HT-C450
HT-C453
HT-C455
Digital Home
Cinema System
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Downloaded From TheatreSystem-Manual.com Manuals
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION : TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
WARNING
~ To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
~ Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
~ The Mains plug is used as a disconnect device and shall
stay readily operable at any time.
~ This apparatus shall always be connected to a AC outlet
with a protective grounding connection.
~ To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION
~ INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Downloaded From TheatreSystem-Manual.com Manuals
English
This symbol indicates important
instructions accompanying the
product.
Precautions
~ Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product.
~ Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm).
~ Do not place the product on amplifiers or other equipment which may become hot.
Make sure the ventilation slots are not covered.
~ Do not stack anything on top of the product.
~ Before moving the product, ensure the Disc Insert Hole is empty.
~ In order to disconnect the product completely from the power supply, remove the AC plug from the wall outlet, especially when left
unused for a long period of time.
~ During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the
product.
~ Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and malfunction of the
product.
~ Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric fields (i.e.
speakers.).
~ Disconnect the power cable from the AC supply if the product malfunctions.
~ Your product is not intended for industrial use. Use of this product is for personal use only.
~ Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during
the winter, wait approximately 2 hours until the product has reached room temperature before using.
~ The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.
Accessories
Check for the supplied accessories below.
Video Cable
FM Antenna
HDMI Cable (Option)
User's Manual
FUNCTION
TV SOURCE
POWER
DVD RECEIVER/TV
SLEEP
ECHO
1
2
4
5
7
8
3
6
9
DSP /EQ
0
VOL
DISC MENU
MUTE
MIC VOL+
REPEAT
TUNING
/CH
MIC VOLTITLE MENU
MENU
TOOLS
INFO
RETURN
A
DIMMER
EXIT
TUNER MEMORY
MO/ST
B
C
S . VOL
CD RIPPING
D
AUDIO UPSCALE
P .BASS
Remote Control/Batteries (AAA size)
Downloaded From TheatreSystem-Manual.com Manuals
English
Safety Information
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and
picture quality or cause skipping.
Be especially careful not to scratch discs when
handling them.
Holding discs
~ Do not touch the playback side of the disc.
~ Hold the disc by the edges so that fingerprints will not get
on the surface.
~ Do not stick paper or tape on the disc.
Disc Storage
~ Do not keep in direct sunlight
~ Keep in a cool ventilated area
~ Keep in a clean Protection jacket.
Store vertically.
Licence
~ ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX,Inc. This is an official DivX Certified
device that plays DivX video. Visit www.divx.com for more
information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play DivX Video-on-Demand (VOD) content. To
generate the registration code, locate the DivX VOD section in the device
setup menu. Go to vod.divx.com with this code to complete the
registration process and learn more about DivX VOD.
~ DivX Certified® to play DivX ® video
~ Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
~ “Pat. 7,295,673; 7,460,688; 7,519,274”
Copyright
© 2010 Samsung Electronics Co., Ltd. All rights
reserved.
Copy Protection
✎ NOTE
`
`
Do not allow the discs to become contaminated with dirt.
Do not load cracked or scratched discs.
Handling and Storing Discs
If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.
~ When cleaning, wipe gently from the inside to the
outside of the disc
✎ NOTE
`
~ M
any DVD discs are encoded with copy protection. Because of this,
you should only connect your product directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted picture from copyprotected DVD discs.
~ This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by Rovi
Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
Condensation may form if warm air comes into contact
with cold parts inside the product. When condensation
forms inside the product, it may not operate correctly. If
this occurs, remove the disc and let the product stand
for 1 or 2 hours with the power on.
Downloaded From TheatreSystem-Manual.com Manuals
English
Contents
Safety Information
Safety Warnings
Precautions
Accessories
Cautions on Handling and Storing Discs
Licence
Copyright
Copy Protection
Getting Started
7
7
11
11
12
13
Icons that will be used in manual
Disc Types and Characteristics
Description
Front Panel
Rear Panel
Remote control
CONNECTIONS
15
18
20
21
Connecting the Speakers
Connecting the Video Out to your TV
Connecting the FM Antenna
Connecting Audio from External Components
Setup
22
22
23
23
23
23
23
24
24
25
25
25
26
26
26
26
26
26
26
26
26
26
Before Starting (Initial Setting)
Setting the Setup menu
Display
TV Aspect
BD Wise
Resolution
HDMI Format
Audio
Speaker Setting
DRC (Dynamic Range Compression)
AV-SYNC
HDMI AUDIO
EQ Optimizer
System
Initial Setting
DivX(R) Registration
Language
Security
Parental Rating
Change Password
Support
Product Information
2
7
15
22
Downloaded From TheatreSystem-Manual.com Manuals
ENGLISH
2
3
3
4
4
4
4
English
Contents
Basic Functions
27
27
27
28
28
32
34
34
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
JPEG File Playback
Using the Playback Function
Sound Mode
Listening to Radio
Connecting Microphone
Advanced Functions
35
35
USB Function
CD Ripping
Other Information
36
37
38
Troubleshooting
Country code list
Specifications
35
36
~ Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Downloaded From TheatreSystem-Manual.com Manuals
English
01
Getting Started
Make sure to check the following terms before
reading the user manual.
Icon
B
A
Term
Definition
DVD
This involves a function
available with DVD-Video or
DVD±R/±RW discs that
have been recorded and
finalised in Video Mode.
CD
This involves a function
available with a data CD
(CD DA, CD-R/-RW).
MP3
This involves a function
available with CD-R/-RW
discs.
G
JPEG
This involves a function
available with CD-R/-RW
discs.
D
DivX
This involves a function
available with MPEG4 discs.
(DVD±R/±RW, CD-R/-RW)
!
✎
CAUTION
Disc Types and Characteristics
Region Code
The product and the discs are coded by region. These
regional codes must match in order for the disc to play. If the
codes do not match, the disc will not play.
Disc Type
DVD-VIDEO
This involves a case where a
function does not operate or
settings may be cancelled.
NOTE
This involves tips or instructions
on the page that help each
function operate.
Shortcut
Key
This function provides direct and
easy access pressing the button
on the remote control.
Downloaded From TheatreSystem-Manual.com Manuals
Region
Code
Area
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
English
Getting Started
Icons that will be used in manual
Getting Started
Disc types that can be played
Disc Types &
Mark (Logo)
Recorded
Signals
Disc
Size
12 cm
VIDEO
DVD-VIDEO
8 cm
AUDIO
AUDIO-CD
AUDIO
+
DivX
VIDEO
Max. Playing Time
Approx. 240 min.
(single-sided)
Approx. 480 min.
(double-sided)
Approx. 80 min.
(single-sided)
Approx. 160 min.
(double-sided)
12 cm
74 min.
8 cm
20 min.
12 cm
-
8 cm
-
Do not use the following types of discs!
~ L D, CD-G, CD-I, CD-ROM, DVD-ROM and
DVD-RAM discs cannot be played on this product.
If such discs are played, a <WRONG DISC
FORMAT> message appears on the TV screen.
~ DVD discs purchased abroad may not play on this
product.
If such discs are played, a <Wrong Region. Please
check Disc.> message appears on the TV screen.
Disc Types And Disc Format
This product does not support Secure (DRM) Media files.
CD-R Discs
~ Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
~ Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minutes as
they may not be played back.
~ Some CD-RW (Rewritable) media, may not be playable.
~ Only CD-Rs that are properly "closed" can be fully
played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R MP3 Discs
~ Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
~ MP3 file names should contain no blank spaces
or special characters (. / = +).
~ Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
~ Only files with the ".mp3" and ".MP3" extensions
can be played.
~ Only a consecutively written multisession disc can
be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
~ If the disc is not closed, it will take longer to begin
playback and not all of the recorded files may be played.
~ For files encoded in Variable Bit Rate (VBR)
format, i.e. files encoded in both low bit rate and
high bit rate (e.g., 32Kbps ~ 320Kbps), the
sound may skip during playback.
~ A maximum of 500 tracks can be played per CD.
~ A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
~ Only files with the "jpg" extensions can be played.
~ If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
~ Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
~ JPEG file names should be 8 characters or less in
length and contain no blank spaces or special
characters (. / = +).
~ Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
~ A maximum of 999 images can be stored on a folder.
~ When playing a Kodak/Fuji Picture CD, only the JPEG
files in the picture folder can be played.
~ Picture discs other than Kodak/Fuji Picture CDs may
take longer to start playing or may not play at all.
Downloaded From TheatreSystem-Manual.com Manuals
English
01
~ Software updates for incompatible formats are not
supported.
(Example : QPEL, GMC, resolutions higher than
800 x 600 pixels, etc.)
