full:
The water tank is not seated correctly.
^ Remove the water container and then replace it.
If the fault message appears in the display again,
^ empty the water container.
FILL WATER
CONTAINER
AND PLACE IN
THE MACHINE
^ Check to see that the float moves freely, by shaking the
water container.
^ Fill the water container with fresh, cold tap water and
replace it in the coffee system.
If the fault still appears, contact Miele Technical Service.
Dispensing stops
and the following
appears in the
display:
There is not enough water in the water container.
PROCESS STOPPED
CONTINUE DISPENSING - YESB appears in the display.
WATER CONT. EMPTY
^ Fill the water container.
^ Press the OK button.
^ Press the OK button to continue dispensing,
or select NO to cancel the preparation.
63
Frequently asked questions
Message
Possible cause and solution
The message
The coffee machine needs descaling and/or the brew
unit filters are blocked.
SYSTEM
FILLING UP - START
appears in the display
again.
^ Turn the machine off with the On/Off - button.
^ Press the OK button for 2 seconds and call up
MAINTENANCE - DESCALE.
^ Descale the coffee machine.
^ Remove the brew unit and rinse it under running
water (see "Brew unit").
If the fault message appears in the display again,
^ Degrease the brew unit (see "Cleaning the brew
unit").
If the fault still appears in the display, contact Miele
Technical Service.
The following message is The milk system was not rinsed prior to turning off last
displayed after turning
time.
on:
^ Rinse the milk system (see "Rinsing the milk
system").
RINSE THE
MILK SYSTEM
CLEAN THE MILK
SYSTEM
appears in the display.
The milk system needs to be cleaned.
^ Confirm this message by pressing the OK button.
^ Clean the milk system (see "Cleaning the milk
system").
DEMO MODE IS ACTIVE
or
DEMO MODE ACTIVE
FUNCTION DEACTIVATED
appears in the display.
64
The demo setting of the coffee machine for
showrooms or dealers has been activated.
^ Deactivate the demo mode (see "Demo mode").
Frequently asked questions
Unsatisfactory results
Problem
Possible cause and solution
Water is dispensed
from the coffee
dispensers when
coffee has been
selected.
The ground coffee chute lid was opened and closed
without coffee being put into it. YES was then selected
when the GROUND COFFEE option appeared in the
display.
^ If ground coffee has not been added to the ground
coffee chute, NO must be selected when prompted to
use GROUND COFFEE.
or
Coffee beans have become stuck in the grinder
^ Turn the coffee machine off with the main switch.
^ Remove all coffee beans from the bean container. Use a
vacuum cleaner if necessary.
^ Add fresh coffee beans. Prepare a coffee drink.
Espresso or coffee
flows into the cup
too quickly.
The grind level is too coarse.
^ Set the grinder control to a finer setting (see "Adjusting
the grinder setting").
Espresso or coffee The grind level is too fine.
flows too slowly into ^ Set the grinder control to a coarser setting (see
the cup.
"Adjusting the grinder setting").
65
Frequently asked questions
Problem
Possible cause and solution
The coffee or
espresso is not hot
enough
The cup has not been pre-heated.
^ Pre-heat the cups (see "Pre-warming cups").
or
The brewing temperature is set too low.
^ Set a higher brew temperature (see "Brewing
temperature").
or
The brew unit filters are blocked.
^ Clean the brew unit (see "Brew unit").
^ Degrease the brew unit (see "Cleaning the brew unit").
The crema on the
coffee or espresso
is "not right".
The grinder is not set correctly.
^ Set the grinder control to a coarser or finer setting (see
"Adjusting the grinder setting").
or
The brew temperature is too high for the type of coffee
being used.
^ Set a lower brew temperature (see "Brewing
temperature").
or
The coffee beans are no longer fresh.
^ Add fresh beans to the coffee bean container.
or
The coffee dispensers are too high.
^ Pull the dispensers down until they are at the same
height as the cup rim.
66
Frequently asked questions
Unusual performance of the coffee machine
Problem
Possible cause and solution
The brew unit filters are blocked.
When a drink is
selected very little or
^ Clean the brew unit (see "Brew unit").
nothing at all is
dispensed from the ^ Degrease the brew unit (see "Cleaning the brew unit").
coffee dispensers.
Water has stopped
flowing when
programming the
amount.
The maximum water quantity possible was reached.
Preparation is stopped and the max. portion size possible
is saved.
or
There was not enough water in the water tank. The
programming process is canceled and the setting will not
be saved
^ Fill the water container.