~ If a DVD-R/-RW disc has not been recorded
properly in DVD Video format, it will not be
playable.
~ When you play a disc whose sampling frequency is
higher than 48khz or 320kbps, you may experience
shaking on the screen during playback.
~ Sections with a high frame rate might not be played
while playing a DivX file.
~ Since this product only provides encoding formats
authorized by DivX Networks, Inc., a DivX file
created by the user might not play.
USB Host Specification
DivX (Digital internet video express)
DivX is a video file format developed by Microsoft and is
based on MPEG4 compression technology to provide
audio and video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio
encoding, enabling to watch a movie at near
DVD-quality video and audio.
Supported Formats (DivX)
This product only supports the following media formats.
If both video and audio formats are not supported, the
user may experience problems such as broken images
or no sound.
Supported Video Formats
Format
AVI
WMV
Supported Versions
DivX3.11~DivX5.1, XviD
V1/V2/V3/V7
Bit Rate
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type
cable.
• Supports UMS (USB Mass Storage Device) V1.0
compliant devices.
• Supports devices with drives formatted in the
FAT(FAT, FAT16, FAT32)file system.
Non-compliance
• Does not support a device that requires installing a
separate driver on a PC (Windows).
• Does not support connection to a USB hub.
• A USB device that is connected using a USB
extension cable may not be recognized.
• A USB device requiring a separate power source
needs to be connected to the product with the
separate power connection.
Operational Limitations
Supported Audio Formats
Format
USB Host Specification
Sampling
Frequency
MP3
80~320kbps
WMA
56~128kbps
AC3
128~384kbps
44.1/48khz
DTS
1.5Mbps
44.1khz
44.1khz
• If the connected device has multiple drives (or
partitions) installed, only one drive (or partition) can be
connected.
• A device supporting USB 1.1 alone may cause a
difference in the picture quality, depending on the
device.
~ DivX files, including audio and video files, created in
the DTS format can only support up to 6Mbps.
~ Aspect Ratio : Although the default DivX resolution is
640x480 pixels, this product supports up to
720x480 pixels. TV screen resolutions higher than
800 will not be supported.
Downloaded From TheatreSystem-Manual.com Manuals
English
Getting Started
DVD±R/±RW, CD-R/RW Discs
Getting Started
USB Devices that can be used with the
product
~ USB Storage Device, MP3 Player, Digital Camera
~ Removable HDD
- Removable HDDs equipped with less than 160
Gbytes are supported. Removable HDDs
equipped with 160Gbytes or more may not be
recognized, depending on the device.
- If the connected device does not work due to
insufficient power supply, you can use a
separate power cable to supply power so that it
can work properly. The connector of the USB
cable may differ, depending on the manufacturer
of the USB device.
~ Some MP3 players, when connected to this product,
may not operate depending on the sector size of their
file system.
~ The USB host function is not supported if a product
that transfers media files by its manufacturer specific
program is connected.
~ Does not operate with Janus enabled MTP (Media
Transfer Protocol) devices.
~ The USB host function of this product does not
support all USB devices.
~ USB card Reader: One slot USB card reader and
Multi slot USB card reader.
- The USB card reader may not be supported,
depending on the manufacturer.
- If you install multiple memory devices into a multi
card reader, you may experience problems.
Supported file Formats
Format
Still
Picture
File name
JPG
MP3
WMA
WMV
DivX
File
extension
JPG
.JPEG
.MP3
.WMA
.WMV
.AVI
Bit rate
–
80~320
kbps
56~128
kbps
4Mbps
4Mbps
Version
–
–
V8
V1,V2,
V3,V7
DivX3.11~
DivX5.1,
XviD
Pixel
640x480
–
–
720x480
Sampling
Frequency
–
44.1kHz
44.1kHz
44.1KHz~ 48KHz
Music
Movie
~ CBI (Control/Bulk/Interrupt) is not supported.
~ Digital Cameras that use PTP protocol or require
additional program installation when connected to a
PC are not supported.
~ A device using NTFS file system is not supported.
(The system supports only the FAT file system and
will not play a movie larger than 1 GB in USB mode.)
10
Downloaded From TheatreSystem-Manual.com Manuals
English
01
Getting Started
Description
Front Panel
MIC 1
1
2
MIC 2
3 4 5 6 7 8 9
MIC 1
10
11 12
MIC 2
13
1
DISC TRAY
Insert disc here.
2
DISPLAY
Displays the playing status, time, etc.
3
REMOTE CONTROL SENSOR
Detects signals from the remote control.
4
OPEN/CLOSE BUTTON (
)
Opens and closes the disc tray.
5
FUNCTION BUTTON (
)
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
6
TUNING DOWN & SKIP BUTTON (
7
STOP BUTTON (
8
PLAY/PAUSE BUTTON (
9
TUNING UP & SKIP BUTTON (
10
VOLUME CONTROL BUTTON (
11
POWER BUTTON (
12
USB PORT
Connect here and play files from external USB storage devices such as
MP3 players, USB flash memory, etc.
13
MIC 1,2 jack
Connect up to two microphones.
)
)
Goes back to the previous title/chapter/track.
Tunes down the FM frequency band.
Stops disc playback.
)
)
Plays a disc or pauses playback.
Goes to the next title/chapter/track.
Tunes up the FM frequency band.
)
,
)
Volume adjustment.
Turns the product on and off.
Downloaded From TheatreSystem-Manual.com Manuals
English
11
Getting Started
Rear Panel
1
2
3 4
5
6
FM ANT.
VIDEO
OUT
DIGITAL
AUDIO IN
7
HDMI OUT
OPTICAL
AUX IN
1
2
5.1 CHANNEL SPEAKER OUTPUT
CONNECTORS
EXTERNAL DIGITAL OPTICAL IN JACK
(DIGITAL AUDIO IN)
COMPONENT
OUT
Connect the front, Centre,surround speakers and subwoofer.
Use this to connect external equipment capable of digital output.
3
HDMI OUT JACK
Using an HDMI cable, connect this HDMI output jack to the HDMI input jack
on your TV for the best quality picture.
4
AUX IN JACKS
Connect to the 2CH Analogue output of an external device (such as a VCR).
5
VIDEO OUT JACK
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
6
COMPONENT VIDEO OUTPUT JACKS
Connect a TV with Component video inputs to these jacks.
7
FM ANTENA JACK
Connect the FM antenna.
12
Downloaded From TheatreSystem-Manual.com Manuals
English
01
Getting Started
Remote control
Tour of the Remote Control
POWER
FUNCTION
TV SOURCE
DVD RECEIVER/TV
SLEEP
This is mode selection button.
or
Press to select TV's video mode.
Turn the product on and off.
Press to select DVD RECEIVER/TV
mode.
Press the number button to operate options.
ECHO
1
2
3
4
5
6
7
8
9
DSP /EQ
Select the desired Dolby Pro Logic II audio
mode.
0
Press to stop/play a disc.
MUTE
MIC VOL+
REPEAT
TUNING
/CH
Adjust the volume.
VOL
DISC MENU
MIC VOLTITLE MENU
MENU
Press to check the disc menu.
Allow access to common functions
of the product such as the Photo List.
or
GREEN(B) : Press to preset FM stations.
TUNING/CH:Search for active FM
stations and change
channels.
MIC VOL :Adjust the MIC volume.
Allows you to repeat a title,
chapter, track or disc.
Use this to enter the Title menu.
TOOLS
INFO
RETURN
EXIT
Select on-screen menu items and
change menu value.
Return to the previous menu.
Select the desired DSP/EQ audio
mode.
Press to pause a disc.
Cut off the sound temporarily.
Used to change the audio/subtitle
language, angle etc.
SLEEP :Set the time to shut off
the product itself.
ECHO :Adjust the echo level of
the microphone.
Press to search backwards
or forwards.
Press to skip backwards or forwards.
Press this to move to the home
menu.
To open and close the disc tray.
Display current disc (file) status.
Exit the menu.
A
DIMMER
TUNER MEMORY
MO/ST
CD RIPPING
B
C
D
S . VOL
Adjust the brightness of Display.
Regulate and stabilize the
volume level against a
drastic volume change.
Downloaded From TheatreSystem-Manual.com Manuals
AUDIO UPSCALE
P .BASS
Allow access to common functions
of the product such as the Photo List.
or
YELLOW(C) : S elect MONO or STEREO
for radio broadcasting.
BLUE(D) : Converts audio sound of the
CD into a MP3 file format.
Select the desired P.BASS or
MP3 ENHANCEMENT mode.