^ Repeat the programming procedure.
The coffee machine This is not a fault.
does not rinse itself
If the coffee machine still has an operating temperature
when turned on.
higher than 140 °F (60°C), rinsing will not take place.
There is a lot of
"coffee water" in the
waste container.
The grind level is too coarse.
^ Set the grinder control to a finer setting (see "Adjusting
the grinder setting").
^ Adjust the amount of coffee, if necessary (see "Adjusting
the strength of the coffee").
67
Frequently asked questions
Problem
Possible cause and solution
When the coffee
The main switch is turned off ("0").
system is turned on
^ Set the main switch to on ("I").
using the - button the
display remains dark. or
The machine is not properly plugged into the outlet.
^ Insert the plug into the electrical outlet.
or
The circuit breaker has tripped due to a problem with the
coffee machine, the electricity supply or another
machine.
^ Remove the power plug from the electrical outlet.
^ Contact a qualified electrician or Miele Technical service for assistance.
The display lights up The demo setting of the coffee machine for showrooms
or dealers has been activated.
but the coffee
machine does not
^ Deactivate the demo mode (see "Demo mode").
heat up and no drinks
are prepared.
The coffee machine
cannot be turned off
with the On/Off button
-.
The coffee machine
turns off suddenly.
The programmed turn off time has been reached.
^ If desired set a new turn off time (see "Timer").
or
The machine is not properly plugged into the outlet.
^ Insert the plug into the electrical outlet.
68
Frequently asked questions
Problem
Possible cause and solution
The coffee machine
does not turn on at
the programmed and
activated "Switch on
at" time.
The system lock is activated.
^ Deactivate the system lock. See "System lock".
or
The coffee system was not used after being turned on
three times in a row automatically.
^ Turn the machine on and prepare a drink.
or
Eco mode is activated. The timer function is not available
in this mode.
^ Select Comfort mode (see "Operating modes").
The grinder is louder
than usual.
The beans could contain stones.
^ Turn the machine off immediately.
^ Contact Technical Service.
or
The coffee bean container has become empty during the
grinding process.
^ Fill the coffee bean container with fresh beans.
The control is blocked.
The grinder setting
control will not move.
^ Prepare a coffee drink.
^ Reset the grinder setting while grinding is in progress.
Milk is dripping out of The level of milk in the milk flask is higher than the
cappuccinatore.
the cappuccinatore
even though no milk
^ Push the coffee dispensers up as far as they will go.
is being dispensed.
^ Use a smaller milk flask if necessary.
69
Frequently asked questions
Problem
Possible cause and solution
The brew unit cannot
be removed,
or
the brew unit cannot be
replaced in the coffee
system
The brew unit or the brew unit motor is not in the correct
position. This can happen if the brew unit or the drip
tray is pulled out while brewing is taking place.
^ Turn the machine off with the On/Off - button.
^ Press the . and / buttons at the same time. Then
press the OK button twice.
This will initialize the brew unit motor and put in back
into the start position.
If the brew unit still cannot be removed or replaced in
the machine,
^ Contact Miele Technical Service.
The descaling program The descaling program cannot be canceled once the
was started
OK button has been pressed.
unintentionally.
The process must run through to completion. This is a
safety measure to ensure that the machine is fully
descaled. It is important for the long-term protection of
the machine and to ensure that it functions properly.
^ Complete the descaling program (see "Descaling".)
Loud noises are heard
during the descaling
program.
This is not a fault.
These noises occur when water is flushed through the
machine at a high pressure.
The heating-up time is The coffee machine needs to be descaled.
longer than usual, the ^ Complete the descaling program (see "Descaling".)
amount of water being
dispensed is not right
and the coffee machine
is not performing
correctly.
70
After sales service
Repairs
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department by phone
number at the back of this booklet.
^ Please quote the model type and
number of your appliance.
These can be found on the data plate
located behind the drip tray inside the
coffee system.
71
Accessories
The following accessories are included
with your coffee system depending on
the model:
– Measuring spoon
for ground coffee
– Integrated cappuccinatore
as a spare part
– Cleaning tablets
to clean/degrease the brew unit
– Descaling tablets
for descaling the water pipework
– Test strips
to determine the water hardness
level
– Cleaning
brush for cleaning the milk tube
– Milk flask
for storing and keeping milk cool
longer
These products and other useful
accessories can be ordered on the
Internet at www.mieleusa.com.
72
Transport
If the coffee machine will not be used
for an extended period of time, e.g.
vacation, or will be transported over a
long distance, the machine should be
prepared as follows.
Caution! Danger of scalding and
burns. Hot steam will escape from
the cappuccinatore.
Please note:
The evaporation process is complete
when the message goes out.
– Empty and clean the coffee bean
container
^ Turn the machine off using the main
switch
– Empty and clean the water container
– Evaporating the coffee machine
^ Clean the drip tray and waste
container.
– Clean the drip tray and waste
container
The coffee machine is now ready to be
packed.
– Pack the machine securely
Evaporating the coffee
machine
The coffee machine should be
evaporated before it is stored for a long
period of time or transported any
distance - particularly at temperatures
below freezing.
Evaporating the machine will remove all
traces of water from the system. This
prevents water and frost damage.
^ Turn the machine off with the On/Off
- button.
^ Empty the water container.
TIP Place a suitable container
underneath the hot water spout.
^ Press the OK button.
When you are ready to use the
coffee system again it will need to
be filled with water (see "First steps
to use").
Packing
Only pack the machine in a clean,
dry environment.
Residue of coffee grounds can
cause scratches on surfaces.
Coffee, milk and water residues can
cause bacteria build-up.
Use the original packaging including
Styrofoam to pack the coffee system.
Keep the Operating Instructions in the
box for future reference. That way they
are available when the coffee machine
is used again.
^ Then press the k button twice.
The evaporation process starts, the
coffee machine heats up and DRAIN
THE SYSTEM appears in the display.
73
74
Installation instructions
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
Electrical connection
All electrical work should be
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous.
Verify that the voltage, load and circuit
rating information found on the data
plate match the household electrical
supply. This data must match to
prevent damage to the coffee system. If
in doubt, consult a licensed electrician.
The data plate can be found behind the
drip tray inside the coffee system.
The plug will fit in the outlet only one
way. If it does not fit, DO NOT use force
and DO NOT modify the plug in any
way. Contact a qualified electrician.
The socket should be located next to
the machine and be easily accessible.
If the appliance is connected to the
electrical supply with an extension cord
please note:
– A short power-supply cord is to be
provided to reduce risks resulting
from becoming entangled in or
tripping over a longer cord.
– Always use care and exercise
caution with using an extension cord.
– The marked electrical rating of the
extension cord should be at least as
great as the electrical rating of the
appliance.
– The extension cord should be a
grounding-type 3-wire cord.
76
– A longer cord should be arranged so
that it will not drape over the counter
top or table top where it can be
pulled on by children or tripped over.
Do not connect the appliance to a
power inverter or directly to power
produced outside of the normal
electrical grid (i.e. direct solar or wind
power source).
Direct connection to such power
sources can cause power surges and
tripped breakers when the appliance is
turned on, and could damage the
appliance.
Do not connect the appliance to energy
saving plugs or outlets. The reduction
of power to the appliance caused by
these devices will cause the appliance
to run hot and may damage it and/or
shorten its usable life.
Do not operate any appliance with a
damaged cord or plug. Contact Miele
Technical Service.
If there is any question concerning
the electrical connection of this
appliance to your power supply,
please consult a licensed electrician
or contact Miele’s Technical Service
Department. See back page for
contact information.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Installation
Danger of overheating!
Ensure that there is sufficient
ventilation around the coffee system.
Be sure the vents at the top of the
machine are not covered
completely.
Danger of overheating. If the coffee
system is installed behind a cabinet
door, it may only be used with the
door open. Do not close the cabinet
door while the coffee system is in
use.
If the coffee machine is installed in a
niche, the minimum dimensions of the
niche are:
Height
20" (508 mm)
Width
17 11/16" (450 mm)
Depth
21 7/8" (555 mm)
^ Position the coffee machine so that
the front edge lines up with the front
edge of the niche.
– Install the coffee system in a dry, well
ventilated room.
– The ambient temperature should be
between 50°F (10°C) and 90°F
(32°C).
– The coffee machine should be
installed on a water resistant,
horizontal surface.
– Be sure the vents at the top of the
machine are not covered completely,
e.g. with a dish towel.
77
Dimensions
78
Caring for the environment
Disposal of packing material
Disposal of an old appliance
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Please recycle.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
The original packaging can be used
to transport the coffee system.
79
Alteration rights reserved / 1512
M.-Nr. 09 319 110 / 00
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.