English
13
Getting Started
Installing batteries in the Remote
Control
* Battery size: AAA
TV Brand Code List
Brand
Code
Brand
56, 57, 58
MTC
18
01, 15
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11,
12, 13, 14
01, 18, 40, 48
NEC
18, 19, 20, 40, 59, 60
Nikei
03
Onking
03
57, 58, 81
Onwa
Brocsonic
59, 60
Panasonic
Penney
Admiral
(M.Wards)
A Mark
Anam
AOC
Bell & Howell
(M.Wards)
✎ NOTE
`
`
`
`
Place batteries in the remote control so they match
the polarity : (+) to (+) and (–) to (–).
Always replace both batteries at the same time.
Do not expose the batteries to heat or flame.
The remote control can be used up to approximately
7 meters in a straight line.
Setting the Remote Control
You can control certain functions of your TV with this
remote control.
When operating a TV with the remote control
1. Press the DVD RECEIVER/TV button to set the
remote control to TV mode.
2. Press the POWER button to turn on the TV.
3. While holding down the POWER button, enter
the code corresponding to your brand of TV.
~ If there is more than one code listed for your
TV in the table, enter one at a time to
determine which code works.
~ Example : For a Samsung TV
While holding down the POWER button, use the
number buttons to enter 00, 15, 16, 17 and 40.
4. If the TV turns off, the setting is complete.
~ You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
✎ NOTE
`
`
The remote control may not work or some operations
may not be possible with some brands of TVs.
The remote control will work on a Samsung TV by
default.
14
03
Candle
18
Cetronic
03
Philco
Citizen
03, 18, 25
Philips
Cinema
97
Pioneer
06, 07, 08, 09, 54, 66,
67, 73, 74
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48,
54, 62, 72
63, 66, 80, 91
Classic
03
Portland
15, 18, 59
Concerto
18
Proton
40
Contec
46
Quasar
06, 66, 67
Coronado
15
03, 05, 61, 82, 83, 84
Radio Shack
RCA/
17, 48, 56, 60, 61, 75
Craig
Croslex
62
Proscan
Realistic
Crown
03
Sampo
Curtis Mates
59, 61, 63
Samsung
CXC
Sanyo
Scott
03, 40, 60, 61
Daytron
03
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
40
40
00, 15, 16, 17, 40, 43, 46,
47, 48, 49,
19, 61, 65
Sears
15, 18, 19
Dynasty
03
15, 57, 64
Emerson
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
Fisher
19, 65
Sharp
Signature
2000
(M.Wards)
Sony
50, 51, 52, 53, 55
Daewoo
18, 59, 67, 76, 77, 78,
92, 93, 94
03, 19
57, 58
Funai
03
Soundesign
03, 40
Futuretech
General
Electric (GE)
03
06, 40, 56, 59, 66,
67, 68
Spectricon
01
Hall Mark
40
Sylvania
Hitachi
15, 18, 50, 59, 69
Symphonic
18, 40, 48, 54, 59,
60, 62
61, 95, 96
Inkel
45
Tatung
06
JC Penny
56, 59, 67, 86
Techwood
18
JVC
70
Teknika
03, 15, 18, 25
SSS
18
KTV
59, 61, 87, 88
TMK
18, 40
KEC
03, 15, 40
Toshiba
19, 57, 63, 71
KMC
15
01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44
Vidtech
18
Videch
59, 60, 69
18
Wards
15, 17, 18, 40, 48,
54, 60, 64
Yamaha
18
York
40
LG (Goldstar)
Luxman
Marantz
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
40, 54
Yupiteru
03
Matsui
54
Zenith
58, 79
LXI (Sears)
Magnavox
MGA
Mitsubishi/
MGA
Downloaded From TheatreSystem-Manual.com Manuals
English
Code
18, 40
Zonda
01
18, 40, 59, 60, 75
Dongyang
03, 54
02
Connections
Connections
This section involves various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
SW
Place it on a stand or cabinet shelf, or under the
TV stand.
Selecting the Listening Position
The listening position should be located about 2.5
to 3 times the distance of the TV's screen size
away from the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m
Front Speakers ei
Centre Speaker
f
hj
Rear Speakers
Subwoofer
g
Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the speakers so that their tweeters will be at the same height
as your ear. Align the front face of the front speakers with the front face of the
centre speaker or place them slightly in front of the centre speakers.
It is best to install it at the same height as the front speakers. You can also install it
directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Place them about 60 to
90cm above your ear, facing slightly downward.
Unlike the front and centre speakers, the rear speakers are used to handle
* mainly
sound effects and sound will not come from them all the time.
The position of the subwoofer is not so critical. Place it anywhere you like.
! CAUTION
`
`
`
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
`
Do not hang the subwoofer on the wall through the duct (hole).
When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is correct.
Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien
substances into the duct (hole) of the subwoofer.
✎ NOTE
`
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set.
Downloaded From TheatreSystem-Manual.com Manuals
English
15
Connections
Connecting the Speakers
Speaker Components
HT-C450
(L)
(R)
(L)
FRONT
(R)
CENTRE
REAR
Speaker Components
SUBWOOFER
SPEAKERCABLE
Assembled Speakers
HT-C453
HT-C453
(L) (R)
SCREW (Large): 2EA
SCREW (Small): 8EA
CENTRE SPEAKER
FRONT
(L)
STAND
(R)
REAR
CENTRE

SPEAKER
STANDBASE SUBWOOFER CABLE
FRONT
SPEAKER
HT-C455
REAR
SPEAKER
SUBWOOFER
HT-C455
(L) (R)
SCREW (Large): 4EA
SCREW (Small): 16EA
FRONT
STAND
(L) (R)
CENTRE
REAR
CENTRE SPEAKER
STANDBASE
SUBWOOFER

FRONT/REAR SPEAKER
SPEAKERCABLE
✎ NOTE
` Refer to page 17 to install the Speakers on the Tallboy Stand.
1
Downloaded From TheatreSystem-Manual.com Manuals
English
SUBWOOFER
02
Connections
Installing the Speakers on the Tallboy Stand
* HT-C453 only - Front Speakers
1
* HT-C455 only - Front/Rear Speakers
2
1. Turn the Stand Base upside-down and connect
it to the Stand.
2. Insert four small screws clockwise into the four holes
marked using a screwdriver as shown in the
illustration.
Stand
Base
Stand
3
4
Speaker
3. Connect the upper Speaker to the assembled Stand.
4. Insert another large screw clockwise into the hole
on the rear of the speaker using a screwdriver.
Stand
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
Black
Red
In case of HT-C450
Centre Speaker
Front Speaker (R)
Front Speaker (L)
VIDEO
OUT
DIGITAL
AUDIO IN
FM ANT .
HDMI OUT
OPTICAL
AUX IN
Rear Speaker (R)
COMPONENT
OUT
Rear Speaker (L)
Subwoofer
* Refer to page 16 for the speakers of HT-C453/C455.
Downloaded From TheatreSystem-Manual.com Manuals
English
1
Connections
Connecting the video out to your tv
Choose one of the three methods for connecting to a TV.
METHOD 3 (Option)
Green
VIDEO
OUT
DIGITAL
AUDIO IN
FM ANT.
Blue
HDMI OUT
OPTICAL
Red
AUX IN
COMPONENT
OUT
METHOD 2
METHOD 1 (Option)
METHOD 1 : HDMI
Connect an HDMI cable (Option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on
your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied)
from the COMPONENT OUT (Pr, Pb and Y) jacks on the back of the product to the Component Video Input
jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
1
Downloaded From TheatreSystem-Manual.com Manuals
English
02
`
`
`
`
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 23 for the resolution
setting.
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
! caution
`
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.
~ HDMI (High Definition Multimedia Interface)
~ HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
~ HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
~ What is the HDCP?
~ HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
✎ NOTE
`
When a HDMI cable is connected, composite(Video) and component video signals are not output.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+.
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 18)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
✎ NOTE
`
`
`
The Anynet+ function supports some buttons of the remote control.
This function is not available if an HDMI cable does not support CEC.
Depending on your TV, certain HDMI output resolutions may not work.
Downloaded From TheatreSystem-Manual.com Manuals
English
19
Connections
✎ NOTE
Connections
Connecting the fm Antenna
FM Antenna (supplied)
FM ANT.
VIDEO
OUT
HDMI OUT
AUX IN
COMPONENT
OUT
1. Connect the FM antenna supplied to the FM Antenna jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a
wall or other rigid surface.
✎ NOTE
`
This product does not receive AM broadcasts.
0
Downloaded From TheatreSystem-Manual.com Manuals
English
02
Connections
Connecting Audio from external Components
FM ANT.
VIDEO
OUT
White
DIGITAL
AUDIO IN
HDMI OUT
OPTICAL
AUX IN
Optical Cable
(not supplied)
COMPONENT
OUT
Red
Audio Cable (not supplied)
If the external analogue
component has only one Audio
Out, connect either left or right.
Set-Top Box
VCR
OPTICAL
AUX
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
1. Connect AUX IN (Audio) on the back of the product to the Audio Out of the external Analogue
component.
~ Be sure to match the colours of the connecting jacks.
2. Press the FUNCTION button to select AUX input.
~ The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
✎ NOTE
`
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the
external digital component.
2. Press the FUNCTION button to select D.IN.
~ The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM.
Downloaded From TheatreSystem-Manual.com Manuals
English
1
4
5
7
8
6
9
DSP /EQ
0
Setup
Before Starting (Initial Setting)
1. Press the POWER button when it is plugged in
TV for the first time.
Initial Setting screen will be displayed.
Setting the Setup menu
MUTE
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
TUNING
manual may differ,VOLdepending
on
/CH the firmware version.
REPEAT
1
Initial setting > On-Screen Language
DISC MENU
MENU
TITLE MENU
Select a language for the on-screen displays.
English
TOOLS
INFO
RETURN
EXIT
Korean
Dutch
3
French
German
2
Italian
Move
Select
Return
A
TUNER MEMORY
MO/ST
CD RIPPING
B
C
D
DIMMER
S . VOL
4
AUDIO UPSCALE
P .BASS
2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
3. Press the ENTER button to select Start button.
4. Press the ▲▼ buttons to select desired TV Aspect,
then press the ENTER button.
5. Press the ENTER button to select Start button.
✎ NOTE
`
`
`
`
If the HDMI cable is connected to the product, TV aspect
does not appear.
If you want to move to the previous screen, press the
RETURN button.
Once you select a menu language, you can change it by
pressing the STOP (@) button on the remote control for
more than 5 seconds with no disc inserted.
When the Initial Setting screen does not appear, refer to
the Initial Setting. (see page 26)
1
MENU BUTTON : Display the home menu.
2
RETURN BUTTON : Return to the previous
setup menu.
3
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
4
EXIT BUTTON : Exit the setup menu.
Settings
Function
DVD/CD
Selecting the Video Format
Each country has a different video format standard.
You can select the video format either NTSC or PAL.
Press and hold the Number 7 button on the remote
control for over 5 seconds while the product is
urned off.
1. Press the POWER button.
~ "NTSC" or "PAL" will appear on the display. At this
time, press the Number 7 button to select either
"NTSC" or "PAL".
~ The video format of the disc must be the same as
he video format of your TV.
4. Press the $% buttons to select the desired
sub-menu, then press the ENTER button.
2. Press the _+ buttons to select Settings, then
press the ENTER button.
3. Press the $% buttons to select the desired
menu, then press the ENTER button.
5. Press the $% buttons to select the desired
item, then press the ENTER button.
6. Press the EXIT button to exit the setup menu.
Downloaded From TheatreSystem-Manual.com Manuals
English
03
You can configure various display options such as
the TV Aspect, Resolution, etc.
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting.
~ On : The original resolution of the DVD disc will
be output to the TV direct.
~ Off : The output resolution will be fixed
according to the Resolution previously set,
regardless of the resolution of the disc.
✎ NOTE
`
~ 4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
`
`
`
~ 4:3 Letter Box
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
~ 16:9 Wide
You can view the full 16:9 picture on
your widescreen TV.
✎ NOTE
`
`
`
When using HDMI, the screen is automatically converted to the
16:9 Wide mode and TV Aspect is deactivated.
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.
This will optimize the picture quality according
to the content (In the DVD disc, etc) that you
want to play and the product or your BD Wisecompliant Samsung TV.
If you want to change the resolution in BD Wise
mode, you must set BD mode to Off in advance.
If you set the BD Wise mode to Off, the
resolution of the connected TV will be adjusted
to its maximum resolution automatically.
BD Wise will be disabled if the product is
connected to a device that does not support
BD Wise.
Resolution
Sets the output resolution of the HDMI video signal. The
number in 480p(576p), 720p, 1080i and 1080p indicates
the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
~ BD Wise : Automatically sets the optimal resolution when
connected via HDMI to a TV with the BD Wise feature. (The
BD Wise menu item appears only if BD Wise is set to On.)
~ 480p(576p) : Outputs 480 lines of progressive video.
~ 720p : Outputs 720 lines of progressive video.
~ 1080i : Outputs 1080 lines of interlaced video.
~ 1080p : Outputs 1080 lines of progressive video.
✎ NOTE
`
`
If Component or Composite is connected, the
resolution supports only 480i(576i).
1080P may not appear depending on TV.
HDMI Format
BD Wise
(Samsung products only)
BD Wise is Samsung's latest inter-connectivity
feature. When you connect Samsung products with
BD-Wise to each other via HDMI, the optimum
resolution will be set automatically.
You can optimize the colour setting from the HDMI
output. Select a connected device Type.
~ TV : Select if connected to a TV via HDMI.
~ Monitor : Select if connected to a Monitor via HDMI.
Downloaded From TheatreSystem-Manual.com Manuals
English
23
Setup
Display
Setup
Adjusting Front/Rear Speaker Balance
` You can select between 0 and -6.
` The volume decreases as you move closer to –6.
Audio
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Rear
Speakers, as well as Test Tone in this mode.
Delay Time
Settings
Speaker Setting
Speaker Size
▶
Sound Edit
Delay Time
Test Tone
Move Adjusting Centre/Rear/Subwoofer Speaker Level
` The volume level can be adjusted in steps from
+6dB to –6dB.
` The sound gets louder as you move closer to +6dB
and quieter as you get closer to -6dB.
: OFF
Select Return
Select
Return
~ For the Front speakers, the mode is set to Small.
~ For the Subwoofer, the mode is set to Present.
~ For the Centre and Rear speakers, you can switch
the mode to Small or None.
- Small : Select this when using the speakers.
- None : Select this when no speaker is
connected.
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of
the audio signals from the Centre and Rear speakers.
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can
enjoy the best sound if the distance between you
and each speaker is the same.
Since the sounds arrive at the listening position at
different times depending on the placement of
speakers, you can adjust this difference by adding a
delay effect to the Center and Rear Speakers.
Settings
Delay Time
Front
✎ NOTE
`
The speaker mode may vary depending on the
Dolby Pro Logic and Stereo settings.
Center : 00mSEC
Rear
: 10mSEC
Subwoofer
Test Tone
Sound Edit
: OFF
Change Select
Return
Move Select
Return
You can adjust the balance and level for each speaker.
✎ NOTE
Settings
Sound Edit
Front Bal.
dB L
R
dB
Rear Bal.
dB L
R
dB
Center Level
dB
Rear Level
dB
SW Level
dB
`
The Delay Time menu will be activated only when a 5.1
channel source is played.
`
You can not set Centre and Rear in this mode when
their Speaker Size is set to None.
Change Select
Return
Move Select
Return
Press the $% buttons to select and adjust the
desired speaker.
Press the _+ buttons to adjust the settings.
24
Downloaded From TheatreSystem-Manual.com Manuals
English
03
Setup
Ideal Centre
Speaker placement
Test Tone
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
Ideal Rear
Speaker placement
Place all speakers within this circle.
Df: The distance from Front Speaker
Dc: The distance from Centre Speaker
Dr: The distance from Rear Speaker
Setting the Centre Speaker
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m
Df and Dc
Delay
Time
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
Move : On
▶
Select Return
Select
Return
Use the Test Tone feature to check the speaker
connections.
~ Press the _+ buttons to select ON.
~ The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Rear Right ➞ Rear Left ➞
Subwoofer in order.
To stop the test tone, press the ENTER button.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
~ You can select either off, 2/8, 4/8, 6/8, Full
AV-SYNC
Setting the Rear Speaker
If the distance of Dc is equal to or longer than the
distance of Dr in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
between 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
Dr and Dc
Delay
Time
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
✎ NOTE
`
`
`
With
PL II (Dolby Pro Logic II), the delay time
may be different for each mode.
With AC-3 and DTS, the delay time can be set
between 00 and 15mSEC.
The Centre channel is only adjustable on 5.1
channel discs.
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
~ You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
~ On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
ideo is transmitted over the HDMI
~ Off : V
connection cable only, and audio is output
through the product speakers only.
Downloaded From TheatreSystem-Manual.com Manuals
English
25
Setup
✎ NOTE
`
`
`
✎ NOTE
The default setting of this function is HDMI Audio Off.
HDMI Audio is automatically down-mixed to 2ch
for TV speakers.
When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.
EQ Optimizer
Set optimal EQ automatically depending on
the region.
~ Off: Turn EQ Optimizer off.
~ On: Turn EQ Optimizer on.
System
Initial Setting
By using the Initial Setting, you can set the language and
TV aspect.
✎ NOTE
`
If an HDMI cable is connected to the product,
the TV aspect does not appear and it is set to
16:9 Wide automatically.
`
The selected language will only appear if it is
supported on the disc.
Security
The Parental Lock function works in conjunction with
DVDs that have been assigned a rating, which helps you
control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Parental Rating
Select the rating level you want to set.
A larger number indicates that the program is intended
for adult use only. For example, if you select up to Level
6, discs that contain Level 7, 8 will not play.
Enter the password and then press the ENTER button.
- The password is set to "7890" by default.
- Once the setup is complete, you will be taken to the
previous screen.
Change Password
Select Change and enter the 4-digit password to set
the parental lock using the number buttons on the
remote control.
DivX(R) Registration
Settings
Display
Perental : Off
View DivX(R) VOD Registration Code to purchase
Audio
Password : Change and play DivX(R) VOD content.
Laguage
▶
System
Security
Support
Language
You can select the language you prefer for on-screen
menu, disc menu, etc.
OSD
Language
Disc Menu
Audio
Subtitle
Select the language for the on-screen
displays.
Select the language for the disc
menu displays.
Select the language for disc audio.
Select
Return
If you forgot your password
1. Remove the disc.
2. Press and hold the STOP (@) button on the
remote control for 5 seconds or more. All
settings will revert to the factory settings.
Select the language for disc subtitles.
a T
o select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the country code. (see page 37).
a You cannot select OTHERS in the OSD Language
menu.
26
Move Support
Product Information
Product information such as Model code, Software
Version, etc. is provided.
Downloaded From TheatreSystem-Manual.com Manuals
English
Audio CD(CD-DA)/MP3/WMA Playback
1. Press the OPEN/CLOSE (^) button.
BA
2. Place a disc gently into the tray with the disc's
label facing up.
3. Press the OPEN/CLOSE (^) button to close
the disc tray.
Track01
1/17
✎ NOTE
`
Resume function: When you stop disc play, the
product remembers where you stopped, so when
you press PLAY button again, it will pick up
where you left off. (This function works only with
DVDs.)
Press the STOP button twice during playback to
disable the Resume function.
`
If no buttons are pressed on the product or
remote control for more than 3 minutes when the
product is in Pause mode, it will change to STOP
mode.
`
The initial screen may appear different, depending
on the content of the disc.
`
Pirated discs will not play in this product because
they violate the CSS(Content Scrambling System:
a copy protection system) recommendations.
※ will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
~ If the product is left in the stop mode for more
than 5 minutes without being used, a screen saver
will appear on your TV.
~ If the product is left in the screen saver mode for
more than 25 minutes, the power will
automatically turn off (Automatic Power-Off
Function).
0:15 / 3:59
Function DVD/CD
Repeat Play Mode
1. Insert an Audio CD(CD-DA) or an MP3 Disc into the
disc tray.
~ For an Audio CD, the first track will be played
automatically.
- Press the [] buttons to move to the
previous/next track.
~ For the MP3/WMA disc, press the _+
buttons to select Music, then press the
ENTER button.
- Press the $%_+ buttons to select a
desired file and press the ENTER button.
- Press the () buttons to move to the
previous/next pages.
2. Press the STOP (@) button to stop playback.
✎ NOTE
`
`
`
Downloaded From TheatreSystem-Manual.com Manuals
Some MP3/WMA-CDs may not play, depending on
the recording mode.
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
English
27
Basic Functions
Disc Playback
04
Basic Functions
Basic Functions
JPEG File Playback
Using the Playback Function
Images captured with a digital camera or camcorder, or
JPEG files on a PC can be stored on a CD and then
played back with this product.
Forward/Reverse Search
BDA
1. Insert a JPEG disc on the disc tray.
2. Press the _+ buttons to select Photo, and
then press the ENTER button.
Press the () buttons for Search Function.
3. Press the $% buttons to select the folder you
want to play, and then press the ENTER button.
4. Press the ▲▼ buttons to select the photo you
want to play, and then press the ENTER button.
~ The selected file will play and slide show will
start.
~ To stop slide show, press the PAUSE (#)
button.
~ You can view the previous/next file by
pressing the ◄,► buttons during the
slideshow mode.
(
1➞(2➞(3➞(4
) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
✎ NOTE
`
During the fast playback of the CD, sound is only
heard at 1 and 2 step speed.
`
No sound is heard during the fast playback of the
DVD/DivX.
Skipping Scenes/Songs
BAD
../ PICTURES
JPEG 1
JPEG 2
Press the [] buttons.
~ Each time the button is pressed during playback,
the previous or next chapter, track or directory
(file) will be played.
~ You cannot skip chapters consecutively.
JPEG 3
642 X 352
2010/01/01
Function DVD/CD
Pages
Return
Slow Motion Play
D
Rotate Function
G
Press the PAUSE (#) button and then ) button for
Slow Motion play.
Press the GREEN(B) or YELLOW(C) button during the
PAUSE mode.
~ GREEN(B) Button: Rotate 90° counterclockwise.
~ YELLOW(C) Button: Rotate 90° clockwise.
✎ NOTE
`
The maximum resolutions supported by this
product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0
MPixel) for progressive image files.
28
*1 ➞*2 ➞*3
D
✎ NOTE
`
`
No sound is heard during slow playback.
Reverse slow playback does not work.
Downloaded From TheatreSystem-Manual.com Manuals
English
*1 ➞*2 ➞*3
0
04
Using the Title Menu
D
TUNING
For DVDs containing multipleVOL
titles, you can view
/CH the
REPEAT
title of each movie.
Press the PAUSE button repeatly.
~ The picture moves forward one frame each time
the button is pressed during playback.
1.
✎ NOTE
`
D
`
SLEEP
Depending on the disc, menu setup items may
vary and this menu mayRETURN
not be available. EXIT
2
3
5
6
7
8
9
You can operate this function only on the DivX.
0
✎ NOTE
INFO
✎ NOTE
DVD RECEIVER/TV
During playback, press the _,+ button.
1
~ Playback skips 5 minutes forward whenever you
press the + button.
4
~ Playback skips 5 minutes backward whenever
you press the _ button.
`
During playback, press the TITLE MENU
MENU
MENU
TITLE MENU
button on the remote DISC
control.
2. Press the $%_+ buttons to make
the desired selection, then press the
TOOLS
FUNCTION
ENTER
TV SOURCEbutton.
No sound is heard during step motion playback.
POWER
5 Minute Skip function
MUTE
A
DIMMER
TUNER MEMORY
MO/ST
CD RIPPING
B
C
D
S . VOL
AUDIO UPSCALE
P .BASS
DSP /EQ
Using the Disc Menu
MUTE
VOL
You can view the menus for the audio language,
subtitle language, profile, etc.
1. During playback, press the DISC
MENU button on the remote control.
2. Press the $%_+ buttons to make
the desired selection, then press the
ENTER button.
TUNING
/CH
REPEAT
DISC MENU
MENU
TITLE MENU
TOOLS
INFO
✎ NOTE
`
Depending on the disc, menu setup items RETURN
may
vary and this menu may not be available.
A
DIMMER
EXIT
TUNER MEMORY
MO/ST
CD RIPPING
B
C
D
S . VOL
AUDIO UPSCALE
P .BASS
Downloaded From TheatreSystem-Manual.com Manuals
English
29
Basic Functions
Step Motion Play
POWER
TV SOURCE
Basic Functions
DVD RECEIVER/TV
Repeat Playback
SLEEP
1
3A-B Repeat Playback
2
4
5
BAD
7
DVD/DivX Repeat
You can repeatedly play back a designated section
8
9of a DVD or CD.
DSP /EQ
You can repeat the title, chapter or the section(A-B
0
Repeat) of the DVD/DivX.
Repeat
1. During the DVD disc or CD playback, press the
REPEAT button on the remote control.
2. For DVD, press the $% buttons to select A-.
For CD press the REPEAT button repeatedly
until
appears.
OFF
3. Press the ENTER button at the point where you
want repeat play to start (A).
MUTE
4. Press the ENTER button at the point where you
want repeat play to stop (B).
VOL
TUNING
/CH
5. To return to normal playback,
For DVD, press the $% buttons to select to OFF.
For CD, press the REPEAT button to select to .
TITLE MENU
REPEAT
1. During DVD/DivX playback, press the
REPEAT button on the remote
control.
DISC MENU
2. Press the $% buttons to select a
desired repeat mode, then press the
ENTER button.
TOOLS
MENU
✎ NOTE
`
INFO
3. Press the ▲▼ buttons to select OFF to return
to normal play, then press the ENTER button.
Z
D
Title ➞ Chapter ➞ A - ➞ Off
RETURN
TUNER MEMORY
MO/ST
CD RIPPING
B
C
D
A
DIMMER
S . VOL
1. During the CD/ MP3 playback, press the
REPEAT button repeatedly to select the repeat
mode you want.
A
0
;
;
;
The A-B Repeat function does not operate with
DivX, MP3 or JPEG discs.
EXIT
Track ➞ Dir (Directory) ➞ Disc ➞ Off
CD/MP3 Repeat
B
B
6
AUDIO UPSCALE
P .BASS
;
(Normal ; Repeat Track ; Repeat All ;
Random ; Repeat Section A-B)
;
;
;
;
(Normal ; Repeat Track;
Repeat Dir ; Repeat All; Random)
Downloaded From TheatreSystem-Manual.com Manuals
English
2
3
4
5
6
7
8
04
1
D
9
0
03/04
001/001
MUTE
0:00:21
KO 1/2
EN 02/02
VOL
1/1
Change
Select
DISC MENU
): Refers to the film's
soundtrack language. A DVD Disc can
contain up to 8 audio languages.
` Subtitle(
): Refers to the subtitle
languages available in the disc. You will
be able to choose the subtitle languages
or, if you prefer, turn them off from the
screen. A DVD Disc can contain up to
32 subtitle languages.
` Angle(
): When a DVD contains
TUNING
multiple angles of a particular scene, you
/CH
can use the Angle function.
/EQ
` DSP
Audio(
REPEAT
MENU
TITLE MENU
Selecting the Audio Language
1. During playback, press the TOOLS
button on the remote control.
TOOLS
INFO
D
2. Press the $% buttons to select the
desired item.
1. Press
RETURN
EXIT the TOOLS button.
3. Press the _+ buttons to make the desired
setup change and then press the ENTER
2. Press the $% buttons to select AUDIO (
)
TUNER MEMORY MO/ST CD RIPPING
button.
display.
A
B
C
D
- You may use the number buttons of the
3. AUDIO
Press
the _+ buttons or numeric buttons to
S . VOL
UPSCALE
remote control to control some items.DIMMER
select
P .BASS the desired audio language.
4. To make Disc information disappear, press the
~ Depending on the number of languages on a
TOOLS button again.
DVD disc, a different audio language is
selected each time the button is pressed.
NOTE
` If you are playing contents from the tools menu, some
functions may not be enabled depending on the disc.
` You can also select DTS, Dolby Digital or Pro Logic,
depending on the disc.
` Some tools menus may differ depending on discs and
files.
✎
TOOLS menu
) : To access the desired title
when there is more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified as a Title.
` Chapter(
) : Most DVD discs are
recorded in chapters so that you can
quickly find a specific chapter.
` Playing time( ) : Allows playback of
the film from a desired time. You must
enter the starting time as a reference.
The time search function does not
operate on some discs.
` Title(
Downloaded From TheatreSystem-Manual.com Manuals
English
1
Basic Functions
Displaying Disc Information
Basic Functions
Selecting the Subtitle Language
Angle Function
D
1. Press the TOOLS button.
2. Press the $% buttons to select SUBTITLE (
display.
)
3. Press the _+ buttons or numeric buttons to
select the desired subtitle language.
~ Depending on the number of languages on a
DVD disc, a different subtitle language is
selected each time the button is pressed.
`
Depending on the disc, the Subtitle and Audio
Language functions may not be available.
On the DivX file format, the subtitle languages
may be represented by only numbers.
Caption Function
D
~ To use the caption function, save the caption file
(*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder.
Example. RootSamsung_007CD1.avi
Samsung_007CD1.smi
~ Up to 60 alphanumeric characters or 30 East
Asian characters (2 byte characters such as
Korean and Chinese) for the file name.
~ The subtitle of DivX files are *.smi, *.sub, *.srt over
148 kbyte is not supported.
4
5
6
7
8
9
0
This function allows you to view the same scene in
different angles.
1. Press the TOOLS button.
2. Press the $% buttons to select ANGLE (
MUTE
display.
)
3. Press the _+ buttons or numeric buttons to
TUNING
select the desired angle.
VOL
`
/CH
REPEAT
✎ NOTE
The Angle function works
onMENU
DISC MENUonly with
MENU discs
TITLE
which multiple angles have been recorded.
TOOLS
Sound
Mode
INFO
P.BASS
TUNER MEMORY
MO/ST
EXIT
CD RIPPING
The MP3 ENHANCE function provides better sound
A
B
C
D
quality by upscaling the sampling frequency.
DIMMER
S . VOL
AUDIO UPSCALE
Press the P.BASS button.
2 Channel
LPCM source
POWER BASS ON ➞
POWER BASS OFF
MP3 file
POWER BASS ON ➞
POWER BASS OFF ➞
MP3 ENHANCE ON
P .BASS
✎ NOTE
`
`
`
The P.BASS function is only available with 2
channel LPCM sources such as MP3, Divx, CD
and WMA.
The P.BASS function does not work with DSP/EQ
or Dolby Pro Logic ll modes.
If you press P.BASS in the DSP/EQ mode, the
DSP/EQ mode is automatically shut off and the
P. BASS function will be turned on.
The MP3 Enhancement function is only available
with MP3 files.
Downloaded From TheatreSystem-Manual.com Manuals
English
3
The P.BASS function provides
RETURNa bass boost to
reinforce the low frequencies.
~ You must have some experience with video
extraction and editing in order to use this feature
properly.
32
2
DSP /EQ
✎ NOTE
`
1
SLEEP
FUNCTION
TV SOURCE
DSP (Digital Signal Processor)/EQ
Dolby Pro Logic II Mode
1 : DVD
2RECEIVER/TV
~ DSP (Digital Signal Processor)
DSP
modes3have
been designed to simulate different acoustic
environments.
4
5
6
~ EQ : You can select ROCK, POP, or1CLASSIC2etc.
to optimize the sound for the genre of music you are
7
8
9
playing.
4
0
7
Press the DSP/EQ button.
2
4
5
can select the desired Dolby Pro Logic II audio
7
mode.
3Press the
5
6
8
9
DSP /EQ
1
You
SLEEP
MUSIC
DSP /EQ
0
When listening to music, you can
experience sound effects as if you are
listening to the actual performance.
CINEMA
Adds realism to the movie soundtrack.
STUDIO
Provides a sense of presence as if in a
studio.
PROLOG
You will experience a realistic multichannel effect while using just the front
left and right speakers.
DISC MENU
CLUB
Simulates VOL
the sound of a dance
club
/CHMUTE
REPEAT
with a throbbing bass
beat.
MATRIX
You will hear multi-channel surround
sound.
HALL
Provides a clear vocal as if listening in a
DISC MENU
MENU
TITLE MENU
TUNING
concert hall.
VOL
MOVIE
Provides the feeling of a movie cinema.
TOOLS
CHURCH
PASS
VOL
INFO
Provides the feelingDISC
of MENU
being inMENU
a
grand church.
RETURN
✎ NOTE
INFO
TUNER MEMORY
MO/ST
CD RIPPING
D
RETURN
S . VOL
AUDIO UPSCALE
This will regulate and stabilize the volume level
P .BASS
MEMORY MO/ST
against a drastic volume change whenTUNER
changing
A
B
C
channels or during a scene transition.
Press the S.VOL button.
`
EXIT
S.vol (smartA volume)
B
C
DIMMER
STEREO
TITLE MENU
Select this for normalTOOLS
listening.
DIMMER
S . VOL
EXIT
MUTE
REPEAT
TUN
/C
MENU
TITLE
TOOLS
/CH
REPEAT
`
IN
Select this to listen to sound from the
front left and right speakers and the
subwoofer only.
RETURN
E
When selecting Pro Logic II mode, connectTUNER MEMORY MO/ST CD
A
B
C
your external device to the AUDIO INPUT jacks
DIMMER
S . VOL
AUDIO
(L and R) on the product. If you connect to only
P .B
one of the inputs (L or R), you cannot listen to
surround sound.
The Pro Logic II function is only available in
Stereo mode.
CD RIPPING
D
AUDIO UPSCALE
P .BASS
~ Each time the button is pressed, the
selection changes as follows :
SMART VOLUME ON ➞ SMART VOLUME OFF
Downloaded From TheatreSystem-Manual.com Manuals
9
DS
0
Select POPS, JAZZ, or ROCK,
depending on the genre of music
you're listening to.
TUNING
6
8
PL II button.
POPS,
JAZZ,
ROCK
MUTE
3
Basic Functions
POWER
SL
04
DVD RECEIVER/TV
DVD RECEIVER/TV
FUNCTION
TV SOURCE
POWER
English
33
FUNCTION
TV SOURCE
POWER
Basic Functions
DVD RECEIVER/TV
SLEEP
Listening to Radio
Using buttons on the Remote Control
1
2
3
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
4
5
6
7
8
9
~ Automatic Tuning 1 : When the [ ] buttons
is pressed, a preset broadcast station is selected.
~ Automatic Tuning 2 : Press and hold the
TUNING/CH (,,. ) buttons to automatically DSP /EQ
search for active broadcasting stations.
0
~ Manual Tuning : Press the TUNING/CH (,,. )
buttons to increase or decrease the frequency
incrementally.
Using buttons on the product
1. Press the FUNCTION (
FM.
) buttonMUTE
to select
DISC MENU
MENU
TOOLS
INFO
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
RETURN
EXIT
2. Press the TUNING/CH (,,. ) buttons
to select
<89.10>.
3. Press the TUNER MEMORY button. TUNER MEMORY MO/ST CD RIPPING
B
C
D
~ Number flashes on the display.A
DIMMER
S
.
VOL
AUDIO
UPSCALE
4. Press the [ ] buttons to select
P .BASS
preset number.
~ You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
~ Press the TUNER MEMORY button before
number disappears from the display.
~ Number disappears from the display and the
station is stored in memory.
FUNCTION
POWER
TV SOURCE
6. To preset another station, repeat steps 2 to 5.
~ To tune in to a preset station, press the [ ]
buttons on the remote
control to select a channel.
DVD RECEIVER/TV
SLEEP
2. Select a broadcast station.
~ Automatic Tuning 1 :VOL
Press the STOP ( @ TUNING
)
ECHO
button to select PRESET and then
press the /CH
REPEAT
RDS DISPLAY
Connecting Microphone
[ ] buttons to select the preset station.
2
1
3
You can enjoy the feeling of a karaoke bar in the
~ Automatic Tuning 2 : Press the STOP ( @ )
DISC MENU
MENU
TITLE MENUcomfort of your home.
button to select MANUAL and then press and
4
5
6
hold the [ ] buttons to automatically
Watch the video and sing along the lyrics displayed
search the band.
on the TV screen against the accompaniment.
7
8 FUNCTION
9
~ Manual Tuning : Press
the STOP ( @ ) button INFO
TOOLS
POWER
TV SOURCE
DSP /EQ
to select MANUAL and then press the [ ]
1. Connect the microphone to the
0 MIC jack on
buttons to tune in to a lower or higher
the front panel.
frequency.
DVD RECEIVER/TV
SLEEP
RETURN
EXIT
Setting Mono/Stereo
Press the MO/ST button.
A
TUNER MEMORY
MO/ST
B
C
ECHO
2. Press the ECHO RDS
button
DISPLAY to adjust
the echo level of the1microphone.
2
CD RIPPING
3
MUTE
4
MIC VOL+
5
6
D 3. Press the MIC VOL button to
adjust the voice volume
of the
7VOL REPEAT
8
microphone.
~ Each time the button is pressed, the
AUDIO UPSCALE
sound switches betweenDIMMER
STEREO S . VOL
P .BASS
and MONO.
~ In a poor reception area, select
MONO for a clear, interference-free broadcast.
DISC MENU
TUNING
/CH
9
DSP /EQ
0MENU
MIC VOLTITLE MENU
TOOLS
INFO
MUTE
34
Downloaded From TheatreSystem-Manual.com Manuals
English
TITLE MENU
RETURN
VOL
MIC VOL+
EXIT
TUNING
/CH
REPEAT
TUNER MEMORY MO/ST
CD RIPPING
DISC MENU
CD ripping
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 5.1
channel sound by connecting the storage device to
the USB port of the product.
MIC 1
MIC 2
1. Connect the USB device to the USB port on the
front panel of the product.
2. Press the FUNCTION button to select USB.
~ USB appears on the display screen and then
disappears.
B
Converts audio sound of the CD into a MP3 file
format before sending
to a USB storage device.
RETURN
EXIT
1. Connect the USB device to your product.
2. Insert the audio CD into
CD MO/ST
tray. CD RIPPING
TUNERthe
MEMORY
3. Press the CD RIPPING
button.
A
B
C
D
~ To start ripping the current track,
DIMMER
S . VOL
AUDIO UPSCALE
press the CD RIPPING button on
P .BASS
the remote control while the system
is playing a track or stopped temporarily.
~ To rip the entire CD, press and hold the CD
RIPPING button on the remote control.
-"FULL CD RIPPING" appears on the display
and ripping starts.
4. Press the STOP (@) button to stop ripping.
~ When the CD ripping is done, a directory
named "RIPPING" will be created in the USB
device and the ripped file will be saved in a
format of "SAM-XXXX”.MP3".
✎ NOTE
`
3. Press the _+ buttons to select Videos, Music
or Photo.
- Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the
USB device, perform safe removal before
disconnecting the USB cable.
~ Press the YELLOW(C) button.
- REMOVE will appear on the display.
~ Remove the USB cable.
✎ NOTE
`
To listen to your music files with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 33)
`
Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
INFO
`
`
`
`
`
`
`
`
Downloaded From TheatreSystem-Manual.com Manuals
Do not disconnect the USB connection or the power cable
during the CD ripping. Otherwise, it may cause damage to the
data. To stop CD ripping, press the STOP button and
disconnect the USB device after the system stops playing the
CD completely.
If you disconnect the USB connection during the CD ripping,
the system will turn off and you will not be able to delete the
ripped file.
If you connect the USB device to the system while it is playing
a CD, the system stops temporarily and will play again.
DTS-CDs cannot be ripped.
If the ripping duration is less than 5 seconds, a ripping file may
not be created.
CD ripping works only if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system is not
supported.)
For a list of compliant devices, refer to the specification of the
USB host.
The ripping is performed at a normal speed of x3. The ripping
time may be longer with some USB devices.
While the system is ripping a CD, the audio sound will not be
output.
Do not put touch or move the system while it is ripping a CD.
English
Advanced Functions
TOOLS
uSB function
Playing Media Files using the
USB Host Feature
TITLE MENU
05
Advanced Functions
MENU
Other Information
Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are experiencing is
not listed below or if the instruction below does not help, turn off the product, disconnect the power cord,
and contact the nearest authorized dealer or Samsung Electronics Service Centre.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step motion playback.
• A re the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only from a
few speakers and not all 6.
• On certain DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When listening to a CD, radio or TV, sound is output to the front speakers only.
Select "PROLOG" by pressing
PL II (Dolby Pro Logic II) on the remote control to
use all six speakers.
Dolby Digital 5.1 CH Surround
Sound is not produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?
The remote control does not work.
• Is the remote control being operated within its operation range of angle and distance?
• Are the batteries drained?
• H ave you selected the mode (DVD RECEIVER/TV) functions of the remote control (DVD RECEIVER/TV)
correctly?
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Audio language and subtitles do not work.
• A udio language and subtitles will not work if the disc does not contain them.
The Disc/Title menu screen does not
appear even when the Disc/Title
function is selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN
SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc
jacket and then select the appropriate function.
36
Downloaded From TheatreSystem-Manual.com Manuals
English
06
Other Information
Symptom
Check/Remedy
• The product is not working.
(Example: The power goes out or
the front panel key doesn't work
or a strange noise is heard.)
• The product is not working
normally.
The rating level password has been
forgotten.
Can't receive radio broadcast.
• Press and hold the STOP (@) button on the remote control for longer than
5 seconds with no disc (reset function).
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of the product, press and hold the
remote control's STOP (@) button for longer than 5 seconds. “INIT” appears on the
display and all settings will return to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with good
reception.
Country code list
Enter the appropriate code number for OTHERS in the Disc Menu, Audio and Subtitle. (See page 26).
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1142
Greek
1239
Interlingue
1345
Malagasy
1482
Kirundi
1527
1028
Abkhazian
1144
English
1245
Inupiak
1347
Maori
1483
Romanian
1528
Thai
1032
Afrikaans
1145
Esperanto
1248
Indonesian
1349
Macedonian
1489
Russian
1529
Tigrinya
1039
Amharic
1149
Spanish
1253
Icelandic
1350
Malayalam
1491
Kinyarwanda
1531
Turkmen
1044
Arabic
1150
Estonian
1254
Italian
1352
Mongolian
1495
Sanskrit
1532
Tagalog
1045
Assamese
1151
Basque
1257
Hebrew
1353
Moldavian
1498
Sindhi
1534
Setswana
1051
Aymara
1157
Persian
1261
Japanese
1356
Marathi
1501
Sangro
1535
Tonga
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
Bashkir
1166
Fiji
1283
Javanese
1358
Maltese
1503
Singhalese
1539
Tsonga
1057
Byelorussian
1171
Faeroese
1287
Georgian
1363
Burmese
1505
Slovak
1540
Tatar
1059
Bulgarian
1174
French
1297
Kazakh
1365
Nauru
1506
Slovenian
1543
Twi
1060
Bihari
1181
Frisian
1298
Greenlandic
1369
Nepali
1507
Samoan
1557
Ukrainian
1069
Bislama
1183
Irish
1299
Cambodian
1376
Dutch
1508
Shona
1564
Urdu
1066
Bengali;
Bangla
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
Tibetan
1194
Galician
1301
Korean
1393
Occitan
1511
Albanian
1581
Vietnamese
1070
Breton
1196
Guarani
1305
Kashmiri
1403
(Afan) Oromo
1512
Serbian
1587
Volapuk
1079
Catalan
1203
Gujarati
1307
Kurdish
1408
Oriya
1513
Siswati
1613
Wolof
1093
Corsican
1209
Hausa
1311
Kirghiz
1417
Punjabi
1514
Sesotho
1632
Xhosa
1097
Czech
1217
Hindi
1313
Latin
1428
Polish
1515
Sundanese
1665
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
Chinese
1105
Danish
1229
Hungarian
1327
Laothian
1436
Portuguese
1517
Swahili
1697
Zulu
1109
German
1233
Armenian
1332
Lithuanian
1463
Quechua
1521
Tamil
1130
Bhutani
1235
Interlingua
1334
Latvian,
Lettish
1481
RhaetoRomance
1525
Tegulu
Downloaded From TheatreSystem-Manual.com Manuals
Tajik
English
37
Other Information
Specifications
General
FM Tuner
HDMI
2.6 Kg
430 (W) x 60 (H) x 290 (D) mm
+5°C~+35°C
10 % to 75 %
70 dB
10 dB
0.5 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
480i(576i)
1 channel : 1.0 Vp-p (75 Ω load)
480i(576i)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
1080p, 1080i, 720p, 480p(576p)
Front speaker output
83W x 2(3Ω)
Centre speaker output
83W(3Ω)
Rear speaker output
83W x 2(3Ω)
Subwoofer output
85W(3Ω)
Frequency range
20Hz~20KHz
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)400mV
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
DVD (Digital Versatile Disc)
Disc
CD : 12 cm (COMPACT DISC)
CD : 8cm (COMPACT DISC)
Composite Video
Video Output
Component Video
Video/Audio
Amplifier
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For the power supply and Power Consumption, refer to the label attached to the product.
38
Downloaded From TheatreSystem-Manual.com Manuals
English
06
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
5.1ch speaker system
Front
Rear
Centre
3Ω
3Ω
3Ω
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz
86dB/W/M
86dB/W/M
86dB/W/M
83W
83W
83W
166W
166W
166W
Front : 90 x 141.5 x 68.5 mm
Rear : 84 x 104.5 x 68.5 mm
Centre : 360 x 74.5 x 68.5 mm
Subwoofer : 155 x 350 x 285 mm
Front: 0.58 Kg, Centre : 0.57 Kg
Rear : 0.4 Kg, Subwoofer : 3.8 Kg
Subwoofer
3Ω
40Hz~160Hz
88dB/W/M
85W
170W
HT-C453
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
5.1ch speaker system
Front
Rear
Centre
Subwoofer
3Ω
3Ω
3Ω
3Ω
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
86dB/W/M
86dB/W/M
86dB/W/M
88dB/W/M
83W
83W
83W
85W
166W
166W
166W
170W
Front : 90 x 1200 x 119 mm (stand base : 250 x 250)
Rear : 84 x 104.5 x 68.5 mm
Centre : 360 x 74.5 x 68.5 mm
Subwoofer : 155 x 350 x 285 mm
Front : 2.77 Kg, Centre : 0.57 Kg Rear : 0.4 Kg, Subwoofer : 3.8 Kg
HT-C455
Speaker system
Speaker
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
5.1ch speaker system
Front/Rear
3Ω
140Hz~20KHz
86dB/W/M
83W
166W
Centre
3Ω
140Hz~20KHz
86dB/W/M
83W
166W
Subwoofer
3Ω
40Hz~160Hz
88dB/W/M
85W
170W
Dimensions (W x H x D)
Front/Rear : 90 x 1200 x 119 mm (stand base : 250 x 250)
Centre : 360 x 74.5 x 68.5 mm
Subwoofer : 155 x 350 x 285 mm
Weights
Front/Rear : 2.77 Kg, Centre : 0.57 Kg Subwoofer : 3.8 Kg
Downloaded From TheatreSystem-Manual.com Manuals
English
39
Other Information
HT-C450
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
Contact Center 
` North America
Canada
1-800-SAMSUNG (726-7864)
Mexico
01-800-SAMSUNG (726-7864)
U.S.A
1-800-SAMSUNG (726-7864)
` Latin America
Argentine
0800-333-3733
0800-124-421
Brazil
4004-0000
Chile
800-SAMSUNG (726-7864)
Nicaragua
00-1800-5077267
Honduras
800-7919267
Costa Rica
0-800-507-7267
Ecuador
1-800-10-7267
El Salvador
800-6225
Guatemala
1-800-299-0013
Jamaica
1-800-234-7267
Panama
800-7267
Puerto Rico
1-800-682-3180
Rep. Dominica 1-800-751-2676
Trinidad &
1-800-SAMSUNG (726-7864)
Tobago
Venezuela
0-800-100-5303
Colombia
01-8000112112
` Europe
0810 - SAMSUNG
Austria
(7267864, € 0.07/min)
Belgium
Czech
Denmark
Finland
France
Germany
Hungary
Italia
Luxemburg
Netherlands
Norway
Poland
Portugal
Slovakia
Spain
Sweden
U.k
Eire
02-201-24-18
800 - SAMSUNG
(800-726786)
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG
(726-7864 € 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
261 03 710
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
022-607-93-33
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902 - 1 - SAMSUNG
(902 172 678)
0771 726 7864 (SAMSUNG)
0845 SAMSUNG (7267864)
0818 717100
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/
be (Dutch)
www.samsung.com/
be_fr (French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Area
Switzerland
Lithuania
Latvia
Estonia
` CIS
Russia
Georgia
Armenia
Azerbaijan
Kazakhstan
Uzbekistan
Kyrgyzstan
Tadjikistan
Contact Center 
Web Site
www.samsung.com/ch
0848 - SAMSUNG (7267864, www.samsung.com/
CHF 0.08/min)
ch_fr/ (French)
8-800-77777
www.samsung.com
8000-7267
www.samsung.com
800-7267
www.samsung.com
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
Ukraine
0-800-502-000
Belarus
Moldova
` Asia Pacific
Australia
New Zealand
810-800-500-55-500
00-800-500-55-500
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
1300 362 603
www.samsung.com
0800 SAMSUNG (0800 726 786) www.samsung.com
400-810-5858
China
www.samsung.com
010-6475 1880
www.samsung.com/
hk
Hong Kong
(852) 3698-4698
www.samsung.com/
hk_en/
3030 8282
1800 110011
India
www.samsung.com
1800 3000 8282
1800 266 8282
0800-112-8888
Indonesia
www.samsung.com
021-5699-7777
Japan
0120-327-527
www.samsung.com
Malaysia
1800-88-9999
www.samsung.com
1-800-10-SAMSUNG
(726-7864)
1-800-3-SAMSUNG
Philippines
(726-7864)
www.samsung.com
1-800-8-SAMSUNG
(726-7864)
02-5805777
Singapore
1800-SAMSUNG (726-7864) www.samsung.com
1800-29-3232
Thailand
www.samsung.com
02-689-3232
Taiwan
0800-329-999
www.samsung.com
Vietnam
1 800 588 889
www.samsung.com
` Middle East & Africa
Turkey
444 77 11
www.samsung.com
South Africa
0860-SAMSUNG (726-7864) www.samsung.com
U.a.e
800-SAMSUNG (726-7864)
www.samsung.com
Bahrain
8000-4726
Jordan
800-22273
Downloaded From TheatreSystem-Manual.com Manuals
AH68-02259K
Downloaded From TheatreSystem-Manual.com Manuals